Barloworld Scientific | Stuart 3 | Specifications | Barloworld Scientific Stuart 3 Specifications

Barloworld Scientific Stuart 3 Specifications
Science
Equipment
5TOTALYEAR
WARRANTY
3 years parts & labor/2 additional years labor
Key to symbols
Barloworld Scientific Laboratory Group US offers a variety of
benchtop instruments to provide the necessary rocking, rolling
rotating or shaking action for your application.
The symbols shown here are used throughout this catalog to
describe the unique characteristics of each motion.
Gyratory motion
The platform moves in a three-dimensional motion.
Orbital action
The platform moves in a circular orbit.
Rocking motion
The platform rocks on a central pivot.
Rotating motion
Platform revolves at a tilted angle.
Reciprocating action
The platform moves back and forth
horizontally.
Vortex motion
The cup generates a ‘whirlpool’
vortex action.
Pivot motion
Simulates a vigorous shaking
action.
Rotative motion
Unit revolves around a fixed point.
Timer
Allows shaking times to be pre-set.
North America Edition No. 1
Copyright: 2006
Contents
2
Introduction
4
Barloworld Scientific
5
Colony Counter
7
Furnaces, Box
13
Furnaces, Tube
17
Hotplates
21
Incubators
23
Melting Point Apparatus
27
Mixers
29
Ovens
31
Rockers
35
Rollers
37
Rotators
41
Shakers
45
Stirrers & Stirrer Hotplates
55
Water Purification
60
BSLG US Overview
62
Index (by catalogue number)
63
Index (alphabetical)
1
Welcome to the 1st edition of the North American Stuart® benchtop
science equipment catalogue.
To mark the continued improvement and evolution of the range
you will find all the products now have a new modern
contemporary color scheme and distinctive logo so that you
can easily recognize Stuart® product and be totally confident
that it will provide an innovative, reliable solution and offer
exceptional value for money.
In this edition you will also find a completely new range of rockers
and shakers, new melting point apparatus, new energy efficient
infrared hotplates and updates to the Stuart® incubator range.
All Stuart® products are designed, manufactured in an
ISO9001:2000 environment in our ultra modern factory in Stone,
Staffordshire United Kingdom. Every step from new product
development to after sales service follows documented and
traceable procedures. The result is a quality focused culture
committed to total customer satisfaction.
2
FM13227
All electrical products produced by Stuart conform to the latest
safety directives including the European CE requirements. For
total compliance, all products are tested and approved by
a fully accredited external test house.
All the products featured in this catalog appear on our website at
www.dynalabcorp.com, where you can also download
additional useful information including copies of the multi
language instruction manuals, service manuals and copies of
the Certificates of Compliance to the EU safety directives.
The products featured in this catalog are available through
authorized distributors. For additional information call customer
service at 800-334-7585. Technical advice and guidance on
product selection is available from qualified scientists and
electrical engineers.
Our aim is to provide the very best bench top science
equipment as well as the highest level of care, before,
during and after the sale. All equipment is covered by a
combination 5 year warranty - 3 years parts & labor plus
an additional 2 years of labor.
3
Barloworld Scientific Limited Staffordshire, UK
(Group HQ, Sales office, Glassware and Equipment manufacturing)
Tilling Drive, Stone, Staffordshire ST15 0SA United Kingdom
Tel: +44 (0)1785 812121 Fax: +44 (0)1785 813748
e-mail: bsl@barloworld-scientific.com
www.barloworld-scientific.com
Afora S.A.- Barcelona, Spain
Calle Aribau 240, 08006 Barcelona, Spain,
Tel: +343 93-306 98 00 Fax: +343 93-306 98 23
e-mail: marketing@afora.com www.afora.com
Barloworld Scientific Limited Staffordshire, UK
Barloworld Scientific France Nemours, France
BP79, 77793 Nemours Cedex, France
Tel: +33 1 64 45 13 13 Fax: +33 1 64 45 13 00
e-mail: bibby@bibby-sterilin.fr
Barloworld Scientific Italia Milan, Italy
Via Alcide de Gasperi 56, 20070 Riozzo Di Cerro Al Lambro,
Milano, Italy
Tel: +39 02 98230679 Fax: +39 02 98230211
e-mail: marketing@barloworld-scientific.it
www.barloworld-scientific.it
Barloworld Scientific Laboratory
Group US - New York, USA
(North America Group HQ, Sales Office Dynalon, Dynalab, Stuart)
350 Commerce Drive, Rochester, New York, 14623 USA
Tel: +1 585 334 2060 Fax: +1 585 334 0241
e-mail: barlowus@dyna-labware.com www.dynalabcorp.com
(Sales Office Carbolite)
PO Box 7, 110 South Second Street Watertown, WI 53094 USA
Tel: +1 920 543 6208 Fax: +1 920 543 6209
e-mail: sales@carbolite-usa.com www.carbolite.us
4
Colony Counter
Feature packed and easy to use ...
an indispensable tool for the busy microbiologist
5
colony counter
Colony counter, SC6
‹
‹
‹
‹
‹
‹
Pressure sensitive count system
Can be used with any probe or felt tip pen
Digital readout from 0 to 999
Built-in average count facility
Audible confirmation of each count
Choice of light or dark background
Ideal for all microbiology applications, the SC6/120V/60 colony
counter provides fast and accurate counting of bacterial and mold
colonies.
The SC6/120V/60 colony counter is easy to use. Simply place the
Petri dish on the electronic pressure pad and touch the dish with a
felt tip pen to mark each colony. The touch pressure causes a count
to be registered on the digital display and an audible tone confirms
each count made (the sound can be switched on or off as desired).
Any suitable implement – a felt tip pen for example – may be used
to apply pressure to the dish. The sensitivity required to register a
count can be adjusted to suit with an easy to use dial.
SC6 with SC6/1
This unit can also be used to count multiple plates, and then
calculate the average colony count via the built-in averaging facility.
A choice of either white or black background on which to view
colonies is available. The black background aids the viewing of
difficult, translucent colonies. Two dish centering adapters are
provided to enable the use of standard Petri dishes. In addition, the
receiver dish may be easily removed for cleaning.
The SC6/120V/60 colony counter is supplied complete with one
Wolffhuegel graticule, one segmentation disc and two centering
adapters for standard Petri dishes. A choice of magnifiers is
available to aid easier counting of smaller colonies.
Technical Specification
Digital display
3 digit LED
Count
0 to 999
Dish size
50 to 100mm
Max plate number to average
99
Dimensions (w x d x h)
310 x 300 x 140mm
12.2” x 11.8” x 5.5”
Net weight
4lbs
Electrical supply
120V, 60Hz
Ordering Information
Model
Description
SC6/120V/60
Colony counter
SC6/1
1.7x magnifier
SC6/1/3
3x magnifier
SC6/2
Wolffhuegel graticule and
SC6/3
Spare dish centering adapters (pk of 2)
SC6/4
Clear protective discs (pk of 5)
SC6/5
Spare receiver dish
segmentation discs (pk of 10)
6
Furnaces, Box
The latest design...
in temperature control technology
7
furnaces, box
Box furnace, economy
1100°C
‹
‹
‹
‹
‹
‹
‹
‹
‹
‹
‹
ELF 11/6B/301
‹
‹
TYPICAL APPLICATIONS
•
•
•
•
•
Material Testing
Heat Treating
Annealing
Fusions
Hardening
•
•
•
•
•
Technical specifications
Tempering
Sintering
Melting
Curing
Drying
Heat-Up & Cool-Down Rates
1200
800
600
Model ELF 11/6B
400
ELF 11/6B
ELF 11/14B
Maximum Temperature
1100°C
1100°C
Internal Chamber Dim.
(w x d x h)
180 x 210 x 165mm 220 x 310 x 210mm
7.0 x 8.25 x 6.5”
8.75 x 12.25 x 8.25”
TC Type
K
Maximum Power kW
2.0
2.6
Furnace Voltage
208/240
208/240
Shipping Weight
62lbs
86lbs
External Dimensions
(w x d x h)
410 x 410 x 580mm 450 x 520 x 630mm
16.25 x 16.25 x 22.75” 17.75 x 20.5 x 24.75”
K
Ordering Information
1000
°C
Low cost.
Two chamber sizes available.
Excellent chamber uniformity.
Drop-down door serves as a shelf when loading and
unloading samples.
Positive break door safety switch isolates power to the
heating elements when door is opened.
Fast heat-up enhanced by low mass ceramic fiber chamber
Long-life heating elements.
Integral Model 301 PID temperature controller.
Ideal for light duty applications requiring good thermal
response.
Low outer case temperature provided through double
shell construction.
Dense ceramic hearth provides excellent resistance to wear
and spillage.
Chamber vent provides for process exhaust.
Small case size conserves bench space.
Model
Description
ELF 11/6B/301
Economy box furnace, 1100°C
ELF 11/14B/301
Economy box furnace, 1100°C
200
0
8
0
30
60
90
120
Minutes
150
180
Full line Carbolite furnace catalog available for request at www.carbolite.us
furnaces, box
Box furnace, general
purpose 1200°C & 1300°C
‹ Maximum operating temperatures of 1200°C & 1300°C.
‹ Two chamber sizes available.
‹ Two high power side heating elements provide enhanced
heat-up and chamber uniformity.
‹ Graded element winding further optimizes chamber
uniformity.
‹ Dense refractory around chamber entrance resists abrasion
and wear.
‹ Chamber vent provides for process exhaust.
‹ Vertical lift door design keeps hot door insulation away
from operator.
‹ Hard ceramic hearth provides excellent resistance to wear
and spillage.
‹ Low thermal mass insulation improves both energy efficiency
and the furnace thermal performance.
‹ Low outer case temperature provided through double
shell construction.
‹ Positive break door safety switch isolates power to the
heating elements when door is opened.
‹ Small case size conserves bench space.
‹ Serviceability is aided by furnace mechanical and
electrical design.
Technical specifications
Max. Temperature
CWF 12/13
CWF 12/23
CWF 13/13
1200°C
1200°C
1300°C
Internal Chamber, mm 200x325x200
(w x d x h)
8 x13 x 8”
245x400x235 200x325x200
9.5 x15.7 x9.2” 8 x13 x 8”
TC Type
R
R
R
Max Power kW
3.1
7.0
3.1
Furnace Voltage
208/240
208/240
208/240
Shipping Weight
125lbs
163lbs
125lbs
External Dim., mm
(w x d x h)
432x610x655
17 x24 x25.75”
505x673x705 432x610x655
20 x26.5 x27.75” 17 x24 x25.75”
CWF 12/13/3216P1
Ordering Information
Model
Description
CWF 12/13/3216P1
General purpose box furnace, 1200°C
CWF 12/23/3216P1
General purpose box furnace, 1200°C
CWF 13/13/3216P1
General purpose box furnace, 1300°C
Note: CWF models above are all stocked with 3216P1 16 segment
programmer.
Furnaces operate on single phase electric.
or by telephoning the Carbolite US sales office at 800-543-6208.
9
furnaces, box
Box furnace, high
temperature 1600°C
‹ Maximum operating temperature of 1600ºC.
‹ Heating elements located on both sides of chamber ensure
good thermal uniformity.
‹ Vertical lift door design keeps hot door insulation away
from operator.
‹ Long-life silicon carbide heating elements are resistant to
mechanical damage and chemical attack.
‹ Hard ceramic hearth provides excellent resistance to wear
and spillage.
‹ Low thermal mass insulation improves energy efficiency and
heat-up rates.
‹ Unique feature allows increase of power to the heating
elements to always achieve original heat-up performance as
elements resistance increases with age.
‹ Positive break door safety switch isolates power to the
heating elements when door is opened.
‹ Low outer case temperature provided through double
shell construction.
‹ Chamber vent provides for process exhaust.
‹ Small case size conserves bench space of bench top units.
‹ Serviceability is aided by furnace mechanical and electrical
design.
Technical specifications
RHF 16/3/3216P1
RHF 16/3
Maximum Temperature
1600°C
Internal Chamber Dim.
(w x d x h)
120 x 200 x 120mm
4.75 x 8.0 x 4.75”
TC Type
R
Max Power kW
4.5
Furnace Voltage
208/240
Shipping Weight
124lbs
External Dimensions
(w x d x h)
435 x 610 x 655mm
17.0 x 24.00 x 25.75”
Ordering Information
Model
Description
RHF 16/3/3216P1
High temperature box furnace, 1600°C
Note: RHF 16/3 is stocked with 3216P1 16 segment programmer.
Furnace operates on single phase electric.
10
Full line Carbolite furnace catalog available for request at www.carbolite.us
furnaces, box
Box furnace, high
temperature 1700°C
‹ Maximum operating temperature of 1700ºC.
‹ Heating elements located on both sides of chamber ensure
good thermal uniformity.
‹ All Carbolite standard 1700ºC furnaces are fitted with
3216P1 programmer and a separate independent
over-temperature protection controller.
‹ Long-life molybdenum disilicide heating elements are
suitable for intermittent or continuous operation.
‹ Vertical lift door design keeps hot door insulation away
from operator.
‹ Advanced high temperature, high strength hot face
insulation is combined with graded low thermal mass
insulation to improve energy efficiency and heat-up rates.
‹ Large diameter heating elements greatly reduce potential for
mechanical breakage.
‹ RS232 digital communications provided as standard.
‹ Positive break door safety switch isolates power to the
heating elements when door is opened.
‹ Low temperatures of outer case and critical components are
provided through fan cooling.
‹ Molybdenum disilicide element resistance does not change
with usage, providing no restriction on placement of a new
element in circuit with older elements.
‹ Chamber vent provides for process exhaust.
‹ Serviceability is aided by furnace mechanical and electrical
design.
HTF 17/5/3216P1
Technical specifications
HIGH TEMPERATURE APPLICATIONS
HTF 17/5
Maximum Temperature
1700°C
Internal Chamber Dim.
(w x d x h)
150 x 225 x 158mm
6.0” x 8.75” x 6.25”
TC Type
B
Max Power kW
4.19
Furnace Voltage
208/240
Shipping weight
247lbs
External Dimensions
(w x d x h)
830 x 650 x 565mm
32.5” x 25.5” x 22.25”
•
•
•
•
•
Sintering of High Temperature Materials
Glass Melting
High Temperature Testing of Ceramics
Fusion and Firing Processes
Powder Metallurgy Processes
Ordering Information
Model
Description
HTF 17/5/3216P1
High temperature box furnace, 1700°C
Note: HTF 17/5 is stocked with 3216P1 16 segment programmer.
Furnace operates on single phase electric.
or by telephoning the Carbolite US sales office at 800-543-6208.
11
furnaces, box
Box furnace, ashing and
burn-off 1100°C
‹ Maximum operating temperature of 1100ºC.
‹ Air inlets located in front of chamber and outlet chimney in
rear facilitate natural convective air flow.
‹ Chamber air flow provides oxygen to enhance ashing or
burning process, and removal of exhaust.
‹ Reduction of carbon build-up is assured by air flow through
the furnace chamber.
‹ BWF high power graded element winding provides
enhanced heat-up and improved chamber uniformity.
‹ Large diameter extended chimney provides for efficient
process exhaust.
‹ Dense refractory around chamber entrance resists abrasion
and wear.
‹ Vertical lift door design keeps hot door insulation away from
the operator.
‹ Positive break door safety switch isolates power to the
heating elements when door is opened.
‹ Low outer case temperature provided through double shell
construction.
‹ Hard ceramic hearth provides excellent resistance to wear
and spillage.
BWF 11/13/301
Technical specifications
BWF 11/13
Maximum Temperature
1100°C
Internal Chamber Dim.
(w x d x h)
200 x 325 x 200mm
8.0” x 13.0” x 8.0”
TC Type
K
Max Power kW
3.1
Furnace Voltage
208/240
Shipping weight
113lbs
External Dimensions
(w x d x h)
435 x 610 x 655mm
17.25” x 24.0” x 25.75”
Ordering Information
APPLICATIONS
Ashing for Material Analysis
Burn-off and Removal of
Material for Cleaning
SAMPLE MATERIALS
Natural Materials & Fibers
Natural Materials & Fibers
Model
Description
BWF 11/13
Burn-off box furnace, 1100°C
Note: BWF 11/13 is stocked with 301 digital controller.
Furnace operates on single phase electric.
Examples of Natural Materials & Fibers: Foods, Grains
12
Full line Carbolite furnace catalog available for request at www.carbolite.us
Furnaces, Tube
Known worldwide...
for their responsiveness and operational flexibility
or by telephoning the Carbolite US sales office at 800-543-6208.
13
furnaces, tube
Tube furnaces, single zone
1000°C & 1200°C
‹
‹
‹
‹
MTF 10/25/130/301
MTF 12/38/250/301
Maximum operating temperatures of 1000ºC & 1200ºC.
Select from four standard size wire-wound tube furnaces.
Rapid heat-up to operating temperature.
Select from multiple work tube diameters ranging from 1"
(25mm) to 2.5" (65 mm).
‹ Four heated length choices from 5" (130 mm) to 21.5".
(550 mm) provide for multiple working and uniformity
requirements.
‹ Integral ceramic work tube with external element winding
creates furnace chamber.
‹ Integral ceramic work tube is convenient and suitable for
processing in air.
‹ Easily slide a separate tube through work tube for
processing under atmosphere.
‹ Furnace incorporates low thermal mass ceramic fiber
insulation for improved response times.
‹ Furnaces are mounted horizontally on a support
base or cabinet.
‹ Thermocouple is located in a protection tube between the
chamber work tube and heating element.
‹ Safety outer mesh guard provides low temperature external
surface.
‹ Furnace controls are built into the supporting base or
cabinet, providing convenient observation and access to all
power and temperature controls.
CTF 12/65/550/301
MTF 12/38/400/301
Technical specifications
MTF 10/25/130
MTF 12/38/250
MTF 12/38/400
Maximum Temperature
1000°C
1200°C
1200°C
CTF 12/65/550
1200°C
Work Tube Diameter
25mm (1.0”)
38mm (1.5”)
38mm (1.5”)
65mm (2.5”)
Heated Length
130mm (5.0”)
250mm (10.0”)
400mm (15.75”)
550mm (21.5”)
Overall Length
150mm (6.0”)
300mm (12.0”)
450mm (17.75”)
600mm (23.5”)
TC Type
K
N
N
N
Max Power kW
0.4
1.0
1.5
2.0
Furnace Voltage
120
120
208/240
208/240
Shipping weight
22lbs
38lbs
44lbs
80lbs
External Dimensions
(w x d x h)
150 x 175 x 265mm
6.0” x 6.75” X 10.5”
370 x 375 x 430mm
14.5” X 14.75” X 17.0”
450 x 375 x 430mm
625 x 360 x 525mm
17.75” X 14.75” X 17.0” 24.5” X 14.25” X 20.75”
Ordering Information
14
Model
Description
MTF 10/25/130/301
Single Zone Wire-Wound Tube Furnace, 1000°C
MTF 12/38/250/301
Single Zone Wire-Wound Tube Furnace, 1200°C
MTF 12/38/400/301
Single Zone Wire-Wound Tube Furnace, 1200°C
CTF 12/65/550/301
Single Zone Wire-Wound Tube Furnace, 1200°C
Note: All furnaces are stocked with a
301 digital controller.
Furnaces operate on single phase electric.
Full line Carbolite furnace catalog available for request at www.carbolite.us
furnaces, tube
Tube furnace, horizontal
split-hinge 1200°C
‹ Maximum operating temperature of 1200ºC.
‹ Split-hinge design allows for convenient
process observation, enhanced cooling,
and easy fixturing of the process tube.
‹ Designed to accept process tubes up
to 4" OD (100 mm).
‹ Insulating end vestibules improve chamber
uniformity and incorporate interchangeable
tube adapters.
‹ These tube adapters allow easy conversion to
different diameter process tubes.
‹ Long-life free radiating heating element design provides
excellent radial and linear chamber uniformity.
‹ High efficiency low mass vacuum formed ceramic fiber
insulation enhances heat-up and recovery rates.
‹ Positive break furnace safety switch isolates power to the
heating elements when furnace is opened.
‹ Low outer case temperature provided through double shell
construction.
‹ Carbolite hinged tube furnaces are designed for bench
mounting, and are interconnected to a separate control
cabinet with a 6 foot cable.
HST 12/86/400/301
Technical specifications
HST 12/400
Maximum Temperature
1200°C
Maximum O.D. Tube
100mm (4”)
Heated Length
400mm (15.75”)
TC Type
N
Max Power kW
2.0
Furnace Voltage
208/240
Shipping weight
88lbs
External Dimensions
(w x d x h)
550 x 410x 350mm
21.5” x 16.25” x 13.75”
Ordering Information
Model
Description
HST 12/400
Horizontal split-hinge tube furnace, 1200°C
Note: HST 12/400 is stocked with 301 digital controller.
Furnace operates on single phase electric.
Tube adapters provided with furnace are bored to accept a 4” O.D.
process tube
or by telephoning the Carbolite US sales office at 800-543-6208.
15
furnaces, tube
Tube furnace, single zone
1500°C
STF 15/450/3216P1/OTC
‹ Maximum operating temperature of 1500ºC.
‹ Furnaces incorporate low thermal mass ceramic fiber
insulation for improved heat-up rates.
‹ Long-life free radiating silicon carbide heating elements
provide excellent radial and linear chamber uniformity.
‹ Furnace control system is fitted with 3216P1 programmable
temperature control and a separate independent overtemperature protection controller.
‹ Power may be easily increased to heating elements from the
temperature controller to compensate SiC element
resistance change (aging). This feature assures that furnace
original heat-up characteristics and maximum rated
temperature is always achieved.
‹ Furnace is mounted horizontally on an integral support base
or cabinet.
‹ Furnace controls are built into the support base, providing
convenient observation and access to all power and
temperature controls.
‹ Insulating end vestibules improve chamber uniformity.
‹ Safety outer mesh guard provides low temperature external
surface.
Technical specifications
STF 15/450
Maximum Temperature
1500°C
Maximum O.D. Tube
90mm (3.5”)
Heated Length
450mm (17.75”)
TC Type
R
Max Power kW
5.5
Furnace Voltage
208/240
Shipping weight
100lbs
External Dimensions
(w x d x h)
830 x 445 x 660mm
32.75” x 17.5” x 26.0”
Ordering Information
Model
Description
STF 15/450/3216P1/OTC
Single zone tube furnace, 1500°C
Note: STF 15/450 is stocked with 3216P1 16 segment programmable
control and over-temperature protection control.
Furnace operates on single phase electric.
Furnace end vestibules are bored to accept a 3.5” O.D. process tube.
16
Hotplates
Outstanding range of options....
the number one choice for the budget conscious laboratory
17
hotplates
Hotplates, large capacity,
CB300
Large square plate area ideal for heating one large vessel
or several smaller ones
Accommodates vessels up to 10 liter capacity
Hotplate temperature controlled by easy to use dial
Fitted with a "Hot" warning light which will flash whenever
the plate temperature is above 50°C and will operate even
when the hotplate is turned off and connected to the outlet.
Model CB300/120V/60 has a glass ceramic top which has excellent
chemical resistance and allows much higher plate temperature.
CB300/120V/60
Technical specification
CB300/120V/60
Plate material
Glass ceramic
Plate dimensions, mm (inches)
300 x 300 (11.8” x 11.8”)
Heated area, mm (inches)
200 x 200 (7.9” x 7.9”)
Heater power, W
1200
Max. plate temp. °C
450
Overall dimensions (w x d x h)
300 x 365 x 105mm
11.8” x 14.4” x 4.1”
Net weight
14lbs
Electricity supply
120V, 60Hz
Ordering Information
18
Model
Description
CB300/120V/60
Hotplate, ceramic top, analogue
hotplates
Hotplates, large capacity,
SB500
Large plate area ideal for heating multiple vessels
Accommodates up to 30 x 100ml beakers
These large rectangular shaped hotplates are ideal for heating many
smaller vessels simultaneously, e.g. in educational use where lots of
students require their samples heated at the same time.
An easy to use knob located on the front of the hotplate controls the
top plate temperature. The robust side arms make the unit very easy
SB500/230V/50
to carry.
The large surface area may stay hot for a long time after use, so for
maximum safety, a bright red hot warning light will continue to flash
until the hotplate is cool.
Model SB500/230V/50 has an aluminum / silicon alloy top plate.
This material has very good conductive properties so will give a very
even plate temperature. This means all samples, no matter where they
are placed on the hotplate, will be subjected to the same conditions
for excellent uniformity and reproducibility.
Technical specification
SB500/230V/50
Plate material
Al/Si alloy
Plate dimensions, mm (inches)
300 x 500 (11.8” x 20”)
Heated area, mm (inches)
300 x 500 (11.8” x 20”)
Heater power, W
1500
Max. plate temp. °C
300
Overall dimensions (w x d x h)
520 x 360 x 130mm
20.5” x 14.2” x 5.1”
Net weight,
27lbs
Electricity supply
230V, 50-60Hz
Ordering Information
Model
Description
SB500/230V/50
Hotplate, metal top, analogue
Please note: SB500/230V/50 is not available in 110V/60
19
hotplates
Hotplate, infrared, ceramic,
CR300
Very efficient heating saving time and energy
Chemically resistant ceramic top
"Hot" warning light for user safety
Using a very efficient infra red heater of just 900W power this
hotplate will boil 1 liter of water over 30% faster than a conventional
ceramic hotplate of 1200W. Ideal for heating large volumes of liquid.
Technical specification
CR300/230/50
CR300
Plate dimensions, mm (inches)
300 x 300 (11.8” x 11.8”)
Heated area, mm (inches)
140 diameter (5.5”)
Heater power, W
900
Overall dimensions, (w x d x h)
300 x 365 x 105mm
11.8” x 14.4” x 4.1”
Net weight
9lbs
Electricity supply
230V, 50-60Hz
Ordering Information
Model
Description
CR300/230V/50
Hotplate, infra red
Please note: CR300/230V/50 is not available in 110V/60
5 YEAR
TOTAL WARRANTY
3 years parts & labor/2 additional years labor
20
Incubators
Growth business...
high performance at budget prices
21
incubators
Incubator, with orbital
shaker, SI50
Combined incubator and shaker
Forced air circulation up to 60°C
Digital set and display of temperature
Over-temperature cut-out
Shaker accepts most sizes and mixtures of flasks
Electronic speed control with soft start
This combined incubator and orbital shaker has been designed
to provide controlled and uniform conditions for biological growth.
The compact unit has smoked acrylic side panels and door for visibility
of flasks during incubation.
Forced air circulation ensures uniform heating of the load.
The desired temperature is easily set and accurately monitored via
a digital display. For extra protection of samples, the incubator is
fitted with an adjustable safety temperature cut-out.
SI50/120V/60
The shaker has a versatile clamping system which secures most sizes
and mixtures of flasks up to 2 liter capacity. Four securing bars
covered in soft rubber can be adjusted vertically and horizontally to
suit. Typically, the platform will accommodate the following
Erlenmeyer flasks: 9 x 250 ml, or 6 x 500 ml or 4 x 1000 ml or 1 x
2000ml.
Shaker speed is variable and has electronic feed-back control
to accurately maintain set speeds. Shaking action is automatically
halted when the door is open for maximum user safety.
Technical Specification
SI50 facia
Temperature range
Ambient + 5°C to 60°C
Temperature display resolution
0.1°C
Temperature fluctuation
± 0.5°C
Speed range
20 - 250 rpm
Orbit diameter mm (inches)
16 (0.63”)
Platform size mm (inches)
310 x 310 (12.2” x 12.2”)
Internal height mm (inches)
321 (12.6”)
Maximum load, lbs
44
Overall dimensions (w x d x h)
450 x 436 x 606mm
17.7” x 17.2” x 23.9”)
Net weight
62lbs
Electrical supply
120V, 60Hz
Ordering Information
22
Cat No.
Description
SI50/120V/60
Incubator, orbital shaker
RSI50
Spare securing bars covered in soft rubber
Melting Point
Apparatus
Pure simplicity...
an unbeatable specification for reliability
23
melting point apparatus
Melting point apparatus,
advanced, SMP3
Maximum temperature 360ºC
Programmable heating rates
Melt temperature memory
Automatic cooling and user friendly display
Supplied with calibration certificate
Designed for fast and accurate measurement of melting points.
The heating block accommodates up to three samples and
incorporates a platinum resistance sensor for responsive temperature
control.
A membrane key pad allows easy setting of the desired start
temperature and heating ramp rates (fully adjustable from 0.5ºC
to 10ºC per minute). in 0.1ºC increments.
The user friendly backlit alphanumeric LCD display advises both the
temperature and the specific stage of operation. Language is
switchable between English, French, German, Italian and Spanish.
Clear observation of the samples and melt process is aided by a
powerful magnifying lens and high intensity illumination.
SMP3/120V/60
When measurements of melt are being made, the temperatures may
be stored in the instrument’s memory by pressing the storage buttons.
The values can then be recalled at a convenient time.
Once the heating cycle is completed, an integral air pump quickly
cools the heating block so that the next series of tests can be
commenced promptly.
Supplied complete with calibration certificate showing individual serial
number for traceability.
Technical Specification
Temperature ºC
SMP3/120V/60 facia
No of samples
3
Temperature range
Ambient to 360ºC
Temperature resolution
0.1ºC
Temperature accuracy
±0.5ºC at 20ºC, ±1.5ºC at 360ºC
Display
LCD
Sensor
Platinum resistance PT100
Ramp rates
0.5ºC - 10ºC per min in 0.1ºC
increments
Temperature memories
8 per tube
Dimensions (w x d x h)
180 x 260 x 300mm
Net weight
7lbs
Electrical supply
120V, 60Hz
7.1” x 10.2” x 11.8”
Ordering Information
Model
Description
SMP3/120V/60
Melting point apparatus, complete with pack of
100 melting point tubes, closed at both ends
SMP2/1
Glass melting point tubes, closed at both ends,
pack of 100
Time
24
melting point apparatus
Melting point apparatus,
digital, SMP10
Digital selection & display of temperature
High accuracy
Easy to operate with plateau facility
Ideal for educational use
Supplied with calibration certificate & 100 capillary tubes
The SMP10/120V/60 has been designed with safety and ease of
operation in mind making it ideal for use in education. The
temperature is selected, measured and displayed digitally making it
accurate and negating the need for a thermometer.
Two samples can be tested simultaneously. They are viewed via a
magnifying lens with clear observation aided by built in illumination.
Extendible back feet allow the unit to be operated at the optimum
viewing angle. Full access to the block aids cleaning.
The simple to follow instructions are printed on supplied clear labels
in most European languages for ease of use. To operate simply select
a plateau temperature via the three digit display and press ‘start’. The
unit quickly heats up and remains at the selected plateau
temperature until the user is ready to start the test. Insert the sample
tubes and press ‘start’. The unit then heats slowly so that the melt
can be observed. When the sample is seen to melt, note the
temperature on the display. Press ‘stop’ to end heating and cool the
block.
SMP10/120V/60
Supplied complete with calibration certificate showing individual
serial number for traceability.
Technical Specification
Number of samples
2
Temperature range
Ambient to 300°C
Temperature accuracy
± 1.0°C at 20°C
± 2.5°C at 300°C
Display
Three digit LED
Display resolution
1ºC
Sensor
Platinum resistance PT100
Ramp rates
20°C per minute to plateau
2°C per minute to melt
Dimensions (w x d x h)
160 x 220 x 170mm
6.3” x 8.6” x 6.7”
Net weight
4lbs
Electrical supply
120V, 60Hz
Ordering Information
Cat No.
Description
SMP10/120V/60 Melting point apparatus, complete with pack of
100 melting point tubes, closed at one end.
SMP10/1
SMP10/120V/60 facia
Glass melting point tubes, closed at one end,
pack of 100.
25
melting point apparatus
Melting point apparatus,
analogue, SMP11
Easy to operate - ideal for educational use
Supplied with safe spirit filled thermometer
Economical price
The SMP11/120V/60 measures the melting point of chemicals from
ambient to 250°C. Samples need to be placed in a sealed end
capillary tube and located in the heating block. Up to three tubes can
be tested at one time. The heating rate can be adjusted manually
between 200C/min, for rapid heating and 10C/min, to obtain an
accurate melting point range.
SMP11/120V/60
Safer, easy to use
“NO MERCURY thermometer”
The sample and melt process can be viewed via the magnifying lens,
which is illuminated by bright LED’s. Record the melt temperatures
from the thermometer, positioned horizontal to the samples to allow
simultaneous viewing. The thermometer is filled with low toxic spirit
making it completely safe in the event of a breakage. The lens can be
detached for cleaning and simple to follow instructions are printed
directly onto the unit, making it very easy for students to use.
Technical Specification
No. of samples
3
Maximum temperature
Ambient to 2500C
Heating rate
1 to 200C/min
Dimensions (w x d x h)
370 x 140 x 110 mm
14.6” x 5.5” x 4.3”
Net weight
4lbs
Electrical supply
120V, 60Hz
Ordering Information
Model
Description
SMP11/120V/60s Melting point Apparatus, complete with
thermometer and pack of 100 melting point
tubes (open both ends)
SMP11/1
Spare thermometer, spirit filled, 0°C to 250°C
SMP1/2
Cooling plug (brass) for rapidly reducing heating
block temperature after use
Melting point tubes
Made from soda glass, these tubes are easy to seal in a Bunsen flame
and break into two. Supplied in robust tube holder, pack of 100
tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner
diameter = 1.3mm and wall thickness = 0.3mm.
Ordering information
26
Cat. No.
Tube type
SMP1/4
Open both ends
SMP2/1
Sealed both ends
SMP10/1
Sealed at one end
Mixers
Good vibrations....
the stylish and affordable option for fast and thorough mixing
27
mixers
Mixer, vortex, variable
speed, SA8
Variable speed control between 200 and 2500 rpm
Intermittent or continuous mode
Stable low profile body
Robust die-cast construction
Mixing speed can be selected from 200rpm for very gentle mixing to
2500rpm for vigorous agitation. Choose between ‘touch’ mode or
continuous operation simply by pressing a button on the facia.
Robust die-cast body avoids unnecessary movement during use. The
ergonomic low profile design makes everyday vortexing comfortable
for the user.
Integral retort rod fixing allows vessels to be secured above the vortex
action for long-term mixing.
SA8/120V/60
The SA8/120V/60 can mix a variety of other vessels when used in
conjunction with the SA8/1 accessory pack detailed below.
Technical Specification
Speed
200 to 2500rpm
Orbit diameter
4.2mm
Touch mode
Yes
Continuous mode
Yes
Dimensions (w x d x h)
135 x 215 x 78mm
Net weight
Electrical supply
7lbs
120V / 60Hz
5.3” x 8.5” x 3.0”
Ordering Information
Model
Description
SA8/120V/60
Vortex mixer, variable speed
SR2
Retort rod, 300mm x 12.5mm diameter
Accessory pack
For use with SA8/120V/60 above, pack contains:
1 x plastic cradle for standard microtitre plate
1 x circular foam insert for beakers and flasks (up to 500ml capacity)
1 x rectangular foam insert
(holds 8 x 0.2ml, 8 x 0.5ml and 16 x 1.5ml microcentrifuge tubes)
1 x solid rectangular foam insert (blank for custom holes)
Ordering Information
SA8 with cradle
28
Model
Description
SA8/1
Accessory pack (for use with SA8/120V/60 only)
Ovens
“Making heat do more”...
time tested, quality proven heat processing equipment
29
ovens, laboratory
Full line Carbolite furnace and oven catalog is available
for request at www.carbolite.us or by telephoning the
Carbolite US sales office at 800-543-6208.
Oven, laboratory 300°C
Four oven chamber sizes to choose from.
Mechanical convection designs.
300ºC (572ºF) maximum operating temperature.
Temperature stability of ±1ºC.
Chamber air circulation provides excellent temperature
uniformity.
Polished stainless steel inner chamber is easy to clean and
resistant to corrosion.
Each oven is provided with two non-tilt nickel plated
shelves with multi-position settings for convenient loading
and unloading.
Long-life mineral insulated metal sheathed heating
elements.
Fast heat-up and recovery rates.
Digital temperature controller will display either setpoint or
process temperatures.
Adjustable from control panel, chamber ventilation and
exhaust vent is provided in rear wall.
Side mounted control panel avoids damage from accidental
spillage.
Efficient fibrous insulation ensures cool outer case
temperatures.
PF 30/300
Side hinged door provides access to full width of
chamber when open
Lever action of flush fitting door latch ensures gentle
closure and provides a handle when unlatched
Long-life mechanical design is also aesthetically
attractive in today's modern laboratory
Technical specifications
PF 30
PF 60
PF 120
PF 200
Maximum Temperature
300°C
300°C
300°C
300°C
Internal Chamber Dim.
292 x 320 x 300mm
392 x 420 x 400mm
492 x 520 x 500mm
592 x 520 x 750mm
(w x d x h)
11.5” x 12.5” x 11.75”
23.25” x 20.5” x 29.5”
15.25” x 16.5” x 15.75”
19.25” x 20.5” x 19.5”
Holding Power at Max Temp .35kW
.60kW
.80kW
1.25kW
Temp Uniformity at Max Temp +/- 1.0
+/- 1.0
+/- 1.0
+/- 1.0
Temp Stability Control °C
+/- 1.0
+/- 1.0
+/- 1.0
+/- 1.0
Heat-Up Time minutes
4.5 to 100°C
4.5 to 100°C
4.5 to 100°C
5.5 to 100°C
12 to 200°C
12 to 200°C
12 to 200°C
14 to 200°C
25 to 300°C
25 to 300°C
25 to 300°C
30 to 300°C
Recovery Time minutes
1 at 100°C
1 at 100°C
1 at 100°C
1.5 at 100°C
(Door open 60 sec)
2.5 at 200°C
2.5 at 200°C
2.5 at 200°C
3 at 200°C
4 at 300°C
4 at 300°C
4 at 300°C
5 at 300°C
Max Power kW
1.0
1.5
2.0
2.7
Oven Voltage
120
120
208/240
208/240
Shipping weight
82lbs
128lbs
175lbs
227lbs
External Dimensions
(w x d x h)
665 x 520 x 470mm
26.25” x 20.5” x 18.5”
765 x 620 x 570mm
30.0” x 24.5” x 22.5”
865 x 720 x 670mm
34.0” x 28.5” x 26.5”
965 x 720 x 920mm
38.0” x 28.5” x 36.25”
Ordering Information
Note: All ovens are stocked with a Model 300 digital
temperature controller.
Ovens operate on single phase electric.
30
Model
Description
PF 30/300
Laboratory Oven, 300°C
PF 60/300
Laboratory Oven, 300°C
PF 120/300
Laboratory Oven, 300°C
PF 200/300
Laboratory Oven, 300°C
Rockers
Maximum control, minimum fuss...
rock solid performers at affordable prices
31
rockers
Rockers, mini,
SSM3 & SSM4
Small space saving design - ideal for personal use
Gentle rocking action
Choice of two models:
- 3D gyratory action SSM3/120V/60
- See-saw wave action SSM4/120V/60
Digital speed control and built-in timer
Optional tier system available to increase capacity
These compact rockers are ideal where gentle mixing is required,
either on the bench or in incubators. Choice of two models:
Model SSM3/120V/60 provides a 3D gyratory motion, ideal for low
foaming agitation, DNA extractions, staining and de-staining
procedures etc. The angle of tilt can be moved to any position by
hand to optimize mixing of vessels.
Model SSM4/120V/60 has a see-saw rocking action that creates a
wave motion within vessels such as culture flasks, Petri dishes etc.
SSM3/120V/60 & SSM3/1
Digital selection of both speed and time facilitates accurate and
reproducible conditions. Both parameters are controlled via an easy to
use encoder control knob and displayed on the bright LED display.
Both models are supplied with a non-slip mat which holds flat based
vessels securely in place during mixing. An accessory tier system can
be fitted in seconds, without the need for tools, tripling the available
space for samples. Each tier is securely held in place by magnets.
Technical Specification
Rocking action
SSM3/120V/60
SSM4/120V/60
3D gyratory
See-saw wave
Platform dimensions (w x l) 235 x 235mm
235 x 235mm
9.25” x 9.25”
9.25” x 9.25”
5 to 70rpm
5 to 70rpm
Speed range
Angle of tilt
3 to 12°
7°
Angle adjustable
Yes by hand
No
Maximum load, lbs
6.6
6.6
Overall dimensions, mm
(w x d x h)
240 x 300 x 165
9.5 x 11.8 x 6.5”
240 x 300 x 150
9.5 x 11.8 x 5.9”
Operational temp. range
+4 to +40°C
+4 to +40°C
Maximum permissible
humidity
80%
80%
Net weight
11lbs
11lbs
Electrical supply
120V, 60Hz
120V, 60Hz
Ordering Information
SSM4/120V/60
Model
Description
SSM3/120V/60
Rocker, gyratory, mini
SSM4/120V/60
Rocker, see-saw, mini
SSM3/1
Tier system (2 platforms plus 8 bar)
(fits both models)
32
rockers
Rockers, lab scale,
SSL3
‹
‹
‹
‹
Large platform rockers – ideal for multiple users
Gentle rocking action
Digital speed control and built-in timer
Optional tier system available to increase capacity
These rockers have large platforms able to accommodate a number
of samples, ideal for a busy lab. They are very quiet in operation
and designed to run continuously.
Model SSL3/120V/60 provides a 3D gyratory motion, ideal for low
foaming agitation, DNA extractions, staining and de-staining
procedures etc. The angle of tilt can be moved to any position by
hand to optimize mixing of vessels.
SSL3/120V/60
Rockers are often used in conjunction with incubators and
environmental chambers. Units can be used in temperatures up to
40°C and humidity up to 80% and are supplied with a non-slip
mat. They have digital selection of both speed and time making
operation very easy. An accessory tier system can be fitted in
seconds, without the need for tools, tripling the available space for
samples. Each tier is securely held in place by magnets.
Technical Specification
SSL3/120V/60
Rocking action
3D gyratory
Platform dimensions (w x l) 355 x 355mm
14” x 14”
Speed range
5 to 70 rpm
Angle of tilt
3 to 12°
Angle adjustable
Yes by hand
Maximum load
22lbs
Overall dimensions,
(w x d x h)
360 x 420 x 170mm
14.2” x 16.5”x 6.7”
Operational temp. range
+4 to +40°C
Maximum permissible
humidity
80%
Net weight
22lbs
Electrical supply
120V, 60Hz
Ordering Information
Model
Description
SSL3/120V/60
Rocker, gyratory, lab scale
SSL3/1
Tier system (2 platforms plus 8 bars)
SSL4/120V/60 (not available)
shown with SSL3/1
33
rockers
Key to symbols
Barloworld Scientific Laboratory Group US offers a variety of
benchtop instruments to provide the necessary rocking, rolling
rotating or shaking action for your application.
The symbols shown here are used throughout this catalog to
describe the unique characteristics of each motion.
Gyratory motion
The platform moves in a three-dimensional motion.
Orbital action
The platform moves in a circular orbit.
Rocking motion
The platform rocks on a central pivot.
Rotating motion
Platform revolves at a tilted angle.
Reciprocating action
The platform moves back and forth
horizontally.
Vortex motion
The cup generates a ‘whirlpool’
vortex action.
Pivot motion
Simulates a vigorous shaking
action.
Rotative motion
Unit revolves around a fixed point.
Timer
Allows shaking times to be pre-set.
34
Rollers
Rock and roll...
complete mixing for a variety of vessels, dishes and plates
35
rollers
Rollers, SRT1 & SRT2
‹
‹
‹
‹
‹
Rocking and rolling action for complete mixing
Ideal for mixing blood samples
Removable rollers to accommodate large bottles
Designed for continuous operation
Choice of two sizes, 5 rollers or 10 rollers
These two roller mixers provide a gentle, but highly efficient,
rocking and rolling action.
The rollers rotate at 33 rpm and rise and fall 16mm.
Recommended for mixing blood samples, viscous substances and
liquid-solid suspensions where minimum aeration is required. Units
can be used in incubators up to 600C and humidity up to 80%, or in
cold rooms down to 40C.
SRT1/120V/60
Both roller mixers are robustly constructed and designed for easy
cleaning, having plastic rollers and a stainless steel drip tray to
collect accidental spillages.
Most sizes of tubes, Bijoux, Universals and bottles can be
accommodated. For large capacity bottles (up to 135mm diameter),
one or more of the rollers are easily removed to give improved grip.
Similarly, it is possible to quickly convert the units to provide a ‘roll
only’ action and function as a simple bottle roller.
Technical Specification
SRT1/120V/60
SRT2/120V/60
No. of rollers
5
10
Speed
33 rpm
33 rpm
Amplitude
16mm
16mm
Max. load
22lbs
22lbs
Roller size
(length x diameter)
Overall dimensions
(w x d x h)
Net weight
340 x 30mm
340 x 30mm
13.4” x 1.2”
13.4” x 1.2”
500 x 200 x 90mm 500 x 380 x 90mm
19.7 x 7.9 x 3.5” 19.7 x 15.0 x 3.5”
11lbs
16lbs
Electrical Supply
120V, 60Hz
Ordering Information
SRT2/120V/60
36
Model
Description
SRT1/120V/60
Roller mixer, 5 rollers
SRT2/120V/60
Roller mixer, 10 rollers
120V, 60Hz
Rotators
Good turns...
simple and efficient sample rotation in almost any type of vessel
37
rotators
Rotator, fixed speed,
SB2
‹ Fully adjustable mixing angle
‹ Constant speed of 20 rpm
‹ Choice of tube holders to hold a number of different
sized tubes
‹ Simple on/off control switch
‹ Spillage tray
The SB2/120V/60 gives gentle but effective mixing, ideal for keeping
biological samples in suspension e.g. blood. The rotator can be used
in incubators up to 60ºC and in cold rooms down to 4ºC.
The rotator has a constant speed of 20 rpm and the angle of rotation
is fully adjustable, from horizontal for minimal mixing to vertical for
full end-over-end mixing.
An integral tray catches any spillage from the rotating tubes. A choice
of six tubes holders are available to fulfill most applications.
Holder must be ordered separately (see below).
Technical Specification
Speed range
Dimensions (w x d x h)
Fixed – 20 rpm
200 x 270 x 230mm
7.9” x 10.6” x 9.0”
SB2/120V/60 & SB3/2
Net weight
7lbs
Electrical supply
120V, 60Hz
Ordering Information
SB3/2
SB3/4
Model
Description
SB2/120V/60
Rotator, fixed speed
Tube holders
SB3/3
‹ Choice of six types
‹ Quick and easy loading and removal of tubes
‹ End-over-end or rolling action
Ordering Information
Model
Description
Tube
diameter
Max. no.
of tubes
End-over-end action
SB3/1
Micro tube holder
10 to 11.5 mm
SB3/2
Test/blood tube holder
9 to 20mm
40
20
SB3/3
50ml centrifuge tube holder
25 to 35 mm
12
Rolling action
SB3/1
38
SB3/4
Culture tube holder
12mm
63
SB3/5
Culture tube holder
16mm
63
SB3/6
Culture tube holder
26mm
30
rotators
Rotator, variable
speed, timer, SB3
‹
‹
‹
‹
Fully adjustable mixing angle
Variable speed
Digital timer
Choice of tube holders to hold a number of
different sized tubes
‹ Spillage tray
The SB3/120V/60 is ideal for aerating cultures, keeping biological
samples in suspension and for general mixing applications.
The rotator can be used in incubators up to 60ºC and in cold rooms
down to 4ºC.
The rotator has a variable speed of 2 to 40 rpm for gentle rolling or
vigorous mixing of samples and the angle of rotation is fully
adjustable, from horizontal for minimal mixing to vertical for full endover-end mixing.
A digital timer and speed display allow procedures to be accurately
repeated for optimal results.
A tray catches any spillage from the rotating tubes.
A choice of six tubes holders are available to fulfill most applications.
Holder must be ordered separately (see page 38).
SB3/120V/60 and SB3/4
Technical Specification
Speed range
2 to 40rpm
Speed control
Digital
Timer
1 to 999 minutes
Net weight
7lbs
Dimensions (w x d x h)
200 x 270 x 230 mm
7.9” x 10.6” x 9.0”
Electrical supply
120V, 60Hz
Ordering Information
Model
Description
SB3/120V/60
Rotator, variable speed, timer
SB3/120V/60 facia
39
5 YEAR
TOTAL WARRANTY
3 years parts & labor/2 additional years labor
Barloworld Scientific Laboratory Group US is so confident in the
superior quality of our Stuart® line of science equipment that we
are willing to offer as standard a 5 year warranty (3 years parts &
labor and 2 additional years labor).
Barloworld Scientific's ultra-modern manufacturing facility at Stone
houses a research and development facility committed to constant
product improvements and innovation.
We make one of the most comprehensive ranges of benchtop
equipment available, including water purification equipment and
ceramic top hotplates and stirrers.
The Merit® water still and the SMP10 Melting Point Apparatus are
just two of the well established brands which maintain a deserved
reputation as market leaders.
The Stuart® range comprises over 100 products including block
heaters, blood tube rotators, colony counters, hotplates,
hybridization ovens, rockers, shakers, stirrers and water baths.
Contact our customer service department at 800 334 7585 for
further information.
40
Shakers
Movers and shakers...
an action for every type of application
41
shakers
Shaker, microtitre,
mini, SSM5
‹ High speed vibrational mixing action ideal for microtitre plates
‹ Digital selection of mixing speed
‹ Built-in digital timer or continuous operation
‹ Optional tube holders available for mixing
microcentrifuge tubes
Designed for use with microtitre plates and microcentrifuge tubes.
The aluminum tray is fitted with a specially designed mat that securely
holds in place up to four wellplates. High speed combined with a tiny
orbit creates the vibrational shaking action required for mixing the
very small volumes contained in the wells or in microcentrifuge tubes.
SSM5/120V/60
For samples that need to be mixed under controlled temperature /
humidity conditions, the SSM5 footprint is ideal for placement inside
an incubator including a CO2 incubator.
Speed is variable from 250 to 1,200 rpm and is easily set via the
digital display in 50 rpm increments. Shaking times can be set from
1 to 999 minutes on the built in digital timer. The unit can also be set
for continuous operation.
Tube holders are available as optional accessories. They fit securely
onto the platform turning the unit into an effective microtube mixer.
Technical Specification
Platform dimensions (w x l)
220 x 220mm
Number of plate positions
4
Speed range
250 to 1200 rpm
Orbit diameter
1.5mm
Maximum load
2.2 lbs
Operational temperature range
+4 to +40°C
Maximum permissible humidity
80%
Overall dimensions (w x d x h)
240 x 300 x 160mm
9.5” x 11.8” x 6.3”
SSM5/120V/60 with SSM5/1
42
Net weight
11lbs
Electrical supply
120V, 60Hz
Ordering Information
Model
Description
SSM5/120V/60
Shaker, microtitre, mini
SSM5/1
Tube holder for 1.5ml tubes
SSM5/2
Tube holder for 0.5ml tubes
shakers
Shaker, orbital,
mini SSM1
‹ Smooth orbital shaking action
‹ Orbit of 16mm is ideal for larger samples,
for example multi well plates
‹ Built-in digital timer
‹ Variable speed control to 300 rpm
‹ Supplied with non-slip mat for multi-well plates etc.
‹ Optional accessory cradle system for flasks and bottles
The compact SSM1/120V/60 provides a smooth uniform circular
motion with an orbit of 16mm. It is supplied with a non-slip mat that
can hold up to four multi-well plates or diagnostic cards. The shaking
action is ideal for samples of 0.5 to 5ml held in multi well plates,
dishes and Petri dishes. The shaker can be used in incubators and
environmental chambers (up to 40°C and 80% humidity).
SSM1/120V/60
Alternatively, an accessory cradle system is available that can
accommodate a variety of vessels including flasks, bottles or beakers
via four rubber securing bars. It turns the SSM1/120V/60 into a very
effective mini platform shaker. It will hold up to:
4 x 250ml or 2 x 500ml or 1 x 1000ml Erlenmeyer 8 flasks or bottles.
These larger vessels are held between the rubber bars. The flexible
cradle system has the benefit that different combinations of vessels
can be used offering maximum versatility.
Speed is variable from 30 to 300 rpm. Once set on the digital display,
the shaking speed is effectively maintained even over long periods of
time. Shaking times can be set to run for 1 to 999 minutes on the
built-in digital timer, or the unit can be set for continuous operation.
Technical Specification
Platform dimensions (w x l)
220 x 220mm
8.7” x 8.7”
Speed range
30 to 300 rpm
Orbit diameter
16mm
Maximum load
6.6 lbs
Operational temperature range
+4 to +40°C
Maximum permissible humidity
80%
Overall dimensions (w x d x h)
240 x 300 x 140mm
8.7” x 11.8” x 5.5”
Net weight
11lbs
Electrical supply
120V, 60Hz
SSM1/120V/60 with SSM1/1
Ordering Information
Model
Description
SSM1/120V/60
Shaker, orbital, mini
SSM1/1
Accessory cradle with 4 securing bars
SSM1/2
Large platform (holds up 8 plates)
SSM1/3
Clear Acrylic® lid
43
shakers
Shaker, orbital, lab scale,
SSL1
‹ Orbital shaking action – ideal for aeration
applications
‹ Digital speed selection to 300 rpm with
soft start
‹ Built-in digital timer
‹ Reliable quiet drive mechanism
‹ Fully adjustable cradle system
This lab scale platform shaker has a powerful yet quiet shaking
mechanism that has been designed for problem free continuous use.
Model SSL1/120V/60 provides a smooth orbital shaking action with
an orbit of 16mm and speed range of 30 to 300 rpm, ideal for most
culturing / aeration applications. It can be used in environmental
chambers and CO2 incubators.
The cradle type platform has six rubber cushioned horizontal securing
bars with quick release handles. They can be easily adjusted both
vertically and horizontally to hold most sizes and types of vessel,
including flasks, bottles and beakers. For example, they will
accommodate the following Erlenmeyer flasks or bottles:
12 x 250ml or 8 x 500ml or 6 x 1000ml or 2 x 2000ml.
SSL1/120V/60
The main advantage of this cradle system is that it can accommodate
different sizes of vessel, a common requirement where shakers are
used by different people in the laboratory.
Speed is fully variable and is set digitally for consistency. The speed is
microprocessor controlled and accurately maintained even over long
runs. A digital built-in timer allows shaking times from 1 to 999
minutes to be set. After the timer has counted down, the shaker
stops and sounds an alert. Alternatively the unit can be set for
continuous operation.
SSL1/1
Technical Specification
SSL1
Shaking action
Orbital
Platform dimensions (w x l)
335 x 335mm
Speed range
30 to 300 rpm
Orbit / amplitude
16mm
Maximum load
22 lbs
Model
Overall dimensions (w x d x h)
360 x 420 x 270mm
SSL1/120V/60
Shaker, orbital, lab scale
14.2” x 16.5” x 10.6”
SSL1/1
Accessory platform 510 x 510mm (20” x 20”)
13.2” x 13.2”
44
A larger platform is available as an optional accessory (catalog number
SSL1/1). Designed to increase the capacity of the SSL1/120V/60, the
platform is 510 x 510mm (20” x 20”) with six securing bars. It will
accommodate the following Erlenmeyer flasks or bottles:
30 x 250ml or 16 x 500ml or 9 x 1000ml or 4 x 2000ml.
Operational temperature range
+4 to +40°C
Maximum permissible humidity
80%
Net weight
25lbs
Electrical supply
120V, 60Hz
When this platform is fitted, the maximum permissible speed is
150 rpm.
Ordering Information
Description
with six rubber securing bars.
Stirrers
& Stirrer Hotplates
from compact to large capacity ...
one of the widest choices available
45
stirrers & stirrer hotplates
Stirrers, magnetic,
CB161
‹ Chemically resistant ceramic top
‹ Spillproof design which helps deflect spills away from the
controls and the user
‹ Powerful magnets for strong stirring action
Powerful magnets and motor give stirring speed up to 1500rpm and
volumes up to 15 liters *.
Model CB161/120V/60 has a glass ceramic top which has excellent
chemical resistance. The chemical properties make the surface very
easy to keep clean. The white surface ensures good visibility of color
changes, during titration for example.
Technical Specification
Model
CB161/120V/60
Plate material
Glass ceramic
Plate dimensions
160 x 160mm
6.3” x 6.3”
Stirrer speed, rpm
100 - 1500
Max. stirring capacity, liters* 15
CB161/120V/60
Overall dimensions
(w x d x h)
190 x 300 x 110mm
7.5” x 11.8” x 4.3”
Net weight
7lbs
Electrical supply
120V, 60Hz
Ordering Information
Cat. No
Description
CB161/120V/60 Stirrer, ceramic plate
* Based on water contained in a 20 liter flat bottom boiling flask.
5
YEAR
TOTAL WARRANTY
3 years parts & labor/2 additional years labor
46
stirrers & stirrer hotplates
Stirrer, magnetic, heavy
duty, SB301
‹ Robust construction with stainless steel top
‹ Powerful magnets for strong magnetic coupling
‹ Stirs up to 30 liters
Large and powerful stirrer for use with vessels up to 30 liter capacity.
Powerful magnetic drive with electronic feed-back speed control
which accurately maintains the set speed. Supplied complete with 1 x
100mm PTFE coated stir bar.
Technical specification
Plate material
Stainless steel
Plate dimensions
300 x 300mm
Speed range, rpm
100 - 600
Stirring capacity, liters
30
Overall dimensions, (w x d x h)
300 x 365 x 105mm
11.8” x 11.8”
11.8” x 14.4” x 4.1”
Net weight
11lbs
Electricity supply
120V, 60Hz
Ordering Information
Cat. No
Description
SB301/120V/60
Stirrer, magnetic, heavy duty
SB301/120V/60
Dynalon magnetic stir bars
‹ Our stir bars feature…
ALNICO V magnetic cores which are one of the most
powerful permanent magnet alloys available.
‹ Stir bars should not…
be stored in a random mass or dropped on a hard surface,
especially steel.
‹ Stir bars should…
be stored in pairs to maintain magnetic strength.
‹ In general…
PTFE thickness accounts for 18% of stir bar diameter.
Kit Contains 16 Stirring Bars
(2)
(2)
(2)
(2)
5/16” x 1/2” (8 x 13mm)
5/16” x 5/8” (8 x 16mm)
3/8” x 1” (9.5 x 25mm)
3/8” x 1 1/2” (9.5 x 38mm)
(2)
(2)
(2)
(2)
3/8” x 2” (9.5 x 51mm)
3/8” x 2 1/2” (9.5 x 64mm)
2 mm x 7 mm Micro Bars
3 mm x 10 mm Micro Bars
303595
Ordering Information
Cat. No
Description
303595
Magnetic Stirring Bar Kit
47
stirrers & stirrer hotplates
Stirrers, magnetic, with
hotplate, CC162 & SC162
‹
‹
‹
‹
CC162/120V/60 with
SCT1 controller
Choice of robust aluminum or chemically resistant ceramic tops
For use with SCT1 digital temperature controller
Powerful stirrer
Advanced safety & communication features:
- Flashing ‘Hot’ warning light
- Spillproof design
- Overheat protection
- Visible indication of temperature control
The SC162 and CC162 stirrer hotplates are specifically designed for
use with the Stuart SCT1 temperature controller.
Available in a choice of either robust aluminum or chemically resistant
ceramic top, each is equipped with a range of advanced safety and
communication features. To alert the user, a ‘Hot’ warning light will
flash whenever the plate temperature is above 50°C, even when the
hotplate is turned off and connected to the mains. The cast
aluminum body is shaped for stability and helps deflect spills away
from the controls. An Independent safety circuit prevents overheating
in the event of control failure and internal electronic components are
protected against corrosion. Powerful magnets and motor give
stirring speed up to 1500rpm and volumes up to 15 liters.
The units automatically detect when the contact thermometer is
plugged in. Communication with the SCT1 temperature controller is
visible by an illuminated LED on the hotplate, providing reassurance
that the temperature of the sample is precisely controlled at all times.
Both CC162 and SC162 models can be used independently of
the SCT1 temperature controller as a general purpose stirrer
hotplate.
Model CC162 has a glass ceramic top, which has excellent
chemical and temperature resistance. The surface is easy to clean
and the thermal properties allow very high plate temperatures.
Model SC162 (shown on page 49) has a robust
aluminum/silicon alloy top plate for good heat transmission. A
700W element gives rapid heating and ensures even
temperature distribution across the whole of the plate.
Technical Specification
Model
Plate material
Plate dimensions
CC162
Glass ceramic
160 x 160mm
6.3” x 6.3”
Heated area
120 x 120mm
4.7” x 4.7”
Heater power, W
500
Max. plate temp. °C
450
Stirrer speed, rpm
100 to 1500
Max. stirring capacity, liters 15
Overall dim. (w x d x h)
190 x 300 x 110
7.5 x 11.8 x 4.3”
Net weight, lbs
7.5
Electrical supply
120V, 60Hz
SC162
aluminum/silicon alloy
160 x 160mm
6.3” x 6.3”
160 x 160mm
6.3” x 6.3”
700
325
100 to 1500
15
190 x 300 x 110mm
7.5 x 11.8 x 4.3”
7.5
120V, 60Hz
Ordering Information
Cat. No
48
Description
CC162/120V/60 Stirrer/hotplate, ceramic plate, probe socket
SC162/120V/60 Stirrer/hotplate, aluminum plate, probe socket
SR1
Retort rod, 600mm x 12mm diameter
stirrers & stirrer hotplates
Temperature Controller, SCT1
Accurate liquid temperature control
Built in retort fitting and probe holder
Detachable temperature probe
Bright, easy to read LED display
Compact and light weight
Comprehensive range of accessories
The Stuart SCT1 temperature controller is the ideal instrument for the
accurate temperature control of aqueous or oil based samples in the
laboratory. Designed for use with the Stuart metal top (SC162) or
ceramic top (CC162) stirrer hotplates, the SCT1 can be used either as a
precise controller of temperature up to a maximum of 200°C or as a
digital thermometer up to 325°C.
The SCT1 temperature controller features an in-built clamp allowing
the controller to be mounted either on a horizontal or vertical retort
rod, providing flexible positioning of the controller. In addition, the
stainless steel temperature probe, used to measure the temperature of
the sample, is detachable, allowing the main body of the SCT1
temperature controller to be positioned away from potentially
damaging fumes. The SCT1 temperature controller regulates the
hotplate to accurately control the temperature of the sample, which is
set via the large LED display. When not in use the temperature probe
can be held securely by the in-built probe holder.
A range of accessories is available to allow for a complete set up of
temperature controller, probe and stirrer hotplate in the laboratory. An
accessory probe holder clamps on to a retort rod to allow secure
positioning of the temperature probe in the sample. A PTFE probe is
also available as an accessory for those applications requiring a
chemically resistant probe.
Technical Specification
Model
Sensor type
Probe
Temperature range °C
Accuracy, °C
Resolution
Dimensions (w x d x h)
Weight, lbs
SCT1
PT100
Stainless steel
50° to 200°C
±0.5°C
1°C
90 x 75 x 123mm
3.5” x 3.0” x 4.8”
0.66 (including probe)
SC162/120V/60 with
SCT1 controller
Ordering Information
Cat. No
SCT1
SCT1/1
Description
Contact thermometer, digital
Probe holder
SCT1/2
PTFE probe
Note: the SCT1 can only be used with the SC162 and CC162.
It is not compatible with any other Stuart stirrer hotplate.
49
stirrers & stirrer hotplates
Stirrer, magnetic, portable,
SM27
Battery powered
Tough, compact and light weight
Variable speed up to 1300 rpm
Powered by long life batteries or car battery adapter this rugged little
unit can be used almost anywhere. Ideal for use inside incubators,
glove boxes or in the field. Housed in a tough, chemically resistant
ABS case and supplied complete with batteries.
Technical specification
Max speed
SM27
1300 rpm
Capacity, liters H2O
1.5
Overall dimensions
(w x d x h)
150 x 160 x 70mm
5.9” x 6.3” x 2.8”
Net weight
3lbs
Electricity supply
4 x alkaline batteries
Battery type
1.5V, size D, IEC No. LR20
Battery life
600 hours continuous use
Ordering Information
50
Model
Description
SM27
Portable magnetic stirrer complete with 4 x LR20
batteries and 25mm PTFE stir bar
SM27/3
Car battery adapter, 12V, Fitted with standard car
cigarette/cigar plug
stirrers & stirrer hotplates
Stirrers, magnetic, with
hotplate, CB162
Robust chemically resistant ceramic tops
Advanced safety features:
- Flashing ‘Hot’ warning light
- Spillproof design
- Independent safety circuit to protect against overheating
Microprocessor control for accurate temperature setting
Stylish and economical general purpose stirrer hotplates designed
with safety as well as performance in mind. The cast aluminum body
is shaped for stability and helps deflect spills away from the controls
and the user. The ‘Hot’ warning light will flash whenever the plate
temperature is above 50°C even when the hotplate is turned off and
connected to the mains. Independent safety circuit prevents
overheating in the event of control failure and internal electronic
components are protected against corrosion. Powerful magnets and
motor give stirring speed up to 1500rpm and volumes up to
15 liters*.
Model CB162 has a glass ceramic top which has excellent chemical
and temperature resistance. The surface is easy to clean and the
thermal properties allow very high plate temperatures while ensuring
the edges stay cooler, reducing the chance of accidental burns.
The white surface ensures good visibility of colour changes.
CB162
Technical Specification
Model
CB162
Plate material
Glass ceramic
Plate dimensions
160 x 160mm
6.3” x 6.3”
Heated area
120 x 120mm
4.7” x 4.7
Heater power, W
500
Max. plate temp. °C
450
Stirrer speed, rpm
100 - 1500
Maximum stirring
capacity, liters *
15
Overall dimensions
(w x d x h)
190 x 300 x 110mm
7.5” x 11.8” x 4.3”
Net weight
7.5lbs
Electrical supply
120V, 60Hz
Ordering Information
Cat. No
Description
CB162
Stirrer/hotplate, ceramic plate
* Based on water contained in a 20 liter flat bottom boiling flask.
51
stirrers & stirrer hotplates
Stirrer hotplates, digital,
CD162
Digital setting and control of both temperature and speed
Supplied complete with temperature probe for accurate control
of liquid temperature
Advanced safety features:
- Flashing "Hot" warning light
- Independent safety circuit to protect against overheating
Chemically resistant ceramic top
Sophisticated stirrer hotplates offering digital control of both
temperature and stirring speed. Comes complete with a detachable
PTFE coated probe which when immersed in a liquid sample can very
accurately control its temperature to within ±0.5°C even over a very
long period of time.
As the hotplate heats the sample to the set temperature, the
advanced microprocessor automatically measures the rate of
temperature rise to judge the capacity and nature of samples (e.g. oil
or aqueous). It then optimizes the heating rate to minimize overshoot
and time to set point. An audible alert sounds when the set
temperature has been reached.
CD162/120V/60
Both set and actual temperature of the sample are displayed
simultaneously on a bright, easy to read vacuum fluorescent display.
For maximum security, an independent safety circuit automatically sets
to 20°C above the set temperature and shuts off the heater if the
temperature exceeds this. Therefore, the hotplate is safe to leave on
continuously, even unsupervised e.g. overnight. Internal electronic
components are protected against corrosion with a special coating.
Stirring action gives much better temperature uniformity within
samples because the liquid is mixed effectively. Powerful magnets and
motor give stirring speeds up to 1300 rpm and volumes up to 15
liters*.
Stirring speed is set and displayed digitally so that exactly the same
speed can be used each time for reproducibility.
If the probe is unplugged, the temperature of the top plate can be set
on the display. This can be useful for applications where accurate
surface temperature is important such as warming microscope slides
and microarrays and specialist electronics.
52
stirrers & stirrer hotplates
Model CD162/120V/60 has a glass ceramic top plate, which is
chemically resistant and gives very fast heat up times.
With fitting for retort rod and supplied complete with PTFE coated
probe and 2 x 25mm PTFE coated stirrer bars
Technical Specification
Model
CD162/120V/60
Plate material
Glass ceramic
Plate dimensions
160 x 160mm
6.3” x 6.3”
Heated area
120 x 120mm
4.7” x 4.7”
Heater power, W
500
Display resolution °C
1
Max. plate temp. °C
450
Max. liquid temp,
with probe °C
200
Control accuracy
with probe °C
±0.5°C
Stirrer speed, rpm
200 - 1300
Max. stirring
capacity, liters *
15
Net weight
7.5lbs
Overall dimensions
190 x 300 x 110 mm
(w x d x h)
7.5” x 11.8” x 4.3”
Electrical supply
120V, 60Hz
Ordering Information
Cat. No
Description
CD162/120V/60 Digital stirrer/hotplate, ceramic plate, 500W
Accessories
CD162/1
Temperature probe, stainless steel
SR1
Retort rod, 600 x 12mm
* Based on water contained in a 20 liter flat bottom boiling flask.
53
stirrers & stirrer hotplates
Stirrer, magnetic, 3 position
with hotplate, SB162-3
Three independently controlled stirring/heating positions
Separate "Hot" warning lights for each plate
Powerful magnets for strong magnetic coupling
A space saving and economical unit with 3 independent
heating/stirring positions in a footprint only 600 x 270mm.
Easily accommodates 3 x 2 liter beakers.
Unit only requires one power point and is ideal for quality control
applications where multiple samples require simultaneous heating and
stirring, under the same conditions.
SB162-3
A "Hot" warning light for each plate will flash whenever its
temperature is above 50°C and will operate even when the hotplate
is turned off and connected to the outlet.
The top plates are a robust aluminum/ silicon alloy, providing even
plate temperature.
Powerful magnets and motor give stirring speed up to 1500rpm and
volumes up to 15 liters.*
Supplied complete with 3 x 25mm PTFE coated stir bars.
Technical specification
Plate material
Al/Si alloy
Individual plate dimensions, mm
160 x 160mm
6.3” x 6.3”
Heater power, W
3 x 700
Maximum plate temperature. °C
325
Speed range, rpm
100 - 1500
Overall dimensions (w x d x h)
600 x 270 x 110mm
23.6” x 10.6” x 4.3”
Net weight
25lbs
Electricity supply
230V, 50Hz, 2250W
Ordering Information
Model
Description
SB162-3
Stirrer, magnetic, 3 position with heating
SR3
Retort rod, 600mm plus bracket
*Based on water contained on a 20 liter glass bottom boiling flask.
Please note: SB162-3 is not available in 120V/60
54
Water
Purification
Quality distilled...
the most reliable method of purifying water
55
water purification
Distillation
Distillation is a natural process that has been used to purify liquids for
many hundreds of years. Today it remains the most common
technique for water purification in use in laboratories. From schools
to research institutes the simplicity, reliability and versatility of
distillation make it the first choice for producing pure water for
general use. It has the widest capability of any method of water
treatment and is ideal for the removal of:
Dissolved inorganic salts
Bacteria
Pyrogens
Particulate matter
Colloids
Organic material boiling at >100°C
The performance of a water still is less dependent on the quality and
temperature of the feed water than most other methods of water
treatment. It is a visible process, easy to monitor and has no hidden
resins or membranes to degrade and affect water quality.
Principles of distillation
There is a major difference between distillation and all other
techniques of water purification in that the contaminants are not
removed from the water but that the water is removed from its
contaminants.
The feed water is boiled producing pure steam with contaminants
being left behind in the boiling chamber. Steam is then condensed
back into pure water.
It is this double phase change which gives distillation its versatility and
reliability. The only contaminants which can carry through the phase
change are organic materials with a boiling point below 100°C and
dissolved gases.
How a Barloworld Scientific water still works
There are 4 basic components to any Barloworld Scientific water still:
Boiler
Condenser
Constant level device
Heater
Water is heated in the boiler to produce pure steam. This is fed into
the condenser via a long vertical tube with baffles in order to prevent
carry over of raw water droplets.
56
water purification
Water is fed through the condenser, cooling the steam to produce
distilled water and itself being warmed in the process. This warmed
water is then fed to the boiler via the constant level device which
maintains the water in the boiler at the correct level and increases
efficiency.
The vertical design of condenser is common to all Barloworld
Scientific water stills and ensures the maximum energy transfer
between cooling water and condensate. These highly efficient
condensers produce cold distilled water ready for immediate use.
Barloworld Scientific water stills
There are 2 levels of specification to choose from in the Barloworld
Distinction®
Scientific water still range:
Distinction
Economical borosilicate glass still with silica sheathed heater. Produces
4 liters/hr single distilled water. A safety device is included which
turns off the heater and prevents overflow when the collecting
reservoir is full. See page 58.
Merit
A simple glass water still with long life metal heater and twin safety
thermostats. Ideal for schools and colleges. See page 59.
Accessories
A range of accessories is available to compliment the range of water
stills including deionizer, filter and storage aspirators.
Reservoir options
A choice of aspirator bottles manufactured from polypropylene. Ideal
Merit
for storing distilled water. See page 60.
57
water purification
Water still, Distinction®,
539994
All glass construction
Two independent safety thermostats
Safety reservoir full shut off
Wall mountable
Silica sheathed heaters
All glass construction with silica sheathed heaters ensures top purity
distillate at an economical price.
Fitted with a control device to turn off the heater when the collecting
reservoir is full. Prevents overflow if the still is inadvertently left
switched on when unattended. With two independent safety
thermostats to prevent over heating in the event of an interruption to
the water supply.
539994-0000
The unique condenser design ensures that the droplets of distilled
water remain in contact with the cooling coil for the longest possible
time producing cold distilled water and pre-heating the boiler feed to
increase efficiency.
Screwthreads are incorporated on all water connections so hoses can
be fitted and removed easily and safely without risk of breakage.
Built in acid addition funnel and drain stopcock allow easy descaling
without dismantling the glassware.
The stand is pre-drilled to facilitate wall mounting.
Technical specification
Output
4 liters/hr, single distilled
pH
5.0 – 6.5
Conductivity, µScm-1
1.0 – 2.0
Conductivity and resistivity are affected by the presence
Resistivity, mOhm-cm
0.5 – 1.0
of dissolved carbon dioxide. All figures given in this
Temperature
25 - 35°C
catalogue are based on tests carried out on the still
Pyrogen content *
Pyrogen free
output at 20°C and free from carbon dioxide.
Water supply
1 liter/min
3 – 100psi (20-700kPa)
Electricity supply
220 or 240V, 50-60Hz, single phase
Power requirement
3kW
Dimensions (wxdxh)
540 x 160 x 410mm
21.2” x 6.3” x 16.1”
* care is required to produce pyrogen free water and the output
should be tested before use.
Ordering information
58
Model
Description
539994-0000
Distinction water still, 240V
539994-0001
220V Heater element 3kw
539994-0002
Replacement boiler
540014-0003
Replacement condenser
water purification
Water still, Merit, 540004
Economical price
Glass construction with long life metal heating element
Two independent safety thermostats
Wall mountable
The Merit is the ideal choice for budget conscious laboratories that
can’t afford to compromise on quality. It combines economy and high
performance with a host of other features which comparable stills
cannot match.
Built in acid addition funnel and drain stopcock allow easy descaling
without dismantling the glassware.
The unique condenser design ensures that the droplets of distilled
water remain in contact with the cooling coil for the longest possible
time producing cold distilled water and pre-heating the boiler feed to
increase efficiency.
Screwthreads are incorporated on all water connections so hoses can
be fitted and removed easily and safely without risk of breakage.
Safety features include two independent safety thermostats to
prevent over heating in the event of failure of the water supply.
540004-0000
The stand is pre-drilled to facilitate wall mounting.
Technical specification
Output
4 liters/hr, single distilled
pH
5.0 – 6.5
Conductivity, µScm-1
3.0 – 4.0
Resistivity, mOhm-cm
0.25 – 0.3
Temperature
25 - 35°C
Pyrogen content *
Pyrogen free
Water supply
1 liter/min
3 – 100psi
(20-700kPa)
Conductivity and resistivity are affected by the presence of
dissolved carbon dioxide. All figures given in this catalogue are
Electricity supply
220 or 240V, 50-60Hz, single phase
based on tests carried out on the still output at 20°C and free
Power requirement
3kW
from carbon dioxide.
Dimensions, (wxdxh), mm 500 x 150 x 450
19.7” x 5.9” x 17.7”
* care is required to produce pyrogen free water and the output
should be tested before use.
Ordering information
Model
Description
540004-0000
Distinction water still, 240V
540014-0001
220V Heater element 3kw
540014-0002
Replacement boiler
540014-0003
Replacement condenser
59
water purification
Water still accessories
The following accessories are available for use with Distinction and
Merit water stills.
Ordering information
Cat. No.
Description
505634-0001
Azlon® carboy with leakproof spigot ideal for use
as a water still reservoir. Manufactured from
polypropylene and autoclaveable at 121°C.
Cap with drill guides for distillate and air
inlets. Capacity 10 liters.
505634-0002
As above but capacity 10 liters
505634-0003
As above but capacity 20 liters
505634-0002
Plastic fabrication available
from Dynalab Corp.
Dynalab Corp's Rochester, NY custom plastic fabrication facility
manufactures many products for use in laboratories, industry and
education including fume hoods, environmental chambers and
laboratory furniture. Plastic fabricators have the capabilities to produce
custom jobs following the exact requirements of your application. A few
examples of our custom fabrication products include tanks, fittings, machine
guards, fume hoods, cabinets, chambers, gears, racks and thousands of other
industrial and laboratory plastic fabrication items. We have extensive
experience in clear acrylic fabrication a common material for custom plastic
fabrication projects (especially for Beta Radiation Protection).
Our custom plastic fabrication facilities in Rochester, NY are capable of
producing prototypes as well as high volume job runs. We would be happy to
provide you with a free quotation and any technical assistance you may
require throughout your project. E-mail our custom plastic fabrication
department for further information.
Dynalab works with virtually all types of plastics. We stock a large inventory
of sheet, rod, tubing, extrusions, fittings, plastic hardware, perforated sheet,
etc. Our capabilities include but are certainly not limited to:
•
•
•
•
•
Assembly
Bending
Bonding
CNC Lathe Turning
CNC Machining
•
•
•
•
•
Cutting
Engraving
Flame Polishing
Forming
Hot Stamping
•
•
•
•
Inserting
Threading
Ultrasonic Welding
Welding
For additional information on Dynalab Corp’s custom plastic
fabrication please visit www.dynalabcorp.com or phone 800 828 6595.
60
BSLG US Overview
Plastic lab supplies available
from Dynalon Labware
Offering science equipment, reusable and single use plastic labware
for use in education, industry and the laboratory. Dynalon Labware is
your one stop for plastic consumables and basic lab equipment with product
ranges including but not limited to the following:
•
•
•
•
•
•
•
Beakers
BETA Protection
Bottles
Carboys
Containers
Cuvettes
Cylinders
•
•
•
•
•
•
•
Desiccators
Flasks
Funnels
Liquid Handling
Melting Point
Petri Dishes
Pipettes
•
•
•
•
•
•
•
Plastic Fabrication
Safety Products
Staining Accessories
Stirrer/Hotplates
Stirring Bars
Vials
Water Stills
For additional information on Dynalon Labware please visit
www.dynalon.com or telephone 800 334 7585.
Science equipment available
from Techne
Techne Inc. offer sales, support and calibration services for a wide
range of high quality laboratory, life science, temperature calibration,
electrochemistry and spectroscopy instruments. Techne Inc. offers a wide
range of instruments including:
•
•
•
•
•
Dry Block Temperature Calibrators
Thermal Cyclers
Water Baths
Electrochemistry Meters and Probes
Temperature Sensors and Thermometers
•
•
•
•
•
Hybridization Ovens
Spectrophotometers
Flame Photometers
Dri-blocks
Fluidized Baths
For additional information on Techne please visit www.techneusa.com
or telephone 800 225 9243.
Scientific instrumentation
available from Jenway
Manufacturer of electronic thermometers and probes encompassing a
wide range of analytical products. Particular strengths are in
electrochemistry & optical spectroscopy. Jenway is a leading company
designing and manufacturing high quality scientific instrumentation. Our
extensive product range includes:
• UV/Vis Spectrophotometers
• Flame Photometers
• Life Science & Environmental Spectrophotometers • Colorimeters
• Portable and Laboratory meters for the measurement
of Dissolved Oxygen, pH, Conductivity and Specific Ions
For additional information on Jenway please visit www.techneusa.com
or telephone 800 225 9243.
61
index
Catalog
Number
Page
Number
BWF 11/13
12
Page
Number
SC6/1/3
6
SC6/2
6
CB161/120V/60
46
SC6/3
6
CB162
51
SC6/4
6
CB300/120V/60
18
SC6/5
6
CC162/120V/60
48
SCT1
49
CD162/1
53
SCT1/1
49
CD162/120V/60
52
SCT1/2
49
CR300/230V/50
20
SI50/120V/60
22
CTF 12/65/550/301
14
SM27
50
CWF 12/13/3216P1
9
SM27/3
50
CWF 12/23/3216P1
9
SMP1/4
26
CWF 13/13/3216P1
9
SMP2/1
24,26
SMP3/120V/60
24
25,26
ELF 11/6B/301
8
SMP10/1
ELF 11/14B/301
8
SMP10/120V/60
25
SR1
48,53
28
HST 12/400
15
SR2
HTF 17/5/3216P1
11
SR3
54
SRT1/120V/60
36
MTF 10/25/130/301
14
SRT2/120V/60
36
MTF 12/38/250/301
14
SSL1/1
44
MTF 12/38/400/301
14
SSL1/120V/60
44
SSL3/1
33
PF 30/300
30
SSL3/120V/60
33
PF 60/300
30
SSM1/1
43
PF 120/300
30
SSM1/2
43
PF 200/300
30
SSM1/3
43
SSM1/120V/60
43
SSM3/1
32
SSM3/120V/60
32
RHF 16/3/3216P1
62
Catalog
Number
10
SA8/1
28
SSM4/120V/60
32
SA8/120V/60
28
SSM5/1
42
SB162-3
54
SSM5/2
42
SB2/120V/60
38
SSM5/120V/60
42
SB3/1
38
STF 15/450/3216P1/OTC
16
SB3/2
38
SB3/3
38
303595
47
SB3/4
38
505634-0001
60
SB3/5
38
539994-0000
58
SB3/6
38
539994-0001
58
SB3/120V/60
39
539994-0002
58
SB301/120V/60
47
540004-0000
59
SB500/230V/50
19
540014-0001
59
SC162/120V/60
48
540014-0002
59
SC6/1
6
540014-0003
58,59
SC6/120V/60
6
Item
Page Number
A
Aspirators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
B
Battery stirrer . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Blood tube rotator . . . . . . . . . . . . . . . . . . . . . . .38
Bottle shakers . . . . . . . . . . . . . . . . . . . . . . . . . .44
C
Carboys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Capillary tubes . . . . . . . . . . . . . . . . . . . . . . . . . .24,25,26
Ceramic
- Hotplates . . . . . . . . . . . . . . . . . . . . .18
- Magnetic stirrers . . . . . . . . . . . . . . .46
- Magnetic stirrer hotplates . . . . . . . .51, 52, 53
Colony counter . . . . . . . . . . . . . . . . . . . . . . . . .6
Culture tube holders . . . . . . . . . . . . . . . . . . . . .38
D
Distinction® water still . . . . . . . . . . . . . . . . . . . .58
E
Electrical safety . . . . . . . . . . . . . . . . . . . . . . . . .64
G
Gyro-rocker® . . . . . . . . . . . . . . . . . . . . . . . . . . .32, 33
H
Hotplates
- Aluminum top . . . . . . . . . . . . . . . . .19
- Ceramic top . . . . . . . . . . . . . . . . . . .18
- Infrared . . . . . . . . . . . . . . . . . . . . . .20
- Large capacity . . . . . . . . . . . . . . . . .19
I
Incubators
- Orbital shaker . . . . . . . . . . . . . . . . .22
Infrared
- Hotplate . . . . . . . . . . . . . . . . . . . . . .20
M
Magnetic stirrers
- Battery operated . . . . . . . . . . . . . . .50
- Ceramic top . . . . . . . . . . . . . . . . . . .46
- Heavy duty . . . . . . . . . . . . . . . . . . . .47
- Hotplate . . . . . . . . . . . . . . . . . . . . . .48, 51 to 54
Magnetic stirring bars . . . . . . . . . . . . . . . . . . . .47
index
Item
Page Number
Melting point apparatus
- Advanced . . . . . . . . . . . . . . . . . . . . .24
- Analogue . . . . . . . . . . . . . . . . . . . . .26
- Digital . . . . . . . . . . . . . . . . . . . . . . . .25
Merit water still . . . . . . . . . . . . . . . . . . . . . . . . .59
Microtitre plate
- Shaker . . . . . . . . . . . . . . . . . . . . . . .42
Mixers
- Rockers . . . . . . . . . . . . . . . . . . . . . .32, 33
- Rollers . . . . . . . . . . . . . . . . . . . . . . .36
- Rotators . . . . . . . . . . . . . . . . . . . . . .38, 39
- Vortex . . . . . . . . . . . . . . . . . . . . . . . .28
O
Orbital
- Shakers . . . . . . . . . . . . . . . . . . . . . .42 to 44
- Shaker incubator . . . . . . . . . . . . . . .22
Item
Page Number
T
Temperature Controller . . . . . . . . . . . . . . . . . . .49
Test-tube
- Rotators . . . . . . . . . . . . . . . . . . . . . .38, 39
Thermometers . . . . . . . . . . . . . . . . . . . . . . . . . .26, 49
V
Vortex mixers
- Accessory pack . . . . . . . . . . . . . . . .28
- Variable speed . . . . . . . . . . . . . . . . .28
W
Water stills
- Accesories . . . . . . . . . . . . . . . . . . . .60
- Distinction® . . . . . . . . . . . . . . . . . . .58
- Merit . . . . . . . . . . . . . . . . . . . . . . . .59
P
Platform shakers . . . . . . . . . . . . . . . . . . . . . . . .43, 44
R
Retort rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53, 54
Rockers
- Labscale . . . . . . . . . . . . . . . . . . . . . .33
- Mini . . . . . . . . . . . . . . . . . . . . . . . . .32
- Gyro rocker . . . . . . . . . . . . . . . . . . .32, 33
- See Saw . . . . . . . . . . . . . . . . . . . . . .32, 33
Roller mixers . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Rotators
- Blood tube . . . . . . . . . . . . . . . . . . . .38, 39
- Test tube . . . . . . . . . . . . . . . . . . . . .38, 39
S
Shakers
- Labscale . . . . . . . . . . . . . . . . . . . . . .44
- Microtitre . . . . . . . . . . . . . . . . . . . . .42
- Mini . . . . . . . . . . . . . . . . . . . . . . . . .43
- Orbital . . . . . . . . . . . . . . . . . . . . . . .43, 44
Stirrers
- Battery operated . . . . . . . . . . . . . . .50
- Ceramic top . . . . . . . . . . . . . . . . . . .46
- Heavy duty . . . . . . . . . . . . . . . . . . . .47
- Hotplate . . . . . . . . . . . . . . . . . . . . . .48, 51 to 54
- Metal top . . . . . . . . . . . . . . . . . . . . .47
Stir Bars
- Dynalon Kit . . . . . . . . . . . . . . . . . . .47
63
CE compliant
Fully CE compliant
All Stuart products are designed and built to meet the very
highest European safety standards.
They have been thoroughly examined and approved by a
fully accredited independent test house which allows us to
apply the CE mark and we can supply a Certificate of
Conformity with each product.
But you don’t need to take our word for it . . . we’re so
proud of our paperwork and technical information to back
up our complete conformity to the latest EU Directives, we’re
keen to show it off.
For your complete peace of mind, and in order to fulfil your
own regulatory requirements, all of our product’s
independent test reports are available on request.
Please see our website for more details at:
www.barloworld-scientific.com
64
Barloworld Scientific Laboratory Group US
350 Commerce Drive, Rochester, NY 14623 USA
www.dynalabcorp.com www.carbolite.us
barlowus@dyna-labware.com
Copyright: 2006
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising