Samsung SCH-R600 User manual

Cover.fm Page 1 Thursday, May 7, 2009 4:43 PM
R600
B Y
S A M S U N G
( S C H - R 6 0 0
P O R T A B L E
M O B I L E
S e r i e s )
D U A L - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Cover.fm Page 2 Thursday, May 7, 2009 4:43 PM
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:Customer Care Center:
1301 E. Lookout Drive1000 Klein Rd.
Richardson, TX 75082Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©
2009 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungtelecom.com/support
GH68-22561A
Printed in Korea.
R600.02_CC26_WB_050709_F9
Cover.fm Page 3 Thursday, May 7, 2009 4:43 PM
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
VoiceSignal® and the VoiceSignal logo are registered Trademarks of VoiceSignal Technologies, Inc.
Openwave® is a registered Trademark of Openwave, Inc.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
r600.book Page 1 Thursday, May 7, 2009 4:35 PM
Table of Contents
Section 1: Getting Started ..............................................4
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Replacing the Front Folder Cover . . . . . . . . . . . . . . . . . . . . . . . 9
Section 2: Understanding Your Phone .........................10
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Open View (Front) of Your Phone . . . . . . . . . . . . . . . . . . . . . . . 11
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 14
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Section 3: Menu Navigation ......................................... 19
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Navigate Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Section 4: Call Functions ............................................. 21
Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . . 21
Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 22
Making a Call — Quick Search Dialing . . . . . . . . . . . . . . . . . . 23
Making a Call — Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 23
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Ignoring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Section 5: Understanding Your Contacts .................... 33
Your Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 33
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Editing an Existing Contact Entry . . . . . . . . . . . . . . . . . . . . . . 39
Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Renaming a Contacts Group . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Sending a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Section 6: Entering Text ............................................... 45
Text Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 45
Entering Text in Alpha (Abc) Mode . . . . . . . . . . . . . . . . . . . . . 46
Entering Text in T9 Word Mode . . . . . . . . . . . . . . . . . . . . . . . 46
Entering Upper and Lower Case Letters . . . . . . . . . . . . . . . . . 47
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Section 7: Messaging ................................................... 49
Creating and Sending New Messages . . . . . . . . . . . . . . . . . . 49
Message Send Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
r600.book Page 2 Thursday, May 7, 2009 4:35 PM
Receiving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
56
56
57
61
61
Section 8: Browser ....................................................... 63
Browser Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Launching the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How Browser Keys Work . . . . . . . . . . . . . . . . . . . . . . . . . . . .
63
63
63
64
64
Section 9: Brew ............................................................ 65
Launching Brew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications Shopping and Downloading (Brew) . . . . . . . . . . .
Changing Your Brew Settings . . . . . . . . . . . . . . . . . . . . . . . . .
Using On-line Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
65
65
66
Section 10: Camera-Camcorder .................................. 68
Taking Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Taking Snap Shots (Single Pictures) . . . . . . . . . . . . . . . . . . . .
Screen Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Photo Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
68
70
72
73
77
80
80
80
Point, Click, and Send Pictures and Videos . . . . . . . . . . . . . . 81
Section 11: Multimedia ................................................ 83
Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
83
85
86
88
89
Section 12: Tools .......................................................... 92
Accessing Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . 92
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Section 13: Voice Service .......................................... 106
Voice Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Section 14: Changing Your Settings .......................... 111
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111
111
111
114
2
r600.book Page 3 Thursday, May 7, 2009 4:35 PM
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Accessing Your Phone’s Information . . . . . . . . . . . . . . . . . . . 129
Section 15: Health and Safety Information ............... 131
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 131
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 132
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 133
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Using Your Phone Near Other Electronic Devices . . . . . . . . . 142
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless
Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Other Medical Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 144
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 146
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 147
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 148
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
3
Section 16: Warranty Information ............................. 151
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 151
End User License Agreement for Software . . . . . . . . . . . . . . 154
Index ............................................................................ 159
r600.book Page 4 Thursday, May 7, 2009 4:35 PM
Section 1: Getting Started
This section explains how to start using your Samsung R600
phone by activating your service, setting up your Voicemail, or
getting an understanding of how this manual is put together.
Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
quick reference to most features begins on page 72.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 131.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
highlight Use the Navigation key (
) to move a
highlighting effect onto a menu item or screen item of
interest.
select
After “highlighting” a menu item or screen item,
press the MENU-OK key (
) to launch, access, or
save a highlighted menu item or screen field of
interest.
➔
Used in place of “select” in long “drill down”
procedure steps.
Notes and Tips
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
• Notes — Explain alternative options within the current feature, menu,
or sub-menu.
• Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
• Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Example: “...Settings ➔ Call Settings ➔ Call Answer...”
Getting Started
4
r600.book Page 5 Thursday, May 7, 2009 4:35 PM
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life.
Important!: Use of other accessories may invalidate your warranty and may
cause damage.
Correct
Use the Travel Adapter
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
1.
Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
5
2.
Incorrect
Insert the smaller end of the Travel Adapter into the
charger/accessory connector at the bottom end of your
phone.
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
• Five bars (
) indicate a full charge.
• An empty battery icon (
) indicates a near empty battery.
• A blinking empty battery icon (
) and a tone sounding indicate
you have two to three minutes before the battery is too low to operate
the phone.
r600.book Page 6 Thursday, May 7, 2009 4:35 PM
Important!: If you continue to use your phone without charging its battery,
the phone will shut down.
Activating Your Phone
2.
phone until it slips into place.
3.
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Place the battery cover
over the battery (1) and
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Install the Battery
Press lightly on the top end of the battery down into the
slide the battery cover up
into place (2).
Remove the Battery
1.
Press and hold
2.
Press down on the
to turn off the phone (if on).
battery cover (1), slide the
cover toward the bottom
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. From fully
discharged to fully charged, the battery requires up to 4 hours of
charge time.
1.
end of the phone, then lift
the cover (2) away from
the phone.
Insert the bottom end of
the battery first,
3.
Lift the battery up (1) and
matching the gold
away (2) from the phone,
contacts on the inside of
top end first.
the battery to those on
the phone.
Getting Started
6
r600.book Page 7 Thursday, May 7, 2009 4:35 PM
Turn Your Phone On
1.
Turn Your Phone Off
Open the flip on your phone, as
䊳
shown.
2.
Press
.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
The phone begins searching for
a network signal.
4.
Press
Once the phone finds a signal,
the time, date, and day appear
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1.
in the second line of the display.
5.
You’re now ready to place and receive calls.
In standby mode, press and hold
or dial your own
mobile number to dial Voicemail.
2.
Follow the prompts in the new user tutorial to setup your
mail box.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
7
for two or more seconds. Your phone
powers off.
Note: As with any other radio-transmitting
device, do not touch the antenna
(behind the hinge) while using your
phone as this can affect call quality and
can cause the phone to operate at a
higher power level than is necessary.
3.
Press and hold
r600.book Page 8 Thursday, May 7, 2009 4:35 PM
Listen to Voicemail
1.
In standby mode, press and hold
3.
Make sure that the gold contacts of the card are face up,
as shown, then carefully slide the memory card into the
or dial your own
memory card slot until you feel it click into place.
mobile number to dial Voicemail. (For more information,
refer to “Making a Call — Number Entry Dialing” on
page 21.) After connecting, you will hear your voice
greeting.
2.
You are prompted to enter your password.
Memory Card (Optional)
Your phone has a memory card slot in the battery cavity, above
the battery. You can install a microSDTM card to provide
additional memory for storing files (such as, sound files and
photos) in your phone.
Install a Memory Card
1.
Place or hold your phone with the rear of the phone facing
up.
2.
Incorrect
4.
Replace the microSD cover.
Remove a Memory Card
1.
Open the microSD cover on the right hand side of the
phone, as shown.
Correct
Place or hold your phone with the rear of the phone
facing up.
2.
Open the microSD cover on the right hand side of
the phone.
3.
Carefully press the memory card inward until you feel
it release.
Getting Started
8
r600.book Page 9 Thursday, May 7, 2009 4:35 PM
4.
Slowly release your pressure on the card. It will slide
outward a short distance.
Install Front Folder Cover
1.
Place the front folder cover in position on top of the phone
5.
Remove the memory card from the memory card slot.
on the SLIDING line as shown below in 1. Make sure that
6.
If desired, install another memory card. (For more
your hands are holding the bottom of the folder cover as
information, refer to “Install a Memory Card” on page 8.)
shown.
7.
Replace the microSD cover.
Replacing the Front Folder Cover
Your phone has a front folder cover that can be removed. You can
install different colored front folder covers.
2
Remove Front Folder Cover
1.
Hold your phone with your thumbs toward the bottom of
the phone.
2.
Gently press down while pushing away.
3.
The front folder cover will come off of the phone.
2.
Gently slide the front folder cover upwards along the
SLIDING line, then press down on the top left and right
sides as shown in 2.
3.
9
The front folder cover will lock into place.
r600.book Page 10 Thursday, May 7, 2009 4:35 PM
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Closed View of Your Phone
Features of Your Phone
• Domestic and international voice and text messaging service (available
on participating networks).
• High speed data (CDMA 2000 1x, EVDO Technology)
• Bluetooth® Stereo Wireless Technology (see Note)
• Global Positioning (GPS) Technology
• Personal Information Management (PIM) Functions
• Picture (MMS) Messaging
• Text (SMS) Messaging
• E-mail Messaging
• Voice Dial
• Changeable faceplates
• MP3 with external key controls
• Optional removable microSD™ Memory Card slot
Note: The R600™ phone supports the wireless handsfree profile for
Bluetooth® v2.0 wireless technology. The R600 does not support
Bluetooth OBEX profiles.
Features
1.
Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
Understanding Your Phone
10
r600.book Page 11 Thursday, May 7, 2009 4:35 PM
2.
Power / Accessory Connector — Used to connect charging
Open View (Front) of Your Phone
accessories or any available accessory cables to your
phone.
3.
Camera Lens — The lens of your built-in CameraCamcorder.
4.
Front Display — Indicates the status of your phone,
including status icons, message indicators, signal
strength, and so on.
5.
Media Player Keys — With the phone closed, controls
6.
Headset Connector — Used to connect an optional wired
music file playback.
headset or TTY device to your phone.
7.
Media Player Keys — Launches the Camera-Camcorder
feature of your phone and takes pictures or records videos,
with the phone open or closed.
8.
Memory Card Slot — Used to plug in an optional
microSD™ memory card for additional multimedia file
storage.
Features
1.
Main Display — Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators and contents, signal
strength, and so on.
11
r600.book Page 12 Thursday, May 7, 2009 4:35 PM
2.
3.
Navigation Key — In Menu mode, lets you scroll through
are in text entry mode. Press this key to return to the
preset functions and one user-defined function.
previous menu or screen when navigating features on your
Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
4.
5.
6.
Speakerphone Key — Used to enable and disable
call, press to send the call to voicemail.
Talk Key — Lets you place or receive a call. In standby
14. Right Soft Key — Used to navigate through menus and
mode, press the key once to access the recent call log.
applications and to select the choice indicated at the
Voicemail Key — Lets you speed dial your Voicemail
bottom right corner of the Main Display.
Special Function Keys — Enter special characters. Perform
Microphone — Lets the other caller hear you clearly when
you are speaking to them.
9.
the power goes On or Off. When you receive an incoming
13. Music Key — Used to launch the Media Player.
various functions.
8.
phone.
12. END Key — Ends a call. If you press and hold the END key,
Speakerphone mode.
account to review your voice messages.
7.
11. BACK Key — Deletes characters from the display when you
the phone menu options. In Standby mode, lets you access
Voice Recognition Key — Used to launch VoiceSignal voice
recognition system.
10. Alpha-numeric Keys — Use these keys to enter numbers,
15. MENU-OK Key — Pressing when navigating through a
menu accepts the highlighted choice in a menu.
16. Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, Left (
) and
Right (
).
letters, and characters.
Understanding Your Phone
12
r600.book Page 13 Thursday, May 7, 2009 4:35 PM
Left Soft Key
Some functions of the Left soft key (
) are as follows:
• In standby mode, press the Settings soft key (
) to launch the
Settings menu.
• When the Left soft key function is Edit, press the Edit soft key (
)
to edit a Contacts entry.
Right Soft Key
Some functions of the Right soft key (
) are as follows:
• In standby mode, press the Contacts soft key (
) to launch the
Contact menu.
• When the Right soft key function is Options, press the Options soft key
(
) and a pop-up menu appears.
• When the Right soft key function is Back, press the Back soft key
(
) to back up one menu level.
MENU-OK Key
• In standby mode, press the MENU-OK key (
) to launch the Main
Menu.
• In a menu, press
to accept the highlighted selection.
• In camera mode, press
to take a photo or to create a Picture
message.
• When the MENU-OK key function is Edit, press Edit (
) to edit a
Draft message.
13
Talk Key
The Talk key (
) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in standby mode to display a list of recent calls to
and from your phone.
• Press
twice in standby mode to call the most recent number.
• Press
to pick up a waiting call. Press
again to switch back
to the other call.
BACK Key
The BACK key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
• If you enter an incorrect character, briefly press
to backspace
(and delete) the character.
• To erase the entire sentence, press and hold
.
• To back up one menu level, briefly press
.
END Key
• Press and hold the END key (
) to turn your phone on or off.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel the
last input.
r600.book Page 14 Thursday, May 7, 2009 4:35 PM
Navigation Key
Use the directional keys on the Navigation key (
) to
browse menus, sub-menus, and lists. Each directional key also
acts as a shortcut to launch applications.
Understanding the Display Screen
1.
indicate network status,
battery power, signal
Use the Volume key (
) on the left side of the phone to
adjust ringer volume (in standby mode), to adjust voice call
volume (during a call), and to browse menu items.
strength, connection type,
Use the Media Player keys (
) on the outside of the
phone to pause/resume music file playback and to change to
playing the previous or next music file in a playlist.
2
and more.
2.
The center portion of the
display shows information
Use the Camera-Camcorder key on the right side of the phone to
launch the Media Player (by pressing and releasing the key) or to
Media Player Keys
1
display contains icons that
Volume Key
Camera-Camcorder Key
The top line of your phone’s
3
such as call progress
information, messages, and photos.
3.
The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
soft key will display the Settings menu, pressing the MENUOK key (
) will display the Main Menu, and pressing the
Right soft key will show the Contacts menu.
Display Screen Icons
Your R600 phone can show you definitions of the icons that
appear on the top line of the display.
To access the Icon Glossary:
Understanding Your Phone
14
r600.book Page 15 Thursday, May 7, 2009 4:35 PM
䊳
In standby mode, press Menu (
), then select Settings ➔
Phone Info ➔ Icon Glossary. A list appears showing the icons
that can appear on the top line of the displays.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
• Choice
– Example: “Save Message?”
• Reconfirm
– Example: “Erase All Messages?”
• Performing
– Example: “Sending...” “Connecting...”
• Completed
– Example: “Message Saved”
• Information
– Example: “New Message”
• Error
– Example: “System Error!”
• Warning
– Example: “Low Battery,” “Memory Full!”
15
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note: During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight setting.
(For more information, refer to “Backlight” on page 114.)
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except
or
, by pressing only the
key, or by opening the
phone’s flip. (For more information, refer to “Call Answer” on
page 116.)
r600.book Page 16 Thursday, May 7, 2009 4:35 PM
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key,
then choose the input mode from the pop-up menu using the
Navigation key. Optional input modes are T9 Word, Abc, ABC,
Symbols, and 123. (For more information, refer to “Text Entry
Modes” on page 45.)
• After you power the phone on.
• When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Place Calls in Standby Mode
1.
In standby mode, enter a phone number, and press
to place a call.
Tip: You can cycle between T9 Word, Abc, and 123 by repeatedly pressing
and holding the
key until the phone beeps.
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key.
(For more information, refer to “Change Lock Code” on
page 120.)
Note: The default lock code is the last four digits of your telephone number.
Standby Mode
2.
Press
to return to standby mode.
Receive Messages in Standby Mode
While your phone is in standby mode, new incoming messages
automatically appear in the screen as they are received. Use the
Navigation key to scroll through text or to view complete images.
Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
to “The In-Use Options” on page 19.)
Enter/Exit Silent Mode
Silences the ringers, the alerts, and the tones your keypad makes
when you press a key.
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
Understanding Your Phone
16
r600.book Page 17 Thursday, May 7, 2009 4:35 PM
To enter Silent Mode:
䊳
1.
In standby mode, repeatedly press the Volume key (
Down until “Ringer Off” appears in the display, then press SET
(
Options are:
).
To exit Silent Mode:
䊳
While in Silent mode and standby mode, repeatedly press the
Volume key (
In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
)
) Up until “Ringer Off” disappears from the
• Vibrate
• Medium/High
• Low
• High
• Low/Medium
• Vibrate/High
• Medium
• Ringer Off
display and the desired ringer value appears, then press SET
(
2.
).
When you are satisfied with the setting, press SET (
).
Your phone returns to standby mode.
Note: To quickly access Silent Mode, press and hold the (
)
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The No Ring icon ( ) appears in the display when the
phone is in Ringer Off mode.
Vibrate Mode
䊳
In standby mode, repeatedly press the Volume key (
)
down until “Vibrate” appears in the display, then press SET
(
).
Note: The Volume key is on the left side of phone.
Adjust the Ringer
To adjust the Ringer volume, while in standby mode, press the
Volume key up or down.
17
Music Player Mode
The Music Player in your phone can play music files (MP3, CMX,
Midi, AAC, AAC+, and eAAC+), but only if they are stored in the
My Sounds folder on an optional microSD Memory Card.
Note: For more information, refer to “Memory Card (Optional)” on page 8.
• Entering Music Player Mode:
r600.book Page 18 Thursday, May 7, 2009 4:35 PM
– In standby mode, press the Music key (
) — on the keypad.
– or –
– In standby mode, press Menu (
), then select Multimedia ➔
Music Player.
– or –
– With the flip closed, press and hold the Play/Pause key (
).
Note: For more information, refer to “Music Player” on page 86.
Camera Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
For more information, refer to “Camera-Camcorder” on page 68.
• Entering Camera Mode:
– In standby mode, press and hold the Camera key (
) — on the
right side of the phone.
• Exiting Camera Mode — Press the
key.
– In standby mode, press and hold the Camera key (
) — on the
right side of the phone. Press the Options soft key to access the
camera or camcorder options. Highlight the camcorder option and
.
press
• Exiting Camcorder Mode — Press the
The Video Player in your phone can play video files but only if
they are stored in the My Videos folder in the phone or on an
optional microSD Memory Card. Supported video formats are
MPEG4, H.263, and H.264 (Decoding: QCIF Only).
Note: For more information, refer to “Memory Card (Optional)” on page 8.
• Entering Video Player Mode:
1.
For more information, refer to “Camera-Camcorder” on page 68.
• Entering Camcorder Mode:
In standby mode, press Menu (
), then select
Multimedia ➔ My Videos.
– or –
In camcorder mode, press the Gallery soft key.
Camcorder Mode
Camcorder mode lets you record videos with your phone’s
camera. In Camcorder mode, you can also adjust the resolution
and appearance of your videos.
key.
Video Player Mode
A 2-by-2 array of thumbnail images appears in the display.
2.
Highlight the desired video and press the Play soft key. The
Video Player screen appears in the display and begins
playing the highlighted video.
Understanding Your Phone
18
r600.book Page 19 Thursday, May 7, 2009 4:35 PM
Section 3: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of the menus available with your phone.
Create Txt Msg
Menu Navigation
Access menus using the MENU-OK key (
), the Navigation
key (
), the soft keys (
), or a shortcut.
1.
In standby mode, press Menu (
). The Main Menu
appears in the display.
2.
Use the Navigation key (
3.
Press
Calendar
) to browse phone menus.
Access numerous menus and features even while in a call.
to access a menu or sub-menu highlighted in
Return to the Previous Menu
or the Back soft key to return to the previous menu.
Navigation Key Shortcuts
In standby mode, press a navigation key (as illustrated below) to
launch its corresponding application.
19
Inbox
The In-Use Options
the display.
Press
All Calls
Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually
returns to standby mode.
1.
While in a call, press the Options soft key. The following
menu items appear in the display:
• Contacts — The Contacts Find screen appears in the display.
• Call History — View, respond to, and manage your recent
outgoing, incoming, and missed calls.
• Message — The Messages menu appears in the display. (For
more information, refer to “Messaging” on page 49.)
r600.book Page 20 Thursday, May 7, 2009 4:35 PM
• Connect Bluetooth — Connects a Bluetooth device, such as a
headset, in place of the phone’s earpiece and microphone.
Do one of the following:
• Use the Navigation key to highlight a menu or feature. Press the
key to open the highlighted menu or to activate the
highlighted feature.
• Press the
key to exit the menu.
Example: Pressing Menu ➔ 9 ➔ 5 ➔ 2 takes you to your phone’s
Language setting.
Using Quick Search
You can also access menus, sub-menus, and menu items by
name.
Note: For information on activation, see “Quick Search” on page 123.
Tip: You can block sound going to the other party(ies) on this call by pressing
Mute / Unmute. This can reduce noise on conference calls.
1.
Navigate Using Shortcuts
sub-menu, or menu item.
2.
Using Menu Item Number Shortcuts
In standby mode, press Menu (
Press the Down navigation key. The Menu List screen
appears in the display listing the menu(s), sub-menu(s),
You can also access menus and sub-menus using menu item
numbers. This method is often called a “shortcut.” To shortcut to
), then enter the menu
a menu or sub menu, press Menu (
and/or sub menu number(s) for the feature in question.
1.
In standby mode and using the alpha-numeric keys, enter
the first few characters of the name to the desired menu,
You can launch Speakerphone mode to conduct this call hands-free by
pressing Options Speakerphone.
and menu item(s) with matching names.
3.
Use the Up/Down navigation keys to highlight the desired
name, then press OK (
) to access your selection.
). The main menu
appears in the display.
2.
Press the number of the menu, sub menu, and so on to
arrive at the desired feature.
Menu Navigation
20
r600.book Page 21 Thursday, May 7, 2009 4:35 PM
Section 4: Call Functions
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.
Making a Call — Number Entry Dialing
1.
With the phone on, enter the number you wish to call using
the keypad.
2.
Press
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
to place the call.
Dialing Emergency Numbers
When you call an Emergency Number, such as 911, your phone
locks itself in emergency mode, only allowing you to make calls
to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.
1.
With the phone on, enter 911 using the keypad.
2.
Press
to place the call.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
21
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Note: You can specify other numbers than 911 as emergency numbers using
the Emergency # settings. (For more information, refer to “Emergency
#” on page 120.)
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• P Pause — A hard pause stops the calling sequence until you press
.
• T Pause — A four-second pause stops the calling sequence for four
seconds and then automatically sends the remaining digits.
r600.book Page 22 Thursday, May 7, 2009 4:35 PM
To manually call a number with pause(s) without storing it to your
Contacts:
1.
Enter the number you wish to call.
2.
Press the Options soft key.
A pop-up menu containing the following options appears in
the display:
• P Pause — a hard pause (awaits input from you).
• T Pause — a four-second pause.
Tip: You can create pauses longer than four seconds by entering multiple
T Pauses.
3.
Use the navigation keys to highlight the desired pause
(speed dial) numbers for your contacts. (For more information,
refer to “Assigning Speed Dial Numbers” on page 40.)
One-Touch Dialing
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
Example: For Speed Dial number 003, press and hold
until the name
and number appear in the display and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 099 are special Two-Touch
dialing locations.
option.
4.
Press
to enter the highlighted pause into your
number sequence.
5.
Press
to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location
Example: For Speed Dial number 013, briefly press
, then press and
hold
until the name and number appear in the display and the
number is dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example: For Speed Dial number 113, briefly press
, briefly press
again, then press and hold
until the name and number appear
in the display and the number is dialed.
Call Functions
22
r600.book Page 23 Thursday, May 7, 2009 4:35 PM
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains four-second (T) pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains hard (P) pauses, wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and press
to continue
your dialing sequence.
Note: For more information about dialing pauses, refer to “Manual Pause
Calling” on page 21.
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any number stored in your
Contacts list by pressing the number keys that correspond to the
first few letters of a Contact name.
3.
Highlight the desired Contact name, then press
to
call the number.
Making a Call — Voice Dialing
Your mobile phone includes state-of-the-art voice recognition
software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone
Note: For information on activation, see “Quick Search” on page 123.
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1.
In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
2.
Press the Up navigation key. The Contact list Find screen
appears showing the desired Contact name.
23
on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1.
In standby mode, press and hold
.
“Say a Command” appears in the display and is
pronounced through the earpiece.
r600.book Page 24 Thursday, May 7, 2009 4:35 PM
2.
Say, “Call”. You are prompted to “Say the name or #”.
3.
Speak clearly and say the name of a person in your
5.
• “Home”
• “Work”
• “Mobile”
Voice Dial dials the specified number.
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
4.
Dialing a Number
To dial a number using Voice Dial, do the following:
1.
.
pronounced through the speaker.
name, or use the keypad to select the correct name from
2.
Say “Call”. VoiceSignal prompts you to “Say the name or
#”.
page 107.)
• Press the Repeat soft key to say the name again.
• Press
to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it
In standby mode, press and hold
“Say a Command” appears in the display and is
Say “Yes” to confirm the name or “No” to hear the next
the list. (For more information, refer to “Choice Lists” on
Say one of the following number types:
3.
Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
(that is, Home, Work, Mobile, and so on), Voice Dial
number. If Voice Dial is not sure it has recognized the
displays the possible choices and prompts you with
number, it displays a choice list of up to three numbers and
“Which number?”
prompts you with “Did you say?” followed by the first
number on the list.
Call Functions
24
r600.book Page 25 Thursday, May 7, 2009 4:35 PM
4.
Say “Yes” to confirm the number or “No” to hear the next
• If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
one, or use the keypad to select the correct number from
the list.
• Your phone continues to notify you of the call until one of the following
(For more information, refer to “Choice Lists” on
• You answer the call.
page 107.)
• You ignore the call.
• Press the Repeat soft key to say the name again.
• Press
to exit Voice Dial without dialing.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains (hard waits) P Pauses(s), wait
for the appropriate prompt(s) from the number you are calling (credit
card number, bank account number, and so on) and enter the
appropriate response(s).
• If you voice dial a contact that contains (four-second) T Pause(s) simply
wait for the pauses to pass and the dialing to complete.
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides
eight ring volume settings including: Ringer Off, Vibrate, Low,
Low/Medium, Medium, Medium/High, High, and Vibration/High.)
• A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
25
events occurs:
• The calling party ends the call.
• The call is sent to voicemail.
Answering an Incoming Call
䊳
Press the
key. The ring tone and/or vibration stop and the
caller’s voice can be heard in the earpiece.
Tip: You can set your phone to answer calls automatically or when you press
any key but
. (For more information, refer to “Call Settings” on
page 116.)
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
䊳
During an incoming call, press the Ignore soft key. The caller is
forwarded to your voice mail.
r600.book Page 26 Thursday, May 7, 2009 4:35 PM
Adjusting the Call Volume
In standby mode, repeatedly press the volume key (
)
down until the Call Volume Level desired appears in the display.
The volume key is on the left side of phone.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Note: In cases where a Calls log entry concerns a call to or from a Contacts
entry, the Contact name associated with the number appears in the
Calls log list instead of the number.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
Review the Calls Log
1.
In standby mode, press Menu, then select Calls. The
following Calls log options appear in the display:
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Data Calls
• Call Timer
• Data Counter
2. Select the Calls log that you wish to review or the function
you wish to access.
Note: In standby mode, you can quickly view your most recent calls of all
types by briefly pressing
. A list containing up to 270 of your most
recent outgoing, incoming, and missed calls appears in the display.
1.
In standby mode, press Menu, then select Calls ➔
Outgoing Calls. A list of your outgoing calls appears in the
display.
2.
Select a call to view further information about it.
3.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Save — Save the number to your Contacts. The following Save
options are available:
– Create New — Save as a new contact.
– Update Existing — Update an existing contact.
Call Functions
26
r600.book Page 27 Thursday, May 7, 2009 4:35 PM
• Details — View details of the call. This option only displays if the
call is from a saved number.
• Erase — Erase the selected call from your Outgoing call log.
• Lock/Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Outgoing call log.
• View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press the Msg soft key. The following options appear in
27
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
1.
In standby mode, press Menu, then select Calls ➔
Incoming Calls. A list of your Incoming calls appears in
the display.
the display:
2.
Select a call to view further information about it.
• Text Message — Lets you send a text message to the selected
number called.
• Picture Message — Lets you send a picture message to the
selected number called.
• Video Message — Lets you send a video message to the
selected number called.
3.
Press the Options soft key. A pop-up menu containing the
Note: For more information, refer to “Creating and Sending New Messages”
on page 49.
5.
Incoming Calls
Select an option to perform its function.
following options appears in the display:
• Save — Save the number to your Contacts. The following Save
options are available:
– Create New — Save as a new contact.
– Update Existing — Update an existing contact.
• Details — View details of the call. This option only displays if the
call is from a saved number.
• Erase — Erase the selected call from your Incoming calls log.
• Lock/Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Incoming calls log.
r600.book Page 28 Thursday, May 7, 2009 4:35 PM
• View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, Lifetime Calls.
4. Press the Msg soft key. The following options appear in
the display:
• Text Message — Lets you send a text message to the selected
calling number.
• Picture Message — Lets you send a picture message to the
selected calling number.
• Video Message — Lets you send a video message to the
selected number called.
Note: For more information, refer to “Creating and Sending New Messages”
on page 49.
5.
Select an option to perform its function.
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
1.
In standby mode, press Menu, then select Calls ➔
2.
Select a call to view further information about it.
3.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Save — Save the number to your Contacts. The following Save
options are available:
– Create New — Save as a new contact.
– Update Existing — Update an existing contact.
• Details — View details of the call. This option only displays if the
call is from a saved number.
• Erase — Erase the selected call from your Missed call log.
• Lock/Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Missed call log.
• View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press the Msg soft key. The following options appear in
the display:
• Text Message — Lets you send a text message to the selected
called number.
• Picture Message — Lets you send a picture message to the
selected called number.
Missed Calls. A list of your missed calls appears in the
display.
Call Functions
28
r600.book Page 29 Thursday, May 7, 2009 4:35 PM
• Video Message — Lets you send a video message to the
selected number called.
Note: For more information, refer to “Creating and Sending New Messages”
on page 49.
5.
Select an option to perform its function.
• Lock/Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Calls log.
• View Timer — Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Outgoing Calls, Incoming Calls,
Roaming Calls, Lifetime Calls.
4. Press the Msg soft key. The following options appear in
All Calls
the display:
• Text Message — Lets you send a text message to the selected
calling/called number.
• Picture Message — Lets you send a picture message to the
selected calling/called number.
• Video Message — Lets you send a video message to the
selected number called.
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1.
In standby mode, press Menu, then select Calls ➔
All Calls. A list of all logged calls appears in the display.
2.
Select a call to view further information about it.
3.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Save — Save the number to your Contacts. The following Save
options are available:
– Create New — Save as a new contact.
– Update Existing — Update an existing contact.
• Details — View details of the call. This option only displays if the
call is from a saved number.
• Erase — Erase the selected call from your Calls log.
29
Note: For more information, refer to “Creating and Sending New Messages”
on page 49.
5.
Select an option to perform its function.
r600.book Page 30 Thursday, May 7, 2009 4:35 PM
Data Call
Your phone retains information about the last 90 data calls and
stores them in the Data call log. You can review the Data call log
for the time, date, and duration of a data call, as well as other
information.
1.
In standby mode, press Menu, then select Calls ➔
Data Calls. A list of your data calls appears in the display.
2.
Select a call to view further information about it.
3.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Erase — Erase the selected data call from your Data Call log.
• Lock / Unlock — Protect the selected data call from being
erased.
• Erase All — Erase all calls from your Outgoing call log.
• Data Counter — Shows the total data Transmitted during the call,
Received during the call, Total data transmitted and received during
the call, the date and time the Data Counters were last reset, and
the Lifetime Data Counter.
4. Select an option to perform its function.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note: Call Timer is not for billing purposes.
1.
In standby mode, press Menu, then select Calls ➔
Call Timer.
The following options appear in the display:
• Last Call — View the duration of your last call.
• Outgoing Calls — View the duration of the total outgoing calls
made on your phone since the last erasure.
• Incoming Calls — View the duration of the total incoming calls
received on your phone since the last erasure.
• Roaming Calls — View the total calls duration on your phone
while roaming since the last erasure.
• All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Calls — View the duration of all calls since your phone
was activated.
2. Press the Reset soft key to reset a selected counter except
Last Reset and Lifetime Calls.
Call Functions
30
r600.book Page 31 Thursday, May 7, 2009 4:35 PM
3.
Press the Reset All soft key to reset all counters except
Lifetime Calls.
4.
Press
or
if you wish to exit the list.
Note: Although Total call timers can be erased, the Lifetime call timer can
never be erased.
• Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
2. Press the Reset soft key to reset a selected counter except
Last Reset and Lifetime Data Counter.
3.
Lifetime Data Counter.
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note: Data Counter is not for billing purposes.
1.
In standby mode, press Menu ➔ Calls ➔
Data Counter. The following options appear in the display:
• Transmitted — View the total amount of data transmitted by your
phone since the last reset.
• Received — View the total amount of data received by your phone
since the last reset.
• Total — View the total amount of data sent or received by your
phone since the last reset.
• Last Reset — View the time and date all timers were last reset.
31
Press the Reset All soft key to reset all counters except
4.
Press
or
if you wish to exit the list.
Note: Although Total data counters can be erased, the Lifetime Data Counter
can never be erased.
Roaming
What is Roaming?
Roaming lets you use your phone when you travel outside of your
Wireless Carrier’s coverage area. The Roaming icon ( )
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Carrier for more information about
Roaming.
r600.book Page 32 Thursday, May 7, 2009 4:35 PM
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
• Home only — Your phone is available for normal operation only in the
designated coverage area.
• Automatic — Your Wireless Carrier’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital “A” system is acquired.
Note: For more information, refer to “System Select” on page 122.
Call Functions
32
r600.book Page 33 Thursday, May 7, 2009 4:35 PM
Section 5: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
Your Contacts List
Your Contacts list can store up to 500 entries, with each contact
having up to five associated phone numbers, two e-mail
addresses, and a picture ID.
Each phone number can be up to 48 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.
Tip: One-Touch, Two-Touch, and Three-Touch Dialing allow you to call
numbers stored in your Contacts list faster. (See page 22.)
• Add New Contact — Add a number or e-mail to your Contacts.
• Speed Dial — Assign speed dial numbers to your Contacts.
• Group — Rename one of your five Contacts groups.
• Memory Info — View available memory for dial entries.
2. Select the Contacts sub-menu or option of your choice.
Tip: You can also access a sub-menu or menu option by pressing the number
key corresponds to the menu item number. For example, press
for
Add New Contact.
Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list or add
information to an existing entry.
Using the Contacts Add Option
1.
Open Your Contacts List
1.
In standby mode, press Menu (
) and select Contacts ➔
Add New Contact. The New Contact screen appears in the
display with the Name field highlighted.
) and select Contacts.
The following Contacts sub-menus and options appear in
33
In standby mode, press Menu (
2.
Enter a name or phrase to associate with the type using
the display:
the keypad. (For more information, refer to “Entering Text”
• Find — Find a phone number by entering a Contact name.
on page 45.)
r600.book Page 34 Thursday, May 7, 2009 4:35 PM
3.
Use the Up and Down navigation keys to highlight each
field.
4.
Enter a phone number (Mobile, Home, or Work) or an e-mail
address (E-mail) for the new Contacts entry.
5.
If desired, assign the new Contact to a Group. This lets you
send messages to and find this Contact and other related
Saving a Number from a Call
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1.
contacts. (For more information, refer to “Group” on
7.
available) appear in the display.
If desired, enter an additional phone number (Fax) or
2.
Press the Save soft key. The Save screen appears in the
e-mail address (Email 2) for the new Contacts entry.
display showing the following options:
If desired, select an identifying image by highlighting the
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
photo ID field and pressing the Set soft key. The My Images
screen appears in the display. (For more information, refer
to “My Images” on page 83.) Select an image and press
OK (
8.
to end your call, the call time, length
of call, phone number, and name of the other party (if
page 38.)
6.
After you press
).
Press SAVE (
Tip: You can also store a phone number from standby mode by entering the
number, and pressing the Save soft key.
) to save the new Contacts entry.
Understanding Your Contacts
34
r600.book Page 35 Thursday, May 7, 2009 4:35 PM
Creating a new Contacts entry:
3.
7.
Select Create New. The following (number type) icons
type) icons appear in the Update Existing screen:
appear in the display:
4.
Mobile
Pager
Home
Work
entry, see “Using the Contacts Add Option” on page 33.)
Adding the number to an existing Contacts entry:
Use the navigation keys to highlight Update Existing, then
. The Update Existing screen appears in the
display showing your current Contacts list.
Enter the first few characters of the Contacts entry name
under which you will store the saved number. (For more
information on finding a Contacts entry, see “Using the
35
Work
9.
Make any added changes you wish to the Contacts entry.
Contact screen appears in the display.
(For more information, refer to “Editing an Existing Contact
field. (For more information on creating a new Contacts
Contacts Add Option” on page 33.)
Home
Fax
Select the appropriate unassigned number type. The Edit
number being save populating the selected number type
6.
Pager
8.
Select the number type that matches your new entry. The
press
Mobile
Fax
New Contact screen appears in the display with the
5.
Select the desired Contacts entry. The following (number
Entry” on page 39.)
10. Press SAVE (
) to save the entry.
Storing Number from a Calls Log
You can store numbers from the Calls logs to your Contacts.
1.
In standby mode, press Menu (
2.
Select from the following Calls logs:
• Outgoing Calls
• Incoming Calls
• Missed Calls
), then select Calls.
r600.book Page 36 Thursday, May 7, 2009 4:35 PM
• All Calls
A list of your calls appears in the display.
3.
Highlight the number you wish to store in Contacts.
4.
Press the Options soft key. The following options appear in
the display:
• Save — Saves the selected number to your Contacts list.
• Details — View details of the call. This option only displays if the
call is from a saved number.
• Erase — Deletes the selected number from the selected Calls log.
• Lock / Unlock — Prevents/allows deletion of the selected number.
• Erase All — Deletes all numbers from the selected Calls log.
• View Timer — Shows the call times for the Last Call, All Calls,
Incoming Calls, Outgoing Calls, Roaming Calls, Last Reset, and
Lifetime Calls timers for the selected Calls log.
5. Select Save. The following options appear in the display:
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
For more information on saving the number, see “Saving a
Number from a Call” on page 34.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1.
In standby mode, press and hold
for Voice Service.
“Say a Command” appears in the display and is
pronounced through the speaker.
2.
Say “Lookup”.
VoiceSignal prompts you to “Say the name or #.”
3.
Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Understanding Your Contacts
36
r600.book Page 37 Thursday, May 7, 2009 4:35 PM
4.
Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by pressing
for “A”.
the list. (For more information, refer to “Choice Lists” on
page 107.)
• To say the name again, press the Repeat soft key.
• To exit VoiceSignal without dialing, press
.
5. The contact information for the name you selected appears
in the display.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
1.
In standby mode, do one of the following:
• Press the Down navigation key (Contacts Find shortcut).
• Press Menu (
) and select Contacts ➔ Find.
The FIND screen appears in the display with an
alphabetical list of Contacts showing.
2.
Enter the first few characters of the name of the contact as
it appears in your Contacts list.
37
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
3.
When the desired Contacts entry is listed in the display,
highlight the contact using the navigation keys (if
necessary). Then, do one of the following
• To dial the number associated with the named Contact, press
.
• To change the information about the contact, press the Edit soft
key.
• To show information about the contact, press VIEW (
).
• To access other options, press the Options soft key. The following
options appear in the display:
– New Contact — Lets you add a new number to your Contacts list or to
the selected contact.
– Erase — Lets you delete the highlighted contact.
– Send Message — Lets you send a text or picture message to the
selected contact.
– Call — Lets you place a call to the highlighted contact.
– Send Name Card With Bluetooth — Lets you send a Name Card
containing the selected Contact’s information to another Bluetooth
device.
r600.book Page 38 Thursday, May 7, 2009 4:35 PM
– Set as/Remove Speed Dial — Lets you assign a speed dial number
to a contact. You can select the number by either entering it in the Go To
to set the number.
box or by using the Navigation key, then press
1.
Contacts list entry you wish to find (such as the area code
or area code and exchange — for example, 888-987).
Group
This option lets you find a Contacts list entry with a specific
Group name.
1.
In standby mode, press Menu (
) and select Contacts ➔
Group. The Group List screen appears in the display.
2.
Select the group you wish to browse. The selected Group
list appears in the display.
3.
In standby mode, enter the first few numbers of the
Highlight the desired Contacts entry, then do one of the
following:
• To delete the selected contact from the Group, press the Remove
soft key. (Does not apply to the General group.)
• To ADD an existing contact entry to the selected Group, press
. (Does not apply to the General group.)
• To send a text or picture message to selected Contact(s) in the
current Group, Press the Options soft key.
4. Select the desired option to enter that option’s sub-menu.
Search by Number
2.
Press the Options soft key. The following menu options
appear in the display:
• Search — Lets you find Contacts list entries by their phone
numbers.
• P pause — Adds a hard pause (awaits input from you).
• T pause — Adds a four-second pause.
• Send Message — Lets you send a text or picture message to the
entered number.
3. Select the Search option. The FIND screen appears in the
display listing all phone numbers in your Contacts list that
contain the entered digits.
4.
Highlight the desired Contacts entry. Then do one of the
following:
• To dial the highlighted number, press
.
• To display information about the Contacts entry associated with the
highlighted number, press OK (
). From the View Contact
screen, you can erase or edit the selected Contacts entry.
This option lets you find a Contacts list entry by one of its phone
numbers.
Understanding Your Contacts
38
r600.book Page 39 Thursday, May 7, 2009 4:35 PM
Editing an Existing Contact Entry
Adding Pauses to Contacts Numbers
Once stored in the Contacts, an entry can be changed quite
easily.
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2.
Press the Edit soft key. The Edit Contact screen appears in
3.
Highlight a number stored in this contact entry.
4.
To backspace and delete numbers, press
5.
To clear all numbers in the highlighted field, press and hold
the display with the contact name highlighted.
.
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• P pause — A hard pause stops the calling sequence until further input
from you.
• T pause — A four-second pause stops the calling sequence for two
seconds and then automatically sends the remaining digits.
Tip: You can enter multiple four-second pauses to extend the length of a
pause. For example, two consecutive four-second pauses cause a total
pause time of eight seconds.
.
Note: You can also add numbers (such as a Fax number) to the entry, assign
it to a Group, and add other information.
6.
When you’re finished editing the entry, press
. Your
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
Store Pauses in a New Contacts Entry
1.
changes are saved and a confirmation message appears in
the display.
In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
2.
Press the Options soft key.
The following menu options appear in the display:
39
r600.book Page 40 Thursday, May 7, 2009 4:35 PM
• Search — Lets you find Contacts list entries by their phone
numbers.
• P pause — Adds a hard pause (awaits input from you).
• T pause — Adds a four-second pause.
• Send Message — Lets you send a text or picture message to the
entered number.
3. Select the pause option of your choice to enter the
highlighted pause into your number sequence.
4.
When you’re finished entering the number and pauses,
5.
• Set Speed Dial / Remove speed dial — lets you assign or remove
a Speed Dial number for this Contacts entry.
• Set as default — your phone automatically dials this number when
you find this Contacts entry and press the
key.
• T pause — a four-second pause.
• P pause — a hard pause (awaits input from you).
6. Select the pause option of your choice to enter the
highlighted pause into your number sequence.
press the Save soft key to store the number in your
Contacts.
7.
Add Pauses to an Existing Contacts Entry
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
Press the Options soft key. The following menu options
appear in the display:
When you’re finished entering pauses, press
to save
your changes to the number in your Contacts list.
Assigning Speed Dial Numbers
When you add or edit an entry to the Contacts list, you have the
option of assigning a Speed Dial number using the Options popup menu or of returning to the Contacts menu and using the
Speed Dial option. You can also change a contact’s Speed Dial
number.
2.
Press the Edit soft key. The Edit Contact screen appears in
3.
Highlight a number stored in this contact entry.
4.
Use the Left and Right navigation keys to place the cursor
(For more information, refer to “Finding a Contacts Entry”
where you want to add a pause (usually at the right-hand
on page 36.)
the display with the contact name highlighted.
1.
Find and highlight the desired entry in the Contacts list.
end of the number).
Understanding Your Contacts
40
r600.book Page 41 Thursday, May 7, 2009 4:35 PM
2.
Do one of the following:
6.
number.
Using the Options soft key:
3.
Press the Options soft key. The following menu options
appear in the display:
• New Contact — Lets you add a new number to your Contacts list
or to the selected contact.
• Erase — Lets you delete the highlighted contact.
• Send Message — Lets you send a text or picture message to the
selected contact.
• Call — Lets you place a call to the highlighted contact.
• Send Name Card With Bluetooth — Lets you send a Name Card
containing the selected Contact’s information to another Bluetooth
device.
• Set as Speed Dial — Lets you assign a speed dial number to a
contact. You can select the number by either entering it into the Go
to set the
To box or using the navigation keys, then press
number.
4. Select Set as Speed Dial. The Speed Dial menu appears in
the display.
5.
Select an unassigned Speed Dial number to assign it to the
Press the Yes soft key to assign the selected Speed Dial
Using the Edit soft key:
7.
Press the Edit soft key. The Edit Contact screen appears in
the display with the Contact name highlighted.
8.
Highlight a number stored in this Contact entry.
Note: If a Contact has more than one stored number (such as Home and
Office), you can select which of these numbers your phone will dial
when you speed dial that Contact.
9.
Press the Options soft key. The following menu options
appear in the display:
• Set Speed Dial / Remove speed dial — lets you assign or remove
a Speed Dial number for this Contacts entry.
• Set as default — your phone automatically dials this number when
you Find this Contacts entry and press
.
• P pause — a hard pause (awaits input from you).
• T pause — a four-second pause.
10. Select Set as/Remove Speed Dial. The Speed Dials screen
selected Contact. You are prompted to confirm the
appears in the display. (If a speed dial number has been
assignment.
set previously, you can remove it by pressing
has been set, continue with the next step.)
41
. If none
r600.book Page 42 Thursday, May 7, 2009 4:35 PM
11. Select an unassigned Speed Dial number to assign it to the
selected Contact. You are prompted to confirm the
Edit an Existing Email Address
1.
assignment.
information, refer to “Finding a Contacts Entry” on
page 36.)
12. Press the Yes soft key to assign the selected Speed Dial
number. The Edit Contact screen appears in the display.
13. Press
2.
3.
Add a Number or Email Address to an Existing Entry
1.
Find the desired entry in the Contacts list. (For more
symbol).
4.
Use the keypad to edit the e-mail address. (For more
information, refer to “Entering Text” on page 45.)
page 36.)
• To insert the @ symbol, do the following:
– Press the Left soft key. A pop-up menu appears in the display with Abc
highlighted.
– Highlight Shortcuts, then press
.
– Highlight the @ symbol, and press
.
– Enter the remainder of the Email address using the keypad. (For more
information, refer to “Entering Text” on page 45.)
• To add the domain type to the end of the Email address, do the
following:
– Press the Left soft key. A pop-up menu appears in the display with Abc
highlighted.
– Highlight Shortcuts, then press
.
Press the Edit soft key. The Edit Contact screen appears in
3.
Highlight a number field or the Email field in this Contacts
the display with the contact name highlighted.
entry.
Enter the phone number or e-mail address for the new
Contacts entry.
5.
Highlight the E-mail or Email 2 field (labeled with the @
information, refer to “Finding a Contacts Entry” on
2.
4.
Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
to save the new Speed Dial number
assignment.
Find the desired entry in the Contacts list. (For more
Press
to add the number or Email address to the
existing entry.
Understanding Your Contacts
42
r600.book Page 43 Thursday, May 7, 2009 4:35 PM
– Select the desired domain type (such as, .com, .net, or .edu) to add to
the Email address.
5.
Press
to save your changes.
) and select Contacts ➔
Speed Dial. The Speed Dial list appears in the display.
Tip: You can also assign a Speed Dial number when creating or editing a
Contacts entry. For more information, refer to “Assigning Speed Dial
Numbers” on page 40.
2.
Highlight a Speed Dial number.
3.
Press SET (
appears in the display:
• General
• Family
• Friends
• Colleagues
• Business
2. Highlight the Group (other than General) that you wish to
Rename.
). The Set Speed Dial screen appears in the
3.
Enter or highlight a Contact entry, then press
. You are
To save the new setting, press the Yes soft key. To discard
cursor at the end of the name.
4.
Enter a new Group name using the keypad. (For more
information, refer to “Entering Text” on page 45.)
the new setting, press the No soft key.
5.
43
The Rename Group screen appears in the display. The
current name of the selected Group shows with a flashing
prompted to confirm the new Speed Dial setting.
5.
) and select Contacts ➔
rename, then press the Options soft key and select
display.
4.
In standby mode, press Menu (
Group. A list of Group names (like the following list)
You can assign and change Speed Dial numbers for Contacts
entries.
In standby mode, press Menu (
Use this option to rename a Group in your Contacts list.
1.
Speed Dial Numbers
1.
Renaming a Contacts Group
Press
to save the changed group name.
r600.book Page 44 Thursday, May 7, 2009 4:35 PM
Deleting a Contacts Entry
1.
3.
press MARK (
(For more information, refer to “Finding a Contacts Entry”
this step for all other Contacts entries you wish to send.
on page 36.)
2.
3.
4.
When you have marked all the entries you wish to send,
press the Done soft key. The Choose device screen
prompts you to confirm the erasure.
appears in the display.
5.
To erase the selected Contact entry, press the Yes soft key.
Use the Send Name Card With Bluetooth option to send one or
more selected Contacts entries to another, compatible phone or
other device over a Bluetooth connection.
Find and highlight the desired entry in the Contacts list.
(For more information, refer to “Finding a Contacts Entry”
on page 36.)
Press the Options soft key, then select Send Name Card
With Bluetooth. The Send Via Bluetooth screen appears in
the display with the highlighted Contacts entry marked.
Use the Up and Down navigation keys to highlight the
name of the receiving device, then press
Sending a Contacts Entry
2.
) to mark the entry for sending. Repeat
Press the Options soft key and select Erase. The phone
To keep the selected Contact entry, press the No soft key.
1.
Highlight another Contacts entry you wish to send and
Find and highlight the desired entry in the Contacts list.
. Your phone
automatically connects with the other device and sends
the selected Contact entries.
Note: For information on turning off the Bluetooth connection, see
“Bluetooth” on page 92.
Memory Info
Use the Memory sub-menu to view the amount of Contacts
entries you have stored, as well as the remaining memory.
䊳
In standby mode, press Menu (
) and select Contacts ➔
Memory Info. The amounts of memory used and remaining for
Contacts entries appear in the display.
Understanding Your Contacts
44
r600.book Page 45 Thursday, May 7, 2009 4:35 PM
Section 6: Entering Text
This section outlines how to select the desired text input mode
when entering characters into your phone. This section also
describes how to use the T9 predictive text entry system to
reduce the amount of key strokes associated with entering text.
Text Entry Modes
You can compose text messages using alphabetical characters,
symbols, and numbers. Each method of character entry (symbol,
number, and so on) is called a text entry mode. There are four
text entry modes, as indicated:
• Alpha—Alphabetical text entry mode. Options are:
– ABC — All upper case
– Abc — Initial capital
– abc — All lower case
• Symbols — Symbol entry mode. Enter symbols into your message by
pressing the corresponding number that appears above it in the
display.
• 123 — Number entry. Enter numbers by pressing the corresponding
key on the keypad.
• T9 Word — Predictive text mode. Press each key only once to enter
the letter of the word that you’re spelling.
45
Your current mode of text entry [Abc, 123, or T9 Word] is indicated
in the lower left part of the display when composing a text
message.
Changing the Text Entry Mode
1.
While composing a text message, press the Left soft key.
The following options pop-up in the display:
• T9 Word
• Abc
• ABC
• 123
• Symbols
• Add T9 Word
Abc is highlighted. Select any of the other four text entry
modes. Uses of the text entry modes are explained in
greater detail in “Messaging” on page 49.
r600.book Page 46 Thursday, May 7, 2009 4:35 PM
Entering Text in Alpha (Abc) Mode
1.
2.
1.
a desired letter, in sequence, one time. A list of words and/
key with the desired characters (such as, pressing
or abbreviations pops-up at the bottom of the text entry
once for “G”).
screen.
Press the key repeatedly until the desired character
appears in the display (such as, pressing
two times
for “H”).
3.
4.
While in T9 Word mode, press each key that corresponds to
Enter characters while in Alpha (Abc) mode by pressing the
Pause briefly and the displayed character is accepted and
Example: If you press the key sequence
, the word “Bad” is
likely to appear in the text entry field. In the pop-up list, “Bad”,
“Ace”, and “Caf” appear.
2.
When you have completed pressing all the keys for the
inserted into your message.
desired word, review the word appearing in the text entry
Press
field and pop-up list.
to enter a space.
Entering Text in T9 Word Mode
T9 Word recognizes commonly used words for a sequence of
keypresses and inserts the word into your message. Using T9
mode is much faster than the more traditional method Alpha
mode, since T9 requires only one key press per letter of the word
that you are spelling.
Note: See “Changing the Text Entry Mode” on page 45 for instructions on
changing text entry modes.
3.
If the word in the text entry field is not the one you meant
to enter, use the Up and Down navigation keys to highlight
the desired word in the pop-up list.
Example: When you press the key sequence
, the word “And”
appears on the screen. Suppose the word you want is “cod”. Just
press the Up and Down navigation keys until “Cod” is highlighted
in the display.
4.
Press
to accept the highlighted word.
Entering Text
46
r600.book Page 47 Thursday, May 7, 2009 4:35 PM
For practice, enter the word “SAMSUNG” into your
3.
Enter the word you want to add to the T9 Word dictionary.
message by pressing each of the following keys only once:
Note: In Add T9 Word mode, you enter a word using the same multiple
keypress method as when in Abc text entry mode.
S
A
M
S
U
N
G
T9 Word recognizes that the most commonly used word for
the sequence of keys you just pressed is “Samsung.”
Tip: To enter words not likely to be in the T9 Word dictionary, such as
uncommon abbreviations or slang, try changing the text entry mode
from T9 Word to Abc, abc, or ABC.
2.
.
Change the text entry mode to Add T9 Word.
Note: See “Changing the Text Entry Mode” on page 45 for instructions on
changing the text entry mode to Add T9 Word.
47
. The word is added to the T9 dictionary.
Entering Upper and Lower Case Letters
In Abc and T9 Word modes, you can select to enter only upper
case letters (ABC/T9 WORD), only lower case letters (abc/T9
word), or a mix of the two (Abc/T9 Word).
1.
While in T9 Word or Abc mode, repeatedly press the
The left soft key label changes to indicate the current
If pressing the keys corresponding to a word you want to enter
and then scrolling through the pop-up list does not display that
word, do the following:
Clear the word by pressing and holding
Press
key to change the capitalization setting.
Adding Words to the T9 Word Dictionary
1.
4.
capitalization setting.
For example, if the left soft key label is ABC, and you want
to enter the word “BALL”, press the
key until the left
soft key label changes to abc, then enter the word “ball”.
Tip: To enter a capital letter within a word, such as “SimTam”, change the
capitalization setting to Abc at the beginning of the word and before
entering the “T”. The capitalization setting will automatically change to
abc after you enter each upper case letter.
r600.book Page 48 Thursday, May 7, 2009 4:35 PM
Entering Numbers
3.
Enter numbers into a text message while in number mode (123).
Repeat steps 1 and 2 to insert as many symbols into your
message as desired.
Note: See “Changing the Text Entry Mode” on page 45 for instructions on
changing text entry modes.
䊳
While in 123 mode, press the key labeled with the number that
you wish to insert into your message. For example, press
to enter the number ‘4’ in your message.
Entering Symbols
Symbol mode enables you to enter symbols such as @ or % in a
text message.
Note: See “Changing the Text Entry Mode” on page 45 for instructions on
changing text entry modes.
1.
While in Symbols mode, use the Prev soft key and the Next
soft key to page through the symbols, if necessary.
2.
Press the key that corresponds to the symbol that you wish
to enter. For example, press
for an exclamation point
(!).
Note: You can also use the navigation keys to highlight the desired symbol
and then press
to enter the selected symbol into your message.
Entering Text
48
r600.book Page 49 Thursday, May 7, 2009 4:35 PM
Section 7: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text, picture, and postcards.
Creating and Sending a Text Message
1.
In standby mode, press the Menu ➔ Messages ➔ Create
Message ➔ Text Message. The Create Text Msg screen
appears in the display showing the To list.
2.
Address your message by selecting contacts and/or
Select Contacts. The Add Contacts screen appears in the
display. For more information, refer to “Finding a Contacts
Entry” on page 36.
Highlight a Contact. Use the Left and Right navigation keys to
highlight a phone Number or E-mail address for the highlighted
) to mark your selection.
Contact. Press MARK (
To add the selected contacts to the To list, press the Done soft key.
The Create Text Msg screen appears in the display showing the
populated To list.
• To enter recipient e-mail address(es), press and hold the
key
to change the text entry mode from 123 to T9 word or abc. (For
more information, refer to “Add a Number or Email Address
to an Existing Entry” on page 42.)
3. When you are finished addressing your message, press
. The Text field appears in the display.
entering number(s) or e-mail address(es) of message
recipient(s):
• To select a mobile number or e-mail address using your Contacts
list, press the Add soft key. The following options appear in the
display:
– Contacts
– Groups
– Recent Calls
49
4.
Enter the text for your message using the keypad. (For
more information, refer to “Entering Text” on page 45.)
5.
At any point while composing a message, you can set
message send options by pressing the Options soft key.
(For more information, refer to “Message Send Options”
on page 55.)
r600.book Page 50 Thursday, May 7, 2009 4:35 PM
6.
Once you’re finished composing your message, press
SEND (
7.
In standby mode, press Menu ➔ Messages ➔ Create
Message ➔ Picture Message. The Create PIC Msg screen
Camera Mode” on page 51.)
Tip: You can also access Messages by pressing Menu (
Messages.
8.
) and select
Address your message by selecting contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s). (For more information, refer to “Creating and
Sending a Text Message” on page 49. See Step 2.)
3.
After addressing your picture message, the Subject field
becomes highlighted.
4.
5.
To set message send options, press the Options soft key.
(For more information, refer to “Send Picture Messages in
appears in the display showing the To list.
2.
Enter the message text using the keypad. (For more
information, refer to “Entering Text” on page 45.)
Creating and Sending a Picture Message
1.
6.
) to send your message.
To add a picture to the message, highlight the Picture field.
• Press the Images soft key to access the picture gallery. If there are
no pictures in the gallery, press the Camera soft key to launch the
camera, then take a picture. With pictures in the gallery, thumbnail
images appear in the display. Then, do the following:
– Highlight a picture in the gallery.
– To expand the highlighted picture to fill the display, Press the View soft
key.
– To activate the phone’s camera and take a new picture, Press the
Camera soft key. (For more information, refer to “CameraCamcorder” on page 68.)
9. Once you have highlighted a photo, press
. The Create
If desired, enter the Subject text using the keypad. (For
Pic Msg screen appears in the display with the selected
more information, refer to “Entering Text” on page 45.)
photo in the Picture field.
Press the Down navigation key. The Text field becomes
The Sound field becomes highlighted.
highlighted.
Messaging
50
r600.book Page 51 Thursday, May 7, 2009 4:35 PM
10. To add a sound file to your message, press the Sounds soft
12. Once you’re finished composing your picture message, do
key. The Record New option and a list of sound files appear
one of the following:
in the display with the Record New option highlighted.
• Press SEND (
) to send the message.
• Press the Options soft key. For more information, refer to “Send
Picture Messages in Camera Mode” on page 51.
11. Record a new sound file or select a listed sound file.
• If you select the Record New option, the Record New screen
appears in the display. Press REC (
) to begin recording.
• Wait for the beep, then start speaking. As it is recording the phone
displays a countdown timer that shows the seconds remaining for
the recording.
– To pause the recording, press the Pause soft key. When a memo is
paused, press the Resume soft key to continue recording.
– To stop recording, press SAVE (
). The Record New option and a
list of sound files appear in the display with the Record New option
highlighted.
• Select your new sound file. The Create Pic Msg screen reappears
in the display with your selected sound file in the Sound field.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Picture
message composer.
1.
In standby mode, press and hold the Camera key (
2.
Ensure the Auto Save camera setting is set to Off.
3.
Using the display as a viewfinder, when the image that you
wish to send appears in the display, press TAKE (
).
) to
take a picture.
Note: For more information about using the camera feature in your phone,
see “Camera-Camcorder” on page 68.
51
r600.book Page 52 Thursday, May 7, 2009 4:35 PM
4.
Press Send (
) to save the picture and begin delivery
process. The Create Pic Msg screen appears in the display
with the To: list showing.
5.
Enter the phone number or E-mail address of the recipient
of the Picture message, then press
.
• Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
– Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the To: list.
6.
7.
The Subject: field appears in the display. Enter a subject for
– Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Select the desired option to insert a sound into your message.
10. Press the Options soft key to complete the message text
the Picture message using the keypad. (For more
and set message send options. The following options
information, refer to “Entering Text” on page 45.)
appear in the display:
Press the Down navigation key until the Text: field is
•
•
•
•
•
highlighted, then enter the message text using the keypad.
(For more information, refer to “Entering Text” on
page 45.)
8.
Your new picture appears in the Picture: field.
9.
If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 10.
Preview — View the picture as the recipient will see it.
Add Quick Text— Add pre-composed text to your message.
Save As Draft — Save the message to your Draft folder.
Priority Level — Choose High, Normal, or Low.
Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
• Deferred Delivery — Select the Date and Time to deliver the
message.
• Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
Messaging
52
r600.book Page 53 Thursday, May 7, 2009 4:35 PM
• Add To Contacts — Save the recipient’s number or e-mail address
as a Contacts list entry.
11. Highlight an option, then press
to invoke it.
12. Press
5.
highlighted.
6.
to send the message. “Connecting...” followed
by “Sending Message” appear in the display and a
progress bar indicates the send status.
7.
Camcorder Mode” on page 54.)
Create Message ➔ Video Message. The Create Video Msg
screen appears in the display showing the To list.
2.
) and select
Address your message by Adding selected contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s). (For more information, refer to “Creating and
Sending a Text Message” on page 49. See Step 2.)
3.
After addressing your video message, the Subject field
becomes highlighted.
4.
If desired, enter the Subject text using the keypad. (For
more information, refer to “Entering Text” on page 45.)
53
To set message send options, press the Options soft key.
(For more information, refer to “Send Video Messages in
In standby mode, press the Menu ➔ Message, Select
Tip: You can also access Messages by pressing Menu (
Messages.
Enter the message text using the keypad. (For more
information, refer to “Entering Text” on page 45.)
Creating and Sending a Video Message
1.
Press the Down navigation key. The Text field becomes
8.
To add a video clip to the message, highlight the Video
field.
• Press the Videos soft key to access the video gallery. If there are no
videos in the gallery, press the Video soft key to launch the
camcorder, then record a video. With videos in the gallery,
thumbnail images appear in the display. Then, do the following:
– Highlight a video in the gallery.
– To expand and play the highlighted video to fill the display, press the
Play soft key.
– To activate the phone’s camcorder and record a new video, press the
Video soft key. (For more information, refer to “CameraCamcorder” on page 68.)
9. Once you have highlighted a video, press
. The Create
Video Msg screen appears in the display with the selected
video clip in the Video field.
r600.book Page 54 Thursday, May 7, 2009 4:35 PM
10. Once you’re finished composing your video message, do
4.
Using the display as a viewfinder, when the image that you
one of the following:
wish to send appears in the display, press Record (
• Press SEND (
) to send the message.
• Press the Options soft key. For more information, refer to “Send
Video Messages in Camcorder Mode” on page 54.
record a video. The time counter at the bottom of the
Send Video Messages in Camcorder Mode
Camcorder viewfinder screen indicates recording time in
seconds.
5.
Video messages can be sent to recipients with compatible
phones or devices.
To end your video clip, press Stop (
).
Note: For more information about using the camcorder feature in your phone,
see “Camera-Camcorder” on page 68.
Tip: You can send a Video message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Video
message composer.
6.
1.
In standby mode, press and hold the Camera key (
7.
2.
Press the Options soft key and use the Navigation key to
To send your new video clip as part of a video message,
press Send (
).
select camcorder.
3.
) to
).
The Create Video Msg screen appears in the display with
the To: list showing.
8.
Add a Contact or recent caller, or enter the phone number
Ensure the camcorder’s Recording Mode option is set to
or E-mail address of the recipient of the Picture message,
Limit for MMS.
then press
Note: For more information about setting camcorder options in your phone,
see “Camcorder Options” on page 77.
.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the To: list.
Messaging
54
r600.book Page 55 Thursday, May 7, 2009 4:35 PM
9.
The Subject: field appears in the display. Enter a subject for
the Video message using the keypad. (For more
information, refer to “Entering Text” on page 45.)
10. Press the Down navigation key until the Text: field is
highlighted, then enter the message text using the keypad.
• Remove Video — Remove the video clip from your message.
• Add To Contacts — Save the recipient’s number or e-mail address
as a Contacts list entry.
13. Highlight an option, then press
to invoke it.
14. Press
(For more information, refer to “Entering Text” on
page 45.)
11. Your new video clip appears in the Video field.
12. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
•
•
•
•
•
Preview — View the video message as the recipient will see it.
progress bar indicates the send status.
Message Send Options
You can set priority, validity, and other options before you send a
message. Which options appear in the Send Options list depends
on what type of message you have composed and what message
field you have highlighted.
1.
After you’ve composed a Text or Picture message, press
Add Quick Text — Add pre-composed text to your message.
the Options soft key. The following are Send Options that
Save As Draft — Save the message to your Draft folder.
can appear in the display:
Priority Level — Choose High, Normal, or Low.
• Edit Send To — Lets you add, delete, or change numbers or Email addresses in a Text message To: list.
• Add Quick Text — Lets you add Quick Text to a Picture message.
• Save As Draft — Saves this message in the Drafts folder.
• Priority Level — Lets you assign a High, Normal, or Low (picture
messages only) priority to the message.
Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
• Deferred Delivery — Select the Date and Time to deliver the
message.
• Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
55
to send the message. “Connecting...” followed
by “Sending Message” appear in the display and a
r600.book Page 56 Thursday, May 7, 2009 4:35 PM
• Validity Period — Lets you set a Date and Time when this
message will no longer be available to the recipient. After the set
period of time, your message is recalled.
• Enh. Delivery Ack / Delivery Ack — Set to On to be alerted when
your message is received by the addressee.
• Add To Contacts — Lets you add the addressee numbers or
E-mail addresses to your Contacts list.
2. Select a desired option and a value for that option. You’re
returned to the Create Msg screen.
Receiving New Messages
When you receive a message in standby mode, one of the
following occurs:
• If Auto View and Auto Scroll are both set to On — An alert sounds
(unless turned off) and the message text automatically appears in the
display and scrolls slowly to the end of the message. (For more
information, refer to “Text Message Settings” on page 62.)
• If Auto View is set to Off — An alert sounds (unless turned off) and a
New Message notification appears in the display along with the
closed envelope icon (
). The date and time of the message and
the following options also appear in the display:
– View Now — Opens the message where you have the option to Reply,
Forward, Reply With Copy, Save Quick Text, Go To URL, Lock, Add To
Contacts, Callback, or Message Info.
– View Later — Closes the popup and saves the message to your inbox
where you can view it later.
䊳
Select the desired option.
Receive Messages While in a Call
When you receive a message while in a call, one of the following
occurs:
• If Auto View and Auto Scroll are both set to On — The message text
automatically appears in the display and scrolls slowly to the end of
the message. (For more information, refer to “Text Message
Settings” on page 62.)
• A New Message notification appears in the display along with the
closed envelope icon (
). The date and time of the message and
the following options also appear in the display:
– View Now — Opens the message where you have the option to Reply,
Forward, Reply With Copy, Save Quick Text, Go To URL, Lock, Add To
Contacts, Callback, or Message Info.
– View Later — Closes the popup and saves the message to your inbox
where you can view it later.
Select the desired option.
Voicemail
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
Messaging
56
r600.book Page 57 Thursday, May 7, 2009 4:35 PM
messages any time you are in your Carrier’s network coverage
area.
Voice Mail Setup
Checking your Voicemail
In standby mode, press and hold
until you’re
connected to your Wireless Carrier’s voicemail system. A
recorded message prompts you for a password.
2.
Enter your password, then follow the recorded prompts, to
listen to your voice message(s), change administrative
options, and so on.
Tip: You can also access your voice mail by selecting an entry in the
Voicemail folder.
Message Folders
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
57
In standby mode, press the Menu ➔ Messages then
select Inbox, to open the Inbox folder.
2.
Before callers can leave voice mail messages, you must first set
up your account. For more information, refer to “Setting Up Your
Voicemail” on page 7. and to “General Message Settings” on
page 61.
1.
1.
Highlight a message, then do one of the following:
• To delete the message, press the Erase soft key.
• To view the highlighted message, press OPEN (
) then
proceed to Step 3.
• To access other options, press the Options soft key. The following
options appear in the display:
– Reply — Lets you compose and send a message to the sender.
– Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
– Forward — Lets you forward the message to other E-mail addresses
or mobile phone numbers.
– Lock / Unlock — Blocks or allows erasure of the selected message.
– Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
– Erase Multiple — Deletes selected/all unlocked messages from the
Inbox folder.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
• To return to the Messages menu, press
.
3. While viewing a selected message, do one of the following:
• To delete the message, press the Erase soft key.
r600.book Page 58 Thursday, May 7, 2009 4:35 PM
• To compose and send a message to the sender of the highlighted
).
message, press REPLY (
• Press the Options soft key, The following options appear in the
display:
– Go To URL — Lets you browse any Internet address included in the
message.
– Play Again — Picture Messages only — Replay a sound file included
with a message.
– Forward — Lets you forward the message to other E-mail addresses
or mobile phone numbers.
– Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
– Save Pic — Picture Messages only — Saves a copy of the image
included in the selected message to the images Gallery.
– Save Sound — Picture Messages only — Saves the sound file in the
message to the My Sounds gallery.
– Save Quick Text — Saves the message text as a Quick Text entry.
– Lock / Unlock — Block or allow changes to the selected message.
– Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
– Callback — Lets you call the originator of the message.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
• To return to the Inbox list, press
.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
more information, refer to “Lock Phone” on page 119.)
Outbox
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
Tip: Verify whether and when a message or e-mail was successfully received
by enabling the Delivery Ack message send option. (For more
information, refer to “Send Picture Messages in Camera Mode” on
page 51.)
1.
In standby mode, press the Menu ➔ Messages then
select Outbox. A list of your outgoing messages appears in
the display.
2.
Highlight a message, then do one of the following:
• To delete the message, press the Erase soft key.
• To view the highlighted message, press OPEN (
) then
proceed to Step 3.
• Press the Options soft key. The following options appear in the
display:
Messaging
58
r600.book Page 59 Thursday, May 7, 2009 4:35 PM
– Forward — Send the message to another addressee.
– Resend — Re-send the message.
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
– Erase Multiple — Erase all messages in the Outbox folder.
– Message Info — Lets you display status information about picture
messages.
Select an option to perform the function for that option.
• To return to the Messages menu, press
.
3. While viewing a selected message, do one of the following:
• To delete the message, press the Erase soft key.
• To resend a message to the original addressee, press RESEND
(
).
• Press the Options soft key. The following options appear in the
display:
– Go To URL — Go to a URL included in this message.
– Forward — Send the message to another addressee.
– Erase — Picture Messages only — Delete the message from the
Outbox folder.
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Save Quick Text — Save the message text in the Quick Text folder.
59
– Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
– Callback — Lets you call the recipient of the message.
– Message Info — Lets you display status information about picture
messages.
• Select an option to perform the function for that option.
• To return to the Outbox list, press
.
Drafts Folder
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
1.
In standby mode, press the Menu ➔ Messages then
select Drafts. A list of your draft messages appears in the
display.
2.
Use the navigation keys to highlight the message that you
wish to edit, then do one of the following:
• To delete the message, press the Erase soft key.
• To view the highlighted message, press EDIT (
) then proceed
to one of the following screens:
– Text Message — Create Text Msg screen showing the To field
appears in the display.
– Picture Message — Create Pic Msg screen showing the To list
appears in the display. Change or add numbers and addresses, then
r600.book Page 60 Thursday, May 7, 2009 4:35 PM
press
.
Proceed to Step 3.
– Video Mesasge— Create Video Msg screen showing the To list
appears in the display. Change or add numbers and addresses, then
press
.
Proceed to Step 3.
• Press the Options soft key. The following options appear in the
display:
– Send — Send the message to the current addressee(s).
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
– Save Quick Text — Save the message text in the Quick Text folder.
– Erase Multiple — Erase all messages in the Drafts folder.
Select an option to perform the function for that option.
• To return to the Messages menu, press
.
3. If you press EDIT (
) in the Text screen/field, do one of
the following:
• To change text options, press the Left soft key. (For more
information, refer to “Entering Text” on page 45.)
• To send the message, press SEND (
).
• Press the Options soft key. (For more information, refer to
“Message Send Options” on page 55.)
4.
Once you’re finished composing your message, do one of
the following:
• To send the message, press SEND (
).
• To exit the message, press
. You are prompted to save your
changed message to the Drafts folder.
Voicemail
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
1.
In standby mode, press the Menu ➔ Messages then
select Voicemail. A Voicemail status screen indicating the
number of new messages in your voice mailbox, their
urgency, and any callback numbers appears in the display.
2.
Press
to call your voice mailbox and listen to your
voice messages.
Note: You can, in standby mode, also press and hold
mailbox.
to dial your voice
Messaging
60
r600.book Page 61 Thursday, May 7, 2009 4:35 PM
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
Message Settings
The Msg Settings options let you define numerous message
settings such as ringer types and save options.
1.
Note: This function erases all messages in a selected message folder or in all
message folders. To delete a single message, from the Messages
menu, open the message folder where the message to be deleted is
stored, then select and delete the message from the Option menu
while viewing the message content.
1.
In standby mode, press the Menu ➔ Messages then
select Erase Messages. The following options appear in the
display:
•
•
•
•
Inbox — Lets you delete all messages from your Inbox.
Outbox — Lets you delete all messages from your Outbox.
Drafts — Lets you delete all draft messages from the Drafts folder.
All Messages — Lets you delete all messages from all message
folders.
2. Select the folder containing the messages that you wish to
delete. You are prompted to confirm the erasure of all
messages in that folder.
3.
To cancel deleting any messages, press the No soft key. To
delete all messages from the selected folder, press the Yes
soft key.
61
In standby mode, press the Menu ➔ Messages then
select Msg Settings. The following options appear in the
display:
• General — Lets you set default option values for Text, Picture, and
Voice messages.
• Text Message — Lets you set default message text option values
for both Text and Pic messages.
• Picture/Video Message — Lets you set default picture message
option values.
2. Select the desired option to perform the function(s) for that
option.
General Message Settings
1.
In standby mode, press the Menu ➔ Messages then
select Msg Settings ➔ General. The following options
appear in the display:
• Auto Save — Lets you set whether to automatically save to the
Outbox folder, to discard, or to prompt you to save unsent
messages when you exit them.
r600.book Page 62 Thursday, May 7, 2009 4:35 PM
• Auto Erase — Automatically erase the oldest read message after
memory is full.
• Quick Text — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
• Voicemail # — Lets you update your Voicemail access number.
• Entry Mode — Lets you set the default text entry mode [T9 Word,
Abc/ABC (alphabetically), or 123 (numerical)] for composing
message text.
• Callback # — Lets you disable, enable, and update the callback
number that can be inserted in outgoing messages.
• Signature — Lets you disable, enable, and update the text
signature that can be inserted in outgoing messages.
• Reminder — Lets you set the message receipt reminder to play
Once, Every 2 Minutes, Every 15 Minutes, or not to play (Off).
2. Select the desired sub-menu to enter the sub-menu and
change the selected message settings.
• Auto Scroll — When set to On, the phone automatically scrolls
message text, letting you see the complete message text without
using the navigation keys.
2. Select the desired sub-menu to enter the sub-menu and
change the selected message settings.
Picture/Video Message Settings
1.
In standby mode, press the Menu ➔ Messages then
select Msg Settings ➔ Picture/Video Message. The
following option appears in the display:
• Auto Receive — Lets you choose whether to be prompted to
retrieve picture messages from your provider’s e-mail server or to
automatically retrieve all picture messages as they are received by
the server.
2. Select Auto Receive to enter the sub-menu and change the
selected message setting.
Text Message Settings
1.
In standby mode, press the Menu ➔ Messages then
select Msg Settings ➔ Text Message. The following
options appear in the display:
• Auto View — Automatically view messages as they are received.
Messaging
62
r600.book Page 63 Thursday, May 7, 2009 4:35 PM
Section 8: Browser
This section outlines how to launch the Browser, how to navigate
to other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
Browser Indicator
With the Browser, you can conveniently surf the web and
download ringtones and wallpapers using your phone. Each time
you launch the Browser, your phone connects to the Internet and
the service indicator icon (
) appears in the display.
Stored Web Content
The Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Launching the Browser
1.
In standby mode, select MENU > Browser > Browser.
A list of categories (each representing one or more web
sites) appears in the display.
63
2.
Use the Navigation keys to browse the categories.
3.
Once the desired category is highlighted, press to enter the
category list.
Exit the Web
䊳
To exit the Browser, press
.
Using Browser
When you use the Browser, some of the keys operate differently
than during a normal phone call. The Browser presents onscreen
items in any of the following ways:
• Text or numeric input.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by using the soft keys.
r600.book Page 64 Thursday, May 7, 2009 4:35 PM
Browser soft keys
At the bottom of the Browser screen is a bar that contains
browser commands. The Left and Right soft keys are used to
execute the browser commands that appear in their respective
corners of the display. them in the display. These are called “soft
keys” because their function changes depending on the
application.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key () to select a link when it is highlighted.
How Browser Keys Work
The following table lists Browser keys and their functions.
Navigation key — Use to browse lists and
options.
Shift Key — Press before entering text to
enable.
Number 1 thru 0 — Use the number keys to
select items in a menu if they are numbered.
Pound/Space Key — Press to insert a space
when entering text.
Number 1 thru 9 — Use the number keys to
select items in a menu if they are numbered.
End Key — Press to exit the Browser and
return the phone to standby mode.
Left Soft Key — Press to activate the
command that appears above it in the display.
Right Soft Key — Press to activate the
command that appears above it in the display.
BACK Key — A browse, back-up key. Press
once to back up one page. Press and hold
to go back to home page. Press to clear the
last number, letter, or symbol entered.
Press and hold to completely clear the text
display.
Browser
64
r600.book Page 65 Thursday, May 7, 2009 4:35 PM
Section 9: Brew
With Mobile Shop, you can download full featured applications
over the air including games, personalized ring tones, pictures,
and more. You can send and receive instant messages and
e-mail, or browse the web to catch up on all the latest news.
1.
This section outlines how to obtain games and other applications
for your phone. For more information, contact your Wireless
Carrier.
2.
Launching Brew
1.
In standby mode, press MENU > Brew > Brew.
The Brew menu displays on the screen as shown.
Applications Shopping and Downloading (Brew)
Download games, ring tones, e-mail, and more using Mobile
Shop.
Note: For information on airtime charges, contact your Wireless Carrier.
65
At the Brew menu, highlight MobileShop, then press
Your phone takes a moment to connect, then the Mobile
Shop Catalog menu appears in the display.
Follow the instructions in your phone’s display.
Note: Please check with your Wireless Carrier for availability of applications.
Changing Your Brew Settings
Use the Settings menu in Brew to manage, move, order
applications, and much more.
1.
At the Brew menu, highlight Settings, then press
.
The following options appear in the display:
• Order Apps — Download applications over the network.
• Move Apps — Move previously downloaded applications between
available folders.
• Manage Apps — View used and available memory.
• Main Menu View — Select whether to view the main Mobile Shop
menu in a list or icon format.
• Screen Savers — Download screen savers over the network.
r600.book Page 66 Thursday, May 7, 2009 4:35 PM
• View Log — View the Mobile Shop log, which displays information
about recent activity using Mobile Shop.
2.Highlight the desired option.
3.Press
to enter the option’s sub-menu and view or
change settings.
Using On-line Help
The Help sub-menu within Brew is a short tutorial on several
Brew-Mobile Shop features. View information about charges,
cancelling subscriptions, buying apps, disabling apps, and more.
1.
At the Brew menu, highlight the Help icon.
2.
Press
. The Help subjects described in the following
subsections appear in the display.
3.
Highlight the desired Help subject.
4.
Press
to view the selected Help information.
Buying New Apps
To buy new and exciting apps, visit the MobileShop catalog. It
provides you with a variety of apps you can choose from.
What do I pay?
When you buy an app, you will be charged for the purchase cost
of the app and the network connections to download it.
Demo Apps
A Demo app is free and is designed to demonstrate the app’s
main features. It usually expires after a certain period of time or a
number of uses and often has limited functions. When you run a
demo app, you will be presented with a purchase option so you
won’t have to look for the app in the MobileShop catalog.
Removing Apps
You may remove apps that are no longer needed. When you
remove an app, you cannot use the application unless you
purchase it again. To remove an app, choose Settings > Manage
Apps. Then, select the app you want to remove.
Disabled Apps
You can install new apps even if the memory of your phone is full
by partially removing (disabling) apps you haven’t used recently.
When you need to use a disabled app, you can restore it at no
additional purchase cost.
Brew
66
r600.book Page 67 Thursday, May 7, 2009 4:35 PM
Restoring Apps
Disabled apps can be quickly restored at no additional purchase
cost. To restore an app, run the application you want to restore
from the Main Menu. You will be guided through the restoration
process.
Expired Apps
Apps that were purchased based on the number of uses or time
expire. You can purchase additional uses from the MobileShop
catalog.
67
r600.book Page 68 Thursday, May 7, 2009 4:35 PM
Section 10: Camera-Camcorder
Use your Samsung phone to take full color digital pictures and
videos, display them on your phone’s vivid color display, and
instantly share them with family and friends. It’s fun, and as easy
to use as a traditional point-and-click camera or camcorder. This
section explains how you can do the following:
• Take pictures and videos with your phone’s built-in digital cameracamcorder.
• Send and receive pictures and videos taken with your phone’s cameracamcorder.
• Set the several options associated with the camera-camcorder that
help you take crisp, clear pictures and videos.
Taking Pictures and Videos
Taking pictures videos with the built-in camera-camcorder is as
simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
1.
In standby mode, press and hold the Camera key (
2.
The camera view finder screen displays. (For more
information, refer to “Screen Layouts” on page 70.)
Note: You can also activate the camera by pressing Menu (
selecting Multimedia ➔ Camera.
3.
), then
Using the display as a viewfinder, point the camera at your
subject.
4.
Press Take (
) when the image that you wish to capture
appears in the display.
5.
Press the Save soft key to save the picture to memory.
6.
Press the Erase soft key to erase the photo.
7.
To exit the Camera feature, with the phone open press
.
Tip: You can change a number of the camera’s settings to suit particular uses
for your pictures. For more information, refer to “Camera Options” on
page 73.
)
on the right side of the phone.
Camera-Camcorder
68
r600.book Page 69 Thursday, May 7, 2009 4:35 PM
Taking Multi Shot Pictures
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
1.
In standby mode, press and hold the Camera key (
• Series Shot — Lets you take a series of 5 photos.
• Mosaic Shot — Lets you take a mosaic of 2x2 or 3x3 photos.
• Fun Frames — Lets you select different frames and borders for
your photo.
5. When you select the Series Shot option, a pop-up message
will appear stating that the image size will be fixed at
320x240 for multi-shots.
The Series Shot progress bar
)
2.
(which
acts as a progress bar while pictures are being taken)
on the right side of the phone.
appears in the display.
The camera view finder screen displays. (For more
6.
information, refer to “Screen Layouts” on page 70.)
Using the display as a viewfinder, point the camera lens at
your subject.
Note: You can also activate the camera by pressing the Menu key (
then select Multimedia ➔ Camera.
),
7.
Press Take (
) when the image that you wish to capture
appears in the display. The camera takes five pictures in
3.
Press the Options soft key. The options menu bar appears
quick succession, then the Series Shot Select to Save
in the display with the Camera icon (
screen appears in the display.
) highlighted. The
Camera and Camcorder options will be displayed with the
Camera option checked.
4.
Highlight the Multi Shot icon (
). The following Multi Shot
options appear in the display:
• Single Shot — Lets you take 1 photo.
69
r600.book Page 70 Thursday, May 7, 2009 4:35 PM
8.
9.
To save the pictures to memory, press the Done soft key.
4.
To discard the pictures, press the Erase soft key.
you press Stop (
) on the right
side of the phone.
2.
Press the Save soft key to save the video to memory.
6.
Press the Erase soft key to erase the video.
Screen Layouts
Camcorder mode, select Options and higlight Camcorder.
Camera Screen
page 72.)
Note: You can also activate the camcorder by doing one of the following:
1. Pressing Menu (
), then selecting Multimedia ➔ Camcorder.
2. From the camera screen, by pressing the Options soft key and
selecting the Camcorder icon.
3.
chosen in the camcorder settings.
5.
The camera view finder screen displays. To change to
(For more information, refer to “Camcorder Screen” on
Using the display as a viewfinder, point the camera lens at
your subject.
) or until 15 seconds of video has
been recorded, if the Limit for MMS setting has been
To take a video using the current camcorder settings, do the
following:
In Camera mode, press the Camera key (
) when the image that you wish to
capture appears in the display. Recording continues until
Taking Videos
1.
Press Record (
When you activate your phone’s camera, the
second line of the display is reserved for the
current camera resolution setting and the
picture counter. The center of the display
shows a viewfinder image of the subject at
which the camera is pointed.
The soft key labels on the bottom line of the display change to
the following:
• Gallery — Pressing the Left soft key opens the My Images
multimedia folder so you can view or manage your stored pictures.
(For more information, refer to “The Photo Gallery” on page 80.)
• Take — Pressing
takes a picture of the image currently
appearing on the display.
Camera-Camcorder
70
r600.book Page 71 Thursday, May 7, 2009 4:35 PM
• Options — Pressing the Right soft key opens a menu bar of camera
options and settings.
Camera Screen Icons
Camera — Indicates the camera is active.
Brightness — Brightens or darkens the
image from 4 to +4.
Single Shot in use — Takes one picture at
a time when you press Take (
).
Series Shot in use — Takes five pictures in
Night Shot — Indicates the camera is set to
take pictures in low light.
Camera Resolution — Indicates camera’s
current resolution setting. (You can change
the camera resolution setting. For more
information, refer to “Camera Options” on
page 73.)
Photo Limit — Indicates the available
number of photos you can take. (Depending
on the camera resolution setting.)
White Balance — Indicates camera’s white
balance setting. (You can change the camera
white balance setting. (For more information,
refer to “White Balance” on page 75.)
Zoom — Enlarges the image from X0 to X9
before you take a picture. (Depending on the
camera resolution setting.)
71
succession when you press Take (
).
Mosaic Shot in use — Takes 2x2 or 3x3
mosaic pictures when you press Take
(
).
Self Timer in use — Delays the camera
shutter for 3, 5, or 10 seconds after you
press Take (
).
Settings — Allows you to change your
camera settings. (For more information,
refer to “Settings” on page 76.)
r600.book Page 72 Thursday, May 7, 2009 4:35 PM
Camcorder Screen
When you activate your phone’s camcorder,
the first line of the display is shows current
camcorder setting icons. The center of the
display shows a viewfinder image of the
subject at which the camcorder is pointed.
The soft key labels on the bottom line of
the display change to the following:
• Gallery — Pressing the left soft key ( ) opens the My Videos
multimedia folder so you can view or manage your stored pictures.
(For more information, refer to “The Photo Gallery” on page 80.)
• Record — Pressing the
key starts the camcorder recording a
video of the image currently appearing in the display.
• Options — Pressing the right soft key ( ) opens a menu bar of
camcorder options and settings.
Camcorder Screen Icons
Camcorder — Indicates the camcorder is
active.
White Balance — Indicates the camcorder’s
white balance setting. (You can change the
camcorder white balance setting. For more
information, refer to “White Balance” on
page 75.)
Zoom — Enlarges the image from X0 to X9
before you take a video. (Depending on the
camcorder quality setting.)
Brightness — Brightens or darkens the
image from
4 to +4.
Self Timer in use — Delays the camcorder
from recording for from 10, 5 or 3 seconds
after you press
.
Recording Mode Normal— Indicates
camcorder is set to Normal mode.
Recording Mode Limit for MMS — Indicates
Recording Mode is set to Limit for MMS
which limits video to 15 seconds in length.
Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
• Save the picture or video by pressing the Save soft key.
Camera-Camcorder
72
r600.book Page 73 Thursday, May 7, 2009 4:35 PM
A picture is stored in the My Images folder. A video is stored in the
My Videos folder. These folders are part of the phone’s memory
and/or part of an optional Memory Card devoted to storing,
browsing, and viewing saved pictures and videos. (For more
information, refer to “The Photo Gallery” on page 80.)
• Send the picture or video to someone else by pressing Send (
).
For a detailed procedure, see “Creating and Sending a Picture
Message” on page 50.
• Discard the picture or video by pressing the Erase soft key.
Camcorder
䊳
Camera Options
In standby mode, press and hold the Camera key (
).
The camera menu screen appears in the display.
). Select Camcorder. The Camcorder view
finder screen appears in the display.
Multi Shot
Multi Shot mode lets you choose between single shots, multiple
shots or a mosaic of pictures. You can also use Fun Frames to
create borders around your pictures.
2.
The camera view finder screen displays.
3.
Press the Options soft key. The options menu bar appears
the Multi Shot icon (
in the display showing the following options:
• Single Shot — Takes one picture at a time when you press
Take (
).
• Series Shot — Takes five pictures in succession when you
press Take (
).
• Mosaic Shot — Takes 2x2 or 3x3 mosaic pictures when
you press Take (
).
•
•
•
•
73
In camera mode, press the Options soft key, then highlight the
Camera icon (
The Camera Options let you adjust the default camera settings to
suite available lighting, the subject of the photo, or the purpose of
the photo. To access Camera Options, do the following:
1.
• Self Timer
• White Balance
• Color Effects
• Shortcut
• Settings
4. Highlight the desired option and select the desired setting.
Camcorder
Multi Shot
Resolution
Nite Shot
1.
In camera mode, press the Options soft key, then highlight
). The following options pop-up:
r600.book Page 74 Thursday, May 7, 2009 4:35 PM
• Fun Frames — Fun Frames lets you temporarily apply one
of the preloaded picture frames in your phone to
characterize or enhance one or more pictures.
2. Select the desired option and setting. The related icon
appears in the display.
Note: When Shot Mode is set to Series Shot, a Series Shot progress bar
(
) appears in the viewfinder screen.
Fun Frames
Note: The None frame is a blank frame.
1.
In camera mode, press the Options soft key, then highlight
Shot Mode icon and select Fun Frames. A pop-up menu of
Resolution
Change the size (in bytes) of your pictures using the Resolution
setting.
1.
the Resolution icon (
1600 X 1200 (pixels)
1280 X 960 (pixels)
640 X 480 (pixels)
320 X 240 (pixels)
176 X 144 (pixels)
Picture ID — lets you take pictures the correct size and resolution
for Contacts list picture IDs.
2. Select the desired option. You’re returned to the camera
viewfinder screen.
Use the Left and Right navigation keys to show the various
Fun Frames.
3.
). The following options pop-up:
•
•
•
•
•
•
the available Fun Frames appears in the display.
2.
In camera mode, press the Options soft key, then highlight
Select the frame you wish to use. The camera screen
appears in the display with your selected Fun Frame in
place.
When you take your next picture, the camera includes the
selected Fun Frame in your picture.
Note: The Resolution setting affects zoom capabilities. When Resolution is
set to 1600 X 1200, zoom is not available. When Resolution is set to
any value lower than 1600 X 1200, zoom settings 1 – 9 are available.
Night Shot
Night Shot lets you take pictures in low light conditions.
1.
In camera mode, press the Options soft key, then highlight
the Night Shot icon (
).
Camera-Camcorder
74
r600.book Page 75 Thursday, May 7, 2009 4:35 PM
The following options appear in the display:
• Off
• On
2. Select the Night Shot setting of your choice. You’re
• 3 Sec.
• Off
2. Select the desired Self Timer option. If you select 3 Sec., 5
sec., or 10 sec., the Self Timer icon appears in the camera
screen in the display.
returned to the camera viewfinder screen.
When you press Take (
Self Timer
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
1.
In camera mode, press the Options soft key, then highlight
the Self Timer icon (
• 10 Sec.
• 5 Sec.
), the countdown timer
indicates the time remaining before the camera takes the
picture.
Tip: To stop the countdown timer without resetting it, press
.
) The following options pop-up:
White Balance
White Balance allows you to adjust picture quality according to
available light.
1.
In camera mode, press the Options soft key, then highlight
the White Balance icon (
). The following options pop-
up:
• Auto — The camera automatically adjusts picture quality to
available light.
• Sunny — Use this setting when taking pictures in full sun.
• Cloudy — Use this setting when taking pictures in cloudy
conditions.
75
r600.book Page 76 Thursday, May 7, 2009 4:35 PM
• Tungsten — Use this setting when taking pictures under
incandescent lights.
• Fluorescent — Use this setting when taking pictures under
fluorescent lights.
Each option, as you highlight it, shows the effects it has on a
picture.
2. Select the White Balance you wish to use. The camera
viewfinder screen appears in the display with your
the camera viewfinder screen.
selected White Balance applied.
When you take your next picture, the phone’s display
The next time you press Take (
the selected White Balance to your picture.
Settings
1.
Change the look of your pictures with Color Effects. Choose from
eight available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
In camera mode, press the Options soft key, then highlight
the Color Effects icon (
previews your subject image with the selected color effect.
), the camera applies
Color Effects
1.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• Antique — Subjects and pictures appear in a darker Sepia hue.
• Negative — Subjects and pictures appear in inverted colors.
• Green — Subjects and pictures appear in a greenish hue.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice. You’re returned to
). The following options pop-up:
Note: Choose Normal to disable Color Effects.
• Normal — Subjects and pictures appear with a normal hue.
• Black&White — Subjects and pictures appear in black and white.
In camera mode, press the Options soft key, then highlight
the Settings icon (
). Press OK.
The Camera Settings display will appear. Use the Up and
Down keys to scroll through the following settings:
• Default Storage — Select either Phone Memory or Card Memory.
• Quality — Select High, Normal, or Economy. Higher quality
settings take up more storage space.
• ISO — Select Auto, 100, 200, or 400. The higher the ISO value,
the faster the shutter speed of the camera. Also, the higher the ISO
value, the better the lighting conditions should be.
• Metering — Select either Average, Center-weighted, or Spot.
Camera-Camcorder
76
r600.book Page 77 Thursday, May 7, 2009 4:35 PM
– Average — Adjusts exposure to the average light level over a large
picture area.
– Center-weighted — Adjusts exposure to the average light level over a
center portion of the subject.
– Spot — Adjusts exposure to the light level over a small portion of the
subject.
Camcorder Options
The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video. To access Camcorder Options, do the
following:
1.
• View Mode — Select either Portrait or Landscape.
– Landscape — Shows a wider, more panoramic view of the subject.
– Portrait — Shows a narrower, more vertically oriented view of the
subject.
• Shutter Sound — Select either Shutter1, Shutter2, Shutter3, OK,
Melody, or Off.
• Auto Save — Select either On or Off.
• Camera
• Recording Mode
• Self Timer
• White Balance
• Color Effects
• Shortcut
• Settings
2. Highlight the desired option and select the desired setting.
Reset Settings
1.
In camera mode, press the Options soft key, then highlight
2.
Press the Reset soft key.
the Settings icon (
) and press OK (
).
You are prompted to confirm reset of all camera settings.
• Select Yes to reset the camera settings to default values.
• Select No to keep the current camera settings.
77
In Camcorder mode, press the Options soft key. The
following sub-menus appear in the display:
Camera
䊳
In camcorder mode, press the Options soft key, then highlight
the Camcorder icon (
). Select Camera. The Camera view
finder screen appears in the display.
r600.book Page 78 Thursday, May 7, 2009 4:35 PM
Recording Mode
1.
2.
highlight the Recording Mode icon (
). The following
The next time you press Record (
options appear in the display:
), a countdown timer
in the display indicates the time remaining before the
• Limit for MMS — Record videos that are a maximum of 15
seconds long. The videos can be included in video messages.
• Normal — Record videos that are any length up, depending on
available memory.
2. Select the desired recording mode setting. The camcorder
viewfinder screen appears in the display.
Self Timer
Self Timer lets you delay taking a video long enough to let you
join others in the video.
1.
Select the desired delay. The camcorder viewfinder screen
appears in the display.
In camcorder mode, press the Options soft key, then
camcorder starts recording the video.
Tip: To stop the countdown timer without resetting it, press
.
White Balance
White Balance allows you to adjust video quality according to
available light.
1.
In camcorder mode, press the Options soft key, then
highlight the White Balance icon (
). The following
In camcorder mode, press the Options soft key, then
options pop-up:
highlight the Self Timer icon (
• Auto — The camcorder automatically adjusts color balance to
available light.
• Sunny — Use this setting when recording videos in full sun.
• Cloudy — Use this setting when recording videos in cloudy
conditions.
• Tungsten — Use this setting when recording videos under
incandescent lights.
• Fluorescent — Use this setting when recording videos under
fluorescent lights.
appear in the display:
•
•
•
•
10 Sec.
5 Sec.
3 Sec.
Off
). The following options
Camera-Camcorder
78
r600.book Page 79 Thursday, May 7, 2009 4:35 PM
2.
Use the Up and Down navigation keys to show the various
White Balances and the effects they have on a video.
3.
Select the White Balance you wish to use. The camcorder
viewfinder screen appears in the display with your
camcorder viewfinder screen.
selected White Balance applied.
When you record your next video, the phone’s display
The next time you press Record (
Color Effects
In camcorder mode, press the Options soft key, then
).
Note: Choose Normal to disable Color Effects.
•
•
•
•
•
79
Settings
1.
Change the look of your videos with Color Effects. Choose from
eight available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
highlight the Color Effects icon (
previews your subject image with the selected color effect.
), the camcorder
applies the selected White Balance to your video.
1.
• Green — Subjects and pictures appear in a greenish hue.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color tone of your choice. You’re returned to the
Normal — Subjects and pictures appear with a normal hue.
Black&White — Subjects and pictures appear in black and white.
Sepia — Subjects and pictures appear in a brownish-gray hue.
Antique — Subjects and pictures appear in a darker Sepia hue.
Negative — Subjects and pictures appear in inverted colors.
In camcorder mode, press the Options soft key, then
highlight the Settings icon (
). Press OK.
The Camcorder Settings display will appear. Use the Up
and Down keys to scroll through the following settings:
• Default Storage — Select either Phone Memory or Card Memory.
– Phone — Stores videos in phone memory.
– Card — Stores videos on an optional microSD Memory Card.
• Quality — Select High, Normal, or Economy. Higher quality
settings take up more storage space.
• Start Sound — Choose from three different sounds
whenever you begin video recording. Aside from being a
cool sound effect, Start Sound acts as an audible reminder
that your camcorder has begun recording a video. Select
between Beep, Look Here, 1,2,3!, or Off.
r600.book Page 80 Thursday, May 7, 2009 4:35 PM
• End Sound — Choose from three different sounds whenever
you stop video recording. Aside from being a cool sound
effect, End Sound acts as an audible reminder that your
camcorder has stopped recording a video. Select between
Beep, OK, Melody, or Off.
• Auto Save — Select either On or Off.
Reset Settings
1.
In camcorder mode, press the Options soft key, then
highlight the Settings icon (
2.
) and press OK.
The next time you press Take/Record (
enlarged video according to your selected Zoom setting.
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
䊳
In camera or camcorder viewfinder screen, use the Left and
Press the Reset soft key.
Right navigation keys to adjust the Brightness (the screen
You are prompted to confirm reset of all camcorder
image lightens or darkens to show the affects of your
settings.
changes).
The next time you press Take/Record (
• Select Yes to reset the camera settings to default values.
• Select No to keep the current camera settings.
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (1 – 9) enlarges your pictures or videos (0 is
normal).
In camera or camcorder viewfinder screen, use the Up and
Down navigation keys to adjust the Zoom (the screen image
enlarges to show the affects of your changes).
), the camera
takes a lighter or darker picture or the camcorder records
Zoom
䊳
), the camera
takes an enlarged picture or the camcorder takes an
a lighter or darker video according to your selected
Brightness setting.
The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
1.
In the Camera viewfinder screen, press the Gallery soft
key. Any pictures that you’ve saved appear in the display.
Camera-Camcorder
80
r600.book Page 81 Thursday, May 7, 2009 4:35 PM
2.
Use the Navigation key to browse pictures in the gallery.
3.
Press the Options soft key while viewing pictures in the
Gallery. The following options appear in the display:
• Send — Send the currently displayed or highlighted picture as a
Picture message.
• Set As — Assign the currently displayed or highlighted picture to
be the Main (standby screen) Wallpaper, the Front Wallpaper, or as
a Picture ID for someone in your Contacts list.
• Erase Files — Erase selected unlocked pictures in the Picture
Gallery. Locked pictures must be unlocked before you can erase
them.
• Move — Relocate the currently displayed or highlighted picture
from phone memory to a Memory Card or from a Memory Card to
phone memory.
• View by Location — Lets you view all pictures or just the pictures
in your phone memory or card memory.
• Rename — Rename the currently displayed or highlighted picture.
• Lock / Unlock — Lock the currently displayed or highlighted
picture so that it cannot be deleted, or unlock the picture so that it
can be deleted.
• Slide Show — Show the pictures as a full screen slide show.
• Picture Info — View the name, time and date created, size, and
resolution of the currently highlighted or displayed picture.
81
4.
Select the desired option to perform its function or to enter
its sub menu.
Switch From Expanded to Thumbnail Mode
1.
Use the Navigation key to highlight a picture that you wish
to view full size, press VIEW (
2.
Press VIEW (
).
) again to return to the thumbnail view of
your photos.
Point, Click, and Send Pictures and Videos
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
1.
In standby mode, press and hold the Camera key (
) to
activate the camera.
2.
The camera view finder screen displays.
3.
Using the display as a viewfinder, take the desired picture
or record the desired video by pressing Take/Record
(
4.
).
Press Stop (
) to stop video recording.
Press Send (
). You are prompted to send the picture(s)
or video to the phone’s memory.
r600.book Page 82 Thursday, May 7, 2009 4:35 PM
5.
The Create Pic Msg or Create Video Msg screen appears in
the display.
6.
Enter the recipient’s phone number or email address using
the keypad.
7.
Press OK (
) to save the address(es) and move to the
Subject field. Use the navigation keys to move to the other
message fields. For more information, refer to
“Messaging” on page 49.
8.
When you are finished composing your message, press
SEND (
) to send the Picture or Video message to the
intended recipients.
Camera-Camcorder
82
r600.book Page 83 Thursday, May 7, 2009 4:35 PM
Section 11: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
Accessing Multimedia
1.
In standby mode, press Menu (
), then select
Multimedia. The following Multimedia sub-menus appear
in the display:
• Camera — Lets you launch and set up your phone’s camera. (For
more information, refer to “Camera-Camcorder” on page 68.)
• Camcorder — Lets you launch and set up your phone’s
camcorder. (For more information, refer to “CameraCamcorder” on page 68.)
• Music Player — Lets you play and manage music files stored on a
memory card.
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
• My Videos — Lets you choose the videos that appear in your
phone’s display.
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
• My Sounds — Lets you assign melody tones for calls, alarms, and
other alerts.
83
2.
Select a sub-menu to launch it. The following sections
describe the above listed sub-menus in greater detail.
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (wallpaper) and as picture
IDs for your contacts.
1.
From the Multimedia menu, select My Images.
If there are no pictures stored in your phone or on a
memory card, “Empty” appears in the My Images screen.
[To launch the camera to take a picture, press the Camera
soft key. (For more information, refer to “CameraCamcorder” on page 68.)]
If there are pictures stored in your phone or on a memory
card, up to four thumbnail images of your pictures appear
in the display.
r600.book Page 84 Thursday, May 7, 2009 4:35 PM
Size.
Tip: You can also access My Images from:
-The Camera screen, by pressing the Gallery soft key.
– or –
-The Edit Contact screen, by selecting the picture ID field and pressing
the Set soft key.
Press VIEW (
2.
Prior to viewing the picture file, press the Options soft key.
3.
A pop-up menu containing the following options appears in
the display:
• Send — Lets you send the selected image to a specified recipient
in a Picture message.
• Set As — Lets you assign the selected picture as the Main
Wallpaper, the Picture ID for a Contact, or the Front Wallpaper.
• Erase Files — Erases one or more selected, unlocked pictures.
• Move— Moves the selected picture to the memory card. (a
memory card must be inserted for this option to display).
• View by location— Allows you to view All photos, photos saved to
the Phone Memory, or photos saved to Card Memory.
• Rename — Lets you rename the picture.
• Lock—Locks the picture from being accidentally deleted.
• Slide Show — Shows the available images as a sequence of fullscreen pictures.
• Picture Info — Displays information about the picture, such as the
picture Name, creation Date and Time, Resolution, and the data
) to expand the selected picture to fill the
screen.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Send — Lets you send the selected image to a specified recipient
in a Picture message.
• Set As — Lets you assign the selected picture as the Main
Wallpaper, the Picture ID for a Contact, or the Front Wallpaper.
• Erase — Erases one or more selected, unlocked pictures.
• Rename — Lets you rename the picture.
• Lock—Locks the picture from being accidentally deleted.
• Slide Show — Shows the available images as a sequence of fullscreen pictures.
• Picture Info — Displays information about the picture, such as the
picture Name, creation Date and Time, Resolution, and the data
Size.
4. Select the desired option.
5.
Press
to return to the previous menu, or press
to return to standby mode.
Multimedia
84
r600.book Page 85 Thursday, May 7, 2009 4:35 PM
My Videos
My Videos lets you take videos, review your videos, send them as
video messages, and assign your videos as wallpaper on your
phone.
1.
From the Multimedia menu, select My Videos.
If there are no videos stored in your phone or on a memory
card, “Empty” appears in the My Videos screen.
If there are videos stored in your phone or on a memory
card, up to four thumbnail images from your videos appear
in the My Videos screen.
2.
To take a new video, press the Video soft key. The
camcorder view finder screen appears in the display. For
• Send — Lets you send the selected video to a specified recipient in
a Video message.
• Set As Main Wallpaper— Lets you assign the selected video as
the Main Wallpaper.
• Erase Files — Erases one or more selected, unlocked videos.
• Move — Lets you move the video from the phone to the memory
card or from the memory card to the phone.
• View by Location — Lets you view all videos or just the videos in
your phone memory or card memory.
• Rename — Lets you change the name of the video.
• Lock / Unlock — Lets you protect the video from being deleted.
• Video Info — Displays information about the video, such as the
video Name, creation Date and Time, Resolution, data Size, and
the Duration.
5. Select the desired option.
more information, refer to “Camera-Camcorder” on
page 68.
6.
Press
to return to the previous menu, or press
to return to standby mode.
3.
To play a video, use the navigation keys to highlight a
video, then press the Play soft key. The Video Player screen
appears in the display and begins playing the highlighted
video.
4.
For more My Videos options, press the Options soft key.
The following options appear in the display:
85
r600.book Page 86 Thursday, May 7, 2009 4:35 PM
Music Player
Music Player lets you play music files (such as, CMX, MIDI, MP3,
AAC, AAC+, and eAAC+) stored on a Memory Card.
Note: A microSD Memory Card must be installed for the Music Player to
launch. (For more information, refer to “Memory Card (Optional)” on
page 8.)
Launching the Music Player Library Menu
1.
From the Multimedia menu, select Music Player.
Tip: You can also directly access the Music Player by using the Music Player
shortcut. In standby mode, press
.
The Music Player screen
appears in the display.
2.
To select a music file to play,
press the Library soft key or
the Library (Up navigation)
3.
Highlight a music file, then:
• Press the Play soft key to play
the file.
• Press MARK (
) to select
the file for playing or other
options.
• Press the Options soft key to
select and apply any of the
following options to the
highlighted or marked music
files(s):
– Mark All — Marks all listed music files for playing, removal, or
assignment of player settings.
– Erase — Deletes highlighted or marked music file(s) from the Memory
Card.
– Add to Playlist — Adds the highlighted or marked music file(s) to a
new or existing playlist.
– Song Info — Lists the title, artist, album, genre, copyright information,
time length, file size, and bitrate of the highlighted music file.
• Select the desired option.
key. Select one of the
following Library options:
Now Playing, All, Artists,
Albums, or Playlists and
press OPEN.
Multimedia
86
r600.book Page 87 Thursday, May 7, 2009 4:35 PM
Playing Music
1.
The Music Player screen
From the Multimedia menu,
appears in the display and
select Music Player.
the selected music file
begins playing.
Tip: You can also directly access the
Music Player by using the Music
Player shortcuts. In standby mode,
press
.
2.
Press the Library soft key or
the Library (Up navigation)
key. Select one of the
following Library options: Now Playing, All, Artists, Albums,
or Playlists and press OPEN.
3.
Highlight a music file, then:
• Press the Play soft key to play the file.
– or –
• Press MARK (
) to select the file for playing, highlight and
mark other music files for playing, then press the Play soft key to
play the marked file(s).
Music Player Controls:
• Volume key:
– To play a music file louder, press
the Volume key Up.
– To play a music file softer, press
the Volume key Down.
• Navigation key:
– To pause/resume playing a music file, press
.
Note: With the flip closed, use the key pad on the front of the phone to pause/
resume playing a music file.
– To stop playing a music file, press the Down navigation key.
– To skip play to an earlier music file in the selected list, press the Left
navigation key.
– To skip play to a later music file in the selected list, press the Right
navigation key.
– To return to the selected list and choose another music file to play, press
the Up navigation key.
• Library soft key — Returns you to the Library screen.
87
r600.book Page 88 Thursday, May 7, 2009 4:35 PM
• Options soft key — Shows the following sub-menus and options:
– Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, or Repeat All.
– Add to Playlist — Moves you to the Playlists menu to let you add the
selected music file to a playlist.
– Remove From Playlist — Temporarily drops the selected music file
from the Library list. To restore the music file to the list, turn your phone
off and back on again.
– Visual Supplements — Lets you change the Music Player
visualization to Simple View, Equalizer, Album Art, or Lyrics.
– Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability amounts.
– Song Info — Lists the title, artist, album, genre, copyright information,
time length, file size, and bitrate of the highlighted music file.
4. Select the desired option to launch the option or to access
the sub-menu.
My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
1.
From the Multimedia menu, select My Ringtones. A list of
ringtones appears in the display.
Tip: You can also access My Ringtones from:
-A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones.
-The Edit Contact screen by selecting the Ringtone field, pressing the Set
(left) soft key ( ), and selecting My Ringtones.
2.
Use the navigation keys to highlight a particular ringtone.
• Press
to PLAY the ringtone.
• Press the Info soft key to show the file name and file type.
3. Press the Set As soft key to assign the highlighted ringtone.
The following options appear in the display:
• Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
• Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
• Alert Tone — Lets you assign the selected ringtone to All Msg,
Text Msg, Picture Msg, or Voicemail Msg.
4. Select the desired option.
5.
When using a downloaded ringtone, press the Options soft
key and the following options appear in the display:
• Lock / Unlock — Lets you prevent/permit file deletion.
• Erase — Erases the selected file.
Multimedia
88
r600.book Page 89 Thursday, May 7, 2009 4:35 PM
• Erase All — Erases all downloaded ringtones.
• Ringtone Info — Displays information about the selected file, such
as the file name, the file type, and the data size.
6. Select the desired option.
7.
Press
to return to the previous menu, or press
to return to standby mode.
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
1.
From the Multimedia menu, select My Sounds. Record New
and a list of sound files appears in the display.
Tip: You can also access My Sounds from:
-A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Sounds.
-The Edit Contact screen by selecting the Ringtone field, pressing the Set
soft key, and selecting My Sounds.
Note: Recorded sound files (voice memos) do not appear in these lists.
2.
Select the Record New option to record a voice memo. (For
more information, refer to “Voice Memo” on page 90.)
89
3.
Press the Options soft key.
• For a recorded sound file, a pop-up menu containing the following
options appears in the display:
– Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
– Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
– Rename — Lets you rename the sound file.
– Lock / Unlock — Lets you protect the sound file from being deleted.
– Erase All — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
file name, file size, file type, date, and time.
• For a preloaded sound file, a pop-up menu containing the following
options appears in the display:
– Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
– Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
– Erase All — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
file name, file type, and the data size.
• For a downloaded sound file, the following options appear in the
display:
r600.book Page 90 Thursday, May 7, 2009 4:35 PM
– Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
– Rename — Lets you rename the sound file.
– Lock / Unlock — Lets you protect the sound file from being deleted.
– Erase All — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
file name, file type, and the data size.
4.
Select the desired option.
5.
Press
to return to the previous menu, or press
to return to standby mode.
Voice Memo
2.
You can save as many voice memos as will fit in the empty
memory capacity.
Record a Voice Memo
1.
From the Multimedia menu, select My Sounds ➔ Record
), then start speaking. As it is recording
the phone displays a countdown timer that shows the
seconds remaining for the recording.
• To pause the memo, press the Pause soft key. When a memo is
paused, select Resume to continue recording.
3. Press SAVE (
) once you’re finished recording. The new
recording is saved, and the standby mode screen appears
in the display.
Review Voice Memos
If you’ve saved any voice memos, you can review them anytime.
1.
In standby mode, press Menu (
), then select
Multimedia ➔ My Sounds. A list of sound files appears in
You can use your phone to record voice memos for later
playback.
Note: The maximum length for a single voice memo is 60 seconds.
Press REC (
the display.
2.
Highlight the voice memo you wish to review.
3.
Press PLAY (
) to play the voice memo.
• To stop the memo, press STOP (
). Press
again to
restart playing the memo.
When the voice memo finishes playing, the selected voice
memo remains highlighted in the list of sound files.
New. The Record New screen appears in the display.
Multimedia
90
r600.book Page 91 Thursday, May 7, 2009 4:35 PM
Erase One Voice Memo
1.
In standby mode, press Menu (
), then select
Multimedia ➔ My Sounds. A list of sound files appears in
the display.
2.
Highlight the voice memo you wish to erase.
3.
Press the Erase soft key. “Erase Sound?” appears in the
display.
4.
To erase the selected voice memo, press the Yes soft key.
To retain the selected voice memo, press the No soft key.
Erase All Voice Memos at One Time
1.
From the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
2.
Use the navigation keys to highlight a voice memo.
3.
Press the Options soft key. The following options appear in
the display:
• Send — Lets you send a copy of this voice memo as part of a
picture message.
• Set As — preloaded sound files only — Lets you set this sound file
as a Ringtone, Contact ID ringer, or Alert Tone.
• Rename — Lets you change the name of this voice memo.
91
• Lock/Unlock — Blocks/permits erasure of this voice memo.
• Erase all — Erases all unlocked sound files that are not preloaded.
• Sound Info — Shows you the Title, File Size, File Type, and Date
for this sound file.
4. Select Erase all. “Erase All Sounds?” appears in the display.
5.
To erase all of the sound files, press the Yes soft key. To
retain sound files, press the No soft key.
r600.book Page 92 Thursday, May 7, 2009 4:35 PM
Section 12: Tools
This section explains how to use your phone’s digital assistant
functions to view today’s calendar, schedule events, set
reminders, perform calculations, and more.
Accessing Your Phone’s Tools
To launch the Tools menu:
䊳
In standby mode, press Menu (
) ➔ Tools.
The Tools menu appears in the display.
Bluetooth
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
To turn Bluetooth support on:
䊳
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
From the Tools menu, select Bluetooth ➔ Bluetooth Settings ➔
Enable.
“Bluetooth set to on” and the black Bluetooth On icon (
)
appear in the display.
To turn Bluetooth support off:
䊳
From the Tools menu, select Bluetooth ➔ Bluetooth Settings ➔
Disable.
“Bluetooth set to off” appears in the display and the and
the black Bluetooth On icon (
) disappears.
Tools
92
r600.book Page 93 Thursday, May 7, 2009 4:35 PM
Add New Device
6.
1.
messages appear to inform you that pairing with the
Device.
device and connecting to it are complete.
on?”. Press the Yes soft key to turn Bluetooth on.
Note: Press the No soft key to leave Bluetooth off and return to the Bluetooth
sub menu.
“Place device you are connecting to in discoverable mode”
appears in the display.
3.
Place the Bluetooth device in discoverable mode. (See the
Note: If you are pairing and connecting to another phone or to a personal
computer, both devices prompt for a passkey or PIN. To successfully
pair and connect your phone with the other device, the same passkey
or PIN must be entered on both devices.
Registered List
This menu provides a list of
Bluetooth wireless technology
devices discovered by your handset.
1.
From the Tools menu, select
device user manual for more information.)
Bluetooth ➔ Registered List.
Press
A list of registered Bluetooth
. Your phone searches for available Bluetooth
devices appears in the display.
devices. The names of available devices appears in the
Connecting to a Bluetooth Device
display.
4.
Highlight the device you want to pair with your phone.
5.
Press PAIR (
From the Registered List,
) to pair the highlighted device with the
1.
Select a device.
phone. You are prompted to enter the passkey or PIN for
2.
If you are unable to connect with the device a pop-up
the selected device.
93
. (See the
From the Tools menu, select Bluetooth ➔ Add New
If Bluetooth is off, you are prompted to “Turn Bluetooth
2.
Enter the device passkey or PIN and press
device user manual for more information.) Pop-up
To search for available Bluetooth devices:
appears in the display. Press the Yes soft key to retry.
r600.book Page 94 Thursday, May 7, 2009 4:35 PM
Disconnecting from a Bluetooth Device
From the Registered List,
䊳
Highlight the device and press the Off soft key.
Managing Your Registered List
From the Registered List,
1.
Highlight a device and press the Options soft key. The
following options appear in the display:
• Remove Device — Deletes the device from the Registered List.
• Rename Device — Lets you change or replace the device name,
as needed.
• Incoming Security — Allows you to choose whether or not you
will be asked before being connected to other Bluetooth devices.
• Device Info — Shows the type of device, status, address, the date
when it was paired with your phone, and the date the device was
last connected with your phone.
• Get Files — Lets you connect to another device to get images,
videos, ringtones, or sounds.
• Send Name Card — Allows you to send one or more selected
Contacts entries to another compatible phone or other device over a
Bluetooth connection.
2. Select the desired option.
Bluetooth Settings
Enable/Disable
Selecting this option turns Bluetooth on or off. (For more
information, see “Turn Bluetooth On/Off” on page 92.)
Discovery Mode
Allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.
Device Name
Shows the handset name. You may change this name. Enter the
text and press
.
Supported Profiles
Lists the Bluetooth profiles your phone supports. Selecting a
profile shows a description of that profile.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
Tools
94
r600.book Page 95 Thursday, May 7, 2009 4:35 PM
Calendar
Calendar allows you to view the
current, past, or future month in
calendar format. While viewing the
calendar, the current date is
highlighted, and days with scheduled
events are surrounded by a box.
Navigating the Calendar
1.
From the Tools menu, select
Add a New Event
1.
The calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
2.
2.
4.
Enter the Appointment Name using the keypad. (For more
information, refer to “Entering Text” on page 45.)
5.
Use the Up/Down navigation keys to highlight the following
Use the following controls to highlight a date in the
New Event options:
Calendar screen:
• Start Date — Populated with highlighted Calendar date. To change
the date, use the keypad.
• Start Time — Populated with the current time (rounded to the
nearest half-hour). To change the time, use the keypad.
– Use the Left/Right navigation keys to select AM or PM.
• End Date — Populated with highlighted Calendar date. To change
the date, use the keypad.
• Left/Right navigation keys — Move the highlighting back/ahead
one day per keypress.
• Up/Down navigation keys — Move the highlighting back/ahead
one week per keypress.
• Up/Down volume keys — Moves the date and screen back/
ahead one month per keypress.
95
Press Add. The New Event screen appears in the display
with the Appointment Name option highlighted.
highlighted. The month and year appear at the top of the
display.
Navigate to a desired date. (For more information, refer to
“Navigating the Calendar” on page 95.)
3.
Calendar.
The calendar appears in the display with the current date
From the Tools menu, select Calendar.
r600.book Page 96 Thursday, May 7, 2009 4:35 PM
• End Time — Populated with a time one half-hour later than the
Start Time. To change the time, use the keypad.
– Use the Left/Right navigation keys to select AM or PM.
• Alert — Select Tone / Vibrate using the Left/Right navigation keys.
– To select a particular Tone, use the Up/Down navigation keys to highlight
the current Tone and press the Left/Right navigation key. The Alert
Tone menu appears in the display. (For more information, refer to
“Ringer Type” on page 115.)
• Reminder — Select Once / Every 2 Minutes / Every 15 Minutes /
Off using the Left/Right navigation keys.
• Alert Time — Select 15 Min. Before / 30 Min. Before / 1 Hour
Before / 3 Hours Before / 5 Hours Before / 1 Day Before / On
Time / 5 Min. Before / 10 Min. Before using the Left/Right
navigation keys.
6. To store this Event in your Calendar, press SAVE (
). An
alarm will notify you prior to the Event, if Reminder is set to
a value other than Off.
View/Change an Event
1.
From the Tools menu, select Calendar.
A calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
2.
Navigate to a desired date. (For more information, refer to
“Navigating the Calendar” on page 95.)
3.
To open the highlighted date and show a list of Events,
press VIEW (
4.
).
Highlight an Event to view, then press VIEW (
) to
display the specifics of the highlighted Event.
5.
To scroll the Event contents, use the Up/Down navigation
keys.
6.
To change the event details, press the Edit soft key. (For
more information, refer to “Add a New Event” on
page 95.)
7.
8.
To return to the Events list, press
.
For other options, press Options. The following options
appear in the display:
• Monthly — Returns you to the Calendar screen.
• Erase — Remove this event from the Calendar.
• Erase All — Erase all events from the Calendar.
9. Select an option to invoke its function.
display.
Tools
96
r600.book Page 97 Thursday, May 7, 2009 4:35 PM
Memo Pad
Create notes and store them in
Memo Pad. Notes that you create in
Memo Pad can’t be prioritized or
assigned an alert. Return to Memo
Pad anytime to review and edit your
notes.
Create a Memo
1.
From the Tools menu, select
Memo Pad. A list of any stored Memos appears in the
display.
2.
To add a Memo, press Add. A numbered Memo screen
appears in the display.
3.
Enter Memo text using the keypad. (For more information,
refer to “Entering Text” on page 45.)
4.
When you’re finished entering details for the Memo, press
5.
To discard this Memo and return to the Memo Pad screen,
. The Memo is saved.
press Cancel.
97
Review, Edit, and Erase Memos
1.
From the Tools menu, select Memo Pad. A list of any stored
Memos appears in the display.
2.
To review a Memo:
• Highlight a Memo and press VIEW (
). The numbered Memo
view screen appears in the display.
• Use the Up/Down navigation keys to scroll the Memo text.
3. To edit a Memo:
• From the Memo Pad screen, highlight the Memo and press
Options. The following options appear in the display:
– Edit — Change the currently highlighted Memo.
– Erase — Erase the highlighted Memo.
– Erase all — Erase all of the unlocked memos.
– Lock / Unlock — Prevent/allow erasure of the highlighted Memo.
Select Edit. The numbered Memo edit screen appears in the
display.
• From the Memo view screen, press Edit. The numbered Memo
edit screen appears in the display.
• Use the keypad to change the Memo text. (For more information,
refer to “Entering Text” on page 45.)
• When you’re finished changing the Memo, press
. The
changed Memo is saved.
r600.book Page 98 Thursday, May 7, 2009 4:35 PM
4.
To erase a Memo:
• From the Memo Pad screen, highlight the Memo and press
Options. The following options appear in the display:
– Edit — Change the currently highlighted memo.
– Erase — Erase the highlighted memo.
– Erase all — Erase all of the unlocked memos.
– Lock / Unlock — Prevent/allow erasure of the highlighted memo.
Select Erase. You are prompted to confirm the erasure.
• From the Memo view screen, press Options. The following options
appear in the display:
– Erase — Erase the Memo you are viewing.
– Add New Memo — Add a new Memo to Memo Pad.
– Lock / Unlock — Prevent/allow erasure of the Memo you are viewing.
Select Erase. You are prompted to confirm the erasure.
• To erase the Memo, press Yes. To keep the Memo, press No.
Alarm Clock
Your phone has three alarm clocks that you can set to go off
once, or to recur daily at a specific time. Once set, an alarm clock
is easy to change or turn off completely.
Note: The Alarm Clock doesn’t function when the phone is turned off. If the
time for an alarm that was set for Once has elapsed while the phone is
off, the alarm occurs at the specified time on the next day.
Set an Alarm
1.
From the Tools menu, select
Alarm Clock. The following
options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Select the alarm clock that you
wish to set. The selected Set
Alarm screen appears in the display with the Alarm option
highlighted and with the current time showing above it.
3.
Use the Up/Down navigation keys to highlight the following
Set Alarm options:
• Alarm — Use the Left/Right navigation keys to select On or Off.
• Time — Populated with the current time. To change the time, use
the keypad.
– Use the Left/Right navigation keys to select AM or PM.
• Frequency — Use the Left/Right navigation keys to select Daily /
Mon.–Fri. / Weekends / Once.
• Ringer — Select Tone / Vibrate using the Left/Right navigation
keys.
Tools
98
r600.book Page 99 Thursday, May 7, 2009 4:35 PM
– To select a particular Tone, use the Up/Down navigation keys to highlight
the current Tone, then press the Left/Right navigation key. The Alert
Tone menu appears in the display. (For more information, refer to
“Ringer Type” on page 115.)
4.
When you’re finished entering the time and frequency for
the alarm, press SAVE. If the Alarm is set to On, the alarm
icon (
) appears in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display and an alert
sounds when the specified time for the alarm arrives.
• To silence the alarm, press
.
• If the alarm was set as a Daily alarm, the alarm icon remains in the top
of the display.
• If the alarm was set as a Once only alarm, the alarm icon disappears
from the top of the display.
Turn Off an Alarm
1.
2.
Options. The following options appear in the display:
• Off — Disables the highlighted Alarm and retains the current
settings.
• Reset Alarm — Disables the highlighted Alarm and resets the
Alarm settings to default values.
• Reset All — Disables all Alarms and resets all Alarm settings to
default values.
3. Select the desired option to turn the selected Alarm(s) off.
World Time
World Time lets you view the time of
day or night in any of the 24 different
time zones around the world.
Note: To use World Time, you need to
subscribe to your Wireless Carrier’s
digital service.
From the Tools menu, select Alarm Clock. The following
options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
Highlight the Alarm you wish to turn off, then press
1.
From the Tools menu, select
World Time. A world map
appears in the display.
2.
Use the Left/Right navigation keys to browse cities and
their current times.
99
r600.book Page 100 Thursday, May 7, 2009 4:35 PM
The following cities are supported.
EST: New York
EST: Montreal
EST: Boston
Caracas
Brasilia
Mid Atlantic
Cape Verde
London
Paris
Rome
Berlin
Athens
Helsinki
Jerusalem
Moscow
Baku
Abu Dhabi
Tashkent
Alma-ata
Bangkok
Jakarta
Hong Kong
Beijing
Seoul
Tokyo
Guam
Sydney
PST: Los Angeles
MST: Denver
MST: Arizona
CST: Dallas
CST: Chicago
CST: Houston
CST: Mexico City
EST: Detroit
EST:
Washington D.C
3.
Do one of the following:
• To set the selected city/time zone as the default time zone for your
phone, press
.
• To return to the Tools menu without changing the default time zone,
press
.
Enable Daylight Savings Time (DST)
1.
While viewing the World Time map, press the Options soft
key. DST Off / DST On pops-up in the display.
2.
Press
(
Okhotsk
Wellington
Samoa
Midway
Honolulu
HAST: Hawaii
AKST: Alaska
PST: Seattle
PST:
San Francisco
to accept the highlighted setting. If the DST icon
) appears in the display, it indicates that Daylight
Savings Time is enabled.
Tools
100
r600.book Page 101 Thursday, May 7, 2009 4:35 PM
Calculator
You can perform calculations,
including addition, subtraction,
multiplication and division using your
phone.
1.
From the Tools menu, select
Calculator. The Calculator
screen appears in the display.
2.
5.
screen) to set the type of calculation that you wish to
perform. Your choices are as follows.
• [ + ] Addition
• [ x ] Multiplication
• [ - ] Subtraction
• [ ÷ ] Division
6. Use the keypad to enter the second number into your
Enter the first number in your
equation using the keypad.
(Numbers can be up to 9 digits long, and can include a
decimal point followed by up to 3 more digits.)
• Press
to enter a decimal point.
• Press
to change the sign for a number to a negative.
3. Press Operator to add parentheses [( )] to your equation or
equation.
7.
101
to perform the calculation and view the result.
You can use this function to set a
stop watch.
1.
From the Tools menu, select
Stop Watch. The Stop Watch
screen appears in the display.
equivalent of 32.
Press the Clear soft key to clear current entries.
Press
Stop Watch
to enter a Power exponent (^), such as, 3^2, which is the
4.
Use the Navigation keys (as shown in the Calculator
2.
Press
to start, stop, and
resume the Stop Watch count.
r600.book Page 102 Thursday, May 7, 2009 4:35 PM
3.
Press Record at the start of each succeeding event/lap to
record the completion time for the previous event/lap. You
can record up to eight event/lap times.
4.
Press Reset to reset the Stop Watch and to erase all Stop
Watch (lap) times recorded.
Converter
The conversion menu provides the
following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
Using Converters
To convert a currency, length, weight, volume, area, or
temperature, do the following:
1.
From the Tools menu, select Converter. The following list of
converters appears in the display:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
2. Select the conversion feature you wish to use.
3.
Use the Navigation key to select the units to be converted
From and To.
4.
Enter the quantity you want converted in the From field.
The converted quantity appears in the To field.
Note: To include a decimal point, press the
key.
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes
long-term average exchange rates
as default values. To review and/or
change a default exchange rate to
the current exchange rate, do the
following:
1.
From the Tools menu, select
Converter ➔ Currency.
Tools
102
r600.book Page 103 Thursday, May 7, 2009 4:35 PM
2.
Press the Rate soft key. The Exchange Rate list appears in
the display.
3.
Press EDIT (
). The Edit Exchange Rate list appears in
the display showing U.S. Dollar (USD)-based exchange
rates.
4.
Highlight a currency whose exchange rate you wish to
Press
2.
8.
To change any other exchange rates, repeat Steps 3 – 6.
Press the Rate soft key. The
Exchange Rate list for the From currency appears in the
to save the changed exchange rate. The
display.
Exchange Rate list appears in the display.
7.
From the Tools menu, select
Converter ➔ Currency.
Use the keypad keys to change the selected U.S. Dollar
(USD)-based exchange rate value.
6.
You can use the Currency Converter
to convert from and to obscure
currencies by adding exchange rates
for these currencies. To add a
currency and its exchange rate to the
Currency Converter, do the following:
1.
change.
5.
Currency — Adding Exchange Rates
3.
Press the Add soft key. The Add Exchange Rate screen
appears in the display with the Base field highlighted.
Press the Cancel soft key to return to the Converter screen.
4.
Use the Left/Right navigation key to select the Base
currency to be converted from.
5.
Press the Down navigation key to highlight the Currency
field.
6.
Enter an identifier of up to 5 characters for the new
currency using the keypad. (For more information, refer to
“Entering Text” on page 45.)
103
r600.book Page 104 Thursday, May 7, 2009 4:35 PM
7.
Highlight the Exchange Rate field.
8.
Enter a decimal exchange rate for the new currency using
the keypad.
Note: Press the
key to enter the decimal point.
The Exchange Rate field only accepts up to five digits after the decimal
point.
9.
To add the new exchange rate to the list, press SAVE.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
1.
From the Tools menu, select Converter ➔ Currency.
2.
Press Rate. The Exchange Rate
4.
Note: The Erase soft key is undefined for preloaded Exchange Rates. This
prevents you from erasing them.
5.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Calculations are based on the total amount of the check, a
selected gratuity percentage, and the number of people paying.
1.
currency exchange rate to be
erased.
From the Tools menu, select
Tip Calculator. The Tip
Calculator screen appears in
the display with the Bill field
appears in the display.
Highlight the user-added
To erase the selected exchange rate, press Yes. To keep
the selected exchange rate, press No.
list for the From currency
3.
Press Erase. You are prompted to confirm the erasure.
highlighted.
2.
Enter the total amount of the
bill using the keypad.
Tools
104
r600.book Page 105 Thursday, May 7, 2009 4:35 PM
Note: To include a decimal point, press the
3.
key.
If needed, press the Down navigation key to highlight the
Tip field.
4.
Enter a tip percentage using the keypad.
5.
If needed, press the Down navigation key to highlight the #
Paying field.
6.
Enter the number of persons paying using the keypad.
7.
The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.
105
r600.book Page 106 Thursday, May 7, 2009 4:35 PM
Section 13: Voice Service
This section explains how to use your phone’s digital assistant
functions to view today’s calendar, schedule events, set
reminders, perform calculations, and more.
Voice Service
Your R600 includes VoiceSignal, state-of-the-art voice
recognition software that lets you use your voice to dial numbers,
access your Contacts list, and open Tools. To access your
phone’s voice recognition, do the following:
1.
From the Main menu, select Menu ➔ Voice SVC. The
following options appear in the display:
• Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. (Also see “Using Voice Dial” on page 23. Also,
see “Voice Method” on page 36. for more information.)
• Voice Settings — Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences. (For more information,
refer to “Digit Dialing” on page 108.)
2. Highlight the desired sub-menu, then press
.
Voice Commands
1.
To access the Voice Commands menu, do one of the
• In standby mode, press and hold
.
• From the Main menu, select Menu ➔ Voice SVC menu, select
Voice SVC ➔ Voice Commands.
Note: You can also set your phone to start VoiceSignal when you open the flip
or connect an optional headset to the phone. (For more information,
refer to “Voice Launch” on page 110.)
“Say a Command” appears in the display and is
pronounced through the earpiece, followed by a list of
available commands:
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if
you have hundreds of them stored on your phone. You can also dial
any telephone number, even if it is not stored in your contact list, by
saying the digits in the number. (For more information, refer to
“Using Voice Dial” on page 23.)
• Send Text — Lets you access Create Text Message.
• Send Picture — Lets you access Create Picture Message.
• Lookup — Lets you find a Contact by name and review the
Contact’s information.
following:
Voice Service
106
r600.book Page 107 Thursday, May 7, 2009 4:35 PM
• Go to — Lets you access the following list of your phone’s features
and functions:
– Calls
– Messages
– Contacts
– Multimedia
– Browser
– Next menu
• Check — Lets you say a single command (such as “Status”) to
verify your phone's: Status, Battery, Signal, Network, or My
phone #.
2. Speaking clearly, say the command that you want to use.
If VoiceSignal does not recognize a command, it prompts
you to repeat the command.
If VoiceSignal still does not recognized the command, it
tells you “No match found” and offers you the option of
selecting Settings or Repeat before canceling voice
recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
107
Voice Settings
Choice Lists
When VoiceSignal cannot recognize a name or number, it
displays a choice list of up to three possible choices, and
prompts you to confirm the correct one.
You can select how VoiceSignal will use choice lists with name
dialing, digit dialing, and contacts.
To change the way VoiceSignal uses choice lists:
1.
From the Main menu, select Menu ➔ Voice SVC menu,
select Menu ➔ Voice SVC ➔ Voice Settings ➔ Choice Lists.
2.
Highlight the Choice List behavior you prefer:
• Automatic — VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On — VoiceSignal always displays a choice list, even when
there is only one choice.
• Always Off — VoiceSignal never displays a choice list.
3. Press the OK soft key or press
to accept the new
setting. Press
to discard the new setting and return
to the Voice Settings menu.
r600.book Page 108 Thursday, May 7, 2009 4:35 PM
Sensitivity
1.
From the Main menu, select Voice SVC ➔ Voice Settings ➔
Sensitivity.
2.
Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between Reject
More spoken commands or names and Reject Less spoken
commands or names.
3.
Press the OK soft key or press
setting. Press
to accept the new
to discard the new setting and return
to the Voice Settings menu.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Tips for Adapting Digit Dialing:
• Use Adapt Digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
• Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1.
Settings ➔ Digit Dialing ➔ Adapt Digits. Your phone
displays text describing the Adapt Digits process.
2.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
From the Main menu, select Menu ➔ Voice SVC ➔ Voice
Press the OK soft key or press
. Your phone displays
the first digit sequence and “Please say” plays through the
speaker followed by the four digits appearing in the
display.
Voice Service
108
r600.book Page 109 Thursday, May 7, 2009 4:35 PM
3.
Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
• If the recording was good, say “Yes.”
• If you need to re-record, say “No.”
• If you want to exit this menu, say “Cancel.”
• If you did not understand the command say “Repeat.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4.
After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
5.
After 10 sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
6.
Repeat steps 4 and 5 for another 10 sets of digits. After the
second group of 10 sets of digits, “Adaptation complete”
plays through the speaker and you are returned to the Digit
Dialing menu.
109
Reset Digits
To reset digit dialing to factory default settings, do the following:
1.
From the Main menu, select Menu ➔ Voice SVC ➔ Voice
Settings ➔ Digit Dialing ➔ Reset Digits. The phone prompts
you to confirm digit reset.
2.
Press the OK soft key or press
to reset your digit
adaptation, or press the Back soft key or press
to
cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1.
From the Main menu, select Menu ➔ Voice SVC ➔ Voice
Settings ➔ Sound. The following options appear in the
display:
•
•
•
•
Prompts — On/Off — Enables or disables audio prompts.
Digits — On/Off — Enables or disables digit playback.
Names — On/Off — Enables or disables name playback.
Name Settings — Lets you adjust the Speed (Faster or Slower)
and Volume (Louder or Softer) of your phone’s audio name
playback.
2. Select the desired option.
r600.book Page 110 Thursday, May 7, 2009 4:35 PM
3.
4.
About
Highlight the desired setting.
Press the OK soft key or
Press
to accept the new setting.
to discard the new setting and return to the
Voice Settings menu.
䊳
Voice Launch
From the Main menu, select Voice SVC ➔ Voice Settings ➔
About.
To set the key or action that launches VoiceSignal, do the
following:
1.
This option causes the About VoiceSignal screen to appear in the
display, showing version and build information about the
VoiceSignal software included on your phone.
From the Main menu, select Menu ➔ Voice SVC ➔ Voice
Settings ➔ Voice Launch. The following options appear in
The About VoiceSignal screen appears in the display
showing the version level of the VoiceSignal software
currently installed on your phone.
the display:
• Key Only — Press and hold
to activate VoiceSignal for one
call.
• Key/EarMic — Attach a headset to your phone. Press and hold
or press and hold the button on the headset to activate
VoiceSignal.
• Key/Flip — Open the flip or press and hold
to activate
VoiceSignal.
2. Highlight the option you want.
3.
Press the OK soft key or press
setting. Press
to accept the new
to discard the new setting and return
to the Voice Settings menu.
Voice Service
110
r600.book Page 111 Thursday, May 7, 2009 4:35 PM
Section 14: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
Settings Menu
䊳
To access the Settings menu, press Menu (
), then select
Settings. The Settings menu appears in the display.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Note: Contact your Wireless Carrier to determine whether, when, or where
location-based services are available.
1.
From the Settings menu, select Location. The following
options appear in the display:
• Location On — GPS location setting is on whenever you make or
receive a call, wherever the feature is available.
• 911 Only — GPS location setting is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
111
Display Settings
Using the Display menu, you can set the standby mode
animation, customize the backlight settings, and more.
1.
From the Settings menu, select Display Settings. The
following options appear in the display:
• Wallpaper — Lets you choose the picture(s) that display(s) on your
phone when in standby mode.
• Clock Format — Lets you choose whether to show the time in the
display in digital or analog format.
• Theme — Lets you select the main menu color scheme.
• Dialing Font Size — Lets you choose how the number will display
on the display screen.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in standby mode.
• Backlight — Lets you set backlight options for the LCDs, keypad,
and set the brightness.
• Front Contrast — Lets you set the contrast for your phone’s front
display.
2. Select the desired sub-menu. The following sections
describe the Display sub-menus in greater detail.
r600.book Page 112 Thursday, May 7, 2009 4:35 PM
Wallpaper
Wallpaper lets you choose the pictures that appear in your
phone’s displays while in standby mode.
1.
From the Settings menu, select Display Settings ➔
Wallpaper. The following options appear in the display:
• Main Screen
• Front Screen
Note: When you select Front Screen, your Wallpaper selection automatically
changes the Clock Format setting for the Front Clock to Off.
2.
Select the Main Screen, and the following options appear
in the display:
• My Images — Choose a picture to appear in the display when the
phone is in standby mode.
• My Videos — Choose a video to appear in the display when the
phone is in standby mode.
• Preset Images — Choose a preset image to appear in the display
when the phone is in standby mode.
3. Select the Front Screen and the following options appear in
the display.
• For My Images and Preset Images up to four pictures or images
appear in the display.
4.
Select a picture or image to display when the phone is in
standby mode.
Clock Format
Clock Format lets you choose whether to show the time in the
display in digital or analog format. You can set both the Main
Clock and the Front Clock.
1.
From the Settings menu, select Display Settings ➔ Clock
Format.
2.
Select Main Clock or Front Clock. The Digital option will be
displayed. Scroll to the right to see the following options:
• Digital — The current time appears as large numbers on the
second line from the top of the display (Main Clock) or in the center
of the display (Front Clock).
• Analog — The current time appears as sweep hand positions on a
clock image. Individual hours appear as Roman numerals (I – XII).
• Off — The current time appears as small numbers on the second
line from the bottom of the display (Main Clock) or in the center of
the display with the Front Screen Wallpaper in the background.
Note: The Clock Format setting for the Front Clock automatically changes to
Off when you change the Wallpaper setting for the Front Screen. (For
more information, refer to “Wallpaper” on page 112.)
Changing Your Settings
112
r600.book Page 113 Thursday, May 7, 2009 4:35 PM
3.
Highlight the desired setting, then press
to save the
Font Size.
setting.
Theme
Theme lets you select the color scheme your phone uses to
highlight menu items and scroll bar positions.
1.
From the Settings menu, select Display Settings ➔
Theme. The following options appear in the display:
The following options appear in the display:
• Normal
• Large
2. Select the desired dialing font size value.
Banner
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
1.
From the Settings menu, select Display Settings ➔
Banner. The Banner text entry screen appears in the
display.
Note: If necessary, press and hold
2.
Select the desired theme. You are returned to the Display
2.
Settings menu, now showing the selected theme.
1.
113
From the Settings menu, select Display Settings ➔ Dialing
Enter a word or short phrase (up to 18 characters) to
appear in your phone’s display while in standby mode. (For
Dialing Font Size
Dialing Font Size adjusts the size of the numbers that appear in
the dialing screen when you dial more than 10 digits. This lets
you see as many of the digits you’ve dialed as possible.
to erase an existing banner.
more information, refer to “Entering Text” on page 45.)
3.
Press
to save the new banner.
r600.book Page 114 Thursday, May 7, 2009 4:35 PM
Backlight
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Front Contrast
Set the Front (Sub) LCD contrast to your preference.
1.
Contrast. The Front Contrast screen appears in the display.
Note: Prolonged backlight use drains your battery faster.
2.
1.
At the Settings menu, select Display Settings ➔ Front
Use the Left and Right navigation keys to adjust the
From the Settings menu, select Display Settings ➔
contrast for the Front Display. The results of your
Backlight. The following sub-menus appear in the display:
adjustments appear in the display.
• Main Display — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 7,
15, and 30 Seconds and Always On (this setting uses much more
power than the timed settings) and Always Off.
• Keypad — Sets the amount of time the main display backlight
remains on with the phone idle. Optional settings are 7, 15, and 30
Seconds and Always On (this setting uses much more power than
the timed settings) and Always Off.
• Brightness — Use the Left and Right soft keys to select between
any of 5 optional settings.
• Charging Light — Sets the backlight to On or Off while a charger
is connected to the phone.
2. Select a Backlight option a setting for the option.
3.
Press
to save your new contrast setting.
Sounds Settings
The Sounds Settings menu provides a variety of options to
customize audio properties for such things as ringers, keypad
tones alerts, and more.
Volume
You can set the volume setting on your phone. This setting if for
all sounds other than the ring tones.
1.
From the Settings menu, select Sounds Settings ➔
Volume.
Options are:
• Voice Calls
• Messages
Changing Your Settings
114
r600.book Page 115 Thursday, May 7, 2009 4:35 PM
• Alarms
:
2.
• Vibrate
• Medium/High
• Low
• High
• Low/Medium
• Vibrate/High
• Medium
• Ringer Off
Use the Left and Right navigation keys to select the setting
you wish. When you are satisfied with the setting, press
SET (
). Your phone returns to the Sounds Settings
menu.
Ringer Type
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
1.
From the Settings menu, select Sounds Settings ➔ Ringer
Type.
• Messages — Lets you set which ringtone or sound file plays when
you receive a Text Message, Picture/Video Message, and/or
Voicemail message.
• Roam Ringer — Lets you set which ringtone or sound file plays
when the phone is roaming.
2. Select the desired sub-menu. The following sub-menu
options appear in the display:
• For Voice Calls, the following options appear in the display:
– My Ringtones
– My Sounds
• For Messages, the following options appear in the display:
– Text Message
– Picture/Video Message
– Voicemail
• For Roam Ringer, the following options appear in the display:
– My Ringtones
– My Sounds
3. Select the desired sub-menu option, then select the
The following options appear in the display:
• Voice Calls — Lets you set which ringtone, sound file, and/or one
of a set of ringtones and/or sound files plays when you receive a
voice call.
115
desired ringer.
Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
r600.book Page 116 Thursday, May 7, 2009 4:35 PM
1.
From the Settings menu, select Sounds Settings ➔ Alerts.
– Use the Volume keys or Navigation key to set the keypad tones volume.
– Press
to save your setting and return to the Key Tone submenu.
The following Alerts options appear in the display:
• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
• Roaming — Sounds an alert when you leave your home service
area during a call.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On/Off — Plays a melody when the phone is being turned
on or off.
2. Select the desired Alert option.
3.
Select the desired value for the selected Alert.
• For Tone Length, do the following:
– Highlight Normal or Long.
– Press
to save your setting and return to the Key Tone submenu.
Call Settings
Call Answer
You can select a specific answer mode when you receive an
incoming call.
1.
Answer.
Key Tone
The following call answer settings appear in the display:
Key Tone lets you adjust the volume level and length of tone that
the keypad generates each time you press a key.
1.
• Any Key — Press any key except the
or Left soft key to
answer an incoming call.
• Talk Key — Press
to answer an incoming call.
• Flip Open — Open the flip or press
to answer an incoming
call.
From the Settings menu, select Sounds Settings ➔ Key
Tone. The following sub-menus appear in the display:
• Tone Level (volume)
• Tone Length
2. Select the desired Key Tone sub-menu.
From the Settings menu, select Call Settings ➔ Call
Tip: You can set your phone to answer calls automatically, without any input
from you. (For more information, refer to “Auto Answer” on page 117.)
• For Tone Level, do the following:
2.
Select the desired call answering method.
Changing Your Settings
116
r600.book Page 117 Thursday, May 7, 2009 4:35 PM
Call Alert
1.
From the Settings menu, select Call Settings ➔ Call Alert.
The following Call Alert settings appear in the display:
• Ring Only — Phone rings for an incoming call.
• Caller ID + Ring — Phone rings and the display shows caller ID for
an incoming call.
• Name Repeat — Phone repeats displaying Contact name or caller
ID.
2. Select the desired call alerting method.
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
1.
From the Settings menu, select Call Settings ➔ Auto
Answer. The following settings appear in the display:
• Off — Disables automatic answering of calls
• After 1 Second — Phone automatically answers calls after 1
second
• After 3 Seconds — Phone automatically answers calls after 3
seconds
• After 5 Seconds — Phone automatically answers calls after 5
seconds
2. Select the desired call automatic answering method.
117
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1.
From the Settings menu, select Call Settings ➔ Auto
Retry. The following settings appear in the display:
• Off — Disables automatic re-dialing of numbers
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds
2. Select the desired call automatic retrying method.
TTY Mode
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the power/accessory connector on the left side of
the phone. TTY Mode must be enabled before you can use your
phone with a TTY device.
r600.book Page 118 Thursday, May 7, 2009 4:35 PM
1.
From the Settings menu, select Call Settings ➔ TTY Mode.
You are prompted to confirm you want to change the
current TTY Mode setting.
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
1.
Note: The “Enabling TTY may impair headset use and non-TTY accessory
performance” message pops up when you select TTY Mode.
2.
To access the TTY Mode settings, press the Yes soft key. To
return to the Call Settings sub-menu, press the No soft key.
3.
If you press the Yes soft key, the following settings appear
in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• TTY+Talk — Enables TTY mode and microphone.
• TTY+Hear — Enables TTY mode and earpiece.
• TTY Off — Disables TTY mode.
4. Select the desired TTY Mode.
Note: The TTY icon (
) appears in the top of the display when the phone is
in standby mode.
From the Settings menu, select Call Settings ➔ Voice
Privacy. The following settings appear in the display:
• Standard — Voice privacy is disabled
• Enhanced — Voice privacy is enabled
2. Select the desired Voice Privacy setting.
Data Settings
Use the Data Settings menu to configure data connection
settings.
1.
From the Settings menu, select Call Settings ➔ Data
Settings. The following settings appear in the display:
• Data Off — No incoming data calls accepted.
• Data For Next Call — Wait for data call for the next 10 minutes.
• Data Until Powered Off — Data calls only, no voice calls accepted,
until you power the phone off and on again.
2. Select the desired data call connection setting.
Changing Your Settings
118
r600.book Page 119 Thursday, May 7, 2009 4:35 PM
Phone Settings
Airplane Mode
When set to On, Airplane Mode disables all radio functions of your
phone. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as
the camera and the Tools) safely in sensitive environments, such
as on board an aircraft.
1.
From the Settings menu, select Phone Settings ➔
Airplane Mode.The following settings appear in the display:
• On — Disables the radio transmitter and receiver in your phone
• Off — Enables the radio transmitter and receiver in your phone
2. Select the desired Airplane Mode setting.
Security
Use the Security menu to lock your phone, set up emergency
numbers, set restrictions, as well as other security options.
Lock Phone
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
1.
Security. You’re prompted to enter the lock code.
Language
The language option on your phone can change the language of
voice prompts, menus, and key-input.
1.
From the Settings menu, select Phone Settings ➔
Language. The following settings appear in the display:
• English
• Spanish
2. Select the desired Language setting.
119
From the Settings menu, select Phone Settings ➔
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Lock Phone. The following
phone Lock mode settings appear in the display:
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
• Unlock — Unlocks the phone.
• On Power Up — The phone locks automatically the next time your
phone is powered ON (The phone stays locked until you enter the
lock code.)
r600.book Page 120 Thursday, May 7, 2009 4:35 PM
3.
Select the desired phone Lock mode setting.
Tip: You can manually lock your phone by pressing and holding
more information, refer to “Lock Mode” on page 16.)
. (For
Change Lock Code
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1.
From the Settings menu, select Phone Settings ➔
Note: Your phone does not allow you to view the Lock Code for obvious
security reasons. If you change the Lock Code, be sure to write down
or memorize the new code.
Emergency #
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Change Lock Code. You’re
prompted to enter the new lock code.
3.
Enter the new lock code. You’re prompted to re-enter the
new lock code for verification.
4.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Enter the new lock code again. Your new Lock Code is
stored.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Changing Your Settings
120
r600.book Page 121 Thursday, May 7, 2009 4:35 PM
Store Emergency Numbers
1.
2.
From the Settings menu, select Phone Settings ➔
prompted to confirm that you want to restore default
Security. You’re prompted to enter the lock code.
settings (except for the Contacts and Voice Dial).
• To return to the Security sub-menu without resetting the phone,
press the No soft key.
• To restore default settings, press the Yes soft key.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Emergency #.
3.
Select from the three emergency number entries.
4.
Enter an emergency number (up to 32 digits in length).
5.
Press
to save the number that you entered.
Call Emergency Numbers in Lock Mode
1.
In standby mode, enter the emergency number.
2.
Press
to place the call.
Reset Phone
Reset Phone returns all Settings to their factory default values.
1.
Erase All Contacts
Erase memory erases your Contacts and Group information
(except Default). This feature is useful if you want to give your
phone to someone else.
1.
From the Settings menu, select Phone Settings ➔
Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Erase All Contacts. You are
prompted to confirm erasure of all Contacts entries.
From the Settings menu, select Phone Settings ➔
Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
121
Enter the lock code, then select Reset Phone. You are
Note: This procedure does not delete your Photo Gallery. The Photo Gallery
needs to be deleted separately.
r600.book Page 122 Thursday, May 7, 2009 4:35 PM
3.
To erase all entries, press the Yes soft key. To keep the
current entries and return to the Security sub-menu, press
the No soft key.
Restrictions
Restrictions lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed from your Contacts.
1.
From the Settings menu, select Phone Settings ➔
Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
NAM Selection
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
1.
From the Settings menu, select Phone Settings ➔ NAM
Selection. The following options appear in the display:
• NAM1 — Your service contract has one phone line.
• NAM2 — Your service contract has two phone lines.
2. Select the desired NAM setting. The phone powers itself
off and back on.
2.
Enter the lock code, then select Restrictions.
3.
Select Outgoing Calls or Incoming Calls. The following
options appear in the display:
• Allow All — No restriction on selected calls.
• Allow None — Restrict (block) all selected calls.
• Allow Contacts — Restrict selected calls from/to numbers not in
your Contacts list.
4. Select the desired call Restrictions setting.
System Select
The System Select menu allows you to select the roaming setting
for your phone.
1.
From the Settings menu, select Phone Settings ➔ System
Select.
The following roaming options appear in the display:
• Home only — Your phone is available for normal operation only
within your designated coverage area.
• Automatic — Your Wireless Carrier’s Preferred Roaming List (PRL)
of networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Changing Your Settings
122
r600.book Page 123 Thursday, May 7, 2009 4:35 PM
2.
– Use the Left and Right navigation keys to select AM, PM, or 24 Hours.
– Press
to save the your time setting.
Select desired roaming option.
Set Time
Use the Set Time option to set the current date and time.
Quick Search
Quick Search is an easy way to locate Menu items and Contacts.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
With Airplane Mode set to On, this function is enabled. In digital service
mode, setting Airplane Mode to Off also disables Set Time. (For more
information, refer to “Airplane Mode” on page 119.)
1.
From the Settings menu, select Phone Settings ➔ Set
Time. The following options appear in the display:
• Set Date
• Set Time
2. Select the desired option.
• For Set Date, the Set Date screen appears in the display.
– Enter the current date using your keypad.
The month and day must be entered using two digits each. The year
must be entered using all four digits.
– Press
to save your date setting.
• For Set Time, the Set Time screen appears in the display.
– Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12/
24-hour format.
123
1.
From the Settings menu, select Phone Settings ➔ Quick
Search. The following options appear in the display:
• On — Quick Search is enabled.
• Off — Quick Search is disabled.
2. Select the desired Quick Search setting.
Searching for a Menu Item
1.
In standby mode, press the first few numeric keys that
correspond to the letters of the menu item name.
For example, to search for
“Inbox” you could enter:
I
2.
N
B
Press the Down navigation
key. The Menu List screen
appears in the display with
r600.book Page 124 Thursday, May 7, 2009 4:35 PM
the first menu item matching your entry highlighted.
3.
Select the desired menu item.
3.
Select the desired Contact and press
to call the
contact.
PC Connection
Tip: If the menu item you are searching for does not appear in the Menu List
screen, try expanding your search by pressing the
key to delete
the last digit of your entry.
Searching for a Contact
1.
In standby mode, press the first few numeric keys that
correspond to the letters of the Contact name.
For example, to search for
“Sally” you could enter:
S
2.
A
This menu selects the method of communication for the USB
port, the options include:
• USB Mass storage: allows you to use the onboard storage capacity of
the phone to store and upload files. This option allows your computer
to detect the phone as a removable storage drive.
• USB Modem: allows you to use the phone as a wireless modem for
communication between a computer and the Internet.
Note: You are unable to connect to PC Studio when the Mass Storage option
is selected.
L
Press the Up navigation key.
The Find screen appears in
the display with the first
Contact name matching
your entry highlighted.
Changing Your Settings
124
r600.book Page 125 Thursday, May 7, 2009 4:35 PM
Memory Info
Shortcut Key
You can program the Shortcut Key and use it as a shortcut to your
favorite application(s).
1.
From the Settings menu, select Phone Settings ➔
Shortcut key.
Memory Info lets you quickly and easily review and manage your
phone memory usage. To access Memory Info, do the following:
䊳
From the Settings menu, select Memory Info. The following
options appear in the display:
2.
Select Up Key, Right Key, Down Key, or Left key.
3.
Highlight one of the following and press
to assign the
shortcut to the key:
• Brew
• My Images
• Calculator
• Browser
• My Ringtones
• Stop Watch
• New Text Msg
• My Sounds
• Voice
Recording
• Save Options — Lets you specify whether your images and videos
will be stored in your phone or on an optional Memory Card.
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
Save Options
Lets you specify where you want your images and videos stored.
To access Save Options, do the following:
• New Pic Msg
• My Videos
• Camera
• Inbox
• Calendar
• Converter
Options. The following file type options appear in the
• Contacts
• Memo Pad
• Tip Calculator
display:
• Recent Calls
• Alarm Clock
• Voice Command
• World Time
1.
From the Settings menu, select Memory Info ➔ Save
• Images
• Videos
2. Select the desired file type. The following storage options
appear in the display:
125
r600.book Page 126 Thursday, May 7, 2009 4:35 PM
• Phone Memory — saves the selected type of files in your phone’s
memory.
• Card Memory — saves the selected type of files in a removable
microSD memory card.
3. Select the desired storage location. “Images/Videos set”
appears in the display, and you are returned to the Save
Options menu.
Phone Memory
Lets you review your phone’s available memory and manage your
files stored there.
Memory Usage
Memory Usage lets you review your usage of your phone’s
memory.
1.
From the Settings menu, select Memory Info ➔ Phone
Memory ➔ Memory Usage. The Memory Usage screen
appears in the display showing the following information:
•
•
•
•
•
Total Used memory usage
Available unused memory
My Images memory usage
My Videos memory usage
My Ringtones memory usage
• My Sounds memory usage
• Applications memory usage
• Pic/Video Msg memory usage
2. Press
to return to the Phone Memory menu.
Freeing Memory
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
1.
From the Settings menu, select Memory Info ➔ Phone
Memory. The Phone Memory screen appears in the display
listing the following options:
• Memory Usage
• My Images
• My Videos
• My Ringtones
• My Sounds
2. Select the desired sub-menu. A list of all files in the related
folder appears in the display.
Files are listed by name, and each file entry shows the
name and size of each file.
Changing Your Settings
126
r600.book Page 127 Thursday, May 7, 2009 4:35 PM
3.
To erase files, do the following:
• Press the Options soft key. The following options appear in the
display:
– Erase
– Move
• Select Erase.
• Highlight a file you want to erase, then press
to mark the file
for erasure. (Press the Mark All soft key to mark all files for
erasure.)
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files or press the No soft
key to return to the Erase screen.
4. To move files to the Memory Card, do the following:
• Press the Options soft key. The following options appear in the
display:
– Erase
– Move
• Select Move
• Highlight a file you want to move, then press
to mark the file
for moving. (Press the Mark All soft key to mark all files for
moving.)
• Press the Done soft key. You are prompted to confirm moving the
selected file(s) to the Memory Card.
127
• Press the Yes soft key to move all marked files or press the No soft
key to return to the Move screen.
5. Press
to return to the My Images / Videos / Ringtones
/ Sounds sub-menu. Press
to return to standby
mode.
Card Memory
Card Memory lets you review a removable, microSD Memory
Card’s available memory, manage your files stored there, and
format new microSD Memory Cards.
Memory Usage
Memory Usage lets you review your usage of your Memory Card.
1.
From the Settings menu, select Memory Info ➔ Card
Memory ➔ Memory Usage. The Memory Usage screen
appears in the display showing the following information:
• Total Used memory usage
• Available unused memory
• My Images memory usage
• My Videos memory usage
• My Music memory usage
2. Press
to return to the Card Memory menu.
r600.book Page 128 Thursday, May 7, 2009 4:35 PM
Freeing Memory
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
1.
From the Settings menu, select Memory Info ➔ Card
Memory. The Card Memory screen appears in the display
listing the following options:
• Memory Usage
• My Images
• My Videos
• My Music
• Format Card
2. Select the desired sub-menu. A list of all files in the related
folder appears in the display.
Files are listed by name, and each file entry shows the
name and size of each file.
• Select Erase.
• Highlight a file you want to erase, then press
to mark the file
for erasure. (Press the Mark All soft key to mark all files for
erasure.)
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files or press the No soft
key to return to the Erase screen.
4. To erase Music files, do the following:
• Press the Erase soft key.
• Highlight a Music file you want to erase, then press
to mark
the file for erasure. (Press the Mark All soft key to mark all Music
files for erasure.)
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files or press the No soft
key to return to the Erase screen.
5. To move image and video files to the phone, do the
following:
3.
To erase Image and Video files, do the following:
• Press the Options soft key. The following options appear in the
display:
– Erase
– Move
• Press the Options soft key. The following options appear in the
display:
– Erase
– Move
• Select Move.
Changing Your Settings
128
r600.book Page 129 Thursday, May 7, 2009 4:35 PM
• Highlight a file you want to move, then press
to mark the file
for moving. (Press the Mark All soft key to mark all files for
moving.)
• Press the Done soft key. You are prompted to confirm moving the
selected file(s) to the phone.
• Press the Yes soft key to move all marked files or press the No soft
key to return to the Move screen.
6. Press
to return to the My Images / Videos / Music /
Format Card sub-menu. Press
Phone Info lets you identify the hardware and software versions
of your phone and to identify the phone number assigned to your
phone.
Accessing Your Phone’s Information
To launch the Phone Info menu:
1.
to return to standby
mode.
Formatting a Memory Card
Formatting a microSD Memory Card erases any data currently on
the card and creates multimedia directories compatible with your
phone. To format a Memory Card, do the following:
1.
Phone Info
From the Settings menu, select Memory Info ➔ Card
The Phone Info menu appears in the display.
Phone Number
The Phone Number option lets you review the ten-digit number
assigned to your phone by your Wireless Carrier and other
information useful when contacting Customer Service.
1.
following information:
formatting of the Memory Card.
Press the Yes soft key to format the Memory Card or press
the No soft key to return to the Card Memory screen.
129
From the Phone Info menu, select Phone Number. The
Phone number screen appears in the display listing the
Memory ➔ Format Card. You are prompted to confirm
2.
From the Settings menu, select ➔ Phone Info.
2.
• Phone Number assigned by your Wireless Carrier.
Press
to return to the Phone Info menu.
r600.book Page 130 Thursday, May 7, 2009 4:35 PM
Icon Glossary
This option causes the Icon Glossary list to appear showing the
icons that can appear in the display and the names of the icons.
1.
From the Phone Info menu, select Icon Glossary. A list of
the icons that can appear on the top line of the display
appears in the display.
2.
Press
to return to the Phone Info menu.
Version
You can view the hardware and software version information for
your phone. This feature is helpful if you need to contact
Customer Service.
1.
From the Phone Info menu, select Version. The following
information appears in the display:
• S/W (Software) version
• PRL (Preferred Roaming List) identifier
• ERI (Extended Roaming Indicator)
• Browser version
• Brew version
• H/W (Hardware) version
2. Press
to return to the Phone Info menu.
Changing Your Settings
130
r600.book Page 131 Thursday, May 7, 2009 4:35 PM
Section 15: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
131
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
r600.book Page 132 Thursday, May 7, 2009 4:35 PM
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
• Head: 1.07 W/Kg.
• Body-worn: 0.974 W/Kg.
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: https://fun.samsungmobileusa.com/recycling/index.jsp for more
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Health and Safety Information
132
r600.book Page 133 Thursday, May 7, 2009 4:35 PM
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
133
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
r600.book Page 134 Thursday, May 7, 2009 4:35 PM
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
Health and Safety Information
134
r600.book Page 135 Thursday, May 7, 2009 4:35 PM
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
135
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
r600.book Page 136 Thursday, May 7, 2009 4:35 PM
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
Health and Safety Information
136
r600.book Page 137 Thursday, May 7, 2009 4:35 PM
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
137
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
r600.book Page 138 Thursday, May 7, 2009 4:35 PM
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/9/2008):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• Health Protection Agency:
http://www.hpa.org.uk/radiation
• US Food and Drug Administration:
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2.
When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
Health and Safety Information
138
r600.book Page 139 Thursday, May 7, 2009 4:35 PM
3.
Position your wireless phone within easy reach. Be able to
7.
may be distracting. Make people you are talking with
from the road. If you get an incoming call at an
aware you are driving and suspend conversations that
inconvenient time, let your voice mail answer it for you.
4.
Let the person you are speaking with know you are driving;
have the potential to divert your attention from the road.
8.
if necessary, suspend the call in heavy traffic or hazardous
traffic can be hazardous.
or medical emergencies.
9.
Use your wireless phone to help others in emergencies. If
Do not take notes or look up phone numbers while driving.
you see an auto accident, crime in progress or other
Jotting down a "to do" list or flipping through your address
serious emergency where lives are in danger, call 9-1-1 or
book takes attention away from your primary
other local emergency number, as you would want others
responsibility, driving safely.
6.
Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
weather conditions. Rain, sleet, snow, ice and even heavy
5.
Do not engage in stressful or emotional conversations that
access your wireless phone without removing your eyes
Dial sensibly and assess the traffic; if possible, place calls
to do for you.
10. Call roadside assistance or a special non-emergency
when you are not moving or before pulling into traffic. Try
wireless assistance number when necessary. If you see a
to plan calls when your car will be stationary. If you need to
broken-down vehicle posing no serious hazard, a broken
make a call while moving, dial only a few numbers, check
traffic signal, a minor traffic accident where no one
the road and your mirrors, then continue.
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
139
r600.book Page 140 Thursday, May 7, 2009 4:35 PM
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
You should follow some commonsense recommendations when
using any portable audio device:
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Health and Safety Information
140
r600.book Page 141 Thursday, May 7, 2009 4:35 PM
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
141
National Institute on Deafness and Other Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Internet: http://www.nidcd.nih.gov/
r600.book Page 142 Thursday, May 7, 2009 4:35 PM
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Internet: http://www.cdc.gov
1-888-232-6348 TTY
Internet: http://www.cdc.gov/niosh/topics/noise/
default.html
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
Health and Safety Information
142
r600.book Page 143 Thursday, May 7, 2009 4:35 PM
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
143
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
r600.book Page 144 Thursday, May 7, 2009 4:35 PM
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
is considered acceptable for normal use. A sum of 6 is
considered for best use.
M3
+
M2
=
5
T3
+
T2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
Health and Safety Information
144
r600.book Page 145 Thursday, May 7, 2009 4:35 PM
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
145
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
r600.book Page 146 Thursday, May 7, 2009 4:35 PM
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Quincy, Massachusetts
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Health and Safety Information
146
r600.book Page 147 Thursday, May 7, 2009 4:35 PM
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
147
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to the “Disabling Bluetooth or WLAN” section.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
r600.book Page 148 Thursday, May 7, 2009 4:35 PM
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
Health and Safety Information
148
r600.book Page 149 Thursday, May 7, 2009 4:35 PM
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
149
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
r600.book Page 150 Thursday, May 7, 2009 4:35 PM
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Health and Safety Information
150
r600.book Page 151 Thursday, May 7, 2009 4:35 PM
Section 16: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
151
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
r600.book Page 152 Thursday, May 7, 2009 4:35 PM
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
Warranty Information
152
r600.book Page 153 Thursday, May 7, 2009 4:35 PM
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
153
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
r600.book Page 154 Thursday, May 7, 2009 4:35 PM
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
Warranty Information
154
r600.book Page 155 Thursday, May 7, 2009 4:35 PM
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
155
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
r600.book Page 156 Thursday, May 7, 2009 4:35 PM
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
Warranty Information
156
r600.book Page 157 Thursday, May 7, 2009 4:35 PM
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
157
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2009 Samsung Telecommunications America. All rights
reserved.
r600.book Page 158 Thursday, May 7, 2009 4:35 PM
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
158
r600.book Page 159 Thursday, May 7, 2009 4:35 PM
Index
A
Accessing Your Phone’s Information
129
Accessing Your Phone’s Tools 92
Airplane Mode 119
Alarm Clock 98
Set an Alarm 98
Turn Off the Alarm 99
When an Alarm Sounds 99
Apps
Buying 66
Disabled 66
Expired 67
Removing 66
Restoring 67
Auto Scroll 62
Auto View 62
B
Battery
Charging 5
Low Battery Indicator 5
Removal 6
Travel Adapter 5
159
Bluetooth
Add New Device 93
Registered List 93
Settings 94
Turn On/Off 92
Brew
Applications Shopping and
Downloading 65
Launching 65
On-line Help 66
Settings 65
Browser
How the Browser Keys Work 64
Launching 63
Using Links 64
C
Calculator 101
Calendar 95
Call Functions
Adjusting the Call Volume 26
Answering a Call 25
Call Log 26
Making a Call — Number Entry
Dialing 21
Making a Call — Speed Dialing 22
Making a Call — Voice Dialing 23
Call Settings
Auto Answer 117
Auto Retry 117
Call Alert 117
Call Answer 116
Data Settings 118
Camcorder
Color Effects 79
Options 77
Screen Icons 72
Taking Videos 68
Camcorder mode 18
Camera
Brightness 80
Options 73
Photo Gallery 80
Save Pictures 72
Screen Icons 71
Taking Pictures 68
r600.book Page 160 Thursday, May 7, 2009 4:35 PM
Zoom 80
Camera mode 18
Camera Options
Color Effects 76
Night Shot 74
Resolution 74
Self Timer 75
Card Memory
Formatting 129
Management 127
Contacts List
Open 33
Converters 102
Creating and Sending New Messages
Picture (Pic) Message 50
Text Message 49
Video Message 53
D
Display Settings
Backlight 114
Banner 113
Clock Format 112
Dialing Font Size 113
Front Contrast 114
Theme Color 113
Wallpaper 112
H
E
Emergency Calls 21
Entering Text
Alpha (Abc) Mode 45 46
Entering Numbers 48
Entering Symbols 48
Entering Upper and Lower Case
Letters 47
Text Entry Modes 45
Erase voice memos 91
Exit Web 63
,
F
File Save Options 125
Formatting a Memory Card 129
Formatting a microSD Card 129
,
G
Gallery 70 72
Gallery, photo 80
Getting Started
Activating Your Phone 6
Understanding this User Manual 4
Voicemail 7
HAC 143
Health and Safety Information 131
I
Icon Glossary 130
In-Use Menu 19
K
Key Tone 116
L
Language 119
Lock Mode 16
M
Making a Call
Number Entry Dialing 21
Quick Search Dialing 23
Speed Dialing 22
Voice Dialing 23
Making a Call — Quick Search Dialing
23
Memo Pad 97
Memory Card
Formatting 129
Installing 8
Removing 8
160
r600.book Page 161 Thursday, May 7, 2009 4:35 PM
Menu Navigation
In-Use Options 19
Keypad Shortcuts 20
Quick Search 20
Return to Previous Menu 19
Message Folders
Drafts folder 59
Inbox 57
Messages and Lock Mode 58
Outbox 58
Voicemail 60
Message Send Options 55
Message Setting 61
Message Settings
General 61
Picture 62
Text 62
Messaging
Erasing Messages 61
Message Settings 61
microSD
Formatting 129
Installing 8
Removing 8
161
Mode
Camcorder 18
Camera 18
M-Ratings 143
Multimedia 83
Phone Memory
Freeing 126
Freeing Card Memory 128
Usage Info 126 127
Phone Number 129
Phone Safety 142
Phone Settings
Airplane Mode 119
Language 119
NAM selection 122
Quick Search 123 124
Set Time 123
System Select 122
Photos
Sending 81
Picture (Pic) Message 50
Picture Messages
Send in Camera Mode 51
,
N
NAM selection 122
Navigation key shortcuts 19
Notes and tips 4
Notes, description 4
Number Entry Dialing 21
P
Personal Organizer
Voice Memo 90
Phone
Command Keys 12
Display Screen 14
Display Screen Icons 14
Features 10
Modes 15
View, Open, Front 11
View,Closed 10
Phone Info Menu
Accessing 129
,
Q
Quick Search
Making a Call 23
Menu Navigation 20
PC Connection 124
Searching for a Contact 124
Searching for a Menu Item 123
r600.book Page 162 Thursday, May 7, 2009 4:35 PM
Setup 123
Shortcut Key 125
R
Receiving New Messages 56
While in a Call 56
Record memos 90
Reset Settings 77 80
Return to Previous Menu 19
Ringer Volume Setting 17
Roaming 31
,
S
SAR values 131
Save pictures 72
Screen Layouts 70
Searching
For a Contact 124
For a Menu Item 123
Security Settings
Change Lock 120
Emergency # 120
Erase Contacts 121
Lock Phone 119
Resetting Your Phone 121
Restriction 122
Set Time 123
Settings
Call Settings 116
Display 111
Phone 119
Security 119
Sound 114
Setup
Location 111
Voicemail 57
Silent Mode 16
Sound Settings
Alerts 115
Key Tone 116
Ringer Type 115
Volume 114
Speed Dialing 22
One-Touch Dialing 22
Three Touch Dialing 22
Two-Touch Dialing 22
Standard Limited Warranty
151
Standby Mode 16
Stop Watch 101
T
Taking pictures and videos 68
Text Conventions 4
Text message 49
Text Message Settings
Auto Scroll 62
Auto View 62
Tip Calculator 104
Tip, description 4
Tools
Alarm Clock 98
Bluetooth 92
Calculator 101
Calendar 95
Converter 102
Memo Pad 97
Stop Watch 101
Tip Calculator 104
World Time 99
Tools Menu
Accessing 92
162
r600.book Page 163 Thursday, May 7, 2009 4:35 PM
T-Ratings 143
TTY Mode 117
U
UL Certification 132
Understanding Your Contacts
Adding a New Contact Entry 33
Deleting a Contact Entry 44
Editing an Existing Contact Entry 39
Finding a Contact Entry 36
Memory 44
Pauses 39
V
Version 130
Video Message 53
Voice Dialing 23
Voice Memo 90
Erase all memos 91
Record memos 90
Review memos 90
Voice Service
Adapt Digits 108
Command Tips 107
Commands 106
Making a Call 23
163
Settings 107
Sound 109
Voicemail
Checking 57
Listening To 8
Setup 57
VoiceSignal
Voice Memos 90
W
Wallpaper 112
Warranty Information 151
World Time 99