Eminent | EM8031 | OVERVIEW AND MANAGEMENT OF NETWORK LAYER IP

OVERVIEW AND MANAGEMENT OF NETWORK LAYER IP
OVERVIEW AND MANAGEMENT OF NETWORK LAYER
IP management with guaranteed cost savings
Within the data center world there has been spoken for years about Data Center Infrastructure Management (DCIM) systems that have to create insight in the infrastructure. An
important element of this is the ability to manage the physical network layer.
The MIIM™ Advanced Physical Layer Management monitoring system by Molex Premise
Networks is a unique system that actually reduces costs by providing insight, overview and
management of the physical network layer. MIIM is not expensive, it is universal (standard
RJ45), provides insight in the complete cable infrastructure including equipment from anywhere around the world, has an open software platform that can be generally integrated
and is applicable to both existing and new networks. As a result, the average Return on
Investment (ROI) is below 2 years.
MIIM ensures that IT investments improve
operational performance, creating a
healthy organization and make the most
from a network, people and budgets.
A higher productivity
You can manage all Moves, Adds and
Changes from one location and anywhere
in the world. Work orders are being
created, executed and recorded from
MIIM. Errors are excluded and you will
save a lot of time.
Realtime access to valuable
information
All cable infrastructure will be transparent
from end-to-end, including equipment,
from switches up to the connected assets,
even if they are switched off. You will
receive information on a ‘need to know’
basis.
Significant reduction in downtime
If there is an incident or failure in your
network, you will get an immediate
notification. You can see exactly
what caused the failure and can fix it
immediately; the down-time is significantly
shorter..
Switch
4
1
Work Area
Device
3
Work Area
Outlet
Equipment
Patch Panel
Horizontal
Patch Panel
2
MIIM can monitor the
entire channel
1. Switch to device panel
Low bandwidth
MIIM technology uses little bandwidth.
The unique data from a device or set of
devices can be accessed without having
to access the network and use significant
bandwidth.
2. Standard RJ45 patch cable
3. Horizontal cabling
4. Standard RJ45 workplace cable
Simple and cost effective
MIIM is easy to maintain, easy to install
and easy to use. There are no separate
patch cords, cables or displays needed.
MIIM integrates
seamlessly with other
IP systems.
Multi-site management
All sites can be managed from one single
website, allowing you to hae insight in
the entire network on remote. No more
unnecessary trips so you can save many IT
costs.
Improved network security
All assets are transparent and you can see
where they are located. When coupling
or uncoupling assets to the network, you
get an instant message, even if the unit is
turned off!
NETWERK - MOLEX
Better control and visibility of physical
cabling structure
Free cables in the network so expensive
switch ports are meaninglessly used, faulty
patches, cables that disappear or are not
connected? This is now all excluded; audits
are no longer necessary.
About Molex
Molex Incorporated is the world’s second largest manufacturer of electronic,
electrical and optical interconnection products and systems, switches and
application tools. It is located in Lisle, Illinois (USA ), has over 70 years of experience and has 54 production facilities in 19 countries. As one of the original
pioneers in structured cabling, Molex has delivered state-of-the-art communication solutions to large organizations around the world.
199
PATCHPANELS
MOLEX POWERCAT 6A SHIELDED PATCHPANEL 24 PORTS
The PowerCat 6A Shielded Patch Panel is made from robust sheet metal. This panel is supplied with a robust removable rear cable management tray for cable strain relief and neat cable dressing. Port numbering is provided
on the front and rear of the panel and individual ports may be colour coded using connector icon labels for site
specific network administration.
The PowerCat 6A Shielded Patch Panel features the unique DataGate™ Shielded connector. This shielded
connector offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilising robust die-cast zinc alloy connector body housing. This shielded
connector also features a unique spring loaded shutter that not only protects against dust and contaminates, but
also eliminates the risc of improperly seated patch cords. The shielded connector is dual colour coded for either
568A or 568B wiring schedules. The DataGate PowerCat 6A Shielded connector is specifically developed for
high-speed data transmission; designed to exceed the highest electrical performance standards in the industry.
The DataGate PowerCat 6A Shielded connector is backwards compatible with Shielded C6 and C5e systems.
•
•
•
•
DataGate ™ connectors features a unique spring loaded shutter that protects against dust.
Integral cable management shelf ensure bend radius compliance
EIA 568A/B colour coded
ETL Verified
Type no.
MX0001
Supplier no.
PID-00217
Ports
CAT6A 24 x RJ-45 Shielded
MOLEX POWERCAT 6 UNSHIELDED PATCHPANEL 24 PORTS
The PowerCat 6 patchpanel features the shuttered DataGate™ connector. This connector provides a unique
spring loaded shutter that not only protects it from dust and contaminates, but it also ejects improperly seated
patch cords. This panel is supplied with a rear cable management tray for cable strain relief and neat cable dressing. Port numbering is provided on the front and rear of the panel and individual ports may be colour coded
using connector icon labels for site specific network administration.
•
•
•
•
DataGate ™ connectors features a unique spring loaded shutter that protects against dust.
Integral cable management shelf ensure bend radius compliance
EIA 568A/B colour coded
ETL Verified
Type no.
MX0003
Supplier no.
PID-00141
Ports
CAT6 24 x RJ-45 unshielded
NETWORK - MOLEX
MOLEX POWERCAT 5E UNSHIELDED PATCHPANEL 24-PORTS
PowerCAT 5E Standard Grade Patch Panel is a cost effective and versatile means for connecting horizontal
cabling. Featuring an integral rear cable management tray for cable strain relief and neat cable dressing. Port
labelling is also featured for site specific network administration.
•
•
Integral cable management shelf
EIA 568B colour coded
Type no.
MX0005
200
Supplier no.
PID-00058
Ports
CAT5E 24 x RJ-45 unshielded
PATCHPANELS
MOLEX FIBER OPTIC SWING-OUT PATCHPANEL 1U
The Swing-Out Patch Panel is a light-weight, robust fiber optic patch panel designed for the installation of up
to 48 standard optic fibers or Laserstream™ blown fiber. The panel offers an economic alternative to metal fiber
enclosures. The lower tray is designed to pivot to gain access to the pre-formed fiber and splice management
areas for easy cable dressing and installation. All common adapter types, LC, SC and ST, are factory assembled
into interchangeable front plates that accommodate 6/12 duplex or 12 simplex adapters each.
Chassis includes installation accessory kit as follows:
- 2x splice holders
- 1x cable anchor bracket kit
- 2x tight buffer fibre holders
- 1x tight buffer inserter tool
- 1x front plate label sheet (4 labels per sheet)
- 1x 435mm bend limiting tube
•
•
•
•
•
Manufactured from high-strength, light-weight UL94 V-0 rated material.
No additional cable management accessories required.
Compatible with Laserstream blown fibre tubes (5mm)
Stackable splice bay allows for easy upgrade of splicing capacity
Interchangeable front plates are fully loaded with adapters.
Type no.
MX0016
MX0017
MX0018
MX0019
MX0020
Supplier no.
RFR-00205
RFR-00208
RFR-00212
KFR-00038
KFR-00039
Type
Chassis
Front panel 6x duplex SC multimode
Front panel 12x duplex LC multimode
Label sheets
cable anchor kit.
MOLEX FIBER ENCLOSURE
The 601 fibre series wall mount enclosure is a compact unit for optical fibre. The unit is made of white rugged
plastic with a low profile design that provides sufficient storage room for the fibre service loop making installation easy whilst ensuring the proper internal fiber management.
Compatible for splicing and direct terminations the unit can accept up to 8 fusion splice protectors or mechanical
splices. The 601 enclosure is supplied with an accessory kit which includes cable ties, labelling and mounting kits.
•
Available in Single and multimode fiber versions.
Type no.
MX0029
MX0030
Supplier no.
WFR-00029-02
WFR-00034-02
Connectors
8x duplex LC singlemode
12x duplex LC multimode
MOLEX UNIVERSAL SPLICING TRAY
Type no.
MX0021
MX0024
MX0025
MX0026
MX0027
MX0028
Supplier no.
KFR-00040
AFR-00190
AFR-00001
AFR-00336
AFR-00338
KFR-00008
Type
45 mm fusion splice protector - 2.2 mm (o.d)
Low Profile 24 fiber fusion splice
Universal splicing tray for 12 fibres.
Universal splicing tray for 24 fibres.
Universal splicing tray unloaded
45 mm fusion splice protector - 2.4 mm (o.d)
NETWORK - MOLEX
The Universal Splice Tray is a configurable enclosure capable for both mechanical and fusion splices. Loose tube
cable is routed into and out of the tray through adjustable tube grips located at each corner. Grips eliminate the
need for cable ties and can be tightened and loosened preventing over-compression of the loose tube cable.
Package
Unit 100 Piece(s)
201
PATCHPANELS
MOLEX FIBER MANAGEMENT PANEL
The FMP3 body kit is a universal panel, using a common chassis that is interchangeable with our range of front
plates. The FMP3 is a rack mounted panel, can be used as both a sliding and fixed panel and allows direct
mounting of the connectors into the front panel plates.
•
•
•
Up to 24 ports (48 fibers)
Different front plates available.
Strain relief for fibercable
Technical specifications
Dimensions
Type no.
MX0012
MX0013
MX0014
MX0015
: 442 x 291 x 44 mm
Supplier no.
RFR-00100
RFR-00195
KFR-00016
CSP-00030
Type
Body kit
Front plate 24 port duplex LC adapter Multimode
SC SPX lug (MT-RJ/Duplex LC)
Mounting adapter screw for Fiber Management Panel
MOLEX 12 FIBER ADAPTER PLATE
12 Fibre Adapter Plates fit directly into most Molex fibre management enclosures. This simple design requires no
tooling as the plates install with a simple snap rivet, making installation and changes simple.
•
Quad versions are with Molex unique shuttered technologie to protect installers
and end users form LED/Laser light emissions.
Type no.
MX0022
MX0023
Supplier no.
AFR-00374
AFR-00375
Type
SC Duplex 12 Fiber adapter plate, Multimode OM3 - Aqua
LC Quad 12 Fibre MM OM3 adapter plate Aqua
NETWORK - MOLEX
MOLEX RING RUN PANEL, 1U
Cable Management Panels provide cable dressing during installation or changes and provide an organised format for system maintenance. Panels are comprised of black Lexan rings mounted on graphite grey powdercoat
panels and include mounting screws and washers.
•
•
•
•
1U Standard 19” rack mount
Robust construction.
Flexible rings for convenient operation
Rounded edges to prevent damage to patch cords
Type no.
MX0007
202
Supplier no.
25.B016G
Type
5 ring 1U panel
TWISTED PAIR CABLE
MOLEX POWERCAT 6A U/FTP SOLID CABLE
The Molex PowerCat 6A U/FTP Cable is specifically designed to support high speed data network applications
such as 10-Gigabit Ethernet (10GBASE-T). The cable is constructed of 4 screened pairs and a drain wire. This
cable minimises alien crosstalk, provides excellent signal isolation and provides superior electromagnetic interference (EMI) protection.
•
•
•
•
•
U/FTP LSZH cable
Supports high speed data network applications such as 10-Gigabit Ethernet (10GBASE-T)
Enhanced performance individually screened 4 pair U/FTP LSZH cable.
Minimises alien crosstalk, provides excellent signal isolation and provides superior electromagnetic (EMI) protection.
ETL verified to TIA/EIA-568-B.2-10 Category 6A standard.
Technical specifications
Conductor
Sheat
Cable diameter
Colour
: AWG#23 solid
: LSZH IEC 60332-1
: 6.8 mm
: Violet
Type no.
MX0033
Package
Reel 500 m
Supplier no.
CAA-0322L-VL
MOLEX POWERCAT 6 U/UTP LSZH SOLID CABLE
PowerCAT 6 4 pair U/UTP cable has been designed to support high-speed datatransmission systems. The cable
features a cross-member designed to keep individual pairs separated for the reduction of NEXT and ELFEXT. The
cable is available on 500m reel and 305m reel in a box.
•
•
•
Unshielded 4 pair LSZH cable
Central separator for the reduction of NEXT & ELFEXT.
ETL verified.
Technical specifications
Conductor
Sheat
Cable diameter
Colour
: AWG#23 solid
: LSZH IEC 60332-1
: 6.4 mm
: Violet (RAL 4005)
Type no.
MX0032
MX0034
Package
Reel 500 m
Reel in box 305 m
Supplier no.
CAA-00325
CAA-00305
MOLEX POWERCAT 5E U/UTP SOLID LSZH CABLE
PowerCat Category 5E U/UTP 4 pair cable supports high-speed datatransmission systems. The cable is available
on a 305m reel in a box.
Unshielded 4 pair LSZH cable
Independently tested
NETWORK - MOLEX
•
•
Technical specifications
Conductor
Sheat
Cable diameter
Colour
: AWG#24 solid
: LSZH IEC 60332-1
: 5.2 mm
: Violet
Type no.
MX0031
Package
Reel in box 305 m
Supplier no.
39-504-5E
203
WALL MOUNTING MATERIAL
MOLEX POWERCAT 6A SHIELDED DIN49075 MODULE
The PowerCat 6A shielded DIN module is designed for compatibility with the 50 x 50mm DIN 49075 standard.
The angled design reduces patch cord bend radius and features a protected labelling facility. Individual ports
may be colour coded using a connector icon label, for site-specific network administration.
The PowerCat 6A side entry DIN module is designed specifically for shallow backbox and trunking applications.
The module features the unique side entry DataGate shielded connector. This shielded connector offers superior
alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI)
protection by utilising robust die-cast zinc alloy connector body housing. This shielded connector also features
a unique spring loaded shutter that not only protects it from dust and contaminates, but also ejects improperly
seated patch cords thanks to its ingenious spring loaded design. The shielded connector is dual colour coded for
either 568A or 568B wiring schedules.
•
•
•
Busch Jaegar®, Peha®, Jung®, Gira®, Niko® bezel compatible
Two Ports protected by spring loaded shutters
EIA 568B colour coded
Technical specifications
Dimensions
Type no.
MX0002
: 50 x 50 mm (DIN 49075)
Supplier no.
WNC-00051-06
Ports
2x RJ-45
MOLEX POWERCAT 6 UTP DIN49075 MODULE
The PowerCat 6 DIN module is compatible with the 50 x 50mm DIN 49075 standard. It is a fully assembled
unit featuring the shuttered DataGate Plus™ connector. The angled design reduces patch cord bend radius and
features a protected labelling facility. Individual ports may be colour coded using a connector icon label, for sitespecific network administration. The DataGate Plus™ RJ-45 IDC connector includes a unique integral shutter
that not only protects the connector from dust and contaminants, but also ejects improperly seated patch cords
thanks to its ingenious spring-loaded design. The DataGate Plus connector is dual colour coded for either 568A
or 568B wiring schedules and is RJ-11 compatible.
•
•
•
Busch Jaegar®, Peha®, Jung®, Gira®, Niko® bezel compatible
Two Ports protected by spring loaded shutters
EIA 568B colour coded
Technical specifications
Dimensions
Type no.
MX0004
: 50 x 50 mm (DIN 49075)
Supplier no.
WNC-00031-06
Ports
2x RJ-45
MOLEX POWERCAT 5E UTP DIN49075 MODULE
The DIN Module has been designed for compatability with the 50 x 50mm DIN 49075 standard. The module
will support all currently ratified applications including gigabit Ethernet. The product is a fully assembled unit,
complete with 2 PowerCat RJLP RJ-45 connectors protected by spring loaded shutters. Suitable for high speed
data transmission, the PowerCat RJLP RJ-45 connector was designed to meet the requirements of the Category
5E standard which demands compliance with the Power Sum principle of measurement and test.
•
•
•
Busch Jaegar®, Peha®, Jung®, Gira®, Niko® bezel compatible
Two Ports protected by spring loaded shutters
EIA 568B colour coded
Technical specifications
Dimensions
Type no.
MX0006
: 50 x 50 mm (DIN 49075)
Supplier no.
WNC-00020-06
Ports
2x RJ-45
NETWORK - MOLEX
MOLEX POWERCAT MODULE FOR BELGIUM
The PowerCat UTP 22.5 x 45mm module is compatible with the Legrand® range of 45 x 45mm bezels. Two
modules or a single module and a blank may be installed in this format. The product is a fully assembled unit
featuring the shuttered DataGate PlusTM connector. The angled design reduces patch cord bend radius and
features a protected labelling feature. Individual ports may be colour coded using a connector icon, for sitespecific network administration. The 22.5 x 45mm module features the DataGate Plus Category 6 connector.
This superior RJ45 IDC includes a unique integral shutter that not only protects the connector from dust and
contaminants, but the ingenious spring-loaded design also ejects improperly seated patch cords. The DataGate
Plus connector is dual colour coded for either 568A or 568B wiring schedules and is RJ11 compatible.
Type no.
MX0035
MX0036
MX0037
204
Supplier no.
MLG-00021-02
MLG-00002-02
16.A0012
Type
C6 UTP 1 x RJ-45 22.5 X 45 mm
C5E UTP 1 x RJ-45 22.5 x 45 mm.
Blank module 22.5 x 45 mm.
TOOLING AND TEST EQUIPMENT
MOLEX TERMINATION TOOL
The Category 6 110 style multi pair termination tool provides 4-pair high impact termination specifically for
Molex 110 style Category 6 connector termination.
Type no.
MX0008
Supplier no.
31-001
Type
110 punchdown termination tool
MOLEX SLT3S TESTER
The SLT3™ Tester is a rugged, lightweight product designed to verify the integrity of 1, 2, 3, and 4 pair UTP
channels. Incorporating a unique 3-in-1 design, this tester features built-in modular jacks for USOC, EIA 568A
and 568B wiring sequences. Simply connect the master and slave unit to each end of the cable under test, and
the SLT3 automatically verifies correct cable sequence, as well as open and short circuits.
Innovative 3-in-1 design features modular jacks for testing USOC, EIA 568A and 568B cabling systems.
Accurately verifies the continuity and sequence of 1, 2, 3 and 4 pair UTP and FTP channels.
Continuously-sequencing LED display provides a diagnostic readout that immediately detects shorts,
opens, reversals and mis-wires at a glance
Type no.
MX0009
Supplier no.
33A-100-10
Type
Master and Slave unit with 9 Volt battery.
NETWORK - MOLEX
•
•
•
205
FIBER TO THE OFFICE
Fiber to the Office : reduce costs and extend the lifetime of a network
Why future oriented?
Glass fiber connections in office environments are booming. Whether
it comes to the construction, extension or renewal of a corporate network, fiber is an easy to handle cable that is future-oriented, energyefficient and cost-efficient. The Fiber-to-the-Office (FTTO) concept by
MICROSENS is the ultimate cable infrastructure for modern office environments!
Thanks to the fiber technique FTTO can
meet the increasing demands of data traffic in the future.
- Long distances (> 100 km).
- Virtually unlimited bandwidth.
- Longer lifetime.
Why cost efficient?
The costs of a fiber network are already recovered in the installation phase.
- Where there is a copper cable required for each socket in case of copper cabling,
FTTO enables a fiber optic network switch to have network access by means of only
one single fiber cable.
- No extra costs for air conditioning, UPS and access control.
- Relatively cheaper cable.
- Higher security (tapping).
Why energy efficient?
Fiber connections in offices also provide an energy efficient network infrastructure.
- No active equipment required for signal processing within the network.
- No air conditioning equipment and UPS needed.
- Low space.
- No EMC issues or problems with grounding.
About MICROSENS
MICROSENS GmbH & Co. KG has
been one of the world’s pioneers
in optical fiber transmission
systems for 20 years. It not only
offers solutions for effective office
networks and industrial
Applications in harsh environments,
but also for large LAN and high
performance WAN environments.
An efficient and fast data
transmission is the central focus.
NICROSENS is part of the German
euro micron group.
What more does MICROSENS
offer?
Besides Fiber To The Office,
MICROSENS provides solutions for
industrial Ethernet; the Ethernet
ring technology, developed by
MICROSENS, allows the setup
of redundant ring structures in
Ethernet networks. The ultra-fast
protection mechanism provides a
short response time for missioncritical and failure sensitive
applications.
NETWORK - MICROSENS
The Optical Transport Platform
of MICROSENS provides
enterprises with a scalable, longlife connectivity solution, because
the system grows with the ever
increasing bandwidth requirements
without the need for new fiber
connections.
For more information and
questions please contact our
sales team.
206
FIBER TO THE OFFICE
FTTO vs. Structured Cabling Network
(SCN)
In a classic SCN the horizontal cabling at
every level exists of copper cables that
connect the data ports at the office to the
central Ethernet switches that are placed
on the same floor.
With the FTTO concept, fiber optic cables
are implemented for the horizontal floor
wiring and there is only one central Ethernet switch that provides the entire office of
a network connection. End users connect
their equipment directly to the copper
Ethernet ports via MICROSENS’4 port fiber
Micro Switches (Fast Ethernet or 1 Gb) at
the workplaces.
Disadvantages Structured Cabling Network (copper)
x
Copper does not support higher data rates than max 10 Gb/s (short-range)
x
Strict lengths limitations (max. 100 m)
x
Many wiring cabinets for cable consolidation needed (could be more than 100
per floor), wasting valuable commercial space
x
Thick cable trunks with high fire load and susceptibility to EMI
(Electromagnetic Interference) can have negative impact on overall network reliability
x
High demand for network hardware leading to low energy efficiency,
high cost for cooling and maintenance and power resilience
x
Limited average bandwidth per user. One Gigabit link is shared by up to 24/48 users
x
Change of technology requires completely new horizontal cablin
Advantages Fiber To The Office (fiber)
Support of all present and future data rates
Almost no length limitations (typical several thousand meters for single
mode fiber)
No active equipment needed for signal conditioning within the networking path
NETWORK - MICROSENS
Gain of building space, open for commercial use
Cable volume is reduced by 75 per cent, reduced fireload, high resistance to
electromagnetic interference
No additional cost for climatisation, uninterruptable power supply and access
control
High bandwidth per user. Only four users per FTTO Switch share one Gigabit link
In case of technology change the floor cabling does not need to be renewed
Integration of POE, Power-over-Ethernet (+) through the MICROSENS Micro
Switches
207
FIBER TO THE OFFICE
GIGABIT ETHERNET MICROSWITCH 6 PORT GENERATION 6
The 6 port GBE Micro Switch Generation 6 constitutes an extension of the Gigabit Ethernet Micro Switch. In
addition to the 1000Base-X fiber optic uplink, for linking to the central distributor, this switch has an additional
RJ-45 downlink 10/100/1000Base-T.
This additional connection can, amongst other things, be used for cascading other Micro Switches in order to
obtain additional connection capacities. The interconnection of two switches via the TP port offers to increase
the reliability of the network. If one fiber connection is interrupted the neighbouring switch handles the data
traffic via RSTP.
A powerful Linux-OS offers additional services and feature for future use. The use of memory-card shortens
maintenance and service. Intelligent power management monitors the active current consumption of connected
end equipment. The switches are powered by an external 230V AC.
•
•
•
•
High performance, full Gigabit design
RJ-45 downlinkport for hidden connection of Ethernet devices (10/100/1000T)
Energy efficiency by modern chipsets
Manageable (web/Telnet/SNMP/ optional NMP software)
Technical specifications
Ports
Type no.
MR0001
MR0002
MR0003
: 4x 10/100/1000Base TX (RJ-45)+1 downlink 10/100/1000Base TX (RJ-45)
Supplier no.
MS440201M-G6
MS440202M-G6
MS440209M-G6
Type
Uplink 1000Base-SX multimode SC
Uplink 1000Base-SX singlemode SC
Uplink 1000Base-SX SFP
NETWORK - MICROSENS
GIGABIT ETHERNET MICROSWITCH 6 PORT GENERATION 6 WITH POE+
The 6 port GBE Micro Switch Generation 6 constitutes an extension of the Gigabit Ethernet Micro Switch. In
addition to the 1000Base-X fiber optic uplink, for linking to the central distributor, this switch has an additional
RJ-45 downlink 10/100/1000Base-T. This additional connection is positioned at the rear of the switch and is also
covered after the installation. This additional connection can, amongst other things, be used for cascading other
Micro Switches in order to obtain additional connection capacities.
The interconnection of two switches via the TP port offers to increase the reliability of the network. If one fiber
connection is interrupted the neighbouring switch handles the data traffic via RSTP.
All five RJ-45 ports (4 user ports and 1 downlink) support the complete Powerover- Ethernet functionality according the IEEE Std. 802.3af and 802.3at (min. 54VDC needed). A powerful Linux-OS offers additional services
and feature for future use.
The use of memory-card shortens maintenance and service windows. The whole configuration of the Micro
Switch can be moved to another system, just by changing the SD-card. A fault-tolerant journaling file-system is
used. An encryption of the SD-Card is as option available.
Intelligent power management monitors the active current consumption of connected end equipment. The
switches are powered by an external 54 V DC power supply.
The GBE Micro Switch supports Compact-SFP-Transceivers (C-SFP) for two redundant fiber-uplink.
•
•
•
PoE+
High performance, full Gigabit design
RJ-45 downlinkport for hidden connection of Ethernet devices (10/100/1000T)
Technical specifications
Ports
Type no.
MR0008
MR0009
208
: 4x 10/100/1000Base TX PoE+ (RJ-45)+1 downlink 10/100/1000Base TX PoE+ (RJ-45)
Supplier no.
MS440201PM-48G6
MS440209PM-48G6
Type
Uplink 1000Base-SX multimode SC
Uplink 1000Base-SX SFP
FIBER TO THE OFFICE
FAST ETHERNET MANAGED MICROSWITCH 5 PORT.
The Fast Ethernet Micro Switches are extreme compact and are designed for the tool-free installation into cable
trunks and sub-floor boxes. The design in 45x45 mm grid is compatible to the major international electro installation systems. The Micro Switches offer the complete Fast Ethernet performance on all ports. The uplink to the
central switch is realised either by a transceiver.
The Fast Ethernet Micro Switch has an integrated 230 VAC power supply. The equipment generally has an integrated network management system and supports all management standards from the web browser over Telnet
up to the SNMP. Furthermore, the switches have all common security features such as VLANs, authentication
according to IEEE Std. 802.1x.
•
•
•
Management with several configuration and monitoring features
VLANs, data prioritisation (QoS)
Integrated power supply with 100 – 240 V AC input
Technical specifications
Ports
Type no.
MR0010
: 4x 10/100Base TX (RJ-45)+1 uplink 100Base FX Multimode SC
Supplier no.
MS450241M
Type
4x10/100Base + 1x100Base-FX SC
FAST ETHERNET MANAGED MICROSWITCH 5 PORT WITH POE
The Fast Ethernet Micro Switches are extreme compact and are designed for the tool-free installation into cable
trunks and sub-floor boxes. The design in 45x45 mm grid is compatible to the major international electro installation systems. The Micro Switches offer the complete Fast Ethernet performance on all ports. The uplink to the
central switch is realised either by a transceiver.
The equipment generally has an integrated network management system and supports all management standards from the web browser over Telnet up to the SNMP. Furthermore, the switches have all common security
features such as VLANs, authentication according to IEEE Std. 802.1x.
The complete device is supplied with 48 V DC power. This supply can be done by a compact external power
supply or a separate in-house DC power network..
•
•
•
•
PoE controller accordding IEEE 802.3af
The switch is supplied with 48 V DC power.
VLANs, data prioritisation (QoS)
Management with several configuration and monitoring features
Technical specifications
Ports
Type no.
MR0012
: 4x 10/100Base TX (RJ-45)+1 uplink 100Base FX Multimode SC
Supplier no.
MS450241PM-48
Type
4x10/100Base+PoE + 1x100Base-FX SC
FAST ETHERNET MANAGED MICROSWITCH 6 PORT.
An intelligent combination of fiber optic (100Base-FX) and twisted pair (10/100Base-TX) is obtained with the
Fast Ethernet Micro Switch. The device offers to the user also the standard RJ-45 ports for the connection of the
end equipment to a fiber optic network. The compact 45x45 switches are designed for the direct installation into
cable trunks and sub-floor boxes.
•
•
•
NETWORK - MICROSENS
The 6 port version has on its rear side an additional RJ-45 downlink 10/100Base-TX that is covered after the
installation. This additional connection enables cascading other Micro Switches offering thus additional connection capacities. The Fast Ethernet Micro Switch has an integrated 230 VAC power unit. This manageable version
offers VLAN operation according to IEEE 802.1Q and further security features such as IEEE 802.1X, accounting,
etc.
Management with several configuration and monitoring features
VLANs, data prioritisation (QoS)
Integrated power supply with 100 – 240 V AC input
Technical specifications
Ports
Type no.
MR0011
: 4x 10/100Base TX (RJ-45)+1 downlink 10/100Base TX
Supplier no.
MS450333M
Type
Uplink 100Base-FX multimode SC
209
FIBER TO THE OFFICE
FAST ETHERNET INSTALLATION TWIN CONVERTER
The MICROSENS Fiber To The Office concept with the intelligent combination of fiber optic and twisted pair
cables is a long term, future proofed investment. The Installation Converter allows the easy and save connection
of copper based LAN equipment to fiber optic networks, because of the extremely short delay time.
There are two Converter integrated in one device because two working places are typical for office applications.
Due to the very compact design of the Twin Converter it is compatible to nearly all available standards for office
installation material. Because of the smart design the Twin Converter can ideally be installed in sub floor boxes.
•
•
•
•
Double Converter 2x100Base-TX / 100Base-FX
Bridge mode for speed adaptation 10/100 Mbps, half-/full-duplex
Internal 230VAC power supply
Hidden fiber port for high robustness of the complete system
Type no.
MR0013
Supplier no.
MS450295
Type
2x100Base TX - 100Base FX multimode LC
SFP PLUGGABLE TRANCEIVER GIGABIT ETHERNET
The majority of all active network devices are now equipped with modular optical interfaces in the form of SFP
ports. For the user this permits the highest possible flexibility in terms of network configuration.
MICROSENS provides a special range of SFP transceivers with extended temperature range especially for the
insertion into network devices intended for operation in rough environments. The temperature range for operation is from -40 to +85 °C.
These SFP transceivers generally have an integrated digital diagnostics function and, depending on the version,
are designed for Fast Ethernet (100Base-FX) or Gigabit Ethernet (1000Base-SX/LX). Multimode and single mode
versions with different optical budget are available.
•
•
Extended temperature range -40 °C till +85 °C.
Management digital diagnostic functions.
Type no.
MR0004
MR0005
Supplier no.
MS100200DX
MS100210DX
Type
1000Base-SX multimode 850nm LC
1000Base-LX singlemode 1310nm LC
MOUNTING PLATE AND FRAME
Mounting plate and metal frame for Microsens FTTO switches
NETWORK - MICROSENS
Type no.
MR0006
Supplier no.
MS140029
Type
Mounting plate+frame E2-box
MOUNTING TRUNCK C PROFILE
Mounting Trunck C profile kit for Microsens FTTO switches
Type no.
MR0007
210
Supplier no.
MS140040BR
Type
Mounting Trunk C profile
INDUSTRIAL SOLUTIONS
4/8 PORT GIGABIT ETHERNET INDUSTRIAL SWITCHES ENTRY LINE
The new Gigabit Ethernet industrial switch offers the full Gigabit performance on all ports. This offers, beside the
central uplink, also the high speed connection of Gigabit end devices.
The new industrial switch belongs to the "Entry Line" family and has depending on the version up to eight RJ45 ports and two SFP slots, which can be used alternatively to two RJ-45 ports (dual media). For the SFP slots
MICROSENS offers a wide range of transceivers, which allow a flexible and cost effective fiber connection for
multimode and single mode networks.
The devices of the MICROSENS "Entry Line" enable a simple network setup in a Plug&Play manner. Therefore many end users decide to change from field bus based automation to modern Ethernet based technology.
Furthermore this migration gives significant cost savings for investment and operation of the network.
In principle Gigabit Ethernet is ideal to provide the required bandwidth and to transmit real time data for
automation in shortest time. Reason beside the high bandwidth is that the latency time for forwarding the data
packets is much lower.
•
•
•
Extended temperature range -40. . +75 °C
Connection of redundant power supply possible
Monitoring with potential free contact
Technical specifications
Ports MR0014
Ports MR0015
: 4x 10/100/1000Base-T , 1 x SFP-Slot
: 6 x 10/100/1000Base-T , 2x 10/100/1000Base-T or 2x SFP-Slots 1000Base-
Type no.
MR0014
MR0015
Type
4X10/100/1000BASE TX+1XSFP
8X10/100/1000BASE TX+2XSFP
Supplier no.
MS655201X
MS655210
5/8 PORT FAST ETHERNET INDUSTRIAL SWITCHES ENTRY LINE
The Entry Line series comprises a number of compact Fast Ethernet switches. The basic devices have 5x or 8x
RJ-45 copper ports. Extended switch versions are equipped with additional fiber optic ports. For example, in
addition to the 4x 10/100Base-TX ports in the 5 port version, a fiber optic port is available.
The devices can be operated immediately and require no configuration. Ports are set automatically by AutoNegotiation (10/100/1000Base-T) and Auto MDI/MDI-X.
The power supply ports are designed redundantly. An isolated alarm contact reports a possible fault in the power
supply of the device.
•
•
•
Extended temperature range -40. . +75 °C
12 to 48 V DC power, redundant input.
Monitoring with potential free contact
Type no.
MR0018
MR0016
MR0017
Supplier no.
MS655102X
MS655100X
MS655140X
Type
4x 10/100Base-TX, 1x 100Base-FX mulitimode SC
5x 10/100Base-TX
8x 10/100Base-TX
5 PORT FAST ETHERNET INDUSTRIAL SWITCHES WITH POE ENTRY LINE
•
•
•
NETWORK - MICROSENS
Microsens Fast Ethernet switches are available with integrated Power-over-Ethernet functionality. Four
10/100Base-TX ports facilitate the direct supply of terminal devices via the data connection in accordance with
IEEE 802.3af with an output of up to 15.4 W per port. In the copper version the device has a fifth 10/100BaseTX uplink port. Other versions are provided with a fiber optic port in the multimode or single mode version.
The ports are designed redundantly. Dedicated LED displays provide information on the power supply status up
to the PoE functionality for each port.
Extended temperature range -40. . +75 °C
48 V DC power, redundant input.
Monitoring with potential free contact
Type no.
MR0019
MR0020
MR0021
Supplier no.
MS655100PX-48
MS655102PX-48
MS655104PX-48
Type
4x 10/100Base-TX + PoE, 1x 10/100Base TX uplink
4x 10/100Base-TX + PoE, 1x 100Base FX multimode SC
4x 10/100Base-TX + PoE, 1x 100Base FX singlemode SC
211
INDUSTRIAL SOLUTIONS
FAST ETHERNET AND GIGABIT ETHERNET BRIDGING CONVERTER
The new fast and Gigabit Ethernet Bridging converter of the Industrial Ethernet Entry Line offer transmission
speeds up to 1 Gbps in Industrial Ethernet applications. In the office area Gigabit Ethernet has already established as the standard protocol. To integrate industrial end devices direct, MICROSENS offers the new Gigabit
Ethernet Bridging Converter.
Beside the media conversion from copper to fiber the devices are doing a speed adaptation of 10/100BaseTX for Fast Ethernet and 10/100/1000Base-T for Gigabit Ethernet. This enables the direct connection of end
devices with different speed to the existing central switch.
The devices are immediately ready for operation, a configuration by management is not necessary. With a pluggable connector the power is supplied (redundant possible) and offers the monitoring of the device by a relay.
•
•
•
Optional converter or bridging function (via DIP-switch)
Automatic speed adjustment per Auto Negotiation
Link Through function
Technical specifications
Input voltage
Type no.
MR0022
MR0023
MR0024
: 48 V DC redundant
Supplier no.
MS655060X
MS655062X
MS655099X
Type
1x 10/100Base-TX - 100Base-FX multimode 1310nm SC
1x 10/100Base-TX - 100Base-FX singlemode 1310nm SC
1x 10/100Base-TX - 100Base-X SFP port
DEVICE SERVERS FOR RS-232/422/485 TO ETHERNET (IP)
The Device Server allows a fast and easy network connection of serial devices with RS-232/422/485 interfaces.
The use is universal and independent of the type of the serial interface. For the transmission the IP protocol is
used. For the connection to the Ethernet network the device has one RJ-45 port (10/100Base-TX).
The device is very compact are designed fort he mounting on DIN-rails. The Windows software for the detection, monitoring and configuration of the device is included at delivery. For operation there is a virtual COM
port emulated on the PC. Furthermore there are TCP-Server and -Client services supported.
•
•
•
•
Suitable for RS-232/422/485
Reliable and cost effective conversion to Ethernet (10/100Base-TX)
Emulation with virtual COM-Port
Windows Software included
Type no.
MR0025
Supplier no.
MS655400X
Type
1x RS-232/422/485 to 2x 10/100Base-TX
NETWORK - MICROSENS
FAST ETHERNET VDSL EXTENDER
The Fast Ethernet VDSL2 Extender offers transmission of Fast Ethernet across conventional 2-wired lines (telephone or ISTY cable) at distances of up to 2000 m (9Mbps).
With transmission speeds of up to 88 Mbps, this extender provides high network performance and can achieve
a range of up to 300 m. The use of devices is in pairs according to the master/slave principle, in which case
configuration is performed using a DIP switch.
The network connection takes place via an RJ-45 jack with 10/100Base-TX. The 2-wire line is connected via
an RJ-45 jack. The maximum transmission speed is automatically negotiated in 10 speed levels according to
distance and transmission quality and signalled to the user via LED displays.
The device is design for an operating temperature range of -40 to +75 °C.
•
•
•
•
•
•
Transmission of Fast Ethernet via 2-wire cables
12..48 VDC power input, redundant
Effective overvoltage protection
Potential free alarm relay contact
Operation temperature range -40..+75 °C
Vibration proof and shock resistant
Type no.
MR0027
212
Supplier no.
MS655020X
Type
10/100Base-TX via 2-wire cable
INDUSTRIAL SOLUTIONS
INDUSTRIAL POWER-OVER ETHERNET+ INJECTOR
The industrial PoE Injector can power PoE-compliant switches, WLAN solutions or IP cameras directly through
the data cable. Devices with maximum power consumption levels of up to 30 watts are supported. PoE+ is
preferred for use at outdoor access points with heating elements or with motor-controlled surveillance cameras,
since these devices consume more power.
The MICROSENS PoE Injector is also specially conceived with demanding industrial environments in mind. The
device has an extended temperature range of -40 to +75 degrees, additional protection against shock and vibrations and a robust metal case built to Protection Class IP30 standards. Areas of application for this new solution
range from automation technology to telecommunication-related uses to railway surveillance
Supports 10/100/1000Mbps
IEEE 802.3at compatible (30 W)
Extended temperature range of -40 to +75°C
Protection against shock and vibrations
Robust metal case
Type no.
MR0028
Supplier no.
MS655033X
Type
Industrial PoE+ injector 10/100/1000Mbps
NETWORK - MICROSENS
•
•
•
•
•
213
FAST ETHERNET SWITCHES
Katron Technologies Inc. (KTI) is one of the market leaders in networking products and
offers a complete range of high-quality network components, from standard network
cards to modular switches. KTI offers a wide range of networking products under its own
brand, including media converters, switches, Fast Ethernet and Gigabit Ethernet switches.
KTI is also a specialist in fiber optic applications. It offers quality products and services for a
variety of organizations, from small businesses to multinationals.
KTI not only develops private label products, but also develops and manufactures for
leading brands in networking markets. KTI designs and manufactures professional network
solutions applied worldwide by for example airlines, factories, railway organizations, oil
refineries and mining industries.
What KTI solutions we offer?
• Switches (managed and unmanaged)
• Media converters (fiber, copper)
• Power over Ethernet (PoE , PoE+)
• SFP Modules
• IP67 switches (waterproof)
• DIN rail power supplies
• RS -232 to RS-422/485 converters
• RS - 232 over fiber
100% tested, zero DOA
Profinet compliant
Quality is guaranteed by KTI’s professional R&D department which understands what features
are important to the user. Solutions are 100% tested on operation under extreme conditions
before leaving the factory. The tests are taking place in superheated areas where, by means
of temperature fluctuations, the burn-in that is equal to the first 6 weeks is simulated. Partly
because of this, there are no DOA’s and a very high Mean Time Between Failures (MTBF) can
be realized.
Advanced features
KTI solutions can have several advanced features, such as management options,
fiber connectivity, IGMP snooping V1/V2, Tag VLAN and QoS.
The industrial switches of KTI are fully Profinet
compliant.
Compact and robust housing for DIN rail
mounting
The industrial solutions of KTI are characterized by compact and robust housings that are
suitable for DIN rail mounting..
KS2030
KS2151
Industrial properties
Power over Ethernet solutions (PoE , PoE+)
KTI’s industrial switches meet extreme requirements in the area of vibration resistance, immunity to EMI and temperature reach. Water and
dust proof switches are available for extreme
environments.
NETWORK - KTI
KW9020
KS2034/KS2035/KS2036
214
FAST ETHERNET SWITCHES
NWAY NETWORK SWITCH 10/100 MBPS
Compact desktop switches, perfect for workgroups and home use with a solid metal housing for a better magnetic shielding.
•
•
•
•
Store and forward architecture.
Supports 1000 MAC adresses.
Contains LEDs for Power, Collision, Activity and Link status.
Power supply included.
Technical specifications
Ports
Contains
Dimension
Housing
Type no.
KS1012
: RJ-45 10/100 Base-T
: LEDs for power, collision, activity and link status
: 116x70x25 mm
: Metal
Supplier no.
KS-SOHO-8 REV I
Number of ports
8
FAST ETHERNET LAYER 2 SWITCH WITH FIBER PORT
These compact desktop switches have a compact design. Work groups can be coupled to a fiber-optic network
in an easy way.
•
•
•
Ideal due to compact design.
Supports full-duplex flow control.
Indication LEDs for Power (Unit), Link/ACT (Port), 100M (Port).
Technical specifications
Number of MAC addresses
IEEE Standard
Dimension
Filtering addresses
Power
: 1.000
: IEEE 802.3, 10 BaseT, IEEE 802.3u 100 BaseTX, 100 Base Fx
: 144x100x26 mm
: Unicast/Multicast
: 100~240V AC, 50/60 Hz
Type no.
KS1060
KS1062
KS1064
KS1065
KS1066
Type
4x RJ45 + 1x MM Duplex ST
4x RJ45 + 1x MM Duplex SC
4x RJ45 + 1x MM MTRJ
7x RJ45 + 1x MM Duplex SC
7x RJ45 + 1x MM Duplex ST
Supplier no.
KS-105FT
KS-105FC
KS-105F-JM
KS-108-FC
KS-108-FT
16-PORT 10/100 MBPS LAYER 2 FAST ETHERNET SWITCH
This 16-port 10/100Mbps workgroup switch supports half-duplex and full-duplex connections. Each network
port supports auto-MDI/MDI-X detection and auto-negotiation, making the switch very flexible while using the
network with high efficiency. The switch uses the store-and-forward method; the data will only be forwarded if
the receiver is reachable.
•
•
•
Supports half and full duplex mode.
Uses Auto MDI/MDI-X detection and auto negotiation for extra flexibility.
Indication LEDs for Power (Unit), Link/ACT (Port), 100M (Port).
Ports
Number of MAC addresses
IEEE standard
Dimension
Assembly
Power
: 16x 10/100 Mbps ports, RJ-45
: 8.000
: 802.3 10BaseT, 802.3u 100BaseTX
: 440x140x44 mm
: 19" Rack, 1 HE
: 100~240V AC, 50/60 Hz
Type no.
KS1020
Number of ports
16
Supplier no.
KS-116/D
NETWORK - KTI
Technical specifications
215
FAST ETHERNET SWITCHES
24-PORT 10/100 MBPS LAYER 2 FAST ETHERNET SWITCH
Switch with 24x 10/100Base-T ports. Every port is auto-negotation and equipped with MDI-X detection. Can
be used as desktop or as a 19" mounted switch.
•
•
•
Supports half and full duplex mode.
Uses Auto MDI/MDI-X detection and auto negotiation for extra flexibility.
Indication LEDs for Power (Unit), Link/ACT (Port), 100M (Port).
Technical specifications
Ports
Number of MAC addresses
IEEE Standard
Dimension
Assembly
Power
: 24x RJ-45 STP
: 8.000
: IEEE 802.3 10 BaseT, IEEE 802.3u 100Base-TX
: 440x140x44 mm
: 19" Rack 1 HE or Desktop
: 100~240V AC, 50/60 Hz
Type no.
KS1030
Number of ports
24
Supplier no.
KS-124/E
WEB SMART 24+2 PORTS FAST ETHERNET LAYER 2 SWITCH
The Web Smart 24-Port switch provides 24x 10/100 Mbps Fast Ethernet Ports & 2 Gigabit combo ports. The
switch supports a port bandwidth control function and contains a web-based management interface. It can indicate port status, statistic monitoring and control function.
•
•
•
No fan design.
IGMP snooping support. (v1, v2)
Wide operating temperature range.
Technical specifications
RJ-45 TP ports
Combo ports
Dimension (WxDxH)
Environment temperature
Power Supply
: 24x shielded 10/100 Mbps
: 2x shielded 10/100 Mbps ports or 1000 Mbps SFP slots
: IEEE 802.3 10 Base-T, IEEE 802.3u, 100 Base-TX, IEEE 802.3z 1000 Base-T,
IEEE 802.3ab, IEEE 802.1Q, IEEE 802.1p
: 295x160x43 mm
: Operational: -20 - +60, Storage: -30 - +85 °C
: 100-240V AC
Type no.
KS3200
type
Web smart 24+2 ports SFP switch
Standard
Supplier no.
KFS-2621
GIGABIT SWITCHES
6-POORTS L2 GIGABIT ETHERNET SWITCH WITH 1 GBE SFP POORT & IGMP SNOOPING
NETWORK - KTI
•
•
•
at all speeds
IGMP snooping support. (v1, v2)
High power saving
Technical specifications
Lan Ports
Type no.
KS2041
KS2042
216
: 5 x 10/100/1000 Mbps, RJ-45 + 1x 1000Mbps SFP
Supplier no.
KGS-0600-SX
KGS-0600-LX
Fiber optic port
1x Multimode duplex LC (SFP)
1x Singlemode duplex LC (SFP)
GIGABIT SWITCHES
5+1-PORT GIGABIT LAYER 2 ETHERNET SWITCH
A compact, managed 6-port Gigabit Ethernet switch which is featured with five copper ports and one mini-GBIC
(SFP) port.
•
•
•
•
Compact design.
Web management.
IGMP snooping support. (v1, v2)
Port mirroring function.
Technical specifications
Standard
Management support
Dimension (WxDxH)
Power
: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1Q
: Web browser software
: 144x104.5x26 mm
: 7.5V DC, 1A
Type no.
KS2020
Number of ports
5 Gigabit ports + 1x Gbit SFP
Supplier no.
KGS-510F-SXLC
WEB SMART 6-PORT L2 GIGABIT ETHERNET SWITCH WITH 2 FE AND 1 GBE SFP PORTS
•
•
•
•
Web based management interface
Supports SFP with Digital Diagnostic Monitoring (DMM)
IGMP snooping support. (v1, v2)
Supports 802.1w RSTP and MSTP
Technical specifications
Lan Ports
Type no.
KS2019
: 6x 10/100/1000 Mbps RJ-45, 1x 1000 Mbps SFP , 2x 100 Mbps SFP
Supplier no.
KGS-612-F
6 Gigabit ports, 2 Fast Ethernet and 1x 1Gbit SFP port
WEB SMART 8-PORT L2 GIGABIT ETHERNET SWITCH WITH 1 GBE SFP PORT
•
•
•
•
•
•
Web based management interface
Supports 802.1w RSTP and MSTP
IGMP snooping support. (v1, v2)
Port mirroring function.
High power saving
Supports SFP with Digital Diagnostic Monitoring (DMM)
Technical specifications
Lan Ports
Type no.
KS2030
: 7x 10/100/1000 Mbps RJ-45, 1x 1000 Mbps SFP
Supplier no.
KGS-810-F
8 Gigabit ports and 1x Gbit SFP port
16/24 PORT GIGABIT LAYER 2 ETHERNET SWITCH
The 24-Port 10/100/1000Base-T Gigabit Ethernet switch supports auto-negotiation and auto-MDI/MDI-X
detection. The switch supports full/half duplex transfer mode for 10/100Mbps. The system is self learning for
active MAC addresses up to 8k entries.
•
•
Store-and-Forward switching method.
Supports full-duplex transfer mode for 1000 Mbps.
Standard
Dimension (WxDxH)
Environment temperature
Power supply
: IEEE 802.3a 10 Base-T, IEEE 802.3u, 100 Base-TX, IEEE 802.3ab 1000 Base-T
: 280x180x44 mm
: Operating: 0 - +40, storage: -20 - +70 °C
: 100-240V AC
Type no.
KS2140
RJ-45 TP ports
24x shielded 10/100/1000 Mbps
Supplier no.
KGS-124
NETWORK - KTI
Technical specifications
217
GIGABIT SWITCHES
MANAGED 12+4 PORTS GIGABIT LAYER 2 ETHERNET SWITCH
The 16 port managed Gigabit Ethernet switch is a L2 switch that meets all IEEE 802.3/u/x/z Gigabit, Fast
Ethernet specifications. The switch has 12x 10/100/1000 Mbps copper ports and 4 combo ports with copper
and Gigabit SFP slots. The switch supports console CLI, Telnet CLI, Web GUI and SNMP interface for switch
management. The switch supports o.a. the following functions: Quality of Service,VLAN, IGMP and RSTP.
•
•
IGMP snooping support. (v1, v2)
Power saving support
Technical specifications
RJ-45 TP ports
Combo ports
Standard
Dimension (WxDxH)
Environment temperature
Power supply
: 12x shielded 10/100/1000 Mbps
: 4x shielded 10/100/1000 Mbps or 1000Mbps SFP slots
: IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.3af, 802.1x, 802.1w, 802.1d, 802.1q
: 443x245x43 mm
: Operating: -5 - +50, storage: -20 -+85 °C
: 100-240V AC
Type no.
KS2130
type
Managed 12+4 ports GbE switch
Supplier no.
KGS-1620
MANAGED 16+8 PORTS GIGABIT LATER 2 ETHERNET SWITCH
The KGS-2420, a 24-port managed Gigabit Ethernet switch is a standard switch that meets all IEEE 802.3
Gigabit, Fast Ethernet specifications. The switch includes 8 Combo, RJ-45/SFP ports and 16 Gigabit SFP fiber
ports. The switch can be managed through RS-232 serial console port directly or through the switched ports
using in-band CLI or Web-based interfaces or SNMP. The switch features comprehensive and useful functions
such as QoS (Quality of Service), Spanning Tree, 802.1Q VLAN, Port Link Aggregation, Bandwidth Control, Port
Security, SNMP/RMON, IGMP snooping capability via the intelligent software package. It is suitable for both
metro-LAN and office application.
•
•
•
Includes many SFP ports
Auto-Negotiation feature
Supports IP Multicasting
Technical specifications
SFP slots
Combo ports
Standard
Dimension (WxDxH)
Environment temperature
Power supply
: 16x 1000 Mbps SFP
: 8x shielded 10/100/1000 Mbps or 1000 Mbps SFP slots
: IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1Q, 802.1P
: 442x209x44 mm
: Operating: 0 - +40, storage: -20 - +70 °C
: 100-240V AC
Type no.
KS2150
type
Managed 16+8 ports GbE switch
Supplier no.
KGS-2420
MANAGED 20+4 GIGABIT LAYER 2 ETHERNET SWITCH
The 24 port managed Gigabit Ethernet switch is a L2 switch that meets all IEEE 802.3/u/x/z Gigabit, Fast
Ethernet specifications. The switch has 12/20x 10/100/1000 Mbps copper ports and 4 combo ports with copper
and Gigabit SFP slots. The switch supports console CLI, Telnet CLI, Web GUI and SNMP interface for switch
management. The switch supports o.a. the following functions: Quality of Service, VLAN, IGMP and RSTP.
•
•
IGMP snooping support. (v1, v2)
Power saving support.
NETWORK - KTI
Technical specifications
RJ-45 TP ports
Combo ports
Standard
Dimension (WxDxH)
Environment temperature
Power supply
: 20x shielded 10/100/1000 Mbps
: 4x shielded 10/100/1000 Mbps or 1000 Mbps SFP slots
: IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.3af, 802.1x, 802.1w, 802.1d, 802.1q
: 443x245x43 mm
: Operating: -5 - +50, storage: -20 - +85 °C
: 100-240V AC
Type no.
KS2132
type
Managed 20+4 port GbE switch
218
Supplier no.
KGS-2421
GIGABIT SWITCHES
MANAGED 20+4 PORTS GIGABIT LAYER 2 ETHERNET SWITCH WITH 4 SFP
The managed 24-port Stackable Gigabit Ethernet Switches are standard L2 switches that meets all IEEE
802.3/u/x/z Gigabit, Fast Ethernet specifications. The switch has 20 10/100/1000Mbps copper ports and 4
combo ports with four additional Gigabit SFP slots. The SFP slots support standard SFP fiber optical transceivers
for fiber optic application.
•
•
•
•
Provides two 5G stack ports for stacking multiple switches and single point of management
Supports power saving mode when port link down or different RJ-45 cable length.
IGMP snooping support. (v1, v2)
Supports IPv6 configuration
Technical specifications
Ports
SFP slots
Type no.
KS2136
KS2135
: 20 x 10/100/1000 Mbps, RJ-45
: 4x 10/100/1000 Mbps copper & 1000Mbps Fiber
Supplier no.
KGS-2423-PS
KGS-2423-S
Type
24-Port + 4x SFP switch with PoE support
24-Port + 4x SFP switch without PoE support
24 PORT WEB MANAGED GIGABIT LAYER 2 ETHERNET SWITCH
This switch has 24 Gigabit Ethernet ports, all these ports provide auto-negotation and auto-MDI/MDI-X detection. Examples of the possible functions are: Full wire speed forwarding, port statistics functions, VLAN and
QoS. The switch is managed by use of the console port or through a web interface.
•
IGMP snooping support. (v1, v2)
Technical specifications
Ports
Number of MAC addresses
IEEE Standard
Dimension
Assembly
Power
: 10/100/1000 Mbps, RJ-45
: 8.000 (KS 2050 4.000)
: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1Q
: 441x196x44 mm
: 19" Rack 1 HE
: 100~240V AC, 50/60 Hz
Type no.
KS2060
Number of ports
24
Supplier no.
KGS-2404
MODULAR 3 SLOT MANAGED GIGABIT LAYER 2 ETHERNET SWITCH
The 24-port managed Gigabit Ethernet switch is a standard L2 switch that meets all IEEE 802.3/u/x/z Gigabit,
Fast Ethernet applications. The switch provides three 8-port modular slots. Each slot can accomodate one 8-port
module. A variety of modules is available for selection. Any combination of three different modules can be installed flexibly in one device rack. The system detects the types of the installed modules and configures modules
automatically.
•
•
Great variety of optional modules.
IGMP snooping support. (v1, v2)
Modular slots
Standard
Dimension (WxDxH)
Environment temperature
Power supply
: 3x for 8-ports module
: IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.3af, 802.1x, 802.1w, 802.1d, 802.1q
: 443x245x43 mm
: Operating: -5 - +50, storage: -20 -+85 °C
: 100-240V AC
Type no.
KS2100
KS2104
KS2106
KS2108
KS2110
KS2112
KS2114
KS2116
KS2118
KS2120
type
Modular Managed GbE switch
8x RJ-45 TP module
8x SFP module
4x RJ-45 TP + 4x SFP module
8x MM ST module
8x MM SC module
8x SM SC module
2x RJ-45 TP + 6 xMM ST module
2x RJ-45 TP + 6x MM SC module
2x RJ-45 TP + 6x SM SC module
Supplier no.
KGS-2422
KGS-2422-8GT
KGS-2422-8GX
KGS-2422-8G4
KGS-2422-8FX-T
KGS-2422-8FX-C
KGS-2422-8FX-SL2
KGS-2422-8FM-T
KGS-2422-8FM-C
KGS-2422-8FM-SL2
NETWORK - KTI
Technical specifications
219
GIGABIT SWITCHES
MANAGED 28-PORT GIGABIT ETHERNET SWITCH WITH 24 SFP PORTS AND 4 10G SFP+ PORTS
KGS-2800 provide 24 ports 100/1000Mbps SFP + 4 ports Combo Gigabit TP poorts and 4 ports 1G/10G SFP+
in a single device.
•
•
•
•
•
•
SFP supports Dual speed 100/1000Mbps.
SFP+ supports dual speed 1000Mbps/10G.
Web/Telnet/SNMP console management
IGMP snooping support. (v1, v2)
STP/RSTP/MSTP support.
Support IPv6/IPv4 dual stack.
Type no.
KS2151
Supplier no.
KGS-2800
Type
24 SFP ports and 4x 10Gbit SFP+ ports
SFP TRANSCEIVERS
SFP TRANSCEIVER MODULE MULTIMODE 2 KM
Many KTI switches are currently equipped with optional SFP inputs. Via these SFP inputs you can improve the
flexibility of the switch you use and you can choose which module to use for what application. This product is a
SFP fiber transceiver module without DDM support Multimode 2 km. Suitable for Fast Ethernet SFP slots.
Technical specifications
Ethernet type
Connector type
Fiber type/ distance
Operating temperature
Speed
: Fast Ethernet
: LC Duplex , 100 Base FX
: Multimode 2 km
: 0 °C~70 °C
: 155 l/s
Type no.
KS1082
Type
SFP module MM
Supplier no.
SFP-FC-M-A
SFP TRANSCEIVER MODULE SINGLEMODE 30 KM
Many KTI switches are currently equipped with optional SFP inputs. Via these SFP inputs you can improve the
flexibility of the switch you use and you can choose which module to use for what application. This is a SFP fiber
transceiver module without DDM support Singlemode 30 km. Suitable for Fast Ethernet SFP slots.
Technical specifications
Ethernet type
Connector type
Fiber type/ distance
Operating temperature
Speed
: Fast Ethernet
: LC Duplex
: Singlemode 30 km
: 0 °C~70 °C
: 155 l/s
Type no.
KS1083
Type
SFP Module SM
Supplier no.
SFP-FC-S30-A
SFP TRANSCEIVER MODULE SINGLEMODE 20 KM
Many KTI switches are currently equipped with optional SFP inputs. Via these SFP inputs you can improve the
flexibility of the switch you use and you can choose which module to use for what application. This is a SFP fiber
transceiver module set 1.25 of Gbps Singlemode 20 km. Suitable for Gigabit Ethernet SFP slots.
•
WDM, for over single fiber
NETWORK - KTI
Technical specifications
Ethernet type
Connector type
Fiber type/ distance
Operating temperature
Speed
: Gigabit Ethernet
: LC Simplex, 1000 Base LX
: Singlemode 20 km
: 0 °C~70 °C
: 1.25 Gbps
Type no.
KS1104
KS1105
Nm value
Tx1310nm/Rx1550nm
Tx1550nm/Rx1310nm
220
Supplier no.
SFP-GLS-W3520-A
SFP-GLS-W5320-A
SFP TRANSCEIVERS
SFP TRANSCEIVER MODULE SINGLEMODE 40 KM
Many KTI switches are currently equipped with optional SFP inputs. Via these SFP inputs you can improve the
flexibility of the switch you use and you can choose which module to use for what application. This is a SFP fiber
transceiver module set 1.25 Gbps Singlemode 40 km. Suitable for Gigabit Ethernet SFP slots.
•
WDM, for over one single fiber
Technical specifications
Ethernet type
Connector type
Fiber type/ distance
Operating temperature
Speed
: Gigabit Ethernet
: LC Simplex, 1000 Base LX
: Singlemode 40 km
: 0 °C~70 °C
: 1.25 Gbps
Type no.
KS1106
KS1107
Wavelength
Tx1310nm/Rx1550nm
Tx1550nm/Rx1310nm
Supplier no.
SFP-GLS-W3540-A
SFP-GLS-W5340-A
1000 BASE SFP MODULE
The KTI SFP modules can be used in switches and media converters which can use a 1000Base SFP module.
Technical specifications
Connector type
: LC Duplex
Type no.
KS1087
KS1088
Mode
Multimode SX
Singlemode LX
Supplier no.
SFP-GLM-A
SFP-GLS-10-A
10G SFP+ TRANCEIVER MULTIMODE FIBER, LC, 300M.
Technical specifications
Ethernet type
Connector type
Fiber type/distance
Operating temperature
: 10G//GbE/FE
: LC Duplex
: Multimode OM3 / 300m
: -10 °C~70 °C
Type no.
KS1110
Wavelength
850nm
Supplier no.
SFP-10G-SR-A
10G SFP+ TRANCEIVER SINGLE-MODE FIBER, LC , 10KM.
Technical specifications
Ethernet type
Connector type
Fiber type/distance
Operating temperature
: 10G//GbE/FE
: LC Duplex
: Single-mode 10 km
: -10 °C~70 °C
Type no.
KS1111
Wavelength
1310nm
Supplier no.
SFP-10G-LR-A
10G SFP+ TRANCEIVER SINGLE-MODE FIBER, LC, 40KM.
Technical specifications
Ethernet type
Connector type
Fiber type/distance
Operating temperature
: 10G//GbE/FE
: LC Duplex
: Single-mode 40 km
: -10 °C~70 °C
Type no.
KS1112
Wavelength
1310nm
Supplier no.
SFP-10G-LR40-A
10G SFP+ TRANCEIVER SINGLE-MODE FIBER, LC, 80KM.
Ethernet type
Connector type
Fiber type/distance
Operating temperature
: 10G//GbE/FE
: LC Duplex
: Single-mode 80 km
: -10 °C~70 °C
Type no.
KS1113
Wavelength
1310nm
Supplier no.
SFP-10G-ZR-A
NETWORK - KTI
Technical specifications
221
NETWORK MEDIA CONVERTERS
TWISTED PAIR / FIBER MEDIA CONVERTER
This standalone media converter converts both media type and speed of the connection.
The media converter is able to convert at full wire speed. By supporting the 'link fault pass through' and 'far end
fault' functions, the media converter can report signal loss and connection problems, preventing data loss. Each
standalone media converter can easily be placed in a converter center (KC 1040 series).
Technical specifications
Indication LEDs
TP port
FX port
Power supply
Dimension
: Power, TP link/act, TP speed, TP duplex status, FX link/act, FX signal
: 10Base-T, 100Base-TX, STP RJ-45
: 100Base-FX, far end fault function
: +5V~+12V DC (supplied)
: 108x72.5x23 mm
Type no.
KC1020
KC1022
KC1024
KC1026
Fiber optic interface
Multimode - ST
Multimode - SC
Multimode - MTRJ
Singlemode - SC
Supplier no.
KC-300D-T
KC-300D-C
KC-300D-JM
KC-300D-SL2
1000BASE TWISTED PAIR / FIBER MEDIA CONVERTER
The Gigabit media converter is designed to convert 1000Base-T signals to/from 1000Base-X fiber signals. It
is used to extend the connection distance between two Gigabit Ethernet devices via fiber cable transparently
with no performance degradation. With the SFP (Mini-GBIC) connector design, the media converter not only
supports existing variety of multimode and singlemode fibers, but also preserves the flexibility to adapt to
any change of your fiber network in the future. It also supports center chassis installation with optional power
redundancy and management features when a larger fiber network is required. With pre-configured fiber transceivers, the converter also can support Bi-Di WDM and CWDM fiber network applications.Note: this product is
delivered without SFP module. The module has to be ordered seperately.
Technical specifications
Function
Type no.
KC1047
: For converting 1000 Base T signals in 1000 Base X signals and vice versa
Supplier no.
KGC300
Ouput interface
SFP slot
GIGABIT MEDIA CONVERTER
A managed Gigabit Media Converter which is featured with 10/100/1000M copper port and mini-GBIC (SFP)
port.
•
•
•
SFP fiber port flexibility.
Traffic control functions.
Optional Din-Rail mounting.
Technical specifications
Standard
Network cable
Mounting
Power
Management
Dimension (WxDxH)
: IEEE 802.3, 802.3u, 802.3ab, 802.3z
: CAT5E or higher
: Desktop, Wall, Din-Rail (optional), Center chassis
: +5 V~+12V DC
: Web-based browser interface
: 108x72.5x23 mm
Type no.
KC1053
Type
Gigabit Media Converter
Supplier no.
KGC-310M
FIBERMODE CONVERTER
This mode converter converts multimode signals to singlemode and the other way around. Conversion from
1000 Base Sx to 1000 Base Lx, 100 Base Fx to 100 Base Fl and visa versa are supported. The SFP modules have
to be ordered separately.
NETWORK - KTI
Technical specifications
Function
Type no.
KC1052
222
: For converting singlemode to multimode signals
Supplier no.
KGC-311
Type
Mode converter
NETWORK MEDIA CONVERTERS
MEDIA CONVERTER CHASSIS 19"
The chassis is a simple 19" rack mountable chassis for KTI's media converter devices. It provides four slots for
installation of four standalone media converters.
•
•
Deliverd without media converters
Suitable for KC1020, KC1022, KC1024, KC1026, KC1047, KC1052, KC1053.
Type no.
KC1054
Supplier no.
KCR-4MC
Type
4-slot media converter chassis
MANAGED MEDIA CONVERTER CENTER 16 PORT
The intelligent media converter center provides 16 slots for standalone media converters of the KC1020 series.
Managed: the managed media converter centers provide management through telnet, web and SNMP. These
media converter centers also support software upgrade through TFTP.
Technical specifications
Indication LEDs
Power input
Dimension
Weight
Assembly
: Power, CPU status, Fan status, Console RX status, port link status
: 90-264V AC or 48V DC
: 443x88x300 mm
: 5.5 kg
: 19" Rack, 2 HE
Type no.
KC1040
KC1041
KC1042
KC1043
Type
Managed Media Converter Center, Power input AC
Managed Media Converter Center, Power Input DC
Media Converter Center, Power input AC
Media Converter Center, Power input DC
Supplier no.
KC-1300/1A
KC-1300/1D
KC-1300L/1A
KC-1300L/1D
10/100BASE-TX TO 100BASE-FX MEDIA CONVERTER
Compact, Plug and Play
Auto-negotiation 10/100 Mbps and Auto-crossover
Far End Fault function on FX (fiber) port
Type no.
KC1080
KC1081
KC1082
Supplier no.
KFC-200T
KFC-200C
KFC-200-SL2
NETWORK - KTI
•
•
•
Type
Multimode duplex ST
Multimode duplex SC
Singlemode duplex SC
223
POE EQUIPMENT
MID-SPAN POE INJECTOR
When a network device, like an acces point, media converter or IP telephone, needs to be powered through
PoE (Power over Ethernet) it is required that the Ethernet switch supports this too. The KW9020 can be used to
provide the neccesary power on the network cable if this is not the case.
•
•
•
Plug and play functionality.
Power shutdown protection.
Compact design.
Technical specifications
Compliance
Dimension
Type no.
KW9020
KW9021
: KW9021: IEEE802.3af standard, KW9021 IEEE802.3at
: 50x80x21 mm
Supplier no.
KPOE-100
KPOE-100P
Power output
15.4W
30W
POE-PD-ENABLED 10/100BASE-TX TO 100BASE-FX MEDIA CONVERTERS
The 350 series are designed to convert 10Base-T or 100Base-T signals to/from 100Base-FX fiber signals. They
are used to extend the connection distance between two Ethernet devices via fiber cable transparently with no
performance degradation. The variety of fiber options supported includes not only multimode, short reach up to
long reach single mode fibers, but also Bi-Di WDM and CWDM fiber network applications. Because of 802.3af
compliance, the converters can draw the power via Cat.5 cable connected to a PoE PSE switch or mid-span
injector. This feature makes the converter ideal for remote areas of a network without AC power outlets
•
•
•
•
Smart forwarding which can auto adapt the conversion to get the minimum latency according to
Link fault pass through between two different media cables
Transparent conversion for 802.1Q tagged packets
Far end fault function on the fiber connection
Type no.
KS3050
KS3051
KS3052
Supplier no.
KC-350-T
KC-350-C
KC-350-SL2
Fiber optic port
1x Multimode duplex ST
1x Multimode duplex SC
1x Singlemode duplex SC
POE-PD-ENABLED 10/100BASE-TX TO 100BASE-FX MEDIA CONVERTERS
NETWORK - KTI
The 350 series are designed to convert 10Base-T or 100Base-T signals to/from 100Base-FX fiber signals. They
are used to extend the connection distance between two Ethernet devices via fiber cable transparently with no
performance degradation. The variety of fiber options supported includes not only multimode, short reach up to
long reach single mode fibers, but also Bi-Di WDM and CWDM fiber network applications. Because of 802.3af
compliance, the converters can draw the power via Cat.5 cable connected to a PoE PSE switch or mid-span
injector. This feature makes the converter ideal for remote areas of a network without AC power outlets
•
•
•
•
•
remote loop back test & remote TP link monitoring
Smart forwarding which can auto adapt the conversion to get the minimum latency according to
Link fault pass through between two different media cables
Transparent conversion for 802.1Q tagged packets
Support being powered by PoE via Cat.5 in addition to typical AC power adapter
Type no.
KS3060
KS3061
KS3062
224
Supplier no.
KC-351-T
KC-351-C
KC-351-SL2
Fiber optic port
1x Multimode duplex ST
1x Multimode duplex SC
1x Singlemode duplex SC
POE EQUIPMENT
POE-PD-ENABLED 1000BASE-TX TO 1000BASE-X GIGABIT MEDIA CONVERTERS
The Gigabit media converter is designed to convert 1000Base-T signals to/from 1000Base-X fiber signals. It
is used to extend the connection distance between two Gigabit Ethernet devices via fiber cable transparently
with no performance degradation. With the SFP (Mini-GBIC) connector design, the media converter not only
supports existing variety of multimode and single mode fibers, but also preserves the flexibility to adapt to
any change of your fiber network in the future. It also supports center chassis installation with optional power
redundancy and management features when a larger fiber network is required. With pre-configured fiber transceivers, the converter also can support Bi-Di WDM and CWDM fiber network applications.Because of 802.3af
compliance, the converters can draw the power via Cat.5 cable connected to a PoE PSE switch or mid-span
injector. This feature makes the converter ideal for remote areas of a network without AC power outlets.
•
•
•
Comply with IEEE 802.3ab 1000Base-T, 802.3z 1000Base-SX/LX standard
1000Mbps conversion with a minimum and the best latency
Support transparent conversion of any packet types with no packet length limitation
Type no.
KS3070
KS3071
Supplier no.
KGC-352-SX
KGC-352-LX
Fiber optic port
1x Multimode duplex SC (SFP)
1x Singlemode duplex SC (SFP)
MANAGED 10/100/1000BASE-T TO DUAL-SPEED FIBER GIGABIT MEDIA CONVERTER (WITH POE+)
Tri-speed 10/100/1000Mbps copper to dual-speed 100/1000Mbps fiber conversion.
•
•
•
•
Web-based and SNMP configuration management
Support Jumbo frame conversion
Support IGMP snooping
(depends on model)
Type no.
KS3075
KS3076
KS3084
KS3085
KS3086
Supplier no.
KGC-320-SX
KGC-320-LX
KGC-320-HP
KGC-320-HP-SX
KGC-320-HP-LX
Type
without PoE support, fiber port multimode duplex LC
without PoE support, fiber port singlemode duplex LC
PoE+ PSE support, SFP port
PoE+ PSE support, Fiberport multimode duplex LC (SFP)
PoE+ PSE support, Fiberport singlemode duplex LC (SFP)
MODULAR 8-PORT MIDSPAN POE INJECTOR
Instead of replacing switches to PoE compatible switches this PoE injector can be used to add PoE to multiple
Ethernet connections. The PoE injector can easily be mounted in a server or network cabinet with the seperate
available mounting brackets. Based on the number of power modules in this PoE injector, it can be used in situations with different power requirements.
•
•
•
•
Hot-plug support.
Cost effective modular system.
PoE shut down protection.
Full IEEE802.3af compliant.
Network compatibility
Network in
Network out
Power in
Measurements
: Ethernet, Fast Ethernet, Gigabit Ethernet
: 8x shielded RJ-45
: 8x shielded RJ-45
: 1x C14
: 238x190x43 mm
Type no.
KW9081
KW9082
Power modules
1
2
Supplier no.
KPOE-800-1P
KPOE-800-2P
NETWORK - KTI
Technical specifications
225
POE EQUIPMENT
OPTIONAL POWER MODULE FOR MODULAR 8-PORT MIDSPAN POE INJECTOR
Expand the power supply capabilities of a modular 8-port midspan PoE injector with only one power module
installed.
Type no.
KW9080
Supplier no.
KPOE-800P60W
Power output
60W
19" MOUNTING BRACKET FOR MODULAR 8-PORT MIDSPAN POE INJECTOR
Mount either one or two (depending on the bracket model) modular 8-port midspan PoE injector(s) in a 1U
space of a network- or server cabinet.
Technical specifications
Bracket height
Type no.
KW9083
KW9084
: 1U
Supplier no.
KPOE-800-BRACKET1 1
KPOE-800-BRACKET2 2
INDUSTRIAL NETWORK PRODUCTS
10/100 UNMANAGED SWITCH
Unmanaged switch with 10/100Mbps copper ports for Ethernet and Fast Ethernet. With the featured autonegotiation function, the switch can detect and configure the connection speed and duplex automatically. The
switch also provides auto MDI/MDI-X function, which can detect the connected cable and switch the transmission wire pair and receiving pair automatically. This auto-crossover function can simplify the type of network
cables used.
•
•
•
Wide operating temperature range for critical environment.
Industrial-rated Emission and Immunity performance.
Provide two power input types to meet more application needs.
NETWORK - KTI
Technical specifications
IEEE Standard
Dimensions
Mounting
Power Supply
Operating temperature
: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX std.
: 48x80x95 mm
: DIN-Rail
: 7 - 30V, DC
: -35 ~ +70 °C
Type no.
KS3000
KS3001
KS3002
LAN ports
5 x 10/100 Mbps, RJ-45
8 x 10/100 Mbps, RJ-45
16 x 10/100 Mbps, RJ-45
226
Supplier no.
KFS-0540
KFS-0840
KFS-1640-L
INDUSTRIAL NETWORK PRODUCTS
FAST ETHERNET SWITCHES
KSD-800 is an 8-port switch designed with the capability of taking wider range of power input and environmental temperature. In addition to the 8x 10/100Mbps ports for client groups, it has an 100Mbps Fiber port for
remote network connection. With many unique characteristics, KSD-800 is the ideal solution for environmental
critical projects where stability is the #1 priority.
•
•
•
•
Supports extended temperature range.
Fiber ports support 'Far end Fault' to prevent data loss.
Suitable for DIN-Rail and wall mounting.
Very reliable.
Technical specifications
Speed
Power supply
Dimension
TP Ports
Category UTP
: 10/100 Mbps
: +7~30V DC, not supplied
: 140x106x40 mm mm
: STP RJ-45, auto negotiation, auto-MDI/MDI-X
: CAT5E
Type no.
KS3010
KS3012
KS3014
KS3016
Number of ports
8 twisted pair
7 twisted pair + 1 x ST MM
7 twisted pair + 1 x SC MM
7 twisted pair + 1 x SC SM
Supplier no.
KSD-800
KSD-800-IT
KSD-800-1C
KSD-800-1SL2
10/100 UNMANAGED SWITCH WITH POE
The switches are 5-port Fast Ethernet switches which are featured with four copper ports and one combo port.
The combo port comes with one RJ-45 and one SFP slot. The SFP slot can be mounted with a fiber transceiver
optionally to support a fiber connection.
The switch configured with PoE function on Port 1 to Port 4.
Technical specifications
LAN Ports
Mounting
Power Supply
Operating temperature
: 4 x 10/100 Mbps, RJ-45 + 1x combo RJ-45/SFP
: DIN-Rail
: 6 - 57 VDC
: -20 ~70 °C
Type no.
KS3003
KS3004
KS3005
Type
With PoE
With PoE+
Without PoE
Supplier no.
KSD-541P
KSD-541-HP
KSD-541
MANAGED FAST ETHERNET LAYER 2 SWITCHES
The KSD800M switch is an industrial rated managed DIN rail switch, which is capable to operate in a more
critical environment where temperature and power fluctuates at wider range. Additionally, KSD-800M offers
two power input options, either AC-DC power adapter or via the screwed terminator block. Special features,
including VLAN, QoS, and Port Control are configurable via SNMP, Telnet, web, and event traps remote
management. All these designs are aimed to provide reliable network service and meeting your projects special
requirements.
•
•
•
•
•
Supports extended ambiant temperatures of -20 °C to 70 °C.
Fiber ports support ' Far end Fault' to prevent data loss.
Supports VLAN, QoS and Port Control.
Management via SNMP, Telnet, event traps and webinterface.
Suitable for DIN-Rail and wall mounting.
Speed
Power supply
Dimension
TP Ports
Category UTP
: 10/100 Mbps
: +7~30V DC
: 140x106x40 mm mm
: STP RJ-45, auto-negotiation, auto-MDI/MDI-X
: CAT5E
Type no.
KS3020
KS3022
KS3024
KS3026
Number of ports
8 twisted pair
7 twisted pair + 1 x ST MM
7 twisted pair + 1 x SC MM
7 twisted pair + 1 x SC SM
Supplier no.
KSD-800M
KSD-800M-1T
KSD-800M-1C
KSD-800M-1SL2
NETWORK - KTI
Technical specifications
227
INDUSTRIAL NETWORK PRODUCTS
INDUSTRIAL IP66/IP67 FAST ETHERNET L2 SWITCH
KTI’s KGS-0860 IP66/67 switch series offers a diverse range of managed Ethernet switches with the ruggedized hardware design for protection against strong jets of water and temporary immersion in water. The series
includes a variety of 8-ports switches featured with different configurations composed of Fast Ethernet ports and
Gigabit Ethernet ports. The available port types are copper port, fiber optical port and combo port with dualmedia support (copper and fiber optical).
In addition to standard direct power input, the series provides optional solution that the switch can be powered
over network cable instead of direct power input. This way called “Power over Ethernet” allows the switch receives electric power along with data from the connected network cable and the switch can be installed in place
where power is not present. Not only PoE powered switch solutions the series also offers PoE power sourcing
switches which can deliver power to other switches over the connected cables. It provides a complete and diversified solutions for PoE deployment with the IP66/67 switches.
Designed to operate reliably in harsh industrial environments the series provides a high level of immunity to
electromagnetic interference and heavy electrical surges usually found in industrial environments. An operating
temperature range of -30°C to +70°C coupled with IP66/67 rated waterproof design allows the switches to be
installed in any locations virtually.
To meet requirements for advanced applications, the switch series provides advanced layer 2 network functions,
a variety of management interfaces enhanced with security features, and a full array of useful functions for high
network availability and manageability. Featured with the ruggedized hardware design, the KGS-0860 series
provides ideal solutions for any harsh environments, such as strong vibrations, extreme temperatures and wet or
dusty conditions.
•
•
•
•
•
•
Support IGMP snooping function
Waterproof enclosure design, LAN port connectors and power connector
Port mirroring function
Support jumbo frame up to 9.6K bytes
Support 802.1w RSTP, 8021D STP and MSTP for preventing loop connection
Support redundant ring applications with enhanced industrial RSTP
Type no.
KS3115
Supplier no.
KGS-0841-W
Type
8x 10/100 Fast Ethernet ports
INDUSTRIAL GIGABIT ETHERNET LAYER 2 SWITCH
Industrial Gigabit Ethernet switch with 5x 10/100/1000 Mbps ports and Gigabit SFP slot.
Industrial rated wide temperature range and immunity performance.
Be aware this product willbe delivered without SFP module. You can order this separately.
•
•
•
•
Can be mounted on Panel, DIN-Rail or wall.
Functions within very large temperature range.
IGMP snooping support.
Compact design.
Technical specifications
Speed
Power supply
Category UTP
Norm
Material housing
: 10/100/1000 Mbps
: External
: CAT5E
: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1Q
: Metal
Type no.
KS3100
Number of ports
5
Supplier no.
KGD-600
INDUSTRIAL 8-PORT L2 GIGABIT ETHERNET SWITCH WITH 2 SFP AND 4 POE PSE PORTS
NETWORK - KTI
•
•
•
•
•
In-band web and SNMP management interfaces
port mirroring function
Supports 802.1w RSTP, 8021D STP and MSTP
Supports SFP with Digital Diagnostic Monitoring (DDM)
Provides optional four 802.3af-compliant PoE PSE ports
Technical specifications
Lan ports
Mini-GBIC SFP
: 6x 10/100/1000 Mbps RJ-45.2x SFP
: Gigabit 1000Base-x compliant SFP connector
Type no.
KS3006
KS3007
PoE
No
PoE
228
Supplier no.
KGD-802-B
KGD-802-B-P
INDUSTRIAL NETWORK PRODUCTS
INDUSTRIAL MEDIA CONVERTERS TP TO FIBER
Industrial media converters TP to fiber
These industrial media converters offer industrial reliability at transforming copper to fiber Ethernet. These industrial media converters can not only convert the media type, but also the speed of the connection. By supporting
the 'link fault pass through' and 'far end fault' functions the media converters can report signal loss and connection problems, this will prevent data loss. With the wide configuration possibilities these converters fits always to
the required application. It is provided including DIN rail mounting bracket.
KC 1030 - Industrial media converter twisted, pair to multimode ST fiber
KC 1032 - Industrial media converter twisted, pair to multimode SC fiber
KC 1034 - Plane mounting bracket
KC 1036 - Power supply: Primary 230V AC 50Hz, secondary 7.5V DC, 1A
•
•
Extended configuration options.
Including DIN Rail mounting bracket.
Technical specifications
Smart-forward method
Transparant conversion
TP Port
Wavelength
Cables
FX Parameters
Mounting
Power
Power consumption
Ambiant temperature
: 10M>100M Store-and-Forward, 100M>100M Direct convertion
: Standard IEEE 802.3 Ethernet frames, IEEE 802.1Q frames
: STP RJ-45, auto MDI/MDI-X crossover, auto-negotiation, full and half duplex
: 1310 nM
: MMF 50/125 um, 62.5/125 um fiber cable
: Tx power: -19 tot -14 dBm, Rx input power: -14 dBm min.-34 dBm max.
: DIN Rail, Plane
: +7V~30V DC, not supplied
: 2.6 W Max
: -10 °C to 60 °C, 5%-95%, non-condensing
Type no.
KC1030
KC1032
Kind
MM-ST
MM-SC
Supplier no.
KCD-300-T
KCD-300-C
INDUSTRIAL COMPACT MEDIA CONVERTERS TP TO FIBER
Technical specifications
Conversion
Conversion Methodes
Copper port
Fiber Port
Packet size
Mounting
Power
Type no.
KC1070
KC1071
KC1072
Supplier no.
KC1070
KC1071
KC1072
: 10BASE/T to 100BASE/FX, 100BASE/TX to 10/100BASE/T Auto to 1000BASE/FX
: Cut-through para 100 Mbps a 100 Mbps con la menor latencia,
Store-and-forward para conversion 10 Mbps a 100 Mbps, Auto mode-switching.
: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX shielded RJ-45 jacks
with Auto MDI/MDI/X detection and Auto negotiation for speed and duplex.
: IEEE 802.3 100BASE/FX compliant, Forced 1000 Mbps, Full duplex, Far end fault function.
: Up to 1536 bytes for 10 Mbps to 100 Mbps conversion and no limit for 100 Mbps to 100 Mbps conversion.
: DIN Rail
: +4.5 V~50V DC, not supplied
Type
Multimode duplex ST 62.5/125 um, 50/125 um
Multimode duplex SC 62.5/125 um, 50/125 um
Singlemode duplex SC9/125 um
ACCESSORIES FOR INDUSTRIAL MEDIA CONVERTER
Accessoires for Industrial media converter
Technical specifications
Type no.
KC1034
KC1037
: KC1030, KC1032
Supplier no.
KCD-3PB
PA-7.5V-1.2A
NETWORK - KTI
Suitable for
Type
Bracket
Poweradapter 7.5 V / 1.2 A
229
INDUSTRIAL NETWORK PRODUCTS
INDUSTRIAL 3-PORTS L2 FAST ETHERNET MEDIA CONVERTER SWITCH
The industrial rated KSD-103 Fast Ethernet switch series supports three switching-base segment communications
and benefit the following applications and make fiber deployment easier:
- Copper to fiber bridging converter
- Multimode fiber to single mode fiber bridging converter
- Fiber cable extender
- Cascaded fiber networking
Technical specifications
Ambiant Temperature
: -20 °C to 70 °C
Type no.
KS3030
KS3031
KS3032
KS3033
Fiber optic port(s)
1 x Multimode ST duplex
1 x Multimode SC duplex
1 x Singlemode SC duplex
1 x Multimode SC duplex and 1 x Singlemode SC duplex
Supplier no.
KSD-103-A-T
KSD-103-A-C
KSD-103-A-SL2
KSD-103-B-C1SL2
INDUSTRIAL 1000BASE-T TO 1000BASE-X GIGABIT MEDIA CONVERTER
•
•
•
•
•
•
Plug and play design with no configuration setting
Wide operating temperature range for temperature critical environment
Provide two power input types to meet more application needs
Support DIN-Rail mounting and panel mounting
Accept wide power input voltage range for application flexibility
Industrial-rated Emission and Immunity performance
Technical specifications
Lan port
Ambiant Temperature
: 1000 Mbps RJ-45
: -20 °C to 70 °C
Type no.
KS3040
KS3041
Fiber optic port
1x Multimode duplex LC (SFP)
1x Multimode duplex of singlemode LC (SFP)
Supplier no.
KCD-400-SX
KCD-400-LX
RS-232 CONVERTER
The converter is designed to provide the most versatile connection possible between two RS-232 serial equipment using fiber optic cable. It allows any two pieces of serial equipment to communicate full-duplex over
typical duplex fibers, or over optional single fiber up to 20km. The converter supports transparent conversion
for not only RS-232 data lines, but also all RS-232 control signals. It also supports all RS-232 baud rates with no
need for user configuration. The Din-rail mountable design makes it ideal for industrial cabinets and enclosures.
NETWORK - KTI
•
•
Also suitable for control signals.
Support for all RS-232 baudrates.
Technical specifications
FO Port
Model
Power supply
Designed for
Type no.
KC1100
230
: SC
: DIN Rail
: External
: Communication between RS232 serial devices full duplex over fiber cable
Supplier no.
KSC-200C
Input interface
D-Sub 9-pin (female)
INDUSTRIAL NETWORK PRODUCTS
INDUSTRIAL IEEE 802.3AT HIGH POWER POE+ SPLITTER
KTI Network's KPW-T2P25 is a high power PoE splitter which integrates Power over Ethernet (PoE) technology
to PoE incapable network device by just using a single Cat.5 cable for both power and data transaction.
The splitter is equipped with DIP SW that allows user to select one from five different classes for demanding
power from a remote PoE switched port or mid-span injector. This feature supports efficient power management
at the PSE side. It supports Type 1 PSE for power up to 13 Watts and Type 2 PSE for power up to 30 Watts.
For industrial applications, the splitter is also equipped with optional brackets for Din-Rail mounting and panel
mounting. To enhance application safety, the splitter is featured short-circuit protection, low voltage lock out,
inrush current limit and thermal protection.
There are optional models with different DC output voltages, 5V/9V/12V.
•
•
•
IEEE 802.3at and 802.3af compliance
Regulated DC power output
Power class selection DIP for demanding power from PSE
Type no.
KS3037
KS3034
KS3035
KS3036
Supplier no.
PMB-303
KPW-T2P25-5V
KPW-T2P25-9V
KPW-T2P25-12V
Type
Panel mounting bracket
High Power PoE splitter 5 V DC
High Power PoE splitter 9 V DC
High Power PoE splitter 12 V DC
DIN-RAIL POWER SUPPLY 12V/1.8 A
•
•
•
Protected against short circuits, overload and over voltage.
UL60601-1/IEC60601-1/EN60601-1 safety approved internal power module.
IEC60950-1 safety approved for power supply.
Technical specifications
Output voltage
Input Voltage
Input connectors
Output connectors
Operating temperature
: 12 V
: 110 ~ 240 VAC
: IEC320 C14 socket, terminal block
: Terminal block 4P (2 pair): Vout+ / Vout- / Vout+ / Vout-, DC plug
: -40 ~ +70 °C
Type no.
KS3912
Output current
1.80A
Supplier no.
KPW-2012-D-E
POWER SUPPLY FOR POE/POE+ APPLICATIONS, 1U RACK MOUNTABLE
External power supply for typical PoE & high power PoE+ switches or systems
lGeneral power supply for critical temperature environments
lGeneral power supply for 19” rack-mount systems
•
•
Protections: Short circuit / Overload / Over voltage / Over temperature
High efficiency up to 89%
AC input voltage
DC output
Temperature range
: 100 ~ 264VAC, 50/60Hz
: +48VDC, +52VDC, +54VDC, depends on model.
: -40 ~ +70 °C
Type no.
KS3914
KS3915
KS3916
KS3917
Type
48 V DC / 300 W
52 V DC / 300 W
48 V DC / 1000 W
52 V DC / 1000 W
Supplier no.
KPW-300T-48
KPW-300T-52
KPW1000T-48
KPW1000T-52
NETWORK - KTI
Technical specifications
231
PCI NETWORK CARD
KTI GIGABIT SFP SLOT PCI CARD
The ideal adapter at places where high network speeds need to be realised. By the support of both the 32 and
64-bit PCI interface according various PCI standards, this network adapter can be universally used. Easy to install
via the Plug & Play installation. Supports PCI 2.2 Wake-On-Lan for starting a PC remotely.
•
•
Supports both 32-bit and 64-bit PCI interface
Easy to install
Technical specifications
Bracket format
Interface
Internal connectors
OS support
Speed
: Normal
: PCI 2.3
: None
: Linux, Windows 2000 / 2003 / XP/ Vista/7 (32 & 64 bit), Netware server
: 1000
Type no.
KN1054
External connectors
Depends on SFP module
Supplier no.
KG-500F
ANTENNAS
OMNI ANTENNE 7 DBI
Antenne for both 11 Mbps and 54 Mbps access points. If your access point contains an external antenna connection, you can expand the reach of the transmission.
•
Can be used indoor and outdoor.
Technical specifications
Lineair
Frequency
Impedancy
VSWR
Max. power
Connection
Diameter
Length
Type no.
KW9001
: V or H
: 2400-2483.5 MHz
: 50 Ohm
: < 2.0
: 20 Watt
: N Female
: 20 mm
: 400 mm
Supplier no.
OE-001
Gain
7 dBi
PANEL ANTENNE 12 DBI
Antenne for both 11 Mbps and 54 Mbps access points. If your access point contains an external antenna connection, you can expand the reach of the transmission. This antenna is direction sensitive.
•
Can be used indoor and outdoor.
NETWORK - KTI
Technical specifications
Lineair
Frequency
Impedancy
VSWR
Max. power
Connection
Dimension
Type no.
KW9002
232
: V or H
: 2400-2483.5 MHz
: 50 Ohm
: < 2.0
: 10 W
: N Female
: 166x140x30 mm
Supplier no.
PA-M01
Gain
12 dBi
ANTENNAS
OMNI DIRECTIONAL ANTENNA 12DBI
By the strengthening of 12 dBi the range of your access point increases considerably in all horizontal directions.
The antenna can easily be connected to each wireless device with an external antenna connection. This antenna
is suitable for all 802.11b/g wireless networks and associated "turbo" alternatives.
Attention! Maximum emission should not exceed 100 mW.
•
Can be used indoor and outdoor.
Technical specifications
Polarization
Frequency
Impedancy
VSWR
Connection
Gain
Dimension
Weight
Ambiant temperature
: Vertical
: 2400-2483.5 MHz
: 50 OHm
: < 2.0
: N-type female
: 10 W
: 30 x 960 mm
: 440 g
: -30 °C to 60 °C
Type no.
KW9006
Gain
12 dBi
Supplier no.
OE-003
YAGI ANTENNA 12DBI
By the strengthening of 12 dBi the range of your access point increases considerably in one direction. With this
antenna it is possible the range of your access point in one stipulated considerably direction to increase. The
antenna can easily be connected to each wireless device with an external antenna connection. This antenna is
suitable for all 802.11b/g wireless networks and associated "turbo" alternatives.
Attention! Maximum emission should not exceed 100 mW
•
Can be used in and outdoor.
Technical specifications
Lineair
Frequency
Impedancy
VSWR
Connection
Max. power
Dimension
Weight
Ambiant temperature
: V or H
: 2400-2483.5 MHz
: 50 OHm
: < 1.5
: N-type female with cable
: 50 Watt
: 76x446 mm
: 1040 g
: -30 to 60 °C
Type no.
KW9004
Gain
12 dBi
Supplier no.
YA-R03
WIFI DOME ANTENNE
This antenna has a magnet foot and strenghtens the signal of your wireless network with 5 dBi. The antenna
isn't direction sensitive.
Cable length
Connector
Frequency range
Temperature range
: 1.5 m
: Reverse SMA male
: 2.5 - 2.7 GHz
: -30 ~ +60 °C
Type no.
KW9005
Gain
5 dBi
Supplier no.
CAW-01500-01-9
NETWORK - KTI
Technical specifications
233
FAST ETHERNET SWITCHES
Eminent SOHO Networking
With its networking products, Eminent focuses on the home and small business segment.
Eminent products are designed for everyday use where reliability and ease of installation
are paramount. Eminent has its own support desk for professional resellers and consumers.
Eminent networking products come with a 5 year warranty. The range consists of network
adapters, switches and routers.
MINI NETWORK SWITCH 10/100 MBPS
The Eminent 5 Port Network Switch allows you to set up a network fast and easy. The network switch has 5
independent 10/100 Mbps ports supporting full-wire speed transmissions in half or full duplex modes. Do you
wish to offer quick network or Internet access to all users? The network switch achieves optimal performance,
thanks to the N-Way auto-negotiation function. The network switch can automatically choose the correct
speed. Cross-over detection ensures that users can connect the switch to another switch or hub without needing
to connect a crossover cable. Perfect for setting up or extending your network.
•
•
•
Automatic cross-over detection
Power supply included
Power LED
Technical specifications
Standards
Power
Type no.
EM4405
EM4408
: IEEE 802.3 10 Base T, IEEE 802.3u, 100 Base TX
: 9V DC, 0.6 A
Supplier no.
EM4405
EM4408
Number of ports
5
8
EMINENT 10/100 MBPS DESKTOP SWITCH BUSINESS
Create a home network for sharing files and Internet!
•
•
•
•
•
Power supply included.
LED on each port for link and activity.
Easy installation.
5 Year warranty.
Accessible helpdesk.
Technical specifications
Type
Ports
Detection
Protocol
Transfer Rate
Type no.
EM1030
EM1034
: Nway Desktop Switch 10/100 Mbps
: 5/8x 10/100 Mbps
: Automatic cross-over
: CSMA/CD Auto-MDIX
: 100/200 Mbps, 802.3 10Base-T, 802.3u 100Base-TX
Supplier no.
EM1030
EM1034
Number of ports
5
8
EMINENT 19" NETWORK SWITCH 10/100 MBPS BUSINESS
NETWORK - EMINENT
Create a home network for sharing files and Internet!
•
•
•
•
•
Status LED for every port with status of connection and activity.
Power supply included.
Easy installation.
5 Year warranty.
Accessible helpdesk.
Technical specifications
Type
Ports
Detection
Type no.
EM4416
EM4418
234
: Network switch
: 16/24x 10/100 Mbps ports
: Automatic cross-over
Supplier no.
EM4416
EM4418
Number of ports
16
24
GIGABIT SWTICHES
GIGABIT NETWERK SWITCH
Due to the constantly increasing demand for bandwidth thanks to audio and video applications, internet websites full off interactive content and internal applications, the demand for high-speed networking solution rises
as well. Eminent offers an attractive way to prepare your computer for the future in networking.
•
•
•
•
5x 100/1000Mbps ports
Automatic cross-over detection
Power supply included
LED on each port for link, activity and speed
Technical specifications
Data transfer rate
Power
: 10/100/1000
: 9V DC, 0.6A
Type no.
EM4441
EM4442
Number of ports
5x 10/100/1000 mbps ports
8x 10/100/1000 mbps ports
Supplier no.
EM4441
EM4442
NETWORK MEDIA CONVERTERS
TWISTED PAIR / FIBER MEDIA CONVERTER
Converts Ethernet over copper to Ethernet over fiber.
Technical specifications
TX port
FX port
FX cables
IEEE Standard
Dimension
Power supply
Type no.
EM4001
EM4000
: 10Base-T, 100Base-TX, RJ-45 shielded
: 100Base-FX, far end fault function
: MMF -62.5/125 um, 50/125 um (max. 2 km)
: 802.3, 802.3u
: 108x72.5x23 mm
: +5 V~+12V DC (supplied 7.5 V DC 1 A)
Supplier no.
EM4001
EM4000
Output connector
Multimode duplex ST 62.5/125 um, 50/125 um
Multimode duplex SC 62.5/125 um, 50/125 um
ROUTERS
EMINENT WIRELESS 300N ROUTER
With the Eminent EM4544 Wireless 300N Router you can share your Internet connection at high speed (up
to 300 Mbps). This powerful wireless N router with 2 antennas will increase your wireless range significantly.
Connect multiple users, wireless or wired. Enjoy the speed of a wireless network and share your Internet connection easily. Thanks to the blazing speed, the wireless router is perfect for playing online games and distributing
videos, music and photos.
High performance wireless connection up to 300Mbps
Advanced wireless security: firewall, WEP, WPA, WPA2
Two antennas for optimal reach and higher data transfer
Perfectly for online gaming and transferring music, videos and photos
NETWORK - EMINENT
•
•
•
•
Technical specifications
Speed
Security
Antenna
Ports
Type no.
EM4544
: 300 l/s
: Firewall, WEP, WPA, WPA2
: 2x non detachable 4db antennas
: 4x LAN 100 Mbps, 1x WAN 100 Mbps
Supplier no.
EM4544
Type
Wireless 300N Router
235
ROUTERS
EMINENT WIRELESS GIGABIT ROUTER 300N
With the Eminent EM4571 Gigabit 300N Router you can share your Internet connection at the highest possible
speed. This powerful wireless N router will increase your wireless range significantly. Connect multiple users,
wireless or wired. Thanks to the ultra-fast WAN port, this router is ideal for high-speed cable or fiber Internet,
allowing rates of up to 150 Mbps.
•
•
•
•
For a high-speed wired and wireless network
Advanced wireless security: firewall, WEP, WPA, WPA2
Three antennas for optimal reach and higher data transfer
Perfectly for online gaming and transferring music, videos and photos
Technical specifications
Ports
Security
Antennas
Type no.
EM4571
: 4x LAN 1000 Mpbs, 1x WAN 150 Mbps
: WEP, WPA, WPA2, wireless
: 3x non-detachable 4dBi antennas
Supplier no.
EM4571
Type
Wireless 300N Gigabit Router
EMINENT CONCURRENT DUAL BAND 600N GIGABIT ROUTER
The Eminent EM4585 Concurrent Dual Band Gigabit Router with four antennas shares your Internet connection
at the highest speed. Use the 2.4Ghz and 5Ghz band simultaneously to maximize the throughput and avoid
interferences. The high performance WiFi network is perfect for online gaming and transferring music, videos
and photos. Thanks to the Gigabit WAN port, this router is ideal for high-speed cable and fiber Internet. Create
a guest network and share your Internet connection with your family and friends.
•
•
•
•
•
Wireless Dual Band Router 300Mbps+300Mbps, Gigabit LAN and access point
Double bandwidth to avoid interferences and maximizing the wireless coverage
Four 4dBi antennas for higher data transfer
Separated antenna system: use the 2.4Ghz and 5Ghz band simultaneously
Gigabit WAN port: Perfect for fast cable or fiber-based Internet
Technical specifications
System
Ports
: Dual band system, simultaneous on 2.4GHz and 5GHz
: 4 LAN Gigabit ports, 1 WAN Gigabit port
: WEP, WPA and WPA2 wireless security,
Firewall with Intrusion Detection and Stateful Packet Inspection
: 4 x non-detachable 4dBi antennas
Security
Antennas
Type no.
EM4585
Supplier no.
EM4585
Type
Dual Band Gigabit Router
EMINENT WIFI REPEATER PRO
NETWORK - EMINENT
The Eminent EM4591 Universal WiFi-repeater increases your wireless network coverage. The Repeater has a
WPS button which makes the setup very easy, without complicated settings in the router or repeater. By the
built-in power connector you can plug the WiFi-repeater directly into the power outlet. This is the easiest way
to increase wireless network coverage in your home or office. The built-in power plug allows placement of the
EM4591 directly into the power socket. The WiFi signal indicator of the EM4591 indicates the best place to
locate the repeater.
•
•
•
•
The Wi-Fi signal indicator indicates the best place to locate the repeater
Easy setup with WPS function
Works with any wireless router
Wireless repeater and Access-point
Technical specifications
Standard
Security
Type no.
EM4591
236
: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
: 64/128/152-bit WEP, complies with 128 bit WPA (TKIP/AES)
Supplier no.
EM4591
Type
Universal Wifi-repeater with WPS
ROUTERS
EMINENT WIFI TRAVEL ROUTER
Create a WiFi hotspot and share your Internet connection at your hotel room. With the EM4630 WiFi Travel
Router you can create a WiFi hotspot by yourself and share this connection with other wireless devices. At the
same time it performs the role of a WiFi repeater and has a 2.1A USB-port for charging your smartphone or
tablet. The WiFi Travel Router is powered via the power socket. The EM4630 also functions as a travel adapter.
You will always have the right plug along with you.
•
•
•
•
•
Create a WiFi Hotspot and share your internet connection with multiple tablets and smartphones
With USB-port for charging your tablet and smartphone
Wireless router, repeater and access-point
Wireless connection up to 150Mbps
Suitable for Europe, USA/China, Australia/New Zealand and United Kingdom
Technical specifications
Standard
Type no.
EM4630
: IEEE 802.11n
Supplier no.
EM4630
Type
Wifi Travel router
USB NETWORK ADAPTERS
WIRELESS USB ADAPTER 150N
Do you wish to connect your desktop computer or notebook to your own wireless home network, your company network or another wireless network? The Eminent EM4575 Wireless 150N USB Adapter allows you to
access a wireless network. Thanks to the high speed of 11N networks, copying large files and streaming video is
now an easy job.
Technical specifications
Standard
Wireless security
Interface
: 150 l/s
: WEP, WPA and WPA2
: USB 2.0
Type no.
EM4575
Type
Wireless USB Adapter
Supplier no.
EM4575
EMINENT WIRELESS USB ADAPTER 300N
Would you like to connect your computer or notebook with your own wireless home network, your company
network or another network? The Eminent EM4579 wireless 300N USB adapter creates access to a wireless network. Thanks to the high speed of the 11N network, copying of large files and videostreaming is done quickly.
Wireless network adapter for desktop computers and notebooks
Perfect for Internet access and video/audio streaming at a blazing speed
Including WiFi Protected Setup button to set wireless security: WEP, WPA and WPA2
Enjoy the speed of a wireless N network
NETWORK - EMINENT
•
•
•
•
Technical specifications
Interface
Standard
Wireless security
: USB 2.0
: Wireless 300 Mbps
: WEP, WPA and WPA2
Type no.
EM4579
Type
Wireless USB Adapter
Supplier no.
EM4579
237
USB NETWORK ADAPTERS
EMINENT 300MBPS WIRELESS USB ADAPTER WITH ANTENNA
Do you wish to connect your desktop computer or notebook to your own wireless home network, your company network or your friends wireless computer? The EM4577 Wireless USB Adapter allows you to access a
wireless network. Thanks to the high speed of 300 Mbps, copying big files and video files is from now on an
easy job. The external antenna ensures optimal performance on any location!
•
•
•
•
•
Wireless network adapter for desktop computers and notebooks
External 2dBi antenna for extended range
Internet access and video/audio streaming at a blazing speed (up to 300 Mbps)
Advanced wireless security: WEP, WPA and WPA2
Especially suited for connection with Eminent 300N Wireless Routers
Technical specifications
Interface
Antenna
Standard
Complies with
: USB 2.0
: Dual 4dBi external antenna's
: Wireless 300Mbps (Draft-N), backwards compatible with 54Mbps and 11Mbps
: IEEE 802.11n and IEEE 802.11 g/b/a
Type no.
EM4577
Type
Wireless USB Adapter
Supplier no.
EM4577
EMINENT DUAL BAND WIRELESS USB ADAPTER
Do you wish to connect your desktop computer or notebook to your own wireless home network, your company network or your friends wireless computer? The EM4586 Dual band wireless USB Adapter allows you to
access a wireless network. Thanks to the high speed of 300 Mbps, copying big files and video files is from now
on an easy job. The dual external 4dBi antennas ensure optimal performance on any location.
•
•
•
•
•
Wireless network adapter for desktop computers and notebooks
Dual band; connect to both 2.4GHz and 5GHz networks
Dual 4dBi external antennas for extended range
Internet access and video/audio streaming at a blazing speed (up to 300 Mbps)
Advanced wireless security: WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
Technical specifications
Interface
Antenna
Standard
Complies with
: USB 2.0
: Dual 4dBi external antenna's
: Dual band 2.4GHz / 5GHz Wireless 300Mbps
: IEEE 802.11n and IEEE 802.11 g/b/a
Type no.
EM4586
Type
Dual band Wireless USB Adapter
Supplier no.
EM4586
EMINENT 10/100 MBPS USB NETWORKADAPTER
NETWORK - EMINENT
Easily provide your PC with a 10/100 Mbps network connection!
•
•
•
•
Connect your pc or notebook to an existing network
1-Port RJ45 networking adapter
Compliant with 10/100Mbps networks
Compliant with USB 2.0 specifications
Technical specifications
Interface
External connectors
: USB 2.0
: 1x RJ-45
Type no.
EM1010
Speed
10/100Mb/s
238
Supplier no.
EM1010
USB NETWORK ADAPTERS
EMINENT USB 3.0 GIGABIT NETWORKING ADAPTER
Is the network port from your desktop, laptop or netbook broken? You don't have a network port on your
computer? The Eminent EM1017 USB 3.0 Gigabit Networking Adapter is the solution to get back online again.
Even upgrade your existing 10/100 Mbps network to a Gigabit network via the USB 3.0 port. Install it easily on
all common operating systems
•
•
•
•
Upgrade your PC or Laptop to 1 Gigabit network connection by using your USB 3.0 port
Connect your pc or notebook to an existing network
1-Port RJ45 networking adapter
Compliant with 10/100/1000Mbps networks
Technical specifications
Interface
External connectors
: USB 3.0
: 1x RJ-45
Type no.
EM1017
Speed
10/100/1000
Supplier no.
EM1017
PCI NETWORK ADAPTERS
GIGABIT PCI NETWORK INTERFACE CARD
10/100/1000 Mbps PCI network adapter, the most easy way to provide your PC with a Gigabit Ethernet connection!
•
•
•
Future-ready the easy way
Data transfer speeds up to 1000Mbps
Extremely reliable and stable
Technical specifications
Interface
External connectors
Bracket format
: PCI
: 1x RJ-45
: Normal
Type no.
EM4028
Speed
10 / 100 / 1000 mbps
Supplier no.
EM4028
WIFI TRAVEL READERS
EMINENT WIFI TRAVEL READER FOR APPLE DEVICES
•
•
•
•
NETWORK - EMINENT
Watch at home or on the go videos and photos wireless at your iPad, iPod or iPhone via the EM4610 WiFi
Travel Reader. You simply have to connect your USB-stick or SD-card to the WiFi Travel Reader. This compact
WiFi Travel Reader also functions as a WiFi hotspot and WiFi repeater. You can use the EM4610 everywhere by
means of the internal battery.
Share your files wireless from your SD-card or USB-stick
Create a WiFi hotspot by yourself and share your Internet connection
Free iOS app for iPad, iPod and iPhone
Portable through the build-in rechargeable battery
Technical specifications
Standard
Type no.
EM4610
: IEEE 802.11 b/g/n
Supplier no.
EM4610
Type
Wifi Travel reader Apple devices
239
WIFI TRAVEL READER
EMINENT WIFI TRAVEL READER PRO
Watch at home or on the go videos and photos wirelessly at your tablet or smartphone via the Android/Apple
app. Simply connect your USB-stick or SD-card to the EM4620 WiFi Travel Reader Pro. This compact WiFi Travel
Reader Pro also functions as a WiFi hotspot and WiFi repeater. Use the EM4620 everywhere because of its internal battery. This battery operates as a power bank too, to charge your smartphone
•
•
•
•
•
Share your files wirelessly from your SD card or USB stick with other Android/Apple devices
Portable by the built-in rechargeable battery
Internal Power Bank: charge the battery of your smartphone/tablet or mp3 player
Wireless router, repeater and access point
Free Android and Apple app
Technical specifications
Standard
Type no.
EM4620
: IEEE 802.11b/g/n
Supplier no.
EM4620
Type
Wifi Travel reader Apple devices
NETWORK OVER MAINS
MINI POWERLINE ADAPTER 500MBPS STARTER KIT
The Eminent EM8031 Mini Powerline Adapter 500Mbps Starter Kit is the ideal extension of your home network.
The easiest to connect your laptop, computer, smart tv, media player and game console to your existing internet
router. Suited for HD streaming.
•
•
•
•
Two 500Mbps Mini Powerline Adapters.
Internet in every room, simply through the wall outlet.
Stable connection, no hassle with wires.
Security through 128-Bit AES Link encryption.
EM8031
Technical specifications
Data transfer
Standardization
: 500 Mbps
: IEEE802.3 and IEEE802.3u Ethernet
Type no.
EM8031
EM8030
Type
Set of 2 adapters
Single adapter
POWERLINE ADAPTER 500MBPS WITH POWER SOCKET (STARTER KIT)
NETWORK - EMINENT
The EM8033 is a Starter Kit consisting of two EM8032 Powerline Adapters.
The Eminent EM8032 Powerline Adapter 500Mbps with power socket is the ideal extension of your home
network. The easiest way to connect your laptop, computer, smart tv, media player and game console to your
existing internet router. Suited for HD streaming.
•
•
•
•
•
Powerline Adapter with power socket (500Mbps)
Ethernet over existing power lines
Internet in every room, simply through the wall outlet
Stable connection, no hassle with wires
Security through 128-Bit AES Link encryption
Technical specifications
Data transfer
Standardization
: 500 Mbps
: IEEE802.3 and IEEE802.3u Ethernet
Type no.
EM8033
EM8032
Type
Set of 2 adapters
Single adapter
240
EM8033
NETWORK OVER MAINS
POWERLINE ADAPTER 500MBPS MET STOPCONTACT STARTER KIT (BELGIUM)
The EM8035 is a Starter Kit consisting of two EM8034 Powerline Adapters.
The Eminent EM8034 Powerline Adapter 500Mbps with power socket is the ideal extension of a home network.
The easiest way to connect a laptop, computer, smart tv, media player or game console to an existing internet
router. Suited for HD streaming.
•
•
•
•
•
Powerline Adapter with power socket (500Mbps) Kit of two
Internet in every room, simply through the wall outlet
Internet in every room, simply through the wall outlet
Stable connection, no hassle with wires
Security through 128-Bit AES Link encryption
EM8035
Technical specifications
Data transfer
Standardization
: 500 Mbps
: IEEE802.3 and IEEE802.3u Ethernet
Type no.
EM8035
EM8034
Type
Set of 2 adapters
Single adapter
Supplier no.
EM8035
EM8034
WIFI POWERLINE ADAPTER
The Eminent EM8036 Powerline Adapter 500Mbps with integrated 300Mbps WiFi is the ideal extension of a
home network. The easiest way to connect a laptop, computer, smart tv, media player and game console to an
existing internet router. Suited for HD streaming.
•
•
•
•
•
500Mbps Powerline Adapter with 300Mbps WiFi
Internet in every room, simply through the wall outlet
Including 300Mbps WiFi hotspot
Suited for HD streaming
Compatible with 200Mbps Powerline AV adapters
Technical specifications
Data transfer
Data transfer WiFi
Standardization
: 500 Mbps
: 300 Mbps
: IEEE802.3 and IEEE802.3u Ethernet
Type no.
EM8036
EM8037
Type
Single WiFi adapter
WiFi adapter and single adapter (EM8036 + EM8030)
3 PORT POWERLINE NETWORKING SWITCH 500MBPS WITH POWER SOCKET
The Eminent EM8038 Powerline Adapter 500Mbps with power socket is the ideal extension of a home network.
The easiest way to connect your laptop, computer, smart tv, media player and game console to your existing
internet router. Suited for HD streaming.
3 Port Powerline Networking Switch
500Mbps Powerline Adapter with integrated power socket
Internet in every room, simply through the wall outlet
Suited for HD streaming
Integrated power socket and noise filtering for maximum data speed
NETWORK - EMINENT
•
•
•
•
•
Technical specifications
Data transfer speed
Standardization
Number of ports
: 500 Mbps
: IEEE802.3 and IEEE802.3u Ethernet
: 3 x 10/100 Mbps
Type no.
EM8038
Type
Single adapter
Supplier no.
EM8038
241
PRINT SERVER AND NAS
EMINENT PRINT SERVER AND NETWORK USB HUB
Do you wish to share USB devices with multiple computers in your (wireless) network? The Eminent EM4085
Network USB Hub is the solution for you. The network enabled USB hub creates access to up to four connected
USB devices.
•
•
•
•
Simultaneously share up to four USB devices over your network
From now on you need only 1 printer per household
No need for a powered-on computer to share USB devices
Plug & play, easy few-seconds installation
Technical specifications
Interface
Power
Type no.
EM4085
: USB 2.0
: DC 5V 2A
Supplier no.
EM4085
Ports
4
EMINENT MYISHARING NAS
Saving and sharing documents and media files never was so easy. The EM4172 myiSharing Gigabit NAS is THE
central point in your home and work environment. Your pictures, videos and music are accessible all over the
world with the free Android and IOS app
•
•
•
•
•
2 bay Gigabit NAS with myiSharing Cloud function
Central storage for all your documents and media files at home or at the office
Worldwide easy access with myiSharing Cloud
Free Android and IOS app
Share your media via UPnP
Technical specifications
CPU
Memory
Internal hard drive(s
Capacity hard drive(s)
: Dual-core 750MHz
: 128MB DDR2 SDRAM, 256MB NAND flash
: One or two 3.5" SATA-I, SATA-II or SATA-III hard drives
: 80GB - 3TB per HDD
Type no.
EM4172
Type
NAS 2 bay
Supplier no.
EM4172
NETWORK EXTENSION
IP CAMERA EXTENDER
This device is an easy and cheap solution for transmitting an IP camera signal via Coax cable over a distance of
maximum 200 metres.
Technical specifications
Connectors
Max. distance
Cable type
Power
Type no.
SC1050
: 1x BNC (female), 1x UTP RJ-45 (female)
: 200 m
: Coax (RG59)
: Bus powered
Supplier no.
SC1050
Type
IP Extender Coax
IP TCP/IP EXTENDER
NETWORK - EMINENT
This IP extender enables the transmission of TCP/IP devices over 1.2 km or 1.8 km by using a regular CAT5
cable resp. coax cable. Ideal for situations in which IP video must be send to installations that are beyond the
100 meters distance limit of Ethernet.
•
•
Long range transmission up to 1.8 km.
Plug & Play.
Technical specifications
Connections
Power
Ethernet speed
: RJ-45 UTP (female)
: 5V DC, 2A (external, delivered)
: 10/100 Mbps
Type no.
SC1052
SC1054
Type
IP Extender Coax
IP Extender CAT5
242
Supplier no.
SC1052
SC1054
JACARTA IT-ROOM CONTROL
Did you experience a failure of air conditioning in your data center over the past
12 months, like 45 % of surveyed IT managers? With an increase in the size of
data centers, the risk of overheating equipment has grown extensively. Jacarta
combats this risk with its unique monitoring and warning system , the interSeptor
Pro series.
“An undetected failure can have catastrophic consequences for a data center. With our interSeptor
Pro series we have developed a system that monitors the environmental factors of a data center 24/,
even at night and on weekends, and sends an instant notification of abnormal values, “ says Colin
Mocock , Marketing Director at Jacarta.
Create maximum safety and insight into your data center with
Jacarta!
Jacarta builds reliable, more cost efficient and easy to install remote monitoring systems for data centers, IT racks and computer rooms. These systems are indispensable in a modern network environment because they offer an energy-saving protection against failure and damage in your network.
European development and
production
Jacarta is a British manufacturer with a high
quality and reliability standard. The quality of
Jacarta is excellent, resulting in reliable and good
products.
24/7 insight into the status of
your data center environment
The monitoring systems of Jacarta provide 24/7
insight into the environmental status and immediately generate an alarm in case there are
abnormal developments in:
Temperature
Humidity
Voltages
Emergencies (smoke, water leakage)
With the combination of software solutions and alarm systems Jacarta offers insight into trends in
temperature, humidity, voltage, water leaks, smoke, ventilation, air conditioning and security issues
in server rooms (eg unclosed doors) within your computer network.
Air conditioning
Ventilation
Security
Jacarta’s interSeptor and
interSeptor Pro
The two focal lines of Jacarta are the
interSeptor and interSeptor Pro series.
The interSeptor is a scalable monitoring
system that alerts in case of abnormal
values in the environment of a data
center. Part of this series is the interSeptor iMeter , this meter; this meter
monitors the power supply to the racks,
as well as the environmental factors of
these racks.
The interSeptor Pro is more advanced;
in addition to generating alarms, it also
provides data analysis to determine and
early warn for impending developments
in environmental factors.
INTERSEPTOR WITH TEMPERATURE/HUMIDITY SENSOR
•
•
•
IT-ROOM CONTROL - JACARTA
interSeptor is a full-featured, scaleable network environmental monitoring device designed to remotely monitor
temperature, humidity and other environmental conditions in data centres, IT rooms and racks. Email and
SNMP alerts are available as standard, but combined with our unique Alert Centre facility interSeptor can also
provide automated telephone voice and text alerts 24/7 to give early-warning of impending computer room
problems. Designed for ‘out-of-the-box’ operation, interSeptor is supplied with a dual temperature/humidity
sensor, with additional temperature/humidity sensors available also. A range of optional ‘Go-Probe’ sensors to
detect security breaches, power failures, smoke and water leaks can also be quickly added to the interSeptor
system to provide comprehensive monitoring of your critical environments.
Monitoring via Web & SNMP
On-board Logging/Graphing
Alerts via Email, SNMP Traps as standard, Voice and SMS Text via Alert Centre
Type no.
JK1000
JK1001
JK1002
JK1003
Supplier no.
IS01EU
IS02EU
ISPLUS02EU
ISRACK
Sensors
1x Temperature/Humidity.
2x Temperature/Humidity.
2x Temperature/Humidity + 1x Security ~1x Water.
19 inch rack 1HE.
243
JACARTA IT-ROOM CONTROL
INTERSEPTOR PRO 8-PORT (INC. TEMP/HUMIDITY SENSORS)
interSeptor Pro is an advanced ethernet Data Centre and Rack Monitoring System that monitors room and rack
environmental conditions and provides early warning alerts in the event of air-conditioning failure and other
conditions that may threaten business continuity. In addition, interSeptor Pro can also be used to extensively
record temperature/humidity data for graphing and analysis helping you not only to ensure your IT equipment is
running under optimal conditions but also to quickly identify where air-conditioning systems could be run more
efficiently to maximise energy savings
The unique design of the interSeptor Pro means that 2 additional Go-Probe alarm sensors (water leak, security,
smoke, power, etc.) can be connected to each temperature/humidity probe. This means the 24-port device,
for instance, has the capacity to support an incredible 48 additional alarm sensors, giving complete long-term
flexibility in terms of sensor deployment.
•
•
•
•
Temperature/Humidity Sensor supplied for every port as standard
Up to 48 Go-Probe Sensors (water, smoke, security, power) can be quickly connected
Alerts via Email, SNMP and SMS Text (using GSM modem)
Relay outputs for crisis management
Type no.
JK1004
JK1005
JK1006
JK1007
JK1008
Supplier no.
ISPROUK02
ISPROUK04
ISPROUK08
ISPROUK16
ISPROUK24
Sensors
8- ports delivered with 2x Temperature/Humidity sensors.
8- ports delivered with 4x Temperature/Humidity sensors.
8- ports delivered with 8x Temperature/Humidity sensors.
16-ports delivered with 16x Temperature/Humidity sensors.
24-ports delivered with 24x Temperature/Humidity sensors.
IT-ROOM CONTROL - JACARTA
Alerts by e-mail, SNMP, Voice and
SMS Text (by GSM modem).
Jacarta iMeter
iMeter ® is a flexible, scalable solution that enables IT departments to
understand the environmental factors in
the server room and the racks. iMeter
consists of three main components: the
iMeter Master, the iMeter Slave and
a wide range of sensors. Each 8-port
iMeter Master can be expanded with up
to 72 8-port iMeter Slaves.
244
Slaves can be daisy-chained.
Monitors voltage and current without
network downtime.
Water, temperature, humidity, smoke,
security and dry contact-sensors are
available.
8 Sensor ports per iMeter Master and
Slave (monitors 584 sensors of one
IP-adres).
iMS Software to manage, analyse and
report temperature, humidity and power
data.
JACARTA IT-ROOM CONTROL
iMeter installation requirements
Select the to be connected sensors.
Determine how many iMeter Slaves are
required.
Connec the iMeter Master and Sales
by using a CAT5 cable.
Install the sensors on the ports as suggested;
the sensors will be recognized automaticly
after installation.
Configure the desired settings via the
browser interface
iMS software
Data collection of power supply and environmental factors via MySQL.
Power
Voltage
Temperature
Humidity
Reports in PDF, Excel and HTML formats.
Power analysis and indication of power costs up
to racklevel.
CO2-emissions and KWh data can bve reported, analyzed and visualized.
Cost savings and efficiency improvements can
be identified with reported data.
IMETER MASTER
iMeter® is a flexible, scalable and ultimately extremely powerful solution that enables IT
departments to monitor the power flowing into racks and the environmental conditions in
and around those racks. iMeter® is made up of 3 principal components, the iMeter Master,
the iMeter Slave and our range of power and environmental Sensors. Each 8-port iMeter
Master can support up to 72 8-port iMeter Slaves
Alerts via Email, SNMP, Voice and SMS Text (via GSM Modem)
Monitor current and voltage with zero network downtime
8 Sensor ports per iMeter Master and Slave (monitor 584 sensors from one IP address)
Slaves can be daisy-chained
Water, Temperature, Humidity, Smoke, Security and Dry Contact Sensors available
iMS Software to Manage, Analyse and Report Temperature, Humidity and Power Data
Type no.
JK2000
Supplier no.
iMM08
IT-ROOM CONTROL - JACARTA
•
•
•
•
•
•
Type
Master
IMETER SLAVE
iMeter® is a flexible, scalable and ultimately extremely powerful solution that enables IT
departments to monitor the power flowing into racks and the environmental conditions in
and around those racks. iMeter® is made up of 3 principal components, the iMeter Master,
the iMeter Slave and our range of power and environmental Sensors. Each 8-port iMeter
Master can support up to 72 8-port iMeter Slaves
Type no.
JK2001
Supplier no.
iMS08
Type
Slave
245
JACARTA IT-ROOM CONTROL
The temperature and humidity sensor with a
high / low warning and critical conditions of
temperature and humidity values, can be configured in the interSeptor to make sure that an
alarm goes off in case of abnormal conditions.
The hysteresis configuration ensures the alarms
are not triggered when the levels “hover”
around the configured tresholds.
This ionization smoke detection system is supplied with a 12V power supply . The unique
connectivity design of the sensor interSeptor
simplifies the installation and monitoring of the
smoke alarm, especially on ceilings. The cable
connection only needs to be sone from the temperature / humidity sensors, which are usually
already installed.
The water leak sensor is supplied with a 3 or
18 meters long leak sensor cable. The cable can
be installed in the air-conditioning installation,
in ceiling voids, under floors and within pipes.
You will create a simple, comprehensive leak
detection this way.
The voltage sensor can be used to check for
outages and interruptions. As soon as the
voltage output is disconnected, the sensor will
sound an alarm.
The security sensor option is a magnetic reed
contact sensor, ideal for monitoring a rack or
door.
The motion sensor uses Passive Infra - Red (PIR)
technology to detect motion. Upon detection
sounds an alarm.
TEMPERATURE/HUMIDITY SENSOR
Type no.
JK1009
JK1010
Supplier no.
ISTH
ISTH18
Length
2.00 m
18.00 m
PIR SENSOR
Type no.
JK1015
JK1016
Supplier no.
ISPIR4INT
ISPIR18INT
IT-ROOM CONTROL - JACARTA
Supplier no.
ISSD4INT
ISSDINT
SPSD4
SPSD18
WATER DETECTOR WITH LEAK SENSOR CABLE
Type no.
JK1011
JK1012
JK2010
JK2011
Length
4.00 m
18.00 m
Type no.
JK1017
JK1018
Length
3.00 m Interseptor & Pro
18.00 m Interseptor & Pro
3.00 m iMeter
18.00 m iMeter
Supplier no.
ISVS4EU
ISVS18EU
Length
4.00 m
18.00 m
SECURITY SENSOR
Length
4.00 m, interSeptor & interSeptor Pro
18.00 m, interSeptor & interSeptor Pro
4.00 m, iMeter
18.00 m, iMeter
Type no.
JK1013
JK1014
JK2012
JK2013
For more information and prices please visit our website or contact our sales team.
246
Supplier no.
IS3WD4US
IS18WD4US
SP3WD4US
SP18WD4US
VOLTAGE SENSOR
SMOKE DETECTOR
Type no.
JK1019
JK1020
JK2018
JK2019
The intelliVolt voltage sensor is simply connected on one of the iMeter sensor ports and
outlet. The voltage is monitored between 0 and
265V.
Supplier no.
ISSS4
ISSS18
SPSS4
SPSS18
Length
4.00 m, interSeptor & interSeptor Pro
18.00 m, interSeptor & interSeptor Pro
4.00 m, iMeter
18.00 m, iMeter
JACARTA IT-ROOM CONTROL
iMETER INTELLIVOLT (230V/50HZ)
Supplier no.
iVOLT01
Type
iMeter intelliVolt
iMETER INTELLIAMP
Type no.
JK2002
Supplier no.
iAMP01
Supplier no.
SPTS1
SPTS4
SPTS18
SPTH1
SPTH4
SPTH18
Type
intelliAmp 16 A / 32 A
Length
0.30 m Temperature sensor
4.00 m Temperature sensor
18.00 m Temperature sensor
0.30 m Temp/humidity sensor
4.00 m Temp/humidity sensor
18.00 m Temp/humidity sensor
Supplier no.
ISPGSM
iMGSMEU
Length
4.00 m
18.00 m
Type no.
JK2014
JK2015
Supplier no.
SPAS4
SPAS18
Length
4.00 m
18.00 m
ALARM BEACON
Type no.
JK1031
JK1032
JK2022
JK2023
Supplier no.
ISPBCN4INT
ISPBCN18INT
SPBCN4
SPBCN18
Length
4.00 m, interSeptor & interSeptor Pro
18.00 m, interSeptor & interSeptor Pro
4.00 m, iMeter
18.00 m, iMeter
CABLE PACK
GSM MODEM
Type no.
JK1033
JK2024
Supplier no.
SPVS4EU
SPVS18EU
iMETER AIRFLOWSENSOR
iMETER TEMPERATURE SENSOR &
TEMP/HUMIDITY SENSOR
Type no.
JK2004
JK2005
JK2006
JK2007
JK2008
JK2009
Type no.
JK2016
JK2017
Type
interSeptor Pro GSM modem
iMeter GSM modem
Type no.
JK1036
JK1037
JK1038
Supplier no.
ISPCBL08
ISPCBL16
ISPCBL24
Content
2x 4 m, 2x 6 m, 2x 8 m, 2x 10m
JK1036 + 2x 12 m, 2x 14 m, 2x 16 m, 2x 18 m
JK1037 + 2x 20 m, 2x 22 m, 2x 24 m, 2x 26 m
247
IT-ROOM CONTROL - JACARTA
Type no.
JK2003
iMETER VOLTAGESENSOR
PATCHPANELS
BLINDPANEEL PLASTIC HE
Type no.
PP1040
Supplier no.
PP1040
Type
1U
PATCHPANEL 24-PORTS UTP
•
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool
Universal labels color-coded for T568A and T568B wiring schemes
Technical specifications
Ports
Suitable for
Type no.
PP1001
PP1010
: 24x RJ-45
: 4 pairs, 22-26 AWG unshield cable
Supplier no.
PP1001
PP1010
Category
CAT5E
CAT6
PATCHPANEL 24-PORTS UTP 45°
•
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool
Universal labels color-coded for T568A and T568B wiring schemes
Technical specifications
Ports
Suitable for
Type no.
P24AK1
PP1013
: 24x RJ-45 45°
: 4 pairs, 22-26 AWG unshield cable
Supplier no.
P24AK1
PP1013
Category
CAT5E
CAT6
PATCHPANEL 24-PORTS UTP WITH CABLE MANAGEMENT BAR
•
•
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool.
Universal labels color-coded for T568A and T568B wiring schemes.
With cable management bar.
Technical specifications
Ports
Suitable for
PATCHPANELS
Type no.
PP1011
: 24x RJ-45
: 4 pairs, 22-26 AWG unshielded cable
Supplier no.
PP1011
Category
CAT6
Go to Molex on page 200 for more patchpanels
248
PATCHPANELS
PATCHPANEL 24-POORTS SHIELDED CAT6A WITH COVER
•
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool.
Universal labels color-coded for T568A and T568B wiring schemes.
Technical specifications
Ports
Suitable for
Type no.
PP1020
: 24x RJ-45
: 4 pairs, 22-26 AWG solid and stranded cable
Supplier no.
PP1020
Category
CAT6A
PATCHPANEL 24-POORTS SHIELDED WITH COVER
•
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool.
Universal labels color-coded for T568A and T568B wiring schemes.
Technical specifications
Ports
Suitable for
Type no.
PP1002
PP1012
: 24x RJ-45
: 4 pairs, 22-26 AWG solid and stranded cable
Supplier no.
PP1002
PP1012
Category
CAT5E
CAT6
24 PORT KEYSTONE-JACK PATCHPANEL WITHOUT CONNECTORS
•
•
•
•
•
Suitable for Unshielded and shielded keystone jacks
Suitable for keystone TD5xxx and TD6xxx range
With yellow/green AWG18 ground wire (0.40m)
With cable management bar.
Keystone Jacks will be placed 45 degrees left or right.
Technical specifications
Length
Height
Depth
Colour
Colour number
: 19 inch (482.6mm)
: ! HE
: 92.3 mm
: Black
: RAL9005
Type no.
PP1030
Number of sockets
24
Supplier no.
PP1030
24 PORT KEYSTONE JACK 45° PATCH PANEL WITHOUT CONNECTORS
Suitable for Unshielded and shielded keystone jacks
Suitable for keystone TD5xxx and TD6xxx range
With yellow/green AWG18 ground wire (0.40m)
With cable management bar.
Type no.
PP1033
Supplier no.
PP1033
PATCHPANELS
•
•
•
•
Number of sockets
24
249
PATCHPANELS
12-PORT FIBER OPTIC PATCHPANEL
These fiber optic patchpanels are available in various versions (aluminium,telescopic, or with one or more premounted adapters).
Technical specifications
Number of connections
Color
Material
Angle connections
: 12
: RAL 7035
: Steel
: 0°
Type no.
EA9500
EA9505
EA9510
EA9515
EA9520
EA9525
Ports
MM 12xST Simplex
SM 12xST Simplex
MM 12xSC/ST Duplex
SM 12xSC/ST Duplex
MM 12xSC Duplex
SM 12xSC Duplex
Supplier no.
EA9500
EA9505
EA9510
EA9515
EA9520
EA9525
COMPLETE PREASSEMBLED DISTRIBUTION BOX WITH PULL/OUT MTP®/MPO FANOUT
•
•
19 " 1U RAL 7071 drawer with telescopic pullout
Distribution plate for 8 x MTP®/MPO adpaters
Technical specifications
Colour
Dimensions (W) x (H) x (D)
: RAL 7021
: 483 x 44.5 x 280 mm
Type no.
EA9612
EA9614
EA9622
EA9624
EA9628
Connectors
2 x MTP® - 24 x SC
4 x MTP® - 48 x SC
2 x MTP® - 24 x LC
4 x MTP® - 48 x LC
8 x MTP® - 96 x LC
Supplier no.
EA9612
EA9614
EA9622
EA9624
EA9628
DISTRIBUTION BOX FOR ASSEMBLED MTP®-MPO CASSETTES
Type no.
EA9600
Supplier no.
EA9600
Type
3 x Mounting hole
DUMMY PLATE FOR DISTRIBUTION BOX
Type no.
EA9601
Supplier no.
EA9601
Type
Dummy plate RAL 7021
COMPLETE ASSEMBLED MPO FANOUT CASSETTES
PATCHPANELS
•
•
PO-male Fanout unit 900 μm coloured
Quick lock
Type no.
EA9602
EA9603
EA9604
250
Supplier no.
EA9602
EA9603
EA9604
Connectors
1 x MPO - 12 x SC
1 x MPO - 12 x LC
2 x MPO - 2 x 12 x LC
KEYSTONE JACKS
KEYSTONE JACK UNSHIELDED RJ-45 TOOL FREE
•
•
•
•
No punch down tool needed.
Universal labels color-coded for T568A and T568B wiring schemes.
Fitting 1U 24 port High Density keystone panel.
Cat 6 type is 3P verified.
Technical specifications
Connector
Contacts
Suitable for
Type no.
TD5010
TD5011
TD6010
TD6011
: RJ-45 Jack
: 50μ gold
: 4 pairs, 22-26 AWG solid and stranded cable
Supplier no.
TD5010
TD5011
TD6010
TD6011
Type
CAT5E Black
CAT5E White
CAT6 Black
CAT6 White
KEYSTONE JACK FULL SHIELDED RJ-45 TOOL FREE
•
•
•
•
No punch down tool needed.
Universal labels color-coded for T568A and T568B wiring schemes.
Fitting 1U 24 port High Density keystone panel.
CAT6 type is Delta verified.
Technical specifications
Connector
Contacts
Suitable for
Type no.
TD5020
TD6020
TD6510
: RJ-45 Jack
: 50μ gold
: 4 pairs, 22-26 AWG solid and stranded cable
Supplier no.
TD5020
TD6020
TD6510
Type
CAT5E Tool free
CAT6 Tool free
CAT6A Tool free
KEYSTONE JACK UNSHIELDED RJ-45 PUNCH DOWN
•
•
•
•
IDC compatible with 110 & Krone tool.
Universal labels color-coded for T568A and T568B wiring schemes.
Fitting 1U 24 port High Density keystone panel.
CAT6 type is 3P verified.
Technical specifications
Type no.
TD5012
TD5013
TD6012
TD6013
: RJ-45 Jack
: 50μ gold
: 4 pairs, 22-26 AWG
Supplier no.
TD5012
TD5013
TD6012
TD6013
KEYSTONE JACKS
Connector
Contacts
Suitable for
Type
C5E Black
C5E White
C6 Black
CAT6 White
251
KEYSTONE JACKS
KEYSTONE JACK FULL SHIELDED RJ-45 PUNCH DOWN
•
•
•
•
IDC compatible with 110 & Krone tool.
Universal labels color-coded for T568A and T568B wiring schemes.
Fitting 1U 24 port High Density keystone panel.
CAT6 type is Delta verified.
Technical specifications
Connector
Contacts
Suitable for
Type no.
TD5021
TD6021
TD6511
: RJ-45 Jack
: 50μ gold
: 4 pairs, 22-26 AWG
Supplier no.
TD5021
TD6021
TD6511
Type
CAT5E
CAT6
CAT6A
KEYSTONE JACK UNSHIELDED RJ-45 PUNCH DOWN
•
•
•
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool.
Universal labels color-coded for T568A and T568B wiring schemes.
UL Listed.
CAT6 type is 3P verified channel performance.
Technical specifications
Connector
Contacts
Suitable for
Type no.
TD5014
TD5015
TD6014
TD6015
TD6016
TD6017
: RJ-45 Jack
: 50μ gold
: 4 pairs, 22-26 AWG
Supplier no.
TD5014
TD5015
TD6014
TD6015
TD6016
TD6017
Type
CAT5E Black
CAT5E White
CAT6 Black
CAT6 White
CAT6A Black
CAT6A White
KEYSTONE JACK FULL SHIELDED RJ-45 PUNCH DOWN
KEYSTONE JACKS
•
•
•
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool.
Universal labels color-coded for T568A and T568B wiring schemes.
UL Listed.
CAT6 type is 3P verified channel performance.
Technical specifications
Connector
Contacts
Suitable for
Type no.
TD5022
TD6022
TD6023
252
: RJ-45 Jack
: 50μ gold
: 4 pairs, 22-26 AWG
Supplier no.
TD5022
TD6022
TD6023
Type
CAT5E
CAT6
CAT6A
MODULAR COUPLERS
RJ FEMALE - RJ FEMALE, CROSSED
RJ-female - RJ-female
Crossed connection.
Type no.
TD1004
TD1008
Supplier no.
TD1004
TD1008
Connector
RJ-11
RJ-45
RJ FEMALE - RJ FEMALE, 1:1
RJ-female - RJ-female
Connection 1:1
Suited as coupler to extend cables.
Type no.
TD1014
TD1016
TD1018
Supplier no.
TD1014
TD1016
TD1018
Connector
RJ-11
RJ-12
RJ-45
INLINE COUPLER RJ-45 UNSHIELDED
Technical specifications
Connector A
Connector B
Wiring
Type no.
SD6008
: RJ-45 female
: RJ-45 female
: Straight
Supplier no.
SD6008
Type
CAT6
INLINE COUPLER RJ-45 SHIELDED
Technical specifications
Connector A
Connector B
Wiring
Type no.
SD6018
SD5018
SD6518
: RJ-45 female
: RJ-45 female
: Straight
Supplier no.
SD6018
SD5018
SD6518
Type
C6
C5E
C6A
MODULAR COUPLERS
KEYSTONE COUPLER RJ-45 UNSHIELDED
Technical specifications
Connector A
Connector B
Wiring
Type no.
SD5009
SD6009
: RJ-45 female
: RJ-45 female
: Straight
Supplier no.
SD5009
SD6009
Type
CAT5E
CAT6
253
MODULAR COUPLERS
KEYSTONE COUPLER RJ-45 SHIELDED
Technical specifications
Connector A
Connector B
Wiring
Type no.
SD5019
SD6019
SD6519
: RJ-45 female
: RJ-45 female
: Straight
Supplier no.
SD5019
SD6019
SD6519
Type
CAT5E
CAT6
CAT6A
JUNCTIONBOX UNSHIELDED
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool
Type no.
SD6021
SD5021
Supplier no.
SD6021
SD5021
Type
CAT6
CAT5E
JUNCTIONBOX SHIELDED
•
IDC compatible with 110 & Krone toolIDC compatible with 110 & Krone tool
Type no.
SD6020
SD5020
Supplier no.
SD6020
SD5020
Type
CAT 6
CAT5E
SPLITTERS
RJ MODULAR T-ADAPTERS, 3X FEMALE
Modular T-adapter
Technical specifications
Application
Type no.
TD1404
TD1408
TD1406
: 1:1
Supplier no.
TD1404
TD1408
TD1406
Connectors
3x RJ-11 female
3x RJ-45 female
3x RJ-12 female
RJ MODULAR T-ADAPTERS, 2X FEMALE + 1X MALE
MODULAR COUPLERS
Modular T-adapter
Technical specifications
Application
Type no.
TD1504
TD1506
TD1508
254
: 1:1
Supplier no.
TD1504
TD1506
TD1508
Connectors
2x RJ-11 female - 1x RJ-11 male
2x RJ-12 female - 1x RJ-12 male
2x RJ-45 female - 1x RJ-45 male
SPLITTERS
UTP SPLITTER - USOC -> TOKENRING / PHONE
Splits a 4 pair USOC connection in pair 1&2 to port 1 and pair 3&4 to port 2 for
Token Ring or phone/modem/fax on both ports.
Type no.
TS1010
Supplier no.
TS1010
Wiringdiagram
USOC Tokenring
UTP SPLITTER - T568B -> TOKENRING / PHONE
Splits a 4 pair T568B connection in pair 1&2 to port 1 and pair 3&4 to port 2
for Token Ring or phone/modem/fax on both ports.
Type no.
TS1015
Supplier no.
TS1015
Wiringdiagram
T568B Tokenring
UTP SPLITTER - T568B -> 356A / PHONE
Splits a 4 pair T568B connection in pair 1&2&3 to port 1 (356A) and pair 4 to
port 2 for data-connection and phone/modem/fax.
Type no.
TS1020
Supplier no.
TS1020
Wiringdiagram
T568B - 356A
UTP SPLITTER - T568A / T568B -> 10BASE-T
Type no.
TS1025
Supplier no.
TS1025
SPLITTERS
Splits a 4 pair T568A/T568B connection in pair 2&3 to port 1 and pair 1&4 to
port 2 for example 10Base-T applications (10 mbps).
Wiringdiagram
T568A - T568B
255
SPLITTERS
UTP SPLITTER - T568A -> TOKENRING
Splits a 4 pair T568A connection in pair 1&2 to port 1 and pair 3&4 to port 2
for example Token Ring applications.
Type no.
TS1030
Supplier no.
TS1030
Wiringdiagram
T568A Tokenring
UTP SPLITTER - T568A -> T568B 10BASE-T / TOKERING
T568B 10Base-T / TokenringSplits a 4 pair T568A/T568B connection in pair
2&3 to port 1 and pair 1&4 to port 2 for example 10Base-T in combination
with Token Ring applications.
Type no.
TS1035
Supplier no.
TS1035
Wiringdiagram
T568A/T568B 10 Base T Tokenring
UTP SPLITTER - 2X 8 WIRES
Duplicates 8 wires to both connections.
SPLITTERS
Type no.
TS1040
256
Supplier no.
TS1040
Wiringdiagram
2x 8 pins 1:1
CAI CONNECTION MATERIAL
CAI AND SURFACE-MOUNTED JUNCTION BOX WITH KABEL KEUR CERTIFICATION
The junction boxes come in a complete kit, including installation material and instructions. The junction boxes
are 'Kabel Keur' certified and can be used as a junction box for radio, TV and digital services. The TD4000 is
used as a transition point (AOP subscriber transfer point) between the CATV network of the cable operator and
the home network.
•
•
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Impedance
Cable diameter
: 75 Ohm
: 6 till 8.5 mm
Type no.
TD4000
TD4001
Type
One hole outlet
Junction box radio / TV
Supplier no.
TRAS-1000BKK
TRAS-2000KK
CAI DISTRIBUTORS EQUIPPED WITH F CONNECTORS WITH KABEL KEUR
With these splitters, signals can be divided into equally strong signals with minimal attenuation loss. The
available coax cable must be connected to the input, the output cables can be connected to the outputs with
F-connectors. The Kabel Keur certified splitters are suitable for radio, television and digital services.
•
•
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Impedance
Frequency
Connection
Type no.
TD4002
: 75 Ohm
: 5-1000 MHz
: F-connectoren
Supplier no.
ES-02NKK
Type
2-way splitter
CAI IEC SPLITTERS
•
•
CAI CONNECTION MATERIAL
With the TD4003, a connection to a junction box can be realized quite easily. The two outputs of the splitter
are broad-band, so the total frequency spectrum will be transmitted. This means that the splitter is also suitable
for the connection of cable modems and/or digital Set-top boxes. The Kabel Keur certified splitter is suitable for
radio, television and digital services.
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Impedance
Frequency
Connection
Type no.
TD4003
: 75 Ohm
: 5-1000 MHz
: IEC Connectors
Supplier no.
PTS-02KK
Type
2-way splitter
257
CAI CONNECTION MATERIAL
CAI HOUSE AMPLIFIER 4 FOLD 20 MTR
Signal loss can occur when multiple radio and TV connections exist in an indoor network. An amplifier can provide the solution to this problem. The amplifier amplifies the signal so that the signal loss is compensated. The
TD4006 comes in a complete kit, including installation material and instructions. The amplifier has four outputs
with different amplifications. This means that the outputs are suitable for different cable lengths from 0 to 20
metres. All outputs are support return. The Kabel Keur certified amplifier is suitable for radio, television and
digital services.
•
•
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Frequency
RTV amplification port 1
RTV amplification port 2
RTV amplification port 3
RTV amplification port 4
Returnpath gain
Connection
: 85-862 MHz
: 0 dB
: + 2 dB
: + 4.5 dB
: + 7.5 dB
: + 2.5 dB (5-65Mhz)
: F connectors
Type no.
TD4006
Type
4 lane amp to 20 mtr
Supplier no.
FRA-752NKK
CAI HOUSE AMPLIFIER 4 FOLD 15 MTR
Signal loss can occur when multiple radio and TV connections exist in an indoor network. An amplifier can provide the solution to this problem. The amplifier amplifies the signal so that the signal loss is compensated. The
TD4007 comes in a complete kit, including installation material and instructions. The amplifier has four outputs
with different amplifications. The outputs are suitable for cable lengths from 0 to 15 metres. All outputs are
support return. The Kabel Keur certified amplifier is suitable for radio, television and digital services.
•
•
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Frequency
RTV gain port 1
RTV gain port 2
RTV gain port 3
RTV gain port 4
Connection
: 85-862 MHz
: + 4 dB
: + 4 dB
: + 4 dB
: + 4 dB
: F connectors
Type no.
TD4007
Type
4 lane amp to 15 mtr
Supplier no.
FRA-722NKK
CAI CONNECTION MATERIAL
CAI HOUSE-LINE AMPLIFIER
In case of a weak incoming signal, a repeater is the solution. The amplifier amplifies the signal so that the signal
loss is compensated. The TD4008 comes in a complete kit, including installation material and instructions. The
amplifier provides an output for a cable length of 30 metres. The output supports return. The Kabel Keur certified amplifier is suitable for radio, television and digital services.
•
•
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Frequency
RTV gain port
Returnpath gain
Connection
: 85-862 MHz
: + 12.5 dB
: + 6.5 dB (5-65MHz)
: F connectors
Type no.
TD4008
Type
amplifier to 30 mtr
258
Supplier no.
FRA-748DKK
CAI CONNECTION MATERIAL
CAI PLUG RTV FILTER
The splitter can be placed in a coax signal transfer point to enable a radio and TV connection. The television is
connected to one output of the splitter and the radio to the second output. The RTV splitter supports return and
is Kabel Keur certified. It is suitable for radio, television and digital services.
•
•
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Connections
Type no.
TD4010
: IEC connectors
Supplier no.
TOF-02KK
Type
2 way splitter for radio and television
CATV F CONNECTOR SET "EASY FIT"
High quality metal coaxial connectors for use with 7mm Kabel Keur coaxial cable. The easy fit connectors require
no tools. If the coaxial cable is properly stripped, the Easy Fit plug can be easily slid on. The Kabel Keur Easy
Fit connectors are aligned for a proper fit. Interference is kept to a minimum due to the EMC properties and
attenuation is minimal too. The coaxial connectors support return and are Kabel Keur certified. They are suitable
for radio, television and digital services.
•
•
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Connection
Cable thickness
: F connectors
: 7 mm
Type no.
TD4005
Type
set of 4 pieces
Supplier no.
SPP-12KK
CAI IEC CONNECTORS KIT ANGLED MALE AND FEMALE PROFESSIONAL
•
•
CAI CONNECTION MATERIAL
High quality metal coaxial connectors for use with +/- 7 mm coaxial cable. Interference is kept to a minimum
due to the EMC properties and attenuation is minimal too. The coaxial connectors support return and are Kabel
Keur certified. They are suitable for radio, television and digital services.
Kabel Keur is prescribed by UPC and Ziggo.
With Kabel Keur, you immediately recognize the best connection material for your TV.
Technical specifications
Connection
Cable thickness
: IEC connectors
: 7 mm
Type no.
TD4004
Type
male en female
Supplier no.
COAX STEKKERS
259
ADSL CONNECTION MATERIAL
PSTN ADSL SPLITTER
ADSL Splitter for PSTN lines. The splitter has 3x RJ-11 female connections.
Technical specifications
Connector A
Connector B
Connection
Type no.
TD2002
: RJ-11 female
: 2x RJ-11 female
: Analog ADSL Splitter
Supplier no.
TD2002
Description
PSTN ADSL Splitter
ADSL2+ SPLITTER ANALOG
Splitter for ADSL2+ connections. This splitter is for analog PSTN connections.
Technical specifications
Connector A
Connector B
Connection
Suitable for
Type no.
TD2005
: RJ-11 female
: 2x RJ-11 female
: Analog ADSL 2+splitter
: Analog PSTN
Supplier no.
TD2005
Description
ADSL2/2+ Splitter
ISDN ADSL SPLITTER
ISDN ADSL Splitter
This splitter is used to split up the ADSL and the ISDN signals. The splitter is placed between the ISRA and the
NT1.
•
Including double-sided tape
Technical specifications
Connector A
Connector B
Connection
Measurement
Type no.
TD2012
: RJ-11 female
: 2x RJ-11 female
: ISDN ADSL splitter
: 65x34x20 mm
Supplier no.
TD2012
Description
ISDN ADSL Splitter NL
TELEPHONE / ADSL SPLITTER - BELGIAN MODEL
Telephone / ADSL Splitter - Belgian model
This splitter is used for ADSL connections over analogue (PSTN / POTS) lines.
ADSL will be connected with RJ-11 connector. The telephone will be connected to the front with the standard
Belgian phone plug.
Technical specifications
ADSL CONNECTION MATERIAL
Connector
Connection
Type no.
TD2020
: Belgian telephone connection
: Analog ADSL splitter Belgian connection
Supplier no.
TD2020
Description
PSTN ADSL Splitter Belgium
RJ-11 - SCREW TERMINAL ADAPTER
RJ-11 - Screw Terminal Adapter
Connection block, RJ-11 to 2-position screw terminals.
Technical specifications
Connector
Mounting side
: RJ-11 female
: Screw
Type no.
TD2050
Description
RJ-11 to 2 Terminals
260
Supplier no.
TD2050
ISDN CONNECTION MATERIAL
ISDN MALE TERMINATOR - 100 OHM
Technical specifications
Cable
Connector
Mounting Side
: 100 Ohm (ISDN)
: RJ-45 male
: Terminator
Type no.
FA642T
Description
ISDN Male Terminator
Supplier no.
FA642T
ISDN SPLITTER - 2X FEMALE - 1X MALE
ISDN Splitter - 2x female - 1x male
2 port splitter with male-end cable, terminated by two 100 Ohm resistors
Technical specifications
Connector In
Connector Out
Use
: RJ-45 male
: 2x RJ-45 female
: Universal
Type no.
DN1020
Ports
2
Supplier no.
DN1020
ISDN SPLITTER - 3X FEMALE
ISDN Splitter - 5x female - 1x male
5 port splitter with male-end cable, terminated by two 100 Ohm resistors
Connector In
Connector Out
Use
: RJ-45 male
: 5x RJ-45 female
: Universal
Type no.
DN1040
Ports
5
Supplier no.
DN1040
ISDN CONNECTION MATERIAL
Technical specifications
261
IN WALL BOXES
IN-WALL BOX UNSHIELDED 2 PORTS GERMAN STYLE
•
Compatible with Krone Tool
Technical specifications
Ports
Type no.
FA5008
FA6008
: 2x RJ-45
Supplier no.
FA5008
FA6008
Type
CAT5E
CAT6
CAT5E UTP WALL TERMINATION UNIT FLUSH MOUNTIN
CAT5E UTP wall termination unit flush mounting 110 Block, complete set.
Technical specifications
Cable
Connector
Mounting side
: UTP Solid
: 2x RJ-45 female CAT5E
: 110 block
Type no.
JD1015
Connector
2 x RJ-45 Female
Supplier no.
JD1015
IN-WALL BOX SHIELDED 2 PORTS GERMAN STYLE
•
Compatible with Krone Tool
Technical specifications
Ports
WALL MOUNTING MATERIAL
Type no.
FA5009
FA6009
FA7009
: 2x RJ-45
Supplier no.
FA5009
FA6009
FA7009
Type
CAT5E
CAT6
CAT6A
Kijk voor meer inbouwdozen bij Molex op pagina 204.
262
WALL MOUNTING BOXES
MODULAR SURFACE UNITS TELEPHONE SINGLE RJ-11/RJ-12/RJ-45
Modular surface units telephone single RJ-11/ RJ12/ RJ-45, bottom entry.
Technical specifications
Mounting
Type no.
TD1704
TD1706
TD1708
: Screw contacts
Supplier no.
TD1704
TD1706
TD1708
Connector
1x RJ-11
1x RJ-12
1x RJ-45
MODULAR SURFACE UNITS TELEPHONE DOUBLE RJ-11/RJ-12/RJ-45
Modular surface units telephone double RJ-11/ RJ12/ RJ-45, bottom entry.
Technical specifications
Mounting side
: Screw contacts
Type no.
TD2704
TD2708
Connectors
2x RJ-11
2x RJ-45
Supplier no.
TD2704
TD2708
PTT / RJ-11 WALL TERMINATION UNIT SURFACE MOUN
PTT / RJ-11 wall termination unit surface mounting
Technical specifications
Type no.
TD1900
: Phone plug Holland female
Supplier no.
TD1900
Description
PTT / RJ11
WALL MOUNTING MATERIAL
Connector
SURFACE MOUNTED BOX UNSHIELDED 1 PORTS
•
IDC compatible with 110 & Krone tool
Technical specifications
Ports
Type no.
FA5003
FA6003
: 1x RJ-45
Supplier no.
FA5003
FA6003
Type
CAT5E
CAT6
263
WALL MOUNTING BOXES
SURFACE MOUNTED BOX UNSHIELDED 2 PORTS
•
IDC compatible with 110 & Krone tool
Technical specifications
Ports
Type no.
FA5002
FA6002
: 2x RJ-45
Supplier no.
FA5002
FA6002
Type
CAT5E
CAT6
SURFACE MOUNTED BOX UNSHIELDED 2 PORTS GERMAN STYLE
•
Compatible with Krone Tool.
Technical specifications
Ports
Type no.
FA5006
FA6006
: 2x RJ-45
Supplier no.
FA5006
FA6006
Type
CAT5E
CAT6
SURFACE MOUNTED BOX UNSHIELDED 8 PORTS
•
IDC compatible with 110 & Krone tool
Technical specifications
Ports
Colour
WALL MOUNTING MATERIAL
Type no.
FA5000
FA6000
: 8x RJ-45
: White
Supplier no.
FA5000
FA6000
Type
CAT5E
CAT6
SURFACE MOUNTED BOX SHIELDED 1 PORTS
•
IDC compatible with 110 & Krone tool
Technical specifications
Ports
Type no.
FA5005
FA6005
FA7005
264
: 1x RJ-45
Supplier no.
FA5005
FA6005
FA7005
Type
CAT5E
CAT6
CAT6A
WALL MOUNTING BOXES
SURFACE MOUNTED BOX SHIELDED 2 PORTS
•
IDC compatible with 110 & Krone tool
Technical specifications
Ports
Type no.
FA5004
FA6004
FA7004
: 2x RJ-45
Supplier no.
FA5004
FA6004
FA7004
Type
CAT5E
CAT6
CAT6A
SURFACE MOUNTED BOX SHIELDED 2 PORTS GERMAN STYLE
•
Compatible with Krone Tool.
Technical specifications
Ports
Type no.
FA5007
FA6007
: 2x RJ-45
Supplier no.
FA5007
FA6007
Type
CAT5E
CAT6
SURFACE MOUNTED BOX SHIELDED 8 PORTS
•
•
IDC compatible with 110 & Krone tool
Metal housing.
Technical specifications
Type no.
FA5001
FA6001
FA7001
: 8x RJ-45
: Black
Supplier no.
FA5001
FA6001
FA7001
Type
CAT5E
CAT6
CAT6A
WALL MOUNTING MATERIAL
Ports
Colour
265
WALL MOUNTING PARTS
SINGLE SURFACE BOX
Single surface box.
Technical specifications
Color
Type no.
CD581
: Ivory
Supplier no.
CD581
Description
Single Wall Mount Box
FRONT PLATE JUNG 1X RJ
Front plate JUNG 1x RJ with slide.
Technical specifications
Color
Brand
Type no.
5691WE
5692WE
: Ivory
: JUNG
Supplier no.
5691WE
5692WE
Suitable for
1 x RJ-45
2 x RJ-45
SEPARATE COVER PLATES
Separate cover plates.
Technical specifications
Color
WALL MOUNTING MATERIAL
Type no.
5581JG
: Ivory
Supplier no.
5581JG
Description
Single Face Plate
DUAL SURFACE BOX
Dual surface box.
Technical specifications
Color
Type no.
CD582
266
: Ivory
Supplier no.
CD582
Description
Dual Wall Mount Box
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising