ADEMCO 4140XM Specifications

ADEMCO 4140XM Specifications
*
N88183/93
2NDEMC0
TABLE OF CONTENTS
SYSTEMOVERVIEW...............................................................................................................................................................................4
Consoles ..................................................................................................................................... ............ ............ ............ ............ ......... 4
Alarms ..................................................................................................................................................................................................5
Fire Protedion ......................................................................................................................................................................................5
Burglary Protection ...............................................................................................................................................................................5
Memory of Alarm .................................. ........................................ ......................................... ...............................................................5
sEcuRlw coDEs .................................................................................................................................................................................r.6
Duress Code ........................................................................................................................................................................................6
Quick Arming ........................................................................................................................................................................................6
Assigning/Changing/Deleting
User Codes (Using the
❑ CODE
Key) ................................ ...............................................................7
ENTRY/EXIT DELAYS ............................................................................................................... ...............................................................8
FIXED WORD DISPLAY CONSOLE SYSTEM STATUS DISPLAYS .......................................................................................................9
SUMMARY OF CONSOLE
CHECKING
BYPASSING
Functions
................................................................................................................................................lO
FOR OPEN ZONES (Using the~READY
PROTECTION
Using The~BYPASS
Key) ...............................................................................................................l2
ZONES ........ ........................................ ......................................... .............................................................l4
Key ..............................................................................................................................................................l4
Quick Bypass .....................................................................................................................................................................................l5
ARMINGPERIMETER
ARMING
ONLY, WITHENTRY
DELAY ON(Using
The~STAY
Key) ..........................................................................l6
PERIMETERONLY,WITH ENTRYDELAYOFF (Using The 7 INSTANT Key) ..... .............................................................l7
ARMING ALL PROTECTION,
ARMING ALL PROTECTION,
DISARMING
WITH ENTRY DELAY ON (Using The 2 AWAY Key) ..........................................................................l8
WITH ENTRY DELAY OFF (Using The 4 MAXIMUM Key) .................................................................l9
THE SYSTEM AND SILENCING
CHIME MODE (Using the~CHIME
ALARMS (Using the 1 OFF Key) ...............................................................................2O
$
Key) ....................................... ......................................................................................................2l
-2-
TABLE OF CONTENTS
(continued)
PANIC KEYS ...........................................................................................................................................................................................22
OUTPUT RELAY OPTIONS ....................................................................................................................................................................23
TEST Key) ...............................................................................................................................24
TESTING THE SYSTEM (Using the
TROUBLE GONDiTIONS ........................................................................................................................................................................26
❑
“Check” and “Battery” Displays ...........................................................................................................................................................26
Power Failure ......................................................................................................................................................................................27
Other Displays .....................................................................................................................................................................................28
FIRE ALARM SYSTEM, IF INSTALLED .................................................................................................................................................29
In Case of Fire Alarm ..........................................................................................................................................................................29
Silencing Fire Alarms ..........................................................................................................................................................................3O
NATIONAL FIRE PROTECTION
EMERGENCY
Evacuation
ASSOCIATION
RECOMMENDATIONS
ON SMOKE DETECTORS
.................................................3l
.................................................................................................................................................................32
QUICK GUIDE TO ALARM SYSTEM
Functions
................................................................................................................................33
SUMMARY OF AUDIBLE/VISUAL
NOTIFICATION
(ALPHA DISPLAY CONSOLES
SUMMARY OF AUDIBLE/VISUAL
NOTIFICATION
(FIXED WORD DISPLAY CONSOLES) ................................................................35
PROTECTION
ZONES LIST ...................................................................................................................................................................36
OWNER’S INSURANCE
PREMIUM
CANADIAN DEPARTMENT
THE LIMITATIONS
CREDIT REQUEST .......................................................................................................................37
OF COMMUNICATIONS
FEDERAL COMMUNICATIONS
SERVICING
............................................................................34
COMMISSION
(DOC) STATEMENT
.........................................................................................39
(FCC) STATEMENTS .................................................................................................4O
OF THIS ALARM SYSTEM .....................................................................................................................................42
lNFORMATION ...................................................................................................................................................................43
WARRAN~
.............................................................................................................................................................................BackCover
This manual is a step-by-step guide that will aquaint you with the system’s features and benefits. It defines the components and their
functions, describes their operation, and instructs you with normal and emergency procedures. Keep this manual in a convenient place
so that you can refer to it as necessary.
-3-
SYSTEM OVERVIEW
General
Congratulations on your ownership of an Ademco Security System. You’ve made a
wise decision in choosing it, for it represents the latest in security protection
technology today, including microcomputer technology to monitor all system status.
Ademco is the world’s largest manufacturer of security systems and millions of
premises are protected by Ademco systems.
Basically, this system offers you three forms of protection: burglary, fire and emergency. Your system may consist of at least one console which provides full control
of system operation, various sensors such as motion detectors and door and
window sensing devices, plus a selected number of strategically placed smoke or
combustion detectors designed to provide early warning in case of fire. Your
system may also have been programmed to automatically transmit alarm or status
messages over the phone lines to a central alarm monitoring station.
Consoles
All system functions are controlled by your console(s). The consoles feature a
telephone style (digital) keypad and a Liquid Crystal Display (LCD) which shows
the nature and location of all occurrences. Their built-in sounder will sound during
alarm and trouble conditions.
The Security System can use either Alpha Display or Fixed Word Display Gonsoles
to perform and display system functions. Unless stated otherwise, all commands
and procedures described herein apply equally to both types of consoles.
Zones
your system’s sensing devices have been assigned to various “zones”. For
example, the sensing device on your Entry/Exit door may have been assigned to
zone 06, sensing devices on windows in the master bedroom to zone 10, and so
on. These zone numbers will appear on the display when an alarm or trouble
condition occurs.
-4-
SYSTEM
(continued)
OVERVIEW
Alarms
When an alarm occurs, both the console and external sounders will sound, and a
message at the console will identify the zone(s) causing the alarm. In addition, if
your system is connected to a central monitoring station, an alarm message will be
sent. To stop the alarm sounding, you simply disarm the system.
Fire Protection
The fire protection portion of your security system (if used) is always on and will
sound an alarm if a fire condition is detected. Refer to the F/RE ALARM SYSTEM
section for important information concerning fire protection, smoke detectors and
planning emergency exit routes from your house.
Burglary Protection
The burglary protection portion of your system must be turned on or “armed”
before it will sense burglary alarm conditions and sound an alarm. Your system can
be armed in one of four modes: STAY,AWAY, INSTANT and MAXIMUM. Refer to
the ARiWNG THE SYSTEM sections for instructions in using these modes of
operation.
Your system also provides a CHIME mode for alerting you to the opening and
closing of doors and windows while the system is disarmed.
Memory Of Alarm
occurs, the console displays the’ number(s) of
the zone(s) that caused the problem, and displays the type of alarm or trouble (ex.
FIRE, ALARM, CHECK). The display remains until it is cleared by entering the
OFF sequence (entering your security code + pressing OFF) twice.
When
an alarm
or trouble
condition
-5-
...—
SECUR9TY CODES
General
At the time of installation, your installer programmed a personal four-digit Master
code, known only to you and yours. This code is used to perform most system
functions, including arming and disarming of the system. As an additional safety
feature, temporary user codes can be assigned (see next page) for use by those
not having a need to know the Master code. Note that the Master code remains in
effect even when other user codes are assigned.
Duress Code
This feature is intended for use when you are forced to disarm or arm the system
under threat. When used, the system will act normally, but can silently notify the
central station of your situation, if that service has been provided. The Duress code
is the same as your user code, except that the last digit is increased by one. For
example, if the normal security code is”1 23 4“, the Duress security code is” 1235.
Important: This code is useful only when connected to a central station. User
codes that end in “9” (ex. 6349) cannot activate a duress alarm (i.e., 6350 is not a
duress alarm code).
Quick Arming
❑
El
Ask your
installer if ‘Quick
Arming” is active
for your system, and if
so, check here,
If your system supports “Quick Arming”, the “#” key can be pressed in place of the
security code when arming the system. The security code is a/ways required,
however, when disarming the system.
-6-
SECURITY
(continued)
To Assign, Change,
or Delete
User Codes
SINGLE DIGIT
USER NUMBERS
Ask your installerwhioh
User Numbersare
available for your system,
and note them here:
m
CODES
1. Enter your Master code and press the CODE key.
2. Enter single-digit User Number for whom a code is to be assigned, changed, or
deleted.
3. If assigning or changing a user’s code, enter the desired 4-digit code for use
by that User Number. The console will beep once.
If de/ethg a user’s code, perform steps 1& 2 and stop. In a few moments the
console will beep once, indicating that the existing code has been deleted.
Important:
s Instruct other users to enter their codes carefully to avoid accidentally entering
the Duress code. If desired, other users can be assigned a code ending in “9”, to
prevent accidental Duress code entry
●
●
Temporary users should not be shown how to use any system function they do
not need to know (e.g., bypassing protection zones).
Be sure user codes do not conflict with any Duress code.
fimmm
TYPICAL CONSOLE
KEYPAD
bmm~”
~1
USE THE CODE KEY
TO ASSIGN
OTHER USER CODES
F,
CT
:,
&
r?l
THESE KEYS NOT PRESENT
ON ALL CONSOLES
m
l--
PNJIC
-9
-7-
<=::NM;:;’
J
ENTRY/EXIT
General Information
DELAYS
Your system has preset time delays, known as exit delay and entry delay. When
you arm your system, exit delay gives you time to leave through the main door
without setting off an alarm. Entry delay gives you time to disarm the system when
you reenter through the main door. The system must be disarmed, however, before
the entry delay period ends, or an alarm will occur. The console will beep slowly
during the entry delay period, reminding you to disarm the system.
You can also arm the system with no entry delay at all by using either INSTANT or
MAXIMUM arming modes. These modes can provide greater security while you
are sleeping or while you are away for extended periods of time.
See your installer for your delay times and record them here:
Exit Delay:
m
seconds
-8-
Entry Delay:
m
seconds
FIXED WORD DISPLAY CONSOLE
SYSTEM
AWAY
STAY
INSTANT
BYPASS
NOT READY
READY
NO AC
AC
CHIME
BAT
ALARM
CHECK
FIRE
STATUS
DISPLAYS
burglaryzones, interior& perimeter, are armed.
Perimeter burglaryzones, such as windows & doors, are armed.
All
Burglary zones armed and entry delay is turned off.
One or more burgla~ protectionzones have been byppssed.
Appears when burglary portion of the system is not ready for arming (due to one or more
open protectionzones).
The burglary system is ready to be armed.
Appears when AC power has been cut off. System is operating on backup battery power.
Appears when AC power is present.
Appears when the CHIME feature is activated.
sensor (if zone number is also shown),
or
Low battery
condition
in a wireless
Low system battery (if no zone number is shown).
Appears when an intrusion has been detected and the system is armed (also appears
during a Fire alarm). Accompanied
by the protection zone ID in alarm.
Appears when a malfunction is discovered in the system at any time or if a fault is detected
in a FIRE zone at any time or in a DAY(Trouble)/NIG HT(Alarm) burglary zone during a
disarmed period. Accompanied by a display of zone number in trouble.
Appears when a fire alarm is present. Accompanied by a display of the zone in alarm.
FIXED
WORD
DISPLAY
-9-
WINDOW
SUMMARY
OF CONSOLE
FUNCTIONS
SEE TYPICAL CONSOLE ON NEXT PAGE
1. DISPLAY WINDOW:
2.
3.
4.
Displays protection zone identification
and system status messages.
OFF KEY*: Disarms the burglary portion of the system,
silences alarms and audible trouble indicators, and clears
visual display after the problem’s correction.
3.
❑
❑ AWAY KEY*: Arms the entire burglary system,
perimeter and interior.
❑ STAY KEY*: Arms the perimeter portion of the burglary
Note:
test procedures.
6.
❑
❑ CHIME
BYFIASS
KEY*:
from being monitored
Removes
individual
by the system.
protection
zones
KEY*: Turns CHIME mode on and off. When on,
the opening of windows or doors while the system is
disarmed will cause a beeping at the Console(s).
KEY: Quick Arm” key permits ARMING of the system
8.
without use of a security code (if so programmed).
9. KEYS O-9: Used to enter your security code(s).
CODE KEY*: Used to assign additional user cnde.s that
10.
be given to other users of the system.
11. B* READY KEY: Used to display open zones.
7.
❑
❑
12.
•iNsTA~T
KEY*:
Arms in manner
similar
to STAY
mode, but without the entry delay feature. Entering via the
main door will cause an instant alarm.
-1o-
On some other consoles there is, instead, a...
POWER INDICATOR: (GREEN) Lit when primary power is
on. If off, system may still be operating, but on its backup
Power
Failure
in TROUBLE
See
battery
power.
CONDITIONS
section.
❑
TEST KEYW: Tests the system and alarm sounder if
THE SYSTEM
section for
disarmed. Refer to the TESTING
KEY*: Arms in manner similar to AWAY
mode, but without the entry delay feature, thus providing
maximum protection. An alarm will occur immediately upon
opening any protection point, including the main door.
4. READY INDICATOR:
(GREEN) Lit when the system is
ready to be armed (no faults present).
system only. Interior protection is not armed, which allows
movement within your house without causing an alarm.
5.
❑ MAXIMUM
ARMED INDICATOR:
(RED) Lit when the system has been
armed (STAY, AWAY, INSTANT or MAXIMUM).
16. INTERNAL SOUNDER: The built-in console sounder mimics
the alarm sounder during alarms, and will also “beep” during
certain system functions. (see Summary of Audible/Visual
15.
Notifications).
*Note:
Keys
1 through
9 each perform
their associated
companion
functions (OFF, AWAY, STAY, etc.) when
preceded
by an entry
of the security
code
(as
described later).
IMPORTANT!: When entering codes and commands, sequentia~
key depressions must be made within 2 seconds of one another.
If 2 seconds elapses without a key depression, the entry is
aborted and must be repeated from its beginning.
CONSOLE
Q
3
Q
2
COVER
(ON THIS MODEL)
SHOWN OPEN ~
-11-
5
?
CHECKING
Using the
Key
❑ R-DY
FOR OPEN ZONES
Before arming your system, all protected doors, windows and other protection
zones must be closed or bypassed (see EIYPASS//VG PROTECT/ON
ZONES
section), otherwise the console will display a “Not Ready” message, and if your
console has a READY indicator light, it will not be lit. The READY key can be used
to display all faulted zones, making it easier for you to secure any open zone.
To display faulted zones, simply press and release the RE~DY key (do not enter
code first). Secure or bypass the zones displayed before arming the system.
A “Ready” message will be displayed when all protection zones have been either
closed or bypassed and the console’s READY indicator light (if present) will be lit.
-12-
(continued)
CHECKING
FOR OPEN ZONES
TYPICAL CONSOLE KEYPAD
d Cmma
h
F-1
TYPICAL DISPIAYS
INDICATING OPEN PROTECTION ZONE
ALPHA DISPUY
FIXED-WORD
DISPfAY
Y
THESE KEYS NOT PRESENT
ON ALL CONSOLES 9
L
PANIC -
-13-
.
BYPASSING
❑
1
Using the
BYPASS Key
LIMITATION ~
The system will not
allow fire zones to be
bypassed.
All bypasses are
removed when an OFF
sequence (security code
plus OFF) is performed.
H
PROTECTION
ZONES
This key is used when you want to arm your system with one or more zones
intentionally unprotected. The system must be disarmed first.
1. Enter your security code and press the BYPASS key
2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.).
Single djgjt zone numbers must be preceded by a zero (e.g. 05, 06).
3. When finished, the console will display a “Bypass” message along with each bypassed zone number. Wait for these zones to be displayed, to confirm their
bypass.
4. Arm the system as usual.
Bypassed zones are unprotected and will not cause an alarm If violated while
your system is armed.
TYPICAL
TYPICAL CONSOLE KEYPAD
THESE KEYS NOT PRESENT
ON ALL CONSOLES ~
l-%
l%
l-%
h
fi
I?5
l.;.,
m
, c:
Q
la
,
DISPLAYS
ALPHA DISPLAY
W:::.:*NES:
~“
d’
●
,C~l
::;;:EN=-
~:~
‘YPASS
BYPASSED ZONES
TO BE DISPLAYED
BEFORE ARMING
QQP
-14-
FIXED-WORD
DISPLAY
BYPASSING PROTECTION
(continued)
Quick Bypass
s
“
ZONES
If your system supports “Quick Bypass”, it allows you to automatically bypass all
open (faulted) zones without having to enter zone numbers individually.
To use this feature, enter your security code, press the BYPASS key, then stop. In
a few moments, all open zones will be displayed along with a “Bypass” message.
Wait for ail bypassed zones to be displayed, then arm the system as usual.
lVPICAl
“READY TO ARM’” DISPLAYS
ALPHA DISPLAY
SYSTEM
CAN NOW
BE ARMED
WITH ZONE(S)
BYPASSED ‘ ‘
-15-
ARMING
PERIMETER
ONLY
WITH ENTRY DELAY ON
Using the Use this key when you are staying home, but expect someone to use
main door later.
1. Enter your security code and press the STAY key.
2. The console will beep three times and wili display the armed message. The
ARMED indicator wili light.
3. The system wiil arm and wiil sound an aiarm if a door or window is opened,
you m-ay otherwise move freeiy throughout the house.
Later arrivals can enter through the main door without causing an aiarm,
they must disarm the system within the entry deiay period.
❑ STAY Key
TYPICAL “ARMED STAV
TYPICAL CONSOLE KEYPAD
‘ THE
THE
BUT
THE
THESE KEYS NOT PRESENT
ON ALL CONSOLES
I
-16-
DISPIAYS
ALPHA DISPLAY
STAY KEY ARMS
PERIMErER,
ALLOWS USE OF
MAIN OOOR
FIXED-WRD
DISPLAY
the
red
but
but
ARMING
PERIMETER
ONLY
WITH ENTRY DELAY OFF
Using the
Key
❑ INSTANT
L3!!z!
ZONES on page 12)
Use this key when you are staying home and do not expect anyone to use
the main door.
1. Enter your security code and press the INSTANT key.
2. The console will beep three times and will display the armed message. The red
ARMED indicator will light.
3. The system will arm and will sound an alarm if a door or window is opened, but
you may otherwise move freely throughout the house.
An alarm will also sound immediately if anyone opens the main door.
TYPICAL “ARMED INSTANT’ DISPLAYS
TYPICAL CONSOLE KEYPAD
ALPHA DISPLAY
EIEIEI
MAXIWM
“m
Carom
THESE KEYS NOT PRESENT
ON ALL CONSOLES
L
PIWIC
‘ THE INSTANT KEY
ARMS THE PERIMETER
(INCLUDING THE MAIN
DOOR), WITH NO
ENTRY DELAY
-
-17-
FIXED-WORD
DISPLAY
ARMING ALL PROTECTION
WITH ENTRY DELAY ON
❑
Using the
AWAY Key
Use this key when no one will be staying home.
1. Enter your security code and press the AWAY key.
2. The console wili beep twice and will disp~ay the armed message.
ARMED indicator will light.
w
The red
3. You may leave through the main door during the exit delay period without
causing an alarm.
After exit delay, the system arms and will sound an alarm if a door or window is
opened, or if any movement is detected inside your house.
You may reenter through
the entry delay period.
the main door, but must disarm the system
within
TYPIOAL “ARMED AWAW DISPLAYS
TYPICAL CONSOLE KEYPAD
~[
~1
.y
~
THE AWAY KEY ARMS
%
M5zm’
1%
m
b
q_mg
m
ALIWA DISPL4Y
~J
W:=’FNM
ALLOWS USE OF THE
::l:’
BUT
PANIC
THESE KEYS NOT PRESENT
ON ALL CONSOLES 3
-18-
FIXED-WORD
DISPLAY
ARMING ALL PROTECTION
WITH ENTRY DELAY OFF
Using the
Key
❑ MAXIMUM
L
BEFORE ARMING,
close all doors
and windows (see
CHECKING
ZONES
FOR
OPEN
on page 12)
Use this key when the premises will be vacant for extended periods of time
such as vacations, etc., or when retiring for the night and no one will be moving
through protected interior areas.
1. Enter your security code and press the MAXIMUM
key.
2. The console will beep twice and will display the armed message,
ARMED indicator will light.
The red
3. You may leave through the main door during the exit delay period without
causing an alarm.
After exit delay, the system arms and will sound an alarm if a door or window is
opened, or if any movement is detected inside your house.
An alarm will sound immediately,
when someone
reenters.
lYPICAL “ARMED MAXIMUM”’ DISPLAYS
TYPICAL CONSOLE KEYPAD
AUWA
dmzlm
gw
INSTANT
b
THESE KEYS NOT PRESENT
ON ALL CONSOLES ~
~
Ccnx
THE MAXIMUM
@&&
Sjfg:~’H
PANIC
-19-
KEY
DISPLAY
DISARM#NG THE SYSTEM AND SILENCING
ALARMS
Using the
OFF Key
1. To disarm the system and silence burglary alarms, enter your security code
and press the OFF key. The Ready message will be displayed and the console
will beep once to confirm that the system is disarmed.
lMPORTAN~
If you return and the main
buralarv sounder is on.
~0 NOT ENTER, bu~
CONTACT THE POLICE
from a nearby safe location.
If you return after an
alarm has occurred and
tha main sounder has
shut itself off, the console
will beep rapidly upon your
entering, indicating that an
alarm has occurred during
your absence.
LEAVE IMMEDIATELY,
and
CONTACT THE POLICE
from a nearby safe location.
To Silence a FIRE alarm, simply press the OFF key. The security code is not
needed to silence FIRE alarms.
❑
See SUMMARY OF AUDIBLE NOTIFICATION section for information which will
help you to distinguish between FIRE and BURGLARY alarm sounds.
2. If an alarm has occurred, and the premises is safe to reenter, note the zone
number displayed on the console and repeat step 1 to restore the Ready
message display (to clear the “Memory of Alarm”). If the Ready message will not
display, go to the displayed zone and remedy the fault (close windows, etc.). If
the fault cannot be remedied, notify the alarm agency.
TYPICAL . CONSOLE
TYPICAL
DfsPLAYs
KEYPAO
ALPHA DISPLAY
~
EIEI
6
!M9TANT
~*
CCOE
CHIME
78
+
mLcElzl
THESE KEYS NOT PRESENT
ON ALL CONSOLES
-20-
FIXE~WORD
TO DISARM SYSTEM:
● ENTER CODE
● PRESS OFF KEY
DISPLAY
CHIME MODE
❑
Using the
CHIME Key
This feature can be used
only while the burglary
system is disarmed.
your system can be set to alert you to the opening of a door or window while it is
disarmed, by using CHIME mode. When activated, three tones will sound at the
Console whenever a door or window is opened. Pressing the READY key will
display the open protection points.
To turn Chime Mode on, enter the security code and press the CHIME key. The
CHIME message will appear.
To turn Chime Mode off, enter the security code and press the CHIME key again.
The CHiME message wili disappear.
TYPICAL
TYPICM
CONSOLE
KEYPAD
“CHIME MODE’’DISPLAYS
ALPHA DISPLAY
Em5HYl
MhXIMUM
mmm
Imzlm’
THESE KEYS NOT PRESENT
ON ALL CONSOLES
-21-
f7XED-WORD
TO TURN CHIME MOOE
OWOFF:
● ENTER CODE
● PRESS
CHIME KEY
DISPLAY
PANIC KEYS
(for
Using
Panic Keys
manually activating
silent antf/or
audible
alarms)
TO INITIATE A PANIC
FUNCTION AT ANY TIME
OF DAY OR NIGHT:
Press both keys of an active
pair at the same time,
or
Press an active lettered key
for at least two seconds.
3
CONSOLE
Your system may have been programmed to use special keys or combinations of
keys to manually activate emergency (panic) functions. The functions that might be
programmed are: Silent Emergency, Audible Emergency, Personal Emergency, and
Fire.
A silent emergency will send a silent alarm signal to the central station, but there
will be no audible alarms or visual displays.
An audible emergency will sound a loud, steady alarm at your console(s) and at
any external sounders that may be connected (ALARM plus a zone number would
also be displayed).
A personal emergency alarm will send an emergency message to the central
station (if connected) and will sound at console(s), but not at external bells or
sirens.
A fire alarm will send a fire alarm message to the central station and will uniquely
sound at console(s) and external bells and sirens (FIRE plus a zone number would
also be displayed).
lvPIcAL
KEYPAD
LEITERED
PANIC
KEYS
(“D” IS
NOT USED)
IN9T
?L(
15m
I
*~#
7
PANIC
THESE KEYS NOT PRESENT
ON ALL CONSOLES
-22-
PAlRED
PANIC
KEYS
I
fTJ&pFJ
PANIC KEYS
PANIC
KEY(S)
SEE YOUR INSTALLER
AND NOTE HERE
THE PANIC KEY FUNCTIONS
PROGRAMMED FOR YOUR SYSTEM
PROGRAMMED
FUNCTION
[1] & [*]
95
[*] & [M
07
[3] & [q
96
[Al
95
KEY [D], IF PRESENT ON YOUR CONSOLE,
OUTPUT
Programmed
Actions
(in response
to
zone
or
activity
manuai
ZONE
NUMBER
IS NOT ACTIVE HERE
RELAY OPTIONS
Ask your installer to provide information on any special system actions that have been
programmed during installation.
STARTED
ACTION
entries)
-23-
BY
STOPPED
BY
TESTING THE SYSTEM
TO BE CONDUCTED
❑
Using the
TEST Key
WEEKLY
The Test key puts your system into Test mode, which allows each protection point
to be checked for proper operation.
1. Disarm the system and close all protected windows, doors, etc. The console’s
READY message should be displayed and the READY indicator (if present)
should be lit.
*
2. Enter your security code and press the TEST key.
3. The outside siren or bell will sound for one second (if it does not, CALL FOR
SERVICE IMMEDIATELY). The consoie wiil sound a singie beep every minute
as a reminder that the system is in Test mode. Each time a protection zone is
fauited (opened), the console shouid sound 3 beeps.
TYPIOAL
TYPICAL OONSOLE KEYPAD
DISPLAYS
ALPHA DISPLAY
tlmm?l
mIN9TANT
Colx
FIXED-WORD
cHIME
Elmlxl
THESE KEYS NOT PRESENT
ON ALL CONSOLES ~
-24-
USE THE TEST KEY TO
TEST YOUR SYSTEM
WEEKLY
DISPLAY
(continued)
TESTING THE SYSTEM
Testing Your 1. Open and close each protected door and window in turn and listen for the
required sound (3 beeps). The identification of each faulted protection point
System
should appear on the display.
A
2, Walk in front of any interior motion detectors (if used) and listen for the required
sound as movement is detected. The identification of the detector should appear
on the display when it is activated.
Note: Wireless units will send signals out only if they have been inactive for 3
minutes.
3. Follow the manufacturer’s instructions to test ail smoke detectors, to ensure that
all are functioning properly. The identification of each detector should appear on
the display when each is activated.
4. After all protection points have been checked and restored, there should be no
zone identification numbers displayed. If a problem is experienced with any
protection point (no confirming sounds, no dispiay), CALL FOR SERViCE
IMMEDIATELY.
5. Turn off the Test mode by entering the security code and pressing the OFF key.
-25-
TROUBLE
CONDITIONS
“Check” and Tile word CHECK on the console’s display, accompanied
“Battery” Displays console, indicates a trouble condition in the system.
To siience the beeping for these conditions,
by a “beeping”
at the
press any key.
1.A dispiay of “CHECK” and one or more zone numbers indicates that a
problem exists with the displayed zone(s) and requires your attention. If the
CHECK dispiay reiates to a fire zone, CALL FOR SERVICE immediately.
Determine if the zone(s) dispiayed are intact and make them so if they are not. if
the probiem has been corrected, the dispiay can be cieared if you enter the OFF
sequence (user code pius OFF key) twice. if the dispiay persists, CALL FOR
SERViCE immediately.
Not all systems
2.if there are wireiess sensors* in your system, the CHECK condition may aiso
be caused by some change in the environment that prevents the receiver from
hearing a particular sensor. CALL FOR SERVICE IMMEDIATELY if this occurs.
Lii2il
●
TYPICAL “CHECK” DISPIAYS
IF YOU CANNOT
CORRECT A
“CHECK”
DISPIAY, CALL
FOR SERVICE
-26-
(continued)
TROUBLE
CONDITIONS
3. A dispiay of “BAT” with no zone number indicates that the main standby
battery in your control is weak. if this condition persists for more than one
day (with AC present), CALL FOR SERViCE.
4. A dispiay of “BAT” with a zone number
the Consoie indicates that a iow battery
displayed(zone “00” indicates a wireless
yourseif, or CALL FOR SERViCE. If the
a CHECK display may occur.
and a once per minute “beeping” at
condition exists in the wireless sensor
keypad). Either repiace the battery
battery is not replaced within 30 days,
Some wireless sensors contain non-replaceable long-life battery which requires
replacement of the entire unit at the end of battery iife (e.g., 5802 Pendant and
5802CP Belt Clip Personai Emergency Transmitters and 5803 Wireless Key
Transmitters).
Power Failure
If them is no consoie dispiay at aii, and the POWER indicator (if present) is
not iit, operating power for the system has stopped and the system is inoperative.
CALL FOR SERViCE immediately.
if the message
“AC LOSS” or “NO AC” is dispiayed,
and the POWER
indicator (if present) is off, the Console is operating on battery power only. If only
some lights are out on the premises, check circuit breakers and fuses and reset or
replace as necessary. CALL FOR SERViCE iMMEDIATELY if AC power cannot
be restored.
-27-
TROUBLE
(continued)
Other Displays
Fixed Word
Consoles
Partitioned
B
System
CONDITIONS
If this remains displayed for more than 1 minute, your system is disabled.
CALL FOR SERVICE IMMEDIATELY.
cc: The system is in communication with the central station for change of function
or status verification. If this message persists for more than 10 minutes,
CALL YOUR SERVICE COMPANY.
FC: A communication failure has occurred. CALL FOR SERVICE IMMEDIATELY.
OC: The console is not receiving signals from the control panel and sees an open
circuit. If this message persists for more than 10 minutes, CALL YOUR
SERVICE COMPANY.
dl:
If your system is part of a Partitioned System, it can share one physical alarm
system between two different users, each with their own requirements (e.g., the
occupants of a two family house). When so-configured, each partition operates
independently of the other, but from time to time display messages may appear
temporarily on a console which indicate the other partition is in use (e.g., during
testing by an installer). Do not be concerned. This is normal.
FOR SERVICING
INFORMATION,
SEE PAGE 43
-28-
F#RE ALARM SYSTEM
IF INSTALLED
General
Your fire alarm system (if installed) is on 24 hours a day, for continuous protection.
In the event of an emergency, the strategically located smoke and heat detectors
will automatically send signals to your system, triggering a loud, interrupted sound
from the Console. An interrupted sound will also be produced by optional exterior
sounders. A FIRE message will appear at your Console and remain on until you
silence the alarm.
In Case Of
Fire Alarm
1. Should you become aware of a fire emergency before your detectors sense the
problem, go to your nearest Console and manually initiate an alarm by pressing
the panic key pair assigned as FIRE emergency (if programmed by the installer)
as indicated on page 22.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify your local Fire
Department immediately.
4. If no flames or smoke are apparent, investigate the cause of the alarm. The
zone number(s) of the zone(s) in an alarm condition will be displayed at the
Console.
-29-
(continued)
FIRE ALARM SYSTEM
IF INSTALLED
Silencing
Fire Alarms
1. Silence the alarm by pressing the OFF key (security code not needed to silence
fire alarms). To clear the display, enter your code and press the OFF key again
(Memory of Alarm).
2. If the Console does not indicate a READY condition after the second OFF
sequence, press the READY key to display the zone(s) that are faulted. Be sure
to check that smoke detectors are not responding to smoke or heat producing
objects in their vicinity. Should this be the case, eliminate the source of heat or
smoke.
3. If this does not remedy the problem, there may still be smoke in the detector.
Clear it by fanning the detector for about 30 seconds.
4. When the problem has been corrected, clear the display by entering your code
and pressing the OFF key.
r
“Approval of the panel’s burglar alarm
functions does not fall within the
(Cahforma) State Fire Marshals
-30-
NATIONAL FIRE PROTECTION ASSOCIATION
RECOMMENDATIONS
ON SMOKE DETECTORS
General
With regard to the number and placement of smoke/heat detectors, we subscribe to
the recommendations
contained in the National Fire Protection Association’s
Standard #74 noted below.
Early warning fire detection is best achieved by the installation of fire detection
equipment in all rooms and areas of the household as follows: A smoke detector
installed outside of each separate sleeping area, in the immediate vicinity of the
bedrooms and on each additional story of the family living unit, including
basements and excluding crawl spaces and unfinished attics.
In addition, it is recommended that the householder consider the use of heat or
smoke detectors in the living room, dining room, bedroom(s), kitchen, hallway(s),
attic, furnace room, utility and storage rooms, basements and attached garages.
BEST RESIDENTIAL
DETECTOR PLACEMENT
BETWEEN BEDROOMS
AND REST OF HOUSE
—
■ Snc+amat-k
o
MilmmmlW.tlm
SfmL-kblac!c- !u MfMiial
A He= A5ivad D*-.
MAXIMUM FLOOR
COVERAGEDETECTORS AT
TOP OF
STAIRWELLS
LWG W
-31-
meaim
EMERGENCY
Steps to Safety
Evacuation
Establish and regularly practice a plan of escape in the event of fire. The following
steps are recommended by the National Fire Protection Association:
1. Plan on your detector or your interior and/or exterior sounders warning all occupants.
2. Determine two means of escape from each room. One path of escape should
lead to the door that permits normal exit from the building. The other may be a
window, should your path be unpassable. Station an escape ladder at such
windows if there is a long drop to the ground.
3. Sketch a floor plan of the building. Show windows, doors, stairs and rooftops
that can be used to escape. Indicate escape routes for each room. Keep these
routes free from obstruction and post copies of the escape routes in every room.
4. Assure that all bedroom doors are shut while you are asleep. This will prevent
deadly smoke from entering while you escape.
5. Try the door. If the door is hot, check your alternate escape route. If the door is
cool, open it cautiously. Be prepared to slam the door if smoke or heat rushes in.
rMci–
6. Crawl in the smoke and hold your breath.
7. Escape quickly; don’t panic.
8. Establish a common meeting place outdoors, away from your house, where
everyone can meet and then take steps to contact the authorities and account
for those missing. Choose someone to assure that nobody returns to the house
— many die going back.
-32-
QUICK GUIDE TO ALARM SYSTEM
FUNCTIONS
FUNCTION
PROCEDURE
COMMENTS
Check Zones
Press READY key.
To view faulted zones when system not ready.
Arm System
Enter coda. Press arming key desired:
AWAY, STAY, INSTANTI MAXIMUM)
Arms system in mode selected.
Quick Arm
(if programmed)
Press #. Press arming key desired:
(AWAY, STAY, INSTANT, MAXIMUM)
Arms system in mode selected, quickly and without use of code.
Bypass Zone(s)
Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use
2-digit entries).
Bypassed zones are unprotected and will not cause an alarm if
violated.
Quick Bypass
(if programmed)
Enter code. Press BYPASS key.
Bypasses all faulted zones automatically.
Enter code. Press OFF key.
Press OFF key.
Press any key,
Also disarms system. Memory of alarm remains until cleared.
Memory of Alarm remains until cleared.
Determine cause. Sea Page 26.
Sllenca Sounders
Burgla~:
Fire:
“Check”:
I
Disarm Svstem
Enter code. Press OFF kev.
Also silences sounders. Memow of alarm remains until cleared.
Clear Alarm
Memory
After disarming, enter code again.
Press OFF key again.
Console will beep rapidly upon entry if alarm has occurred.
Alarm display will remain upon disarming until cleared
Duress
(if connected to
central station)
Arm or disarm “normally”,
but with 4th digit of code increased by”1 .“
Performs desired action and sends silent alarm to central station.
Panic Alarms
(as programmed)
Press key [A], [B], or [C] for at least 2 sec.,
(if no A,B, or C on your console)
press keys [1] & [*], or [*] & [#], or
[3] & [#], both at same time.
See Page 22 for functions programmed for your system.
Chime Mode
To turn ON or OFF
CHIME key.
Console will sound if doors or windows are violated while system is
disarmed and chime mode is ON.
Test Mode
I
Enter code. Press
To turn ON. Enter code. Press TEST key.
To turn OFF Enter code. Press OFF key.
-33-
Tests alarm sounder and allows sensors to be tested.
SUMMARY
OF AUDIBLEAIISUAL
(ALPHA
SOUND
Ouu lNIEHHUPlkD’
CAUSE
NOTIFICATION
DISPLAY CONSOLES)
DISPLAY
scrlptor of zone in alarm IS displayed.
lHt AL4HM
Consoie & External
LOUD, CONTINUOUS
Console & External
BURGLARY/AUDIBLE
EMERGENCY ALARM
ALARM k displayed; descriptor of zone in alarm is also displayed.
ONE SHORT BEEP
(not repeated)
Console only
a. SYSTEM DISARM
b. SYSTEM ARMING ATTEMPT
WITH AN OPEN ZONE
c, BYPASS VERIFY
a. DISARMED/READY TO ARM is displayed. Green READY indicator
(if present) is lit.
b. The number and descriptor of the open protection zone is displayed.
Green READY indicator (if present) is not lit.
c. Numbers and descriptors of the bypassed protection zones are
displayed (One beep is heard for each zone displayed). Subsequently,
the following is displayed: DISARMED BYPASS Ready to Arm
ONE SHORT BEEP
(Once everv 60 seconds)
Console only
SYSTEM
Open Zone identifications will appear.
ONE BEEP every 60 sec.
Console only
a. LOW BATTERY AT A XMTR
b. SYSTEM MAIN BAIT. WEAK
c. TROUBLE
TWO SHORT BEEPS
Console only
ARM AWAY OR MAXIMUM
THREE SHORT BEEPS
Console only
a, ARM STAY OR INSTANT
IS IN TEST MODE
b. LO BAT displayedwith no transmitterdescription.
c. CHECK displayed. Descriptorof troubledprotectionzone is displayed.
ARMED AWAY or ARMED MAXIMUM is displayed. Red ARMED
indicator is lit.
b, ZONE OPENED WHILE SYSTEM IS IN CHIME MODE
c. ZONE OPENED WHILE SYSTEM IS IN TEST MODE
RAPID BEEPING
Console Only
SLOW BEEPING
Console onlv
a. LO BAT displayedwithdescriptionof transmitter.
MEMORY OF AIARM
ENTRY DEIAY WARNING
f bell is used as external sounder, fire alarm is pulsed rin ; bur~
Iote:Also see Power Failure under TROUBLE CONDITl~NS 01
a. ARMED STAY or ARMED INSTANT ZONE BYPASSED
is displayed. Red ARMED indicatoris lit.
b. CHIME displayed. Pressing*/READY key will displaydescriptorof opened
zone.
c. Open protection zone descriptor is displayed.
FIRE or ALARM is displayed; descriptor of zone in alarm is displayed.
~
delay time without disarming causes alarm.
-y/audible emergency is steady ring.
age 27.
-34-
SUMMARY
OF AUDIBLE/VISUAL
(FIXED
WORD
DISPLAY
NOTIFICATION
CONSOLES]
SOUND
CAUSE
DISPLAY
LOUD, lNTERRUPTEfY
Console & External
FIRE ALARM
FIRE and ALARM are displayed; protection zone in alarm is displayed.
LOUD. CONTINUOUS
Console & External
BURGLARYIAUDIBLE
EMERGENCY ALARM
AfARM
ONE SHORT BEEP
(not repeated)
Console only
a. SYSTEM DISARM
b. SYSTEM ARMING AlTEMPT
WITH AN OPEN ZONE
c. BYPASS VERIFY
a. Only READY displayed. Green READY indicator (if present) is lit.
b. NOT READY is displayed, open protection zone number is displayed.
Green READY indicator (if present) is not lit.
c. The bypassed protection zone numbers are displayed. (Ona beep for each
number discdaved,) BYPASS displayed.
ONE SHORT BEEP
(Once every 60 secmds)
Console only
SYSTEM
Open Zone identifications will appear,
ONE BEEP every 60 sac
Console only
a. LOW BAITERY AT A XMTR
b. SYSTEM MAIN BAIT. WEAK
c. TROUBLE
a. BAT displayed with ID number of transmitter.
b. BAT displayed’with no transmitter ID.
c. CHECK displayed. Troubled protection zone is displayed.
TWO SHORT BEEPS
Console only
ARM AWAY OR MAXIMUM
AWAY and (if MAXIMUM) INSTANT are displayed
indicator is lit.
THREE SHORT BEEPS
Console only
a. ARM STAY OR INSTANT
b. ZONE OPENED WHILE SYSTEM IS IN CHIME MODE
c. ZONE OPENED WHILE SYS-
a. STAY and (if INSTANT) INSTANT are displayed. Red ARMED indicator is
b. CHIME displayed, Pressing */READY key will display opened zone.
IS IN TEST MODE
is displayed; protection zone in alarm is also displayed.
c. Open protection zone number is displayed.
TEM IS IN TEST MODE
RAPID BEEPING
Console only
MEMORY
OF ALARM
SLOW BEEPING
Console onlv
ENTRY DELAY WARNING
FIRE and/or AfARM
is displayed; zone in alarm is displayed.
None during delay; Exceeding the delay time without disarming causes alarm,
If bell is used as external sounder, fire alarm is pulsed rinSJ bur{ ry/audible emergency is steady ring.
Iote: Also see Power FaikIra under TROUBLE CONDITI NS 01 age 27.
-35-
PROTECTION
ZONES LIST
One or more sensing devices will have been assigned by the installer of your alarm system to each of the various
rotection zones in your system (although not every zone number cm be used). For example, the sensing device on your
E ntry/Exit door may have been assigned to zone 06, sensing devices on windows in the master bedroom to zone 10, and
so on.
Zone numbers 07, 95 and 96 represent Console Keypad “Panic” alarm functions assigned by the installer (see Page 22).
Zone numbers 08 and 09 are reserved for Duress and Tamper signal reporting to the central station.
This chart may be used to record the specific zone number assignments for your system. Your installer will assist you in
recording this information.
Protection
Zone
Description
Zone
ZONE
DESCRIPTIONS
Zone
Description
Description
Zone
01
17
34
51
02
18
35
52
03
19
36
53
04
20
37
54
05
21
38
55
06
22
39
56
07
Key B (or: s & #) Panic
23
40
57
24
41
58
Description
08
-Duress-
25
42
59
09
-Tamper–
26
43
60
10
27
44
61
11
28
45
62
12
29
46
63
13
30
47
95
Key A (or 1 & ~) Panic
14
31
4a
15
32
49
96
Key C (or 3 & #) Panic
16
33
50
-36-
OWNER’S INSURANCE PREMIUM
CREDIT REQUEST
IS form should be completed and forwarded to your homeowner’s insurance carrier for possible premium credit.
GENERAL lNFORMAllON:
Insured’s Name and Address:
Policy No.:
Insuranoe Company:
ADEMCO System:
4111 XM
Type of Alarm:
~
via30
(circle one)
Q Fire
Burglary
~ Both
Serviced by:
Installed by:
NOTIFIES
(Ineert
Local Sounding
name
name
address
address
B for Burglary,
Device
F for Fire, where
appropriate):
Fire Dept
Police Dept.
Name and Address:
POWERED BY: A.C. Wdh Rechargeable Power Supply
TESTING:
~ Quarterly,
~ Monthly,
~ Weekly,
~ Other
continuedon otherside
-37-
Central Station
OWNER’S INSURANCE
CREDIT REQUEST
E. SMOKE DETECTOR
PREMIUM
(cont.)
LOCATIONS:
~
Furnace Room
~
Kitchen
~
Bedrooms
~
Attic
~
Basement
~
Living Room
~
Dining Room
~
Hall
~
All Exterior Doors
F. BURGLARY
DETECTING
DEVICE
LOCATIONS:
~
Front Door
~
Basement Door
~
Rear Door
~
1st Floor Windows
~
All windows
~
Interior Locations
~
All Accessible Openings, Including Skylights, Air Conditioners and Vents
S. ADDITIONAL
PERTINENT
INFORMATION:
Date:
Signature:
-3B
-
GANAUIAN
DEF=TWISN
1 UF
GUMIVtUNIGATIUN~
~DUGJ STATEMENT_
NOTICE
The Canadian ,Department of Communications label identifies certified equipment. This certification means that the equipment meets certain
telecomm,umcations network protectwe, operational and safety requirements. The Department does not guarantee the equipment WIII operate to the
user’s S.atlsfactlon.
Bafo~e installing this equipment, users should ensure that it is permissible to be cannected to the facilities of the Io,cal [email protected]@ions compan .
me equipment must also be mstallad using an acceptable .rnethod of connecbon. In some cases, the company’s msdsr wrong assorxated with a sm e
Itne [email protected] may be extended by means of Cerbfled ,connector, assembly (@dephone extension cord). The customer should be aware tl?!l
oomdlance with the above condrbons mav not rmvent demadabon of serwce m some Wuabons.
[email protected] to certified
e qipment should be-mak
by an au%orized Canarjian maintenance facili
rn~~~~~~n~ser
to%s equipment, or eq.npment malfunctions, may ffwe the telWommunim%o%~%;j%jLWfi~7~uJP%S~%~$%J~JJ
Users should ensure for their own protection @ratthe electrical round connections of the power utility, telephone lines and internal metallic water pips
system, If present, are connected together. Tfm precaution may% e parbcularly Important m rural areas.
Caution: User should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician,
as appropriate.
_(~N)
assignqdtoeachte~inal
cfevicedenotes the ~rcentageofthp
[email protected] load to,beconn,ectad toatelephoneloop
which isusecfby
wce o rave t overloading. The terrnmabon on a loop may mnsmt of any combtnatlon of dewces subject only to the requwament that the total of
tie Load ~um ers of afl the devices does not exceed 100.
Avis
L%tiquette du ministbre des Communications du Canada identifie Ie mab$riel homologu6. Cette 6tiquefte certifie que Ie mat6riel est conforme ~
cartames normes de protection, dexploitatfon et de s6curit6 des r6seaux da tdt%communicalions, Le ministf%a n’assure toutefois pas que Ie matt%iel
fonctionnera A la satisfaction da l’utilisateur.
Avant dlnstaller ce mat6riel, I’utilisateur doit S.’assurerqu’il est perrnis de Ie raccorder aux installations da I’entreprise locale de t~lkommunications. Le
mat6riel doit 6galement ~tre instal16 en suivant une m&hcde accept6e de racmrdament. Dans certains ces, Ies fils intt%eurs de I’entreprise utilisr$s
pour un service individual A la Iigne unique peuvent etre prolong6s au moyen d’un dispositif homologu6 de raccordement (cordon prolongateur
Wtlphonique interne). L’abonne ne doit pas oublier qu’il est possible que la conformit6 aux condlbons 6nonc6es ci-dessus n’emp~che pas la
degradation du service clans certaines situations. Actuellement, Ies en,treprises de t616communications ne permettent pas que I’on raccorde Ieu!
mat6riel aux prises dabonm$s, sauf dens Ies cas pracis prt%us par Ies tanfs particuhers da ces entreprises.
vent r%re etfectrkrs
s un centre dentretien canadien autori S6 dr%ign6 par Ie fourniskeur. La compagnie
Les reparations du mat6riel homol
de t616communications rut ,brna%$ r A‘dI’utilisateur de d6bran r er un appareil A la suite de reparations ou de modifications effectu6es par I’utihsateuf
ou h cause de mauvais oncbonnement.
Pour sa propre protection, I’utilisateur doit s’assurer que tous Ies fils de mise en tarre de la source denergie electrique, des Iignes t61ephoniques de
n%eau de conduites d’eau, s’il y en a, soient raccorck% ensemble. Cette precaution est particrdierement importance clans Ies r6gions rurales.
Avsrtisssmsnt: L’utilisateur ne doit as tenter de faire ces raccordaments lui-m6me; ii doit avoir recours ~ un service d’inspection des installations
61ectriques, ou A un 61ectnclen, selon ~ Cas.
,.
(IC assignt+ ~ chaque dis sitif terminal pour 6viter toute surcharge indique Ie ~ourcentage de la charge totale qui peut etre
) mdca da
raczord6 A un
-J circuit t 16phonique ferm6 utIIIs
“r par ce dispositif. La terminaison du circmt ferm6 peut etre constitu~e de n“importe quelle mmblnaison
de dispositifs, pourvu que la somme des indices da charge de I’ensemble des dispositifs ne d6passe pas 100.
-39-
UL NOTICE:
FEDERAL
This is a “Grade
COMMUNICATIONS
A“ ‘Residential
COMMISSION
System.
(FCC) Part 1S STATEMENT
This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following
statement for your information:
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, may cause interference to radio and television reception. It has been t pe tested and found to comply with
the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC & ules, which are desi ned to provide
reasonable protection against s~h interference in a residential installation. However, there is no guarantee that inte 1?erence will not
occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
c If using an indoor antenna, have a quality outdoor antenna installed.
● Reorient the receiving antenna until interference
is reduced or eliminated.
● Move the radio or television receiver away from the receiver/control.
● Move the antenna
leads away from any wire runs to the receiverkontrol.
9 Plug the receiverkcmtrol into a different outlet so that it and the radio or television receiver are on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user or
installer may find the following booklet prepared by the Federal Communications Commission helpful:
“interference Handbook”
This booklet is available from the U.S. Government Printing Office, Washington, DC 20402.
The user shall not make any changes or modifications
to the equipment unless authorized
by the Installation
Manual.
Unauthorized
changes or modifications muld void the user’s authority to ooarate the eauiDment.
IN THE EVENT OF TELEPHONE
OPERATIONAL
Instructions
or User’s
PROBLEMS
In the event of telephone ocwrational rxoblems, disconnect the control by removina the DIUUfrom the RJ31 X wall iack. We recommend
that your certified” installer demonstrate disconnecting the phones on installfiion of the system. Do not disconnect the phone
connection inside the control/communicator. Doing so will result in the loss of your phone lines. If the regular phone works correctly
after the control/communicator has been disconnected from the phone lines, the control/communicator has a problem and should be
returned for repair. If upon disconnection of the controlkommunicator, there IS still a problem on the line, notify the telephone company
that they have a problem and request prompt repair service. The user may not under any circumstances (in or out of warranty) attempt
any service or repairs to the system. It must be returned to the factory or an authorized service agency for all repairs.
-40-
FEDERAL COMMUNICATIONS
COMMISSION (FCC] Part 68 STATEMENT
This equipment complies with Parl 68 of the FCC rules. On the front cover of this equipment is a label that contains, among other
information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must
be provided to the telephone company.
This equipment uses the following jacks: An RJ31 X is used to connect this equipment to the telephone network.
The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the
telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total
RENs, contact the telephone company to determine the maximum REN for the calling area.
If this equipment causes harm to the telephone network? the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice IS not practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the
equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications
in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact the manufacturer for repair and warranty information. If the trouble is
causing harm to the telephone network, the telephone company may request you remove the equipment from the network until the
problem is resolved.
There are no user serviceable components in this product, and all necessary repairs must be made by the manufacturer. Other repair
methods may invalidate the FCC registration on this product.
This equipment cannot be used on telephone company-provided coin service. Connection to Party Line Service is subject to state
tariffs,
This equipment is hearing-aid compatible.
When programming or making test calls to an emergency number, briefly explain to the dispatcher the reason for the call. Perform
such activities in the off-peak hours; such as early morning or late evening.
-41-
WARNING!
THE LIMITATIONS OF THIS ALARM
SYSTEM
While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other
emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons.
For example:
● Intruders
may ain access through unprotected openings or have the technical sophistication to bypass an alarm sensor or
disconnect an a?arm warning device.
● Intrusion detectors
(e.g. passive infrared detectors), smoke detectors, and many other sensing devices will not work without power.
Battery operated devices will not work without batteries, with dead batteries, or if the batteries are not put in properly. Devices
powered solely by AC will not work if their AC power supply is cut off for any reason, however briefly.
. Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm receiver. Even if the signal
path has been recently checked during a weekly test, blockage can occur if a metal object is moved into the path.
. A user may not be able to reach a panic or emergency button quickly enough.
● While
smoke detectors have played a key role in reducing residential fire deaths in the United States, they may not activate or
~~;wly
warrrmg for avanetyof reasons in as many as 35°/0 of all fires, according to data published by the Federal Emer ency
ent Agency. Some of the reasons smoke detectors used in conpnction with this System may not work are as foi’lows.
Smoke detectors may have been improperly installed and positioned. Smoke detectors may not sense fires that start where smoke
cannot reach the detectors, such as in chimneys, in walls, or roofs, or on the other side of closed doors. Smoke detectors also may
not sense a fire on another level of a residence or building. A second floor detector, for example, may not sense a first floor or
basement fire. Moreover, smoke detectors have sensing limitations. No smoke detector can sense every kind of fire every time. In
general, detectors may not always warn about fires caused by carelessness and safety hazards like smoking in bed, violent
explosions, escaping gas, improper storage of flammable materials, overloaded electrical circuits, children playing with matches, or
arson. De~nding upon the nature of the fire and/or the locations of the smoke detectors, the detector, even if it operates as
anticipate , may not provide sufficient warning to allow all occupants to escape in time to prevent injury or death.
= Passive Infrared Motion Deteqtors can only detect intrusion within the designed ranges as diagramed
in their installation manual.
Passive Infrared Detectors do not provide volumetric area protection. They do crest e multiple beams of protection, and intrusion can
onl be detected in unobstructed areas covered by those beams. They cannot detect motion or intrusion that takes place behind
wa rIs, ceiling:, fleas, closed doors! glass partitions, glass doors, or windows. Mechanical tampering, masking, painting or spraying
of any material on the mirrors, windows or any part of the optical system can reduce their detection ability. Passive Infrared
Detectors sense changes in temperature; however, as the ambient temperature of protected area approaches the temperature range
of 90° to 105°F, the detection performance can decrease.
(wntirrued)
-42-
(continued)
WARNING! TNE LIMITATIONS
OF TNIS ALARM SYSTEM
Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are located on the other
side of closed or partly open doors. If warning devices sound on a different level of the residence from the bedrooms, then they are
less likely to waken or alert people inside the bedrooms. Even persons who are awake may not hear the warning if the alarm is
muffled from a stereo, radio, air cmdkioner or other appliance, or by passing traffic. Finally, alarm warning devices, however loud,
may not warn hearing-impaired people or waken deep sleepers.
c Telephone lines needed to transmit alarm si nals from a premises to a central monitoring station may be out of service or
temporarily out of service. Telephone lines are a7so subject to compromise by sophisticated intruders.
● Even if the system responds to the emergency
as intended, however, occupants may have insufficient time to protect themselves
from the situation. In the case of a monitored alarm system, authorities may not respond appropriately.
● This equipment,
like other electrical devices, is sub”ect to component failure. Even though this equipment is designed to last as
long as 10 years, the electronic components could fal“{at any time.
The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate maintenance. This
alarm system should be tested weekly to make sure all sensors and transmitters are working properly.
Wireless transmitters (used with some systems) are designed to provide long battery life under normal operating conditions.
Longevity of batteries may be as much as 4 to 7 ears, depending on the environment, usa?e, and the specific wireless device
being used. External factors such as humidi ,. hig or low temperatures, as well as large swings in temperature, may all reduce
the actual battery life in a iven installation. 0 hls wireless system, however, can identify a true low battery situation, thus allowing
time to arrange a change o7 battety to maintain protection for that given point within the system.
Installing an alarm system may make one eli ible for lower insurance rates, but an alarm system is not a substitute for insurance.
Homeowners, property owners and renters sf ould continue to act prudently in protecting themselves and continue to insure their
lives and property.
We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved ones
to learn about these developments
●
SERVICING
INFORMATION
service representative
is the person best qualified to service your alarm system. Arranging
a regular program with him is advisable. Your local service representative is:
Your local authorized
PHONE:
NAME:
-43-
Alarm Device Manufacturing Company, a Division of Pittway Corporation, and its divisions, subsidiaries and affiliates (“Seller”),
165 Eileen Way, Syosset, New York 11791, warrants Its security equipment (the “product”) to be free from defects m materials and
workmanship for one year from date of original purchase, under normal use and service. Seller’s obligation is limited to repairing or
replacing, at its option, free of charge for parts, labor, or transportation, any product proven to be defective in materials or
workmanship under normal use and service. Seller shall have no obligation under this warranty or otherwise if the product is
altered or improperly repaired or serviced by anyone other than the Seller. In case of defect, contact the security professional who
installed and maintains your security equipment or the Seller for product repair.
This one
ear Limited Warrant
is in lieu of all other express warranties, obli ations or liabilities. THERE ARE NO EXPRESS
WARRAN\lES,
WHICH EXTE~D BEYOND THE FACE HEREOF. ANY lMPLhED WARRANTIES, OBLIGATIONS OR LIABILITIES MADE BY SELLER IN CONNECTION
WITH THIS PRODUCT,
INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, ARE LIMITED IN DURATION TO A PERIOD
OF ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. ANY ACTION FOR BREACH OF ANY WARRANTY, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, MUST BE BROUGHT WITHIN 12 MONTHS FROM
DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR incidental
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY
OTHER BASIS OF LIABILITY WHATSOEVER,
EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER’S OWN
NEGLIGENCE OR FAULT. Some states do not allow limitation on how Ions an imtdied warrantv lasts or the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusio; may not apply to Y6U.
Seller does not represent that the product may not be compromised or circumvented; that the product will prevent any personal
injury or property loss by burglary, robbery, fire or otherwise; -or ?hat the product WIII in all cases provide adequate warning or
protection. Buyer understands that a properly installed and mamtamed alarm may only reduce the risk of a burglary, robbery, fire
or other events occurring without providing an alarm, but it is not insurance or a uarantee that such will not occur or that there will
be no personal injury or pro~erty loss as a result. CONSEQUENTLY,
SE t LER SHALL HAVE NO LIABILITY FOR ANY
PERSONAL INJURY, PRO E W DAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAlLED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD LIABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLER’S MAXIMUM LlABILITY SHALL NOT IN ANY CASE EXCEED THE PURCHASE
PRICE OF THE PRODUCT.
WHICH SHALL BE THE
COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. This waryanty gives you specific legal rights, and you may also have
other riahts which varv from state to state. No increase or alteration, written or verbal, to this warrantv is authorized,
ADEMCO
A Division of Pittway Corporation
165 Eileen Way, Syosset,
N6618 3/93
New York 11791
Copyright @ 1993 PITTVVAY CORPORATION
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement