Sub-Zero 601F/B Design Guide

SUB-ZERO DESIGN GUIDE

C O N T E N T S

Built-In Refrigeration

Integrated Refrigeration

Wine Storage

Undercounter Refrigeration

Warranty

4

31

50

67

77

Features and specifications indicated herein and on our website are subject to change at any time without notice.

Check our website, subzero.com, for the most up-to-date specifications.

SUB-ZERO ® is a registered trademark of Sub-Zero, Inc.

S U B - Z E R O D E S I G N G U I D E

W E L C O M E T O S U B - Z E R O

We make the ultimate built-in, integrated and undercounter refrigerators, freezers and wine storage units. We offer more solutions to your daily design problems of trying to work the largest appliance into a home without being obtrusive. Placing refrigeration in the home is no longer a problem, but, rather, an opportunity to exercise your creativity.

Sub-Zero has rethought traditional built-in refrigeration, a category it pioneered, with over

60 years of experience. When our complete line of configurations—all refrigerator and all freezer, over-and-under, or side-by-side—are coupled with three design alternatives and classic, platinum and carbon stainless steel finishes, the result is unlimited flexibility in satisfying your client‘s needs for residential refrigeration.

Created to blend invisibly into your home‘s decor, the Integrated line lets you incorporate refrigeration anywhere in the house—the kitchen, master suite, media room or workout room.

These tall units or two-drawer base refrigerators, freezers and combination units can be hidden inside the furniture or cabinetry of your choosing.

Sub-Zero is breaking with conventional ways of offering Wine Storage for designers and their clients. Our Built-In and Integrated models, along with the free-standing Model 424FS, offer unlimited design and storage capabilities.

Our reputation is legendary. We have engineered and manufactured the best products in the business, and we stand behind our products with an unsurpassed warranty and a network of technicians to help you if service is necessary.

See details of our warranty at the end of this guide.

Comprehensive installation instructions are shipped with each model. Refer to those instructions in preparing and installing all

Sub-Zero products. These instructions along with product specifications and downloadable

2D and 3D CAD files, as well as pdf files can be found on our website, subzero.com.

I M P O R T A N T N O T E

As you follow these instructions, you will notice warning and caution symbols.

This blocked information is important for the safe and efficient installation of

Sub-Zero equipment. There are two types of potential hazards that may occur during installation.

signals a situation where minor injury or product damage may occur if you do not follow instructions.

states a hazard that may cause serious injury or death if precautions are not followed.

Another footnote we would like to identify is IMPORTANT NOTE: This highlights information that is especially relevant to a problem-free installation.

C O N T A C T

I N F O R M A T I O N

Sub-Zero Customer

Service:

800-222-7820

Website: subzero.com

3

Model 695/F

Framed

Model 695/O

Overlay

B U I L T - I N R E F R I G E R A T I O N

B U I L T - I N R E F R I G E R A T I O N

Sub-Zero’s Built-In line offers you the most complete set of design options in built-in refrigeration for all of its models, from the classic look of the framed unit to the beauty of the overlay models and the professional treatment of the wrapped stainless steel doors.

Aside from the classic stainless steel, Sub-Zero offers platinum and carbon premium stainless steel finishes on its Built-In models and many related accessories. The only exception to these design alternatives are Models 648PRO and

648PROG, which are offered only in the classic stainless steel design application. In addition,

Models 685 and 695 are offered in framed, overlay and classic stainless steel (not platinum or carbon).

Glass doors are available on our Models 601R,

611 and 650. They each come in a framed, overlay and stainless steel design. They all meet stringent Department of Energy standards.

Model 648PROG also features a glass door in its classic stainless steel look.

In the illustrations, we have shown the three different design configurations of the framed, overlay and stainless steel units applied to

Model 695. Please note how we qualify the different looks with the model number.

The traditional framed units come with an elegant full-length handle and an 11" (279) louvered grille.

Overlay models will come with no handle hardware, because the beauty of this design is that you can match the surrounding cabinetry hardware; however, we do offer optional handles as sales accessories. The new ice and water dispensing Models 685 and 695 are able to accept overlay panels. Overlay models will come with a standard 11" (279) panel grille that will accept decorative panel inserts. Models 601R,

601RG and 601F are only available with the louvered grille. No panel grille option is available.

All stainless steel models, with the exception of those mentioned earlier, are offered in the classic stainless steel finish and in the premium finishes of platinum and carbon. Stainless steel models come with a standard 11" (279) heavy-duty grille, 1" (25) diameter stainless steel handles and a stainless steel kickplate.

All grilles will be offered as options in 1" (25) increments from 10" (254) to 15" (381) and can be ordered as sales accessories. Models 601R,

601RG, 601F, 648PRO and 648PROG are the exception and are available only with an 11"

(279) grille.

An important step in assuring a successful plan is to make sure that the actual equipment shipped to your installation site matches the design you have ordered. Each of these three design options—framed, overlay and stainless steel—has specific installation requirements, which means it is vital that the unit match your planning and space needs.

Model 695/S

Classic

Stainless Steel

Dimensions in parentheses are in millimeters unless otherwise specified.

4

B U I L T - I N R E F R I G E R A T I O N

B U I L T - I N R E F R I G E R A T I O N

These illustrations represent the full line of

Sub-Zero Built-In models shown in the stainless steel design application with heavy-duty grille. Models 648PRO and 648PROG are available as built-in or free-standing units in classic stainless steel only.

For information regarding specific Built-In models, refer to the illustrations in this section. Regardless of the specific design application, framed, overlay or stainless steel, the interior specifications of each model are identical.

A L L R E F R I G E R A T O R | A L L F R E E Z E R

36"

(914)

36"

(914)

36"

(914)

73"

(1854)

73"

(1854)

73"

(1854)

M O D E L 6 0 1 R *

All Refrigerator

Energy Star

Qualified

O V E R - A N D - U N D E R

30"

(762)

M O D E L 6 0 1 R G *

All Refrigerator with Glass Door

Energy Star

Qualified

30"

(762)

M O D E L 6 0 1 F *

All Freezer

36"

(914)

With the installation of a harness kit, these appliances are Star-K compliant to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org. Models

648PRO and 648PROG are Star-K certified from the factory with no extra wiring harness required. For details about the harness kit, contact your

Sub-Zero dealer.

84"

(2134)

84"

(2134)

84"

(2134)

84"

(2134)

36"

(914)

M O D E L 6 1 1 *

Energy Star

Qualified

M O D E L 6 1 1 G * with Glass Door

M O D E L 6 5 0 *

Energy Star

Qualified

M O D E L 6 5 0 G * with Glass Door

S I D E - B Y - S I D E

36"

(914)

42"

(1067)

42"

(1067)

48"

(1219)

48"

(1219)

48"

(1219)

48"

(1219)

84"

(2134)

84"

(2134)

84"

(2134)

84"

(2134)

84"

(2134)

84"

(2134)

84"

(2134)

M O D E L 6 6 1 * M O D E L 6 4 2 * M O D E L 6 8 5 *

Ice | Water

Dispensing

*Verify availability with your local dealer or distributor.

Comprehensive installation instructions are shipped with each model. Refer to those instructions in preparing and installing all

Sub-Zero products. The instructions can also be found on our website, subzero.com.

M O D E L 6 3 2 * M O D E L 6 9 5 *

Ice | Water

Dispensing

M O D E L 6 4 8 P R O

Free-Standing or Built-In

M O D E L 6 4 8 P R O G

Free-Standing or Built-In

5

B U I L T - I N R E F R I G E R A T I O N

S U B - Z E R O

W A R R A N T Y

Sub-Zero products are covered by a two, five and twelve year residential warranty (exclusions apply). See warranty details at the end of this guide.

Dimensions in parentheses are in millimeters unless otherwise specified.

B U I L T - I N F E A T U R E S

Framed models—the classic look that made

Sub-Zero famous—feature a louvered grille and elegant full-length handle. An optional panel grille is available for framed units, except for Models

601R, 601RG and 601F. Optional panel conversion kits are available for the new ice and water dispensing Models 685 and 695.

Overlay models blend seamlessly into your overall room design and complement surrounding cabinetry. You add decorative hardware. Overlay models come with a panel grille that will accept decorative panel inserts. The new ice and water dispensing Models 685 and 695 are also available in the overlay application.

Stainless steel models feature wrapped doors,

1" (25) diameter stainless steel handles and a heavy-duty grille designed specifically to enhance the aesthetics of today's professional looking kitchens. All Built-In stainless steel models are offered in the classic stainless steel finish and in the premium finishes of platinum and carbon, except for Models 685, 695, 648PRO and

648PROG, which are offered in classic stainless steel only. The premium finishes are treated as special orders and must be ordered 90 days before you expect delivery.

Dual Refrigeration System. All Built-In combination models have the Sub-Zero dual refrigeration system, which ensures the freshest food and energy efficiency at the same time. You have precise independent control of the refrigerator and freezer compartments. In addition to two compressors, the PRO 48 has three separate evaporators to keep foods fresher longer and prevent odor transfer.

Glass Door. Model 601RG is an all refrigerator unit featuring a glass door. Models 611G and

650G are over-and-under combination units with a glass door on the refrigerator. These glass door models come in framed, overlay and stainless steel designs and meet stringent Department of

Energy standards. The side-by-side Model

648PROG features a glass door on the refrigerator side and comes in classic stainless steel only.

Stainless Steel. The PRO 48 (Models 648PRO and 648PROG) feature stainless steel construction inside and out with classic finish for professional strength and beauty.

Ice and Water Dispensing. Models 685 and 695 feature a dispenser that gives you both ice and chilled water through the refrigerator door.

Built-In Design. True cabinet depth design means every inch of the interior is easy to reach. The

PRO 48 can be built in or, with the free-standing accessory kit, used in a free-standing application.

Fresh Food. High-humidity crisper drawer with removable dividers is large and deep, with smooth sides for easy cleaning. The top refrigerated drawer on the PRO 48 features a tight-seal, retracting glass crisper lid that keeps produce exceptionally humid and fresh.

Electronic Controls. Up-front touch controls give you digital readings for quick, easy-to-read reference. The microprocessor provides supreme control, accurate to within one degree of preset temperatures, automatic defrosting that senses, then adapts to your use patterns, and a service indicator light. The PRO 48 also features exterior temperature displays.

Advanced Lighting. Bright lighting spreads even illumination throughout the compartment.

The source of the illumination is concealed. The

PRO 48 top LED lights bathe upper compartments in a soft glow. On the refrigerator side, channeled sidewall LEDs can even serve as a door-area night-light for Model 648PROG.

Adjustable Shelves. Cantilevered glass shelves make repositioning quick and easy. They are easy to clean, spill proof and steel reinforced for durability. The PRO 48 features glass shelves with stainless steel trim in the refrigerator and 100% stainless steel shelves in the freezer.

Slide-Out Bins. An exclusive PRO 48 feature— these versatile stainless steel bins hold small items, remove easily, and fit neatly under any shelf.

Door Shelves. All door shelves are adjustable for complete flexibility and convenience.

Dairy Storage. Dairy compartment is adjustable, with easy, one-door access, compartment dividers and a clean design. The dairy shelf is magnetically sealed to maintain freshness.

Automatic Ice. Ice maker provides high-quality, crescent-shaped ice that won‘t stick to the side of the glass. The PRO 48 features a water filter located just behind the easy-access pop-up grille, for ice as pure as it is fresh.

Energy Efficient. Our solid core doors improve insulation and structural integrity and help us exceed tough Department of Energy standards.

Magnetic gaskets around all doors give extratight seals.

Kickplate. Solid, adjustable kickplate gives a true built-in look and conforms to American Institute of Architects standards.

6

B U I L T - I N R E F R I G E R A T I O N

M O D E L 6 0 1 R

A L L R E F R I G E R A T O R

Energy Star Qualified

M O D E L O P T I O N S

Framed Design

Overlay Design

601R/F

601R/O

Classic Stainless Steel 601R/S

Platinum Stainless Steel 601R/P

Carbon Stainless Steel 601R/B

R E F R I G E R A T O R F E A T U R E S

4 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment with Dividers

Adjustable Roll-Out Deli Basket

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

M O D E L 6 0 1 R G

A L L R E F R I G E R A T O R

W I T H G L A S S D O O R

Energy Star Qualified

M O D E L O P T I O N S

Framed Design

Overlay Design

601RG/F

601RG/O

Classic Stainless Steel 601RG/S

Platinum Stainless Steel 601RG/P

Carbon Stainless Steel 601RG/B

R E F R I G E R A T O R F E A T U R E S

4 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment with Dividers

Triple-Pane UV Resistant Glass Door

Optional Accessory Roll-Out Deli Basket

Available

Egg Container

Optional High Altitude Glass Available**

M O D E L 6 0 1 F

A L L F R E E Z E R

M O D E L O P T I O N S

Framed Design

Overlay Design

601F/F

601F/O

Classic Stainless Steel 601F/S

Platinum Stainless Steel 601F/P

Carbon Stainless Steel 601F/B

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

36" (914)

73" (1854)

24" (610)

19.9 cu ft (564 L)

72 3 /

4

" (1848)

36 1 /

16

" (916)

LH or RH

399 kWh | $37*

391 lbs (177 kg)

391 lbs (177 kg)

420 lbs (191 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

36" (914)

73" (1854)

24" (610)

20.1 cu ft (569 L)

72 3 /

4

" (1848)

36 1 /

16

" (916)

LH or RH

400 kWh | $37*

400 lbs (181 kg)

400 lbs (181 kg)

430 lbs (195 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Freezer Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

36" (914)

73" (1854)

24" (610)

19.3 cu ft (547 L)

72 3 /

4

" (1848)

36 1 /

16

" (916)

LH or RH

737 kWh | $67*

378 lbs (171 kg)

378 lbs (171 kg)

406 lbs (184 kg)

F R E E Z E R F E A T U R E S

Automatic Ice Maker

3 Adjustable Wire Shelves

1 Stationary Glass Shelf

3 Freezer Storage Drawers

5 Adjustable Door Shelves

601RG

M O D E L 6 0 1 R

Verify availability with your local dealer or distributor.

*Annual energy costs are based on 9.06

cents per kilowatt hour.

**High altitude glass doors are for installations at or above 5,000' (1524 m) in elevation and will be treated as a special order. Please allow 90 days for delivery.

When ordering, add an (HA) before the

(G) to obtain the correct model number.

All models are shown in the stainless steel design application.

M O D E L 6 0 1 R G M O D E L 6 0 1 F

A C C E S S O R I E S

Contact your Sub-Zero Dealer

Front panels for framed design in white enamel and classic stainless steel— not available for glass door models

Side panels in white enamel and classic stainless steel

Extended framed handles

Decorative overlay handles

90˚ and 105˚ door stop kits

Roll-out deli basket

(Model 601RG)

Dozen egg container with lid

Harness kit for Star-K compliance

7

B U I L T - I N R E F R I G E R A T I O N

Verify availability with your local dealer or distributor.

*Annual energy costs are based on

9.06 cents per kilowatt hour.

**High altitude glass doors are for installations at or above 5,000'

(1524 m) in elevation and will be treated as a special order. Please allow 90 days for delivery. When ordering, add an (HA) before the (G) to obtain the correct model number.

All models are shown in the stainless steel design application.

M O D E L 6 1 1

O V E R - A N D - U N D E R

Energy Star Qualified

M O D E L O P T I O N S

Framed Design

Overlay Design

611/F

611/O

Classic Stainless Steel 611/S

Platinum Stainless Steel 611/P

Carbon Stainless Steel 611/B

R E F R I G E R A T O R ( D O O R )

3 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment with Divider

Adjustable Roll-Out Deli Basket

2 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R ( D R A W E R )

Full-Extension Roll-Out Freezer Drawer

Two-Tier Wire Storage Baskets

Automatic Ice Maker

M O D E L 6 1 1 G

O V E R - A N D - U N D E R

W I T H G L A S S D O O R

M O D E L O P T I O N S

Framed Design

Overlay Design

611G/F

611G/O

Classic Stainless Steel 611G/S

Platinum Stainless Steel 611G/P

Carbon Stainless Steel 611G/B

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

30" (762)

84" (2134)

24" (610)

12.7 cu ft (360 L)

3.9 cu ft (110 L)

83" (2108)

30 1 /

8

" (765)

463 kWh | $42*

430 lbs (195 kg)

430 lbs (195 kg)

462 lbs (210 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

30" (762)

84" (2134)

Overall Depth 24" (610)

Refrigerator Capacity 12.9 cu ft (365 L)

Freezer Capacity 3.9 cu ft (110 L)

Min Height Required 83" (2108)

Door Swing Clearance 30 1 /

8

" (765)

Annual Energy Usage 544 kWh | $50*

Shipping Wt (F) 471 lbs (214 kg)

Shipping Wt (O)

Shipping Wt (S/P/B)

471 lbs (214 kg)

476 lbs (216 kg)

R E F R I G E R A T O R ( D O O R )

3 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment with Divider

Triple-Pane UV Resistant Glass Door

Optional Accessory Roll-Out Deli Basket

Available

Egg Container

Optional High Altitude Glass Available**

F R E E Z E R ( D R A W E R )

Full-Extension Roll-Out Freezer Drawer

Two-Tier Wire Storage Baskets

Automatic Ice Maker

Dimensions in parentheses are in millimeters unless otherwise specified.

8

M O D E L 6 1 1 M O D E L 6 1 1 G

B U I L T - I N R E F R I G E R A T I O N

M O D E L 6 5 0

O V E R - A N D - U N D E R

Energy Star Qualified

M O D E L O P T I O N S

Framed Design

Overlay Design

650/F

650/O

Classic Stainless Steel 650/S

Platinum Stainless Steel 650/P

Carbon Stainless Steel 650/B

R E F R I G E R A T O R ( D O O R )

3 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment with Dividers

Adjustable Roll-Out Deli Basket

2 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R ( D R A W E R )

Full-Extension Roll-Out Freezer Drawer

Two-Tier Wire Storage Baskets

Automatic Ice Maker

M O D E L 6 5 0 G

O V E R - A N D - U N D E R

W I T H G L A S S D O O R

M O D E L O P T I O N S

Framed Design

Overlay Design

650G/F

650G/O

Classic Stainless Steel 650G/S

Platinum Stainless Steel 650G/P

Carbon Stainless Steel 650G/B

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

36" (914)

84" (2134)

24" (610)

15.7 cu ft (445 L)

4.9 cu ft (139 L)

83" (2108)

36 1 /

16

" (916)

481 kWh | $44*

482 lbs (219 kg)

482 lbs (219 kg)

515 lbs (234 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

36" (914)

84" (2134)

24" (610)

16.0 cu ft (453 L)

4.9 cu ft (139 L)

83" (2108)

36 1 /

16

" (916)

565 kWh | $52*

523 lbs (237 kg)

523 lbs (237 kg)

529 lbs (240 kg)

R E F R I G E R A T O R ( D O O R )

3 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment with Dividers

Triple-Pane UV Resistant Glass Door

Optional Accessory Roll-Out Deli Basket

Available

Egg Container

Optional High Altitude Glass Available**

F R E E Z E R ( D R A W E R )

Full-Extension Roll-Out Freezer Drawer

Two-Tier Wire Storage Baskets

Automatic Ice Maker

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

A C C E S S O R I E S

Contact your Sub-Zero Dealer

Front and grille panels for framed design in white enamel and classic stainless steel

Side panels in white enamel and classic stainless steel

Louvered, panel or stainless steel grilles in 1" (25) increments from

10" (254) to 15" (381) high

Extended framed handles

Decorative overlay handles

Roll-out deli basket (Models 611G and 650G)

Dozen egg container with lid

Harness kit for Star-K compliance

M O D E L 6 5 0 M O D E L 6 5 0 G

9

B U I L T - I N R E F R I G E R A T I O N

M O D E L 6 6 1

S I D E - B Y - S I D E

M O D E L O P T I O N S

Framed Design

Overlay Design

661/F

661/O

Classic Stainless Steel 661/S

Platinum Stainless Steel 661/P

Carbon Stainless Steel 661/B

M O D E L 6 4 2

S I D E - B Y - S I D E

M O D E L O P T I O N S

Framed Design

Overlay Design

642/F

642/O

Classic Stainless Steel 642/S

Platinum Stainless Steel 642/P

Carbon Stainless Steel 642/B

M O D E L 6 8 5

S I D E - B Y - S I D E

I C E | W A T E R D I S P E N S I N G

M O D E L O P T I O N S

Framed Design

Overlay Design

Classic Stainless Steel

685/F

685/O

685/S

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

36" (914)

84" (2134)

24" (610)

12.5 cu ft (354 L)

8.8 cu ft (249 L)

83" (2108)

20 3 /

4

" (527)

636 kWh | $58*

500 lbs (227 kg)

500 lbs (227 kg)

538 lbs (244 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

42" (1067)

84" (2134)

24" (610)

16.2 cu ft (459 L)

8.2 cu ft (232 L)

83" (2108)

25 9 /

16

" (649)

650 kWh | $59*

541 lbs (245 kg)

541 lbs (245 kg)

582 lbs (264 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S)

42" (1067)

84" (2134)

24" (610)

15.6 cu ft (442 L)

8.2 cu ft (232 L)

83" (2108)

25 9 /

16

" (649)

694 kWh | $63*

569 lbs (258 kg)

569 lbs (258 kg)

608 lbs (276 kg)

R E F R I G E R A T O R F E A T U R E S

4 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment

1 Storage Drawer

Adjustable Roll-Out Deli Basket

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R F E A T U R E S

Automatic Ice Maker

2 Adjustable Wire Shelves

1 Stationary Solid Shelf

4 Storage Drawers

5 Adjustable Door Shelves

R E F R I G E R A T O R F E A T U R E S

4 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment

1 Storage Drawer

Adjustable Roll-Out Deli Basket

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R F E A T U R E S

Automatic Ice Maker

3 Adjustable Wire Shelves

1 Stationary Solid Shelf

3 Storage Drawers

5 Adjustable Door Shelves

R E F R I G E R A T O R F E A T U R E S

4 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment

1 Storage Drawer

Adjustable Roll-Out Deli Basket

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R F E A T U R E S

Automatic Ice Maker

2 Adjustable Wire Shelves

1 Stationary Wire Shelf

3 Storage Drawers

5 Adjustable Door Shelves

2 Juice Can Shelves

M O D E L 6 6 1

10

M O D E L 6 4 2 M O D E L 6 8 5

B U I L T - I N R E F R I G E R A T I O N

M O D E L 6 3 2

S I D E - B Y - S I D E

M O D E L O P T I O N S

Framed Design

Overlay Design

632/F

632/O

Classic Stainless Steel 632/S

Platinum Stainless Steel 632/P

Carbon Stainless Steel 632/B

M O D E L 6 9 5

S I D E - B Y - S I D E

I C E | W A T E R D I S P E N S I N G

M O D E L O P T I O N S

Framed Design

Overlay Design

Classic Stainless Steel

695/F

695/O

695/S

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S/P/B)

48" (1219)

84" (2134)

24" (610)

18.9 cu ft (535 L)

9.8 cu ft (278 L)

83" (2108)

29 1 /

4

" (743)

675 kWh | $62*

582 lbs (264 kg)

582 lbs (264 kg)

630 lbs (286 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Wt (F)

Shipping Wt (O)

Shipping Wt (S)

48" (1219)

84" (2134)

24" (610)

18.2 cu ft (515 L)

9.8 cu ft (278 L)

83" (2108)

29 1 /

4

" (743)

747 kWh | $68*

610 lbs (277 kg)

610 lbs (277 kg)

656 lbs (298 kg)

R E F R I G E R A T O R F E A T U R E S

4 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment with Divider

2 Storage Drawers

Adjustable Roll-Out Deli Basket

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R F E A T U R E S

Automatic Ice Maker

3 Adjustable Wire Shelves

1 Stationary Solid Shelf

3 Storage Drawers

5 Adjustable Door Shelves

R E F R I G E R A T O R F E A T U R E S

4 Adjustable Glass Shelves

1 Stationary Glass Shelf

High-Humidity Compartment with Divider

2 Storage Drawers

Adjustable Roll-Out Deli Basket

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R F E A T U R E S

Automatic Ice Maker

2 Adjustable Wire Shelves

1 Stationary Wire Shelf

3 Storage Drawers

5 Adjustable Door Shelves

2 Juice Can Shelves

Verify availability with your local dealer or distributor.

*Annual energy costs are based on

9.06 cents per kilowatt hour.

All models are shown in the stainless steel design application.

A C C E S S O R I E S

Contact your Sub-Zero Dealer

Front and grille panels for framed design in white enamel and classic stainless steel

Side panels in white enamel and classic stainless steel

Louvered, panel or stainless steel grilles in 1" (25) increments from

10" (254) to 15" (381) high

Framed panel kits (Models 685 and 695)*

Extended framed handles

Decorative overlay handles

90˚ and 105˚ door stop kits

Dozen egg container with lid

Harness kit for Star-K compliance

*Refer to page 19 for additional information.

M O D E L 6 3 2 M O D E L 6 9 5

Dimensions in parentheses are in millimeters unless otherwise specified.

11

B U I L T - I N R E F R I G E R A T I O N

*Annual energy costs are based on

9.06 cents per kilowatt hour.

**High altitude glass doors are for installations at or above 5,000'

(1524 m) in elevation and will be treated as a special order. Please allow 90 days for delivery. When ordering, add an (HA) before the (G) to obtain the correct model number.

A C C E S S O R I E S

Contact your Sub-Zero Dealer

90˚ door stop kit— right or left hinge

Dozen egg container with lid

Slide-out stainless steel refrigerator bin

Refrigerator drawer dividers

Classic stainless steel side panel

Free-standing kit—includes two stainless steel side panels and top lid

M O D E L 6 4 8 P R O

S I D E - B Y - S I D E

B U I L T - I N O R F R E E - S T A N D I N G

M O D E L 6 4 8 P R O G

S I D E - B Y - S I D E

W I T H G L A S S D O O R

B U I L T - I N O R F R E E - S T A N D I N G

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Weight

48" (1219)

84" (2134)

25 7 /

8

" (657)

18.4 cu ft (521 L)

11.7 cu ft (331 L)

83 1 /

2

" (2121)

28 3 /

4

" (730)

689 kWh | $63*

860 lbs (390 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Annual Energy Usage

Shipping Weight

48" (1219)

84" (2134)

25 7 /

8

" (657)

18.4 cu ft (521 L)

11.7 cu ft (331 L)

83 1 /

2

" (2121)

28 3 /

4

" (730)

689 kWh | $63*

875 lbs (397 kg)

R E F R I G E R A T O R

(Door and Two Drawers)

3 Adjustable Glass Shelves

1 Stationary Glass Shelf

2 Adjustable Slide-Out Stainless Steel Bins

1 Crisper Lid

Dividers for Drawers Included

F R E E Z E R

(Door and Two Drawers)

Automatic Ice Maker

Water Filtration Filter

3 Adjustable Stainless Steel Shelves

1 Stationary Stainless Steel Shelf

1 Stainless Steel Ice Bucket

R E F R I G E R A T O R

(Door and Two Drawers)

3 Adjustable Glass Shelves

1 Stationary Glass Shelf

2 Adjustable Slide-Out Stainless Steel Bins

1 Crisper Lid

Dividers for Drawers Included

Triple-Pane UV Resistant Glass Door

Optional High Altitude Glass Available**

F R E E Z E R

(Door and Two Drawers)

Automatic Ice Maker

Water Filtration Filter

3 Adjustable Stainless Steel Shelves

1 Stationary Stainless Steel Shelf

1 Stainless Steel Ice Bucket

M O D E L 6 4 8 P R O M O D E L 6 4 8 P R O G

Dimensions in parentheses are in millimeters unless otherwise specified.

12

B U I L T - I N R E F R I G E R A T I O N

P L A N N I N G I N F O R M A T I O N

Although the Sub-Zero Built-In line offers a wide range of designs and configurations, the basic planning considerations for all models have much in common. As you integrate Built-In models into your overall plan, review installation requirements for your particular model(s). The

Installation Specifications illustrations provide planning information for all Built-In models— framed, overlay and stainless steel.

Allow the door(s) to open a minimum of 90˚ or you‘ll have problems removing drawers. With the door opening at 90˚, you may have to move drawers slightly to clear the door interior.

For corner installations, allow for a minimum 3"

(76) filler so that the door can open to 90˚. If you‘re using raised panels, consider using a wider filler.

When units are installed side by side, a filler strip is recommended. The width of this filler strip will vary depending on the configuration and panels you use.

Be sure to add the filler strip width to your finished rough opening dimension. In any installation of two units side by side without a filler strip, add an additional 1 /

2

" (13) to your combined numbers. This will allow for the proper width.

IMPORTANT NOTE: Refer to the full-scale illustrations at the end of this section for specifics on door openings and filler size alternatives.

E L E C T R I C A L R E Q U I R E M E N T S

A 115 V AC, 60 Hz, 15 amp circuit breaker and electrical supply are required. A separate circuit, servicing only this appliance, is required.

All Sub-Zero Built-In models are equipped with a power supply cord with a 3-prong grounding plug, which must be plugged into a mating

3-prong grounding-type wall receptacle. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. Refer to the Installation Specifications illustration for your model on the following pages.

IMPORTANT NOTE: A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

P L U M B I N G C O N S I D E R A T I O N S

For Built-In models with an automatic ice maker, rough in the water supply line. Connect a 1 /

4

"

OD copper line to the house supply, being sure to use an easily accessible shut-off valve between the supply and the refrigerator.

Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer.

For Built-In models except Models 648PRO and

648PROG, a line filter is required when water conditions have a high sediment content. The ice maker operates on water pressure of 20 psi

(1.4 bar) to 100 psi (6.9 bar).

IMPORTANT NOTE: In some cases a reverse osmosis water filter system may not be able to maintain the minimum water pressure consistently.

Models 648PRO and 648PROG come with an automatic ice maker and an integrated water filtration system. This system operates on water pressure between 35 psi (2.4 bar) and 120 psi

(8.3 bar).

IMPORTANT NOTE: A reverse osmosis system can be used with Models 648PRO and

648PROG, provided there is constant water pressure of 20 psi (1.4 bar) to 120 psi (8.3 bar) supplied to the unit at all times. In this application, the integrated water filtration system must be set to bypass mode. This is achieved by removing the water filter cartridge. Refer to the

PRO 48 Installation Instructions packed with the unit for detailed instructions.

The water line should be routed up through the floor within 1 /

2

" (13) from the back wall and no higher than 3" (76) off the floor. If you have to come through the wall, make sure the water line is no more than 3" (76) from the floor.

Regardless of the routing, allow 3' (1 m) of excess copper tubing to remain outside the wall or floor for easy connection to the unit. Refer to

Installation Specification illustrations.

M O D E L O P T I O N S

Model 601R

36" (914)

All Refrigerator

Model 601RG

36" (914)

All Refrigerator with Glass Door

Model 601F

36" (914)

All Freezer

Model 611

30" (762)

Over-and-Under

Model 611G

30" (762)

Over-and-Under with Glass Door

Model 650

36" (914)

Over-and-Under

Model 650G

36" (914)

Over-and-Under with Glass Door

Model 661

36" (914)

Side-by-Side

Model 642

42" (1067)

Side-by-Side

Model 685

42" (1067)

Side-by-Side

Ice | Water Dispensing

Model 632

48" (1219)

Side-by-Side

Model 695

48" (1219)

Side-by-Side

Ice | Water Dispensing

Model 648PRO

48" (1219)

Side-by-Side

Built-In or Free-Standing

Model 648PROG

48" (1219)

Side-by-Side with Glass Door

Built-In or Free-Standing

13

B U I L T - I N R E F R I G E R A T I O N

O V E R A L L D I M E N S I O N S

All Refrigerator | All Freezer Models

A L L R E F R I G E R A T O R

A L L F R E E Z E R

Model 601R

All Refrigerator

Model 601RG

All Refrigerator with Glass Door

Model 601F

All Freezer

73"

(1854)

36"

(914)

Model 601R

All Refrigerator

Width 36" (914)

Height 73" (1854)

Depth 24" (610)

36"

(914)

Model 601RG

All Refrigerator with Glass Door

Width 36" (914)

Height 73" (1854)

Depth 24" (610)

Illustrations shown in stainless steel design.

73"

(1854)

36"

(914)

Model 601F

All Freezer

Width 36" (914)

Height 73" (1854)

Depth 24" (610)

73"

(1854)

24"

(610)

Refer to the fullscale illustrations at the end of this section for specifics on door openings and other specifications.

I N S T A L L A T I O N S P E C I F I C A T I O N S

All Refrigerator | All Freezer Models

Models 601R and 601RG, which do not have an ice maker, will not require the water line connection.

Dimensions are for finished rough openings.

Door swing clearances are based on stainless steel door and handle dimensions.

3 /

8

"

(10)

FRAME

EXTENSION

90˚

23 7 /

8

"

(606)

BEHIND

FRAME

36 1 /

16

"

(916)

Dimensions in parentheses are in millimeters unless otherwise specified.

14

24"

(610)

ROUGH

OPENING

DEPTH

EXTEND

WATER LINE

APPROX 36" (914)

FROM BACK WALL

(601F ONLY)

SHUT-OFF

VALVE

TOP VIEW

35 1 / 2 " (902)

ROUGH OPENING WIDTH

72 3 / 4 " (1848)

ROUGH OPENING

HEIGHT TO

FINISHED

FLOORING

LOCATE ELECTRICAL

WITHIN ENTIRE SHADED AREA

11"

(279)

LOCATE WATER SUPPLY

WITHIN BOTTOM SHADED

AREA ONLY (601F ONLY)

24"

(610)

E

6"

(152)

3"

(76)

W

FRONT VIEW

72 3 / 4 " (1848)

MINIMUM HEIGHT

REQUIRED TO

FINISHED

FLOORING

(LEVELERS IN)

B U I L T - I N R E F R I G E R A T I O N

O V E R A L L D I M E N S I O N S

Over-and-Under Refrigerator / Freezer Models

84"

(2134)

84"

(2134)

84"

(2134)

84"

(2134)

O V E R - A N D - U N D E R

Model 611

Model 611G with Glass Door

Model 650

Model 650G with Glass Door

30"

(762)

Model 611

Width 30" (762)

Height 84" (2134)

Depth 24" (610)

30"

(762)

Model 611G with Glass Door

Width 30" (762)

Height 84" (2134)

Depth 24" (610)

Illustrations shown in stainless steel design.

36"

(914)

Model 650

Width 36" (914)

Height 84" (2134)

Depth 24" (610)

36"

(914)

Model 650G with Glass Door

Width 36" (914)

Height 84" (2134)

Depth 24" (610)

24"

(610)

I N S T A L L A T I O N S P E C I F I C A T I O N S

Over-and-Under Refrigerator / Freezer Models

Model 611

A) Rough Opening Width 29 1 /

2

" (749)

B) Min Door Clearance 30 1 /

8

" (765)

Model 611G

A) Rough Opening Width 29 1 /

2

" (749)

B) Min Door Clearance 30 1 /

8

" (765)

Model 650

A) Rough Opening Width 35 1 /

2

" (902)

B) Min Door Clearance 36 1 /

16

" (916)

Model 650G

A) Rough Opening Width 35 1 /

2

" (902)

B) Min Door Clearance 36 1 /

16

" (916)

Dimensions are for finished rough openings.

Door swing clearances are based on stainless steel door and handle dimensions.

24"

(610)

ROUGH

OPENING

DEPTH

EXTEND

WATER LINE

APPROX 36" (914)

FROM BACK WALL

SHUT-OFF

VALVE

TOP VIEW

7"

(178)

E

6"

(152)

LOCATE ELECTRICAL

WITHIN SHADED AREA

A

ROUGH OPENING WIDTH

83" (2108)

MIN HEIGHT

REQUIRED TO

FINISHED

FLOORING

(LEVELERS IN)

75

1

/ 2 "

(1918)

83

3

/ 4 " (2127)

ROUGH OPENING

HEIGHT TO

FINISHED

FLOORING WITH

STANDARD

11" (279) GRILLE

3"

(76)

LOCATE WATER SUPPLY

WITHIN SHADED AREA

18"

(457)

6"

(152)

W

FRONT VIEW

3

/ 8 " (10)

FRAME

EXTENSION

90˚

23 7 /

8

"

(606)

BEHIND

FRAME

B

Refer to installation instructions shipped with each Wolf product for detailed specifications.

15

B U I L T - I N R E F R I G E R A T I O N

O V E R A L L D I M E N S I O N S

Side-by-Side Refrigerator | Freezer Models

84"

(2134)

36"

(914)

42"

(1067)

Model 661 Model 642

Width 36" (914)

Height 84" (2134)

Depth 24" (610)

Width 42" (1067)

Height 84" (2134)

Depth 24" (610)

42"

(1067)

48"

(1219)

Model 685

Ice | Water Dispensing

Width 42" (1067)

Height 84" (2134)

Depth 24" (610)

Model 632

Width 48" (1219)

Height 84" (2134)

Depth 24" (610)

48"

(1219)

Model 695

Ice | Water Dispensing

Width 48" (1219)

Height 84" (2134)

Depth 24" (610)

24"

(610)

Illustrations shown in stainless steel design.

S I D E - B Y - S I D E

Model 661

Model 642

Model 685

Ice | Water Dispensing

Model 632

Model 695

Ice | Water Dispensing

3 /

8

"

(10)

FRAME

EXTENSION

90˚

23 7 / 8 "

(606)

BEHIND

FRAME

B

I N S T A L L A T I O N S P E C I F I C A T I O N S

Side-by-Side Refrigerator | Freezer Models

Model 661

A) Rough Opening Width 35 1 /

2

" (902)

B) Min Door Clearance 20 3 /

4

" (527)

Model 642

A) Rough Opening Width 41 1 /

2

" (1054)

B) Min Door Clearance 25 9 /

16

" (649)

Model 685

A) Rough Opening Width 41 1 /

2

" (1054)

B) Min Door Clearance 25 9 /

16

" (649)

Model 632

A) Rough Opening Width 47 1 /

2

" (1206)

B) Min Door Clearance 29 1 /

4

" (743)

Model 695

A) Rough Opening Width 47 1 /

2

" (1206)

B) Min Door Clearance 29 1 /

4

" (743)

Dimensions are for finished rough openings.

Door swing clearances are based on stainless steel door and handle dimensions.

Dimensions in parentheses are in millimeters unless otherwise specified.

16

24"

(610)

ROUGH

OPENING

DEPTH

EXTEND

WATER LINE

APPROX 36" (914)

FROM BACK WALL

SHUT-OFF

VALVE

TOP VIEW

7"

(178)

E

6"

(152)

LOCATE ELECTRICAL

WITHIN SHADED AREA

A

ROUGH OPENING WIDTH

83" (2108)

MIN HEIGHT

REQUIRED TO

FINISHED

FLOORING

(LEVELERS IN)

75

1

/ 2 "

(1918)

3"

(76)

LOCATE WATER SUPPLY

WITHIN SHADED AREA

18"

(457)

6"

(152)

W

FRONT VIEW

83

3

/ 4 " (2127)

ROUGH OPENING

HEIGHT TO

FINISHED

FLOORING WITH

STANDARD

11" (279) GRILLE

B U I L T - I N R E F R I G E R A T I O N

O V E R A L L D I M E N S I O N S

PRO 48 Side-by-Side Refrigerator | Freezer Models

84"

(2134)

23 7 /

8

"

(606)

P R O 4 8

S I D E - B Y - S I D E

Model 648PRO

Built-In or Free-Standing

Model 648PROG with Glass Door

Built-In or Free-Standing

48"

(1219)

Model 648PRO

Width 48" (1219)

Height 84" (2134)

Depth 23 7 /

8

" (606)*

25 7 /

8

" (657)**

48"

(1219)

Model 648PROG with Glass Door

Width 48" (1219)

Height 84" (2134)

Depth 23 7 /

8

" (606)*

25 7 /

8

" (657)**

*Depth from behind face frame to back of unit for standard installation.

**Depth from front of face frame to back of unit for flush installation.

25

7

/ 8 "

(657)

30

5

/ 32 "

(766)

I N S T A L L A T I O N S P E C I F I C A T I O N S

PRO 48 Side-by-Side Refrigerator | Freezer Models

Built-In or Free-Standing

Models 648PRO and 648PROG can be used free-standing or installed as a standard or flush built-in application. For standard built-in installations, the face frame of the unit will extend 2" (51) beyond cabinetry.

In flush built-in installations, the front of the face frame will be flush with surrounding cabinetry.

Dimensions are for finished rough openings.

23 7 /

8

"

(606)

BEHIND

FACE

FRAME

20 1 /

2

"

(521)

25 7 /

8

"

(657)

TO FRONT

OF FACE

FRAME

28 3 /

4

"

(730)

ROUGH

OPENING DEPTH

24"

(610)

STANDARD

26" (660)

FLUSH

MIN

1

36" (914)

/

4

"

COPPER

WATER LINE

SHUT-OFF

VALVE

TOP VIEW

7"

(178)

E

6"

(152)

LOCATE ELECTRICAL

WITHIN SHADED AREA

ROUGH

OPENING WIDTH

47

1

/ 2 " (1206) STANDARD

48" (1219) FLUSH

MIN HEIGHT

REQUIRED

TO FINISHED

FLOORING

(LEVELERS IN)

83

1

/ 2 " (2121)

STANDARD

83 3 / 4 " (2127)

FLUSH

ROUGH

OPENING HEIGHT

TO FINISHED

FLOORING

83

3

/ 4 " (2127)

STANDARD

84 1 / 8 " (2137)

FLUSH

75 1 /

2

"

(1918)

48"

(1219) LOCATE WATER SUPPLY

WITHIN SHADED AREA

3" (76)

6"

(152)

W

5 3 / 16 "

(132)

FRONT VIEW

Refer to the fullscale illustrations at the end of this section for specifics on door openings and other specifications.

Refer to installation instructions shipped with each Wolf product for detailed specifications.

17

B U I L T - I N R E F R I G E R A T I O N

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

A N T I - T I P B L O C K I N G K I T

To prevent the unit from tipping forward and to provide a stable installation, the unit must be secured in place with an anti-tip blocking kit. If there is a solid soffit above the unit with clearance between the unit and the soffit of 1" (25) or less, you won‘t need to block the unit. But for installations with clearances of more than 1"

(25), you must block the unit with the anti-tip blocking kit (wood block and hardware) provided with each Sub-Zero Built-In model. Refer to the

Built-In Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly.

A D D I N G P A N E L S

In your plan for panels, be sure you are working with the Sub-Zero panel design family called for in your design. If you have chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install door panels.

Specifications on the following pages provide panel dimensions and installation considerations for framed and overlay door panels.

Side panels can be used with the framed, overlay and stainless steel design applications.

Refer to specifications on page 26.

F R A M E D D O O R P A N E L S

If you and your client have ordered a framed design model, you will be adding panels to give the unit the custom Sub-Zero look. The framed panel design option is available on all Built-In units except Models 648PRO and 648PROG. For exact door panel dimensions for Built-In framed models, refer to the Framed Panel Specifications on pages 20–21. Also refer to the full-scale illustrations at the end of this section for panel and handle considerations.

The traditional framed models come with an elegant, smooth, full-length handle. Optional extended full-length handles that provide additional finger clearance for raised panels are available through your Sub-Zero dealer.

If the thickness of the custom panels is less than 1 /

4

" (6), they must be backed up with a sheet of shim material to build the total thickness to 1 /

4

" (6). If the panel is thicker than 1 /

4

"

(6), an edge must be routed around the panel to ensure a proper fit. Refer to illustrations 1 and 2.

IMPORTANT NOTE: On all framed models, routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale illustrations at the end of this section.

For glass door Models 601RG, 611G and 650G, the refrigerator door panel must include a cutout to accommodate the window. Refer to the

Framed Panel Specifications on pages 20–21.

IMPORTANT NOTE: On glass door models, the glass portion of the door must be exposed and not covered by any part of the panel.

For Models 685 and 695, the refrigerator door panel must include a cut-out to accommodate the glasswell and bezel. The thickness of the panel in this area can range from 1 /

4

" (6) to a maximum of 1 1 /

8

" (29). If the panel is thicker, provisions must be made to rout out a space to accommodate the decorative bezel surrounding the glasswell.

PANELS

1 /

4

" (6) THICK OR LESS

Trim reveal

1

/ 4 " (6) min

PANELS THICKER THAN

1 /

4

" (6)

Trim reveal

1 /

4

"

(6) min

Rout to 1 / 4 " (6) thickness

1

/ 4 " (6) Panel

Dimensions in parentheses are in millimeters unless otherwise specified.

Illus. 1

18

Illus. 2

B U I L T - I N R E F R I G E R A T I O N

G L A S S W E L L P A N E L O P T I O N S

If you choose not to use custom wood panels above or below the glasswell for Model 685 or

695 framed application, a stainless steel insert panel will be provided with the partial framed accessory kit. This accessory kit (FRAMPAR), includes partial framed molding and classic stainless steel inset handle panel to provide a spill-resistant finish above and below the glasswell on the refrigerator door only. Refer to the

Framed Panel Specifications for this option on page 21.

With the framed retrofit accessory kit, existing

Model 680 or 690 door panels can be used on a new Model 685 or 695 framed unit. This accessory kit (FRAMRET) includes framed retrofit moldings and classic stainless steel inset handle panels to accommodate existing Model 680 or

690 framed refrigerator and freezer door panels.

IMPORTANT NOTE: When using Model 680 or

690 raised panels with the framed retrofit kit

(FRAMRET), a 1 /

2

" (13) trim reveal down to 1 /

4

"

(6) thickness is necessary at the bezel in order for the panels to fit properly.

Both accessory kits are available through your

Sub-Zero dealer. Refer to the illustrations below.

O P T I O N A L P A N E L G R I L L E

An 11" (279) louvered grille is standard on framed applications. Optional louvered grilles are available in 1" (25) height increments from 10"

(254) to 15" (381) for all Built-In models except

Models 601R, 601RG, 601F, 648PRO and

648PROG.

You may choose to use Sub-Zero‘s optional panel grille for some of your framed applications.

The panel grilles can be used with all Built-In models except Models 601R, 601RG, 601F,

648PRO and 648PROG and are available in 1"

(25) height increments from 10" (254) to 15"

(381).

For each model, the width of the panel grille will be the same, regardless of the height you have chosen. To determine the panel grille insert size, use the width dimension listed for your model and the height dimension for the grille option you have chosen. Specifications for the Panel

Grille Option are listed on page 21.

P A N E L

R E Q U I R E M E N T S

The weight of each framed door panel cannot exceed

50 lbs (23 kg).

Partial Framed Kit

FRAMPAR

Framed Retrofit Kit

FRAMRET

F R A M E D P A N E L S

To install framed panels, see the detailed procedures outlined in the

Sub-Zero Built-In

Installation

Instructions.

19

B U I L T - I N R E F R I G E R A T I O N

F R A M E D D O O R P A N E L S P E C I F I C A T I O N S

All Refrigerator | All Freezer Framed (F) Models

Model 601R

Refrigerator Framed Panel

W

34 1 /

8

" (867)

Raised Panel Handle Recess Location –

Refrigerator Panel A) 29 15 /

32

" (749)

H

58 15 /

16

" (1497)

Model 601RG

Refrigerator Framed Panel

W

34 1 /

8

" (867)

H

58 15 /

16

" (1497)

Raised Panel Handle Recess Location –

Refrigerator Panel A) 29 15 /

32

" (749)

Window Cut-Out Dimensions

Window Cut-Out Location

25 3 /

8

" (645) 41 3 /

16

" (1046)

C) 4 3 /

8

" (111) D) 13 3 /

8

" (340)

Model 601F

Freezer Framed Panel

W

34 1 /

8

" (867)

Raised Panel Handle Recess Location –

Freezer Panel A) 29 15 /

32

" (749)

H

58 15 /

16

" (1497)

IMPORTANT NOTE: Panel specifications are for Built-In framed (F) models. Panel specifications for overlay models are on pages 24–25.

F R A M E D D O O R P A N E L S P E C I F I C A T I O N S

Over-and-Under Framed (F) Models

Model 611

Refrigerator Framed Panel

Freezer Framed Panel

W

28 1 /

8

" (714)

28 1 /

8

" (714)

Raised Panel Handle Recess Location –

Refrigerator Panel

Freezer Panel

A) 24 1 /

32

" (610)

B) 14 1 /

16

" (357)

H

48 1 /

16

" (1221)

18 3 /

8

" (467)

Model 611G

Refrigerator Framed Panel

Freezer Framed Panel

Window Cut-Out Dimensions

Window Cut-Out Location

W

28 1 /

8

" (714)

28 1 /

8

" (714)

Raised Panel Handle Recess Location –

Refrigerator Panel A) 24 1 /

32

" (610)

Freezer Panel B) 14 1 /

16

" (357)

H

48 1 /

16

" (1221)

18 3 /

8

" (467)

19 3 /

8

" (492) 39 5 /

16

" (999)

C) 4 3 /

8

" (111) D) 4 3 /

8

" (111)

Model 650

Refrigerator Framed Panel

Freezer Framed Panel

W

34 1 /

8

" (867)

34 1 /

8

" (867)

Raised Panel Handle Recess Location –

Refrigerator Panel A) 24 1 /

32

" (610)

Freezer Panel B) 17 1 /

16

" (433)

H

48 1 /

16

" (1221)

18 3 /

8

" (467)

Model 650G

Refrigerator Framed Panel

Freezer Framed Panel

W

34 1 /

8

" (867)

34 1 /

8

" (867)

H

48 1 /

16

" (1221)

18 3 /

8

" (467)

Raised Panel Handle Recess Location –

Refrigerator Panel A) 24 1 /

32

" (610)

Freezer Panel B) 17 1 /

16

" (433)

Window Cut-Out Dimensions

Window Cut-Out Location

25 3 /

8

" (645) 39 5 /

16

" (999)

C) 4 3 /

8

" (111) D) 4 3 /

8

" (111)

IMPORTANT NOTE: Panel specifications are for Built-In framed (F) models. Panel specifications for overlay models are on pages 24–25.

F R A M E D P A N E L S

Panel specifications are for Built-In framed (F) models.

Dimensions in parentheses are in millimeters unless otherwise specified.

20

A

14"

(356)

W

Models 601R and 601F

H

C

C C

14"

(356)

A

D

W

Model 601RG

H

A

14" (356) H

B

H

W

Models 611 and 650

C

C C

14" (356) H

A

D

B

H

W

Models 611G and 650G

B U I L T - I N R E F R I G E R A T I O N

F R A M E D D O O R P A N E L S P E C I F I C A T I O N S

Side-by-Side Framed (F) Models

Model 661

Refrigerator Framed Panel

Freezer Framed Panel

W

19 1 /

8

" (486)

14 5 /

8

" (371)

Raised Panel Handle Recess Location –

Refrigerator | Freezer Panel A) 38 5 /

32

" (969)

H

67 11 /

16

" (1719)

67 11 /

16

" (1719)

Model 642

Refrigerator Framed Panel

Freezer Framed Panel

W

24" (610)

15 5 /

8

" (397)

Raised Panel Handle Recess Location –

Refrigerator | Freezer Panel A) 38 5 /

32

" (969)

H

67 11 /

16

" (1719)

67 11 /

16

" (1719)

Model 685

Refrigerator Framed Panel

Freezer Framed Panel

W

24" (610)

15 5 /

8

" (397)

H

67 11 /

16

" (1719)

67 11 /

16

" (1719)

Glasswell Cut-Out Dimensions 5 7 /

8

" (150) 12 7 /

16

" (315)

Glasswell Location (Refrigerator) E) 1 9 /

16

" (39) F) 28 9 /

16

" (726)

Model 632

Refrigerator Framed Panel

Freezer Framed Panel

W H

27 11 /

16

" (703) 67 11 /

16

" (1719)

17 15 /

16

" (456) 67 11 /

16

" (1719)

Raised Panel Handle Recess Location –

Refrigerator | Freezer Panel A) 38 5 /

32

" (969)

Model 695

Refrigerator Framed Panel

Freezer Framed Panel

W H

27 11 /

16

" (703) 67 11 /

16

" (1719)

17 15 /

16

" (456) 67 11 /

16

" (1719)

Glasswell Cut-Out Dimensions 5 7 /

8

" (150) 12 7 /

16

" (315)

Glasswell Location (Refrigerator) E) 1 9 /

16

" (39) F) 28 9 /

16

" (726)

IMPORTANT NOTE: Panel specifications are for Built-In framed (F) models. Panel specifications for overlay models are on pages 24–25.

For Models 685 and 695, panel thickness in the glasswell area can range from 1 /

4

" (6) to a maximum of 1 1 /

8

" (29). If the panel is thicker, you must rout out a minimum 1 /

4

" (6) flat landing area to accommodate the bezel surrounding the glasswell.

P A R T I A L F R A M E D D O O R P A N E L O P T I O N

Ice | Water Dispensing Framed (F) Models

Model 685 W

Refrigerator Partial Framed Panel 15 5 /

8

" (397)

Freezer Partial Framed Panel 15 5 /

8

" (397)

H

67 11 /

16

" (1719)

67 11 /

16

" (1719)

Model 695 W H

Refrigerator Partial Framed Panel 17 15 /

16

" (456) 67 11 /

16

" (1719)

Freezer Partial Framed Panel 17 15 /

16

" (456) 67 11 /

16

" (1719)

The partial framed accessory kit (FRAMPAR) is required for this option.

Kit includes partial framed molding and classic stainless steel inset handle panels for above and below glasswell on the refrigerator door.

P A N E L G R I L L E O P T I O N

Framed (F) Models

Models 611 and 611G

Grille Panel Width

Models 650, 650G, 661

Grille Panel Width

Models 642 and 685

Grille Panel Width

W

28 3 /

16

" (716)

W

34 3 /

16

" (868)

W

40 3 /

16

" (1021)

Models 632 and 695

Grille Panel Width

10" (254) Grille

Grille Panel Height

W

46 3 /

16

" (1173)

H

8 15 /

16

" (227)

11" (279) Grille (standard) H

Grille Panel Height 9 15 /

16

" (252)

12" (305) Grille Height

Grille Panel Height

H

10 15 /

16

" (278)

13" (330) Grille

Grille Panel Height

14" (356) Grille

Grille Panel Height

15" (381) Grille

Grille Panel Height

H

11 15 /

16

" (303)

H

12 15 /

16

" (329)

H

13 15 /

16

" (354)

For panel grille insert size, use width dimension listed for your model and height dimension for grille option.

11" (279) grille is standard.

A

14" (356)

H

W W

Models 661, 642 and 632

E

H

F

W W

Models 685 and 695

W W

H

Models 685 and 695

Partial Framed Option

F R A M E D P A N E L S

To install framed panels, see the detailed procedures outlined in the

Sub-Zero Built-In

Installation

Instructions.

21

B U I L T - I N R E F R I G E R A T I O N

P A N E L

R E Q U I R E M E N T S

The overlay door panel assembly must be a minimum of

5 /

8

" (16) thick and cannot exceed 50 lbs

(23 kg).

O V E R L A Y D O O R P A N E L S

If you and your client have ordered an overlay design model, you will be adding panels to give the unit the custom Sub-Zero look. The overlay panel design option is available on all Built-In units except Models 648PRO and 648PROG.

For exact door panel dimensions for Built-In overlay models, refer to the Overlay Panel Specifications on pages 24–25.

The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. To achieve this look, the most common way is to work with three panels—the decorative overlay panel, a 0.10" (3) spacer panel and a 1 /

4

"

(6) backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or, more likely, three different panels.

Regardless of the physical construction of the panels (routing or three-panel assembly), you will need to follow the Overlay Panel Specifications on the following pages for exact sizing and panel placement to ensure a proper fit.

Illustration 3 is a cross section view of the threepanel assembly showing placement of the door, drawer or grille trim. Illustration 4 shows a rear view of the three-panel assembly and critical dimensions, standard for all models.

IMPORTANT NOTE: Keep in mind that the

Sub-Zero door panels have the potential for hitting adjacent cabinets and/or countertops when they are opened. You need to be aware of your surrounding cabinetry and space limitations when using the overlay models. Refer to the fullscale illustrations at the end of this section.

If you are using an overlay door panel with

Model 611, 611G, 650 or 650G, it is necessary to rout a space for the unit‘s lower hinge plate so it does not strike the door panel. Refer to illustration 5.

For Models 611, 611G, 650 and 650G, you will minimize the reveal between the bottom of the overlay door panel and the top of the overlay drawer panel. Refer to illustration 6.

IMPORTANT NOTE: If you choose not to rout a space for the lower hinge plate, you can reduce the total height of the overlay panel (decorative panel only) by 1 /

2

" (13).

Do not exceed the overlay decorative panel dimensions for Models 611, 611G, 650 or

650G listed on page 24. If you try to make the reveal tighter between the door and drawer panels, the panels may hit when opening and closing, causing possible damage to the panels and the Sub-Zero unit.

Spacer Panel

.10"

(3) Overlay Panel

Overlay Panel

Spacer Panel

Illus. 3

1 / 4 " (6) Backer Panel

5 /

16

"

(8) min

5

/ 32 " (4)

1 /

16

"

(2)

Door / Drawer /

Grille Trim

~ 3 /

4

"

(19)

.10"

(3)

1 /

4

"

(6)

Backer

Panel

Illus. 4

22

1/2 "

(13)

3/8 " (10)

Illus. 5

Overlay Panel

1/4 "(6) Backer Panel

Spacer Panel

3" (76)

Bottom Edge –

Hinge Side

(rear view)

Overlay Panel

Spacer Panel

Backer

Panel

5/16 "

(8)

27/32 "

(21) 17/32

(13)

"

Illus. 6

B U I L T - I N R E F R I G E R A T I O N

O V E R L A Y D O O R P A N E L S

For glass door Models 601RG, 611G and 650G, the refrigerator door panel must include a cutout to accommodate the window. Refer to the

Overlay Panel Specifications for Models 601RG,

611G and 650G on page 24.

IMPORTANT NOTE: On glass door models, the glass portion of the door must be exposed and not covered by any part of the panel.

For Models 685 and 695, the refrigerator door panel must include a cut-out to accommodate the glasswell and bezel. The thickness of the panel in this area can range from 1 /

4

" (6) to a maximum of 1 1 /

8

" (29).

IMPORTANT NOTE: Regardless of the thickness of the overlay panel for Model 685 or 695, you must plan for a flat ’landing’ space for the decorative bezel surrounding the glasswell area.

Refer to page 25 for exact cut-out dimensions of the glasswell area in the overlay, spacer and backer panels. This ’landing’ area can be accomplished in a number of different ways. We are showing two in Illustrations 7 and 8 below.

Illustration 7 shows how you can recess the bezel to the inset panel. You must rout out a space to accommodate the 12 7 /

8

" (327) height of the bezel. Also keep in mind that the amount of material you will rout out of the stile will vary because of the thickness of this element.

However, the width of the stile immediately adjacent to the bezel must be 1 7 /

16

" (37). DO

NOT cut the entire stile to this dimension. In this illustration you can see that rails above and below the bezel give this a finished look. Make sure that the bezel is not supporting weight from the panel.

Illustration 8 shows how you can box out a landing space for the bezel using stiles and rails to create this space. Again, keep in mind, that the total thickness of the panel at this level must not exceed 1 1 /

8

" (29).

O V E R L A Y P A N E L G R I L L E

Overlay grille panels for the panel grille match the design of the door panels. Overlay units, except Models 601R, 601RG and 601F, come standard with an 11" (279) panel grille. Optional grilles are available in 1" (25) height increments from 10" (254) to 15" (381). Overlay grille panel specifications for the panel grille are listed on page 25. Also refer to illustration 4 on page 22 for additional overlay panel dimensions.

Do not exceed the panel dimensions listed for the appropriate overlay grille panel you are specifying. The decorative panel cannot be any larger or it may restrict the airflow to the compressor area and cause problems with the operation of the Sub-Zero unit.

O V E R L A Y P A N E L S

To install overlay panels, see the detailed procedures outlined in the

Sub-Zero Built-In

Installation

Instructions.

Routing

Required

1 7 /

16

"

(37)

Width of Stile

Adjacent to Bezel

Illus. 7

Glasswell

Cut-Out

12 7 /

8

"

(327)

Height of Bezel 2"

(51)

Edge of

Panel to

Cut-Out

Illus. 8

Dimensions in parentheses are in millimeters unless otherwise specified.

23

B U I L T - I N R E F R I G E R A T I O N

O V E R L A Y D O O R P A N E L S P E C I F I C A T I O N S

All Refrigerator | All Freezer Overlay (O) Models

Model 601R

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

W H

34 7 /

16

" (875) 59 1 /

4

" (1505)

33 1 /

2

" (851)

34 1 /

8

" (867)

58

58

5 /

16

" (1481)

15 /

16

" (1497)

Model 601RG

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

Window Cut-Out Dimensions

Window Cut-Out Location

Model 601F

Freezer Overlay Panel

Freezer Spacer Panel

Freezer Backer Panel

W H

34 7 /

16

" (875) 59 1 /

4

" (1505)

33 1 /

2

" (851)

34 1 /

8

" (867)

58

58

5 /

16

" (1481)

15 /

16

" (1497)

25 7 /

16

" (646) 41 1 /

4

" (1048)

C) 4 1 /

2

" (114) D) 13 1 /

2

" (343)

W H

34 7 /

16

" (875) 59 1 /

4

" (1505)

33 1 /

2

" (851)

34 1 /

8

" (867)

58 5 /

16

" (1481)

58 15 /

16

" (1497)

IMPORTANT NOTE: Panel specifications are for Built-In overlay (O) models. Panel specifications for framed models are on pages 20–21.

O V E R L A Y D O O R P A N E L S P E C I F I C A T I O N S

Over-and-Under Overlay (O) Models

Model 611

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

Freezer Overlay Panel

Freezer Spacer Panel

Freezer Backer Panel

W H

28 7 /

16

" (722) 48 7 /

8

" (1241)

27 1 /

2

" (699)

28 1 /

8

" (714)

47

48

7

1

/

16

" (1205)

/

16

" (1221)

28 7 /

16

" (722) 18 11 /

16

" (475)

27 1 /

2

" (699)

28 1 /

8

" (714)

17

18

3 /

4

" (451)

3 /

8

" (467)

Model 611G

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

Freezer Overlay Panel

Freezer Spacer Panel

Freezer Backer Panel

Window Cut-Out Dimensions

Window Cut-Out Location

Model 650

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

Freezer Overlay Panel

Freezer Spacer Panel

Freezer Backer Panel

W H

28 7 /

16

" (722) 48 7 /

8

" (1241)

27 1 /

2

" (699)

28 1 /

8

" (714)

47 7 /

16

" (1205)

48 1 /

16

" (1221)

28 7 /

16

" (722) 18 11 /

16

" (475)

27 1 /

2

" (699)

28 1 /

8

" (714)

17

18

3

3

/

4

" (451)

/

8

" (467)

19 7 /

16

" (494) 39 3 /

8

" (1000)

C) 4 1 /

2

" (114) D) 5" (127)

W H

34 7 /

16

" (875) 48 7 /

8

" (1241)

33 1 /

2

" (851) 47 7 /

16

" (1205)

34 1 /

8

" (867) 48 1 /

16

" (1221)

34 7 /

16

" (875) 18 11 /

16

" (475)

33 1 /

2

" (851)

34 1 /

8

" (867)

17

18

3

3

/

4

" (451)

/

8

" (467)

Model 650G

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

Freezer Overlay Panel

Freezer Spacer Panel

Freezer Backer Panel

Window Cut-Out Dimensions

Window Cut-Out Location

W

34 7 /

16

" (875) 48 7 /

8

" (1241)

33 1 /

2

" (851)

34 1 /

8

" (867)

34

33 1 /

2

" (851)

34 1 /

8

" (867)

25

7 /

16

" (875) 18 11 /

16

" (475)

7

C) 4

/

16

" (646)

H

47 7 /

16

" (1205)

48 1 /

16

" (1221)

17

18

39

3

3

3

/

4

" (451)

/

8

" (467)

/

8

" (1000)

1 /

2

" (114) D) 5" (127)

IMPORTANT NOTE: Panel specifications are for Built-In overlay (O) models. Panel specifications for framed models are on pages 20–21.

O V E R L A Y P A N E L S

Panel specifications are for Built-In overlay (O) models.

Dimensions in parentheses are in millimeters unless otherwise specified.

24

W

Models 601R and 601F

H

C

C

C

H

C

C

C

H

H

D

W

Model 601RG

D

H

W

Models 611 and 650

H

W

Models 611G and

650G

B U I L T - I N R E F R I G E R A T I O N

O V E R L A Y D O O R P A N E L S P E C I F I C A T I O N S

Side-by-Side Overlay (O) Models

Model 661

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

Freezer Overlay Panel

Freezer Spacer Panel

Freezer Backer Panel

Models 642 and 685

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

Freezer Overlay Panel

Freezer Spacer Panel

Freezer Backer Panel

W H

19 7 /

16

" (494) 68" (1727)

18 1 /

2

" (470)

19 1 /

8

" (486)

67 1 /

16

" (1703)

67 11 /

16

" (1719)

14 15 /

16

" (379) 68" (1727)

14" (356) 67 1 /

16

" (1703)

14 5 /

8

" (371) 67 11 /

16

" (1719)

W H

24 5 /

16

" (618) 68" (1727)

23 3 /

8

" (594)

24" (610)

67 1 /

16

" (1703)

67 11 /

16

" (1719)

15 15 /

16

" (405) 68" (1727)

15" (381) 67 1 /

16

" (1703)

15 5 /

8

" (397) 67 11 /

16

" (1719)

Models 632 and 695

Refrigerator Overlay Panel

Refrigerator Spacer Panel

Refrigerator Backer Panel

Freezer Overlay Panel

Freezer Spacer Panel

Freezer Backer Panel

W H

28" (711) 68" (1727)

27 1 /

16

" (687) 67 1 /

16

" (1703)

27 11 /

16

" (703) 67 11 /

16

" (1719)

18 1 /

4

" (464) 68" (1727)

17 5 /

16

" (440) 67 1 /

16

" (1703)

17 15 /

16

" (456) 67 11 /

16

" (1719)

Glasswell Cut-Out –

Models 685 and 695

Glasswell Cut-Out Dimensions

Glasswell Location (Overlay)

Glasswell Location (Spacer)

Glasswell Location (Backer)

W

5 7 /

8

" (150)

H

12 7 /

16

" (315)

E) 1 11 /

16

" (43) F) 28 3 /

4

" (730)

E) 1 1 /

4

" (31) F) 28 1 /

4

" (718)

E) 1 9 /

16

" (39) F) 28 9 /

16

" (726)

IMPORTANT NOTE: Panel specifications are for Built-In overlay (O) models. Panel specifications for framed models are on pages 20–21.

For Models 685 and 695, panel thickness in the glasswell area can range from 1 /

4

" (6) to a maximum of 1 1 /

8

" (29). If the panel is thicker, you must rout out a minimum 1 /

4

" (6) flat landing area to accommodate the bezel surrounding the glasswell.

H

E

F

H

O V E R L A Y G R I L L E P A N E L

Overlay (O) Models

Width Dimensions

Models 611 and 611G

Overlay Panel Width

Spacer Panel Width

Backer Panel Width

W

28 7 /

16

" (722)

27 1 /

2

" (699)

28 1 /

8

" (714)

Models 650, 650G, 661

Overlay Panel Width

Spacer Panel Width

Backer Panel Width

W

34 7 /

16

" (875)

33 1 /

2

" (851)

34 1 /

8

" (867)

Models 642 and 685

Overlay Panel Width

Spacer Panel Width

Backer Panel Width

Models 632 and 695

Overlay Panel Width

Spacer Panel Width

Backer Panel Width

W

40 7 /

16

" (1027)

39 1 /

2

" (1003)

40 1 /

8

" (1019)

W

46 7 /

16

" (1180)

45 1 /

2

" (1156)

46 1 /

8

" (1172)

Height Dimensions

10" (254) Grille H

Overlay Panel Height

Spacer Panel Height

Backer Panel Height

9 1 /

4

" (235)

8 5 /

16

" (211)

8 15 /

16

" (227)

11" (279) Grille (standard) H

Overlay Panel Height 10 1 /

4

" (260)

Spacer Panel Height

Backer Panel Height

9 5 /

16

" (237)

9 15 /

16

" (252)

12" (305) Grille Height

Overlay Panel Height

Spacer Panel Height

Backer Panel Height

H

11 1 /

4

" (286)

10 5 /

16

" (262)

10 15 /

16

" (278)

13" (330) Grille

Overlay Panel Height

Spacer Panel Height

Backer Panel Height

14" (356) Grille

Overlay Panel Height

Spacer Panel Height

Backer Panel Height

15" (381) Grille

Overlay Panel Height

Spacer Panel Height

Backer Panel Height

H

12

11

11

H

13 1 /

4

" (337)

12 5 /

16

" (313)

12 15 /

16

" (329)

H

14

13

13

1 /

4

" (311)

5 /

16

" (287)

15 /

16

" (303)

1 /

4

" (362)

5 /

15

16

" (338)

/

16

" (354)

For grille panel size, use width dimensions listed for your model and height dimensions for grille option. 11" (279) grille is standard.

Panel grille is available for all overlay units except Models 601R, 601RG and 601F.

O V E R L A Y P A N E L S

To install overlay panels, see the detailed procedures outlined in the

Sub-Zero Built-In

Installation

Instructions.

W W

Models 661, 642 and 632

W W

Models 685 and 695

25

B U I L T - I N R E F R I G E R A T I O N

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

H A N D L E H A R D W A R E

Overlay models come without handle hardware.

The beauty of this design is that you can match the surrounding cabinet hardware. You or the cabinet manufacturer must provide handle hardware to match the overall decorating scheme.

The handle hardware must be installed before installing the panel assembly. Use larger D-style handles. If screws with thick heads are used, the screws will need to be countersunk into the door before the panel is put into place.

IMPORTANT NOTE: Sub-Zero does not recommend using single pull knobs on any of its Built-

In models.

For overlay Models 685 and 695, mounting placement of the refrigerator door handle must assure proper access to the glasswell and adequate clearance under the handle. Illustration

9 shows placement of the refrigerator door handle in relationship to the glasswell bezel on stainless steel models.

Optional stainless steel handles are available in a variety of diameters and lengths, as are handles to match the color and style of Wolf ovens.

Contact your Sub-Zero dealer for specifics.

Refer to the full-scale illustrations at the end of this section for handle hardware considerations.

S I D E P A N E L S

Side panels can be used with the framed, overlay and stainless steel design applications.

When planning for side panels with the installation of a Built-In model, you need to be aware of space configuration to achieve a pleasing fit.

Depending on the exact panel you are using with your unit, the height of the panel will vary.

Cut-outs around the toe kick and grille area are required if a 1 /

4

" (6) thick panel will be inserted into the main frame channel. The panel will need to be 24" (610) deep. If a 3 /

8

" (10) thick panel is used, the panel will abut the main frame and should be 23 7 /

8

" (606) deep. Refer to illustrations 10–12 below for placement of toe kick and grille area cut-outs for your specific model.

These dimensions do not apply to Models

648PRO and 648PROG.

The toe kick area may or may not be cut out depending on the look you want to achieve.

IMPORTANT NOTE: The use of side panels may change the width of your rough opening.

13 1 / 4 " (337)

1 /

4

"

(6)

23 7 / 8 " (606)

BEHIND FRAME

13 1 / 4 " (337)

1 /

4

"

(6)

23 7 / 8 " (606)

BEHIND FRAME

1"

(25)

2"

(51)

Glasswell

Profile

Handle

Profile

Illus. 9

23 7 / 8 " (606)

BEHIND FRAME

4" (102)

3"

(76)

Illus. 10 —Models 601R,

601RG and 601F

4" (102)

3"

(76)

Illus. 11 —Models 611, 611G,

650 and 650G

1 / 4 " (6)

4" (102)

3" (76)

3"

(76)

Illus. 12—Models 661, 642, 632,

685 and 695

26

B U I L T - I N R E F R I G E R A T I O N

P A N E L A N D H A N D L E P R O F I L E – F R A M E D A P P L I C A T I O N

OPTIONAL

EXTENDED

FULL-LENGTH

HANDLE

STANDARD

FULL-LENGTH

HANDLE

1"

(25)

2"

(51)

1 / 4 " (6) FRAMED PANEL

3"

(76)

1 1 / 4 " (32) PANEL

1" (25) PANEL

3 / 4 " (19) PANEL

1 / 2 " (13) PANEL

1 / 4 " (6) PANEL

DOOR

F U L L - S C A L E

T E M P L A T E S

The full-scale illustrations on the following pages enable you to understand some of the unique situations you may face as you plan for the installation of the Built-In models. Use these illustrations as templates for panel and handle hardware considerations.

The full-scale illustration above shows handle placement for the framed application standard full-length handle and the optional extended full-length handle shown in the dashed line.

Dimensions in parentheses are in millimeters unless otherwise specified.

27

B U I L T - I N R E F R I G E R A T I O N

P A N E L A N D H A N D L E P R O F I L E – O V E R L A Y A N D S T A I N L E S S S T E E L A P P L I C A T I O N

STANDARD STAINLESS STEEL HANDLE

1"

2"

(51)

3"

(76)

1 1 / 4 " (32) PANEL

1" (25) PANEL

3 / 4 " (19) PANEL

5 / 8 " (16) PANEL

1 / 2 " (13) PANEL

1 / 4 " (6) PANEL

1 / 4 " (6) APPROXIMATE THICKNESS OF WRAPPED STAINLESS STEEL DOOR

DOOR

NOTE: FOR OVERLAY APPLICATIONS, OPTIONAL STAINLESS STEEL HANDLE

MUST BE MOUNTED ON PANEL MINIMUM 5/8" (16) THICK.

Dimensions in parentheses are in millimeters unless otherwise specified.

The full-scale illustration above shows handle placement for the standard stainless steel handle on the wrapped stainless steel door and on overlay panel applications shown in the dashed line.

IMPORTANT NOTE: For overlay applications, the panel must be a minimum of

5 /

8

" (16) thick to support mounting the handle hardware.

For overlay applications, mount door handles close to the opening edge of the door for ease of opening.

28

B U I L T - I N R E F R I G E R A T I O N

P A N E L A N D H A N D L E P R O F I L E – 1 3 0 ˚ D O O R O P E N I N G ( T O P V I E W )

The full-scale illustration shows the panel and handle profile for 130˚ door opening with a 2" (51) filler strip.

Interference of door panels with handles at maximum door swing may require the use of an optional 90˚ door stop available through your Sub-Zero dealer.

SUB-ZERO UNIT

130˚ DOOR OPENING

WITH 2" (51) FILLER STRIP

(TOP VIEW)

SUB-ZERO UNIT

DOOR CLOSED

FILLER STRIP

2" (51)

ALLOW FOR FILLER LAP

BEHIND FLANGE

MAIN FRAME

APPROX

PROFILE OF

STAINLESS

STEEL DOOR

AND HANDLE

STANDARD

FRAMED

FULL-LENGTH

HANDLE

PANEL

1

1

/ 4

"

(32)

1"

(25)

PANEL

PA

NEL

3

/ 4

"

(19)

1

/ 2

"

(13)

PANEL

/ 4

"

(6)

*

1

PANEL

OPTIONAL

FRAMED EXTENDED

FULL-LENGTH HANDLE

DOOR OPEN @ 130˚

OVERLAY PANEL

3/4" (19) THICK

(NOMINAL)

HINGE

*Approximate thickness of wrapped stainless steel door.

29

2" (51)

2 1 / 4 " (57)

2 1 / 2 " (63)

2 3 / 4 " (70)

3" (76)

3 1 / 4 " (83)

3 1 / 2 " (89)

0" (0)

1 / 4 " (6)

1 / 2 " (13)

3 / 4 " (19)

1" (25)

1 1 / 4 " (32)

1 1 / 2 " (38)

1 3 / 4 " (44)

B U I L T - I N R E F R I G E R A T I O N

O V E R L A Y P A N E L A P P L I C A T I O N – 9 0 ˚ D O O R O P E N I N G ( T O P V I E W )

The full-scale illustration shows what considerations you need to make for overlay panel applications and how they may interact with adjacent cabinets and

(TOP VIEW)

NOMINAL OVERALL

WIDTH OF SUB-ZERO

SUB-ZERO UNIT

23 7 / 8 " (606) TO REAR

OF SUB-ZERO

MAIN FRAME

HINGE

DOOR OPEN @ 90˚

DOOR CLOSED

30

OVERLAY PANEL

3/4" (19) THICK (NOMINAL)

Dimensions in parentheses are in millimeters unless otherwise specified.

*Approximate thickness of wrapped stainless steel door.

I N T E G R A T E D R E F R I G E R A T I O N

I N T E G R A T E D R E F R I G E R A T I O N

For generations, the Sub-Zero name has been synonymous with built-in refrigeration. With the

Integrated line, we have taken the idea a step further—refrigerators and freezers you can hide anywhere in the house, inside the furniture or cabinetry of your choosing.

Created to blend invisibly into your home‘s decor, the Integrated line lets you integrate refrigeration into the kitchen, master suite, media room or workout room. Available as tall units or two-drawer base units, the Integrated line expands the possibilities for the way you shape your home.

Tall units are 80" (2032) high and offered in two different widths—27" (686) and 36" (914). The

27" (686) wide tall unit can be ordered as an all refrigerator, all freezer or combination refrigerator

(upper cabinet) and freezer (drawers). The 36"

(914) wide tall unit is offered as an all refrigerator or combination unit. All of these models are

24" (610) deep.

Base units are offered in the 27" (686) width only. They can be ordered as an all refrigerator, all freezer or combination refrigerator (top drawer) and freezer (bottom drawer). Base units are 34 1 /

2

" (876) high and 24" (610) deep.

You just need to add whatever beautiful cabinetry you want to use. Optional stainless steel panels with tubular handles are offered in the classic, platinum and carbon stainless steel finishes and are ordered and shipped as sales accessories. There are some size limitations on the premium finishes of platinum and carbon stainless steel.

For information regarding specific Integrated models, refer to the illustrations in this section.

A L L R E F R I G E R A T O R | A L L F R E E Z E R

27"

(686)

27"

(686)

80"

(2032)

M O D E L 7 0 0 T R

All Refrigerator

M O D E L 7 0 0 T F ( I )

All Freezer

O V E R - A N D - U N D E R

27"

(686)

36"

(914)

M O D E L 7 3 6 T R

All Refrigerator

80"

(2032)

80"

(2032)

80"

(2032)

80"

(2032)

NEW

36"

(914)

M O D E L 7 0 0 T C ( I )

Refrigerator | Freezer

M O D E L 7 3 6 T C ( I )

Refrigerator | Freezer

D R A W E R S

27"

(686)

34 1 / 2

"

(876)

34 1 / 2

"

(876)

27"

(686)

34 1 / 2

"

(876)

27"

(686)

M O D E L 7 0 0 B R

All Refrigerator

Energy Star

Qualified

M O D E L 7 0 0 B F ( I )

All Freezer

M O D E L 7 0 0 B C ( I )

Refrigerator | Freezer

Comprehensive installation instructions are shipped with each model. Refer to those instructions in preparing and installing all

Sub-Zero products. The instructions can also be found on our website, subzero.com.

With the installation of a harness kit, tall models are Star-K compliant to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org. Drawer models are

Star-K certified from the factory with no extra wiring harness required. For details about the harness kit, contact your Sub-Zero dealer.

31

I N T E G R A T E D R E F R I G E R A T I O N

M O D E L 7 0 0 T R

A L L R E F R I G E R A T O R

M O D E L 7 3 6 T R

A L L R E F R I G E R A T O R

NEW M O D E L 7 0 0 T F

A L L F R E E Z E R

M O D E L O P T I O N S

Automatic Ice Maker 700TFI

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Drawer Clearance

Annual Energy Usage

Shipping Weight

27" (686)

80" (2032)

24" (610)

15.5 cu ft (439 L)

79 1 /

2

" (2019)

25 1 /

2

" (648)

LH or RH

19 1 /

2

" (495)

425 kWh | $39*

360 lbs (163 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Drawer Clearance

Annual Energy Usage

Shipping Weight

36" (914)

80" (2032)

24" (610)

20.9 cu ft (592 L)

79 1 /

2

" (2019)

34 1 /

2

" (876)

LH or RH

19 1 /

2

" (495)

478 kWh | $44*

480 lbs (218 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Freezer Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Drawer Clearance

Annual Energy Usage

Shipping Weight

27" (686)

80" (2032)

24" (610)

15.3 cu ft (433 L)

79 1 /

2

" (2019)

25 1 /

2

" (648)

LH or RH

19 1 /

2

" (495)

652 kWh | $60*

360 lbs (163 kg)

R E F R I G E R A T O R F E A T U R E S

Dual Refrigeration

2 Temperature Zones

3 Adjustable Glass Shelves

1 Stationary Shelf

2 Storage Drawers

Removable Crisper Cover

2 Removable Drawer Dividers

Adjustable Deli Drawer

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)**

R E F R I G E R A T O R F E A T U R E S

Dual Refrigeration

2 Temperature Zones

3 Adjustable Glass Shelves

1 Stationary Shelf

2 Storage Drawers

Removable Crisper Cover

4 Removable Drawer Dividers

Adjustable Deli Drawer

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)**

F R E E Z E R F E A T U R E S

1 Temperature Zone

3 Adjustable Glass Shelves

1 Stationary Shelf

2 Storage Drawers

2 Removable Drawer Dividers (700TF)

1 Removable Drawer Divider (700TFI)

4 Adjustable Door Shelves

Automatic Defrost

Automatic Ice Maker Model 700TFI

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)**

M O D E L 7 0 0 T R

32

M O D E L 7 3 6 T R M O D E L 7 0 0 T F ( I )

I N T E G R A T E D R E F R I G E R A T I O N

M O D E L 7 0 0 T C

O V E R - A N D - U N D E R

M O D E L 7 3 6 T C

O V E R - A N D - U N D E R

M O D E L O P T I O N S

Automatic Ice Maker 700TCI

M O D E L O P T I O N S

Automatic Ice Maker 736TCI

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Drawer Clearance

Annual Energy Usage

Shipping Weight

27" (686)

80" (2032)

24" (610)

10.2 cu ft (289 L)

5.1 cu ft (144 L)

79 1 /

2

" (2019)

25 1 /

2

" (648)

LH or RH

19 1 /

2

" (495)

540 kWh | $49*

360 lbs (163 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Drawer Clearance

Annual Energy Usage

Shipping Weight

36" (914)

80" (2032)

24" (610)

13.3 cu ft (377 L)

7.1 cu ft (201 L)

79 1 /

2

" (2019)

34 1 /

2

" (876)

LH or RH

19 1 /

2

" (495)

569 kWh | $52*

480 lbs (218 kg)

R E F R I G E R A T O R ( D O O R )

Dual Refrigeration

3 Adjustable Glass Shelves

1 Stationary Shelf

Adjustable Deli Drawer

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R ( D R A W E R S )

2 Removable Drawer Dividers (700TC)

1 Removable Drawer Divider (700TCI)

Automatic Defrost

Automatic Ice Maker (700TCI)

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)**

R E F R I G E R A T O R ( D O O R )

Dual Refrigeration

3 Adjustable Glass Shelves

1 Stationary Shelf

High-Humidity Crisper Drawer with Dividers

3 Adjustable Door Shelves

Adjustable Dairy Compartment

Egg Container

F R E E Z E R ( D R A W E R S )

2 Removable Drawer Dividers (736TC)

1 Removable Drawer Divider (736TCI)

Automatic Defrost

Automatic Ice Maker (736TCI)

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)**

*Annual energy costs are based on

9.06 cents per kilowatt hour.

**Optional stainless steel panels and handles are ordered and shipped as sales accessories. For additional information on panel and handle sizes and applications, check our website, subzero.com.

A C C E S S O R I E S

Contact your Sub-Zero Dealer

Classic stainless steel front panels—platinum and carbon available in certain sizes

Tubular handles in classic, platinum and carbon stainless steel

High-humidity crisper drawer and shelf assembly*

Adjustable deli drawer and shelf assembly*

Crisper cover with lid*

Dozen egg container with lid*

Dual installation heater kit

Harness kit for Star-K compliance

*Accessory is not available for every model.

M O D E L 7 0 0 T C ( I ) M O D E L 7 3 6 T C ( I ) Dimensions in parentheses are in millimeters unless otherwise specified.

33

I N T E G R A T E D R E F R I G E R A T I O N

M O D E L 7 0 0 B R

R E F R I G E R A T O R D R A W E R S

Energy Star Qualified

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Min Height Required

Drawer Clearance

Annual Energy Usage

Shipping Weight

27" (686)

34 1 /

2

" (876)

24" (610)

5.3 cu ft (150 L)

34" (864)

19 1 /

2

" (495)

337 kWh | $31*

190 lbs (86 kg)

R E F R I G E R A T O R F E A T U R E S

1 Temperature Zone

2 Storage Drawers

Removable Crisper Cover

2 Removable Drawer Dividers

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)**

M O D E L 7 0 0 B F

F R E E Z E R D R A W E R S

M O D E L O P T I O N S

Automatic Ice Maker 700BFI

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Freezer Capacity

Min Height Required

Drawer Clearance

Annual Energy Usage

Shipping Weight

27" (686)

34 1 /

2

" (876)

24" (610)

5.1 cu ft (144 L)

34" (864)

19 1 /

2

" (495)

488 kWh | $45*

190 lbs (86 kg)

F R E E Z E R F E A T U R E S

1 Temperature Zone

2 Storage Drawers

2 Removable Drawer Dividers (700BF)

1 Removable Drawer Divider (700BFI)

Automatic Defrost

Automatic Ice Maker (700BFI)

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)**

M O D E L 7 0 0 B C

R E F R I G E R A T O R

D R A W E R S

| F R E E Z E R

M O D E L O P T I O N S

Automatic Ice Maker 700BCI

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Min Height Required

Drawer Clearance

Annual Energy Usage

Shipping Weight

27" (686)

34 1 /

2

" (876)

24" (610)

2.9 cu ft (82 L)

2.1 cu ft (59 L)

34" (864)

19 1 /

2

" (495)

448 kWh | $41*

190 lbs (86 kg)

F E A T U R E S

2 Temperature Zones

2 Storage Drawers

Removable Crisper Cover

1 Removable Drawer Divider (700BC)

Automatic Ice Maker (700BCI)

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)**

M O D E L 7 0 0 B R

*Annual energy costs are based on

9.06 cents per kilowatt hour.

**Optional stainless steel panels and handles are ordered and shipped as sales accessories. For additional information on panel and handle sizes and applications, check our website, subzero.com.

Dimensions in parentheses are in millimeters unless otherwise specified.

34

M O D E L 7 0 0 B F ( I )

A C C E S S O R I E S

Contact your Sub-Zero Dealer

Front panels in classic, platinum and carbon stainless steel

Tubular handles in classic, platinum and carbon stainless steel

Crisper cover with lid*

Dozen egg container with lid*

Dual installation heater kit

*Accessory is not available for every model.

M O D E L 7 0 0 B C ( I )

I N T E G R A T E D R E F R I G E R A T I O N

I N T E G R A T E D F E A T U R E S

All Integrated models accept wood or stainless steel panels. The optional stainless steel panels and handles are available in classic, platinum and carbon stainless steel finishes at the 80" (2032) height, and only classic stainless steel at the 84"

(2134) height. Stainless steel panels are ordered and shipped as sales accessories.

Functional Design. These models can be placed anywhere in the home. Think about “point-ofuse refrigeration” when planning where to place your units.

Integrated Design. All Sub-Zero models are 24"

(610) deep. Tall Integrated units are 80" (2032) high and are offered in two different widths—

27" (686) and 36" (914). All base units are 27"

(686) wide and 34 1 /

2

" (876) high.

Microprocessor. The “brains” of the Integrated units, this computer allows the best in temperature control, efficiency and food preservation.

Temperature Zones. On tall refrigerator and combination units, you have the flexibility of having two temperatures within the same unit.

Automatic Defrost. Depending on usage and exact climate, the Integrated unit will adapt to the unique situation and adjust accordingly to offer greater efficiency. Integrated freezer and combination units have an automatic defrost system.

Kickplate. The adjustable solid kickplate meets standards of the American Institute of Architects. The toe kick area for a solid, decorative kickplate is 4" (102) high by 3" (76) deep. You can show a 10" (254) toe kick, but you cannot cover the louvers of the kickplate. If you choose, the kickplate can be painted.

Front Venting. All models have the mechanical equipment in an area below the lower drawer.

The lower drawer panel can extend to cover these louvers, but a removable decorative kickplate cannot cover the fins.

Lighting. Flat to the ceiling, superior lighting provides white, efficient light in cabinet and drawer units.

Door / Drawer Alarm. When activated, if your door or drawer is accidentally left open for more than 30 seconds, an audible alarm will sound.

Spill-Proof Shelves. The cabinet section of the tall units features adjustable spill-proof one-piece glass shelves that are easily removed for cleaning.

Dairy Shelf. This magnetically sealed compartment is fully adjustable on the tall refrigerator and combination units.

Crisper Cover. On the tall and base refrigerator units and the base combination unit, a removable crisper cover is offered for one of the drawer sections.

Deli Drawer. Smaller items are not lost in this handy feature of the Models 700TR and 700TC(I).

Available as a sales accessory for Model 736TC(I).

Crisper—Model 736TC(I). Model 736TC(I) is equipped with a sealed crisper. It is large and deep, with smooth sides for easy cleaning. The space features removable dividers.

Egg Container. You can store a dozen eggs in this removable egg container with lid in the tall refrigerator and tall combination units.

Ice Maker. An automatic ice maker, providing crescent-shaped ice, is available as an option on the tall and base freezers as well as the tall and base combination units. This optional equipment must be factory installed.

Door Swing. You can choose left or right door swing on the tall units. This option must be ordered when requesting the unit. You cannot reverse the door in the field.

Dual-Action Hinge. An exclusive dual-action hinge is featured on all of the tall units, allowing for a fully integrated look.

Door Stop. On all of the tall units, a 90˚ door stop is built in to the hinge. Normal door swing is 105˚.

Temperature Zones. With the microprocessor in the Integrated models, you have the capability of setting different optimum temperatures.

S U B - Z E R O

W A R R A N T Y

Sub-Zero products are covered by a two, five and twelve year residential warranty (exclusions apply). See warranty details at the end of this guide.

T E M P E R A T U R E Z O N E S

Model 700BR – One zone,

34˚F (1˚C) to 45˚F (7˚C)

Models 700TR and 736TR –

Two zones, 34˚F (1˚C) to 45˚F (7˚C)

Models 700BF(I) and 700TF(I) –

One zone, -5˚F (-21˚C) to +5˚F (-15˚C)

Model 700TF(I) – One zone,

-5˚F (-21˚C) to +5˚F (-15˚C)

Model 700BC(I) – Two zones,

34˚F (1˚C) to 45˚F (7˚C) top drawer;

-5˚F (-21˚C) to +5˚F (-15˚C) bottom drawer

Models 700TC(I) and 736TC(I) –

Two zones, 34˚F (1˚C) to 45˚F (7˚C) cabinet; -5˚F (-21˚C) to +5˚F (-15˚C) drawers

35

Dimensions in parentheses are in millimeters unless otherwise specified.

36

I N T E G R A T E D R E F R I G E R A T I O N

P L A N N I N G I N F O R M A T I O N

Before moving the Integrated unit into place, be sure that the finished opening dimensions, electrical and plumbing locations and minimum door and drawer clearances are accurate. Refer to the

Installation Specifications illustration for your model on the following pages. Be sure your installer has this information before finishing work is completed.

Integrated models without an automatic ice maker will not require the plumbing connections shown in the illustrations.

The height of the tall unit is set at 80" (2032).

You can allow the top of the door panel to exceed this dimension with caution. If you are working with 84" (2134) or 96" (2438) neighboring panels, you can utilize door panels to match this height. Other critical dimensions regarding the door swing, drawer openings and toe kick clearance are noted in the Overall Dimensions illustrations on the following pages. Also refer to the full-scale illustrations at the end of this section for specifics on door openings and other specifications.

IMPORTANT NOTE: The anti-tip bracket must be installed to prevent the unit from tipping forward.

E L E C T R I C A L R E Q U I R E M E N T S

A 115 V AC, 60 Hz, 15 amp circuit breaker and electrical supply are required. A separate circuit, servicing each base and tall unit, is required.

All Sub-Zero Integrated models are equipped with a power supply cord with a 3-prong grounding plug, which must be plugged into a mating 3-prong grounding-type wall receptacle.

Follow the National Electrical Code and local codes and ordinances when installing the receptacle.

IMPORTANT NOTE: The electrical outlet must be placed so the grounding prong is to the right of the thinner blades. The outlet must be flush with the back wall. Refer to the Installation

Specifications illustration for your model for exact placement.

IMPORTANT NOTE: A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Do not use an extension cord or 2-prong adapter. Electrical ground is required.

Do not under any circumstances remove the power supply cord ground prong.

P L U M B I N G C O N S I D E R A T I O N S

For models with an automatic ice maker, rough in the water supply line. Connect a 1 /

4

" OD copper line to the house supply, being sure to use an easily accessible shut-off valve between the supply and the unit. This shut-off valve should not be installed behind the unit.

Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. An in-line filter is required when water conditions have a high sediment content. The ice maker operates on constant water pressure between 20 psi (1.4 bar) and 100 psi (6.9 bar).

IMPORTANT NOTE: In some cases, a reverse osmosis water filter system may not be able to maintain the minimum pressure consistently.

The Installation Specifications illustration for your model on the following pages shows the precise placement of the water line. When routing the water through the side walls, you must place the water line within 1 /

2

" (13) of the floor and as close as possible to the back wall.

The line must be routed around the anti-tip bracket so it clears the bracket and the leveling feet of the unit as shown in the top view of the illustration. Regardless of the routing, allow for

27" (686) of excess copper tubing to remain outside the wall or floor for easy connection to the unit.

IMPORTANT NOTE: Do not route water supply line in front of the compressor tray. The tray must be slid forward for service.

I N T E G R A T E D R E F R I G E R A T I O N

O V E R A L L D I M E N S I O N S

Models 700TR, 700TF(I) and 700TC(I)

27"

(686)

(UNIT DIMENSION)

14" (356)

TOP OF

ROUGH

OPENING

13 / 16 "

(21)

DOOR

MOUNTING

DETAIL

3 / 8 "

(10)

78 9 / 16 "*

(1995)

1 / 2 "

(13)

13 1 / 4 "

(337)

DRAWER

MOUNTING DETAIL

10 1 / 4 "

(260)

20 3 / 8 "

(518)

34

1

/ 2 "*

(876)

9 3 / 4 "

(248)

4"

(102) SIDE VIEW

*

1 / 2 " (13) +

FRONT VIEW

DOOR / DRAWER

CLOSED

90˚

25 7 / 8 " (657)

4 5 / 8 "* (117)

MAXIMUM DOOR OPENING 90˚ DOOR OPENING

TOP VIEW

* DOOR / DRAWER PANEL THICKNESS NOT INCLUDED – DIMENSION WILL VARY WITH INSTALLATION

I N S T A L L A T I O N

S P E C I F I C A T I O N S

Models 700TR, 700TF(I) and 700TC(I)

TOP VIEW

Models without an ice maker will not require the water line connection.

25"

(635)

1 1 /

2

"

(38)

ANTI-TIP

BRACKET*

13 1 /

2

"

(343)

15

1

/ 2 "

(394)

9"

(229)

WATER LINE

BOTTOM ENTRY

LOCATION

*PLACEMENT OF THE

ANTI-TIP BRACKET

SHOULD BE 24" (610)

FROM THE FRONT OF THE

UNIT WITHOUT PANELS

TO THE BACK OF THE

ANTI-TIP BRACKET.

27"

(686)

6"

(152)

27"

(686)

1 1 /

2

(38)

"

4 1 / 2 "

(114)

1 /

4

"

(6)

13"

(330)

2 1 / 2 " (64)

15 1 / 2 " (394)

80"*

(2032)

9"

(229)

NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO

PREVENT UNIT FROM TIPPING FORWARD

24"

(610)

(UNIT DIMENSION)

LOCATE ELECTRICAL WITHIN

SHADED AREA – ORIENT GROUND

PRONG TO RIGHT AS SHOWN

ANTI-TIP

BRACKET

LOCATE WATER LINE

(REAR ENTRY) WITHIN

SHADED AREA

3 /

4

"

(19)

3"

(76)

FRONT VIEW

80"

(2032)

24"

(610)

25 1 / 2 "*

19 1 / 2 "*

(495)

(648)

TOP VIEW

ANTI-TIP

BRACKET

13 1 /

2

"

(343)

WATER LINE

SIDE ENTRY

LOCATIONS

27"

(686)

25"

(635)

DOOR / DRAWER

CLOSED

105˚

1 1 /

2

(38)

"

ANTI-TIP

BRACKET

SIDE VIEW

WATER LINE

SIDE ENTRY

LOCATION

A L L R E F R I G E R A T O R

A L L F R E E Z E R

Model 700TR

All Refrigerator

Model 700TF

All Freezer

Model 700TFI

All Freezer with Ice Maker

O V E R - A N D - U N D E R

Refrigerator | Freezer

Model 700TC

Model 700TCI with Ice Maker

M O D E L 7 0 0 T R

M O D E L 7 0 0 T F ( I )

M O D E L 7 0 0 T C ( I )

Overall Dimensions

Width 27" (686)

Height 80" (2032)

Depth 24" (610)

Finished Opening

Width 27" (686)

Height 80" (2032)

Depth 25" (635)*

*The depth of the unit is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635).

Refer to installation instructions shipped with each Wolf product for detailed specifications.

37

I N T E G R A T E D R E F R I G E R A T I O N

A L L R E F R I G E R A T O R

O V E R A L L D I M E N S I O N S

Models 736TR and 736TC(I)

36"

(914)

(UNIT DIMENSION)

14" (356)

TOP OF

ROUGH

OPENING

1 5 / 16 "

(33)

Model 736TR

All Refrigerator DOOR MOUNTING

DETAIL

80"*

(2032)

O V E R - A N D - U N D E R

Refrigerator | Freezer

Model 736TC

Model 736TCI with Ice Maker

3 / 8 "

(10)

1 / 2 "

(13)

13 1 / 4 "

(337)

DRAWER MOUNTING

DETAIL

77 13 / 16 "*

(1976)

34 1 /

2

"*

(876) 10 1 / 4 "

(260)

20 3 / 8 "

(518)

*

1 / 2 " (13) +

FRONT VIEW

24"

(610)

(UNIT DIMENSION)

9 3 / 4 "

(248)

4"

(102) SIDE VIEW

DOOR / DRAWER

CLOSED

90˚

24"

(610)

34

1

/ 2 "*

19 1 / 2 "*

(495)

(876)

DOOR / DRAWER

CLOSED

105˚

34

7

/ 8 " (886)

90˚ DOOR OPENING MAXIMUM DOOR OPENING

TOP VIEW

* DOOR / DRAWER PANEL THICKNESS NOT INCLUDED – DIMENSION WILL VARY WITH INSTALLATION

7"*

(178)

M O D E L 7 3 6 T R

M O D E L 7 3 6 T C ( I )

Overall Dimensions

Width 36" (914)

Height 80" (2032)

Depth 24" (610)

Finished Opening

Width 36" (914)

Height 80" (2032)

Depth 25" (635)*

*The depth of the unit is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635).

I N S T A L L A T I O N

S P E C I F I C A T I O N S

Models 736TR and 736TC(I)

Models without an ice maker will not require the water line connection.

25"

(635)

1 1 / 2 "

(38)

ANTI-TIP

BRACKET*

18" (457)

TOP VIEW TOP VIEW

6"

(152)

27"

(686)

18" (457)

20" (508) 13 1 / 2 "

(343)

WATER LINE

BOTTOM ENTRY

LOCATION

WATER LINE

SIDE ENTRY

LOCATIONS

ANTI-TIP

BRACKET

1 1 / 2 "

(38)

*PLACEMENT OF THE

ANTI-TIP BRACKET

SHOULD BE 24" (610)

FROM THE FRONT OF THE

UNIT WITHOUT PANELS

TO THE BACK OF THE

ANTI-TIP BRACKET.

36"

(914)

25"

(635)

LOCATE ELECTRICAL WITHIN

SHADED AREA – ORIENT GROUND

PRONG TO RIGHT AS SHOWN

ANTI-TIP

BRACKET

LOCATE WATER LINE

(REAR ENTRY) WITHIN

SHADED AREA

4

1

/ 2 "

(114)

1 / 4 "

(6)

17 1 / 2 " (445)

2 1 /

2

"

(64)

20" (508)

13 1 / 2

(343)

"

3 / 4 "

(19)

3"

(76)

80"

(2032)

Dimensions in parentheses are in millimeters unless otherwise specified.

38

NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO

PREVENT UNIT FROM TIPPING FORWARD

FRONT VIEW

27"

(686)

1 1 / 2

(38)

ANTI-TIP

BRACKET

WATER LINE

SIDE ENTRY

LOCATION

SIDE VIEW

"

I N T E G R A T E D R E F R I G E R A T I O N

O V E R A L L D I M E N S I O N S

Models 700BR, 700BF(I) and 700BC(I)

3

/ 8 "

(10)

27"

(686)

(UNIT DIMENSION)

24"

(610)

(UNIT DIMENSION)

1 / 2 "

(13)

13 1 / 4 "

(337)

DRAWER

MOUNTING DETAIL

10 1 / 4 "

(260)

20 3 / 8 "

(518)

34 1 / 2 "*

(876)

9 3 / 4 "

(248)

4"

(102) SIDE VIEW

*

1 / 2 " (13) +

FRONT VIEW

24"

(610)

DRAWER CLOSED

19 1 / 2 "*

(495)

25 7 / 8 " (657)

TOP VIEW

* DRAWER PANEL THICKNESS NOT INCLUDED

D R A W E R S

Model 700BR

All Refrigerator

Model 700BF

All Freezer

Model 700BFI

All Freezer with Ice Maker

Model 700BC

Refrigerator | Freezer

Model 700BCI

Refrigerator | Freezer with Ice Maker

I N S T A L L A T I O N

S P E C I F I C A T I O N S

Models 700BR, 700BF(I) and 700BC(I)

Models without an ice maker will not require the water line connection.

TOP VIEW TOP VIEW

25"

(635)

1 1 / 2 "

(38)

ANTI-TIP

BRACKET*

13 1 / 2 "

(343)

15 1 /

2

(394)

" 9"

(229)

WATER LINE

BOTTOM ENTRY

LOCATION

*PLACEMENT OF THE

ANTI-TIP BRACKET

SHOULD BE 24" (610)

FROM THE FRONT OF THE

UNIT WITHOUT PANELS

TO THE BACK OF THE

ANTI-TIP BRACKET.

27"

(686)

6"

(152)

27"

(686)

1 1 / 2

(38)

"

ANTI-TIP

BRACKET

13 1 / 2 "

(343)

WATER LINE

SIDE ENTRY

LOCATIONS

25"

(635)

27"

(686)

1 1 / 2 "

(38)

34 1 / 2 "

(876)

NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO

PREVENT UNIT FROM TIPPING FORWARD

FRONT VIEW

ANTI-TIP

BRACKET

SIDE VIEW

WATER LINE

SIDE ENTRY

LOCATION

4 1 / 2 "

(114)

LOCATE ELECTRICAL WITHIN

SHADED AREA – ORIENT GROUND

PRONG TO RIGHT AS SHOWN

ANTI-TIP

BRACKET

LOCATE WATER LINE

(REAR ENTRY) WITHIN

SHADED AREA

3"

(76)

1 /

4

"

(6)

13"

(330)

2

1

/ 2 " (64)

15 1 / 2 " (394)

9"

(229)

3 /

4

"

(19)

M O D E L 7 0 0 B R

M O D E L 7 0 0 B F ( I )

M O D E L 7 0 0 B C ( I )

Overall Dimensions

Width 27" (686)

Height 34 1 /

2

" (876)

Depth 24" (610)

Finished Opening

Width 27" (686)

Height 34 1 /

2

" (876)

Depth 25" (635)*

*The depth of the unit is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of

25" (635).

Refer to installation instructions shipped with each Wolf product for detailed specifications.

39

I N T E G R A T E D R E F R I G E R A T I O N

P A N E L

R E Q U I R E M E N T S

Door and drawer panels must be a minimum of thick.

5 /

8

" (16)

The door panel cannot exceed 40 lbs

(18 kg) and each drawer panel must not exceed 12 lbs

(5 kg) for 27" (686) wide units. For 36"

(914) wide units, the door panel weight limit is 53 lbs (24 kg) and 16 lbs (7 kg) for each drawer panel.

C A B I N E T R Y A P P L I C A T I O N S

Integrated refrigeration is compatible with virtually any style and look of cabinetry. The models can be used with framed as well as frameless cabinets. Because of the precise application and the look you may want to achieve, there are important questions you need to answer before ordering panels for the doors/drawers. As you look at styles of cabinets, keep some important facts in mind:

IMPORTANT NOTE: The depth of each Integrated model is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You must move the unit back into drywall or bring the cabinets forward to achieve a flush fit.

The height of the door panel can grow beyond

45 3 /

8

" (1153) and exceed the 80" (2032) overall height as long as you stay below the recommended door panel weight limit.

The toe kick clearance can vary with the height of the lower drawer panel; the maximum panel height is 16 11 /

16

" (424). You must keep a minimum space of 4" (102) clear below the bottom edge of the lower drawer panel so the unit can be properly vented.

We recommend using D-style handles. For the cabinet door, handles must be located near the edge of the panel opposite the hinge, centered top to bottom. Locate handles in the top center area of the drawer panels.

IMPORTANT NOTE: The inside edges of the rough opening, as well as the sides and a portion of the backside of the decorative panels will need to be finished, as they will be exposed when the doors are open.

F R A M E D C A B I N E T R Y

Framed cabinetry applications present you with different questions to address. The illustrations below show common applications of framed cabinetry. These are not meant to be the only alternatives, but are suggestions from designers around the country. Also refer to the full-scale illustrations at the end of this section for specifics on door openings.

NOTE: In the illustrations below, the first width dimension shown is for 27" (686) wide units and the second dimension is for 36" (914) wide units.

CABINET

FRAME

CABINET

DOOR

SUB-ZERO

UNIT

24

(610)

TO WALL

1/8" (10)

REVEAL

DOOR PANEL

27

(686)

OR

36

(914)

Traditional frame – full overlay

(top view)

CABINET

FRAME

CABINET

DOOR

SUB-ZERO

UNIT

24

(610)

TO WALL

1/8" (10)

REVEAL

DOOR PANEL

27

(686)

OR

36

(914)

Traditional frame – standard overlay

(top view)

SUB-ZERO

UNIT

24

(610)

TO WALL

CABINET

FRAME

CABINET

DOOR

1/8" (10)

REVEAL

DOOR PANEL

27

(686)

OR

36

(914)

Traditional frame – 3 /

8

" (10) offset

(top view)

40

I N T E G R A T E D R E F R I G E R A T I O N

F R A M E D C A B I N E T R Y –

B E A D E D I N S E T A P P L I C A T I O N

The illustration below shows a 27" (686) wide

Integrated base or tall unit installed within a framed cabinetry, beaded inset application.

Review, giving particular attention to the overall panel specifications. Also refer to the full-scale illustrations at the end of this section for specifics on door openings.

CABINET DOOR

SUB-ZERO

UNIT

24"

(610)

TO WALL

TOP VIEW

A A

DOOR PANEL

27"

(686)

26 3 /

4

"

(679)

PANEL WIDTH

1 1 / 2 "

(38)

A) ALL REVEALS ARE 1/8" (3)

B) DRAWER RAILS ARE ATTACHED TO DRAWER FRONTS

C) BOTTOM RAIL MUST BE REMOVABLE

*DIMENSIONS MAY VARY

2 7 " ( 6 8 6 )

W I D E M O D E L S

Installation of a

27" (686) wide

Integrated base or tall unit within framed cabinetry.

*Dimensions may vary.

Dimensions are based on a 1 /

8

" (3) reveal. A reveal of up to 1 /

4

" (6) is possible, but panel dimensions need to be adjusted accordingly.

47 7 /

8

"

(1216)

84"

(2134)

SHADED AREA

INDICATES STATIONARY

STYLES AND RAILS

80"*

(2032)

1 1 /

2

"

(38)

27"

(686)

FRONT VIEW

1 1 /

2

"

(38)

B

A

13 9 /

16

(345)

"

B

A

1 1 / 2 "

(38)

15 1 /

16

"

(383)

C

A

4"*

(102)

34 1 / 2 "

(876) *

4" (102)

24"

(610)

SIDE VIEW

Dimensions are in inches with millimeters in parentheses unless otherwise specified.

41

I N T E G R A T E D R E F R I G E R A T I O N

F R A M E D C A B I N E T R Y –

B E A D E D I N S E T A P P L I C A T I O N

The illustration below shows 36" (914) wide

Integrated tall unit installed within a framed cabinetry, beaded inset application. Review, giving particular attention to the overall panel specifications. Also refer to the full-scale illustrations at the end of this section for specifics on door openings.

3 6 " ( 9 1 4 )

W I D E M O D E L S

Installation of a

36" (914) wide

Integrated tall unit within framed cabinetry.

*Dimensions may vary.

Dimensions are based on a 1 /

8

" (3) reveal. A reveal of up to 1 /

4

" (6) is possible, but panel dimensions need to be adjusted accordingly.

CABINET DOOR

TOP VIEW

A

SUB-ZERO

UNIT

24"

(610)

TO WALL

A

DOOR PANEL

36"

(914)

35

3

/ 4 " (908)

PANEL WIDTH

A) ALL REVEALS ARE 1/8" (3)

B) DRAWER RAILS ARE ATTACHED TO DRAWER FRONTS

C) BOTTOM RAIL MUST BE REMOVABLE

*DIMENSIONS MAY VARY

1 1 /

2

"

(38)

47 7 / 8 "

(1216)

84"

(2624)

Dimensions in parentheses are in millimeters unless otherwise specified.

42

SHADED AREA

INDICATES STATIONARY

STYLES AND RAILS

80"*

(2032)

1 1 / 2 "

(38)

36"

(914)

FRONT VIEW

1 1 / 2 "

(38)

A

B

13 9 / 16 "

(345)

B

A

1 1 / 2 "

(38)

15 1 / 16 "

(383)

C

A

4"*

(102)

34 1 /

2

"

(876) *

4" (102)

24"

(610)

SIDE VIEW

I N T E G R A T E D R E F R I G E R A T I O N

F R A M E L E S S C A B I N E T R Y

The illustrations show hypothetical installations of Integrated base or tall units within frameless cabinetry. Review, giving particular attention to the overall panel specifications. Also refer to the full-scale illustrations at the end of this section for specifics on door openings.

A

45

3

/ 8 "

(1153)

A

45 3 / 8 "

(1153)

26 3 /

4

"*

(679)

PANEL WIDTH

24"

(610)

A

13 9 / 16 "

(345)

A

16 11 /

16

(424)

"*

4"*

(102)

TOE KICK

27"

(686)

FINISHED OPENING

A) ALL REVEALS ARE 1/8" (3)

34 1 / 2 "

(876) *

35 3 /

4

"*

(908)

PANEL WIDTH

80"*

(2032)

79 7 / 8 "*

(2029)

80"*

(2032)

79 7 / 8 "*

(2029)

2 7 " ( 6 8 6 )

W I D E M O D E L S

Installation of a

27" (686) wide

Integrated base or tall unit within frameless cabinetry.

*Dimensions may vary.

Dimensions are based on a 1 /

8

" (3) reveal. A reveal of up to 1 /

4

" (6) is possible, but panel dimensions need to be adjusted accordingly.

SIDE VIEW

*DIMENSIONS MAY VARY

24"

(610)

3 6 " ( 9 1 4 )

W I D E M O D E L S

Installation of a

36" (914) wide

Integrated tall unit within frameless cabinetry.

*Dimensions may vary.

Dimensions are based on a 1 /

8

" (3) reveal. A reveal of up to 1 /

4

" (6) is possible, but panel dimensions need to be adjusted accordingly.

A

13 9 / 16 "

(345)

A

16 11 /

16

"*

(424)

4"*

(102)

TOE KICK

36"

(914)

FINISHED OPENING

A) ALL REVEALS ARE 1/8" (3)

34 1 / 2 "

(876) *

SIDE VIEW

*DIMENSIONS MAY VARY

To install integrated panels, see the detailed procedures outlined in the

Sub-Zero Integrated

Installation

Instructions.

43

I N T E G R A T E D R E F R I G E R A T I O N

P A N E L C O N S I D E R A T I O N S

The illustrations below provide panel width dimensions for installation of a single tall unit,

27" (686) and 36" (914) wide models.

Illustrations on the following page provide panel width dimensions for installing two tall units side by side, 27" (686) wide models and 36"

(914) wide models.

P A N E L

R E Q U I R E M E N T S

Door and drawer panels must be a minimum of thick.

5 /

8

" (16)

The door panel cannot exceed 40 lbs

(18 kg) and each drawer panel must not exceed 12 lbs

(5 kg) for 27" (686) wide units. For 36"

(914) wide units, the door panel weight limit is 53 lbs (24 kg) and 16 lbs (7 kg) for each drawer panel.

2 7 " ( 6 8 6 )

W I D E M O D E L S

Panel width dimensions for installation of a 27" (686) wide tall unit.

Dimensions are based on a 1 /

8

" (3) reveal. A reveal of up to 1 /

4

" (6) is possible, but panel dimensions need to be adjusted accordingly.

* 1

8 (3) min

REVEAL

25

(635)

CABINETRY

OR SIDE

PANEL

IMPORTANT NOTE: The depth of each

Integrated model is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward to achieve a flush fit.

27

(686)

26

3

4 (679)

3

4 (19)

PANEL

24

(610)

TO BACK

OF UNIT

25

7

8 (657)

APPLIANCE

DOOR WIDTH

* 1

8 (3) min

REVEAL

25

(635)

CABINETRY

OR SIDE

PANEL

SUB-ZERO

UNIT

*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL

3 6 " ( 9 1 4 )

W I D E M O D E L S

Panel width dimensions for installation of a 36" (914) wide tall unit.

Dimensions are based on a 1 /

8

" (3) reveal. A reveal of up to 1 /

4

" (6) is possible, but panel dimensions need to be adjusted accordingly.

* 1

8 (3) min

REVEAL

36

(914)

35

3

4 (908)

3

4 (19)

PANEL

* 1

8 (3) min

REVEAL

25

(635)

CABINETRY

OR SIDE

PANEL

24

(610)

TO BACK

OF UNIT

34

7

8 (886)

APPLIANCE

DOOR WIDTH

25

(635)

CABINETRY

OR SIDE

PANEL

SUB-ZERO

UNIT

*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL

Dimensions are in inches with millimeters in parentheses unless otherwise specified.

44

I N T E G R A T E D R E F R I G E R A T I O N

P A N E L C O N S I D E R A T I O N S

As the reveal between cabinets and the

Integrated unit decreases, the potential exists for severe finger pinching or crushing if a hand or fingers are placed in the opening when the door is closing.

When 3 /

4

" (19) or thicker panels are used and a reveal less than 1 /

4

" (6) is maintained, the door panels may cause damage to the

Sub-Zero unit when the door is open at the maximum 105˚ stop. You should use the built-in 90˚ stop to prevent damage.

* 1

8 (3) min

REVEAL

26

13

16 (681)

3

4 (19)

PANEL

25

(635)

CABINETRY

OR SIDE

PANEL

24

(610)

TO BACK

OF UNIT

DOOR

SUB-ZERO

UNIT

54

(1372)

26

13

16 (681)

* 1

8 (3) min

REVEAL

3

4 (19)

PANEL

DOOR

* 1

8 (3) min

REVEAL

25

(635)

CABINETRY

OR SIDE

PANEL

SUB-ZERO

UNIT

*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL

2 7 " ( 6 8 6 )

W I D E M O D E L S

Panel width dimensions for installation of two 27" (686) wide tall units side by side.

Dimensions are based on a 1 /

8

" (3) reveal. A reveal of up to 1 /

4

" (6) is possible, but panel dimensions need to be adjusted accordingly.

* 1

8 (3) min

REVEAL

35

13

16 (910)

3

4 (19)

PANEL

25

(635)

CABINETRY

OR SIDE

PANEL

24

(610)

TO BACK

OF UNIT

DOOR

SUB-ZERO

UNIT

72

(1829)

35

13

16 (910)

* 1

8 (3) min

REVEAL

3

4 (19)

PANEL

DOOR

* 1

8 (3) min

REVEAL

25

(635)

CABINETRY

OR SIDE

PANEL

SUB-ZERO

UNIT

*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL

3 6 " ( 9 1 4 )

W I D E M O D E L S

Panel width dimensions for installation of two 36" (914) wide tall units side by side.

Dimensions are based on a 1 /

8

" (3) reveal. A reveal of up to 1 /

4

" (6) is possible, but panel dimensions need to be adjusted accordingly.

To install integrated panels, see the detailed procedures outlined in the

Sub-Zero Integrated

Installation

Instructions.

45

I N T E G R A T E D R E F R I G E R A T I O N

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

I N S T A L L A T I O N O P T I O N S

The illustrations show some typical installations and their dimension considerations. The depth dimension in the illustrations may vary depending on cabinet styles, treatment of countertops or other design options.

IMPORTANT NOTE: The depth of each

Integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635). Refer to the illustrations.

NOTE: In the Installation Options illustrations, the first width dimension shown is for 27" (686) wide units and the second dimension is for 36"

(914) wide units.

D U A L I N S T A L L A T I O N S

If two or more Integrated models are installed side by side where there is 2" (51) or less of space between the units, a heater kit is recommended—TTDUAL for two tall units installed side by side and BBDUAL for two base units or a base unit and a tall unit installed side by side.

These optional components are available through your Sub-Zero dealer.

25

(635)

25

(635)

CABINETS

27

(686)

OR

36

(914)

TOP VIEW

Installation without side panels

CABINETS

27

(686)

OR

36

(914)

MINIMUM

5

8

(16) SIDE PANELS

Installation with side panels

CABINETS

25

(635)

54

(1372)))

OR

72

(1829))

)

TOP VIEW

Installation of two units side by side

CABINETS

25

(635)

27

(686)

OR

36

(914)

MINIMUM

5

8

(16) SIDE PANELS

Installation at end of run

Dimensions are in inches with millimeters in parentheses unless otherwise specified.

46

I N T E G R A T E D R E F R I G E R A T I O N

D O O R P A N E L H E I G H T

The height of the door panel can grow beyond

45 3 /

8

" (1153) and exceed the 80" (2032) overall height, as long as you stay below the recommended door panel weight limit.

The top illustration shows how the panel may grow and what you need to consider doing to finish the area in back of the door panel.

IMPORTANT NOTE: The valance you use to finish the area behind the door panel must stay behind the front plane of the finished molding.

U P P E R V A L A N C E

Tall Models

The depth of each

Integrated model is

24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit.

This will require a minimum rough opening depth of 25"

(635).

1

8

(3)

T O E K I C K C L E A R A N C E

The toe kick clearance can vary with the height of the lower drawer panel; the maximum panel height is 16 11 /

16

" (424).

IMPORTANT NOTE: You must keep a minimum space of 4" (102) clear below the bottom edge of the lower drawer panel so the unit can be properly vented. In addition, any decorative base molding must be removable for possible servicing and cleaning of the condenser.

The bottom illustration shows the area below the lower drawer where the operating mechanical equipment of the Integrated unit is housed.

1

1

2 (38)

25

(635)

TO WALL

DECORATIVE VALANCE

CANNOT EXTEND BEYOND

THE FRONT OF THIS PLANE

DECORATIVE VALANCE

P A N E L

R E Q U I R E M E N T S

Door and drawer panels must be a minimum of thick.

5 /

8

" (16)

The door panel cannot exceed 40 lbs

(18 kg) and each drawer panel must not exceed 12 lbs

(5 kg) for 27" (686) wide units. For 36"

(914) wide units, the door panel weight limit is 53 lbs (24 kg) and 16 lbs (7 kg) for each drawer panel.

REMOVABLE MOLDING

BY SUB-ZERO

45

3

8

(1153)

80*

(2032)

TO

FLOOR

TO

BOTTOM

OF

DOOR

PANEL

TOP HINGE

* FINISHED HEIGHT OF 80" (2032) IS TO TOP OF SUB-ZERO MOLDING

K I C K P L A T E A R E A

Base and Tall Models

10

9

16

(268)

PANEL

10

(254)

OPTIONAL

16

11

16

(424)

PANEL

1

2

(13)

9

11

16

(246)

4

(102)

BASE MOLDING MUST

BE REMOVABLE

25

(635)

TO WALL

2

5

8

(67)

TO 4

(102) FLOOR

47

I N T E G R A T E D R E F R I G E R A T I O N

D O O R C L O S E D

Full-scale (top view)

F R A M E D C A B I N E T R Y

IMPORTANT NOTE: The depth of each

Integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit.

1 0 5 ˚ M A X I M U M

D O O R O P E N I N G

1/4 scale (top view)

SUB-ZERO

DOOR

24

(610)

TO BACK

OF UNIT

LINE OF INTERFERENCE*

LINE OF INTERFERENCE*

AT MAXIMUM DOOR OPENING

1

8

(3)

MIN.

REVEAL

MOUNTING BRACKET SCREW

PANEL

3

4

(19)

25

34

7

8 (657)

7

8 (886)

DOOR WIDTH FOR 27" (686) MODELS

DOOR WIDTH FOR 36" (914) MODELS

SUB-ZERO DOOR

24

(610)

TO BACK

OF UNIT

LINE OF INTERFERENCE*

SIDE MOLDING AND

INSTALLATION HARDWARE

PROVIDED BY SUB-ZERO

FLUSH

FURNITURE

FINISH

48

*If the panel is thicker than 3 /

4

" (19), it is recommended that you utilize the built-in

90˚ door stop to prevent damage to the panel and face frame.

I N T E G R A T E D R E F R I G E R A T I O N

F R A M E L E S S C A B I N E T R Y

IMPORTANT NOTE: The depth of each

Integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit.

D O O R C L O S E D

Full-scale (top view)

1

8

(3)

MIN.

REVEAL

SUB-ZERO DOOR

3 / 4 " (19) DOOR PANEL

COUNTERTOP SIDE PANEL

24

(610)

TO

WALL

LINE OF INTERFERENCE*

LINE OF INTERFERENCE*

AT MAXIMUM DOOR OPENING

MOUNTING BRACKET SCREW

3

4

(19)

PANEL

25

34

7

8 (657)

7

8 (886)

DOOR WIDTH FOR 27" (686) MODELS

DOOR WIDTH FOR 36" (914) MODELS

SUB-ZERO DOOR

24

(610)

TO BACK

OF UNIT

LINE OF INTERFERENCE*

SIDE MOLDING AND

INSTALLATION HARDWARE

PROVIDED BY SUB-ZERO

1 0 5 ˚ M A X I M U M

D O O R O P E N I N G

1/4 scale (top view)

Adjacent side panel and countertop application.

Dimensions are in inches with millimeters in parentheses unless otherwise specified.

*If the panel is thicker than 3 /

4

" (19), it is recommended that you utilize the built-in

90˚ door stop to prevent damage to the panel and face frame.

49

W I N E S T O R A G E

U N D E R C O U N T E R

15 1 / 8 "

(384)

34 1 / 16 "

(865)

34"

(864)

23 7 / 8

"

(606)

34 3 / 16 "

(868)

24 1 / 4

"

(616)

M O D E L 3 1 5 W

Built-In

M O D E L 4 2 4

Built-In

M O D E L 4 2 4 F S

Free-Standing

A L L W I N E S T O R A G E

27"

(686)

30"

(762)

80"

(2032)

M O D E L 4 2 7

Integrated

M O D E L 4 3 0

Built-In

Model 430 has been redesigned as

Model WS-30. For more information, visit our website, subzero.com.

W I N E S T O R A G E | R E F R I G E R A T O R

27"

(686)

80"

(2032)

M O D E L 4 2 7 R

Integrated

Dimensions in parentheses are in millimeters unless otherwise specified.

84"

(2134)

With the installation of a harness kit,

Wine Storage models, except Model 315W, are Star-K compliant to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org.

For details about the harness kit, contact your Sub-Zero dealer.

The illustrations represent the full line of

Wine Storage models. The Model 424FS free-standing unit comes with a classic stainless steel exterior.

Comprehensive installation instructions are shipped with each model. Refer to those instructions in preparing and installing all

Sub-Zero products. The instructions can also be found on our website, subzero.com.

W I N E S T O R A G E

Sub-Zero‘s innovative addition to its complete line of residential refrigeration is wine storage equipment—the ultimate in beauty, engineering, and attention to detail. From the exterior and the smooth lines of the free-standing Model 424FS classic stainless steel to the ability to use wood on the Built-In and Integrated models, each unit is beautiful.

With the exception of the free-standing Model

424FS, each model is available in three stainless steel finishes and will have the capability of having wood panels applied to the doors. With the Model 427R, you can also apply the wood to the drawers.

The new Model 315W, a single-zone Wine

Storage unit, comes only with a glass door and can be ordered as an overlay or classic stainless steel unit.

The free-standing Model 424FS does not require any panels or surrounding cabinetry; it comes with classic stainless steel exterior.

All models will be shipped with glass doors as standard equipment. The glass doors allow one to see the wine that is being stored. Optional solid doors and high altitude glass doors will be treated as special orders and must be ordered 90 days before you expect delivery. Model 315W cannot be ordered with a solid door.

Stainless steel models will be shipped with tubular stainless steel handles, while the overlay models will come with no handle hardware.

Optional stainless steel panels and handles for

Models 427 and 427R are offered in the classic, platinum and carbon stainless steel finishes and are ordered and shipped as sales accessories.

The stainless steel Models 424 and 430 must be ordered in one of three stainless steel finishes of classic, platinum and carbon.

Optional handles are available for all models except the framed and stainless steel Model

430. The framed Model 430 will come with an extruded handle identical in design to our Built-In models.

Standard grille assemblies for the Model 430 will be provided in 1" (25) increments from 10" (254) to 15" (381). The standard height will be 11"

(279). The framed model will have a louvered grille, the stainless steel model will feature a heavy-duty grille, and the overlay model will have the panel grille, which accepts decorative panel inserts.

For information regarding specific Wine Storage models, refer to the illustrations in this section.

50

W I N E S T O R A G E

F E A T U R E S A N D O P T I O N S

When looking for wine storage, you no longer have to think only about an undercounter application. Sub-Zero offers you complete flexibility from the perspective of design applications and storage capabilities.

Model 315W, a single-zone Wine Storage unit, comes as an overlay or classic stainless steel unit and is offered only with a glass door.

Model 424 comes in the overlay and stainless steel door panel configurations. Model 424FS

(free-standing) is identical to the Model 424 but with classic stainless steel exterior and is designed to be attractive in a stand-alone setting. Models 424 and 424FS are available in either a glass or solid door model.

Models 427 and 427R are offered as integrated or stainless steel and are available in either a glass or solid door model. Optional stainless steel panels and handles are offered in classic, platinum and carbon stainless steel finishes at the 80" (2032) height, and only classic stainless steel at the 84" (2134) height. Stainless steel panels are available as sales accessories.

Model 430 comes in the framed, overlay and stainless steel options and is available in either a glass or solid door model. Stainless steel Model

430 must be ordered in one of the stainless steel finishes of classic, platinum and carbon.

Built-In Look. Sub-Zero offers you a host of design alternatives to choose from when selecting the look you want. Wood or stainless steel, framed, overlay or integrated.

Dual Zone System*. With the exception of the single-zone Model 315W, all Wine Storage models allow you to have precise temperature control within one degree of your pre-set temperature in each of the two wine compartments.

Dual Refrigeration System*. In a similar fashion to our Built-In, each Wine Storage model has dual refrigeration so your client will have specific, individual temperature control of the two wine compartments.

Electronic Controls*. Microprocessor offers touch pad controls that are easy to understand and that set the temperatures accurately.

Display Shelf*. This beautiful shelf offers your clients the opportunity to display those prize bottles or magnums of wine in their collection. It is illuminated with discreet lighting mounted in the control panel. (Not available with Models

315W, 424 and 424FS.)

Storage Shelves. The sturdy, rustproof wire shelves can easily accommodate standard 750 ml bottles, half bottles, as well as magnums. All the shelves are finished off with a natural cherry wood facing. In addition, all shelves will enable you to be sure the wine is stored properly and that the corks are in contact with the bottles‘ contents.

Roller Assembly. All shelves have a roller assembly, which enables you to have a threequarter extension for easy access to all bottles of stored wine.

Service Alert*. An indicator light will let you know if service may be necessary.

Home Alarm*. Wiring connections give you the option of hooking the Wine Storage unit up to your home security system.

Discreet Lighting. Our soft low-wattage lighting is independent of door opening.

Correct Temperature*. The range of each temperature zone is 38˚F (3˚C) to 65˚F (18˚C), and your set temperature is digitally displayed in the control panel.

Humidity. Proper humidity is maintained throughout the entire unit.

UV Protection. The tinted glass minimizes the amount of ultraviolet light entering the unit.

Lock*. A lock will be offered as an option for all

Wine Storage models. The lock is offered as a sales accessory and should be ordered through your Sub-Zero dealer. Special planning is necessary when ordering locks for Models 427 and

427R, refer to page 61 for details.

Solid Door*. If you would like to order a model without glass, you have that option. This will be treated as a special order and must be ordered

90 days before you expect delivery.

High Altitude Glass. For installations above

5,000' (1524 m) in elevation, we offer the high altitude glass as a special order. The high altitude glass door is standard on Model 315W.

Tight Seal. Magnetic gaskets around the doors give extra-tight seals.

Kickplate. The solid, adjustable kickplate gives a true built-in look and conforms to American

Institute of Architects standards.

Front Venting. All Sub-Zero Wine Storage models are designed for mechanical system airflow at the front of the appliance. Decorative panels must not cover louvered surfaces or prevent removal of louvered components.

S U B - Z E R O

W A R R A N T Y

Sub-Zero products are covered by a two, five and twelve year residential warranty (exclusions apply). See warranty details at the end of this guide.

*Not available with Model 315W.

51

W I N E S T O R A G E

M O D E L 3 1 5 W

U N D E R C O U N T E R

B U I L T - I N

M O D E L O P T I O N S

Overlay Design

Classic Stainless Steel

315W/O

315W/S

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Wine Storage Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Shipping Wt (O)

Shipping Wt (S)

15 1 /

8

" (384)

34 1 /

16

" (865)

24" (610)

26 bottles*

34 1 /

16

" (865)

16 5 /

8

" (422)

LH or RH

114 lbs (52 kg)

118 lbs (54 kg)

F E A T U R E S

1 Temperature Zone

4 (750 ml) Bottles per Standard Shelf

6 Standard Shelves (24 bottles*)

1 Fixed Bottle Holder (2 bottles*)

Full-View High Altitude Glass Door

M O D E L 4 2 4

U N D E R C O U N T E R

B U I L T - I N

M O D E L O P T I O N S

Overlay Design

Classic Stainless Steel

424/O

424/S

Platinum Stainless Steel 424/P

Carbon Stainless Steel 424/B

Full-View Glass Door (standard)

High Altitude Glass Door**

Solid Door

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Wine Storage Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Shipping Wt (glass)

Shipping Wt

(glass /S/P/B)

Shipping Wt (solid)

23 7 /

8

" (606)

34" (864)

24" (610)

46 bottles*

34 1 /

4

" (870)

25 3 /

8

" (645)

LH or RH

190 lbs (86 kg)

195 lbs (88 kg)

185 lbs (84 kg)

F E A T U R E S

2 Temperature Zones

8 (750 ml) Bottles per Standard Shelf

2 Top Zone Shelves (16 bottles*)

3 Bottom Zone Shelves (24 bottles*)

1 Fixed Bottle Holder (6 bottles*)

Full-View Glass Door

M O D E L 4 2 4 F S

U N D E R C O U N T E R

F R E E - S T A N D I N G

M O D E L O P T I O N S

Full-View Glass Door (standard)

High Altitude Glass Door**

Solid Door

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Wine Storage Capacity

Door Swing Clearance

Specify Door Swing

Shipping Wt

24 1 /

4

" (616)

34 3 /

16

" (868)

24 5 /

8

" (625)

46 bottles*

25 3 /

8

" (645)

LH or RH

220 lbs (100 kg)

F E A T U R E S

2 Temperature Zones

8 (750 ml) Bottles per Standard Shelf

2 Top Zone Shelves (16 bottles*)

3 Bottom Zone Shelves (24 bottles*)

1 Fixed Bottle Holder (6 bottles*)

Full-View Glass Door

Classic Stainless Steel Exterior and Door Frame

M O D E L 3 1 5 W M O D E L 4 2 4 M O D E L 4 2 4 F S

*750 ml bottles.

**High altitude glass doors are for installations at or above 5,000' (1524 m) in elevation and will be treated as a special order. Please allow 90 days for delivery.

When ordering, add an (HA) before the (G) to obtain the correct model number.

***Optional stainless steel panels and handles are ordered and shipped as sales accessories. For additional information on panel and handle sizes and applications, check our website, subzero.com.

52

A C C E S S O R I E S

Contact your Sub-Zero Dealer

Classic stainless steel front panels—platinum and carbon available in certain sizes

(Models 427 and 427R)*

Tubular handles in classic, platinum and carbon stainless steel

Front, side and grille panels

(framed Model 430)*

Louvered, panel or stainless steel grilles in varied heights

(Model 430)*

UL-approved door lock kit

Dual installation heater kit

(Models 427 and 427R)*

*Accessory is available only for models listed.

W I N E S T O R A G E

M O D E L 4 2 7

A L L W I N E S T O R A G E

M O D E L 4 3 0

A L L W I N E S T O R A G E

M O D E L 4 2 7 R

W I N E S T O R A G E | R E F R I G E R A T O R

M O D E L O P T I O N S

Full-View Glass Door (standard)

High Altitude Glass Door**

Solid Door

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Wine Storage Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Shipping Wt (glass)

Shipping Wt (solid)

27" (686)

80" (2032)

24" (610)

132 bottles*

79 1 /

2

" (2019)

25 1 /

2

" (648)

LH or RH

395 lbs (179 kg)

386 lbs (175 kg)

F E A T U R E S

2 Temperature Zones

9 (750 ml) Bottles per Standard Shelf

5 Top Zone Shelves (45 bottles*)

9 Bottom Zone Shelves (81 bottles*)

1 Display Shelf (6 bottles*)

Full-View Glass Door

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handle)***

M O D E L O P T I O N S

Framed Design

Overlay Design

430/F

430/O

Classic Stainless Steel 430/S

Platinum Stainless Steel 430/P

Carbon Stainless Steel 430/B

Full-View Glass Door (standard)

High Altitude Glass Door**

Solid Door

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Wine Storage Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Shipping Wt (glass)

Shipping Wt

(glass /S/P/B)

Shipping Wt (solid)

30" (762)

84" (2134)

24" (610)

147 bottles*

83" (2108)

30 1 /

8

" (765)

LH or RH

435 lbs (197 kg)

445 lbs (202 kg)

412 lbs (187 kg)

F E A T U R E S

2 Temperature Zones

10 (750 ml) Bottles per Standard Shelf

5 Top Zone Shelves (50 bottles*)

9 Bottom Zone Shelves (90 bottles*)

1 Display Shelf (7 bottles*)

Full-View Glass Door

M O D E L O P T I O N S

Full-View Glass Door (standard)

High Altitude Glass Door**

Solid Door

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Wine Storage Capacity

Refrigerator Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Drawer Clearance

Shipping Wt (glass)

Shipping Wt (solid)

27" (686)

80" (2032)

24" (610)

78 bottles*

5.3 cu ft (150 L)

79 1 /

2

" (2019)

25 1 /

2

" (648)

LH or RH

19 1 /

2

" (495)

410 lbs (186 kg)

406 lbs (184 kg)

F E A T U R E S

3 Temperature Zones

2 Refrigerated Drawers

9 (750 ml) Bottles per Standard Shelf

6 Top Zone Shelves (54 bottles*)

2 Bottom Zone Shelves (18 bottles*)

1 Display Shelf (6 bottles*)

Full-View Glass Door

P A N E L O P T I O N S

Integrated

Classic, platinum or carbon stainless steel finish (includes handles)***

M O D E L 4 2 7 M O D E L 4 3 0

Model 430 has been redesigned as

Model WS-30. For more information, visit our website, subzero.com.

M O D E L 4 2 7 R

NOTE: For Wine Storage standard glass door models, add (G) to the model number and for solid door models, add (S) to the model number (example 424G or 424S). The exception is Model 315W which is available as a glass door model only.

53

W I N E S T O R A G E

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

P L A N N I N G I N F O R M A T I O N

Review the Overall Dimensions and Installation

Specifications illustrations for your Wine Storage model on the following pages. These specifications cover all the details you need to know about space allocation and placement of electrical, whether the models are framed, overlay, stainless steel or integrated.

All Wine Storage models must be installed so that the door can open a minimum of 90˚ or you will have problems pulling the wine shelves out.

Refer to the door clearance and door swing information.

For corner installations, you need allow for a minimum 3" (76) filler so the door can open to

90˚. If you are using larger handle hardware, you will also need to take that into account.

For a maximum 90˚ door opening, use the door stop built into the hinge system of Model 427.

An optional 90˚ door stop kit for Model 430 is available from your Sub-Zero dealer.

If you will be connecting the unit to a home security system, you must allow a minimum of

36" (914) of the system‘s wiring to be routed in the electrical area designated for your model.

IMPORTANT NOTE: The anti-tip bracket must be installed to prevent the unit from tipping forward.

E L E C T R I C A L R E Q U I R E M E N T S

A 115 V AC, 60 Hz, 15 amp circuit breaker and electrical supply are required. A separate circuit servicing only this appliance is required.

All Sub-Zero Wine Storage models are equipped with a power supply cord with a 3-prong grounding plug, which must be plugged into a mating

3-prong grounding-type wall receptacle. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. Refer to the Installation Specifications illustrations on the following pages for electrical placement for your model.

IMPORTANT NOTE: A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

D U A L I N S T A L L A T I O N S

If you are installing a Wine Storage unit next to an existing Sub-Zero unit, you may have to allow for a filler strip.

If you are installing a Model 427 or 427R Wine

Storage unit next to an existing Integrated

Sub-Zero unit, with 2" (51) or less between the units, an optional heater kit (BBDUAL or

TTDUAL) will need to be installed to prevent moisture from forming between the units. This optional kit is available through your Sub-Zero dealer.

Dimensions in parentheses are in millimeters unless otherwise specified.

54

W I N E S T O R A G E

O V E R A L L D I M E N S I O N S

Undercounter Wine Storage

15

1

/ 8 "

(384)

23

7

8

(606)

23

1

2

(597) DOOR FRAME

34 1 / 16

(865)

" 30 1 / 16 "

(764)

10

3

4

(273)

CENTERED

VERTICALLY

*34

(864)

3

30

16

(767)

DOOR

FRAME

23 1

8

(587)

(CABINET DIMENSION)

4"

(102)

FRONT VIEW

FRONT VIEW

*

1

/ 2 " (13) +

M O D E L 3 1 5 W

Built-In

Width 15 1 /

8

" (384)

Height 34 1 /

16

" (865)

Depth 24" (610)

Note the location of pre-drilled holes for optional handle hardware.

M O D E L 4 2 4

Built-In

Width 23 7 /

8

" (606)

Height 34" (864)

Depth 24" (610)

4

(102)

SIDE VIEW

24

1

4

(616)

24

5

8

(625)

(CABINET DIMENSION)

*34

3

16

(868)

FRONT VIEW

*

1 / 2 " (13) +

M O D E L 4 2 4 F S

Free-Standing

Width 24 1 /

4

" (616)

Height 34 3 /

16

" (868)

Depth 24 5 /

8

" (625)

4

(102)

TOE KICK

SIDE VIEW

U N D E R C O U N T E R

Model 315W

Built-In

Model 424

Built-In

Model 424FS

Free-Standing

I N S T A L L A T I O N S P E C I F I C A T I O N S

Undercounter Models

Model 315W

A) Rough Opening Width 15 1 /

4

" (387)

B) Rough Opening Height 34 1 /

2

" (876)

C)

D)

Min Door Clearance

Min Clearance at 90˚

16 5 /

8

" (422)

17 1 /

4

" (438)

Model 424

A) Rough Opening Width 24" (610)

B) Rough Opening Height 34 1 /

2

" (876)

C) Min Door Clearance 25 3 /

8

" (644)

D) Min Clearance at 90˚ 26" (660)

Model 424FS*

C) Min Door Clearance

D) Min Clearance at 90˚

25 3 /

8

" (644)

26" (660)

*Free-standing Model 424FS requires no surrounding cabinetry.

Dimensions are for finished rough openings.

Door swing clearances are based on stainless steel door and handle dimensions.

24"

(610)

ROUGH

OPENING

DEPTH

2 1 /

2

"

(64)

TOP VIEW

A

ROUGH OPENING

WIDTH

MODEL 315W

LOCATE ELECTRICAL

ANYWHERE ON

BACK WALL

MODELS 424 | 424FS

LOCATE ELECTRICAL

WITHIN SHADED AREA

4 1 /

2

"

(114)

15 1 / 2 "

(394)

E

FRONT VIEW

B

ROUGH

OPENING

HEIGHT TO

FINISHED

FLOORING

90˚

C

D

Refer to installation instructions shipped with each Wolf product for detailed specifications.

55

W I N E S T O R A G E

I N T E G R A T E D

Model 427

All Wine Storage

Model 427R

Wine Storage |

Refrigerator

O V E R A L L

D I M E N S I O N S

Model 427 | 427R

Width 27" (686)

Height 80" (2032)

Depth 24" (610)

10 3

4

(273)

CENTERED

VERTICALLY

O V E R A L L D I M E N S I O N S

All Wine Storage – Model 427

27

(686)

26 1

8

(664) DOOR FRAME

14

(356)

13

16

(20)

80

(2032)

*78 5

8

(1997)

70

7

16

(1789)

DOOR

FRAME

WITH

HINGES

Note the location of pre-drilled holes for optional handle hardware.

24

(610)

(UNIT DIMENSION)

FRONT VIEW

*

1 / 2 " (13) +

8

15

16

(227)

4

(102)

SIDE VIEW

3

8

(9)

Wine Storage | Refrigerator – Model 427R

27

(686)

26

1

8

(664) DOOR FRAME

14

(356)

24

(610)

(UNIT DIMENSION)

13

16

(20)

10

4

3

(273)

CENTERED

VERTICALLY

*78

5

8

(1997)

44

7

8

(1139)

DOOR

FRAME

WITH

HINGES

80

(2032)

1

2

(13)

13

1

4

(337)

10

4

1

(260)

20

3

8

(517)

25

9

16

(650)

DRAWER FRONT

FRONT VIEW

*

1 / 2 " (13) +

*34 1

2

(877)

9

3

4

(248)

4

(102)

SIDE VIEW

Dimensions in parentheses are in millimeters unless otherwise specified.

I N S T A L L A T I O N S P E C I F I C A T I O N S

Models 427 | 427R

Dimensions are for finished rough openings.

Door swing clearances are based on stainless steel door and handle dimensions.

IMPORTANT NOTE: The depth of Models

427 and 427R is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of

25" (635).

25"

(635)

ROUGH

OPENING

DEPTH

TOP VIEW

90˚

28" (711)

DOOR CLEARANCE

25 1 / 2 "

(648)

105˚

MAXIMUM

DOOR SWING

35" (889)

DOOR CLEARANCE

23 7 / 8 "

(606)

80" (2032)

ROUGH OPENING

HEIGHT

TO FINISHED

FLOORING

79 1 / 2 " (2019)

MIN HEIGHT

REQUIRED

27"

(686)

ROUGH OPENING WIDTH

25 1 / 2 "

(648)

2 1 / 2 "

(64)

LOCATE ELECTRICAL

WITHIN SHADED AREA

4 1 / 2 "

(114)

15 1 / 2 "

(394)

E

FRONT VIEW

ANTI-TIP BRACKET

56

W I N E S T O R A G E

O V E R A L L D I M E N S I O N S

All Wine Storage – Model 430

28

5

16

(719)

30

(762)

DOOR FRAME

84

(2134)

10 3

4

(273)

67

7

8

(1724)

DOOR

FRAME

23

7

8

(606)

4

1

8

TOE

FRONT VIEW (105) KICK SIDE VIEW

*

1

2 INCH (13) ADJUSTMENT IN LEVELING LEGS

I N S T A L L A T I O N S P E C I F I C A T I O N S

All Wine Storage – Model 430

Dimensions are for finished rough openings.

Door swing clearances are based on stainless steel door and handle dimensions.

90˚

33"

(838)

DOOR CLEARANCE

30 1 / 8 "

(765)

23 7 /

8

"

(606)

BEHIND

FRAME

24"

(610)

ROUGH

OPENING

DEPTH

TOP VIEW

ANTI-TIP BLOCK

7"

(178)

E

LOCATE ELECTRICAL

WITHIN SHADED AREA

6"

(152)

130˚

MAXIMUM

DOOR SWING

50"

(1270)

DOOR CLEARANCE

30 1 / 8 "

(765)

83 3 / 4 " (2127)

ROUGH OPENING

HEIGHT

TO FINISHED

FLOORING WITH

STANDARD

11" (279) GRILLE

83" (2108)

MIN HEIGHT

REQUIRED

(LEVELERS IN)

29 1 / 2 "

(749)

ROUGH OPENING WIDTH

75 1 /

2

"

(1918)

A L L W I N E

S T O R A G E

Model 430

Built-In

O V E R A L L

D I M E N S I O N S

Model 430

Width 30" (762)

Height 84" (2134)

Depth 24" (610)

Note the location of pre-drilled holes for optional handle hardware.

FRONT VIEW

Refer to installation instructions shipped with each Wolf product for detailed specifications.

57

W I N E S T O R A G E

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

D O O R P A N E L S

Unless you are installing a stainless steel model, you will need to provide a complete door panel in the instance of a solid door model, or a frame for the glass door application where wine will be seen from the outside. If you order a stainless steel unit, Models 315W, 424, 424FS and 430 will be shipped with their panels and hardware installed and you will merely install the Sub-Zero.

However, for Models 427 and 427R, you will have to have the stainless steel panels and handles installed.

Wine Storage solid door models are available as a special order. You must allow 90 days from the time of order until you can expect delivery.

M O D E L 4 2 4 F S – F R E E - S T A N D I N G

The free-standing Model 424FS does not require any panels or surrounding cabinetry. It has a beautiful classic stainless steel exterior, door frame and handle. Refer to the Overall Dimensions illustration for the Model 424FS.

C A B I N E T R Y D I M E N S I O N S

Model 315W

15"

(381)

22 3 / 8 " (568)

Dimensions in parentheses are in millimeters unless otherwise specified.

58

34 1 /

16

"

(865)

OVERALL

HEIGHT

30 1 /

16

"

(764)

15 1 / 8 " (384)

OVERALL

WIDTH

FRONT VIEW

4"

(102)

TOE

KICK

19" (483)

SIDE VIEW

O V E R L A Y P A N E L S P E C I F I C A T I O N S

Model 315W

Door Panel Width

Door Panel Height

15" (381)

30 1 /

16

" (764)

Min Width of Rails and Stiles 2 1 /

4

" (57)

Door Frame Panel Weight Limit 10 lbs (5 kg)

Min Panel Thickness 5 /

8

" (16)

W I N E S T O R A G E

O V E R L A Y P A N E L S –

M O D E L S 3 1 5 W | 4 2 4

The overlay panel applied to Models 315W and

424 should not be confused with the Built-In overlay panel application. The overlay panel will consist of only a frame and would be either the

5 /

8

" (16) or 3 /

4

" (19) thick panel you may be using. It is affixed directly to the door itself with screws through a series of pre-drilled holes in the perimeter of the door itself. You do not need any backer or spacer panel.

Refer to the Overall Dimensions and Cabinetry

Dimensions illustrations for Models 315W and

424 to give you a better idea of the exact space our unit needs and how the panel fits in relationship with the unit.

The glass door opening of the standard Model

315W and 424 are designed to be exposed to room air circulation. Decorative overlays on the glass should be kept to a minimum. Also, rails and stiles can be increased in size but should not exceed cabinet manufacturers‘ standard width. They cannot exceed overall door panel dimensions specified, as they would interfere with the operation of the door. The back sides of rails and stiles that will be visible through the glass door will need to be finished. Also, the inside edges of the frames must be finished to match the front surface.

The Overall Dimensions illustrations show the location of predrilled holes for optional handle hardware. Refer to page 64 for specifics about installing handles on this overlay application.

IMPORTANT NOTE: Wine Storage models with a solid door are available as a special order and require 90 days for delivery. When ordering panels for a solid door unit, follow the overall panel dimensions listed; rail and stile dimensions do not apply. Model 315W is not available with a solid door.

IMPORTANT NOTE: When planning to install the

Model 315W or 424 next to adjoining cabinetry, you must make provisions to allow the door to open to a maximum of 145˚ and not interfere with the door panel. Refer to the full-scale illustration at the end of this section.

I N S T A L L A T I O N

To install overlay panels, see the detailed procedures outlined in the

Sub-Zero Wine

Storage Installation

Instructions.

A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel.

C A B I N E T R Y D I M E N S I O N S

Model 424

23

3

4

(603)

23

7

8

(606)

DOOR PANEL

**23 7

8

(606)

(CABINET DIMENSION)

*34

1

2

(877)

1

30

16

(764)

DOOR

PANEL

CENTERED

VERTICALLY

O V E R L A Y P A N E L S P E C I F I C A T I O N S

Model 424

Door Panel Width

Door Panel Height

23 3 /

4

" (603)

30 1 /

16

" (764)

Min Width of Rails and Stiles 2 1 /

4

" (57)

Door Frame Panel Weight Limit 10 lbs (5 kg)

Solid Door Panel Weight Limit 20 lbs (9 kg)

Min Panel Thickness 5 /

8

" (16)

FRONT VIEW

4

(102)

TOE

KICK SIDE VIEW

*

1

2 INCH (13) ADJUSTMENT IN LEVELING LEGS

** MODEL 424/S (STAINLESS STEEL WRAPPED DOOR) FINISHES OFF AT 23 INCHES DEEP

59

W I N E S T O R A G E

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

I N T E G R A T E D P A N E L S –

M O D E L S 4 2 7 | 4 2 7 R

The integrated full panels or frame panels for glass doors for these models will follow some of the identical planning processes used with the

Integrated line. The installation of the door panels is completely different, however. Rather than using the mounting hardware we used with the Integrated line, door panels for both Models

427 and 427R will be applied with screws applied through our door.

The drawer panels for the Model 427R will be applied using the Integrated technique of mounting brackets.

Refer to the Overall Dimensions and Cabinetry

Dimensions illustrations for Models 427 and

427R to give you a better idea of the exact space our unit needs and how the panel fits in relationship with the unit.

IMPORTANT NOTE: The depth of Models 427 and 427R is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into the drywall or bring the cabinets forward. Refer to the Integrated Refrigeration section.

IMPORTANT NOTE: The glass door opening of the standard Models 427 and 427R is designed to be exposed to room air circulation. Decorative overlays on the glass should be kept to a minimum. While the cabinet front stiles are a minimum of 2 1 /

4

" (57) for both Models 427 and

427R, the top and bottom rails are different.

Rails and stiles can be increased in size but should not exceed cabinet manufacturers‘ standard width. They cannot exceed overall door panel dimensions specified, as they would interfere with the operation of the door. The back sides of rails and stiles that will be visible through the glass door will need to be finished.

Also, the inside edges of the frames must be finished to match the front surface.

IMPORTANT NOTE: The inside edges of the rough opening will need to be finished as they will be exposed when the doors are open.

C A B I N E T R Y D I M E N S I O N S

Model 427

27

(686)

FINISHED OPENING

26 3

4

(679) DOOR PANEL

24

(610)

(UNIT DIMENSION)

75

7

8

(1927)

DOOR

PANEL

80

(2032)

FINISHED

OPENING

79

7

8

(2029)

TRIMMED

DOOR

I N T E G R A T E D P A N E L S P E C I F I C A T I O N S

Model 427

Door Panel Width

Door Panel Height

Min Width of Top Rail

Min Width of Bottom Rail

Min Width of Stiles

26 3 /

4

" (679)

75 7 /

8

" (1927)

3 3 /

4

" (95)

8" (203)

2 1 /

4

" (57)

Door Frame Panel Weight Limit 20 lbs (9 kg)

Solid Door Panel Weight Limit 40 lbs (18 kg)

Min Panel Thickness 5 /

8

" (16)

Dimensions in parentheses are in millimeters unless otherwise specified.

4

(102)

TOE KICK

4

(102)

FRONT VIEW TOE KICK SIDE VIEW

*

1

2

INCH (13) ADJUSTMENT IN LEVELING LEGS

60

W I N E S T O R A G E

I N T E G R A T E D P A N E L S –

M O D E L S 4 2 7 | 4 2 7 R

IMPORTANT NOTE: The dimensions of these panels and stiles are assuming the models finish off at 80" (2032) in height overall and have a 4"

(102) toe kick for the Model 427. If you finish off at 84" (2134), for instance, you must add 4"

(102) additional to the overall height of the panel and remember to add 4" (102) to the top rail.

Likewise, if you allow for a 6" (152) toe kick for the Model 427, you must subtract 2" (51) from the bottom rail.

Door panels for Models 427 and 427R can grow beyond the 80" (2032) height to accommodate any size door as long as you stay below door panel weight limit of 20 lbs (9 kg) for glass door units and 40 lbs (18 kg) for solid door units.

Refer to the specifications under Door Panel

Height on page 47 of the Integrated section.

IMPORTANT NOTE: The toe kick area on the

Model 427 cannot be larger than 6" (152), and no larger than 9" (229) for the 427R. The toe kick area for either model cannot be less than

4" (102).

In the Overall Dimensions illustrations, note the location of pre-drilled holes for optional handle hardware. Refer to page 64 for specifics about installing handle hardware on this overlay application.

IMPORTANT NOTE: If you are installing

Sub-Zero‘s optional lock kit on a Model 427 or

427R, you may have to order door panels that exceed the 80" (2032) finished height. Consult the lock kit installation instructions and see if your panels will allow for an adequate installation. To obtain these instructions, check our website, subzero.com.

IMPORTANT NOTE: In the panel specifications for Model 427R, the bottom drawer panel height is based on a 4" (102) toe kick. If you want to show a 6" (152) toe kick, you must subtract 2"

(51) from the bottom drawer panel height.

IMPORTANT NOTE: Wine Storage models with a solid door are available as a special order and require 90 days for delivery. When ordering panels for a solid door unit, follow the overall panel dimensions indicated in the chart; rail and stile dimensions do not apply.

I N S T A L L A T I O N

To install integrated panels, see the detailed procedures outlined in the

Sub-Zero Wine

Storage Installation

Instructions.

A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel.

C A B I N E T R Y D I M E N S I O N S

Model 427R

27

(686)

FINISHED OPENING

26 3

4

(679) DOOR PANEL

24

(610)

(UNIT DIMENSION)

45 3

8

(1153)

80

(2032)

FINISHED

OPENING

1

8

(3)

79

7

8

(2029)

TRIMMED

DOOR

1

8

(3)

13

9

16

(345)

26 3

4

(679)

DRAWER PANEL

*34

1

2

(877)

16

11

16

(424)

4

(102)

TOE KICK

4

(102)

FRONT VIEW TOE KICK SIDE VIEW

*

1

2

INCH (13) ADJUSTMENT IN LEVELING LEGS

I N T E G R A T E D P A N E L S P E C I F I C A T I O N S

Model 427R

Door Panel Width

Door Panel Height

Min Width of Top Rail

Min Width of Bottom Rail

Min Width of Stiles

26 3 /

4

" (679)

45 3 /

8

" (1153)

3 3 /

4

" (95)

3" (76)

2 1 /

4

" (57)

Door Frame Panel Weight Limit 20 lbs (9 kg)

Solid Door Panel Weight Limit 40 lbs (18 kg)

Top Drawer Panel Width 26 3 /

4

" (679)

Top Drawer Panel Height

Bottom Drawer Panel Width

Bottom Drawer Panel Height

13 9 /

16

" (345)

26 3 /

4

" (679)

16 11 /

16

" (424)

Drawer Panel Weight Limit

Min Panel Thickness

12 lbs (5 kg) each

5 /

8

" (16)

61

W I N E S T O R A G E

M O D E L 4 3 0 – F R A M E D P A N E L S

You cannot use a 1 /

4

" (6) panel to cover the glass door of a framed Model 430. It is fine when applying a panel to the solid door, but in either instance, you should consider using raised panels with a minimum 5/8" (16) thickness.

When using a raised framed panel, you must allow for the edge to be routed 1 /

4

" (6) around the panel to ensure a proper fit. Refer to illustration 1.

With the framed Model 430, you will receive an extruded handle identical in appearance to the

Built-In models. However, it will be an extended handle and will enable you to use raised panels without providing finger clearance to open the door.

IMPORTANT NOTE: Wine Storage models with a solid door are available as a special order and require 90 days for delivery. When ordering panels for a solid door unit, follow the overall panel dimensions indicated; rail and stile dimensions do not apply.

A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel.

M O D E L 4 3 0 – O V E R L A Y P A N E L S

Your overlay model will be shipped without handle hardware and with an 11" (279) overlay panel grille as standard equipment. You will need to order a panel for the grille and hardware to complement your surrounding cabinetry.

While the overlay panel design offers you a more seamless appearance, you need to be aware of adjacent cabinets and/or countertops when the door is opened. Refer to the full-scale illustrations at the end of the Built-In section.

To achieve the overlay look, you need three different panels—the decorative overlay panel, a

0.10" (3) spacer panel and a 1 /

4

" (6) backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or more likely, three different panels.

Refer to the Overlay Panel Specifications for complete details on the overlay sizing. In addition, illustrations 2 and 3 will give you a better idea of the panel construction and how it interacts with our frame.

The glass door opening of the standard Model

430 is designed to be exposed to room air circulation. Decorative overlays on the glass should be kept to a minimum. Also, rails and stiles can be increased in size but should not exceed cabinet manufacturers‘ standard width. They cannot exceed overall door panel dimensions specified, as they would interfere with the operation of the door.

The back sides of rails and stiles that will be visible through the glass door will need to be finished. Also, the inside edges of the frames must be finished to match the front surface.

Trim Reveal

1

/ 4 " (6) min

Rout to 1 / 4 " (6) thickness

Illus. 1

2 1 /

4

"

(57)

Rail / Stile

5 /

8

"

(16)

Door

Frame

Glass

2 1 / 4 " (57) Rail / Stile

.10"

(3) Spacer Panel

.10"

(3)

Overlay Panel

1 / 4 " (6) Backer Panel

5 /

16

"

(8) min

Door Frame Glass

5 / 32 " (4)

1

/ 16 " (2)

Door / Grille

Trim

Illus. 2

Overlay Panel

Spacer Panel

5

/ 8 " min

(16)

.10" (3)

1 / 4 " (6)

Backer

Panel

Illus. 3

62

W I N E S T O R A G E

M O D E L 4 3 0 – O V E R L A Y P A N E L S

As with the Sub-Zero Built-In models, you have the flexibility of ordering grilles in a variety of heights for either the framed or overlay application. Optional panel grille dimensions for the framed Model 430 are the same as listed for

Built-In Models 611 and 611G on page 21.

Overlay grille panel dimensions for the overlay

Model 430, standard 11" (279) grille, are listed below. Refer to page 25 for optional grille height dimensions. The width of the overlay grille, spacer and backer panel will be the same regardless of the height.

In addition, side panel information for a Model

430 is available on page 26 of the Built-In section. Refer to illustration 12 on page 26 for placement of toe kick and grille area cut-outs.

IMPORTANT NOTE: Wine Storage models with a solid door are available as a special order and require 90 days for delivery. When ordering panels for a solid door unit, follow the overall panel dimensions indicated; rail and stile dimensions do not apply.

A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel.

I N S T A L L A T I O N

To install framed or overlay panels, see the detailed procedures outlined in the

Sub-Zero Wine

Storage Installation

Instructions.

C A B I N E T R Y D I M E N S I O N S

Model 430

28

30

7

16

(722)

(762)

DOOR FRAME

84

(2134)

68

(1727)

DOOR

PANEL

CENTERED

VERTICALLY

4

1

16

TOE

FRONT VIEW (103) KICK SIDE VIEW

*

1

2 INCH (13) ADJUSTMENT IN LEVELING LEGS

F R A M E D P A N E L S P E C I F I C A T I O N S

Model 430 – Framed (F)

Framed Door Panel Width

Framed Door Panel Height

28 1 /

8

" (714)

67 11 /

16

" (1719)

Min Width of Rails and Stiles 2 1 /

4

" (57)

Door Frame Panel Weight Limit 25 lbs (11 kg)

Solid Door Panel Weight Limit 50 lbs (23 kg)

Min Panel Thickness 5 /

8

" (16)

O V E R L A Y P A N E L S P E C I F I C A T I O N S

Model 430 – Overlay (O)

Overlay Door Panel Width

Overlay Door Panel Height

Spacer Panel Width

Spacer Panel Height

Backer Panel Width

Backer Panel Height

Min Width of Rails and Stiles

28 7 /

16

" (722)

68" (1727)

27 1 /

2

" (699)

67 1 /

16

" (1073)

28 1 /

8

" (714)

67 11 /

16

" (1719)

2 1 /

4

" (57)

Door Frame Panel Weight Limit 25 lbs (11 kg)

Solid Door Panel Weight Limit 50 lbs (23 kg)

Min Panel Thickness 5 /

8

" (16)

G R I L L E P A N E L S P E C I F I C A T I O N S

Model 430 – Overlay (O)

Overlay Grille Panel Width

Overlay Grille Panel Height*

Spacer Panel Width

Spacer Panel Height*

Backer Panel Width

Backer Panel Height*

Grille Panel Weight Limit

Min Panel Thickness

28 7 /

16

" (722)

10 1 /

4

" (260)

27 1 /

2

" (699)

9 5 /

16

" (236)

28 1 /

8

" (714)

9 15 /

16

" (252)

15 lbs (7 kg)

5 /

8

" (16)

*Grille panel dimensions are for standard 11" (279) grille. Refer to page 25 for optional grille heights.

Dimensions in parentheses are in millimeters unless otherwise specified.

63

W I N E S T O R A G E

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

H A R D W A R E C O N S I D E R A T I O N S

With Models 315W and 424 (overlay), Models

427 and 427R (integrated) and the Model 430

(overlay), you must supply your own handle hardware. It is recommended you use our optional handles and use the pre-drilled holes supplied to locate the handles within the frame of our unit. The metal frame on the door has numerous mounting holes on each side to accommodate Sub-Zero accessory handles.

This will allow you to provide the best possible handle alignment and not take away from the strength of the stile in this area after the unit is used a number of times. We recommend using a pull handle and not a pull knob.

If you elect to place different hardware on these units, we encourage you to fasten the hardware by passing through our door and attaching the hardware through the Sub-Zero door‘s frame.

Optional stainless steel handles are available in a variety of diameters and lengths, as are handles to match the color and style of Wolf ovens.

Contact your Sub-Zero dealer for specifics.

W I N E S H E L F W O O D F A C I N G

Sub-Zero has provided a natural cherry wood facing to its wine storage shelves in each model.

You can also replace these strips with wood more complementary to your design and surrounding cabinetry.

The Wine Shelf Wood Facing illustration on the following page can be used as a full-scale template. You must follow the layout of this format to accommodate the shelves properly. To remove the cherry strips, take the shelves out and remove the screws. Reverse the procedure to affix the new wood.

If you choose to stain or seal the wood facing, be aware that some of these substances are hazardous and will damage stored wine.

When planning for hardware, refer to the

Door Frame Profile full-scale illustration on the following page to give you a better understanding of the unit‘s frame and positioning of the glass for the door. You must not drill through this glass.

Dimensions in parentheses are in millimeters unless otherwise specified.

64

W I N E S T O R A G E

D O O R F R A M E P R O F I L E

Glass

Cabinet Door

Profile

A

2 1 / 4 " (57) Rail / Stile

A

This full-scale illustration is typical of the

Model 424 door frame profile; details of the other

Wine Storage door frames will vary slightly.

D O O R F R A M E H A N D L E O F F S E T

Wine Storage Models

Dimension A

Model 315W

Model 424

Model 427

Model 427R

Model 430

1" (25)

1" (25)

7 /

8

" (22)

7 /

8

" (22)

15 /

16

" (24)

IMPORTANT NOTE: Rails and stiles must be a minimum of 2 1 /

4

" (57) wide (except for the rails of Models 427 and 427R, which must be wide enough to cover the door hinges).

The back sides of rails and stiles that will be visible through the glass door will need to be finished.

F U L L - S C A L E

T E M P L A T E S

The full-scale illustrations on the following pages enable you to understand some of the unique situations you may face as you plan for the installation of the Wine

Storage units. Use these illustrations as templates.

W I N E S H E L F W O O D F A C I N G

7 / 64 "

(3)

1 1 / 2 " (38)

27 / 32 "

(21)

5 / 64 "

(2)

5 / 8 "

(16)

Maximum Thickness

A

(WIDTH)

FRONT VIEW

This full-scale illustration provides the dimensions you will need should you choose to replace the natural cherry wood facing of each wine shelf with wood more complementary to your design and surrounding cabinetry.

IMPORTANT NOTE: Dimensions will vary for

Model 315W. Additional information can be found in the Specifications pdf file for Model 315W on our website, subzero.com.

23 / 64 "

(9)

9 / 16 " (14)

SIDE VIEW

W I N E S H E L F W O O D F A C I N G

Wine Storage Models

Dimension A

Model 315W*

Model 424

Model 424FS

Model 427

Model 427R

Model 430

10

19

19

20

20

24

15

1

1

15

9

/

16

" (278)

/

2

" (495)

/

2

" (495)

15 /

16

" (532)

/

16

" (532)

/

16

" (624)

*Dimensions will vary for Model 315W.

65

W I N E S T O R A G E

M O D E L 4 2 4 – D O O R C L O S E D A N D 1 4 5 ˚ M A X O P E N I N G

24 (610)

CABINETRY

OPENING

1

23 (587)

TO BACK OF

APPLIANCE

66

SUB-ZERO DOOR

3

4

(19)

DOOR PANEL

3

23 (600)

DOOR PANEL

WIDTH

The full-scale illustration shows what considerations you need to make for the installation of Model 424 and how the maximum door opening may interact with adjacent cabinets and countertops.

145 ˚ *

1

2

(13)

*

MODEL 424 MUST

EXTEND A MINIMUM

1/4"

(6)

BEYOND THE

FRONT SURFACE OF

ADJOINING

CABINETRY TO

ALLOW THE MAXIMUM

DOOR SWING

1

4 (6)

*

1

8

(3)

SUB-ZERO

DOOR

DOOR

PANEL

U N D E R C O U N T E R R E F R I G E R A T I O N

N E W U N D E R C O U N T E R R E F R I G E R A T I O N

Available in 2007

Aside from the full-size models that Sub-Zero offers in its Built-In and Integrated lines of refrigeration and its Wine Storage equipment, we round out our product line-up with a new line of

Undercounter refrigeration available in 2007.

Our new Undercounter line consists of an all refrigerator model, an all refrigerator beverage center, a refrigerator / freezer combination model and an all refrigerator model designed for outdoor applications. Included in the line is the

Undercounter Model 315I(P) ice maker.

The Undercounter models accept a decorative door panel for an overlay or stainless steel application and can be built in to fit flush with virtually any base cabinet style. The outdoor

Model UC-24RO is available in classic stainless steel only and comes with door panel and handle in place. Model UC-24RO must also be built-in into cabinetry and is not designed to be a free-standing unit.

A classic stainless steel door panel with handle is available as a sales accessory for Models

UC-24R, UC-24C and 315I(P). Contact your

Sub-Zero dealer for information on accessory panels and handles. Model UC-24B must be ordered as overlay (UC24-B/O) or stainless steel

(UC-24B/S).

Sub-Zero Undercounter models are all backed by one of the best warranties in the industry.

Undercounter models, except Model 315I(P), are Star-K compliant to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org.

NEW

A L L R E F R I G E R A T O R

23 7 /

8

"

(606)

34"

(864)

M O D E L U C - 2 4 R

All Refrigerator

NEW

B E V E R A G E C E N T E R

23

7

/

8

"

(606)

34"

(864)

M O D E L U C - 2 4 B

Beverage Center

NEW

C O M B I N A T I O N

23

7

/

8

"

(606)

34"

(864)

M O D E L U C - 2 4 C

Combination

Refrigerator / Freezer

NEW

O U T D O O R M O D E L

23

7

/

8

"

(606)

34"

(864)

M O D E L U C - 2 4 R O

All Refrigerator

Comprehensive installation instructions are shipped with each model. Refer to those instructions in preparing and installing all

Sub-Zero products. The instructions can also be found on our website, subzero.com.

I C E M A K E R

15 3 / 16 "

(386)

33 5 / 8

"

(854)

M O D E L 3 1 5 I ( P )

Ice Maker

S U B - Z E R O

W A R R A N T Y

Sub-Zero products are covered by a two, five and twelve year residential warranty (one and five year warranty for Model UC-24RO).

See warranty details at the end of this guide.

Dimensions in parentheses are in millimeters unless otherwise specified.

67

U N D E R C O U N T E R R E F R I G E R A T I O N

M O D E L U C - 2 4 R

A L L R E F R I G E R A T O R

NEW

Energy Star Qualified

M O D E L U C - 2 4 B

B E V E R A G E C E N T E R

NEW M O D E L U C - 2 4 C NEW

C O M B I N A T I O N

R E F R I G E R A T O R | F R E E Z E R

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Annual Energy Usage

Shipping Weight

23 7 /

8

" (606)

34" (864)

24" (610)

5.7 cu ft (161 L)

34 1 /

4

" (870)

25 3 /

8

" (645)

LH or RH

339 kWh | $31*

130 lbs (59 kg)

M O D E L O P T I O N S

Overlay Design

Classic Stainless Steel

UC-24B/O

UC-24B/S

Full-View Glass Door (standard)

High Altitude Glass Door**

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Wine Storage Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Annual Energy Usage

Shipping Weight (O)

Shipping Weight (S)

23 7 /

8

" (606)

34" (864)

24" (610)

5.7 cu ft (161 L)

16 bottles***

34 1 /

4

" (870)

25 3 /

8

" (645)

LH or RH

424 kWh | $39*

130 lbs (59 kg)

135 lbs (61 kg)

Available Fall 2007

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Wine Storage Capacity

Freezer Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Annual Energy Usage

Shipping Weight

23 7 /

8

" (606)

34" (864)

24" (610)

3.6 cu ft (102 L)

8 bottles***

1.1 cu ft (31 L)

34 1 /

4

" (870)

25 3 /

8

" (645)

LH or RH

434 kWh | $40*

130 lbs (59 kg)

F E A T U R E S

2 Adjustable Glass Shelves

1 Utility Bin

2 Door Shelves

F E A T U R E S

2 Wine Storage Shelves

1 Adjustable Glass Shelf

1 Utility Bin

F E A T U R E S

1 Wine Storage Shelf

1 Adjustable Glass Shelf

1 Door Shelf

Automatic Defrost

Automatic Ice Maker

M O D E L U C - 2 4 R M O D E L U C - 2 4 B

Dimensions in parentheses are in millimeters unless otherwise specified.

68

M O D E L U C - 2 4 C

*Annual energy costs are based on

9.06 cents per kilowatt hour.

**High altitude glass doors are for installations at or above 5,000'

(1524 m) in elevation and will be treated as a special order. Please allow

90 days for delivery. When ordering, put an (A) after the (B) to obtain the correct model number.

**750 ml bottles

Optional stainless steel panels and handles are ordered and shipped as sales accessories for Models UC-24R,

UC-24C and 315I(P).

U N D E R C O U N T E R R E F R I G E R A T I O N

M O D E L U C - 2 4 R O

A L L R E F R I G E R A T O R

O U T D O O R M O D E L

NEW

Energy Star Qualified

Available Summer 2007

M O D E L 3 1 5 I

I C E M A K E R

M O D E L O P T I O N S

Drain Pump Model 315IP

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Min Height Required

Door Swing Clearance

Specify Door Swing

Annual Energy Usage

Shipping Weight

23 7 /

8

" (606)

34" (864)

24" (610)

5.7 cu ft (161 L)

34 1 /

4

" (870)

25 3 /

8

" (645)

LH or RH

339 kWh | $31*

130 lbs (59 kg)

S P E C I F I C A T I O N S

Overall Width

Overall Height

Overall Depth

Ice Storage Capacity

Min Height Required

Door Swing Clearance

Shipping Weight

15 3 /

16

" (386)

33 5 /

8

" (854)

24" (610)

26 lbs (12 kg)

33 3 /

4

" (857)

15 1 /

4

" (387)

100 lbs (45 kg)

F E A T U R E S

2 Adjustable Glass Shelves

1 Utility Bin

2 Door Shelves

Door Lock

Classic Stainless Steel Finish

F E A T U R E S

Automatic Ice Maker

Automatic Defrost

Reversible Door Swing

Drain Pump (Model 315IP)

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

M O D E L U C - 2 4 R O M O D E L 3 1 5 I ( P )

A C C E S S O R I E S

Contact your Sub-Zero Dealer

Classic stainless steel door front panel with tubular handle

Classic stainless steel tubular handle for overlay application

UL approved door lock

69

U N D E R C O U N T E R R E F R I G E R A T I O N

S U B - Z E R O

W A R R A N T Y

Sub-Zero products are covered by a two, five and twelve year residential warranty (one and five year warranty for Model UC-24RO).

See warranty details at the end of this guide.

U N D E R C O U N T E R F E A T U R E S

Overlay Application. The overlay application blends seamlessly into your overall room design and complements surrounding cabinetry. You add the decorative door front panel and hardware.

Sub-Zero accessories handles are available.

The overlay application is available for all Undercounter models except Model UC-24RO. Model

UC-24B must be ordered specifically as overlay

(UC24-B/O).

Stainless Steel Application. A classic stainless steel door front panel and handle is available as an accessory for Models UC-24R, UC-24C and

315I(P). Model UC-24B must be ordered specifically as stainless steel (UC-24B/S). Model

UC-24RO is available as a classic stainless steel model only and comes with door panel and handle in place.

Glass Door—Model UC-24B. The full-view glass door and accent lighting of Model UC-24B matches the appearance of Wine Storage Model

424.

Electronic Controls. The electronic controls with digital readout LCD display are up front and easy to access—not applicable on Model 315I(P).

Glass Shelves. Cantilevered glass shelves are adjustable, easy to clean and spill proof. The glass floor is also spill proof.

Utility Bin. Refrigerator and combination units feature a clear utility bin for storage of smaller items.

Wine Storage. Models UC-24B and UC-24C feature wine storage of 16 and 8 (750 ml) bottles, respectively. The roller-glide wine storage shelves faced with natural cherry wood have a three-quarter extension for easy access.

Automatic Ice Maker. Combination Model

UC-24C features an automatic ice maker with clear ice bucket. The ice maker provides highquality, crescent-shaped ice that won’t stick to the side of the glass.

Two-Litre Bottle Storage. Models UC-24B,

UC-24R and UC-24RO feature two-litre bottle storage in the bottom door shelf.

Door Lock. A UL approved lock is standard on

Model UC-24RO and available as a sales accessory for all other models except Model 315I(P).

Sabbath Feature. The Sabbath feature will allow the lights to remain off during certain religious observances—not applicable on Model 315I(P).

Ice Maker. Model 315I(P) provides high-quality, clear ice with a storage capacity of up to 26 lbs

(12 kg). The ice is not crescent shaped, but instead resembles a small barrel.

Drain. Ice maker Model 315I has a gravity drain, while Model 315IP has a built-in pump to allow water to drain into adjacent sink.

Dimensions in parentheses are in millimeters unless otherwise specified.

70

U N D E R C O U N T E R R E F R I G E R A T I O N

P L A N N I N G I N F O R M A T I O N

Refer to the Installation Specifications for information regarding area requirements, minimum door clearance, placement of electrical and plumbing for Sub-Zero Undercounter models.

The Model 315I can be ordered with or without a pump. If you order the unit without a pump, you must install a drain. Refer to the illustrations on page 73. The drain must be located in a 2"

(51) area centered in the opening for the unit,

23" (651) back from the front door.

P L U M B I N G R E Q U I R E M E N T S

For Models UC-24C and 315I(P), rough in the water supply line. Connect a 1 /

4

" OD copper line to the house supply with an easily accessible shut-off valve between the supply and the unit.

A minimum of 26" (660) of copper tubing is required for the water line for Model UC-24C.

Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. An in-line filter is required when water conditions have a high sediment content.

The ice maker operates on constant water pressure between 20 psi (1.4 bar) and 100 psi

(6.9 bar).

IMPORTANT NOTE: In some cases, a reverse osmosis water filter system may not be able to maintain the minimum pressure consistently.

E L E C T R I C A L R E Q U I R E M E N T S

A 115 V AC, 60 Hz, 15 amp circuit breaker and electrical supply are required. A separate circuit, servicing only this appliance is required.

All Undercounter models are equipped with a power supply cord with a 3-prong grounding plug, which must be plugged into a mating

3-prong grounding-type wall receptacle. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. Refer to the Installation Specifications illustrations.

IMPORTANT NOTE: The Model UC-24RO is designed and safe for use in outdoor applications. When installed outdoors, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock. A GFCI is not recommended for use with other Undercounter models and may cause interruption of operation.

M O D E L O P T I O N S

Model UC-24R

All Refrigerator

Model UC-24B

All Refrigerator

Beverage Center

Model UC-24C

Refrigerator | Freezer with Ice Maker

Model UC-24RO

All Refrigerator

Outdoor Model

Model 315IP

Ice Maker with

Drain Pump

71

U N D E R C O U N T E R R E F R I G E R A T I O N

I N S T A L L A T I O N S P E C I F I C A T I O N S

Models UC-24R, UC-24B, UC-24C and UC-24RO

Overall Dimensions

Overall Width

Overall Height

Overall Depth

23 7 /

8

" (606)

34" (864)

24" (610)

Finished Opening Dimensions

Opening Width

Opening Height

Opening Depth

Door Swing Clearance

24" (610)

34 1 /

2

" (876)

24" (610)

25 3 /

8

" (645)

Models without an ice maker will not require the water line connection.

Door swing clearance based on stainless steel door panel and handle dimensions.

2"

(51)

15 1 /

2

"

(394)

1 / 2 " (13)

LOCATE WATER LINE

(MODEL UC24C ONLY)

WITHIN SHADED AREA

TOP VIEW

24" (610)

ROUGH OPENING

WIDTH

ANTI-TIP BRACKET

2" (51)

LOCATE ELECTRICAL

AND WATER LINE

(MODEL UC24C ONLY)

WITHIN SHADED AREA

15 1 / 2 "

(394)

3" (76)

FRONT VIEW

90˚

25 3 / 8 "

(644)

26"

(660)

DOOR CLEARANCE

15 3 /

16

(386)

"

115˚

DOOR SWING

19"

(483)

I N S T A L L A T I O N S P E C I F I C A T I O N S

Model 315I(P)

Overall Dimensions

Overall Width

Overall Height

Overall Depth

15

33

3

5

/

16

" (386)

/

8

" (854)

24" (610)

Finished Opening Dimensions

Opening Width 15 1 /

4

" (387)

Opening Height

Opening Depth

Door Swing Clearance

34 1 /

2

" (876)

24" (610)

15 1 /

4

" (387)

Refer to the illustrations on the following page for additional specifications.

Door swing clearance based on stainless steel door panel and handle dimensions.

Dimensions in parentheses are in millimeters unless otherwise specified.

72

8"

(203)

1 / 2 "

(13)

LOCATION OF

WATER LINE

TOP VIEW

15 1 / 4 " min (387)

ROUGH

OPENING WIDTH

LOCATE

ELECTRICAL

ANYWHERE ON

BACK WALL

FRONT VIEW

24"

(610)

ROUGH

OPENING

DEPTH

34

1

/ 2 "

(876)

ROUGH

OPENING

HEIGHT

34 1 / 4 "

(870)

MINIMUM

HEIGHT

REQUIRED

24"

(610)

ROUGH

OPENING

DEPTH

34 1 /

2

"

(876)

ROUGH

OPENING

HEIGHT

33 3 / 4 "

(857)

MINIMUM

HEIGHT

REQUIRED

U N D E R C O U N T E R R E F R I G E R A T I O N

M O D E L 3 1 5 I ( P ) – G R A V I T Y D R A I N

O R D R A I N P U M P

The Undercounter ice maker can be ordered with a pump (Model 315IP) or without a pump (Model

315I). The model without a drain pump drains its water by gravity. However, the gravity drain model may be converted to a pump model through the installation of a drain pump kit and drain pump.

Specific step-by-step instructions are included with the drain pump kit. Contact your Sub-Zero dealer for specifics.

I N S T A L L A T I O N S P E C I F I C A T I O N S

Model 315I – Gravity Drain

1 /

8

"

(3)

24"

(610)

WATER

INLET

TUBE

DRAIN

TUBE

LOCATE DRAIN

WITHIN 2" DIA.

AREA 23" BACK

FROM FRONT

OF UNIT

WATER

FILTER

SHUT-OFF

VALVE

The drain and inlet water tubes must be plumbed before connecting to the ice maker. For the gravity drain, all horizontal runs of drain lines must have a 1 /

4

" (6) per 12" (305) fall. An air gap will likely be required between the ice maker drain tube and the drain/waste receptacle. A stand pipe with a trap below it would be acceptable for the drain/waste receptacle. Refer to the illustrations below.

IMPORTANT NOTE: Poor drainage will cause a high rate of ice melting in the bin.

A C C E S S O R I E S

Optional accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the

Showroom Locator section of our website, subzero.com.

Model 315IP – Drain Pump

SHUT-OFF

VALVE

WATER

FILTER

1 /

8

"

(3)

WATER

INLET TUBE

DRAIN

TUBE

24"

(609)

AIR GAP

DEVICE

15 1 /

4

"

(387) MIN.

TOP VIEW

15 1 /

4

"

(387) MIN.

TOP VIEW

WATER

INLET TUBE

DRAIN

TUBE

34 1 /

2

"

(876) NOMINAL

33 3 /

4

"

(857) MIN.

15 1 /

4

"

(387) MIN.

FRONT VIEW

WATER

FILTER

SHUT-OFF

VALVE

SHUT-OFF

VALVE

AIR GAP

DEVICE

34 1 /

2

"

(876) NOMINAL

DRAIN

TUBE

WATER

INLET TUBE

33 3 /

4

"

(857) MIN.

WATER

FILTER

15 1 /

4

"

(387) MIN.

FRONT VIEW

Refer to installation instructions shipped with each Wolf product for detailed specifications.

73

U N D E R C O U N T E R R E F R I G E R A T I O N

I N S T A L L A T I O N

To install framed or overlay panels, see the detailed procedures outlined in the

Sub-Zero Undercounter Installation

Instructions.

Refer to the fullscale illustrations at the end of this section for specifics on door openings and other specifications.

O V E R L A Y P A N E L – M O D E L S U C - 2 4 R

A N D U C - 2 4 C

The overlay door panel design allows for a decorative panel to cover the door trim for a seamless appearance that will compliment surrounding cabinetry. You may also choose to match the handle hardware of surrounding cabinetry.

Refer to the Overlay Panel Specifications below for the panel dimensions of your specific model.

Outdoor Model UC-24RO is available as a classic stainless steel model only and comes with door panel and handle in place.

Rails and stiles must be a minimum of 2 1 /

4

" (57) wide. They can be increased in size but should not exceed cabinet manufacturers standard width. Rails and stiles cannot exceed the overall door panel dimensions specified, as they would interfere with the operation of the door. The back sides of rails and stiles that will be visible through the glass door will need to be finished.

Also, the inside edges of the frames must be finished to match the front surface.

O V E R L A Y P A N E L – M O D E L U C - 2 4 B

The overlay door panel applied to the Model

UC-24B will consist of only a frame and will affix directly to the door with screws through a series of predrilled holes in the perimeter of the door.

The glass door opening of the Model UC-24B is designed to be exposed to room air circulation.

Decorative overlays on the glass should be kept to a minimum. Refer to the Overlay Panel

Specifications below for panel dimensions.

A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel.

O V E R L A Y P A N E L – M O D E L 3 1 5 I ( P )

It is important to understand the differences in mounting any wood panel to the Model 315I(P).

Refer to the Overlay Panel Specifications below for panel dimensions. Also refer to the installation instructions packaged with the unit to understand how the panel is installed.

Dimensions in parentheses are in millimeters unless otherwise specified.

O V E R L A Y P A N E L S P E C I F I C A T I O N S

Undercounter Models

Models UC-24R and UC-24C

Door Panel Width 23 3 /

4

" (603)

Door Panel Height

Panel Thickness

30 1 /

16

" (764)

5 /

8

" (16) min

Panel Weight Limit 20 lbs (9 kg) max

Model UC-24B

Door Panel Width

Door Panel Height

Width of Rails and Stiles

Panel Thickness

Panel Weight Limit

23 3 /

4

" (603)

30 1 /

16

" (764)

2 1 /

4

" (57) min

5 /

8

" (16) min

10 lbs (5 kg) max

Model 315I(P)

Door Panel Width

Door Panel Height

Panel Thickness

Panel Weight Limit

15" (381)

30

5

3 /

8

" (772)

/

8

" (16) min

15 lbs (7 kg) max

74

H H H

W

Models UC-24R and UC-24C

W

Model UC-24B

W

Model 315I(P)

U N D E R C O U N T E R R E F R I G E R A T I O N

D O O R F R A M E P R O F I L E – M O D E L U C - 2 4 B

1" (25) 1" (25)

2 1 / 4 " (57) Rail / Stile

DOOR FRAME PROFILE

Glass

Door Panel Profile

The full-scale illustration shows the door frame profile for Model UC-24B.

IMPORTANT NOTE: Rails and stiles must be a minimum of 2 1 /

4

" (57) wide. The back sides of rails and stiles that will be visible through the glass door will need to be finished.

F U L L - S C A L E

T E M P L A T E S

The full-scale illustrations on the following pages enable you to understand some of the unique situations you may face as you plan for the installation of the Undercounter units. Use these illustrations as templates.

W I N E S H E L F W O O D F A C I N G – M O D E L S U C - 2 4 B A N D U C - 2 4 C

5 / 8 "

(16)

Maximum Thickness

7 / 64 "

(3)

1 1 / 2 " (38)

27 / 32 "

(21)

5 / 64 "

(2)

19 1 / 2 " (495)

FRONT VIEW

For Models UC-24B and UC-24C, use the full-scale illustration above as a template if you choose to replace the natural cherry wood facing with wood more complementary to your design and surrounding cabinetry.

23 / 64 "

(9)

9 / 16 " (14)

SIDE VIEW

75

U N D E R C O U N T E R R E F R I G E R A T I O N

U N D E R C O U N T E R D O O R C L O S E D A N D 1 4 5 ˚ M A X O P E N I N G

24 (610)

CABINETRY

OPENING

1

23 (587)

TO BACK OF

APPLIANCE

The full-scale illustration shows what considerations you need to make for the installation of the Undercounter unit and how the maximum door opening may interact with adjacent cabinets and countertops.

SUB-ZERO DOOR

3

4

(19)

DOOR PANEL

3

23 (600)

DOOR PANEL

WIDTH

145

˚

*

1

2

(13)

*

UNDERCOUNTER

UNIT MUST EXTEND

A MINIMUM 1/4"

(6)

BEYOND THE FRONT

SURFACE OF

ADJOINING

CABINETRY TO

ALLOW THE MAXIMUM

DOOR SWING

1

4 (6)

*

1

8

(3)

SUB-ZERO

DOOR

DOOR

PANEL

76

Dimensions are in inches with millimeters in parentheses unless otherwise specified.

S U B Z E R O P R O D U C T S

L I M I T E D W A R R A N T Y

RESIDENTIAL USE ONLY

FULL FIVE YEAR SEALED SYSTEM WARRANTY

LIMITED SIXTH THROUGH TWELFTH YEAR WARRANTY ON THE SEALED SYSTEM

FULL TWO YEAR WARRANTY ON TOTAL PRODUCT*

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. The sealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any part of the product, that proves to be defective in materials or workmanship.

LIMITED SIXTH THROUGH TWELFTH YEAR SEALED SYSTEM WARRANTY

From the 6th through the 12th year from the date of original installation, your Sub-Zero warranty covers all parts that prove to be defective in materials or workmanship in the sealed system (parts only). The sealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

TERMS APPLICABLE TO EACH WARRANTY

All service provided by Sub-Zero under the above warranty must be performed by an authorized

Sub-Zero service center, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normal business hours. This warranty applies only to products installed for normal residential use. Details regarding a non-residential warranty are available upon request.

The warranty applies only to products installed in any one of the fifty states of the United States, the

District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair, including but not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the condensing unit.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT

SUB-ZERO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY

ARISING BY OPERATION OF LAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSE-

QUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES

OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service and the name of the Sub-Zero authorized service center nearest you, contact your Sub-Zero dealer, distributor or the Sub-Zero Customer Service Department,

P. O. Box 44130, Madison Wisconsin, 53744-4130; check the Constant Care section of our website, subzero.com, or call 800-222-7820.

* Stainless Steel (classic, platinum and carbon) doors, panels, product frames and stainless interior surfaces are covered by a limited 60 day parts and labor warranty for cosmetic defects.

* Replacement water filter cartridges are not covered by the product warranty.

77

78

S U B Z E R O O U T D O O R P R O D U C T S

L I M I T E D W A R R A N T Y

RESIDENTIAL USE ONLY

FULL FIVE YEAR SEALED SYSTEM WARRANTY

FULL ONE YEAR WARRANTY ON TOTAL PRODUCT*

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. The sealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

FULL ONE YEAR WARRANTY*

For one year from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship.

TERMS APPLICABLE TO EACH WARRANTY

All service provided by Sub-Zero under the above warranty must be performed by an authorized

Sub-Zero service center, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normal business hours. This warranty applies only to products installed for normal residential use. Details regarding a non-residential warranty are available upon request.

The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair, including but not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the condensing unit.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT

SUB-ZERO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY

ARISING BY OPERATION OF LAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSE-

QUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES

OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.

To receive parts and/or service and the name of the Sub-Zero authorized service center nearest you, contact your Sub-Zero dealer, distributor or the Sub-Zero Customer Service Department,

P. O. Box 44130, Madison Wisconsin, 53744-4130; check the Constant Care section of our website, subzero.com, or call 800-222-7820.

*Stainless Steel (classic finish) doors, panels, product frames and stainless interior surfaces are covered by a limited 60 day parts and labor warranty for cosmetic defects.

The information and images in this guide are the copyright property of Sub-Zero, Inc. Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub-Zero, Inc.

©Sub-Zero, Inc. all rights reserved.

SUB-ZERO, INC.

P. O. BOX 44130

MADISON, WI 53744 -4130

800.222.7820

SUBZERO.COM

3758546 REV-E 3/2009