Radio Shack Big Button Phone Specifications

Radio Shack Big Button Phone Specifications
13-Number Memory
Big Button Phone
43-3261
Introduction
Thank you for purchasing the RadioShack
13-Number Memory Big Button Phone. The
ringer volume and listening volume can be
adjusted using the included AC adapter and the
sliding VOLUME control. Up to 10 standard
phone numbers can be stored in memory, as well
as three emergency numbers (fire, police,
ambulance).
Your telephone connects directly to a modular
telephone line jack. If your telephone wiring does
not have a modular jack, you can update the
wiring yourself using jacks and adapters
(available at your local RadioShack store), or
have the telephone company update the wiring
for you. You must use compatible modular jacks
that are compliant with Part 68 of FCC Rules and
the requirements adopted by the ACTA. The
telephone cord and modular plug provided is Part
68 compliant for connecting to the telephone
company network.
What’s Included
• Telephone Base
• Telephone Handset
• Mounting Bracket
• AC Adapter
•
•
•
•
Coiled Handset Cord
Long Line Cord
Short Line Cord
Memory/Index Card
AC Adapter — For
amplified ringer volume,
connect the adapter’s
barrel plug to the phone’s
DC 9V jack. Connect the
other end to a standard
AC outlet. When the
adapter is connected, the
keypad lights when you lift
the handset.
!
The lightning symbol is intended
to alert you to the presence of
uninsulated dangerous voltage
within this product’s enclosure that might
be of sufficient magnitude to constitute a
risk of electric shock. Do not open the
product’s case.
Mounting
Bracket
The exclamation symbol is
intended to inform you that
important operating and
maintenance instructions are
included in the literature
accompanying this product.
Attach the Mounting Bracket
1. Position the mounting
bracket as shown.
2. Align the bracket tabs with
the slots on the phone’s
base.
3. Snap the bracket into
place.
Step Two
Mount and Connect the Phone
On a Wall
MEMORY — Press MEMORY, then
press the memory location number
to automatically dial from memory.
Or, press after entering a phone
number to store.
FLASH — Press to answer an incoming call while
you are talking (if you have Call Waiting service).
Press again to return to the previous call. If you do not
have Call Waiting, pressing FLASH can disconnect
the current call.
STORE — Press
STORE, then enter a
number to store in
memory. Press again
after you enter the phone
number to confirm.
LOUD — To adjust listening level,
press LOUD, and then slide VOLUME
to the desired listening level setting
during a call. When you hang up and
make or receive another call, you must
press LOUD again before adjusting
VOLUME.
TONE PULSE — Slide to TONE or
PULSE to select the desired dialing
mode (depends on you phone service).
Press * during a call to switch from
pulse to tone dialing.
REDIAL — Press to
automatically dial the last
phone number you
called.
HOLD — Press to place a call
on hold. HOLD lights. To
resume the call, press the
switchhook or lift the handset.
Base
Wall or
Wall Plate
2.
Thread a screw (not supplied) into each hole,
letting the heads extend about 3/16 inch from the
wall.
3.
Fit the keyhole slots over the screw heads and
slide the phone downward to secure it.
Fit the keyhole slots over the wall plate studs. Slide
the phone downward to secure it.
Connections
LINE Jack — Connect
line cord here.
DC 9V Jack — Connect
adapter here for amplified
ringer volume, and to
activate the lighted keypad.
1. Drill two vertical holes 315/16 inches apart.
On a Wall Plate
Ring Indicator — Flashes when
an incoming call is received.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
!
Step One
Long Line Cord
Short Line Cord
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or
..CAUTION..
Memory/Index Card —
Write down important
numbers for quick
reference. You can also
write in the names and/or
numbers stored in
memory.
Coiled Handset Cord —
Connects handset to base.
moisture.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Base
Handset
HI LO OFF RINGER —
Slide to the desired
setting to set the ringer
volume.
1.
Connect the coiled handset cord to the jacks on
the base and the handset.
2.
If your phone is mounted on the wall, connect
the long line cord to the phone’s LINE jack.
Connect the other end to a wall jack.
3.
If your phone is mounted on a wall plate,
connect the short line cord to the phone’s LINE
jack. Connect the other end to a wall jack.
Step Three
Step Four
Care
Storing Telephone Numbers
Making and Receiving Calls
Up to 10 phone numbers and three emergency
numbers can be stored.
Making a Call
Keep the phone dry; if it gets wet, wipe it dry
immediately. Use and store the phone only in room
temperature environments. Handle the phone
carefully; do not drop it. Keep the phone away from
dust and dirt, and wipe it with a damp cloth
occasionally to keep it looking new.
1. Lift the handset.
2. Press STORE.
3. To store phone numbers, key in the desired
telephone number, and then press STORE. Then,
press 0–9 to select the storage location.
To store emergency numbers (fire , police , or
ambulance ), key in the emergency phone
number. Then press , , or to select the
storage location.
•
•
To make a call, lift the handset and key in the telephone number.
To dial a stored number, lift the handset and press MEMORY. Then, press
the memory location number (0-9).
• To dial a stored emergency number, lift the handset and press , , or .
Note: If you want to test the stored emergency number, make a test call and
remain on the line to explain the reason for your call.
Receiving a Call
When the phone rings, lift the handset.
4. To delete a stored number, simply store a new
number in its place.
If your phone is not performing as it should, take it
to your local RadioShack store for assistance. To
locate your nearest RadioShack, use the store
locator feature on RadioShack's website
(www.radioshack.com), or call 1-800-The Shack
(843-7422) and follow the menu options. Modifying
or tampering with the phone's internal components
can cause a malfunction and might invalidate its
warranty and void your FCC authorization to
operate it.
Limited 1-Year Warranty
FCC Statement
Your phone complies with Part 68 of FCC Rules. You must, upon request, provide
the FCC registration number and the REN to your telephone company.
Note: You must not connect your phone to:
•
coin-operated systems
•
most electronic key telephone systems
•
party-line systems
Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission, or corporation commission for
information. We have designed your phone to conform to federal regulations, and
you can connect it to most telephone lines. However, each phone (and each
device, such as a telephone or answering machine) that you connect to the
telephone line draws power from the telephone line. We refer to this power draw as
the device's ringer equivalence number, or REN on the bottom of your phone. If you
use more than one phone or other device on the line, add up all of the RENs. If the
total is more than five (three in rural areas), your telephones might not ring. If ringer
operation is impaired, remove a device from the line. In the unlikely event that your
phone causes problems on the phone line, the phone company can temporarily
discontinue your service. If this happens, the phone company attempts to notify you
in advance. If advance notice is not practical, the phone company notifies you as
soon as possible and advises you of your right to file a complaint with the FCC.
Also, the phone company can make changes to its lines, equipment, operations, or
procedures that could affect the operation of this telephone. The telephone
company notifies you of these changes in advance, so you can take the necessary
steps to prevent interruption of your telephone service.
Service and Repair
Surge Protection
Your telephone has built-in protection circuits to reduce the risk of damage from
surges in telephone line and power line current. These protection circuits meet or
exceed the FCC requirements. However, lightning striking the telephone or
power lines can damage your telephone.
Lightning damage is not common. Nevertheless, if you live in an area that has
severe electrical storms, we suggest that you unplug your phone when storms
approach to reduce the possibility of damage.
If your home has specially wired alarm equipment connected to the telephone
line, ensure the installation of this telephone does not disable your alarm
equipment. If you have any questions about what will disable alarm equipment,
consult your telephone company or a qualified installer.
Note: The USOC number of the jack to be installed is RJ11C (or RJ11W for a
wall plate jack).
Caution: You must use a Class 2 power source that supplies 9V DC and delivers
200mA. Its center tip must be set to positive and its plug must fit the phone's DC
9V jack. The supplied adapter meets these specifications. Using an adapter that
does not meet these specifications could damage the phone or the adapter.
Your phone is ETL listed to UL standards and meets applicable FCC
requirements.
This product is warranted by RadioShack against manufacturing defects in material and workmanship
under normal use for one (1) year from the date of purchase from RadioShack company-owned stores
and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS
PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR
DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO,
ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY,
REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation
of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales
receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless
otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor;
(b) replace the product with one of the same or similar design; or (c) refund the purchase price. All
replaced parts and products, and products on which a refund is made, become the property of
RadioShack. New or reconditioned parts and products may be used in the performance of warranty
service. Repaired or replaced parts and products are warranted for the remainder of the original
warranty period. You will be charged for repair or replacement of the product made after the expiration
of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other
than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or
batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product
removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
©2004 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are
trademarks used by RadioShack Corporation.
43-3261
Printed in China
01A04
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement