Acer | A200 | Specifications | Acer A200 Specifications

ICONIA TAB A200
SERVICE GUIDE
Table of Contents
Chapter 1. Hardware Specifications and Configurations
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tablet tour. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2
1-5
1-5
1-6
1-7
1-8
1-9
1-10
11
Chapter 2. Diagnostic Utilities
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostic Tool SOP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tool Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Uninstallation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2
2-2
2-2
2-2
2-4
2-9
Chapter 3. Service and Maintenance
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance Flowchart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SD Card Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SD Card Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lower Case Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lower Case Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC-In Cable Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC-In Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch Panel Control Cable Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch Panel Control Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LVDS Cable Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LVDS Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Microphone Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Microphone Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WLAN Antenna Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WLAN Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPS Antenna Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPS Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mainboard Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mainboard Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Camera Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Camera Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
i
3-2
3-2
3-3
3-4
3-5
3-7
3-8
3-14
3-19
3-21
3-23
3-25
3-27
3-29
3-32
3-34
3-36
3-38
3-40
3-41
3-42
3-44
3-46
3-48
3-50
3-53
3-55
3-56
Chapter 4. Troubleshooting
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power On Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No Display Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LCD Picture Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch Screen Failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Internal Speaker Failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Internal Microphone Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Camera Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless Function Test Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPS Function Test Failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other Functions Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2
4-3
4-4
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
4-13
Chapter 5. Jumper and Connector Locations
Mainboard Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Mainboard Bottom View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Chapter 6. FRU (Field Replaceable Unit) List
Exploded Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
FRU List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Screw List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Chapter 7. Model Definition and Configuration
ICONIA TAB A200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Chapter 8. Test Compatible Components
Android OS Environment Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
ICONIA TAB A200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Chapter 9. Online Support Information
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
ii
Revision History
Please refer to the table below for the updates made on this service guide.
Date
Chapter
Updates
Copyright
Copyright © 2011 by Acer Incorporated. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission of Acer Incorporated.
Disclaimer
The information in this guide is subject to change without notice.
Acer Incorporated makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties of merchantability or fitness
for any particular purpose. Any Acer Incorporated software described in this manual is sold or
licensed "as is". Should the programs prove defective following their purchase, the buyer (and not
Acer Incorporated, its distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect in the software.
Acer is a registered trademark of Acer Corporation.
Intel is a registered trademark of Intel Corporation.
Other brand and product names are trademarks and/or registered trademarks of their respective
holders.
iii
Conventions
The following conventions are used in this manual:
WARNING:
Indicates a potential for personal injury.
CAUTION:
Indicates a potential loss of data or damage to equipment.
IMPORTANT:
Indicates information that is important to know for the proper completion of a
procedure, choice of an option, or completing a task.
NOTE:
Gives bits and pieces of additional information related to the current topic.
The following typographical conventions are used in this document:
•
Book titles, directory names, file names, path names, and program/process names are shown
in italics.
Example:
the DRS5 User's Guide
/usr/local/bin/fd
the /TPH15spool_M program
•
Computer output (text that represents information displayed on a computer screen, such as
menus, prompts, responses to input, and error messages) are shown in constant width.
Example:
[01] The server has been stopped
•
User input (text that represents information entered by a computer user, such as command
names, option letters, and words) are shown in constant width bold. Variables contained within
user input are shown in angle brackets (< >).
Example:
At the prompt, type run <file name> -m
•
Keyboard keys are shown in bold italics.
Example:
After entering data, press Enter.
•
Screen output (text that represents information displayed on the system, such as menus,
prompts, responses to input, and error messages) are shown in bold.
Example:
On the main menu, select OK.
iv
General Information
This Service Guide provides you with all technical information relating to the basic configuration for
Acer's global product offering. To better fit local market requirements and enhance product
competitiveness, your regional office may have decided to extend the functionality of a machine
(e.g. add-on card, modem, or extra memory capabilities). These localized features are not covered
in this generic service guide. In such cases, contact your regional offices or the responsible
personnel/channel to provide you with further technical details.
When ordering FRU parts:
Check the most up-to-date information available on your regional web or channel. If, for whatever
reason, a part number change is made, it may not be noted in this printed service guide.
For Acer-authorized service providers:
Your Acer office may have a different part number code than those given in the FRU list of this
printed service guide. The list provided by your regional Acer office must be used to order FRU
parts for repair and service of customer machines.
v
CHAPTER 1
Hardware Specifications and Configurations
Hardware Specifications and Configurations . . . . . . . . . . . . . . . . . 1-2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Tablet tour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Left View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Right View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Specifications Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
Hardware Specifications and Configurations
Features
The following is a summary of the computer’s many features:
Form Factor
•
10.1” Tablet
Operating System
•
Android Honeycomb
Platform
•
Tegra 250 Dual Cortex A9, 1GHz
•
Ultra Low Power GeForce® GPU
System Memory
•
RAM: LPDDR2 1G
•
eMMC: 8G/16G
Display
LCM
•
10.1” WXGA LCM (1280 X 800 AUO)
Wide view angle
LVDS interface
Graphics
•
Ultra Low Power GeForce®
Audio Subsystem
•
One Microphone
•
Dual Speaker
•
3.5mm Audio Jack 4ring (with Mic)
Camera
•
1-2
2M Fixed focus
Hardware Specifications and Configurations
Connectivity
Wi-Fi
•
IEEE 802.11 b/g/n
Bluetooth
•
Bluetooth® 2.1+EDR
•
Micro USB 2.0 Type B for Client
•
USB 2.0 Host
USB
GPS/A-GPS
•
Wi-Fi SKU: Broadcom - stand alone, A-GPS not supported
Expansion Slot
•
MicroSD memory card up to 32G (SDHC 2.0 compatible)
•
Capacitive Multi-Touch Screen
•
Function buttons
Input
Side (mechanical key):
•
Volume Up, Volume Down, Screen Lock
•
Power
Sensors
•
G-Sensor
•
Gyro-meter
Dimensions and Weight
Dimension
•
260.0 (H) x 175 (W) x 12.4 (D) mm (with bezel)
Weight
•
705g
Power Adapter and Battery
Battery
•
Rechargeable Lithium-Ion polymer battery
•
Capacity 24W (3280mAh)
Power Adapter
•
Voltage range/frequency: 100 ~ 240V AC, 50/60 Hz
•
DC output: 12V and 1.5 A, 18W
Hardware Specifications and Configurations
1-3
Others
•
Reset hole
Green Requirement
•
Rohs compliance
•
WEEE compliance
•
Halogen free, at least PVC free
•
SMT Green process
Accessory
In Box
•
USB cable
•
Charger + Plug
•
QSG
NOTE:
Protective film is not included.
Optional
1-4
•
MicroSD card
•
Pouch
Hardware Specifications and Configurations
Tablet tour
Front View
1
2
Figure 1:1. Front View
#
Item
Description
1
Camera
A 2-megapixel camera for video chatting and self-portrait images.
2
Touch Screen
10.1-inch, 1280 x 800 capacitive touch screen.
Hardware Specifications and Configurations
1-5
Rear View
1
1
Figure 1:2. Rear View
#
1
1-6
Item
Speakers
Description
Emits stereo audio.
Hardware Specifications and Configurations
Top View
1
2
Figure 1:3. Top View
#
Icon
Item
Description
1
Screen Rotation
Lock Switch
Use this switch to lock the screen rotation or allow the
screen to match the tablet’s orientation.
2
Volume Control
Increases or decreases the tablet volume.
Hardware Specifications and Configurations
1-7
Left View
1
2
3
4
5
Figure 1:4. Left View
#
1-8
Icon
Item
Description
1
Power Button
• Long press to turn the tablet on.
• Press briefly to turn the screen on/off or enter sleep
mode.
• Press and hold to turn the tablet off.
2
Headset Jack
Connects to stereo headphones.
3
Micro USB Port
(slave)
Connects to a computer with a USB cable.
4
USB Port (host)
Connects USB devices to the tablet.
5
Card Slot and
Reset Hole Cover
• Insert a microSD card into the slot under this cover.
• Insert a pointed object, such as a paper clip, into the
reset hole to reset the tablet to its factory defaults.
Hardware Specifications and Configurations
Right View
1
Figure 1:5. Right View
#
1
Icon
Item
AC Adapter Jack
Hardware Specifications and Configurations
Description
Connects to the power adapter.
1-9
1-10
DC IN
CHARGER
TI TPS51220
5V/3.3V BUCK
Touch Screen
CANDO + Atmel
2S1P BATT
1.2V
BUCK
1.8V
BUCK
WIFI
LVDS bridge
SDIO Card Slot
FM2018
EC_SMB
EC KB930
SPI
AP_SMB(3.3V)
12C
Nvidia Tegra T20
+3.7V_SM2
ON/OFF #
LDO 0~9 for CPU
+1V_SM0 for CPU
+1.2V_SM1 for CPU
PMU TI TPS658621C
PWR_12C (1.8V)
2M CAMERA
Module
Host USB
Client USB
INT MIC
EXT MIC
SPKR AMP
ALC105
2M CAMERA Module
Temperature
Sensor-NCT-1008
Audio Codec
Wolfson WM8903
CSI B (1.2V)
LPDDR2 X 1
512MB / 1GB
eMMC NAND 4.3 / 4.41
FM2018
Echo & Noise Cancel
CAM_12C (1.8V)
USB3
USB1
EC_SMB
DAP1 (1.8V)
(1.2V , 1.8V)
DDR2 32bits
8 bits HSMMC
+5V_ALW Input
GPIO
HSIC
USB +
mini-B
connector
AUDIO
VI&DSI/CSI
DDR
NAND Ctrl
EC_RESMUE
core & fuse
SDIO3
OSC,PLL,
UART
DAP4
SDIOI
ULPI
HDMI
LCD
VGA
SPI ROM
GEN2_12C(1.8V)
Audio Codec
WM-8903
GEN1_12C(1.8V)
SDIO3(3.3V)
12MHz
UART2(1.8V)
UART3(1.8V)
DAP4(1.8V)
SDIOI(1.8V)
12C Level shifter
Accelerometer
KXTF9-4100
IME_12C(1.8V)
GYRO
MPU-3050
BCM4751
GPS Module
AW-NH611
WIFI/BT
BT_MIC
module
BT
12C Level shifter
BATT IN
GEN1_12C(3.3V)
T20 GEN2 12C
AP_SMB(3.3V)
EDID
10.1’’LVDS panel
RGB(1.8V)
Ecomposs
AK6975C
INT Speaker
HeadPhone
System Block Diagram
Figure 1:6. System Block Diagram
Hardware Specifications and Configurations
Specifications Table
Computer specifications
Item
Metric
Imperial
Dimensions
Length
260 mm
10.23 in
Width
175 mm
6.89 in
Height (front to rear)
12.4 mm
0.489 in
Weight (equipped with optical
drive, flash drive, and battery)
Under 650g for Wi-Fi SKU
Under 1.432 lbs
Weight (equipped with optical
drive, flash drive, and without
battery)
N/A
N/A
Input power
Operating voltage
AC Input: 100V ~ 240V DC Output: 18W, 12V/1.5A
Operating current
DC Output: 1.5A
Temperature
Operating
-25º ~ 60ºC
-13º ~ 140ºF
Non-operating
-30º ~ 70ºC
-22º ~ 158ºF
Relative humidity
Operating
5% ~ 90%
Non-operating
0% ~ 90%
Maximum altitude (unpressurized)
Operating
0 cm ~ 63 cm
0 ~ 2.07 ft.
Non-operating
0 cm ~ 63 cm free drop on
steal
0 ~ 2.07 ft. free drop on steal
Shock
Operating
Amplitude: 105 g
Non-operating
Amplitude: 220 g
Random vibration
Operating
1.644 g
Non-operating
1.644 g
NOTE:
Applicable product safety standards specify thermal limits for plastic surfaces. The computer
operates well within this range of temperatures.
Hardware Specifications and Configurations
1-11
System Board Major Chips
Item
CPU
1-12
Specification
Tegra 250 Dual Cortex A9,1GHz
Ultra Low Power GeForce® GPU
Graphics Processor
Ultra Low Power GeForce® GPU supporting OpenGL® ES 2.0,
with programmable floating point pixel shaders and vertex
shaders
LVDS transmitter
SN75LVDS83DGGRG4
PMU
TI TPS658621AZGUR
LDDR2
MT46H64M32L2JG-5IT:A
ULPI Phy for USB
N/A
Bluetooth
AW-NH611
Wireless
AW-NH611
GPS
BCM4751IFBG
GPS Low-Noise Amplifier
MAX2659ELT+
TOUCH controller
mXT768E
eMMC
8G/16G (Base on Acer’s AVL)
CAMERA
Aptina SOC 2031, 2M pixel
Thermal Sensor
NCT1008CMT3R2G
Audio codec
WM8903LGEFK-RV
Audio Amplifier
ALC105-GR
Echo Cancellation
FM2018WE-380
Battery Charger
ISL6251AHAZ-T
Embedded Controller IC
KB930QF-A1
Compass
N/A
Gyro
MPU-3050
G-Sensor
KXTF9-4100
ALS/Proximity
N/A
Hardware Specifications and Configurations
Processor
Item
Specification
CPU
Dual-core ARM® Cortex-A9 MPCore™ Processor Up to 1 GHz
CPU package
664-ball FCBGA, 23 x 23 mm, 0.8 mm pitch
NOTE:
No CPU Fan in this product.
Processor Specifications
Item
CPU
Speed
Cores
Bus Speed
(FSB/DMI/QBI)
Mfg Tech
Cach
e Size
Package
Tegra 2
Series
1 GHz
Dual
Core
N/A
40nm
LPG
TSMC
N/A
23 x 23
mm
FCBGA
Core
Voltage
1.0-1.2V
System Memory
Item
Specification
Memory controller
Embed in CPU
Memory size
Up to 1 GB LPDDR2
No Graphics Controller
No BIOS Setup Menu for this product
LAN Interface
Item
Specification
LAN Chipset
On board LAN not supported
LAN connector type
N/A
LAN connector location
N/A
No Keyboard for this product
Hardware Specifications and Configurations
1-13
Hard Disk Drive Interface
Item
Specification
Vendor &
Model Name
Kingston
KE44B-26BN/
16GB
Kingston
KE44B-26BN/
8GB
Capacity
(GB)
16G
8G
SanDisk
SDIN5C1-16G
16G
SanDisk
SDIN5C2-8G
8G
DC Power Requirements
VCC: 2.85V
VCCQ: 1.8V
Voltage
tolerance
Audio Codec Interface
Item
Specification
Audio Controller
WM8903LGEFK-GV
Audio onboard or optional
On board
Mono or Stereo
Stereo
Resolution
24-bit data resolution
Compatibility
I2S Interface;
Sampling rate
Sample rate up to 44.1KHz
Internal microphone
Yes
Internal speaker/quantity
Yes/(1W stereo speakers x1)
Phone Jack
HP_Out + MIC
• 4.5mW power consumption for DAC to headphone
playback
• DAC SNR 96dB typical, THD -86dB typical
• ADC SNR 92dB typical, THD -80dB typical
• Control sequencer for pop minimized start-up and shutdown
• Single register write for default start-up sequence
• Integrated FLL provides all necessary clocks
Feature
1-14
•
•
Self-clocking modes allow processor to sleep
All standard sample rates from 8kHz to 96kHz
•
•
•
•
•
•
•
•
Stereo digital microphone input
3 single ended inputs per stereo channel
1 fully differential mic / line input per stereo channel
Digital Dynamic Range Controller (compressor / limiter)
Digital side tone mixing
Ground-referenced headphone driver
Ground-referenced line outputs
Stereo differential line driver for direct interface to
WM9001 speaker driver
• 40-pin QFN package (5x5mm)
Hardware Specifications and Configurations
Audio Amplifier IC
Item
Specification
Amplifier IC
ALC105-GR
Feature
• Single-Ended stereo analog input
• BTL (Bridge-Tied Load) output provides up to 3W per
channel driving capability into 4Ω speaker load (5V power
is supplied)
• No external output L-C filter required
• Supports pop noise suppression
• Configurable input to output boost gain ration
(+11dB/+14dB/+19dB/+25dB)
• Speaker amplifier power supplies from 3.3V to 5V
• 10µA Shut Down current
• High PSRR: 77dB
• DFN-12 package
LED 10.1”
Item
Specification
Vendor/model name
AUO _ B101EVT03 V0
10.1”(10.07”) WXGA 16:10 Color TFT-LCD with LED
Backlight design
Screen Diagonal (mm)
255.85 mm
Active Area (mm)
216.96 mm x 135.6 mm
Display resolution (pixels)
1280 x 3(RGB) x 800
Pixel Pitch (mm)
0.1695 mm 0.1695 mm
Typical White Luminance
(cd/m2) also called Brightness
Typ: 300 cd/m2
Min.: 255 cd/m2
Contrast Ratio
Typ: 1300
Min.: 1000
Response Time (Optical Rise
Time/Fall Time) misc.
Typ: 35 mS
Min.: 25 mS
Typical Power Consumption
(watt)
Max:3.4 W
Weight (without inverter/touch
screen)
180g
Physical Size (mm)
229.95 mm x 149.6 mm x 5.2 max
Electrical Interface
1 channel LVDS
Hardware Specifications and Configurations
1-15
Item
Viewing Angle (degree)
Horizontal (Right) CR = 10
(Left)
Vertical (Upper) CR = 10
(Lower)
Specification
Min.: 80 (Right) / 80 (Left) / 80 (Upper) / 80 (Lower)
Typ: 85 (Right) / 85 (Left) / 85 (Upper) / 85 (Lower)
No LCD Inverter for this product
Display Supported Resolution (GPU Supported Resolution)
Resolution
1280 X 800 16:10
16 bits
32 bits
NVIDIA
X
X
V
Legend: V = Supported; X = Not supported
NOTE:
Resolution fixed at 1280 x 800. Not adjustable by end user.
Display Supported Resolution (LCD Panel Supported Resolution)
Resolution
1280 X 800 16:10
16 bits
32 bits
NVIDIA
X
X
V
Legend: V = Supported; X = Not supported
NOTE:
Resolution fixed at 1280 x 800. Not adjustable by end user.
Camera
Item
Specification
Vendor and model
Chicony CJFB233
Type
2.0M
Mini Card
Item
Specification
Number supported
0
Features
Not supported
3G Card
Item
Features
1-16
Specification
Not supported
Hardware Specifications and Configurations
Wireless Module 802.11b/g/n
Item
Specification
Chipset
AW-NH611 SIP (include Broadcom BCM4329)
Data throughput
802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n:MCS 0~7
Protocol
IEEE 802.11b/g/n, Wi-Fi compliant
Interface
SDIO/SPI
Connector type
I-PEX
Supported protocol
CCXv2/CCXv3/CCXv4/CCXv5, WFAEC
Bluetooth Module
Item
Specification
Chipset
AW-NH611 SIP (include Broadcom BCM4329)
Data throughput
Bluetooth 2.1+EDR data rates of 1,2, and 3Mbps
Protocol
Bluetooth 2.1+Enhanced Data Rate (EDR) / BT3.0+HS
Interface
UART
Connector type
I-PEX
Supported protocol
N/A
Battery
Item
Vendor & model name
Specification
SANYO BAT1012
Battery Type
Li-pol
Pack capacity
3280mAh/24Wh
Number of battery cell
2
Package configuration
2S1P
Hardware Specifications and Configurations
1-17
Video Interface
Item
Specification
Chipset
N/A (Graphic function is embedded in CPU)
Package
N/A
Interface
N/A
Compatibility
N/A
Sampling rate
N/A
VRAM
Item
Specification
Chipset
N/A
Memory size
N/A
Interface
N/A
USB Port
Item
Specification
USB compliance level
USB2.0
Modes
Host & Device
Speed
Low, Full and High
Number of USB port(s)
2 ports (1 port for Host, 1 port for Device)
Location
two at the right side
Output Current
0A (micro USB port, Device mode)
1.5A (USB port, Host mode)
HDMI Port
Item
1-18
Specification
Compliance level
N/A (Not supported)
Data throughput
N/A
Number of HDMI port(s)
N/A
Location
N/A
Hardware Specifications and Configurations
AC Adapter
Item
Specification
Total output power
18W
Maximum input AC current
0.5A(RMS)Max. @120Vac
0.25A(RMS)Max. @240Vac
Inrush current
40A Max. for 120VAC at Max load
60A Max. for 240VAC at Max load
(At cold start)
Efficiency
Meet EPA 2.0
System Power Management
Item
Specification
Mech. OFF
Devices in the system are turned off completely.
Power OFF
OS initiated shutdown. All devices in the system are turned
off completely.
Working
The most of devices are turned on. Individual devices such
as the CPU may be power managed in this state.
Deep Sleep
CPU core power off
Others devices are standby
Power Specification
Legacy
Mode
ACPI Mode
Mech. Off (G3)
All devices in the system are turned off completely
Soft Off (G2/S5)
OS initiated shutdown. All devices in the system are
turned off completely.
Working (G0/S0)
Individual devices such as the CPU and eMMC may be
power managed in this state.
S3 Sleeping State
CPU suspend
Audio Power Down
eMMC Power Down
LCD power off
MIC power off
S4 Sleeping State
N/A
Off
On
Power Management
Hardware Specifications and Configurations
1-19
MicroSD Card Reader
Item
Specification
Chipset
SD function is supported by CPU.
Package
N/A
Interface
SDIO
Maximum supported size
Follow up SD card spec
Features
Storage cards with adapter: microSD™
System LED Indicator
Item
System state
Specification
• White color solid on: System on
• White color and amber color off: System off
• Amber color: Battery in charging
System DMA Specification (N/A)
Hardware DMA
System Function
DMA0
DMA1
DMA2
DMA3
DMA4
DMA5
DMA6
DMA7
NOTE:
ExpressCard controller can use DMA 1, 2, or 5.
System Interrupt Specification (N/A)
Hardware IRQ
System Function
IRQ0
IRQ1
IRQ2
IRQ3
1-20
Hardware Specifications and Configurations
Hardware IRQ
System Function
IRQ5*
IRQ6
IRQ7*
IRQ8
IRQ9*
IRQ10*
IRQ11
IRQ12
IRQ13
IRQ14
IRQ15
NOTE:
Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
NOTE:
ExpressCards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either
the infrared or the serial port may assert IRQ3 or IRQ4.
System IO Address Map (N/A)
I/O Address (hex)
System Function (Shipping Configuration)
000 - 00F
010 - 01F
020 - 021
022 - 024
025 - 03F
02E - 02F
040 - 05F
044 - 05F
060
061
062 - 063
064
Hardware Specifications and Configurations
1-21
I/O Address (hex)
System Function (Shipping Configuration)
065 - 06F
070 - 071
072 - 07F
080 - 08F
090 - 091
092
093 - 09F
0A0 - 0A1
I/O Address (hex)
0A2 - 0BF
0C0 - 0DF
0E0 - 0EF
0F0 - 0F1
0F2 - 0FF
100 - 16F
170 - 177
178 - 1EF
1F0 - 1F7
1F8 - 200
201
202 - 21F
System IO Address Specification (N/A)
I/O Address (hex)
System Function (Shipping Configuration)
220 - 22F
230 - 26D
26E - 26
278 - 27F
280 - 2AB
1-22
Hardware Specifications and Configurations
I/O Address (hex)
System Function (Shipping Configuration)
2A0 - 2A7
2A8 - 2E7
2E8 - 2EF
2F0 - 2F7
2F8 - 2FF
300 - 31F
320 - 36F
370 - 377
378 - 37F
380 - 387
388 - 38B
38C - 3AF
3B0 - 3BB
3BC - 3BF
3C0 - 3DF
3E0 - 3E1
3E2 - 3E3
3E8 - 3EF
3F0 - 3F7
3F8 - 3FF
CF8 - CFB
(PCIDIVO-1)
(PCIDIVO-1)
Hardware Specifications and Configurations
1-23
CHAPTER 2
Diagnostic Utilities
Diagnostic Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Diagnostic Tool SOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Tool Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Uninstallation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Diagnostic Utilities
Introduction
The ICONIA TAB A200 has a software tool designed to diagnose problems with its hardware
components.
Diagnostic Tool SOP
Preparation
•
•
•
•
Diagnostic Tool - ACTP.zip
USB Driver of A200 for PC
USB cable
MicroSD card
Tool Installation
1.
Install the USB driver in PC/NB.
2.
Connect the device to the PC/NB using a USB cable.
3.
Enable USB debugging in the device (Settings → Applications → USB debugging).
Figure 2:1. USB Debugging Mode
4.
On the PC/NB, unzip “ACTP.zip”.
Diagnostic Utilities
2-2
5.
Run “Install QCJ00.bat”.
Figure 2:2. ACTP Folder Directory
6.
On the device, go to the applications screen and look for the diagnostic tool named “ACTP”.
Figure 2:3. Device Applications Screen
7.
2-3
Tap the ACTP icon to start the testing process. (Figure 2:3)
Diagnostic Utilities
Main Menu
The diagnostic tool tests the Touch Panel, Display, Buttons, Speaker, Microphone, Camera, SD
card and Vibrator functionality. Select the function(s) you want to test.
Tap OK to start.
Step1 –
Select item(s)
Step2 –
Click
“O K”tostar
ttesting
Figure 2:4. Diagnostic Tool Main Menu
1. Multi-touch Test (Touch Panel)
Draw your finger along the yellow squares.
The result is a “Pass” if you fill all the yellow squares and a “Fail” if you do not. The program returns
to the main menu after the test is finished.
Figure 2:5. Multi-touch Test
Diagnostic Utilities
2-4
2. Touch Linearity Test (Touch Panel)
Draw your finger along the yellow squares.
The result is a “Pass” if you fill all the yellow squares and a “Fail” if you do not. The program returns
to the main menu after the test is finished.
Figure 2:6. Touch Linearity Test
3. RGB (Display)
Continue to tap the screen to display changes. Use this test to verify abnormal lines or dead pixels
on LCD screen.
Finish
Figure 2:7. RGB Test
2-5
Diagnostic Utilities
4. Hardware Keys Test (Keys)
Press the volume up, volume down and lock keys to verify if all keys work. A color change to green
means key function works.
Figure 2:8. Hardware Keys Test
5. Front Camera
Aim the front side of the device at an object. Tap the “Photograph” icon to test the picture taking
functionality.
Figure 2:9. Rear Camera Test
Diagnostic Utilities
2-6
6. Speakers
Loud tone sounds in the left speaker and then switches to the right speaker.
Figure 2:10. Speakers Test
7. Front Microphone
Tap the screen to start the test. When the “Recording” screen appears, speak into the device.
Check if the voice is recorded when the screen switches to the “Playing” screen.
Figure 2:11. Front Microphone Test
2-7
Diagnostic Utilities
8. SD Card (SD Read/Write Test)
Insert a microSD card into the device. Start the SD read and write test. The screen shows success
if the test is passed.
Figure 2:12. SD Card Test
9. Vibrator
The device starts vibrating three times every half a second and then displays the final screen as
below.
Figure 2:13. Vibrator Test
Diagnostic Utilities
2-8
Uninstallation Procedures
The diagnostic tool MUST be uninstalled once testing is done.
IMPORTANT:
DO NOT distribute this tool outside of the service center.
1.
On the device, go to the applications screen. Touch and hold the “ACTP” icon and drag it to the
“Uninstall” icon.
Figure 2:14. Applications Menu Screen
2.
When the “Uninstall” icon turns red, release your finger. The screen below appears, click “OK”
to uninstall.
Figure 2:15. Confirm Uninstall Screen
2-9
Diagnostic Utilities
3.
The “Uninstall finished” message appears when the process is complete.
Figure 2:16. Uninstall Finished
Diagnostic Utilities
2-10
CHAPTER 3
Service and Maintenance
Service and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Recommended Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Maintenance Flowchart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
SD Card Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
SD Card Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Lower Case Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Lower Case Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
DC-In Cable Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19
DC-In Cable Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Battery Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Speaker Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Speaker Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Touch Panel Control Cable Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32
Touch Panel Control Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34
LVDS Cable Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36
LVDS Cable Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38
Microphone Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-40
Microphone Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-41
WLAN Antenna Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-42
WLAN Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-44
GPS Antenna Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-46
GPS Antenna Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-48
Mainboard Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-50
Mainboard Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53
Front Camera Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-55
Front Camera Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-56
Service and Maintenance
Introduction
This chapter contains general information about the tablet, a list of tools needed to perform the
required maintenance and step by step procedures on how to remove and install components from
the tablet computer.
Recommended Equipment
The following tools are required to perform maintenance on the tablet:
•
Wrist grounding strap and conductive mat
•
Flat screwdriver
•
Philips screwdrivers
•
Pointed plastic pry or similar object
Screw Name
Screw Type
Quantity
M 2.0 x 4.0 Ni
12
M 2.0 x 3.0
9
Service and Maintenance
3-2
Maintenance Flowchart
The flowchart in Figure3-1 provides a graphic representation of the module removal and installation
sequences. It provides information on what components need to be removed and installed during
servicing
SD
Lower Case
DC-in Cable
Battery
Speaker
LVDS cable
Touch Pad
Cable
Wifi / Bluetooth
Antenna
Microphone
Mainboard
GPS
Antenna
Camera 2M
Figure 3:1. Maintenance Flow
3-3
Service and Maintenance
Getting Started
The flowchart (Figure 3:1, page 3-3) identifies sections illustrating the entire removal and
installation sequence. Observe the order of the sequence to avoid damage to any of the hardware
components.
Perform the following prior to performing any maintenance procedures:
1.
Place the system on a flat work surface.
2.
Disconnect the AC Adapter and remove all cables from the system and its peripherals.
3.
Make sure the system is completely powered down.
4.
To make sure the system is completely powered down, press and hold the Power button (A) for
4 seconds. (Figure 3:2)
a.
If the device is in powered down mode, allow the device to complete the boot process
(approximately 10 seconds). Then, power down normally.
b.
If the device is in sleep mode, wait for the Home Screen to clear. Then, power down
normally.
A
Figure 3:2. Device Overview with Power Button
5.
Press and hold the Power button for 4 seconds to show the Tablet Options dialog.
6.
Select Power Off to power down the device.
7.
From the Power Off dialog, select OK.
Service and Maintenance
3-4
SD Card Removal
1.
Open the SD card cover.
Figure 3:3. Opening the SD Card Cover
2.
Push the SD card to eject it from the slot, and then remove the card.
Figure 3:4. Removing the SD Card
3-5
Service and Maintenance
3.
Secure the SD card cover.
Figure 3:5. Securing the SD Card Cover
Service and Maintenance
3-6
SD Card Installation
1.
Open the SD card cover. (Figure 3:3, page 3-5)
2.
Push the SD card into the slot until it clicks into place.
Figure 3:6. Installing the SD Card
3.
3-7
Close the SD card cover. (Figure 3:5, page 3-6)
Service and Maintenance
Lower Case Removal
Prerequisite:
SD Card Removal on page 3-5
1.
Open the SD card cover.
Figure 3:7. Opening the SD Card Cover
2.
Insert the pointed plastic pry into the slot next to the SD card cover to unlock the latch.
Figure 3:8. Unlocking the Left IO Cover Latches (1 of 4)
Service and Maintenance
3-8
3.
Starting from the edge shown in Figure 3-8, release the latches from the bezel with your hands.
Figure 3:9. Unlocking the Left IO Cover Latches (2 of 4)
4.
Insert the plastic pry into the slot to unlock the lower latch.
Figure 3:10. Unlocking the Left IO Cover Latches (3 of 4)
3-9
Service and Maintenance
5.
Release the latches from the bezel with your hands.
Figure 3:11. Unlocking the Left IO Cover Latches (4 of 4)
6.
Insert the plastic pry into the gap between the AC adapter jack and the right IO cover, and then
pry to unlock the right IO cover latch.
Figure 3:12. Unlocking the Right IO Cover Latches (1 of 2)
Service and Maintenance
3-10
7.
Release the latches from the bezel with your hands.
Figure 3:13. Unlocking the Right IO Cover Latches (2 of 2)
8.
Remove the screws from the bezel.
Figure 3:14. Removing the Screws
3-11
Service and Maintenance
9.
Release the top side of the lower case from the latches of the bezel.
Figure 3:15. Releasing the Side Latches (1 of 4)
10. Release the bottom side of the lower case from the latches of the bezel.
Figure 3:16. Releasing the Side Latches (2 of 4)
Service and Maintenance
3-12
11. Release the right side of the lower case from the latches of the bezel.
Figure 3:17. Releasing the Side Latches (3 of 4)
12. Remove the lower case from the bezel.
Figure 3:18. Releasing the Side Latches (4 of 4)
3-13
Service and Maintenance
Lower Case Installation
1.
Make sure the Lock key on the lower case (A) and the Lock key on the bezel (B) are on the
same direction.
A
B
Figure 3:19. Checking the Lock Key Position
2.
Align the left edge of the lower case with the connectors slot on the bezel.
Figure 3:20. Installing the Lower Case (1 of 4)
Service and Maintenance
3-14
3.
Using the plastic pry, slightly push the right side of the lower case to secure the right side of the
bezel.
Figure 3:21. Installing the Lower Case (2 of 4)
4.
Secure all sides of the lower case to the latches on the bezel.
Figure 3:22. Installing the Lower Case (3 of 4)
3-15
Service and Maintenance
5.
Install and secure the screws to the bezel.
Figure 3:23. Installing the Lower Case (4 of 4)
6.
Install and secure the right IO cover to the bezel latches.
Figure 3:24. Installing the Right IO Cover
Service and Maintenance
3-16
7.
Install and secure the lower left IO cover to the bezel latches.
Figure 3:25. Installing the Left IO Cover (1 of 2)
8.
Install and secure the upper left IO cover to the bezel latches.
Figure 3:26. Installing the Left IO Cover (2 of 2)
3-17
Service and Maintenance
9.
Close the SD card cover.
Figure 3:27. Closing the SD Card Cover
Table 3:1. Lower Case Screws
Screw Name
M 2.0 x 4.0 Ni
Service and Maintenance
Screw Type
Quantity
4
3-18
DC-In Cable Removal
Prerequisite
Lower Case Removal on page 3-8
1.
Remove the protective tape covering the DC-In cable.
Figure 3:28. Removing the Protective Tape
2.
Disconnect the DC-In cable from the mainboard connector.
Figure 3:29. Disconnecting the DC-In Cable
3-19
Service and Maintenance
3.
Pull to detach the cable with adhesive (C) and the DC-In jack (D) from the slot on the bezel.
D
C
Figure 3:30. Removing the DC-In Cable
Service and Maintenance
3-20
DC-In Cable Installation
1.
Install the DC-In cable jack and the cable adhesive.
Figure 3:31. Installing the DC-In Cable (1 of 3)
2.
Connect the DC-In cable to the mainboard connector.
Figure 3:32. Installing the DC-In Cable (2 of 3)
3-21
Service and Maintenance
3.
Install and secure the protective tape covering the DC-In cable.
Figure 3:33. Installing the DC-In Cable (3 of 3)
4.
Install the lower case (see Lower Case Installation on page 3-14).
Service and Maintenance
3-22
Battery Removal
Prerequisite:
DC-In Cable Removal on page 3-19
1.
Disconnect the battery cable from the mainboard connector.
Figure 3:34. Disconnecting the Battery Cable
2.
Remove the screws securing the battery to the mainboard and the bezel.
Figure 3:35. Removing the Battery Screws
3-23
Service and Maintenance
3.
Remove the battery.
Figure 3:36. Removing the Battery
Service and Maintenance
3-24
Battery Installation
1.
Install the battery on the bezel.
Figure 3:37. Installing the Battery
2.
Secure the screws to the bezel and the mainboard.
Figure 3:38. Attaching the Battery Screws
3-25
Service and Maintenance
3.
Connect the battery connector to the mainboard connector, and insert the cables into the gap
between the mainboard and the battery.
Figure 3:39. Connecting the Battery Cable
4.
Install the DC-In cable (see DC-In Cable Installation on page 3-21).
Table 3:2. Battery Screws
Screw Name
M 2.0 x 4.0 Ni
Service and Maintenance
Screw Type
Quantity
7
3-26
Speaker Removal
Prerequisite:
Battery Removal on page 3-23
1.
Remove the protective tape covering the LVDS cable.
Figure 3:40. Removing the LVDS Protective Tape
2.
Remove the protective tape covering the speakers and the touch panel control cables.
Figure 3:41. Removing the Cables Protective Tape
3-27
Service and Maintenance
3.
Disconnect the speakers connector from the mainboard connector (A).
B
A
Figure 3:42. Disconnecting the Speakers and Touch Module Cables
4.
Disconnect the touch module cable (B) and release the speakers cable from the guides.
(Figure 3:41)
CAUTION:
The touch module cable may be damaged when folded. Do not fold the touch module cable.
5.
Remove the screws (C, D) from the bezel.
D
E
C
E
Figure 3:43. Removing the Speakers
6.
Remove the speakers (E) from the bezel. (Figure 3:43)
Service and Maintenance
3-28
Speaker Installation
1.
Install the speakers (A) and secure the screws (B, C) on the bezel.
C
A
B
A
Figure 3:44. Installing the Speakers
2.
Route the speakers cable with the guides on the bezel.
Figure 3:45. Routing the Speakers Cable
3-29
Service and Maintenance
3.
Connect the touch module cable connector (D).
E
D
Figure 3:46. Connecting the Cable Connectors
4.
Connect the Speakers cable connector (E) to the mainboard. (Figure 3:46)
5.
Secure the protective tape covering the speakers and the touch panel control cables.
Figure 3:47. Attaching the Cables Protective Tape
Service and Maintenance
3-30
6.
Secure the protective tape covering the LVDS cable.
Figure 3:48. Attaching the LVDS Protective Tape
7.
Install the battery (see Battery Installation on page 3-25).
Table 3:3. Speakers Screws
Screw Name
3-31
Screw Type
Quantity
M 2.0 x 4.0 Ni
1
M 2.0 x 3.0
2
Service and Maintenance
Touch Panel Control Cable Removal
Prerequisite:
Battery Removal on page 3-23
1.
Remove the protective tape covering the LVDS cable.
Figure 3:49. Removing the LVDS Protective Tape
2.
Remove the protective tape covering the speakers and the touch panel control cables.
Figure 3:50. Removing the Cables Protective Tape
Service and Maintenance
3-32
3.
Disconnect the touch panel control cable connectors.
Figure 3:51. Disconnecting the Touch Panel Control Cable Connectors
3-33
Service and Maintenance
Touch Panel Control Cable Installation
1.
Connect the touch panel control cable connectors.
Figure 3:52. Connecting the Touch Panel Control Cable Connectors
2.
Secure the protective tape covering the speakers and the touch panel control cables.
Figure 3:53. Attaching the Cables Protective Tape
Service and Maintenance
3-34
3.
Secure the protective tape covering the LVDS cable.
Figure 3:54. Attaching the LVDS Protective Tape
4.
3-35
Install the battery (see Battery Installation on page 3-25).
Service and Maintenance
LVDS Cable Removal
Prerequisite:
Battery Removal on page 3-23
1.
Remove the protective tape covering the LVDS cable.
Figure 3:55. Removing the LVDS Protective Tape
2.
Disconnect the LVDS cable connector from the mainboard connector.
Figure 3:56. Disconnecting the LVDS Cable (1 of 2)
Service and Maintenance
3-36
3.
Disconnect the LVDS cable connector from the LCD panel connector.
Figure 3:57. Disconnecting the LVDS Cable (2 of 2)
3-37
Service and Maintenance
LVDS Cable Installation
1.
Connect the LVDS cable connector to the LCD panel connector.
Figure 3:58. Connecting the LVDS Cable (1 of 2)
2.
Connect the LVDS cable connector to the mainboard connector.
Figure 3:59. Connecting the LVDS Cable (2 of 2)
Service and Maintenance
3-38
3.
Secure the protective tape to cover the LVDS cable.
Figure 3:60. Attaching the LVDS Cable Protective Tape
4.
3-39
Install the battery (see Battery Installation on page 3-25).
Service and Maintenance
Microphone Removal
Prerequisite:
Battery Removal on page 3-23
1.
Disconnect the microphone cable connector from the mainboard connector.
Figure 3:61. Disconnecting the Microphone Connector
2.
Remove the microphone from slot on the bezel.
Figure 3:62. Removing the Microphone
Service and Maintenance
3-40
Microphone Installation
1.
Install the microphone to the microphone slot of the bezel.
Figure 3:63. Installing the Microphone
2.
Connect the microphone cable connector to the mainboard connector.
Figure 3:64. Connecting the Microphone Cable Connector
3.
3-41
Install the battery (see Battery Installation on page 3-25).
Service and Maintenance
WLAN Antenna Removal
Prerequisite:
Battery Removal on page 3-23
1.
Disconnect the WLAN antenna connector from the mainboard connector.
Figure 3:65. Disconnecting the WLAN Antenna
2.
Remove the metallic tape securing the WLAN antenna to the bezel.
Figure 3:66. Removing the Metallic Tape
Service and Maintenance
3-42
3.
Remove the WLAN antenna.
Figure 3:67. Removing the WLAN Antenna
3-43
Service and Maintenance
WLAN Antenna Installation
1.
Align the WLAN antenna to the antenna slot on the bezel.
Figure 3:68. Installing the WLAN Antenna (1 of 3)
2.
Attach the metallic tape to secure the WLAN antenna to the bezel.
Figure 3:69. Installing the WLAN Antenna (2 of 3)
Service and Maintenance
3-44
3.
Connect the WLAN antenna connector to the mainboard connector.
Figure 3:70. Installing the WLAN Antenna (3 of 3)
4.
3-45
Install the battery (see Battery Installation on page 3-25).
Service and Maintenance
GPS Antenna Removal
Prerequisite:
Battery Removal on page 3-23
1.
Disconnect the GPS antenna connector from the mainboard connector.
Figure 3:71. Disconnecting the GPS Antenna
2.
Remove the adhesive tape securing the GPS antenna cable to the mainboard.
Figure 3:72. Removing the Cable Adhesive Tape
Service and Maintenance
3-46
3.
Remove the metallic tape securing the GPS antenna to the mainboard.
Figure 3:73. Removing the Antenna Metallic Tape
4.
Remove the GPS antenna from the bezel.
Figure 3:74. Removing the GPS Antenna
3-47
Service and Maintenance
GPS Antenna Installation
1.
Align the GPS antenna to the antenna slot on the bezel.
Figure 3:75. Installing the GPS Antenna (1 of 4)
2.
Attach the metallic tape to secure the GPS antenna to the mainboard.
Figure 3:76. Installing the GPS Antenna (2 of 4)
Service and Maintenance
3-48
3.
Attach the adhesive tape to secure the GPS antenna cable to the mainboard.
Figure 3:77. Installing the GPS Antenna (3 of 4)
4.
Connect the GPS antenna connector to the mainboard connector.
Figure 3:78. Installing the GPS Antenna (4 of 4)
5.
3-49
Install the battery (see Battery Installation on page 3-25).
Service and Maintenance
Mainboard Removal
Prerequisite:
Battery Removal on page 3-23
1.
Disconnect the following cables from the mainboard connectors:
•
LVDS cable connector (A)
•
Speaker cable connector (B)
•
Touch panel control cable connector (C)
•
Microphone connector (D)
•
WLAN antenna cable connector (E)
C
A
B
E D
F
Figure 3:79. Disconnecting the Cables from the Mainboard
Service and Maintenance
3-50
2.
Disconnect the GPS antenna cable (F). (Figure 3:79, page 3-50)
a.
If the GPS antenna needs replacement, perform the procedures in GPS Antenna
Removal on page 3-46.
b.
If the GPS antenna does not need a replacement, do not detach the metallic tape securing
the GPS antenna to the mainboard. This may damage the metallic tape and cause the
GPS signal to deteriorate. Instead, perform the procedures below:
(1)
Disconnect the GPS antenna cable connector (F) from the mainboard
connector, and then pry to lift the circuit cover (G).
G
F
Figure 3:80. Disconnecting the GPS Antenna Cable
(2)
Open the circuit cover to detach the GPS antenna from the mainboard.
Figure 3:81. Detaching the GPS Antenna
3-51
Service and Maintenance
3.
Remove the screws securing the mainboard from the bezel.
Figure 3:82. Removing the Mainboard Screws
4.
Slowly lift the mainboard from the outer edge, and detach the camera cable connector from the
mainboard.
Figure 3:83. Removing the Mainboard
5.
Remove the mainboard from the bezel.
Service and Maintenance
3-52
Mainboard Installation
1.
Connect the camera cable connector to the mainboard connector.
Figure 3:84. Disconnecting the Camera Cable
2.
Align the mainboard to the bezel guides and install and secure the mainboard screws.
Figure 3:85. Securing the Mainboard Screws
3-53
Service and Maintenance
3.
Connect the following cables:
•
LVDS cable connector (A)
•
Speaker cable connector (B)
•
Touch panel control cable connector (C)
•
Microphone connector (D)
•
WLAN antenna cable connector (E)
•
GPS antenna cable connector (F)
C
A
B
E D
F
Figure 3:86. Mainboard Screws
4.
Install the battery (see Battery Installation on page 3-25)
Table 3:4. Mainboard Screws
Screw Name
M 2.0 x 3.0
Service and Maintenance
Screw Type
Quantity
7
3-54
Front Camera Removal
Prerequisite:
Mainboard Removal on page 3-50
1.
Remove the camera from the camera slot on the bezel.
Figure 3:87. Removing the Front Camera
3-55
Service and Maintenance
Front Camera Installation
1.
Connect the camera cable connector to the mainboard connector.
Figure 3:88. Connecting the Camera Cable
2.
Install the camera to the camera slot on the bezel.
Figure 3:89. Installing the Camera
3.
Install the mainboard (see Mainboard Installation on page 3-53).
Service and Maintenance
3-56
CHAPTER 4
Troubleshooting
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Power On Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
No Display Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
LCD Picture Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Touch Screen Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Internal Speaker Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Internal Microphone Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
USB Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Front Camera Failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Wireless Function Test Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
GPS Function Test Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Other Functions Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Troubleshooting
This chapter contains information about troubleshooting common problems associated with the
tablet.
General Information
The following procedures are a guide for troubleshooting computer problems. The step by step
procedures are designed to be performed as described.
NOTE:
The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype
cards, or modified options can give false errors and invalid system responses.
1.
Obtain as much detail as possible about the problem.
2.
If possible, verify the symptoms by re-creating the failure through diagnostic tests or by
repeating the operation that led to the problem.
3.
Use Table 4-1 with the verified symptom(s) to determine the solution.
Table 4:1. Verified Symptoms
Symptoms
See
Power on Issues
Figure 4:1. Power On Issues on page 4-3
No Display Issues
Figure 4:2. No Display Issues on page 4-4
LCD Picture Failure
Figure 4:3. LCD Picture Failure on page 4-5
Touch Screen Failure
Figure 4:4. Touch Screen Failure on page 4-6
Internal Speaker Failure
Figure 4:5. Internal Speaker Failure on page 4-7
Internal Microphone Failure
Figure 4:6. Internal Microphone Failure on page 4-8
USB Failure
Figure 4:7. USB Failure on page 4-9
Front Camera Failure
Figure 4:8. Front Camera Failure on page 4-10
Wireless Function Test Failure
Figure 4:9. Wireless Function Test Failure on page
4-11
GPS Function Test Failure
Figure 4:10. GPS Function Test Failure on page
4-12
Other Functions Failure
Page 4-13
4.
If the issue is still not resolved, see Online Support Information on page 9-2.
Troubleshooting
4-2
Power On Issues
If the system does not power on, perform the following:
Start
OK
Check AC cable / BATT
only power on
NG
Swap AC cable / BATT
OK
Swap M/B
Figure 4:1. Power On Issues
4-3
Troubleshooting
No Display Issues
If the system does not display, perform the following:
Start
OK
Can
power on
NG
Go to no power
Trouble shooting step
OK
NG
Check LCD cable
Swap LCD cable
OK
LCD panel
NG
Swap LCD panel
OK
Swap M/B
Figure 4:2. No Display Issues
Troubleshooting
4-4
LCD Picture Failure
If the LCD picture fails, perform the following:
Start
OK
NG
Check LCD cable
Swap LCD cable
OK
Check LCD panel
NG
Swap LCD panel
OK
Swap M/B
Figure 4:3. LCD Picture Failure
4-5
Troubleshooting
Touch Screen Failure
If the touch screen fails, perform the following:
Start
OK
NG
Check touch
screen cable
Swap touch screen cable
OK
NG
Check touch
screen small/B
Swap touch screen small/B
OK
Check touch
screen panel
NG
Swap touch screen panel
OK
Swap M/B
Figure 4:4. Touch Screen Failure
Troubleshooting
4-6
Internal Speaker Failure
If the internal speakers fail, perform the following:
Start
OK
Check SPK
NG
Swap SPK
OK
Swap M/B
Figure 4:5. Internal Speaker Failure
4-7
Troubleshooting
Internal Microphone Failure
If the internal microphone fails, perform the following:
Start
OK
Check the front MIC
and the back MIC
OK
Swap the
front MIC
NG
OK
Check the
front MIC
OK
Swap M/B
Check the
back MIC
NG
Swap the
back MIC
OK
Swap M/B
Figure 4:6. Internal Microphone Failure
Troubleshooting
4-8
USB Failure
If the USB fails, perform the following:
Start
OK
NG
Check the USB/B
to M/B FFC
Swap the USB/B
to M/B FFC
OK
Check the USB/B
NG
Swap the USB/B
OK
Swap M/B
Figure 4:7. USB Failure
4-9
Troubleshooting
Front Camera Failure
If the front camera fails, perform the following:
Start
OK
Check the
front camera
NG
Swap the
front camera
OK
Swap M/B
Figure 4:8. Front Camera Failure
Troubleshooting
4-10
Wireless Function Test Failure
If the wireless function fails, perform the following:
Start
OK
Check the
W/L antenna
NG
Swap the
antenna
OK
Swap M/B
Figure 4:9. Wireless Function Test Failure
4-11
Troubleshooting
GPS Function Test Failure
If the GPS function fails, perform the following:
Start
OK
Check the
GPS antenna
NG
Swap the
antenna
OK
Swap M/B
Figure 4:10. GPS Function Test Failure
Troubleshooting
4-12
Other Functions Failure
4-13
1.
Check the component connection to the mainboard.
2.
To test for mainboard fault, swap mainboard.
Troubleshooting
CHAPTER 5
Jumper and Connectors Location
Jumper and Connector Locations . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Mainboard Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Mainboard Bottom View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Jumper and Connector Locations
Mainboard Top View
SW2 SW3 SW5
SW4
LED3
JLINE1
JP70
JP72
JP9
SW6
VB1
Figure 5:1. Mainboard Top
Table 5:1. Mainboard Top Jumper and Connectors
Item
Description
Item
Description
SW2, SW3
Volume Key
JP70
Debug Connector
SW5
Lock Key
JP72
USB Connector
SW4
Power Button
JP9
MicroSD connector
LED3
Power / Battery LED
SW6
Reset Button
JLINE1
Audio Jack
VB1
Vibrator
Jumper and Connector Locations
5-2
Mainboard Bottom View
ANT5
JP14
ANT3
JMIC3
PJP3
PJP2
JLVDS3
JP58
JP55
Figure 5:2. Mainboard Bottom
Table 5:2.
Item
Mainboard Bottom Jumper and Connectors
Description
Item
Description
ANT5
Wi-Fi Antenna
JLVDS3
Panel Connector
JP14
2M Camera Connector
JP58
Touch Panel Control
Connector
JMIC3
MIC Connector
JP55
Speaker Connector
PJP3
DC-IN Connector
ANT3
GPS Antenna
PJP2
Battery Connector
Jumper and Connector Locations
5-3
CHAPTER 6
Field Replaceable Unit List
FRU (Field Replaceable Unit) List . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
Exploded Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
FRU List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Screw List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
FRU (Field Replaceable Unit) List
This chapter provides the FRU (Field Replaceable Unit) listing in global configurations for the
ICONIA TAB A200. Refer to this chapter whenever ordering for parts to repair or for RMA (Return
Merchandise Authorization).
NOTE:
When ordering FRU parts, check the most up-to-date information available on the regional web
or channel. Part number changes will not be noted on the printed Service Guide. For Acer
Authorized Service Providers, the Acer office may have a different part number code from those
given in the FRU list of this printed Service Guide. Users MUST use the local FRU list provided by
the regional Acer office to order FRU parts for repair and service of customer machines.
NOTE:
To scrap or to return the defective parts, users should follow local government ordinances or
regulations on proper disposal, or follow the rules set by the regional Acer office on how to return
the defective parts.
FRU (Field Replaceable Unit) List
6-2
Exploded Diagram
1
2
3
15
4
5
14
6
7
13
12
8
9
11
10
Figure 6:1. Main Assembly Exploded Diagram
FRU (Field Replaceable Unit) List
6-3
Table 6:1. Main Assembly Exploded Diagram
No.
Description
Acer P/N
1
LCD TOUCH MODULE INCL.
CONTROL BOARD and LVDS CABLE
6M.H8Q02.001
2
BATTERY
BT.00203.011
3
MAINBOARD
MB.H8P00.001
4
MICROPHONE
23.H8Q02.001
5
ANTENNA GPS
50.H8Q02.004
6
TOUCH CONTROL BOARD CABLE
50.H8Q02.002
7
SPEAKER L+R
23.H8Q02.002
8
LEFT IO COVER UP
42.H8Q02.002
9
LEFT IO COVER DOWN
42.H8Q02.003
10
RIGHT IO COVER
42.H8Q02.001
11
LOWER CASE ASSEMBLY - TITANIUM or
LOWER CASE ASSEMBLY - RED
60.H8Q02.001
60.H8W02.001
12
2M CAMERA SPONGE
47.H8Q02.001
13
CAMERA 2M
57.H8Q02.001
14
ANTENNA WIFI/BT
50.H8Q02.003
15
DC-IN CABLE
50.H8Q02.001
FRU (Field Replaceable Unit) List
6-4
FRU List
CATEGORY
Description
Part No.
ADAPTER
Adapter PHIHONG 18W 12V/1.5A Black PSA18R120P(AI)-R LF
AP.0180P.002
Adapter PHIHONG 18W 12V/1.5A 1.1x3.0x7.5
Black PSA18R-120P(AI)-R, w/i 150cm cable LF
AP.0180P.003
Battery SANYO BAT-1012 Polymer 2S1P SANYO
2 Cell 3260mAh Main COMMON
BT.00203.011
DC-IN CABLE
50.H8Q02.001
CABLE FOR TOUCH CONTROL BOARD
50.H8Q02.002
EXTERNAL HDMI CABLE
XZ.70200.117
EXTERNAL USB CABLE
XZ.70200.115
EXTERNAL USB CABLE W/WEEE LABEL
XZ.70200.171
AC CLIP 18W -EU
27.L0302.001
AC CLIP 18W -US
27.L0302.002
AC CLIP 18W -CN
27.L0302.003
AC CLIP 18W -UK
27.H6002.001
AC CLIP 18W -AU
27.H6002.002
AC CLIP 18W -ARG
27.H6002.003
AC CLIP 18W -BRZ
27.H6002.004
ANTENNA WIFI/BT
50.H8Q02.003
ANTENNA GPS
50.H8Q02.004
LVDS CABLE
50.H8Q02.005
BATTERY
CABLE
FRU (Field Replaceable Unit) List
6-5
CATEGORY
Description
Part No.
CASE / COVER / BRACKET ASSEMBLY
LOWER CASE ASSY - TITANIUM
60.H8Q02.001
LOWER CASE ASSY - RED
60.H8W02.001
RIGHT IO COVER
42.H8Q02.001
LEFT IO COVER UP
42.H8Q02.002
LEFT IO COVER DOWN
42.H8Q02.003
ASSY LCD TOUCH MODULE 10.1 INCL.
CONTROL BOARD & LVDS CABLE
6M.H8Q02.001
LCD ASSEMBLY
DIGITAL LIGHT DEVICE
CAMERA 2M
57.H8Q02.001
OT_HH • Acer A200 Mainboard 8G eMMC
A200_8ti, A200_8r Nvidia Tegra 250
MB.H8P00.001
OT_HH • Acer A200 Mainboard 16G eMMC
A200_16ti, A200_16r Nvidia Tegra 250
MB.H8Q00.001
MIC
23.H8Q02.001
SPEAKER L+R
23.H8Q02.002
MAINBOARD
SPEAKER
FRU (Field Replaceable Unit) List
6-6
CATEGORY
Description
Part No.
MISCELLANEOUS
2M CAMERA SPONGE
47.H8Q02.001
Screw List
CATEGORY
Description
Part No.
SCREWS
SCREW 2.0D 3.0L K 3.6D ZK NL CR3
86.H8Q02.001
SCREW 2D 4.0L K 4.0D NI NL 0.3T
86.H8Q02.002
FRU (Field Replaceable Unit) List
6-7
CHAPTER 7
Model Definition and Configuration
Model Definition and Configuration. . . . . . . . . . . . . . . . . . . . . . . . . .7-2
ICONIA TAB A200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Model Definition and Configuration
ICONIA TAB A200
Table 7:1. RO, NS and Description
Model
Country
Part No.
RO
NS
Description
A200
AU/NZ
XE.H8PAN.001
AAP
ACA
A200 Tablet None WW_GEN1
AndroidAU-Tab-1 A200 AU- Titanium N
Wi-Fi only_8G N N
A200
AU/NZ
XE.H8XAN.003
AAP
ACA
A200 Tablet None WW_GEN1
AndroidAU-Tab-1 A200 AU- Red 16G
NNN
A200
AU/NZ
XE.H8WAN.003
AAP
ACA
A200 Tablet None WW_GEN1
AndroidAU-Tab-1 A200 AU- Red 8G N
NN
A200
AU/NZ
XE.H8QAN.003
AAP
ACA
A200 Tablet None WW_GEN1
AndroidAU-Tab-1 A200 AU- Titanium
16G N N N
A200
ACLASpanish
XE.H8XPN.005
PA
AAC
A200 Tablet WW_GEN1 AndroidLatinTab-1 USEU Red 16G N N N
A200
ACLASpanish
XE.H8QPN.004
PA
AAC
A200 Tablet WW_GEN1 AndroidLatinTab-1 USEU Titanium 16G N N N
A200
ACLASpanish
XE.H8WPN.001
PA
AAC
A200 Tablet WW_GEN1 AndroidLatinTab-1 USEU Red 8G N N N
A200
ACLASpanish
XE.H8PPN.001
PA
AAC
A200 Tablet WW_GEN1 AndroidLatinTab-1 USEU Titanium 8G N N N
A200
WW
XE.H8WWN.00
1
WW
WW
A200 Tablet None WW_GEN1
AndroidWW-sample2 EUUK Red N 8G
NN
A200
WW
XE.H8PWN.001
WW
WW
A200 Tablet None WW_GEN1
AndroidWW-sample2 EUUK Titanium
N 8G N N
A200
Mexico
XE.H8PPN.002
PA
AAC
A200 Tablet WW_GEN1
AndroidMexico-Tab-1 US- Titanium 8G
NNN
A200
Canada
XE.H8PPN.003
PA
AAC
A200 Tablet PA_CA AndroidCA-Tab-1
US- Titanium 8G N N N
A200
Argentina
XE.H8PPN.004
PA
AAC
A200 Tablet WW_GEN1 AndroidLatinTab-Argentina AN- Titanium 8G N N N
A200
USA
XE.H8PPN.005
PA
AAC
A200 Tablet PA_CUS1 AndroidUSATab-1 US- Titanium 8G N N N
7-2
Model Definition and Configuration
Table 7:1. RO, NS and Description
Model
Country
Part No.
RO
NS
Description
A200
Canada
XE.H8WPN.003
PA
AAC
A200 Tablet PA_CA AndroidCA-Tab-1
US- Red 8G N N N
A200
USA
XE.H8WPN.002
PA
AAC
A200 Tablet PA_CUS1 AndroidUSATab-1 US- Red 8G N N N
A200
Argentina
XE.H8WPN.005
PA
AAC
A200 Tablet WW_GEN1 AndroidLatinTab-Argentina AN- Red 8G N N N
A200
Mexico
XE.H8WPN.004
PA
AAC
A200 Tablet WW_GEN1
AndroidMexico-Tab-1 US- Red 8G N N
N
A200
Canada
XE.H8XPN.001
PA
AAC
A200 Tablet PA_CA AndroidCA-Tab-1
US- Red 16G N N N
A200
Mexico
XE.H8XPN.002
PA
AAC
A200 Tablet WW_GEN1
AndroidMexico-Tab-1 US- Red 16G N
NN
A200
USA
XE.H8XPN.003
PA
AAC
A200 Tablet PA_CUS1 AndroidUSATab-1 US- Red 16G N N N
A200
Argentina
XE.H8XPN.004
PA
AAC
A200 Tablet WW_GEN1 AndroidLatinTab-Argentina AN- Red 16G N N N
A200
USA
XE.H8QPN.001
PA
AAC
A200 Tablet PA_CUS1 AndroidUSATab-1 US- Titanium 16G N N N
A200
Argentina
XE.H8QPN.002
PA
AAC
A200 Tablet WW_GEN1 AndroidLatinTab-Argentina AN- Titanium 16G N N
N
A200
Mexico
XE.H8QPN.003
PA
AAC
A200 Tablet WW_GEN1
AndroidMexico-Tab-1 US- Titanium
16G N N N
A200
Canada
XE.H8QPN.005
PA
AAC
A200 Tablet PA_CA AndroidCA-Tab-1
US- Titanium 16G N N N
A200
WW
S7.H8QWN.001
WW
WW
A200 Sample None Bar-type WiFi
10.1" WXGA Titanium 16G_ti N N
AndroidWW-sample
A200
WW
S7.H8PWN.001
WW
WW
A200 Sample None Bar-type WiFi
10.1" WXGA Titanium N N
AndroidWW-sample
A200
West EU-1
XE.H8XEN.005
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidWEU_Tab_WW EUEU Red
16G N N N
A200
West EU-1
XE.H8QEN.008
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidWEU_Tab_WW EUEU
Titanium N 16G N N
Model Definition and Configuration
7-3
Table 7:1. RO, NS and Description
Model
Country
Part No.
RO
NS
Description
A200
West EU-1
XE.H8WEN.005
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidWEU_Tab_WW EUEU Red 8G
NNN
A200
West EU-1
XE.H8PEN.005
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidWEU_Tab_WW EUEU
Titanium 8G N N N
A200
Belgium
XE.H8XEN.004
EME
A
ACH
A200 Tablet None EMEA_CUS2
AndroidBE-Tab-1 EU- Red 16G N N N
A200
Belgium
XE.H8QEN.005
EME
A
ACH
A200 Tablet None EMEA_CUS2
AndroidBE-Tab-1 EU- Titanium N 16G
NN
A200
Belgium
XE.H8WEN.004
EME
A
ACH
A200 Tablet None EMEA_CUS2
AndroidBE-Tab-1 EU- Red 8G N N N
A200
Belgium
XE.H8PEN.004
EME
A
ACH
A200 Tablet None EMEA_CUS2
AndroidBE-Tab-1 EU- Titanium 8G N N
N
A200
Nordic
XE.H8QEN.009
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidNordic-Tab-A200 EU- Titanium
N 16G N N
A200
UK
XE.H8QEN.007
EME
A
AUK
A200 Tablet None EMEA_GB
AndroidGB-Tab-1 UK- Titanium N 16G
NN
A200
France
XE.H8QEN.006
EME
A
ACF
A200 Tablet None EMEA_CUS1
AndroidFR-Tab-2 EU- Titanium N 16G
NN
A200
Middle East
XE.H8QEN.004
EME
A
AME
A200 Tablet None WW_GEN1
AndroidME-Tab-2 EUUK Titanium N
16G N N
A200
Eastern
Europe
XE.H8QEN.003
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidEE-Tab-3 EU- Titanium N 16G
NN
A200
Eastern
Europe
XE.H8QEN.002
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidEE-Tab-2 EU- Titanium N 16G
NN
A200
Germany
XE.H8QEN.001
EME
A
EME
A
A200 Tablet None EMEA_DE
AndroidDE-Tab-2 EU- Titanium N 16G
NN
A200
Japan
XE.H8QAN.001
AAP
AJC
A200 Tablet None WW_GEN1
AndroidJP-Tab-A200 US- Titanium N
16G N N
7-4
Model Definition and Configuration
Table 7:1. RO, NS and Description
Model
Country
Part No.
RO
NS
Description
A200
Eastern
Europe
XE.H8XEN.006
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidEE-Tab-2 EUEU Red 16G N N
N
A200
Eastern
Europe
XE.H8WEN.006
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidEE-Tab-2 EUEU Red 8G N N N
A200
Eastern
Europe
XE.H8PEN.006
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidEE-Tab-2 EUEU Titanium 8G N
NN
A200
France
XE.H8XEN.003
EME
A
ACF
A200 Tablet None EMEA_CUS1
AndroidFR-Tab-2 EU- Red 16G N N N
A200
France
XE.H8WEN.003
EME
A
ACF
A200 Tablet None EMEA_CUS1
AndroidFR-Tab-2 EU- Red 8G N N N
A200
France
XE.H8PEN.003
EME
A
ACF
A200 Tablet None EMEA_CUS1
AndroidFR-Tab-2 EU- Titanium 8G N N
N
A200
UK
XE.H8XEN.002
EME
A
AUK
A200 Tablet None EMEA_GB
AndroidGB-Tab-1 UK- Red 16G N N N
A200
UK
XE.H8PEN.002
EME
A
AUK
A200 Tablet None EMEA_GB
AndroidGB-Tab-1 UK- Titanium 8G N
NN
A200
UK
XE.H8WEN.001
EME
A
AUK
A200 Tablet None EMEA_GB
AndroidGB-Tab-1 UK- Red 8G N N N
A200
Germany
XE.H8XEN.001
EME
A
EME
A
A200 Tablet None EMEA_DE
AndroidDE-Tab-2 EU- Red 16G N N N
EME
A
A200 Tablet None EMEA_DE
AndroidDE-Tab-2 EU- Titanium 8G N N
N
A200
Germany
XE.H8PEN.001
EME
A
A200
Germany
XE.H8WEN.002
EME
A
EME
A
A200 Tablet None EMEA_DE
AndroidDE-Tab-2 EU- Red 8G N N N
A200
Nordic
XE.H8XEN.008
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidNordic-Tab-A200 EU- Red 16G
NNN
A200
Nordic
XE.H8WEN.008
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidNordic-Tab-A200 EU- Red 8G
NNN
A200
Nordic
XE.H8PEN.009
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidNordic-Tab-A200 EU- Titanium
8G N N N
A200
Japan
XE.H8XAN.002
AAP
AJC
A200 Tablet None WW_GEN1
AndroidJP-Tab-A200 US- Red 16G N
NN
Model Definition and Configuration
7-5
Table 7:1. RO, NS and Description
Model
Country
Part No.
RO
NS
Description
A200
Japan
XE.H8WAN.002
AAP
AJC
A200 Tablet None WW_GEN1
AndroidJP-Tab-A200 US- Red 8G N N
N
A200
Japan
XE.H8PAN.002
AAP
AJC
A200 Tablet None WW_GEN1
AndroidJP-Tab-A200 US- Titanium 8G
NNN
A200
Middle East
XE.H8XEN.007
EME
A
AME
A200 Tablet None WW_GEN1
AndroidME-Tab-2 EUEU Red 16G N N
N
A200
Middle East
XE.H8WEN.007
EME
A
AME
A200 Tablet None WW_GEN1
AndroidME-Tab-2 EUEU Red 8G N N
N
A200
Middle East
XE.H8PEN.007
EME
A
AME
A200 Tablet None WW_GEN1
AndroidME-Tab-2 EUEU Titanium 8G
NNN
A200
Eastern
Europe
XE.H8XEN.009
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidEE-Tab-3 EU- Red 16G N N N
A200
Eastern
Europe
XE.H8WEN.009
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidEE-Tab-3 EU- Red 8G N N N
A200
Eastern
Europe
XE.H8PEN.008
EME
A
EME
A
A200 Tablet None WW_GEN1
AndroidEE-Tab-3 EU- Titanium 8G N N
N
A200
WW
S7.H8XWN.001
WW
WW
A200 Sample None Bar-type WiFi
10.1" WXGA Red 16G_red N N
AndroidWW-sample
A200
WW
S7.H8WWN.001
WW
WW
A200 Sample None Bar-type WiFi
10.1" WXGA Red N N AndroidWWsample
Table 7:2. BOM Name, CPU and LCD
Model
Country
Part No.
BOM Name
CPU
LCD
A200
AU/NZ
XE.H8PAN.001
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
AU/NZ
XE.H8XAN.003
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
AU/NZ
XE.H8WAN.003
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
AU/NZ
XE.H8QAN.003
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
ACLASpanish
XE.H8XPN.005
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
7-6
Model Definition and Configuration
Table 7:2. BOM Name, CPU and LCD
Model
Country
Part No.
BOM Name
CPU
LCD
A200
ACLASpanish
XE.H8QPN.004
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
ACLASpanish
XE.H8WPN.001
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
ACLASpanish
XE.H8PPN.001
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
WW
XE.H8WWN.001
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
WW
XE.H8PWN.001
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Mexico
XE.H8PPN.002
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Canada
XE.H8PPN.003
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Argentina
XE.H8PPN.004
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
USA
XE.H8PPN.005
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Canada
XE.H8WPN.003
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
USA
XE.H8WPN.002
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Argentina
XE.H8WPN.005
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Mexico
XE.H8WPN.004
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Canada
XE.H8XPN.001
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
Mexico
XE.H8XPN.002
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
USA
XE.H8XPN.003
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
Argentina
XE.H8XPN.004
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
USA
XE.H8QPN.001
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Argentina
XE.H8QPN.002
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Mexico
XE.H8QPN.003
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Canada
XE.H8QPN.005
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
WW
S7.H8QWN.001
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
WW
S7.H8PWN.001
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
West EU-1
XE.H8XEN.005
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
West EU-1
XE.H8QEN.008
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
West EU-1
XE.H8WEN.005
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
West EU-1
XE.H8PEN.005
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Belgium
XE.H8XEN.004
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
Model Definition and Configuration
7-7
Table 7:2. BOM Name, CPU and LCD
Model
Country
Part No.
BOM Name
CPU
LCD
A200
Belgium
XE.H8QEN.005
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Belgium
XE.H8WEN.004
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Belgium
XE.H8PEN.004
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Nordic
XE.H8QEN.009
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
UK
XE.H8QEN.007
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
France
XE.H8QEN.006
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Middle East
XE.H8QEN.004
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Eastern
Europe
XE.H8QEN.003
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Eastern
Europe
XE.H8QEN.002
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Germany
XE.H8QEN.001
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Japan
XE.H8QAN.001
A200_16ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Eastern
Europe
XE.H8XEN.006
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
Eastern
Europe
XE.H8WEN.006
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Eastern
Europe
XE.H8PEN.006
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
France
XE.H8XEN.003
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
France
XE.H8WEN.003
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
France
XE.H8PEN.003
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
UK
XE.H8XEN.002
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
UK
XE.H8PEN.002
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
UK
XE.H8WEN.001
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Germany
XE.H8XEN.001
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
Germany
XE.H8PEN.001
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Germany
XE.H8WEN.002
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Nordic
XE.H8XEN.008
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
Nordic
XE.H8WEN.008
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Nordic
XE.H8PEN.009
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Japan
XE.H8XAN.002
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
7-8
Model Definition and Configuration
Table 7:2. BOM Name, CPU and LCD
Model
Country
Part No.
BOM Name
CPU
LCD
A200
Japan
XE.H8WAN.002
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Japan
XE.H8PAN.002
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Middle East
XE.H8XEN.007
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
Middle East
XE.H8WEN.007
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Middle East
XE.H8PEN.007
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
Eastern
Europe
XE.H8XEN.009
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
Eastern
Europe
XE.H8WEN.009
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
A200
Eastern
Europe
XE.H8PEN.008
A200_8ti
NV-TEGRA250
H10.1WXGA w/TP
A200
WW
S7.H8XWN.001
A200_16r
NV-TEGRA250
H10.1WXGA w/TP
A200
WW
S7.H8WWN.001
A200_8r
NV-TEGRA250
H10.1WXGA w/TP
Table 7:3. Memory1, Memory2 and Memory3
Model
Country
Part No.
Memory1
Memory2
Memory3
A200
AU/NZ
XE.H8PAN.001
MDDR8GbII
eMMC8GB
N
A200
AU/NZ
XE.H8XAN.003
MDDR8GbII
N
eMMC16GB
A200
AU/NZ
XE.H8WAN.003
MDDR8GbII
eMMC8GB
N
A200
AU/NZ
XE.H8QAN.003
MDDR8GbII
N
eMMC16GB
A200
ACLASpanish
XE.H8XPN.005
MDDR8GbII
N
eMMC16GB
A200
ACLASpanish
XE.H8QPN.004
MDDR8GbII
N
eMMC16GB
A200
ACLASpanish
XE.H8WPN.001
MDDR8GbII
eMMC8GB
N
A200
ACLASpanish
XE.H8PPN.001
MDDR8GbII
eMMC8GB
N
A200
WW
XE.H8WWN.001
MDDR8GbII
eMMC8GB
N
A200
WW
XE.H8PWN.001
MDDR8GbII
eMMC8GB
N
A200
Mexico
XE.H8PPN.002
MDDR8GbII
eMMC8GB
N
A200
Canada
XE.H8PPN.003
MDDR8GbII
eMMC8GB
N
A200
Argentina
XE.H8PPN.004
MDDR8GbII
eMMC8GB
N
Model Definition and Configuration
7-9
Table 7:3. Memory1, Memory2 and Memory3
Model
Country
Part No.
Memory1
Memory2
Memory3
A200
USA
XE.H8PPN.005
MDDR8GbII
eMMC8GB
N
A200
Canada
XE.H8WPN.003
MDDR8GbII
eMMC8GB
N
A200
USA
XE.H8WPN.002
MDDR8GbII
eMMC8GB
N
A200
Argentina
XE.H8WPN.005
MDDR8GbII
eMMC8GB
N
A200
Mexico
XE.H8WPN.004
MDDR8GbII
eMMC8GB
N
A200
Canada
XE.H8XPN.001
MDDR8GbII
N
eMMC16GB
A200
Mexico
XE.H8XPN.002
MDDR8GbII
N
eMMC16GB
A200
USA
XE.H8XPN.003
MDDR8GbII
N
eMMC16GB
A200
Argentina
XE.H8XPN.004
MDDR8GbII
N
eMMC16GB
A200
USA
XE.H8QPN.001
MDDR8GbII
N
eMMC16GB
A200
Argentina
XE.H8QPN.002
MDDR8GbII
N
eMMC16GB
A200
Mexico
XE.H8QPN.003
MDDR8GbII
N
eMMC16GB
A200
Canada
XE.H8QPN.005
MDDR8GbII
N
eMMC16GB
A200
WW
S7.H8QWN.001
MDDR8GbII
N
eMMC16GB
A200
WW
S7.H8PWN.001
MDDR8GbII
eMMC8GB
N
A200
West EU-1
XE.H8XEN.005
MDDR8GbII
N
eMMC16GB
A200
West EU-1
XE.H8QEN.008
MDDR8GbII
N
eMMC16GB
A200
West EU-1
XE.H8WEN.005
MDDR8GbII
eMMC8GB
N
A200
West EU-1
XE.H8PEN.005
MDDR8GbII
eMMC8GB
N
A200
Belgium
XE.H8XEN.004
MDDR8GbII
N
eMMC16GB
A200
Belgium
XE.H8QEN.005
MDDR8GbII
N
eMMC16GB
A200
Belgium
XE.H8WEN.004
MDDR8GbII
eMMC8GB
N
A200
Belgium
XE.H8PEN.004
MDDR8GbII
eMMC8GB
N
A200
Nordic
XE.H8QEN.009
MDDR8GbII
N
eMMC16GB
A200
UK
XE.H8QEN.007
MDDR8GbII
N
eMMC16GB
A200
France
XE.H8QEN.006
MDDR8GbII
N
eMMC16GB
A200
Middle East
XE.H8QEN.004
MDDR8GbII
N
eMMC16GB
A200
Eastern
Europe
XE.H8QEN.003
MDDR8GbII
N
eMMC16GB
A200
Eastern
Europe
XE.H8QEN.002
MDDR8GbII
N
eMMC16GB
A200
Germany
XE.H8QEN.001
MDDR8GbII
N
eMMC16GB
7-10
Model Definition and Configuration
Table 7:3. Memory1, Memory2 and Memory3
Model
Country
Part No.
Memory1
Memory2
Memory3
A200
Japan
XE.H8QAN.001
MDDR8GbII
N
eMMC16GB
A200
Eastern
Europe
XE.H8XEN.006
MDDR8GbII
N
eMMC16GB
A200
Eastern
Europe
XE.H8WEN.006
MDDR8GbII
eMMC8GB
N
A200
Eastern
Europe
XE.H8PEN.006
MDDR8GbII
eMMC8GB
N
A200
France
XE.H8XEN.003
MDDR8GbII
N
eMMC16GB
A200
France
XE.H8WEN.003
MDDR8GbII
eMMC8GB
N
A200
France
XE.H8PEN.003
MDDR8GbII
eMMC8GB
N
A200
UK
XE.H8XEN.002
MDDR8GbII
N
eMMC16GB
A200
UK
XE.H8PEN.002
MDDR8GbII
eMMC8GB
N
A200
UK
XE.H8WEN.001
MDDR8GbII
eMMC8GB
N
A200
Germany
XE.H8XEN.001
MDDR8GbII
N
eMMC16GB
A200
Germany
XE.H8PEN.001
MDDR8GbII
eMMC8GB
N
A200
Germany
XE.H8WEN.002
MDDR8GbII
eMMC8GB
N
A200
Nordic
XE.H8XEN.008
MDDR8GbII
N
eMMC16GB
A200
Nordic
XE.H8WEN.008
MDDR8GbII
eMMC8GB
N
A200
Nordic
XE.H8PEN.009
MDDR8GbII
eMMC8GB
N
A200
Japan
XE.H8XAN.002
MDDR8GbII
N
eMMC16GB
A200
Japan
XE.H8WAN.002
MDDR8GbII
eMMC8GB
N
A200
Japan
XE.H8PAN.002
MDDR8GbII
eMMC8GB
N
A200
Middle East
XE.H8XEN.007
MDDR8GbII
N
eMMC16GB
A200
Middle East
XE.H8WEN.007
MDDR8GbII
eMMC8GB
N
A200
Middle East
XE.H8PEN.007
MDDR8GbII
eMMC8GB
N
A200
Eastern
Europe
XE.H8XEN.009
MDDR8GbII
N
eMMC16GB
A200
Eastern
Europe
XE.H8WEN.009
MDDR8GbII
eMMC8GB
N
A200
Eastern
Europe
XE.H8PEN.008
MDDR8GbII
eMMC8GB
N
A200
WW
S7.H8XWN.001
MDDR8GbII
N
eMMC16GB
A200
WW
S7.H8WWN.001
MDDR8GbII
eMMC8GB
N
Model Definition and Configuration
7-11
Table 7:4. Front Camera, Battery and Adapter
Model
Country
Part No.
Front Camera
Battery
Adapter
A200
AU/NZ
XE.H8PAN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
AU/NZ
XE.H8XAN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
AU/NZ
XE.H8WAN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
AU/NZ
XE.H8QAN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
ACLASpanish
XE.H8XPN.005
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
ACLASpanish
XE.H8QPN.004
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
ACLASpanish
XE.H8WPN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
ACLASpanish
XE.H8PPN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
WW
XE.H8WWN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
WW
XE.H8PWN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Mexico
XE.H8PPN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Canada
XE.H8PPN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Argentina
XE.H8PPN.004
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
USA
XE.H8PPN.005
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Canada
XE.H8WPN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
USA
XE.H8WPN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Argentina
XE.H8WPN.005
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Mexico
XE.H8WPN.004
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Canada
XE.H8XPN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
7-12
Model Definition and Configuration
Table 7:4. Front Camera, Battery and Adapter
Model
Country
Part No.
Front Camera
Battery
Adapter
A200
Mexico
XE.H8XPN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
USA
XE.H8XPN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Argentina
XE.H8XPN.004
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
USA
XE.H8QPN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Argentina
XE.H8QPN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Mexico
XE.H8QPN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Canada
XE.H8QPN.005
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
WW
S7.H8QWN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
WW
S7.H8PWN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
West EU-1
XE.H8XEN.005
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
West EU-1
XE.H8QEN.008
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
West EU-1
XE.H8WEN.005
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
West EU-1
XE.H8PEN.005
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Belgium
XE.H8XEN.004
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Belgium
XE.H8QEN.005
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Belgium
XE.H8WEN.004
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Belgium
XE.H8PEN.004
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Nordic
XE.H8QEN.009
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
UK
XE.H8QEN.007
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
Model Definition and Configuration
7-13
Table 7:4. Front Camera, Battery and Adapter
Model
Country
Part No.
Front Camera
Battery
Adapter
A200
France
XE.H8QEN.006
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Middle East
XE.H8QEN.004
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Eastern
Europe
XE.H8QEN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Eastern
Europe
XE.H8QEN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Germany
XE.H8QEN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Japan
XE.H8QAN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Eastern
Europe
XE.H8XEN.006
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Eastern
Europe
XE.H8WEN.006
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Eastern
Europe
XE.H8PEN.006
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
France
XE.H8XEN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
France
XE.H8WEN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
France
XE.H8PEN.003
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
UK
XE.H8XEN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
UK
XE.H8PEN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
UK
XE.H8WEN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Germany
XE.H8XEN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Germany
XE.H8PEN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Germany
XE.H8WEN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Nordic
XE.H8XEN.008
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
7-14
Model Definition and Configuration
Table 7:4. Front Camera, Battery and Adapter
Model
Country
Part No.
Front Camera
Battery
Adapter
A200
Nordic
XE.H8WEN.008
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Nordic
XE.H8PEN.009
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Japan
XE.H8XAN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Japan
XE.H8WAN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Japan
XE.H8PAN.002
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Middle East
XE.H8XEN.007
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Middle East
XE.H8WEN.007
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Middle East
XE.H8PEN.007
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Eastern
Europe
XE.H8XEN.009
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Eastern
Europe
XE.H8WEN.009
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
Eastern
Europe
XE.H8PEN.008
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
WW
S7.H8XWN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
A200
WW
S7.H8WWN.001
Chicony 2M FF AP2031
sensor
2CELL3.26
18W
Table 7:5. Communication, Wi-Fi Module and Color
Model
Country
Part No.
Communication
Wi-Fi Module
Color
A200
AU/NZ
XE.H8PAN.001
WiFi
AZURE AW-NH611
Titanium
A200
AU/NZ
XE.H8XAN.003
WiFi
AZURE AW-NH611
Red
A200
AU/NZ
XE.H8WAN.003
WiFi
AZURE AW-NH611
Red
A200
AU/NZ
XE.H8QAN.003
WiFi
AZURE AW-NH611
Titanium
A200
ACLASpanish
XE.H8XPN.005
WiFi
AZURE AW-NH611
Red
Model Definition and Configuration
7-15
Table 7:5. Communication, Wi-Fi Module and Color
Model
Country
Part No.
Communication
Wi-Fi Module
Color
A200
ACLASpanish
XE.H8QPN.004
WiFi
AZURE AW-NH611
Titanium
A200
ACLASpanish
XE.H8WPN.001
WiFi
AZURE AW-NH611
Red
A200
ACLASpanish
XE.H8PPN.001
WiFi
AZURE AW-NH611
Titanium
A200
WW
XE.H8WWN.001
WiFi
AZURE AW-NH611
Red
A200
WW
XE.H8PWN.001
WiFi
AZURE AW-NH611
Titanium
A200
Mexico
XE.H8PPN.002
WiFi
AZURE AW-NH611
Titanium
A200
Canada
XE.H8PPN.003
WiFi
AZURE AW-NH611
Titanium
A200
Argentina
XE.H8PPN.004
WiFi
AZURE AW-NH611
Titanium
A200
USA
XE.H8PPN.005
WiFi
AZURE AW-NH611
Titanium
A200
Canada
XE.H8WPN.003
WiFi
AZURE AW-NH611
Red
A200
USA
XE.H8WPN.002
WiFi
AZURE AW-NH611
Red
A200
Argentina
XE.H8WPN.005
WiFi
AZURE AW-NH611
Red
A200
Mexico
XE.H8WPN.004
WiFi
AZURE AW-NH611
Red
A200
Canada
XE.H8XPN.001
WiFi
AZURE AW-NH611
Red
A200
Mexico
XE.H8XPN.002
WiFi
AZURE AW-NH611
Red
A200
USA
XE.H8XPN.003
WiFi
AZURE AW-NH611
Red
A200
Argentina
XE.H8XPN.004
WiFi
AZURE AW-NH611
Red
A200
USA
XE.H8QPN.001
WiFi
AZURE AW-NH611
Titanium
A200
Argentina
XE.H8QPN.002
WiFi
AZURE AW-NH611
Titanium
A200
Mexico
XE.H8QPN.003
WiFi
AZURE AW-NH611
Titanium
A200
Canada
XE.H8QPN.005
WiFi
AZURE AW-NH611
Titanium
A200
WW
S7.H8QWN.001
WiFi
AZURE AW-NH611
Titanium
A200
WW
S7.H8PWN.001
WiFi
AZURE AW-NH611
Titanium
A200
West EU-1
XE.H8XEN.005
WiFi
AZURE AW-NH611
Red
A200
West EU-1
XE.H8QEN.008
WiFi
AZURE AW-NH611
Titanium
A200
West EU-1
XE.H8WEN.005
WiFi
AZURE AW-NH611
Red
A200
West EU-1
XE.H8PEN.005
WiFi
AZURE AW-NH611
Titanium
A200
Belgium
XE.H8XEN.004
WiFi
AZURE AW-NH611
Red
7-16
Model Definition and Configuration
Table 7:5. Communication, Wi-Fi Module and Color
Model
Country
Part No.
Communication
Wi-Fi Module
Color
A200
Belgium
XE.H8QEN.005
WiFi
AZURE AW-NH611
Titanium
A200
Belgium
XE.H8WEN.004
WiFi
AZURE AW-NH611
Red
A200
Belgium
XE.H8PEN.004
WiFi
AZURE AW-NH611
Titanium
A200
Nordic
XE.H8QEN.009
WiFi
AZURE AW-NH611
Titanium
A200
UK
XE.H8QEN.007
WiFi
AZURE AW-NH611
Titanium
A200
France
XE.H8QEN.006
WiFi
AZURE AW-NH611
Titanium
A200
Middle East
XE.H8QEN.004
WiFi
AZURE AW-NH611
Titanium
A200
Eastern
Europe
XE.H8QEN.003
WiFi
AZURE AW-NH611
Titanium
A200
Eastern
Europe
XE.H8QEN.002
WiFi
AZURE AW-NH611
Titanium
A200
Germany
XE.H8QEN.001
WiFi
AZURE AW-NH611
Titanium
A200
Japan
XE.H8QAN.001
WiFi
AZURE AW-NH611
Titanium
A200
Eastern
Europe
XE.H8XEN.006
WiFi
AZURE AW-NH611
Red
A200
Eastern
Europe
XE.H8WEN.006
WiFi
AZURE AW-NH611
Red
A200
Eastern
Europe
XE.H8PEN.006
WiFi
AZURE AW-NH611
Titanium
A200
France
XE.H8XEN.003
WiFi
AZURE AW-NH611
Red
A200
France
XE.H8WEN.003
WiFi
AZURE AW-NH611
Red
A200
France
XE.H8PEN.003
WiFi
AZURE AW-NH611
Titanium
A200
UK
XE.H8XEN.002
WiFi
AZURE AW-NH611
Red
A200
UK
XE.H8PEN.002
WiFi
AZURE AW-NH611
Titanium
A200
UK
XE.H8WEN.001
WiFi
AZURE AW-NH611
Red
A200
Germany
XE.H8XEN.001
WiFi
AZURE AW-NH611
Red
A200
Germany
XE.H8PEN.001
WiFi
AZURE AW-NH611
Titanium
A200
Germany
XE.H8WEN.002
WiFi
AZURE AW-NH611
Red
A200
Nordic
XE.H8XEN.008
WiFi
AZURE AW-NH611
Red
A200
Nordic
XE.H8WEN.008
WiFi
AZURE AW-NH611
Red
A200
Nordic
XE.H8PEN.009
WiFi
AZURE AW-NH611
Titanium
A200
Japan
XE.H8XAN.002
WiFi
AZURE AW-NH611
Red
Model Definition and Configuration
7-17
Table 7:5. Communication, Wi-Fi Module and Color
Model
Country
Part No.
Communication
Wi-Fi Module
Color
A200
Japan
XE.H8WAN.002
WiFi
AZURE AW-NH611
Red
A200
Japan
XE.H8PAN.002
WiFi
AZURE AW-NH611
Titanium
A200
Middle East
XE.H8XEN.007
WiFi
AZURE AW-NH611
Red
A200
Middle East
XE.H8WEN.007
WiFi
AZURE AW-NH611
Red
A200
Middle East
XE.H8PEN.007
WiFi
AZURE AW-NH611
Titanium
A200
Eastern
Europe
XE.H8XEN.009
WiFi
AZURE AW-NH611
Red
A200
Eastern
Europe
XE.H8WEN.009
WiFi
AZURE AW-NH611
Red
A200
Eastern
Europe
XE.H8PEN.008
WiFi
AZURE AW-NH611
Titanium
A200
WW
S7.H8XWN.001
WiFi
AZURE AW-NH611
Red
A200
WW
S7.H8WWN.001
WiFi
AZURE AW-NH611
Red
Table 7:6. Panel Size, Resolution and Form Factor
Model
Country
Part No.
Panel Size
Panel
Resolution
Form Factor
A200
AU/NZ
XE.H8PAN.001
10.1"
WXGA
Bar-type
A200
AU/NZ
XE.H8XAN.003
10.1"
WXGA
Bar-type
A200
AU/NZ
XE.H8WAN.003
10.1"
WXGA
Bar-type
A200
AU/NZ
XE.H8QAN.003
10.1"
WXGA
Bar-type
A200
ACLASpanish
XE.H8XPN.005
10.1"
WXGA
Bar-type
A200
ACLASpanish
XE.H8QPN.004
10.1"
WXGA
Bar-type
A200
ACLASpanish
XE.H8WPN.001
10.1"
WXGA
Bar-type
A200
ACLASpanish
XE.H8PPN.001
10.1"
WXGA
Bar-type
A200
WW
XE.H8WWN.001
10.1"
WXGA
Bar-type
A200
WW
XE.H8PWN.001
10.1"
WXGA
Bar-type
A200
Mexico
XE.H8PPN.002
10.1"
WXGA
Bar-type
A200
Canada
XE.H8PPN.003
10.1"
WXGA
Bar-type
7-18
Model Definition and Configuration
Table 7:6. Panel Size, Resolution and Form Factor
Model
Country
Part No.
Panel Size
Panel
Resolution
Form Factor
A200
Argentina
XE.H8PPN.004
10.1"
WXGA
Bar-type
A200
USA
XE.H8PPN.005
10.1"
WXGA
Bar-type
A200
Canada
XE.H8WPN.003
10.1"
WXGA
Bar-type
A200
USA
XE.H8WPN.002
10.1"
WXGA
Bar-type
A200
Argentina
XE.H8WPN.005
10.1"
WXGA
Bar-type
A200
Mexico
XE.H8WPN.004
10.1"
WXGA
Bar-type
A200
Canada
XE.H8XPN.001
10.1"
WXGA
Bar-type
A200
Mexico
XE.H8XPN.002
10.1"
WXGA
Bar-type
A200
USA
XE.H8XPN.003
10.1"
WXGA
Bar-type
A200
Argentina
XE.H8XPN.004
10.1"
WXGA
Bar-type
A200
USA
XE.H8QPN.001
10.1"
WXGA
Bar-type
A200
Argentina
XE.H8QPN.002
10.1"
WXGA
Bar-type
A200
Mexico
XE.H8QPN.003
10.1"
WXGA
Bar-type
A200
Canada
XE.H8QPN.005
10.1"
WXGA
Bar-type
A200
WW
S7.H8QWN.001
10.1"
WXGA
Bar-type
A200
WW
S7.H8PWN.001
10.1"
WXGA
Bar-type
A200
West EU-1
XE.H8XEN.005
10.1"
WXGA
Bar-type
A200
West EU-1
XE.H8QEN.008
10.1"
WXGA
Bar-type
A200
West EU-1
XE.H8WEN.005
10.1"
WXGA
Bar-type
A200
West EU-1
XE.H8PEN.005
10.1"
WXGA
Bar-type
A200
Belgium
XE.H8XEN.004
10.1"
WXGA
Bar-type
A200
Belgium
XE.H8QEN.005
10.1"
WXGA
Bar-type
A200
Belgium
XE.H8WEN.004
10.1"
WXGA
Bar-type
A200
Belgium
XE.H8PEN.004
10.1"
WXGA
Bar-type
A200
Nordic
XE.H8QEN.009
10.1"
WXGA
Bar-type
A200
UK
XE.H8QEN.007
10.1"
WXGA
Bar-type
A200
France
XE.H8QEN.006
10.1"
WXGA
Bar-type
A200
Middle East
XE.H8QEN.004
10.1"
WXGA
Bar-type
Model Definition and Configuration
7-19
Table 7:6. Panel Size, Resolution and Form Factor
Model
Country
Part No.
Panel Size
Panel
Resolution
Form Factor
A200
Eastern
Europe
XE.H8QEN.003
10.1"
WXGA
Bar-type
A200
Eastern
Europe
XE.H8QEN.002
10.1"
WXGA
Bar-type
A200
Germany
XE.H8QEN.001
10.1"
WXGA
Bar-type
A200
Japan
XE.H8QAN.001
10.1"
WXGA
Bar-type
A200
Eastern
Europe
XE.H8XEN.006
10.1"
WXGA
Bar-type
A200
Eastern
Europe
XE.H8WEN.006
10.1"
WXGA
Bar-type
A200
Eastern
Europe
XE.H8PEN.006
10.1"
WXGA
Bar-type
A200
France
XE.H8XEN.003
10.1"
WXGA
Bar-type
A200
France
XE.H8WEN.003
10.1"
WXGA
Bar-type
A200
France
XE.H8PEN.003
10.1"
WXGA
Bar-type
A200
UK
XE.H8XEN.002
10.1"
WXGA
Bar-type
A200
UK
XE.H8PEN.002
10.1"
WXGA
Bar-type
A200
UK
XE.H8WEN.001
10.1"
WXGA
Bar-type
A200
Germany
XE.H8XEN.001
10.1"
WXGA
Bar-type
A200
Germany
XE.H8PEN.001
10.1"
WXGA
Bar-type
A200
Germany
XE.H8WEN.002
10.1"
WXGA
Bar-type
A200
Nordic
XE.H8XEN.008
10.1"
WXGA
Bar-type
A200
Nordic
XE.H8WEN.008
10.1"
WXGA
Bar-type
A200
Nordic
XE.H8PEN.009
10.1"
WXGA
Bar-type
A200
Japan
XE.H8XAN.002
10.1"
WXGA
Bar-type
A200
Japan
XE.H8WAN.002
10.1"
WXGA
Bar-type
A200
Japan
XE.H8PAN.002
10.1"
WXGA
Bar-type
A200
Middle East
XE.H8XEN.007
10.1"
WXGA
Bar-type
A200
Middle East
XE.H8WEN.007
10.1"
WXGA
Bar-type
A200
Middle East
XE.H8PEN.007
10.1"
WXGA
Bar-type
A200
Eastern
Europe
XE.H8XEN.009
10.1"
WXGA
Bar-type
7-20
Model Definition and Configuration
Table 7:6. Panel Size, Resolution and Form Factor
Model
Country
Part No.
Panel Size
Panel
Resolution
Form Factor
A200
Eastern
Europe
XE.H8WEN.009
10.1"
WXGA
Bar-type
A200
Eastern
Europe
XE.H8PEN.008
10.1"
WXGA
Bar-type
A200
WW
S7.H8XWN.001
10.1"
WXGA
Bar-type
A200
WW
S7.H8WWN.001
10.1"
WXGA
Bar-type
Model Definition and Configuration
7-21
CHAPTER 8
Test Compatible Components
Test Compatible Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Android OS Environment Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Test Compatible Components
This computer’s compatibility is tested and verified by Acer’s internal testing department. All of its
system functions are tested under Android OS environment.
Refer to the following lists for components, adapter cards, and peripherals which have passed
these tests. Regarding configuration, combination and test procedures, please refer to the ICONIA
TAB A200. Compatibility Test Report released by the Acer Mobile System Testing Department.
Android OS Environment Test
ICONIA TAB A200
Table 8:1. ICONIA TAB A200
Vendor
Type
Description
Part No.
Mainboard
10001012
COMPAL_
Mainboard_8G
Emmc
OT_HH • Acer A200 Mainboard 8G
eMMC A200_8ti, A200_8r Nvidia
Tegra 250
MB.H8P00.001
10001012
COMPAL_
Mainboard_16G
Emmc
OT_HH • Acer A200 Mainboard 16G
eMMC A200_16ti, A200_16r Nvidia
Tegra 250
MB.H8Q00.001
60002045 HYNIX_
MDDR8GbII_
IC Hynix Memory H8TJR00X0MLR0YM 44nm_
IC.0080H.002_
60004668
ELPIDA_
MDDR8GbII_
IC Elpida Memory 168b PoP
EDB8132B2PB-6D-F 40nm 8Gb_
IC.0800E.001_
10001079
SYNNEX_
eMMC8GB_
eMMC SanDisk Memory v4.41
SDIN5C2-8G 32nm_
IC.0800B.003_
60024207
KINGSTON-FAR
EAST_
eMMC8GB_
IC Kingston Memory KE44B-26BN/
8GB 4.41_
IC.0800D.001_
60004830
SYNNEX HK_
eMMC16GB_
IC SanDisk Memory SDIN5C1-16G
TLC_
IC.0160B.003_
60035660
KINGSTON_
eMMC16GB_
IC Kingston Memory KE4BT4B6A
4.41_
IC.0160D.001_
Chicony 2M FF
AP2031 sensor_
Camera Module CHICONY 2M FF
AP2031 sensor_
QM.02M06.004_
Memory
Camera
10001044
CHICONY_
Test Compatible Components
8-2
Vendor
Type
Description
Part No.
LCD
H10.1WXGA w/
TP_
LED LCD AUO 10.1'' WXGA Glare
B101EVT03.0 00 LF 400nit 10ms
AUO ttl solution+Cando TP_
LK.10105.028_
NV-TEGRA250_
HH CPU nVidia Tegra 250 BGA 664
1GHz_
CU.25007.001_
60014287
PHIHONG_
18W_
Adapter PHIHONG 18W 12V/1.5A
Black PSA18R-120P(AI)-R LF_
AP.0180P.002_
60014287
PHIHONG_
18W_
Adapter PHIHONG 18W 12V/1.5A
1.1x3.0x7.5 Black PSA18R120P(AI)-R, w/i 150cm cable LF_
AP.0180P.003_
AZURE AWNH611_
WiFi Module AZUREWAVE 802.11n
Bluetooth FM AW-NH611 802.11bgn
single band_
QF.11N0Z.002_
2CELL3.26_
Battery SANYO BAT-1012 Polymer
2S1P SANYO 2 Cell 3260mAh Main
COMMON_
BT.00203.011_
Micro USB
cable_
Acer Micro USB cable Micro USB
cable_Picasso/VanGogh_
XZ.70200.115
60003316 AUO_
CPU
60001915
NVIDIA_
Adapter
Wi-Fi Module
PLM00016
Azurewave_
Battery
60001921
SANYO_
Accessory
10001012
COMPAL_
8-3
Test Compatible Components
CHAPTER 9
Online Support Information
Online Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Online Support Information
Introduction
This section describes online technical support services available to help users repair their Acer
Systems.
For distributors, dealers, ASP or TPM, please refer the technical queries to a local Acer branch
office. Acer Branch Offices and Regional Business Units may access our website. However some
information sources will require a user i.d. and password. These can be obtained directly from Acer
CSD Taiwan.
Acer's Website offers convenient and valuable support resources.
In the Technical Information section users can download information on all of Acer's Notebook,
Desktop and Server models including:
•
Service guides for all models
•
Bios updates
•
Software utilities
•
Spare parts lists
•
TABs (Technical Announcement Bulletin)
For these purposes, we have included an Acrobat File to facilitate the problem-free downloading of
our technical materials.
Also contained on this website are:
•
Detailed information on Acer's International Traveler's Warranty (ITW)
•
Returned material authorization procedures
•
An overview of all the support services we offer, accompanied by a list of telephone, fax
and email contacts for all your technical queries.
We are always looking for ways to optimize and improve our services, do not hesitate to direct any
suggestions or comments to us.
9-2
Online Support Information
Download PDF

advertising