Yamaha | YDS-12 | Owner`s manual | Yamaha YDS-12 Owner`s manual

English
YDS-12
Universal Dock for iPod
Dock Universal pour iPod
Français
Deutsch
Svenska
iPod 用ユニバーサルドック
Italiano
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Español
Nederlands
Русский
使用说明书
사용 설명서
中文
取扱説明書
한국어
日本語
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE : DO NOT
MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets
FCC requirements. Modifications not expressly
approved by Yamaha may void your authority,
granted by the FCC, to use the product.
Compliance with FCC regulations does not
guarantee that interference will not occur in all
installations. If this product is found to be the
source of interference, which can be determined
by turning the unit “OFF” and “ON”, please try to
eliminate the problem by using one of the
following measures:
2. IMPORTANT : When connecting this product
to accessories and/or another product use only
high quality shielded cables. Cable/s supplied
with this product MUST be used. Follow all
installation instructions. Failure to follow
instructions could void your FCC authorization
to use this product in the USA.
3. NOTE : This product has been tested and
found to comply with the requirements listed in
FCC Regulations, Part 15 for Class “B” digital
devices. Compliance with these requirements
provides a reasonable level of assurance that
your use of this product in a residential
environment will not result in harmful
interference with other electronic devices.
Relocate either this product or the device that is
being affected by the interference.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices.
Utilize power outlets that are on different
branch (circuit breaker or fuse) circuits or
install AC line filter/s.
In the case of radio or TV interference,
relocate/reorient the antenna. If the antenna
lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local
retailer authorized to distribute this type of
product. If you can not locate the appropriate
retailer, please contact Yamaha Electronics Corp.,
U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those
products distributed by Yamaha Corporation of
America or its subsidiaries.
COMPLIANCE INFORMATION STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1) This device may not cause harmful interface, and
2) This device must accept any interference received including interference that may cause undesired
operation of this device.
See user manual instructions if interference to radio reception is suspected.
i En
Informations de la FCC (Pour les clients résidents aux États-Unis)
1. AVIS IMPORTANT: NE PAS APPORTER
DE MOFIDICATIONS À CET APPAREIL !
Ce produit est conforme aux exigences de la
FCC s’il est installé selon les instructions du
mode d’emploi. Toute modification non
approuvée expressément par Yamaha peut
invalider l’autorisation, accordée par la FCC,
d’utiliser ce produit.
2. IMPORTANT: N’utiliser que des câbles
blindés de haute qualité pour le raccordement
de ce produit à des accessoires et/ou à un autre
produit. Seuls le ou les câbles fournis avec le
produit DOIVENT être utilisés. Suivre les
instructions concernant l’installation. Le non
respect des instructions peut invalider
l’autorisation, accordée par la FCC, d’utiliser
ce produit aux États-Unis.
3. REMARQUE: Ce produit a été testé et déclaré
conforme aux normes relatives aux appareils
numériques de Classe “B”, telles que fixées
dans l’Article 15 de la Réglementation FCC.
Ces normes sont destinées à assurer une
protection suffisante contre les interférences
nuisibles avec d’autres appareils électroniques
dans une installation résidentielle.
Cet équipement génère et utilise des fréquences
radio qui, en cas d’installation et d’utilisation non
conformes aux instructions du mode d’emploi,
peuvent être à l’origine d’interférences empêchant
d’autres appareils de fonctionner.
Cependant, la conformité à la Réglementation
FCC ne garantit pas l’absence d’interférences
dans une installation particulière. Si ce produit
devait produire des interférences, ce qui peut être
déterminé en “ÉTEIGNANT” et en
“RALLUMANT” le produit, l’utilisateur est
invité à essayer de corriger le problème d’une des
manières suivantes :
Réorienter ce produit ou le dispositif affecté
par les interférences.
Utiliser des prises d’alimentation branchées sur
différents circuits (avec interrupteur de circuit
ou fusible) ou installer un ou des filtres pour
ligne secteur.
Dans le cas d’interférences radio ou TV,
changer de place l’antenne et la réorienter. Si
l’antenne est un conducteur plat de 300 ohms,
remplacer ce câble par un câble de type
coaxial.
Si ces mesures ne donnent pas les résultats
escomptés, prière de contacter le détaillant local
autorisé à commercialiser ce type de produit. Si ce
n’est pas possible, prière de contacter Yamaha
Electronics Corp., États-Unis, 6660 Orangethorpe
Ave, Buena Park, CA 90620.
Les déclarations précédentes NE concernent QUE
les produits commercialisés par Yamaha
Corporation of America ou ses filiales.
INFORMATIONS CONCERNANT LA CONFORMITÉ
Cet appareil est conforme à l’article 15 de la Réglementation FCC.
Son fonctionnement est soumis aux deux conditions suivantes:
1) cet appareil ne doit pas causer d’interférences pernicieuses, et
2) cet appareil doit accepter toutes les interférences, y compris les interférences pouvant lui causer un
fonctionnement indésirable.
Se reporter au mode d’emploi si des interférences semblent perturber la réception radio.
ii Fr
Warranty policy for European Economic Area (EEA) and Switzerland,
Australia customer
In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from
whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in
your country. You can find full details on our website EEA and Switzerland: (http://www.yamahahifi.com/ or http://www.yamahauk.com/ for U.K. resident).
Australia: (http://www.yamahamusic.com.au/)
Information for Users on Collection and Disposal of Old Equipment
This symbol specified in the Directives 2002/96/EC indicates that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment to avoid harmful effect on human health and environment, please
contact your local municipality, your waste disposal service or the point of sale where you
purchased the items.
Conditions de garantie pour la Communauté économique
européenne (CEE) et la Suisse
Si votre produit Yamaha a besoin d’une réparation pendant sa période de garantie, veuillez contacter
votre revendeur. En cas de diffi culté, veuillez contacter le représentant Yamaha de votre pays. Vous
trouverez toutes les informations nécessaires sur notre site Web (CEE et Suisse) à l’adresse suivante :
(http://www. yamaha-hifi .com/ ou http://www.yamahauk.com/ pour les résidents au Royaume-Uni)
Information concernant la Collecte et le Traitement des piles Usagées
et des déchets d’équipements électriques et électroniques
Ce symbole, spécifi é dans la Directive 2002/96/CE, signifi e que les produits électriques
ou électroniques usagés ne doivent pas être mis au rebut avec les déchets ménagers. Pour
traiter ces équipements de manière appropriée, et éviter ainsi les eff ets néfastes sur la
santé humaine et sur l’environnement, contactez votre municipalité, votre service de
traitement des déchets ou le point de vente où vous avez acheté les produits.
iii En/Fr
■ Precautions
Read this before using this unit.
• To assure the finest performance, please read this manual carefully. Keep it in a safe
place for future reference.
• Install this unit in a cool, dry, clean place away from windows, heat sources, and
sources of excessive vibration, dust, moisture and cold. Avoid sources of humming
(transformers, motors, etc.). To prevent fire or electrical shock, do not expose this unit
to rain or water.
• To prevent the enclosure from warping or discoloring, do not place this unit where it
will be exposed to direct sunlight or excessive humidity.
• Do not place this unit where foreign objects such as water drips may fall. It may cause a
fire, or damage to this unit.
• Do not attempt to clean this unit with chemical solvents as this may damage the finish.
Use a clean, dry cloth.
• Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel
when any service is needed. The cabinet should never be opened for any reasons.
Secure placement or installation is the owner’s responsibility.
Yamaha shall not be liable for any accident caused by improper placement or installation
of this unit.
“Made for iPod” means that an electronic accessory has been designed to connect specifically
to iPod and has been certified by the developer to meet Apple performance standards.
“Works with iPhone” means that an electronic accessory has been designed to connect
specifically to iPhone and has been certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
i En
■ Introduction
With the Yamaha YDS-12 Universal Dock for iPod, you can play the content stored on your iPod
through a Yamaha dock-compatible audio component. Operation and functionality depends on
your iPod model and Yamaha dock-compatible audio component. See the owner’s manuals
supplied with your Yamaha dock-compatible audio component or iPod for details.
This unit is compatible with the iPod and iPhone. References in this manual to “iPod” also apply to
the iPhone.
As of April 2010, the following iPod models are compatible with this unit:
• iPhone
• iPod nano
• iPod touch
• iPod mini
• iPod (4th Gen/5th Gen/Classic)
iPod™, iPhone™
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
■ Package contents
Following items are included in the package. Make sure you have them all
(iPod or iPhone not included).
YDS-12 (Main unit)
iPod dock adapters (
Dock cable (2 m( 6.5 ft))
,
,
)
iPod with color display (20 GB
or 30 GB) or U2 Special Edition
•
•
•
•
iPod with color display
(40 GB or 60 GB) or iPod (40 GB)
iPod mini (4 GB or 6 GB)
The included iPod dock adapters are for use with iPod models that do not come with their own adapters.
If your iPod came with its own adapter, use it instead.
Each adapter has an identification letter ( , , or ) printed on its underside.
A dock adapter for the iPhone is not included. You’ll need to purchase one separately.
1 En
■ Controls and functions
1 iPod connector terminal
Connects your iPod.
2
2 Slits
3
Hold an iPod dock adapter.
3 Adapter holder
1
Holds an iPod dock adapter.
4 Dock cable terminal
Connects the supplied dock cable.
Upper side
5
5 Mode switch
4
Back side
Selects the mode (A or B) depending on
the Yamaha dock-compatible audio
component you connect to this unit.
See next page for details.
■ Inserting an iPod dock adapter
Insert the iPod dock adapter supplied with your iPod into the slot of the main unit. Depending
on the type of your iPod, you may need to insert one of the iPod dock adapters supplied with
this unit. See page 1 for details about the iPod dock adapter.
1. Insert the stoppers of the iPod dock
adapter into the slits on the slot of
this unit.
2. Insert the iPod dock adapter until it
snaps into the slot of this unit.
Slit
Stoppers
Slits
2 En
When you
remove the iPod
dock adapter
from this unit,
insert one of your
finger nails into
the slit on the
iPod dock
adapter and pull
it up.
■ Connecting the dock
1. Set the Mode switch to A (default).
If you’re using a Yamaha dockcompatible audio component sold in
2009 or before, set the Mode switch
to B.
3. Make sure the power of the dockcompatible audio component is
turned off.
Note
Connecting the dock connection cable while
the dock-compatible audio component’s
power is on could result in damage.
Mode switch
2009 or before
Default
4. Connect the other plug of the dock
cable to the DOCK jack of the dockcompatible audio component.
2. Connect one of the plugs of the dock
cable to the dock cable terminal of
this unit firmly.
DOCK
Note
Connect the plug
with the side with
the release button
facing upward.
Be sure to connect the plugs of the dock
cable firmly to both the dock cable terminal
of this unit and the DOCK jack of the dockcompatible audio component. When the
connection is loose, this unit may output
some unwanted noise.
3 En
■ Connecting your iPod
Insert the dock connector port of your
iPod into the iPod connector terminal of
this unit firmly.
Refer to the owner’s manual supplied with
your Yamaha dock-compatible audio
component or iPod for operating
information.
4 En
Note
• When this unit is connected with an
iPhone and placed near the Yamaha
dock-compatible audio component,
noise may occur. Place this unit away
from the Yamaha dock-compatible
audio component.
• Make sure that the output level of the
dock-compatible audio component is
set to minimum.
• To protect the dock connector from
damage, do not twist or sway back and
forth your iPod when inserting or taking it
off from this unit, and be careful not to
knock over this unit when your iPod is
inserted.
• Always use the correct iPod dock adapter
(this may be the one supplied with your
iPod, one supplied with this unit, or a
commercially available adapter). Using
this unit with the wrong iPod dock adapter
may result in a poor connection and
malfunction.
• Do not take off your iPod from this unit
when you play back the music, photo, or
movie stored on your iPod with the dockcompatible audio component.
• Connect your iPod without any other iPod
accessories (such as headphones, a wired
remote control, an FM transmitter etc.)
connected.
• It is recommended that you update your
iPod software before using it with this unit.
■ Disconnecting the dock cable
1. Make sure the power of the dockcompatible audio component is
turned off.
2. Press and hold the release button
and then pull off the plug of the dock
cable.
■ Troubleshooting
Refer to the items listed below when this
unit does not function properly.
• Make sure the Mode switch is set
appropriately for the Yamaha dockcompatible audio component you’ve
connected to the YDS-12.
• Connect your iPod to this unit firmly.
• Connect the dock cable to the dockcompatible audio component firmly.
• Connect the dock cable to this unit firmly.
• Update the software of your iPod to the
latest version.
Release button
If the instructions above do not help, refer to
the instructions of your iPod or dockcompatible audio component.
■ Specifications
Dimensions (W x H x D) ....... 89 x 37 x 86 mm
(3 1/2 x 1 1/2 x 3 3/8 in)
Weight .............................................................. 160g
(5.6 oz)
Note
Disconnecting the dock connection cable
while the dock-compatible audio
component’s power is on could result in
damage.
* Specifications are subject to change
without notice.
5 En
©2010 YAMAHA CORPORATION All rights reserved
Printed in China
WU92840
Download PDF

advertising