Samsung SCH-A990 Verizon Wireless User guide

Add to my manuals
232 Pages

advertisement

Samsung SCH-A990 Verizon Wireless User guide | Manualzz

SCH-a990 Series

P O R T A B L E

A l l D i g i t a l

M o b i l e P h o n e

User Guide

Please read this manual before operating your phone, and keep it for future reference.

ZF05_CBa990_060506_D8

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone

System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual

Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA),

L.P.

Headquarters:

1301 E. Lookout Drive

Richardson, TX 75082

Customer Care Center:

1000 Klein St.

Plano, TX 75074

Toll Free Tel: 1.888.987.HELP (4357)

Fax: 972.801.6065

Internet Address: http://www.samsungusa.com

©2006 Samsung Telecommunications America, L.P. is a registered trademark of Samsung Electronics America, Inc. and its related entities.

Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204;

5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.

Printed in Korea

GH69-03367A

Openwave® is a registered Trademark of Openwave, Inc.

RSA® is a registered Trademark RSA Security, Inc.

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY

CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH

THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS

IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED

WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT

TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE

MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR

ANY PARTICULAR PURPOSE OR USE; THE DESIGN,

CONDITION OR QUALITY OF THE PRODUCT; THE

PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP

OF THE PRODUCT OR THE COMPONENTS CONTAINED

THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE

REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR

CONTRACT PERTAINING THERETO. NOTHING

CONTAINED IN THE INSTRUCTION MANUAL SHALL BE

CONSTRUED TO CREATE AN EXPRESS OR IMPLIED

WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT

TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE

LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING

FROM THE PURCHASE OR USE OF THE PRODUCT OR

ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,

INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL

DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR

BENEFITS.

Table of Contents

Section 1: Getting Started .................................. 9

Turning Your Phone On and Off ........................................ 10

Setting Up Voicemail ........................................................ 10

Understanding this User Manual ....................................... 11

Section 2: Understanding Your Phone ............. 13

Features of Your Phone .................................................... 14

Open View of Your Phone ................................................. 15

Closed View of Your Phone ............................................... 17

Back View of Your Phone .................................................. 19

Command Keys ................................................................ 20

Understanding the Display Screen .................................... 22

Battery ............................................................................. 26

Removable Memory Card Storage .................................... 29

Phone Memory Storage .................................................... 30

Section 3: Call Functions .................................. 31

Making a Call ................................................................... 32

Answering a Call .............................................................. 33

Recent Calls ..................................................................... 33

Roaming .......................................................................... 37

TTY .................................................................................. 38

VoiceSignal™ .................................................................. 39

Section 4: Menu Navigation ............................. 53

Menu Navigation .............................................................. 54

Menu Outline ................................................................... 57

Section 5: Entering Text ................................... 65

Changing the Text Entry Mode .......................................... 66

Using VoiceMode .............................................................. 67

Using Word Mode ............................................................. 69

Entering Upper and Lower Case ....................................... 70

Table of Contents 5

6

Entering Symbols .............................................................70

Entering Numbers ............................................................71

Section 6: Understanding Your Contacts ......... 73

Opening Contacts Menu ...................................................74

Adding a Contact ..............................................................75

Adding Pauses .................................................................78

Contact Groups .................................................................79

Finding a Contacts Entry ...................................................83

Editing an Existing Contact Entry ......................................83

Deleting a Contact Entry ...................................................84

Storing Numbers After a Call ............................................84

Speed Dialing ...................................................................85

My Name Card .................................................................86

Finding My Phone Number ...............................................87

Section 7: Messaging ....................................... 89

Types of Messages ...........................................................90

Retrieving New Messages ................................................90

Creating and Sending TXT Messages ................................91

Creating and Sending PIX/FLIX Messages .........................93

Receiving PIX/FLIX Messages ...........................................96

New Sketch Messages .....................................................97

Message Folders ..............................................................98

Changing Message Settings ...........................................103

Voicemail .......................................................................105

E-Mail ............................................................................106

Mobile IM .......................................................................107

Chat ...............................................................................107

Section 8: Changing Your Settings ................ 109

My Account ....................................................................110

Tools ..............................................................................110

Sounds Settings .............................................................111

Display Settings .............................................................114

Phone Settings ............................................................... 119

Call Settings ................................................................... 128

Bluetooth Settings .......................................................... 133

Memory ......................................................................... 136

Phone Info ...................................................................... 136

Section 9: Multimedia .................................... 139

Get It Now ...................................................................... 140

Get Tunes & Tones ......................................................... 141

Get PIX & FLIX ................................................................ 151

Printing Pictures Using PictBridge .................................. 164

Get Fun & Games ........................................................... 166

Get News & Info ............................................................. 166

Get Going ....................................................................... 167

Get Extras ...................................................................... 168

Section 10: Tools ............................................ 169

Voice Commands ........................................................... 170

Calculator ...................................................................... 172

Calendar ........................................................................ 174

Alarm Clock ................................................................... 177

World Clock .................................................................... 179

Stop Watch .................................................................... 180

Notepad ......................................................................... 180

Section 11: Mobile Web .................................. 183

Mobile Web .................................................................... 184

Launching Mobile Web ................................................... 184

Exit Mobile Web ............................................................. 184

Navigate the Web ........................................................... 185

Mobile Web Soft Keys .................................................... 185

Links .............................................................................. 187

Place a Call While Using Mobile Web .............................. 187

Section 12: Health and Safety Information .... 189

Health and Safety Information ........................................ 190

Table of Contents 7

8

UL Certified Travel Adaptor .............................................192

Consumer Information on Wireless Phones .....................192

Road Safety ....................................................................202

Operating Environment ...................................................205

Using Your Phone Near Other Electronic Devices ............205

Potentially Explosive Environments .................................208

Emergency Calls .............................................................208

FCC Notice and Cautions ................................................210

Other Important Safety Information .................................210

Product Performance ......................................................211

Availability of Various Features/Ring Tones .....................213

Battery Standby and Talk Time .......................................214

Battery Precautions ........................................................214

Care and Maintenance ....................................................216

Section 13: Warranty Information .................. 219

Standard Limited Warranty .............................................220

Index ............................................................... 227

Section 1: Getting Started

Topics Covered

• Turning Your Phone On and Off

• Setting Up Voicemail

• Understanding this User Manual

This section allows you to start using your phone by activating your service, setting up your voicemail, contacting customer support, or getting an understanding of how this manual is put together.

Section 1: Getting Started 9

Turning Your Phone On and Off

Turning Your Phone On

1. Open the flip, then press .

Note: As with any other radio-transmitting device, do not touch the internal antenna as it affects call quality and may cause the phone to operate at a higher power level than is necessary. The internal antenna is located along the top on the back side of your phone.

2. Your service provider’s name momentarily appears in the display and the phone begins searching for a network signal.

3. Once the phone finds a signal, the time, date, and day appear in the display.

4. You’re now ready to place and receive calls.

If your phone is outside the Verizon Wireless coverage area the roaming icon appears in the top of the display.

Turn Your Phone Off

Press and hold for two or more seconds. Your phone powers off.

Setting Up Voicemail

Voicemail allows callers to leave voice messages, which can be retrieved any time.

Note: Once you have set up your Voicemail account, you can use the

Messaging option Voicemail (option 5) to view details of voice messages in

your voice mailbox (see “Voicemail” on page 105 for more information).

10

Understanding this User Manual

Voicemail Setup

1. In standby mode, press and hold the key or press

, , , .

2. Follow the prompts in the new user tutorial to setup your mailbox.

Listen to Voicemail

1. In standby mode, press and hold the key or press

, , , .

2. You are then prompted to enter your password followed

3. Follow the recorded prompts to listen to messages, change administrative options, and so on.

Understanding this User Manual

The chapters of this manual generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins

on page 227.

Also included is important safety information that you should know before using your phone. Most of this information is near the back of the guide, beginning on

page 189.

Section 1: Getting Started 11

Notes and Tips

Throughout this guide are icons and text that are set apart from the rest. These are intended to point out important information, quick methods for activating features, to define terms, and more. The definitions for these methods are as follows:

• Notes : Explain alternative options within the current feature, menu, or sub-menu.

• Tips : Provide quick or innovative methods for performing functions related to the subject at hand.

• Important : Points out important information about the current feature that could affect performance, or even damage your phone.

12

Section 2: Understanding Your Phone

Topics Covered

• Features of Your Phone

• Open View of Your Phone

• Closed View of Your Phone

• Back View of Your Phone

• Command Keys

• Understanding the Display Screen

• Battery

• Removable Memory Card Storage

• Phone Memory Storage

This section outlines some key features of your phone. It also displays the screen and the icons that are displayed when the phone is in use.

Section 2: Understanding Your Phone 13

Features of Your Phone

• Domestic and international voice service (available on participating networks).

• High speed data (CDMA 2000 1x Technology)

• 3.2 Mega Pixel Camera

• Camcorder

• PictBridge Digital Print

• TV-Out Option

• EVDO 1x Technology

• VCast Music and Video

• Global Positioning (GPS) Technology

• PIM Functions

• TXT Messaging

• PIX Messaging (MMS)

• FLIX Messaging (MMS)

• E-mail Messaging

• Mobile IM

• Chat

• Advanced Speech Recognition

• Speakerphone

• microSD™ Memory Card Slot

• Music Player

• Bluetooth ® Wireless Technology **

14

Open View of Your Phone

** The SCH-a990 supports the wireless headset profile, hands free profile, serial port profile, dial-up networking profile and basic print profile for

Bluetooth wireless technology. The SCH-a990 does not support all

Bluetooth OBEX profiles. Go to www.verizonwireless.com/bluetoothchart to check vehicle/accessory compatibility.

Open View of Your Phone

The following illustrations show the main elements of your phone:

Section 2: Understanding Your Phone 15

Features

1. Earpiece: The earpiece allows you to hear the other caller.

2. Navigation Key: This key allows you to scroll through the phone menu options.

3. Left Soft Key Option: This key is used to navigate through menus and applications by selecting the choice available in the Left Soft key Option.

4. Camera/Camcorder Key: Launches the Camera/

Camcorder feature of your phone.

5. Send Key: Allows you to place or receive a call. In standby mode, press the key once to access the recent call log.

6. Voicemail Key: Press and hold to automatically dial your voicemail.

7. Alpha-numeric Keys: Use these keys to enter numbers, letters, and characters.

8. Special Function Keys: Enters special characters.

Performs various functions.

9. Power/Accessory Connector: The power/accessory interface connector is used to plug in the charging accessories and also connect any available accessory cables to your phone.

10. Microphone: The Microphone allows the other caller to hear you clearly when you are speaking to them.

11. CLR Key: Deletes characters from the display when you are in text entry mode. Press to return to the previous menu or screen when navigating features on your phone.

16

Closed View of Your Phone

12. End Key: Ends a call. If you press and hold the END key, to power On or Off. When you receive an incoming call, press to send the call to voicemail.

13. Voice Recognition Key: Press to enable VoiceSignal™.

14. Right Soft Key: This key is used to navigate through menus and applications by selecting the choice available in the Right Soft key Option.

15. OK Key: Pressing when navigating through a menu accepts the highlighted choice in a menu.

16. Display: Display shows signal and battery strength, alarm, time, day, and date. It also displays incoming calls and messages.

Closed View of Your Phone

Features

1. Rewind Key: Music rewind key.

Section 2: Understanding Your Phone 17

2. Play/Pause Key: Music play or pause toggle key.

3. Speaker: Music, Ringtones, and Sounds are played through the speaker.

4. Fast Forward Key: Music fast forward key.

5. Headset/Audio Video Jack: Allows you to plug in an optional headset for safe, convenient, hands-free conversations.

6. microSD™ Memory Card Slot: This expansion slot allows you to insert a microSD™ memory card to for additional memory and storage capacity.

7. External Display: External display shows signal and battery strength, alarm, time, day, and date. It also displays incoming calls or messages.

Closed View

18

1. Speaker: Music, Ringtones, and Sounds are played

Back View of Your Phone through the speaker.

2. Options Button: In landscape mode press to access camera options.

3. Volume/Zoom In/Out Key: Allows you to adjust the master volume in standby mode (with the flip open) or adjust the voice volume during a call. To mute the ringer during an incoming call, press the volume key up or down. When the flip is closed, press and hold the key, and sub LCD displays. In landscape mode, press to zoom in/out on an object.

4. Speakerphone Key: Press to enable/disable the speakerphone option.

5. Photo Capture Key: Press to captue an image.

Back View of Your Phone

1. Camera/Camcorder Lens Cover Switch: Allows you to cover/uncover camera lens when the camera is not in use.

Section 2: Understanding Your Phone 19

2. Camera/Camcorder Lens Cover: Covers the camera lens when camera is not is use.

3. Camera/Camcorder Lens: The lens of your built-in camera/camcorder.

4. Flash: The built in flash has manual and automatic capabilities.

Command Keys

Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the left soft key and the right soft key .

Left Soft Key

Some functions of the left soft key are as follows.

• In standby mode, press the Message ( left) soft key to open the Message menu.

• When the left soft key function is Settings, press the Settings

( left) soft key to view settings for the feature.

• When the left soft key function is Edit, press the Edit (left) soft key to edit a Contact or Profile setting.

Right Soft Key

Some functions of the right soft key are as follows.

• In standby mode, press the Contacts (right) soft key to open your Contacts list.

• When the right soft key function is Options, press the Options

(right) soft key to view more options for the current menu.

20

Command Keys

Clear Key

The CLR key is used to erase or clear numbers, text, or symbols from the display. You can also use to return to a previous menu or to return to standby mode from any menu.

• If you enter an incorrect character, briefly press to backspace (and delete) the character.

• To erase the previous word in a sentence, press and hold .

• To back up one menu level, briefly press .

• To return to standby mode from any menu, press and hold until you return to standby mode.

End Key

• Press and hold the End key to turn your phone on or off.

• Briefly press once to disconnect a call.

• Press to return to standby mode from any menu, or to cancel the last input.

Send Key

The Send key is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed.

• Press once to answer calls.

• Enter a number and briefly press to make a call.

• Briefly press in standby mode to display a list of recent calls to and from your phone.

• Press twice in standby mode to call the most recently dialed, received, or missed number.

• Press to pick up a waiting call. Press again to switch back to the other call.

Section 2: Understanding Your Phone 21

Navigation Key

Use the directional keys on the navigation key to browse menus, sub-menus, and lists. Each key also acts as a shortcut to launch applications. The down navigation key is user-definable.

Speakerphone Key

Use the speakerphone key to switch from using the earpiece to the speakerphone before or during a call.

Use the volume/zoom key (located on the right side of your phone) to adjust the volume. Press the speakerphone key to enable and disable the speakerphone option.

Understanding the Display Screen

The top line of the display is reserved for icons that indicate network status, battery power, signal strength, and so on. The next line up from the bottom of the idle screen can show icons that indicate features/functions statuses. Listed below are display icons and their descriptions.

Display icons

Signal Strength: Always appears when your phone is on and indicates the current signal strength. More bars indicate a stronger signal. The characters between the antenna icon and the signal strength bars indicate the following:

22

Understanding the Display Screen

EV1X (as shown) indicates your phone is using the EVDO/

1X protocol, which is capable of high-speed broadband data (3G).

EVD indicates your phone is using the EVDO 2G data protocol.

Note: The EVDO/1X protocol is available only in the Verizon Wireless network.

S tandalone Mode: Appears when Standalone Mode is on. When on, all RF functions for your phone are disabled, and you cannot use your phone to place or receive calls.

Roaming: Your phone is outside your home area. While roaming, another wireless provider may be handling your call. The service rate for the call may be higher than those made from within your home area. Please refer to Verizon

Wireless for roaming rates.

SSL : Indicates the secure socket layer is active transmits your communications over the internet in an encrypted format.

Voice Privacy : Prevents eavesdropping over a CDMA traffic channel.

No service: Your phone cannot find a signal because you’re outside a service area. You cannot make or receive calls. Wait for a signal or move to an open area to find a signal. This indicator always appears when you first turn on your phone and disappears once service is located.

Dormant : Indicates no incoming or outgoing data.

Voice Call: Indicates a call in progress. When dialing a number, this icon flashes until the call connects

Section 2: Understanding Your Phone 23

24

Data Call: Indicates a call in progress. When dialing a number, this icon flashes until the call connects.

E911: Global Positioning Service (GPS) for 911 is set to

On for emergency calls only.

Location On : Global Positioning Service is set to On for location and 911 calls.

Bluetooth: Indicates that Bluetooth wireless technology is active.

Bluetooth Connected: Indicates Bluetooth wireless technology is active and connected.

Battery Level : More bars indicate a greater charge.

When the battery is low, an empty battery icon flashes and the phone sounds an alert, which indicates your phone is about to shut down.

TTY : Indicates that TTY is enabled.

All Sounds Off : The ringer is silenced for all alerts, incoming calls, and incoming messages.

Alarm Only: Your phone will only ring when the set alarm sounds.

Vibrate Only : Your phone vibrates upon receiving a call.

Speakerphone: Your phone switches to speakerphone instead of earpiece.

Missed Calls : Your phone displays this icon when calls are missed.

New Message : You’ve received a new text, page or web alert message. You’re also notified of a new message by animations and sound. You have one or more unread voicemail messages in your voicemail box.

(Only applicable on Verizon Wireless Network.)

Understanding the Display Screen

Calendar Appointment : Your phone displays this icon when you have a calendar appointment scheduled.

Voicemail : You’ve received a voicemail message, page or web alert message.

Alarm On : Indicates that your phone has a set alarm.

Auto Answer: Automatic answer is enabled. Your phone automatically picks up calls after the designated time with stereo headset or bluetooth headset connected.

Dialogue boxes

Dialogue boxes prompt for action, inform you of status, or warn of situations such as low memory. Dialogue boxes and their definitions are outlined below.

• Choice

䢇 Example: “Save message draft?”

• Reconfirm

䢇 Example: “Delete all received messages?”

• Performing

䢇 Example: “Sending...” “Connecting...”

• Completed

䢇 Example: “Message sent successfully!”

• Information

䢇 Example: “New Message”

• Error

䢇 Example: “System Error!”

Section 2: Understanding Your Phone 25

• Warning

䢇 Example: “Battery Low,” “Memory Full!”

Battery

Note: This phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel charger.

Important: Although the phone can be used while the battery is charging, the battery must be fully charged before first use, otherwise you risk damaging the battery.

Using A Non-Supported Battery

Samsung handsets do not support the use of a nonsupported battery.

When using a non-supported battery you will hear a series of beeps and you will see a warning message that indicates

“NON SUPPORTED BATTERY

SEE USER GUIDE.” If you receive this warning, battery charging has been disabled.

Samsung charging accessories (i.e. travel adapter, and cigarette lighter adapter) will only charge a Samsung approved battery.

To continue use of your Samsung handset press .

Note: When using a non-supported battery the handset can only be used for the duration of the battery life and cannot be recharged.

26

Battery

Important: Using a non-supported battery may cause damage to your phone. Use a Samsung supported battery only.

Install the Battery

1. Slide the battery cover down and lift up to remove it.

2. Insert the top end of the battery in the direction of the arrow printed on the battery into the phone housing. The gold contacts on the top of the battery should match up with those on the phone.

3. Push the top end of the battery down until it snaps into place.

4. Slide the battery cover up until it snap into place.

Remove the Battery

1. Slide the battery cover down and lift up to remove it.

2. Use your finger to lift the battery (bottom end first) up and away from the phone.

Section 2: Understanding Your Phone 27

Charge the Battery

Your phone is powered by a rechargeable standard Liion battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Using other accessories may invalidate your warranty and may cause damage.

Note: For connection to an electrical supply not located in the U.S., you

must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage your phone and void your warranty.

Travel Charger

The travel charger is a convenient, light-weight charger that rapidly charges your phone from any 120/ 220

VAC outlet.

1. Plug the large end of the travel charger into a standard 120/220 VAC wall outlet.

2. Insert the smaller end of the travel charger into the charger/ accessory connector at the bottom end of the phone.

Tip: You can use your phone while charging, however, the battery charges faster if the phone is turned off.

28

Removable Memory Card Storage

Battery Indicator

The battery indicator in the upper-right corner of the display indicates battery power level. Four bars indicate a full charge, while an empty icon indicates an almost empty battery. Two to three minutes before the battery becomes too low to operate, a blinking empty battery icon appears and a tone sounds. If you continue to operate the phone without charging, it shuts down.

Removable Memory Card Storage

Note: Your phone does not come with the microSD™ memory card, it must be purchased as an accessory. See your service provider for more information.

The following file types can be saved to the removable microSD™ memory card:

My PIX: Pictures you have saved from a PIX message or taken using your phone.

My FLIX: Video Clips you have saved from a FLIX message or taken using your phone.

My Music: Music you have downloaded directly from the V

CAST Music catalog or music you have transferred from your

PC using Sync Music.

My Sounds: Sounds you have recorded using your phone or saved from a PIX message with Sound attached.

Section 2: Understanding Your Phone 29

Phone Memory Storage

The following file types can be saved to the phone memory storage area:

My PIX: Pictures you have saved from a PIX message, downloaded via the “Get It Now” application, or taken using your phone.

My FLIX: Video Clips you have saved from a FLIX message, downloaded via the “Get It Now” application, or taken using your phone.

My Ringtones: Ringtones you have downloaded via the “Get It

Now” application, or saved from a PIX message with Ringtone attached.

My Music: Music you have downloaded directly from the V

CAST Music catalog or music you have transferred from your

PC using Sync Music.

My Sounds: Sounds you have downloaded, recorded using your phone, or saved from a PIX message with Sound attached.

30

Section 3: Call Functions

Topics Covered

• Making a Call

• Answering a Call

• Recent Calls

• Roaming

• TTY

• VoiceSignal™

This section allows you to make or answer a call. It also includes the features and functionality associated with making or answering a call.

Section 3: Call Functions 31

Making a Call

1. At the standby screen, enter the number you want to call using the keypad.

2. Press .

Making Calls Using Contacts

Contacts are entries that you create to store names, numbers, and other information for people or groups of interest. If you’ve already entered information into your

Contacts list, you can recall and dial the contact easily.

See “Adding a Contact” on page 75 for information on

creating contacts.

1. At the standby screen, press the right soft key

Contacts.

2. Press the Volume/ Zoom key on the right side of your phone or the up/down navigation keys until the contact you want to call is highlighted.

Tip: To quickly locate a name, press (or multi-press) any key on the keypad that corresponds to the first, second, and/or third letters of the contact’s name.

3. When the desired contact is highlighted, press

VIEW. Details for the contact appear in the display.

4. If the entry contains more than one number, press the

volume/zoom key to highlight the desired number.

5. Press to call the number.

32

Answering a Call

Answering a Call

When you receive an incoming call, the Incoming screen appears in the display, press the key to answer the call or press the right soft key Ignore, to send the call to voicemail, or press the left soft key Quiet, to silence the ringer.

Note: To change the answer options, see “Answer Options” on page 128.

Answering Call-Waiting Calls

• When you receive a call while on a call, the Incoming screen displays. You can press and answer the new call or let the new call go to your voicemail.

• If you choose and answer the incoming call, the original caller is placed on call waiting. To return to your original call when you finish with an incoming call, press the Send key.

Recent Calls

When you place, miss, or receive a call, a record of the call is saved in Recent Calls, which is a listing of the different types of calls you can either receive or make. These types of calls are listed below.

• Missed: Displays any missed calls.

• Received: Displays any received calls that were answered.

• Dialed: Displays all outgoing calls made from your phone.

All: Displays all missed, received, and outgoing calls made from your phone.

View Timers: Displays the length of call types and data pushed and pulled from your phone

Section 3: Call Functions 33

Viewing Call Information

Recent Calls retains information such as the duration, date and time, and whether the call was received, dialed, or missed.

1. At the standby screen, press the key.

2. Press the down navigation key to highlight the desired number.

3. Once the desired number is highlighted, press

OPEN.

4. The following options appear in the display:

“type” call: Where “type” indicates if the call was missed, dialed, or received.

䢇 Name: If the caller is in your Contacts list, their name is listed here. This option only appears if the caller is in your Contacts list.

䢇 Number: Displays the telephone number as well as the appropriate icon to indicate mobile, work, or home number.

Time: The time of the call.

Date: The date of the call.

䢇 Duration: The duration of the calls made or receive.

5. Press the right soft key Options to display the following options:

Save: Save the number to your Contacts list.

Details : If the caller is in your Contacts list, their information displays. This option only appears if the caller is in your

Contacts list.

Erase: Delete the call from Call History.

䢇 Lock/Unlock: locks or unlocks the entry to prevent accidental deletion.

34

Recent Calls

Erase All: Delete the entire Call History list at one time.

View Timers: Select to view the call timers for your phone.

6. Press the down navigation key to highlight an option.

Press to enter the highlighted option’s sub-menu.

Call History Icons

When you view Recent Calls, an icon to the left of the number indicates the type of call.

Indicates a Missed call

Indicates a Dialed call

Indicates a Received call

Making Calls Using Call History

1. At the standby screen, press then press up or down navigation key until the desired number is highlighted.

2. Press to call the highlighted number. Or, you can press to call the highlighted number.

Creating or Updating Contacts Using Call History

1. At the standby screen, press then press up or down navigation key until the desired number is highlighted.

2. Press the right soft key Options. Save is highlighted. Press .

3. Use the up or down navigation keys to highlight Create

New or Update Existing. Press .

Section 3: Call Functions 35

4. Use the up or down navigation keys to highlight one of the following options:

䢇 Mobile 1

Mobile 2

Home

䢇 Work

䢇 Fax

5. Press to add a new contact, and then enter information.

6. Use the navigation keys to enter additional information for the entry and then press SAVE.

Delete Call History Entries

1. At the standby screen, press then press up or down navigation key until the desired number is highlighted.

2. Press the right soft key Options. A pop-up menu appears in the display.

3. Press the down navigation key to highlight Erase and up screen.

4. Press .

Delete All Call History Entries

1. At the standby screen, press .

2. Press the right soft key Options. A pop-up menu appears in the display.

3. Press the down navigation key to highlight Erase All and

ENTRIES? pop-up screen.

4. Press .

36

Roaming

Roaming

What is Roaming?

Your phone can roam on other digital networks. Roaming occurs when you travel outside a pre-designated coverage area. The roaming icon displays when roaming is active and extra charges may apply when making or receiving calls.

Note: Some features may be unavailable while roaming.

Roaming Options

The following roaming options are available:

Home Only - Your phone is available for normal operation only in the designated coverage area.

Automatic-A: The preferred roaming list is used to acquire service. If no preferred systems are found, any digital "A" system is acquired.

Automatic-B: The preferred roaming list is used to acquire service. If no preferred systems are found, any digital "B" system is acquired.

Note: Contact your service provider for information regarding preferred systems.

To change your Roaming option, follow these steps: highlight SETTINGS & TOOLS.

3. Press System Select.

Section 3: Call Functions 37

4. Use the up or down navigation keys to choose the setting you want, and press .

TTY

Your phone is fully TTY compatible. Connect the TTY equipment to the headset jack, which is located on the right side of the phone. Before you can use your phone with a TTY device, you’ll need to enable TTY functions in the phone.

Note: Enabling TTY disables headset audio.

38

4. A warning appears in the display stating “ENABLING

TTY WILL DISABLE HEADSET AUDIO. CONTINUE?”

䢇 Use the up or down navigation key to highlight Yes and press

to proceed to TTY MODE screen.

䢇 Use the up or down navigaton key to highlight No and press

to return to Call Settings menu.

5. Use the up or down navigation keys to select one of the following:

TTY Full

TTY + Talk (VCO)

TTY + Hear (HCO)

TTY Off

6. Press to make your selection. The TTY Mode Set screen displays.

VoiceSignal™

VoiceSignal™

VoiceSignal is advanced speech recognition software that can be used to activate a wide-variety of functions on your phone. VoiceSignal software automatically voice activates all contacts for voice dialing, message addressing and searching, no pre-recording or training needed. When using VoiceSignal, speak naturally but clearly. Names should be spoken exactly as they are spelled in the contact list.

VoiceSignal Settings

You can adjust the settings and preferences for

VoiceSignal by opening Voice Commands menu in the

Tools menu. Using this menu, you can change the following Voice Command features:

• Digit Dial Adaptation

• Reset Digit Dial Adaptation

• Choice list behavior

• Voice recognition sensitivity

• VoiceSignal sound and TTS settings

• VoiceMode Adaptation and Tutorial

To access the VoiceSignal Settings menu, follow these steps:

1. At the standby screen, press MENU. Use the right navigation key to highlight SETTINGS & TOOLS.

2. Press Tools, then Voice Commands, and

Voice Settings.

Section 3: Call Functions 39

40

3. Use the navigation keys to select the setting you want to change. The following options are available:

Choice Lists: If VoiceSignal is not absolutely confident that it has correctly identified a name or number, it can display a choice list of up to three possibilities, and prompt you to confirm the correct one. You can control when choice lists appear by changing the Choice Lists setting to the following:

䢇 Automatic: VoiceSignal displays a choice list when it is not confident it has identified the correct choice from among multiple alternatives.

䢇 Always On: When there are multiple alternatives,

VoiceSignal always displays a choice list.

Always Off: VoiceSignal never displays a choice list. Instead, the application picks the best from among the possible choices.

Sensitivity: In VoiceSignal, sensitivity controls the balance between rejecting too much, which means the phone frequently does not recognize names, numbers, or commands, and rejecting too little, which means it frequently recognizes something even if nothing was said.

When VoiceSignal rejects an utterance, it displays a message such as “Please repeat…” or “No match found.” If you frequently experience these messages, you might be able to get better recognition by adjusting the Sensitivity setting toward Reject Less. If you frequently experience false activations (VoiceSignal detects a wrong match), you might be able to get better performance by adjusting the

Sensitivity setting toward Reject More.

Digit Dialing: Use the Digit Dialing menu to adapt digit dialing to your voice.

Adapt Digits: Lets you adapt digits, which can improve voice recognition of phone numbers. Adaptation takes about

60 seconds.

VoiceSignal™

䢇 Reset Digits: Erases any digit adaptation you have done and resets digit recognition to the factory default. If you have not adapted digits, this option is grayed out.

Sound: You can customize the VoiceSignal user interface by turning playback on or off for prompts, names, and numbers.

You can also change the speed and volume of name playback.

Prompts: Turns playback on or off for prompts such as

“Please say a command.”

Note: If you turn prompts off, you can still successfully use VoiceSignal by listening to the expert mode tones in place of the prompts.

䢇 Digits: Turns playback on or off for digits, for example, when confirming a phone number.

Names: Turns playback on or off for names.

䢇 Name Settings: Adjusts the speed and volume of name playback and Voice Announce Caller ID feature.

VoiceMode: Lets you adapt words, which can improve voice recognition in the TXT messaging,PIX messaging, and FLIX messaging clients.

Adapt VoiceMode: Lets you Adapt VoiceMode to your voice, which improves voice recognition of VoiceMode. You must use the adapt VoiceMode feature in a quiet room for best results.

䢇 Reset VoiceMode: Erases any VoiceMode enrollment data that is currently stored. If you have not adapted VoiceMode, this option is grayed out.

Tutorial: Displays the VoiceMode tutorial.

About: Displays information about VoiceSignal including version number, build number, and device number.

Section 3: Call Functions 41

You can also access the VoiceSignal Settings menu by following these steps:

1. In standby mode, press the key.

2. Press the right soft key Settings.

3. Use the navigation keys to select the setting you want to change.

Adapting VoiceSignal

Voice dialing works well for most people without special adaptation. However, people with strong accents or unique voice characteristics may receive better results after adapting the system to match their voices.

You should adapt Digit Dial only if the system is frequently unable to recognize your speech. After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will not be able to use it reliably unless they reset the phone to factory defaults.

Adaptation involves recording several digit sequences to adapt the system to the unique properties of your voice.

The adaptation process takes about three minutes.

Tips for adapting Digit Dial

• Adapt digits in a quiet place.

• Make sure you wait for the beep before starting to speak.

• Speak clearly, and say each digit distinctly.

• If you make a mistake while recording a sequence of digits, or if there is an unexpected noise that spoils the recording, rerecord that sequence.

42

VoiceSignal™

• Only adapt digits if you regularly have problems with digit dialing. Once adapted, digit dialing will not work as well for other people using your phone.

• Adapt Digit Dial to your voice.

Digit Dial Adaptation

To access the Adapt Digits menu, follow these steps:

1. At the standby screen, press MENU. Use the right navigation key to highlight SETTINGS & TOOLS.

2. Press Tools, then Voice Commands.

3. Press Digit Dialing.

4. Adapt Digits is highlighted. Press .

5. A short description of the Adapt Digits displays.

6. Read the description until you are comfortable to proceed, then press .

7. Your phone displays the first digit sequence and “Please say” plays through the speaker followed by the four digits appearing in the display.

Wait for the beep and repeat the digits using your normal tone of voice.

8. After a moment, the phone plays back the recording and prompts “Did the recording sound ok?” If the recording was good, say “Yes.” If you need to re-record, say “No.”

If you say “No,” the phone prompts you to pronounce the digits again. Wait for the beep and then re-record.

Repeat this step until you’re satisfied with the recording.

9. After confirming that the recording sounds ok, repeat the recording process with the next set of digits. After ten sets of digits, the phone indicates that adaptation is complete.

Section 3: Call Functions 43

Reset Digit Dial Adaptation

This option erases an adaptation and resets Digit Dial to its original state.

1. At the standby screen, press MENU. Use the right navigation key to highlight SETTINGS & TOOLS.

2. Press Tools, then Voice Commands.

3. Press Digit Dialing.

4. Highlight . The Reset

Digit Adaptation screen displays requesting confirmation of reset.

Note: If you have not performed the Adapt Digits function, the Reset Digits option will not be accessible.

5. Press to proceed. Digit Adaptation Reset is completed.

VoiceSignal Commands

The following is a list of functions that you can perform using VoiceSignal speech recognition on your phone.

Call <Name or #>: Dial by saying a Name in your Contacts List or a Name and a Location (home, work, mobile).

Send <Msg Type>: Send a Text, Picture, or Video message to a number or to someone in your Contacts List.

Lookup <Name>: Open the contact record for any name in your Contacts List.

Go to <Menu>: Open any application installed on your device.

Check <Item>: Provides details of your coverage, signal strength, and battery level.

44

VoiceSignal™

My Account: Provides detail information about your Verizon

Wireless account.

Help: Provide helpful information on how to use VoiceSignal.

Call Name Dialing

To use Name Dial, you’ll need to have entries stored in

your Contacts list. See page 75 for information on

creating a Contacts list.

1. In standby mode, press the key.

2. After a brief pause, a list of optional commands appears in the display and the audio prompt “Please say a command” plays through the earpiece.

3. As one command, say “Call” followed by a contact entry or phone number. For example, you could say“Call John

Smith," “Call John Smith’s Mobile,” or "Call John Smith at Work." at a distance of 3-12 inches from the phone in a natural voice. The name that you said is repeated through the earpiece and your phone dials the number.

4. If you only say "Call," then“Please say the name, number, voicemail or last number” plays through the earpiece or speakerphone—if it is enabled.

5. To use Name Dialing, say the name of the contact that you want to dial.

6. The name that you said is repeated through the earpiece and your phone dials the number.

7. If VoiceSignal is not sure of the number that you said, a list of possible matches appears in the display.

Section 3: Call Functions 45

8. You’re asked to confirm the correct number as

VoiceSignal displays the results. Say “Yes” or “No” to confirm or reject the number when prompted. You may also say "Cancel" to exit VoiceSignal, or, "Repeat" to restart VoiceSignal from the beginning.

9. The location is repeated through the earpiece and your phone dials the number.

Tip: VoiceSignal voice-activates the entire contact list according to the spelling of the entire name field of each contact entry. Remember to say the entire name of the contact you want to dial, exactly as it is spelled in the contact list.

If VoiceSignal has difficulty recognizing a particular name, try editing the contact name to make it unique. Often times, adding a last name into the name field of the contact entry will help. Avoid using abbreviations or unusual spellings in the name field of any contact you wish to name dial.

Call Digit Dialing

Digit Dial allows you to dial any phone number by simply speaking the digits into the phone. No training is necessary, and Digit Dial is programmed to understand natural speech.

1. In standby mode, press the key.

2. After a brief pause, a list of optional commands appears in the display and the audio prompt “Please say a command” plays through the earpiece or speakerphone—if it is enabled.

3. As a single command, say “Call” followed by a valid 10digit phone number, such as “Call 6-1-7-5-4-3-2-1-0-

1,” at a distance of 3-12 inches from the phone in a natural voice. For best results, speak the sequence of

46

VoiceSignal™ digits naturally and do not pause between each digit. The digits that you say are repeated through the earpiece and your phone dials the number.

4. If you only say "Call," then “Please say the name, number, voicemail or last number” plays through the earpiece.

5. Say the area code and number that you want to dial into the microphone, clearly and naturally. The number that you said is repeated through the earpiece and your phone dials the number.

6. If VoiceSignal is not sure of the number that you said, a list of possible matches appears in the display.

7. You’re asked to confirm the correct number as

VoiceSignal displays the results. Say “Yes” or “No” to confirm or reject the number when prompted.

Note: For dialing 911 or other special service or emergency numbers, you must use the keypad. VoiceSignal will not recognize 911 or other special service numbers.

Send Message

Send <Msg Type> lets you begin composing any of the following types of messages by simply speaking the type of message and digits or a Contact name into the phone:

• TXT

• PIX

• FLIX

• Sketch

Section 3: Call Functions 47

• Postcard

1. In standby mode, press the key.

2. A list of commands appears in the display and the audio prompt “Please say a command” plays through the earpiece or speakerphone—if it is enabled.

3. Say “Send” (for a TXT message) or “Send” and a message type as a single command. “Please say the name or number” plays through the earpiece or speakerphone—if it is enabled.

4. Say a name exactly as it is displayed in your Contacts list, first name followed by last name; or say an area code and number into the microphone, clearly and naturally. The number that you said is repeated through the earpiece.

5. The CREATE MESSAGE screen appropriate to the message type you said into the microphone appears in the display with the name or number you said entered in an address field.

6. Complete and send your message. See “Section 7:

Messaging” on page 89 for more information.

Name Lookup

To perform a name lookup, you’ll need to have some entries in your Contacts list.

1. In standby mode, press the key.

2. A list of commands appears in the display and the audio prompt “Please say a command” plays through the earpiece or speakerphone—if it is enabled.

48

VoiceSignal™

3. In a single command, say “Lookup” followed by the name of a contact entry at a distance of 3-12 inches from the microphone. For example, you could say

“Lookup John Smith."

4. If you only say “Lookup”, “Please say the name” plays through the earpiece or speakerphone—if it is enabled.

To use Lookup, say the name of the contact that you want to look up.

5. Say the name exactly as it is displayed in your Contacts list, first name followed by last name.

6. The contact name appears in the display with other information that you’ve entered for that contact.

Opening Apps

The example that follows instructs you how to open

Messaging. However, you can open Get It Now,

Messaging, Contacts, Recent Calls, and Settings & Tools on your phone using VoiceSignal.

1. In standby mode, press the key.

2. A list of commands appears in the display and the audio prompt “Please say a command” plays through the earpiece or speakerphone—if it is enabled.

3. Say “Go To” at a distance of 3-12 inches from the microphone. A list of options displays and a prompt of

“Please choose” plays through the earpiece or speakerphone. Speak one of the displayed options:

Get It Now

Messaging

Contacts

Recent Calls

Section 3: Call Functions 49

Settings & Tools

4. The menu option spoken opens.

Checking Your Phone Status

Using VoiceSignal, you can visually and audibly check many useful status indicators by voice, including

VoiceMail indicator, Number of messages in your inbox, missed calls, current time, battery strength, signal strength, current volume level.

1. In standby mode, press the key.

2. A list of commands appears in the display and the audio prompt “Please say a command” plays through the earpiece or speakerphone—if it is enabled.

3. As a single command, say "Check" followed by one of the status items. Valid "Check" commands are:

䢇 "Check Status" — Displays and announces all of the available status indicators in sequence through the earpiece or speakerphone—if it is enabled.

䢇 "Check Voicemail" — Displays the number of new voicemail messages.

䢇 "Check Messages" — Displays and announces the number of new voicemail, TXT, and PIX messages through the earpiece or speakerphone—if it is enabled.

䢇 "Check Missed Calls" — Displays the missed call log.

䢇 "Check Time" — Displays and announces the current time through the earpiece or speakerphone—if it is enabled.

䢇 "Check Battery" — Displays and announces the current battery level through the earpiece or speakerphone—if it is enabled.

50

VoiceSignal™

䢇 "Check Signal Strength" — Displays and announces the current EVDO and 1x signal strength levels through the earpiece or speakerphone—if it is enabled.

䢇 "Check Volume" — Displays and announces the current master volume setting through the earpiece or speakerphone—if it is enabled.

Checking Your Account Information

Using VoiceSignal, you can check your Verizon account status by voice command.

Note: This features launches the browser to your account page and requires a data plan and is subject to Verizon's data coverage.

1. In standby mode, press the key.

2. A list of commands appears in the display and the audio prompt “Please say a command” plays through the earpiece or speakerphone—if it is enabled.

3. Say, "My Account" at a distance of 3-12 inches from the phone in a natural voice.

4. The phone's mobile web browser will launch and display your account information. See Section 11, "Mobile Web," for details about configuring and using your mobile web browser.

Section 3: Call Functions 51

52

Section 4: Menu Navigation

Topics Covered

• Menu Navigation

• Menu Outline

This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.

Section 4: Menu Navigation 53

Menu Navigation

Access menus using the navigation keys, two soft keys

, or use a shortcut.

1. In standby mode press MENU. The first of several menus appear in the display.

2. Use the navigation keys to browse phone menus.

3. Press to enter the menu or sub-menu presently appearing in the display.

Return to the Previous Menu

Press to return to the previous menu.

Navigate Using Shortcuts

You can also access menus and sub-menus using menu numbers. This method is often called a “shortcut.” To shortcut to a menu or sub-menu, press MENU, then enter the menu and/or sub-menu number(s) for the

feature in question. Use “Navigation Key Shortcuts” on page 55, for looking up the menu shortcut number.

1. In standby mode, press MENU. The CONTACTS menu is launched.

2. Press the number of the menu, sub-menu, and so on to arrive at the desired feature.

3. Press Business.

54

Menu Navigation

Navigation Key Shortcuts

In standby mode, press a navigation key (as illustrated below) to launch its corresponding application.

*The Shortcut menu is set to Calendar by default, but it can be customized

to select other functions instead. See also “Shortcut Key” on page 119 for

more information.

Quick Search

With the Quick Search option set to On (see also

“Quick Search” on page 126 for more information), you

can identify and select menu options by entering numbers that represent the first few letters of the name of the menu option.

For example:

1. In standby mode, press . The number entry screen appears in the display with the numbers

“5264” showing.

2. Press the down navigation key. The MENU LIST screen appears in the display with the Language option showing and highlighted.

Section 4: Menu Navigation 55

3. Press . The LANGUAGE screen appears in the display with the current Language option setting showing.

Voice Menu Readout

With Menu Readout set to On (see also “Menu

Readout” on page 171 for more information), you can

hear your phone “read” main menu items through the earpiece when you highlight each one.

Call Announcement

With Call Annoncement on (see also “Call

Announcement” on page 171 for more information),

you hear a “Call from <Contact name/number>” voice announcement of a new call instead of a ringtone.

The In-Use Option

Access numerous menus and features even while on a call.

Note: If the call is disconnected while accessing the In-Use Option, the In-

Use Option disappears from the display and the phone eventually returns to standby mode.

1. While in a call, press the right soft key Options. The following menu items appear in the display.

Message : Open the Messages menu.

Contacts : Open the contacts to view.

• Recent Calls : Display your recent incoming, missed and outgoing calls.

• Send DTMF : Sends keypad tones.

56

Menu Outline

Voice Privacy : Prevent recipients of your calls from seeing your number on their display. Select from standard or enhanced options.

Location : Identifies your location to the network.

Voice Memo : Record a voice memo.

2. Use the navigation key to highlight a menu. Press to open the highlighted menu or to activate the feature.

Menu Outline

The following list shows the menu structure and indicates the number assigned to each option.

GET IT NOW

1: Get Tunes & Tones

1: Get V CAST Music

2: Get New Ringtones

1: Get New App.

3: My Ringtones

1: Get New Ringtones

1: Get New App.

4: My Music

Get V CAST Music

Play All Songs

5: My Sounds

1: Record New

6: Sync Music

7: Manage Music

2: Get PIX & FLIX

1: Get V CAST Video

2: Get New PIX

1: Get New App.

3: My PIX

4: My FLIX

Section 4: Menu Navigation 57

5: PIX Place

6: Take PIX

7: Record FLIX

8: Scan Biz Card

3: Get Fun & Games

1: Get New App.

4: Get News & Info

5: Get Going

1: Get New App.

6: Get Extras

1: Get New App.

MESSAGING

1: New Msg

1: TXT Msg

2: PIX Msg

3: FLIX Msg

4: Sketch Msg

5: Postcard

2: Inbox

3: Sent

4: Drafts

5: Voicemail

6: E-Mail

7: Mobile IM

8: Chat

58

CONTACTS

1: New Contact

2: Contact List

3: Groups

1: No Group

2: Business

3: Colleague

4: Family

Menu Outline

5: Friends

4: Speed Dials

5: My Name Card

RECENT CALLS

1: Missed

2: Received

3: Dialed

4: All

5: View Timers

SETTINGS & TOOLS

1: My Account

2: Tools

1: Voice Commands

1: Voice Dial

2: Voice Settings

3: Menu Readout

4: Call Announcement

2: Calculator

3: Calendar

4: Alarm Clock

5: World Clock

6: Stop Watch

7: Notepad

3: Sounds Settings

1: Master Volume

2: Call Sounds

1: Call Ringtone

1: My Ringtones

1: Get New Ringtones

2: My Sounds

3: My FLIX

2: Call Vibrate

3: Alert Sounds

Section 4: Menu Navigation 59

60

1: TXT Message

1: Tone

1: My Ringtones

1: Get New Ringtones

2: My Sounds

2: Vibrate

3: Reminder

2: PIX-FLIX Msg

1: Tone

1: My Ringtones

1: Get New Ringtones

2: My Sounds

2: Vibrate

3: Reminder

3: Voicemail Msg

1: Tone

1: My Ringtones

1: Get New Ringtones

2: My Sounds

2: Vibrate

3: Reminder

4: Device Connect

4: Keypad Volume

5: Earpiece Volume

6: Service Alerts

1: ERI

2: Minute Beep

3: Call Connect

7: Power On/Off

1: Power On

2: Power Off

4: Display Settings

1: Banner

1: Personal

Menu Outline

2: ERI Banner

2: Backlight

1: Display

1: Duration

2: Brightness

2: Keypad

3: Wallpaper

1: Main Screen

1: My PIX

2: My FLIX

2: Front Screen

1: My PIX

4: Display Themes

5: Clock Format

1: Main Clock

2: Front Clock

6: Dialing Font

1: Size

2: Style

5: Phone Settings

1: Standalone Mode

2: Shortcut Key

3: Language

4: Location

5: Security

6: System Select

7: NAM Selection

8: PC Connection

9: Quick Search

6: Call Settings

1: Answer Options

2: Auto Retry

3: TTY Mode

4: One Touch Dial

Section 4: Menu Navigation 61

62

5: Voice Privacy

6: Call Restrictions

1: Outgoing

2: Incoming

3: Contacts

7: Data Settings

8: DTMF Tones

9: Ringer ID

0: Picture ID

7: Bluetooth

1: Add New Device

8: Memory

1: Save Options

1: PIX

2: FLIX

3: Sounds

2: Phone Memory

1: Memory Usage

2: My PIX

3: My FLIX

4: My Ringtones

5: My Music

6: My Sounds

3: Card Memory*

1: Memory Usage

2: My PIX

3: My FLIX

4: My Music

5: My Sounds

9: Phone Info

1: My Number

2: SW Version

3: Icon Glossary

Menu Outline

*A microSD™ card must be insert in the microSD™ card slot on the left side of the a990 for the Card Memory menu to display.

Section 4: Menu Navigation 63

64

Section 5: Entering Text

Topics Covered

• Changing the Text Entry Mode

• Using Word Mode

• Entering Upper and Lower Case

• Entering Symbols

• Entering Numbers

This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the amount of key strokes associated with entering text.

Section 5: Entering Text 65

Changing the Text Entry Mode

1. While composing a message in the Text area, press the right soft key Options to display the following options:

Add: Allows you to add more information or multimedia items to your message.

Graphics: Lists preloaded and downloaded graphics to add to the message.

Animations: Lists preloaded and downloaded animations to add to the message.

Sounds: Lists preloaded and downloaded sounds to add to the message.

Quick Text: Choose from up to 22 messages.

Name Card: Select from My Name Card or Contacts to add to the message.

Edit Text Format: Change text font size, alignment, style, and color.

Save As Draft: Save the message to your Draft folder.

Priority Level: Save the message with a High or Normal priority.

Callback #: Provides the option to send a callback number with the message.

Validity Period: Save the message for the assigned period of time.

Deferred Delivery: Save the message to be delivered at the assigned delivery date and time.

Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has been received.

Add To Contacts: Save the recipients number to your

Contacts as a new entry or add to an existing entry .

66

Using VoiceMode

2. While composing a message, press left soft key Abc to display a pop-up menu with the following Text Entry

Mode options:

VoiceMode

Word

Abc

ABC

123

Symbols

Using VoiceMode

VoiceMode dictation software allows you to convert your speech to text when sending a text message.

Combining VoiceMode with the Send Text voice command, you can address, compose, and send a text message using just your voice and a few keys.

Entering Text

1. In standby mode, press the left soft key Message, then press New Msg, TXT Msg to compose a new text message.

2. Enter the phone number or email address of the recipient, then press the down navigation key to move to the Text field.

3. Press the left soft key Abc to display a pop-up menu containing text entry mode options.

4. Abc is highlighted by default. Use the up/down navigation keys to highlight VoiceMode, then press .

The text entry mode indicator changes from Abc to

Voice.

Section 5: Entering Text 67

5. Press and hold , then begin speaking your text slowly

and clearly into the microphone. See “Tips for Text Entry

Using VoiceMode” on page 68 for more information.

6. Release the key when you are finished speaking or to take a break. Press and hold when you are ready to resume speaking.

Tips for Text Entry Using VoiceMode

• Use VoiceMode in a quiet place.

• Make sure you press and hold the key before starting to speak.

• Speak clearly, and say each word distinctly.

• Pause for a second between each word.

• If you make a mistake or VoiceMode misunderstands you while dictating a message, complete the sentence or message, then correct any errors using the naviigation and keys.

Correcting Errors

VoiceMode recognizes the most frequently used word that matches the word you spoke into the microphone.

To correct a VoiceMode error, do the following:

1. Use the navigation keys to highlight the word to be changed.

2. Press to display other words from the VoiceMode dictionary, if available, or to enter the correct word, if it is not in the dictionary.

3. Use the navigation keys to highlight the desired word, then press to enter the selected word in your message.

68

Using Word Mode

Using Word Mode

Word recognizes the most commonly used word for any sequence of key presses and inserts that word into your message. It’s much faster than the traditional method of text entry (Abc) and requires only one key press per letter of the word that you’re spelling.

1. In standby mode, press the left soft key Message, then press New Msg, TXT Msg to compose a new text message.

2. Enter the phone number or email address of the recipient, then press the down navigation key to move to the Text field.

3. Press the left soft key Abc to display a pop-up menu containing text entry mode options.

4. Abc is highlighted by default. Use the up/down navigation keys to highlight Word, then press .

Now, for practice, enter the word “Hello” into your message by pressing each of the following keys only once:

H E L L O

Word recognizes that the most frequently used word for the sequence you entered is “HELLO.” If more than one word shares the same sequence, Word provides the most common. Press to display other words in the dictionary, if available.

Section 5: Entering Text 69

Entering Upper and Lower Case

• Enter characters while in ABC mode by pressing the key that contains the desired characters for “H”.

• Press the key repeatedly to cycle through other available characters for that key.

• Pause briefly when the desired character appears in the display to accept the character and therefore insert it into the message.

• Press to enter a space.

• To cycle between uppercase, lower case, and initial caps for characters in ABC mode, briefly press .

Entering Symbols

Symbol mode enables you to enter symbols such as @ or% into a text message.

1. In standby mode, press the left soft key Message, then press New Msg, TXT Msg to compose a new text message.

2. Enter the phone number or email address of the recipient, then press the down navigation key to enter text.

3. Press the left soft key Abc to display a pop-up menu containing the text entry mode options.

4. Abc is highlighted by default. Use the up/down navigation keys to highlight Symbols, then press .

The first of three screens containing symbols appears in the display.

5. Press Next to page through the other symbols, if necessary.

70

Entering Numbers

6. Enter the key that corresponds with the symbol that you wish to enter. For example, press for an exclamation point (!) on the first page of symbols.

7. Repeat steps 3 through 6 to insert as many symbols into your message as desired.

Entering Numbers

Enter numbers into a text message while in number

mode (123). See "Changing the Text Entry Mode" on page 66 for instructions on changing text entry modes.

1. In standby mode, press the left soft key Message, then press New Msg, TXT Msg to compose a new text message.

2. Enter the phone number or email address of the recipient, then press the down navigation key to enter text.

3. Press the left soft key Abc to display a pop-up menu containing the text entry mode options.

4. Abc is highlighted by default. Use the up/down navigation keys to highlight 123, then press .

5. Press the keys that correspond with the numbers that you wish to enter. For example, press for the number

4.

Section 5: Entering Text 71

72

Section 6: Understanding Your Contacts

Topics Covered

• Opening Contacts Menu

• Adding a Contact

• Adding Pauses

• Contact Groups

• Finding a Contact Entry

• Editing an Existing Contact Entry

• Deleting a Contact Entry

• Storing Numbers After a Call

• Speed Dialing

• My Name Card

• Finding My Phone Number

This section allows you to manage your daily contacts by storing their name and number in your Contacts menu.

Contact entries can be sorted by name, entry, or group.

Section 6: Understanding Your Contacts 73

Opening Contacts Menu

The Contacts menu provides access to powerful features such as adding Groups, creating and sending V-cards, and viewing the phone number assigned to your phone by Verizon Wireless.

1. In standby mode, press MENU. The CONTACTS menu displays.

• New Contact : Add a number, e-mail, or web address to your Contacts.

• Contact List: Find a phone number by Name.

Groups : Add new or rename one of your five default groups.

Speed Dials : Set a speed dial for a contact.

• My Name Card : Create a business card, which can then be sent to others as an attachment

2. Use the navigation key to highlight the CONTACTS sub-menu of your choice, then press .

Contacts Icons

You can assign multiple entries to a contact. The icons in the following table represent all available entry types

Mobile 1 icon. Enter a mobile number for the entry in this field.

Home icon. Enter a home number for the entry in this field.

Work icon. Enter the work number for the entry in this field.

Email 1 icon. Enter an e-mail address for the entry in this field.

74

Adding a Contact

Group icon. Select an available group to associate with the entry in this field.

Ringtone icon. Select a ringtone to associate with the entry in this field.

Mobile 2 icon. Enter a secondary mobile number for the entry in this field.

Fax icon. Enter a fax number for the entry in this field.

Email 2 icon. Enter a secondary e-mail address for the entry in this field.

Notes icon. Enter a note for the entry in this field.

Adding a Contact

When you add information to your Contacts, you can add it as a new entry or as an existing entry.

Method 1

1. In standby mode, press MENU, the CONTACTS menu opens.

2. Press New Contact to enter the contact information.

3. Enter a name for the entry using the keypad.

4. Use the navigation key to highlight the appropriate type

(Mobile1, Home, Work, E-mail, etc.). Once highlighted, use the keypad to enter required information.

5. To assign a Speed Dial location after entering the number, press the right soft key Options. Highlight

Set Speed Dial and press .

Section 6: Understanding Your Contacts 75

Highlight an unassigned location and press SET. A confirmation message appears in the display, Yes is highlighted, press to add the Contact to the speed dial location.

Note: Voicemail is assigned to Speed Dial location 1.

Note: You can assign a speed dial location to each number associated with the contact (Mobile 1, Home, Work, Mobile 2, and Fax).

6. When you’re finished entering information for the entry,

Method 2

You can add new numbers to the Contacts by simply entering the number while the phone is in standby mode, then following the necessary prompts to complete the process.

1. In standby mode, enter the number that you wish to save using the keypad, then press the left soft key Save.

You’re prompted to select from Create New or Update

Existing.

2. Press to enter the number as a Create New, or press

to append the number to Update Existing.

3. If you selected Create New, the following types are available.

Mobile 1

Mobile 2

Home

Work

76

Adding a Contact

• Fax

4. If you selected Update Existing, proceed to step 9.

5. Use the up/down navigation keys to highlight the desired entry type (Mobile 1, Home, Work, etc.) then press .

6. Enter a name for the entry using the keypad. Press the left soft key Abc if you wish to select a different method of text entry, such as Word, Abc, ABC, 123, or

Symbols.

7. To assign a Speed Dial location after entering the number, press the right soft key Options. Highlight

Set Speed Dial and press .

Highlight an unassigned location and press SET. A confirmation message appears in the display, Yes is highlighted, press to add the Contact to the speed dial location.

Note: Voicemail is assigned to Speed Dial location 1.

Note: You can assign a speed dial location to each number associated with the contact (Mobile 1, Home, Work, Mobile 2, and Fax.).

8. When you’re finished entering information for the entry,

9. If you selected Update Existing, the Contact List opens in Search mode. Use the navigation key to browse through entries, or enter the name of the entry using the keypad. Once you’ve highlighted the entry you wish to append the number, press .

Section 6: Understanding Your Contacts 77

10. An Update Existing pop-up screen with a selection list of entry types displays. Use the up or down navigation keys to highlight the desired type then press . The

Edit Contact screen appears in the display with the number added to the selected entry.

11. Press . “Contact Updated” appears in the display.

Adding Pauses

Calls to automated systems often require a password or account number. Instead of manually entering numbers each time, store the numbers to your Contacts along with special characters called pauses.

• Wait : A hard pause stops the calling sequence until further input from you.

• 2-sec pause : A two-second pause stops the calling sequence for two seconds and then automatically sends the remaining digits.

1. In standby mode, enter the number.

Wait or 2-sec Pause and press .

3. Continue with Step 2, Method 2 of Adding a Contact.

Note: Entering multiple two-second pauses extends the length of a pause.

For example, two consecutive two-second pauses cause a total pause time of four seconds. Keep in mind pauses count as digits towards the 48-digit maximum.

78

Contact Groups

Contact Groups

You can place any Contact entry into one of five categories, called “Groups.” Groups allow you to search your Contacts faster, quickly send messages to one or more group members, and more.

Note: By default, new entries to your Contacts are placed into the No Group unless another group is specified.

View Groups

1. In standby mode, press MENU, the CONTACTS menu opens.

display.

No Group

Business

Colleague

Family

Friends

3. Use the navigation key to highlight the desired group, then press to access the group and view its contents.

Move an Entry to Another Group

1. In standby mode, press the right soft key Contacts.

Use the navigation key to highlight the contact you wish to move.

2. Press the left soft key Edit. Use the up/down navigation key to scroll to the Group option.

Section 6: Understanding Your Contacts 79

3. Press the left soft key Set. Choose from the following groups:

• No Group

• Business

• Colleague

• Family

• Friends

4. Use the navigation key to highlight the group containing the entry that you wish to move, then press .

5. Press SAVE . The selection has been saved to the designated group.

Create a New Group

In addition to the five groups already in your phone, you can create additional groups (a maximum of 30). New groups can be named anything you like as long as their names are within the 32-character limit.

1. In standby mode, press MENU, the CONTACTS menu opens.

display.

3. Press the left soft key New. A NEW GROUP pop-up menu displays with the “Enter new name” highlighted.

4. Press SAVE to save. The Groups list now displays the new group added.

Send a Text Message to Members of a Group

Use Send Message in the Group feature to send a message to as many as 10 members of a group at once.

80

Contact Groups

Note: Text messaging availability varies when roaming off the Verizon

Wireless Network.

1. In standby mode, press MENU, the CONTACTS menu opens.

display.

3. Highlight the desired group name and press the right soft key Options.

Highlight Send TXT Msg and press

.

4. Use the down navigation key to highlight the contacts in the group to which you want to send a message. Press

to mark each selection you want to send the message.

Tip: If the selected group contains 10 contacts or less, press the right soft

5. Press the left soft key Done after selecting up to 10 contacts.

Note: You can mark up to 10 members of a group for message distribution. If you try and mark an 11th member, you’ll be notified that

MAXIMUM RECIPIENTS IS 10”.

6. Press the down navigation key to place the cursor in the

Text field.

7. Enter the content of your message using the keypad.

8. To send the text message, press SEND.

Section 6: Understanding Your Contacts 81

Send a PIX/FLIX Msg to Members of a Group

Note: Only available within Verizon Wireless Enhanced Services Area.

1. In standby mode, press MENU, the CONTACTS menu opens.

display.

3. Highlight the desired group name and press the right soft key Options.

Highlight Send PIX/FLIX Msg and press .

4. Use the down navigation key to highlight the contacts in the group to which you want to send a message. Press

MARK to place a checkmark next to each selection to send messages to.

Tip: If the selected group contains 10 contacts or less, press the right soft

5. Press the left soft key Done after selecting up to 10 contacts.

Note: You can mark up to 10 members of a group for message distribution.

If you try and mark an 11th member, you’ll be notified that “MAXIMUM

RECIPIENTS IS 10”.

6. The CREATE PIX/FLIX MSG screen appears. Press the down navigation key to move the cursor into the following entry fields:

Text : Add text to the PIX/FLIX Msg .

PIX/FLIX : Add an image from the PIX or FLIX Gallery to the message.

82

Finding a Contacts Entry

Sound : Add sound to the PIX/FLIX Msg.

Subject : Add a subject to the PIX/FLIX Msg.

Name Card : Attach a Name Card or an entry in your

Contacts to the message.

7. Once you’ve finished adding the desired content to your

PIX Msg, press SEND to send the PIX/FLIX Msg to the intended recipients.

Finding a Contacts Entry

From standby mode, you can quickly open the Contacts list. Contacts is a quick way of viewing entries you’ve stored in the Contacts list.

1. In standby mode, press the right soft key Contacts.

The Contact List displays.

2. In the Search field, enter the first and second letters of the name you wish to search until it is highlighted.

Editing an Existing Contact Entry

1. In standby mode, press MENU, the CONTACTS menu opens.

3. Use the navigation key to highlight the contact list entry and press the left soft key Edit.

4. Use the navigation key to highlight the name, number, email address, or other field that you wish to edit.

5. Press to backspace and delete numbers, text, or symbols.

6. Press and hold to erase all numbers in the highlighted field.

Section 6: Understanding Your Contacts 83

7. Use the keypad to re-enter numbers, text, or symbols.

8. When you’re finished editing the entry, press SAVE.

Your changes are saved.

Deleting a Contact Entry

1. In standby mode, press MENU, the CONTACTS menu opens.

3. Use the navigation key to display the contact list entry and press VIEW.

4. Press the left soft key Erase.

5. A pop-up “ERASE ENTRY?” screen displays.

6. Highlight Yes or No, then press .

Storing Numbers After a Call

Once you’ve finished a call, you can store the number of the caller to your Contact List.

Note: If the call was incoming and Caller ID information was unavailable, then the store option is also unavailable.

1. After you press to end your call, the call time, length of call and phone number appears in the display.

2. Press to open the ALL CALLS list, use the navigation keys to highlight the call whose number you want to save, then press the right soft key Options.

3. Highlight Save and press . You’re prompted to confirm this as a Create New, or Update Existing.

4. Follow the on-screen prompts to designate other information.

84

Speed Dialing

Store a number in standby mode

Store a phone number by entering the number in standby mode, then pressing the left soft key Save. See

“Method 2” on page 76 for more information.

Speed Dialing

Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers stored in your Contact List quicker.

Speed dialing allows you to press and hold a key (or keys) to dial the number associated with those key(s). There are three types of speed dialing; 1-touch, 2-touch, and 3- touch dialing.

Note: Memory location 001 is reserved for voicemail.

1-touch dialing

Call phone numbers assigned to memory locations 002 -

009 by pressing and holding the any of the 2 - 9 keys. For example, to speed dial the number assigned to location 2, press and hold until the name and number appear in the display and the number is dialed.

2-touch dialing

Call phone numbers assigned to keys 010 through 099 by briefly pressing the first key, then pressing and holding the second key. For example, to speed dial the number assigned to 013, briefly press , then press and hold until the number dials.

Section 6: Understanding Your Contacts 85

3-touch dialing

Call phone numbers assigned to memory locations 100 through 999 by briefly pressing the first and second keys, then pressing and holding the third key. For example, to dial location number 113, briefly press , , then press and hold until the number dials.

Assign a speed dial location

1. In standby mode, press MENU, then press

Speed Dials. The Speed Dials screen displays with the first available number highlighted.

2. Use the navigation keys to highlight the number you wish to assign or enter the speed dial location using the keypad, press SET.

3. The SET SPEED DIAL screen displays.

4. Use the navigation keys to highlight the entry you want, then press .

5. At the pop-up screen, use the navigation key to highlight

Yes or No and press .

6. Continue to assign speed dial entries or press the key to return to standby mode.

My Name Card

My Name Card allows you to create a virtual business card. Once completed, you can send the card to recipients as a V-card attachment.

1. In standby mode, press MENU, then press My

Name Card.

2. My Name Card opens with the Name field highlighted.

86

Finding My Phone Number

3. Enter information in each of the fields as desired. Use the navigation key to move between fields, then use the keypad to enter information.

4. When finished, press to save the V-card.

Finding My Phone Number

My Number displays the ten-digit number assigned to your phone.

1. In standby mode, press MENU, then press the right navigation key to SETTINGS & TOOLS.

2. Press .

3. Press . The mobile device, phone number, and mobile identification number are displayed.

Section 6: Understanding Your Contacts 87

88

Section 7: Messaging

Topics Covered

• Types of Messages

• Retrieving New Messages

• Creating and Sending TXT Messages

• Creating and Sending PIX/FLIX Messages

• Receiving PIX/FLIX Messages

• New Sketch Messages

• Message Folders

• Changing Message Settings

• Voicemail

• E-Mail

• Mobile IM

• Chat

This section allows you to send or receive different types of messages. It also includes the features and functionality associated with messaging.

Section 7: Messaging 89

Types of Messages

Your phone is capable of sending email, text, PIX & FLIX, voicemail, sketch, and postcard messages. Send email, text, PIX & FLIX messages by simply entering the email address or the phone number of the recipient in the

To: <.........> or Send To field when creating a new message.

Retrieving New Messages

While text messages from other phones are delivered directly to your phone, PIX/FLIX messages and emails will be stored in the Inbox of the message server and the server will alert you to new messages. Therefore you need to retrieve new messages to your phone and read them on the phone.

Retrieving a Text Message

When you receive a message in standby mode, the message ringer sounds, (unless turned off), and New Text

Msg appears in the display along with the closed envelope icon . The date and time of the message also appear in the display.

key to highlight View Later and press . The message is saved to your inbox where you can view it later.

2. With the message open, press the right soft key

Options to Forward, Reply w/copy, Save Graphic, Save

Sound, Save Quick Text, Save Name Card, Lock, Add To

Contacts or Message Info.

3. With the message open, press REPLY to return a message to the sender.

90

Creating and Sending TXT Messages

4. Press the left soft key Erase to delete message.

Note: When viewing a TXT message, you can view the previous TXT message by pressing the left navigation key and view the next TXT message by pressing the right navigation key.

Creating and Sending TXT Messages

You can send text messages to another mobile phone or to an email address.

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, press

New Msg. Or in standby mode, press the left soft key

Message then press New Msg.

3. Enter the phone number or email address of the recipient.

4. Press the right soft key Options to display a pop-up menu with the options listed.

Entry Mode : Choose from Word, Abc, ABC, 123, Symbols and Shortcuts modes of text entry.

Save As Draft : Save the message to your Draft folder.

Priority Level: Save the message with a High or Normal priority.

Callback # : Provides the ability to send a callback # with the message.

Validity Period : Save the message for the assigned period of time.

Deferred Delivery : Save the message to be delivered at the assigned delivery date and time.

Section 7: Messaging 91

92

• Enh. Delivery Ack : Displays a pop-up screen notifying the message sent has been received.

• Add To Contacts : Save the recipients number to your

Contacts as a new entry or add to an existing entry.

5. Press the left soft key Add to select from the following options:

Contacts : Choose a number from your contacts list.

Groups : Choose a group or a number from your group.

• Recent Calls : Choose a number from the recent calls list.

6. After selecting or entering your recipients in the To field, use the down navigation key, or key to move to the message composer.

7. In the text field, compose your message using the keypad. At any point while composing a message, press the left soft key Abc to change text entry mode and press the right soft key Options to display the following options:

Add: Add information from the following categories.

• Graphics : Lists preloaded and downloaded graphics.

• Animations : Lists preloaded and downloaded animations.

Sounds : Lists preloaded and downloaded sounds.

Quick Text : Choose from up to 12 pre-loaded messages.

You can add 10 additional messages by pressing the right soft key New and erase messages by pressing the left soft

Erase .

• Name Card : Attach My Name Card information or information from one of your Contacts.

• Edit Text Format : Allows you to edit the text size, alignment, style, color, and background color.

• Save As Draft : Save the message to your Draft folder.

Creating and Sending PIX/FLIX Messages

Priority Level: Save the message with a High or Normal priority.

• Callback # : Provides the ability to send a callback # with the message.

• Validity Period : Save the message for the assigned period of time.

• Deferred Delivery : Save the message to be delivered at the assigned delivery date and time.

• Enh. Delivery Ack : Turn message delivery acknowledgement Off or On.

• Add To Contacts : Save the recipients number to your

Contacts as a new entry or add to an existing entry.

8. Use the navigation key to highlight an option. Press to perform the function for the option, or to enter its sub-menu.

9. To send the message, press SEND.

Creating and Sending PIX/FLIX Messages

Note: Only available within Verizon Wireless Enhanced Services Area.

You can add sounds and attach a Name Card or Contact entry to your PIX/FLIX Msg. This is also known as

Multimedia Messaging (MMS).

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, press

New Msg. Or in standby mode, press the left soft key

Message then press New Msg. message.

Section 7: Messaging 93

94

3. Enter the phone number or e-mail address of the recipient (or recipients) using the keypad.

4. Press the right soft key Options to display a pop-up menu that provides the following options:

• Entry Mode : Choose from Word, Abc, ABC, 123, Symbols and Shortcuts modes of text entry.

Preview : Shows the message before it is sent.

Save As Draft : Save the message to your Draft folder.

Priority Level: Save the message with a High or Normal priority.

• Validity Period : Save the message for the assigned period of time.

• Deferred Delivery : Save the message to be delivered at the assigned delivery date and time.

• Add To Contacts : Save the recipients number to your

Contacts as a new entry or add to an existing entry.

5. Press the left soft key Add to select from the following options:

Contacts : Choose a number from your contacts list.

Groups : Choose a group or a number from your group.

Recent Calls : Choose a number from the recent calls list.

To PIX/FLIX Place : Send the message to the PIX Place.

6. Press once you’ve finished entering the phone number(s) or email address(es).

7. In the Text field, compose your message.

8. Press the down navigation key to highlight the PIX/FLIX field.

Creating and Sending PIX/FLIX Messages

9. Press the left soft key My PIX/My FLIX to add a PIX/

FLIX. The MY PIX screen appears in the display.

10. Use the up and down navigation keys to highlight a picture album, and press . An array of pictures appears in the display.

11. Use the up and down navigation keys to highlight a picture, and press to attach the highlighted picture to the message. The CREATE PIX MSG screen appears in the display.

12. Press the up/down navigation key to highlight the Sound field. Press the left soft key Sounds to select a sound.

Press the up/down navigation key to highlight the desired sound and press .

13. Press the down navigation key to highlight the Subject field. Press the left soft key Abc to change entry mode. Press the right soft key Options to Add Quick

Text. Press the up/down navigation key to highlight the desired Quick Text phrase, and press .

14. Press the down navigation key to add Name Card. Press the left soft key Add to select My Name Card or an entry from your Contacts list. Follow the prompts and press to insert.

15. Once all fields are complete, press to send the message to the intended recipient(s).

Section 7: Messaging 95

Receiving PIX/FLIX Messages

When you receive a new PIX/FLIX Msg, NEW PIX/FLIX

MSG appears in the display along with the options View

Now , View Later or Reject.

Note: For the option Reject to appear in the display when you receive a

PIX/FLIX Msg, Auto Receive mode must be set to Off in the Message

Settings menu.

1. When you receive a new PIX/FLIX Msg, press View

Now. Downloading... appears in the display.

2. After downloading, the image (and text if any) contained in the PIX/FLIX Msg appear in the display.

3. Use the navigation keys to scroll through the message or view the entire picture if necessary.

Note: When viewing a PIX/FLIX message, you can view the previous PIX/

FLIX message by pressing the left navigation key and view the next PIX/

FLIX message by pressing the right navigation key.

Receive Messages While in a Call

When you receive a message while in a call, the NEW PIX/

FLIX MESSAGE dialog box appears in the display. Press

to clear. You can view the message without disconnecting your call by pressing Options and then selecting Message.

Note: During a call you can only view the contents of the message. You cannot download any images, or sounds attached to the message.

96

New Sketch Messages

Reject a PIX/FLIX Msg

Note: For the option Reject to appear in the display when you receive a

PIX/FLIX Msg, Auto Receive mode must be set to Off in the Message

Settings menu. See “Changing Message Settings” on page 103 for more

information.

This feature is currently unavailable outside of the United States.

1. When you get notification to view a new PIX/FLIX Msg that you don’t want to receive, press the down navigation key to highlight Reject.

2. Press to reject.

View a PIX/FLIX Msg Later

1. When you receive a new PIX/FLIX Msg that you would like to view later, highlight View Later and press .

2. To view the message, press the left soft key

Message, Inbox.

3. Use the navigation key to highlight the unopened message, then press OPEN. The MESSAGE INFO screen appears first if the Auto Receive option is Off. If so, press DOWNLOAD to view PIX/FLIX message.

New Sketch Messages

You can convert a picture to a black and white sketch drawing that can be sent with a message. For information

on taking a picture see “Take PIX” on page 155. For

information on sending the message, see “Creating and

Sending PIX/FLIX Messages” on page 93.

Section 7: Messaging 97

Message Folders

Your phone provides default message folders for your

Text and PIX/FLIX messages.

Note: To quickly view all messages in the Inbox, Sent, or Drafts folders, open one message and then press the right navigation key to view the next message or press the left navigation key to view the previous message.

Inbox

Received messages of all types are stored in the Inbox folder.

1. In standby mode, press the left soft key Message then press Inbox. Or in standby mode, press

MENU and use the left navigation key to highlight

MESSAGING then press Inbox.

2. Use the navigation key to highlight the message that you wish to view.

message.

4. While viewing a message press the right soft key

Options to display the options listed.

• Forward : Forward the message to another recipient.

• Play Again : Replays a PIX/FLIX message.

Reply w/copy: Attaches the content of the message you are replying to.

• Save PIX/FLIX : Saves the picture sent in a PIX/FLIX message to My PIX or My FLIX .

• Save Sound : Saves the sound received with the message.

98

Message Folders

• Save Quick Text : Saves the text received in the message to the Quick Text list.

• Save Name Card : Saves the name card received in the message.

• Lock/Unlock : Locks the message to prevent deletion.

• Add To Contacts : Save the number of the sender to your

Contacts as a new entry or add to an existing entry.

• Message Info : Provides the following information: From and

Callback Number, Priority, Msg Type, Size and if a Graphic,

Sound or Name Card were included in the message.

5. From the Inbox menu, press the left soft key Erase to delete the message from the Inbox. Highlight Yes to delete, or No to return to the Inbox menu.

6.

Press the REPLY key to return a message to the sender.

Note: When Auto Erase is turned on, the oldest read TXT message is replaced by an incoming TXT message when 50 TXT messages are stored in the Inbox, and the oldest read PIX/FLIX message is replaced by an incoming PIX/FLIX message when available memory is filled with PIX/FLIX

messages. See "Changing Message Settings" on page 103 for information

on how to set Auto Erase and Auto Receive.

Sent

Your phone stores messages in the Sent folder, regardless of whether the message was successfully transmitted.

Verify if and when a message or e-mail was successfully transmitted by enabling the Enh. Delivery Ack feature in

Message Settings.

Section 7: Messaging 99

Review Messages in the Sent Folder

1. In standby mode, press the left soft key Message then press Sent. Or in standby mode, press

MENU and use the left navigation key to highlight

MESSAGING then press Sent.

2. Use the navigation key to highlight the message that you wish to review, then press OPEN.

3. While viewing the message, press the right soft key

Options to display the options listed.

Play Again : Replays a PIX/FLIX message.

Forward: Forwards the message to another recipient.

• Resend: Sends the message again to the original recipient.

• Lock/Unlock : Locks the message to prevent deletion.

• Save Quick Text

Quick Text list.

: Saves the text sent in the message to the

Add To Contacts : Adds the sender’s information to your contact list.

Erase Sent : Erases this message from the Sent folder.

• Message Info : Provides the following information: TO

Number, Priority, Msg Type, Size and if a Graphic, Sound or

Name Card were included in the message.

4. Use the navigation key to highlight the desired option.

5. Press to perform the function for the highlighted option.

100 again.

7. From the Sent menu, press the left soft key Erase to delete the message from the Sent folder. Highlight Yes to delete, or No to return to the Sent menu.

Message Folders

Drafts

Draft messages are those that have been composed but never sent. You can return to the Drafts folder at any time to view, edit, or send a draft message.

Create a Draft Text Message

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, press

New Msg. Or in standby mode, press the left soft key

Message then press New Msg.

2. Select the type of message you want to create.

3. Enter the phone number of the recipient, then press the down navigation key.

4. Compose your message using the keypad, then press the right soft key Options. A pop-up menu appears in the display.

5. Scroll down with the navigation key until Save As Draft is highlighted, then press . A confirmation message appears in the display and your message is saved to the

Drafts folder.

View and Edit Draft Messages

1. In standby mode, press the left soft key Message then press Drafts. Or in standby mode, press

MENU and use the left navigation key to highlight

MESSAGING then press Drafts.

2. Use the navigation key to highlight the message that you wish to view, then press EDIT. The message opens in the Text field with the message text displayed.

Section 7: Messaging 101

102

3. Press the CLR key to backspace and delete any current characters in the display, if desired. Press and hold to erase all characters in the field.

4. Press the right soft key Options. A pop-up menu appears in the display with the options listed.

• Preview : Plays a PIX/FLIX message.

Add: Add information from the following categories.

Graphics : Lists all graphics pre-loaded and downloaded.

Animations : Lists all animations pre-loaded and downloaded.

• Sounds : Lists all sounds pre-loaded and downloaded.

• Quick Text : Choose from up to 12 pre-loaded messages.

• Name Card : Allows you to add your name card or the name card of one of your contacts.

• Add Quick Text : Choose from up to 12 pre-loaded messages.

• Edit Text Format : Allows you to edit the text size, alignment, style, color, and background color.

• Save As Draft : Save the message to your Draft folder.

Priority Level: Save the message with a High or Normal priority.

• Callback # : Provides the ability to send a callback # when sending a message.

• Validity Period : Save the message for the assigned period of time.

• Deferred Delivery : Save the message to be delivered at the assigned delivery date and time.

• Enh. Delivery Ack : Displays a pop-up screen notifying the message sent has been received.

Changing Message Settings

Add To Contacts: Save the recipient’s number to your

Contacts as a new entry or add to an existing entry.

5. Use the navigation key to highlight the desired option.

Press to perform the function for the highlighted option.

6. Once you’ve returned to the message composer, press

to send the message, if desired.

Erase Options

You can erase unlocked messages in your Inbox, Drafts folder, or Sent folder. Locked messages are not erased.

To erase messages:

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, then press the right soft key Options.

2. The following options are available:

Erase Inbox : Erases unlocked messages in your Inbox.

Erase Drafts : Erases unlocked messages in your Drafts folder.

Erase Sent : Erases unlocked messages in your Sent folder.

Erase All : Erases unlocked messages in all message folders

(Inbox, Drafts and Sent).

Changing Message Settings

This menu allows you to define settings for messages sent or received on your phone. To access your message settings, use the following steps:

Section 7: Messaging 103

104

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, then press the left soft key Settings. Or press the left soft key

Message and press the left soft key Settings.

2. Select the message type you would like to change and press . Choose from the following options:

All Msg: Allows you make a broadcast change to all message settings.

• Auto Save : Saves all messages sent. Use the navigation keys to select On, Off, or Prompt.

• Auto Erase : Erases the oldest message of the same type

(TXT or PIX/FLIX) when the maximum number of received messages of that type is exceeded in the Inbox. For example, the oldest read TXT message is replaced by an incoming TXT message when 50 TXT messages are stored in the Inbox, and the oldest read PIX/FLIX message is replaced by an incoming PIX/FLIX message when 10 PIX/FLIX messages are stored in the Inbox.

Choose from On or Off.

• Quick Text : Displays the Quick Text pre-defined entries for

Text Msg and PIX/FLIX Msg. Press the right soft key New to add to the Quick Text list. Enter your new text and press

. The new Quick Text item shows in the first position of the list.

• Voicemail # : Enter the speed dial entry set for your voicemail.

• Entry Mode : Sets the default entry mode for messaging.

Choose from Word, Abc, ABC, or 123.

• Callback # : Displays the callback number in the text message. Choose from On or Off.

• Signature : Adds the signature text to each message sent.

Choose from None or Custom.

TXT Msg: Allows you to customize Text Message settings.

Voicemail

Auto View : Automatically displays the text message when received. Choose from On or Off.

Signature : Adds the signature text to each message sent.

Choose from None or Custom.

Text Auto Scroll: When enabled, advances body text automatically one line at a time.

PIX-FLIX Msg: Allows you to customize PIX-FLIX Message. settings.

Auto Receive : Automatically receives messages into your

Inbox. Choose from On or Off.

Signature : Adds the signature text to each message sent.

Choose from None or Custom.

Voicemail

New voicemail alerts are sent via an SMS text message.

These messages indicate how many new and urgent voicemails are in your voicemail box. Open the text message to view the number of new voice messages in your voicemail. If a caller leaves a callback number, this number will also be sent via an SMS text message.

Receive Voicemail Messages

When you receive a new voicemail message you’ll hear a sound and a “NEW VOICEMAILS” message and the

Voicemail icon appear in the display. You are also prompted to listed to your voicemail message(s).

1. Press the up/down navigation keys to select Listen Now or Listen Later.

2. Press .

Section 7: Messaging 105

View Voicemail Messages in the Voicemail Folder

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, press

Voicemail. Or press the left soft key Message and press Voicemail. message(s).

E-Mail

This menu allows you to send and receive E-Mail using

Mobile Web. To use your E-Mail, follow these steps:

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, then press

E-Mail. Or press the left soft key Message and

2. Using the up and down navigation keys, select one of the following E-Mail providers and press .

• MSN Hotmail

• AOL Mail

• Yahoo! Mail

• Find More

3. Use the on-screen application specific functions and options to use the E-Mail applications.

106

Mobile IM

Mobile IM

The Instant Messaging function allows you to send and receive instant messages using one of the following communities:

• AOL

®

Instant Messenger TM

• MSN

®

Messenger Service

• Yahoo!

®

Messenger

Note: You must first create the Instant Message account before accessing it on your phone.

Using Mobile IM

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, then press

Mobile IM. Or press the left soft key Message and press Mobile IM.

2. Highlight Mobile IM and press .

3. Select your instant message community using the left and right navigation keys and press .

4. Use the on-screen application specific functions and options to use the instant message applications.

Chat

You have the ability to join wireless chat rooms from your phone. Send messages including text and icons to many chat room participants or launch one-on-one (private) chat rooms.

Section 7: Messaging 107

To access a chat room from the browser:

1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, then press

Chat. Or press the left soft key Message and

2. Mobile Web is launched. Using the up and down navigation keys, select one of the following chat rooms and press .

• UPOC CHAT

• LAVALIFE

• FRIENDZ

• LIFESTYLE

• POWER CHAT

• FIND MORE

3. Use the on-screen application specific functions and options to use the Chat applications.

108

Section 8: Changing Your Settings

Topics Covered

• My Account

• Tools

• Sounds Settings

• Display Settings

• Phone Settings

• Call Settings

• Bluetooth Settings

• Memory

• Phone Info

This section explains the sound and phone settings for your phone. It includes display settings, security settings, Bluetooth settings, call settings, and other settings associated with your phone.

Section 8: Changing Your Settings 109

My Account

The My Account menu connects to the VZW Mobile

Web. You can setup Favorites or choose from the available applications.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. display.

2. Use the navigation keys to make your selection and press . Follow the on-screen instructions.

Tools

The Tools menu provides the ability to access the following menus:

Voice Commands: For more information see, "VoiceSignal™" on page 39.

Calculator: For more information see, "Calculator" on page

172.

Calendar: For more information see, "Calendar" on page 174.

Alarm Clock: For more information see, "Alarm Clock" on page

177.

World Clock: For more information see, "World Clock" on page

179.

Stop Watch: For more information see, "Stop Watch" on page

180.

Notepad: For more information see, "Notepad" on page 180.

110

Sounds Settings

Sounds Settings

The Sounds menu provides the ability to access the following menus:

Master Volume

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display.

2. Press

Master Volume.

3. Use the Up and Down navigation keys to adjust the volume. Press the left soft key Play soft key to hear the volume.

4. Press SET to save.

Call Sounds

Ringer Settings

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display.

2. Press

Call Sounds. Press

Available options are:

Call Ringtone.

• My Ringtones: You can get new ringtones from the web or choose from the list.

• My Sounds: You can record new sounds to use or choose from the list.

• My FLIX: You can choose a FLIX to play when you received a call.

Section 8: Changing Your Settings 111

4. Press to save the setting. The phone returns to the

Call Sounds menu.

Alert Sounds

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display.

2. Press

Alert Sounds. For the following options, you can set the tone for the message alerts. You can also set vibration on and set a reminder.

• TXT Message

• PIX-FLIX Msg

• Voicemail Msg

• Device Connect

Keypad Volume

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display.

2. Press

Keypad Volume.

3. Use the Up and Down navigation keys to adjust the keypad volume.

4. Press SET to save.

112

Sounds Settings

Earpiece Volume

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display.

2. Press

Earpiece Volume.

3. Use the Up and Down navigation keys to adjust the earpiece volume.

4. Press SET to save.

Service Alerts

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display.

2. Press

Service Alerts. For the following options, you can the Service Alert On or Off.

• ERI

• Minute Beep

• Call Connect

Power On/Off

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display.

2. Press

Power On/Off.

Section 8: Changing Your Settings 113

3. Press to save your selection.

Display Settings

The Display menu affects the menu style, standby mode animation, backlight settings, and more.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display.

• Banner : Create your own personalized greeting that appears in the display when your phone is in standby mode or choose the ERI Banner which displays the network in which you have subscribed.

• Backlight : Choose settings for the LCD or Keypad.

• Wallpaper : Choose PIX (Pre-loaded or personal) or FLIX to use as the background display for your Main Screen and PIX

(Pre-loaded or personal) to use as the background display for the Front Screen.

• Display Themes : Choose from 6 preset colors used for

• menu display.

Clock Format : Choose digital or analog format for time display.

• Dialing Font: Choose a dialing font size and style.

2. Use the navigation key to highlight the display menu that you wish to edit, then press .

3. Use the navigation key to select from the menu options that appear in the display, then press . Your settings are saved.

114

Display Settings

Banner

Banner allows you to create your own personalized greeting that appears in the display while your phone is in standby mode. Or you can display the network to which you are subscribed.

To create a personal banner:

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display. Press Banner. your handset.

Note: Press and hold to erase an existing banner, if necessary.

3. Enter a word or short phrase (18 characters or less) to appear in your phone’s display when the phone is in standby mode.

4. Press to save the new banner.

To create an ERI banner:

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display. Press Banner.

2. Press to set the ERI Banner for your handset.

3. Select On or Off and press to save the new setting.

Section 8: Changing Your Settings 115

Backlight

Set the backlight for the display or keypad to remain on for a specified period of time or to remain on as long as the flip is open.

Note: Prolonged backlight use drains your battery faster.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display. Press Backlight. The menus listed appear in the display.

• Display : The following options are for the Main LCD.

• Duration : Can be set to 7 seconds, 15 seconds, 30 seconds,

Always On, or Always Off.

• Brightness : Use the Navigation keys to adjust the brightness.

• Keypad : The following options are for the keypad.

7 Seconds : The backlight is on for 7 seconds.

15 Seconds : The backlight is on for 15 seconds.

• 30 Seconds : The backlight is on for 30 seconds.

Always On : The backlight is always on.

Always Off : The backlight is always off.

2. Use the navigation key to highlight a menu.

3. Press to enter the highlighted option’s menu and change settings as desired.

116

Display Settings

Wallpaper

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display. Press Wallpaper.

Main Screen and Front Screen appear in the display.

2. Use the navigation key to highlight Main Screen or

Front Screen, then press . Choose from the following options:

• If you select Main Screen choose My PIX or My FLIX and press .

• If you select Front Screen choose My PIX and press .

3. Use the navigation key to highlight your selection, the press to select the wallpaper that will appear in the main LCD display while your phone is in standby mode.

Display Themes

Choose from 6 preset colors used for menu display.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display. Press Display

Theme.

2. Use the navigation keys to select the Display Theme you wish, then press .

Section 8: Changing Your Settings 117

Clock Format

This menu allows you to have time displayed in digital or analog format.

Main Clock (Main LCD): Set to Digital, Analog, or Off

Front Clock (External LCD): Set to Digital or Analog.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display. Press Clock

Format. The following Clock Format menus are listed in the display:

Main Clock

Front Clock

2. Use the navigation keys to highlight the desired menu and press .

3. The following options appear in the display. Highlight one of the following options and press to save.

• Digital: Time appears in digital format, for example,

12:54pm.

• Analog : Time appears in clock format. Digital format is still present in the display.

• Off : No time is displayed.

Dialing Font

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. menus are listed in the display. Press Dialing Font.

118

Phone Settings

2. The following options appear in the display:

• Size: allows you to select the font size.

Style: numbers appear in selected font style when dialing a number.

3. Use the navigation keys to select Style, then press .

4. Use the navigation keys to select a font style and press

.

Phone Settings

The Phone Settings menu provides the ability to access the following menus:

Standalone Mode

With Standalone Mode on, all send and receive radio functions for your phone are disabled, and you cannot use your phone to place or receive calls.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display.

2. Press Standalone Mode. Use the Up or Down navigation key to select On or Off and press .

Shortcut Key

Shortcut Key allows you to select from up to 21 applications that appear in the display when you press the down navigation key in standby mode.

Section 8: Changing Your Settings 119

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display. Press Shortcut Key.

2. Use the navigation key to select the menu item shortcut of your choice, then press .

Language

Change the display language from English to Spanish using the Language menu.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display. Press Language.

2. Use the navigation key to select the language of your choice, then press .

Location

Note: This feature is only available on the Verizon Wireless network.

The Location (GPS) setting identifies your location to the network. You can fully enable this setting or set GPS to work only in the case that you dial 911 from your phone.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display.

2. Press

Location. The Location screen displays.

120

Phone Settings

Location On : GPS location setting is on wherever the feature is available.

E911 Only : GPS location setting is on whenever you dial 911 only.

3. Use the navigation key to highlight an option.

4. Press to select the highlighted setting.

Security

The Security menu allows you to lock your phone, set restrictions, and other security options.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS.

2. Use the navigation key to highlight Security, press .

3. Enter the lock code (factory settings are the last four digits of your telephone number). The following options display:

Common Code: Common code On, uses a common password for both device and location lock code. Common code Off, uses separate passwords for both device and location.

Lock Mode: Allows you to lock the Device or Location.

Edit Code: Allows you to change the Lock Code for the

Device or Location.

Reset Phone: All settings (except Contacts) are reset to factory default settings.

Erase Phonebook: Allows you to erase the phonebook.

Section 8: Changing Your Settings 121

Lock Phone

Lock Phone restricts the use of your phone with the exception of outgoing calls to 911. Lock Phone allows you to answer calls, but to place calls (except to emergency numbers) you have to unlock the phone.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display. Press Security. You’re prompted to enter the lock code. The default lock code is the last four digits of your telephone number.

2. Enter the Lock Code. Several security menus appear in the display.

highlight Device or Location. Press . The following options display:

• Lock: Your phone returns to standby mode. The the Lock Code is required immediately to access any functions.

Unlock: If locked, unlocks the device or phone, depending on your selection.

• On Power Up : The Lock Code is required whenever you power up the phone.

Note: The On Power Up option is not an available in the Location sub-menu.

4. Press to perform the function for the highlighted option.

122

Phone Settings

Edit Lock Code

The default lock code is the last four digits of your phone number. Edit Code allows you to change this code to a lock code of your preference.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display. code. The default lock code is the last four digits of your telephone number.

and Location. Use the navigation keys to highlight your choice and press .

4. At the “ENTER NEW LOCK CODE” or “ENTER NEW

LOCATION LOCK CODE” prompt, enter the new lock code.

5. At the “CONFIRM LOCK CODE” prompt, enter the new lock code.

6. DEVICE CODE SET” or “LOCATION LOCK CODE SET” message appears in the display confirming that your lock code has been changed.

Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the lock code, be sure to write down or memorize the new code.

Section 8: Changing Your Settings 123

Resetting Your Phone

Reset Phone returns all setup options to their factory default.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display.

2. Press Security, and enter the lock code. Press

Reset Phone. A prompt appears in the display asking if you wish to restore default settings (except for the

Contacts).

3. Press Yes to restore default settings or press No to return to the Security list .

Erase Phonebook

Erase Phonebook allows you to erase the phonebook.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display.

2. Press Security, and enter the lock code. Press

Erase Phonebook. A prompt appears in the display

“DELETE ENTIRE PHONEBOOK”. Use the navigation key to highlight Yes and press .

Emergency #

Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted. If you call 911 an audible tone is heard and an emergency prompt appears in the display for the duration of the call.

124

Phone Settings

Remember to always turn your phone on and check for adequate signal strength before placing a call.

Call Emergency Numbers in Lock Mode

In Lock Mode, you can dial 911 to place an emergency call.

Note: If you dial 911, your phone dials the emergency number immediately (no prompt).

System Select

The System Select menu allows you to set your roaming options. For information on roaming options, see

"Roaming Options" on page 37.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display.

in the display:

• Home Only

• Automatic-A

• Automatic-B

3. Make your selection and press .

NAM Selection

Your phone provides the option of selecting between two NAMs (Number Assignment Modules) or phone numbers. Select either NAM1 or NAM2.

Section 8: Changing Your Settings 125

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display.

in the display:

• NAM1

• NAM2

3. Make your selection and press .

PC Connection

PC Connection allows you to select how you want your a990 to connect to your PC. Choose either USB, or

Bluetooth and press . Select No Connection to disable PC Connection.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display.

in the display:

• USB

• Bluetooth

3. Make your selection and press .

Quick Search

Quick Search is an easy way to locate contacts in your

Address Book and Menu items.

126

Phone Settings

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. are listed in the display. in the display:

• Off

• On

3. Make your selection and press .

Searching for a Contact

1. In standby mode, press the first few numeric keys that correspond to the letters of the contact’s name.

For example, to search for “Sally” you would enter

S A L L Y

2. Press the Up navigation key. The contact name is highlighted.

3. Press the key to call the contact.

Searching for a Menu Item

1. In standby mode, press the first few numeric keys that correspond to the letters of the Menu item name.

For example, to search for “Inbox” you would enter

Section 8: Changing Your Settings 127

I N B O X

2. Press the Down navigation key. The menu item is highlighted.

3. Press the key to access the content of the menu item.

Call Settings

The Call Settings menu allows you to select the method for answering incoming calls, setting redial options, setting data rates for data calls, voice privacy, and more.

Answer Options

The Answer Options menu allows you to select the method for answering incoming calls.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. listed in the display.

2. Press

Answer Options. The following options appear in the display:

Flip Open: Calls are answered when the flip is opened.

Any Key: Calls are answered when any key is pressed.

Send Only: Calls are answered when the key is pressed.

Auto Answer: Calls are answered automatically with a 1, 3 or 5 second delay.

128

Call Settings

3. Use the navigation key to highlight the method you wish to use for answering calls, then press .

Auto Retry

Auto Retry automatically redials busy numbers after a preset period of time.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. listed in the display.

2. Press

Auto Retry. The following options appear in the display:

• Off

• Every 10 Seconds

• Every 30 Seconds

• Every 60 Seconds

3. Highlight an option and press , or press to return to the Call Settings menu without making a selection.

TTY Mode

Before you can use your phone with a TTY device, you’ll need to enable TTY functions in the phone. See

"TTY" on page 38 for more information.

One Touch Dial

You can use this option to enable or disable the speed dialing feature.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS.

Section 8: Changing Your Settings 129

listed in the display.

2. Press

One Touch Dial. Select On or Off. Press

OK to save.

See "Speed Dialing" on page 85 for more information.

Voice Privacy

Note: This feature is only available on the Verizon Wireless network.

Voice Privacy (at the Enhanced setting) allows you to prevent those you call from seeing your number in their display when receiving your call. Voice privacy options are Standard and Enhanced.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. listed in the display. display. Standard and Enhanced appear in the display.

3. Use the navigation key to highlight the Voice Privacy option of your choice, then press . Your settings are saved.

Call Restrictions

Call Restriction allows you to restrict outgoing and incoming calls. You can also restrict access to your

Contacts list.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS.

130

Call Settings listed in the display.

3. Use the navigation key to select Outgoing, Incoming, or

Contacts, then press .

4. Use the navigation key to highlight On or Off, then press

. Your settings are saved.

Data Settings

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. listed in the display.

2. Press

Data Settings. The following options appear in the display. Highlight one of the following options and press .

Data Off: Phone operates in normal voice call mode.

Data For Next Call : Data call is enabled for next call only.

Phone will reset to Data Off mode after call.

Data Until Powered Off : Phone will remain in Data Mode until phone is powered off.

DTMF Tones

Use this menu to set DTMF settings to Normal, or

Long.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. listed in the display.

Section 8: Changing Your Settings 131

the display:

• Normal

• Long

3. Make your selection and press .

Ringer ID

The Ringer ID menu allows you to set the Ringer ID option to On so that you can associate different

ringtones with different numbers. See "Get Tunes &

Tones" on page 141 for more information.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. listed in the display. the display:

• On

• Off

3. Make your selection and press .

Picture ID

The Picture ID menu allows you to set the Picture ID option to On so that you can associate a picture with a

Contact. See "Get PIX & FLIX" on page 151 for more

information.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. listed in the display.

132

Bluetooth Settings the display:

• On

• Off

3. Make your selection and press .

Bluetooth Settings

About Bluetooth

Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection.

Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a range of one another, you can exchange information between them, even if they are located in different rooms.

Note: For optimal user experience when using the Bluetooth earpiece, enable the Key/EarMic option in the Voice Commands Voice Dial menu.

This will allow you to place calls with a Bluetooth earpiece using the Voice

Dial feature in hands-free mode.

Bluetooth Service Profiles

Actually, the Bluetooth specification is a protocol that describes how the short-range wireless technology works, whereas individual profiles describe the services supported by individual devices. Profiles reduce the chance that different devices will not work together.

Section 8: Changing Your Settings 133

Your phone supports the following profile:

• HSP: Mono-headset Profile*

• HFP: Hands Free Protocol

• SPP: Serial Port Profile

• DUN: Dial Up Network Profile

• BPP: Basic Print Profile

* For vehicle/accessory compatibility, go to www.verizonwireless.com/bluetoothchart

Phone does not support all Bluetooth OBEX profiles.

The following Bluetooth options are available:

On/Off

When the Bluetooth radio is turned on, you can use the

Bluetooth features available. When the Bluetooth radio is turned off, you cannot send or receive information via Bluetooth. To save battery life or in situations where radio use is prohibited, such as airline traveling, you can turn off the Bluetooth wireless technology.

1. In standby mode, press MENU key and use the right navigation key to highlight SETTINGS & TOOLS. the display.

2. Press to turn Bluetooth On or Off.

Note: If activated, the Bluetooth icon displays.

Search

This option searches for a recognized Bluetooth wireless technology device.

134

Bluetooth Settings

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. the display.

2. Add New Device is highlighted, press .

Note: If you have NOT already activated Bluetooth on the phone, the message “TURN BLUETOOTH ON?” displays. Highlight Yes to activate or

No to exit and press .

3. A list of found Bluetooth devices will be displayed. Use the Up and Down navigation keys to highlight a

Bluetooth device. Press to pair the devices.

4. Enter the passkey (0000 for most devices) and press to pair with the device you selected.

Bluetooth Settings

The Bluetooth wireless technology settings menu provides the ability to view and change the device name, show the visibility, and set the security for the device.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. the display.

2. Press Settings. The Bluetooth menu displays with the following options:

My Phone Name: allows you enter a customized name.

• Discovery Mode : allows other users to see your accessibility. Select On for other devices to see your device, or

Section 8: Changing Your Settings 135

Off for no visibility. (For more information, refer to your

Bluetooth device documentation.)

• My Phone Info : shows the handset information.

Note: When a Bluetooth headset is paired with the phone, the button on the

Bluetooth headset will launch VoiceSignal voice recognition over the

Bluetooth link.

Also, VoiceSignal will use the Bluetooth headset to play prompts and record speech.

Memory

The Manage Memory menu allows you to set your

Save Options to Phone Memory or Card Memory. You can also set the memory usage for pictures, videos, music, sounds, and ringtones on your phone and microSD™ card.

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. display. The following options are available:

• Save Options : You can set your PIX, FLIX, or Sounds to be saved to either phone memory or card memory.

Phone Memory: Allows you to see memory usage of everything stored on your phone.

Card Memory: Allows you to see memory usage of everything stored on your microSD™ card.

Phone Info

The Phone Info menu allows you to view the software and hardware information, your assigned number, and an icon glossary for your phone.

136

Phone Info

1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. in the display.

2. My Number is highlighted. Press to display the

Mobile Device and Identification numbers.

Browser, Get it Now, and Hardware versions available on your phone.

brief description.

5. Press to return.

Section 8: Changing Your Settings 137

138

Section 9: Multimedia

Topics Covered

• Get It Now

• Get Tunes & Tones

• Get PIX & FLIX

• Printing Pictures Using PictBridge

• Get Fun & Games

• Get News & Info

• Get Going

• Get Extras

This section describes how you receive tunes, tones, images, games, news and information. You can also take and send pictures and video from your phone.

Section 9: Multimedia 139

Get It Now

The Get It Now menu provides sub-menus to GetTunes

& Tones, Get PIX & FLIX, Get Fun & Games, Get News

& Info, Get Going and Get Extras. You can also view memory info to see how much space you’ve used (and have left) for stored media. Use the following steps for each GET IT NOW sub-menu.

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Press the right soft key Info.

Note: you can directly access the GET IT NOW menu by pressing the right navigation key while in standby mode.

available. Press the key to return.

for the following items. Press the key to return.

• My Ringtone

• My Music

• My Sound

• My Pix

• My Flix

• Applications

• PIX/FLIX Msg the key to return.

140

Get Tunes & Tones questions. Use the navigation key to highlight an item and press to display help text. Press the key to return.

Get Tunes & Tones

This menu allows you to get new tunes and tones, record new sounds, and set tunes and tones as your ringtone. It also allows you to access your music files.

Get V CAST Music

You can use the Get V CAST Music option to download music from the V CAST Music catalog directly to phone memory or to a removable memory card. Before downloading music to your microSD™ memory card, be sure to format it as described below.

Formatting Your microSD™ Card Using Your Handset

1. Insert your card into the microSD card slot located on the left side of the phone.

2. In standby mode, press MENU, then press the right navigation key to SETTINGS & TOOLS.

5. Press the right soft key Options.

6. Format Card is highlighted, press to format card.

Formatting Your microSD™ Card Using Your PC

For best playback of songs stored to the microSD™ memory card, you should reformat your memory card with PC format FAT32.

Section 9: Multimedia 141

Note: Any contents currently stored on the microSD™ memory card will be lost after this procedure is performed.

1. Insert the microSD™ memory card into an SD card adapter.

2. Insert the SD card adapter into the SD card reader slot.

3. Plug the SD card reader into a USB port on your PC.

4. On your PC, go to your My Computer directory and highlight the drive that represents the SD card reader.

5. Right click and select the Format option.

6. Under the File System option, select FAT32 and click the

Start button.

7. Your microSD™ memory card will be reformatted.

8. Remove the microSD™ card from the SD card reader and insert it back into your phone. The My Music directory will automatically be created on the microSD™ memory card the first time you insert it into the phone.

Downloading Music from the V CAST Music Catalog

1. In standby mode, press the Menu, use the left navigation key to highlight Get It Now. The Get

Tunes & Tones menu is highlighted, press .

catalog.

3. Browse or search the catalog to preview the songs you want.

4. Highlight the music (song or album) that you want to purchase. Press BUY to purchase.

142

Get Tunes & Tones

5. The CONFIRM PURCHASE screen will display the price and items you selected to purchase. Press BUY to accept the terms.

6. You’ll receive confirmation that your purchase was successful and your music is available for download.

Press to continue.

7. Highlight Phone Memory or Memory Card for storage location (Memory Card is recommended). Press to begin downloading. Wait for the phone to acquire the content license. Press when download is complete.

immediately.

Or, You can press the left soft key Library to go to your Music Library of downloaded songs and albums.

See "Manage Music" on page 148 for more information.

9. To return to standby mode, press the key.

Get New Ringtones

You can use this option to download new ringtones from the Internet.

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get

Tunes & Tones menu is highlighted, press .

2. Highlight .

3. Highlight .

4. You are connected to the web server and presented with available provider ringtone applications.

5. To return to standby mode, press the key.

Section 9: Multimedia 143

My Ringtones

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get

Tunes & Tones menu is highlighted, press . The GET

TUNES & TONES menu appears in the display.

2. Highlight .

download new ringtones. Or if you have already downloaded ringtones, highlight your selection and press

.

4. To return to standby mode, press the key.

My Music

The Music Player can be used to play music files that you have downloaded from the V CAST Music catalog or that you have transferred from your PC using Sync

Music.

You can play your music with the flip open or closed.

Playing Music with the Flip Closed

The external keys which you will use are labeled below.

144

Get Tunes & Tones

1. In standby mode, with your flip closed, press the Play/

Pause ( ) key. If you have already downloaded music to your phone or memory card, Play All will be displayed as well as any playlists that you have created.

Note: To create a playlist, see “Creating a Playlist” on page 150 for more

information.

2. To scroll through the list, press the up/down navigation key until the playlist that you want is highlighted. Or, highlight Play All if you want to play all of your songs.

3. Press the Play/Pause ( ) key to play the songs you have selected.

4. You can use the Fast Forward ( ) and Rewind ( ) keys to skip to another song track. Press and hold the

Fast Forward ( ) and Rewind ( ) keys to forward or rewind the current song.

Playing Music with the Flip Open

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get

Tunes & Tones menu is highlighted, press .

2. Highlight .

3. The Music Player opens with a list of music files that have been downloaded or transferred to internal phone memory or to the microSD™ memory card. The

Get V CAST Music option is also shown. See “Get V

CAST Music” on page 141 for more information.

Section 9: Multimedia 145

4. Scroll down to a song and press the right soft key

Options, to select from the following options:

• Move : Moves the song from the microSD™ memory card to the phone, or vice-versa, depending upon where it is currently stored.

• Lock : Allows you to lock the song so that it will not be deleted.

This option may not be available for all songs.

• Erase : Erases the selected file.

• Erase All : Erases all files.

• Song Info: Displays title, artist, album title, genre, copyright year, distributor, duration, and track number if available.

5. Press the up/down navigation keys to highlight the song you want to listen to and press PLAY to play the song. Or, press the left soft key Playlist to see a list of your playlists.

6. During song playback, press the right soft key

Options to switch to one of the following functions:

• Play All : Selects all songs for playback.

• Shuffle : Re-sorts the current playlist order.

• Get V CAST Music : Connects you to the V CAST Music catalog to download more songs.

7. During song playback, press the right navigation key to advance to the next song track in the current playlist, or press the left navigation key to skip to the previous song track.

My Sounds

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get

Tunes & Tones menu is highlighted, press .

2. Highlight .

146

Get Tunes & Tones

3. Record New is highlighted. Press to launch the

RECORD NEW screen.

4. Press STOP to stop and save the recording. Press the left soft key

Pause to pause and resume the recording appropriately.

Sync Music

This option allows you to transfer music files from your PC. In order to use this option, you must load

Windows Media TM Player 10 on your PC. Windows

Media TM Player 10 is only compatible with Windows

XP ® operating systems.

For setup of Windows Media TM Player 10, refer to the following resources:

• To download the Windows Media TM Player 10:

http://www.microsoft.com/windows/windowsmedia/mp10/ default.aspx

• Tips on getting started: www.microsoft.com/windows/windowsmedia/mp10/ usingplayer.aspx

• Common questions: http://www.microsoft.com/windows/windowsmedia/mp10/ troubleshooting.aspx

• Troubleshooting error messages: http://www.microsoft.com/windows/windowsmedia/mp10/ errors.aspx

Note: The file name is limited to 36.3 characters (thirty-six to left of “.”, three to right of “.”)

Only songs with English or Spanish filenames can be successfully transferred to the phone for play back.

Section 9: Multimedia 147

Note: Before transferring files, be sure to format your microSD™ memory

card with PC format FAT32. See “Formatting Your microSD™ Card Using

Your PC” on page 141 for more information.

1. Plug in the USB cable to your phone and connect it to a

USB port on your PC.

2. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get

Tunes & Tones menu is highlighted, press .

3. Highlight .

4. Your phone should display the message, Connected.

5. Open Windows Media Player 10 on your PC and select the SYNC option.

6. The left-hand side of the Windows Media Player will display the files on your PC. Check the songs you want to download.

7. On the right-hand side of the Windows Media Player, select whether you want to download the music to

Removable storage card or Phone internal memory.

8. Press the Start Sync button on the upper left-hand side of the Windows Media Player.

9. A Synchronization Complete message will appear on the phone when downloading is complete.

10. Disconnect the USB cable.

11. To return to standby mode, press the key.

Manage Music

This option allows you to view your music sorted by genre, artist, album title, or song title. You can also create playlists.

148

Get Tunes & Tones

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get

Tunes & Tones menu is highlighted, press .

2. Highlight .

3. Your Music Library will appear. The following categories are available:

• Genres : This option organizes your songs by music type

(genre). For example, Folk, Rock, Country, Classical, Soul,

Unknown and so on. Each folder will contain all songs within that genre.

Artists : This option organizes your songs by artist.

Albums : This option organizes your songs by album title.

Even if you only have one song from an album, a folder for the album will display.

Songs : This option organizes your songs by song title. To add a song to a playlist, press the right soft key Options and select Add to playlist to place the song into one of your playlists.

Playlists : Any playlists that you have created are displayed in this option. Press the right soft key Create to create a new playlist. With a playlist highlighted, press the right soft key

Options to play, edit, rename, or erase the playlist, or to create a new playlist.

Inbox : This repository is where alert notifications are received when new music from a selected artist is available for download.

Play All : This option will play all of your songs in list order.

Shuffle : This option will re-sort a playlist order.

4. You can press the left soft key Catalog to go to the

Get V CAST Music catalog.

Section 9: Multimedia 149

Creating a Playlist

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get

Tunes & Tones menu is highlighted, press .

2. Highlight .

3. Highlight .

4. If playlist(s) already exist on the phone, press the right soft key Options. Highlight Create playlist and press .

Or, if no playlists exist, press the right soft key

Create.

5. Enter a title for the playlist in the text box and press .

6. Press the key to return to the Music Library menu.

You can select songs to add to the playlist by browsing through Genres, Artists, Albums, or Songs in the Manage

Music library.

7. Highlight a song, press the right soft key Options and select Add to Playlist. Highlight the appropriate playlist and press ADD.

8. To return to standby mode, press the key.

Editing a Playlist

1. In standby mode, press MENU and use the left navigation key to highlight GET IT NOW. The Get

Tunes & Tones menu is highlighted, press .

2. Highlight .

3. Highlight .

150

Get PIX & FLIX

4. Highlight the playlist you would like to edit and press the right soft key Options. Highlight Edit playlist and press .

5. To remove a song from the playlist, highlight the song and press the right soft key Remove.

6. To change the order of the songs in your playlist, highlight a song and press Move. Then use the Up or Down navigation keys to move the song up or down in the playlist order. When you are finished, press

Save.

7. To return to standby mode, press the key.

Get PIX & FLIX

This menu allows you to get new PIX and FLIX from the internet or take new PIX or FLIX using your phone’s camera. You can also view the saved pictures.

Get V CAST Video

V CAST, the next generation wireless technology that unveils a whole new multimedia experience at your fingertips, provides access to vibrant, full-color content from some of the biggest names in entertainment. V

CAST is your link to video on demand, which allows you to view or download video clips that contain breaking news, sports highlights, weather and more.

For additional information regarding V CAST Video and its use, see www.verizonwireless.com

.

Section 9: Multimedia 151

Note: To access and download videos, you must have the icon displayed.

Browsing, Selecting and Playing Video Clips

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get PIX & FLIX and press .

2. The Get V CAST Video option is highlighted. Press .

3. Use the up or down navigation keys to highlight the

V CAST Video category you want.

4. After choosing the category you want press . Choose a sub category, if applicable, by using the navigation keys or by entering the short-cut key number and press

.

5. Use the navigation key to highlight a video. You may press the right soft key Options to read the description of the video clip.

6. To view the highlighted video, press VIEW.

7. Highlight Yes to accept charges, if applicable, and then press . After connection and buffering occurs, the video clip begins.

Downloading a Video Clip

1. Launch V CAST Video and select a video you want to save. For information about launching your video player and choosing a video clip, review steps 1-5 of the

previous section, “Browsing, Selecting and Playing Video

Clips” above.

152

Get PIX & FLIX

2. To download and save the highlighted video, press

SAVE. The video clip will be saved to V CAST Video in

My FLIX.

3. Highlight Yes to accept charges, if applicable, and then press . The video download begins.

4. Once the download is completed, “Download

Complete.

Play video now?” appears in the display.

5. Select Yes and press to view the video, or select No to return to the V CAST Video menu.

Note: Not all video content available can be downloaded to your phone; however, all content is available for viewing.

Deleting Video Clips

1. Launch V CAST Video. For information about launching

your video player, review "Get New PIX" on page 155.

2. Press the right soft key Options. My Clips is highlighted.

3. Press . The clips you have downloaded are listed.

4. Use the navigation key to highlight the video you want to erase and press the right soft key Options. Erase is highlighted.

displays, then press .

Using the Video Gallery

The video clips you save are stored in a folder named

V CAST Video in My FLIX. You can access this folder without launching the V CAST Video application and delete your saved video clips directly.

Section 9: Multimedia 153

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get PIX & FLIX and press ..

3. Use the navigation key to highlight V CAST Video, then press .

4. Use the navigation key to highlight the video you want to delete and press the right soft key Options.

5. Use the navigation key to highlight Erase and then press .

6. Highlight Yes to confirm that you want to erase the saved clip, then press .

Configure Alerts for New Video Clips

1. Launch V CAST Video.

2. Use the right and left navigation keys to select the

V CAST Video categories you want to configure an alert.

3. Choose a sub category if applicable, then press the right soft key Options.

4. Highlight Alerts and press .

5. Highlight Configure alerts and press .

6. Select the alert content you want, and press .

7. After reading terms, highlight Save to accept and press

, or highlight Cancel to decline and press .

Note: Fees apply for text messages/alerts both sent and received.

154

Get PIX & FLIX

Get New PIX

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get PIX & FLIX and press ..

2. To get new PIX press Get New PIX. Press Get

New App. You are connected to the internet. Follow the on-screen prompts.

Take PIX

This menu launches the camera.

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get PIX & FLIX and press .

Or press the Camera/Camcorder key to activate the camera.

3. Press the right soft key Options, to choose the specific camera settings.

Use the right/left navigation keys to advance to each setting category, and the up/down navigation keys to make selections within each category. The following categories are available:

• Picture Mode : Auto, Portrait, Landscape, Macro, Night,

Daylight, and Backlight.

Flash : Off, Always On, Auto, Only This Shot

Self Timer : Off, 2 Sec., 5 Sec., 10 Sec.

Multi Shot : Series Shot, Divided Shot, Auto/Manual

Quality : Economy, Normal, Fine

Section 9: Multimedia 155

• Resolution : (2048X1536), (1600X1200), (1280X960),

(1024X768), (800X600), (640X480), (320X240), and Picture

ID

Brightness : 4, 3, 2, 1, 0, -1, -2, -3, -4

White Balance : Auto, Sunny, Cloudy, Tungsten, Fluorescent

ISO : Auto, ISO 100, ISO 200, ISO 400, ISO 800

• Color Effects : Normal, Black & White, Sepia, Negative,

Emboss, Sketch

Metering : Average, Center, Spot

Settings : Memory (store PIX to phone or microSD™ card),

Auto Focus, Icon Display, Shutter Sound, Reset Settings

• Camcorder : Switches from Camera to Camcorder

4. Press and hold TAKE to capture a picture. Press the left soft key Erase to delete it or press the right soft

5. To exit the camera, press the key.

Digital Camera Mode

1. Open your handset.

2. Rotate the flip clockwise 180 degrees until the internal display is facing outward and fold down. Starting

Camera appears in the display.

Note: Make sure the lens cover is not engaged.

3. Press the Options/Clr. The following options appear in the display:

• Picture Mode : Auto, Portrait, Landscape, Macro, Night,

Daylight, and Backlight.

Flash : Off, Always On, Auto, Only This Shot

Self Timer : Off, 2 Sec., 5 Sec., 10 Sec.

156

Get PIX & FLIX

Multi Shot : Series Shot, Divided Shot, Auto/Manual

Quality : Economy, Normal, Fine

Resolution : (2048X1536), (1600X1200), (1280X960),

(1024X768), (800X600), (640X480), (320X240), and Picture

ID

Brightness : 4, 3, 2, 1, 0, -1, -2, -3, -4

White Balance : Auto, Sunny, Cloudy, Tungsten, Fluorescent

ISO : Auto, ISO 100, ISO 200, ISO 400, ISO 800

Color Effects : Normal, Black & White, Sepia, Negative,

Emboss, Sketch

Metering : Average, Center, Spot

Settings : Memory (store PIX to phone or microSD™ card),

Auto Focus, Icon Display, Shutter Sound, Reset Settings

Camcorder : Switches from Camera to Camcorder

4. Press the Volume/Zoom key to highlight an option.

5. Press the menu.

Photo Capture key to open the pop-up

6. Press the Volume/Zoom key to highlight an option.

7. Press the Photo Capture key to select the option.

8. Press the Photo Capture key to take a picture. Any camera icons clear and the “Rotate to Send” message appears in the display.

Erase to delete the image.

Section 9: Multimedia 157

To send the PIX/FLIX image:

10. Rotate the flip counter clockwise 180 degrees to compose a PIX MSG.

Note: After you take the picture, rotating the flip back to its normal position automatically saves the picture and displays the CREATE PIX MSG screen with the first To: field highlighted.

11. Enter the phone number or e-mail address of the recipient (or recipients) using the keypad.

12. Press the right soft key Options to display a pop-up menu that provides the following options:

• Entry Mode : Choose from Word, Abc, ABC, 123, Symbols and Shortcuts modes of text entry.

Preview : Shows the message before it is sent.

Save As Draft : Save the message to your Draft folder.

Priority Level: Save the message with a High or Normal priority.

• Validity Period : Save the message for the assigned period of time.

• Deferred Delivery : Save the message to be delivered at the assigned delivery date and time.

• Add To Contacts : Save the recipients number to your

Contacts as a new entry or add to an existing entry.

13. Press the left soft key Add to select from the following options:

Contacts : Choose a number from your contacts list.

Groups : Choose a group or a number from your group.

• Recent Calls : Choose a number from the recent calls list.

• To PIX Place : Send the message to the PIX Place.

158

Get PIX & FLIX

14. Press once you’ve finished entering the phone number(s) or email address(es).

15. In the Text field, compose your message.

16. Press the up/down navigation key to highlight the Sound field. Press the left soft key Sounds to select a sound.

Press the up/down navigation key to highlight the desired sound and press .

17. Press the down navigation key to highlight the Subject field. Press the left soft key Abc to change entry mode. Press the right soft key Options to Add

Quick Text. Press the up/down navigation key to highlight the desired Quick Text phrase, and press .

18. Press the down navigation key to add Name Card. Press the left soft key Add to select My Name Card or an entry from your Contacts list. Follow the prompts and press to insert.

19. Once all fields are complete, press to send the message to the intended recipient(s).

PIX Gallery

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get PIX & FLIX and press .

3. Press the left soft key My PIX to review the albums.

The My PIX menu displays with Default Album highlighted.

Section 9: Multimedia 159

160

4. Press the right soft key Options to view your pictures in a Slide Show, or to Lock the pictures from deletion. Highlight Slide Show and press . The

SLIDE SHOW SETTINGS appears in the display.

Use the up/down navigation key to change fields.

Use the left/right navigation key to set the fields and

Press the left soft key Pause to pause the slide show.

Press the right soft key Done to return to PIX Gallery.

Press VIEW to view in full screen mode.

5. From the My PIX menu, press to view the highlighted picture. Press VIEW. Press the right soft

Send : Launches the Create PIX Msg screen.

To PIX Place : Transfers the file to the online gallery.

Get New : Launches the internet to get online pictures.

Set As : Set the picture as the Main Wallpaper, Front

Wallpaper or Picture ID image.

• Zoom: Allows you to zoom in on the highlighted picture.

• Print: Allows you to print the image.

• Rename : Allows you to rename the picture.

• Move : Moves the images from the card to the phone and/or

Default Album.

• Lock/Unlock : Locks the picture to prevent deletion.

• Erase : Erases the selected picture from the gallery.

• Erase All : Erases all pictures from the gallery.

• Pix Editor: Allows you to edit the PIX.

Get PIX & FLIX

• Make Slide Show : Allows you to view of a series of pictures.

• Make Postcard : Adds text to a picture selected from the PIX

Gallery.

• PIX Info: Provides the date, name, time, location, resolution, and size of the picture.

6. Use the navigation key to make your selection and press

.

Take FLIX

This menu launches the camcorder.

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW.

Highlight Get PIX & FLIX and press .

Press the right soft key Options to select from the following options:

• Recording Mode : Limit To FLIX Msg (to record up to a 15 second clip to attach to a FLIX message), Normal (to record video with length up to 10 minutes at a time).

Flash : Off, Always On, Auto.

Self Timer : Off, 2 Sec., 5 Sec., 10 Sec.

Quality : Economy, Normal, or Fine. Recording Mode must be set to Normal for Quality options Normal and Fine to appear.

Resolution : (320X240), (176X144) FLIX Msg

Brightness : 4, 3, 2, 1, 0, -1, -2, -3, -4

White Balance : Auto, Sunny, Cloudy, Tungsten, Fluorescent

Color Effects : Normal, Black & White, Sepia, Negative,

Emboss

Section 9: Multimedia 161

• Settings : Memory (store FLIX to phone or microSD™ card),

Icon Display, Start Sound, End Sound, Call Interruption, Reset

Setting.

• Camera : Switches from camcorder to camera.

3. Press to save the settings.

Pause or press to stop recording.

5. After you stop recording, press the right soft key

Save, press the left soft key Erase, or press

PLAY.

6. To exit the camcorder, press the key.

Note: If you receive an incoming call while using your camcorder, the video recording is stopped. You will be presented with the call Ignore / Accept screen. If you ignore the call, then you are given the choice to Save, Send or Erase the video. If you accept the call, then your video is auto-saved and the camcorder application exits in the background.

Note: If the battery level becomes too low while you are recording, the recording is stopped and the video is auto-saved. The low battery indicator will be displayed and you will exit from the camcorder application. If your battery is too low then the phone will power down without saving the video.

Note: If you receive a text message, a multi-media message or a voice mail while you are recording, the video recording is stopped. You are given the choice to View Now or View Later. If you choose later, you are given the chance to Save, Send or Erase the video. If you want to view the message now, the video is auto-saved and the camera application exits in the background.

162

Get PIX & FLIX

My FLIX

This menu allows you to review the videos you have taken or downloaded and stored into your phone and/ or microSD™ card.

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get PIX & FLIX and press .

3. Press to view the FLIX in thumbnail mode. Press the navigation key to highlight the desired video clip and

4. After playing the video, press the CLR key to return to the thumbnail view.

5. Press the right soft key Options for the following options. Highlight an option and press to make your selection.

• Send

• To PIX Place

• Get VCast Video

• Capture Frame

• Set As Wallpaper

• Rename

• Move

• Lock/Unlock

• Erase

• Erase All

• FLIX Info

Section 9: Multimedia 163

PIX Place

Send a PIX to your online album.

Note: You must first setup your account on the Verizon Wireless website: www.verizonwireless.com

before establishing a connection.

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get PIX & FLIX and press .

2. Highlight PIX Place and press . The PIX Place signon screen displays.

3. Enter your Mobile Number and Password. Use the navigation key to highlight LOGIN and press . You are now connected to your online album.

Printing Pictures Using PictBridge

PictBridge is an industry standard established by the

Camera & Imaging Products Association (CIPA) that enables a range of digital photo solutions, including direct photo printing from a digital camera to a printer without the need for a PC.

Printing From Your Phone

The A990 comes equipped with a built-in camera that allows you to print images directly to a printer using the PictBridge technology. A USB cable must be connected between the two devices before any printing can occur.

164

Printing Pictures Using PictBridge

To use PictBridge to print pictures from your phone :

1. Insert one end of the accessory cable into the USB slot on the printer. (Printer must support PictBridge technology.)

GET IT NOW. Press

Get PIX & FLIX.

4. Insert the USB cable into your phone.

5. Read the Connect Printer message and press the right soft key Next.

6. Highlight the desired image and press the right soft key

Next. (To select multiple images, press to place a check mark next to each image selected.)

7. Highlight Copies and press the navigation key left or right to select the desired number of copies to print.

8. Press the navigation key down to select Type. Press the navigation key left or right to select one of the following sizes:

• 4x6

Default

Note: These sizes may vary and are dependent on the printer’s capabilities.

9. Press the navigation key down to select Size. Press the navigation key left or right to select one of the following:

Standard : prints the standard image.

Index : prints the index information.

Note: These options may vary and are dependent on the printer’s capabilities.

Section 9: Multimedia 165

10. Press the navigation key down to select Date. Press the navigation key left or right to turn on or off.

11. Press the navigation key down to select Border. Press the navigation key left or right to turn on or off.

12. Press the right soft key Preview to preview the image, or press the left soft key Print to print the image.

13. Select Yes to confirm printing and press .

Get Fun & Games

Select from several fun and interesting applications or a broad category of games that you can play on your phone.

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get Fun & Games and press .

3. Use the navigation keys to make a selection and press

.

4. Choose the charge Either Subscription or Unlimited, then press . Follow in screen prompts to apply.

Get News & Info

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get News & Info and press .

2. The browser is launched and a pop up screen with available applications is displayed.

3. Use the navigation key to browse the categories.

166

Get Going

4. Once the desired category is highlighted, press to enter the category list.

When you use Get News & Info, some of the keys operate differently than during a normal phone call.

It presents on-screen items in any of the following ways:

• Text or numeric input

• Links (embedded in content)

• Numbered options (some options may not be numbered)

• Simple text

You can utilize the options or links by using the soft keys.

Get Going

Download applications that keep you in touch with the world, keep you organized, and help you find the coolest spots.

1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. Highlight

Get Going and press .

3. Highlight the application you wish to download and press

.

4. Follow on screen subscription prompts and press .

The download process begins.

5. At the “App installed successfully. Would you like to run it?” prompt, press Yes to launch application, or No to return to category list.

Section 9: Multimedia 167

Note: The GET GOING menu will display all downloaded applications, with the most current download first.

Get Extras

Get Extras is a backup assistant for your Address Book.

Get Extras saves your address book entries to a database on Verizons network to protect them in the event that your phone is damaged and are retrieved and pushed to your new phone preventing manual reentry.

168

Section 10: Tools

Topics Covered

• Voice Commands

• Calculator

• Calendar

• Alarm Clock

• World Clock

• Stop Watch

• Notepad

The topics covered in this section allow you to schedule appointments, view the calendar, set an alarm, view time zones, take notes, and perform simple math calculations.

Section 10: Tools 169

Voice Commands

Your phone includes VoiceSignal, an advanced speech recognition software that you can use to activate a wide-variety of functions on your phone.

Note: See also “VoiceSignal™” on page 39 for more information.

Voice Commands options and sub-menus allow you to set options that tailor VoiceSignal to suit your needs.

Voice Dial

To set the key or action that launches VoiceSignal, do the following:

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Voice Commands,

The following options appear in the display:

Voice Dial.

Voice Key Only — Press the Voice Recognition key ( ) to activate VoiceSignal for one call or to launch one function.

Voice Key/EarMic — Attach a headset to your phone. Press the Voice Recognition key ( ) to activate VoiceSignal. Now, you can make and end calls using VoiceSignal by pushing the button on the headset.

Voice Key/Flip — Press the Voice Recognition key ( ) to activate VoiceSignal for repeated calls. Open and close folder to make and end calls using Voice Kit. Press to release

VoiceSignal.

2. Use the navigation keys to highlight the option you want, then press to save and exit.

Voice Settings

For information, See “VoiceSignal™” on page 39.

170

Voice Commands

Menu Readout

With Menu Readout on, your phone “reads” main menu items through the earpiece when you highlight each one. To enable Menu Readout, do the following:

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Voice Commands,

Menu

Readout. The following options appear in the display:

On — Enables Menu Readout.

Off — Disables Menu Readout.

The current setting is highlighted. The default setting is

Off.

2. Use the navigation keys to highlight On, then press to save and exit.

Call Announcement

With Call Annoncement on, you hear a “Call from

<Contact name/number>” voice announcement of a new call instead of a ringtone. To enable Call

Announcement, do the following:

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Voice Commands,

Call

Announcement. The following options appear in the display:

On — Enables Call Announcement.

Off — Disables Call Announcement.

The current setting is highlighted. The default setting is

Off.

Section 10: Tools 171

2. Use the navigation keys to highlight On, then press to save and exit.

Calculator

You can perform calculations, including addition, subtraction, multiplication and division using your phone.

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Calculator,

Normal. The

Calculator opens.

2. Enter the first number in your equation using the keypad.

(Numbers can be up to nine digits long.)

3. Press the right soft key Operator to display a pop-up menu which allows you to enter a Parenthesis or Power if desired. Press the left soft key Clear or to clear all data entered.

4. Press to change the sign for a number to a negative.

5. Press the to add a decimal point.

6. Use the navigation keys to set the type of calculation that you wish to perform. Your choices are as follows:

Up key: [+] Addition

Down key: [-] Subtraction

Right key: [x] Multiplication

Left key: [÷] Division

7. Use the keypad to enter the second number into your equation.

8. Press to perform the calculation and view the result.

172

Calculator

Tip

Calculates the tip and determine how much each person should pay for the meal.

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Calculator,

Calculator opens.

Tip. The Tip

2. Populate the following fields:

• Bill: enter the amount of the bill.

• Tip: enter the tip percentage.

• # Paying: enter the amount of people paying.

Note: Press the key to enter a decimal.

3. The tip is automatically calculated in the section below.

Converter

The Converter menu provides the following conversion categories:

• Temperature

• Length

• Weight

• Area

• Volume

• Currency

To convert any of the above categories, do the following:

1. Scroll to the conversion feature you wish to use and press the key.

Section 10: Tools 173

2. Use the Left or Right navigation keys to select the From units of money or measure for the quantity you want converted.

3. Enter the quantity you want converted in the text box.

Note: Press the key to enter a decimal. In the Temperature conversion feature, the (+/-) key is active.

4. Use the Left or Right navigation keys to select the To units of money or measure for the quantity you want converted.

Calendar

Schedule up to eight events for any day by indicating each event’s start and end time. Set alarms for events so that you can be alerted before an event takes place.

Events scheduled for future dates automatically appear on your Today events schedule for the present day.

Add a new event

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Calendar. The calendar appears in the display with the current date highlighted.

2. To view available options, press the right soft key

Options. A pop-up menu appears in the display that contains the menu items.

• Weekly : View the current week.

• Go To Date : Go to any date that you specify.

• Go to Today : View today’s events.

• Erase Old : Select a past event to delete.

174

Calendar

• Erase All : Delete all events in your calendar

3. Press the left soft key Add to add a new event.

4. The Appointment name field is highlighted. Enter the name and use the down navigation key to move to the following fields:

Start Date: Enter the start date for the event.

Start Time: Enter the start time for the event.

• am/pm : Select from am or pm for the start time.

Note: Press for am or for pm.

End Date: Enter the end date for the event.

• End Time : Enter the end time for the event.

• am/pm : Select from am or pm for the end time.

Note: Press for am or for pm.

Time Zone: Enter the time zone you wish your event to reflect.

Note: Each time zone is listed as both a standard time zone and a daylight time zone. For example, if you are in the Central Time zone, you would enter CDT (Central Daylight Time) if you are on Daylight Savings time, or

CST (Central Standard Time) if you are not.

Recurrence: Select the frequency of the event.

Alert: Sets the alarm for the event. Select from Tone, Vibrate, or

Light Only.

Reminder: Set a reminder up to one day before the event.

Alert Time: Set the Alert Time to sound before the event takes place.

Section 10: Tools 175

5. Fill in and select event details using the navigation keys and the alpha-numeric keypad.

6. Press . The event is saved.

View an event

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Calendar.

2. A calendar appears in the display with the current date highlighted.

3. Use the navigation keys to highlight the date containing the event that you wish to view. Press the right soft key

Options.

Tip: Use the volume key to move between months in the calendar.

4. In the pop-up menu that appears in the display, use the navigation key to highlight Go To Date, then press .

5. Enter the desired date in the box, then press . The month that you entered appears in the display with the event date highlighted.

7. To edit the event, press the left soft key Edit. Make changes, then press SAVE.

8. Press the right soft key Options. A pop-up menu appears in the display.

9. To erase the current event, press Erase. A pop-up menu appears with Yes highlighted. press to erase, or highlight No to cancel.

176

Alarm Clock

10. To see the selected date in a month view, press

Monthly.

11. To see the selected date in a week view, press

Weekly.

Alarm Clock

Your phone has an alarm clock that can be set to go off once, or recur daily at a specific time. Once set, the alarm clock is easy to change or turn off.

Set An Alarm

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Alarm Clock. The Alarm Clock menu displays with the Alarm 1 highlighted.

2. The following options appear in the display:

Alarm 1

Alarm 2

• Alarm 3

3. Use the navigation key to highlight the alarm that you wish to enable, then press . The Set Alarm (1, 2, or 3 depending on your selection) screen appears in the display.

4. The Alarm field is highlighted. Use the left/right navigation keys to select On or Off.

5. Press the down navigation key to highlight the Time field, then enter the time that you wish for the alarm to sound.

Section 10: Tools 177

6. Press the down navigation key once to highlight the am/ pm field. Use the left/right navigation keys to select am or pm.

Note: Press for am or for pm.

7. Press the down navigation key once to highlight the

Frequency field. Use the left/right navigation keys to set the frequency (occurrence) of the alarm. Below lists and defines the options for this field.

Once : The alarm sounds only once, at the time specified.

Daily : The alarm sounds every day at the time specified.

• Mon-Fri : The alarm sounds Monday through Friday at the time specified.

Weekends: The alarm sounds Saturday through Sunday at the time specified.

8. Press the down navigation key once to highlight the first

Ringer field. Use the left/right navigation keys to set the ringer to Tone, Vibrate, or Light Only.

9. If you selected Tone, press the down navigation key again to highlight the second field. Use the left/right navigation keys to set the alert tone to VZW Default Tone, or select a tone from your My Ringtones or My Sounds folders.

10. When all fields have correct information entered, press

SAVE to save your settings.

Disable an alarm before it sounds

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Alarm Clock. The Alarm Clock

178

World Clock menu displays with the Alarm 1 highlighted.

2. Use the navigation keys to highlight the alarm you wish to disable, then press the right soft key Options. A pop-up menu appears in the display.

3. Press

Reset to reset the highlighted alarm or press Reset

All to reset all of the alarms.

Snooze

When an alarm sounds, a menu screen displays that allows you to either turn the alarm off or to have the alarm ring again after 5 minutes. This is called Snooze.

To use this feature follow these steps:

1. Set one of your phone’s 3 alarms. For more information

about setting an alarm, see “Set An Alarm” on page 177.

2. When an alarm sounds, use the up/down navigation key to highlight Snooze or Dismiss. To snooze, highlight

Snooze and press to set it to ring again after 5 minutes. Or, highlight Dismiss to turn the alarm off completely. The alarm turns off and the standby screen displays.

World Clock

World Clock allows you to view the time of day or night in any part of the world.

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press World Clock.

2. Use the left soft key Cities to display the 45 supported cities. Press to save your entry.

Section 10: Tools 179

3. Press the right soft key Options to view the following options:

• Set As Local Time : Sets the time according to the city chosen in the Cities field.

• DST On : Sets the Daylight Savings time option.

4. You can scroll through other cities by pressing the navigation keys.

5. Press to return to standby mode.

Stop Watch

This feature allows you to use a stop watch. Press the

START to start the stopwatch. Press STOP to stop stopwatch. Press the right soft key Reset to erase recorded stopwatch time.

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Stop Watch. The Stop Watch appears in the display.

2. Press the START to start the stopwatch.

4. Press the right soft key Reset to erase recorded stopwatch time.

Notepad

Create and store notes in Notepad. Return to Notepad anytime to review and edit your notes.

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Notepad. The Note Pad menu opens.

180

Notepad

2. If you have any stored notes, they appear as a list in the display. If this is your first time in Notepad, No Notes displays.

3. To add a new memo, press the left soft key Add, then enter the memo using the keypad.

4. While entering a memo, press the left soft key Abc, to display a pop-up menu with the following text entry modes

• Word

• Abc

• ABC

• 123

• Symbols

5. Use the navigation keys to select the other available text entry modes of 123, Word, and Symbol, or press to exit the pop-up menu.

6. When you’re finished entering details for the note, press

. The note is saved.

Review, Add, Edit, and Erase Memos

1. In standby mode, press MENU, then press the right navigation key to highlight SETTINGS & TOOLS.

Press Notepad. The Note Pad menu opens. If you have any stored notes, they appear as a list in the display.

2. With a memo highlighted, press the right soft key

Options. A pop-up menu with the options listed in the following table appears in the display:

• Edit : Edit the note currently highlighted or appearing in the display.

Section 10: Tools 181

182

• Erase : Erase the note currently highlighted or appearing in the display.

Erase All : Erase all notes.

Lock/Unlock : Locks messages. When a message is locked it cannot be deleted until it is unlocked.

3. Use the navigation keys to highlight an option or press

to exit the pop-up menu.

4. Press to perform the highlighted option’s function.

Section 11: Mobile Web

Topics Covered

• Mobile Web

• Launching Mobile Web

• Exit Mobile Web

• Navigate the Web

• Mobile Web Soft Keys

• Links

• Place a Call While Using Mobile Web

This section outlines the available gaming options and accessories for your phone. For more information, contact your service provider.

Section 11: Mobile Web 183

Mobile Web

Mobile Web allows you to surf the web from your wireless phone.

If you receive a call while using Mobile Web, the web session is suspended during the call. Once the call ends, your Mobile Web session resumes where you left off.

Note: This feature is currently unavailable outside of the United States.

Only available within the Verizon Wireless Enhanced Services Area.

Any time the service indicator icon is visible, you are connected to the

Internet and billed accordingly. Rates and prices vary according to your service contract. For further information on billing contact Verizon Wireless.

Launching Mobile Web

Note: This feature is currently unavailable outside of the United States.

Only available within the Verizon Wireless Enhanced Services Area.

1. In standby mode, press the up navigation key. Mobile

Web and a list of categories (representing one or more web sites) appears in the display.

2. Use the navigation key to browse the categories.

3. Once the desired category is highlighted, press to enter the category list.

Exit Mobile Web

To exit the Mobile Web, press the key.

184

Navigate the Web

Navigate the Web

Note: This feature is currently unavailable outside of the United States.

Only available within the Verizon Wireless Enhanced Services Area.

When you use Mobile Web, some of the keys operate differently than during a normal phone call.

Mobile Web presents on-screen items in any of the following ways:

• Text or numeric input

• Links (embedded in content)

• Numbered options (some options may not be numbered)

• Simple text

You can act on the options or links by using the soft keys.

Mobile Web Soft Keys

Note: This feature is currently unavailable outside of the United States.

Only available within the Verizon Wireless Enhanced Services Area.

At the bottom of the Mobile Web display contains the browser commands. The left and right soft keys on the keypad are used to perform the commands in the display. These are called “soft keys” because their function changes depending where you are in the application.

How Mobile Web keys work

The following table lists Mobile Web keys and functions.

Section 11: Mobile Web 185

186

Navigation Key: Use the navigation key to browse lists and highlight options.

CLR Key: A browser back-up key. Press once to back up one page. Press and hold to go back to Mobile Web home page.

Press to clear the last number, letter, or symbol entered. Press and hold to completely clear the display.

Asterisk/Shift Key: Press before entering text to enable upper case characters (in Abc mode).

0/Next Key: Press to enter a zero (0), or to display another word in the dictionary when in Word entry mode.

Pound/Space Key: Press to insert a space when entering text.

Numbers 1 - 9: Use the number keys to select items in a menu if they are numbered.

END Key: Press to exit Mobile Web and return the phone to standby mode.

Left Soft Key: Press the left soft key to go to the highlighted web link and/or perform the function above it in the display.

Right Soft Key: The right soft key is the Menu key.

Press this key to display a pop-up menu with several options.

SEND Key: Press to dial a highlighted number.

Links

Links

Note: This feature is currently unavailable outside of the United States.

Only available within the Verizon Wireless Enhanced Services Area.

Links can serve several purposes, such as jumping to a different page, to a different site, or initiating a phone call.

Links are underlined (__). Normally, the left soft key is used to select a highlighted link.

Place a Call While Using Mobile Web

Note: This feature is currently unavailable outside of the United States.

Only available within the Verizon Wireless Enhanced Services Area.

You can place a call while using Mobile Web if the website supports this feature. Press the appropriate soft key to call the number. In most cases you can also press to call the number. The Internet connection terminates when you initiate the call. After you end the call, your phone returns to standby mode.

Section 11: Mobile Web 187

188

Section 12: Health and Safety

Information

Topics Covered

• Health and Safety Information

This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone.

Section 12: Health and Safety Information 189

Health and Safety Information

Exposure to Radio Frequency (RF) Signals

Certification Information (SAR)

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal

Communications Commission (FCC) of the U.S. government. These FCC exposure limits are derived from the recommendations of two expert organizations, the

National Counsel on Radiation Protection and

Measurement (NCRP) and the Institute of Electrical and

Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.

The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the

Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of

1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.

SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined

190

Health and Safety Information at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the

FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.

The maximum SAR values for this model phone as reported to the FCC are:

• CDMA

Head:1.09

Body-worn: 0.841

SAR information on this and other model phones can be viewed on-line at www.fcc.gov/oet/fccid. To find information that pertains to a particular model phone, this site uses the phone FCC ID number which is usually

Section 12: Health and Safety Information 191

printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/ sar.

UL Certified Travel Adaptor

The Travel Adaptor for this phone has met UL 1310 safety requirements. Please adhere to the following safety instructions per UL guidelines.

FAILURE TO FOLLOW THE INSTRUCTIONS

OUTLINED MAY LEAD TO SERIOUS PERSONAL

INJURY AND POSSIBLE PROPERTY DAMAGE

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE

INSTRUCTIONS.

DANGER - TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, CAREFULLY FOLLOW THESE

INSTRUCTIONS.

FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A.,

USE AN ATTACHMENT PLUG ADAPTOR OF THE

PROPER CONFIGURATION FOR THE POWER

OUTLET.

Consumer Information on Wireless Phones

The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure

192

Consumer Information on Wireless Phones from wireless phones. The FDA publication includes the following information:

What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called

"cell," "mobile," or "PCS" phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited by Federal Communications

Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called

"cordless phones," which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's compliance limits.

Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level

Section 12: Health and Safety Information 193

RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:

• Support needed research into possible biological effects of RF of the type emitted by wireless phones;

• Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and

• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.

194

Consumer Information on Wireless Phones

FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:

• National Institute for Occupational Safety and Health

• Environmental Protection Agency

• Federal Communications Commission

• Occupational Safety and Health Administration

• National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group activities, as well.

FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission

(FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.

FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.

Section 12: Health and Safety Information 195

What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.

196

Consumer Information on Wireless Phones

What research is needed to decide whether RF exposure from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed.

Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years' follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years.

The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.

What is FDA doing to find out more about the possible health effects of wireless phone RF?

FDA is working with the U.S. National Toxicology

Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF).

FDA has been a leading participant in the World Health

Organization international Electromagnetic Fields (EMF)

Project since its inception in 1996. An influential result of

Section 12: Health and Safety Information 197

this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.

FDA and Cellular Telecommunications & Internet

Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.

The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.

What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?

If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.

• If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a

198

Consumer Information on Wireless Phones headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.

What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones.

Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.

Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the

United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.

Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?

Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to

Section 12: Health and Safety Information 199

believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head.

On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.

Do wireless phone accessories that claim to shield the head from RF radiation work?

Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised.

Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the

Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these

200

Consumer Information on Wireless Phones defendants lacked a reasonable basis to substantiate their claim.

What about wireless phone interference with medical equipment?

Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason,

FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones.

This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by

FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary standard sponsored by the Institute of

Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.

Section 12: Health and Safety Information 201

Additional information on the safety of RF exposures from various sources can be obtained from the following organizations:

• FCC RF Safety Program: http://www.fcc.gov/oet/rfsafety/

• Environmental Protection Agency (EPA): http://www.epa.gov/radiation/

• Occupational Safety and health Administration's (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/ index.html

• National institute for Occupational Safety and health (NIOSH): http://www.cdc.gov/niosh/topics/emf/

• World health Organization (WHO): http://www.who.int/peh-emf/

• International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de

• National Radiation Protection Board (UK): http://www.hpa.org.uk/radiation/

• Updated 7/16/2003: US Food and Drug Administration http://www.fda.gov/cellphones

Road Safety

Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.

When driving a car, driving is your first responsibility.

When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless phone and its features, such

202

Road Safety as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today.

3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voicemail answer it for you.

4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.

5. Do not take notes or look up phone numbers while driving. Jotting down a "to do" list or flipping through your address book takes attention away from your primary responsibility, driving safely.

6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary.

If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

Section 12: Health and Safety Information 203

7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!

9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.

10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number.

"The wireless industry reminds you to use your phone safely when driving."

For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.com

Provided by the Cellular Telecommunications & Internet

Association.

204

Operating Environment

Operating Environment

Remember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder if you are using an external antenna).

Using Your Phone Near Other Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.

Pacemakers

Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.

These recommendations are consistent with the independent research and recommendations of Wireless

Technology Research.

Section 12: Health and Safety Information 205

Persons with pacemakers:

• should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.

• should not carry the phone in a breast pocket.

• should use the ear opposite the pacemaker to minimize potential interference.

If you have any reason to suspect that interference is taking place, switch your phone off immediately.

Hearing Aid Compatibility with Mobile Phones

When some mobile phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.

The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box.

The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss.

If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.

206

Using Your Phone Near Other Electronic Devices

M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.

T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.)

Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.

Other Medical Devices

If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also

Section 12: Health and Safety Information 207

consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices require you to do so.

Potentially Explosive Environments

Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch the phone off while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots

(fuel storage and distribution areas), chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.

Emergency Calls

This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee

208

Emergency Calls connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

To make an emergency call:

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present location

(for example, 911 or other official emergency number).

Emergency numbers vary by location.

3. Press the Send key ( ).

If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible.

Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so.

Restricting Children's access to your Phone

Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill.

Section 12: Health and Safety Information 209

FCC Notice and Cautions

FCC Notice

The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated.

Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection

Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One

Batterymarch Park, Quincy, MA 02269, Attn: Publication

Sales Division.

Cautions

Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment, and void your authority to operate this equipment. Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone.

Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.

Other Important Safety Information

• Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.

210

Product Performance

• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

• Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.

• For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.

• Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation.

• Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

Product Performance

Getting the Most Out of Your Signal Reception

The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal.

If you're inside a building, being near a window may give you better reception.

Understanding the Power Save Feature

If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks

Section 12: Health and Safety Information 211

service availability or you can check it yourself by pressing any key.

Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone returns to standby mode.

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver.

When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode.

Maintaining Your Phone's Peak Performance

For the best care of your phone, only authorized personnel should service your phone and accessories.

Faulty service may void the warranty.

There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.

• If your phone is equipped with an external antenna, hold the phone with the antenna raised, fully-extended and over your shoulder.

• Do not hold, bend or twist the phone's antenna, if applicable.

• Do not use the phone if the antenna is damaged.

• If your phone is equipped with an internal antenna, obstructing the internal antenna could inhibit call performance.

• Speak directly into the phone's receiver.

212

Availability of Various Features/Ring Tones

• Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery. If it is inoperable, call Customer

Care for service.

Availability of Various Features/Ring Tones

Many services and features are network dependent and may require additional subscription and/or usage charges. Not all features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information.

Section 12: Health and Safety Information 213

Battery Standby and Talk Time

Standby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns.

Battery Precautions

• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can potentially cause damage to the phone and battery. If you suspect damage to the phone or battery, take it to a service center for inspection.

• Never use any charger or battery that is damaged in any way.

• Use the battery only for its intended purpose.

• If you use the phone near the network's base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.

• Follow battery usage, storage and charging guidelines found in the user’s guide.

• Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.

• If left unused, a fully charged battery will discharge itself over time.

• Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave

214

Battery Precautions the battery connected to a charger for more than a week, since overcharging may shorten its life.

• Do not use incompatible cell phone batteries and chargers.

Some Web sites and second-hand dealers, not associated with reputable manufacturers and carriers, might be selling incompatible or even counterfeit batteries and chargers.

Consumers should purchase manufacturer or carrier recommended products and accessories. If unsure about whether a replacement battery or charger is compatible, contact the manufacturer of the battery or charger.

• Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.

• Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged.

Li-ion batteries are particularly affected by temperatures below

0 °C (32 °F).

• Do not place the phone in areas that may get very hot, such as on or near a cooking surface, cooking appliance, iron, or radiator.

• Do not get your phone or battery wet. Even though they will dry and appear to operate normally, the circuitry could slowly corrode and pose a safety hazard.

• Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.

• Do not permit a battery out of the phone to come in contact with metal objects, such as coins, keys or jewelry.

• Do not crush, puncture or put a high degree of pressure on the battery as this can cause an internal short-circuit, resulting in overheating.

Section 12: Health and Safety Information 215

• Dispose of used batteries in accordance with local regulations.

In some areas, the disposal of batteries in household or business trash may be prohibited. For safe disposal options for

Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle. Do not dispose of batteries in a fire.

Care and Maintenance

Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years

• Keep the phone and all its parts and accessories out of the reach of small children.

• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.

• Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.

• Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.

• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards.

• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.

216

Care and Maintenance

• Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation.

• Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated.

• If your phone has an external antenna, use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.

• If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.

Section 12: Health and Safety Information 217

218

Section 13: Warranty Information

Topics Covered

• Standard Limited Warranty

This section explains the warranty information for your new phone.

Section 13: Warranty Information 219

Standard Limited Warranty

What is Covered and For How Long? SAMSUNG

TELECOMMUNICATIONS AMERICA, L.P.

("SAMSUNG") warrants to the original purchaser

("Purchaser") that SAMSUNG's Phones and accessories

("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date:

Phone

Batteries

Leather Case/ Pouch

1 Year

1 Year

90 Days

Other Phone Accessories 1 Year

What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser. This Limited

Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical, electrical or electromechanical stress, or modification of any part of Product, including antenna, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) any plastic surfaces or other externally exposed parts that are scratched or damaged due to normal use; (d) malfunctions resulting from the use of Product in conjunction with accessories, products, or

220

Standard Limited Warranty ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of

Product, or (g) Product used or purchased outside the

United States or Canada. This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not specified or approved by

SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken or show evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for which it is specified.

What are SAMSUNG's Obligations?

During the applicable warranty period, SAMSUNG will repair or replace, at

SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product. To obtain service under this Limited Warranty, Purchaser must return Product to an authorized phone service facility in an adequate container for shipping, accompanied by

Purchaser's sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of

Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call Samsung

Customer Care at 1-888-987-4357. Upon receipt,

SAMSUNG will promptly repair or replace the defective

Product. SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/ replaced leather cases, pouches and holsters will be

Section 13: Warranty Information 221

warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer.

All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this

Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the repair or return of such

Product.

WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY

CONTAINED HEREIN, PURCHASER TAKES THE

PRODUCT "AS IS," AND SAMSUNG MAKES NO

WARRANTY OR REPRESENTATION AND THERE

ARE NO CONDITIONS, EXPRESS OR IMPLIED,

STATUTORY OR OTHERWISE, OF ANY KIND

WHATSOEVER WITH RESPECT TO THE PRODUCT,

INCLUDING BUT NOT LIMITED TO:

• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR

ANY PARTICULAR PURPOSE OR USE;

• WARRANTIES OF TITLE OR NON-INFRINGEMENT;

• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE

PRODUCT;

• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS

CONTAINED THEREIN; OR

• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF

ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING

THERETO.

NOTHING CONTAINED IN THE INSTRUCTION

MANUAL SHALL BE CONSTRUED TO CREATE AN

222

Standard Limited Warranty

EXPRESS WARRANTY OF ANY KIND WHATSOEVER

WITH RESPECT TO THE PRODUCT. ALL IMPLIED

WARRANTIES AND CONDITIONS THAT MAY ARISE

BY OPERATION OF LAW, INCLUDING IF

APPLICABLE THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE HEREBY LIMITED TO

THE SAME DURATION OF TIME AS THE EXPRESS

WRITTEN WARRANTY STATED HEREIN. SOME

STATES/PROVINCES DO NOT ALLOW

LIMITATIONS ON HOW LONG AN IMPLIED

WARRANTY LASTS, SO THE ABOVE LIMITATION

MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG

SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY

KIND

RESULTING FROM THE PURCHASE, USE, OR

MISUSE OF, OR INABILITY TO USE THE PRODUCT OR

ARISING DIRECTLY OR INDIRECTLY FROM THE USE

OR LOSS OF USE OF THE PRODUCT OR FROM THE

BREACH OF THE EXPRESS WARRANTY, INCLUDING

INCIDENTAL, SPECIAL, CONSEQUENTIAL OR

SIMILAR DAMAGES, OR LOSS OF ANTICIPATED

PROFITS OR BENEFITS, OR FOR DAMAGES ARISING

FROM ANY TORT (INCLUDING NEGLIGENCE OR

GROSS NEGLIGENCE) OR FAULT COMMITTED BY

SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR

ANY BREACH OF CONTRACT OR FOR ANY CLAIM

BROUGHT AGAINST PURCHASER BY ANY OTHER

PARTY. SOME STATES/PROVINCES DO NOT ALLOW

THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATION OR EXCLUSION MAY NOT APPLY TO

Section 13: Warranty Information 223

YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER

RIGHTS, WHICH VARY FROM STATE TO STATE/

PROVINCE TO PROVINCE. THIS LIMITED

WARRANTY SHALL NOT EXTEND TO ANYONE

OTHER THAN THE ORIGINAL PURCHASER OF THIS

PRODUCT AND STATES PURCHASER'S EXCLUSIVE

REMEDY. IF ANY PORTION OF THIS LIMITED

WARRANTY IS HELD ILLEGAL OR

UNENFORCEABLE BY REASON OF ANY LAW, SUCH

PARTIAL ILLEGALITY OR UNENFORCEABILITY

SHALL NOT AFFECT THE ENFORCEABILITY FOR

THE REMAINDER OF THIS LIMITED WARRANTY

WHICH PURCHASER ACKNOWLEDGES IS AND

WILL ALWAYS BE CONSTRUED TO BE LIMITED BY

ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

THE PARTIES UNDERSTAND THAT THE

PURCHASER MAY USE THIRD-PARTY SOFTWARE OR

EQUIPMENT IN CONJUNCTION WITH THE

PRODUCT. SAMSUNG MAKES NO WARRANTIES OR

REPRESENTATIONS AND THERE ARE NO

CONDITIONS, EXPRESS OR IMPLIED, STATUTORY

OR OTHERWISE, AS TO THE QUALITY,

CAPABILITIES, OPERATIONS, PERFORMANCE OR

SUITABILITY OF ANY THIRDPARTY SOFTWARE OR

EQUIPMENT, WHETHER SUCH THIRD-PARTY

SOFTWARE OR EQUIPMENT IS INCLUDED WITH

THE PRODUCT DISTRIBUTED BY SAMSUNG OR

OTHERWISE, INCLUDING THE ABILITY TO

INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT

WITH THE PRODUCT. THE QUALITY, CAPABILITIES,

OPERATIONS, PERFORMANCE AND SUITABILITY

224

Standard Limited Warranty

OF ANY SUCH THIRD-PARTY SOFTWARE OR

EQUIPMENT LIE SOLELY WITH THE PURCHASER

AND THE DIRECT VENDOR, OWNER OR SUPPLIER

OF SUCH THIRD-PARTY SOFTWARE OR

EQUIPMENT, AS THE CASE MAY BE.

This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's

Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited

Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.

Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by SAMSUNG and should not be relied upon.

Samsung Telecommunications America, L.P.

1301 East Lookout Drive

Richardson, Texas 75082

Phone: 1-800-SAMSUNG

Phone: 1-888-987-HELP (4357)

©2006 Samsung Telecommunications America,L.P. All rights reserved.

No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice.

Printed in Korea

Section 13: Warranty Information 225

226

Index

Numerics

1-touch dialing

85

2-touch dialing

85

3-touch dialing

86

911, notes about

124

A

Adding a New Contact

Entry

75

Alarm clock

snooze

179

turn off the alarm

178

Answer options

128

Auto answer

128

Auto answer icon

25

Auto retry

129

B

Backup to last menu

54

Battery

26

charging

28

indicator

29

installing

27

removing

27

strength icon

24

Bluetooth

about

133

Bluetooth icons

24

Bluetooth Settings

133

C

Calendar

add a new event

174

Call Functions

31

answering a call

33

Recent Calls

33

Roaming

37

Call history

calls using

35

definition

33

deleting entry

36

icons

35

new contact

35

updating existing

contact

35

Call restriction

130

Call Sounds

111

Camcorder

recording video

161

Camera

taking pictures

155

Changing Message

Settings

103

Chat

107

Clear key

21

Command Keys

20

Contact List

finding a contact entry

83

Contacts

73

adding a new contact entry

75

deleting a contact entry

84

227

editing an existing contact entry

83

finding my phone number

87

speed dialing

85

wait pause & 2-second pause

78

Creating and Sending PIX/

FLIX Messages

93

Creating and Sending TXT

D

Messages

91

Dialing

1-touch

85

2-touch

85

3-touch

86

Digital Camera Mode

156

send PIX/FLIX message

158

Disable alarm

178

Display

backlight

116

banner

115

language

120

screen icons

22

Downloading Music

142

Draft messages

101

Drafts folder

101

E

Edit lock code

123

E-Mail

106

Emergency numbers

lock mode

125

End key

21

Entering Text

65

changing text entry mode

66

entering numbers

71

entering symbols

70

entering upper and lower case

70

using VoiceMode

67

using Word mode

69

F

Finding a Contacts

Entry

83

Finding My Phone

Number

87

Folder

drafts

101

inbox

98

sent

99

G

Get It Now

140

Get New PIX

155

Get News & Info

166

Get PIX & FLIX

151

Get Tunes & Tones

141

Getting Started

9

understanding this user manual

11

voicemail

10

GPS icons

24

228

Groups

creating

80

move entries from/to

79

send messages to

80

send PIX msg to

82

viewing

79

H

Hard pause

78

I

Health and Safety

Information

189

Icons

alarm on

25

alarm only

24

battery strength

24

display

22

dormant

23

signal strength

22

silent mode

24

TTY

24

Inbox folder

98

Indicator

calendar appointment

25

missed calls

24

new message

24

,

25

no service

23

roaming

23

signal strength

22

speakerphone

24

standalone

23

Installing battery

27

Instant Messaging

107

In-use menu

56

L

Language setting

120

Left soft key

20

Links

187

Lock code, changing

123

Lock phone

122

M

Making a call

32

Manage Music

148

Master Volume

111

Memory Card Storage

29

Memos, editing

181

Menu Navigation

53

menu outline

57

Menu shortcuts

54

Menu, in-use option

56

Message folder

drafts

101

inbox

98

sent

99

Messages, receive in call

96

Messaging

89

types of messages

90

microSD

formatting using your handset

141

formatting using your

PC

141

Mobile IM

107

229

Mobile Web

183

exit

184

launch Mobile Web

184

links

187

navigate the web

185

soft keys

185

Mode

call answer

128

Multimedia

139

Music

downloading

142

managing your music

148

playing with flip closed

144

playing with flip open

145

transferring from PC

147

My Music

144

My Name Card

86

My phone #

87

N

Navigation key

22

Navigation key shortcuts

55

New message icon

24

No service indicator

23

Non-Supported Battery

26

Note pad

180

Notes and tips

12

Notes, description

12

P

Phone Memory Storage

30

Picture ID

132

PIX Gallery

159

PIX messages

rejecting

97

view later

97

Place a call while using

Mobile Web

187

Playlist

creating a playlist

150

editing a playlist

150

Powering off

10

Powering on

10

R

Receive messages in call

96

Receive text messages

90

Receiving PIX/FLIX

Messages

96

Removing battery

27

Reset phone

124

Restrict calls

130

Retrieving a Message

90

Return to last menu

54

Reviewing sent

100

Right soft key

20

Ringer ID

132

Roaming

options

37

230

Roaming indicator

23

S

Safe Use of your phone

192

Security

call restriction

130

edit lock code

123

lock phone

122

voice privacy

130

Security settings

121

Send key

21

Sent, reviewing messages

100

Set an alarm

177

Settings

109

backlight

116

banner

115

display settings

114

edit lock code

123

language

120

lock phone

122

resetting your phone

124

ringer settings

111

security settings

121

Shortcut to menus

54

Signal strength icon

22

Silent mode icon

24

Sketch messages

97

Snooze

179

Speakerphone Key

22

Speed dial, assigning

86

Standard Limited

Warranty

Standard Limited

Warranty

220

Store numbers, shortcuts

85

Storing numbers after a call

84

Sync Music

147

T

Take FLIX

161

Take PIX

155

Text messages, receiving

90

Tip

find a name

32

Tip, description

12

Tools

169

alarm

177

calculator

172

calendar

174

converter

173

note pad

180

stop watch

180

tip

173

view an event

176

world time

179

Travel Charger

28

TTY mode

38

Turning Your Phone On and Off

10

Two-second pause

78

231

U

Understanding Your

V

Phone

13

Back View

19

Closed View

17

display screen

22

features of your phone

14

Open View

15

V CAST Video

browsing/playing clips

152

configuring alerts

154

deleting clips

153

description

151

downloading clips

152

Vibrate mode icon

24

Video clips

151

View an event, calendar

176

View PIX Msg Later

97

Voice Call Icon

23

Voice mail

listening to

11

Voice mail icon

24

Voice privacy

130

Voicemail

105

Voicemail, viewing messages

106

VoiceSignal

description

44

digit dial

46

232 features

44

menu, speech recognition

39

name dial

45

name lookup

48

open apps

49

send message

47

settings

39

W

Warranty Information

219

World time

179

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents