Argon DAB 4+ DAB radio User manual

The Argon Audio 7340A v2 is a compact and versatile active speaker that delivers exceptional sound quality for its size. With its built-in amplifier and 3/4-inch silk dome tweeter, it produces clear and detailed highs, while the 4-inch woofer provides deep and powerful bass. It's perfect for use in small to medium-sized rooms, and can be used for a variety of purposes, including listening to music, watching movies, or gaming.

PDF Download

Document

Argon DAB4+
Quality has always been our driving force
and founding Argon Audio is a natural
extension of this philosophy. We have
20 years of experience in creating and
specifying high quality products,
manufacturing them and selling them on
to end users with Value-for-Money as the
primary aim. And Argon Audio is a brand
fully compliant with these values.
Design, features and quality standards are
all specified in Denmark and manufacturing
takes place in the Far East, where quality
vendors are highly competitive - and as a
result supply outstanding Value-for-Money
products – to the delight of both ourselves
and our customers!
DAB4+
1
Contents
Argon DAB4+ Quick start Guide and Manual
Your Argon DAB4+.....................................................................................................................page 4-6
Quick Start - Setting up and connecting your DAB4+...................................................page 7-8
Power-Up your DAB4+.....................................................................................page 7
Tuning DAB stations.........................................................................................page 7
Tuning FM stations............................................................................................page 7
Connecting an external devise using AUX in..........................................page 8
Using batteries and battery life time..........................................................page 8
Using your DAB4+.......................................................................................................................page 9-10
DAB mode and Tuning DAB stations..........................................................page 9
Viewing additional display information....................................................page 9
FM mode and Tuning FM stations...............................................................page 10
Viewing additional display information....................................................page 10
Selecting audio mode (stereo or mono)...................................................page 10
Using basic functions on your DAB4+.................................................................................page 11-15
Storing and recalling stations........................................................................page 11
Sorting stations (DAB mode).........................................................................page 11
Auto “Enter/select”............................................................................................page 11
Setting the date and time...............................................................................page 12
Setting the Alarm...............................................................................................page 12
Setting the Sleep Timer...................................................................................page 13
Setting the Snooze function..........................................................................page 13
Resetting the DAB4+........................................................................................page 14
Software version................................................................................................page 14
Contrast setting..................................................................................................page 14
Using the AUX IN jack.......................................................................................page 15
Using the LINE OUT/HEAD PHONE jack.....................................................page 15
...............................................................................................................page 16
2
DAB4+
A few warnings, hints and tips:
Instructions: Read (even though its very boring), follow and maintain this Manual
Water and Moisture: Keep the DAB4+ out of and away from water and moisture
Heat: Do not expose the DAB4+ to excessive heat or sunlight.
Notice that the color of the casing can fade if placed directly in sunlight for prolonged period of time.
Battery usage:
If the Battery Power ON/OFF buttom is left in “ON” position the
DAB4+ will continue to consume battery power even though it is used on the Electric Outlet.
If the Radio is placed close to a wall or in a corner the Bass sound will be more predominant.
On the other hand if placed “in the open” the sound will be thinner and more clear.
You can experiment with this for your optimal sound quality.
Tip: The sound quality on DAB stations my vary a lot. This is due to two main reasons.
1) the bitrate that is broadcasted. The higher the bitrate the better the sound quality
2) broadcaster use of audio-compression. Some broadcasters choose to use equalization and compression
on the sound. Its our experience that it makes the sound distorted and we would never recommend that.
However its not our choice and we can do nothing about it except make the listener aware of this.
For more information on which broadcasters use compression in your area contact argon.audio.com
Tip: consider to buy a set of Active speaker as Argon 7340A or Argon 7350A and you will get a outstanding
sound out of your DAB4+
DAB4+
3
Front panel controls
----
----
----
----
----
----
----
----
----
----
--
Volume control
Turn the aluminum ring mounted
around the speaker driver to increase
or decrease the volume
4
DAB4+
Other Front panel controls,
VHHQH[WSDJHIRUVSHFLĺDFWLRQV
Front panel controls
“Home” let you select between
the different Sources: DAB/FM/AUX
Power On/Off
“Favorites” or Preset stations.
Allows you to save 6 stations on
DAB and 6 stations on FM
Scroll up
Menu button/Display Information
Scroll down
Press this button once and you will change
the display information press and hold 3 sec
and you will enter the Menu
Auto Tune function by pressing
shortly you do a quick scan for station
and by pressing and holding 3 sec. you
do a full scan for stations.
for information
for information
Enter/select button
activates the selection you have
chosen by using either Scroll buttons.
DAB4+
5
Connections and back panel
------------------------------------------ Antenna for DAB and FM
------------------------------------------ Speaker for “beep” sound
---- ------ -------------------------------------------------Battery power ON/OFF
---- ----- ------------------- ------------------------- ------------- ---------------- ------ Input for iPod or other external Source
-------- Connection for Power Supply
---------------------------------------Battery compartment
6
DAB4+
Quick Start - Setting up and connecting your DAB4+
1) Power-Up your DAB4+
Connect the Power Supply to the Radio and Electric Outlet or Insert 6 x AA batteries.
The Argon DAB4+ can run on both Recharagable and Disposable Batteries.
When the DAB4+ is connected to Electric outlet WITH batteries inserted, it will automatically
use the Main power and hereby save battery life. Once the Electric outlet is disconnected it will
autmatically switch to Battery power mode.
2) Tuning DAB stations
a) Extract the antenna.
b) Choose DAB mode with the “scroll” buttons via the “home” button and press “select” on DAB.
c) Press the Auto tune button and hold for 3 sec in order to make a full scan. It will take a few minutes
d) Once the DAB stations are located they will be stored automaticall on the DAB4+.
Notice: If you move the DAB+ to another location, you will probably have to do a new Full-Scan
in order to locate the stations again.
3) Tuning FM stations
a) Extract the antenna.
b) Choose FM mode with the “scroll” buttons via the “home” button and press “select” on FM.
c) Search for stations using either the Scroll up or Scroll down button. Press once and the DAB4+
will seach 0,5 on the frequency scale. Hold for 3 sec and DAB4+ will search automatically till
next avalible station is found. To continue to next avaliable station, press and hold again for
3 sec on the scroll button.
DAB4+
7
Quick Start - Setting up and connecting your DAB4+
4) Connecting an external devise using AUX in.
You can connect an iPod or other external Source device to the AUX-IN on the
back side of the DAB4+
You can connect DAB4+ via the LINE-OUT connection on the back side,
other end. This will typically be white and red RCA plugs.
6) Using batteries and battery life time.
Argon DAB+ can run on batteries.
You need to use 6 X AA batteries. Both disposable and rechargable batteries can be used.
DAB4+ can not charge the batteries by itself, so you need to charge the batteries externally.
Playing in DAB mode battery life time is app. 8 hours with continous play.
Playing in FM mode battery life time is app. 12 hours with continous play.
When shifting from external power to battery, you will notice that the display contrast
goes down slightly. This is done to prolong the battery life time. You can choose yourself to
Important: in order to activate Battery Mode you need to turn the “Battery power ON/OFF”
button on the back panel to ”ON”.
If you switch back to use power from Electric Outlet remember to turn the
“Battery power ON/OFF” back to “OFF”. If this is not done, the DAB4+ will continue to use up
the Batteries even though its connected to the Electric Power outlet.
8
DAB4+
Using your DAB4+
DAB mode and Tuning DAB stations
1) Automatic Full scan
2) Automatic Quick scan
3) Manual scan
To do a Automatic Full scan press and hold the “autotune” button
for 3 sec.
The DAB4+ will start searching for avaliable stations. It may take a few minutes.
All found stations can be viewed pressing the “scroll” bottons
To do a Quick scan pres the
button once.
To do a Manual tune press and hold the “Menu” button
Choose “Manual Tune” and choose the frequency.
for 3 sec. The Menu screen will appear.
Viewing additional display information
This is done be pressing the “Menu” button repeatedly.
Information shown includes; broadcast quality in kbs, frequency, Broadcaster, type of broadcast.
DAB4+
9
Using your DAB4+
FM mode and Tuning FM stations
“Enter/select” button
Once in FM mode you can search for the stations, either manual or automatical
Manual tuning is done be pressing either “Scroll” up or “Scroll” down once.
You need to press for each frequency step.
Automatical tuning is done be pressing and holding the “Scroll” button for 3 sec.
The DAB4+ will then search for the next avaliable station. By pressing and holding again it will
search for the next station and so forth.
Viewing additional display information
This is done be pressing the “Menu” button repeatedly.
Information shown includes; Auto (stereo or mono), Broadcaster, type of broadcast.
Selecting audio mode (stereo or mono)
in “FM” mode press and hold the the “Enter/select” button for 3 sec. a new display will appear.
Repeat the process.
10
DAB4+
Using basic functions on your DAB4+
Storing and recalling stations
You can store 6 DAB and 6 FM stations as presets on your DAB4+
The procedure for doing so is similar for both DAB and FM mode
To store a station you are listening to, press the “Favorite” button once.
Using “Scroll” button select the preset no. you want to store the station on.
Once found press and hold the “Favorite” button for 3 sec. and the station will be stored
on the chosen preset.
A new preset overrides an existing one, when you store a new station over it.
To recall a stored station press “Favorite” button once, select the station you want to listen to
by using “Scroll” buttons and then press “Enter/ select”
Sorting stations
In DAB mode you can sort the stations in the main list either alphanumeric or by type “ensemble”.
Press and hold the “Menu” button for 3 sec. a new display appears. Choose “Station sort” by using the
“Enter/select”.
Auto “Enter/select”
The DAB4+ has a Auto Enter/select function if you dont want to press the “Enter/select” button
each time you need to change the station.
Auto Enter/select is activated by pressing and holding the “Enter/select” button for 3 sec.
To change back to Manual mode go through the proces described over again.
DAB4+
11
Using basic functions on your DAB4+
Setting the date and time
In DAB mode the date and time will be set automatically so you actually dont have to do anything.
The date and time will be updated continously no matter what DAB station you use.
However, if the DAB4+ is used in FM mode only for more prolonged time (typically more than 24 hours),
the date and time has to set manually as there is no automatic update from the broadcasters.
Setting date and time is manually is done be pressing and holding the “Menu” button for 3 sec.
A new display will appear and you should chose “Utility” by using the “Scroll” buttons.
Press “Enter/select ” and then chose “Clock setup” and press “Enter/select” again.
You are now in the setup menu for Date and Time. Change the setting by using “Scroll” buttons
Setting the Alarm
The DAB4+ has an alarm and sleep timer function.
Setting the alarm is done by done be pressing and holding the “Menu” button for 3 sec.
A new display will appear and you should chose “Utility” by using the “Scroll” buttons.
Press “Enter/select ” and then chose “Alarm setup” and press “Enter/select” again.
You are now in the Alarm setup menu .
The DAB4+ has 2 preset Alarms. Go through the setting by using the “Scroll” buttons to choose.
Notice: you can choose to either have a Buzz tone for Alarm or the radio station playing as “Alarm”.
12
DAB4+
Using basic functions on your DAB4+
Setting the Sleep Timer
To enter the Sleep Timer menu press and hold the “Menu” button for 3 sec.
Using the “Scroll” buttons select “Utility” and press “Enter/select”.
Using the “Scroll” buttons go to “Sleep setup” and press “Enter/Select”.
You are now in the Sleep Timer setup. Use the “scroll” buttons to navigate and use the
Sleep function activated will be shown in the display as “ zzz”.
To deactivate or display your settings for the Sleep Timer repeat the above steps.
Setting the Snooze function
To enter the Snooze mode press and hold the “Menu” button for 3 sec.
Using the “Scroll” buttons select “Utility” and press “Enter/select”.
Using the “Scroll” buttons go to “Snooze setup” and press “Enter/Select”.
You are now in the Snooze setup setup. Use the “scroll” buttons select Snooze time and use the
DAB4+
13
Using basic functions on your DAB4+
Reseting the DAB4+
You may want to erase the settings on your DAB4+, including presets, alarms and sleep delays.
In both DAB and FM mode press and hold “Menu” button for 3 sec.
Using the “Scroll” buttons select “Set up” and press “Enter/select”.
Using the “Scroll” buttons go to “Factory reset” and press “Enter/Select”.
The DAB4+ will now reset to facory settings and automatically start a new Qucik scan for stations.
Software version
In both DAB and FM mode press and hold “Menu” button for 3 sec.
Using the “Scroll” buttons select “Set up” and press “Enter/select”.
Using the “Scroll” buttons go to “Software version” and press “Enter/Select”.
The DAB4+ will show the software installed on the unit.
Contrast setting
The contrast/brightness of the Display can be adjusted to suit your preference.
In both DAB and FM mode press and hold “Menu” button for 3 sec.
Using the “Scroll” buttons select “Set up” and press “Enter/select”.
Using the “Scroll” buttons go to “Contrast” and press “Enter/Select”.
The display will show the contrast level on a scale from 1/8 to 8/8.
Adjust to the level you prefer by using the “Scroll” buttons.
After 5 sec. the DAB4+ will automaticall return to showing the station playing, using your new
contrast setting.
14
DAB4+
Using basic functions on your DAB4+
Using the AUX IN jack
a) connect an iPod or other external Source device to the AUX-IN on the back side of the DAB4+
b) Choose AUX mode with the “scroll” buttons via the “home” button and press “select” on AUX.
c) you will be able to regulate the volume both on the DAB4+ and on the External device while
playing through the DAB4+.
Using the LINE OUT/HEAD PHONE jack
a) connect DAB4+ via the LINE-OUT connection (showing a “headphone picture”) on the back side,
other end. This will typically be white and red RCA plugs.
c) once a mini jack plug is connected to the LINE-OUT on the DAB4+ it will stop playing from its
e) you can also connect a ear/head phone using directly, using the jack plug.
the DAB4+ itself only play Mono (due to only one speaker on the DAB4+).
DAB4+
15
Frequency Range
DAB: Band III (174-239.2 MHz) and L Band (1452-1490.624 MHz)
FM: 87.5-108 MHz/step: 50KHz
Audio Frequency Range: 70HZ-15KHZ
One 4W/2,75” full range speaker
OLED display: black background with yellow lettering
Battery function: 6xAA batteries, recharargable or disposable batteries
Input voltage: 12VDC/1,5A
Input connector: 3,5mm stereo Jack for iPod etc.
Output connector: 3,5 mm stereo Jack for Amplifier
Dimensions (W*H*D): 102mm X 160mm X 108mm
Weight: 2,4 kg
DAB4+
16
">

Hello! I am an AI chatbot specifically trained to assist you with the Argon DAB 4+ DAB radio User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key Features

DAB and FM radio
6 DAB/ 6 FM presets
Alarm, sleep timer
AUX in
Headphone output
OLED display

Frequently asked questions

How do I store DAB Stations?

To store a station you are listening to, press the “Favorite” button once. Using “Scroll” button select the preset no. you want to store the station on. Once found press and hold the “Favorite” button for 3 sec. and the station will be stored on the chosen preset. A new preset overrides an existing one, when you store a new station over it.

How do I tune FM stations manually?

Manual tuning is done by pressing either “Scroll” up or “Scroll” down once. You need to press for each frequency step.

How do I connect an external device?

You can connect an iPod or other external Source device to the AUX-IN on the back side of the DAB 4+.

How do I reset the DAB 4+?

You may want to erase the settings on your DAB 4+, including presets, alarms and sleep delays. In both DAB and FM mode press and hold “Menu” button for 3 sec. Using the “Scroll” buttons select “Set up” and press “Enter/select”. Using the “Scroll” buttons go to “Factory reset” and press “Enter/Select”. The DAB 4+ will now reset to factory settings and automatically start a new Quick scan for stations.