Wolf SO30U, DO30F, SO30F, DO30U, SO36U oven, WD30 warming drawer, microwave, CT36E, CT15E, CT30E, CT15G, CT30G, CT36G cooktop Design guide
Below you will find brief information for oven SO30U, oven DO30F, oven SO30F, oven DO30U, oven SO36U, warming drawer WD30. The Wolf ovens are designed to give the user the ability to cook any dish, from a simple roast to a complex pastry. The dual convection fans ensure even heat distribution throughout the oven, while the hidden bake element allows for easy cleaning. The warming drawer is perfect for keeping food warm until it's ready to serve. You can also use it to gently reheat delicate foods.
Advertisement
Advertisement
T A B L E O F C O N T E N T S
Wolf Built-in Ovens
Wolf Warming Drawers
Wolf Microwave Ovens
Wolf Cooktops
4-11
12-13
14-15
16
Wolf Electric Cooktops
Wolf Gas Cooktops
17-20
21-24
Wolf Integrated Cooktops 25-29
Wolf Dual Fuel Ranges 30-33
Wolf Gas Ranges
Wolf Gas Rangetops
Wolf Gas BBQ Grills
Wolf Ventilation
Wolf Warranty
34-37
38-41
42-45
46-61
62
W E L C O M E T O W O L F
A P P L I A N C E C O M P A N Y
In this Design Guide, you’ll find all the necessary information for specifying a Wolf oven, cooktop, range, rangetop, BBQ grill or ventilation equipment into the next kitchen or home you design.
Each unit is handcrafted with the knowledge and experience gleaned from being the premier supplier of cooking equipment to professional chefs and their restaurants for nearly
70 years.
Sub-Zero, a corporate companion and kitchen soul mate, shares the identical values and pride we practice in providing the best cooking equipment.
A Wolf is beautiful and will complement any design you use, whether it be contemporary or traditional.
But that’s not why many customers turn to us. We have a passion for cooking and it shows in our work.
Consumers appreciate the unique features we have built-in to our many different models. You can refer to specifics as you page through this guide.
The features are as numerous as the various units you have to choose from. But one of the more prominent highlights is the patent-pending Wolf
Dual Convection System that is in all of our built-in ovens and dual fuel ranges. It delivers even temperature and airflow throughout the oven. Two fans and four heating elements operate either simultaneously or in sequence, depending on which one of the eight different cooking modes your client chooses.
In addition, our Dual Stacked Burners on the gas cooktops and dual fuel ranges are all sealed and all of them offer you the capability of simmering foods.
Our electric cooktops are unique to the industry with their capabilities of providing simmer to all elements and offer the melt feature on one of the elements. The triple element on the
36" (914 mm) cooktop can generate up to 2,700 watts for those large pots that need fast boiling.
The sizes, alternative tops and selection of the standard classic stainless steel and the premium finishes of carbon or platinum stainless steel make your decision-making process much more fun for you and your clients. Now you can give them exactly what they want without sacrificing the quality they demand.
In all your applications you can depend on Wolf. That reputation is even stronger because it is backed by
Sub-Zero. This is one of those situations where the combination of the two is really greater than the sum or their parts.
Each Wolf unit is backed by the best warranty in the business. Please refer to page 62 for the details.
Review this Design Guide in greater detail when you get a chance and keep it as a handy reference. We are confident you will like what you see.
IMPORTANT NOTE: As you read the information in this guide, you will notice CAUTION and WARNING symbols. This blocked information is important for the safe and efficient installation of the Wolf equipment.
There are two types of potential hazards that may occur during any installation.
CAUTION
signals a situation where minor injury or product damage may occur if you do not follow instructions.
WARNING
states a hazard that may cause serious injury or death if precautions are not followed.
Another footnote we would like to identify is; IMPORTANT NOTE, which highlights information that is especially relevant to a problem-free installation.
3
4
Model SO30F
30" (762 mm) Single Oven
Framed
Model SO30U
30" (762 mm) Single Oven
Unframed
Model DO30F
30" (762 mm) Double Oven
Framed
Model DO30U
30" (762 mm) Double Oven
Unframed
Model SO36U
36" (914 mm) Single Oven
Unframed
W
O L F
B
U I L T
- I
N
O
V E N S
B E A U T Y , V A R I E T Y A N D
S E R I O U S P E R F O R M A N C E
It’s hard to put into a few words the differences you will see in Wolf compared to other cooking appliances on the market. Some of those differences are very dramatic like the three finishes offered to you and your clients. There is the standard classic stainless steel. But look more and you will see two premium finishes offered in platinum and carbon stainless steel.
The platinum look let’s you have the beauty of stainless steel without the sheen and reduces the amount of fingerprints, whereas the carbon stainless steel is unlike any other black appliance you have experienced. You must see it to truly have a feel for the depth and beauty it offers.
Now look closer and you will see two different door styles offered – framed and unframed. The framed is more traditional and lends itself nicely with a professional rangetop, while the unframed is sleek and contemporary in appearance. But these are our labels, you can call them what you want and mix and match as you choose.
Did you notice that the control panel closes? It’s a nice feature and will enable you to hide that control panel that many of us have labored to make functional and tried to make beautiful.
There are other exterior appointments that will also catch your eye, or maybe not because we have tried to enhance fit and finish. We want to make sure our ovens enhance your design and not alter your look.
Inside the beauty, design and functionality continue. Lose your breath to the beautiful blue interior. Notice the dual convection fans. As you open the oven door, see and feel the smoothness of the door damper system. Pull that bottom oven rack all the way out and notice how it is nestled on the door rails. Brilliant halogen lights illuminate the inside.
And lastly, see if you can find the hidden bake element.
There are 30" (762 mm) and 36" (914 mm) ovens. The 30" (762 mm) models come in classic, platinum and carbon stainless steel finishes and can be ordered as single or double ovens. The
30" (762 mm) oven framed door is only offered in classic stainless steel, while the unframed door is available in all three looks, classic, platinum and carbon stainless steel.
The 36" (914 mm) model can also be ordered in the three different finishes, as a single unit with an unframed door only.
All models offer the following cooking modes: Bake, Roast, Broil, Convection
Bake, Convection Roast, Convection
Broil, Convection and Bake Stone. The
Bake Stone mode requires a Bake
Stone accessory package, available from your Wolf dealer.
5
6
W
O L F
B
U I L T
- I
N
O
V E N S
F E A T U R E S
• Dual convection logic control system (patent pending)
• Rotating touch control panel
• Door damper system
• Temperature probe and receptacle
• Three removable racks
• Six-level rack guide for 30"
(762 mm) ovens, five-level rack guide for 36" (914 mm) oven
• Full-extension bottom rack
• Dual halogen lighting
• Hidden bake element
• Recessed broil element
• Large viewing triple pane window
• Self-cleaning
• Sabbath feature
• Optional bake stone
Recessed broil element
Three removable racks
Full-extension bottom rack
Hidden bake element
Door hinge with hydraulic damper
Large viewing triple pane window
Rotating touch control panel
Temperature probe receptacle
Dual halogen lighting
Six-level rack guide
Recessed broil element
Three removable racks
Full-extension bottom rack
Hidden bake element
Door hinge with hydraulic damper
Large viewing triple pane window
Single Built-in Oven (Model SO30F shown)
Rotating touch control panel
Temperature probe receptacle
Dual halogen lighting
Six-level rack guide
* This appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org.
Double Built-in Oven (Model DO30F shown)
W
O L F
B
U I L T
- I
N
O
V E N S
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
While you have many design options to consider from a selection point of view, there are only three different sizes to consider when planning for your layout. You can choose either a
30" (762 mm) or 36" (914 mm) single oven or a 30" (762 mm) double oven.
Oven Interior Dimensions
The 30" (762 mm) single oven interior dimensions, as well as each of the double ovens are 25" (635 mm) wide by 16-1/4" (413 mm) high and
19" (483 mm) deep. The interior of the 36" (914 mm) single oven is 30"
(762 mm) wide by 13-1/4" (337 mm) high and 19" (483 mm) deep.
27 1 /
2
"
(699 mm)
24"
(610 mm)
29 7 /
8
"
(759 mm)
30" (762 mm) Single Oven Framed
Model SO30F shown
24 3 /
8
"
(619 mm)
24"
(610 mm)
35 5 / 8 "
(905 mm)
36" (914 mm) Single Oven Unframed
Model SO36U shown
Space Requirements
The illustrations of the three different oven sizes give you overall dimensions which include the oven face trim. The finished cut-out dimensions you need to incorporate into your plans are shown in the illustrations on the following pages.
This appliance must be installed in accordance with National Electrical
Codes, as well as all state, municipal and local codes. The correct voltage, frequency and amperage must be supplied to the appliance from a dedicated, grounded circuit that is protected by a properly sized circuit breaker or time delay fuse. The proper voltage, frequency and amperage ratings are listed on the model / serial rating plate.
Refer to the following pages for installation specifics for the three different oven sizes.
50"
(1269 mm)
24"
(610 mm)
29 7 /
8
"
(759 mm)
30" (762 mm) Double Oven Framed
Model DO30F shown
7
W
O L F
B
U I L T
- I
N
O
V E N S
3 0 " ( 7 6 2 m m )
S I N G L E O V E N
The Wolf 30" (762 mm) single oven has a face trim on all four sides and will overlap stiles and rails. The trim overlaps 3/16" (5 mm) on the bottom, 5/16" (8 mm) on the top and 3/4" (19 mm) on each side.
IMPORTANT NOTE: Wolf recommends using 33" (838 mm) cabinets with the 30" (762 mm) oven. Also, you need a minimum 24" (610 mm) of usable cabinet depth. The bottom cabinet support must be able to support 250 lbs. (113 kg).
Door clearance for the 30" (762 mm) single oven is 20-3/4" (527 mm).
Electrical Requirements
The 30" (762 mm) single oven requires a separate, grounded 4-wire
240 V, 30 amp service with its own circuit breaker. It is provided with a 4'
(1.2 m) flexible 4-wire conduit, which can make a connection at a junction box. The electric rating is 5.1 Kw at
240 V and 3.8 Kw at 208 V with a minimum 30 amp service.
The electrical outlet must be flush with the back wall to allow for proper installation. The outlet can be placed in an adjacent cabinet as long as it is within reach of the 4' (1.2 m) conduit, and a 2" (51 mm) diameter hole is provided. See illustration for electrical placement. For a 24" (610 mm) depth cabinet application, electrical conduit must be kept to the right (viewed from front of cabinet) for a flush installation.
IMPORTANT NOTE: The Wolf 30"
(762 mm) single oven may be installed below a Wolf electric or gas cooktop. Refer to the illustration for specifics on cut-out dimensions for an undercounter application. You cannot install an oven below a Wolf rangetop.
NOTE: Dimensions in parentheses are in millimeters.
24" min
(610)
RIGHT SIDE
CABINET VIEW
67" max
(1702)
IMPORTANT NOTE: The Wolf 30"
(762 mm) single oven may be installed with a microwave and warming drawer, refer to pages 13-15 for installation specifications.
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
27 3 /
16
"
(691)
28 1 /
2
(724)
"
4"
(102)
5"
(127)
E
Cut-out dimensions and electrical placement for 30" (762 mm) single oven – wall application
NOTE: Dimensions in parentheses are in millimeters.
3 3 / 4 " min
(95)
E
5"
(127)
4"
(102)
ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
36" (914)
STANDARD
27 3 / 16 "
(691)
FLOOR TO
COUNTER
HEIGHT
24" min
(610)
4 3 / 4 " min (121)
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
3 3 / 4 " min (95)
27 3 / 16 "
(691)
4 3 / 4 " min (121)
28 1 / 2 "
(724)
4"
(102)
5"
(127)
E
Cut-out dimensions and electrical placement for 30" (762 mm) single oven – undercounter application
8
W
O L F
B
U I L T
- I
N
O
V E N S
3 6 " ( 9 1 4 m m )
S I N G L E O V E N
The Wolf 36" (914 mm) single oven has a face trim on all four sides and will overlap stiles and rails. The trim overlaps 3/16" (5 mm) on the bottom, 5/16" (8 mm) on the top and 3/4" (19 mm) on each side.
IMPORTANT NOTE: Wolf recommends using 39" (991 mm) cabinets with the 36" (914 mm) oven. Also, you need a minimum 24" (610 mm) of usable cabinet depth. The bottom cabinet support must be able to support 250 lbs. (113 kg).
Door clearance for the 36" (914 mm) single oven is 17-3/4" (451 mm).
IMPORTANT NOTE: The Wolf 36"
(914 mm) single oven may be installed below a Wolf electric or gas cooktop. Refer to the illustration for specifics on cut-out dimensions for an undercounter application. You cannot install an oven below a Wolf rangetop.
NOTE: Dimensions in parentheses are in millimeters.
67" max
(1702)
39"
(991)
RECOMMENDED CABINET WIDTH
36" min (914)
34 1 / 2 "
(876 )
24 1 / 16 "
(611)
4"
(102)
5"
(127)
E
Electrical Requirements
The 36" (914 mm) single oven requires a separate, grounded 4-wire
240 V, 30 amp service with its own circuit breaker. It is provided with a 3'
(.9 m) flexible 4-wire conduit, which can make a connection at a junction box. The electric rating is 5.1 Kw at
240 V and 3.8 Kw at 208 V with a minimum 30 amp service.
The electrical outlet must be flush with the back wall to allow for proper installation. The outlet can be placed in an adjacent cabinet as long as it is within reach of the 3' (.9 m) conduit, and a 2" (51 mm) diameter hole is provided. See illustration for electrical placement. For a 24" (610 mm) depth cabinet application, electrical conduit must be kept to the right
(viewed from front of cabinet) for a flush installation.
24" min
(610)
RIGHT SIDE
CABINET VIEW
Cut-out dimensions and electrical placement for 36" (914 mm) single oven – wall application
NOTE: Dimensions in parentheses are in millimeters.
3 3 /
4
" min
(95)
E
5"
(127)
4"
(102)
ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
36" (914)
24 1 / 16 "
(611)
STANDARD
FLOOR TO
COUNTER
HEIGHT
24" min
(610)
7 3 / 4 " (197) rec
4 3 / 4 " (121) min
39"
(991)
RECOMMENDED CABINET WIDTH
36" min (914)
3 3 / 4 " min (95)
4"
(102)
5"
(127)
E
24 1 / 16 "
(611)
34 1 / 2 "
(876 )
7 3 / 4 " (197) rec
4 3 / 4 " (121) min
Cut-out dimensions and electrical placement for 36" (914 mm) single oven – undercounter application
9
W
O L F
B
U I L T
- I
N
O
V E N S
3 0 " ( 7 6 2 m m )
D O U B L E O V E N
The Wolf 30" (762 mm) double oven has a face trim on all four sides and will overlap stiles and rails. The trim overlaps 3/16" (5 mm) on the bottom, 5/16" (8 mm) on the top and 3/4" (19 mm) on each side.
IMPORTANT NOTE: Wolf recommends using 33" (838 mm) cabinets with the 30" (762 mm) oven. Also, you need a minimum 24" (610 mm) of usable cabinet depth. The bottom cabinet support must be able to support 400 lbs. (181 kg).
Door clearance for the 30" (762 mm) double oven is 20-3/4" (527 mm).
NOTE: Dimensions in parentheses are in millimeters.
24" min
(610)
67" max
(1702)
49 5 / 8 "
(1260)
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
28 1 / 2 "
(724)
4"
(102)
5"
(127)
E
RIGHT SIDE
CABINET VIEW
Electrical Requirements
The 30" (762 mm) double oven requires a separate, grounded 4-wire
240 V, 50 amp service with its own circuit breaker. It is provided with a 5'
(1.5 m) flexible 4-wire conduit, which can make a connection at a junction box. The electric rating is 8.9 Kw at
240 V and 6.7 Kw at 208 V with a minimum 50 amp service.
The electrical outlet must be flush with the back wall to allow for proper installation. The outlet can be placed in an adjacent cabinet as long as it is within reach of the 5' (1.5 m) conduit, and a 2" (51 mm) diameter hole is provided. See illustration for electrical placement. For a 24" (610 mm) depth cabinet application, electrical conduit must be kept to the right (viewed from front of cabinet) for a flush installation.
Cut-out dimensions and electrical placement for 30" (762 mm) double oven
W
O L F
B
U I L T
- I
N
O
V E N S
S I D E B Y S I D E O V E N
I N S T A L L A T I O N
Two 30" (762 mm) Single Ovens
The Wolf single 30" (762 mm) built-in oven may be installed next to another 30" (762 mm) oven. You must allow for a 7-1/2" (191 mm) space between oven cut-outs. Also, it is required that a separate inner wall for each oven be present between ovens. Refer to the illustration below for specifics on cut-out dimensions and electrical placement.
Two 36" (914 mm) Single Ovens
The Wolf single 36" (914 mm) built-in oven may be installed next to another 36" (914 mm) oven. You must allow for a 7-1/2" (191 mm) space between oven cut-outs. Also, it is required that a separate inner wall for each oven be present between ovens. Refer to the illustration below for specifics on cut-out dimensions and electrical placement.
NOTE: Dimensions in parentheses are in millimeters.
3 3 /
4
"
(95) min
E
5"
(127)
4"
(102)
ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
24" min
(610)
27 3 / 16 "
(691)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
4 3 / 4 " min (121)
27 3 /
28 1 / 2 "
(724)
30" OVEN CUT-OUT
16
(691)
"
28 1 / 2 "
(724)
30" OVEN CUT-OUT
4"
(102)
5"
(127)
3 3 / 4 " min (95)
E
27 3 / 16 "
(691)
7
1
/ 2 "
(191)
4"
(102)
5"
(127)
E
4 3 / 4 " min (121)
Cut-out dimensions and electrical placement for two 30" (762 mm) single ovens installed side-by-side
NOTE: Dimensions in parentheses are in millimeters.
E
4"
(102)
3 3 /
24"
(610)
7 3 / 4 " (197) rec
4 3 / 4 " (121) min
4 min
" min (95)
5"
(127)
ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
24 1 /
16
"
(611)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
24 1 / 16 "
(611)
34 1 / 2 "
(876)
36" OVEN CUT-OUT
4"
(102)
5"
(127)
3 3 /
4
" min (95)
E
24 1 / 16 "
(611)
7 1 /
2
"
(191)
34 1 / 2 "
(876)
36" OVEN CUT-OUT
4"
(102)
5"
(127)
E
7
4
3
3 /
/ 4
4 "
" (197) rec
(121) min
Cut-out dimensions and electrical placement for two 36" (914 mm) single ovens installed side-by-side
11
12
W A R M I N G D R A W E R S
Warming drawers have a clear mission in life – to take good care of good food until it’s time for you to eat. Our improved air control helps keep moist foods moist and crisp foods crisp. In addition, Wolf warming drawers are some of the most capacious on the market, so you will have little problem storing items.
There are handy shelves for the inside, plus an optional set of five stainless steel containers that divide the drawer into sections, keeping different dishes warm at the same time.
Warming Drawer Features
• Four optional drawer front
•
•
•
• selections
Hidden electronic controls
Pre-set and variable temperature settings
450 watt heating element
Automatic shut-off
• Full extension, ball bearing drawer glides
• Rack for stacking food
From a design perspective you have four choices for the drawer front.
Electronic controls are hidden regardless of your panel selection. Choose from the classic stainless steel look or the premium finishes of platinum or
carbon stainless steel. Also available is the integrated drawer front, which allows for a custom wood panel
(available Fall 2003). Wolf offers optional decorative handles for the integrated drawer front. Keep in mind, there may be significant changes to the installation procedure if you plan on using the integrated drawer front.
•
•
Optional container set
Optional Wolf decorative handles for integrated drawer front
Moisture selection control
Rack for stacking food
Optional drawer fronts
Hidden electronic controls
Full extension drawer glides
Model WD30
30" (762 mm) Warming Drawer
(stainless steel drawer front shown)
W
O L F
W
A R M I N G
D
R A W E R S
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
The Wolf 30" (762 mm) warming drawer is shipped without any decorative drawer front to the unit. You must order one of three stainless steel drawer fronts (handle included) – classic, platinum or carbon finish or the integrated front (no handle) for a custom wood application.
The following illustrations will give you an idea of the overall size that you need to plan for in your installation, plus offer you the finished cutout dimensions. Note the combination installation of a warming drawer below a 30" (762 mm) oven below a microwave. Cut-out dimensions and electrical placement will remain the same if installed individually.
IMPORTANT NOTE: When installing the warming drawer above an oven, include a 2" (51 mm) platform with a decorative edge, to allow for clearance of overlaps. The platform must be able to support 175 lbs. (79.4 kg).
This platform must be a minimum of
1" (25 mm) above the kickplate to allow for the 1/2" (13 mm) overlap of the warming drawer trim.
Electrical Requirements
The warming drawer requires a separate, grounded 120 V, 60 Hz power supply. The service should have its own
15 amp circuit breaker and a grounded
3-prong receptacle should be located within the reach of the 3' (.9 m) power cord, and flush with the back wall.
Please follow the specific space allocated for the electrical service in the following illustrations.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
CENTER LINE OF CABINET
13 1 / 2 "
(343)
13 3 / 4 "
(349)
27 1 /
4
"
(692)
MICROWAVE CUT-OUT
1 1 /
2
"
(38)
(30" CABINET)
E
NOTE: Dimensions in parentheses are in millimeters.
1 1 /
4
"
(32)
16 1 /
2
"
(419)
(30" CABINET)
21" min
(533)
28 1 /
2
"
(724)
30-INCH OVEN CUT-OUT
4"
(102)
5"
(127)
E
4"
(102)
5"
(127)
E
28 1 / 2 "
(724)
WARMING DRAWER CUT-OUT
27 3 / 16 "
(691)
9 1 / 4 " (235)
ALLOW FOR
5 / 8 " OVERLAP
ON ALL SIDES
1 1 /
4
"
(32)
2 3 / 8 "
(60)
24" min
(610)
2" x 2" ANTI-TIP
BLOCK AGAINST
REAR OF CUT-OUT
23 1 /
2
" min
(597)
23"
(584 mm)
29 7 /
8
"
(759 mm)
Installation of a warming drawer below a 30" (762 mm) single oven below a microwave
10 1 /
4
"
(260 mm)
Model WD30
Warming Drawer Overall Dimensions
NOTE: Dimensions in parentheses are in millimeters.
2" x 2" ANTI-TIP
BLOCK AGAINST
REAR OF CUTOUT
23 1 /
2
9
" min
(597)
RIGHT SIDE
CABINET VIEW
1 /
4
"
2 3 /
(235)
8 " (60)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
5
ALLOW FOR
/ 8 " OVERLAP
ON ALL SIDES
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
2 3 / 8 " (60)
9 1 /
4
"
(235)
4"
(102)
5"
(127)
E
28 1 / 2 " (724)
ROUGH
OPENING WIDTH
Cut-out dimensions and electrical placement for warming drawer – undercounter application
13
M I C R O W A V E O V E N S
What sort of microwave oven can you expect from a cooking company?
This is the only microwave that deserves the Wolf name.
It’s fast – 1200 watts on high. Roomy
– a full 2.0 cu. ft. (56 L) and it is a true cooking instrument with a vast range of advanced features including sensor cooking controlled from an interactive display.
The Wolf family resemblance extends beyond function to aesthetic matters as well. The unit is black with optional trim available in all three Wolf stain- less steel finishes – classic, platinum
and carbon.
With the trim in place the microwave oven is identical in width to our 30"
(762 mm) oven so it can be easily mounted above the oven to offer an attractive combination look. Or the microwave oven can be built-in remotely with one of our 30" (762 mm) trim kits, to offer a beautiful look to the kitchen. Such flexibility. Only from Wolf.
Microwave Oven Features
• 1200-watt power
• 2.0 cu. ft. (56 L) capacity
• 16" (406 mm) turntable
• Sensor cooking
• Recipe guide
• Warming feature
• Programmable power options
• Built-in or freestanding
• Three trim options
• Multi-language –
English, French and Spanish
Rating plate Ventilation openings (rear)
Menu label
Oven light
Interactive display
Control panel
One touch door open pad
Oven door with seethrough window
Waveguide cover
W
O L F
M
I C R O W A V E
O
V E N S
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
The Wolf microwave is actually 24"
(610 mm) wide and can be installed as a freestanding unit or built-in. With the trim kit, this microwave can be installed above a 30" (762 mm) single oven.
The illustrations provide the overall size of the unit and installation dimensions. Note the combination installation of a microwave oven above a 30" (762 mm) oven above a warming drawer. Cut-out dimensions and electrical placement will remain the same if installed individually.
The base platform must be able to support 125 lbs. (56.7 kg).
IMPORTANT NOTE: In all instances, where a microwave oven is built-in, you must use one of Wolf's three trim kits to ensure proper ventilation.
IMPORTANT NOTE: When using the
Wolf microwave oven as a freestanding unit, allow 2" (51 mm) of airflow space on top, rear and both sides.
A minimum 21" (533 mm) cabinet depth is required.
The specific location of the outlet is not critical, as long as it is within reach of the 3' (.9 m) power cord.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
IMPORTANT NOTE: The cut-out dimensions shown in the illustration, are based on a 30" (762 mm) cabinet width. For wider cabinets, you should assume that the cut-out is off-center by 1/4" (6 mm) from the right.
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
CENTER LINE OF CABINET
13 1 / 2 "
(343)
13 3 / 4 "
(349)
27 1 /
4
"
(692)
MICROWAVE CUT-OUT
1 1 /
2
"
(38)
(30" CABINET)
E
NOTE: Dimensions in parentheses are in millimeters.
1 1 /
4
"
(32)
16 1 /
2
"
(419)
(30" CABINET)
21" min
(533)
28 1 /
2
"
(724)
30-INCH OVEN CUT-OUT
4"
(102)
5"
(127)
E
5"
4"
(102)
(127)
E
28 1 / 2 "
(724)
WARMING DRAWER CUT-OUT
27 3 / 16 "
(691)
9 1 / 4 " (235)
ALLOW FOR
5 / 8 " OVERLAP
ON ALL SIDES
1 1 /
4
"
(32)
2 3 / 8 "
(60)
24" min
(610)
2" x 2" ANTI-TIP
BLOCK AGAINST
REAR OF CUT-OUT
23 1 /
2
" min
(597)
Electrical Requirements
The Wolf microwave oven requires a separate, grounded 110 / 120 V, 60 Hz power supply. The service should have its own 15 amp circuit breaker and a grounded 3-prong receptacle should be located within the reach of the 3' (.9 m) power cord.
Installation of a microwave oven above a 30" (762 mm) single oven above a warming drawer
NOTE: Dimensions in parentheses are in millimeters.
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
18 3 /
4
"
(476 mm)
19 1 /
8
"
(486 mm)
29 7 /
8
"
(759 mm)
Microwave Oven Overall Dimensions with 30" (762 mm) Trim Kit
21" min
(533)
16 1 / 2 "
(419)
36"
(914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
1 1 /
2
"
(38)
(30" CABINET)
27 1 / 4 " (692)
ROUGH OPENING WIDTH
E
13 1 / 2 "
(343)
13 3 / 4
(349)
"
CENTER LINE OF CABINET
1 1 /
4
"
(32)
(30" CABINET)
RIGHT SIDE
CABINET VIEW
Cut-out dimensions and electrical placement for microwave oven – undercounter application
15
Electric Cooktops
Gas Cooktops
Integrated Cooktops
W O L F C O O K T O P S
How often do you compromise your design because you just do not have the options available to you to meet your clients’ needs when it comes to cooktops? Well, rest assured, Wolf understands your dilemma and we designed a complete set of instruments to help you overcome those obstacles.
Gas, electric or 15" (381 mm) cooktop modules, they are all yours with Wolf. Classic stainless steel is the standard and for some models we offer premium finishes in platinum and carbon stainless steel. And with all of these finely tuned instruments you have control – from the highest searing heat to the merest breath of flame. Heat you can even tailor for the cooking vessel you’re using – from the largest stockpot to the smallest melting pan.
* This appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org.
W
O L F
E
L E C T R I C
C
O O K T O P S
Model CT15E
15" (381 mm) Electric Cooktop
Model CT30E
30" (762 mm) Electric Cooktop
Model CT36E
36" (914 mm) Electric Cooktop
E L E C T R I C C O O K T O P S
Behind the sophisticated, minimalist exterior, beneath that perfectly smooth, subtly patterned glass that cleverly reduces scratches, there is a high-performance cooking tool.
The black ceramic glass top is beautifully complemented by the classic stainless steel trim finish and for the 30" (762 mm) and 36" (914 mm) cooktops you can choose the premium finishes of platinum or carbon stainless steel. CT15E/S is not available in the premium finishes.
Multiple cooking elements with different zones allow your customer a variety of different applications. The
36" (914 mm) cooktop contains a 12"
(305 mm) diameter triple heating element – concentric rings that give you exceptional control of temperature for pans and pots of every size.
All of the heating elements offer True
Simmer and with each cooktop there is one element that enables you to set a temperature for melting.
Touch controls
SIM
OFF
ON
HIG
H
SIM
HIG
H
OFF
ON
O
OFF
Simmer setting on both elements
Universal off and lock keys
Melt feature
Model CT15E
Double Element – 2,200 W (both rings) / 750 W (inner ring)
Single Element – 1,200 W
Touch controls
Universal off and lock keys
SIM
OFF ON
ZONE 2
HIGH
SIM
OFF
ON
ZON
E 2
HIG
H
SIM
OFF ON
HIGH
SIM
OFF ON
O
OFF
HIGH
Melt feature
Simmer setting on all elements
Model CT30E
Double Elements – 2,200 W (both rings) / 750 W (inner ring) and 1,900 W (both rings) / 950 W (inner ring)
Single Elements – 1,500 W and 1,200 W
Electric Cooktop Features
• Touch controls
• Lock key
• Universal off
• Graduated control lighting
• Single touch command
• Simmer setting on all elements
• Melt setting on one element
• Hot surface indicators on all elements
• Certified by Star-K to meet religious regulations
Touch controls
Universal off and lock keys
SIM
OFF
ON
HIG
H
SIM
SIM
OFF
ON
ZON
E 2
HIG
H
SIM
OFF ON
HIGH
SIM
OFF ON
HIG
H
ZON
E 2
OFF ON
O
HIGH
OFF
Melt feature
Simmer setting on all elements
Model CT36E
Triple Element – 2,700 W (all three rings) / 2,200 W
(inner two rings) / 1,050 W (inner ring)
Double Element – 2,200 W (both rings) / 750 W (inner ring)
Single Elements – 1,800 W, 1,500 W and 1,200 W
17
W
O L F
E
L E C T R I C
C
O O K T O P S
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
From a planning perspective, your selection process is made easier by the three different sizes you have to choose from. The 30" (762 mm) and
36" (914 mm) electric cooktops are available in three trim finishes – classic, platinum and carbon stainless steel. The 15" (381 mm) cooktop is available with classic stainless steel trim only.
Space Requirements
The illustrations of the three different size cooktops give you overall dimensions, while the finished cut-out dimensions you need to incorporate into your plans are shown in the illustrations on the following pages.
A Wolf single 30" (762 mm) or 36"
(914 mm) built-in oven may be installed below these cooktops. Refer to the illustrations on the following pages for specifics on cut-out dimensions and placement of electrical. Also refer to the respective oven sizes and be aware of the depth of the cooktop when planning for this installation.
IMPORTANT NOTE: Wolf electric cooktops are designed and agency approved for use with Wolf built-in ovens only. The cooktop nominal width must match the built-in oven nominal width.
IMPORTANT NOTE: A Wolf ventilation system is recommended. When installing a ventilation hood, refer to the specific requirements of the hood for the minimum dimension to cooking surface.
These cooktops can accommodate the Wolf downdraft system, a Wolf chimney or Pro Series ventilation hood. Refer to pages 46-61 for ventilation specifics.
Electrical Requirements
IMPORTANT NOTE: When an oven is installed below the cooktop, the electrical conduit should run through the adjacent base cabinet within the shaded area shown in the illustrations on the following pages. The top right area in the oven cavity is available, but will make installation difficult.
The bottom cabinet support must be able to support 250 lbs. (113 kg).
When an electric cooktop is installed above cabinets, the electrical placement is not critical.
3 1 /
2
"
(89 mm)
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
3 1 /
2
"
(89 mm)
15"
(381 mm)
30"
(762 mm)
21"
(533 mm)
SIM
OFF ON
ZONE 2
HIGH
SIM
OFF
ON
O
HIG
H
OFF
15" (381 mm) Electric Cooktop
Model CT15E
21"
(533 mm)
SIM
ON
OFF E 2
ZON
HIG
H
SIM
OFF O
N
E 2
ZON
HIG
H
SIM
O
OFF
ON
OFF
HIG
H
HIGH
SIM
OFF ON
3 1 /
2
"
(89 mm)
30" (762 mm) Electric Cooktop
Model CT30E
36"
(914 mm)
21"
(533 mm)
SIM
ON
OFF E 2
ZON
HIG
H
SIM
SIM
SIM
OFF
ON
HIG
H
SIM
ON
OFF
HIG H
ZON
E 2
OFF
HIG H
ON
O
OFF
ON
HIG
H
OFF
36" (914 mm) Electric Cooktop
Model CT36E
18
W
O L F
E
L E C T R I C
C
O O K T O P S
1 5 " ( 3 8 1 m m )
E L E C T R I C C O O K T O P
IMPORTANT NOTE: If the 15" (381 mm) cooktop is to be used with any combination of additional cooktop units or modules with a filler strip, the cut-out width increases to 14"
(356 mm).
IMPORTANT NOTE: When multiple
15" (381 mm) modules are installed side-by-side refer to the countertop cut-out dimensions on page 25.
The Wolf 15" (381 mm) electric cooktop requires a separate, grounded 4-wire 240 V, 15 amp service with its own circuit breaker. It has a 4' (1.2 m) flexible 3-wire conduit that can make a connection at a junction box.
At 240 V this cooktop is rated at 3.4
Kw and at 208 V rated at 2.6 Kw with a minimum 15 amp service.
NOTE: Dimensions in parentheses are in millimeters.
13"
(330)
19
1
/ 4 " (489)
COOKTOP CUT-OUT
DEPTH
2 1 / 2 " min
TO COOKING
SURFACE
(64)
24" OR 30"*
(610 or 762) 18"
(457)
2"
(51)
36"
(914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
30"
(762)
33" (838)
RECOMMENDED
CABINET WIDTH
13 3 / 8 " (340)
CUT-OUT
WIDTH
4" (102)
E
15"
(381)
15"
(381)
RIGHT SIDE
CABINET VIEW
2"
(51)
18"
(457)
NOTE: Application shown allows for installation of two 15" (381 mm) modules side-by-side.
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
Cut-out dimensions and electrical placement for 15" (381 mm) electric cooktop, no oven or downdraft.
3 0 " ( 7 6 2 m m )
E L E C T R I C C O O K T O P
IMPORTANT NOTE: Wolf recommends using 33" (838 mm) cabinets with the 30" (762 mm) cooktop.
IMPORTANT NOTE: If the 30" (762 mm) cooktop is to be used with any combination of additional cooktop units or modules with a filler strip, the cut-out width increases to 29"
(737 mm).
The Wolf 30" (762 mm) electric cooktop requires a separate, grounded 3-wire 240 V, 40 amp service with its own circuit breaker. It has a 4' (1.2 m) flexible 3-wire conduit that can make a connection at a junction box.
At 240 V this cooktop is rated at 6.8
Kw and at 208 V rated at 5.2 Kw with a minimum 30 amp service.
NOTE: Dimensions in parentheses are in millimeters.
13"
(330)
19 1 / 4 " (489)
COOKTOP CUT-OUT
DEPTH
4"
(102)
E 3 1 / 2 " (89)
10"
(254) ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
24" min
(610)
2 1 /
2
" min
TO COOKING
SURFACE
(64)
24" OR 30"*
(610 or 762) 18"
(457)
2"
(51)
36"
(914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
30"
(762)
33" (838)
RECOMMENDED
CABINET WIDTH
28
3
/ 8 " (721)
COOKTOP CUT-OUT WIDTH
4" (102)
3 1 / 2 " (89)
3 3 / 4 " min
(95)
10"
(254)
E
30" OVEN CUT-OUT LOCATION
4 3 / 4 " min
(121)
2"
(51)
18"
(457)
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
Cut-out dimensions and electrical placement for 30" (762 mm) electric cooktop above 30"
(762 mm) single oven.
19
W
O L F
E
L E C T R I C
C
O O K T O P S
3 6 " ( 9 1 4 m m )
E L E C T R I C C O O K T O P
IMPORTANT NOTE: Wolf recommends using 39" (991 mm) cabinets with the 36" (914 mm) cooktop.
IMPORTANT NOTE: If the 36" (914 mm) cooktop is to be used with any combination of additional cooktop units or modules with a filler strip, the cut-out width increases to 35"
(889 mm).
NOTE: Dimensions in parentheses are in millimeters.
36"
(914)
13"
(330)
19 1 / 4 " (489)
COOKTOP CUT-OUT
DEPTH
24" OR 30"*
(610 or 762)
2 1 / 2 " min
TO COOKING
SURFACE
(64)
18"
(457)
2"
(51)
39" (991)
RECOMMENDED CABINET WIDTH
34
3
/ 8 " (873)
COOKTOP CUT-OUT WIDTH
The Wolf 36" (914 mm) electric cooktop requires a separate, grounded 3-wire 240 V, 50 amp service with its own circuit breaker. It is provided with a 4' (1.2 m) flexible
3-wire conduit that can make a connection at a junction box.
At 240 V this cooktop is rated at 9.4
Kw and at 208 V rated at 7.1 Kw with a minimum 40 amp service.
4"
(102)
E 3 1 / 2 " (89)
10"
(254) ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
24" min
(610)
4 3 /
4
"
(121) min
7
3
/ 4 " (197) rec
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
3 3 /
4
" min
(95)
4" (102)
3 1 / 2 " (89) E
10"
(254)
36" OVEN CUT-OUT LOCATION
4 3 /
4
"
(121) minimum
7
3
/ 4 " (197) recommended
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
When a 36" (914 mm) oven is installed below a cooktop, it is recommended that an additional 3"
(76 mm) be added to the cabinet base to ease the use of controls and oven door.
2"
(51)
18"
(457)
Cut-out dimensions and electrical placement for 36" (914 mm) electric cooktop above 36"
(914 mm) single oven
20
W
O L F
G
A S
C
O O K T O P S
Model CT15G
15" (381 mm) Gas Cooktop
Model CT30G
30" (762 mm) Gas Cooktop
Model CT36G
36" (914 mm) Gas Cooktop
G A S C O O K T O P S
New features make cooking a greater pleasure than ever. For instance, at higher settings the patented Dual
Stacked Burner design uses its upperlevel burner for maximum heat transfer.
Merely turn down the illuminated knob and the lower-tier burners delivers finetuning control and True Simmer. You’ll see why we patented this concept when you can have the slightest of flame and enjoy a simmer with no boiling or scorching.
All gas cooktops are available in the classic stainless steel finish and for the
30" (762 mm) and 36" (914 mm) cooktops you can choose the premium platinum stainless steel finish. CT15G/S is not available in platinum.
The sealed burners and deep recess of the seamless draw pan area make clean up of any of those previously unsightly spills a snap.
Dual stacked burners
Low profile continuous grates
Lighted control area
Deep draw pan
Model CT15G – Large Burner at 12,000 Btu/hr (3.5 kWh) with 700 Btu/hr (.2 kWh) delivered at simmer
Small Burner at 9,200 Btu/hr (2.7 kWh) with 300 Btu/hr (.1 kWh) delivered at simmer
Dual stacked burners
Low Profile continuous grates
Lighted
Control area
Gas Cooktop Features
• Dual stacked burners
• True simmer on all burners
• Lighted control area
• Sealed burners
• Individual spark ignition system
• Low profile continuous grates
• Deep seamless draw pan
• Optional wok grate – 30" (762 mm) and 36" (914 mm) cooktops
• Optional griddle – 30" (762 mm) and 36" (914 mm) cooktops
• High altitude kit available
• Certified by Star-K to meet religious regulations
Deep draw pan
Model CT30G – 2 Large Burners at 12,000 Btu/hr (3.5 kWh) with 700 Btu/hr (.2 kWh) delivered at simmer
2 Small Burners at 9,200 Btu/hr (2.7 kWh) with 300 Btu/hr (.1 kWh) delivered at simmer
Low profile continuous grates
Dual stacked burners
Deep draw pan
Lighted control area
Model CT36G – 2 Large Burners at 12,000 Btu/hr (3.5 kWh) with 700 Btu/hr (.2 kWh) delivered at simmer
3 Small Burners at 9,200 Btu/hr (2.7 kWh) with 300 Btu/hr (.1 kWh) delivered at simmer
21
W
O L F
G
A S
C
O O K T O P S
P L A N N I N G A N D D E S I G N
I N F O R M A T I O N
As with the electric cooktops, you have three sizes to choose from to address your clients' needs. The 30"
(762 mm) and 36" (914 mm) cooktops are available in classic and platinum stainless steel finish. The 15"
(381 mm) cooktop comes in classic stainless steel only.
Space Requirements
The illustrations of the three different size cooktops give you overall dimensions, while the finished cut-out dimensions you need to incorporate into your plans are shown in the illustrations on the following pages.
IMPORTANT NOTE: Wolf gas cooktops are designed and agency approved for use with Wolf built-in ovens only. The cooktop nominal width must match the built-in oven nominal width.
IMPORTANT NOTE: When installing a ventilation hood, refer to the specific requirements of the hood for the minimum dimension to cooking surface.
These cooktops can accommodate the Wolf downdraft system, a Wolf chimney or Pro Series ventilation hood. Refer to pages 46-61 for ventilation specifics.
The electric ignition system is a safe, convenient and reliable manner to provide ignition for the burners.
However, you need to make provisions for a separate 120 V, 60 Hz power supply. The service should have its own 15 amp circuit breaker and a grounded 3-prong receptacle should be located within the reach of the 6' (1.8 m) power cord. Refer to the illustrations on the following pages.
4"
(102 mm)
Wolf gas cooktops using natural gas function up to an altitude of 8,000'
(2438 m) without any adjustment.
Natural gas installations from 8,000'
(2438 m) to 10,000' (3048 m) need the High Altitude Kit. Contact your
Wolf dealer for details. LP gas installations will operate up to 10,000'
(3048 m) without adjustment.
4"
(102 mm)
You must follow all National
Electrical Code and gas regulations.
In addition, be aware of local codes and ordinances when installing your services.
15"
(381 mm)
15" (381 mm) Gas Cooktop
Model CT15G
30"
(762 mm)
21"
(533 mm)
30" (762 mm) Gas Cooktop
Model CT30G
21"
(533 mm)
36"
(914 mm)
21"
(533 mm)
4"
(102 mm)
Electrical and Gas Requirements
Wolf gas cooktops are designed to operate on natural gas at 5" (127 mm) WC (water column) pressure or
LP gas at 10" (254 mm) WC pressure.
They are supplied with a 1/2" (13 mm) NPT male gas connection at the right rear corner on the bottom of the cooktop. The male connector exits the unit straight down and you are supplied with a regulator with two female connectors.
22
36" (914 mm) Gas Cooktop
Model CT36G
W
O L F
G
A S
C
O O K T O P S
1 5 " ( 3 8 1 m m ) G A S
C O O K T O P
For the 15" (381 mm) gas cooktop, the gas service may be supplied through the floor, if the cooktop is not installed above an oven. Refer to the illustration for specifics on cut-out dimensions and placement of gas and electrical.
IMPORTANT NOTE: When multiple
15" (381 mm) cooktop modules are installed side-by-side refer to the countertop cut-out dimensions on page 25.
NOTE: Dimensions in parentheses are in millimeters.
13"
(330)
19 1 / 4 " (489)
COOKTOP CUT-OUT
DEPTH
24"
OR
30"*
(610 or 762)
2 1 / 2 " min
TO COOKING
SURFACE
(64)
18"
(457)
7"
(178)
30"
(762)
33" (838)
RECOMMENDED
CABINET WIDTH
14" (356)
CUT-OUT
WIDTH
4"
(102)
7"
(178)
18"
(457)
3 0 " ( 7 6 2 m m ) G A S
C O O K T O P
A Wolf 30" (762 mm) single oven may be installed below the 30" (762 mm) gas cooktop. Refer to the illustration for specifics on cut-out dimensions and placement of gas and electrical. Also be aware of the depth of the cooktop when planning for this installation.
IMPORTANT NOTE: Wolf recommends using 33" (838 mm) cabinets with the 30" (762 mm) cooktop.
When a gas cooktop is installed above cabinets, the gas and electrical placement is not critical. A grounded outlet needs to be placed within 4' (1.2 m) of the right rear of the cooktop.
IMPORTANT NOTE: When an oven is installed below the cooktop, the gas and electrical conduit should run through the adjacent base cabinet within the shaded area shown in the illustration. The top right area in the oven cavity is available, but will make installation difficult. The bottom cabinet support must be able to support 250 lbs. (113 kg).
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
E G
15"
(381)
LOCATION OF GAS
SUPPLY MAY ALSO
EXTEND 5" ON FLOOR
FROM BACK WALL
5"
(127)
15"
(381)
LOCATION OF GAS SUPPLY
MAY ALSO EXTEND 5" ON
FLOOR FROM BACK WALL
15"
(381)
NOTE: Application shown allows for installation of two 15" (381 mm) modules side-by-side.
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
Cut-out dimensions, electrical and gas placement for 15" (381 mm) gas cooktop, no oven or downdraft
NOTE: Dimensions in parentheses are in millimeters.
13"
(330)
19
1
/ 4 " (489)
COOKTOP CUT-OUT
DEPTH
4"
(102)
G E 3 1 / 2 " (89)
10"
(254) ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
24" min
(610)
2 1 / 2 " min
TO COOKING
SURFACE
(64)
24" OR 30"*
(610 or 762)
18"
(457)
9"
(229)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
30"
(762)
33" (838)
RECOMMENDED
CABINET WIDTH
30" min (762)
29" (737)
COOKTOP CUT-OUT WIDTH
4" (102)
3
1
/ 2 " (89) G
3 1 /
2
" min
(89)
10"
(254)
E
30" OVEN CUT-OUT LOCATION
4 3 / 4 " min
(121)
9"
(229)
18"
(457)
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
Cut-out dimensions, electrical and gas placement for 30" (762 mm) gas cooktop above 30"
(762 mm) single oven
23
W
O L F
G
A S
C
O O K T O P S
3 6 " ( 9 1 4 m m ) G A S
C O O K T O P
A Wolf 36" (914 mm) single oven may be installed below the 36" (914 mm) cooktop. Refer to the illustration for specifics on cut-out dimensions and placement of gas and electrical.
Also be aware of the depth of the cooktop when planning for this installation.
IMPORTANT NOTE: Wolf recommends using 39" (991 mm) cabinets with the 36" (914 mm) cooktop.
4"
(102)
When a gas cooktop is installed above cabinets, the gas and electrical placement is not critical. A grounded outlet needs to be placed within 4'
(1.2 m) of the right rear of the cooktop.
IMPORTANT NOTE: When an oven is installed below the cooktop, the gas and electrical conduit should run through the adjacent base cabinet within the shaded area shown in the illustration. The top right area in the oven cavity is available, but will make installation difficult. The bottom cabinet support must be able to support 250 lbs. (113 kg).
When a 36" (914 mm) oven is installed below a cooktop, it is recommended that an additional 3"
(76 mm) be added to the cabinet base to ease the use of controls and oven door.
13"
(330)
NOTE: Dimensions in parentheses are in millimeters.
19
1
/ 4 " (489)
COOKTOP CUT-OUT
DEPTH
E G 3 1 / 2 " (89)
10"
(254) ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
24" min
(610)
7 3 / 4 " (197) rec
4 3 / 4 " (121) min
2 1 / 2 " min
TO COOKING
SURFACE
(64)
24" OR 30"*
(610 or 762)
18"
(457)
9"
(229)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
36"
(914)
39" (991)
RECOMMENDED CABINET WIDTH
36" min (914)
35"
(889)
COOKTOP CUT-OUT WIDTH
3 1 /
2
" min
(89)
4" (102)
3 1 / 2 " (89) E
10"
(254)
G
36" OVEN CUT-OUT LOCATION
7 3 / 4 " (197) rec
4 3 / 4 " (121) min
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
9"
(229)
18"
(457)
Cut-out dimensions, electrical and gas placement for 36" (914 mm) gas cooktop above 36"
(914 mm) single oven
24
W
O L F
I
N T E G R A T E D
C
O O K T O P S
Model IM15
Gas Multi-function Cooktop
Model IG15
Electric Grill Cooktop
I N T E G R A T E D C O O K T O P S
With Wolf's integrated cooktops, you have the ultimate in customization.
You can create your own design by mixing and matching the various components within this system. And when you couple these modules with some of the other cooktops within the Wolf inventory you and your client will truly understand freedom of choice.
These modules integrate perfectly with their larger counterparts, right down to their low-profile grates, dual stacked gas burners, deep spill pan and illuminated controls. The twoelement electric and dual stacked burner gas modules deliver the same performance and appearance as the larger electric and gas cooktops.
The integrated cooktops can be installed together or with 30" (762 mm) or 36" (914 mm) cooktops.
When multiple units are installed sideby-side, you add the cut-out dimensions together and 1-1/4" (32 mm) additional space for each additional unit, to give you your total cut-out width. Refer to the illustration.
IMPORTANT NOTE: Where multiple units are installed side-by-side, each unit must have its own separate recommended electrical circuit. When multiple gas units are installed next to one another, they can receive their gas supply from a common line.
However, each unit MUST have its own regulator installed between the mainline and the integrated cooktop.
Model IS15
Electric Steamer Cooktop
Model IF15
Electric Fryer Cooktop
59 3 / 4 " (1518) FOUR MODULES CUT-OUT WIDTH
(OR 30" COOKTOP AND TWO MODULES)
44 1 / 2 " (1130) THREE MODULES WIDTH
(OR 30" COOKTOP AND ONE MODULE)
29 1 / 4 " (743)
TWO MODULES WIDTH
2 1 / 2 " min
(64)
14"
(356)
CUT-OUT
WIDTH
19 1 / 4 "
(489)
CUT-OUT
DEPTH
FRONT OF COUNTERTOP NOTE: Dimensions in parentheses are in millimeters.
* This appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org.
Countertop cut-out dimensions for multiple cooktop installation
25
W
O L F
I
N T E G R A T E D
C
O O K T O P S
G A S M U L T I - F U N C T I O N
C O O K T O P
It’s really a misnomer to describe this wonderful cooktop as a wok instrument because it is much more than that. With two grates, the wok grate will handle your wok perfectly, while the low-profile grate will accommodate even your largest stockpots.
For true wok cooking, the burner sculpts the gas flame into a plume, focusing heat in the center of the wok, then dispersing it outward for precisely controlled cooking. The powerful burner that exceeds 18,000
Btu/hr (5.3 kWh), boils water much faster than many other product on the market.
The Wolf multi-function cooktop is available in classic stainless steel.
Multi-Function Cooktop Features:
• Classic stainless steel finish
• High-output burner
• Two grates – wok and low profile
• Illuminated controls
• Sealed burner
• Single spark ignition system
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
The illustrations below provide the overall size of the cooktop and finished cut-out dimensions.
IMPORTANT NOTE: When multiple
15" (381 mm) modules are installed side-by-side refer to the countertop cut-out dimensions on page 25.
This cooktop can accommodate a
Wolf chimney hood, downdraft or Pro
Series ventilation hood. Refer to pages 46-61 for Wolf ventilation specifics and recommendations.
Electrical and Gas Requirements
The multi-function cooktop is designed to operate on natural gas at
5" WC (water column) pressure or LP gas at 10" (254 mm) WC pressure. It is supplied with a 1/2" (13 mm) NPT female gas connection at the right rear corner.
The electric ignition system is a safe, convenient and reliable manner to provide ignition for the burner. The
Wolf multi-function cooktop requires a separate 120 V, 60 Hz power supply.
The service should have its own 15 amp circuit breaker, and a grounded
3-prong receptacle should be located within the reach of the 6' (1.8 m) power cord.
The gas service may be supplied through the floor or within the shaded area shown in the illustration.
The Wolf gas multi-function cooktop functions up to 8,000' (2438 m) in altitude without any adjustment. If installation is above 8,000' (2438 m), contact your Wolf dealer.
You must follow all National Electrical
Code and gas regulations. In addition, be aware of local codes and ordinances when installing your services.
NOTE: Dimensions in parentheses are in millimeters.
5"
(127 mm)
Model IM15
Multi-function Cooktop Overall Dimensions
26
15"
(381 mm)
21"
(533 mm)
30"
(762)
13"
(330)
19 1 /
4
"
(489)
COOKTOP CUT-OUT
DEPTH
2 1 / 2 " min
TO COOKING
SURFACE
(64)
24" OR 30"*
(610 or 762)
18"
(457)
7"
(178)
33" (838)
RECOMMENDED
CABINET WIDTH
14" (356)
CUT-OUT
WIDTH
5"
(127)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
E G
15"
(381)
LOCATION OF GAS
SUPPLY MAY ALSO
EXTEND 5" ON FLOOR
FROM BACK WALL
5"
(127)
15"
(381)
LOCATION OF GAS SUPPLY
MAY ALSO EXTEND 5" ON
FLOOR FROM BACK WALL
NOTE: Application shown allows for installation of two 15" (381 mm) modules side-by-side.
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
7"
(178)
18"
(457)
Cut-out dimensions, gas and electrical placement for gas multi-function cooktop
W
O L F
I
N T E G R A T E D
C
O O K T O P S
E L E C T R I C G R I L L
C O O K T O P
Who says you have to sacrifice the fun of grilling when the weather changes and you cannot take advantage of the outdoors? With this grill cooktop you can easily handle steaks and all sorts of food without the hassle of lava rocks or briquettes.
There are two individual heating elements – front and back – on this module that enables you to cook on one side while keeping other items at serving temperature.
For ease of cleaning, there are dishwasher safe porcelainized plates below two 1,400 watt heating elements that accumulate any unwanted grease and drain it away.
Grill Cooktop Features:
• Classic stainless steel finish
• Two individually controlled
1,400 watt elements
• Porcelain collection plate
• Illuminated controls
• One piece grilling grid
• Low profile grilling surface
• Timer
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
The Wolf grill cooktop is available in classic stainless steel.
The illustrations below provide the overall size that you need to plan for in your installation and the finished cut-out dimensions.
This cooktop can accommodate a
Wolf chimney hood, downdraft or Pro
Series ventilation hood. Refer to pages 46-61 for Wolf ventilation specifics and recommendations.
IMPORTANT NOTE: When multiple
15" (381 mm) modules are installed side-by-side refer to the countertop cut-out dimensions on page 25.
Electrical Requirements
The Wolf grill cooktop requires a separate, grounded 4-wire 240 V, 15 amp service with its own circuit breaker. The unit is provided with a 4'
(1.2 m) flexible 3-wire conduit that makes a connection to a junction box. At 240 V this cooktop is rated at
2.8 Kw.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
NOTE: Dimensions in parentheses are in millimeters.
6 1 /
4
"
(159 mm)
15"
(381 mm)
21"
(533 mm)
Model IG15
Grill Cooktop Overall Dimensions
30"
(762)
13"
(330)
19 1 / 4 " (489)
COOKTOP CUT-OUT
DEPTH
2 1 / 2 " min
(64)
24" OR 30"*
(610 or 762)
TO COOKING
SURFACE
18"
(457)
7"
(178)
33" (838)
RECOMMENDED
CABINET WIDTH
14" (356)
CUT-OUT
WIDTH
6 1 / 4 "
(159)
36"
(914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
E
15"
(381)
15"
(381)
RIGHT SIDE
CABINET VIEW
NOTE: Application shown allows for installation of two 15" (381 mm) modules side-by-side.
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
Cut-out dimensions and electrical placement for electric grill cooktop
7"
(178)
18"
(457)
27
W
O L F
I
N T E G R A T E D
C
O O K T O P S
E L E C T R I C S T E A M E R
C O O K T O P
From a temperature of 150˚F (66˚C) to boil, you can keep food hot for long periods of time or defrost easily without drying out or losing its flavor.
The beauty of this cooktop module is accented by the sculptured glass domed lid, which is easily inverted for storage to keep a low profile.
The deep, large vessel with a two gallon (7.6 L) capacity can be used to cook up to 16 cups of pasta. Included is a solid and perforated insert pan.
The Wolf steamer cooktop is available in classic stainless steel.
Steamer Cooktop Features:
• Classic stainless steel finish
• Large two gallon (7.6 L) capacity
• Hidden 2,600 watt heating element
• Automatic drain
• Domed glass lid
• Two insert pans – one solid and one perforated
• Illuminated controls
• Timer
• Pre-heat indicator
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
The illustrations below provide the overall size of the cooktop and finished cut-out dimensions.
IMPORTANT NOTE: The steamer cooktop must be installed with a drain connection. In order to accommodate this, you must provide for a door in the base cabinet for access to the drain connection.
Drain Connection
The outlet from the valve is 5/8" (16 mm) which will accept a drain hose that must flow downward to and tie into an existing sink drain. Another option would be to plumb a separate drain with a freefall. Refer to the illustration below. Following local building codes, your plumber will dictate how to plumb the unit.
For a third option, the consumer must supply a heat resistant bucket in the location of the drain outlet.
NOTE: Dimensions in parentheses are in millimeters.
13 1 /
2
"
(343 mm)
15"
(381 mm)
21"
(533 mm)
28
Model IS15
Steamer Cooktop Overall Dimensions
This cooktop can accommodate a
Wolf chimney or Pro Series ventilation hood. Refer to pages 46-61 for Wolf ventilation specifics and recommendations.
IMPORTANT NOTE: When multiple
15" (381 mm) modules are installed side-by-side refer to the countertop cut-out dimensions on page 25.
Electrical Requirements
The Wolf steamer cooktop requires a separate, grounded 3-wire 240 V, 15 amp service with its own circuit breaker. The unit is provided with a 4'
(1.2 m) flexible 4-wire conduit that makes a connection to a junction box. At 240 V this cooktop is rated at
2.6 Kw.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
30"
(762)
13"
(330)
19 1 / 4 " (489)
COOKTOP CUT-OUT
DEPTH
2 1 / 2 " min
(64)
24" OR 30"*
(610 or 762)
TO COOKING
SURFACE
18"
(457)
7"
(178)
33" (838)
RECOMMENDED
CABINET WIDTH
14" (356)
CUT-OUT
WIDTH
12 3 /
8
(314)
"
7 5 /
8
"
(194)
DRAIN OUTLET
LOCATION
12 3 / 8 "
(314)
6"
(152)
13 1 / 2 "
(343)
DRAIN OUTLET
LOCATION
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT E
15"
(381)
RIGHT SIDE
CABINET VIEW 15"
(381)
NOTE: Application shown allows for installation of two 15" (381 mm) modules side-by-side.
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
Cut-out dimensions and electrical placement for electric steamer cooktop.
7"
(178)
18"
(457)
W
O L F
I
N T E G R A T E D
C
O O K T O P S
E L E C T R I C F R Y E R
C O O K T O P
To round out your options for the ideal kitchen, you must have a fryer to choose from and Wolf offers a great option that the market has never seen. Dinner specialties that you never tried before will be at your fingertips when your client uses this module.
The accurate temperature control will enable your customer to seal in that great flavor of the food without absorbing any unnecessary grease. In addition the extremely deep fryer will enable you to handle large portions of small items or a whole chicken.
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
The Wolf fryer cooktop is available in classic stainless steel. In addition, there is a metal storage lid to keep the grease area free from particles falling into the fryer.
The illustrations below provide the overall size that you need to plan for in your installation and the finished cut-out dimensions.
IMPORTANT NOTE: The fryer cooktop must be installed in a base cabinet with access to the bottom of the unit to drain the oil.
The consumer must supply a heat resistant bucket to accept the oil.
Refer to the illustration below for location of the drain outlet.
This cooktop can accommodate a
Wolf chimney or Pro Series ventilation hood. Refer to pages 46-61 for Wolf ventilation specifics and recommendations.
IMPORTANT NOTE: When multiple
15" (381 mm) modules are installed side-by-side refer to the countertop cut-out dimensions on page 25.
Electrical Requirements
The Wolf fryer cooktop requires a separate, grounded 4-wire 240 V, 15 amp service with its own circuit breaker. The unit is provided with a 4'
(1.2 m) flexible 3-wire conduit that makes a connection to a junction box. At 240 V this cooktop is rated at
2.6 Kw.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
Fryer Cooktop Features:
• Classic stainless steel finish
• Large 1-1/4 gallon (3.8 L) capacity
• Hidden 2,600 watt heating element
• Three basket design
• Manual drain
• Metal storage lid
• Illuminated controls
• Timer
• Melt feature
• Pre-heat indicator and cool zone
13 1 /
2
"
(343 mm)
15"
(381 mm)
21"
(533 mm)
Model IF15
Fryer Cooktop Overall Dimensions
NOTE: Dimensions in parentheses are in millimeters.
30"
(762)
13"
(330)
19 1 / 4 " (489)
COOKTOP CUT-OUT
DEPTH
2 1 /
2
" min
TO COOKING
SURFACE
(64)
24" OR 30"*
(610 or 762)
18"
(457)
7"
(178)
33"
(838)
RECOMMENDED
CABINET WIDTH
14"
(356)
CUT-OUT
WIDTH
12 3 / 8 "
(314)
7 5 / 8 "
(194)
DRAIN OUTLET
LOCATION
36"
(914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
DRAIN OUTLET
LOCATION
12 3 / 8 "
(314)
6"
(152)
13 1 / 2 "
(343)
E
15"
(381)
RIGHT SIDE
CABINET VIEW
15"
(381)
NOTE: Application shown allows for installation of two 15" (381 mm) modules side-by-side.
* Minimum 24" (610 mm) from protected cabinet or 30" (762 mm) from unprotected cabinet to cooking surface.
Cut-out dimensions and electrical placement for electric fryer cooktop.
7"
(178)
18"
(457)
29
30
DF304 DF486C
DF366 DF486G
DF364C DF484CG
DF364G DF484DC
DF484DG
DF484F
DF606DC
DF606DG
DF606F
DF606CG
DF604CF
DF604GF
W O L F D U A L F U E L
R A N G E S
It's hard to put into a few words the differences you will see in Wolf compared to the other cooking appliances. Some of the differences are dramatic and some are very subtle.
Suffice to say that you and your clients will notice the differences.
Wolf dual fuel ranges come in 30"
(762 mm), 36 (914 mm), 48" (1219 mm) and 60" (1524 mm) widths, and combined with the range top options, the different configurations you can choose from are numerous.
Model numbers indicate the range top features; (C) charbroiler, (G) griddle, (DC) double charbroiler,
(DG) double griddle and (F) French top.
The electric oven(s) feature the Wolf exclusive dual convection system that delivers even temperature and airflow throughout. Its two convection fans and four heating elements give the user convenience and superior control over eight different cooking modes. These modes include bake, roast, broil, convection bake, convection roast, convection broil, convection and bake stone (with bake stone accessory).
Advanced standard features such as dual stacked burners, dual convection
fans, blue porcelain oven interior, pivoting control panel, steel griddle
plate, infrared charbroiler and French
top are all yours for the asking. The freedom to customize your dual fuel range will make you and your client look great.
* This appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org.
W
O L F
D
U A L
F
U E L
R
A N G E S
F E A T U R E S
• Natural or LP gas range top with dual convection electric oven(s)
• 18" (457 mm) oven on 48" (1219 mm) range is single convection
• Control knobs can be ordered in red or black
• Stainless steel exterior finish
• Platinum bezels surround all knobs, chrome, brass and copper optional
• Dual-stacked sealed 9,200 Btu/hr
(2.7 kWh) and 15,000 Btu/hr
(4.4 kWh) burners with automatic re-ignition at all settings
• Melt feature on one 9,200 Btu/hr
(2.7 kWh) burner
• Continuous cast iron porcelain top grates
• Pivoting hidden touch control panel
• Patent-pending coaxial temperature displaying oven selector knob
• Eight cooking modes
• Proof mode for 18" (457 mm) oven on 48" (1219 mm) range
• Self-cleaning oven(s)
• Spring/damper door(s) system
• Temperature probe(s)
• Full extension bottom rack(s)
• Hidden bake element and recessed broil element
• Triple pane oven door windows and dual halogen lighting
• Blue porcelain oven interior(s)
• Adjustable stainless steel legs in front and adjustable patentpending rear casters
• High altitude conversion kit available
• Optional risers – 5" (127 mm), 10"
(254 mm) and 20" (508 mm) with shelf – 10" (254 mm) minimum for charbroiler and French top units in non-island applications
• Optional dehydration accessory
• Optional Bake Stone accessory
• Two and five year residential warranty
• CSA certified for US and Canada
For optional accessories, contact your
Wolf dealer
Dual stacked sealed burners
Stainless steel island trim
11" (279 mm) griddle (optional)
11" (279 mm) charbroiler (optional)
Continuous cast iron top grates
Pivoting hidden control panel
Control knobs with platinum bezels
Griddle "ready" indicator light
Stainless steel exterior finish
Coaxial oven selector knob(s)
Dual halogen oven lighting
Spring / damper door system
Spring / damper door system
Wolf Model DF484CG
48" (1219 mm) Dual Fuel Range shown
Adjustable front legs and rear casters
Blue porcelain oven interior(s)
Dual convection oven
31
W
O L F
D
U A L
F
U E L
R
A N G E S
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
IMPORTANT NOTE: Caution must be used in planning the proper installation of the Wolf dual fuel range to avoid any fires or damage to adjacent cabinetry or kitchen equipment.
Please follow the minimum clearances established in the finished rough-in dimensions.
Also, it is important that you plan for the proper ventilation when installing a Wolf dual fuel range. It is recommended that you use a Wolf Pro
Series ventilation hood with all Wolf dual fuel ranges. Refer to pages 52-
57 for Pro Series ventilation specifics and the Pro Series Ventilation Recom-
mendations charts on pages 60-61.
All Wolf dual fuel ranges come in the classic stainless steel finish. Distinctive red or black knobs are available for your client. Contact your Wolf dealer for help acquiring the Dual Fuel
Range Knob Kit of choice.
Oven Interior Dimensions
• 30" (762 mm) Dual Fuel Range:
21-1/2" W x 16-1/2" H x 16-3/8" D
(546 x 419 x 416 mm)
• 36" (914 mm) Dual Fuel Range:
26-1/2" W x 16-1/2" H x 16-3/8" D
(673 x 419 x 416 mm)
• 48" (1219 mm) Dual Fuel Range:
Large oven: 21-1/2" W x 16-1/2" H x
16-3/8" D (546 x 419 x 416 mm)
Small oven: 11-5/8" W x 16-1/2" H x
16-3/8" D (295 x 419 x 416 mm)
• 60" (1524 mm) Dual Fuel Range:
Both ovens: 21-1/2" W x 16-1/2" H x
16-3/8" D (546 x 419 x 416 mm)
Space Requirements
The finished rough-in dimensions you need to incorporate into your plans are noted on the following page. Also refer to the chart below. We have minimized the information contained in the illustrations, concentrating on the critical information you must plan into your installation.
Electrical and Gas Requirements
All Wolf dual fuel ranges are designed to operate on natural gas at 5" (127 mm) WC (water column) pressure or
LP gas at 10" (254 mm) WC pressure.
The maximum gas supply pressure to the regulator should never exceed 14"
(356 mm) WC; .5 psi (3.5 kPa).
Wolf recommends the use of a 1/2"
(13 mm) I.D. commercial type flex hose; a 1/2" (13 mm) I.D. commercial type flex is the minimum size that may be used. All plumbing to the flex hose MUST be 3/4" (19 mm) minimum I.D. pipe.
Wolf dual fuel ranges using natural gas function up to an altitude of
8,000' (2438 m) without any adjustment. Natural gas and LP gas installations from 8,000' (2438 m) to 11,000'
(3353 m) need the High Altitude Kit.
Contact your Wolf dealer for details on these kits.
IMPORTANT NOTE: A separate external gas shut-off valve must be located near the appliance in an accessible location.
The 30" (762 mm) and 36" (914 mm) ranges require a 240 V AC, 60 Hz, 30 amp fused electrical supply to operate the electrical portions of your unit.
The 48" (1219 mm) and 60" (1524 mm) ranges require a 240 V AC, 60
Hz, 50 amp fused electrical supply.
These units are designed with a terminal block on the rear of the range. The terminal block allows for a
3-wire or 4-wire installation. For a
4-wire installation, the ground strap from the unit to the terminal block must be cut. Two concentric knockouts on the base of the unit, are provided to allow a certified electrical contractor to wire the range directly to a junction box. The terminal block will also accept an appliance cord that is sized correctly for the ranges' voltage and amperage.
You must follow all National Electrical
Code and gas regulations. In addition, be aware of local codes and ordinances when installing your services.
Installation Dimensions
30" (762 mm) 36" (914 mm) 48" (1219 mm) 60" (1527 mm)
Dual Fuel Range Dual Fuel Range Dual Fuel Range Dual Fuel Range
A Overall width of range (width may vary to + 1 / 8 ") 29 7 / 8 " (759 mm) 35 7 / 8 " (911 mm) 47 7 / 8 " (1216 mm) 60 1 / 8 " (1527 mm)
B
C
Finished rough opening width
Dimension from edge of rough opening 8
30 " (762 mm)
1 / 2 " (216 mm)
36 " (914 mm)
8 1 / 2 " (216 mm)
48 " (1219 mm) 60 1 / 4 " (1530 mm)
24" (610 mm) 31" (787 mm)
D Location of gas supply
E Location of electrical
10" (254 mm)
13" (330 mm)
15" (381 mm)
19" (483 mm)
10 (254 mm)
13" (330 mm)
10 (254 mm)
13" (330 mm)
NOTE: Dimensions correspond to the illustrations on the following page.
32
W
O L F
D
U A L
F
U E L
R
A N G E S
I N S T A L L A T I O N D I M E N S I O N S
35 7 / 8 "
(911)
36 7 / 8 "
(937)
TO
COOKING
SURFACE
29 1 / 2 " (749)
OVERALL DEPTH
27 1 / 2 "
(699)
24 1 / 4 "
(616)
25" (635)
47" (1194)
36 7 / 8 "
(937)
OVERALL
HEIGHT
A
OVERALL WIDTH
NOTE: Dimensions in parentheses are in millimeters.
COMBUSTIBLE CONSTRUCTION
LEGS AND CASTERS ALLOW
2 1 / 8 " HEIGHT ADJUSTMENT
VENTILATION HOOD
13" max
(330)
30" min (762)
COOKING SURFACE
TO COMBUSTIBLE
CONSTRUCTION
44" min (914)
TO CHARBROILER
30" min (762) TO
36" max (914)
TO BOTTOM OF
VENTILATION HOOD
6" min
(152)
TO WALL
18" min (457)
TO COOKING
SURFACE
COOKING SURFACE
B
FINISHED ROUGH OPENING WIDTH
36"
(914)
36 7 / 8 "
(937) TO
COOKING
SURFACE
D
LOCATION
OF GAS
SUPPLY
3 1 / 4 "
(83)
C
LOCATION OF GAS AND
ELECTRICAL EXTENDS 3"
ON FLOOR FROM BACK WALL
E
LOCATION OF
ELECTRICAL
ISLAND INSTALLATIONS: 12" MINIMUM
CLEARANCE FROM BACK OF RANGE
TO COMBUSTIBLE CONSTRUCTION
NOTE: Refer to the chart on the previous page for dimensions referenced by letters in the illustrations.
33
R304 R488
R366 R486C
R364C R486G
R364G R484CG
R484DC
R484DG
R484F
R482CF
R606DC
R606DG
R606F
R606CG
R604CF
R604GF
W O L F G A S R A N G E S
If it looks as if it could be in a restaurant kitchen, well, that’s natural.
That’s precisely where Wolf has spent the past seven decades, perfecting the form, function and sheer durability of our stainless steel gas ranges.
Wolf gas ranges come in 30" (762 mm), 36 (914 mm), 48" (1219 mm) and 60" (1524 mm) widths, and combined with the range top options, the different configurations you can choose from are numerous.
Model numbers indicate the range top features; (C) charbroiler, (G) griddle, (DC) double charbroiler,
(DG) double griddle and (F) French top.
Advanced standard features such as an infrared oven broiler; convection
baking, dual burners, a carbon steel
griddle, infrared charbroiler and
French top are all yours for the asking. The freedom to customize your gas range will make you and your client look great.
W
O L F
G
A S
R
A N G E S
F E A T U R E S
• Natural or LP gas models
• Classic stainless steel exterior
• Large red control knobs with four position settings (optional black knobs available)
• Chrome bezels surround all knobs
• Dual brass burners with automatic re-ignition at all settings
• Cast iron porcelain coated grates
• Optional S-grates available
• Stainless steel drip tray on ball bearing slides
• Door windows and interior lights in ovens
• Porcelain oven interior
• 3" (76 mm) adjustable stainless steel legs in front and adjustable rear casters
• Full side panels and skirt
• High altitude conversion kit available
• Optional risers – 5" (127 mm),
10" (254 mm) and 20" (508 mm) with shelf
• Two and five year residential warranty
• CSA certified for US and Canada
For optional accessories, contact your
Wolf dealer
11" (279 mm)
Charbroiler (optional)
Individual porcelain coated cast iron grates
5" (127 mm) riser (optional)
11" (279 mm)
Griddle (optional)
Dual brass burners
Oven light switch
Adjustable oven racks
Burner spill tray
Convection fan switch
Large red control knobs
Oven light switch
Pull-out drip tray
Oven-ready light
Griddle "ready" indicator light
Full side panels and skirt standard
Wolf Model R484CG
48" (1219 mm) Gas Range shown
35
W
O L F
G
A S
R
A N G E S
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
IMPORTANT NOTE: Caution must be used in planning the proper installation of the Wolf gas range to avoid any fires or damage to adjacent cabinetry or kitchen equipment.
Please follow the minimum clearances established in the finished rough-in dimensions.
Also, it is important that you plan for the proper ventilation when installing a Wolf gas range. It is recommended that you use a Wolf Pro Series ventilation hood with all Wolf gas ranges.
Refer to pages 52-57 for Pro Series ventilation specifics and the Pro Series
Ventilation Recommendations charts on pages 60-61.
All Wolf gas ranges come in the classic stainless steel finish and are shipped with the distinctive red knobs. Optional black knobs are available at no cost. Contact your
Wolf dealer.
• 60" (1524 mm) Gas Range:
Both ovens: 24" W x 16-1/2" H x 17" D
(610 x 419 x 432 mm)
Space Requirements
The finished rough-in dimensions you need to incorporate into your plans are noted on the following page. Also refer to the chart below. We have minimized the information contained in the illustrations, concentrating on the critical information you must plan into your installation.
IMPORTANT NOTE: A separate external gas shut-off valve must be located near the appliance in an accessible location.
The Wolf gas range requires a
110/120 V electric supply to operate the electronic ignition system. The 6'
(1.8 m) supply cord provided with the range is equipped with a 3-prong, grounded plug for protection against shock hazard. The service should have its own 15 amp circuit breaker.
You must follow all National Electrical
Code and gas regulations. In addition, be aware of local codes and ordinances when installing your services.
Oven Interior Dimensions
• 30" (762 mm) Gas Range:
24" W x 16-1/2" H x 17" D
(610 x 419 x 432 mm)
• 36" (914 mm) Gas Range:
30" W x 16-1/2" H x 17" D
(762 x 419 x 432 mm)
• 48" (1219 mm) Gas Range:
Large oven: 24" W x 16-1/2" H x 17" D
(610 x 419 x 432 mm)
Small oven: 13-1/2" W x 16-1/2" H x
18-1/2" D (343 x 419 x 470 mm)
Electrical and Gas Requirements
All Wolf gas ranges are designed to operate on natural gas at 5" (127 mm) WC (water column) pressure or
LP gas at 10" (254 mm) WC pressure.
The maximum gas supply pressure to the regulator should never exceed
14" (356 mm) WC; .5 psi (3.5 kPa).
Wolf recommends the use of a 1/2"
(13 mm) I.D. commercial type flex hose; a 1/2" (13 mm) I.D. commercial type flex is the minimum size that may be used. All plumbing to the flex hose MUST be 3/4" (19 mm) minimum I.D. pipe.
The Wolf gas range functions up to
6,000' (1828 m) in altitude without any adjustment. If installation is above 6,000' (1828 m), contact your
Wolf dealer.
Installation Dimensions
A Overall Width of Gas Range – may vary to + 1
B Finished Rough Opening Width
/ 4
30" (762 mm)
Gas Range
" (6 mm) 30" (762 mm)
36" (914 mm)
Gas Range
36" (914 mm)
48" (1219 mm)
Gas Range
48" (1219 mm)
60" (1524 mm)
Gas Range
60" (1524 mm)
30 1 / 4 " (768 mm) 36 1 / 4 " (921 mm) 48 1 / 4 " (1226 mm) 60 1 / 4 " (1530 mm)
C Location of Gas Supply (within shaded area)
D Location of Electrical
E Location of Electrical (within shaded area)
12" (305 mm)
10" (254 mm)
12" (305 mm)
12" (305 mm)
10" (254 mm)
12" (305 mm)
12" (305 mm)
26" (660 mm)
12" (305 mm)
12" (305 mm
10" (254 mm)
12" (305 mm)
NOTE: Dimensions correspond to the illustrations on the following page.
36
I N S T A L L A T I O N D I M E N S I O N S
A
OVERALL WIDTH
COOKING
SURFACE
37"
(940)
36"
(914)
35 1 / 2 "
(902)
19 1 / 8 " (486)
2 1 /
2
"
(64)
3" (76) FRONT LEGS WITH
1" (25) HEIGHT ADJUSTMENT
28 3 /
8
"
(721)
OVERALL DEPTH
27 1 /
4
"
(692)
9 1 /
4
"
(235)
1 3 /
4
"
(44)
20" (508)
RISER
10" (254)
RISER
5" (127)
RISER
56 3 /
4
"
(1441)
46
3
/ 4 "
(1187)
41 3 / 4 "
(1060)
43
3
/ 8 " (1102)
ISLAND OR PENINSULA
INSTALLATION
36"
(914)
24 1 / 2 " (622)
25 1 / 4 " (641)
REAR CASTERS ALLOW
1" (25) HEIGHT ADJUSTMENT
COMBUSTIBLE CONSTRUCTION
VENTILATION HOOD
13" max
(330)
CABINET
DEPTH
6" min
(152)
TO
COMBUSTIBLE
MATERIALS
*30" min (762)
SURFACE BURNERS AND
GRIDDLE
*36" min (914)
CHARBROILER
*44" min (1118)
ALL 60" (1524) RANGES
30" (762) TO 36" (914)
COOKING SURFACE TO
BOTTOM OF
VENTILATION HOOD
COOKING SURFACE
6" min
(152)
TO
COMBUSTIBLE
MATERIALS
D
B
FINISHED ROUGH OPENING WIDTH
LOCATION OF
ELECTRICAL
E
8"
(203)
5 1 / 2 "
(140)
E
* MINIMUM DISTANCE FROM COOKING SURFACE
TO BOTTOM OF COMBUSTIBLE CONSTRUCTION
NOTE: Dimensions in parentheses are in millimeters.
2"
(51)
** LOCATION OF
GAS SUPPLY
C
G
5"
(127)
COOKING
SURFACE
37"
(940)
36" max
(914)
18" min (457)
TO COOKING
SURFACE
** LOCATION OF GAS SUPPLY EXTENDS
3" (76) ON FLOOR FROM BACK WALL
3"
(76)
NOTE: Refer to the chart on the previous page for dimensions referenced by letters in the illustrations.
ISLAND INSTALLATION:
NO SIDE WALL OR REAR WALL
ABOVE COOKING SURFACE
PENINSULA INSTALLATION:
NO SIDE WALL ABOVE
COOKING SURFACE
*** ISLAND
INSTALLATION
36"
(914)
*** 12" (305) MINIMUM CLEARANCE TO
COMBUSTIBLE MATERIALS –
0" (0) TO NON-COMBUSTIBLE MATERIALS
37
RT366 RT488
RT364C RT486C
RT364G RT486G
RT362F RT484CG
RT484DC
RT484DG
RT484F
RT482CF
W O L F G A S R A N G E T O P S
If you want to offer a more professional look to your client’s kitchen and still use a cooktop, look to the rangetops from Wolf. They offer you that commercial look but give you flexibility to use the ovens in other locations in the kitchen. In fact the Wolf framed ovens would be a beautiful complement to these cooking instruments.
Wolf gas rangetops come in 36" (914 mm) and 48" (1219 mm) widths, and combined with the cooking feature options, the different configurations you can choose from are numerous.
Model numbers indicate the rangetop features; (C) charbroiler, (G) griddle,
(DC) double charbroiler, (DG) double griddle and (F) French top.
Choose from two, four, six or eight dual burners or consider the Wolf exclusive infrared charbroiler, griddle or French top for the ultimate in restaurant cooking in the home.
The dual burners can produce 16,000
Btu/hr (4.7 kWh) for professional cooking heat and turn down to 500
Btu/hr (.1 kWh) for those delicate jobs like melting chocolate.
W
O L F
G
A S
R
A N G E T O P S
F E A T U R E S
• Natural or LP gas models
• Classic stainless steel exterior
• Large red control knobs with four position settings (optional black knobs available)
• Chrome bezels surround all knobs
• Dual brass burners with automatic re-ignition at all settings
• Cast iron porcelain coated grates
• Optional S-grates available
• Stainless steel drip tray on ball bearing slides
• Low profile stainless steel island trim
• High altitude conversion kit available
• Optional 10-1/2" (267 mm) riser
• Two and five year residential warranty
• CSA certified for US and Canada
For optional accessories, contact your
Wolf dealer
Low profile stainless steel island trim
11" (279 mm)
Charbroiler (optional)
11" (279 mm)
Griddle (optional)
Individual porcelain coated cast iron grates
Dual brass burners
Stainless steel exterior finish
Wolf Model RT484CG
48" (1219 mm) Gas Rangetop shown
Large red control knobs
Griddle "ready" indicator light
Pull-out tray
39
W
O L F
G
A S
R
A N G E T O P S
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
IMPORTANT NOTE: Caution must be used in planning the proper installation of the Wolf gas rangetop to avoid any fires or damage to adjacent cabinetry or kitchen equipment. Please follow the minimum clearances established in the finished rough-in dimensions.
Also, it is important that you plan for the proper ventilation when installing a Wolf gas rangetop. It is recommended that you use a Wolf Pro
Series ventilation hood with all Wolf gas rangetops. Refer to pages 52-57 for Pro Series ventilation specifics and the Pro Series Ventilation Recommen-
dations charts on pages 60-61.
All Wolf gas rangetops come in the classic stainless steel finish and are shipped with the distinctive red knobs. Optional black knobs are available at no cost. Contact your
Wolf dealer for help acquiring the black knobs.
Space Requirements
The finished rough-in dimensions you need to incorporate into your plans are noted on the following page. Also refer to the chart below. We have minimized the information contained in the illustrations, concentrating on the critical information you must plan into your installation.
Electrical and Gas Requirements
All Wolf gas rangetops are designed to operate on natural gas at 5" (127 mm) WC (water column) pressure or
LP gas at 10" (254 mm) WC pressure.
The maximum gas supply pressure to the regulator should never exceed
14" (356 mm) WC; .5 psi (3.5 kPa).
Wolf recommends the use of a 1/2"
(13 mm) I.D. commercial type flex hose; a 1/2" (13 mm) I.D. commercial type flex is the minimum size that may be used. All plumbing to the flex hose MUST be 3/4" (19 mm) minimum I.D. pipe.
The Wolf rangetop functions up to
6,000' (1828 m) in altitude without any adjustment. If installation is above 6,000' (1828 m), contact your
Wolf dealer.
IMPORTANT NOTE: A separate external gas shut-off valve must be located near the appliance in an accessible location.
The Wolf rangetop requires a
110/120 V electric supply to operate the electronic ignition system. The 6'
(1.8 m) power supply cord provided with the rangetop is equipped with a
3-prong, grounded plug for protection against shock hazard. The service should have its own 15 amp circuit breaker.
You must follow all National Electrical
Code and gas regulations. In addition, be aware of local codes and ordinances when installing your services.
Installation Dimensions
A Overall Width of Gas Rangetop
B Finished Rough Opening Width
C Location of Electrical and Gas Supply
NOTE: Dimensions correspond to the illustrations on the following page.
40
36" (914 mm)
Gas Rangetop
36" (914 mm)
36 1 / 4 " (921 mm)
8" (203 mm)
48" (1219 mm)
Gas Rangetop
48" (1219 mm)
48 1 / 4 " (1226 mm)
16" (406 mm)
I N S T A L L A T I O N D I M E N S I O N S
A
OVERALL WIDTH
COOKING
SURFACE
10 1 / 2 " (267) 9 1 / 2 " (241)
2 3 /
4
"
(70)
(to knobs)
27 1 / 4 " (692)
OVERALL DEPTH
(to knobs)
1 3 / 4 "
(44)
10 1 /
2
"
(267)
RISER
ISLAND OR PENINSULA
INSTALLATION
20"
(508)
24" (610)
9 1 / 2 " (241)
COMBUSTIBLE CONSTRUCTION
VENTILATION HOOD
13" max
(330)
CABINET
DEPTH
6" min
(152)
TO
COMBUSTIBLE
MATERIALS
*30" min (762)
SURFACE BURNERS
AND GRIDDLE
*36" min (914)
CHARBROILER
30" (762) TO 36" (914)
COOKING SURFACE TO
BOTTOM OF
VENTILATION HOOD
6" min
(152)
TO
COMBUSTIBLE
MATERIALS
COOKING SURFACE
3" (76)
TOP VIEW
OF PLATFORM
BACK WALL
1 / 2 "
(13)
E G
C
3 /
4
"
(19) PLATFORM
C
14"
(356)
LOCATE ELECTRICAL AND
GAS SUPPLY WITHIN
SHADED AREA THROUGH
BOTTOM OF PLATFORM
2 3 / 4 "
(70)
36" max
(914)
B
FINISHED ROUGH OPENING WIDTH
* MINIMUM DISTANCE FROM COOKING SURFACE TO BOTTOM OF COMBUSTIBLE CONSTRUCTION
NOTE: Dimensions in parentheses are in millimeters.
18" min (457)
TO COOKING
SURFACE
3 /
4
"
(19) PLATFORM
24" (610)
NOTE: Refer to the chart on the previous page for dimensions referenced by letters in the illustrations.
ISLAND INSTALLATION:
NO SIDE WALL OR REAR WALL
ABOVE COOKING SURFACE
PENINSULA INSTALLATION:
NO SIDE WALL ABOVE
COOKING SURFACE
** ISLAND
INSTALLATION
9 1 / 2 " (241)
** 12" (305) MINIMUM CLEARANCE TO
COMBUSTIBLE MATERIALS –
0" (0) TO NON-COMBUSTIBLE MATERIALS
41
BBQ242(BI)(C) BBQ362(BI)(C)
BBQ36(BI)(C) BBQ48(BI)(C)
W O L F G A S B B Q G R I L L S
Cooking to our way of thinking, is every bit as much a performing art as music or theater. So here is our logic. When the symphony or the
Shakespeare troupe moves outdoors for the festival season, the venue is more casual than usual, but the performance loses nothing in terms of artistry. Why can’t cooking be the same way? With Wolf they are.
Wolf gas BBQ grills are, like their kitchen counterparts, precision instruments.
Constructed of heavy-duty stainless steel, both the 36" (914 mm) and 48"
(1219 mm) models are available built-in or as a freestanding grill on a cart. Model numbers followed by (BI) indicate a built-in unit, while (C) indicates that the grill is on a freestanding cart. Features include a
115 V rotisserie; an infrared rear burner for precise, consistent grilling and optional side burners.
W
O L F
G
A S
B B Q G
R I L L S
F E A T U R E S
• Natural or LP gas models
(must be order specific)
• Built-in or freestanding cart models
(must be order specific)
• Classic stainless steel exterior
• Heavy-duty 18-gauge stainless steel construction
• 115 V rotisserie motor
• Infrared rear rotisserie burner
• Optional side burners
(must be order specific)
• Cast iron porcelain coated grates
• Two piece stainless steel hood and handle
• Heavy-duty locking swivel casters on cart models
• Scraper and protective canvas cover
• Two and five year residential warranty
For optional accessories, contact your
Wolf dealer
Hood handle Infrared rotisserie burner
Porcelain coated grill grates
Rotisserie motor
Hood
Step-up rear burner
Open top burners
Gas control knob
Front Panel
Heavy-duty swivel casters with brake
Wolf Model BBQ362C
48" (1219 mm) Gas BBQ Grill with Freestanding Cart shown
Fold down plate shelf
Drip tray and grease collection tray
43
W
O L F
G
A S
B B Q G
R I L L S
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
It goes without saying that the grill mounted on the freestanding cart takes very little planning from a design perspective. However, there are provisions you need to take into account when planning for a built-in application.
• The BBQ grill should be level and not exposed to the wind.
• Keep your gas lines as short as possible.
• Supporting deck or platform must be able to hold 400 lbs. (181 kg).
• Optional insulated jacket MUST be used if installing into combustible material. Contact your Wolf dealer.
The illustrations on the following page will give you an idea of the overall size that you need to plan for in your installation, plus offer you the finished rough-in dimensions. Also refer to the chart below.
Electrical and Gas Requirements
All Wolf gas BBQ grills are designed to operate on natural gas at 5" (127 mm) WC (water column) pressure or
LP gas at 10" (254 mm) WC pressure.
The maximum gas supply pressure to the regulator should never exceed
14" (356 mm) WC; .5 psi (3.5kPa).
IMPORTANT NOTE: A separate external gas shut-off valve must be located near the BBQ grill in an accessible location. The Wolf BBQ grill requires a 110/120 V electric supply to operate the rotisserie motor. The 6'
(1.8 m) power supply cord on the motor is equipped with a 3-prong grounded plug for protection against shock hazard. The electrical service must be equipped with a grounded
3-prong receptacle.
You must follow all National Electrical
Code and gas regulations. In addition, be aware of local codes and ordinances when installing your services.
Installation Dimensions BBQ242 BBQ36 BBQ362 BBQ48
A Overall Width of Grill 36" (914 mm) 36" (914 mm) 48" (1219 mm) 48" (1219 mm)
B Width of Hood
C Rough Opening Width (Combustible Enclosure)
24" (610 mm) 36" (914 mm)
38 1 / 4 " (972 mm) 38 1 / 4 " (972 mm) 50
36" (914 mm)
1
48" (1219 mm)
/ 4 " (1276 mm) 50 1 / 4 " (1276 mm)
C Rough Opening Width (Non-Combustible Enclosure) 36 1 / 4 " (921 mm) 36 1 / 4 " (921 mm) 48 1 / 4 " (1226 mm) 48 1 / 4 " (1226 mm)
D Rough Opening Depth (Combustible Enclosure) 27 3 / 4 " (705 mm) 27 3 / 4 " (705 mm) 27 3 / 4 " (705 mm) 27 3 / 4 " (705 mm)
D Rough Opening Depth (Non-Combustible Enclosure) 26 3 / 4 " (679 mm) 26 3 / 4 " (679 mm) 26 3 / 4 " (679 mm) 26 3 / 4 " (679 mm)
NOTE: Dimensions correspond to the illustrations on the following page.
44
I N S T A L L A T I O N D I M E N S I O N S
B
30" (762)
OVERALL DEPTH
26"
(660)
HEIGHT OF
BUILT-IN
GRILL
52
3
/ 4 "
(1340)
OVERALL
HEIGHT
(CART
MODELS)
36 1 /
4
"
(921)
TO GRILLING
SURFACE
26 3 /
4
"
(680)
HEIGHT
OF CART
6"
(152)
A
OVERALL WIDTH
NOTE: Dimensions in parentheses are in millimeters.
12"
(305) min
E
C
ROUGH OPENING WIDTH
LOCATE
ELECTRICAL
OUTLET FOR
ROTISSERIE
ON LEFT SIDE
10 1 / 2 " (267)
ROUGH
OPENING
HEIGHT
ALLOW OPENING
FOR ACCESS
DOOR
12"
(305) min
3 1 / 8 "
(79)
3 3 / 4 " (95)
3
1
/ 8 "
(79)
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BACK WALL LOCATION OR
BOTTOM LOCATION)
COMBUSTIBLE ENCLOSURE
36 1 / 2 " max
(927)
D
ROUGH OPENING
DEPTH
12"
(305) min
10 1 / 2 " (267)
ROUGH
OPENING
HEIGHT
2
7
/ 8 "
(73)
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BOTTOM LOCATION)
LOCATE
ELECTRICAL
OUTLET FOR
ROTISSERIE
ON LEFT SIDE
NOTE: Dimensions in parentheses are in millimeters.
6"
(152) min
C
ROUGH OPENING WIDTH
6"
(152) min
E
9 1 /
2
"
(242)
ROUGH
OPENING HEIGHT
ALLOW OPENING
FOR ACCESS
DOOR
2 3 /
4
"
(70)
2 1 / 8 "
(54)
2 1 / 8 "
(54)
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BACK WALL LOCATION OR
BOTTOM LOCATION)
NON-COMBUSTIBLE ENCLOSURE
D
ROUGH OPENING
DEPTH
4 1 /
2
"
(114) min
36 1 / 2 " max
(927)
9 1 /
2
"
(242)
ROUGH
OPENING HEIGHT
1 7 / 8 "
(48)
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BOTTOM LOCATION)
NOTE: Refer to the chart on the previous page for dimensions referenced by letters in the illustrations.
45
Chimney Wall and
Island Hoods
Downdraft Ventilation
W O L F V E N T I L A T I O N
We designed Wolf ventilation to create a strong, instant visual impression – like a piece of stainless steel sculpture attached to the wall or ceiling. But rest assured, there’s also a lot of hard-nosed functional thinking behind those smoothly sculpted lines.
Brilliant halogen lighting illuminates your cooking surface. Powerful multi-speed blowers whisk away smoke and odors. The five-layer baffle filters remove easily for cleaning.
Restaurant-grade baffle filters are standard on all Wolf Pro Series hoods.
To keep foods warm, heat lamps are standard on the Pro Series 27" (686 mm) deep wall hoods only.
Wall and island hoods are available in classic stainless steel in varying depths and widths up to 66" (1676 mm).
Wolf downdraft systems have a top cover and user interface available in
classic stainless steel finish and the premium finishes of platinum and
carbon stainless steel.
Pro Series Wall Hoods,
Island Hoods and Liners
C
O O K T O P
V
E N T I L A T I O N
C H I M N E Y W A L L A N D
I S L A N D H O O D S
IMPORTANT NOTE: Wolf chimney wall and island hoods are recommended for use with Wolf electric, gas and integrated cooktops.
For Wolf dual fuel ranges, gas ranges and rangetops, it is recommended that you use a Pro Series ventilation hood, see pages 52-57.
Chimney Wall Hoods – Available in classic stainless steel, 30" (762 mm) and 36" (914 mm) wide by 21" (533 mm) deep.
Chimney Island Hood – Available in classic stainless steel, 42" (1067 mm) wide by 27" (686 mm) deep.
These hoods come with a telescopic chimney flue extension that allows you to reach an 8' (2.4 m) to 9' (2.7
m) ceiling height from the floor with a finished look. A flue extension to accommodate 10' (3.0 m) ceilings is available as a sales accessory. Contact your Wolf dealer. All Wolf chimney hoods have an 8" (203 mm) round vertical discharge.
These illustrations of the three chimney hoods give you overall dimensions, while the installation dimensions are provided in the illustrations on the following page.
Chimney Hoods Features
• Classic stainless steel finish
•
•
Seamless construction
Front mounted controls
12"
(305 mm)
18"
(457 mm) 30 1 / 2 " min
(775 mm)
48 1
TO
/
2
" max
(1232 mm)
• LED indicators
• Sealed halogen lighting
• Three-speed blower control
• Variable speed blowers
• Heat Sentry feature (automatically adjusts blower speed)
6"
(152 mm)
2"
(51)
6 7 / 8 "
(175 mm)
E
21"
(533 mm)
4"
(102)
30"
(762 mm)
30" (762 mm) Chimney Wall Hood
• Filter clean timer
• Delay off feature
• Stainless steel filter cover with aluminum mesh filter
(dishwasher safe)
• Built-in back draft damper
• Internal or remote blower options
• Fits 8' (2.4 m) to 9' (2.7 m) ceilings
6"
(152 mm)
2"
(51)
9 1 /
4
"
(235 mm)
12"
(305 mm)
E
4"
(102)
18"
(457 mm) 32
11
/ 16 " min
(829 mm)
50 7
TO
/ 8 " max
(1292 mm)
21"
(533 mm)
35
7
/ 16 "
(900 mm)
36" (914 mm) Chimney Wall Hood
ELECTRICAL IS
LOCATED THROUGH
TOP OF HOOD
12"
(305 mm)
18"
(457 mm)
33 9 /
16
" min
(851 mm)
TO
47 1 / 16 " max
(1197 mm)
9 1 /
4
"
(235 mm)
27"
(686 mm)
42"
(1067 mm)
42" (1067 mm) Chimney Island Hood
47
C
O O K T O P
V
E N T I L A T I O N
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
Wolf chimney wall and island hoods are recommended for use with Wolf electric, gas and integrated cooktops, and should be as least as wide as the cooking surface. These hoods are not recommended for use with Wolf dual fuel ranges, gas ranges and rangetops.
Installation of chimney wall and island hoods should be 24" (610 mm) to 30"
(762 mm) from the bottom of the hood to the cooking surface.
These hoods are shipped without the blower assembly. The blower or ventilator will vary in size and is always dictated by the cooking surface and the distance to the exterior of the home. The blower assemblies are quite varied, and depending on the amount of air you want to move and the length of the duct run, you have many options. You also need to consider if you are going to use these assemblies as internal blowers or mount them externally.
Refer to the Cooktop Ventilation
Recommendations charts on pages
58-59 or contact your Wolf dealer for additional information.
21"
(533)
48 1 / 2 " or 50 7
(1232 or 1292)
/ 8 "
MAXIMUM
HEIGHT OF HOOD
NOTE: Dimensions in parentheses are in millimeters unless otherwise specified.
4"
(102)
6"
(152)
8' to 9'
(2.4 m - 2.7 m)
FLOOR TO
CEILING HEIGHT
24" to 30"
(610 - 762)
TO COOKING
SURFACE
30 1 / 2 " or 32 11 / 16 "
(775 or 830)
BOTTOM OF HOOD
TO MINIMUM
FLUE EXTENSION
Installation dimensions for 30" (762 mm) and 36" (914 mm) chimney wall hoods.
NOTE: Dimensions in parentheses are in millimeters unless otherwise specified.
E
30" or 35 7 / 16 "
(762 or 900)
0" to 15 7 / 16 " or 17
(0 - 392 or 445)
1 / 2 "
HEIGHT OF
UPPER FLUE
0" to 14 7 / 16 "
(0 - 367)
HEIGHT OF
UPPER FLUE
47 1 / 16 " (1195)
MAXIMUM
HEIGHT
OF HOOD
33 9 / 16 " (853)
BOTTOM OF HOOD
TO MINIMUM
FLUE EXTENSION
Electrical Requirements
Wolf chimney wall and island hoods require a separate, grounded 120 V,
60 Hz power supply. The service should have its own 15 amp circuit breaker. The issue of placing the outlet is not critical, as long as you provide a minimum of 6' (1.8 m) of
120 V AC power cable.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
27" (686)
8' to 9'
(2.4 m - 2.7 m)
FLOOR TO
CEILING HEIGHT
24" to 30"
(610 - 762)
TO COOKING
SURFACE
42" (1067)
LOCATION OF ELECTRICAL
ON CEILING THROUGH
TOP OF HOOD
Installation dimensions for chimney island hoods.
48
C
O O K T O P
V
E N T I L A T I O N
D O W N D R A F T
V E N T I L A T I O N S Y S T E M S
IMPORTANT NOTE: The downdraft ventilation systems are recommended for use with Wolf electric, gas and integrated cooktops, excluding the steamer and fryer cooktops. For Wolf dual fuel ranges, gas ranges and rangetops, it is recommended that you use a Pro Series ventilation hood, see pages 52-57.
Wolf Downdraft systems come in 30"
(762 mm) and 36" (914 mm) widths.
The top cover and user interface are available in the classic stainless steel finish, and the premium finishes of platinum and carbon stainless steel.
These illustrations of the two downdraft sizes, give you overall dimensions, while the installation dimensions are provided in the illustrations on the following pages.
Downdraft Features
• Classic, platinum or carbon stainless steel finish on top cover and user interface
• Remote mounted user interface
• Three-speed blower control
• Variable speed blowers
• Filter clean timer
• Delay off feature
• Stainless steel filter with aluminum mesh (dishwasher safe)
• LED indicators
• 9" (229 mm) chimney elevation
• Internal and remote blower options
30"
(762 mm)
9
1
/ 16 "
(230 mm)
26 1 /
4
"
(667 mm)
1
1
/ 2 " (38 mm)
DEPTH OF
DOWNDRAFT CHIMNEY
Model DD30
30" (762 mm) Downdraft
36"
(914 mm)
9 1 /
16
"
(230 mm) 32 1 / 4 "
(819 mm)
1 1 /
2
"
(38 mm)
DEPTH OF
DOWNDRAFT CHIMNEY
Model DD36
36" (914 mm) Downdraft
2 3 /
8
"
(60 mm)
2 3 /
8
"
(60 mm)
49
C
O O K T O P
V
E N T I L A T I O N
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
The downdraft ventilation system should be at least as wide as the cooking surface you are designing into the home.
The 30" (762 mm) downdraft will fit most 30" (762 mm) wide cabinets and the 36" (914 mm) downdraft will fit in most 36" (914 mm) wide cabinets. Cabinet backs may need to be removed. It is recommended that oversized cabinets be used for easier installation.
IMPORTANT NOTE: To incorporate a downdraft system and a Wolf cooktop, you must allow for a minimum 25-1/8" (638 mm) flat counter space from front to back. A countertop with a raised lip and/or backsplash may not allow enough space for proper installation. 2-3/8"
(60 mm) of flat countertop is required behind the cooktop and
1-3/4" (44 mm) is necessary between the back edge of the cooktop and inside of cabinet back. Also, the cabinet back may need to be removed.
When installing cooktop service connections, you MUST use adjacent base cabinets outlined in the cooktop specifications.
Except for Models DD30I and DD36I, downdrafts are shipped without the blower assembly. The blower or ventilator will vary in size and is dictated by the cooking surface and the distance to the exterior of the home.
The blower assemblies are quite varied, and depending on the amount of air you want to move and the length of the duct run, you have many options.
You also need to consider if you are going to use these assemblies as internal blowers or mount them externally.
1 3/4 " min (45)
BACK EDGE
OF COOKTOP
TO INSIDE OF
CABINET BACK*
.344"
29 5/16 "
(745)
COUNTERTOP
TO BOTTOM OF
AIR BOX
25
1/8
" min (638)
OF FLAT COUNTERTOP*
5/8 "
(16)
19
1/4
" (489)
COOKTOP CUT-OUT
DEPTH
2
3/8
" (67)
2 1/8 " (54)
3
1/4
"
(83)
7 11/16
(197)
"
5"
(127)
18"
(457)
3
5/8
"
(92)
7
1/8
"
(181)
24" min (610)
CABINET DEPTH
*AREAS OF POTENTIAL INTERFERENCE
NOTE: Dimensions in parentheses are in millimeters.
25
1/8
" min
(638)
FLAT
COUNTERTOP
SPACE
26 7/8 " (683)
FOR 30" DOWNDRAFT
32 7/8 " (835)
FOR 36" DOWNDRAFT
COOKTOP CUT-OUT
WIDTH
2 1/2 " min
(64)
2
3/4
" (70)
19
1/4
(489)
"
COUNTERTOP TOP VIEW
Installation dimensions for downdraft systems
Refer to the Cooktop Ventilation
Recommendations charts on pages
58-59 or contact your Wolf dealer for additional information.
2 1/2 "
(64) min
WITH NO
RAISED LIP*
36"
(914)
50
C
O O K T O P
V
E N T I L A T I O N
Electrical Requirements
The Wolf downdraft requires a separate, grounded 110/120 V, 60 Hz power supply. The service should have its own 15 amp circuit breaker and a grounded 3-prong receptacle should be located within the reach of the 2'
(.6 m) power cord. The specific location of the outlet is not critical, as long as it is within reach of the power cord that is located mid-way, top and bottom on the right side of the downdraft.
IMPORTANT NOTE: If the 30" (762 mm) downdraft is being installed in a
30" (762 mm) wide cabinet, or the
36" (914 mm) downdraft in a 36"
(914 mm) wide cabinet, the outlet cannot be located on the back wall of the cabinet. The outlet may be placed in adjacent cabinetry. Refer to the illustration for placement of electrical.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
Wolf downdraft systems have an adjustable discharge that will allow you to negotiate ducting around floor joists and other obstacles. Refer to the illustration for installation options.
IMPORTANT NOTE: This appliance must be used with a Wolf approved top cover and user interface.
The remote mounted user interface is sold as a sales accessory.
You must plan the installation of the user interface to be within 10' (3.0 m) of the downdraft assembly and a minimum of 4" (102 mm) from the outer edge of cooktop element or burner. You will be required to drill three holes and connect the two units by the provided wire.
NOTE: Dimensions in parentheses are in millimeters.
E
10" (254)
4" min (102)
3 1 /
2
"
(89)
ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
24" min
(610)
Electrical placement for downdraft systems
5" MAX (127)
REMOTE BLOWER
4" min (102)
3 1 /
2
"
(89)
E
10" (254)
30" min (762)
FOR MODEL DD30
36" min (914)
FOR MODEL DD36
CENTERLINE OF COUNTERTOP CUTOUT 16 3/8 " (416)
INTERNAL BLOWER
21 1/2 " (546)
REMOTE BLOWER
CL
22 1/8 "
(562)
INTERNAL BLOWER
19" (483)
REMOTE BLOWER
RIGHT
DISCHARGE
LOCATION
LEFT
DISCHARGE
LOCATION
CENTERLINE OF COUNTERTOP CUTOUT
5 1/2 " (140)
INTERNAL BLOWER
4
1/4
" (108)
REMOTE BLOWER NOTE: DUCT CUTOUT
DIMENSIONS:
10
1/4
" (260) x 3
1/2
" (89)
INTERNAL BLOWER
14 1/4 "
(362)
x 3 1/2 "
(89)
REMOTE BLOWER
1"
(25)
- 7"
(178)
INTERNAL BLOWER
2 1/2 " MAX (165)
REMOTE BLOWER
CL
BOTTOM
DISCHARGE
LOCATION
5
1/2
" (140)
INTERNAL BLOWER
4 1/4 " (108)
REMOTE BLOWER
NOTE: Measurements are to centerline of duct cutouts.
NOTE: Dimensions in parentheses are in millimeters.
Adjustable discharge options for downdraft systems
51
P
R O
S
E R I E S
V
E N T I L A T I O N
P R O S E R I E S W A L L
H O O D S
The Pro Series wall hoods are recommended for use with all Wolf cooking appliances, with a few exceptions for the 22" (559 mm) deep hoods. All
Pro Series wall hoods are available in classic stainless steel. (R) models include mounting holes for the optional decorative rail.
22" (559 mm) Deep Wall Hoods
Available in 30" (762 mm), 36"
(914 mm), 42" (1067 mm) and 48"
(1219 mm) widths. (I) models include a 600 cfm internal blower. These hoods are not recommended for use with Wolf dual fuel range, gas range and rangetop models with a char-
broiler or griddle.
NOTE: Rear discharge is only applicable on 22" (559 mm) wall hoods
(excluding W302210I and W362210I) and 24" (610 mm) wall hoods used with a WBLOWER-120INT (804702) or any Wolf remote blower.
WBLOWER-90INT (805086) is not for use in rear discharge applications.
24" (610 mm) Deep Wall Hoods
Available in 30" (762 mm), 36"
(914 mm), 42" (1067 mm), 48"
(1219 mm), 54" (1372 mm), 60"
(1524 mm) and 66" (1676 mm) widths.
27" (686 mm) Deep Wall Hoods
Available in 30" (762 mm), 36"
(914 mm), 42" (1067 mm), 48"
(1219 mm), 54" (1372 mm), 60"
(1524 mm) and 66" (1676 mm) widths.
These illustrations of the three Pro
Series wall hood sizes give you overall dimensions, while the installation dimensions are provided in the illustration on the following page.
Pro Series Wall Hoods Features
• Classic stainless steel finish
• Recessed controls
• Halogen lighting with night-light
• 16-gauge stainless steel shell
• Hand finished with continually welded seams
• Stainless steel enclosed liner
• Stainless steel baffle filters
• Internal or remote blower option
• Heat Sentry feature (automatically adjusts blower speed)
• Heat lamps – 27" (686 mm) deep wall hoods only
• Top or rear discharge with certain models
• Variable speed ventilator control
• Transition with backdraft damper included
• Optional decorative rail assembly in stainless, platinum, brass or copper finish
• Optional 6" (152 mm) and 12"
(305 mm) duct covers
• UL approved for covered outdoor application
10"
(254 mm)
18"
(457 mm)
8" (203 mm)
ROUND TRANSITION
7 1/2 "
(191 mm)
22"
(559 mm)
12"
(305 mm)
30", 36", 42" and 48"
(762, 914, 1067 and 1219 mm)
22" (559 mm) Deep Low Profile Wall Hoods
9
1/2
"
(241 mm)
10" (254 mm)
ROUND TRANSITION
12"
(305 mm)
24"
(610 mm)
30", 36", 42", 48",
54", 60" and 66"
(762, 914, 1067, 1219, 1372,
1524 and 1676 mm)
24" (610 mm) Deep Pro Series Wall Hoods
9 1/2 "
(241 mm)
10" (254 mm)
ROUND TRANSITION
12"
(305 mm)
18"
(457 mm)
27"
(686 mm)
30", 36", 42", 48",
54", 60" and
66"
(762, 914, 1067, 1219, 1372,
1524 and 1676 mm)
27" (686 mm) Deep Pro Series Wall Hoods
52
P
R O
S
E R I E S
V
E N T I L A T I O N
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
Wolf Pro Series wall hoods are recommended for use with any Wolf cooking appliance, and should be as least as wide as the cooking surface.
It is recommended that the hood overlap the cooking surface by 3"
(76 mm) on either side.
Installation of all Pro Series wall hoods should be 30" (762 mm) to
36" (914 mm) from the bottom of the hood to the cooking surface.
Models W302210I and W362210I come with internal blowers, all other wall hoods are shipped without the blower assembly. The blower or ventilator assemblies are quite varied, and depending on the amount of air you want to move and the length of the duct run, you have many options.
You also need to consider if you are going to use these assemblies as internal blowers or mount them externally.
Refer to the Pro Series Ventilation
Recommendations charts on pages
60-61 or contact your Wolf dealer for additional information.
30" TO 36"
(762 - 914)
TO COOKING
SURFACE
LOCATION OF
ELECTRICAL FOR
TOP DISCHARGE
6"
(152)
E
5"
(127)
6"
(152) LOCATION OF
ELECTRICAL FOR
REAR DISCHARGE
E
5"
(127)
WIDTH OF HOOD
COOKING SURFACE
10" (254)
18"
(457)
HEIGHT
OF HOOD
30" TO 36"
(762 - 914)
TO COOKING
SURFACE
22" (559)
24"
(610)
27" (686)
DEPTH OF HOOD
NOTE: Dimensions in parentheses are in millimeters.
Installation dimensions and electrical placement for Pro Series wall hoods
Electrical Requirements
The Wolf Pro Series wall hoods require a separate, grounded 120 V,
60 Hz power supply. The service should have its own 15 amp circuit breaker. The issue of placing the outlet is not critical, as long as you provide a minimum of 6' (1.8 m) of
120 V AC power cable.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
53
P
R O
S
E R I E S
V
E N T I L A T I O N
P R O S E R I E S I S L A N D
H O O D S
The Pro Series island hoods are recommended for use with all Wolf cooking appliances. All Pro Series island hoods are available in classic stainless steel. (R) models include mounting holes for the optional decorative rail.
Wolf Pro Series island hoods are available in 36" (914 mm), 42"
(1067 mm), 54" (1372 mm), and
66" (1676 mm) widths.
This illustration of the Pro Series island hood give you overall dimensions, while the installation dimensions are provided in the illustration on the following page.
Pro Series Island Hoods Features
• Classic stainless steel finish
• Recessed controls
• Halogen lighting with night-light
10" (254 mm)
ROUND TRANSITION
18"
(457 mm)
• 16-gauge stainless steel shell
• Hand finished with continually welded seams
34"
(864 mm)
18", 24", 36" and 48"
(457, 610, 914 and
1219 mm)
8
3/4
"
(222 mm)
13"
(330 mm)
36", 42", 54" and 66"
(914, 1067, 1372 and 1676 mm)
• Stainless steel enclosed liner
• Stainless steel baffle filters
Pro Series Island Hoods
• Internal or remote blower option
• Heat Sentry feature (automatically adjusts blower speed)
• Variable speed ventilator control
• Transition with backdraft damper included
• Optional decorative rail assembly in stainless, platinum, brass or copper finish
• Optional 6" (152 mm) and 12"
(305 mm) duct covers
54
P
R O
S
E R I E S
V
E N T I L A T I O N
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
Wolf Pro Series island hoods are recommended for use with any Wolf cooking appliance, and should always be larger than the cooking surface by a minimum of 3" (76 mm) on each side.
Installation of all Pro Series island hoods should be 30" (762 mm) to
36" (914 mm) from the bottom of the hood to the cooking surface.
All island hoods are shipped without the blower assembly. The blower or ventilator assemblies are quite varied, and depending on the amount of air you want to move and the length of the duct run, you have many options.
You also need to consider if you are going to use these assemblies as internal blowers or mount them externally.
Refer to the Pro Series Ventilation
Recommendations charts on pages
60-61 or contact your Wolf dealer for additional information.
Electrical Requirements
The Wolf Pro Series island hoods require a separate, grounded 120 V,
60 Hz power supply. The service should have its own 15 amp circuit breaker. The issue of placing the outlet is not critical, as long as you provide a minimum of 6' (1.8 m) of
120 V AC power cable.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
30" TO 36"
(762 - 914)
TO COOKING
SURFACE
LOCATION OF ELECTRICAL
CENTERED THROUGH TOP OF HOOD
WIDTH OF HOOD
COOKING SURFACE
18"
(457)
HEIGHT
OF HOOD
30" TO 36"
(762 - 914)
TO COOKING
SURFACE
NOTE: Dimensions in parentheses are in millimeters.
Installation dimensions and electrical placement for Pro Series island hoods
34" (864)
DEPTH OF HOOD
55
P
R O
S
E R I E S
V
E N T I L A T I O N
P R O S E R I E S H O O D
L I N E R S
Sometimes referred to as power packs, these liners bring all of the controls, lighting and convenience of our new ventilation line for those applications where customers are applying their custom exterior treatments.
Wolf Pro Series liners are recommended for use with all Wolf cooking appliances and are available to accommodate 30" (762 mm), 36"
(914 mm), 42" (1067 mm), 48"
(1219 mm), 54" (1372 mm) and 60"
(1524 mm) wide hoods.
These illustrations of the two Pro
Series hood liners give you overall dimensions, while the installation dimensions are provided in the illustration on the following page.
Pro Series Liners Features
• Recessed controls
• Halogen lighting with night-light
• Seamed construction
• Stainless steel baffle filters
• Internal or remote blower option
• Heat Sentry feature (automatically adjusts blower speed)
• Variable speed ventilator control
• Transition with backdraft damper included
12"
(305 mm)
8" (203 mm)
ROUND TRANSITION
7 1/2 "
(191 mm)
12"
(305 mm)
4"
(102 mm)
22
1
/ 2 "
(572 mm)
28 3 / 8 "
(721 mm)
Pro Series Liner (Model L282212I)
P L A N N I N G A N D
D E S I G N I N F O R M A T I O N
Wolf Pro Series hood liners are recommended for use with any Wolf cooking appliance, and should be as least as wide as the cooking surface.
It is recommended that the hood overlap the cooking surface by 3"
(76 mm) on either side.
Installation of all Pro Series hood liners should be 30" (762 mm) to 36"
(914 mm) from the bottom of the hood to the cooking surface.
Model L282212I comes with an internal blower, all other hood liners are shipped without the blower assembly. The blower or ventilator assemblies are quite varied, and depending on the amount of air you want to move and the length of the duct run, you have many options.
You also need to consider if you are going to use these assemblies as internal blowers or mount them externally.
Refer to the Pro Series Ventilation
Recommendations charts on pages
60-61 or contact your Wolf dealer for additional information.
12"
(305 mm)
9
1/2
"
(241 mm)
10" (254 mm)
ROUND TRANSITION
12"
(305 mm)
1"
(25 mm)
4"
(102 mm)
22 1 /
2
"
(572 mm)
34 3 / 8 ", 40 3 / 8 ",
46 3 /
8
", 52 3 /
8
" and
58 3 /
8
"
(873, 1026, 1178, 1330 and 1483 mm)
Pro Series Hood Liners
56
P
R O
S
E R I E S
V
E N T I L A T I O N
Electrical Requirements
The Wolf Pro Series hood liners require a separate, grounded 120 V,
60 Hz power supply. The service should have its own 15 amp circuit breaker. The issue of placing the outlet is not critical, as long as you provide a minimum of 6' (1.8 m) of
120 V AC power cable.
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and ordinances when installing your service.
The top depth of the liner, 12" (305 mm) standard, must be less than the interior depth of the hood. You must measure the interior depth of your hood at the top height of the liner to make sure the liner will fit inside of the decorative hood.
LOCATION OF ELECTRICAL 6"
(152)
DECORATIVE HOOD
E
5"
(127)
HOOD LINER
The Wolf liner comes standard with a 4" (102 mm) lower reveal. Be sure to include this dimension in your decorative hood selection.
DECORATIVE HOOD
12" (305)
HEIGHT OF LINER
HOOD LINER
Decorative Hoods
A decorative hood can be created out of wood, plaster, tile or metal.
The decorative hood and Wolf liner must fit at the bottom edge in both width and depth. The shape of the decorative hood is not critical, the only place where the the liner and outside cover must meet is at the bottom edge of the metal liner.
Wood hoods are rarely square. Always measure inside depth and width dimensions in multiple locations and use the smallest dimensions to verify liner specifications.
The bottom depth and the bottom width of the Wolf liner must meet and fit with the bottom interior of the decorative hood.
Always use the interior measurements of the decorative hood and measure in multiple places.
The height of the liner does not have to be the same as the height of the decorative hood, and is generally shorter.
30"
TO
36"
(762 - 914)
TO COOKING
SURFACE
WIDTH OF LINER
COOKING SURFACE
30"
TO
36"
(762 - 914)
TO COOKING
SURFACE
22 1 / 2 " (572)
DEPTH OF LINER
NOTE: Dimensions in parentheses are in millimeters.
Installation dimensions and electrical placement for Pro Series hood liners.
57
C
O O K T O P
V
E N T I L A T I O N
R
E C O M M E N D A T I O N S
M I N I M U M C F M R E C O M M E N D A T I O N S
Chimney Wall Hoods
CTWH30
CTWH36
CT15E
215*
215*
CT15G
215*
215*
CT30E
450
600
CT30G
450
600
CT36E
600
CT36G
600
IG15
400*
400*
IM15
215*
215*
IS15**
215*
215*
IF15**
400*
400*
Chimney Island Hood
IH4227
CT15E CT15G CT30E CT30G CT36E CT36G
215* 215* 600 600 600 600
IG15
400*
IM15
215*
IS15**
215*
IF15**
400*
Downdrafts
DD30I
DD30R
DD36I
DD36R
CT15E CT15G CT30E CT30G CT36E CT36G
215* 215* 500 500
215*
215*
215*
215*
215*
215*
900
500
900
900
500
900
500
900
500
900
IG15
215*
215*
215*
215*
IM15
215*
215*
215*
215*
IS15** IF15**
Pro Series Hoods
All Hoods
CT15E CT15G CT30E CT30G CT36E CT36G IG15**
215* 215* 600 600 600 600 400*
IM15
215*
IS15**
215*
IF15**
215*
* Use these requirements to determine total CFM when installing multiple cooking products.
** Downdrafts are not recommended for use with IS15 or IF15.
NOTE: CFM recommendations are based on total Btu/hr output. Wolf recommends 1 CFM per 100 Btu/hr (.03 kWh). Additional CFM may be required for charbroilers, griddles and long duct runs.
58
C
O O K T O P
V
E N T I L A T I O N
R
E C O M M E N D A T I O N S
B L O W E R C R O S S - R E F E R E N C E
Chimney Wall Hoods
CTWH30
CTWH36
CTWH36
CTWH30 or CTWH36
CTWH30 or CTWH36
CTWH30 or CTWH36
CTWH30 or CTWH36
Blower
Internal 450 CFM
Internal 600 CFM
Internal 900 CFM
Remote 600 CFM
Remote 900 CFM
Remote 1200 CFM
Remote 1500 CFM
NOTE: Backdraft included. Vertical discharge.
Number
CTBLOWER-45INT (801643)
Transition
Not Required
CTBLOWER-60INT (801644)
CTBLOWER-90INT (801645)
CTBLOWER-60REM (801640)
CTBLOWER-90REM (801641)
Not Required
Not Required
TRANS-8-10
TRANS-8-10
CTBLOWER-120REM (801642) TRANS-8-10
CTBLOWER-150REM (804701) TRANS-8-10
Duct Size
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
Chimney Island Hood
IH4227
IH4227
IH4227
IH4227
IH4227
IH4227
Blower
Internal 600 CFM
Internal 900 CFM
Remote 600 CFM
Remote 900 CFM
Remote 1200 CFM
Remote 1500 CFM
NOTE: Backdraft included. Vertical discharge.
Number
CTBLOWER-60INT (801644)
CTBLOWER-90INT (801645)
CTBLOWER-60REM (801640)
Transition
Not Required
Not Required
TRANS-8-10
CTBLOWER-90REM (801641) TRANS-8-10
CTBLOWER-120REM (801642) TRANS-8-10
CTBLOWER-150REM (804701) TRANS-8-10
Duct Size
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
8" (203 mm) Round
Downdrafts
DD30I or DD36I
DD30R or DD36R
DD30R or DD36R
DD30R or DD36R
NOTE: Adjustable discharge.
Blower
Internal 500 CFM
Remote 900 CFM
Number
Included
CTBLOWER-90REM (801641)
Transition
Not Required 3
TRANS-14-10 3
1
1
/
/
4
4
Duct Size
" (83 mm) x 10" (254 mm)
" (83 mm) x 14" (356 mm)
Remote 1200 CFM CTBLOWER-120REM (801642) TRANS-14-10 3 1 / 4 " (83 mm) x 14" (356 mm)
Remote 1500 CFM CTBLOWER-150REM (804701) TRANS-14-10 3 1 / 4 " (83 mm) x 14" (356 mm)
NOTE: Blower configurations are for reference only. Please refer to minimum CFM recommendations for your specific cooking product. Always consult a qualified HVAC Engineer for specific applications.
59
P
R O
S
E R I E S
V
E N T I L A T I O N
R
E C O M M E N D A T I O N S
M I N I M U M C F M R E C O M M E N D A T I O N S
Wall Hoods –
24" (610 mm) Deep R/DF304 R/RT/DF364 R/RT/DF366 R/RT488 R/RT/DF486 R/RT/DF484 R/RT/DF482 R/DF606 R/DF604
W302418
W362418
W422418
600
600 900
900
900
900
W482418
W542418
W602418
W662418
1200
1200
1200
1200
900
900
900
900
1500
1500
1200
1200
Wall Hoods –
27" (686 mm) Deep R/DF304 R/RT/DF364 R/RT/DF366 R/RT488 R/RT/DF486 R/RT/DF484 R/RT/DF482 R/DF606 R/DF604
W302718
W362718
W422718
600
600 900
900
900
900
W482718
W542718
W602718
W662718
1200
1200
1200
1200
900
900
900
900
1500
1500
1200
1200
Wall Hoods –
22" (558 mm) Deep R/DF304 R/RT/DF364 R/RT/DF366 R/RT488 R/RT/DF486 R/RT/DF484 R/RT/DF482 R/DF606 R/DF604
W302210I
W362210I
W362210
600
600
600
900
900
900
900
W422210
W482210
900 900
900 900
NOTE: Do not use a 22" (558 mm) deep wall hood with Wolf Dual Fuel Range, Gas Range and Rangetop models with a charbroiler or griddle.
Island Hoods
I363418
I423418
I543418
I663418
R/DF304 R/RT/DF364 R/RT/DF366 R/RT488 R/RT/DF486 R/RT/DF484 R/RT/DF482 R/DF606 R/DF604
600
600 900 900
1200 1200 900 900
1500 1200
Liners (Power Packs) R/DF304 R/RT/DF364 R/RT/DF366 R/RT488 R/RT/DF486 R/RT/DF484 R/RT/DF482 R/DF606 R/DF604
L282212I 600
L342212
L402212
L462212
L522212
L582212
900
900
900
900
1200
1200
1200
1200
900
900
900
900
1500 1200
NOTE: CFM recommendations are based on total Btu/hr output. Wolf recommends 1 CFM per 100 Btu/hr (.03 kWh). Additional CFM may be required for charbroilers, griddles and long duct runs.
60
P
R O
S
E R I E S
V
E N T I L A T I O N
R
E C O M M E N D A T I O N S
B L O W E R C R O S S - R E F E R E N C E
Wall Hoods – 24" (610 mm) Deep
W302418, W362418 or W422418
W302418, W362418 or W422418
W302418, W362418 or W422418
W302418, W362418 or W422418
W302418, W362418 or W422418
W482418, W542418, W602418 or W662418
W482418, W542418, W602418 or W662418
W482418, W542418, W602418 or W662418
W482418, W542418, W602418 or W662418
NOTE: Transition with backdraft damper included.
Blower
Internal 900 CFM
Remote 600 CFM
Remote 900 CFM
Remote 1200 CFM
Remote 1500 CFM
Internal 1200 CFM
Remote 900 CFM
Remote 1200 CFM
Remote 1500 CFM
Number
WBLOWER-90INT (805086)
Round Duct
10" (254 mm)
Discharge
Vertical
CTBLOWER-60REM (801640) 10" (254 mm) Adjustable
CTBLOWER-90REM (801641) 10" (254 mm) Adjustable
CTBLOWER-120REM (801642) 10" (254 mm) Adjustable
CTBLOWER-150REM (804701) 10" (254 mm) Adjustable
WBLOWER-120INT (804702) 10" (254 mm) Adjustable
CTBLOWER-90REM (801641) 10" (254 mm) Adjustable
CTBLOWER-120REM (801642) 10" (254 mm) Adjustable
CTBLOWER-150REM (804701) 10" (254 mm) Adjustable
Wall Hoods – 27" (686 mm) Deep
W302718, W362718 or W422718
W302718, W362718 or W422718
W302718, W362718 or W422718
W302718, W362718 or W422718
W302718, W362718 or W422718
W482718, W542718, W602718 or W662718
W482718, W542718, W602718 or W662718
W482718, W542718, W602718 or W662718
W482718, W542718, W602718 or W662718
NOTE: Transition with backdraft damper included.
Blower
Internal 900 CFM
Remote 600 CFM
Number
WBLOWER-90INT (805086)
Round Duct
10" (254 mm)
CTBLOWER-60REM (801640) 10" (254 mm)
Discharge
Vertical
Vertical
Remote 900 CFM CTBLOWER-90REM (801641) 10" (254 mm)
Remote 1200 CFM CTBLOWER-120REM (801642) 10" (254 mm)
Remote 1500 CFM CTBLOWER-150REM (804701) 10" (254 mm)
Internal 1200 CFM WBLOWER-120INT (804702) 10" (254 mm)
Remote 900 CFM CTBLOWER-90REM (801641) 10" (254 mm)
Remote 1200 CFM CTBLOWER-120REM (801642) 10" (254 mm)
Remote 1500 CFM CTBLOWER-150REM (804701) 10" (254 mm)
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Wall Hoods – 22" (558 mm) Deep
W302210I or W362210I
W362210, W422210 or W482210
W362210, W422210 or W482210
Blower
Internal 600 CFM
Remote 600 CFM
Remote 900 CFM
Number
Included (805347)
Round Duct
8" (203 mm)
Discharge
Vertical
CTBLOWER-60REM (801640) 8" (203 mm) Adjustable
CTBLOWER-90REM (801641) 8" (203 mm) Adjustable
NOTE: Do not use a 22" (558 mm) deep wall hood with Wolf Dual Fuel Range, Gas Range and Rangetop models with a charbroiler or griddle. Transition with backdraft damper included.
Island Hoods
I363418, I423418, I543418 or I663418
I363418, I423418, I543418 or I663418
I363418, I423418, I543418 or I663418
I363418, I423418, I543418 or I663418
NOTE: Transition with backdraft damper included.
Blower
Internal 1200 CFM
Number
IBLOWER-120INT (804703)
Round Duct Discharge
10" (254 mm) Vertical
Remote 900 CFM CTBLOWER-90REM (801641) 10" (254 mm)
Remote 1200 CFM CTBLOWER-120REM (801642) 10" (254 mm)
Remote 1500 CFM CTBLOWER-150REM (804071) 10" (254 mm)
Vertical
Vertical
Vertical
Liners (Power Packs)
L282212I
Blower
Internal 600 CFM
L342212, L402212, L462212, L522212 or L582212 Internal 1200 CFM
Number
Included (805347)
Round Duct
8" (203 mm)
LBLOWER-120INT (805087) 10" (254 mm)
Discharge
Vertical
Vertical
L342212, L402212, L462212, L522212 or L582212 Remote 900 CFM CTBLOWER-90REM (804641) 10" (254 mm)
L342212, L402212, L462212, L522212 or L582212 Remote 1200 CFM CTBLOWER-120REM (801642) 10" (254 mm)
L342212, L402212, L462212, L522212 or L582212 Remote 1500 CFM CTBLOWER-150REM (804701) 10" (254 mm)
Vertical
Vertical
Vertical
NOTE: Transition with backdraft damper included.
NOTE: Blower configurations are for reference only. Please refer to minimum CFM recommendations for your specific cooking product. Always consult a qualified HVAC Engineer for specific applications.
61
62
W O L F A P P L I A N C E P R O D U C T S
L I M I T E D W A R R A N T Y
R E S I D E N T I A L U S E O N LY
F U L L T W O -Y E A R W A R R A N T Y
For two years from the date of original installation, your Wolf Appliance product warranty covers all parts and labor to repair or replace any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance Company under the above warranty must be performed by Wolf Appliance authorized service representatives, unless otherwise specified by Wolf
Appliance Company. Service will be provided in the home during normal business hours.
L I M I T E D T H I R D T H R O U G H F I F T H Y E A R W A R R A N T Y
From the third through fifth year from the date of original installation, Wolf Appliance Company will repair or replace the following parts that prove to be defective in materials or workmanship. Labor to remove and replace defective parts is not covered. Wolf Appliance Company recommends that you use
Wolf Appliance authorized service representatives to perform such service.
Gas Burners (excluding appearance), Electric Heating Elements, Blower Motors (vent hoods),
Electronic Control Boards and Magnetron Tubes
L I M I T E D L I F E T I M E W A R R A N T Y
For the life of the product, Wolf Appliance Company will repair or replace any BBQ body or BBQ hood which rusts through due to defective material or workmanship. Labor to remove and replace defective parts is not covered. Wolf Appliance Company recommends that you use Wolf Appliance authorized service representatives to perform such service.
T E R M S A P P L I C A B L E T O E A C H W A R R A N T Y
The warranty applies only to products installed for normal residential use. The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES
WHICH WOLF APPLIANCE COMPANY, LLC WILL PROVIDE, EITHER UNDER THIS
WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. WOLF
APPLIANCE COMPANY, LLC WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY OR
ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.
To receive parts and / or service and the name of the Wolf Appliance authorized service representative nearest you; contact Wolf Appliance Company, LLC, P. O. Box 44848, Madison, Wisconsin 53744, call
(800) 332-9513, or check our website; www.wolfappliance.com.
The information and images are the copyright property of Wolf Appliance Company, LLC, an affiliate of Sub-Zero Freezer Company, Inc. Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Wolf Appliance Company, LLC, an affiliate of Sub-Zero Freezer Company, Inc.
© Wolf Appliance Company, LLC all rights reserved.
WDG 803726
W OLF A PPLIANCE C OMPANY , LLC
P. O. Box 44848
•
Madison, WI 53744
•
800-332-9513 www.wolfappliance.com
7/03

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Dual convection logic control system
- Dual Stacked Burner design
- True Simmer
- Sensor cooking
- Melt setting
- Low profile continuous grates
- Deep seamless draw pan
- Three trim options
- Optional wok grate