Eiki LC-XB26 Owner`s manual

Eiki LC-XB26 Owner`s manual
MULTIMEDIA PROJECTOR
MODEL
LC-XB26
LC-XB21
OWNER’S MANUAL
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector
utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
◆
Compact Design
◆
Blackboard Function
Blackboard✳ can be used as a projection screen.
This projector is designed compact in size and weight. It is
easy to carry and work anywhere you wish to use.
✳ The board color is limited to Green.
(See page 32 and 38.)
◆
Compatibility
◆
The projector widely accepts various video and computer
input signals including; Computers, 6 Color systems,
Component video, S-video and RGB scart.
◆
Simple Computer System Setting
The Film function reproduces pictures faithful to the original
film quality from 3:2 pull-down video contents.
(See page 40.)
◆
Digital Zoom (for Computer)
◆
Power Management
◆
User’s Logo
A projected image can be captured and used for the
starting display of the projector with the Capture function.
You can also display the captured image in an interval
during your presentation instead of blackout image with the
No show function. (See page 25 and 44.)
◆
Selectable Lamp Mode
Brightness of the projection lamp can be selected in the
Setting menu. (See page 45.)
2
Switcheable Interface Terminal
The projector provides a switcheable interface terminal.
You can use the terminal as computer input or monitor
output conveniently. (See page 44.)
The Power management function reduces power
consumption and maintain the lamp life. (See page 45.)
◆
Multilanguage Menu Display
Operation menu is available in 12 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Russian, Chinese, Korean, or Japanese.
(See page 42.)
The digital zoom function expands (to approx. 16 times of
screen size) or compress the image size, allowing you to
focus on crucial information at a presentation.
(See page 34.)
◆
PIN Code Lock Function
The PIN code lock function prevents others except users
from using the projector. (See page 20 and 47.)
The projector has the Multi-scan system to conform to
almost all computer output signals quickly. (See page 24,
28, and 42.)
◆
Film Function
◆
Auto Setup Function
For quick and easy setup of the projector, Auto Setup
function is provided. Vertical auto keystone correction and
Auto PC adjustment is performed with just pressing one
button. (See page 24 and 42.)
Table of Contents
Features and Design . . . . . . . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . . . . . . . .3
To the Owner . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions . . . . . . . . . . . . . . . . . . . .5
Computer Input
. . . . . . . . . . . . . . . . . . . . .27
Input Source Selection
27
Computer System Selection
28
Auto PC Adjustment
29
6
Manual PC Adjustment
30
Installing the Projector in Proper Position
6
Image Level Selection
32
Moving the Projector
6
Image Level Adjustment
33
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions . . . . . . . . . . . . . .8
Screen Size Adjustment
34
Air Circulation
Front
8
Back
8
Bottom
8
Rear Terminal
9
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .35
Input Source Selection (Video, S-Video)
35
Input Source Selection (Component, RGB Scart 21-Pin) 36
Video System Selection
37
Image Level Selection
38
Image Level Adjustment
39
Screen Size Adjustment
41
Top Control
10
Remote Control
11
Laser Pointer Function
12
Pointer Function
12
Wireless Mouse Operation
13
Operating Range
13
Warning Indicator
49
Remote Control Code
14
Cleaning the Air Filters
50
Remote Control Battery Installation
14
Attaching the Lens Cover
50
Cleaning the Projection Lens
51
51
Installation . . . . . . . . . . . . . . . . . . . . . . . . . .15
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting
42
Maintenance and Cleaning . . . . . . . . . . . . .49
Positioning the Projector
15
Cleaning the Projector Cabinet
Adjustable Feet
15
Lamp Replacement
52
Connecting the AC Power Cord
16
Lamp Replace Counter
53
Connecting to a Computer
17
Connecting to Video Equipment
18
Troubleshooting
54
19
Menu Tree
56
Indicators and Projector Condition
58
Connecting to Component Video Equipment
Basic Operation . . . . . . . . . . . . . . . . . . . . . .20
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . .54
20
Compatible Computer Specifications
59
Turning Off the Projector
21
Technical Specifications
60
How to Operate the On-Screen Menu
22
Optional Parts
61
Menu Bar
23
Configurations of Terminals
62
Zoom and Focus Adjustment
24
PIN Code Number Memo
63
Auto Setup Function
24
Keystone Adjustment
25
Turning On the Projector
Picture Freeze Function
25
No Show Function
25
P-Timer Function
26
Sound Adjustment
26
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
3
To the Owner
Before operating this projector, read this manual thoroughly
and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for
a considerable time.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections and try
the solutions in the “Troubleshooting” section in the end of
this booklet. If the problem still persists, contact the dealer
where you purchased the projector or the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.
Safety Precaution
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
– This projector produces intense light from the projection
lens. Do not stare directly into the lens as possible. Eye
damage could result. Be especially careful that children do
not stare directly into the beam.
– Install the projector in a proper position. If not, it may
result in a fire hazard.
– Provide appropriate space on the top, sides and rear of the
projector cabinet for allowing air circulation and cooling the
projector. Minimum clearance must be maintained. If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained. Do
not cover the ventilation slot on the projector. Heat buildup can reduce the service life of your projector, and can
also be dangerous.
SIDE and TOP
REAR
20cm
50cm
50cm
50cm
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the ventilation holes.
– If the projector is not to be used for an extended time,
unplug the projector from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
CAUTION
Not for use in a computer room as defined in the Standard for
the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
Ne puet être utillisé dans une salle d’ordinateurs telle que
définie dans la norme ANSI/NFPA 75 Standard for Protection
of Electronic Computer/Data Processing Equipment
4
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Follow all warnings and instructions marked on the projector.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest
on the power cord. Do not locate this projector where the
cord may be damaged by persons walking on it.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to ensure reliable operation of the
equipment and to protect it from overheating.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
Voor de klanten in Nederland
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
NL
Bij dit product zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren
als KCA.
Do not install the projector near the ventilation duct of airconditioning equipment.
5
Safety Instructions
Air Circulation
Installing the Projector in Proper Position
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered.
Install the projector properly. Improper Installation may reduce
the lamp life and cause a fire hazard.
20˚
Do not tilt the projector more than 20
degrees above and below.
CAUTION
20˚
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable objects near the vent.
– Keep the exhaust vent at least 3’(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will become
hot while the projector is being used.
– Do not put anything on the cabinet. The materials put on
the cabinet will not only get damaged but also cause fire
hazard by heat.
Cooling fans are provided to cool down the projector. This
projector monitors internal temperature and control the
running speed of the cooling fans.
Do not point the projector up to
project an image.
Do not point the projector down to
project an image.
Do not put the projector on either
side to project an image.
Air Intake Vent
Moving the Projector
When moving the projector, replace the Lens Cover and
retract Adjustable Feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period, put
it into the case (carrying bag) supplied with the projector.
CAUTION
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Carrying Bag (supplied) is intended for protection from dust
and scratches on the surface of a cabinet, and it is not
designed to protect an appliance from external forces. Do not
transport a projector through a courier or transport services
with this bag, otherwise the projector can be damaged. When
handling a projector, do not drop, bump, subject it to strong
forces or put other things on the cabinet.
USE CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
– Do not drop or bump a projector, otherwise damages or
malfunctions may result.
– When carrying a projector, use a suitable carrying case.
– Do not transport a projector by using a courier or transport
service in an unsuitable transport case. This may cause
damage to a projector. To transport a projector through a
courier or transport service, consult your dealer for their
information.
6
Compliance
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Model Number
Trade Name
Responsible party
Address
Telephone No.
: LC-XB26, LC-XB21
: EIKI
: EIKI International, Inc.
: 30251 Esperanza, Rancho Santa Margarita, CA 92688-2132
: 800-242-3454 (949-457-0200)
AC POWER CORD REQUIREMENT
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug
will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to
insert the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
7
Part Names and Functions
Front
q
w
e
r
t
y
u
Power Cord Connector
Infrared Remote Receiver
Zoom Lever
Focus Ring
Projection Lens
Lens Cover (See page 50 for attaching.)
Air Intake Vent
i Top Controls and Indicators
o Air Intake Vent
!0 Terminals and Connectors
!1 Speaker
q
Back
w ert
!6
y
i
u
o
!0
!2 Lamp Cover
!3 Air Intake Vent (back and bottom)
!4 Air Filter
!5 Adjustable Feet
!6 Exhaust Vent
CAUTION
Hot air is exhausted from the exhaust vent.
Do not put heat-sensitive objects near this
side.
!1
Bottom
!5
8
!2
!3
!4
Part Names and Functions
Part Names and Functions
Rear Terminal
q
w
e
t
AUDIO IN
R
L (MONO) VIDEO
COMPUTER IN 1
DVI - I
✽
r
SERVICE PORT
S-VIDEO
y
USB
COMPUTER /
COMPONENT
RESET
AUDIO IN
AUDIO OUT
MCI
COMPUTER IN 2 /
COMPONENT IN /
MONITOR OUT
Do not press this button. This button is used for optional
accessories.
q COMPUTER IN 1 DVI-I
Connect output signal from a computer (Digital/Analog
DVI-I type) or Multi Card Imager (optional) to this
terminal. (p17)
w SERVICE PORT
This jack is used to service this projector.
e AUDIO IN
Connect the audio output from video equipment
connected to r or i to this jack. (When the audio
output is monaural, connect it to L (MONO) jack.) (p18)
r VIDEO
Connect the composite video output from video
equipment to VIDEO jack. (p18)
t USB (Series B)
When operating the connected computer with the
remote control, connect USB port of your computer to
this connector with a USB cable. (p17)
✽
(VARIABLE)
o
i
u
y AUDIO IN COMPUTER/ COMPONENT
Connect the audio output (stereo) from a computer or
video equipment connected to q or o to this jack.
(p 17, 19)
u AUDIO OUT(VARIABLE)
Connect an external audio amplifier to this jack.
(p17- 19)
This terminal outputs sound from AUDIO IN terminal (e
or y).
i S-VIDEO
Connect the S-VIDEO output from video equipment to
this jack. (p18)
o COMPUTER IN 2/ COMPONENT IN/ MONITOR OUT
This terminal is switcheable and can be used for input
from a computer, video equipment (Component or RGB
Scart) or output to the other monitor. Optional cables
are required when using this terminal as component
input or RGB Scart 21-Pin Video input. (p61)
Set the terminal up as either Computer input or Monitor
output properly. (Used for Monitor out, this terminal
outputs only incoming signal from COMPUTER IN 1 DVII terminal.) (p17, 19, 44)
A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the RESET
button with a pen, which will shut down and restart the unit. Do not use the
RESET function excessively.
9
Part Names and Functions
Top Control
q w
e
r
t
y
ON - OFF
POWER
INPUT
SELECT
VOLUME +
AUTO SET UP
VOLUME –
WARNING
LAMP
REPLACE
MENU
o
q AUTO SETUP button
Corrects vertical keystone distortion and adjusts
computer display parameters including Fine sync., Total
dots and Picture position. (p24, 42)
w INPUT button
Selects input source. (p27, 36 )
e POWER ON–OFF button
Turns the projector on or off. (p20, 21)
r SELECT button
Executes the item selected. It is also used to expand/
compress the image in Digital zoom +/– mode. (p34)
t POWER indicator
Blinks red until the projector gets ready to be turned on.
It turns red when the projector is in the stand-by mode.
It remains green while the projector is under operation.
10
i
u
y WARNING indicator
Lights red when the projector detects abnormal
condition. This also blinks red when the internal
temperature of the projector exceeds the operating
range. (p49)
u LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws
to an end. (p52)
i POINT (ed7 8 ) button
Selects an item or adjusts value in the On-Screen Menu.
These are also used to pan the image in the Digital zoom
+/– mode. (p34)
Point 7 8 button are used as VOLUME +/– button.
(p26)
o MENU button
Opens or closes the On-Screen Menu. (p22)
Part Names and Functions
Part Names and Functions
q L-CLICK button
Remote Control
Acts as left click for wireless mouse operation. (p13)
w SIGNAL EMISSION indicator
This indicator lights red while the laser beam is being emitted from the laser light
window or a signal is being sent from the remote control to the projector.
e AUTO PC button
Operates the Auto PC adjustment function. (p29)
q
r D.ZOOM button
Selects the Digital zoom +/– mode and resize the image. (p34)
t FREEZE button
Freezes the projected picture. (p25)
y IMAGE button
Selects image levels.(p32, 38)
u PAGE UP/DOWN button
Turns pages; the Up button to the previous page and the Down button to the next
page for an image from a computer. Connect the projector and your computer with
a USB cable before use. (See page 17.)
ed7 8) button
i POINT (e
Selects an item or adjusts value in the On-Screen Menu. These are also used to pan
the image in the Digital zoom +/- mode. (p34)
Point 7 8 button are also used as VOLUME +/- buttons. (p26)
o PRESENTATION POINTER button
w
e
r
Move a pointer of the projector or a pointer for wireless mouse operation. (p12)
!4
t
y
!5
u
!7
!0 MENU button
Opens or closes the On-Screen Menu. (p22)
!1 KEYSTONE button
!6
Corrects keystone distortion. (p25, 42)
!2 SELECT button
!8
Executes the item selected, or to expand or compress image in the Digital zoom +/mode. (p34)
i
!3
o
!0
!1
!2
!3
!9
@0
@1
LASER button
Operates the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. This button is also used as a
switching button to activate the Pointer function of the projector. (p12)
!4 POWER ON-OFF button
Turns the projector on or off. (p20, 21)
!5 NO SHOW button
Turns the picture into black image. (p25)
!6 P-TIMER button
Operates P-Timer function. (p26)
!7 MUTE button
@2
Mutes sound. (p26)
!8 AUTO SET button
Corrects vertical keystone distortion and adjusts PC display parameters. (p24, 42)
!9 R-CLICK button
Acts as right click for wireless mouse operation. (p13)
@0 COMPUTER button
Selects input source (COMPUTER 1 or COMPUTER 2). (p27, 36)
@1 VIDEO button
Selects input source (VIDEO). (p35)
@2 RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for
power saving when it is not used. Slide this switch to "RESET" to initialize the
remote control code or switch Spotlight and Pointer back to Laser pointer. (p12, 14)
11
Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam from the laser light window. With the LASER button pressed, laser light goes on.
The signal emission indicator lights red and laser is emitted with red light. With the LASER button pressed for more than 1
minute or released, the light goes off.
The laser emitted is a class II laser. Do not look into the laser light window or shine the laser beam on yourself or other
people. Below are the caution labels for laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure. Do not look into the laser light window while laser is emitted, otherwise eye
damage may result.
These caution labels are put on the remote control.
Signal Emission Indicator
Laser Light Window
Pointer Function
You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.
1
2
3
With pressing the MENU button, hold down the NO SHOW
button for more than 7 seconds so that the Pointer function
will be available. (The Laser pointer has switched to the
Pointer.)
Press the LASER button on the remote control toward the
projector. Spotlight or Pointer is displayed on the screen with
the LASER button lighting green. Then move the Spotlight
or Pointer with the PRESENTATION POINTER button. If the
LASER button does not light green and still emits laser
beam, try the procedure above until the LASER button lights
green.
NO SHOW button
While pressing the MENU button, hold
down the NO SHOW button for more
than 7 seconds.
PRESENTATION POINTER button
MENU button
To clear the Spotlight or Pointer out the screen, press the
LASER button toward the projector and see if the LASER
button lighting turns off.
To switch back to the Laser pointer again, hold down the NO
SHOW button with pressing the MENU button for more than
7 seconds or slide the RESET/ON/ALL-OFF switch to
"RESET". (p11)
Spotlight
Pointer
PRESENTATION POINTER button
LASER button
✔Note:
You can choose the size of Spotlight (Large, Middle, and Small) and the pattern of
Pointer (Arrow, Finger, and Dot) in the Setting Menu. See “Pointer” on page 46.
12
After the Laser pointer has switched to
the Pointer, use the LASER button as the
Pointer function ON-OFF switch. Press
the LASER button toward the projector
and see if it lights green.
Part Names and Functions
Part Names and Functions
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect
your computer and the projector with the supplied USB cable. (See page 17 for connection.)
When the Pointer function is used, the wireless mouse is not available.
PRESENTATION POINTER button
Move the pointer on the screen
with this button.
L-CLICK button
Acts as left click while the
projector and a computer are
connected with a USB cable.
R-CLICK button
Acts as right click while the
projector and a computer are
connected with a USB cable.
Operating Range
Point the remote control toward the projector (Infrared
Remote Receiver) whenever pressing any button. Maximum
operating range for the remote control is about 16.4’ (5m)
and 60° in front of the projector.
16.4’
(5 m)
60°
Remote control
13
Part Names and Functions
Remote Control Code
This projector has eight different remote control codes (Code 1-Code 8). Switching remote control codes prevents remote
control interference when operating several projectors or video equipment at the same time. Change the remote control
code for the projector first before changing that for the remote control. See “Remote control” in Setting on page 46.
1
With holding down the MENU button, press the IMAGE
button. The code switches sequentially for one pressing the
IMAGE button. (See the list below.)
2
To initialize the remote control code, slide the
RESET/ON/ALL-OFF switch to RESET, and then to ON. The
initial code is Code 1. (p11)
Remote Control Code
Number of Times of
Pressing IMAGE Button
Code 1
1
Code 2
2
Code 3
3
Code 4
4
Code 5
5
Code 6
6
Code 7
7
Code 8
8
IMAGE button
While pressing the MENU
button, press the IMAGE
button number of times
corresponding to the remote
control code.
MENU button
Remote Control Battery Installation
1
Remove the battery
compartment lid.
Press the lid downward
and slide it.
2
Slide the batteries into
the compartment.
3
Replace the compartment
lid.
Two AA size batteries
For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.
To insure safe operation, please observe the following precautions :
● Use (2) AA, UM3 or LR6 type alkaline batteries.
● Replace two batteries at the same time.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture, or heat.
● Do not drop the remote control.
● If a battery has leaked on remote control, carefully wipe case clean and install new batteries.
● Risk of explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
14
Installation
Positioning the Projector
Installation
This projector is designed to project on a flat projection surface and can be focused from 3.3’(1.0m) - 25.3’(7.7m). Refer to
the figure and the table below for the screen size and the distance between the projector and the screen.
A:B = 9:1
25.3' (7.7m)
300”
(Inch Diagonal)
16.4' (5.0m)
12.5' (3.8m)
195”
195”
8.2' (2.5m)
150”
3.3' (1.0m)
Min. Zoom
A
127”
100”
40”
Max. Zoom
97”
64”
(Center)
B
Screen Size
(W x H) mm
4 : 3 aspect ratio
40”
100”
150”
195”
300”
813 x 610
2032 x 1524
3048 x 2286
3962 x 2972
6096 x 4572
Zoom (min)
4.9' (1.5m)
12.8' (3.9m)
19.3' (5.9m)
25.3' (7.7m)
––-––
Zoom (max)
3.3' (1.0m)
8.2' (2.5m)
12.5' (3.8m)
16.4' (5.0m)
25.3' (7.7m)
✔Note:
• The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.
• The values shown above are approximate and may vary from the actual size.
Adjustable Feet
Projection angle can be adjusted up to 11.8 degrees with the
adjustable feet.
1
Lift the front of the projector and pull upward the feet lock
latches on both sides of the projector.
2
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to adjust the position and tilt.
3
To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
automatically with Auto Setup function or manually with the
remote control or the menu operation. (p24, 25, and 42)
Feet Lock Latches
Adjustable Feet
15
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or 200-240
V AC. This projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce risk of electrical
shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of the type of power being supplied.
Connect the projector with all peripheral equipment before turning
the projector on. (See page 17-19 for connection.)
CAUTION
For safety, unplug AC power cord when the projector is not in
use. When this projector is connected to an outlet with AC
power cord, it is in Stand-by mode and consumes a little electric
power.
Connect AC power cord (supplied) to the
projector.
The AC outlet must be near this equipment and
must be easily accessible.
NOTE ON THE POWER CORD
The AC Power Cord must meet the requirement of the country where you use the projector.
Confirm the AC plug type with the chart below. The proper AC Power Cord must be used.
If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.
Projector side
AC Outlet side
For the U.S.A. and Canada
For Continental Europe
Ground
To the POWER CORD
CONNECTOR on the
projector.
16
To the AC Outlet.
(120 V AC)
To the AC Outlet.
(200 - 240 V AC)
Installation
Connecting to a Computer
Installation
Cables used for connection
• VGA Cable (HDB 15 pin) ✽
• DVI-VGA Cable (HDB 15 pin)
• USB Cable
• Audio Cables (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
Audio cable (stereo) ✽
Audio Output
USB cable
USB port
External Audio Equipment
VGA cable ✽
Monitor Output
Monitor Output
Audio Input
DVI-VGA cable
Monitor Input
COMPUTER IN 1 DVI-I
COMPUTER IN 2/ COMPONENT
IN/ MONITOR OUT
AUDIO IN
R
L (MONO) VIDEO
COMPUTER IN 1
DVI - I
VGA cable ✽
SERVICE PORT
S-VIDEO
USB
COMPUTER/ COMPONENT
AUDIO IN
Audio cable ✽
(stereo)
USB
COMPUTER /
COMPONENT
RESET
AUDIO IN
AUDIO OUT
MCI
COMPUTER IN 2 /
COMPONENT IN /
MONITOR OUT
(VARIABLE)
COMPUTER IN 2/ COMPONENT
IN/ MONITOR OUT
AUDIO OUT
(stereo)
This terminal is switcheable. Set up
the terminal as either Computer input
or Monitor output. (See Page 44.)
✔Note:
When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
ON
ON
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
17
Installation
Connecting to Video Equipment
Cables used for connection
• Video and Audio Cable (RCA x 3) ✽
• S-VIDEO Cable ✽
• Audio Cables (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
S-Video Output
Composite Video and
Audio Output
(R)
(L)
(Video)
External Audio Equipment
S-Video cable ✽
Video and audio
cable✽
Audio Input
S-VIDEO
(R)
(L)
AUDIO IN
VIDEO
AUDIO IN
R
L (MONO) VIDEO
COMPUTER IN 1
DVI - I
SERVICE PORT
S-VIDEO
USB
Audio cable ✽
(stereo)
COMPUTER /
/ COMPONENT
COMPONENT
RESET
AUDIO IN
AUDIO OUT
MCI
COMPUTER IN 2 /
COMPONENT IN /
MONITOR OUT
(VARIABLE)
(VARIABLE)
AUDIO OUT
(stereo)
✔Note:
• The S-VIDEO jack has priority over the VIDEO jack under the condition of connecting
both the S-VIDEO jack and the VIDEO jack when selecting AUTO in the Input
Menu.
• Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the
COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal as input.
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
18
Installation
Connecting to Component Video Equipment
Installation
Cables used for connection
• Audio Cables (Mini Plug (stereo) x 2 or RCA x 2) ✽
• Scart-VGA Cable ✽
• Component-VGA Cable ✽
(✽ = Not supplied with this projector.)
RGB Scart 21-pin Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Audio Output
External Audio Equipment
Scart-VGA cable ✽
Component-VGA
cable✽
Audio cable ✽
(stereo)
Audio Input
COMPUTER IN 2/
COMPONENT IN/
MONITOR OUT
COMPUTER IN 2/
COMPONENT IN/
MONITOR OUT
AUDIO IN
R
L (MONO) VIDEO
COMPUTER IN
IN 11
COMPUTER
DVI--II
DVI
SERVICE PORT
S-VIDEO
COMPUTER/ COMPONENT
AUDIO IN
USB
COMPUTER /
/ COMPONENT
COMPONENT
Audio cable ✽
(stereo)
RESET
RESET
AUDIO IN
AUDIO OUT
MCI
COMPUTERIN
IN22//
COMPUTER
COMPONENTIN
IN//
COMPONENT
MONITOR OUT
OUT
MONITOR
(VARIABLE)
(VARIABLE)
AUDIO OUT
(stereo)
✔Note:
• Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the
COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal as input.
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
19
Basic Operation
Turning On the Projector
1
Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.
2
Connect the projector's AC power cord into an AC outlet.
The POWER indicator blinks red in a moment and lights red.
3
Press the POWER ON-OFF button on the top control or on
the remote control. The POWER indicator turns green
lighting and the cooling fans start to operate. The
preparation display appears on the screen and the count
down starts.
16
4
After the count-down, the input source that was selected
last and the Lamp mode status icon (see page 45) appear on
the screen.
The preparation display disappears after 20 seconds.
Selected Input Source and Lamp Mode
Lamp mode
(See page 45 for Lamp mode.)
If the projector is locked with a PIN code, PIN code Input
Dialog Box will appear. Enter the PIN code as instructed
below.
Enter a PIN code
Select a number by pressing the Point 7 8 button and fix the number with
the SELECT button. The number will change to "✳". If you fixed a wrong
number, move the pointer to "Set" or "Clear" once by pressing the Point d
button, then return to "PIN code". Enter the correct number again.
Repeat this step to complete entering a four-digit number.
PIN code Input Dialog Box
Pointer
When the four-digit number is fixed, the pointer will automatically move to
"Set". Press the SELECT button so that you can start to operate the
projector.
If you entered a wrong PIN code, "PIN code" and the number (✳✳✳✳) will
turn red and disappear. Enter a correct PIN code all over again.
After the OK icon
disappears, you can
operate the projector.
What is PIN code?
PIN code is a security code using Personal Identification Number that
allows the person who knows it to operate the projector. Setting PIN code
prevents others except the specific users from operating the projector.
A PIN code consists of a four-digit number. Refer to PIN Code Lock
function in Setting on page 47 for locking operation of the projector with
your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Set a new PIN code with special
care, write it down in column on page 63 of this
manual, and keep it at hand. Should the PIN code be
missing or forgotten, consult your dealer or service
center.
20
Basic Operation
Turning Off the Projector
1
Press the POWER ON-OFF button on the top control or on
the remote control, and a message "Power off?" appears on
the screen.
2
Press the POWER ON-OFF button again to turn off the
projector. The POWER indicator starts to blink red, and it
continues while the cooling fans are operating for about 90
seconds. (About 120 seconds when the fan mode is L2. See
page 48.)
3
The message disappears after 4 seconds.
When the projector has cooled down enough to be turned on
again, the POWER indicator lights red. Then you can
disconnect the AC power cord.
Basic Operation
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE POWER
INDICATOR LIGHTS RED. OTHERWISE IT WILL
RESULT IN SHORTENING LAMP LIFE.
✔Note:
• The projector cannot be turned on during the cooling period with the POWER
indicator blinking red. You can turn it on again after the POWER indicator lights red.
• When the On start function is on, this projector is turned on automatically by
connecting the AC power cord to an AC outlet. (See page 45 for the On start
function.)
• Do not operate the projector continuously without rest. Continuous use may result
in shortening the lamp life. Turn off the projector and give it a rest about an hour in
every 24 hours.
• This projector monitors internal temperature and automatically controls the
running speed of the cooling fans.
• If the WARNING indicator blinks or lights red, see “Warning Indicator” on page 49.
21
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages regarding each adjustment and
setting procedure.
On-Screen Menu
Menu icon
1
Press the MENU button to display the On-Screen Menu.
2
Press the Point 7 8 buttons to select a Menu icon to adjust.
Press the Point ed buttons to select an item to adjust.
Pointer (red frame)
Press the Point d button to
move the pointer.
3
Press the SELECT button to show the item data. Press the
Point 7 8 buttons to adjust the data. Refer to the following
pages for respective adjustment.
Item
Menu bar
Pointer
(red frame)
SELECT
button
✔Note:
The selected item is not in effective until the SELECT button is pressed.
Item data
Press the Point 7 8 buttons
to adjust value.
Quit to exit this menu.
Remote Control
POINT button
SELECT button
MENU button
Top Control
ON - OFF
POINT button
(outer ring)
POWER
INPUT
SELECT
VOLUME +
AUTO SET UP
VOLUME –
WARNING
LAMP
REPLACE
MENU
SELECT button
MENU button
22
Basic Operation
Menu Bar
For computer source
Guide Window
PC System Menu
Image Select Menu
Screen Menu
Setting Menu
Shows the selected
Menu of the OnScreen Menu.
Used to select
computer system.
(p28)
Used to select an image
level among Dynamic,
Standard, Real,
Blackboard(Green), and
Image 1 ~ 4. (p32)
Used to adjust size
of image. [Normal
/ True / Wide /
Digital zoom +/–]
(p34)
Used to change
settings of the
projector or reset lamp
replace counter.
(p42-48)
Basic Operation
Input Menu
PC Adjust Menu
Image Adjust Menu
Sound Menu
Used to select
input source
either Computer
or Video. (p27)
Used to adjust
parameters to
match with input
signal format.
(p29-31)
Used to adjust computer image.
[Contrast / Brightness / Color
temp. / White balance (R/G/B) /
Sharpness / Gamma] (p33)
Used to adjust
volume or mute
sound. (p26)
For video source
Same function as
menu for computer
source.
Input Menu
Image Select Menu
Screen Menu
Used to select
input source
either Video or
Computer.
(p35-36)
Used to select an image
level among Dynamic,
Standard, Cinema,
Blackboard(Green) and
Image 1 ~ 4. (p38)
Used to set size
of image to
Normal or Wide.
(p41)
AV System Menu
Image Adjust Menu
Used to select
system of selected
video source.
(p37)
Used to adjust picture image.
[Contrast / Brightness / Color / Tint /
Color temp. / White balance (R/G/B) /
Sharpness / Gamma / Progressive /
Film] (p39-40)
Same function as menu
for computer source.
23
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the projected picture focus.
Zoom Lever
Focus Ring
Auto Setup Function
Auto Set Up function is provided to automatically correct Keystone
distortion according to the projector's tilt and adjust the computer
display parameters (Fine sync, Total dots and Picture position) by
just pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control. The operational setup for
the Auto Setup can be changed in the Setting menu.
Refer to p42 on setting of the Auto Setup function.
Remote Control
AUTO SET button
✔Note:.
• Auto Keystone corrects vertical distortion only, not correct horizontal distortion.
• Auto Keystone cannot work when Ceiling feature is On in the Setting menu. (p44)
• Perfect correction of the image distortion cannot be ensured with the Auto Setup
function. If the distortion cannot be corrected properly by pressing the AUTO
SETUP/ AUTO SET button, adjust manually by pressing the KEYSTONE button on
the remote control or selecting Keystone in the Setting menu. (p25, 42)
Top Control
ON - OFF
POWER
INPUT
MENU
24
SELECT
VOLUME +
AUTO SET UP
VOLUME –
WARN
LA
REP
AUTO SETUP button
Basic Operation
Keystone Adjustment
If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO
SET on the remote control, correct the image manually as follows:
1
Press the KEYSTONE button on the remote control or select
Keystone in the Setting Menu (p42). The keystone dialog
box appears.
2
Correct keystone distortion by pressing the Point ed78
button.
Keystone adjustment can be memorized. (p42)
Reduce the lower width
with Point d button.
Reduce the left part with
Point 7 button.
Basic Operation
Reduce the upper width
with Point e button.
• The arrows are white when there is no correction.
• The arrows disappear at the maximum correction.
• The direction of the arrow being corrected turns red.
• If you press the KEYSTONE button on the top control
or on the remote control once more while the
keystone dialog box is being displayed, the keystone
adjustment will be canceled.
Reduce the right part with
Point 8 button.
Picture Freeze Function
Press the FREEZE button on the remote control to freeze the
picture on the screen. To cancel FREEZE, press the FREEZE
button again or press any other button. (p11)
No Show Function
Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. When a projected image is captured and
set as “User” in the Logo item in the Setting Menu (p44), the
screen changes each time you press the NO SHOW button as
follows.
black out ➜ the captured image ➜ normal ➜ • • • • •
The message disappears after 4 seconds.
25
Basic Operation
P-Timer Function
Press the P-TIMER button on the remote control. The timer
display “00 : 00” appears on the screen and the timer starts to
count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. And then, press
the P-TIMER button again to cancel the P-Timer function.
Sound Adjustment
Direct Operation
indicates approximate
level of volume.
Volume
Press the VOLUME (+/–) button on the top control or on the
remote control to adjust volume. The volume dialog box appears
on the screen for a few seconds.
(+) button to turn up the volume and (–) button to turn down the
volume.
Mute
Press the MUTE button on the remote control to cut off sound.
To restore sound to its previous level, press the MUTE button
again or press the VOLUME (+/–) button.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Sound Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to select, and then press the SELECT
button.
Volume
Press the Point 8 button to turn up the volume, and press the
Point 7 button to turn down the volume.
Mute
Press the Point 7 8 button to cut off sound. Dialog box display is
changed to “On” and sound is cut off. To restore sound to its
previous level, press the Point 7 8 button again.
26
Sound Menu
Sound Menu icon
indicates approximate
level of volume.
closes the Sound Menu.
Computer Input
Input Source Selection
Direct Operation
Choose either Computer 1 or Computer 2 by pressing the INPUT
button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
INPUT button
Computer 1
Computer 2
✳
Video
COMPUTER button
Computer 1
Computer 2
✳
✳ See Note on the bottom of this page.
Input Menu icon
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Input Menu icon.
Press the Point d button to move the red arrow pointer to
either Computer 1 or Computer 2, and then press the
SELECT button.
3
After the Source Select Menu appears for Computer 1,
move the pointer to RGB and then press the SELECT button.
RGB (Analog)
Move the pointer (red
arrow) to Computer 1
and press the SELECT
button.
✳ See Note on the bottom of this page.
Computer
1
Source Select Menu
When the input source is analog coming from a
computer through the DVI terminal, select RGB
(Analog).
Move the pointer to
RGB(Analog), RGB (PC
Digital), or RGB(AV HDCP)
and press the SELECT
button.
RGB (PC Digital) When the input source is digital coming from a
computer through the DVI terminal, select RGB
(PC Digital)
RGB (AV HDCP)
RGB
Computer Input
2
Input Menu
Input Menu
When the input source compatible with HDCP
is coming from video equipment through the
DVI terminal, select RGB (AV HDCP).
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
When the input source is analog coming from a
computer through the COMPUTER IN
2/COMPONENT IN/MONITOR OUT terminal,
select RGB.
Computer
2
✔Note:
• Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/
MONITOR OUT terminal is set as Monitor out. (p44)
• HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital
entertainment content delivered by DVI (Digital Visual Interface) from being copied.
The specification of HDCP is decided and controlled by Digital Content Protection,
LLC. Should the specification be changed, this projector may not display the digital
content protected by HDCP.
Source Select Menu
Move the pointer to RGB and
press the SELECT button.
27
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan
system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal
format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is
shown on page 59 )
✔Note:
The projector may display one of the following messages.
Auto
When the projector cannot recognize connected
signal conforming to PC Systems provided in this
projector, Auto PC Adjustment function works to
display proper images and the message “Auto” is
displayed on the PC System menu box. When the
image is not projected properly, manual adjustment is
required. (p30, 31)
-----
There is no signal input from computer. Check the
connection of your computer and the projector. (See
" Troubleshooting" p54)
Mode 1
User preset system manually adjusted in PC Adjust
menu. Adjustment data can be stored in Mode 1 - 5.
(p30, 31)
SVGA 1
PC Systems provided in the projector. The projector
chooses a proper system and displays it.
PC System Menu
The Auto PC Adjustment
function operates to adjust the
projector.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC System Menu
PC system can also be selected manually.
28
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the PC System Menu icon.
2
Press the Point d button to move the red arrow pointer to
the system that you want to set, and then press the SELECT
button.
The PC System Menu icon
displays the system being
selected.
Systems on this dialog box
can be selected.
Custom Mode (1~5) set in the
PC Adjust Menu. (p30, 31)
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to
your computer. Auto PC Adjustment function can be operated as follows.
Auto PC Adj.
1
Press the MENU button to display the On-Screen Menu.
Press the Point 7 8 button to move the red frame pointer to
PC Adjust Menu icon.
2
Press the Point d button to move the red frame pointer to
Auto PC Adj. icon and then press the SELECT button twice.
This Auto PC Adjustment can be also executed by pressing
the Auto PC button on the remote control unit.
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer to
the Auto PC Adj. icon and
press the SELECT button.
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector. Once parameters are memorized, the
setting can be done just by selecting Mode in the PC System
Menu (p28). See “Store” on page 31.
✔Note:
Computer Input
• Fine sync, Total dots and Picture Position of some computers can not be fully
adjusted with this Auto PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are required. (p30, 31)
• The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i,
or 1080i is selected in the PC System Menu.
29
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5
independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a
specific computer.
PC Adjust Menu icon
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the PC Adjust Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to adjust and then press the SELECT
button. An adjustment dialog box will appear. Press the
Point 7 8 button to adjust value.
PC Adjust Menu
Move the red frame pointer to
an item and press the SELECT
button.
Fine sync
Eliminates flicker from the image displayed. Press the Point 7 8
button to adjust value. (From 0 to 31)
Total dots
Adjusts the number of total dots in one horizontal period. Press
the Point 7 8 button and adjust number to match your PC image.
Selected Mode
Shows status
(Stored / Free) of the
selected Mode.
Horizontal
Adjusts horizontal picture position. Press the Point 7 8 button to
adjust the position.
Press the Point 7 8 button to
adjust the value.
Vertical
Adjusts vertical picture position. Press the Point 7 8 button to
adjust the position.
Current mode
Press the SELECT button at
this icon to adjust the other
items.
Press the SELECT button to show H-Freq. and V-Freq. of the
connected computer.
Clamp
Adjusts clamp level. When the image has dark bars, try this
adjustment.
Current mode
Press the SELECT button at
the Current mode icon to
show the information of the
connected computer.
30
Computer Input
Display area
Select the resolution at the Display area dialog box.
Press the SELECT button at
the Display area icon and the
Display area dialog box
appears.
Display area H
Adjusts the horizontal area displayed by this projector. Press the
Point 7 8 button to decrease/increase value and then press the
SELECT button.
Display area
Display area V
Adjusts the vertical area displayed by this projector. Press the
Point 7 8 button to decrease/increase value and then press the
SELECT button.
Full screen
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
Resets all adjustment to their previous levels.
To store adjustment data
This Mode has parameters being stored.
Store
Computer Input
To store adjustment data, move the red frame pointer to the Store
icon and then press the SELECT button. Move the red arrow
pointer to any of Mode 1 to 5 in which you want to store and then
press the SELECT button.
Mode free
To clear adjustment data previously set, move the red frame
pointer to the Mode free icon and then press the SELECT button.
Move the red arrow pointer to the Mode that you want to clear
and then press the SELECT button.
Vacant Mode
shows values of “Total
dots,” “Horizontal,”
“Vertical,” “Display area
H,” and “Display area V.”
Quit
Exits the PC Adjust Menu.
To clear adjustment data
closes this dialog box.
✔Note:
Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be selected
when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or “1080i” is selected in the
PC System Menu (p28).
31
Computer Input
Image Level Selection
Direct Operation
IMAGE button
Select an image level among Dynamic, Standard, Real,
Blackboard(Green), Image 1, Image 2, Image 3, and Image 4 by
pressing the IMAGE button on the remote control.
Dynamic
Standard
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Blackboard(Green)
Image 1
Real
Picture level with improved halftone for graphics.
Image 2
Blackboard(Green)
Picture level suitable for the image projected on a blackboard
(Green).
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored board, not
truly effective on a black colored board.
Image 3
Image 4
Image 1~4
User preset image in the Image Adjust Menu (p33).
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Image Select Menu icon.
2
Press the Point d button to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
Image Select Menu icon
Image Select Menu
Move the red frame pointer to
the level and press the
SELECT button.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
Picture level suitable for the image projected on a blackboard
(Green). See above for further description.
Image 1~4
User preset image in the Image Adjust Menu (p33).
32
The level being selected.
Computer Input
Image Level Adjustment
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Image Adjust Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to adjust, and then press the SELECT
button. The level of each item is displayed. Adjust each
level by pressing the Point 7 8 button.
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the SELECT button.
Contrast
Press the Point 7 button to decrease contrast and the Point 8
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust image darker and the Point 8
button to adjust image brighter. (From 0 to 63.)
Selected Image level
Color temp.
Press the Point 7 button or the Point 8 button for Color temp.
level that you want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point 7 8 button to
adjust value.
Computer Input
Press the Point 7 button to lighten red tone and the Point 8
button to deepen red tone. (From 0 to 63.)
White balance (Green)
Press the Point 7 button to lighten green tone and the Point 8
button to deepen green tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 button to lighten blue tone and the Point 8
button to deepen blue tone. (From 0 to 63.)
Store icon
Press the SELECT button at
this icon to store the
adjustment.
Sharpness
Press the Point 7 button to soften the image and the Point 8
button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point 7 8 button to obtain better balance of contrast.
(From 0 to 15.)
Reset
Resets all adjustment to their previous levels.
Image Level Menu
Move the red frame pointer to
any of Image 1 to 4 where you
want to set and then press
the SELECT button.
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the SELECT button. The
Image Level Menu will appear. Move the red frame pointer to the
Image 1 to 4 where you want to set and then press the SELECT
button.
Quit
Closes the Image Adjust Menu.
33
Computer Input
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Screen Menu icon.
2
Press the Point d button and move the red frame pointer to
the function that you want to select and then press the
SELECT button.
Screen Menu
Screen Menu icon
Move the red frame to the
function and press the SELECT
button.
Normal
Provides image to fit screen size.
True
Provides image in its original size. When the original image size is
larger than the screen size (1024 x 768), this projector enters
“Digital zoom +” mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When the Digital zoom + is selected, the On-Screen Menu
disappears and the message “D. Zoom +” is displayed. Press the
SELECT button to expand the image size. And press the Point
ed7 8 button to pan the image. The Panning function can work
only when the image is larger than the screen size.
A projected image can be also expanded by pressing the D.ZOOM
▲ button on the remote control.
Digital zoom –
When the Digital zoom – is selected, the On-Screen Menu
disappears and the message “D. Zoom –” is displayed. Press the
SELECT button to compress the image size.
A projected image can be also compressed by pressing the
D.ZOOM ▼ button on the remote control.
To exit the Digital Zoom +/– mode, press any button except the
D.ZOOM ▲/▼, SELECT, and Point button.
To return to the normal screen, press the KEYSTONE button twice,
press the D.ZOOM ▲▼ button or select Normal from the Screen
menu.
34
✔Note:
• This Screen Menu cannot be operated when “720p(HDTV)”,
“1035i (HDTV)”, or “1080i (HDTV)” is selected in the PC
System Menu (p28).
• The True and Digital zoom +/– cannot be selected when
“480i”, “575i”, “480p”, or “575p” is selected in the PC
System Menu (p28).
• This projector cannot display any resolution higher than
1280 X 1024. If your computer’s screen resolution is higher
than 1280 X 1024, reset the resolution to the lower before
connecting to the projector.
• The image data in other than XGA (1024 x 768) is modified
to fit the screen size in initial mode.
• The panning function may not operate properly if the
computer system prepared in the PC Adjust Menu is used.
Video Input
Input Source Selection (Video, S-Video)
INPUT button
Direct Operation
Video
Choose Video by pressing the INPUT button on the top control or
the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Computer 1
Computer 2
✳
VIDEO button
Video
✳ See Note on the bottom of this page.
Input Menu icon
Menu Operation
1
2
3
Input Menu
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Input Menu icon.
Press the Point d button to move the red arrow pointer to
Video and then press the SELECT button. The Source Select
Menu will appear.
Move the pointer to the source that you want to select and
then press the SELECT button.
When selecting Auto, the projector automatically
detects incoming video signal, and adjusts itself to
optimize its performance. The projector selects
connection in the following order:
1st S-Video
2nd Video
The S-VIDEO jack has priority over the VIDEO jack
under the condition of connecting both the S-VIDEO
jack and the VIDEO jack.
Video
When video input signal is connected to the VIDEO
jack, select Video.
S-Video
When video input signal is connected to the S-VIDEO
jack, select S-Video.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the
source that you want to
select and press the
SELECT button.
Video Input
Auto
Move the pointer to Video
and press the SELECT
button.
✔Note:
When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is
not displayed. (p44)
35
Video Input
Input Source Selection (Component, RGB Scart 21-Pin)
Direct Operation
INPUT button
Computer 1
Choose Computer 2 by pressing the INPUT button on the top
control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Computer 2
✳
Video
COMPUTER button
Computer 1
Computer 2
✳
✳ See Note on the bottom of this page.
Menu Operation
1
Input Menu icon
Input Menu
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Input Menu icon.
2
Press the Point d button to move the red arrow pointer to
Computer 2, and then press the SELECT button. The Source
Select Menu will appear.
3
Move the pointer to the correct input source and then press
the SELECT button.
Move the pointer (red arrow)
to Computer 1 and press the
SELECT button.
Computer
2
Source Select Menu
Component
When the input source is coming from video
equipment connected to the COMPUTER IN 2/
COMPONENT IN/ MONITOR OUT terminal with
a Component-VGA Cable, select Component.
RGB (Scart)
When the input source is coming from video
equipment connected to the COMPUTER IN 2/
COMPONENT IN/ MONITOR OUT terminal with
a Scart-VGA Cable, select RGB (Scart).
✔Note:
• Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 61
for order.
• Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/
MONITOR OUT terminal is set as Monitor out. (p44)
36
Move the pointer to
Component or RGB (Scart)
and press the SELECT
button.
Video Input
Video System Selection
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the AV System Menu icon.
2
Press the Point d button to move the red arrow pointer to
the system that you want to select and then press the
SELECT button.
Video or S-Video
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, it is
necessary to select a specific component video signal format
among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.
AV System Menu (Video or S-Video)
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the SELECT button.
AV System Menu (Component)
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the SELECT button.
Video Input
✔Note:
The AV System Menu cannot be selected when selecting RGB(Scart).
37
Video Input
Image Level Selection
Direct Operation
IMAGE button
Dynamic
Select a desired image level among Dynamic, Standard, Cinema,
Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 by
pressing the IMAGE button on the remote control.
Standard
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Blackboard(Green)
Image 1
Cinema
Picture level adjusted for the picture with fine tone.
Image 2
Blackboard(Green)
Picture level suitable for the image projected on a blackboard
(Green).
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored board, not
truly effective on a black colored board.
Image 3
Image 4
Image 1~4
User preset image in the Image Adjust Menu (p39, 40).
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Image Select Menu icon.
2
Press the Point d button to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
Image Select
Menu icon
Image Select Menu
Move the red frame pointer to a level
and press the SELECT button.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
Picture level suitable for the image projected on a Blackboard
(Green). See above for further description.
Image1~4
User preset image in the Image Adjust Menu (p39, 40).
38
The level being selected.
Video Input
Image Level Adjustment
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Image Adjust Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to adjust and then press the SELECT
button. The level of each item is displayed. Adjust each
level by pressing the Point 7 8 button.
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the SELECT button.
Contrast
Press the Point 7 button to decrease contrast and the Point 8
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust image darker and the Point 8
button to adjust image brighter. (From 0 to 63.)
Color
Press the Point 7 button to lighten color and the Point 8 button to
deepen color. (From 0 to 63.)
Tint
Press the Point 7 8 button to obtain proper color. (From 0 to 63.)
Color temp.
Press the Point 7 8 button for Color temp. level that you want to
select. (XLow, Low, Mid, or High)
Press the Point 7 8 button to
adjust value.
Press the SELECT button at
this icon to display other items.
White balance (Red)
Press the Point 7 button to lighten red tone and the Point 8
button to deepen red tone. (From 0 to 63.)
Press the SELECT button at
this icon to display previous
items.
White balance (Green)
Press the Point 7 button to lighten green tone and the Point 8
button to deepen green tone. (From 0 to 63.)
Video Input
White balance (Blue)
Press the Point 7 button to lighten blue tone and the Point 8
button to deepen blue tone. (From 0 to 63.)
Sharpness
Press the Point 7 button to soften the image and the Point 8
button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point 7 8 button to obtain better balance of contrast.
(From 0 to 15.)
✔Note:
The Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M, or PAL-N.
39
Video Input
Progressive
Interlaced video signal can be displayed in a progressive picture.
Off . . . .Not activated.
L1 . . . . .Select “L1” for an active picture.
L2 . . . . .Select “L2” for a still picture.
Image Level Menu
Move the red frame pointer
to an image icon to be set
and then press the SELECT
button.
Film
This function is effective on 3:2 pulldown video sources. With this
function On, the projector reproduces pictures faithful to the
original film quality.
Reset
Resets all adjustment to their previous figure.
Store
To store the adjustment data, move the red frame pointer to the
Store icon and press the SELECT button. The Image Level Menu
will appear. Move the red frame pointer to the Image Level 1 to 4
and then press the SELECT button.
Quit
Closes the Image Adjust Menu.
✔Note:
• Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is
selected. (p37)
• Film can only be activated when selecting NTSC for Video System and L1/ L2 for
Progressive.
• 3:2 Pulldown or Telecine transfer is the process of changing images from film mode
to video mode. While film runs at 24 frames per second (fps), NTSC television
signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded
up to 30fps and transferred using a proper field pattern to get the best film-like
images.
40
Store icon
Video Input
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 button to move the red frame
pointer to the Screen Menu icon.
2
Press the Point d button and move the red frame pointer to
the function that you want to select and then press the
SELECT button.
Screen Menu
Screen Menu icon
Move the red frame to a function and
press the SELECT button.
Normal
Provides image at a normal video aspect ratio of 4 : 3.
Wide
Provides image at a wide screen ratio of 16 : 9.
✔Note:
Screen Menu cannot be operated when “720p”, “1035i”, or “1080i” is selected in the
AV System Menu (p37).
Video Input
41
Setting
Setting
This projector has Setting menu that allows you to set up the
other various functions described as follows;
1
Press the MENU button to display the On-Screen Menu.
Press the Point 7 8 button to move the red frame pointer to
the Setting Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to set and then press the SELECT
button. The Setting dialog box appears.
Setting Menu (Language)
Set the red frame
pointer to the item
and press the
SELECT button.
Setting Menu icon
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
When pressing the SELECT
button at Language, the
Language Menu appears.
Auto Setup
This function enables Auto Keystone correction and Auto PC
adjustment by pressing the AUTO SETUP button on the top
control or the AUTO SET button on the remote control. Settings
for those functions can be altered as follows:
Auto PC Adj.
On . . . . . . .enables Auto PC Adjustment when pressing the
AUTO SET button on the remote control or the
AUTO SETUP button on the top control.
Off . . . . . . .disables Auto PC Adjustment.
Auto Keystone
Auto . . . . . . always works and corrects keystone distortion
according to the projector's tilt.
Manual . . . .works only when pressing the AUTO SET button on
the remote control or the AUTO SETUP button on
the top control.
Off . . . . . . .disables Auto Keystone.
✔Note:
• Auto PC Adj. and Auto Keystone cannot be set "Off" at the same time.
• Auto Keystone corrects vertical distortion only, not correct horizontal distortion.
• The Auto Keystone cannot work when Ceiling feature is On in the Setting menu.
(p44)
• Perfect correction of the image distortion cannot be ensured with the Auto Setup
function. If the distortion is not corrected properly by pressing the AUTO SETUP/
AUTO SET button, adjust manually by pressing the KEYSTONE button on the
remote control or selecting Keystone in the Setting menu. (See p25 or Keystone
feature below.)
Keystone
This function corrects distortion of a projected image. Select
either Store or Reset with the Point 7 8 button, and then press
the Select button. The keystone dialog box appears. Adjust
keystone with the Point ed button.
Store . . . . stores the keystone adjustment even if the AC
power cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power
cord is disconnected.
42
Auto Setup
Select Auto setup and this box
appears. Choose desired
setting for Auto keystone and
Auto PC adj. with the Point 7
8 button.
Setting
Blue back
When this function is “On,” the projector produces a blue image
while input signal is not detected.
Display
This function decides whether to display On-Screen Displays.
On . . . . . . . shows all the On-Screen Displays.
Off . . . . . . . does not show On-Screen Displays except;
●
●
●
●
●
On-Screen Menu
“Power off?” message
P-Timer
“No signal” message
”Wait a moment!” message
Logo PIN Code Lock
Logo PIN Code Lock
This function prevents an unauthorized person from changing the
Logo setting.
Off
. . . . .the Logo setting can be changed freely from the
Logo menu. (p44)
On . . . . . .the Logo setting cannot be changed without the
Logo PIN code.
If you want to change the Logo PIN Code Lock setting, enter a
Logo PIN code along the following steps. The initial Logo PIN code
is set "4321" at the factory.
Enter a Logo PIN code
Select a number by pressing the Point 7 8 button and fix the
number with the SELECT button. The number will change to "✳".
If you fixed a wrong number, move the pointer to "Set" or "Clear"
once by pressing the Point d button, then return to "Logo PIN
code". Enter the correct number again.
Logo PIN Code Lock Dialog Box
Pointer
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer will automatically
move to "Set". Press the SELECT button so that you can change
the Logo PIN code lock setting.
If you entered a wrong Logo PIN code, "Logo PIN code" and the
number (✳✳✳✳) will turn red and disappear. Enter a correct Logo
PIN code all over again.
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit number.
Select "Logo PIN code change" with the Point d button and press
the SELECT button. Set a new Logo PIN code.
Quit
After a correct Logo PIN code is entered, the
following dialog box will appear.
Select On/OFF by pressing the Point 7 8 button or
change the Logo PIN code.
Setting
Be sure to note the new Logo PIN code and keep it at hand. If
you lost the number, you could no longer change the Logo PIN
code setting. For details on PIN code setting, refer to relevant
instructions of the PIN Code Lock function on page 47.
43
Setting
Logo
This function decides what to be displayed on the starting-up
display as follows:
User . . . . . .the image you captured
Default . . . .the factory-set logo
Off . . . . . . .count-down only
Capture
Capture
This function enables you to capture the image being projected
and use it for a starting-up display or interval of presentations.
After capturing the projected image, go to the Logo function and
set it to “User”. Then the captured image can be displayed when
turning on the projector next time or pressing the NO SHOW
button. (p25)
To capture the image, select [Yes]. To cancel the Capture
function, select [No].
✔Note:
Select [Yes] to capture
the projected image.
• Before capturing an image, select Standard in the Image Select Menu to capture a
proper image. (See page 32, 38.)
• A signal from a computer can be captured up to XGA(1024 x 768). A signal from
video equipment can be captured except for 720p, 1035i, and 1080i.
• When capturing the image that has been adjusted by the Keystone function, the
adjustment data is automatically reset and the projector captures an image without
keystone adjustment.
• When the Logo PIN code lock function is On, the Logo and Capture menu cannot
be selected.
Select [Yes] to
stop capturing.
Ceiling
When this function is “On,” the picture is top/bottom and left/right
reversed. This function is used to project the image from a ceiling
mounting the projector.
Ceiling
Rear
When this function is “On,” the picture is left/right reversed. This
function is used to project the image to a rear projection screen.
Terminal
The COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal
on the back of the projector is switcheable for computer input or
monitor output. (See page 9) Select Computer 2 or Monitor Out
with the Point 78 button.
Computer 2 . . . . .computer input
Monitor Out . . . . .monitor out
Terminal item is not available when selecting Computer 2 to the
input source. Change the input source to the others (Computer1
or Video) so that the Terminal item will be available. (p27, 35, 36)
44
Rear
Setting
Standby mode
Standby mode
This function is available when using Multi Card Imager optionally
supplied, and it reduces standby energy when selecting Eco.
Eco
···· reduces standby energy.
Normal ···· consumes normal standby energy.
Power management
For reducing power consumption as well as maintaining the lamp
life, the Power Management function turns off the projection lamp
when the input signal is interrupted and no button is pressed for
30 seconds or more.
If the input signal is interrupted and no button is pressed for 30
seconds or more, the timer display with the message "No signal"
appears on the screen. The count-down of the set time will get
started. The count-down time can be set between 1 and 30
minutes.
When the count-down time has been elapsed, the lamp will be
turned off to cool itself down. The POWER indicator is blinking red
during this cooling-off period. The next operation depends on the
setting as follows :
Ready . . . . . .When the lamp has been fully cooled down, the
POWER indicator changes to green blinking. In
this condition, the projection lamp will be turned
on if the input signal is reconnected or any
button on the top control or remote control unit
is pressed.
Shutdown . . .When the lamp has been fully cooled down, the
power will be turned off.
Off . . . . . . . . .The Power Management function is canceled.
On start
Press the SELECT button at this
icon to display other items.
Power management
Time left until Lamp off
Press the SELECT button at
Power management and this
box appears. Choose one of
three settings with the Point 7
8 button, and go to the timer
with the Point ed button and
set time with the Point 7 8
button.
When this function is “On,” the projector is automatically turned
on just by connecting the AC power cord to a wall outlet.
✔Note:
Be sure to turn the projector off properly (see “Turning Off the Projector” on page
21). If the projector is turned off in the wrong steps, the On start function does not
operate properly.
Lamp mode
This function allows you to change brightness of the screen.
···· normal brightness
Setting
···· brightness according with the input signal
···· lower brightness reduces the lamp power consumption
and extends the lamp life.
45
Setting
Pointer
Pointer
You can emphasize a part of the projected image with this
function. Choose either Spotlight or Pointer with the Point ed
button and press the SELECT button. Then select one of three
different sizes (Large, Middle, and Small) of Spotlight or a pointer
of three different patterns (Arrow, Finger, and Dot) of Pointer.
(See page 12 for operation.)
Select Spotlight or
Pointer with the Point
ed button and press
the SELECT button.
Then select size or
pattern with the Point 7
8 button.
Remote control
This projector provides eight different remote control codes (Code
1-Code 8); the factory-set, initial code (Code 1) and the other
seven codes (Code 2 to Code 8). This switching function prevents
remote control interference when operating several projectors or
video equipment at the same time.
For example operating the projector in “Code 7”, both the
projector and the remote control must be switched to “Code 7”.
Remote control
To change the code for the projector;
Select a remote control code in this Setting Menu.
To change the code for the remote control;
While holding down the MENU button, press the IMAGE button
number of times corresponding to the remote control code for
the projector. (See page 14 for details.)
When pressing the SELECT button
at Remote control, the remote
control code menu appears.
USB
This projector is equipped with the USB port for interactive
operation between the projector and computer. Selects either of
the followings as needed.
···· When using the remote control as the wireless mouse
for a computer connected to the projector with a USB
cable. (p13, 17)
···· When controlling the projector with a computer.
This item is provided for future use. Unavailable now.
Key lock
This function locks operation of the top control and remote control.
It is useful to prevent operation by an unauthorized person.
···· not locked.
···· locks operation of the top control. To unlock, use the
remote control.
···· locks operation of the remote control. To unlock, use
the top control.
If the top control accidentally becomes locked and you do not have
the remote control nearby, disconnect the AC power cord from
the AC outlet, and then with pressing the SELECT button, reinsert
the AC power cord. This will cancel the top control lock.
46
Key lock
Select Key lock and
this box appears.
Choose one of
these with the
Point e d button
and select [Yes] to
activate it.
Setting
PIN code lock
PIN code lock
This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.
Off ...............the projector is unlocked with the PIN code.
On1 .............requires to enter the PIN code every time turning on
the projector.
...........requires
to enter the PIN code to operate the
On2
projector once the power cord is disconnected; as
long as the AC power cord is connected, the
projector can be operated without the PIN code.
When the projector is
locked with the PIN
code, the PIN code
lock mark appears on
the menu bar.
Whenever to change the PIN Code Lock setting or the PIN code
(the four-digit number), you are required to enter the PIN code.
"1234" is set as the initial PIN code at the factory.
Enter a PIN code
Pointer
Enter a PIN code
Select a number by pressing the Point 7 8 button and fix the
number with the SELECT button. The number will change to
"✳". If you fixed a wrong number, move the pointer to "Set" or
"Clear" once by pressing the Point d button, then return to "PIN
code". Enter the correct number again.
Repeat this step to complete entering a four-digit number.
Quit
When the four-digit number is fixed, the pointer will
automatically move to "Set". Press the SELECT button so that
you can change the following PIN code lock settings.
The input numbers
change to “✳” for
security.
If you entered a wrong PIN code, "PIN code" and the number
(✳✳✳✳) will turn red and disappear. Enter a correct PIN code
all over again.
To Change the PIN Code Lock setting
Select Off, On1, or On2 with the Point 7 8 button and then
"Quit" with the Point d button and press the SELECT button to
close the dialog box.
To Change the PIN Code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point d button, and press
the SELECT button. The New PIN code input dialog box will
appear.
When the pointer
automatically move
to "Set", press the
SELECT button.
Change the PIN Code Lock setting
Select a desired
setting with the
Point 7 8 button.
Change the PIN code
Select PIN code
change and press
the SELECT button.
The New PIN code
input dialog box will
appear.
Select a number with the Point 7 8 button and fix the number
with the SELECT button. Repeat it to complete entering a fourdigit number. When the four-digit number is fixed, the pointer
will automatically move to "Set". Then press the SELECT
button.
Setting
CAUTION:
WHEN YOU HAVE CHANGED PIN CODE, WRITE DOWN THE
NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO
ON PAGE 63, AND KEEP IT SECURELY. SHOULD THE PIN
CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO
LONGER BE OPERATED.
The input numbers
are being displayed
for confirmation.
47
Setting
Fan
Fan
This function provides you the following alternatives in the cooling
fans operation after turning off the projector. (p21)
L1 . . . . . . . .normal operation
L2 . . . . . .slower operation than the normal (L1) , but takes
longer to cool down the projector. In this mode,
cooling time after turning off the projector will be
extended longer than in the normal mode.
Lamp counter reset
This function is used to reset the lamp replace counter. When
replacing the projection lamp, reset the lamp replace counter by
using this function. See page 53 for operation.
Factory default
Factory default
This function returns all setting values except for the user logo,
PIN code lock, logo PIN code lock and the lamp counter to the
factory default settings.
Select Factory default and this
box appears. Select [Yes] , and
the next box appears.
Select [Yes] to
activate it.
48
Maintenance and Cleaning
Maintenance & Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING indicator is blinking red.
WARNING
LECT
VOLUME +
When the temperature inside the projector exceeds the normal
temperature, the projector is automatically shut down to protect
the inside of the projector. The POWER indicator is blinking and
the projector is being cooled down. When the temperature inside
the projector returns to normal, the POWER indicator lights red
and the projector can be turned on.
TOP CONTROL
LAMP
REPLACE
WARNING
blinking red
✔Note:
After the temperature inside the projector returns to normal, the WARNING indicator
still continues to blink. When the projector is turned on again, the WARNING
indicator stops blinking.
Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if ventilation
slots are not blocked.
– Is the projector not installed near the ventilation duct of airconditioning equipment which may be hot? Install the
projector away from the ventilation duct of air-conditioning
equipment.
– Are the air filters clean? Clean the air filters periodically. (p50)
The projector is shut down and the WARNING indicator lights red.
WARNING
LECT
VOLUME +
When the projector detects an abnormal condition, it is
automatically shut down to protect the inside and the WARNING
indicator lights red. In this case, disconnect the AC power cord
and reconnect it, and then turn the projector on once again for
check. If the projector is still turned off and the WARNING
indicator lights red, disconnect the AC power cord and contact the
service station for check and repair.
TOP CONTROL
LAMP
REPLACE
WARNING
lights red
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC
POWER CORD CONNECTED UNDER THE ABNORMAL
CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK.
49
Maintenance and Cleaning
Cleaning the Air Filters
Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up and
adversely affect the life of the projector. Clean the air filters following the steps below.
1
Turn off the projector, and disconnect the AC power cord
from the AC outlet.
2
Turn the projector upside down and remove the air filters by
pulling the latches upward.
3
Clean the air filters with a brush or rinse them softly.
Clean the ventillation slots around the air filter too.
4
When cleaning the air filters by rinsing, dry them well.
Replace the air filters properly. Make sure that the air filters
are fully inserted.
CAUTION
Air Filter
Pull up and remove.
Do not operate the projector with the air filters removed.
Dust may accumulate on the LCD panel and the
projection mirror degrading picture quality.
Do not put small parts into the air intake vents. It may
result in malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when
operating the projector. Usage in these environments may
cause poor image quality.
When using the projector under dusty or smoky conditions, dust
may accumulate on a lens, LCD panels, or optical elements inside
the projector. This condition may degrade the quality of a
projected image.
When the symptoms above are noticed, contact your authorized
dealer or service station for proper cleaning.
Attaching the Lens Cover
When moving this projector or while not using it over an extended
period of time, replace the lens cover.
1
Pass the string through a hole of the lens cover.
2
Turn the projector upside down.
3
Attach the string with lens cover to a hole on the bottom of
the projector and secure it with a screw.
Lens Cover
String for the lens cover
Secure it to the hole with
a screw.
Hole
50
Maintenance and Cleaning
Maintenance & Cleaning
Cleaning the Projection Lens
Follow these steps to clean the projection lens.
1
Disconnect the AC power cord before cleaning.
2
Softly wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use lens cleaning paper or a commercially
available air blower to clean the lens. Avoid using an
excessive amount of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface.
3
When the projector is not in use, replace the lens cover.
Cleaning the Projector Cabinet
Follow these steps to clean the projector cabinet.
1
Disconnect the AC power cord before cleaning.
2
Softly wipe the projector body with a soft, dry cleaning cloth.
When it is heavily soiled, use a small amount of mild
detergent and finish with a soft, dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners,
solvents, or other harsh chemicals might scratch the surface.
3
When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and
scratches.
51
Maintenance and Cleaning
Lamp Replacement
When the life of the projection lamp of this projector draws to an
end, the LAMP REPLACE indicator lights yellow. If this indicator
lights yellow, replace the lamp with a new one promptly.
Top Control
POWER
WARNING
VOLUME +
This indicator lights yellow
when the life of the projection
lamp draws to an end.
SELECT
CAUTION
LAMP
REPLACE
CAUTION
Allow a projector to cool, for at least 45 minutes before
you open the Lamp cover. The inside of the projector
can become very hot.
For continued safety, replace with a lamp of the same
type. Do not drop a lamp or touch a glass bulb! The
glass can shatter and may cause injury.
Lamp Cover
Screw
Follow these steps to replace the lamp.
1
Turn off the projector and disconnect the AC plug. Allow the
projector to cool for at least 45 minutes.
2
Loosen the screw with a screwdriver, and remove the lamp
cover.
3
Loosen 2 screws of the lamp with a screwdriver and pull out
the lamp by grasping the handle.
4
Replace the lamp with a new one and tighten the 2 screws
back into position. Make sure that the lamp is set properly.
Replace the lamp cover and tighten the screw.
5
Connect the AC power cord to the projector and turn on the
projector.
6
Reset the Lamp replace counter.
See “Lamp Replace Counter” on the next page .
Lamp
Screw
Screw
Handle
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following
information to the dealer.
●
Model No. of your projector
● Replacement Lamp Type No.
:
:
LC-XB26/ LC-XB21
POA-LMP65 (for LC-XB26)
(Service Parts No. 610 307 7925)
POA-LMP55 (for LC-XB21)
(Service Parts No. 610 309 2706)
52
Maintenance and Cleaning
Maintenance & Cleaning
Lamp Replace Counter
Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP
REPLACE indicator stops lighting.
1
Turn the projector on, press the MENU button and the OnScreen Menu will appear. Press the Point 7 8 button to
move the red frame pointer to the Setting Menu icon.
2
Press the Point d button to move the red frame pointer to
the Lamp counter reset item and then press the SELECT
button. The message "Lamp replace counter Reset?" is
displayed. Move the pointer to [Yes] and then press the
SELECT button.
3
Another confirmation dialog box appears and select [Yes] to
reset the Lamp replace counter.
Move the pointer to Lamp
counter reset and then press the
SELECT button. The message
“Lamp replace counter Reset?”
is displayed.
✔Note:
Do not reset the Lamp replace counter without implementation of lamp replacement.
Be sure to reset the Lamp replace counter only after replacing the lamp.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper
handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter
period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use
of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who are
familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
53
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer"
and “Connecting to Video Equipment” on page17-19.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When you operate the projector with a computer and it does not project an image, restart the computer.
54
Problem:
– Solutions
No power
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait 90-120 seconds after the projector is turned OFF when turning the
projector back on. The projector can be turned on after the POWER
indicator turns red. (See “Turning Off the Projector” on page 21.)
– Check the WARNING indicator. If the WARNING indicator lights red, the
projector cannot be turned on. (See "Warning Indicator" on page 49.)
– Check the projection lamp. (See page 52.)
– Unlock Key lock for the projector in the Setting Menu. (See page 46.)
Image is out of focus.
– Adjust focus of the projector. (See page 24.)
– Provide proper distance between the projector and the projection
screen. (See page 15.)
– Check the projection lens to see if it needs cleaning. (See page 51.)
– Moving the projector from a cool to a warm place may result in moisture
condensation on the projection lens. In such cases, leave the projector
OFF and wait until condensation disappears.
No image
– Check the connection between your computer or video equipment
and the projector. (See page 17–19)
– See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output when
connecting to a projector. See your computer’s instruction manual for the
setting.
– It takes about 20 seconds to display an image after turning on the projector.
– See if the selected system is corresponding with your computer or video
equipment. (See page 28 and 37)
– Select correct input source once again through menu operation.
(See page 27, 35 and 36)
– Make sure the temperature is not out of the specified Operating
Temperature (5°C ~ 35°C).
Image is Left/Right reversed.
Image is Top/Bottom reversed.
– Check the Ceiling / Rear item. (See “Setting” on page 44.)
– Check the Ceiling item. (See “Setting” on page 44.)
No sound
–
–
–
–
Check audio cable connection from audio input source.
Adjust the audio source.
Press the Volume (+) button. (See page 26.)
Press the Mute button. (See page 26.)
Appendix
Some displays are not seen
during the Operation.
– Check the Display item. (See “Setting” on page 43.)
PIN code dialog box appears at start-up. – PIN code lock is being set. Input a PIN code (1234 or numbers you have
set). (See “PIN code lock” on page 20 and 47.)
– Select Computer 2 at the Terminal item in the Setting Menu. (See “Setting”
on page 44.)
The Terminal item cannot be selected.
– The Terminal item in the Setting Menu cannot be selected after Computer 2
is selected. Select other input source such as Computer 1 or Video with the
INPUT button on the top control, the COMPUTER button or the VIDEO
button on the remote control so that the Terminal item can be selected.
The Remote Control does not work.
– Check the batteries.
– Make sure no obstruction is between the projector and remote control.
– Make sure you are not too far from the projector when using the remote
control. Maximum operating range is 16.4’ (5m).
– Make sure the code of the remote control is conformed to the projector.
(See page 14 and 46.)
– Unlock Key lock for the remote control in the Setting Menu. (See page 46.)
Appendix
Computer 2 cannot be selected.
Wireless Mouse function does not work. – Make sure your computer is connected to the projector with a USB cable.
(See page 17.)
– Check cable connection between the projector and your computer.
(See page 17.)
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the
service center. Give the model number and explain about the problem. We will advise you how to obtain service.
The CE Mark is a Directive conformity
mark of the European Community (EC).
This symbol on the nameplate means the product is
Listed by Underwriters Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
55
Appendix
Menu Tree
Computer Input / Video Input
Input
Computer 1
Computer 2
Video
Sound
RGB( Analog )
Go to System (1)
RGB( PC Digital )
N/A
RGB( AV HDCP )
N/A
RGB
Go to System (1)
Component
Go to System (2)
RGB( Scart )
N/A
Auto
Go to System (3)
Video
Go to System (3)
S-Video
Go to System (3)
✽N/A - - - not applicable
Sound
Volume
Mute
Quit
0 - 63
On / Off
Computer Input
System (1)
Image Select
Dynamic
Standard
Real
Blackboard(Green)
Image 1
Image 2
Image 3
Image 4
Image Adjust
0 - 31
Contrast
Brightness
Color Temp
0 - 63
0 - 63
High
Mid
Low
XLow
640 x 480
720 x 400
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1400 x 1050
Quit
Red
Green
Blue
Sharpness
Gamma
Reset
Store
On / Off
Yes / No
Quit
0 - 63
0 - 63
0 - 63
0 - 15
0 - 15
Yes / No
Image 1
Image 2
Image 3
Image 4
Quit
MODE 1
MODE 2
SVGA 1
----
✽Systems displayed in the System Menu vary
depending on an input signal.
PC Adjust
Auto PC Adj.
Fine sync.
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area
Display area - H
Display area - V
Full screen
Reset
Mode free
Store
Quit
56
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Screen
Normal
True
Wide
Digital zoom +
Digital zoom –
Appendix
Setting
Video Input
Auto
1080i
1035i
720p
575p
480p
575i
480i
System (3)
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Image Select
Image Adjust
Contrast
Brightness
Color
Tint
Color Temp
Film
Reset
Store
Quit
Normal
Wide
Language
Auto setup
English
German
French
Italian
Spanish
Portuguese
Dutch
Swedish
Russian
Chinese
Korean
Japanese
Quit
Auto PC adj.
Auto keystone
Dynamic
Standard
Cinema
Blackboard(Green)
Image 1
Image 2
Image 3
Image 4
Red
Green
Blue
Sharpness
Gamma
Progressive
Screen
Setting
Appendix
System (2)
Keystone
Blue back
Display
Logo PIN code lock
Store / Reset
On / Off
On / Off
Off
On
PIN code change
Quit
Logo
0 - 63
0 - 63
0 - 63
0 - 63
High
Mid
Low
XLow
Standby mode
Off
User
Default
Yes/No
On / Off
On / Off
Computer 2
Monitor out
Eco / Normal
Power management
Off
On start
Lamp mode
On / Off
Normal
Auto
Eco
0 - 63
0 - 63
0 - 63
0 - 15
0 - 15
Off
L1
L2
On/ Off
Yes / No
Image 1
Image 2
Image 3
Image 4
Quit
Pointer
Fan
Spotlight
Pointer
Quit
Code 1 - 8
Quit
Mouse / Projector
Off
Projector
Remote Control
Quit
Off
On1
On2
PIN code change
Quit
L1 / L2
Lamp counter reset
Factory default
Yes / No
Yes / No
Capture
Ceiling
Rear
Terminal
Ready
Shut down
Timer(1-30 Min)
Quit
Remote control
USB
Key lock
PIN code lock
Quit
57
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
POWER
WARNING
LAMP
REPLACE
red/green
red
yellow
Projector Condition
The projector is OFF. (The AC power cord is unplugged.)
• • • lights green.
✽ When
✽
The projector is preparing for stand-by or the projection lamp is being
cooled down. The projector cannot be turned on until cooling is completed.
✽
The projector is ready to be turned on with the POWER ON-OFF button.
✽
The projector is operating normally.
✽
The projector is in the Power management mode.
✽
The temperature inside the projector is abnormally high. The projector
cannot be turned on. When the projector is cooled down enough and the
temperature returns to normal, the POWER indicator lights red and the
projector can be turned on. (The WARNING . indicator keeps blinking.)
Check and clean the Air filter.
✽
The projector has been cooled down enough and the temperature returns
to normal. When turning on the projector, the WARNING indicator stops
blinking. Check and clean the air filters.
✽
The projector detects an abnormal condition and cannot be turned on.
Unplug the AC power cord and plug it again to turn on the projector. If the
projector is turned off again, disconnect the AC power cord and contact the
dealer or the service center for service and checkup. Do not leave the
projector on. It may cause electric shock or a fire hazard.
• • • blinks green.
• • • lights red.
• • • blinks red.
• • • off
the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights
yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp.
See page 52 and 53.
58
Appendix
Compatible Computer Specifications
LC-XB26/LC-XB21 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than
140 MHz of Dot Clock.
ON-SCREEN
DISPLAY
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
––––––––
––––––––
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
H-Freq.
(kHz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
15.625
15.734
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
V-Freq.
(Hz)
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
50.00
(Interlace)
60.00
(Interlace)
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
ON-SCREEN
DISPLAY
RESOLUTION
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
MAC 21
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 21
MAC
MAC
480p
575p
720p
1035i
1080i
1080i
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1400 x 1050
1280 x 960
1280 x 1024
––––––––
––––––––
––––––––
––––––––
––––––––
––––––––
H-Freq.
(kHz)
35.522
46.90
47.00
58.03
60.24
68.68
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.9 7
61.85
46.43
63.79
63.90
75.00
80.00
31.47
31.25
45.00
33.75
33.75
28.125
V-Freq.
(Hz)
H-Freq.
(kHz)
60.276
31.65
45.00
33.75
33.75
28.125
V-Freq.
(Hz)
58.069
29.80
60.00
86.96
(Interlace)
58.20
58.30
72.00
75.08
75.06
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
Appendix
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
575i
480i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
RESOLUTION
86.00
(Interlace)
94.00
(Interlace)
60.01
72.00
66.00
86.70
(Interlace)
60.18
60.00
75.08
75.08
59.88
50.00
60.00
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
When an input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAY
D-VGA
D-480p
D-575p
D-SVGA
D-XGA
D-SXGA 1
RESOLUTION
640 x 480
––––––––
––––––––
800 x 600
1024 x 768
1280 x 1024
H-Freq.
(kHz)
31.47
31.47
31.25
37.879
43.363
63.98
V-Freq.
(Hz)
59.94
59.94
50.00
60.32
60.00
60.02
ON-SCREEN
DISPLAY
D-SXGA 2
D-SXGA 3
D-720p
D-1035i
D-1080i
D-1080i
RESOLUTION
1280 x 1024
1280 x 1024
––––––––
––––––––
––––––––
––––––––
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
59
Appendix
Technical Specifications
Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Feet Adjustment
Multi-media Projector
11.73" x 2.8" x 8.58" (298mm x 71mm x 218mm) (Not including adjustable feet)
6.2 lbs (2.8kgs)
0˚ to 11.8˚
Panel Resolution
LCD Panel System
Panel Resolution
Number of Pixels
0.8" TFT Active Matrix type, 3 panels
1,024 x 768 dots
2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System
High Definition TV Signal
Scanning Frequency
PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz
Optical Information
Projection Image Size (Diagonal)
Projection Lens
Throw Distance
Projection Lamp
Adjustable from 40" to 300"
F 1.7 ~ 2.5 lens with f 20.0 mm ~ 30.0 mm with manual zoom and focus
3.3' ~ 25.3' (1.0m ~ 7.7m)
200W
Interface
Video Input Jack
S-Video Input Jack
Audio Input Jacks
Computer Input 1 Terminal
Computer Input 2/ Component Input / Monitor
Output Terminal
Computer/ Component Audio Input Jacks
Service Port Connector
USB Connector
Audio Output Jack
RCA Type x 1
Mini DIN 4 pin x 1
RCA Type x 2
DVI-I Terminal (Digital / Analog) (HDCP Compatible)
(VGA) HDB15 Terminal X 1 (In / Out switcheable)
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
USB Series B receptacle x 1
Mini Jack (stereo) x 1 (Variable)
Audio
Internal Audio Amp
Built-in Speaker
1.0W RMS
1 speaker, ø1.1" (28mm)
Power
Voltage and Power Consumption
AC 100 ~ 120 V (3.6 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada)
AC 200 ~ 240 V (1.8 A Max. Ampere), 50 / 60 Hz (Continental Europe)
Operating Environment
Operating Temperature
Storage Temperature
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
14 ˚F ~ 140 ˚F (-10˚C ~ 60 ˚C)
Remote Control
Battery
Operating Range
Dimensions
Net Weight
60
AA, UM3 or LR6 Type x 2
16.4’ (5m) / ±30˚
2.0” x 1.0” x 7.1” (50mm x 27mm x 181mm)
0.34 lbs (154 g) (including batteries)
Appendix
Accessories
Owner's Manual
AC Power Cord
Remote Control and Batteries
DVI-VGA Cable
USB Cable
Lens Cover with String and Screw
Soft Carrying Bag
PIN Code Label
Appendix
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of
the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
● The On-Screen Menu and figures in this manual may differ slightly from the product.
Optional Parts
The parts listed below are optionally available. When ordering those parts, give the item name and Model No. to the sales
dealer.
Model No.
DVI Cable
: KA-DV20
COMPONENT-VGA Cable
: POA-CA-COMPVGA
SCART-VGA Cable
: POA-CA-SCART
(This cable is used for RGB Scart 21-Pin
Video output of video equipment.)
Multi Card Director
: MCD-100
Compact Flash Card
: CA-10
Wired LAN Card
: CA-20
Wireless LAN Card
: CA-30
When using the Wired or Wireless LAN Card, set the following name in the PJ Controller operation.
Model Name: 08-4-1
61
Appendix
Configurations of Terminals
COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : HDB15-PIN
4
5
10
15
14
2
3
9
8
13
1
7
12
6
11
1
2
3
4
5
6
7
8
Red (R/Cr) Input / Output
Green (G/Y) Input / Output
Blue (B/Cb) Input / Output
----Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
C1
C2
C3
C4
C5
Analog Red Input
Analog Green Input
Analog Blue Input
Analog Horiz. sync
Analog Ground (R/G/B)
1
2
3
4
5
6
7
8
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
Analog Vert. sync
1
2
3
4
5
6
7
8
Serial
RXD
--------GND
RTS / CTS
TXD
GND
GND
1
2
3
4
Vcc
- Data
+ Data
Ground
9
10
11
12
13
14
15
----Ground (Vert.sync.)
Ground / --------Horiz. sync. Input/Output (Composite H/V sync.)
Vert. sync.
-----
DVI-I TERMINAL (DIGITAL/ANALOG)
Terminal : DVI-I
C1 C2
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
C3 C4
C5
SERVICE PORT CONNECTOR
Terminal : Mini DIN 8-PIN
8
5
7 6
4 3
2 1
USB CONNECTOR (Series B)
62
2
1
3
4
9
10
11
12
13
14
15
16
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
17
18
19
20
21
22
23
24
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the
number and unable to operate the projector, contact the service station.
PIN Code Lock No.
Factory default set No: 1 2 3 4*
Appendix
Logo PIN Code Lock No.
Factory default set No: 4 3 2 1*
*Should the four-digit number be
changed, the factory set number will
be invalid.
While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
63
A-key to better communications
U.S.A.
Canada
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel : 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : [email protected]
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel : 06126-9371-0
Fax : 06126-9371-14
E-Mail : [email protected]
Eastern Europe
EIKI CZECH spol. s.r.o.
Umelecká 15
170 00 Praha 7
Czech Republic
Tel : +42 02 20570024
+42 02 20571413
Fax : +42 02 20571411
E-Mail : [email protected]
ˆ
Deutschland & Österreich
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
E-Mail : [email protected]
WorldWide Website http://www.eiki.com
Printed in Japan
Part No. 610 315 0642 (1AA6P1P4542-- MT7B)
© 2004 Eiki International, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement