Mitsubishi | CS-40309 | User manual | 2
Add to my manualsadvertisement
Contents
2-3
3-4
5-6
7-8
9-10
11
12
13-15
16-17
18-19
20-21
22-27
28-29
30-31
32-35
36-37
38-40
40-41
42-43
44
45-47
Anodes, Hull & Weld On Fittings
Swanneck, Rudder Bearings,
Tillers & Pins & Miscellaneous
Engine Mountings, Exhaust Silencers
& Flexible Hoses, Pipe Fittings
Propellers & Stern Tubes, Shaft Couplings
Damper Drive Plates & Propulsion Couplings
Electric Bow Thrusters
Consumables & Insulation
Portable & Cassette Toilets,Toilet Fluids
Antifreeze, Additives, Oils & Grease
Brass Labels, Deck Fillers & Fittings
Hatches, Portholes, Mushroom Vents,
Grills & Louvred Ventilators
Brass & Chrome Cleats, Fairleads,
Eyeplates, Hinges, Door Accessories,
Lifting Rings & General Brassware
Fenders & Cordage, Mooring Items
Anchoring Items
Galvanic Isolator, Halogen & LED Lighting,
Navigation Lights, Horns, Lamps & Spotlights
Alde Boilers & Accessories
Multifuel Stoves & Accessories
Chimneys & Accessories
Heating & Accessories
Shoreline Fridges & Freezers
Hep
2
O Plumbing Fittings
For technical enquiries call our Middlewich depot: Tel: 01606 841111 Email: [email protected]
Aquafax Limited, 14 Dencora Way, Sundon Business Park, Luton, Beds LU3 3HP Tel:(01582) 568700 Fax:(01582) 568720
Aquafax Ltd. (Hamble), 1-2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO31 4RF Tel:(023) 80457206 Fax:(023) 80457208
Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU Tel:(01752) 669944 Fax:(01752) 667764
Aquafax Ltd. (Middlewich), Unit 11, Valley Court, Sanderson Way, Middlewich, Cheshire CW10 0GF Tel:(01606) 841111 Fax:(01606) 841188
Aquafax Ltd. (Wroxham), Unit 31, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR12 8DZ Tel:(01603) 781881 Fax:(01603) 781981
Marinac Scotland (Aquafax Glasgow), 103-105 Barrie Road, Hillington Park, Glasgow G52 4PX Tel: (0141) 8827511 Fax: (0141) 8835111
CATALOGUE
J NARROWBOAT CATALOGUE 1
Magnesium Anodes
Miscellaneous Fittings
MAGNESIUM ANODES
FRESHWATER MAGNESIUM ANODES (WELD ON)
• Depth: 50mm • Total Length: 445mm
Part No. Description Weight
N-00002 Weld-on Anode 1.5kg
• Depth: 40mm • Total Length: 506mm
Part No. Description Weight
N-00004 Weld-on Anode 2.5kg
• Depth: 74mm • Total Length: 575mm
Part No. Description Weight
N-00007 Weld-on Anode 4kg
MAGNESIUM ANODES (BOLT ON)
F
OR
F
RESH
W
ATER
A
PPLICATIONS
Part No. Description Weight
N-00015 M56 Button Anode 0.28kg
N-00025 Pear Anode 0.68kg
N-00034 Hull Anode 1.0kg
N-00025
P LEASE N OTE : Magnesium anodes are lighter than their equivalent size in zinc.
Backing pads are the same size.
N-00034
N-00015
CE PLAQUE
• Solid polished cast brass
• Also available in Chrome
• Length: 140mm x Width: 100m
Material Part No.
Brass N-79180
Chrome N-79181
MISCELLANEOUS FITTINGS
BRASS GAS SPANNER
• Solid Polished Brass
• 200mm overall length
Part No. 1-59042
LONG SKIN FITTING
• Polished brass measurements in mm
G*/BSP A B D D1 F G P H Part No.
3 ⁄
4
" 142 35 46 44 21 17 22 146 N-00392
Visit our website:
www.aquafax.co.uk
2 NARROWBOAT CATALOGUE
Hull & Weld On Fittings
Brass Tiller Pins
HULL AND WELD ON FITTINGS
WELD ON STEEL HINGES
Full Strap Hinge Part No. N-00100
Thickness: 3mm
150mm
DOLLY TURNED MILD STEEL
50mm
P/No. N-00400
Plain Dolly
70mm P/No. N-00401
Dolly 1 ⁄
2
'' BSPF for vent
70mm
Two Part Hinge Part No. N-00105
100mm
Diameter: 16mm
20mm
TANK PRESSURE PLATE
Aluminium Weld-On Tank Pressure Plate.
Part No. N-00200
180mm
TANK VENTS
• Tank vent with flame trap
• All vents fit N-00401 Dolly *AF =
Across Flats
Thread Height OA Diameter Shape Finish Part No
1
1
1
⁄
⁄
2
" BSP 47mm
2
" BSP 47mm
⁄
2
" BSP 27mm
25mm AF* Hexagonal Brass 2-74508
25mm AF* Hexagonal Chrome 2-74508C
30mm Round Brass 2-74509
CAST T STUD
Part No. N-00405
180mm
T STUDS
GALVANISED T STUD
T Stud with bolt-on flange
Part No. N-00407
155mm
250mm
Over 16,000 quality products available - see our website:
www.aquafax.co.uk
BRASS TILLER PINS (S/S PIN)
B C
A
80mm
TILLER PINS
E
G
D F
H
85mm
I
J
Item Description Brass Chrome
A No.1 Design 60mm N-02450 N-02451
B No.1 Design 107mm N-02454 N-02455
C No.1 Design 135mm N-02458 N-02459
Item Description Brass
D Hedgehog N-02482
E Kingfisher N-02484
F Kingfisher with fish N-02486
Item Description Brass
G Mermaid N-02488
H Swan N-02494
Item Description Brass
I Teddy Bear N-02496
J Witch N-02498
NARROWBOAT CATALOGUE 3
4
Swannecks, Rudder Stocks
& Bearings, Tiller Bars
SWANNECKS, RUDDER BEARINGS & TILLERS
SWANNECKS
Size Part No.
40mm x 66" turned to 1 1 ⁄
4
" N-02242
275mm outer radius
175mm 155mm
31.6mm
RUDDER BEARINGS
31.6mm
159mm
1450mm
SPECIALS AVAILABLE TO ORDER
1600mm
1651mm
2mm 4mm
150mm
*+0.0mm -0.2mm tolerance
40mm Ø
710mm
Total Length: 66'' (1678mm)
Inner radius
145mm
40mm
150mm
ROUND FLANGED
RUDDER BEARINGS
• Two part bearing with 4 x 10mm hex.
m/screws
•
1 ⁄
2
" thick steel base with alloy top and nylon insert
• OA Dia.: 138mm
Dia. approx
• OA Height: 38mm approx
ID Part No. Nylon Inserts Only
1 1 ⁄
2
" N-06020 UN-06020-1
2" N-06023 UN-06023-1
40mm N-06030 UN-06030-1
50mm N-06035 UN-06035-1
STEEL RUDDER STOCK
Size Part No.
Rudder Stock 1 1 ⁄
2
" Dia x 60" long N-06000
Rudder Stock 2" Dia x 60" long N-06003
Rudder Stock Base Socket 1 1 ⁄
2
" N-06005
31mm Ø
87mm
M12 x 40mm BOLT
1524mm
38mm
SQUARE FLANGED RUDDER
STOCK BEARINGS
• With grease nipple
• 130mm square cast iron plate with 4 x 15mm
Dia. fixing holes
ID Part No.
1 1 ⁄
2
" N-06040
2" N-06043
BRASS TILLER BAR TUBE
Available in two lengths 24" or 30"
Size Brass Chrome
1 1 ⁄
4
" ID x 24" N-02402 N-02403
1 1 ⁄
2
" ID x 24" N-02404 –
1 1 ⁄
4
" ID x 30" N-02410 N-02411
1 1 ⁄
2
" ID x 30" N-02412 – OTHER SIZES TO ORDER
TILLER HANDLES
FOLDING TILLER BAR TUBE
Allows quick and easy access to deck hatches below where a fixed tiller bar may cause an obstruction.
• Polished brass
• Diameter: 31.7mm (1
1 ⁄
• Length: 838mm (33")
4
")
Part No. N-02420
NARROWBOAT CATALOGUE
A SH
S APELE
Length Diameter Wood Part No.
6 1 ⁄
2
" 1 1 ⁄
4
" Ash N-02430
6 1 ⁄
2
" 1 1 ⁄
2
" Ash N-02432
9 1 ⁄
2
" 1 1 ⁄
4
" Ash N-02435
6 1 ⁄
2
" 1 1 ⁄
4
" Sapele N-02437
9 1 ⁄
2
" 1 1 ⁄
4
" Sapele N-02440
DELIVERY
Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods.
Flexible Engine Mountings
ENGINE FITTINGS
FLEXIBLE ENGINE MOUNTINGS
• Capacity 30 - 2000 lbs per mount
• Good vibration isolation
• Fail safe design
• Will withstand roll over test
• Competitively priced
• Wide range of sizes
• Accepts propeller thrust
• Pre-loaded
• Slotted holes to assist alignment
• Height adjusting to simplify alignment
Weight on each front mount
= W x b
2 x (a+b)
Weight on each rear mount
= W x a
2 x (a+b)
H
OW TO
S
ELECT
Front mount point
W
= Weight of Engine & Gearbox
1.
Engine type, number of cylinders
Balance point
Rear mount point
I
NSTALLATION
D
ETAILS
Maximum clearance between the underside
2.
Type of gearbox and reduction ratio
Example:
Total weight of engine and gearbox
= 1200 lbs
Distance a (balance point to front mount) = 17"
Distance b (balance point to rear mount) = 14"
Front Mount
1200 x 14
2 x (17+14)
Rear Mount
1200 x 17
2 x (17+14)
3.
Weight of engine and gearbox combined by weighing or manufacturers literature
4.
Is flywheel in conventional place between the engine and gearbox?
= 270lbs per front mount
= 329lbs per rear mount of the height adjusting nut and top washer must not be more than 10mm.
If more height is required use a spacer under the mounting casting. This applies to all mountings in the R & D Marine Range.
5.
Position of engine mounting points
6.
Find centre of gravity by balancing on a roller, if possible, (see above diagram)
7.
If centre of gravity cannot be found, assume weight distribution of 60% on rear mounts, with 40% on front mounts (if rear mount is in line with the flywheel)
Shear Mounts are recommended for new installations as they give better vibration isolation.
Type of Engine Recommended mounting type
Small Compression Compression Small Shear Medium & Large Shear
2&3 Cylinder Long Stroke N-40436 N-40403/04/05
1,2&3 Cylinder Short Stroke High Speed N-40433 / N-40436 N-40409 / N-40438 / N-40439 N-40410 / N-40411
4 Cylinder N-40433 / N-40436 N-40403/04/05 Ask for Details
6 Cylinder & more N-40403/04/05 Ask for Details
COMPRESSION MOUNTING
Low height mounting with minimum deflection. 5/8 Stud.
Part No. Capacity per mount
N-40403 45-82kg (100-180lbs)
N-40404 73-168kg (160-370lbs)
N-40405 145-227kg (320-500lbs)
Mount Pre-loaded: 1.5mm (0.06")
Deflection: 2.3mm (0.09")
Height adjusting nut thickness: 14mm (0.55")
COMPRESSION MOUNTING
Competitive, low height medium capacity mount giving good engine control. 5/8 Stud.
Part No. Capacity per mount
N-40433 86kg (190lbs)
N-40436 136kg (300lbs)
Deflection: 1.65mm (0.065")
Height adjusting nut thickness: 14mm (0.55")
SMALL SHEAR LOADED MOUNTING
Low height giving good vibration isolation. 12mm Stud.
Part No. Capacity per mount
N-40438 14-41kg (30-90lbs)
N-40439 32-77kg (70-200lbs)
Mount Pre-loaded: 1.8mm (0.07")
Deflection: 1.8 - 3.4mm (0.07 - 0.14")
Height adjusting 10mm (0.39")
nut thickness:
Maximum height: 99mm (3.9")
SHEAR LOADED “SUPER MOUNTS”
Part No. Capacity per mount
N-40409 22-80kg (50-175lbs)
N-40410 36-105kg (80-230lbs)
N-40411 55-186kg (120-420lbs)
N-40412 114-255kg (250-560lbs)
Fitted with an oil shield to protect the rubber.
5/8 Stud.
Mount Pre-loaded: 2.3mm (0.09")
Deflection: 2.3 - 5.4mm (0.09 - 0.21")
Height adjusting nut thickness: 14mm (0.55")
Maximum height: 137mm (5.38")
‘X” dimensions on initial installation should not be less than 3.8mm (0.15")
NARROWBOAT CATALOGUE 5
Exhaust Silencers, Flexible
Hoses & Pipe Fittings
EXHAUST SILENCERS & FLEXIBLE HOSES
SERVAIS “HOSPITAL”
SILENCER FOR DRY EXHAUSTS
DRY EXHAUST SILENCERS
This is an excellent product to greatly reduce the exhaust noise on inboard engines operating with dry exhaust systems.
The silencer has a side 1 1 ⁄
2
" BSP(M) entry and a 1 1 ⁄
2
" BSP(M) exit on the end and can be connected using typical BSP iron fittings and our range of stainless steel braided flexible exhaust hoses (N-01012 to N-01084).
Material: Mild Steel Finish: Heat Resistant Aluminium Paint
Part No. Model Inlet/Outlet A B D
N-01000 DSA38 1 1 ⁄
2
" BSPT 381mm (15") 442mm (17 3 ⁄
8
") 114mm (4 1 ⁄
2
")
N-01001 DDA38 1 1 ⁄
2
" BSPT 559mm (22") 619mm (24 3 ⁄
8
") 114mm (4 1 ⁄
2
")
N-01005 DSA50 2" BSPT 508mm (20") 584mm (23") 152mm (6")
N-01006 DDA50 2" BSPT 760mm (30") 825mm (32 1 ⁄
2
") 152mm (6") Part No. A B
N-01008 254mm (10'') 686mm (27'')
N-01009 305mm (12'') 533mm (21'')
N-01010 305mm (12'') 813mm (32'')
FLEXIBLE EXHAUST HOSES
• S/S Single Braided • BSP Male taper thread
• Mild Steel Ends • Female as swivel nut
BSPT OA Length Dia. (approx) Male/Male Male/Female
1 1 ⁄
2
" BSP 12" (305mm) 53mm N-01012 N-01032
1 1 ⁄
2
" BSP 15" (380mm) 53mm N-01015 N-01035
1 1 ⁄
2
" BSP 18" (457mm) 53mm N-01018 N-01038
1 1 ⁄
2
" BSP 24" (610mm) 53mm N-01024 N-01044
2" BSP 12" (305mm) 63mm N-01052 N-01072
2" BSP 15" (380mm) 63mm N-01055 N-01075
2" BSP 18" (457mm) 63mm N-01058 N-01078
2" BSP 24" (610mm) 63mm N-01064 N-01084
FIRE PUTTY
Suitable for all exhaust systems, flues & boiler pipes which aids joint assembly & hardens with heat. Withstands temperatures of up to 1000ºC.
Part No. N-55900 (per 12) or
Part No. N-55900/1 (each)
MALLEABLE BLACK IRON & MILD STEEL PIPE FITTINGS
N-01125
N-01105 N-01115 N-01135
N-01145
N-01165
N-01155
N-01175
N-01185
N-01215
N-01226
6
N-01236
N-01246
Description BSP Part No.
Female Socket 1 1 ⁄
2
" N-01105
2" N-01106
45º Female Female 1 1 ⁄
2
" N-01115
Elbow 2" N-01116
45º Male Female 1 1 ⁄
2
" N-01125
Bend 2" N-01126
90º Female Female 1 1 ⁄
2
" N-01135
Elbow 2" N-01136
90º Male Female 1 1 ⁄
2
" N-01145
Elbow 2" N-01146
90º Female Female 1 1 ⁄
2
" N-01155
Swept Bend 2" N-01156
N-01255
N-01265
Description BSP Part No.
90º Male Female 1 1 ⁄
2
" N-01165
Swept Bend 2" N-01166
Female Union 1 1 ⁄
2
" N-01175
2" N-01176
Male Female 1 1 ⁄
2
" N-01185
Union 2" N-01186
Hexagon Nipple 1 1 ⁄
2
" N-01215
2" N-01216
Reducing Nipple 2"x 1 1 ⁄
2
" N-01226
Reducing Bush 2"x 1 1 ⁄
2
" N-01236
Reducing Socket 2"x 1 1 ⁄
2
" N-01246
Manufactured to EN 1562/EN 10242 & ISO5922/ISO49
Working pressure: 25 bar @ -30 to + 120ºC
20 bar @ +120 to +300ºC
Male threads taper and female parallel to ISO 7.1
N-01300G N-01317G
Description BSP Part No.
Barrel Nipple 1 1 ⁄
2
" N-01255
(Mild Steel) 2" N-01256
Female Socket 1 ⁄
4
" N-01259
(Mild Steel) 3 ⁄
8
" N-01260
1 ⁄
2
" N-01261
3 ⁄
4
" N-01262
1" N-01263
1 1 ⁄
4
" N-01264
1 1 ⁄
2
" N-01265
2" N-01266
Galvanised Plug 1 ⁄
4
" BSPT N-01300G
3 ⁄
8
" BSPT N-01301G
Galvanised Steel Cap 2 1 ⁄
2
" N-01317G
NARROWBOAT CATALOGUE
SEE SECTION 1 FOR BRASS AND
BRONZE PIPE FITTINGS
Propellers, Stern Tubes
& Accessories
PROPELLERS & STERN TUBES
PROPELLERS 3 Blade 1
1
⁄
2
" Dia. 1:12 Taper RH
Material: Manganese Bronze (HTB1)
TURBINE Traditional Heavy Design EQUIPOSE Lighter Design
PROPELLER SHAFTS
Part No. Description
N-25024 S/S 1 1 ⁄
2
" dia x 24"(610mm)
N-25026 S/S 1 1 ⁄
2
" dia x 26" (660mm)
N-25028 S/S 1 1 ⁄
2
" dia x 28" (711mm)
N-25030 S/S 1 1 ⁄
2
" dia x 30" (762mm)
N-25036 S/S 1 1 ⁄
2
" dia x 36" (914mm)
N-25000 Propeller Shaft Kit (nut, split pin & key)
N-25002-2P Split Pin Only 3 ⁄
16
'' x 2''
(All propeller shafts include nut, split pin and key)
OTHER SHAFT SIZES & LENGTHS AVAILABLE TO ORDER
Size Turbine Part No.
15" x 9" N-351509
15" x 11" N-351511
16" x 11" N-351611
16" x 12" N-351612
17" x 10" N-351710
17" x 11" N-351711
17" x 12" N-351712
17" x 14" N-351714
18" x 10" N-351810
18" x 12" N-351812
18" x 13" N-351813
19" x 11" N-351911
19" x 12" N-351912
19" x 14" N-351914
Size Equipose Part No.
16" x 10" N-351610B
16" x 12" N-351612M
17" x 10" N-351710M
17" x 11" N-351711M
17" x 12" N-351712M
17" x 13" N-351713M
18" x 12" N-351812M
19" x 13" N-351913M
19" x 14" N-351914B
19" x 15" N-351915M
20" x 15" N-352015M
OTHER PROPELLERS
AVAILABLE TO ORDER
Part No.
2-74905 Greaser
2-74910P Kit (See Section 2 for fittings)
(if LH required add ‘L’ to part no. - e.g. N-351409L)
QUICK RELEASE BRASS GREASER
Brass lubricator for stern tubes, rudder bearings etc. Bulkhead or floor mounted.
Capacity: 150ml (5fl oz.).
Dimensions: 2-74905
Base width: 80mm (3 1 ⁄
8
")
Projection: 70mm (2 3 ⁄
4
")
Base height: 27mm (1")
Outlet at base front: 1 ⁄
8
" BSP threaded
OA height extended: 288mm
OA height closed: 178mm
STERN TUBES
Bronze Weld-in Type W2 Pattern
Shaft Length A B Part No.
1 1 ⁄
2
" 7" 72mm 299mm N-08107
1 1 ⁄
2
" 10" 300mm 374mm N-08110
OTHER SIZES AVAILABLE TO ORDER
S
PARES
Description
1 1 ⁄
2
'' x 7'' centre tube for N-08107
Part No.
UN-08107-1
1 1 ⁄
2
'' Stuffing Box for N-08107 & N-08110 UN-08107-2
1 1 ⁄
2
'' x 10'' centre tube for N-08110 UN-08110-1
STERN TUBES - WELD-IN STERN TUBE FOR PSS SHAFT SEAL
Complete unit with PSS Shaft Seal & Cutlass Bearing.
Part No. Shaft A
103mm
110mm 50mm
N-08158 1 1 ⁄
4
" 190mm
N-08159 1 1 ⁄
2
" 232mm
Seal fits over 63mm OD end
5mm
Weld-in stern tube fitting
Part No. UN-08159
110mm A
SEE SECTION 2, PAGES 30 & 31
FOR OTHER SHAFT SEALS
NARROWBOAT CATALOGUE 7
Flexible Shaft &
Split Half Couplings
ENGINE FITTINGS
FLEXIBLE SHAFT COUPLINGS
Contoured flexible disc moulded in tough Polyester Elastomer. Gives clearance for bolt heads, and is able to flex freely to take up any temporary misalignment of the engine and shaft, due to flexing of the boat structure or the engine moving on its rubber vibration isolation mountings.
• For engines 5 to 1500 HP
• Reduces engine noise and vibration transmission
• Fail safe design
• Bolts between existing shaft flanges
• Requires no machining
• Simple to install
• Simple to periodically check alignment
• Accepts propeller thrust
• Impervious to salt water, diesel and lubrication oils
• Electrical continuity available
Example:
1. Ford 150 HP at 2500 RPM
2. Borg Warner Velvet Drive 72C 2:1 Reduction
3. 5" Flange, 2.500 dia Register, 4.250 PCD, 4 off holes
0.437 diameter
H
OW TO
S
ELECT
To calculate Power of coupling required.
1.
Engine horse power and Engine
Speed
Horse power of engine x reduction ratio x 100 = HP/100rpm
Engine Speed
2.
Gearbox type and reduction ratio
3.
Gearbox flange details. Diameter
150 x 2 x 100 = 12HP/100rpm
2500 of flange. Diameter of register.
Pitch circle diameter of fixing holes.
Coupling required 910-009 Borg Warner
Size and quantity of holes. (Pitch circle diameter is the distance between the centre of hole at 12 o’clock position to the centre of the hole at 6 o’clock)
Gear Box Flange Bolts & Hole Type HP Capacity / 100rpm Part No.
4" 4 x 10mm B/W, PRM, ZF-Hurth, Technodrive 5 N-40301
4" 4 x 10mm Yanmar 3 N-40302
5.75" 6 x 12.7mm B/W, PRM, ZF-Hurth, Twin Disc 20 N-40303
5.75" 6 x 16mm Twin Disc, ZF-Hurth 20 N-40306
5" 4 x 11.2mm B/W, PRM, ZF-Hurth, Volvo 13 N-40309
3.54" 4 x 8.1mm Bukh 3 N-40313
4" 4 x 10mm B/W, PRM, ZF-Hurth, Technodrive 3 N-40314
5'' 4 x 11.2mm B/W, ZF-Hurth, Volvo 20 N-40329
4.75" 6 x 11.2mm Lister 10 N-40352
A WIDER RANGE AVAILABLE ON REQUEST TOGETHER WITH FULL TECHNICAL SPECIFICATION
SPLIT HALF COUPLINGS
Made in steel and supplied with shaft clamp bolts and nuts.
• Clamps to give a better fit than a solid coupling
• Able to accommodate normal shaft tolerances
• Available in standard sizes
(both metric and imperial)
• Easy to install and position
Bobbins available to extend shaft plus gearbox flange to coupling adaptions
a
SPLIT COUPLINGS FOR IMPERIAL SHAFTS
Gearbox Bore Part No.
4" BW, PRM, ZF-Hurth 1" N-40202
4" BW, PRM, ZF-Hurth 1 1 ⁄
4
" N-40203
4" BW, PRM, ZF-Hurth 1 1 ⁄
2
" N-40204
4" Yanmar 3 ⁄
4
" N-40206
4" Yanmar 1" N-40208
4" Yanmar 1 1 ⁄
4
" N-40209
5" BW, PRM, ZF-Hurth 1" N-40220*
5" BW, PRM, ZF-Hurth 1 1 ⁄
4
" N-40221*
5" BW, PRM, ZF-Hurth 1 1 ⁄
2
" N-40222*
5" BW, PRM, ZF-Hurth 2" N-40223*
e g c
&
d b f
Gearbox Dia. Hole Pitch No. of Hole Size Register Length Boss
(a) Circle (b) Holes (c) (d) Dia. (e) Dia. (f) (g)
BW, PRM, ZF-Hurth 4" 3.25" 4 10mm 2.50" M 3.19" 3.38"
Yanmar 4" 78mm 4 10mm 50mm M 3.19" 3.38"
Volvo 4" 80mm 4 10mm 60mm F 3.28" 3.38"
BW, PRM, ZF-Hurth 5" 4.25" 4 .44" 2.50" M 3.75" 4.06"
OTHER SIZES AVAILABLE. *BORED & KEYED
PILOT DRILLED HALF COUPLING ONLY AVAILABLE ON REQUEST
SPLIT COUPLINGS FOR METRIC SHAFTS
Gearbox Bore Part No.
4" BW, PRM, ZF-Hurth 22mm N-40250
4" BW, PRM, ZF-Hurth 25mm N-40251
4" BW, PRM, ZF-Hurth 30mm N-40252
4" BW, PRM, ZF-Hurth 35mm N-40253
4" Yanmar 25mm N-40256
4" Volvo 30mm N-40262
5" BW, PRM, ZF-Hurth 30mm N-40265*
8 NARROWBOAT CATALOGUE
Damper Drive Plates
• For engines up to 800 HP
• Torque range 60-1400 lb ft
• Reduces gear noise
• Allows engine to run at lower speeds
• Fail safe design - maintains the drive if the flexible element fails
• Machined ready to install - quick and easy to fit
• Elements suitable for every application
• Element has good heat qualities
• Special back plates up to 533mm (21.0") diameter
• The flexible polyester element is impervious to salt water, diesel and lubrication oils
• Wide range of stock
• Competitively priced
• No springs to rust or fret
• Worldwide availability
DAMPER DRIVE PLATES
DAMPER DRIVE PLATES
Aquafax stocks a small selection of popular models but can obtain others from the extensive range made by R&D on request. To select the model you require ask Aquafax for the Damper Selection Procedure Leaflet or advise us of the details as outlined below.
E
LEMENT
S
ELECTION
Consider the following criteria when making a decision on the element design.
L
OOP
T
YPE
General purpose robust element which can be mounted either way round on the flywheel and can rotate in either direction. Linear stiffness up to 3 degrees of deflection.
H
AMMER
H
EAD
More torsionally flexible than the loop type, usually has smaller diameter element than our other designs but still retains the ability to be mounted either way round on the flywheel and rotate in either direction. Three stage stiffness with up to 9 degrees of deflection.
H
IGH
D
EFLECTION
(H/D) Softer than our other designs with a maximum deflection up to 30 degrees, slightly larger diameter element than other designs and can only be fitted to rotate in the standard direction of rotation (anti-clockwise looking at the flywheel). With the element facing the gearbox.
Suitable for work boats with slow speed applications and pleasure boats.
D
ETAILS REQUIRED FOR
D
AMPER
S
ELECTION
1. Manufacturer of Engine, Engine Horse Power, Engine Speed, Number of cylinders
2. Manufacturer of Gearbox, Model Number and Input Spline Details.
3. Back plate diameter, Number of holes, Size of holes, Pitch circle diameter of holes.
Does the plate fit on the face of the flywheel or locate in a register?
4. Will the element of the Drive Plate fit on the outside of the flywheel or be reversed and fit inside a flywheel recess?
5. Type of application. Pleasure or Work Boat? Does it spend long periods at low engine speeds • If an existing installation with a failed part
6. Type and Part Number of Damper that has failed
7. What has failed. Spline or Element/Springs?
Part No.
Gearbox Element/Rotation O/A Dia Flywheel Fixing Hole Size Engine e.g.
N-RD12AA37 PRM DELTA
N-RD12AA4 PRM DELTA
N-RD13AA8 PRM 101/160/260
N-RD13B8 PRM 101/160/260
N-RD14G2 PRM 101/160/260
H/D ANTI-CLOCKWISE 266.7mm
Multi 4 sets of 6/12 8mm Ford/Mitsubishi
H/D ANTI-CLOCKWISE 155.45mm
5 on 142 pcd
H/D ANTI-CLOCKWISE 298.5mm
Multi 4 sets of 6/12
LOOP EITHER
LOOP EITHER
298.5mm
Multi 4 sets of 6
6mm
8mm
BMC/Beta
BMC
8mm BMC/Lister
362mm Multi 11 sets of 6/12 8mm Ford 2700
N-RD18M2 PRM 301/401/500
N-RD22AA8 PRM 150/HURTH
N-RD22AA91 PRM 150/HURTH
N-RD22B4 PRM 150/HURTH
N-RD4P2
LOOP EITHER 362mm Multi 11 sets of 6/12 8mm Ford 2700
H/D ANTI-CLOCKWISE 298.5mm
Multi 4 sets of 6/12 8mm BMC
H/D ANTI-CLOCKWISE 314.3mm
Multi 5 sets of 6/8
LOOP EITHER 155.45mm
5 on 142 pcd
8mm
6mm
Isuzu
Various
N-RD22B60 PRM 150/HURTH
N-RD2B8
LOOP EITHER
BORG WARNER/TECHNODRIVE/TWIN DISC LOOP EITHER
N-RD3M3 BORG WARNER, HURTH 250/360
N-RD45AC8 PRM 101/160/260
LOOP EITHER
215.9mm
298.5mm
6 on 200 pcd
Multi 4 sets of 6
336.5mm
Multi 10 sets of 6
H/D ANTI-CLOCKWISE 298.5mm
Multi 4 sets of 6
BORG WARNER/TECHNODRIVE/TWIN DISC LOOP EITHER
8mm
8mm
8mm
8mm
Beta
BMC/Lister
Various
BMC
362mm Multi 11 sets of 6/12 8mm Various
NARROWBOAT CATALOGUE 9
Centaflex Marine
Propulsion Couplings
ENGINE FITTINGS
CENTAFLEX MARINE PROPULSION COUPLINGS
• Eliminate shaft-transmitted noise and vibration
• Cushion torsional stress and shock loads
• Accommodate shaft misalignment and movements
M SERIES
• Interrupts shaft-transmitted noise & vibration between engine/transmission & the boat’s hull no metal-to-metal contact.
• Angular misalignment capacity up to 2° & torsional flexibility up to 15°.
• The large volume, highly elastic, encased element absorbs torsional shocks and stress without excessive deformation.
• Design allows the transfer of propeller thrust to the gearbox thrust bearing.
• Torque capacities 175Nm - 500Nm
• Suitable for 10HP to 100HP at 1500rpm
Power & Main Dimensions
Coupling Model Nominal HP/100rpm Standard d D L Max allowable
& Size at propeller shaft Flange (max) angular misalignment
Pleasure Commercial at 1500rpm
CF-M-127 3.50 2.45 1.0 (4") 35 153 98 2º
CF-M-160 7.00 4.90 1.0 (4" & 5") 40 199 131.5 2º
Part No. Centaflex M127
N-40000 4" Flange 3 ⁄
4
" Shaft
N-40002 4" Flange 1" Shaft
N-40004 4" Flange 1 1 ⁄
4
" Shaft
N-40007 4" Flange 25mm Shaft
N-40008 4" Flange 30mm Shaft
Part No. Centaflex M160
N-40033 4" & 5" Flange 1 1 ⁄
2
" Shaft
N-40036 4" & 5" Flange 30mm Shaft
ALL COUPLINGS HAVE FAILSAFE
OTHER COUPLINGS AVAILABLE TO ORDER - CONTACT YOU LOCAL AQUAFAX DEPOT FOR DETAILS
Transmission Configurations
Drive Series Torque Capacity HP @ 1500RPM
Standard M 175Nm - 500Nm 10-100
Long Shaft AGM* 110Nm - 1500Nm 10-3000
* Full specification available on request
OTHER CONFIGURATIONS AVAILABLE TO ORDER
Standard Drive with Centaflex M or AM Coupling
Long Shaft Drive using Centaflex AGM Coupling with half-mounted thrust bearing
Short Shaft Drive using Centaflex ADM Coupling
Stern Drive (Z-Drive) using Centaflex AG Coupling
Jet Drive using Centaflex AG Coupling without reduction
10 NARROWBOAT CATALOGUE
Electric Thrusters
& Accessories
ELECTRIC BOW THRUSTERS
TT ELECTRIC THRUSTERS
• Range from 2.0kW (3HP) to 15kW (20HP)
• No reservoir to install, no leaks & no maintenance
• High performance 5-blade propellers give equal thrust in both directions
• High integrity seal
• Spline-driven propeller, no drive pin required
• Black box electronics prevent misuse and protect motor
• Hardened and ground spiral bevel gears for maximum efficiency and quiet power transmission
• Self-resetting thermal protection on all motors
• Choice of Joystick or Touch Panel controls
• Easy plug-together switch connections
• Minimum silhouette hub for smooth water flow
• Ignition Protected cable option available
CONTROL PANELS
Lewmar’s attractive panels are easy to install using a hole saw and a simple control cable connection system.
Note: Only L589094 can be used with 140TT.
L589095
L589002 & L589001
J
OYSTICK
P
ANEL
Lewmar’s Joystick Panel features a one second press-and-hold safety ON device, auto shutoff after 3 minutes of continuous use and also after 15 minutes of continuous inactivity. To prevent damage to electric motor, the panel has a one second delay from Port to Starboard (and Starboard to Port). Part No. L589002
T
OUCH
P
ANEL
The Touchscreen Panel incorporate safety locks, illumination as well as features described in the Joystick panel 589002. Part No. L589001
J
OYSTICK
C
ONTROLLER
For when automatic system shutdown is not required. Part No. L589095
185TT
185TT
250TT
250TT
TT T
HRUSTER
S
PECIFICATIONS All with single 5 blade propellers except L592501 which has twin counter rotating blades.
Part No. Model Voltage Power Gearbox Tunnel Required Thrust Weight A B C D
Kw HP Metal Fuse Kgf lb kg lb mm in mm in mm in mm in
L591801 185TT3.0 12V 3.0 4.0 Bronze 185 250A 58 128 20 43 130 5 1 ⁄
8
271 10 11 ⁄
16
185 7 5 ⁄
16
85 3 3 ⁄
8
L591802 185TT3.0 24V 3.0 4.0 Bronze 185 130A 58 128 20 43 130 5 1 ⁄
8
271 10 11 ⁄
16
185 7 5 ⁄
16
85 3 3 ⁄
8
L591807 185TT4.0 12V 4.0 5.4 Bronze 185 400A 65 143 20 43 148 5 13 ⁄
16
294 11 9 ⁄
16
185 7 5 ⁄
16
85 3 3 ⁄
8
L591808 185TT4.0 24V 4.0 5.4 Bronze 185 130A 65 143 20 43 148 5 13 ⁄
16
294 11 9 ⁄
16
185 7 5 ⁄
16
85 3 3 ⁄
8
L591803 185TT5.0 12V 5.0 6.7 Bronze 185 400A 82 180 27 59 162 6 3 ⁄
8
316 12 7 ⁄
16
185 7 5 ⁄
16
85 3 3 ⁄
8
L591804 185TT5.0 24V 5.0 6.7 Bronze 185 130A 82 180 27 59 162 6 3 ⁄
8
316 12 7 ⁄
16
185 7 5 ⁄
16
85 3 3 ⁄
8
L591805 185TT6.0 12V 6.0 8.0 Bronze 185 500A 97 213 27 59 173 6 13 ⁄
16
316 12 7 ⁄
16
185 7 5 ⁄
16
85 3 3 ⁄
8
L591806 185TT6.0 24V 6.0 8.0 Bronze 185 325A 97 213 27 59 173 6 13 ⁄
16
316 12 7 ⁄
16
185 7 5 ⁄
16
85 3 3 ⁄
8
L592501 250TT8.0 24V 8.0 10.8 Bronze 250 400A 140 308 46 102 165 6 1 ⁄
2
405 15 15 ⁄
16
250 9 13 ⁄
16
238 9 3 ⁄
8
Part No.s in red = TO ORDER ONLY
See the Lewmar section for full range and accessories...
2m 185mm ID seamless steel tube with 6.3mm wall Part No. L589322
Magnesium Tube Anode Part No. 5-20001
Special prop for steel tubes available Part No. L589351S
LEWMAR THRUSTER
CONTROL CABLES
4-Wire
Cable Length
L589017 10m
L589018 14m
L589019 18m
L589020 22m
L589015 2m Extension
T
HRUSTER
S
ELECTION
G
UIDE (Consider boat weight and types of use when choosing)
Ft
Narrowboat
Widebeam
30
3kW 58kgf
6kW 97kgf
40
4kW 65kgf
50
5kW 82kgf
8kW 140kgf
60
6kW 97kgf
70
FOR HYDRAULIC THRUSTERS SEE OUR
LEWMAR CATALOGUE
NARROWBOAT CATALOGUE 11
12
Consumables &
Engine Room Products
CONSUMABLES & ENGINE ROOM
MORRIS UNIVERSAL ANTI-FREEZE
A
PPLICATION
:
Recommended for all year round use, Universal Antifreeze protects all water cooled engines from frost damage down to -34ºC and ice damage -50ºC (at 50% of total coolant).
P
ERFORMANCE
:
• Protects against corrosion and prolongs life of metals found in engine cooling system including cast iron, aluminium, copper alloys, solder and other metals
• Does not form sediment, precipitate additives or form gels that can prematurely block the cooling system
• Does not affect rubber hoses or gasket materials
• Lasts two years in service when solution is maintained at 50%
• Does not form harmful foam inside cooling system
• Does not contain silicates
Description Part No.
Bulk pack of 12 x 1Lt bottles 2-74970
Single 1Lt bottle 2-74970/1
Bulk pack of 4 x 5Lt bottles 2-74972
Single 5Lt container 2-74972/1
Physical Characteristics
Colour: Blue
Type: Ethylene Glycol
Meets Standard: BS6580:1992
Solution Freezing Boiling SG
Vol Point Point Reading
25% -12ºC 103ºC 1.039
33% -20ºC 104.5ºC 1.057
CLOSED CELL FOAM TAPE
Grey expanded polyethylene with self adhesive waterproof backing. Density: 33kgm 3 .
Closed Cell Foam Tape can be used to form a weather tight seal when installing windows, portholes, deck hatches, ventilators etc. The rolls come with adhesive on one side to enable the foam to be positioned and held in place to make installation easy.
Available in boxes or per single coil.
For single coils add /1 to the part number i.e 5-77502/1
* Black medium density (200kgm 3 ) reverse wound PVC self adhesive foam strip
• Self adhesive on one side
• Available in 12, 19, 25 & 50mm wide rolls
• Easy and clean to use
• Anthracite colour
Part No. Qty Width Thickness Length Uses
5-77502 25 Coils 12mm ( 1 ⁄
2
") 3mm 15m Sealing Fittings, Windows,
5-77509 15 Coils 19mm ( 3 ⁄
4
") 3mm 15m Track etc.
5-77515 12 Rolls 25mm (1") 6mm 10m Weed Hatch Rubber
5-77520 6 Rolls 50mm (2") 6mm 10m
5-77500* 1 Roll 20mm ( 3 ⁄
4
") 3mm 25m Sealing windows
GLASS FIBRE WOVEN TAPE
• Suitable for exhaust systems
• Fire proof. Temperature resistant to 550°C
• Excellent chemical resistance
• Good thermal & acoustic insulation
• Retains shape, non water absorbent
• Supplied as a 30m roll or a 5m length carded
Width Thick 30m Part No. Carded Part No.
50mm 3mm 2-03001 2-03001/5P
75mm 3mm 2-03003 2-03003/5P
GLAND PACKING
Made from quality yarn lubricated & graphited prior to plaiting. Suitable for stern glands, pumps etc. Supplied as 8M length or if possible carded.
Section 8m 0.5m Carded
Part No. Part No.
1 ⁄
4
" (6.5mm) 2-03012 2-03012P
5 ⁄
16
" (8mm) 2-03013 2-03013P
3 ⁄
8
" (10mm) 2-03014 2-03014P
1 ⁄
2
" (13mm) 2-03015 –
3 ⁄
4
" (20mm) 2-03011 –
FIRE PUTTY
Suitable for all exhaust systems, flues and boiler pipes which aids joint assembly and hardens with heat. Withstands temperatures of up to 1000ºC.
Part No. N-55900 (per 12)
Part No. N-55900/1 (each)
GASTITE INSTANT GASKET
Replaces pre-formed cork, felt, paper and asbestos gaskets in minutes, withstanding temperatures from -70ºC to 250ºC.
Silicone sealants ensure permanent flexible seal that will not crack, harden or dry out.
Part No. N-55910 (per 12) or Part No. N-55910/1 (each)
SOUNDPROOF INSULATION FOAM
Designed for boat engine rooms. The reinforced foil faced (oil and tear resistant) laminated acoustic barrier foam is basically non-combustible and meets ISO 9094 of the recreational craft directive. In fact it is to the highest rating (zero) of the fire retardant requirement of BS476 Part 6 and 7.
Approx. Dimensions Part No.
30mm thick 1m x 0.6m 2-22993
30mm thick 1m x 1.20m 2-22994
30mm thick 2m x 1.20m 2-22995
3M 1436 ALUMINIUM
FOIL JOINTING TAPE
50m x 50mm Part No. 5-01436/1
NARROWBOAT CATALOGUE
DELIVERY
Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods.
Thetford, One-Chem &
Stankem Toilet Fluids
THETFORD AQUA KEM
BLUE TOILET FLUID
A powerful toilet fluid for daily use.
This popular toilet fluid has a lovely, fresh scent and lasts four to five days with average use.
Even if Aqua Kem
Blue freezes, it will still be effective after it defrosts.
Bulk Pack: 6 x 2L bottles: Part No. N-28520
Single 2L bottle: Part No. N-28520/1
Bulk Pack: 12 x 1L bottles: Part No. N-28521
Single 1L bottle: Part No. N-28521/1
TOILET FLUIDS
THETFORD AQUA KEM
GREEN TOILET FLUID
A toilet fluid with biological action for daily use. Aqua Kem
Green biologically stimulates the breakdown of toilet waste in the waste-holding tank, acting for a maximum of three to four days with average use.
It remains fluid up to -20ºC and even if it does freeze, is still effective after defrosting.
This product is particularly suitable when emptying the waste-holding tank into septic tanks.
Bulk Pack: 6 x 1.5L bottles: Part No. N-28522
Single 1.5L bottle: Part No. N-28522/1
THETFORD AQUASOFT TOILET TISSUE 4 PACK
Thetford Toilet Paper is specially formulated for chemical toilets and is recommended for both portable and permanent sanitation systems.
• Extra soft in use, it dissolves rapidly and helps avoid clogging
• Supplied as an outer of 1 x 4 roll pack of 3 ply extra soft tissue
• 225 sheets per roll
• Ideal for camping, caravan & motorhome use
Bulk Pack: 12 x 4 pack: Part No. N-28525
Single 4 pack: Part No. N-28525/1
THETFORD AQUA RINSE
PLUS TOILET FLUID
The famous pink toilet fluid with improved formula for daily use that keeps the flush water fresh and ensures that your toilet flushes effectively. Aqua
Rinse Plus prevents deposits from forming in the bowl and promotes easier opening and closing of the toilet blade.
NEW
Bulk Pack: 6 x 1.5L bottles: Part No. N-28526
Single 1.5L bottle: Part No. N-28526/1
THETFORD SEAL LUBRICANT
A silicone seal lubricant 200ml CFC free spray bottle developed for lubricating caravan doors, cassette toilets parts, toilet seats, locks and hinges. Ideal as a awning rail lubricater.
Bulk Pack: 12 x 200ml bottles:
Part No. N-28524
Single 200ml bottle:
Part No. N-28524/1
ONE-CHEM CASSETTE TOILET FLUID
• Has a clever measuring device, which means no more wasteful overdosing
• Is concentrated, giving up to 40 doses
• Works for both flush & waste tanks
• Is environmentally friendly, bio-degradable pH neutral and formaldehyde free
• Is safe, effective and smells great
Bulk Pack: 12 x 1L bottles: Part No. 5-40200
Single 1 litre bottle: Part No. 5-40200/1
ONE-CHEM HOLDING TANK FLUID
• Is specially designed for boats, barges, motorhomes,
RV’s and more marine vessels.
• It sanitises and deodorises your holding tank for up to two weeks
• Each 25ML dose treats up to 100 litres giving an amazing 20 services per bottle
• Has a built-in water softener, ideal for hard water areas
• Is environmentally friendly, bio-degradable pH neutral and formaldehyde free
Bulk Pack: 12 x 1L bottles: Part No. 5-40201
Single 1 litre bottle: Part No. 5-40201/1
STANKEM TOILET FLUIDS
Suitable for all cassette toilets, chemical toilets and toilet system holding tanks, our toilet fluids range help to keep your holding tank clean and get rid of unwanted smells.
Description Size Usage Part No.
Green (non-toxic) concentrate toilet fluid 1 Ltr Use 75ml per 10L holding tank capacity 5-40100
Blue concentrated toilet fluid 1 Ltr Use 60ml per 20L holding tank capacity 5-40101
Perfumed toilet blue fluid 2.5 Ltr Use 60ml per 10L holding tank capacity 5-40102
Perfumed toilet blue fluid 5 Ltr Use 60ml per 10L holding tank capacity 5-40104
Loo Fresh top tank additive 1 Ltr Use 60ml per 10L holding tank capacity 5-40110
DELIVERY
Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods.
NARROWBOAT CATALOGUE 13
Thetford Portable
& Cassette Toilets
THETFORD PORTA POTTI EXCELLENCE
Thetford have introduced the Porta Potti Excellence to their portable toilet range combining a sleek and sophisticated design, with comfort and quality.
• Manual piston pump or electric flush operation
• Push button vent on waste tank reducing splashing when emptying
• Integrated rotating empty spout fitted to waste tank
• Waste tank level indicator included
• Includes waste tank and flush fluid samples
• Integrated folding toilet roll holder
Part No.
TOILETS
THETFORD PORTA POTTI QUBE
The Porta Potti Qube forms the basis of a new generation of durable portable toilets from Thetford offering better appearance, functionality and comfort.
• Manual piston pump flush operation
• Push button vent on waste tank reducing splashing when emptying
• Integrated rotating empty spout fitted to waste tank
• Waste tank level indicator included
• Includes waste tank and flush fluid samples
• Hold down kit included with
Qube 335 portable toilet
Part No.
Model
N-28639
N-28640
H x W x D Colour Waste Tank Flush
(mm) Capacity
Total
Water Tank Weight
N-28639 PP Qube 335 315 x 342 x 382 White 10 Litres
N-28640 PP Qube 365 414 x 383 x 427 White 21 Litres
10 Litres 3.3Kg
15 Litres 4.0Kg
Model
P
ORTA
P
OTTI
P
ARTS
Part No. Description
N-28600 Lipseal
N-28601 Vent Seal
N-28602 Vent Button
✔
✔
✔
✔
✔
✔
✖
✖
✔
✔
✖
✖
✔ ✔ ✔ ✖ ✖ ✖
N-28603 Water Cap ✔ ✔ ✔ ✖ ✖ ✖
N-28604 Holding Tank White ✖ ✖ ✔ ✖ ✖ ✖
N-28605 Holding Tank Grey ✖ ✖ ✔ ✖ ✖ ✖
N-28606 Dump Cap ✔ ✔ ✔ ✖ ✖ ✖
N-28607 Piston Pump Grey ✖ ✔ ✔ ✖ ✖ ✖
N-28608 Piston Pump White ✖ ✔ ✔ ✖ ✖ ✖
N-28612 Water Tank White ✖ ✖ ✖ ✔ ✖ ✖
N-28613 Water Tank Granite ✖ ✖ ✖ ✔ ✖ ✖
N-28614 Holding Tank White ✖ ✖ ✖ ✔ ✖ ✖
N-28615 Holding Tank Granite ✖ ✖ ✖ ✔ ✖ ✖
N-28660 Dump Cap White ✖ ✖ ✖ ✖ ✔ ✖
N-28661 Water Cap White ✖ ✖ ✖ ✖ ✔ ✖
N-28662 Vent Button White ✖ ✖ ✖ ✖ ✔ ✔
N-28663 Piston Pump White
N-28664 Piston Pump White
✖
✖
✖
✖
✖ ✖
✖ ✖
✔
✔
*
†
✖
✖
N-28670 Water Cap White ✖ ✖ ✖ ✖ ✖ ✔
N-28671 Water Cap Granite ✖ ✖ ✖ ✖ ✖ ✔
N-28672 Piston Pump White ✖ ✖ ✖ ✖ ✖ ✔
N-28674 Dump Cap White ✖ ✖ ✖ ✖ ✖ ✔
N-28675 Electric Pump White ✖ ✖ ✖ ✖ ✖ ✔
* Fits 335 Qube only. † Fits 365 Qube only.
* Electric uses 6 x 1.5V AA Batteries
H x W x D
(mm)
Colour Waste Tank Flush Flush Total
Capacity Water Tank Operation Weight
N-28643 PP Excellence 448 x 388 x 450 White
N-28644 PP Excellence 448 x 388 x 450 White
21 Litres
21 Litres
15 Litres
15 Litres
Piston Pump 5.3kg
Electric* 5.5kg
THETFORD C402C & C403L CASSETTE
®
TOILET
These models have a fixed toilet bowl and can be installed using either left or right models. The waste holding tank has wheels and a retractable handle to allow ease of handling. In addition, the working mechanism in the waste holding tank is removable, making the inside of the tank easy to clean and maintain, while an advanced level indicator display shows the levels in the waste holding tank and/or flush-water tank.
C-402C models that have their own flush-water tank. C-403L models that are connected to the boat's water tank.
• Optimal use of space & lightweight
• Level indicator: time to empty the waste holding tank
• Waste tank with wheels
• Removable mechanism
• Vent plunger for emptying without splashing
• High-quality plastic for a durable, user-friendly and maintenance-friendly toilet
• Automatic pressure release vent prevents build-up of gases in the waste holding tank
• In-built emptying spout: no fiddling about with loose parts
• Powerful flushing system
• 12 Volt DC operation
Part No. Model
C402/403 P
ARTS
Part No. Description
N-28631 C402 Pump
N-28632 C402/403 Holding Tank L/H Grey
N-28633 C402/403 Holding Tank R/H Grey
N-28635 C400 Fresh Up Kit
Flush Installation Net Weight
Set combines a waste-holding tank with a seat & cover and free toilet fluids.
N-28506 C402C Electric Right Hand
N-28507 C402C Electric Left Hand
N-28508 C403L Electric Right Hand
N-28509 C403L Electric Left Hand
8.1kg
8.1kg
9.1kg
9.1kg
Model
C402C
C403L
A
Dimensions (mm):
B C D E
400 258 670 458 358
Fresh Water
15
Capacities
Waste Tank
19.3L
400 258 670 458 358 – 19.3L
14 NARROWBOAT CATALOGUE
Thetford Portable
& Cassette Toilets
TOILETS
THETFORD C200CS & C200CW CASSETTE
®
TOILETS
(excluding door*)
These models are equipped with a toilet bowl that can revolve 180º on the toilet base. Downward pressure on the seat locks the toilet bowl into the desired position. They can be installed as freestanding units against any outer wall of the boat. Because you can revolve the toilet bowl before use, you experience optimal comfort without losing any space.
C-200CS: models that are connected to the boat's water tank.
C-200CW: models that have their own flush-water tank.
• Optimal use of space & lightweight
• Level indicator: time to empty the waste holding tank
• Removable mechanism
• Vent plunger for emptying without splashing
• High-quality plastic for a durable, userfriendly and maintenance-friendly toilet
• Automatic pressure release vent prevents build-up of gases in the waste holding tank
• In-built emptying spout: no fiddling about with loose parts
• Powerful flushing system
• 12 Volt DC (Electric Flush)
Part No. Model Flush Net Weight
N-28504 C200CS Electric 7.2kg
N-28505* C200CW Manual 7.6kg
N-28634
C200 P
ARTS
Part No. Description
N-28619 C200CS/CW Seat & Cover White
N-28620 C200CS Flush Switch
N-28621 C200CS/CW Holding Tank Grey
N-28622 C200CS/CW C400 Lipseal
N-28623 C200CS/CW Automatic Vent
N-28624 C200CS/CW Blade Opener
N-28625 C200CW Water Fill Door White
N-28626 C200CS/CW Measuring Cup
N-28627 C200CS/CW Tank Slide
N-28628 C200/250/260/400 electric valve
N-28634 C200 Fresh-up Kit
Dimensions (mm): Capacities
Model A B C D E F Fresh Water Waste Tank
C200CS 538 500 353 822 495 430 – 17L
C200CW 728 500 353 822* 495 430 7 17L
*Height of toilet seat open 327mm
*N-28505 excludes water fill door (N-28625) which can be ordered separately if required.
N-28504
N-28505*
TOILET SERVICE DOOR 3
Dimensions (h x w):
Overall: 385 x 335mm
Door Open: 330 x 280mm
Part No. N-28511
• Modern, streamlined appearance
• Watertight and UV resistant
• Double seal ensures optimum insulation
• Special secure push-button locks
- they can’t spring open unexpectedly or be forced open
• Easy self-installation, horizontally or vertically
• Easy step-by-step guide supplied with a template for creating the opening in the boat wall
• Suitable for walls between 23 &
39mm thick
THETFORD C263-CS BUILD IN CASSETTE TOILET
This contemporary homelike design provides simple operation and features a
180º rotating bowl allowing perfect position to suit the bathroom compartment.
The C263-CS connects to the boat water system for flushing and is also available with a ceramic easy clean bowl liner.
• Use friendly control panel with push button flush
• Connects to boat water system for powerful flush operation
• Large 17.5L volume holding tank with integrated wheels and pull out handle
• Fitted with waste holding tank level indicator
• Available with ceramic easy clean bowl liner
• 12 Volt DC operation
Waste
C263 P
ARTS
Part No. Description holding tank
N-28514 C250/260 cassette holding tank
N-28622 C200CS/CW C400 lipseal
N-28628 C200/250/260/400 electric valve
Part No.
N-28646
N-28647
Model
C263-CS
C263-CS
H x W x D (mm) Colour Waste Tank Capacity
750 x 417 x 603mm White
750 x 417 x 603mm White
17.5 Litres
17.5 Litres
Bowl Liner
Standard
Ceramic
Flush Water Outlet Total Weight
10mm ID hose
10mm ID hose
8.0Kg
17.5Kg
FOR SPARES NOT LISTED PLEASE CONTACT
YOUR LOCAL AQUAFAX SALES DEPOT
NARROWBOAT CATALOGUE 15
Fuel Conditioners,
Oils & Grease
FUEL SET FUEL CONDITIONER
FUEL SET FUEL CONDITIONER
Fuel Set TM is a complete fuel conditioner that maintains a clean fuel system, giving substantial fuel savings, better performance and significant reductions in harmful emissions in all petrol and diesel engines.
Using Fuel Set avoids manual cleaning of fuel systems, reduces maintenance costs and prolongs the life of engine parts.
Please Note: double dose on first application.
Specifications:
Composition:
Appearance:
Blend of non-toxic chemicals
Clear, green mobile liquid
Odour: Eucalyptus
Poisons schedule: Non-toxic
Pot life:
Flammability: pH:
Indefinite
Non -flammable
Neutral
Safety: Environmentally responsible
Size 20ml 250ml 500ml 1ltr
Part No. N-55950 N-55951 N-55952 N-55953
• Economical 4000:1 mix ratio
• Treats all fuels – petrol, diesel, gasoil, two stroke & heating oil
• Suitable for all engines
• Removes water from fuel systems
• Kills & removes the Diesel Bug - no more blocked filters
• Cleans injectors & jets - removes gums, waxes, resins and acids
• Removes carbon build up
• Reduces harmful exhaust emissions & black smoke
• Prolongs the life of catalytic converters
• Reduces expensive maintenance & downtime
• Restores lost fuel economy
• Improves performance
• Non-toxic, non-flammable, non-biocide, non-corrosive, biodegradable, & pH neutral
NEW
EXIT RUST RUST CONVERTER
• Safely converts all rust, right down to the base metal
• Reaches parts even sand blasting cannot reach
• Coverage 10 – 15 sq m per litre
• Reduces expensive maintenance and downtime
• Surfaces treated may be cut, welded, galvanised or chromed, painted or coated
• Non-flammable, non-caustic, safe to use
• Non-toxic & environmentally responsible
Part No. N-55960 250ml
OILS, GREASE & CONSUMABLES
WHITE SPRAY GREASE
Formulated with added PTFE to repel water, resist heat & salt, and to protect against corrosion.
Special non-drip formula, particularly suitable where longer term lubrication
& protection are required.
12 x 400ml P/No. N-55930
400ml Single P/No. N-55930/1
TETROCLEAN ENGINE
CLEANER & DEGREASER
Removes ingrained grease, oil, dirt & grime from all vehicle engines in minutes.
Unique 'water washable' formula is also suitable for removing tar spots and cleaning paint brushes and floors.
6 x 1L P/No. N-55920
1L Single P/No. N-55920/1
4 x 5L P/No. N-55921
5L Single P/No. N-55921/1
EP90 HYPOID
GEAR OIL
Suitable for most manual gearboxes
12 x 500ml Part No. N-55935
500ml Single Part No. N-55935/1
DOUBLE TT
A high quality, multi-purpose maintenance fluid suitable for home, garden & workshop.
• Penetrates - loosens rusted parts
• Lubricates - stops squeaks in free mechanisms & locks
• Protects - helps to prevent corrosion on metal surfaces
12 x 400ml Part No. N-55925
400ml Single Part No. N-55925/1
ARE YOU STARTIN’?
Eases engine start in cold weather - ideal for petrol & diesel vehicles. 400ml aerosol.
6 x 400ml Part No. N-55906
400ml Single Part No. N-55906/1
HANDY OIL
A light oil suitable for many uses - in the car, home & general DIY.
Formulated from high quality mineral oils & anti-corrosion additives, to give lubrication and added protection against rust and seizure.
12 x 125ml Part No. N-55915
125ml Single Part No. N-55915/1
See Section 2
For Fuel Filters and Sump Pumps
See Section 5
For Oil Sorbent & general boat maintenance
16 NARROWBOAT CATALOGUE
Morris Lubricants
GOLDEN FILM SAE 30 (formerly
‘Supreme 30’)
A
PPLICATION
:
• Golden film SAE 30 is an ideal choice for lightly loaded older diesel engines used in canal boats, watercraft and generators e.g Lister and Perkins
P
ERFORMANCE
:
• Recommended for use in engines where modern multigrade, high additive level oils cannot be used. Can dramatically reduce the likelihood of bore glazing.
API: CC/SD TBN, mg/KOH/g: 4.0
Description Part No.
Bulk Pack 4 x 5L plastic bottles 2-74923
Single 5L plastic bottle 2-74923/1
MORRIS LUBRICANTS
SERVOL PERFORMANCE
PLUS 15W/40
A
PPLICATION
:
• High quality mineral oil designed for use in modern petrol, diesel and turbo charged engines.
P
ERFORMANCE
:
• Provides a high level of engine cleanliness and controls the formation of high temperature lacquers and low temperature sludges
• Contains an effective dispersant to minimise oil thickening
GOLDEN FILM 10W/40
CLASSIC MARINE
ENGINE OIL
• High quality multi grade engine oil designed for petrol and diesel engines, such as in canal boats, where
SAE15W/40 may be specified to ensure lubricant flows more rapidly at low temperatures improving
Ideal for
Canal Boats component protection
• Additive level has been chosen and optimised to prevent bore glazing and bore polishing
API: CG-4/CF-4/SJ/SL TBN, mg/KOH/g: 11.0
API: CC/SF
Description Part No.
Bulk Pack 4 x 5L plastic bottles 2-74924
Single 5L plastic bottle 2-74924/1
Description Part No.
Bulk Pack 4 x 5L plastic bottles 2-74925
Single 5L plastic bottle 2-74925/1
AQUAMAX 2 STROKE OUTBOARD OIL
A
PPLICATION
:
Recommended for two stroke water cooled outboard engines using premix or oil injection, from high powered down to small cylinder auxiliary engines.
P
ERFORMANCE
:
Aqua Max 2 has been developed to meet the need for a specialised ash free outboard motor oil for today’s high powered multi cylinder two cycle engines. The formulation provides an excellent lubricating film giving an improved engine performance and reduces engine wear.
• Maximum film strength
• Freedom from ring sticking
• No plug fouling or pre-ignition
• Anti-wear, anti-scuffing protection
• Reduced smoke and clean burning characteristics
• Reduced deposit formation in ports
Physical Characteristics
Colour Blue/Purple
TBN, mg/KOH/g: 4.5
Description Part No.
Bulk Pack 12 x 1Lt 2-74934
Single 1Ltr Bottle 2-74934/1
Description Part No.
Bulk Pack 4 x 5Ltr 2-74935
Single 5Ltr Container 2-74935/1
Certified by: National Marine Manufacturers Association (NMMA):
TC-W3 TM R-94102B JASO FB
K2EP LONGLIFE GREASE
A
PPLICATION
:
The high degree of water tolerance makes K2EP ideal for boat trailer bearings, where there is a combination of immersion and high speed road work.
P
ERFORMANCE
:
K2EP is a mineral oil based, lithium complex, soap-thickened grease, containing performance additives. The additives provide extreme pressure (EP), oxidation, rust and corrosion protection, ensuring effective lubrication is achieved even under the most severe conditions. It has excellent sealing properties which help protect bearings against corrosive atmospheres and the ingress of water, dust and abrasive particles. This grease out performs conventional Lithium greases at high temperatures.
Suitable for all general industrial, automotive and any bearing requiring long life high performance
Physical Characteristics
Appearance: Red Sparkle, Tacky
NLGI: 2
Thickener: Lithium Complex
Operating Temp Range: -20ºC to +150ºC
Size Part No.
400g cartridge 2-74915
K99 WATER RESISTANT GREASE
A
PPLICATION
:
Specially designed by Morris to feed evenly around the propeller shaft in the stern tube.
P
ERFORMANCE
:
Outstanding water resistance qualities providing excellent protection of parts from corrosion and has good sealing properties.
Size Part No.
500gm Tub 2-74911
3kg Tub 2-74912
12.5kg Tub 2-74913
Physical Characteristics
Appearance: Light Brown Smooth Grease
NLGI: 2/3
Operating Temp Range: -20ºC to +110ºC
DELIVERY
Unable to send via carrier. Please contact your local Aquafax sales depot for delivery methods.
NARROWBOAT CATALOGUE 17
Engraved & Cast
Brass Labels
ENGRAVED BRASS LABELS
SHOWER PUMP
19mm
THESE
DIAGRAMS
ARE FULL SIZE
DIESEL
12mm
57mm
75mm
Engraved in brass with black painted recess screw holes pre-drilled
Label Brass Chrome
Battery Isolation Switch N-79000 N-79000C
Bilge Pump N-79001
Central Heating N-79002
Diesel N-79003* N-79003C*
Emergency Fuel Cut Off N-79004 N-79004C
Engine Stop N-79005
Fuel Cock Below N-79006 N-79006C
Gas Isolation Valve N-79007 N-79007C
Gas Valve Inside N-79008 N-79008C
Headlamp N-79009*
Horn N-79010*
On/Off (vertical) N-79011*
Label Brass
Open Hatch Before Doors N-79012
Petrol N-79013*
Pump Out N-79014*
Rinse Out N-79015*
Label Brass Chrome
Ventilator Do Not Obstruct N-79018 N-79018C
Water N-79019*
Water Pump N-79020
12 volts Only N-79021*
Shower Pump N-79016
Stern Tube Greaser N-79017
240 volts Only N-79022* N-79022C*
Mobile Phone Charger N-79023
* Indicates the smaller sized labels
CAST BRASS LABELS
All labels have polished raised lettering and screw fixed holes. Items marked † also in chrome.
CURVED NAMEPLATES OBLONG NAMEPLATES
various sizes
Dimensions (wxh): 73 x 19mm
Bilge Pump - 78 x 13mm (wxh)
Part No. N-79100
Coolant - 66 x 13mm (wxh)
Part No. N-79101
Diesel - 50 x 13mm (wxh)
Part No. N-79102
Diesel
Brass: N-79160 Chrome: N-79160C
Headlamp - 70 x 13mm (wxh)
Part No. N-79103
Horn - 52 x 13mm (wxh)
Part No. N-79104
Pump Out
Brass: N-79161 Chrome: N-79161C
Rinse Out
Brass: N-79162 Chrome: N-79162C
Pump Out - 70 x 13mm (wxh)
Part No. N-79106
Rinse Out - 77 x 13mm (wxh)
Part No. N-79107
NAMEPLATES
Dimensions (wxh): 73 x 26mm
Navigation Lights - 114 x 13mm (wxh)
Part No. N-79105
Water - 52 x 13mm (wxh)
Part No. N-79108
Water
Brass: N-79163 Chrome: N-79163C
NAMEPLATES
Dimensions (wxh): 70 x 45mm
† = also in chrome - add C at end of part no. i.e. N79130C
Engine Stop Part No. N-79120
Battery Isolation Switch
Part No. N-79130†
Fuel Cock Part No. N-79121
Caution! Hot
Part No. N-79131
Danger Hot Parts
Part No. N-79132
Ventilator Do Not Obstruct
Part No. N-79122†
Danger! Moving Parts
Part No. N-79133
Fuel Cock Below
Part No. N-79134†
NAMEPLATES
Dimensions (wxh):
113 x 45mm
Gas Isolation Valve
Part No. N-79135†
Main Gas Valve Below
Part No. N-79136
Not More Than 12...
Part No. N-79137
Stern Tube Greaser
Part No. N-79138
Danger - Avoid Asphyxiation... P/No. N-79150† Please Do Not Put Down Toilet... P/No. N-79151 Weed Hatch Turn Off... P/No. N-79152†
18 NARROWBOAT CATALOGUE
Hardware - Deck
Fillers & Fittings
DECK FILLERS & FITTINGS
DECK FILLERS
• Our budget range designed especially for Narrowboats
• Cast in brass
• Available in 1.5'' or 2''
• Finished in polished brass or chrome plated
N-72000 N-72001
N-72020
PUMP OUT DECK FITTING
• Fits 1
1 ⁄
2
" or 2" Hose • Includes 1 x 2-76802 key
• Pump Out symbol complies with ISO 4567 & BS 7162
H H1 H2 H3 D D1 D2 d P G Brass Chrome
120 6 31 44 100 51 60 30 38 1 1 ⁄
2
" 2-76800 2-76801
Spares
Plastic Pump Out/Deck Filler Key: Part No. 2-76802
Caps - Polished Brass: P/No. 12-76803 Chrome: P/No. 12-76801-2
‘O’ Ring: Part No. 12-76800-1
RINSE OUT DECK FITTING
• Cast brass deck fitting for
3 ⁄
4
" (19mm)
I.D. hose
• Cap fitted with ‘O’ ring &
5 ⁄
8 shore filler hose
• Supplied with name plate and key
" AF key slot
• Body is tapered inside to grip
Dimensions:
Flange dia. O.A.: 76mm
O.A. Length: 81mm
Legend Brass Chrome
Rinse Out 2-76805 2-76806
N-72010
Brass Chrome Legend Hose size
N-72000 N-72001 Diesel 52mm (2")
N-72010 N-72011 Diesel 38mm (1 1 ⁄
2
")
N-72020 N-72012 Water 38mm (1 1 ⁄
2
")
Spare Caps
N-72007 N-72008 Diesel 52mm (2")
N-72017 N-72018 Diesel 38mm (1 1 ⁄
2
")
N-72027 N-72028 Water 38mm (1 1 ⁄
2
")
Spare Gaskets:
1 1 ⁄
2
" N-72019 2" N-72111
Spare Keys: (45 x 33mm L x W)
Brass N-72030 Chrome N-72031
N-72030
DECK FILLER KEYS
2-76802 Plastic Pump Out /
Deck Filler Key
N-72039 Solid Brass
DECK FILLERS
• Hot stamped brass body and cap with Neoprene ‘O’ ring seal
• Slotted cap and three c/sk holes.
P/Hose H H1 H2 D1 D G Legend Brass Chrome
38mm (1 1 ⁄
2
") 65 45 5 54 83 1 1 ⁄
2
" Diesel 2-76700 2-76705
38mm (1 1 ⁄
2
") 65 45 5 54 83 1 1 ⁄
2
" Water 2-76710 2-76715
50mm (2") 65 46 5 54 83 1 1 ⁄
2
" Diesel 2-76720 2-76725
50mm (2") 65 46 5 54 83 1 1 ⁄
2
" Water 2-76730 2-76735
Spare Caps (Plain Cap & Chain)
Polished Brass Part No. 12-76700-2 Chrome Part No. 12-76702-2
‘O’ Ring Part No. 12-76700-3
DECK FILLERS
• Hot stamped brass body and cap with Neoprene ‘O’ ring seal
• Slotted cap and three c/sk holes
• Use hose connectors to adapt deck fillers to suit different hose sizes.
G*/BSP H H1 D D1 Legend Brass Chrome
1 1 ⁄
2
" 48 5 83 54 Diesel 2-76770 2-76773
1 1 ⁄
2
" 48 5 83 54 Water 2-76772 2-76775
G* Thread: BSP ISO 228/1 (BS 2779) (DIN 259)
Spares:
Polished Brass Part No. 12-76770-2 Chrome Part No. 12-76773-2
‘O’ Ring Part No. 12-76700-3 Key Part No. 2-76776
See Section 1 for Hose, Hose Clips & Hose Connectors
See Section 2 for more Deck Fillers, Valves, Vents & Tank Gauges
See Section 3 for Plastic Pipe Fittings & Deck Fillers
See Section 9 for Plumbing
NARROWBOAT CATALOGUE 19
Brass & Chrome
Hatches & Runners
HATCHES
N-73221
N-73200
N-73251
N-73231
SQUARE HATCHES
(complete with Telefonic Stay)
Brass frame, toggle fasteners & plexiglass glass (clear or tinted).
Dimensions: Overall: 550 x 550 mm Plexiglass: 450 x 450 mm
Brass Chrome Description
N-73200 N-73201 Clear Plexiglass Hatch + Security Bars
N-73205 N-73206 Tinted Plexiglass Hatch + Security Bars
N-73202 N-73203 Clear Plexiglass Hatch + Security Handle
N-73207 N-73208 Tinted Plexiglass Hatch + Security Handle
N-73210 N-73211 Spare hinges
N-73220 N-73221 Telescopic Adjuster 220-380mm long (illustrated)
N-73230 N-73231 Skylight Opener 330mm long, sold in pairs (illustrated)
Self adhesive sealing tape 2m: Part No. N-73209
BRASS HATCH RUNNER KITS
Runner length: 72'' (1.83m)
Hatch Runner Kit - Flat Part No. N-73250
Hatch Runner Kit - Channel Part No. N-73251
N-73250
LEWMAR HATCHES
See full specification in the
Lewmar Section - designed for sea-going craft with completely leakproof anodised aluminium frame and acrylic window.
Friction levers allow partial opening between 30º and 90º or 180º for access. See accessories such as vents, screens etc.
The model illustrated is a Low Profile Size 44 - considered very suitable for Narrowboats (Part No. L39944030, OA size 512 x 512mm, Lewmar catalogue page 20).
CAST BRASS PORTHOLES + GLASS + LINER
1
To order a complete porthole:
Order the porthole frame
2
Order the type of glass required:
Plain Glass - Clear
Starred Glass - Etched Star in Centre
Obscured - Ideal for Bathrooms etc.
3 Order the spun liner
Frame ID
Frame OD
Porthole Frame + Stared Glass
THE PORTHOLE FRAMES ONLY
Part No. Porthole Frame OD Frame ID
Size mm (inches) mm (inches)
N-73100 7 1 ⁄
2
" 275mm (10 3 ⁄
4
") 185mm (7 1 ⁄
2
")
N-73101 8" 285mm (11") 200mm (7
N-73104 14" 425mm (16 3 ⁄
4
7 ⁄
8
")
N-73102 9" 315mm (12 1 ⁄
4
") 225mm (8 7 ⁄
8
")
N-73103 11" 355mm (13 3 ⁄
4
") 275mm (11")
") 350mm (13 3 ⁄
4
")
Porthole Frame + Plain Glass
THE PORTHOLE GLASS
Porthole Spun Liner
Porthole Glass OD Plain Stared Obscured
Size mm (inches) Glass Glass Glass
7 1 ⁄
2
" 200mm (8") N-73110 – N-73140
8" 215mm (8 1 ⁄
2
") N-73111 N-73121 N-73141
9" 240mm (9 1 ⁄
2
") N-73112 N-73122 N-73142
11" 290mm (11 1 ⁄
2
") N-73113 N-73123 N-73143
14" 365mm (14 1 ⁄
2
") N-73114 N-73124 N-73144
*To fit 14" Opening Port Hole
SPUN LINER
Part No.
N-73130
N-73131
N-73132
N-73133
N-73134
*N-73139
20 NARROWBOAT CATALOGUE
A
Mushroom Vents, Grills
& Louvred Ventilators
MUSHROOM VENTS, GRILLS & LOUVRED VENTILATORS
B C D E
FIXED MUSHROOM VENTS
Fixed mushroom vents with a choice of finishes.
Item Part No. Cover Base A x B x C (mm) A x B x C (ins) Free Air Space
A N-73000 Brass Brass 108 x 156 x 85 4" x 6" x 3 1 ⁄
2
" 5800 sq. mm
B N-73001 Chrome Chromed Brass 108 x 156 x 85 4" x 6" x 3 1 ⁄
2
" 5800 sq. mm
C N-73002 Gold Plated Gold Plated 108 x 156 x 85 4" x 6" x 3 1 ⁄
2
" 5800 sq. mm
D N-73003 Gold Plated Aluminium 108 x 156 x 85 4" x 6" x 3 1 ⁄
2
" 5800 sq. mm
E N-73004 Brass Aluminium 108 x 156 x 85 4" x 6" x 3 1 ⁄
2
" 5800 sq. mm
- N-73005 Chrome Aluminium 108 x 156 x 85 4" x 6" x 3 1 ⁄
2
" 5800 sq. mm
C
A
B
A = Inside Ø B = Outside Ø C = Height
INTERNAL GRILL
Brass ring with gold/silver coloured anodised aluminium grill/mesh.
OD: 140mm Grill dia.: 106mm
P/No. N-73010 Brass (Gold grill)
P/No. N-73011 Chrome (Silver grill)
P/No. N-73012 White (Silver grill)
INTERNAL GRILL
Cast brass ring with gold or silver coloured anodised aluminium grill/mesh.
OD: 140mm Grill dia.: 106mm
P/No. N-73015 Brass (Gold grill)
P/No. N-73016 Chrome (Silver Grill)
CAST BRASS GRILL
Cast brass cover.
OD: 150mm Grill dia.: 110mm
Part No. N-73020R Brass
Part No. N-73021R Chrome
LOUVRED VENTILATORS
Pressed brass, chrome plated brass or 316 polished stainless steel.
HOODED LOUVRE VENTILATORS
(Flush on the back face)
7-30006
Size Free air space Polished Chrome 316
(W x H) (sq.mm) Lacquer Plated S/Steel
6" x 3" 2090 7-30000 7-30010 7-30060
9" x 3" 2470 7-30001 7-30011 7-30061
12" x 3" 3705 7-30002 7-30012 7-30062
6" x 6" 6175 7-30004 7-30014 7-30064
9" x 6" 6650 7-30005 7-30015 7-30065
12" x 6" 9975 7-30006 7-30016 7-30066
6" x 9" 11300 7-30007 7-30017 -
7-30011
RETURN AIR GRILL
(Protrudes on the back face)
Size Free air space Polished Chrome 316
(W x H) (sq.mm) Lacquer Plated S/Steel
6" x 3" 3110 7-30020 7-30030 7-30070
6" x 4" 4665 7-30021 7-30031 –
6" x 6" 7775 7-30022 7-30032 7-30072
6" x 9" 13300 7-30027 - -
7-30004
7-30020
7-30012
MUSHROOM VENT LINER
Spun brass.
OD: 141mm Depth: 62mm
Part No. N-73050 Brass
Part No. N-73060 Chrome
7-30070
7-30070
7-30007
7-30064
7-30014
NARROWBOAT CATALOGUE 21
Toe Steps, Plank & Pole Racks,
Cleats, Fairleads, Sockets
SPRUNG TOE STEP
Brass with a S/Steel spring
Base: 105L x 45W x 20D mm
Open: 105L x 80W x 85D mm
Material Part No.
Brass N-70000
Chrome N-70001
Gold Plated N-70002
HEART
SHAPED
TOE STEP
Brass
Length: 152mm
Width: 59mm
Depth: 38mm
BRASSWARE
PLANK &
POLE RACKS
Part No. N-70005
All measurements in mm
Type (Double) Section A B C (Base x2) D E F
Lightweight 13 Ø 58 258 26 x 81 75 430 220
Lightweight Length Width Height Brass Chrome
Single (each) 90mm 80mm 70mm N-70020 N-70021
Double (pair) 430mm 80mm 75mm N-70010 N-70011
STRAIGHT FAIRLEAD
Brass. 180mm long x 30mm wide
Part No. N-70060
FENDER EYE SOCKET
Brass with S/Steel pin
Flange dia.: 90mm
Depth: 30mm Hole Size: 62mm
Material Part No.
Brass N-70040
Chrome N-70041
STRAIGHT FAIRLEAD
WITH LIP
Material Part No.
180mm long x
Brass N-70070R
30mm wide
Chrome N-70071R
Type (Double) Section A B C (Base x2) D E F
Heavyweight 17 Ø 53 274 40 x 65 77 423 228
Heavyweight Length Width Height Brass Chrome
Double (pair) 423mm 17mm 77mm N-70022 N-70023
A
B
Sheet Cleats
C Streamline Cleats
BOLT THROUGH CLEAT
Supplied c/w studs & nuts.
Length: 130mm (5" approx)
Material Part No.
Brass N-71040
Chrome N-71041
BOLT THROUGH BOLLARD
Supplied c/w studs & nuts.
Length Brass Chrome
160mm (6") N-71050 N-71051
200mm (8") N-71052 N-71053
250mm (10") N-71054 N-71055
Imperial sizes are approx.
DECK CLEATS
Type Item Brass Chrome Length
Sheet Cleat A N-71000 N-71001 50mm
Sheet Cleat - N-71002 N-71003 75mm
Sheet Cleat - N-71004 N-71005 100mm
Sheet Cleat B N-71006 N-71007 130mm
Streamline - N-71020 N-71021 125mm
Streamline C N-71022 N-71023 150mm
Streamline D N-71024 N-71025 200mm
Streamline - N-71026 N-71027 250mm
D
A
B
A B
C
CONTINENTAL FAIRLEADS
Supplied in pairs (RH & LH)
Item Brass Chrome Length
A N-71100 N-71101 110mm
- N-71102 N-71103 150mm
- N-71104 N-71105 205mm
- N-71106 – 252mm
B N-71108 N-71109 300mm*
C N-71112 N-71113 110mm
*Supplied with studs & nuts.
22 NARROWBOAT CATALOGUE
C
FLAGPOLE SOCKETS
Vertical Sockets
Item Brass Chrome Base x Pole ID
A N-71130 N-71131 65 x 22mm
B N-71132 N-71133 70 x 25mm
10 0 Incline Sockets
Item Brass Chrome Base x Pole ID
C N-71140 N-71141 46 x 16mm
D N-71142 N-71143 52 x 20mm
E N-71144 N-71145 56 x 25mm
D
E
Eye Plates, Lacing Hooks &
Eyes, Coat Hooks & Hinges
BRASSWARE
A B C D
FENDER EYE PLATES
N-71272/73 are supplied with M5 studs and nuts
SNAP SHACKLE
Brass.
75mm long x 37mm wide
Part No. N-71310
A
Single
N-76300
B
Single
N-76304R
FENDER EYE PLATE
Forged Brass.
Hole Dia. 14mm
Dimensions WxDxH: 32 x 33 x 27mm
Polished Part No. N-71240
Chrome Plated Part No. N-71241
LACING HOOK
Brass Chrome Length
N-71200R N-71201R 42mm
A
D
Foldaway Quad
Hook N-76314
B
LACING EYE
Item Brass Chrome L R T Foot Width
A N-71210 N-71211 48mm 10mm 6mm 13mm
B N-71220 N-71221 50mm 20mm 4.7mm 9mm
Item Brass Chrome Length Width
A N-71250 N-71251 37mm 37mm
B N-71260 N-71261 52mm 30mm
C N-71270 N-71271 80mm 35mm
D N-71272 N-71273 80mm 35mm
C
Foldaway
Triple Hook
N-76311
COAT HOOKS
Item Length Width Brass Chrome
A 53mm 20mm N-76300 N-76301
B 45mm 32mm N-76304R N-76305R
Base size
C 72H x 36W mm N-76310 N-76311
D 72H x 36W mm N-76314 N-76315
MAST
CLEAT
N-71231
N-71234
Brass Chrome Length Width
N-71230 N-71231 70mm 17mm
N-71234 N-71235 130mm 25mm
DOUBLE TAIL HINGES
A B
C
Item Length Width Brass Chrome
A 60mm 60mm N-76350 N-76351
B 95mm 55mm N-76360R N-76361R
C 100mm 25mm N-76370 N-76371
D 150mm 30mm N-76374 N-76375
E 60mm 32mm N-76378 N-76379
F 103mm 32mm N-76382 N-76383
E
F
D
HATCH HINGES
Size: 95L x 60W mm
Brass Chrome
N-76340 N-76341
FOLDING TABLE
HINGE
Size: 65L x 30W mm
Brass Chrome
N-76344 N-76345
A
B
LIFT OFF
HINGES
Size(mm) Right Hand Right Hand Left Hand Left Hand
Item L x H Brass Chrome Brass Chrome
A 100 x 45 N-76390 N-76391 N-76392 N-76393
B 57 x 50 N-76396 N-76397 N-76398 N-76399
For More Cabin Fittings
See Section 7 or our website:
www.aquafax.co.uk
NARROWBOAT CATALOGUE 23
Curtain Fittings, Handles,
Knobs & Catches
BRASS CURTAIN FITTINGS
CURTAIN
RINGS
per 10
A B
BRASS CURTAIN FITTINGS
C D
Brass Part No. N-70390
Satin Chrome Part No. N-70391
Item Height Hole Dia. Stop End Through Corner
Brass S/Chrome Brass S/Chrome Brass S/Chrome
A 1 1 ⁄
4
" (32mm) 3 ⁄
8
" (9mm) N-70300 N-70301 N-70302 N-70303 N-70304 N-70305
B 2" (50mm) 3 ⁄
8
" (9mm) N-70310 N-70311 N-70312 N-70313 N-70314 N-70315
C 2" (50mm) 1 ⁄
2
" (12mm) N-70320 N-70321 N-70322 N-70323 N-70324 N-70325
D 2" (50mm) 1 ⁄
2
" (12mm) N-70330 N-70331 N-70332 N-70333 N-70334 N-70335
SOLID ROD
applies to some sizes
- see table below
Rod 3 ⁄
8
" Ø Rod 1 ⁄
2
" Ø
Length Brass S/Steel Brass
24" N-70340 N-70350 N-70360
30" N-70341 N-70351 N-70361
36" N-70342 N-70352 N-70362
42" N-70343 N-70353 N-70363
48" N-70344 N-70354 N-70364
54" N-70345 N-70355 N-70365
60" N-70346 – N-70366
66" N-70347 – N-70367
72" N-70348 – N-70368
BRASS CURTAIN TUBE
3/8'' x 3m polished Part No. B-15608
BRASS HANDLES, KNOBS, & DOOR ACCESSORIES
N-75858
N-75860
RIGID PULL HANDLE
Overall Length: 100mm
Projection: 24mm
Brass Chrome
N-75858 –
Overall Length: 125mm
Projection: 22mm
Brass Chrome
N-75860 N-75861
DRAWER HANDLE
Overall Length: 75mm
Projection: 22mm
Brass Chrome
N-75870 N-75871
VICTORIAN KNOB
Part No. Size
N-75830 1" 25mm
N-75831 1 1 ⁄
4
" 32mm
N-75832 1 1 ⁄
2
" 38mm
N-75833 2" 50mm
GEORGIAN KNOB
Part No. Size
N-75840 1" 25mm
N-75841 1 1 ⁄
4
" 32mm
N-75842 1 1 ⁄
2
" 38mm
N-75843 2" 50mm
24
N-75800
POLISHED CAST BRASS
HOODED DRAWER PULLS
Length: 100mm
A
DRAWER HANDLES
N-75802
Part No. Type
N-75800 Plain
N-75802 Fluted
B
N-75801
CHROME PLATED CAST BRASS
HOODED DRAWER PULLS
Length: 100mm
N-75803
Part No. Type
N-75801 Plain
N-75803 Fluted
C
Item Brass Chrome Size L x W
A N-75880 N-75881 75 x 50 mm
B N-75882 N-75883 92 x 63 mm
C N-75886 N-75887 80 x 50 mm
CUPBOARD LEVER CATCH
Escutcheon plate 40 x 18mm (L x W).
Lever: 50mm long
Brass Chrome
N-75890 N-75891
DOOR LATCH
50BL x 16BW x 45L mm
Brass Chrome
N-75894 N-75895
NARROWBOAT CATALOGUE
DELIVERY
Unable to send via carrier. Please contact your local Aquafax sales depot for delivery methods.
Budget Brass
Cabin Fittings
BUDGET BRASS CABIN FITTINGS
BUDGET BRASS BUTT HINGES FLUSH LIFTING RINGS
• Self colour
• Brass pin and finished joints
POLISHED BRASS
CUPBOARD CATCH 2"
Dimensions Pol. Brass Chrome
1 1 ⁄
2
" (38mm) Dia 7-76000 7-76005
1 3 ⁄
4
" (44mm) Dia. 7-76001 7-76006
2" (51mm) Dia 7-76002 7-76007
2 1 ⁄
2
" (64mm) Dia. 7-76003 7-76008
2" (50mm) x 1 1 ⁄
2
" (38mm) 7-76012 -
H: 50mm x W: 35mm x D: 30mm
Brass Part No. 7-72644
Chrome Part No. 7-72645
Length x Width Open Part No.
1 1 ⁄
2
" (38mm) x 7 ⁄
8
" (22mm) 7-32040
2" (51mm) x 1 1 ⁄
8
" (28mm) 7-32042
2 1 ⁄
2
" (64mm) x 1 3 ⁄
8
" (35mm) 7-32044
3" (76mm) x 1 5 ⁄
8
" (41mm) 7-32045
BRASS BUTTON
• Machined extruded polished brass
• Dimension: 2" (50mm)
Brass Part No. 7-76039
Chrome Part No. 7-76040
JOINT STAYS
• Chrome plated brass stays
• Sold in pairs
Size (Closed) Part No.
3" (76mm) 7-76455
4" (102mm) 7-76456
BUTTON ON PLATE
• Available in polished brass or chrome plated brass
Dimensions Pol. Brass Chromed Brass
2" dia. (51mm) 7-76032 7-76035
BARREL BOLTS
• 1" (25mm)Wide
• Made from extruded brass with
5 ⁄
16
" dia. brass shoot
Size Type Pol. Brass Chrome
1 1 ⁄
2
" (38mm) Straight 7-75000 7-75010
2" (51mm) Straight 7-75001 7-75011
2 1 ⁄
2
" (64mm) Straight 7-75002 7-75012
3" (76mm) Straight 7-75003 7-75013
4" (102mm) Straight 7-75004 7-75014
6" (152mm) Straight 7-75005 7-75015
Spare Keep Straight 17-75000-2 17-75010-2
3" (76mm) Necked 7-75007 7-75017
Spare Keep Necked 17-75007-2 17-75017-2
SILENT CABIN HOOKS
• Hot pressed brass
• 2 hole oval fixing plates
7-75981
HAT AND COAT HOOKS
Simple, clean design in aluminium.
7-75980
Wardrobe
Hook
7-72492
Hat & Coat
Hook
7-72490
Size Pol. Brass Chrome
2 1 ⁄
2
" (64mm) 7-76560 7-76565
3" (76mm) 7-76561 7-76566
4" (102mm) 7-76562 7-76567
6" (152mm) - 7-76568
Spare Eye 17-76560-2 17-76565-2
7-75982
COAT HOOKS
Description Brass Chrome
Hat & Coat 7-75980 7-75990
Single Robe 7-75981 7-75991
Double Robe 7-75982 7-75992
Width Height Projection Part No.
19mm 120mm 52mm 7-72490
19mm 50mm 30mm 7-72492
CURTAIN HOOK
Fleur De Lys
Overall Height: 75mm
Projection: 25mm
Brass Chrome
7-75985 7-75995
FOR MORE CABIN FITTINGS AND
GENERAL BRASSWARE SEE SECTION 7
NARROWBOAT CATALOGUE 25
Brass & Chrome
Hardware
BRASS & CHROME HARDWARE
A
B C
A
B
C
D E
LIFTING RINGS
Item Brass Chrome Dimensions
A N-75910 N-75911 45L x 38W mm
B N-75912 N-75913 63L x 48W mm
C N-75914 N-75915 75L x 55W mm
D N-75916 N-75917 65L x 48W mm
LATCH RING
- with keeper
Item Brass Chrome Dimensions
E N-75926 N-75927 58L x 40W mm
F
FLUSH LIFTING RINGS
Item Brass Chrome Dimensions
F N-75918 N-75919 82L x 20W mm
Also available with rear stud fastening.
VICTORIAN BRASS BOLTS
Heavy Duty
Shoot/Slide
Bolts
DOOR STOP
- with rubber bung
Item Brass Chrome Length Width Height Rubber Bung
A N-75970 N-75971 67mm 37mm 25mm N-75978
MANUAL DOOR HOLDER
- with keeper
Item Brass Chrome Length Base Dia Rubber Bung
B N-75974 N-75975 45mm 40mm N-75978
C N-75976 N-75977 70mm 52mm N-75979
A B B
SPRING DOOR HOLDER
- with nylon keeper
Item Brass Chrome Length Width Height Nylon Keeper
A N-75960 N-75961 25mm 28mm 32mm 28x15mm
B N-75962 N-75963 40mm 38mm 48mm 45x28mm
A B
4" (103mm) Part No. N-75896
6" (153mm) Part No. N-75898
HASP (LEVER/LOCK)
Brass Part No. N-75938
Chrome Part No. N-75939
HATCH LOCKING DEVICE
Flush fitting lifting latch, an effective way to secure hatches and lockers.
Supplied with nylon backing plate and striker plate, locking version available.
Item Brass Chrome Size
A N-75940 N-75941 60L x 52W mm
B N-75942 N-75943 60L x 52W mm Complete with lock
B
A
C
MAGNET CATCHES
Description Size (mm) Part No.
White Nylon Mini (Pulls 2.5lbs) 32 x 19 x 11 N-75990
White Nylon Medium (Pulls 4lbs) 45 x 21 x 13 N-75991
TOGGLE FASTENERS
Item Brass Chrome Size
A N-75930 N-75931 30L x 35W mm
B N-75932 N-75933 75L x 35BW x 34BL mm
C N-75934 N-75935 50L x 40W x 10D mm Thread 40Lmm
26 NARROWBOAT CATALOGUE
Mortise
Latch
Rim Latch
Left Inside
Lock
Striker
Mortise
Lock
Brass & Chrome
Hardware
BRASS & CHROME HARDWARE
MORTISE LATCHES
- supplied with flat striker
Dimensions (mm)
Chrome A B C D E
N-76000 N-76001 80 15 42x12 57 37
MORTISE LOCKS
- supplied with flat striker & 2 keys
Brass Chrome A B C D E
N-76004 N-76005 Right 133 15 93x12 57 37
N-76006 N-76007 Left 133 15 93x12 57 37
Lock
Striker
RIM LATCHES
- supplied with flat striker
Brass Chrome A B C D
N-76010 N-76011 Rim Latch 72 15 25 46
N-74014 N-74015 Lock Striker (Keep) 64L x 30W
N-76016 N-76017 Box Striker (not shown) 70L x 15W
Right Inside Left Outside
Rim Lock
Right Outside
RIM LOCKS
- supplied with flat striker & 2 keys
Brass Chrome A B C D
N-76020 N-76021 Left Inside 112 15 25 46
N-76022 N-76023 Right Inside 112 15 25 46
N-76024 N-76025 Left Outside 112 15 25 46
N-76026 N-76027 Right Outside 112 15 25 46
N-76028 N-76029 Lock Striker (Keep) 110L x 30W
N-76030 N-76031 Box Striker (not shown) 112L x 15W
Spare keys available
Part No. UN-76020
A
B
ESCUTCHEON PLATES
Item Size(mm) Keyhole Shape Brass S/Steel
A 135Lx25W No Round N-76180 N-76181
B 135Lx25W Yes Round N-76182 N-76183
A B
HANDLE ROSES
Suitable for handle N-76112/3 only
Item Size Brass Chrome
A 45mm N-76150 N-76151
B 53L x 27W mm N-76156 N-76157
C
ESCUTCHEON PLATES
Item Diameter Brass Chrome
C 45mm N-76170 N-76171
D 45mm N-76173 N-76174
D
Other Types of Locks Available To Order
Anti-Rattle
Mortice Locks
Mortice Locks for
Plywood Doors
A
Locks for
Sliding Doors B
DOOR HANDLES & KNOBS
Item Brass Chrome Size: A x B
A N-76112 N-76113 57 x 112 mm
B N-76108 N-76109 36 x 84 mm
C N-76100 N-76101 29 x 53 x 27mm
C
NARROWBOAT CATALOGUE 27
Sisal, Polypropylene
Fenders & Cordage
FENDERS & CORDAGE
N-50070
N-50073
N-50074
N-50120
N-50056
N-50057
N-50100
N-50077
ROPE NARROWBOAT FENDERS
Our rope narrowboat fenders are available in either traditional natural sisal or durable black polypropylene outer cover. The Button, V and Tipcat fenders come with chain fixings – see the narrowboat catalogue for our full range of shackles and rigging screw tensioners.
N-50086 N-50088
Fender fixings:
Strong 4 chain fixing on Standard Button Fender
(N-50070/71) and V bow fender (N-50074/75)
3 chain fixings on Extended Button fender (N-50072/73), and Tipcat fender (N-50076/77)
N-50050
NARROWBOAT FENDERS AND CORDAGE
Part No. Description (Measurements are approximate) Colour
N-50070 Standard Poly Button Fender 20 x 26cm Dia. Black
N-50071 Standard Sisal Button Fender 20 x 26cm Dia. Natural
N-50072 Extended Poly Button Fender 37 x 25cm Dia. Black
N-50073 Extended Sisal Button Fender 37 x 25cm Dia. Natural
N-50074 V Poly Bow Fender 42 x 26cm Black
N-50075 V Sisal Bow Fender 42 x 26cm Natural
N-50076 Traditional Poly Tipcat Fender 64 x 26cm Dia. Black
N-50077 Traditional Sisal Tipcat Fender 64 x 26cm Dia. Natural
N-50085 Standard Sisal Side Fender 40 x 7cm Dia. Natural
N-50086 Standard Poly Side Fender 40 x 7cm Dia. Black
N-50087 Large Sisal Side Fender 40 x 10cm Dia. Natural
N-50088 Large Poly Side Fender 40 x 10cm Dia. Black
N-50050 Rubber Pipe Fender 33 x 4.5cm Dia. Black
N-50056 Fender Lanyard 8mm Dia. x 2m with soft eye Black*
N-50057 Fender Lanyard 8mm Dia. x 2m with soft eye Navy*
N-50100 Mooring Line 12mm Dia. x 10m with soft eye Natural look*
N-50101 Mooring Line 12mm Dia. x 10m with soft eye Black*
N-50102 Mooring Line 12mm Dia. x 10m with soft eye Navy*
N-50105 Mooring Line 14mm Dia. x 10m with soft eye Natural look*
N-50106 Mooring Line 14mm Dia. x 10m with soft eye Black*
N-50107 Mooring Line 14mm Dia. x 10m with soft eye Navy*
N-50109 Mooring Line 14mm Dia. x 15m with soft eye Black*
N-50120 Nylon Anchor Wrap 14mm Dia. x 18m White
* Multifilament Polypropylene
6-00032
PVC FENDERS
6-00020/21
6-00040/41/42
See full range of Fenders in Section 6
N-50101
N-50102
6-00052
Part No. Description Colour
6-00020 Bow Fender 510 x 450 x 120mm White
6-00021 Bow Fender 510 x 450 x 120mm Blue
6-00032 Wheel Style Canal Fender D280 x 75mm Black
6-00040 Heavy Canal Fender 420 x 120 x 60mm White
6-00041 Heavy Canal Fender 420 x 120 x 60mm Blue
6-00042 Heavy Canal Fender 420 x 120 x 60mm Black
6-00052 Slimline Canal Fender 20" (500 x 40mm) Black
28 NARROWBOAT CATALOGUE
A
B
Mooring Equipment
MOORING EQUIPMENT
MOORING PINS
Part No. Item Size Type Material
N-59000 A 24'' x 3 ⁄
4
" Plain Galvanised Steel
N-59003 B 600 x 19mm Half ring Galvanised Steel
C
B
PILING HOOK & RING
Galvanised steel for piling mooring.
Specification:
O.A. Length: 38cm
Length (B): 16cm
Width (C): 7.5cm
Ring I.D: 5.2cm
Part No. N-59011
N-59030 N-59032 N-59036 N-59037
BINNACLE RINGS
Plate with eye-ring suitable for mooring posts
Part No. Dimensions (Plate) Dimensions (Ring) Material
N-59030 50 x 50mm (LxW) 8mm x 50mm ID Galvanised
N-59032 50 x 40mm (LxW) 8mm x 50mm ID Stainless Steel
N-59036 40 x 30mm (LxW) 5mm x 25mm ID Brass
N-59037 40 x 30mm (LxW) 5mm x 25mm ID Chrome Plated Brass
A B C D
LUMP HAMMER
Wooden handle with Black Painted Head
Part No. N-59012 2 1 ⁄
2 lb
Part No. N-59014 4lb
ANTI VANDAL KEY
For locking paddle mechanisms, useful in
Birmingham and on the Leeds - Liverpool.
1 ⁄
2
" dia. steel with 1 ⁄
4
" (6mm) inset square in end. Length: 85mm
Part No. N-59029
WINDLASSES
Galvanised double headed lock keys
Part No. Type Length
N-59020 Standard 280mm (11")
N-59021 Long 450mm (18")
WOODEN POLES
E
BOAT HOOKS
Item Type Brass Chrome Dimensions
A Single N-59060 N-59061 185L x 22 ID mm
B Single N-59062 N-59063 170L x 28 ID mm
C Single N-59064 N-59065 185L x 34 ID mm
D Double N-59070 N-59071 185L x 34 ID mm
E Double N-59072 N-59073 255L x 38 ID mm
BOAT HOOK HEADS
Galvanised Steel
Part No. Type Pole Ø Overall Length
N-59080 Single 1 1 ⁄
2
" 10 1 ⁄
2
''
N-59081 Single 1 1 ⁄
2
" 12 1 ⁄
2
''
N-59082 Single 1 1 ⁄
2
" 14 1 ⁄
2
''
N-59090 Double 1 1 ⁄
2
" 8''
N-59091 Double 1 1 ⁄
2
" 9''
N-59092 Double 1 1 ⁄
2
" 10''
N-12901
N-12898
WOODEN BOAT HOOK POLE
33mm diameter x 2.4m long
Part No. N-12901
WOODEN BARGE POLE
45mm diameter. x 3.5m long
Part No. N-12898
DELIVERY
Unable to send via carrier. Please contact your local Aquafax sales depot for delivery methods.
NARROWBOAT CATALOGUE 29
30
Anchors, Swivels,
Chain & Shackles
ANCHORING ITEMS
ANCHORS -
H OT D IPPED G ALVANISED S TEEL
Folding Type
F
OLDING
T
YPE
Part No. Size
N-60001 1.5kg
N-60002 2.5kg
N-60003 3.2kg
N-60004 4kg
N-60005 6kg
Part No. Size
N-60006 8kg
N-60007 10kg
N-60008 12kg
N-60009 15kg
Long Link
Cruising Type
C RUISING T YPE
Part No. Size
N-60024 7kg
N-60025 10kg
N-60026 14kg
Part No. Size
N-60027 16kg
N-60028 20kg
N-60029 30kg
Short Link
CHAIN (Commercial Quality)
G ALVANISED M ILD S TEEL - S HORT L INK
Size P/ No per M P/ No per 10m P/ No per 30m
6mm ( 1 ⁄
4
") N-60100 N-60100/1 N-60100/3
8mm ( 5 ⁄
16
") N-60101 N-60101/1 N-60101/3
10mm ( 3 ⁄
8
") N-60102 N-60102/1 N-60102/3
12mm ( 1 ⁄
2
") N-60103 N-60103/1 N-60103/3
See Lewmar Section for Delta & CQR
(Plough) Anchors
G
ALVANISED
M
ILD
S
TEEL
- L
ONG
L
INK
Size P/ No per M P/ No per 10m P/ No per 30m
5mm ( 3 ⁄
16
") N-60110 N-60110/1 –
6mm ( 1 ⁄
4
") N-60111 N-60111/1 –
CHAIN CALIBRATED TO WINDLASSES SIZES AVAILABLE TO ORDER
CALIBRATED GALVANISED CHAIN
To Suit Lewmar Windlasses.
Specification: DIN766. Supplied in Buckets.
Size Length Part No.
6mm 30m LA00002
7mm 30m LA00021
7mm 60m LA00022
Size Length Part No.
8mm 30m LA00041
8mm 60m LA00042
10mm 30m LA00060
10mm 60m LA00062
OTHER SIZES & ISO SPECIFICATION AVAILABLE ON REQUEST
See Lewmar section for full range including Stainless Steel
G ALVANISED R EGULAR S/S TEEL R EGULAR E YE & E YE
GALVANISED REGULAR SWIVELS
Size A B C D R Breaking Part No.
mm mm mm mm mm Load (kg)
8mm ( 5 ⁄
16
") 41 20 25 32 90 2300 N-60191
10mm ( 3 ⁄
8
") 51 24 32 38 109 4800 N-60192
12mm ( 1 ⁄
2
") 63 33 38 51 138 6500 N-60193
S/STEEL REGULAR SWIVELS EYE & EYE
Size D L C B E Breaking Part No.
mm mm mm mm mm Load (kg)
8mm ( 5 ⁄
16
") 8 90 22 35 20 2500 N-60172
10mm ( 3 ⁄
8
") 10 115 27 44 24 3500 N-60173
13mm ( 1 ⁄
2
") 13 154 35 57 32 6000 N-60174
S/STEEL SINGLE SWIVEL ANCHOR CONNECTORS
D1 D2 C1 C2 W1 W2 L Part No.
mm mm mm mm mm mm mm
8 10 9 21 9 16 90 N-60162
12 13 13 30 13 20 120 N-60163
OTHER SWIVEL TYPES AVAILABLE TO ORDER
LOAD RATED 'D' SHACKLES
G ALVANISED & C OLLARED S CREW P IN
Drop forged to US Federal spec RR-C-271D IV
SWL (Tonnes) d D S W Part No.
1.00 3 ⁄
8
" 7 ⁄
16
" 1 1 ⁄
4
" 21 ⁄
32
" N-60252
1.50 7 ⁄
16
" 1 ⁄
2
" 1 7 ⁄
16
" 23 ⁄
32
" N-60253
2.00 1 ⁄
2
" 5 ⁄
8
" 1 5 ⁄
8
" 1 3 ⁄
16
" N-60254
3.25 5 ⁄
8
" 3 ⁄
4
" 2" 1 1 ⁄
16
" N-60255
LOAD RATED 'D' SHACKLES
S
TAINLESS
S
TEEL
SWL (Tonnes) d D S W Part No.
mm mm mm mm
1.00 10 11 32 17 N-60352
2.00 12 16 41 20 N-60353
3.00 16 20 52 26 N-60354
4.00 20 22 62 32 N-60355
NARROWBOAT CATALOGUE
DELIVERY
Unable to send via carrier. Please contact your local Aquafax sales depot for delivery methods.
SHACKLES (Commercial Grade)
Shackles, Screws, Hooks,
Ring Bolts & Eye Bolts
ANCHORING ITEMS
Bow
D Type D Countersunk
G ALVANISED M ILD S TEEL (Pin size = pin diameter)
Pin Size B L J Qty ‘D’ Type Bow D C/sunk
5mm ( 3 ⁄
16
") 5mm 20mm 10mm 20 N-60200 N-60210 –
6mm ( 1 ⁄
4
") 6mm 25mm 12mm 20 N-60201 N-60211 –
8mm ( 5 ⁄
16
") 8mm 32mm 16mm 20 N-60202 N-60212 –
10mm ( 3 ⁄
8
") 10mm 40mm 20mm 20 N-60203 N-60213 N-60223
11mm ( 7 ⁄
16
") 11mm 44mm 22mm 10 N-60204 – –
12mm ( 1 ⁄
2
") 12mm 48mm 24mm 10 N-60205 N-60215 N-60225
Bow
D Type
Twisted
S TAINLESS S TEEL S HACKLES (with collared pin)
Pin Size B L J ‘D’ Type Bow Twisted
4mm ( 3 ⁄
16
") 4mm 14mm 8mm N-60300 N-60310 N-60330
5mm ( 3 ⁄
16
) 5mm 17mm 10mm N-60301 N-60311 N-60331
6mm ( 1 ⁄
4
") 6mm 21mm 12mm N-60302 N-60312 N-60332
8mm ( 5 ⁄
16
") 8mm 28mm 16mm N-60303 N-60313 N-60333
10mm ( 3 ⁄
8
") 10mm 35mm 20mm N-60304 N-60314 N-60334
12mm ( 1 ⁄
2
") 12mm 42mm 24mm N-60305 N-60315 N-60335
For singles add /1 to part numbers. OTHER SIZES AVAILABLE TO SPECIAL ORDER
B
RASS
S
HACKLES
D Type
Bow
Pin Size B L J ‘D’ Type Bow
4mm ( 3 ⁄
16
") 2.5mm 15mm 5mm - N-60510
5mm ( 3 ⁄
16
) 5mm 18mm 9mm - N-60511
6mm ( 1 ⁄
4
") 6mm 27mm 11mm N-60503 -
8mm ( 5 ⁄
16
") 8mm 30mm 15mm N-60504 -
CARBINE HOOKS
S TAINLESS S TEEL
Dia Length Part No.
6mm 60mm N-60806
8mm 80mm N-60808
10mm 100mm N-60810
RIGGING (BOTTLE) SCREWS
G
ALVANISED
S
TEEL Closed body, jaw each end.
Thread/Pin Jaw Length (Open) Length (Closed) Part No.
6mm 9mm 254mm 178mm N-60601
8mm 9mm 305mm 203mm N-60602
10mm 11mm 349mm 235mm N-60603
L1 Closed / L2 Open d
FORGED STRAINING SCREWS
H OOK & E YE Galvanised or stainless steel. Sizes are approx.
Size d L1 L2 Eye ID Part No Part No.
(Closed) (Open) (Galvanised) (S/Steel)
6 6 122 182 9 N-60550 N-60560
8 8 155 235 10 N-60551 N-60561
10 10 185 280 13 N-60552 N-60562
RING BOLTS
S
TAINLESS
S
TEEL Closed body, jaw each end.
Thread/Pin Jaw Length (Open) Length (Closed) Part No.
5mm 6mm 200mm 130mm N-60630
6mm 7mm 220mm 140mm N-60631
8mm 8mm 260mm 170mm N-60632
10mm 10mm 310mm 200mm N-60633
OTHER SIZES & END CONFIGURATIONS AVAILABLE TO ORDER
EYEBOLTS
• Available in galvanised or stainless steel
• Supplied with nut and washer
Part No. N-60700 N-60710 N-60701 N-60711 N-60702 N-60712 N-60703 N-60713
Type Galv. S/S Galv. S/S Galv. S/S Galv. S/S
A (mm) 6 6 8 8 10 10 12 12
B (mm) 10 12 11 14 12 16 18 18
C (mm) 63 60 108 100 114 100 133 120
D (mm) 30 54 75 90 75 88 90 105
G ALAVANISED
Part No. Thread (Ø x L) C Ring x ID
N-59041 8 x 51mm 108mm 10 x 45mm
N-59042 10 x 51mm 114mm 10 x 50mm
S
TAINLESS
S
TEEL
Part No. Thread (Ø x L) C Ring x ID
N-59046 8 x 50mm 75mm 8 x 45mm
N-59047 10 x 75mm 100mm 10 x 50mm
B RASS
Part No. Thread (Ø x L) C Ring x ID Finish
N-59050 10 x 35mm 53mm 33 x 5mm Brass
N-59051 10 x 35mm 53mm 33 x 5mm Chrome
N-59052 12 x 50mm 70mm 45 x 8mm Brass
N-59053 12 x 50mm 70mm 45 x 8mm Chrome
NARROWBOAT CATALOGUE 31
Galvanic Isolators
Aqualight Lighting
Amps: 16A 32A
Width: 140mm* 165mm*
Depth: 55mm
Height: 65mm
93mm
130mm
Part No. 8-40990 8-40991
*(including mounting hole tabs)
ELECTRICS
GALVANIC ISOLATOR
W
ITH
I
NDICATOR For use with 120/240V 50//60Hz
Correctly installed the galvanic isolator will block galvanic currents in the shore earth connection up to 1.1V. Above this level current is allowed to pass maintaining the safety earth connection.
For almost every combination of metals likely to be found at a mooring the 1.1V maximum is sufficient to block corroding currents. When the voltage at the earth connection is greater than 1.1V, current is allowed to flow through the galvanic isolator potentially corroding submerged metals on the boat. In this situation the shore power should be disconnected to avoid hull corrosion.
D.C. galvanic current can also be caused by other shore earth connections such as telephone & cable TV.
• Designed, manufacturered and tested to meet ABYC.
A28 standard.
• Meets requirements of British
Marine Industry Federation.
• CE Marked
• Fully encapsulated
• RF suppression built in
• Analogue indicator shows any
DC current flowing in an easy to understand scale
LIGHTING
Aqualight light fittings are supplied with either 12V halogen bulbs or 12/24V LED built in light units. See Section 8 of our catalogue for our range of LED replacement bulbs to convert your existing lighting fitments.
*Replacement G4 Halogen bulbs use
Part No. 8-13123 12V 10W 10 pack
Part No. 8-13126 12V 20W 10 pack
Part No. 8-13124 24V 10W 10 pack
Part No. 8-13127 24V 20W 10 pack
Halogen Halogen Halogen
KENTRA S/S DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
12V 10W G4 Halogen*
54mm dia.
17mm
OA Size: 72mm dia.
Ingress Protection: IP40
Part No.
8-10200
KENTRA GOLD DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
12V 10W G4 Halogen*
54mm dia.
17mm
OA Size: 72mm dia.
Ingress Protection: IP40
Part No.
8-10201
KENTRA GOLD DOWNLIGHTER with switch
Bulb Type:
Cut Out:
Max. Depth:
12V 10W G4 Halogen*
54mm dia.
17mm
OA Size: 72mm dia.
Ingress Protection: IP40
Part No.
8-10203
Halogen Halogen Halogen
32
ARISAIG S/S DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
OA Size:
12V 10W G4 Halogen*
55mm dia.
16mm
77mm dia.
Ingress Protection: IP40
Part No.
8-10205
MORAR S/S DOWNLIGHTER with switch
Bulb Type: 12V 10W G4 Halogen*
Cut Out:
Max. Depth:
57mm dia.
16mm
OA Size: 77mm dia.
Ingress Protection: IP40
Part No.
8-10207
RESIPOLE S/S DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
OA Size:
12V 20W G4 Halogen*
66mm dia.
24mm
80mm dia.
Ingress Protection: IP40
Part No.
8-10209
NARROWBOAT CATALOGUE
See Section 8 of our catalogue for more bulbs and our range of LED replacement bulbs to convert your existing lighting fitments.
Halogen
LIGHTING
Halogen
Aqualight Halogen
& LED Lighting
Halogen
DORLIN S/S ADJUSTABLE
DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
OA Size:
12V 20W G4 Halogen*
66mm dia.
35mm
80mm dia.
Ingress Protection: IP40
Part No.
8-10211
SALEN S/S S/MOUNT
DOWNLIGHTER
Bulb Type:
Max. Depth:
OA Size:
12V 10W G4 Halogen*
22mm
90mm dia.
Ingress Protection: IP40
Part No.: 8-10213
SALEN S/S S/MOUNT
DOWNLIGHTER with switch
Bulb Type:
Max. Depth:
OA Size:
12V 10W G4 Halogen*
22mm
90mm dia.
Width with switch: 98mm
Ingress Protection: IP40
Part No. 8-10214
Halogen
LED LED
CARNA CHROME ADJUSTABLE
WALL LIGHT with switch
Bulb Type: 12V 10W G4 Halogen*
Max. Height:
Max. Depth:
114mm
125mm
Max. Width: 66mm
Ingress Protection: IP40
Part No.
8-10217
LAGA S/S ADJUSTABLE
DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
10-30V 1.5W P/LED
52mm dia.
31mm
OA Size: 65mm dia.
Ingress Protection: IP40
Part No. 8-10300
SANNA S/S DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
OA Size:
10-30V 2W 22 LED
54mm dia.
16mm
72mm dia.
Ingress Protection: IP40
Part No.
8-10303
LED LED LED
SANNA GOLD DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
10-30V 2W 22 LED
54mm dia.
16mm
OA Size: 72mm dia.
Ingress Protection: IP40
Part No.
8-10304
SANNA S/S DOWNLIGHTER with switch
Bulb Type:
Cut Out:
Max. Depth:
10-30V 2W 22 LED
54mm dia.
16mm
OA Size: 72mm dia.
Ingress Protection: IP40
Part No.
8-10305
SHONA S/S DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
10-30V 2W 22 LED
54mm dia.
16mm
OA Size: 72mm dia.
Ingress Protection: IP40
Part No.
8-10320
See Section 8 of our catalogue for more bulbs and our range of LED replacement bulbs to convert your existing lighting fitments.
NARROWBOAT CATALOGUE 33
Aqualight
LED Lighting
LED
LIGHTING
LED LED
ARDTOE S/S S/MOUNT
DOWNLIGHTER
Bulb Type:
Max. Depth:
10-30V 2W 22 LED
22mm
OA Size: 90mm dia.
Ingress Protection: IP40
Part No.
8-10328
ARDTOE S/S S/MOUNT
DOWNLIGHTER with switch
Bulb Type:
Max. Depth:
10-30V 2W 22 LED
22mm
OA Size: 90mm dia.
Width with switch: 98mm
Ingress Protection: IP40
Part No. 8-10329
RAHOY SATIN CHROME
DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
OA Size:
10-30V 2.5W 9 LED
61mm Dia.
28mm
93mm
Ingress Protection: IP44
Part No.
8-10400
LED LED LED
ARDMORE CHROME
DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
10-30V 2.5W 9 LED
61mm Dia.
29.5mm
OA Size: 94mm Dia.
Ingress Protection: IP44
Part No.
8-10405
LED
LAGA CHROME DOWNLIGHTER ETIVE CHROME DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
OA Size:
10-30V 2.5W 9 LED
61mm Dia.
29.5mm
93mm Dia.
Ingress Protection: IP44
Part No.
8-10410
Bulb Type:
Cut Out:
Max. Depth:
OA Size:
10-30V 2.5W 9 LED
61mm Dia.
29.5mm
93mm Dia.
Ingress Protection: IP44
Part No.
8-10415
TUNNEL LAMPS
34
SHIEL CHROME DOWNLIGHTER
Bulb Type:
Cut Out:
Max. Depth:
OA Size:
10-30V 2.5W 9 LED
61mm Dia
31mm
92mm Dia
Ingress Protection: IP44
Part No. 8-10420
LARGE ROUND TUNNEL LAMP
12V, 55W Halogen bulb included
Size: H: 160 x W: 160 x D: 70mm
Fixing Hole: 8mm dia.
Part No. 8-84035
Replacement bulbs:
12V 55W H3 Halogen Bulb Part No. 8-13106
24V 70W H3 Halogen Bulb Part No. 8-13107
RECTANGULAR TUNNEL LAMP
12V, 55W Halogen bulb included
Size: H: 95 x W: 180 x D: 85mm
Fixing Hole: 8mm dia.
Part No. 8-84041
Replacement bulbs:
12V 55W H3 Halogen Bulb Part No. 8-13106
24V 70W H3 Halogen Bulb Part No. 8-13107
NARROWBOAT CATALOGUE
See Section 8 of our catalogue for more bulbs and our range of LED replacement bulbs to convert your existing lighting fitments.
ELECTRICS
Navigation Lights, Horns,
Lamps & Spot Lights
N-80012
N-80000 N-80002 N-80004 N-80007
NAVIGATION LIGHTS
RINA Approved for boats up to 12 metres.
Brass body and plastic lens. Supplied with a 12V, 10W bulb.
Standard Model Dimensions = 90L x 70W x 63H mm
Description Brass Chrome Spare Lens
Masthead N-80000 N-80001 UN-80000-1
Port N-80002 N-80003 UN-80002-1
Starboard N-80004 N-80005 UN-80004-1
Stern N-80006 N-80007 UN-80000-1
Spare Bulb:
(Pack of 10)
P/No. 8-13154
12V HEADLAMPS
Part No. Description Diameter Depth
N-80110 Small Brass 110mm 65mm
N-80111 Small Chrome 110mm 65mm
N-80120 Large Brass 195mm 80mm
N-80121 Large Chrome 195mm 80mm
ELECTROMAGNETIC
HORN
Small electromagnetic horn but with high sound output.
Brass or S/Steel.
N-80010 N-80013
NAVIGATION LIGHTS - STREAMLINED
Brass body and plastic lens. Supplied with a 12V 4W bulb. Use standard
Masthead and Stern (left) to complete set.
Dimensions = 150L x 75W x 35H mm
Description Brass Chrome Spare Lens
Port N-80010 N-80011 UN-80010-1
Starboard N-80012 N-80013 UN-80012-1
Spare Bulb:
(Pack of 10)
P/No. 8-13062
MINI SPOT LIGHT (12V DC)
• Plastic switched modern halogen spotlight
• Not supplied with glass
Part No. Description
N-80502 Gold Coloured Plastic
N-80505 Satin Silver Coloured Plastic
ROUND WORK LAMP
12V, 55W Halogen
• Heavy duty, UV stable plastic housing
• Fully drop tested
• Metal parts are fully corrosion protected
• Pressed parabolic reflector includes a lacquered metalised finish to maintain an even light spread throughout the life of the product.
• Supplied with 12V, 55W (Part No.
8-13106) halogen bulbs and fixings
Dimension (HxWxD): Part No.
165 x 125 x 75mm 8-84032
HORNS
PLASTIC HORN
12V Electric low tone horn, c/w steel mounting bracket.
Part No. N-80465
Voltage Amps dB(A) Hz kg Length Dia. Brass S/Steel
12V 5 108 350 0.75 25cm 11cm N-80460 N-80461
TREM TRUMPET HORNS 12V
• Made in stainless steel
TREM CONCEALED
HORN WITH GRILL 12V
• Made in white ABS.
• Sound 107db (2m).
TREM LOW PROFILE HORN 12V
• Made of chromed plastic & s/steel
• Suitable for motor boats
Part No Description
8-41401 Concealed Horn with Grill (White) 12V
8-41403 Low Profile Horn S/S 12V
8-41407 Single Trumpet Horn S/S 12V
8-41408 Double Trumpet Horn S/S 12V
Dimensions (D x W x H)
85 x 40 mm (cut-out size)
110 x 100 x 80mm
410 x 100 x 125mm
470 x 190 x 125mm
8-41408
8-41407
NARROWBOAT CATALOGUE 35
36
Alde Boilers, Spares
& Accessories
ALDE COMFORT 2928 BALANCED FLUE BOILER
The balanced flue boiler has 12V ignition, automatic re-ignition along with 12V circulation pump and room thermostat.
Heating is provided by hot water circulating from the boiler through “low water content” radiators with domestic hot water heated via a secondary heat exchanger mounted at the back of the boiler. The comfort boiler is a room sealed appliance with a balanced flue to ensure a safe and comfortable environment.
Typical narrowboat layout incorporating two types of radiator and a twin coil calorifier.
A. Chimney cap
B. Intake hose
C. Level mark for glycol liquid
D. Cover
E Boiler thermostat
F Heat exchanger
G. Overheating protection
H. Flame damper
I. Ventilation duct
J. Burner
K. Window
L. Control panel
M. Expansion vessel
N. Circulation pump
Marine Applications: A calorifier can be incorporated when designing a system for a narrowboat with a water cooled engine. When fitting a calorifier, ensure that a water pump is fitted that does not exceed the maximum pressure of the calorifier. It is also necessary to fit isolation valves to the radiator circuit.
ALDE BOILER BALANCED FLUE
Complete boiler kit Part No. N-29100
Minimum Installation Space
Height: 1850mm
Width: 132mm
Depth: 400mm
Depth (with water heater): 425mm
Depth (with electric heater): 480mm
Technical Specification
Height: 1710mm
Width: 132mm
Depth: 220mm
Weight: 19.3kg
Nominal heat output: 5.8kW
Gas consumption: MAX 412g/h
ALDE BOILER SPARES
Item Part No.
Thermal Store old type w/o b. boiler N-29101
Thermal Store new type w/o b. boiler N-29103
Thermal Store new type with b. boiler N-29104
Room Thermostat N-29110
Thermostatic Programmer N-29111
Control Box Housing (2923/2928) N-29112
Control Knob N-29113
Micro Switch N-29114
Indication Lamp N-29115
Indicator Gauge N-29117
Spare Tube Nut N-29125
Spare Olive for Tube Nut N-29126
Item Part No.
Lower Front Cover N-29153
Upper Front Cover N-29154
Pilot Burner Assembly N-29201
Ignition Spark Plug N-29207
H T Leads for N-29207 N-29208
Control Housing N-29216
Ignition Transformer Kit N-29225
Overheat Cutout N-29230
Boiler Burner Gasket N-29236
Thermocouple - all boilers N-29245
Piezo Ignition for 2920 boiler N-29266
Boiler Panel Door N-29311
Item Part No.
Original Expansion Tank Long Hosetail N-29341
Expansion Tank (2923/2928) N-29343
Circulation Pump N-29421
Burner Assembly for 2923 Boiler N-29500
Balanced Flue Roof Terminal N-29300
Balanced Flue Cowl N-29516
Balanced Flue Air Inlet Cowl N-29523
Balanced Flue Fixing Ring N-29525
Balanced Flue Aluminium Ducting Hose N-29531
Rubber Elbow, 22mm ID N-29623
Rubber Joint, 22mm ID N-29628
Spring Clip (for rubber joint) N-29620
12V ROOM
THERMOSTAT
(supplied)
Can be used for other
12V applications
Part No. N-29110
12V PROGRAMMABLE
ROOM THERMOSTAT
(optional extra)
Controls central heating up to 6 times a day at times you choose.
Part No. N-29111
BUBBLE GAS LEAK DETECTOR
This leak detector is designed to be connected close to the outlet side of the gas regulator. It then provides an instant visible check for leaks. Bubbles in the sightings chamber indicate a leak downstream of the bubble tester. Supplied complete with fluid.
It may be used in boats, caravans and other applications.
The Boat Safety Scheme states that “an approved bubble tester is highly recommended”. The bubble tester is approved under the BSS.
Part No. N-29001 8mm Part No. N-29002 10mm
Spare Fluid: Part No. N-29003 (durable plastic spray 500ml bottle).
Technical Specification:
Dimensions (HxWxD): 90 x 60 x 30mm
Max. working pressure: 2 bar (29.4psi)
Capacity: 12kW
Pipe connections: 8mm/10mm compression inlet & outlet
NARROWBOAT CATALOGUE
DELIVERY
Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods.
Alde HE3010 Boiler
ALDE BOILER & ACCESSORIES
Electric heating cartridge 2kW
Fresh water
OUT
Electronics
Combustion fan
ALDE HE3010 COMPACT COMBI BOILER
The Alde HE3010 balanced flue combination boiler is powered by LPG and a low amp 12V supply. All connections are located on one side making installation and servicing easier.
Supplied in a kit with all necessary components, this popular boat model has a roof flue terminal, but a side mount terminal is also an option.
Cabin heating is distributed by polybutylene barrier piping (see pages 46/47), via aluminium radiators (see below) or mild steel domestic radiators (available from plumbing merchants).
The LPG boiler with built-in stored water provides around 12 litres of hot water
(40ºC) for 30 minutes. 230V AC from a generator or shore supply can power two immersion heaters giving a combination of 1, 2, or 3kW.
For larger boats needing a greater hot water capacity fit a stainless steel calorifier. See Section 9 for calorifiers and all plumbing fittings. Copper calorifiers or pipework are not approved due to aluminium heat exchanger.
Model options are:
N-29105 HE3010 Compact combi boiler with roof flue terminal and installation kit
N-29301 Wall flue terminal (optional)
N-29302 Roof flue terminal white (included)
N-29303 Roof flue terminal brass (optional)
N-29302
Roof Flue
(included)
N-29303
Roof Flue
(optional)
CONVECTORS
Convectors in Aluminium including mountings.
Ø 22mm Output ca 400 W/m.
Length Part No.
400mm N-29700
700mm N-29701
1000mm N-29702
1300mm N-29703
1600mm N-29704
1800mm N-29705
N-29301 Wall Flue (Optional)
Centre support for long convectors
Part No. N-29709
Glycol fluid
OUT
Solenoid valve
Electric heating cartridge 1kW
Fresh water IN
Glycol fluid IN
The kit includes:
Control Panel
(Included)
• HE3010 compact boiler
• Balanced flue kit including hoses, clips etc.
• Flue terminal N-29302 included
• Wiring loom
• Programmable control panel with thermostat
• Fresh water inlet connection,non-return valve, hoses etc.
• Expansion tank and 12V circulation pump
Please ensure fresh water supply pump to Alde 3010 does not exceed 9LPM. For larger boat installations - see our schematic on www.aquafax.co.uk for fitting second larger flow pump direct to calorifier for increased shower output.
Specification:
Height x Length x Breadth: 310 x 490 x 340mm
Weight: 14kg
Max gas output: 5.5kW (propane) 6.4kW (Butane)
Max electric power output: 2.1kW
Gas pressure: 28-30/37mbar
Fluid capacity: 8.4ltrs (fresh water), 3.5ltrs (glycol)
Max current: 1 amp (12V)
Min flue length: 0.5m (side), 2m (roof)
Max flue length: 1.5m (side), 3.5m (roof)
65mm
Convector
60mm
In-built Convector
IN-BUILT CONVECTORS
Convectors in Aluminium for recessing in stowage compartments etc. For Ø22mm heating system.
Power approx. 400 watt/m
Height including frame: 205mm (frame 20mm thick).
Depth: 65mm
Length Pipe Weight Part No.
inc. frame Length
305mm 336mm 0.3kg N-29710
555mm 577mm 0.5kg N-29712
805mm 830mm 0.75kg N-29714
DELIVERY
Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods.
NARROWBOAT CATALOGUE 37
38
Morsø Stoves and Spares
MORSØ 1410 MULTI-FUEL /
WOOD-BURNING STOVE
A classic radiant stove that will quickly and efficiently heat small rooms and Narrowboats. It is a traditional wood-burning stove decorated with Morsø’s classic squirrel relief on both sides.
Burns wood, briquettes, and smokeless fuel.
MORSØ 1430 MULTI-FUEL /
WOOD-BURNING STOVE
Ideal for small rooms and in
Narrowboat installations. It comes with a large stay-clean glass panel, convenient ashpan and low smoke emissions and is also fitted with bottom and rear heat shield.
Burns wood, briquettes, and smokeless fuel.
Additional Items
S/S Boiler for Morsø stoves - 8,000 BTU
Twin Wall Flue Kit for Morsø - Straight
Twin Wall Flue Kit for Morsø - 12'' Offset
MULTIFUEL STOVES
• Cast iron construction
• Radiant heat
• Primary and secondary air supply
• Soot-free glass door
• Riddling grate system
• Optional 8000 BTU stainless steel boiler available
• Air wash system
• Top or rear flue outlet
• Ash pan
Approvals: EN 13240
Part No. N-90020
Technical Specification:
Rated output: 4.5kW
Log length: 28cm
Flue outlet, internal Ø: 125mm
Weight: 70kg
Efficiency Net / Gross: 76/69%
Standard Leg Length:
Leg Options:
Height:
Width:
Depth:
100mm
150/250mm
546mm
388mm
438mm
• Cast iron construction
• Radiant heat
• Primary and secondary air supply
• Soot-free glass door
• Larger glass area
• Riddling grate system
• Optional 8000 BTU stainless steel boiler available
• Air wash system
• Pre-heated air wash system for use with wood
• Top or rear flue outlet
• Ash pan
Approvals: EN 13240
Part No. N-90021
Technical Specification:
Rated output: 4.6kW
Log length: 28cm
Flue outlet, internal Ø: 125mm
Weight: 75kg
Efficiency Net / Gross: 71/64.6%
Standard Leg Length:
Leg Options:
Height:
Width:
Depth:
100mm
150/250mm
546mm
388mm
438mm
N-90022
N-90023
N-90024
SPARES
Part No.
UN-90020-1
UN-90020-10
UN-90020-11
UN-90020-12
UN-90020-13
UN-90020-14
UN-90020-15
UN-90020-2
UN-90020-3
UN-90020-4
UN-90020-5
UN-90020-6
UN-90020-7
UN-90020-8
UN-90020-9
UN-90021-1
Description
Squirrel 1410 Glass Kit c/w clips, screws & gasket
Squirrel 1410/1430 threaded lug for flue collar each
Squirrel 1410/1430 screw for flue collar each
Squirrel 1410/1430 baffle/throat plate
Squirrel 1410/1430 front log retainer each
Squirrel 1410/1430 centre shaker grate
Squirrel 1410/1430 outer grate
Squirrel 1410/1430 Ash pan
Squirrel 1410/1430 Operating Tool
Squirrel 1410/1430 Side Firebrick
Squirrel 1410/1430 Back Firebrick
Squirrel 1410/1430 Blanking Plate
Squirrel 1410/1430 Plain Lug for blanking plate
Squirrel 1410/1430 Screw for blanking plate
Squirrel 1410/1430 Flue collar only
Squirrel 1430 Cleanheat glass kit c/w clips screws & gasket
INSTALLATION AND COMMISSIONING OF THE STOVE MUST BE
CARRIED OUT BY A COMPETENT PERSON. THE INSTALLER MUST
CONSIDER ALL ASPECTS OF SAFETY WHEN FITTING THE STOVE
AND FLUE PIPE SYSTEM AND INSTRUCT USERS HOW TO OPERATE
THE STOVE SAFELY AFTER COMMISSIONING THE STOVE.
NARROWBOAT CATALOGUE
DELIVERY
Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods.
HAMLET HARDY
• Burns wood and solid fuel
• Pre-stressed curved body for superior strength
• Pre-heated airwash system for cleaner glass
• Static multifuel grate
• Ash lip for a cleaner hearth
• Kooler to touch fire door handle
• Top or rear 4" mounting flue outlet
• 10 year main body guarantee
Part No. N-90000
Aarrow & Hamlet
Multifuel Stoves
MULTIFUEL STOVES
AARROW ECOBURN 5 AND ECOBURN 7
• Burns wood & solid fuel
• Pre-stressed curved body for superior strength
• Pre-heated airwash system for cleaner glass
• Secondary burn for higher efficiency
• Externally controlled multifuel riddling grate
• Primary air diversion system allows optimum draft control for burning wood or solid fuel
• Stainless steel throat plate for increased efficiency
• Stainless steel ash pan and cover for easy cleaning
• Internal and external ash lip
• Self levelling rear legs
• Top or rear flue fitting
• Lifetime main body guarantee
Part No. N-90008 (Ecoburn 5)
N-90009 (Ecoburn 7)
N-90000
N-90008
Model Hamlet Hardy Ecoburn 5 Ecoburn 7
Part No. N-90000 N-90008 N-90009
Min/Max Output (kW): 1.0 - 4.5 1.0 - 5.0 1.5 - 6.0
Max output with boiler - Room/Water (kW): 3.0 - 1.5 3.0 - 2.0 4.8 - 2.2
Height mm (in.): 455mm (18") 525mm (20 3 ⁄
4
") 554mm (21 3 ⁄
4
")
Width mm (in.): 350mm (13 3 ⁄
4
") 396mm (15 1 ⁄
2
") 461mm (18 1 ⁄
4
")
Depth mm (in.): 305mm (12") 372mm (14 3 ⁄
4
") 370mm (14 1 ⁄
2
")
Height to centre of rear flue mm (in.): 363mm (14 1 ⁄
4
") 424mm (16 3 ⁄
4
") 446mm (17 1 ⁄
2
")
Depth from back to centre of top flue mm (in.): 90mm (3 1 ⁄
2
") 94mm (3 3 ⁄
4
") 105mm (4 1 ⁄
4
")
Flue Diameter mm (in.): 102mm (4") 102mm (4") 127mm (5")
Features (see key opposite): 1, 2, 3, 4, 6, 8, 1, 2, 3, 4, 5, 7, 10 1, 2, 3, 4, 5, 7, 12,
10, 11 12, 13, 14, 15, 16, 17 13, 14, 15, 16, 17
Ideal Log Length: 8" 10" 12"
Optional Accessories
Floor Fixing Kit: N-90030 N-90030 N-90030
Stainless Steel Back Boiler: N-90031 (1.5kW) N-90035 (1.6kW) N-90055 (2.2kW)
N-90009
Key:
1 Multi fuel burns wood and solid fuel
2 Pre-stressed curved body
3 Pre-heated airwash system for cleaner glass
4 Secondary burn for higher efficiency
5 Primary air diversion system
6 Static multi fuel grate
7 Externally controlled riddling
8 Ash lip
9 Kooler door handle
10 Top or rear flue
11 10 year guarantee
12 Lifetime guarantee on stove body
13 Stainless steel throat plate
14 Stainless steel ash pan
15 Internal & external ash
16 Self levelling legs
17 Concealed fire door hinges
A
IRWASH
S
YSTEM
Aarrow’s renowned airwash system directs pre-heated air evenly across the fire door. This creates a shield between the fire chamber and the glass ensuring you always see the flames through the glass.
P
RIMARY
A
IR
D
IVERSION
S
YSTEM
(PADS)
The Primary Air Diversion System allows an underdraft of air beneath solid fuel, or with a simple adjustment using the riddling lever can given an over draft to burning wood.
The PADS feature offers an optimum environment for both fuels and gives an instant ash riddling function.
Coal Burning
The grate is moved to the ‘up’ position allowing an underdraught using the Riddling Lever
Wood Burning
Using the riddling lever, the grate is moved to the
’down’ position allowing the necessary overdraught.
DELIVERY
Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods.
NARROWBOAT CATALOGUE 39
Chimney Fittings and Accessories
STOVE ACCESSORIES & TRADITIONAL CHIMNEY FITTINGS
PLASTIC HEADER TANK
The tank has a 4 litre capacity and a flange either side to mount on a bulkhead. It is ideal for heating systems such as Eberspacher, Webasto, Mikuni, Hurricane and our range of fires when fitted correctly with a back boiler. The tank allows for expansion, easy level checks and top ups of the heating system. The 1 ⁄
2
" BSP female thread in the base will allow a number of different Speed-fit, hose connectors or compression fitting to be fitted to suit different plumbing applications.
• 4ltr capacity
• Light weight plastic weld construction with lid
•
1 ⁄
2
" BSPF connection suitable for a wide range of connections
• Dimensions: 225 x 280 x 110mm (HxWxD)
Part No.: N-92900
For Circulation Pumps, see Section 10.
Circulation Pump CM10P7-1 20mm
Ports 12V P/No. 10-24502-03
Circulation Pump CM10P7-1 20mm
Ports 24V P/No.10-24502-04
ARADA BOILERS
Made from stainless steel with
1" BSPM fittings (replaces the back two fire bricks).
10-24502-03
Boiler Size Part No.
Type 0 1.6kw N-90035
Type 1 2.6kw N-90041
STOVE PAINT
Specially developed to provide a durable, heat-resistant finish to all fire surfaces and other high temperature applications. Aarrow stove paint is a fast drying aerosol spray paint that enables you to colour all the connecting flues, pipes & metalwork to match your stove.
Colour
Anthracite (black) 400ml
Part No.
N-90099
REDUCING SOCKET
Fits between stove outlet and flue.
Cast Iron
5" - 4 1 ⁄
2
"
Part No.
N-93004R
FLUE OUTLET
Water heater flue outlet cowl. Silver alloy.
Height: 310mm
Base Dia.: 215mm
Flue ID: 95mm
Part No. N-93190
GEOCEL® FIRE BLOCK SEAL
High Temperature Resistant Sealant
A ready mixed and ready to use new generation fire cement that will withstand temperatures up to 1500°C. Suitable for sealing joints on solid fuel stove flues.
Bulk Pack: 12 x 310ml cartridges: Part No. 5-70020
Single: 310ml cartridge: Part No. 5-70020/1
INNER FLUE TRIM
Boat Interior flue trim
ID: 4 3 ⁄
4
" (120mm)
OD: 7" (180mm)
Part No. N-93030 Polished Brass
Part No. N-93031 Chrome
GLASS FIBRE ROPE LAGGING
Low density blown glass fibre core in braided cover of glass yarn. Ideal for flue and chimney joints. 25mm OD.
Part No. Length
N-93085 30m Coil
N-93086P 1m Carded
COLLAR COVER
• Black powder coated aluminium casting with polished brass ring
• Provides protection from the rain
To fit 6" (150mm) collar
Part No. N-93045
STOVE DOOR SEAL KIT
Plaited glass fibre rope in Graphite
Grey, c/w 7ml tube of 1,000ºC adhesive sealant.
K ITS
Part No. Description
N-90084 6mm Dia. x 2m (full kit)
N-90086 8mm Dia. x 2m (full kit)
S
PARES
Part No. Description
N-90080 7ml Thermafix 1,000ºC adhesive sealant
N-90094 6mm Dia. x 25m (Rope only)
N-90096 8mm Dia. x 25m (Rope only)
COLLAR COVER
• Electro plated steel sheet with fold away handle
• Provides protection from the rain
OA Dia.: 165mm Depth: 70mm
Part No. N-93047 To fit 6" collar
RAINHAT COWL
• Provides chimney protection from the rain
• For 6" OD collar chimneys
• Overall Diameter: 9
1 ⁄
2
" (24cm)
Part No. Description
N-93060 Black powder coated steel
N-93061 Polished Brass
Installation & commissioning of the stove must be carried out by a competent person. The installer must consider all aspects of safety when fitting the stove & flue pipe system and instruct users how to operate the stove safely after commissioning the stove.
40 NARROWBOAT CATALOGUE
Chimney
Chimney
Collar
CHIMNEYS AND ACCESSORIES
AQUAFAX CHIMNEYS, EXHAUST
STACKS & TITCH PIPE
C
Chimney Fittings and Accessories
D
B
E
A
F
Inner Flue Trim
Flue Pipe
Double Skin
AQUAFAX CHIMNEYS
Made from galvanised steel, black powder coated and fitted with solid brass handle & chain hook. A choice of single or double skin. A double skin redirects tar products back into the flue rather than onto the boats roof. Also available with chromed brass fittings.
For 6" (150mm) diameter chimney collar.
Item Height Brass Brass Chrome Plated Chrome Plated
Single Skin Double Skin Single Skin Double Skin
A 12" (300mm) N-93100 N-93105 - -
B 18" (450mm) N-93101 N-93106 N-93111 N-93116
C 24" (600mm) N-93102 N-93107 - -
Single Skin
AQUAFAX EXHAUST STACKS
without chain hooks.
Material: Black powder coated galvanised steel.
Item Size Height Part No.
D 3" (75mm) 32" (810mm) N-93160
E 3" (75mm) 18" (460mm) N-93161
AQUAFAX BRASS TITCH PIPE
without chain hook.
Material:
Polished brass.
Item Size Height Part No.
F 3" (75mm) 12" (300mm) N-93158
CHIMNEY CHAIN
Hearts & diamonds pattern
Length: 21" (530mm).
Part No. N-93125
EXHAUST COLLAR
• Cast iron oval exhaust collar to fit exhaust stacks N-93160, N-93161 & titch pipe N-93158
• ID 2" or 2
1 ⁄
2
" BSP OD Thread
2" BSPF Part No. N-93169
See page 6 for cap (N-01317G)
INNER SKIN
Redirects tar products back into the flue rather than the boats roof.
Inner skin for 6" (150mm) chimney.
Part No. N-93120
18" Chimney with Chrome
Plated Fittings
See Page 6 for Black Iron
Pipe Fittings
NARROWBOAT CATALOGUE 41
Copper Calorifiers
CALORIFIERS
AQUAFAX COPPER CALORIFIERS
NEW
These new Aquafax copper calorifiers are spray foam insulated and have an easy clean off-white outer casing. The calorifier includes 1kW 240 VAC immersion heater, two heating coils, a 3 bar pressure relief valve and thermostatic mixing valve providing temperature control on the hot water outlet.
50 LITRE VERTICAL TWIN COIL CALORIFIER
Coming Soon
Specification:
Max Working Pressure: 3 Bar
Connections:
1st Heating Coil:
2nd Heating Coil:
5 ⁄
8
'' hose barb
15mm push fit
Cold Feed Outlet:
Pressure Relief Valve Outlet: 1
15mm push fit
⁄
2
'' hose barb
Drain Cock*: 1 ⁄
2
'' hose barb
*vertical only
Coils:
22mm copper intergron fin tube to give fast heat up from the heating coils.
Insulation:
25mm thick foam insulation with galvanised white coated case and plastic moulded end covers.
50 LITRE HORIZONTAL TWIN COIL CALORIFIER
42 NARROWBOAT CATALOGUE
Part No Description
9-22171 50L Copper Calorifier 355 x 990mm Twin Coil Horizontal
9-22178 50L Copper Calorifier 355 x 825mm Twin Coil Vertical
Dimensions exclude pipe fittings.
Double Finrad Radiators,
Passad Heater/Demister
HEATING & ACCESSORIES
PASSAD M108 HEATER/DEMISTER
This hot air unit can be used for both hot cabin heating and windscreen demisting. Designed on the same principle as a vehicle heater but larger and to marine material specification for connection to your closed circuit fresh water cooling system.
As heat loss in pipes from engine is negligible the unit is best sited near to the cabin. Universal mounting normally below engine header tank.
The radiator, fan and electric motor are housed in rectangular S/S body. Remote external air supply can by used by S/S adaptor which fits rear of heater to take 2 x 89mm ID ducting, as illustrated right.
Technical Specifications:
• Size (mm): 450x140x335
• Motor: 100 Watt
• Free blowing: 10kw
• 3 Bar B/ Pressure: 6.5kw
• 3.5 Bar B/ Pressure: 4kw
• Water Inlet/Outlet 16mm Dia.
( 5 ⁄
8
I.D. Heater Hose).
• Three position switch supplied
• Air outlets (4) 55mm dia.
400mm
Part No. Description
9-92000 12V 8.3A average 6A fuse
9-92001 24V 4.2A average 6A fuse
9-92007 External air adaptor (shown left)
9-92008 Bulkhead flange adaptor for 90mm ID ducting
9-92009C Bulkhead flange adaptor for 55mm ID ducting
9-92006S 55mm S/S outlet blanking cover
220mm
140mm
CABIN OUTLETS
• 100mm dia. black bulkhead mounted units for cabins, complete with push open/close
360° air direction flaps
• Material: glass reinforced plastic
• Aperture requirement 77mm
• Outlet 55mm dia.
• Depth required 63mm, excluding hose.
Part No. 9-92004
WINDSCREEN OUTLET
Fan shaped, giving uniform airflow over screen area of 1250mm.
Part No. 9-92005
Size: Outlet: 250x17mm approx.
Inlet: 55mm dia.
Length: 190mm x 80mm deep (widest point)
DUCTING
Flexible PVC with shock resistant
PVC spiral.
Temp range:
-10° to +60°C
Part No. Description
1-91510C/1 55mm ID per metre
1-91510C 55mm ID 10m coil
1-91518C/1 90mm ID per metre
1-91518C 90mm ID 10m coil
DOUBLE FINRAD RADIATORS
• High performance output
• Maintenance free
• Simple installation
• Floor level mounting twin tube radiators of a modular design
• The 250 watt model is available in ‘U’ bend version for system end
• Covered finish: Powder coated, light grey
• Basic model finish: Aluminium fins on copper tube
• Range of fittings available
RIBBED HEATER HOSE
• Suitable for hot water transfer for heating, calorifiers and engines
• Black EPDM rubber ribbed hose
• High flexibility, makes it suitable for engine compartments
• Temp range: -40ºC to +120ºC
• Pressure - Working: 3 bar. Burst: 9 bar
Part No. Length
9-93056 28mm ID x 10m
9-93058 32mm ID x 10m
UNCOVERED
92
63.5
151
Heat Output
@ T 60ºC 0.56 kW/M
Heat Output
@ T 100ºC 1.07 kW/M
JOINT ASSEMBLY FOR COVERED RADIATORS:
Including 4 hose clips, 2 silicone hoses,
120mm overcover & 2 modified convector clips
Part No. 9-30749
STANDARD HEATER HOSE
• Synthetically reinforced
• Pressure - Working: 10 bar. Burst: 30 bar
Part No. Length
9-93040 1 ⁄
2
" ID x 20m
9-93041 5 ⁄
8
" ID x 20m
9-93042 3 ⁄
4
" ID x 20m
9-93043 22mm ID x 10m
9-93044 25mm ID x 10m
9-93045 28mm ID x 10m
9-93046 32mm ID x 10m
COVERED
All measurements in mm
74
Part No Type Length Watt Tube OD
9-30740 Covered Straight *492mm 250 22mm
9-30741 Covered Straight *996mm 500 22mm
9-30742 Covered Straight *1500mm 750 22mm
9-30744 Covered C/W Bend 590mm 250 22mm
9-30750 Uncovered Straight *492mm 250 22mm
9-30751 Uncovered Straight *996mm 500 22mm
9-30752 Uncovered Straight *1500mm 750 22mm
9-30754 Uncovered C/W Bend 590mm 250 22mm
*excluding copper tube
NARROWBOAT CATALOGUE 43
Shoreline Fridges
& Freezers
FRIDGES & FREEZERS
• All models fitted with a low energy 12/24V compressor system
• Quiet and reliable operation with low battery consumption
• Dual voltage operation. Automatically selects 12 or 24V
• Automatic low-voltage safety cut-out to prevent destructive battery drain
• External low battery status LED indicator fitted to all models
• Designed for free standing operation in 30°C max. ambient temp
• All models are CFC free and CE marked
NEW
N-86053
NEW
NEW
CABLE SIZE GUIDE
The supply cable to the fridge or freezer must be the correct size and should allow for a voltage drop over the length of the cable from the battery bank supplying the appliance to the compressor.
Note: poor connections on terminals, switches and fuse holders in the circuit can also cause voltage drops.
N-86103
N-88090
N-86151
N-88059
Matches
N-87105 larder fridge
Length of cable from fridge or freezer to battery bank (m)
See Section 8 of our catalogue for electrical cable, terminal connectors, battery isolation switches and fuse holders.
†Part No. N-89039
Mini chest freezer with optional sliding rails.
N-89038
(without rails)
N-87105
N-89080
Please Note: Add 25mm to the overall external dimensions of the fridge or freezer to allow for ventilation & dissipation of heat from the condenser.
POWERBOX (AC/DC) CONVERTER
•Automatic priority switching to mains operation
•Seamless change-over from AC to DC to AC
•Built-in overheat protection
Dimensions (HxWxD):
50 x 140 x 190mm
Part No. N-89999
44
N-86053 RR5005 Fridge with ice-box White 492 472 450 41 4 ✖ ✔ ✖ 0 0.7
N-86103 RK132W Fridge with ice-box White 845 495 540 85 13 ✔ ✔ LED 2 1.59
N-86103C RK132C Fridge with ice-box Cream 845 495 540 85 13 ✔ ✔ LED 2 1.59
N-86103S RK132S Fridge with ice-box Silver 845 495 540 85 13 ✔ ✔ LED 2 1.59
N-86151 RR5511W Fridge with ice-box White 850 545 554 123 16 ✔ ✔ LED 2 1.59
N-87105 RL5010 Larder Fridge White 845 501 540 110 n/a ✔ ✔ STD n/a 0.8
N-88059 FF2022W Fridge/Freezer White 850 480 520 63 25 ✖ ✔ LED 3 2.29
N-88090 FD206 Fridge/Freezer White 1290 478 502 97 33 ✖ ✔ LED 3 2.1
N-89038 MCF36 Mini chest freezer White 495 665 440 n/a 36 ✖ ✖ ✖ 3 2.6
N-89039 MCF36+Rails Mini chest freezer† White 495 665 455 n/a 36 ✖ ✖ ✖ 3 2.6
N-89080 RU5010 Upright Freezer White 845 501 540 n/a 74 ✖ ✔ ✖ 3 1.9
*Consumption based on the fridge operating on 12V with an ambient temperature of 32ºC. Fridge supply should be protected with a 15A fuse for 12V DC and 7.5A for 24V DC supply.
NARROWBOAT CATALOGUE
DELIVERY
Unable to send via usual carriers due to weight.
Please contact your local Aquafax sales depot.
Hep
2
O Plumbing
Fittings
PLUMBING - FITTINGS
HEP
2
O PLUMBING FITTINGS
The new, technologically advanced next generation
Hep
2
O range is here.
Packed with revolutionary unique new features, In4Sure™ joint recognition that actually tells you when inserted and the
HepKey™ demounting system provides super-secure but fully demountable joints. Hep
2
O is quicker, more reliable and easier to use than ever before.
And while the fittings are all totally new, it’s still the same easy to work with pipe as before, the colour has just changed to white.
Hep
2
O is manufactured and kitemarked to Class S of BS 7291
50 Year Guarantee against defects in materials or manufacturing of all Hep
2
O pipe
& fittings.
In4Sure™- How it Works
The profiled end of the re-designed
SmartSleeve™ pipe insert (P-51360) works with the internal castellations of the new Hep
2
O fitting.
Just insert, push, twist and feel for the rumble to know the pipe is fully inserted, making a 100% secure connection.
Hep
2
O fitting
Super-tough new white fitting.
Internal castellations
O-ring
Offers a reliable seal in both hot and cold water systems.
Grab-ring
Strong, high quality 316 stainless steel re-engineered grab-ring. Able to grip plastic and copper pipe, the carefully angled teeth have been aligned for easy fitting and maximum grip.
Polybutylene Pipe
Cuts, bends and comes off the coil straight, in exactly the same way it always has.
SmartSleeve™Pipe Insert
The profiled end allows joint recognition, reduces the force required to make a secure connection, and stays in the pipe when demounted.
HepKey™- How it Works
The innovative pipe release key that only demounts when you want it to.
Colour-coded to the pipe size, the
HepKey™ triggers the grab-ring within the fitting to release the pipe. As the fitting is tamper-proof, the pipe will only release when you want it to. So it’s fast, simple and eliminates the risk of accidental and potentially expensive demounting.
*Pocket-sized HepKey™ coming soon.
Hep
2
O fitting
Super-tough new white fitting.
HepKey™
The smaller pocket-sized* HepKey™ clips around the pipe and needs to be pushed against the fitting to release the pipe.
Quick and easy to use and it achieves demounting with the minimum of effort.
HepKey Plus™
Available in each of the four fitting sizes,
HepKey Plus™ simply clips onto the fitting, depresses the inner collar which releases the integral grab-ring and allows the pipe to be removed.
Grab-ring
Located behind the release sleeve, it is captive within the fitting so can’t fall out and get lost. Manufactured from high quality 316 stainless steel that can be used repeatedly without any loss of strength so the fitting can be used and re-used.
Hep
2
O
®
POLYBUTYLENE PIPE Same Great Pipe – Now in White.
Not everything has changed. Hep
2
O pipe remains the same, all except for the colour. It’s still exceptionally flexible and still comes off the coil in straight useable lengths that can easily be cabled into position. The only thing that’s changed is the colour. Now in white to match the new fittings, exposed areas of pipe work now look clean and more attractive.
Size Length Model Type
10mm 50m Coil HXX50/10 Barrier
15mm 25m Coil HXP25/15 Standard
15mm 3m Straight HXP03/15 Standard
15mm 6m Straight HXX06/15 Barrier
15mm 50m Coil HXP50/15 Standard
15mm 100m Coil HXP100/15 Standard
22mm 3m Straight HXP03/22 Standard
22mm 6m Straight HXX06/22 Barrier
22mm 25m Coil HXP25/22 Standard
22mm 50m Coil HXP50/22 Standard
Part No.
P-51001
P-51002
P-51003
P-51004
P-51005
P-51006
P-51007
P-51008
P-51010
P-51009
For Calorifiers,
Sinks & Taps
See Section 9
All BiTite™ Hep
2
O fittings are fully compatible with Hep
2
O pipe & copper pipe.
SEE SECTION 1 FOR COPPER PIPE.
NARROWBOAT CATALOGUE 45
Hep
2
O Plumbing
Fittings
PLUMBING - FITTINGS
The Professional Flexible Plumbing System for Hot & Cold Water & Central Heating
AUXILIARY BiTite™ FITTINGS
WALL PLATE ELBOW
DZR Brass / new white plastic.
1
Size Model Part No.
⁄
2
" BSPF x15mm HX6/15 P-51206
BALL VALVES
Chrome Nickel finish Brass ball valve, new white plastic.
Size Model Part No.
15mm (85x50x120mm) HX22 P-51233
22mm (96x60x142mm) HX22 P-51333
CYLINDER CONNECTOR
DZR Brass (cone ended socket adapter with nut)
Size Model Part No.
1" BSP x 22mm HX34/22 P-51334
FEMALE ADAPTOR
DZR Brass / new white plastic socket.
Size Model Part No.
1 ⁄
2
" BSP x 15mm HX28/15 P-51228
3 ⁄
4
" BSP x 15mm HX24/15 P-51228A
3 ⁄
4
" BSP x 22mm HX28/22 P-51328
1'' BSP X 28mm HX28/28 P-51428
MALE ADAPTOR
DZR Brass / new white plastic socket.
Size Model Part No.
3
1 ⁄
2
" BSP x 15mm HX29/15 P-51229
⁄
4
" BSP x 22mm HX29/22 P-51329
1'' BSP X 28mm HX29/28 P-51429
FEMALE ADAPTOR
DZR Brass / Hep
2
O spigot
Size Model Part No.
1 ⁄
2
" BSP x 15mm HX30/15 P-51230
3 ⁄
4
" BSP x 22mm HX30/22 P-51330
DOUBLE CHECK VALVE
New white plastic.
Size Model Part No.
15 x 15mm HX72/15 P-51272
MALE ADAPTOR
DZR Brass / Hep
2
O spigot
Size Model Part No.
3
1 ⁄
2
" BSP x 15mm HX31/15 P-51231
⁄
4
" BSP x 22mm HX31/22 P-51331
1" BSP x 28mm HX31/28 P-51431
GATE VALVE (HOT/COLD)
Brass / new white plastic.
Size Model Part No.
15 x 15mm HX35/15 P-51235
22 x 22mm HX35/22 P-51335
BRASS DRAIN COCK
Size Model Part No.
1 ⁄
2
" Hose x 15mm Spigot HX32/15 P-51232
STOP COCK (COLD WATER)
New white plastic.
Size Model Part No.
15 x 15mm HX36/15 P-51236
22 x 22mm HX36/22 P-51336
SHUT OFF VALVE (HOT/COLD)
All new white plastic with reversible top for either hot or cold.
Size Model Part No.
15 x 15mm HX37/15 P-51237
ADAPTOR
Brass reducing socket.
Size Model Part No.
1 ⁄
2
" BSPM x 3 ⁄
8
" BSPF HX39/15 P-51239
APPLIANCE VALVE (HOT/COLD)
All new white plastic with reversible top for either hot or cold.
Size Model Part No.
3 ⁄
4
" BSP x 15mm HX38/15 P-51238
REPLACEMENT FITTINGS & ACCESSORIES FOR BiTite™ Hep
2
O™ FITTINGS
HEPKEY DEMOUNTING TOOL
(Pack of 10)
Size Model Part No.
15mm HX79/15 P-51251
22mm HX79/22 P-51351
BLANKING PEG (Pack of 10)
Size Model Part No.
15mm HX44/15 P-51252
22mm HX44/22 P-51352
‘O’ RING (Pack of 20)
Size Model Part No.
15mm HX51/15 P-51257
46 NARROWBOAT CATALOGUE
GRAB WEDGES (Pack of 20)
Size Model Part No.
15mm HX46/15 P-51258
Hep
2
O Plumbing
Fittings
PLUMBING - FITTINGS
The Professional Flexible Plumbing System for Hot & Cold Water & Central Heating
PIPE FITTINGS AND ACCESSORIES
COLD FORMING BEND
Metal fixture with passivate finish
Size Model Part No.
15mm HX75/15 P-51275
22mm HX75/22 P-51375
PIPE CLIP
White plastic - Screw fixing (Bag of 50)
Size Model Part No.
15mm HX85/15 P-51285
22mm HX85/22 P-51385
28mm HX85/28 P-51485
SMARTSLEEVE PIPE SUPPORT
S/S Sleeve. Always fit a support sleeve
Size Model Part No. Pack Qty
15mm HX60/15 P-51260 50
22mm HX60/22 P-51360 50
28mm HX60/28 P-51460 20
PIPE CLIP
Plastic - Nail fixing (Bag of 50)
Size Model Part No.
15mm HX65/15 P-51265
22mm HX65/22 P-51365
PIPE CUTTER
Up to 28mm Pipe.
Ratchet type HD78.
Part No. P-51053
PIPE CUTTER
Designed for DIY user.
Scissor type HD74.
Part No. P-51052
SILICONE
LUBRICANT
125gm Tub S254
Part No. P-51051
DEMOUNTABLE BiTite™ FITTINGS
STRAIGHT CONNECTOR
Size Model Part No.
15 x 15mm HD1/15 P-51201
22 x 22mm HD1/22 P-51301
28 x 28mm HD1/28 P-51401
EQUAL TEE
Size Model Part No.
15 x 15 x 15mm HD10/15 P-51210
22 x 22 x 22mm HD10/22 P-51310
28 x 28 x 28mm HD10/28 P-51410
SOCKET REDUCER
Size Model Part No.
15 x 10mm HD2/15 P-51202
22 x 15mm HD2/22 P-51302
28 x 22mm HD2/28 P-51402
END REDUCED TEE
Size Model Part No.
22 x 15 x 22mm HD12/22 P-51312
28 x 22 x 28mm HD12/28 P-51412
EQUAL ELBOW
Size Model Part No.
15 x 15mm HD5/15 P-51205
22 x 22mm HD5/22 P-51305
28 x 28mm HD5/28 P-51405
STRAIGHT TAP CONNECTOR
With brass nut and fibre washer
Size Model Part No.
3
1 ⁄
2
" x 15mm HD25A/15 P-51225A
⁄
4
" x 15mm HD25B/15 P-51225B
3 ⁄
4
" x 22mm HD25B/22 P-51325
BRANCH REDUCED TEE
Size Model Part No.
15 x 15 x 10mm HD13/15 P-51213
22 x 22 x 15mm HD13/22 P-51313
BRANCH & ONE END REDUCED TEE
Size Model Part No.
22 x 15 x 15mm HD14/22 P-51314
28 x 22 x 22mm HD14/28 P-51414
BENT TAP CONNECTOR
Size Model Part No.
1 ⁄
2
" BSP x 15mm HD27/15 P-51227
TANK CONNECTOR
With BSP tail and back nut (cold only)
Size Model Part No.
3
1 ⁄
2
" BSP x 15mm HX20/15 P-51220
⁄
4
" BSP x 22mm HX20/22 P-51320
DEMOUNTABLE STOP END
New white plastic
Size Model Part No.
15mm HD62/15 P-51207
22mm HD62/22 P-51208
See page 45 for Hep
2
O
Polybutylene Pipe. Same great pipe – now in white.
All BiTite™ Hep
2
O fittings are fully compatible with Hep
2
O pipe & copper pipe.
SEE SECTION 1 FOR COPPER PIPE.
NARROWBOAT CATALOGUE 47
Aquafax Catalogue
THE AQUAFAX CATALOGUE
For a full range of marine fittings see our printed catalogues (below) or visit our website: www.aquafax.co.uk
PIPE FITTINGS,
VALVES,
HOSE & CLIPS,
GAS EQUIPMENT
SKIN FITTINGS,
WATER STRAINERS,
ANODES,
EXHAUST EQUIPMENT,
BEARINGS, OIL
FUEL ACCESSORIES
PLASTIC SEACOCKS
& PIPE FITTINGS
CONSUMABLES,
PAINTS & WOODCARE,
EPOXY SYSTEMS,
SEALANTS,
SANDING & FINISHING,
OIL & LUBRICANTS
CLEANERS
ULTRAFLEX ENGINE
CONTROLS & CABLES,
HYDRAULIC & MANUAL
STEERING SYSTEMS,
HATCH LIFTERS,
ENGINE INSTRUMENTS
AERIALS & ACCESSORIES,
GENERAL CHANDLERY,
SAFETY EQUIPMENT,
FENDERS & LIFEBUOYS,
FRIDGES & COOKERS
COMPASSES
HARDWARE,
HINGES,
CABIN FITTINGS,
PADLOCKS
ELECTRICAL EQUIPMENT,
BATTERIES, CABLES,
TERMINALS, LIGHTS,
SWITCH PANELS
& ACCESSORIES
PATAY PUMPS,
FLOJET PUMPS,
CALORIFIERS,
PUSH-FIT PLUMBING,
TAPS, SINKS, TOILETS,
WATER FILTERS,
JOHNSON PUMP -
BILGE,
ENGINE COOLING,
DECK WASHING,
GENERAL PURPOSE
PUMPS & ACCESSORIES
MASTERVOLT -
INVERTERS & COMBIS,
BATTERY CHARGERS,
GENERATORS,
DISTRIBUTION,
COMPLETE SYSTEMS
LEWMAR -
WINDLASSES,
ANCHORS,
THRUSTERS,
WINCHES,
HARDWARE,
STEERING
DELIVERY
Please note that we are unable to deliver via our normal carrier certain fragile or heavy products identified .
these include oils, liquids, multifuel stoves, Alde boilers, cookers & ovens, batteries, finrads, fridges/freezers, magnesium anodes, anchors, chain, rudder stocks, swannecks. Exceptions can be made at customers risk and extra cost. Pallets and accessories are charged at cost and are returnable for credit.
48 NARROWBOAT CATALOGUE
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project