GREGG DISTRIBUTORS LTD. NEW PRODUCT SUPPLEMENT CATALOGUE 4 In this issue: CHAPIN® Backpack Sprayers ....................................................SP04-10 CHAPIN® EZ Mount & Tow Sprayers ..........................................SP04-12 CHAPIN® Hand Sprayers ........................................SP04-10 to SP04-11 CHAPIN® Handseeders ..............................................................SP04-12 CHAPIN® Industrial Sprayers ......................................SP04-6 to SP04-9 CHAPIN® Sprayer Replacement Parts and Accessories ............SP04-11 CHAPIN® Spreaders ...................................................................SP04-13 CHECKERS INDUSTRIAL Gorilla® Warning Whips ...................SP04-23 CLEAN-RITE® Wash Products .....................................................SP04-5 DEWALT 20V Cordless Power Tools ...........................SP04-3 to SP04-4 FLUKE Accessories ......................................................................SP04-4 FLUKE Thermal Imagers ..............................................................SP04-4 GORILLA GLUE Glue & Tape Products .......................................SP04-5 GRIP-N-GUARD® Masking Film .................................................SP04-22 HALDEX Piggyback Kits.............................................................SP04-27 LIFT SUPPORT Gas Spring Lift Supports ..................................SP04-24 LINK-BELT Chain Repair Tools ..................................................SP04-27 LLOYDS LABORATORIES Chemical Products.......SP04-20 to SP04-21 MECHANIX WEAR® Professional Gloves ..................................SP04-21 MÖLNLYCKE/TORK Paper & Hygiene Products .......................SP04-21 NAOKA INC. Safety Whips .........................................................SP04-23 NORSEMAN™ Canvas Belly Tarps ...........................................SP04-17 PHILIPS / SYLVANIA / GE / WAGNER HID Bulbs .....................SP04-17 PHILIPS / SYLVANIA / GE / WAGNER Halogen Bulbs - Carded.......SP04-17 PIUSI DEF Dispensing Products .............................SP04-18 to SP04-19 REVCO Flexible Couplings ........................................................SP04-27 REVCO Jaw Couplings ..............................................................SP04-26 REVCO Sprockets ...................................................SP04-25 to SP04-26 REVCO Taper Bushings .............................................................SP04-26 RIDGID® Submersible Sump Pumps .......................SP04-14 to SP04-15 SLIP-N-GRIP® Vehicle Service Products....................................SP04-22 TECHSPAN Deutsch Connectors...............................................SP04-27 TEK Optical Universal Sideshields for Safety Frames ...............SP04-24 TIGER TOOL Heavy Duty Truck Tools .........................................SP04-2 TRIMACO Masking Products ..................................SP04-16 to SP04-17 WIRE Rope Clips........................................................................SP04-15 TIGER TOOL L TIG/3812 Heavy Duty Truck Tools SNAP RING PLIERS •Uniquely designed jaw easily removes and replaces Hotchkiss style snap rings on even the most corroded u-joints •Can also be used to remove plastic (push-pin) retainers on many makes and models of vehicles •The 75° head on the #70301 is designed to provide a secondary option to access those hard-toreach areas Part No. 70300, Straight head. Part No. 70301, 75° head. KING PIN PRESS KIT •Designed for use on straight and tapered king pins from 7/8” to 2-5/32” •Generates over 46,000 lbs of force and weighs only 30 lbs •User friendly design requires just one person to operate Part No. 90150. LEAF SPRING PIN SOCKETS •Remove and install even the most stubborn threaded leaf spring and shackle pins Part No. 15101, International/Kenworth (small), 1.10” x .647”. Part No. 15102, International/Kenworth (medium),1.13” x .750”. Part No. 15100, International/Kenworth (large),1.54” x .653”. Part No. 15104, Western Star (x-large), 1.46” x 1.26”. Part No. 15103, Volvo/Mack and shackle pins, .945” x .355”. 15101/15102/15100/15104 PIN & BUSHING CORE KIT •Removes and installs both rubber-isolated and threaded pins and bushings without removing the spring packs from the axle •The hydraulic cylinder creates 20 tons of pulling power for quiet, smooth operation •Service time can be reduced by up to 70% on most jobs •Requires 10,000 psi hydraulic power source Part No. 15000. CORE KIT ONLY. This kit requires one or more of the adapter kits listed to the right. 15103 ADAPTER KITS FOR #15000 •Select an add-on kit that corresponds with the OEM bushing adapter Part No. Application FRONT SUSPENSION 15004 Kenworth Pin and Bushing #5296, #5295 15005 Kenworth Pin and Bushing #B13-1002, B65-1008, B65-6008, B13-1000 15006 Kenworth Pin and Bushing #B65-1001 15007 Kenworth and Peterbilt Pin and Bushing #B65-6005 15008 Kenworth Pin and Bushing #B65-1012 15009 Kenworth Pin and Bushing #B65-1006 15010 Peterbilt #02-01805 and International #1065H, 1680034C1, 44409C1 15011 Kenworth and Peterbilt Pin and Bushing #B65-1013 15015 Mack Pin and Bushing #10QK254M2 15031 Freightliner and Sterling Pin and Bushing #16-14603-000 15032 Freightliner Bushing #680-322-01-50 REAR SUSPENSION 15012 Peterbilt Air Trac Pin and Bushing 15030 Freightliner Airliner and Peterbilt Low Air Leaf Pin and Bushing TRAILER SUSPENSION 15040 Hendrickson Tri-Functional Wide (Intraax) Bushing 15041 Hendrickson Tri-Functional Narrow (Vantraax) Bushing 15050 Meritor Tri-Functional Bushing UNIVERSAL & 5TH WHEEL ADAPTER 15003 Universal Through-Hole Bushing 15060 5th Wheel Bracket Pin Puller 15007 15030 WHEEL STUD REMOVER & INSTALLER •Designed for use on inboard hubs on trucks and buses •Includes a 10 ton hydraulic cylinder to provide effective removal of even the most seized studs in 10 to 15 minutes •Removal of the hub is not required Part No. 10608. Part No. 10611, Manual version. PITMAN ARM PULLER •Designed to remove pitman arms on Sheppard M100 gearboxes •Can be used with up to a 3/4” impact wrench •Max glove opening is 4.1” Part No. 10385. PITMAN ARM PULLER •Designed to remove pitman arms on Sheppard M110 gearboxes •May be used with up to a 3/4” impact wrench Part No. 10389. HUB SPINDLE NUT SOCKET •Provides a safe way to remove the 8 point spindle nut •Machined from heat treated alloy steel to prevent the socket from slipping or spinning under extreme loads •3-1/4” socket with 3/4” drive Part No. 18010. 15040 HUB PULLER •Designed to remove the most stubborn hubs with up to 25,000 lbs of force Part No. 10901, Removes Fruehauf hubs. Part No. 10902, Removes Rockwell hubs. 10901 ENERPAC® 10,000 PSI HYDRAULIC PUMP •Xvari® technology enables the user to better control the hydraulic application, improving productivity •Ergonomic design reduces operator fatigue •Closed hydraulic system prevents contamination and allows pump usage in any position Part No. 70126. SP04-2 GREGG DISTRIBUTORS LTD. DEWALT DEW/1766/1768 20V Cordless Power Tools 2 20V MAX XR LITHIUM ION BRUSHLESS PREMIUM 3-SPEED DRILL / DRIVER KIT •DEWALT-built high power, high efficiency brushless motor--650 unit watts out (UWO) max power for superior drilling and fastening applications performance--delivers up to 57% more run time over brushed •3-speed, high performance (0-2,000 RPM) all-metal transmission optimizes tool-to-task for fast application speeds and improved run time •Compact size - 7.9” front-to-back length and lightweight 4.6 lbs. fits tight areas •Heavy-duty 1/2” metal ratcheting chuck with carbide inserts for superior bit gripping strength •LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces, improved LED tool placement minimizes chuck shadows •Includes: 1/2” Drill/Driver, (2) 20V MAX* XR High Capacity Li-Ion Batteries, Fast charger, Belt hook, On-board bit holder, 360° side handle, and Kit box Part No. DCD990M2. Specifications Voltage: 20V MAX # of Speed Settings: 3 Max rpm: 2,000 Clutch Settings: 11 Chuck Size: 1/2" Chuck Type: Metal, ratcheting No Load Speed: 0-450 / 0-1,300 / 0-2,000rpm Tool Weight: 4.6 lbs Tool Length: 7.9" •DEWALT brushless motor delivers up to 57% more run time over brushed •3 Speed Design; application specific control •Push Button Chuck; one handed operation for accessory changes •Compact (5.25” front to back), lightweight design (3.6 lbs.); fits into tight areas •Includes: 1/4” Impact Driver, (2) 20V Max XR Premium Li-Ion Batteries, Fast Charger, Belt Hook and Accessory Storage, and Kit box Part No. DCF895M2. Part No. DCF895B, Tool only. 20V MAX LITHIUM ION LED WORK LIGHT •Bright LED output - 110 Lumens •Integral hook for hands free use in multiple placements •Head rotates 120° •Low heat output compared to Xenon lights •Efficient LED bulb improves run-time Part No. DCL040. •DEWALT-built high power, high efficiency brushless motor - 650 unit watts out (UWO) max power for superior drilling and fastening applications performance--delivers up to 57% more run time over brushed •3-speed, high performance (0-2,000 RPM) all-metal transmission optimizes tool-to-task for fast application speeds and improved run time •0-34,000 BPM for fast drilling in masonry materials •Compact size--8.4” front-to-back length & lightweight 4.7 lb--fits tight areas •Heavy-duty 1/2” metal ratcheting chuck with carbide inserts for superior bit gripping strength •LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces, improved LED tool placement minimizes chuck shadows •Includes: 1/2” Hammerdrill, (2) 20V MAX XR High Capacity Li-Ion Batteries, Fast charger, Belt hook, On-board bit holder, 360° side handle, and Kit box Part No. DCD995M2. Part No. DCD995B, Tool only. Specifications Voltage: 20V MAX # of Speed Settings: 3 Max rpm: 0-450 / 0-1,300 / 0-2,000 Max BPM: 0-7,650 / 0-22,100 / 0-34,000 Clutch Settings: 11 Chuck Size: 1/2” Chuck Type: Metal, ratcheting Tool Weight: 4.7 lbs 20V MAX XR LITHIUM ION BRUSHLESS 3-SPEED 1/4” IMPACT DRIVER Specifications Voltage: 20V MAX Drive Size: 1/4" Hex Anvil Type: Quick Release No Load Speed: 0 - 2850 / 1900 / 950rpm Impacts/Min: 0 - 3300 / 2400 / 1300ipm Max Torque (in-lbs): 1500 / 900 / 500in-lbs Max Torque (ft-lbs): 125 / 75 / 42ft-lbs Tool Length: 5-1/4" Tool Weight: 3.6 lbs 20V MAX* XR LITHIUM ION BRUSHLESS PREMIUM 3-SPEED HAMMERDRILL KIT 20V MAX LITHIUM ION GREASE GUN •Powerful motor delivers 10,000 max psi to power through clogged grease fittings •High-volume pump pushes up to 5.0 oz/min for high-flow applications •Up to 16 cartridges per charge with a single DEWALT 20V MAX Battery (4.0 Ah) •Variable speed trigger offers precise control of the grease flow •42” extra-long and flexible hose designed for reaching hard to access grease fittings. •Bright LED light assists in locating hard to see grease fittings in low-light situations •Innovative pump filter screen prevents dirt and contamination from clogging the pump mechanism •Integrated no-mar foot design allows operators to rest the tool on flat surfaces •Air-bleeder valve assists in pump priming after cartridge changes •Includes: Grease gun, 20V MAX XR Premium Li-Ion Battery, Fast charger, Shoulder strap, and Kit box Part No. DCGG571M1. Part No. DCGG571B, Tool only. Specifications Voltage: 20V MAX Max Volume: 5.0 oz/min Hose Length: 42” Cartridge Capacity: 14.5 oz Bulk Capacity: 16.0oz Tool Weight: 9.5 lbs. 12V/20V MAX WORKSITE CHARGER RADIO •2 AMP Charger for 12V Max & 20V Max DEWALT Battery Packs allows for quick and convenient battery charging •Runs off 12V Max and 20V Max DEWALT batteries making it a cordless radio capable or running off rechargeable and reusable battery power •2 AC Power Outlets offer more versatility for jobsite power •Auxiliary and USB Ports allows for connection to CD, MP3, Portable Satellite Receivers, and other digital audio devices •USB port allows device to be charged via USB when radio is plugged into a wall outlet •Device storage box protects electronic devices from jobsite debris while plugged into Aux or USB ports •Class D amplifier, woofers and tweeters provide full range of high and low sound for optimum sound quality Part No. DCR015. 18/20V MAX* CORDLESS/CORDED WETDRY VACUUM •Cordless or corded operation powered by either an 18v or 20v MAX battery - or an AC outlet •HEPA rated wet/dry filter traps dust with 99.97% efficiency at 1 micron •Easily accessible, washable/reusable filter; Tap or water rinse to clean •Heavy-duty, crush-resistant, fullyintegrated 5’ (by 1-1/4” diameter) hose provides durability, flexibility and ease-of-use •On-board hose, cord and accessory storage makes the vacuum easy to carry/transport •2-Gallon tank capacity provides enough storage to empty a toilet or clogged pipe Part No. DCV581H. Part No. DCV5801H, Replacement HEPA Filter. www.greggdistributors.ca SP04-3 DEWALT DEW/1768 20V Cordless Power Toolss 12V MAX - 20V MAX LITHIUM ION BATTERY CHARGER •Charges all DEWALT® 12V - 20V MAX Li-Ion batteries •Charges the battery in 1 hour or less thus minimizing downtime •Diagnostics with LED indicator communicates battery charge status: charged, charging, replace pack, and battery too hot or too cold Part No. DCB101. 12V MAX - 20V MAX LITHIUM ION VEHICLE BATTERY CHARGER •Charges all DEWALT® 12V - 20V MAX Li-Ion batteries from a vehicle’s power outlet enabling batteries to be charged while driving to work or on a jobsite •Quickly charges batteries to minimize down time •Automatic shut-off protects excessive discharge of vehicle’s battery •Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold Part No. DCB119. 20V MAX PREMIUM 4.0 Ah XR LITHIUM ION BATTERY PACK •Premium XR Lithium Ion High Capacity Battery pack provides up to 33% more capacity than standard 20V MAX* battery packs •3-LED Fuel Gauge System allows immediate feedback on state of charge •No memory and virtually no self-discharge for maximum productivity and less downtime •Weighs 1.42 lbs allowing user maximum run-time in a lightweight battery Part No. DCB204. Part No. DCB204-2, Pack of 2. FLUKE FLK/2265 Thermal Imagers Ti90 INFRARED CAMERA MERA Start finding potential problems fast with the affordable wireless Ti90 infrared camera - securely connect and collaborate with others, so they can see what you see. •The only wireless industrial infrared camera in its price class – take advantage of the benefits of Fluke Connect™ by seamlessly gathering and sharing inspection results instantly •Superior image quality, up to 84% better spatial resolution than other competitive models in this price class •80 x 60 resolution •Removable 4GB SD memory card •8 GB Fluke Connect™ wireless SD Card •Get context for the infrared image by switching to the full visible (IR-Fusion® AutoBlend™ mode and Picturein-Picture available in SmartView® software) •2 megapixel built-in digital camera •3.5” LCD •Smart Battery System - Lithium ion smart battery pack with five-segment LED display to show charge level •Rugged, lightweight, point– and–shoot infrared camera Part No. TI90-9. DMM Accessories REPLACEMENT FUSES •Replacement fuses for Fluke DMMs Part No. 943121, 440mA 1000V fuse. Part No. 803293, 11A 1000V fuse. 27 (S/N>7247001) 83/85/87 (S/N>6565000) 83-III/85-III/87-III 87-IV/89-IV/187-IV/189/287/289/77-III/79-III/23-III/26-III 175/177/179/77-IV/27-II/28-II 111/112/115/117/233 1577/1587 787/789 SP04-4 GREGG DISTRIBUTORS LTD. Wireless with superior image quality, easy-to-use and rugged, the Ti95 infrared camera was designed for your next thermal inspection. •The only wireless industrial infrared camera in its price class – take advantage of the benefits of Fluke Connect™ by seamlessly gathering and sharing inspection results instantly •Superior image quality, up to 23% better spatial resolution than other competitive models in this price class •80 x 80 resolution •Removable 4GB SD memory card •8 GB Fluke Connect™ wireless SD Card •Find potential problems faster and easier with IR-Fusion® picture-in-picture mode •2 megapixel built-in digital camera •3.5” LCD •Smart Battery System - Lithium ion smart battery pack with five-segment LED display to show charge level •Rugged, lightweight, point–and–shoot infrared camera Part No. TI95-9. Specifications: Infrared spectral band 9 μm to 15 μm (long wave) Operating temperature -10°C to 50°C Center box (MIN-MAX-AVG): Fixed-size measurement box with MIN-MAX-AVG temp Temperature Range: -20°C to 250°C Spatial Resolution: 5.6 mRAD Thermal Resolution: 80 x 80 Field of View: 26°H x 26°V Thermal Sensitivity: 100 mK Drop: Engineered to withstand 2 meter (6.5 feet) drop Size: 11.2”H x 3.4”W x 5.3”L Weight (battery included) 1.6 lb Enclosure rating: IP54 Specifications: Infrared spectral band: 9 μm to 15 μm (long wave) Operating temperature: -10°C to 50°C Temperature Range: -20°C to 250°C Spatial Resolution: 5.6 mRAD Thermal Resolution: 80 x 60 Field of View: 19.5°H x 26°V Thermal Sensitivity: 150 mK Drop: Engineered to withstand 2 meter (6.5 feet) drop Size: 11.2”H x 3.4”W x 5.3”L Weight (battery included): 1.6 lb Enclosure rating: IP54 Model Ti95 INFRARED CAMERA Fuse Requirements 943121, 803293 943121, 803293 943121, 803293 803293 943121 943121 GORILLA GLUE III/3799 Glue & Tape Products GORILLA GLUE GORILLA WOOD GLUE GORILLA SUPER GLUE Specifications: •Clamp Time: 20-30 Minutes •Open Time: 5-10 Minutes •Dry Time: 80% in 1-2 Hours •Dry Colour: Natural Wood Colour •Full Cure: 24 Hours Specifications: •Clamp Time: 10-30 Seconds •Open Time: Not Repositioning •Dry Time: Light Handling after 1-5 MinutesDry Color: Translucent •Full Cure: 24 Hours GORILLA GLUE WHITE GORILLA EPOXY GORILLA TAPE Specifications: •Clamp Time: 30-60 Minutes •Open Time: 5-10 Minutes •Dry Time: 80% in 1-2 Hours •Dry Color: Soft White •Full Cure: 24 Hours Specifications: •Clamp Time: 30 Minutes •Open Time: 5 Minutes •Dry/Full cure Time: 24 Hours •Dry Color: Clear GORILLA TOUGH & WIDE TAPE GORILLA TAPE WHITE The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. Water activated, it expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is your solution for almost any project or repair. It’s 100% waterproof, safe for indoor and outdoor use and strong enough to stand up to the elements. Plus, its expansion allows it to penetrate the glued surface for a superior bond. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth. Part No. 5100502, 4 pack of 3 g single use tubes. Part No. 5100201, 59 ml bottle. Part No. 5100402, 118 ml. bottle. Part No. 51008T, 236 ml bottle. Specifications: •Clamp Time: 1-2 Hours •Open Time: 10-15 Minutes •Dry Time: 80% in 1-2 Hours •Dry Colour: Light Tan •Full Cure: 24 Hours Gorilla Wood Glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. The glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects. Part No. 6212001, 118 ml bottle. Part No. 6200201, 236 ml bottle. Part No. 6205201, 532 ml bottle. Gorilla takes epoxy to a new level—the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy is incredibly strong and durable for household and automotive repairs alike. The easy-touse syringe keeps the resin and hardener separate, so it is easy to dispense and won’t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless. Part No. 4200601, 25 ml bottle. The same serious strength you expect from Original Gorilla Glue, in a dries white, faster formula. Whether indoors or out, White Gorilla Glue is 100% waterproof, resistant to extreme heat and cold, and easily bonds foam, wood, metal, ceramic, stone and much more! Storage Tips: White Gorilla Glue is a moisture activated adhesive. It is important to replace the cap tightly, and store in a cool, dry place. You should expect a year shelf life. Part No. 5202101C, 59 ml bottle. Part No. 5202403, 21.2 g Precision pen. Similar to Gorilla Tape, only bigger and tougher, Gorilla Tape Tough and Wide covers more surface area and creates a stronger bond for your tough tape-ups. Part No. 6003001, 3” x 30 yds. White Gorilla Tape offers over-the-top results with its triple-layer strength and outstanding versatility. It is perfect for both indoor and outdoor use with superior UV resistance and ability to grip to rough, uneven, unforgiving surfaces like wood, stone, stucco, plaster, brick and more. Part No. 6025001, 2” x 30 yds. Its high strength and quick set time make Gorilla Super Glue the go-to for a variety of household projects. Developed for long-lasting repairs in an instant, Gorilla Super Glue dries in 10–30 seconds and is reinforced with rubber forr increased impact resistance. We call it ImpactTough® because it stands up to wear and tear unlike any other instant glue. In addition to its high-performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Part No. 7900301, 2 pack of 3 g tube. Part No. 7805201, 20 g bottle. Gorilla Tape has taken duct tape to a new level. Gorilla Tape’s toughness surpasses ordinary tapes, making the list of uses virtually endless. It sticks to rough and uneven surfaces, including wood, stone, stucco and brick, that ordinary tapes can’t hold. To us, it’s made the way tape should be: The Toughest on Planet Earth. Part No. 6101002, 1” x 30 ft. To-Go. Part No. 61012, 2” x 12 yds. Part No. 60036, 2” x 35 yds. GORILLA CLEAR REPAIR TAPE No other tape offers the clarity, strength and durability of Gorilla Clear Repair! The ideal solution for almost any repair, Gorilla Clear Repair features the strength of Gorilla Tape in a weatherproof, airtight, crystal-clear tape. Easy to tear by hand, with Gorilla Clear Repair, you can fix, patch, seal, hold and protect almost any surface with a crystal-clear appearance for a perfect fix every time. Part No. 6127002, 2” x 27 ft. CLEAN-RITE® QQQ/1980 Wash Products MICROFIBER GLASS TOWEL with FINGER POCKET •Soft lint and streak free •Cleans dirt and greasy fingerprints from glass •Towel Size: 12” x 16” Part No. 3-511, Pack of 2. MICROFIBER CLEANING TOWELS •Microfiber towels - blue •12 towels per pack •Towel size: 14” x 14” Part No. 3-512. MICROFIBER CLEANING CLOTHS •Clean without chemicals, great for dashboards, computer screens, glass mirrors and more •12” x 16 Part No. 3-606, Pack of 6. MICROFIBER 2N1 WASH & SCRUB SPONGE •Plush microfiber cleans away dirt and grime •Microfiber mesh scrubs away tough dirt Part No. 9-21M. www.greggdistributors.ca SP04-5 CHAPIN® CHP/1633 Industrial Sprayerss XTREME™ INDUSTRIAL INDUSTRIAL CONCRETE CONCRETE SPRAYER WITH SPRAYER WITH DRIPLESS DRIPLESS SHUT-OFF SHUT-OFF XTREME™ INDUSTRIAL CONCRETE SPRAYER •3.5 Gallon tripoxy coated sprayer with xtreme™ seals and dripless trigger grip shutoff for the concrete professional •Xtreme™ viton® seals and gaskets •Tripoxy steel tank with large tri-lock opening •Spray handle, brass wand and nozzle •Brass pump Part No. 19249. •3.5 Gallon tripoxy coated sprayer with viton® seals for the concrete professional •Viton® seals and gaskets •Tripoxy steel tank with large tri-lock opening •Spray handle, brass wand and nozzle •Brass pump Part No. 19149. STAINLESS STEEL XTREME™ INDUSTRIAL CONCRETE SPRAYER INDUSTRIAL VITON® CONCRETE OPEN HEAD SPRAYER WITH FILTER INDUSTRIAL VITON® CONCRETE SPRAYER COMPRESSOR CHARGED •3.5 Gallon stainless steel sprayer with xtreme™ seals for the concrete professional •Xtreme™ viton® seals and gaskets •Stainless steel tank with large tri-lock opening •Brass spray handle, 24” wand and nozzle •Brass Pump Part No. 19069. •3.5 Gallon tripoxy coated sprayer with viton™ seals for the concrete professional •Viton® seals and gaskets •Tripoxy steel tank with large tri-lock opening •Brass spray handle, 24” wand and nozzle •Brass pump Part No. 1979. •3.5 Gallon tripoxy coated sprayer with xtreme™ seals for the concrete professional •Xtreme™ viton® seals and gaskets •Tripoxy steel tank with large tri-lock opening •Brass spray handle, 24” wand and nozzle •Brass pump Part No. 19049. •3.5 Gallon hammertone / tripoxy coated sprayer with viton™ seals and schreader valve for compressor hookup for the concrete professional •Viton® seals and gaskets •Schreader valve for compressor hook up •Brass spray handle, 24” wand and nozzle •Brass pump Part No. 1999. INDUSTRIAL VITON® CONCRETE OPEN HEAD SPRAYER •3.5 Gallon tripoxy coated sprayer with viton™ seals for the concrete professional (chapin’s most popular industrial sprayer) •Viton® seals and gaskets •Tripoxy steel tank with large tri-lock opening •Brass spray handle, 24” wand and nozzle •Brass pump Part No. 1949. INDUSTRIAL VITON CONCRETE FUNNEL TOP SPRAYER •3.5 Gallon tripoxy coated funnel top sprayer with viton™ seals for the concrete professional •Funnel top design •Viton™ seals •Brass spray handle, 24” wand and nozzle •Metal pump handle •Funnel top for easy filling Part No. 1449. Pressure Fitting INDUSTRIAL WATER SUPPLY TANK •3.5 gallon poly water supply tank and pump •Poly tank sprayer •Viton™ seals •Ergo “comfort” handle •Water tank used for cutting tools; hose adapter Part No. 4163. INDUSTRIAL POLY WATER SUPPLY TANK •3 gallon water supply tank, great for lawn and garden use •Made of polyethylene •Pump length: 8” with a 3.5” wide mouth opening - includes filter Part No. 41330. Hose Adapter SP04-6 GREGG DISTRIBUTORS LTD. Hose Adapter Chapin Industrial Concrete sprayers are equipped with Viton® seals and gaskets to handle the many aggressive chemicals used by professionals. To keep up with the ever changing chemical compositions and the higher solids in today’s solvents and excellerators, select Chapin Industrial concrete sprayers are equiped with Xtreme® seals and gaskets that are resistant to the most extreme chemicals and high concentrations of Acetone®, Naphtha®, Xylene® and Toluene®. These models display the large X on the tank CHAPIN® CHP/1633 Industrial, Heavy Duty & General Duty Sprayers In INDUSTRIAL STAINLESS STEEL SPRAYER •3.0 Gallon stainless steel industrial sprayer with tri-lock opening •Stainless steel tank •Large tri-lock opening •Brass spray handle, 18” wand and nozzle •Brass pump Part No. 1749. INDUSTRIAL OPEN HEAD GENERAL DUTY SPRAYER •3.5 Gallon tripoxy coated sprayer with viton™ seals for the concrete professional •Viton® seals and gaskets •Tripoxy steel tank with large tri-lock opening •Brass spray handle, 24” wand and nozzle •Brass pump Part No. 1941. INDUSTRIAL POLY CONCRETE SPRAYER - XP MODEL •3.0 Gallon industrial concrete poly sprayer for form oils, curing compounds and sealers. Now with 40% more pump volume per stroke. •Brass shut-off with lock-on feature •18” Brass extension wand •Pressure relief valve Part No. 22170XP. INDUSTRIAL POLY VITON® HEAVY DUTY SPRAYER XP MODEL •3.0 gallon industrial poly sprayer for multipurpose use. Now with 40% more pump volume per stroke. •Viton® seals and gaskets •Brass shut-off with lock-on feature •18” Brass extension wand •Pressure relief valve Part No. 22790XP. INDUSTRIAL STAINLESS STEEL SPRAYER •2.0 Gallon stainless steel industrial sprayer with tri-lock opening •Stainless steel tank •Large tri-lock opening •Brass spray handle, 12” wand and nozzle •Brass pump Part No. 1739. INDUSTRIAL OPEN HEAD GENERAL DUTY SPRAYER •3.0 Gallon tripoxy industrial sprayer with tri-lock opening •Tripoxy coated metal tank •Large tri-lock opening •Brass spray handle, 18” wand and nozzle •Brass pump Part No. 1831. INDUSTRIAL METAL VITON® HEAVY DUTY SPRAYER •3.0 Gallon tripoxy coated funnel top heavy duty sprayer with viton™ seals for the concrete professional •Tripoxy coated metal tank •Surespray™ anti-clog filter •Brass spray handle, wand and nozzle •Funnel top for easy filling Part No. 1352. INDUSTRIAL POLY XTREME® SPRAYER - XP MODEL •3.0 Gallon poly xtreme™ concrete sprayer resistant to the most extreme chemicals and high concentrations of acetone®, naphtha®, xylene® and toluene®. Now with 40% more pump volume per stroke. •Xtreme™ viton® seals and gaskets •Translucent 3.0 Gallon poly tank •Brass spray handle, 24” wand and nozzle Part No. 22049XP. INDUSTRIAL POLY VITON® CONCRETE SPRAYER - XP MODEL •3.0 Gallon poly sprayer with viton® seals for the concrete professional. Now with 40% more pump volume per stroke. •Viton® seals and gaskets •Brass shut-off with lock-on feature •24” Brass extension wand •Pressure relief valve Part No. 22180XP. INDUSTRIAL POLY HEAVY DUTY SPRAYER - XP MODEL •3.0 gallon Industrial Heavy Duty Poly Sprayer for general purpose professional use. Now with 40% more pump volume per stroke. •Brass shut-off with lock-on feature •18” brass extension wand •Pressure relief valve Part No. 22090XP. www.greggdistributors.ca SP04-7 CHAPIN® CHP/1633 Industrial Sprayerss INDUSTRIAL ACID STAINING SPRAYER WITH DRIPLESS SHUT-OFF - XP MODEL INDUSTRIAL ACID STAINING SPRAYERS - XP MODEL ACETONE SPRAYER BLEACH AND BLEACH SPRAYER DISINFECTANT BACKPACK •1 gallon bleach sprayer for cleaning and remediation SPRAYER •Acid staining sprayer with COPT seals for the decorative concrete professional. Now with 40% more pump volume per stroke. •COPT seals and gaskets to handle acid based concrete stains •Translucent poly tank •2 Gallon acid staining sprayer with COPT •Curved poly wand seals and dripless shut-off for the decorative •Ceramic nozzle, die cast metal pump handles, a wide 4” opening concrete professional. Now with 40% more •Pressure relief valve pump volume per stroke. •Funnel top for easy filling •COPT seals and gaskets to handle acid based Part No. 22240XP, 2 Gallon. concrete stains Part No. 22230XP, 1 Gallon. •Translucent 2 Gallon poly tank •Ceramic nozzle, die cast metal pump handles, a wide 4” opening •Pressure relief valve •Dripless shut-off Part No. 22251XP. •2 gallon acetone sprayer for the decorative concrete professional staining with acetone base dyes •EPDM seals and gaskets to handle high concentrations of acetone •Pressure relief valve •Surespray™ anti-clog filter •Adjustable ceramic cone nozzle Part No. 26127. •4 gallon backpack sprayer with pro features for the cleaning with bleach solutions •Viton™ seals •4 Stage filtration system (with in-tank removable/cleanable filter) •4” Wide opening with strainer/filter basket •Padded shoulder straps •Poly cone nozzle Part No. 61575. PROFESSIONAL PEST CONTROL SPRAYERS •1.5 gallon stainless steel tank with tri-lock opening •Dripless Shut-Off •Viton™ seals •Large 4” opening for easy filling and cleaning Part No. 10800, Adjustable, multi pattern spray nozzle. Part No. 10700, Poly fan nozzle. SP04-8 GREGG DISTRIBUTORS LTD. ACETONE SPRAYER WITH DRIPLESS SHUT-OFF - XP MODEL •3 Gallon acetone sprayer with dripless trigger grip shut-off for concrete staining applications requiring acetone. Now with 40% more pump volume per stroke. •Dripless trigger grip shut-off for no-drip applications with xtreme™ viton® seals •EPDM seals and gaskets to handle high concentration of acetone •Funnel top for easy filling •Pressure release valve Part No. 21127XP. •SureSpray™ Anti-clog Filter •Translucent Tank •Adjustable cone nozzle •Ergo poly pump handle •Funnel top for easy filling Part No. 20075. JANITORIAL FOAMER/SANITATION SPRAYERS •Poly foamer/sprayer - 2 in 1 dual sprayer foamer •Auto/manual high pressure relief valve •Foam nozzle sprays a consistent foam for cleaning applications •Adjustable poly cone nozzle sprays coarse stream to fine spray •Large ergonomic pump handle •Funnel top design •Lock-on shut-off feature •Viton™ seals Part No. 2660E, 3 gallon. Part No. 2659E, 2 gallon. Part No. 2658E, 1 gallon. CHAPIN® CHP/1634 Sprayers PREMIER STAINLESS STEEL SPRAYER PREMIER STEEL SPRAYERS •2.0 Gallon premier series funnel top stainless steel sprayer home, yard and garden use •Stainless steel tank •Surespray™ anti-clog filter •Brass spray handle, wand and nozzle •Funnel top for easy filling Part No. 1253. •Premier series funnel top steel sprayer home, yard and garden use •Tripoxy coated metal tank •Surespray™ anti-clog filter •Brass wand and brass adjustable nozzle •Epoxy coated zinc shut off •Funnel top for easy filling Part No. 1380, 3 gallon with 18” wand. Part No. 1280, 2 gallon with 12” wand. Part No. 1180, 1 gallon with 12” wand. SURESPRAY™ SPRAYERS PREMIER XP POLY SPRAYERS POLY PRO SERIES SPRAYERS - XP MODEL CLEAN ‘N SEAL DECK POLY SPRAYER •Surespray™ multi-purpose sprayer for herbicides, pesticides, fertilizers and general cleaning •Clean’n easy™ design •Surespray™ anti-clog filter •Adjustable nozzle with reinforced hose •Translucent tank •Ergonomic pump handle •Funnel top for easy filling •Measure cup for dry hands mixing-stores easily on tank Part No. 20030, 3 gallon. Part No. 20020, 2 gallon. Part No. 20010, 1 gallon. Part No. 10000, .5 gallon. •Pro Series poly sprayer for the lawn & landscaping professional. Now with 40% more pump volume per stroke. •Viton® seals and gaskets •4” large opening for easy filling •Includes comfort grip handle, along with poly and brass adjustable nozzle •20” poly wand and 34” reinforced hose with cushion grip shut-off with internal filter •Includes SureSpray® Anti-Clog Filter •Pressure relief valve Part No. 26031XP, 3 gallon. Part No. 26021XP, 2 gallon. •Premier wide mouth poly sprayer with extended performance - now with 40% pump volume per stroke •Die cast pump handle •Surespray™ anti-clog filter •Adjustable brass nozzle with viton™ gasket •Pressure release valve •Epoxy coated zinc shut-off with 18 inch brass extension wand Part No. 21230XP, 3 gallon. Part No. 21220XP, 2 gallon. Part No. 21210XP, 1 gallon. STAND ‘N SPRAY SPRAYER •2 gallon clean ‘n seal poly sprayer for spraying transparent/semitransparent stains and sealants. •Funnel top opening for no mess filling •3 Fan nozzles: 1/4 GPM - fine spray for washes, 1/3 GPM - medium spray for sealers, 1/2 GPM - course spray for semi transparent stains •Spray shield to control overspray •Locking spray handle for ease of spraying •Poly curved wand & reinforced hose •Ergo style pump handle Part No. 25020. •Sprayer with external pump barrel allowing user to pump in an upright position •External pump with Nitrile seals and gaskets •SureSpray™ Anti-clog Filter •Translucent poly tank •18” wand for NO-BEND spraying •Built in splash guard to protect against spillage •Pressure release valve Part No. 29003, 3 gallon. Part No. 29002, 2 gallon. www.greggdistributors.ca SP04-9 CHAPIN® CHP/1634/1635/1637 Backpack Sprayerss PRO TREE/TURF BACKPACK SPRAYER •4 gallon backpack sprayer with deluxe features for the landscape & turf professional •Piston pump •4 stage filtration system with in-tank removable/cleanable filter •Pressure regulator valve (30-80psi) •Viton™ seals and gaskets •Chrome pump handle for left or right handed operation •Adjustable/cushioned shoulder, back and lumbar straps •3 pc nozzle pack (poly fan, poly cone and brass cone) •CF valve™ included (21 PSI) •Brass spray handle with air pressure gauge •Brass extension wand •48” clear reinforced hose Part No. 62000B. PRO TREE/TURF BACKPACK SPRAYER •4 gallon backpack sprayer with deluxe features for the landscape & turf professional •Piston pump •4” large diameter opening •Strainer/filter basket •Removable in tank filter •Cushion grip spray handle with pressure gauge •Adjustable padded shoulder straps with lumbar support strap •3 pc nozzle pack (poly fan, poly cone and brass fan) •Stainless steel wand •Adjustable pressure control valve •Right and left hand use Part No. 61900. PROSERIES BACKPACK SPRAYER •4 gallon backpack sprayer with deluxe features for the landscape & turf professional •Piston pump •4” wide opening with strainer/filter basket •Cushion grip spray handle •Adjustable padded shoulder with waist straps •3 pc nozzle pack (brass, poly fan, poly cone) •Right and left hand use Part No. 61800. POLY BACKPACK SPRAYER •4 gallon backpack Diaphragm sprayer with standard features for the landscape & turf professional •Diaphragm pump for wettable powders •4” wide opening with strainer/filter basket •Cushion grip spray handle •Adjustable padded shoulder with waist straps •3 pc nozzle pack (brass, poly fan, poly cone) •Right and left hand use Part No. 64800. Hand Sprayers WET or DRY HOSE END SPRAYER Hose end sprayer can accept liquid or dry materials. Has 3 spray positions. Up to 21 gallon of mixing liquid. Can hold up to 2 lb. of dry material. Insulated comfort grip with easy On/ Off thumb switch. Translucent body for easy measuring. Part No. 6005. MULTI-PURPOSE SPRAYER •Multi-purpose hand sprayer for herbicides, pesticides, fertilizers and general cleaning •Nitrile seals for handling most cleaning solutions, herbicides, and pesticides •Adjustable cone nozzle •48 oz. bottle •Surespray™ anti-clog filter Part No. 1002. SP04-10 GREGG DISTRIBUTORS LTD. INDUSTRAIL HEAVY DUTY CLEANER/ DEGREASER SPRAYER •Multi-Purpose Sprayer for cleaningdegreasing •Viton™ seals •Brass adjustable cone nozzle •48 oz bottle •SureSpray™ Anti-clog Filter Part No. 1046. POLY FOAMER SPRAYER •Multi-Purpose Hand Sprayer for applying foaming solutions •Designed to spray foam •Nitrile Seals •Adjustable Cone Nozzle •48 oz bottle •SureSpray™ Anti-clog Filter Part No. 1054. ACETONE SPRAYER •Acetone Hand Sprayer for Concrete Staining •EPDM seals and gaskets to handle high concentrations of Acetone •Adjustable cone nozzle •48 oz bottle •SureSpray™ Anti-clog Filter Part No. 10027. CHAPIN® CHP/1635/1636 Hand Sprayers POWER MISTER •32 oz. Multi-purpose trigger sprayer •Multi-use power mister •Great for watering house plants and flowers. Part No. 1055. UPSIDE DOWN SPRAYER •32 oz. Multi-purpose trigger sprayer •Sprays upside down Part No. 1105. Sprayer Replacement Parts and Accessories Part No. 6-1866 6-1898 6-1925 6-1928 6-1945 6-2000 6-2001 6-2003 6-3337 6-4570 6-4601 6-4602 6-4603 6-4604 6-4626 6-4627 6-4629 6-4631 6-4638 6-4645 6-4646 6-4824 6-5351 6-5353 6-5354 6-5355 6-5358 6-5364 6-5368 6-5369 6-5370 6-5371 6-5372 6-5373 6-5374 6-5378 6-5380 6-5382 6-5383 6-5384 6-5387 6-5797 6-5943 Description Premier Epoxy Coated Zinc Shut-off Industrial Brass Shut-off Repair Kit Acetone Nozzle Kit Poly Openhead Repair Kit with Viton RB/Home & Garden Shut-off - Clean & Seal RB/Home & Garden Hose Seal Kit Carrying Strap 8 Position Nozzle XP Repair Kit-Viton XP Repair Kit-Acid XP Repair Kit-Xtreme XP Repair Kit-EPDM Poly Shut-off Industrial Repair Kit Kit OH/PL/FT Viton w/Blister Noz PL 1-4567 w/Blister Poly Shut-off, Cleaner/Degreaser Pressure Relief Valve Xtreme Repair Kit Fan Nozzle Kit Seal Kit for SNG/SNG+ Shield for SNG 34” Clear Reinforced Hose 10’ Coil Hose Spray Handle for SNG/SNG+ Measuring Cup Pro Series Seal Kit Repair Kit, Acid Staining 12” Curved Poly Wand, Acid Staining Poly Shut-off, Acid Staining Poly Adjust Cone Nozzle, Acid Staining Industrial Holster Pressure Relief Valve, Acid Staining Xtreme Conversation Kit - Hose/Seals Extreme Shut-Off Ergo Spray Handle Kit Relief Valve Kit - Premier Pro Pro + Acid Staining Kit O-ring kit Industrial Brass Fan Tip Nozzle Noz BR 1-5943 (female) - 1.0 gpm Part No. 6-6000 6-6002 6-6003 6-6062 6-6091 6-6092 6-6136 6-6141 6-7701 6-7703 6-7704 6-7711 6-7734 6-7742 6-7745 6-7748 6-7749 6-7755 6-7756 6-7770 6-8093 6-8094 6-8095 6-8096 6-8097 6-8098 6-8099 6-8100 6-8102 6-8104 6-8105 6-8106 6-8107 6-8108 6-8109 6-8110 6-8111 6-8112B 6-8114 6-8115 6-8116 6-8117 6-8118 Description Brass Adjustable Cone Nozzle w/Viton Noz BR 3-6002 w/Blister Poly Adjustable Cone Nozzle Industrial Brass Shut-off w/Fitting 48” Industrial Hose w/Fittings 48” Heavy Duty Industrial Hose 42” Nylon Reinforced Hose 48” Nylon Reinforced Hose Ext Tube 3-7701 w/blister 24” Industrial Brass Male Extension 24” Industrial Brass Female Extension 18” Premier Brass Extension Ext Tube 3-7734 w/blister Curved O-Ring 18” Industrial Brass Female Extension Industrial Filtered Outlet Tube 12” Poly Extension with Viton 18” Poly Extension with Viton 12” Poly Brass Extension with Viton 16” Poly Brass Extension with Viton 32” Extendable Wand with Viton Plastic Adj. Nozzle Retaining Nut Jet Filter Flat Spray Jet Swirl Plate Jet Cap Elbow O-Ring O-Ring Pin Hose 48” Hose Clamp Carrying Strap O-Ring Clamp Washer Retaining Nut Retaining Nut O-Ring O-Ring O-Ring Valve Plate Spring Part No. 6-8119 6-8120B 6-8122 6-8123 6-8134 6-8137 6-8138 6-8139 6-8140 6-8141 6-8142 6-8143 6-8146 6-8147 6-8148 6-8151 6-8152 6-8153 6-8154 6-8169 6-8178 6-8179 6-8180 6-8181 6-8184 6-8219 Description Sealing Plug Shut-Off Repair Kit Brass Adjustable Nozzle Strap - 61400 Series Piston Collar Straps - 61800 Series Shut-Off Assembly Poly Cone Nozzle Assembly Poly Fan Nozzle Assembly Wand Assembly Hose Assembly Straps - 61700 Series Filter Basket w/ Cap Shut-Off Assembly Replacement Elbow Kit Pressure Regulator Wand Clips O-Ring Kit O-Ring Kit 4th Stage Replacement Filter Piston Cylinder Assembly Pump Piston Assembly Piston Pump Repair Kit Replacement Shoulder Straps Diaphragm Pump Spray Tube 20” DRIPLESS SHUT-OFF WAND Chapin Dripless Shut-offs seal at the nozzle tip eliminating excess buildup in the extension wand that can cause unwanted drips when the shut-off is disengaged. When the trigger grip is released from spraying, the shut-off seals at the nozzle tip keeping the excess left in the wand from dripping. Excellent for applying sealers where precise control is needed. Equipped with Xtreme® Seals to handle most extreme chemicals and high concentrations of Acetone®, Naphtha®, Xylene® and Toluene®. Part No. 6-8135. www.greggdistributors.ca SP04-11 CHAPIN® CHP/1636/1637 EZ Mount & Tow Sprayerss EZ MOUNT ATV DELUXE SPOT SPRAYERS •2.2 GPM, 12-volt diaphragm pump w/quick connect alligator clips •Max pressure of 70 PSI with 30’ max vertical sprayer & 26’ max horizontal spray •Double filtration system extends life of the sprayer •Manifold w/pressure gauge for easy attachment of accessories •19” professional dripless shut off w/brass wand and nozzle (Viton® equipped) •15’ reinforced hose for hard to reach areas •Wide opening, chemical resistant tank for mess free mixing and drain plug to empty tank •15’ ratchet straps included Part No. 97300, 15 gallon. Part No. 97500, 25 gallon. EZ SPRAYER TWIN EZ SPRAYER BOOMLESS NOZZLE BOOM KIT, 7-FEET, ONE NOZZLE KIT, 16-FEET •16-Feet coverage one nozzle boomless acFITS ATV/UTV •7-feet coverage twin nozzle boom accessory sprayer kit •Fits most atv/utility/lawn trailers-use minimum 1.8 GPM pump •Adjustable boom mounting brackets •For Chapin EZ mount and EZ tow sprayers Part No. 6328. cessory sprayer kit •Fits most atv/utility/lawn trailers-use minimum 1.8 GPM pump •Great for taller grass and eliminates risk of boom or nozzle damage •For Chapin EZ mount and EZ tow sprayers Part No. 6329. Handseeders HAND CRANK SPREADER •Poly, scoop design with 92 cubic inch/1.5L capacity •Easy crank design •Adjustable for seed, fertilizer, and salt/ice melt Part No. 84150. RESIDENTIAL BAG SPREADER/SEEDER •25 lb. Capacity •Heavy duty, water resistant zipper top bag •Enclosed gear box •Adjustable shoulder strap Part No. 84500. SP04-12 GREGG DISTRIBUTORS LTD. EZ TOW ATV TOW BEHIND SPRAYERS •2.2 GPM, 12-volt diaphragm pump w/quick connect alligator clips •Max pressure of 70 PSI with 30’ max vertical sprayer and 26’ max horizontal spray •Double filtration system extends life of the sprayer •Manifold w/pressure gauge for easy attachment of accessories •19” professional dripless shut off w/brass wand and nozzle (Viton® equipped) •15’ reinforced hose for hard to reach areas •Wide opening, chemical resistant tank for mess free mixing and drain plug to empty tank •Steel frame trailer w/pneumatic tires and adjustable hitch •7’ spray boom included Part No. 97600, 15 gallon. Part No. 97700, 25 gallon. EZ SPRAYER LAWN TRAILER MOUNTING BRACKET KIT •ATV/utility vehicle accessory mounting kit •Brackets fit most ATV’s and many utility vehicles and lawn trailers •Adjustable boom mounting brackets for optimum boom height •For Chapin EZ mount and EZ tow sprayers Part No. 6330. EZ MOUNT REPLACEMENT PARTS Part No. RP00004 RP00002 RP00006 RP00005 RP00017 RP00007 RP00019 RP00014 RP00013 RP00039 RP00123 Description Pressure gauge 2.2 GPM replacement pump Wire harness Filler tank cap Drain plug 3/8” in tank filter Manifold Wand clips 3 GPM spray nozzle Filter basket 2.0 GPM pump CHAPIN® C CHP/1637 Spreaders SURESPREAD ALL SEASON PROFESSIONAL STAINLESS SURESPREAD SALT SPREADER PROFESSIONAL STAINLESS STEEL PUSH SPREADER STEEL PUSH SPREADERS •Surespread™ technology ensures an even pattern & distribution of product by combining our: •Unique edge control to easily direct product distribution – keep unwanted product out of your flowerbeds and off of driveways/other bordering areas •Innovative gate design and placement allows for a wide spread pattern and increased coverage – get the job done quickly! •Positive stop dial for precise gate adjustment •Stainless steel, heavy duty frames provide full support of hopper at its base •T-handle with comfort grips features gate control at your fingertips •Diamond shaped tubing ensures handle won’t twist when pushing heavy loads •14” Fully pneumatic tires provide stability over uneven terrain •Enclosed gear box •Grate and rain cover included •Easy to assemble Part No. 82125, 125 lb. Spreader. Part No. 82100, 100 lb. Spreader. •Surespread™ technology ensures an even pattern of distribution of product by combining our: •Innovative gate design and placement •Unique edge control •Enclosed metal gears to withstand the elements •Solid steel linkage opens and closes the gate in incremental steps •Patent pending poly conical auger helps agitate product and minimize clumping •43% Larger gate opening to allow product to flow smoothly •Adjustable 360˚ salt baffle system helps spread salt only where you want it •Stainless steel t-handle with comfort grips feature gate control at fingertips •14” Fully pneumatic tires easily handle rough terrain •Heavy duty stainless steel frame fully supports hopper at its base •Unique two-piece hopper design allows for easy replacement of hopper •Grate and rain cover included •All season spreader spreads salt/halite/icemelt, fertilizer, seed and more with a simple gate adjustment Part No. 82108, 100 lb. Spreader. ACCESSORIES Part No. 6-9000, Rain cover. Part No. 6-9001, Optional grate SURESPREAD ALL SEASON RESIDENTIAL PUSH SPREADERS •Surespread™ technology ensures an even pattern & distribution of product by combining our: •Unique edge control to easily direct product distribution – keep unwanted product out of your flowerbeds and off of driveways/ other bordering areas •Innovative gate design & placement allows for a wide spread pattern and increased coverage – get the job done quickly! •Positive stop dial for precise gate adjustment •12” Fully pneumatic tires easily handle rough terrain •Heavy duty steel frame fully supports hopper at its base •Enclosed acetal gears are protected from debris and the elements •Application chart to dial in the correct application setting Part No. 80100,100 lb. Spreader. Part No. 80080, 80 lb. Spreader. SURESPREAD RESIDENTIAL PUSH SPREADER •Fully assembled with easy flip up handle •10” Solid tires w/rubber tread are virtually maintenance free – never go flat! •Adjustable gate control conveniently located on handle •Durable hopper w/3 hole gate opening for even distribution of materials •Enclosed acetal gears are protected from debris & the elements Part No. 80025, 70 lb. Spreader. ALL SEASON EZ TOW SPREADER •Enclosed metal gears to withstand the elements •Solid steel linkage opens and closes the gate in incremental steps •Patent pending poly conical auger helps agitate product and minimize clumping •43% Larger gate opening to allow product to flow smoothly •Adjustable 360˚ salt baffle system helps spread salt only where you want it •Powdercoated steel t-handle with comfort grips feature gate control at fingertips •Easy to assemble •14” Fully pneumatic tires provide stability over uneven terrain •Powdercoated steel frame directly supports hopper base and hopper •Unique two-piece hopper design allows for easy replacement of hopper Part No. 82175, 125 lb. Spreader. www.greggdistributors.ca SP04-13 RIDGID® RID/3321 Submersible Sump Pumpss RBSU25 BATTERY BACKUP SYSTEM Features: •40 GPM at 5 ft. •Reinforced, corrosion-resistant, thermoplastic battery backup sump pump system •Reliable reed float switch for automatic operation •Professional grade backup system keeps battery properly charged - requires one 40 Amp Hr or 75 Amp Hr deep cycle battery •Alarm system, with status indicator lights, lets homeowner know when backup system is active •Designed for easy installation without any major plumbing changes Part No. 47328, 12-Volt Battery Backup System 500RSS SYSTEM Preassembled primary and backup sump pump system with Advance Notification Battery Backup. •Preassembled simple pump system. Job ready - installs in 20 minutes or less •Includes check valves, primary pump and backup pump all ready for operation •Microprocessor controller checks for AC power and battery status •Automatically checks status of backup pump every seven days •Auto dialer calls any number you choose with a voice alert program up to five phone numbers •Smart charging technology eliminates surface charge and brings battery back to optimal levels •Easily connects to any standard phone line. Telephone service required for auto dialer function Part No. 47318, Includes 1/2 HP Sump Pump System and Battery backup with Advance Notification & 12-Volt Backup Pump. RSM33 BATTERY BACKUP SYSTEM WITH ADVANCE NOTIFICATION XD PRO SUBMERSIBLE SUMP PUMPS XD PRO SEWAGE PUMPS XD PRO EFFLUENT PUMPS Features: •40 GPM at 5 ft. •Microprocessor controller checks for AC power and battery status •Automatically checks status of backup pump every seven days •Auto dialer calls any number you choose with a voice alert program up to five phone numbers •Smart charging technology eliminates surface charge and brings battery back to optimal levels •Easily connects to any standard phone line. Telephone service required for auto dialer function •Use any deep cycle 12V battery, maintenance free recommended •Preassembled for quick installation Part No. 47323, 12-Volt Battery Backup System with Advanced Notification Rugged cast-iron construction features a 2” solids-handling capacity and a high performance permanent split capacitor (PSC) motor designed to accommodate single-family homes, multiple-family homes and small commercial applications. RW50T Sewage Pump •Piggy-back tether float switch for automatic or manual operation •Vortex impeller generates high flow rates while handling up to 2” diameter solids •Cast-iron motor and pump housing •Ceramic/carbon seal for maximum life •Upper bronze bearing and lower ball bearing for quiet performance and long life •Designed for residential and light commercial sewage applications •Ideal for basement or below grade installations •Designed for 18” diameter or larger sewage basins Part No. 47293, 1/2 HP - 120 Volt Sump Pump 130 GPM @ 5 ft. RW50V Sewage Pump •Snap action vertical float switch for automatic operation •Vortex impeller generates high flow rates while handling up to 2” diameter solids •Cast-iron motor and pump housing •Ceramic/carbon seal for maximum life •Upper bronze bearing and lower ball bearing for quiet performance and long life •Designed for residential and light commercial sewage applications •Ideal for basement or below grade installations •Designed for 18” diameter or larger sewage basins •Engineered flow director, shaped to reduce the likelihood of debris from interfering with switch operation Part No. 47298, 1/2 HP - 120 Volt Sump Pump 130 GPM @ 5 ft. SP04-14 GREGG DISTRIBUTORS LTD. Rugged cast iron construction features a 1/2” solid-handling capacity and an 8 ft. power cord that operates an automatic vertical switch to prevent perimeter drainage system overflow. Features: •Energy efficient, oil-filled 1/3, 1/2, and 3/4 HP motors •Top suction intake filters debris, minimizes airlocks and clogging for increased reliability •1/2” solid-handling capacity, thermally protected sump pump •360° stainless steel float guard, for superior switch protection from debris •1-1/2” discharge for easy installation and compliance to building codes •11” footprint allows installations into tight sump pits •Stainless steel fittings and impeller plates for corrosion resistance •Two-pole snap-action mechanical float switch •Carbon/ceramic shaft seal for maximum life •Upper and lower ball bearings for quiet performance and long life Part No. 47348, 1/3 HP Sump Pump 60 GPM @ 5 ft. Part No. 47343, 1/2 HP Sump Pump 70 GPM @ 5 ft. Part No. 47338, 3/4 HP Sump Pump 80 GPM @ 5 ft. Rugged cast-iron construction features a 1/2” solids-handling capacity and 20’ piggyback power cord to easily remove grey water (soiled) from septic tanks, sump pits or laundry tray systems. Features: •1/2” solids-handling capacity, thermally protected pump •Energy efficient, oil-filled motor •20’ piggyback power cord for automatic or manual operation •Top suction intake filters debris for increased reliability •1-1/2” discharge for easy installation and compliance to building codes •11” footprint allows installations into tight sump pits •Stainless steel fittings and impeller plates for corrosion resistance •Carbon/ceramic shaft seal for longer life •Upper and lower sealed ball bearings for quiet performance and long life Part No. 47308, 1/3 HP Effluent Pump 60 GPM @ 5 ft. Part No. 47303, 1/2 HP Effluent Pump 70 GPM @ 5 ft. RIDGID® RID/3321 Submersible Sump Pumps 1/6 HP DEWATERING PUMP Features: •Corrosion-resistant reinforced thermoplastic housing, volute, and impeller •Bottom suction design filters and removes water down to 3/8” of surface •1-1/4” NPS discharge with 3/4” garden hose adapter included •Easy carry handle for portability Part No. 47283, 1/6 HP Dewatering Pump 1¼” X 16 ft. Collapsible Hose 44 GPM @ 5 ft. 1/4 HP AUTO ON/OFF DEWATERING PUMP Features: •Water detection technology, turns the pump on and off automatically with the presence of water •Energy efficient, high flow 1⁄4 HP oil-free motor •Corrosion-resistant, sealed thermoplastic construction for submersible use •1-1/4” discharge with garden hose adapter included •Bottom suction design filters debris and removes water down to 3⁄8” of surface •Motor rated 2.5 Amps Part No. 47278, 1/4 HP Auto ON/OFF Dewatering Pump 44 GPM @ 5 ft. CHECK VALVES Part No. 47678, Kit Includes: - 1½” Check Valve, (2) rubber boots, (4) hose clamps Part No. 47668, Kit Includes: - 1½” threaded check valve, (1) rubber boot, (2) hose clamps Part No. 47673, Kit Includes: - 2” check valve, (2) rubber boots, (4) hose clamps 47678 47668 1/4 HP AUTO ON/OFF DEWATERING PUMP W/FREEZE PROTECTION Features: •Water detection technology, turns the pump on and off automatically with the presence of water •Applications include dewatering pool covers and other situations requiring water removal •Built-in debris and freeze protection •Check valve reducer included to reduce short-cycling •25 ft. power cord •Energy efficient, high flow oil-free motor •Sealed thermoplastic construction for submersible use •Strainer filters debris to minimize clogging •ON level - 2 1/8”, OFF level - 3⁄4” Part No. 47273, 1/4 HP Auto ON/OFF Dewatering Pump w/ Freeze Protection 43 GPM @ 5 ft. UTILITY TRANSFER PUMP Features: •Rugged, cast-iron pump housing and motor for durability with easy-priming outlet •Cast-iron transfer pump is designed for tough pump applications •Easy-carry cast-iron handle for portability •Portable transfer pump you can take anywhere •High performance 1⁄2 HP motor •3⁄4” brass hose adapters connect to standard garden hose •Applications include drainage, dewatering flooded basements, emptying stock tanks, draining water heaters, and charging poly glycol radiant heating lines •Boosts pressure up to 50 PSI Part No. 47268, 1⁄2 HP cast-iron transfer pump Reinforced thermoplastic storage case Suction strainer 3⁄4” brass hose adapters 950 GPH @ 25 ft. 47673 WIRE CFT/3930 Part No. Size 1010015 1010033 1010051 1010079 1010097 1010113 1010131 1010177 1010195 1010211 1010239 1010257 1010275 1010319 1010355 1010373 1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 7/8” 1” 1-1/8” 1¼” 1½” 1¾” 2” Rope Clips GENINUE RED U-BOLT FORGED STEEL, HOT DIP GALVANIZED CLIPS www.greggdistributors.ca SP04-15 TRIMACO TMC/3839 Masking Products CLINGCOVER® PLASTIC SHEETING The perfect self-adhering masking film for all your construction and remodeling jobs. ClingCover clings to almost any surface. Part No. 79400, 9 ft. x 400 ft. EASYMASK® MASKING PAPER Use paper to mask off window and door trim to prep for painting. Brown general purpose paper formulated for water-based materials: plaster, drywall texture, latex. Part No. 12912, 12” x 180 ft. (180 sq. ft.) Part No. 12918, 18” x 180 ft. (270 sq. ft.) Part No. 12107, 12” x 1,000 ft. (1000 sq. ft.) Part No. 12102, 18” x 1,000 ft. (1500 sq. ft.) Part No. 12104, 24” x 1,000 ft. (2000 sq. ft.) Part No. 12108, 36” x 1,000 ft. (3000 sq. ft.) ONE TUFF™ FLOOR PROTECTOR Durable DuPont™ Sontara® is great for protecting floors and delicate surfaces and is packaged in rolls for quick and easy use. The cloth side absorbs while the coated side provides maximum protection against leakage. Part No. 90100, 24” x 100 ft., 200 sq. ft. shelf display Part No. 90200, 24” x 200 ft., 400 sq. ft. shelf display Part No. 94820, 48” x 200 ft., 800 sq. ft. REVERSE WOUND PROTECTIVE FILM FOR CARPETS Easy-to-use adhesive film provides a tight bond with soft surfaces, such as carpet, yet is easy to remove. Part No. 62450/6, 24” x 50 ft., 100 sq. ft. shelf display Part No. 62410, 24” x 100 ft., 200 sq. ft. shelf display Part No. 62420, 24” x 200 ft., 400 sq. ft. Part No. 63020, 30” x 200 ft., 500 sq. ft. Part No. 63620, 36” x 200 ft., 600 sq. ft. Part No. 63650, 36” x 500 ft., 1,500 sq. ft. Part No. 63610, 36” x 1,000 ft., 3,000 sq. ft. Part No. 64850, 48” x 500 ft., 2,000 sq. ft. REVERSE WOUND PROTECTIVE FILM FOR HARD SURFACES Use on hard surfaces for painting, moving and construction projects. Part No. 72420, 24” x 200 ft., 400 sq. ft. Part No. 72436, 36” x 500 ft., 1,500 sq. ft. ADJUSTABLE FILM APPLICATOR Adjustable applicator for 24”, 30” and 36” carpet and hard surface films. Unrolls reverse wound film quickly and easily Part No. 62300. PREMIUM CANVAS DROPCLOTHS Full panel drops are made from high quality canvas. Each drop is shrink wrapped and boxed for easy handling. Canvas dropcloths are washable and reusable. All dropcloths are full piece, no remnants. 6 OZ. PREMIUM UTILITY WEIGHT CANVAS DROPCLOTH Part No. 56707, 4 ft. x 12 ft., runner Part No. 56708, 4 ft. x 15 ft., runner Part No. 56701, 9 ft. x 12 ft. Part No. 56703, 12 ft. x 15 ft. RUBBER-DUCKIE™ HEAVYWEIGHT BUTYL DROPCLOTH Heavyweight coated dropcloth is leak resistant. Part No. 80207, 4 ft. x 12 ft., runner Part No. 80208, 4 ft. x 15 ft., runner Part No. 80201, 9 ft. x 12 ft. Part No. 80203, 12 ft. x 15 ft. 8 OZ. PREMIUM CONTRACTOR GRADE HEAVYWEIGHT CANVAS Part No. 58905, 4 ft. x 5 ft., quick drop Part No. 58907, 4 ft. x 12 ft., runner Part No. 58908, 4 ft. x 15 ft., runner Part No. 58909, 6 ft. x 9 ft. Part No. 58901, 9 ft. x 12 ft. Part No. 58903, 12 ft. x 15 ft. OLD SCHOOL HEAVYWEIGHT BUTYL DROPCLOTH Triple-coated butyl dropcloth is heavy weight, leak resistant and durable. Part No. 80427, 4 ft. x 12 ft., runner Part No. 80428, 4 ft. x 15 ft., runner Part No. 80421, 9 ft. x 12 ft. Part No. 80422, 12 ft. x 15 ft. SP04-16 GREGG DISTRIBUTORS LTD. 10 OZ. PREMIUM CONTRACTOR GRADE EXTRA HEAVYWEIGHT CANVAS Part No. 51125, 4 ft. x 5 ft., quick drop Part No. 51127, 4 ft. x 12 ft., runner Part No. 51128, 4 ft. x 15 ft., runner Part No. 51129, 6 ft. x 9 ft. Part No. 51121, 9 ft. x 12 ft. Part No. 51123, 12 ft. x 15 ft. ONE TUFF™ PROFESSIONAL GRADE DROPCLOTHS Durable DuPont™ Sontara® is great for painting, staining and plastering. The cloth side absorbs while the coated side is leak-resistant. Part No. 90099, 4 ft. x 15 ft. Part No. 90088, 6 ft. x 8 ft. Part No. 90019, 9 ft. x 12 ft. Part No. 90039, 12 ft. x 15 ft. 12 OZ. PREMIUM CONTRACTOR GRADE SUPER HEAVYWEIGHT CANVAS Part No. 51207, 4 ft. x 12 ft., runner Part No. 51208, 4 ft. x 15 ft., runner Part No. 51201, 9 ft. x 12 ft. Part No. 51203, 12 ft. x 15 ft. TRIMACO TMC/3839 Masking Products CAR COVER Lightweight, full panel cover protects car from overspray. Made of non-woven material, the cover has double stitched seams and an elastic border which conforms to car size. One Size Fits All Car Cover – compressed Part No. 36002/4. LIG/3190/3207 PEEL & STICK ZIPPER Creates an instant door on tarps, plastic coverings and shrink wraps. For hazardous material abatement stations. Part No. 06184, 2¾” x 7 ft. heavy duty fabric adhesive zipper – 2pk. Part No. 06182, 3” x 7 ft. woven poly adhesive zipper – 2pk. DIRT TRAPPER™ ULTRA STICKY MAT When placed inside jobsite or work area entrances, the sticky mat traps contaminants from shoes and carts. Part No. 01267, 24”x 36”, 30 Layer Blue Mat – 4pk Part No. 01274, 24”x 36”, 30 Layer Clear Mat – 4pk Part No. 01277, 36”x 36”, 30 Layer Blue Mat – 4pk Part No. 01276, 36”x 36”, 30 Layer Clear Mat – 4pk Part No. 01260, 26”x 32” Non-skid Frame, 15 Layer Mat Part No. 01263, 24”x 30”, 15 Layer Refill Part No. 01265, 24”x 30” , 30 Layer Refill PHILIPS / SYLVANIA / GE / WAGNER P HID Bulbs HID BULBS D3R Type T-2¾ T-2¾ T-2¾ T-2¾ Part No. D3R D3S D4R D4S Volts 12 12 12 12 Wattage 35 35 35 35 Halogen Bulbs - Carded D4S Type T-5 T-4⅝ T-4 T-4 T-4⅝ T-2¾ T-3¼ T-5 T-4 T-4 T-4 T-5 Part No. BP9003SU BP9004SU BP9005SU BP9006SU BP9007SU BPH1ST BPH3ST BPH4ST BPH7SU BPH11ST BPH11SU BPH13SU Volts 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 13.2 13.2 13.2 12.8 Wattage 65/55 64/45 65 55 65/55 55 55 60/55 55 55 65/55 65/55 All bulbs are blister packaged 1 bulb per card. Suffixes: ST = SilverStar - Whitest, Brightest, Sharpest - SilverStar’s colour temperature is a white hot 4000°K, far higher than other halogens. Shines with a luminance up to 20% greater than other halogens. SU = SilverStar Ultra - By providing up to 50% greater brightness, they can increase visibility down the road by up to 40%, and peripheral visibility by up to 50%. This can equate to as much as 50 to 100 feet more visibility at night—so you can see farther, wider and better. QQQ/2942 NORSEMAN™ Canvas Belly Tarps CANVAS BELLY TARPS Used as a barrier to keep the underside of heavy haulers free of debris and contaminates as well as helping to retain engine heat preventing oil freeze ups in cold weather. 4 ft. x 9 ft. cut size canvas belly tarp. 20 oz. per sq. yard, 2½” hem. Brass grommets every 24”. Waterproof and rot resistant. Part No. 386872. Smaller size canvas belly tarp — 4 ft. x 6 ft. cut size. Accommodates newer bumper styles. 17.6 oz. per sq. yard. Waterproof and rot resistant. Part No. 411815. www.greggdistributors.ca SP04-17 PIUSI PIU/3228 DEF Dispensing Products PIUSI THREE25 TOTE DISPENSERS Created to ensure optimum durability and efficiency, the Piusi Three25 administers a 32.5% urea solution that is protected by our 3D DEF filter which prevents the contamination of your DEF and in turn allows for an increased life of the catalyst. This kit features our latest SB325 nozzle with break-away stainless steel spout, revolutionary AdBlue® 3D DEF filter, original Piusi Dispense Coupler (PDC) and more! With a fortified new mounting bracket and updates such as crimped DEF hose, this kit brings a whole new way to dispense DEF. The Piusi Three25 is equipped with the SB325 automatic nozzle, featuring a sleek, innovative tecnhopolymer design that is reliable, ergonomic, and has a flexible shell that protects it from weathering and UV radiation. The spout is used in conjunction with our Piusi Magnetic adaptor to prevent a potential miss-fill. If the magnetic adapter is not in that allocated tank then the nozzle will not engage. Safety is also guaranteed by the break-away system. In the event that a vehicle accidentally drives away with the nozzle still in the tank, the spout is designed to detach from the nozzle. This system allows for a quick repair by merely fitting a new spout on the nozzle. Part No. Description F00101A10 F00101A00 Three25 12V Three25 120V Flow Rate volt/Hz gpm 7-9 12 7-9 120/60 UL watt Nozzle Delivery Hose Approval 370 Auto 20 ft. No 370 Auto 20 ft. Yes rpm 1700 1700 SUZZARABLUE TOTE DISPENSERS The dispensing equipment is designed for easy management and dispensing. It includes a self-priming membrane pump that has no need for a dynamic seal, which reduces the need for maintenance. SUZZARABLUE PRO •Stainless steel base with nozzle holder •Heavy duty pump •Meter K24 •Automatic stainless steel nozzle •Delivery hose 20 ft. •Suction hose 4 ft. •Hose tail and clamps. SUZZARABLUE BASIC •Stainless steel base •Pump •Manual nozzle •Delivery hose 20 ft. •Suction hose 4 ft. •Hose tail and clamps. Part No. F00201A1 F00201A2 F00201A8 F00201A9 Description 120V PRO 120V BASIC 12V PRO 12V BASIC Flow Rate volt/Hz gpm 7-9 120/60 7-9 120/60 7-9 12 7-9 12 SUZZARABLUE PRO SUZZARABLUE DRUM DISPENSERS This dispensing equipment offers a base that can be easily transferred. The kit contains: Stainless steel base for drum •Pump •Nozzle •Delivery hose (20 ft) •Suction hose (1.5 ft) Flow Rate volt/Hz gpm F00201A3 DRUM manual 7-9 120/60 F00201A4 DRUM automatic 7-9 120/60 Part No. Description rpm 1700 1700 UL Approval 370 Manual Yes 370 Automatic Yes watt Nozzle HAND PUMP DISPENSER The delivery system includes a hand pump, dispensing tube, down tube and adapter that is easy to install and remove from the drum. Flow rate: 4 gpm, Spout: 3/4” BSP, Inlet pump: 1” NPS, 9.8 ft. delivery hose. Part No. F0033213. rpm watt Meter Nozzle 1700 1700 2800 2800 400 400 260 260 Automatic Manual Automatic Manual Yes No Yes No UL Approval Yes Yes No No SUZZARABLUE BASIC DRUM TROLLEY Designed for easy mobility of your DEF drum. Its robust build and four wheel design allows for maximum stability and longevity while being used in a shop or semi-flat surface. Any of the five tote pump kits can be installed on the back of the trolley. Part No. R1206801. drum and pump sold separately SUZZARABLUE MANUAL SUZZARABLUE AUTOMATIC SUZZARABLUE HEAVY DUTY PUMPS Membrane pump equipped with an electric motor, auto shutoff timer and no need for a dynamic seal, creating a reliable industrial pump with self priming capabilities. AC PUMP Technical features: •Voltage: 120V/60 Hz •Hose tail connection: 3/4” •ON/OFF switch •6 ft cable with socket •30 psi Max pressure •30 min. cycle Part No. F0020300 F0020400 F0020401 DC PUMP Technical features: •Voltage 12 / 24 V •Hose tail connection: 3/4” •ON/OFF switch •6 ft cable with socket •20 psi Max pressure •20 min. cycle Flow Rate volt/Hz gpm AC pump 120V 7-9 120/60 DC pump 12V 7-9 12 DC pump 24V 7-9 24 Description rpm watt amp 1400 2800 2800 400 260 310 SP04-18 GREGG DISTRIBUTORS LTD. 2 22 13 AUTOMATIC NOZZLES Features a innovative technopolymer casing, break-away system, and a stainless steel spout. Safety is guaranteed by the break-away system. In the event that a vehicle accidentally drives away with the nozzle still in the tank, the spout is designed to detach from the nozzle. This system also allows for a quick repair by merely fitting a new spout onto the nozzle. Automatic nozzle design features a reliable, ergonomic, and flexible shell that protects against weathering and UV radiation. Part No. F0061700. Part No. F0061701, With meter. Part No. R1917300, Replacement spout kit. •9 gpm flowrate •3/4” inlet, no swivel •19 mm spout F0061701 PIUSI PIU/3228 DEF Dispensing Products HOSE REEL K24 ADBLUE® FLOW METER Hose reel made specifically for DEF with 48 ft. EPDM supply hose. Features: •Reduced pressure loss through the proper sizing of the hydraulic system •Includes a protective latch mechanism that prevents accidental contact with the hands •Adjustable arms for easy positioning as required Part No. F0075011. Part No. F1627900, Rotating hose reel bracket. The K24 is easy to install, in line or at the end of the delivery hose, and it features a compact easy readable display that can be applied directly on the nozzle. User can quickly substitute the 2 batteries. Impulse type signals: single channel, reed switch. Electronic card with LCD display: 5 digit partial total from 0.1 to 99999, 6 digit total from 1 to 999999. K24 PULSE-METER Type of output signal: raw signal (reed switch), single channel. Max 28 V Ac/dc 100 mAmp. TURBINOX INLINE PULSE METER This meter is easy to install. A tight stainless steel body provides endurance for use in all conditions. Also available a pulser display to connect an external receiver. User can quickly substitute the 2 display batteries. Part No. F0040734 F0040721 F0049503 Pulse Out (p/g) Max Flow Rate Pressure Display Pulser Display gpm psi Version Version K24 Meter (1 socket) GAL 1.6 - 26.4 14.5 Yes 333 K24 Pulser-meter (1 socket) 1.6 - 26.4 14.5 No 333 Remote display with Pulse OUT Yes 1-100 Description •145 psi Max pressure •3/4” inlet with swivel •3/4” outlet hosetail •8.7 @ 9 gpm pressure loss Display can be rotated in 4 different positions SUZZARABLUE NOZZLES BLUE BOX Piusi nozzles are all made from materials compatible with Urea. Complete with 3/4” hose-tail fitting and 3/4” spout extension. Manual Nozzle - distinguished by high efficiency, due to the low flow resistance, and inexpensive operation. Automatic Nozzle - featuring a device that stops the flow when the tank is full. Nozzle & Electronic Flow Meter - providing immediate reading of dispensed quantity. F0087002 F0061903 F0061902 F1476100 Flow Rate Display gpm Description Part No. Manual nozzle/K24 meter - with swivel Automatic nozzle with swivel Automatic nozzle Manual nozzle Part No. F1647500, K24 adapter for automatic nozzle. 3/4” MBSP - 1” FBSP. BOTTOM CONNECTION KIT 2” NPT. Part No. F1551502. 19 11 11 20 Yes No No No Part No. F1577600, Plastic adapter for K24 manual nozzle. 1” MBSP - 1” FBSP. EPV STAINLESS STEEL DISPENSE COUPLER by Micro Matic Part No. F1647700. GRAVITY KIT As an alternative to the electric pump and hand pump options, the Gravity Kit offers another method of dispensing DEF. Equipped with manual nozzle, 9 ft of hose with 2” NPT IBC bottom adapter, this is an economic means of utilizing your IBC tote to dispense from an elevated position. Part No. F1551701. ADAPTERS - Metal box with lock. Box key included Dimensions: 23” x 12” x 24 Part No. R1611800. Stainless Steel EPV CONTAINER VALVE 2.5” X 5 buttress. 3A orange key. Part No. F1698900. EPV DOWN TUBES HDPE 3/4” diameter. Part No. F1699200, for 55 gal drum. Part No. F1699100, for 275 gal IBC. Part No. F1699000, for 330 gal IBC. PLASTIC FITTINGS RSV STAINLESS STEEL DISPENSE COUPLER by Micro Matic Part No. F1536000. 3D FILTER / CARTRIDGE (1) Part No. F1552200, 3/4″ hose x 1” MBSP hose tail fitting. (2) Part No. F1643500, 3/4″ hose x 1” FBSP hose tail fitting. (3) Part No. F1548500, 3/4″ hose x 1” MBSP 90˚ fitting. (4) Part No. F1548400, 3/4″ hose x 1” FBSP 90˚ fitting. (5) Part No. F1517900, 1” MBSP x 1” FBSP swivel. (6) Part No. F1643300, 1” FBSP 90˚ socket. (7) Part No. F1643400, 1” FBSP linear socket. Part No. F00611D10. Part No. F1607400, NPT/NPT. Part No. F1645800, BSP/NPT. Part No. F1607300, BSP/BSP. (1) (2) (3) (4) (5) (6) (7) STAINLESS STEEL FITTING 3/4″ hose x 3/4” M.BSP swivel hose tail fitting Part No. F1413200. www.greggdistributors.ca SP04-19 LLOYDS LABORATORIES LLO/2667 Chemical Products SPIDER CONTROL Contains natural ingredients from chrysanthemum flower. Water based formulation (solvent free). Acts as a long lasting deterrent of insects for up to 8 weeks. For spiders, ants, cockroaches, crickets, centipedes, and silverfish. The only effective relief from spider webs and spider spots. Part No. 00555, 350 g aerosol. IN-SPEC A strong deterrent for crawling and flying insects. Broad spectrum natural insecticide for spiders, ants, flies, and roaches. Residual effect for long lasting performance. Economical 1 liter liquid trigger spray. Biodegradable ingredients and non WHMIS controlled. Part No. 00556, 1 L bottle. RED LITHIUM GREASE A speciality lithium complexed, multi-operational lubricating grease. Particualarly useful in applications with extremes of -40°C to 171°C. Part No. 61614, 300 g aerosol. SALT SHIELD - WATER-BASED SALT REMOVER & CORROSION PREVENTER Removes grease, oil, stains, odours, smoke, mold, pet accidents, tar, wax, air borne dirt, sap, and many others. •All-purpose cleaning and degreasing •Biodegradable •Dilute a d surface su ace cleaning c ea 4:1 for heavy degreasing •10:1 for hard •Non-abrasive Part No. 57601, 1 L bottle. Part No. 57622, 935 ml trigger sprayer. er. Part No. 57620, 20 L pail. TECHNICAL DATA pH: 11.0 Colour: Purple Biodegradability: 100% in 28 days XTREME CLEAN - MULTI-PURPOSE INDUSTRIAL FORMULA CLEANER DEGREASER A heavy duty water based degreaser that can be diluted 1:200 with water. Based on 100% plant-based surfactants. Free from phosphates, NPE, SLS, and Alcohol Ethoxylates. Non-corrosive and no acids. Cleans and degreases for all heavy-duty industrial applications including oil rigs, felts and equipment in paper mills, waste management, rail, shipping, equipment and truck cleaning. Can be used with pressure ressure washer, manual ma cleaning, and brushless tunnel. Part No. 58605, 400 g aerosol. y. Part No. 58622, 935 ml trigger spray. Part No. 58601, 1 L bottle. Part No. 58620, 20 L pail. Part No. 58645, 205 L drum. TECHNICAL DATA pH: 12.0 Colour: Amber Biodegradability: 100% in 28 days y SP04-20 GREGG DISTRIBUTORS LTD. A very highly active sulfuric acid based drain opener. Works fast on organic waste, paper, grease clogs, and soap. Inhibited to prevent corrosion. Great for clogged drains, large floor drains, cesspools, and regular drain maintenance. Part No. 99550, 1 L bottle. TOILET BOWL CLEANER Salt neutralizer and salt remover liquid concentrate effectively removes salt residue from pores in metal and other surfaces to prevent rust and corrosion. Use on salt spreaders, snowplows, truck boxes and truck chassis for maximum longevity. Salt Shield contains actives that dissolve, release and remove salt crystals from any surface. It will work to protect against salt corrosion and reduces costly repairs caused by salt. Highly effective corrosion inhibitors leave a protective film on surface until surfaces are again exposed to water. Will not strip wax or cause streaks or spots. Spray on diluted product or use pressure/power washer. Biodegradable and non toxic to humans and the environment. Concentrated, can be diluted to 1 to 512 parts water. Do not rinse off product with water after application or corrosion inhibition is reduced. Protects aluminum, copper, brass, mild steel with over 99% effectiveness. Part No. 27220, 500 g aerosol. Part No. 27104, 4 L jug. Part No. 27120, 20 L pail. TECHNICAL DATA Part No. 27145, 205 L drum. pH: 6.0 - 7.0 Colour: Amber PURPLE POWER - CLEANER CONCENTRATE DRAIN OPENER A hydrochloric acid based economical bowl cleaner for cleaning, disinfecting and descaling toilets, urinals, etc. Synergistically inhibited for plumbing protection. Works for the strongest rust and scale. Part No. 99520, 1 L bottle. PURE CLEAN CARPET & FABRIC CLEANER Formulated as an environmentally safe, non-hazardous product. Low foaming and highly effective in the cleaning of grease, mildew, molds, and stains from carpets and hard surfaces. It leaves a fresh pleasant odour based on natural extracts from orange and lemon peels. Use with carpet steam cleaners or bucket dilution method. Part No. 72820, 20 L pail. TECHNICAL DATA PH: 9.0 Biodegradability: 100% 28 days LLOYDS LABORATORIES LLO/2667 Chemical Products AD OFF GRAPHIC LABEL/ DECAL REMOVER Softens graphics and removes adhesive residue from all self-adhesive stickers and applied graphics on all surfaces. Makes light work of a very difficult task. •Low odour •User friendly •Professional performance Part No. 77401, 535 ml spray bottle. Part No. 77404, 4 L jug. Part No. 77420, 20 L pail. CONCRETE REMOVER/ MOVER/ CLEANER - ACID BASED/ BUFFERED Suitable for heavy-duty applications such as cleaning concrete trucks. •Fast acting and non-fuming acid for removal of cement •Contains corrosion inhibitors - will not be harmful and has a pleasant cherry odour •Contains wetting agent and penetrates to help speed up concrete dissolution Part No. 87120, 20 L pail. Part No. 87145, 205 L drum. CONCRETE CURE & SEAL - CONCRETE GUARD & SOLVENT BASED SEALER - WATER BASED Made for curing, sealing, hardening, and dust proofing concrete. Non-yellowing, stabilized copolymer resins giving excellent stain resistance, colour enhancing and protective glossy finish. Used for interior and exterior use. Part No. 86120, 20 L pail. Part No. 86145, 205 L drum. Premium satin finish, water based acrylic sealer that provides a tough flexible water resistant film for new or old concrete or terazzo floors. Non-yellowing and durable. Part No. 85120, 20 L pail. Part No. 85145, 205 L drum. MÖLNLYCKE/TORK M MOL/2740/2741 Paper & Hygiene Products Please note: Mölnlycke/Tork Paper & Hygiene Products are sold in case lots only. Part No. Description Size Case Quantity Recommended Dispenser General Duty Wipers 290089 TORK H1 Advanced Hand Towel Roll, white, 1-ply 7.75” x 700 ft. 6 rolls 5511201 ELEVATION™ INTUITION® HAND TOWEL ROLL DISPENSER The Tork Elevation Intuition Dispenser presents the most advanced electronic system in the industry today. The touch-free electronic Tork Elevation Intuition® virtually eliminates cross contamination while cutting back on supply waste. Each unit features a choice of two dispensing modes. The towel remains inside the cabinet until the user activates the sensor, delivers maximum hygiene. An adjustable towel length of 8” to 24”, and a stub roll compartment combine to deliver more precise control of consumption are a few of the features available. Batteries lasts up to 40 rolls on average with normal usage. It’s easy to reach and simple to reload. Versatile Installation - Elevation Intuition® can be mounted directly to wall or within a recessed compartment. Numerous back-plate mounting slots fit most any pattern. Uses 3 “D size” batteries. Part No. 5511201, For H1 Roll Towels. MMM/2724 MECHANIX WEAR® Professional Gloves HI-VIS ORANGE FASTFIT® GLOVE •Reflective 3M strip panel across top of hand for added visibility •Anatomically cut two-piece palm eliminates bunching for a snug fit •Trek-Dry® material helps keep top of the hand cool and comfortable during warm weather •Elastic cuff provides a secure, second-skin fit with easy on/off flexibility •Machine washable •Conforms to CE 3121 and ANSI 107 Part No. MFF-09-008, Small/size 8. Part No. MFF-09-009, Medium/size 9. Part No. MFF-09-010, Large/size 10. Part No. MFF-09-011, X-large/size 11. Part No. MFF-09-012, 2X-large/size 12. www.greggdistributors.ca SP04-21 SLIP-N-GRIP® SNG/3177 Vehicle Service Products SEAT COVERS Seat Jacket™ SEAT COVERS Slip-N-Grip® seat covers are manufactured in the USA and are the only interior protection used in both OEM and aftermarket applications. The multi-layer construction ensures that they stay in place throughout the entire service process. The bottom layer grips the seat to stay in place while the slick top layer allows easy entry and exit from the vehicle. Slip-N-Grip® seat covers tell customers that you care – and save the automotive service center money! Slip-N-Grip® seat covers deliver unmatched quality and performance, and are disposable p and recyclable. y Seat Jacket™ is specially designed to protect seats during ring an and the pre-owned vehicle prep process, keeping seats clean looking like new. Seat Jacket™ conveys quality and care, re, delivering a premium customer experience and giving pre-owned -owned vehicle dealers a competitive edge. Features: •Similar to the seat cover we manufacture forr over 90% of North American OEMs •Clings, covers, protectss •Fitted/contoured styling •Advanced Slip-N-Grip® technology ogy •Fits most vehicles •Guaranteed quality and durability •Recyclable yclable ocket Part No. FG-P9943-16, 36” x 57” seat jacket, double pocket seat cover. 50 per roll. BEST Part No. FG-P9943-20, 32” x 56” seat cover. 200 per roll. BETTER Part No. FG-P9943-14, 32” x 56” seat cover. 250 per roll. Part No. FG-P9943-10, 32” x 56” seat cover. 250 per box. GOOD Part No. FG-P9943-15, 32” x 52” seat cover. 500 per roll. LARGE CAR COVERS •Dust protection •Temporary car cover •Clear Part No. FG-P9943-22, 13.6 ft. x 25 ft. 30 per roll.l. PLASTIC FLOOR MAT •Slip-N-Grip® multi-layer construction ensures floor mat stays in place •Impervious to water, oil, grease and most shop chemicals •Mat says, “We Take Pride in Your Vehicle.” Part No. FG-P9943-02, 16.5” x 21” floor mat. 500 per roll. ADHESIVE FLOOR MATS •Perfect for detail shops, car washes, used car dealers, showrooms and RV outlets •21” x 24” clear mat is a full 3.0 mil thick with high-strength adhesive coating •Stay-in-place protection for up to 30 days Part No. FK-P9933-61, Custom dispenser and combo kit. Part No. FB-P9933-49, 21” x 24” mat. 300 ft. roll. TIRE BAGS •Contains a minimum of 15% GreenPE® recycled resin •Ideal when returning old tires or snow tires for storage •White Part No. FG-P9943-29, 36” x 40” standard tire bags. 250 per roll. Part No. FG-P9943-28, 39” x 44” large heavy-duty tire bags. 100 per roll. Part No. FG-P9933-92, 39” x 44” large tire bags. 250 per roll. Part No. FG-P9933-91, 47” x 48” x-large tire bags. 125 per roll. STEERING WHEEL COVERS •Elastic design is easier to apply and remove than stretch wrap covers •Double-band and shower-cap styles Part No. FB-P9943-36, 24” cover, double band. 250 per box. Part No. FB-P9943-33, 24” cover, double band. 500 per box. Part No. FB-P9943-35, 28” cover, double band. 250 per box. Part No. FB-P9933-82, 24” cover, shower cap. 500 per box. KRAFT PAPER FLOOR GEAR SHIFT COVERS “CHECK YOUR OIL •Fits most vehicles •5” x 17” FREQUENTLY” MAT Part No. FB-P9833-98, 500 per box. SERVICE REMINDER •Keep dirt, grease, oil, spills, leaks Part No. FB-P9943-80, 1000 per or other shop fluids out of your LABELS customer’s vehicle during service •17” x 19” Part No. M1765KR1965A, 500 per box. box. Double Band •Stick-on label with fill-in boxes as a reminder for your next oil change Part No. FB-P9944-30, 500 per roll. Shower Cap KEY TAG •Paper key tags with metal rings Part No. FB-P9833-13, 1000 per case. GRIP-N-GUARD® Masking Film SELF-ADHERING MASKING FILM GripNGuard clings to virtually any surface with minimal or no taping required. The outer surface of GripNGuard has been tested to retain dust 3½ times better than most plastic drop cloths. Dust, paint, sawdust and other airborne particles cling to the GripNGuard surface and are not reintroduced to the area during repositioning or cleanup. That means less clean up time, lower costs and higher profits. .31 mil gauge. Part No. FG-P9943-77A, 9 ft. x 400 ft. Part No. FG-P9934-16, 12 ft. x 400 ft. SP04-22 GREGG DISTRIBUTORS LTD. ADHESIVE CRASH WRAP •36” x 100’ roll Part No. FB-P9943-41. SNG/3177 CHE/1568 CHECKERS INDUSTRIAL Gorilla® Warning Whips ALL PURPOSE WATERPROOF LIGHTED WARNING WHIPS •Gorilla® All Purpose Waterproof Warning Whip with stainless steel components sets the new standard for weather resistance in any working conditions. •These whips are ideal for extreme weather conditions such as coastal areas, corrosive environments, salt mines, and areas with high humidity. •Rocket™ II Super Bright Waterproof LED comes standard with 9 changeable light modes, 7 flash patterns, and steady on or off, which provides a “one light fits all” solution •Premium fiberglass resin creates the strongest whip in the industry •Internal wire is industrial grade and meets Military Spec MIL-W-16878 •Includes a two conductor waterproof hot plug with 12” pigtail, heavy duty Day Bright™ fluorescent nylon mesh flag with 3M® Scotchlite® reflective X, Rocket™ II Super Bright Waterproof Amber LED light, and a stainless steel threaded hex base Part No. APW-12-A-OA, 12 ft. Part No. APW-10-A-OA, 10 ft. Part No. APW-8-A-OA, 8 ft. Part No. APW-6-A-OA, 6 ft. Part No. APW-5-A-OA, 5 ft. Part No. APW-3-A-OA, 3 ft. REMOTE CONTROL •Light patterns are easy to program with remote control •(9) Flash patterns: -Breathe followed by 16 strokato flashes -Rapid flash -Brighten then flash -Breathe then flash -Slow blink -Flash -Steady -Increasing sequential blinks -Off Part No. REMOTE. REPLACEMENT PARTS Part No. A-4LED-CB, Amber 4 LED C Board. Part No. B-4LED-CB, Blue 4 LED C Board. Part No. G-4LED-CB, Green 4 LED C Board. Part No. R-4LED-CB, Red 4 LED C Board. Part No. W-4LED-CB, White 4 LED C Board. Part No. RKT-4-LENS, Clear lens. Part No. WPP-12, 12” Waterproof Pigtail. Hitch Mounts 2” hitch mount with threaded hex base and 24” power cord with 7-way plug Part No. FS7015PC. 2” hitch mount with threaded hex base and 24” power cord with 7-way plug and backup alarm Part No. FS7015PC-BU. 2” permanent hitch mount for Super Whip and Heavy Duty Gorilla Whip with 7-way power cord Part No. FS7015-PT. NAOKA INC. AUR/2916 Safety Whips AURORA SAFETY WHIPS Each Vehicle Safety Whip is Canadian made in Northern Alberta. Naoka’s Quality Assurance process meets Canadian Standards, Exceeds OSSA Requirements, and Redefines Industry Benchmarks for Safety Equipment. Aurora Whip Main Highlights: •Unit is highly visible from a distance - vehicles equipped with the Aurora Whip will be noticed by larger equipment operators in any weather condition, day or night! •Yellow Flexible Fiberglass Rod provides added safety detection particularly in the winter months •The 24 encased amber LEDs provides 360° of light Additional Information: •Naoka research and development testing facility immersed the whip in 3 ft. of water concluding that this product is watertight; reducing instances of replacement because the elements cannot penetrate Aurora Whip wiring •Methacrylate adhesive that absorbs vibration, resists impact, fatigue, thermal cycling/ extremes (-55°C to 121°C) and a tensile strength of 4,500 lbs. •9,500 psi shatterproof refractive material disperses lighting •Florescent vinyl mesh will overcome the objections from whipping such as cracking, peeling or fraying •Flame resistant, weather resistant, ultraviolet resistant, temperature stable. Flexible enough to withstand repeated impacts without breaking. •Steel Spring and Hex-base are also secured with marine grade materials to prevent water ingression •Military approved polyolefin, remains flexible to -55°C, resists diesel fuel, hydraulic fluid, lubricating oils •All wiring is well made and insulated to deal with extreme temperatures and exposure to industrial conditions Part No. AUR3F, 3 ft. Part No. AUR5F, 5 ft. Part No. AUR8F, 8 ft. Part No. AUR10F, 10 ft. www.greggdistributors.ca SP04-23 LIFT SUPPORT QQQ/2558/2559 Gas Spring Lift Supports GAS SPRINGS •Gas Springs are typically used for assisting in lifting a lid as well as holding it open, similar to how a hatchback on a car operates. They are also used on access covers, doors, windows, conveyors, adjustable table and seats, and more. •All gas springs contain pressurized nitrogen gas as well as hydraulic fluid that lubricates the seal and provides slam-resistant dampening at the end of the stroke. You should store and install gas springs rod-end down for longer service life. •The chart below shows universal lift supports which are not application specific, BLACK NITRATED “B” SERIES GAS SPRINGS All measurements are taken from center of eye or ball stud located at 18 mm centers. The Nitrate Gas Springs come with composite end fittings. Part No. Extended Compressed Force (lbs.) Rod x Tube Diameter B1 - 6 x 15 mm B1-0800-0250-020 8” 5.5” 20 B3 - 8 x 18 mm B1-0800-0250-040 8” 5.5” 40 B5 - 10 x 22 mm B1-0800-0250-060 8” 5.5” 60 B1-1000-0300-040 10” 7” 40 B1-1000-0300-060 10” 7” 60 B1-1000-0300-080 10” 7” 80 B1-1200-0300-040 12” 9” 40 B1-1200-0300-060 12” 9” 60 B1-1200-0300-080 12” 9” 80 B1-1500-0550-040 15” 9.5” 40 B1-1500-0550-060 15” 9.5” 60 B1-1500-0550-080 15” 9.5” 80 B1-1700-0675-040 17” 10.25” 40 B1-1700-0675-060 17” 10.25” 60 B1-1700-0675-080 17” 10.25” 80 B1-1950-0800-060 19.5” 11.5” 60 B1-1950-0800-080 19.5” 11.5” 80 B1-2000-0800-040 20” 12” 40 B1-2000-0800-060 20” 12” 60 B1-2000-0800-080 20” 12” 80 B3-1200-0400-030 12” 8” 30 B3-1200-0400-090 12” 8” 90 B3-1200-0400-120 12” 8” 120 B3-1500-0500-030 15” 10” 30 B3-1500-0500-090 15” 10” 90 B3-1500-0500-120 15” 10” 120 B3-1700-0600-040 17” 11” 40 B3-1700-0600-060 17” 11” 60 B3-1700-0600-090 17” 11” 90 B3-2000-0800-080 20” 12” 80 B3-2000-0800-100 20” 12” 100 B3-2000-0800-120 20” 12” 120 B3-2000-0800-150 20” 12” 150 B3-2600-1050-060 26” 15.5” 60 B3-2600-1050-090 26” 15.5” 90 B3-2600-1050-120 26” 15.5” 120 B5-2700-1175-060 27” 15.25” 60 B5-2700-1175-100 27” 15.25” 100 B5-2700-1175-120 27” 15.25” 120 B5-2700-1175-150 27” 15.25” 150 B5-2775-1000-200 27.75” 17.75” 200 B5-2800-1200-230 28” 16” 230 GAS SPRING HARDWARE Part No. 790110Z, 10 mm steel zinc stud. Part No. 790810Z, 10 mm steel zinc plate. Part No. 40302003, 6 x 1 mm end fitting 10 mm ball. Part No. 40302004, 8 x 1.25 mm end fitting 10 mm ball. Part No. 40302007, 6 x 1 mm end fitting 10 mm ball. Part No. 40302008, 8 x 1.25 mm end fitting 10 mm ball. Part No. 40303018, 6 x 1 mm blade style end fit. Part No. 40303002, 8 x 1.25 mm blade style end fit. Part No. 43303001, 6 x 1 mm end fitting. Part No. 43305001, 8 x 1 mm HIEM joint fit. Part No. 43305003, 6 x 1.25 mm HIEM joint fit. Part No. 43306001, 6 x 1 mm rod end fitting. Part No. 43306002, 8 x 1.25 mm rod end fitting. BRACKETS - Steel zinc plate, 10 mm ball Part No. 700200Z. Part No. 700500Z. Part No. 710102Z. Part No. 710105Z. Part No. 711302Z. Part No. 711305Z. TEK OPTICAL Universal Sideshields NNN/3725 B52 With patented SafetyWing™ feature. Available in single pairs or convenient packs of 10. Part No. B26, 1 pair, B-26+ Wing-Mate™ sideshield; for small and medium safety frames. Part No. B52, 1 pair, B-52+ Aye-Mate™ sideshield; for small, medium, and large safety frames. COMPLIANCE SAFEPACK™ PLUS The CP-5226 Compliance Safepack™ Plus consists of ten (10) of the patented B-52+ Aye-Mate™ & ten (10) of the patented B-26+ Wing-Mate™ sideshields. Ideally suited to ensure proper selection of the proper sideshield/frame combination. The inclusion of both sideshields in the same package also offers the best solution to a multitude of issues created by hundreds of proprietary temple mounted sideshields and the need to be OSHA compliant. One CP-5226 Compliance Safepack™ Plus easily conquers the challenges posed by OSHA, ANSI, and all of the different frame shapes and sizes from a single dispensing pack. Part No. CP-5226, Safepack™ Plus, contains 10 each #B26 and #B52 sideshields. SP04-24 GREGG DISTRIBUTORS LTD. CP-5226 REVCO SPK/3396 Sprockets 40FB SERIES FINISHED BORE SPROCKETS Finished Bore Sizes Part No. 5/8” 3/4” 1/2” 40FB10-050 40FB10-062 40FB10-075 40FB11-050 40FB11-062 40FB11-075 — 40FB12-062 40FB12-075 — 40FB13-062 40FB13-075 — 40FB14-062 40FB14-075 — 40FB15-062 40FB15-075 — 40FB16-062 40FB16-075 — — 40FB17-075 — — 40FB18-075 — — 40FB19-075 — — 40FB20-075 FB T 1” — — 40FB12-100 40FB13-100 40FB14-100 40FB15-100 40FB16-100 40FB17-100 40FB18-100 40FB19-100 40FB20-100 Hub No. of Teeth Diameter 10 11 12 13 14 15 16 17 18 19 20 1¼* 1-3/8* 1-9/16* 1-9/16 1-11/16 1-13/16 2 2-1/8 2-5/16 2½ 2-5/8 LTB OD 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1.84 2.00 2.17 2.33 2.49 2.65 2.81 2.98 3.14 3.30 3.46 *Recessed groove for chain clearance. LTB 50FB SERIES FINISHED BORE SPROCKETS Finished Bore Sizes Part No. 3/4” 1” 1¼” 50FB10-075 50FB10-100 — 50FB11-075 50FB11-100 — 50FB12-075 50FB12-100 — 50FB13-075 50FB13-100 50FB13-125 50FB14-075 50FB14-100 50FB14-125 50FB15-075 50FB15-100 50FB15-125 HD No. of Teeth Hub Diameter LTB OD 10 11 12 13 14 15 1-9/16* 1¾* 1-63/64* 1-7/8 2-1/8 2-3/8 1 1 1 1 1 1 2.30 2.50 2.71 2.91 3.11 3.32 L1/L2 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-7/16 1-7/16 1-7/16 1-7/16 1-7/16 1-7/16 1-7/16 1-7/16 1-7/16 Weight (lbs.) 0.34 0.40 0.48 0.54 0.60 0.76 0.84 0.92 1.14 1.22 1.30 1.44 1.54 1.72 Bushing L1/L2 Min. Bore Max. Bore 1/2 1¼ 1-1/8 1/2 1¼ 1-1/8 1/2 1¼ 1-1/8 1/2 1¼ 1-1/8 1/2 1¼ 1-1/8 1/2 1-5/8 1-7/16 1/2 1-5/8 1-7/16 1/2 1-5/8 1-7/16 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ Weight (lbs.) 0.34 0.40 0.52 0.60 0.68 0.84 1.04 1.24 1.20 1.32 1.42 1.58 1.70 1.86 2.00 2.32 2.64 *Recessed groove for chain clearance 40Q SERIES SPROCKETS •Q Bushings required Part No. T L1 L2 40JA15 40JA16 40JA17 40JA18 40JA19 40SH20 40SH21 40SH22 40SH23 40SH24 40SH25 40SH26 40SH28 40SH30 O.D. 2.65 2.81 2.98 3.14 3.30 3.46 3.62 3.78 3.94 4.10 4.26 4.42 4.74 5.06 Bushing No. JA JA JA JA JA SH SH SH SH SH SH SH SH SH Min. Bore Max. Bore 1/2 1¼ 1/2 1¼ 1/2 1¼ 1/2 1¼ 1/2 1¼ 1/2 1-5/8 1/2 1-5/8 1/2 1-5/8 1/2 1-5/8 1/2 1-5/8 1/2 1-5/8 1/2 1-5/8 1/2 1-5/8 1/2 1-5/8 50Q SERIES SPROCKETS •Q Bushings required Part No. 50JA12 50JA13 50JA14 50JA15 50JA16 50SH17 50SH18 50SH19 50SDS20 50SDS21 50SDS22 50SDS23 50SDS24 50SDS25 50SDS26 50SDS28 50SDS30 Legend FB - Finished bore of sprocket complete with keyaway and 2 set screws LTB - Length through bore of socket No. of Teeth 15 16 17 18 19 20 21 22 23 24 25 26 28 30 No. of Teeth 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 28 30 O.D. 2.71 2.91 3.11 3.32 3.52 3.72 3.92 4.12 4.32 4.52 4.72 4.92 5.12 5.32 5.52 5.92 6.32 No. JA JA JA JA JA SH SH SH SDS SDS SDS SDS SDS SDS SDS SDS SDS www.greggdistributors.ca SP04-25 REVCO SPK/3396 Sprockets 60Q SERIES SPROCKETS 80Q SERIES SPROCKETS •Q Bushings required Part No. 60JA11 60JA12 60JA13 60SH14 60SH15 60SH16 60SDS17 60SDS18 60SDS19 60SDS20 60SDS21 60SDS22 60SDS23 60SDS24 60SDS25 No. of Teeth 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 O.D. 3.00 3.25 3.49 3.74 3.98 4.22 4.46 4.70 4.95 5.19 5.43 5.67 5.91 6.15 6.39 •Q Bushings required Bushing No. JA JA JA SH SH SH SDS SDS SDS SDS SDS SDS SDS SDS SDS L1/L2 Min. Bore Max. Bore 1/2 1¼ 1-1/8 1/2 1¼ 1-1/8 1/2 1¼ 1-1/8 1/2 1-5/8 1-7/16 1/2 1-5/8 1-7/16 1/2 1-5/8 1-7/16 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ 5/8 2 1½ Weight (lbs.) 0.46 0.60 0.76 0.88 1.08 1.26 1.38 1.56 1.76 2.00 2.20 2.44 2.70 2.94 3.24 Part No. 80SH11 80SH12 80SDS13 80SDS14 80SK15 80SK16 80SK17 80SK18 80SK19 No. of Teeth 11 12 13 14 15 16 17 18 19 O.D. 4.01 4.33 4.66 4.98 5.30 5.63 5.95 6.27 6.59 No. SH SH SDS SDS SK SK SK SK SK Bushing L1/L2 Min. Bore Max. Bore 1/2 1-5/8 1-7/16 1/2 1-5/8 1-7/16 5/8 2 1½ 5/8 2 1½ 5/8 2-5/8 2-1/8 5/8 2-5/8 2-1/8 5/8 2-5/8 2-1/8 5/8 2-5/8 2-1/8 5/8 2-5/8 2-1/8 Weight (lbs.) 1.00 1.40 1.50 1.80 2.50 3.10 3.50 3.90 4.40 T L1 L2 Taper Bushings “Q” BUSHINGS JA Q-JA-050 Q-JA-062 Q-JA-075 Q-JA-088 Q-JA-100 — — — — — — — — — — — — — Bushing Sizes Part No. SH SDS — — Q-SH-062 Q-SDS-062 Q-SH-075 Q-SDS-075 Q-SH-088 Q-SDS-088 Q-SH-100 Q-SDS-100 Q-SH-112 Q-SDS-112 Q-SH-118 Q-SDS-118 Q-SH-125 Q-SDS-125 Q-SH-138 Q-SDS-138 — Q-SDS-143 — Q-SDS-150 — Q-SDS-162 — — — — — — — — — — — — SK — — — — Q-SK-100 Q-SK-112 Q-SK-118 Q-SK-125 Q-SK-138 Q-SK-143 Q-SK-150 Q-SK-162 Q-SK-168 Q-SK-175 Q-SK-188 Q-SK-193 Q-SK-200 Q-SK-212 F Stock Bores Keyseat Sizes 1/2 5/8 3/4 7/8 1 1-1/8 1-3/16 1¼ 1-3/8 1-7/16 1½ 1-5/8 1-11/16 1¾ 1-7/8 1-15/16 2 2-1/8 1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 1/4 x 1/8 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 3/16 3/8 x 3/16 3/8 x 3/16 3/8 x 3/16 1/2 x 1/4 1/2 x 1/4 1/2 x 1/4 1/2 x 1/4 E D L DIMENSIONS Bushing Size JA SH SDS SK D L E F 2 2-11/16 3-3/16 3-7/8 1-1/16 1-5/16 1-3/8 1-15/16 11/16 7/8 7/8 1-3/8 3/8 7/16 1/2 9/16 Wrench Torque 5 9 9 15 Weight (lbs.) 0.80 1.00 1.20 2.00 Jaw Couplings ‘L’ SERIES (LOVEJOY STYLE) FLEXIBLE JAW COUPLINGS 1/4” 5/16” 3/8” 1/2” 5/8” L050-025 L050-031 L050-038 L050-050 L050-062 — — — L070-050 L070-062 — — — L075-050 L075-062 — — — L090-050 L090-062 — — — L095-050 L095-062 — — — L099-050 L099-062 — — — L100-050 L100-062 — — — — L110-062 — — — L150-062 — Bore Sizes (Standard Keyways) Part No. 3/4” 7/8” 1” — — — L070-075 — — L075-075 L075-088 — L090-075 L090-088 L090-100 L095-075 L095-088 L095-100 L099-075 L099-088 L099-100 L100-075 L100-088 L100-100 L110-075 L110-088 L110-100 — — — RUBBER (BUNA-N) INSERTS •Temperature Range: -40°C to 100°C Part No. N050, Fits L050. Part No. N070, Fits L070. Part No. N075, Fits L075. Part No. N090/095, Fits L090 and L095. Part No. N099/100, Fits L099 and L100. Part No. N110, Fits L110. Part No. N150, Fits L150. HYTREL® INSERTS Dimensions 1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-5/8” — — — — — — — — — — — — — — — — — — — — L095-112 — — — — L099-112 — — — — L100-112 L100-125 L100-138 — — L110-112 L110-125 L110-138 L110-150 L110-162 — — — — — •Temperature Range: -51°C to 121°C Part No. H050, Fits L050. Part No. H070, Fits L070. Part No. H075, Fits L075. Part No. H090/095, Fits L090 and L095. Part No. H099/100, Fits L099 and L100. Part No. H110, Fits L110. Part No. H150, Fits L150. C B SP04-26 GREGG DISTRIBUTORS LTD. C B 15/32 1/2 1/2 1/2 1/2 3/4 3/4 7/8 1 1-23/32 2 2-1/8 2-1/8 2½ 2-7/8 3½ 4¼ 4½ Weight Min. Max. Bore Bore 0.3 0.2 0.6 0.4 1.0 0.8 1.5 1.2 1.8 1.3 2.5 2.0 3.5 2.5 6.6 5.0 9.1 7.0 REVCO SPK/3396 Flexible Couplings F ‘R-FLEX’ FLEXIBLE COUPLINGS 1/2” 3J-050 4J-050 — — 5/8” 3J-062 4J-062 5J-062 6J-062 3/4” 3J-075 4J-075 5J-075 6J-075 Bore Sizes Part No. 7/8” 1” — — 4J-088 4J-100 5J-088 5J-100 6J-088 6J-100 Coupler Dimensions 1-1/8” — — 5J-112 6J-112 1¼” — — — 6J-125 1-3/8” — — — 6J-138 OL 1-31/32 2-11/32 2-27/32 3-11/32 OD 2.06 2.46 3.25 4.00 Flange Only Dimensions RD* 5/8 5/8 13/16 1 *Distance required to remove sleeve (1) Nominal dimensions (for reference only) G(1) 3/8 5/8 3/4 7/8 OL OL 51/64 55/64 1-3/64 1-15/64 OL OD 2.06 2.46 3.25 4.00 HD 1¼ 1-5/8 1-7/8 2½ •Temperature Range: -34°C to 135°C Part No. 3JE, Fits 3J. Part No. 4JE, Fits 4J. Part No. 5JE, Fits 5J. Part No. 6JE, Fits 6J. Part No. 7JE, Fits 7J. Part N No. 8JE, Fits 8J. OD OD Flange HL 13/32 27/64 29/64 39/64 RUBBER (EPDM) INSERTS RD HD HL T 25/64 7/16 19/32 5/8 G Coupler LINK-BELT L ROL/3397 Chain Repair Tools CHAIN BREAKERS BREAK Chain breakers are quality tools with forged jaws. The “push-out” pins are of tempered alloy steel. They simplify the disassembly of roller chain. Part No. CB3550, #35-50. Part No. CB60100, #60-100. TECHSPAN T TEC/3760 Deutsch Connectors 4-WAY INDENT CRIMP TOOL Ratchet mechanism releases only after proper crimp force is applied assuring reliable connections every time. Locator holds contacts in place during the crimping process. This tool can also be used to crimp closed/solid barrel, screw machine pin and socket style contacts. Performs a simultaneous 4-way indent crimp for superior contact retention. Approximate length: 6½”. Contact Size: 22-16GA. Part No. 76-3352EA. 98 PC. DEUTSCH CONNECTOR ASSORTMENT KIT This handy assortment comes complete with 98 pieces/sets of widely used (DTSeries) Deutsch Connectors (18 types in all) in a plastic storage tray. Each part number is indexed on an affixed reference chart for easy identification and quick reorder. Dimensions: 11”W x 6”L x 1”H Part No. 76-3353EA. Kit Contains: Reference No. 76-3306 76-3307 76-3308 76-3309 76-3314 76-3315 76-3316 76-3317 76-3324 MID/2802 Deutsch # Quantity 0462-201-16141 0460-202-16141 0462-209-16141 0460-215-16141 1062-16-0622 1060-16-0622 1062-14-0122 1060-14-0122 DT04-2P + W2P 10 10 10 10 10 10 10 10 2 Reference No. 76-3325 76-3326 76-3327 76-3328 76-3329 76-3330 76-3331 76-3332 76-3333 Deutsch # Quantity DT06-2S + W2S DT04-3P + W3P DT06-3S + W3S DT04-4P + W4P DT06-4S + W4S DT04-6P + W6P DT06-6S + W6S DT04-08P + W8P DT06-08S + W8S 2 2 2 2 2 2 2 1 1 HALDEX Piggyback Kits LIFE SEAL SPRING BRAKE PIGGYBACK KIT •Special Heat Treated Power Spring results in unsurpassed force output consistency and superior fatigue life •Patented Internal Check Valve; Relieves any pressure build-up in the sealed spring chamber and prevents outside air and contaminants from entering the chamber •Adapter Seal and Bearing; Custom design EGP guide bearing and o-ring provide a long lasting and air-tight seal •Save Time and Money; Piggyback kits are simple to install Part No. LP3030K. Part No. LP3030LK, Long stroke. GOLD SEAL SPRING BRAKE PIGGYBACK KIT •Superior Power Spring Technology; Advanced powder coating process; Resists corrosion and fatigue •Double O-ring Centerseal; Two o-rings for positive sealing and plastic bearings for long life •Save Time and Money; Piggyback kits are simple to install Part No. GP3030K. Part No. GP3030LK, Long stroke. www.greggdistributors.ca SP04-27 ALBERTA BRITISH COLUMBIA EDMONTON - Main Ph: (780) 4-GREGGS (447-3447) Fax: (780) 451-2528 FORT ST. JOHN Ph: (250) 785-8000 Fax: (250) 785-8022 EDMONTON - East Ph: (780) 450-2233 Fax: (780) 450-2266 LANGLEY Ph: (604) 888-9588 Fax: (604) 888-4688 EDMONTON - South Ph: (780) 409-2000 Fax: (780) 409-2100 NANAIMO Ph: (250) 756-0551 Fax: (250) 756-1170 NISKU Ph: (780) 979-9988 Fax: (780) 979-9989 SASKATCHEWAN ATHABASCA Ph: (780) 675-3110 Fax: (780) 675-4774 CALGARY - Main Ph: (403) 253-6463 Fax: (403) 253-5926 SASKATOON Ph: (306) 343-6655 Fax: (306) 343-6656 www.greggdistributors.ca di ib CALGARY - Foothills Ph: (403) 203-1928 Fax: (403) 236-1912 CLAIRMONT Ph: (780) 567-2238 Fax: (780) 567-2239 DRAYTON VALLEY Ph: (780) 621-0056 Fax: (780) 621-0057 FAIRVIEW Ph: (780) 835-5115 Fax: (780) 835-3535 FORT MCMURRAY Ph: (780) 715-4000 Fax: (780) 743-8833 GRANDE PRAIRIE Ph: (780) 513-4000 Fax: (780) 513-6000 HIGH LEVEL Ph: (780) 926-2521 Fax: (780) 926-3514 RAINBOW LAKE Ph: (780) 956-2588 Fax: (780) 956-2589 RED DEER Ph: (403) 341-3100 Fax: (403) 341-3210 SPIRIT RIVER Ph: (780) 864-3333 Fax: (780) 864-3330 STRATHMORE Ph. (403) 934-3710 Fax (403) 934-5453 Items may not be exactly as illustrated. Quantities on some items may be limited. Errors are subject to correction. ©2014 Gregg Distributors Ltd. All rights reserved. Proudly Canadian!
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project