Samsung SGH-Z400 User`s guide

Samsung SGH-Z400 User`s guide
SGH-Z400
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Switch off the phone when refuelling
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Use of any unauthorised accessories could damage
you or your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening to
a headset can damage your hearing.
Emergency calls
Qualified service
Key in the emergency number for your present
location, then press
.
Only qualified service personnel may repair your
phone.
Keep your phone away from small children
For more detailed safety information, see "Health
and safety information" on page 83.
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Important safety precautions
Be aware of special regulations
1
About this Guide
•
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent
information regarding safety or phone
features.
Indicates that you can get more
information on the referenced page.
→
Indicates that you need to press the
Navigation keys to scroll to the
specified option and then select it.
[
]
< >
2
Indicates a key on the phone. For
example, [ ]
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <Contacts>
3G
Your phone is capable of
operating in a 3G environment,
allowing much greater data
transfer speed, video streaming,
and video conferencing.
Special features of your phone
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
•
Media player
Play media files on your phone.
You can enjoy high quality videos
and music.
•
•
•
Web browser
Access the wireless web to get
up-to-the-minute information and
a wide variety of media content.
Get personal with photo caller
ID
See who’s calling you with their
very own photo displays.
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others,
use this convenient electronic
name card.
•
Multimedia message service (MMS)
Send and receive MMS messages with a
combination of text, images, video and audio.
•
E-mail
Send and receive e-mails with image, video, and
audio attachments.
•
Java game
Enjoy Java™-based embedded
games and download new games.
•
Organiser
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
3
Special features of your phone
•
Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology.
Contents
Unpack
6
Make sure you have each item
Your phone
6
Keys, features, and locations
7
First steps to operating your phone
23
Call functions
25
Advanced calling features
Install and charge the phone.............................. 7
Power on or off ................................................ 8
Keys and display .............................................. 9
Access menu functions .................................... 11
Customise your phone..................................... 12
Make/Answer calls .......................................... 14
14
Begin with your camera, the media player, the web, and
other special features
Use the camera ..............................................
Play media files ..............................................
Browse the web..............................................
Use Contacts .................................................
4
Enter text
18
20
20
21
22
ABC, T9, Number, and Symbol modes
Get started
Step outside the phone
Send messages .............................................
View messages ..............................................
Use Bluetooth................................................
Use a memory card ........................................
Switch applications.........................................
14
15
16
17
Menu functions
29
All menu options listed
Solve problems
81
Help and personal needs
Health and safety information
83
Index
88
Overview of menu functions
To access Menu mode, press [Centre] in Idle mode.
1 Call log
p. 29
4 Internet
p. 40
7 Organiser
p. 62
1
2
3
4
5
6
7
8
p. 29
p. 29
p. 29
p. 29
p. 29
p. 30
p. 30
p. 30
1
2
3
4
5
6
7
p. 40
p. 41
p. 41
p. 41
p. 42
p. 42
p. 42
1
2
3
4
5
6
7
8
9
0
p. 62
p. 62
p. 64
p. 64
p. 65
p. 65
p. 65
p. 65
p. 65
p. 65
Missed calls
Dialled calls
Received calls
Current contacts
Delete all
Data calls
Calls cost*
Calls time
2 Contacts
p. 31
1
2
3
4
5
6
7
8
9
0
p. 31
p. 32
p. 33
p. 33
p. 34
p. 34
p. 34
p. 34
p. 34
p. 34
Search contact
New contact
Groups
Speed dial
My name card
Copy all
Own number
Service number*
Settings
Memory status
3 Applications
p. 35
1
2
3
4
5
6
p. 35
p. 35
p. 37
p. 38
p. 39
p. 39
SAT*
Media player
Voice recorder
World clock
Calculator
Converter
Go to homepage
Enter URL
Bookmarks
Saved pages
History
Advanced
Browser settings
5 Messages
p. 42
1
2
3
4
5
6
7
8
9
0
*
#
Create new
Inbox
Drafts
Outbox
Sent box
Email inbox
Media Album**
Templates
Broadcast
Delete all
Settings
Memory status
p. 42
p. 46
p. 48
p. 48
p. 48
p. 48
p. 49
p. 49
p. 50
p. 50
p. 51
p. 54
6 File manager
p. 55
Images
Videos
Music
Sounds
Games & More
Other files
Memory card***
p. 55
p. 57
p. 57
p. 58
p. 59
p. 60
p. 61
Alarms
Calendar
Week view
Today’s events
Schedule
Anniversary
Task
Memo
Missed event alarm
Memory status
8 Camera
p. 65
9 Settings
p. 70
1
2
3
4
5
6
7
8
9
0
*
p. 70
p. 70
p. 71
p. 72
p. 73
p. 75
p. 78
p. 79
p. 80
p. 80
p. 81
Profiles
Time & date
Phone
Display
Call
Connectivity
Application settings
Security
Memory status
Operator settings
Reset settings
* Shows only if supported by your USIM/SIM
card.
** Shows only if supported by your service
provider.
*** Shows only if a memory card is inserted.
5
Unpack
Your phone
Make sure you have each item
Keys, features, and locations
Rear camera
lens
Phone
Travel Adapter
Front camera
lens
Earpiece
Display
Battery
PC Data Cable
Navigation keys
(Left/Right/Up/
Down)
Left soft key
Volume keys
PC Link CD
User’s Guide
You can obtain various accessories
from your local Samsung dealer.
The items supplied with your
phone and the accessories at
your Samsung dealer may vary,
depending on your country or
service provider.
6
Dial key
Memory card
slot
Alphanumeric
keys
Special
function keys
Camera/Video
call key
Application
switch key
Headset jack/
Adapter jack
Menu access/
Confirm key
(Centre)
Right soft key
Power on/off/
Menu exit key
Delete key
Microphone
Get started
Install the battery.
First steps to operating your phone
Plug the travel
adapter into the
phone.
USIM/SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your PIN, and available optional services. For 3G
services, you can purchase a USIM (Universal
Subscriber Identity Module) card.
Install and charge the phone
Remove the battery.
Plug the adapter into a standard AC wall outlet.
Insert the USIM/SIM
card.
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
If the phone is already
on, first turn it off by
pressing and holding
[ ].
Make sure that the goldcoloured contacts on the
card are face down.
7
Get started
Remove the adapter from the phone.
Power on or off
Switch on
1. Open the phone.
2. Press and hold [
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
Do not switch on
the phone when
mobile phone use
is prohibited.
Switch off
3. If necessary, enter the PIN
and press <Confirm>.
1. Open the phone.
2. Press and hold [
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
].
].
Keypad lock
When you close the phone, the keypad lock feature
locks the exposed keys so that nothing will happen if
the keys are accidentally pressed.
To unlock the keypad, press <Unlock> and then
<OK>.
8
Keys and display
Keys
Perform the function indicated on the
bottom line of the display.
In Idle mode, access Menu mode.
In Menu mode, select a highlighted
menu option or confirm input.
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or received.
Delete characters from the display or
items in an application.
Press and hold to switch the phone on
or off.
End a call.
In Menu mode, cancel input and return
the phone to Idle mode.
Get started
In Idle mode, access your favourite
menus directly.p. 71
In Menu mode, scroll through menu
options.
Enter numbers, letters, and some
special characters.
In Idle mode, press and hold [1] to
access your voicemail server. Press and
hold [0] to enter an international call
prefix.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate the Silent profile.
Press and hold [ ] to enter a pause
between numbers.
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the key tone volume. With the
phone closed, press and hold to turn
on the display.
In Idle mode, press and hold to turn on
the camera, or make a video call,
depending on the Camera key setting.
p. 71
In Camera mode, switch the camera
lens.
In the dialling screen, make a video
call.
Open the application switch window to
access other applications without
exiting the current application.
9
Get started
Display
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Msg.
Icons
*
Contacts
Soft key function
indicators
show the current
functions assigned to
the soft keys.
Video call in progress
Out of your service area; you
cannot send or receive video
calls
Memory card inserted
p. 21
Bluetooth active; When
transferring data, this icon
blinks red and bluep. 75
Received signal strength
Accessing services in a 2.5G
(GPRS) network; when
transferring data, this icon
animates
Connected with PC via USB
port
Accessing services in an
EDGE network; when
transferring data, this icon
animates
Connected to secured web
page
Accessing services in a 3G
(UMTS) network; when
transferring data, this icon
animates
Roaming network
Voice call in progress
10
Out of your service area; you
cannot send or receive voice
calls
Browsing Internet on PC
using the phone as modem
New message:
•
•
•
•
•
•
: SMS
: MMS
: E-mail
: Voicemail
: Push
: Configuration
message
* Depending on your country or service provider, the icons
shown on the display may vary.
Access menu functions
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current
role.
Select
Get started
Inbox full:
•
: SMS
•
: MMS
•
: E-mail
•
: Voicemail
•
: Configuration
message
Profile settingp. 70
•
: Normal
•
: Meeting
•
: Car
•
: Silent
•
: Outdoor
•
: Offline
Battery power level
Back
Press the left soft Press the right soft
key to select the
key to return to
highlighted option. the previous menu
level.
11
Get started
Customise your phone
Select an
option
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select> or [Centre]
to confirm the function
displayed or option
highlighted.
4. To exit, choose either of the
following methods:
• Press <Back> to move
up one level.
• Press [ ] to return to
Idle mode.
Use shortcuts
Press the number key
corresponding to the option you
want.
Display
language
1. In Idle mode, press [Centre]
and select Settings → Phone
→ Language → Screen text.
2. Select a language.
3. Press <Save>.
Call ringer
melody
You can change the call ringer by
changing the properties of the
currently active sound profile.
To change the profile properties:
1. In Idle mode, press [Centre]
and select Settings →
Profiles.
2. Scroll to the sound profile you
are using.
3. Press <Options> and select
Edit.
4. Select Voice call ringtone
and select a ringtone for
voice calls.
5. Select Video call ringtone
and select a ringtone for
video calls.
6. Press <Options> and select
Save.
12
To change the sound profile:
1. In Idle mode, press [Centre]
and select Settings →
Profiles.
2. Select the profile you want.
You can set wallpaper for the idle
screen.
1. In Idle mode, press [Centre]
and select Settings →
Display → Wallpaper.
2. Select Images.
3. Scroll to an image folder.
4. Select an image.
5. Press <Set>.
Menu
shortcuts
You can set the Navigation keys
to function as shortcuts to access
your favourite menus.
1. In Idle mode, press [Centre]
and select Settings →
Phone → Shortcuts.
2. Select a key.
3. Select a menu to be assigned
to the key.
Phone lock
You can activate the Silent profile
to avoid disturbing other people.
Press and hold [ ] in Idle mode.
You can protect the phone
against unauthorised use with a
phone password. The phone will
require the password on
power-up.
Get started
Idle mode
wallpaper
Silent profile
1. In Idle mode, press [Centre]
and select Settings →
Security → Change phone
password.
2. Enter the default password,
00000000, and press
<Confirm>.
3. Enter a new 4- to 8-digit
password and press
<Confirm>.
4. Enter the new password
again and press <Confirm>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<Confirm>.
13
Make/Answer calls
Make a call
Step outside the phone
Begin with your camera, the media player, the web, and
other special features
To make a voice call:
1. Enter an area code and
phone number.
2. Press [
Use the camera
].
3. To end the call, press [
].
Take a photo
To make a video call:
1. Enter an area code and
phone number.
2. Press [
Answer a call
Adjust the
volume during
a call
2. In Idle mode, press [Centre]
and select Camera to turn on
the camera.
3. Press [
] to switch
between the front camera
lens and rear camera lens.
].
3. To end the call, press [
1. Open the phone.
].
1. When the phone rings,
press [ ].
4. Aim the lens at the subject
and make any desired
adjustments.
2. For a video call, press
<Show me> to allow the
other person to see you.
5. Press [Centre] to take a
photo. The photo is saved
automatically.
3. To end the call, press [
6. Press <
photo.
Press [
/
].
].
View a photo
> to take another
1. In Idle mode, press [Centre]
and select File manager →
Images.
2. Select the photo you want
from the Pictures folder.
14
Record a video 1. In Idle mode, press [Centre]
and select Camera to turn on
the camera.
2. Press [1] to switch to Record
mode.
Play media files
Use these methods:
• Download from the wireless
webp. 40
• Download from a computer
using the optional Samsung
PC Studio Samsung PC
Studio User’s Guide
• Receive via Bluetooth
p. 75
• Copy to a memory card and
insert the card into the
phone p. 21
Create a play
list
1. In Idle mode, press [Centre]
and select Applications →
Media player.
3. Press [
] to switch
between the front camera
lens and rear camera lens.
4. Press [Centre] to start
recording.
5. Press [Centre] to stop
recording. The video is saved
automatically.
6. Press <Back> to record
another video.
Play a video
1. In Idle mode, press [Centre]
and select File manager →
Videos.
2. Select the video you want
from the Videos folder.
Step outside the phone
Copy media
files to the
phone
2. Press [Centre].
3. Press <Options> and select
Add → Folder or Files.
4. Scroll to the folder you want
or press [Centre] to select the
files you want.
5. Press <Select> or <Add>.
15
Step outside the phone
Play media files 1. From the media player
screen, press [Centre].
2. Select the file you want.
3. During playback, use the
following keys:
• Centre: pauses or
resumes playback.
• Up: accesses the play list.
• Left: returns to the
previous file. Moves
backward in a file when
held down.
• Right: skips to the next
file. Skips forward in a file
when held down.
•
/ : adjusts the
volume.
4. Press [Down] to stop
playback.
16
Browse the web
Using a built-in web browser, you can easily access
the wireless web to get a variety of up-to-date
services and information and to download web
content.
Launch the
web browser
In Idle mode, press [Centre] and
select Internet → Go to
homepage.
Navigate the
web
•
•
•
•
To scroll through browser
items, press [Up] or [Down].
To select an item, press
[Centre] or <Select>.
To return to the previous
page, press <Back>.
To access options, press
<Options>.
Use Contacts
Add a contact
3. Specify contact information:
Name, Phone number, Group
(for USIM), and Location
number.
To the phone’s memory:
1. In Idle mode, enter a phone
number and press
<Options>.
2. Select Save to Contacts →
Phone → New → a number
type.
3. Specify contact information:
First name, Last name, Phone
number, Work Email, Home
Email, Group, Homepage,
Birthday, and More
information (Job title,
Department, Company,
Nickname, and Notes).
4. Press <Options> and select
Save to save the contact.
Find a contact
1. In Idle mode, press [Centre]
and select Contacts →
Search Contact.
2. Enter the first few letters of
the name you want.
Step outside the phone
4. Press <Save>, or press
<Options> and select Save
to save the contact.
3. Select a contact.
4. Scroll to a number and press
[ ] to dial, or press [Centre]
to edit contact information.
To the USIM/SIM card:
1. In Idle mode, enter a phone
number and press
<Options>.
2. Select Save to Contacts →
SIM → New.
17
Step outside the phone
Create and
send your
name card
1. In Idle mode, press [Centre]
and select Contacts → My
name card.
2. Specify your contact
information.
3. Press <Options> and select
Save to save the name card.
4. To send the name card,
access the My name card
menu again.
5. Press <Options> and select
Send name card → a
sending method.
Send messages
1. In Idle mode, press [Centre]
Send a text
and select Messages →
message (SMS)
Create new → Text
message.
2. Enter the message text and
press [Centre].
3. Enter destination numbers.
4. Press [Centre] to send the
message.
18
Send a
multimedia
message
(MMS)
1. In Idle mode, press [Centre]
and select Messages →
Create new → Multimedia
message.
2. Enter the message subject.
3. Select Text.
4. Enter the message text and
press [Centre].
5. Select Picture or Video or
Audio.
6. Add an image, a video clip, or
a sound clip.
7. Press [Centre].
8. Enter destination numbers or
e-mail addresses.
9. Press [Centre] to send the
message.
Send files by
MMS
1. In Idle mode, press [Centre]
and select Messages →
Create new → File
messenger.
Send an e-mail 1. In Idle mode, press [Centre]
and select Messages →
Create new → Email.
2. Enter the e-mail subject.
3. Move to the Message field.
3. Move to the Message field.
4. Enter the e-mail text.
4. Enter the message text.
5. Move to the Attach files line.
5. Move to the Attach files line.
6. Press <Options> and select
Add files, Add name card,
or Add v-calendar.
6. Press <Options> and select
Add files, Add name card,
or Add v-calendar.
7. Add images, videos, sounds,
name cards, calendar data, or
tasks.
7. Add images, videos, sounds,
name cards, calendar data, or
tasks.
Step outside the phone
2. Enter the message subject.
8. Press [Centre].
8. Press [Centre].
9. Enter e-mail addresses.
9. Enter destination numbers or
e-mail addresses.
10. Press [Centre] to send the
e-mail.
10. Press [Centre] to send the
message.
19
Step outside the phone
View messages
View a text
message
When a notification appears:
1. Press <View>.
2. Press <Options> and select
Download to download new
e-mails or headers.
From the Inbox:
3. Select an e-mail or header.
1. In Idle mode, press [Centre]
and select Messages →
Inbox.
4. If you selected a header,
press <Options> and select
Retrieve to view the body of
the e-mail.
When a notification appears:
1. Press <View>.
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press [Centre]
and select Messages →
Inbox.
2. Select an MMS message
(
).
20
1. In Idle mode, press [Centre]
and select Messages →
Email inbox.
2. Select the message from the
Inbox.
2. Select an SMS message
(
).
View a
multimedia
message
View an e-mail
Use Bluetooth
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to
other Bluetooth devices and exchange data with
them, talk hands-free, or control the phone
remotely.
Turn on
Bluetooth
1. In Idle mode, press [Centre]
and select Settings →
Connectivity → Bluetooth
→ Activation → On.
2. Select My phone’s visibility
→ On to allow other devices
to find your phone.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press [Centre]
and select Settings →
Connectivity → Bluetooth
→ My devices → Search
new device.
Receive data
Send data
1. Access an application,
Contacts, File manager, or
Calendar.
Use a memory card
You can use an optional microSD memory card to
increase your phone’s memory capacity.
Important
memory card
information
•
•
2. Select the item you want to
send.
3. Press <Options> and select
Send name card/Send/
Send schedule/Send task
→ Via bluetooth.
•
•
4. Select Search new device.
5. Select a device.
6. If necessary, enter the
Bluetooth PIN and press
<OK>.
•
•
Frequent erasing and writing
will shorten a card’s lifespan.
Do not remove a card from the
phone or turn off the phone
while data is being accessed or
transferred. This could result in
loss of data and/or damage to
the card or phone.
Do not subject cards to strong
shocks.
Do not touch card terminals
with your fingers or metal
objects. If dirty, wipe the card
with a soft cloth.
Keep cards away from small
children or pets.
Do not expose cards in a place
subject to electro-static
discharge and/or electrical
noise.
Step outside the phone
2. If necessary, press <Yes> to
confirm that you are willing to
receive.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN,
if it has, and press <OK>.
When the owner of the other
device enters the same code,
pairing is complete.
1. When a device attempts to
access your phone, press
<Yes> to permit the
connection.
21
Step outside the phone
Insert a
memory card
1. Slide the card into the card
slot, with the label side face
up.
Switch applications
You can switch to other applications from a menu,
without closing the menu screen you were using.
Switch to an
application
Available
applications
2. Press the card until it locks
into place.
Remove the
memory card
Use a card
adapter
1. Press the card so that it is
disengaged from the phone.
2. Slide the card out of the slot.
Using a card adapter and a USB
card reader/writer, you can read
the card on a PC.
1. Insert a memory card into a card
adapter, and then the adapter
into a card reader/writer.
2. Plug the USB connecter of the
card reader/writer into the USB
port on your PC.
22
3. Access the appropriate memory
disk and copy to and from the
card.
Close all
running
applications
1. While using a menu, press
[ ].
2. Select an application.
• Call: opens the dialling
screen.
• Messages: accesses the
Messages menu.
• Internet: launches the web
browser.
1. Press [
].
2. Scroll to End all?
3. Press <Yes>.
Enter text
ABC, T9, Number, and Symbol modes
You can enter text in some features such as
Messages, Contacts, or Calendar, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9 (
)
and ABC (
) modes.
Press [ ] to change case or to switch to Number
mode (
).
Press and hold [ ] to switch to Symbol mode
(
).
Using T9 mode
T9 is a predictive text input mode that allows you to
enter any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Other T9 mode operations
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the entire display.
Adding a new word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your
key presses. When there are no more alternative
words, Spell displays on the bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <Add>.
23
Enter text
Using ABC mode
Using Number mode
Press the appropriate key until the character you
want appears on the display.
Number mode enables you to enter numbers. Press
the keys corresponding to the digits you want.
Key
Characters in order displayed
Upper case
Lower case
(creating an SMS message with GSM alphabet encoding)
Other ABC mode operations
•
•
•
•
24
To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the entire display.
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the symbols
[C].
insert the symbols
<OK>.
You can also use the speed dial feature to assign
your most frequently dialled numbers to specific
number keys.p. 33
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
• Press [C] to clear the last digit or press and
hold [C] to clear the whole display.
• Press and hold [ ] to enter a pause
between numbers.
2. Press [ ].
3. When you want to end the call, press [
].
Making an international call
1. In Idle mode, press and hold [0]. The +
character appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Contacts
Once you have stored a number in Contacts, you can
dial the number by selecting it from Contacts.
p. 31
You can quickly dial a number from the USIM/SIM
card using its location number assigned when
stored.
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Scroll through other numbers, if necessary.
3. Press <Call> or [ ] to make a voice call, or
] to make a video call.
<V-Call> or [
Answering a call
When you receive a call, the phone rings and
displays the incoming call image.
Press <Accept> or [
] to answer the call.
Tips for answering a call
•
•
•
•
When Anykey answer is active, you can press
any key, except for <Reject> and [ ].p. 71
When Slide up in Slide settings is set to
Accept call, you can simply open the phone.
p. 71
Press <Reject> or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute
the ringer, depending on the Volume key
setting.p. 72
25
Call functions
Viewing missed calls
Placing a call on hold/Retrieving
When you have missed calls, the screen displays
how many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Press <Hold> to place a call on hold, or press
<Unhold> to retrieve the call.
Using the headset
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the right side of
the phone. The button on the headset works as
follows:
To
Press
redial the last call
the button twice.
answer a call
the button.
end a call
and hold the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [
call.
/
] to adjust the earpiece volume during a
Press [ ] to increase the volume level and press
[ ] to decrease the volume level.
26
Making a second call
You can make another call if your network supports
this function.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select Drop → Drop held
call to end the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on
the phone, if your network supports this function
and you have activated the call waiting feature.
p. 74
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select Drop → Drop held
call to end the call on hold.
4. To end the current call, press [ ].
Using the speakerphone feature
Use your phone as a speakerphone to talk and listen
with the phone a short distance away.
Press [Centre] and then <Yes> to activate the
speakerphone feature. Press [Centre] again to
switch back to the earpiece.
Press <Options> to access the following options
during a call:
• Loudspeaker/Loudspeaker off: turn on the
speakerphone feature or switch back to Normal
mode.
• Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or hands-free car
kit, or back to the phone.
• Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
• Split: have a private conversation with one
multi-party call participant. The other
participants can converse with each other. After
the private conversation, select Join to return
both private participants to the multi-party call.
• Drop: access the following options:
Drop call: disconnect one of the multi-party call
participants.
Drop active call: disconnect the active call.
Drop held call: disconnect the call currently on
hold.
•
•
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
Mute/Unmute: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
Mute key tone/Unmute key tone: turn the
key tones off or on.
To communicate with answering machines or
computerised telephone systems, Unmute
key tone must be selected.
•
•
•
•
•
•
•
•
Call functions
Using In-call options
•
New call: make a new voice call.
Contacts: locate or store contacts in Contacts.
Send text message: create a new SMS
message.
Send DTMF: send DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Memo: create a memo.
End call/End calls: disconnect the call currently
on hold, active call, or all calls.
Save to Contacts: save the entered number to
Contacts.
Save to memo: save the entered number to
memo.
27
Call functions
Using the video call feature
In a 3G (UMTS) service area, your phone can make
or receive a video call, allowing you to see another
person on the screen during a conversation. The
other person’s phone must support the video call
feature.
Making a video call
1. In Idle mode, enter the area code and phone
number.
2. Press [
].
•
•
•
•
•
Answering a video call
When you receive a video call, answer a video call as
receiving a voice call. Press <Show me> to allow
the caller to see you.
•
•
Using video call options
•
During a video call, press <Options> to access the
following options:
• Loudspeaker/Loudspeaker off: turn on the
speakerphone feature or switch back to Normal
mode.
• Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or hands-free car
kit, or back to the phone.
• Mute camera/Unmute camera: turn off or on
the camera.
• Mute voice/Unmute voice: turn off or on the
microphone.
28
•
•
•
•
•
Mute camera & voice/Unmute all: turn off or
on the camera and the microphone.
Mute key tone/Unmute Key tone: turn off or
on the key tones.
Zoom: display the zoom control bar and zoom in
or out by pressing [Up] or [Down].
Switch camera: switch between the front
camera lens and rear camera lens.
Brightness/Hide brightness: display the
brightness control bar and adjust the brightness
by pressing [Left] or [Right], or hide the control
bar.
Effects: change the colour tone of the image.
Hide information/Show information: hide or
display information about the video call.
Send DTMF: send Dual tone multi-frequency
(DTMF) tones as a group after entering the entire
number you need to send or retrieving a number
from Contacts.
Video quality: change the image quality of the
camera.
End call: disconnect the video call.
Save to Contacts: save the entered number to
Contacts.
Send text message: send a new SMS message.
Save to memo: save the entered number to
memo.
Menu functions
•
All menu options listed
•
Call log
•
(Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls, if your USIM/
SIM card supports this function.
To access this menu, press [Centre] in Idle mode
and select Call log.
Missed calls (Menu 1.1)
This menu displays the most recent calls you did not
answer.
Accessing a call log
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call
list.
3. Press [Centre] to view the details of a call, or
press [ ] to dial a number.
Using call log options
While viewing call details, press <Options> to
access the following options:
• Voice call: make a voice call to the number.
•
•
Video call: make a video call to the number, if
the 3G service is available.
Use number: paste the selected number to the
normal dialling screen.
Save to Contacts: save the number to
Contacts.
Send message: send a message to the selected
number via SMS, MMS, or File messenger.
Delete: delete the call log.
Dialled calls (Menu 1.2)
This menu displays the most recent calls you have
dialled.
Received calls (Menu 1.3)
This menu displays the most recent calls you have
received.
Current contacts (Menu 1.4)
This menu displays the most recent calls dialled,
received, or missed.
Delete all (Menu 1.5)
Use this menu to delete all logs in each call type.
1. Press [Centre] to select the call types to be
cleared.
2. Press <Delete>.
29
Menu functions
3. Press <Yes> to confirm the deletion.
If the phone is locked, it will require the phone
password. The password is preset to 00000000.
You can change this password.p. 79
Data calls (Menu 1.6)
Use this menu to view the total amount of sent or
received data.
• Total sent: check the total amount of data you
have sent.
• Total received: check the total amount of data
you have received.
To reset a counter or all counters, press <Options>
and select Reset or Reset all.
If the phone is locked, it will require the phone
password. The password is preset to 00000000.
You can change this password.p. 79
Calls cost (Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if supported by your USIM/
SIM card. Note that this is not intended to be used
for billing purposes.
• Total costs: check the total cost of all your
calls. If the total cost exceeds the maximum cost
set in Edit cost limit, you must reset the
counter before you can make another call.
• Last call cost: check the cost of your last call.
30
•
Max cost: check the maximum cost set.
Press <Options> to access the following options:
• Reset call cost: reset the cost counters.
• Edit cost limit: set the maximum cost
authorised for your calls.
• Setup currency: set the currency that is
applied when the cost of your call is calculated.
Calls time (Menu 1.8)
This menu displays the time log for voice and video
calls made and received. The actual time invoiced by
your service provider will vary.
Total dialled: check the total length of voice
•
calls dialled.
Total received: check the total length of
•
voice calls received.
•
Total dialled: check the total length of video
calls dialled.
Total received: check the total length of
•
video calls received.
To reset a counter or all counters, press <Options>
and select Reset or Reset all.
If the phone is locked, it will require the phone
password. The password is preset to 00000000.
You can change this password.p. 79
Contacts
(Menu 2)
You can store phone numbers on your USIM/SIM
card and in your phone’s memory. The USIM/SIM
card and phone’s memory are physically separate,
but they are used as a single entity called Contacts.
•
•
Search contact (Menu 2.1)
•
You can quickly access this menu by pressing
<Contacts> in Idle mode.
•
Finding a contact
1. Enter the first few letters of the name that you
want to find.
2. Select a contact from the list.
3. Scroll to a number, and press [ ] to dial or
press [Centre] to edit contact information.
•
•
•
Using contact options
While viewing contact details, press <Options> to
access the following options:
• Edit: edit contact information.
•
•
Contacts (Menu 2)
Use this menu to search for contact information
stored in Contacts.
Menu functions
To access this menu, press [Centre] in Idle mode
and select Contacts.
Send message: send a message to the selected
number or e-mail address via SMS, MMS, File
messenger, or e-mail.
Special options: set the following options:
Picture: assign a caller ID image to alert you to
a call from the person.
Ringtone: assign a ringtone to alert you to a call
from the person.
Msg. alert tone: select a ringtone to alert you
to an incoming message from the person.
Add to speed dial: set the selected number as
a speed dial entry.
Video call: make a video call to the number, if
the 3G service is available.
Copy to SIM/Copy to phone: copy the contact
from the phone’s memory to the USIM/SIM card,
or vice versa.
Send name card: send the contact via SMS,
e-mail, MMS, File messenger, or Bluetooth.
Print via Bluetooth: print contact information
via a Bluetooth-compatible printer. Some
printers may not be compatible with the phone.
Use number: paste the selected number to the
normal dialling screen.
Delete: delete the contact.
31
Menu functions
New contact (Menu 2.2)
Use this menu to add a new contact to Contacts.
Storing a contact in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about
the contact:
• First name/Last name: assign a name.
• Phone number: add a phone number in any
type.
• Work Email: assign a business e-mail
address.
• Home Email: assign a personal e-mail
address.
• Group: assign the contact to a caller group.
• Homepage: enter a homepage address.
• Birthday: enter the person’s birthday.
• More information: enter the job title,
department, company, nickname, and
additional note of the person.
3. Press <Options> and access the following
options to add additional information:
• Special options: assign a caller ID image,
call ringer, or message ringer for the contact.
• Add phone number: add a phone number
in any type to the contact.
• Delete phone number: remove the
selected number type from the contact.
32
Change type: change the number type from
the contact.
• Mark video call/Unmark video call: set
the selected number as a video call number,
or not.
4. Press <Options> and select Save to save the
contact.
•
Storing a contact on the USIM/SIM card
1. Select SIM.
2. Enter information about the contact:
• Name: assign a name.
• Phone number: add a phone number.
• Group: (For USIM) assign a caller group.
• Location number: enter a location number.
3. If you are using a USIM card, press <Options>
to add additional information:
• Add item: add a number type to the contact.
• Delete item: remove the selected category
from the contact.
4. Press <Save>, or press <Options> and select
Save to save the contact.
Speed dial (Menu 2.4)
Use this menu to organise your contacts in caller
groups.
Use this menu to assign speed dial numbers (2 to 9)
to 8 of your most frequently dialled numbers.
Adding members to a caller group
Assigning speed dial numbers
1. Select a group.
2. Press [Centre] to select the contacts to be
added.
3. Press <Save>.
1. Select a key location from 2 to 9. Key 1 is
reserved for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than
one number.
Managing caller groups
Managing speed dial entries
From the speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key.
• Details: check the name and number assigned
to a key.
• Video call: make a video call to the number
assigned to a key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
Contacts (Menu 2)
From the group list, press <Options> to access the
following options:
• View members: check the members of the
selected group.
• Add member: add contacts to the selected
group.
• Add group: add a new group.
• Rename group: change the group name.
• Delete group: delete the selected group. Group
members, however, will not be deleted from
Contacts.
• Delete all groups: delete all groups including
default groups.
Menu functions
Groups (Menu 2.3)
Dialling speed dial numbers
In Idle mode, press and hold the appropriate key.
33
Menu functions
My name card (Menu 2.5)
Service number (Menu 2.8)
Use this menu to create your name card and send it
to other people.
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your
USIM/SIM card supports SDN.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 32
].
Using name card options
Settings (Menu 2.9)
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send name card: send the name card via SMS,
e-mail, MMS, File messenger, or Bluetooth.
• Print via Bluetooth: print your contact
information via a Bluetooth-compatible printer.
Some printers may not be compatible with the
phone.
• Delete: delete the name card.
Use this menu to change the default settings for
Contacts entries.
• Viewing settings: change the sort order of the
contact list.
• Default storage settings: select a default
memory location for saving contacts. If you
select Optionally, the phone will ask you to
select a memory location each time you save a
number.
Copy all (Menu 2.6)
Use this menu to check the number of contacts you
have stored in the phone’s memory and on the
USIM/SIM card.
Use this menu to copy all of the contacts stored on
the USIM/SIM card to the phone’s memory, or vice
versa.
Own number (Menu 2.7)
Use this menu to check your phone numbers, or to
assign a name to each of the numbers. Changes
made here do not affect the actual subscriber
numbers on your USIM/SIM card.
34
Select the number you want and press [
Memory status (Menu 2.0)
Applications
(Menu 3)
Use this menu to play media files, to record a voice
memo, to set time zone, or to use the phone as a
calculator or converter.
To access this menu, press [Centre] in Idle mode
and select Applications.
For details, see your USIM/SIM card instructions or
contact your service provider.
Media player (Menu 3.2)
Use this menu to enjoy music and video files. First,
you need to save files to your phone’s memory or on
a memory card.
To enjoy high quality music, you can use an optional
Bluetooth stereo headset.
Normal headsets and Bluetooth mono headsets
are not compatible with the music player.
Use the following methods to save music or video
files to your phone’s memory:
• Download from the wireless webp. 40
• Download from a computer using Samsung PC
Studio Samsung PC Studio User’s Guide
• Receive via an active Bluetooth connection
p. 75
• Copy to a memory card and insert the card into
the phone p. 21
Applications (Menu 3)
This menu is available if you use a USIM/SIM card
that supports SIM Application Toolkit menus and
provides additional services, such as news, weather,
sports, entertainment, and location services.
Available services may vary, depending on your
service provider’s plans.
You can play the following types of files on your
phone:
• Music: MP3, AAC, WAV, 3GA, M4A
• Video: MP4, 3GP
Menu functions
SAT (Menu 3.1)
Downloading or receiving music or video
files
Downloaded or received files are stored in the
Dounloads folder in Music or Videos.
p. 57, p. 57
Creating the play list
1. From the media player screen, press [Centre].
2. Press <Options> and select Add → Folder or
Files.
3. Scroll to the folder you want or press [Centre] to
select the files you want.
4. Press <Select> or <Add>.
35
Menu functions
Playing media files
•
1. From the media player screen, press [Centre].
2. Select a file. The file plays.
•
During playback, use the following keys:
Key
Function
Centre
Pauses or resumes playback.
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward in a
file when held down.
Up
/
Down
Accesses the play list.
Adjusts the volume.
•
•
•
•
•
Stops playback.
Using Media player options
While playing a file, press <Options> to access the
following options:
• Pause/Resume: pause or resume playback.
• Stop: stop playback.
• Transfer to Bluetooth stereo headset/
Transfer to phone: switch the sound output to
a Bluetooth stereo headset or phone speaker.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Open play list: access the play list.
36
•
•
Activate key: get a new licence key when the
key for the selected DRM file expires.
Reactive key: get another licence key even
when the key for the selected DRM file has not
expired.
Go to File Manager: go to the Music and
Videos folders.
Hidden from Bluetooth/Visible to Bluetooth:
hide the file so that other Bluetooth devices
cannot access it, or share the file with other
Bluetooth devices.
Show controller/Hide controller: display or
hide the controller image.
Details: access the file properties.
Player settings: change the default settings for
playing media files:
Play options: select a repeat mode.
Volume: select a volume level.
Controller: display or hide the controller image.
Audio player skin: select a skin image.
VOD settings: select a connection profile to be
used for accessing a video streaming server. You
can also create or edit a profile.p. 77
Key management: manage licence keys you
have acquired.
Accessing the play list
Playing a voice memo
From the media player screen, press [Up].
1. From the voice recorder screen, press
<Options> and select Go to sounds.
2. Select a voice memo from the Voice memos
folder. The memo plays.
Use this menu to record voice memos. A voice
memo can be up to one hour long.
Recording a voice memo
1. Press [Centre] to start recording.
2. Speak into the microphone.
Press [Centre] to pause or resume the recording.
3. Press <Stop> or [Down]. The voice memo is
automatically saved.
4. Press [Centre] to review the memo, or press
[Up] to record additional memos.
Key
Function
Centre
Pauses or resumes playback.
Left
Moves backward in a file.
Right
Skips forward in a file.
/
Adjusts the volume.
Down
Stops playback.
Up
Switches to Review mode (
to Record mode ( ).
Applications (Menu 3)
Voice recorder (Menu 3.3)
During playback, use the following keys:
Menu functions
Press <Options> to access the following options:
• Play via: play the selected music file via the
phone speaker or a Bluetooth stereo headset.
• Play: play the selected video clip.
• Add: add files to the play list.
• Remove: remove the selected file or all files
from the current play list.
• Move: move the selected file to the position you
want within the current play list or to another
play list.
• Copy: make a copy of the selected file in the
current play list or to another play list.
• New list: add a new play list.
) or back
Using Voice recorder options
After playback, press <Options> to access the
following options:
• Play: play the selected voice memo in Review
mode.
• Record: record a new voice memo.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Set as ringtone: set the file as your ringtone
for voice calls or video calls.
37
Menu functions
•
•
•
•
•
•
•
•
•
•
38
Set as caller ID: set the file as a ringtone for a
Contacts entry.
Activate key: get a new licence key when the
key for the selected DRM file expires.
Reactive key: get another licence key even
when the key for the selected DRM file has not
expired.
Go to sounds: access the voice memo list.
Delete: delete the file.
Rename: change the file name.
Hidden from Bluetooth/Visible to Bluetooth:
hide the file so that other Bluetooth devices
cannot access it, or share the file with other
Bluetooth devices.
Details: access the file properties.
Record settings: customise the default settings
for the voice recorder:
Default name: change the default prefix of file
names.
Recording time: select a maximum recording
time.
Key management: manage licence keys you
have acquired.
World clock (Menu 3.4)
Use this menu to set your local time zone and find
out the current time in another part of the world.
Setting the local time zone
1. From the world map, press [Left] or [Right] to
scroll to the city you want on the upper line ( ).
As the time line moves, the time and date of the
given zone display.
2. Press [Centre] to save the city as your local time
zone.
Viewing world time
1. From the world map, move to the lower line
( ).
2. Press [Left] or [Right] to scroll to the city you
want.
3. Press [Centre] to save the time zone.
Applying daylight saving time
1. From the world map, press <Options> and
select Summer time.
2. Press [Centre] to select the time zones you
want.
3. Press <Select>.
4. Press [Centre] to save the time zone.
Calculator (Menu 3.5)
Converter (Menu 3.6)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
Use this menu for common conversions, such as
currency and temperature.
Performing a calculation
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press
[Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
Press <Options> to access the following options:
• Equal: view the result.
• Recent calculation: display the last result you
calculated.
• Save to memory: save a value into the
calculator memory.
• Recall memory: retrieve the saved value.
• Clear memory: clear the saved value.
Applications (Menu 3)
Using calculator options
Menu functions
1. Enter the first number.
Press [ ] to include a decimal point.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [Centre] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Performing a conversion
Using converter options
Press <Options> to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: display the currency rate list.
39
Menu functions
Internet
•
(Menu 4)
The web browser on your phone allows you to
access the wireless web. Using the web browser, you
can access up-to-date information and a wide
variety of media contents, such as wallpapers,
ringtones, and music files.
Go to homepage (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider.
Navigating the web browser
To
Press
scroll through browser items
[Up] or [Down].
select a browser item
[Centre] or
<Select>.
return to the previous page
<Back>.
Using page options
From any web page, press <Options> to access the
following options:
• Go to: go to the currently linked web page.
• Go: move backward or forward through pages in
history.
• Reload: reload the current page with updated
information.
40
•
•
•
•
•
•
•
•
•
•
Desktop view/Smart-fit view: change the
display mode of the browser.
Page size: change the page size.
Go to homepage: return to the homepage.
Add to Bookmarks: bookmark the current
page.
View bookmarks: access the bookmark list.
Enter URL: enter a URL address manually.
Copy URL: send the URL of the current page via
SMS, MMS, or e-mail.
Save: save the image of the current web page or
the current page.
Saved pages: access the list of web pages you
have saved.
History: access the list of web pages you have
accessed.
Advanced: change the various settings for the
browser.
Clear cache: clear the cache. The cache is a
temporary memory site that stores recently
accessed web pages.
Empty cookies: delete cookies. Cookies are
pieces of personal information sent to a web
server while navigating the web.
Cookie options: set whether or not cookies are
stored. If you select Prompt, the phone will ask
you to save the cookies of the current page.
Exiting the web browser
Enter URL (Menu 4.2)
Use this menu to manually enter a URL address and
access the associated web page.
You can add the entered URL to the Bookmark list by
selecting Add bookmark.
Bookmarks (Menu 4.3)
Use this menu to save URL addresses in order to
quickly access web pages, or access the preset
bookmarks.
Adding a new bookmark
1. Press <Options> and select Add bookmark.
2. Enter a name for the item and press [Down].
3. Enter a URL address and press <Save>.
Selecting a bookmark item launches the web
browser and accesses the associated web page.
Using bookmark options
From the bookmark list, press <Options> to access
the following options:
• Go to: access the bookmarked web page.
• Enter URL: enter a URL address manually.
• Edit bookmark: edit the selected bookmark.
• Add bookmark: add a new bookmark.
• Copy URL: send the URL of the bookmark via
SMS, MMS, or e-mail.
• Delete: delete the selected bookmark or all
bookmarks.
Internet (Menu 4)
Press [ ] to end the network connection and exit
the browser.
Accessing a bookmarked page
Menu functions
Preferences: change the settings for the web
browser to suit your preference.
Certificates: access the web browser
certificate.
Page details: access the page properties.
Browser settings: select a connection profile to
be used for connecting to the Internet. You can
also create or edit a profile.p. 77
About browser: access version and copyright
information about the browser.
Saved pages (Menu 4.4)
You can access the list of pages you have saved the
images of the web page or the web page.
Select a name from the list to access the
corresponding web page.
From the saved page list, press <Options> to
access the following options.
• View: access the selected web page.
• Rename: change the saved page name.
• Delete: delete the selected web page or all
pages.
41
Menu functions
History (Menu 4.5)
Browser settings (Menu 4.7)
You can access the list of pages you have accessed
recently.
Use this menu to select a connection profile to be
used for connecting to the Internet. You can also
create or edit a profile.p. 77
Select a URL from the list to access the
corresponding web page.
From the history list, press <Options> to access
the following options:
• Go to: access the selected web page.
• Delete: delete the selected web page or all
pages.
• Details: access the properties of the web page.
Advanced (Menu 4.6)
Use this menu to clear the cache, delete cookies or
change the browser display settings.
• Clear cache: clear the cache. The cache is a
temporary memory site that stores recently
accessed web pages.
• Empty cookies: delete cookies. Cookies are
pieces of personal information sent to a web
server while navigating the web.
• Cookie options: set whether or not cookies are
stored. If you select Prompt, the phone will ask
you to save the cookies of the current page.
• Preferences: change the settings for the web
browser to suit your preference.
• About browser: access version and copyright
information about the browser.
42
Messages
(Menu 5)
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also access push message, voice mail, broadcast
message, and configuration messages.
To access this menu, press [Centre] in Idle mode an
select Messages.
You can quickly access this menu by pressing
<Msg.> in Idle mode.
Create new (Menu 5.1)
Use this menu to create and send text messages,
multimedia messages, or e-mails. You can also send
files using MMS.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages.
Using options while composing an SMS
message
While composing a message, press <Options> to
access the following options:
• Send: send the message.
• Input method: change the text input mode.
• Input language: change the language to be
used in T9 input mode.
• Insert: insert a text template, Contacts, or
bookmarked URL address into text.
• Save to Drafts: save the message in the Drafts
folder.
Multimedia Message Service (MMS) delivers
messages containing a combination of text, image,
video, and audio, from phone to phone or from
phone to e-mail.
Creating and sending an MMS message
1. Enter the message subject.
You can use various options by pressing
<Options> in each field. next section
2. Select the Text line.
3. Enter the message text and press [Centre].
4. Select the Picture or Video or Audio line and
add an image, a video, or a sound clip.
Messages (Menu 5)
2. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
3. Press [Centre] to send the message.
Multimedia message (Menu 5.1.2)
Menu functions
Creating and sending an SMS message
1. Enter your message and press [Centre].
• The maximum number of characters allowed
in a message varies by service provider. If
your message exceeds the maximum
number of characters, the phone will split
the message.
• You can use various options by pressing
<Options>. next section
• The maximum size allowed for a message
can differ, depending on your service
provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files
may not be able to be forwarded.
5. When you have finished, press [Centre].
6. Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
7. Press [Centre] to send the message.
43
Menu functions
Using options while composing an MMS
message
While composing a message, press <Options> to
access the following options:
• Input: enter the message text.
• Add: add a media file.
• Send: send the message.
• Preview: view the message as it will be shown
on the recipient’s phone.
• Edit Text/Change file: edit the added text,
image, video, or sound clip.
• Delete text/Delete file: delete the added text,
image, video, or sound clip.
• Input method: change the text input mode.
• Input language: change the language to be
used in T9 input mode.
• Insert text template: insert a text template.
• Add contact details: attach a Contacts entry as
a name card.
• Add v-calendar: attach calendar data as a data
format attachment.
• Save to Drafts: save the message in the Drafts
folder.
• Add page: add pages. Move to each page by
pressing [Left] or [Right].
• Move page: move the current page backward or
forward to change the page order.
• Delete page: delete a page.
44
•
•
Edit style: change the page properties.
- This page: set the page duration and change
font colour and style for the selected page.
- All page: change the background colour and
page layout.
Save as template: save the message as a
template in the Multimedia templates folder.
File messenger (Menu 5.1.3)
Use this menu to send multiple media files by
attaching them to an MMS message.
Creating and sending an MMS messenge with files
1. Enter the message subject.
You can use various options by pressing
<Options> in each field.next section
2.
3.
4.
5.
6.
7.
8.
9.
Move to the Message field.
Enter the message text.
Move to the Attach files line.
Press <Options> and select Add files, Add
name card, or Add v-calendar.
Add images, videos, sounds, name cards,
calendar data, or tasks.
When you have finished, press [Centre].
Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
Press [Centre] to send the message.
Using options while composing an MMS
message with files
You can send and receive e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your
e-mail account.p. 53
You can use various options by pressing
<Options> in each field.next section
2.
3.
4.
5.
6.
7.
8.
9.
Move to the Message field.
Enter the e-mail text.
Move to the Attach files line.
Press <Options> and select Add files, Add
name card, or Add v-calendar.
Add images, videos, sounds, name cards,
calendar data, or tasks.
When you have finished, press [Centre].
Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
Press [Centre] to send the e-mail.
Messages (Menu 5)
Email (Menu 5.1.4)
You can create and send e-mails.
1. Enter the e-mail subject.
Menu functions
While composing a message, press <Options> to
access the following options:
• Send: send the message.
• Input method: change the text input mode.
• Input language: change the language to be
used in T9 input mode.
• Insert text template: insert a text template.
• Insert: insert a text template, contacts, or
bookmarked URL address into text.
• Attached file list: access the list of the files you
attached.
• Add files: attach images, videos, and sounds.
• Add name card: attach a Contacts entry as a
name card.
• Add v-calendar: attach calendar data as a data
format attachment.
• Delete all attachments: delete all
attachments.
• Save to Drafts: save the message in the Drafts
folder.
Creating and sending an e-mail
Using options while composing an e-mail
While composing an e-mail, press <Options> to
access the following options:
• Send: send the message.
• Input method: change the text input mode.
• Input language: change the language to be
used in T9 input mode.
• Insert text template: insert a text template.
• Insert: insert a text template, contacts, or
bookmarked URL address into text.
45
Menu functions
•
•
•
•
•
•
Attached file list: access the file list you
attached.
Add files: attach images, videos, and sounds.
Add name card: attach a Contacts entry as a
name card.
Add v-calendar: attach calendar data as a data
format attachment.
Delete all attachments: delete all
attachments.
Save to Drafts: save the e-mail in the Drafts
folder.
Inbox (Menu 5.2)
This folder stores all types of messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the list to show
the message type:
•
SMS message
•
MMS message
•
MMS notification
•
Configuration message, containing network
parameters from your service provider
•
USIM/SIM
46
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Using message options
While viewing a message, press <Options> to
access the following options:
SMS messages
• Call/Go to URL/Go to RTSP: dial the
highlighted phone number or access the
highlighted web link.
• Add to bookmark: save the highlighted web
link to the bookmark list.
• Create email: send an e-mail to the highlighted
e-mail address.
• Create multimedia message: send an MMS
message to the highlighted phone number or
e-mail address.
• Reply: reply to the sender via SMS, MMS, or File
messenger.
• Forward: forward the message to other people.
• Call back: dial the phone number of the sender.
• Save to Contacts: save the sender’s phone
number to Contacts. If a phone number, e-mail
address, or URL address within the message is
selected, you can save it to Contacts.
•
•
•
•
•
Save to Contacts: save the sender’s phone
number to Contacts. If a phone number, e-mail
address, or URL address within the message is
selected, you can save it to Contacts.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Delete: delete the message.
Details: access the message properties.
Push messages
• Go to URL/Go to RTSP: connect to the URL
specified in the message.
• Delete: delete the message.
Messages (Menu 5)
MMS messages
• Play: play the message.
• Call/Go to URL/Go to RTSP: dial the
highlighted phone number or access the
highlighted web link.
• Add to bookmark: save the highlighted web
link to the bookmark list.
• Create email: send an e-mail to the highlighted
e-mail address.
• Create multimedia message: send an MMS
message to the highlighted phone number or
e-mail address.
• Reply: reply to the sender via SMS, MMS, or File
messenger.
• Reply to all: send a reply to the sender and all
recipients.
• Forward: forward the message to other people.
• Call back: dial the phone number of the sender.
• Save as template: save the message as a
template in the Multimedia templates folder.
• Save files: save media items from the message
into your phone’s memory.
•
Menu functions
•
Move to SIM/Move to phone: move the
message between the phone’s memory and the
USIM/SIM card.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Delete: delete the message.
Configuration messages
• Install: apply the configuration value in the
message to the phone.
• Delete: delete the message.
Delivery reports
• Call back: dial the phone number of the
recipient.
• Save to Contacts: save the sender’s phone
number to Contacts. If a phone number, e-mail
address, or URL address within the message is
selected, you can save it to Contacts.
• Delete: delete the report.
47
Menu functions
Drafts (Menu 5.3)
This folder stores messages you have saved to send
them at a later time.
From the message list, press <Options> to access
the following options:
• View: open the selected message.
• Edit: edit the message.
• Send: send the message.
• Sort by: change the sort order of the message
list.
• Delete: delete the selected message.
• Delete all: delete all messages.
Outbox (Menu 5.4)
This folder stores messages that the phone is
attempting to send or has failed to send.
48
•
•
•
•
Sort by: change the sort order of the message
list.
Delete: delete the selected message.
Delete all: delete all messages.
Details: access the message properties.
Sent box (Menu 5.5)
This folder stores messages that you have sent.
From the message list, press <Options> to access
the following options:
• View: open the selected message.
• Forward: forward the message to other people.
• Sort by: change the sort order of the message
list.
• Delete: delete the selected message.
• Delete all: delete all messages.
The following icons on the message list indicates the
sending status:
•
Being sent
•
Failed to be sent
Email inbox (Menu 5.6)
From the message list, press <Options> to access
the following options:
• View: open the selected message.
• Send again: resend the message.
• Edit: edit the message.
• Cancel sending: cancel sending the message.
1. Press <Options> and select Download. The
phone checks the e-mail server and downloads
new e-mails.
2. Select an e-mail or a header.
3. If the e-mail has more than one page, press
[ / ] to scroll through pages one by one.
This folder stores e-mails that you have received.
Viewing received e-mails
4. Select an attached file to view or play it.
Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
Using e-mail options
•
•
•
Delete permanently: delete the selected
e-mail or all e-mails from both the phone’s
memory and the e-mail server.
Email accounts: change the active e-mail
account.
Print via Bluetooth: print the e-mail via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Details: access the e-mail properties.
Media Album (Menu 5.7)
Messages (Menu 5)
Use this menu to access the Media Album service,
with which you can organise your own online media
album, adding media content and messages via the
wireless web. This menu is only available if
supported by your service provider.
Menu functions
While viewing the e-mail or header, press
<Options> to access the following options:
• View: open the selected e-mail.
• Retrieve: retrieve the body of the selected
e-mail header from the e-mail server.
• Reply: send a reply to the sender.
• Reply to all: send a reply to the sender and all
recipients.
• Forward: forward the e-mail to other people.
• Download: download new e-mails or headers
from the e-mail server.
• Sort by: change the sort order of the e-mail list.
• Save files: save the selected file.
• Save to Contacts: save the sender’s e-mail
address or phone number to Contacts. If a phone
number, e-mail address, or URL address within
the message is selected, you can save it to
Contacts.
• Block: add the sender’s e-mail address or e-mail
subject to the Block list to reject e-mails from
that address or containing that subject.
• Delete from phone: delete the selected e-mail
or all e-mails from the phone’s memory.
•
Templates (Menu 5.8)
Use this menu to create, edit, and send text
templates and MMS templates.
Text templates (Menu 5.8.1)
You can create SMS templates with the sentences
you use frequently so that you can retrieve and
insert them when composing an SMS message.
Creating a template
1. Press <New>, or press <Options> and select
New, if one has been already stored.
2. Enter a message and press [Centre].
49
Menu functions
Using template options
From the template list, press <Options> to access
the following options:
• Send: create and send a new message using the
template via SMS, MMS, File messenger, or
e-mail.
• New: add a new template.
• Edit: edit the selected template.
• Delete: delete the selected template.
• Delete all: delete all templates.
Multimedia templates (Menu 5.8.2)
You can create MMS templates so that you can use
them in composing an MMS message.
Creating a template
1. Press <New>, or press <Options> and select
New, if one has been already stored.
2. Create a template as you would when creating
an MMS message.
3. Press <Options> and select Save as template
to save the template.
Using template options
From the template list, press <Options> to access
the following options:
• View: open the selected template.
• Send: send the selected template.
• New: add a new template.
• Edit: edit the selected template.
50
•
•
Delete: delete the template.
Delete all: delete all templates.
Broadcast (Menu 5.9)
Your phone receives broadcast messages, which are
text messages related to various topics, such as
weather forecast, traffic, and news report, from
networks. Use this menu to access received
broadcast messages.
Viewing a broadcast message
All broadcast messages are stored in the
Temporary folder and will be deleted after a period
of time. If you do not want a message to be deleted,
save it to the Archive folder. While viewing the
message, press <Options> and select Save.
Using message options
While viewing a message, press <Options> to
access the following options:
• Call/Go to URL/Go to RTSP: dial the
highlighted phone number or access the
highlighted web link.
• Create email: send an e-mail to the highlighted
e-mail address.
• Save: save the message in the Archive folder.
• Delete: delete the message.
Delete all (Menu 5.0)
Use this menu to delete all of the messages in each
message type at once.
1. Press [Centre] to select the message types you
want.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Settings (Menu 5. )
Text message (Menu 5. .1)
Multimedia message (Menu 5. .2)
You can configure default MMS settings.
• Sending options: set up the options for sending
MMS messages:
Priority: set the priority level of your messages.
Expiration: set the length of time your
messages are stored in the MMS server.
Custom time(Hour): enter the length of time
you want if you select Custom time in the
Expiration option.
Delivery: set a time delay before messages are
sent.
Custom time(Hour): enter the length of time
you want if you select Custom time in the
Delivery option.
Hide address: set your address to be hidden
from the recipient’s phone.
Request delivery report: set the network to
inform you when your messages are delivered.
Messages (Menu 5)
You can configure default SMS settings.
• Settings x: set the properties of each profile:
Centre address: store or change the number of
your SMS server.
Expiration: set the length of time your
messages are stored in the SMS server.
Default type: set the default message type. The
network can convert messages into the selected
format.
Name: enter a profile name.
• Sending settings: set up the options for
sending SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
Delivery report: set the network to inform you
when your messages are delivered.
Network selection: select CS preferred
(GSM) or PS preferred (GPRS), depending on
your network.
Menu functions
Use this menu to set up various options for using
messaging services.
Keep a copy: leave copies of your messages in
the Sent box folder after sending.
Character support: select a character encoding
type. When you select Automatic, the phone
switches the encoding type from GSM alphabet
to Unicode if you enter a unicode character. Use
of Unicode encoding will reduce the maximum
number of characters in a message to about half.
If this menu is not shown, your phone provides
the automatic character encoding by default.
51
Menu functions
•
52
Request read report: send a read-replay
request along with your messages.
Keep a copy: leave copies of your messages in
the Sent box folder after sending.
Add my name card: allow your contact
information to be attached to your messages via
File messenger.
Add signature: edit and attach your signature
to messages via File messenger.
Input signature: enter your signature.
Receiving options: set up the options for
receiving MMS messages:
Home network: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming network: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Reception within your home network or while
roaming has the following options:
- Auto download: the phone automatically
retrieves messages from the server.
- Manual: the phone receives notifications first
from the server. Use the Retrieve option to
manually download new messages.
- Restricted: (Roaming network only) the
phone receives notifications first from the
server. When you attempt to retrieve new
messages, the phone informs you of additional
charges.
•
•
•
•
- Reject: the phone rejects all messages.
Send delivery report: set the network to
inform the sender when messages are delivered
to you.
Send read report: determine whether or not
the phone sends a read-reply when an incoming
message has been read.
Reject anonymous: reject messages from
unknown senders.
Reject advertisement: reject advertisements.
MMS profiles: select a connection profile to be
used for MMS. You can also create or edit a
profile.p. 77
Message size: select a maximum size allowed
for messages. Available message size may vary,
depending on your country.
Creation mode: select an MMS creation mode.
Warning: you can create a message with any
type of content and of any size, but the phone
will inform you when the content and size exceed
the maximum.
Free: you can create a message with any type of
contents and of any size.
Restricted: you can create a message with the
type of content and size.
Slide interval: select the length of time the
display shows each page in a message.
Email (Menu 5. .3)
You can configure default e-mail settings.
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
•
•
Messages (Menu 5)
•
Menu functions
•
Sending options: set up the options for sending
e-mails:
From: set the sender name.
Sending account: select the default account.
Priority: select the priority level of e-mails.
Keep a copy: leave copies of your e-mails in the
Sent box folder after sending.
Include body when replying: set whether or
not the phone includes the original e-mail text in
a reply.
Delivery report: set the network to inform you
when your e-mails are delivered.
Add my name card: allow your contact
information to be attached to e-mails.
Add signature: attach your signature to
e-mails.
Input signature: enter your signature.
Receiving options: set up the options for
receiving e-mails:
Set download limit: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Auto polling: set the phone to automatically
check the e-mail server to retrieve e-mails at the
specified intervals.
Polling frequency: set how often the phone
checks the e-mail server for automatic polling.
Block address: specify e-mail addresses to
reject e-mails from those addresses, and
activate or deactivate mail blocking.
Block subject: specify subjects to reject e-mails
which contain those subjects you specify, and
activate or deactivate mail blocking.
Email profiles: select a network connection
profile to be used for e-mail services. You can
also create or edit a profile.p. 77
Email accounts: set up an e-mail account and
select an account to be used. Press <Options>
and select Edit to access the following options
for setting up an account:
Account name: enter a name for the currently
selected account.
SMTP server: enter the IP address or host
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Use SSL: activate the use of the SSL (Secure
Sockets Layer) protocol.
Retrieving server type: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
53
Menu functions
POP3 server/IMAP4 server: enter the IP
address or host name of the POP3 or IMAP4
server.
POP3 port/IMAP4 port: enter the POP3 or
IMAP4 port number.
Use SSL: activate the use of the SSL (Secure
Sockets Layer) protocol.
IMAP4 retrieving option: (IMAP4 protocol
only): set whether the phone retrieves only new
messages or all messages.
Retrieving option: set whether the phone
downloads e-mail headers only or the complete
e-mail.
Keep in server: leave copies of e-mails on the
e-mail server after retrieving.
My Address: set your e-mail address.
User name: enter the POP3 or IMAP4 user
name.
Password: enter the POP3 or IMAP4 password.
Use SMTP Authentication: enable SMTP
authentication, which requires the user to log in
before sending e-mails.
Same as POP3/IMAP4: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
User name: enter the SMTP user name.
Password: enter the SMTP password.
54
Voice mail (Menu 5. .4)
Use this menu to set the number of your voicemail
server.
You must store the voicemail server number
before accessing the server. Your service provider
can give you the number.
Push message (Menu 5. .5)
You can change the settings for receiving push
messages from the wireless web server.
• Receiving option: set whether or not to receive
push messages from the web server.
• Service loading: set whether or not your phone
automatically launches the web browser as a
push message comes in.
Broadcast (Menu 5. .6)
You can change the settings for receiving broadcast
messages.
• Receive: select whether or not the phone
receives broadcast messages.
• Channel: indicate the channels from which you
wish to receive broadcast messages. Please
contact your service provider for further details.
• Language: select the preferred languages in
which broadcast messages display.
Memory status (Menu 5. )
Use this menu to view the number of messages or
the amount of memory currently in use for each
message type in each folder.
File manager
(Menu 6)
Images
The File manager menu allows you to access
images, videos, music files, and sounds stored in the
phone’s memory or on a memory card.
Use this menu to access photos you have taken and
images you have downloaded, received in
messages, or imported from your computer.
To access this menu, press [Centre] in Idle mode
and select File manager.
Viewing an image
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
•
: Unforwardable item with a valid key.
•
: Unforwardable item without a valid key.
Your service provider supports only count-based or
unlimited-access DRM files.
Viewing a slide show
You can view your images as a slide show, a
sequential presentation of each image in the current
folder.
1. While viewing an image, press <Options> and
select Slide show.
The slide show begins.
2. Press <Back> to stop the slide show.
File manager (Menu 6)
As a result of the Digital Rights Management (DRM)
system, some of the media items you download
from the Internet or receive by MMS may require a
licence key to access them. You can acquire the key
from the website which owns the rights to the
content; use the Activate key option.
1. Scroll to an image folder.
2. Select an image.
Menu functions
Tips for Digital Rights Management
Editing an image
1. While viewing an image, press <Options> and
select Edit.
2. Press <Options> and edit the photo using the
following options:
• Save as: save the file as a different name.
• Resize: change the image size.
• Effects: change the colour tone or apply a
special effect to the photo.
• Adjust: adjust the brightness, contrast, or
colour balance.
• Frames: apply a decorative frame.
55
Menu functions
•
•
•
Cliparts: add an image clip to the photo.
Insert text: add text to the photo.
Rotate: rotate the photo clockwise or
counterclockwise.
• Flip: flip the photo vertically or horizontally.
• Crop: select a variously sized and shaped
section of the photo.
3. When you have finished, press <Done> or press
<Options> and select Done.
4. Press [Centre].
5. Enter a photo name and press <Save>.
Using image options
While viewing an image, press <Options> to access
the following options:
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Print via: print the file by connecting the phone
to a printer via USB or Bluetooth. Some printers
may not be compatible with the phone.
• Hidden from Bluetooth/Visible to Bluetooth:
hide the file so that other Bluetooth devices
cannot access it, or share the file with other
Bluetooth devices.
• Set as: set the image as wallpaper for the
display or a caller ID image for a Contacts entry.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
56
•
•
•
•
•
•
•
•
•
Real size: view the image in its actual size.
Press <Phone size> to fit the image to the
display.
Slide show: view all images as a slide show.
Activate key: get a new licence key when the
key for the selected DRM file expires.
Reactive key: get another licence key even
when the key for the selected DRM file has not
expired.
Edit: edit the image and save it as a different
file.
Delete: delete the file.
Rename: change the file name.
Details: access the file properties.
Key management: manage licence keys you
have acquired.
Downloading images
1. Scroll to the Downloads folder.
2. Select More pictures. You are connected to the
website preset by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
Videos
Use this menu to access video clips you have
recorded, downloaded, received in messages, or
imported from your computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
1. Scroll to a video folder.
2. Select a video clip. The media player opens.
p. 36
From the video list, press <Options> to access the
following options:
• Play: play the selected file.
• Add to play list: add the file to the play list.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Hidden from Bluetooth/Visible to Bluetooth:
hide the file so that other Bluetooth devices
cannot access it, or share the file with other
Bluetooth devices.
• Activate key: get a new licence key when the
key for the selected DRM file expires.
• Reactive key: get another licence key even
when the key for the selected DRM file has not
expired.
• Move: move the file to another folder.
•
Downloading video clips
File manager (Menu 6)
Using video options
•
•
•
Copy: copy the file to another folder.
Delete: delete the selected file or all files.
Rename: change the file name.
Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
New folder: add a new folder.
Details: access the file properties.
Memory status: access the memory
information for each folder in File manager.
Key management: manage licence keys you
have acquired.
Menu functions
Playing a video clip
•
•
•
•
1. Scroll to the Downloads folder.
2. Select More videos. You are connected to the
website preset by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
Music
This menu displays music files you have downloaded
or received in messages.
Playing a music file
Select a music file. The media player opens.p. 36
57
Menu functions
Using music options
From the music list, press <Options> to access the
following options:
• Play: play the selected file.
• Add to play list: add the file to the play list.
• Send: send the selected file via MMS, e-mail,
File messenger, or Bluetooth.
• Hidden from Bluetooth/Visible to Bluetooth:
hide the file so that other Bluetooth devices
cannot access it, or share the file with other
Bluetooth devices.
• Set as ringtone: set the file as your ringtone
for voice calls or video calls.
• Set as caller ID: set the file as a ringtone for a
Contacts entry.
• Activate key: get a new licence key when the
key for the selected DRM file expires.
• Reactive key: get another licence key even
when the key for the selected DRM file has not
expired.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
• New folder: add a new folder.
• Details: access the file properties.
58
•
•
Memory status: access the memory
information for each folder in File manager.
Key management: manage licence keys you
have acquired.
Downloading music files
1. Select More music. You are connected to the
website preset by your service provider.
2. Search for the file you want and follow the
onscreen instructions to download it.
Sounds
Use this menu to access voice memos you have
recorded, and sound clips you have downloaded,
received in messages, or imported from your
computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip.
For a voice memo, see Voice recorder.p. 37
During playback, use the following keys:
Key
Function
Left
Returns to the previous file.
Right
Skips to the next file.
Up/Down/
/
Adjusts the volume.
Centre
Allows you to send the selected file to
other people.
Using sound options
•
•
Memory status: access the memory
information for each folder in File manager.
Key management: manage licence keys you
have acquired.
Downloading sound clips
1. Scroll to the Ringtones folder.
2. Select More ringtones. You are connected to
the website preset by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
Games & More
Menu functions
File manager (Menu 6)
From a sound list, press <Options> to access the
following options:
• Play: play the selected file.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Hidden from Bluetooth/Visible to Bluetooth:
hide the file so that other Bluetooth devices
cannot access it, or share the file with other
Bluetooth devices.
• Set as ringtone: set the file as your ringtone
for voice calls or video calls.
• Set as caller ID: set the file as a ringtone for a
Contacts entry.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Activate key: get a new licence key when the
key for the selected DRM file expires.
• Reactive key: get another licence key even
when the key for the selected DRM file has not
expired.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
• New folder: add a new folder.
• Details: access the file properties.
Use this menu to access the embedded Java games
and downloaded Java applications.
Accessing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ
from game to game.
Using Java application options
From the application list, press <Options> to
access the following options:
• Play: launch the selected application.
• Activate key: get a new licence key when the
key for the selected DRM file expires.
• Reactive key: get another licence key even
when the key for the selected DRM file has not
expired.
59
Menu functions
•
•
•
•
•
•
•
•
•
Move: move the game to another folder.
Delete: delete the selected application or all
applications, or application folders.
Rename: change the name of the application or
application folder.
Lock/Unlock: lock the application to protect it
from being deleted, or unlock the application.
Details: access the application properties.
Key management: manage licence keys you
have acquired.
New folder: add a new application folder.
Network settings: select a connection profile
to be used for applications requiring network
access. You can also create or edit a profile.
p. 77
Memory status: access memory information for
each folder in File manager.
Downloading applications
1. Select More games. You are connected to the
website preset by your service provider.
2. Search for the application you want and follow
the onscreen instructions to download it.
60
Other files
Use this menu to access any other files than image,
video, music and sound files. Your phone provides
you with Picsel File Viewer to allow you to view,
without corruption, various document files. Available
file formats are *.doc, *.xls, *.ppt, *.pdf, *.html,
and *.txt.
Viewing a document
Select a file. Picsel File Viewer runs and open the
document.
• Depending on the file size or memory capacity
of Picsel File Viewer, some files may not open
properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the content of
the document will not display correctly.
Use the following keys to view the document:
Key
Function
Up/Down/
Left/Right
Scroll to each direction on the
current page.
/
Zooms in or out.
Centre
Fits the document to the page size.
1
Searches backward through the
document for the text entered in
the Search option.
Function
2
Returns to the first page.
3
Searches forward through the
document for the text entered in
the Search option.
4
Returns to the previous page.
5
Rotates the document.
6
Moves to the next page.
8
Moves to the last page.
•
•
•
•
•
•
Hide controller/Show controller: hide or
display the shortcut tool bar in Full screen view.
Search: search for text in the document.
Send: send the file via e-mail, or Bluetooth.
Hidden from Bluetooth/Visible to Bluetooth:
hide the file so that other Bluetooth devices
cannot access it, or share the file with other
Bluetooth devices.
Lock/Unlock: lock the file to protect it from
being deleted, or unlock the file.
Details: access the file properties.
FileViewer shortcuts: view the functions of the
keys you can use in Picsel File Viewer.
Using document options
Memory card
While viewing a document, press <Options> or
< > to access the following options:
• Full screen view/Normal view: view the
document on a full screen, or return to the
normal screen.
• Zoom: zoom in or out.
• Fit to screen: fit the document to the page size,
screen width, or screen height.
• Rotate: rotate the document.
• Go to: move to another page of the document.
• Screen panning/Normal panning: change the
page scroll mode. You can scroll by screen size or
scrolling by preset pixel.
Use this menu to access the media files stored on
the memory card. This option is only available when
you insert a memory card into the phone.
File manager (Menu 6)
Changes the display to Full screen
view or Normal screen view.
•
Menu functions
Key
For details about using files, see the corresponding
menu.
61
Menu functions
Organiser
(Menu 7)
The Organiser menu enables you to keep track of
your schedule or set alarms.
Deactivating an alarm
To access this menu, press [Centre] in Idle mode
and select Organiser.
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
Alarms (Menu 7.1)
Setting alarms to sound when the phone is
off
Use this menu to set alarms to sound at specific
times. The alert type for a normal alarm corresponds
to the call alert type settings in the currently
selected profile. A wake-up alarm is not be affected
by your profile setting.
Setting an alarm
62
Press any key, except for <OK>, [Centre], and
<Snooze>, to mute the alarm tone.
From the Alarms screen, select Auto power → On.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Calendar (Menu 7.2)
Use this menu to keep track of your schedule.
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Time: enter the time for the alarm to sound.
• Repeat: select a repeat option.
• Alert tone: select an alarm tone.
3. Press <Options> and select Save.
When you enter the Calendar menu, the calendar
appears with today’s date indicated by a blue box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Stopping an alarm
Creating an item
When the time for an alarm comes and the alarm
sounds:
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press <OK> or [Centre].
Press <Snooze> to cause it to sound again after
5 minutes.
You can store scheduled items, anniversaries, tasks,
and memos on the calendar. More than one item per
day can be stored.
Selecting a day on the calendar
Entering a scheduled item
1. Select a date on the calendar.
2. Press <Options> and select New → Schedule.
Entering a task
1. Select a date on the calendar.
2. Press <Options> and select New → Task.
3. Enter information or change the settings:
• Title: enter the title for the task.
• Task: enter the task content.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press <Options> and select Save to save the
task.
Organiser (Menu 7)
Entering an anniversary
1. Select a date on the calendar.
2. Press <Options> and select New →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: set an alarm for the anniversary.
before: set how long before the anniversary
the alarm is to alert you.
• alarm time: enter the time for the alarm to
sound.
• Repeat every year: set the phone to
remind you of the anniversary every year.
4. Press <Options> and select Save to save the
anniversary.
•
Menu functions
3. Enter information or change the settings:
• Title: enter the title for the scheduled item.
• Details: enter the details of the scheduled
item.
• Start and End: enter the starting and ending
times for the scheduled item.
• Start date and End date: enter the starting
and ending dates for the scheduled item.
• Location: enter information about the
scheduled item.
• Alarm: set an alarm for the scheduled item.
• before: set how long before the scheduled
item the alarm is to alert you.
• Repeat: set the scheduled item to recur. You
can select a repeat unit.
• until: set the ending date, if the scheduled
item will recur.
• Expiry: change the expiry setting.
4. Press <Options> and select Save to save the
scheduled item.
Entering a memo
1. Select a date on the calendar.
2. Press <Options> and select New → Memo.
3. Enter the memo text and press [Down].
4. Enter the date.
5. Press <Options> and select Save to save the
memo.
63
Menu functions
Consulting the calendar
•
Once you have scheduled items, the square brackets
appear on the corner of the date call.
Viewing an item
1. Select a date on the calendar to display the
items for the day.
The following icons indicate the type of item:
•
Scheduled items
•
Anniversaries
•
Tasks
•
Memos
2. Select an item to view its details.
Using event options
From the item list, press <Options> to access the
following options:
• View: access the item.
• New: add a new item.
• Completed/To do: change the status of the
selected task.
• Month view: switch to the monthly view screen.
• Week view: switch to the weekly view screen.
• Change date/Change due date/Reschedule:
change the date of the item.
• Delete: delete the selected item.
• Delete all: delete all of the items for the
selected day.
• Send schedule/Send task: send the item via
SMS, e-mail, MMS, File messenger, or Bluetooth.
• Send memo: send the memo via SMS.
64
Print via Bluetooth: print the item via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Using calendar options
From the calendar, press <Options> to access the
following options:
• View: display the items stored for the selected
date.
• New: add a new item.
• Week view: display the weekly view screen.
• Go to today: go to today’s date.
• Go to date: enter the specific date you want to
access.
• Start date: set whether the calendar starts with
Sunday or Monday.
• Delete: delete the items for a specific period.
• Delete all: delete all of the items on the
calendar.
Week view (Menu 7.3)
You can view items for the selected week. A cell on
the timetable indicates the presence of a scheduled
item. Select a cell for the date you want.
Today’s events (Menu 7.4)
You can view items for the selected date.
Select an item to view its details. The item opens in
Edit mode.
Schedule (Menu 7.5)
Memory status (Menu 7.0)
This menu displays the scheduled items. If you have
set the Repeat and Alarm options, the
and
icons display.
Use this menu to access memory information for the
items stored on the calendar.
Select a scheduled item to view its details.
Camera
Anniversary (Menu 7.6)
You can use the camera module embedded in your
phone to take photos and record videos.
Select an anniversary to view its details.
Use this menu to display tasks you have created.
The icons on the right indicate the importance; the
lower the number on the icon, the higher the
priority. A check mark appears in the status check
box if the task has been completed.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Select a task to view its details.
Taking a photo
Memo (Menu 7.8)
You can take photos in various modes. The camera
produces JPEG photos.
This menu displays memos you have created.
Select a memo to view its details.
Missed event alarm (Menu 7.9)
When you are unable to acknowledge an alarm for a
scheduled item or anniversary, the phone stores the
missed alarm until you confirm it.
Camera (Menu 8)
Task (Menu 7.7)
To access this menu, press [Centre] in Idle mode
and select Camera. You can also press and hold
[
] in Idle mode.
Menu functions
This menu displays anniversaries you have created.
If you have set the Repeat and Alarm options, the
and
icons display.
(Menu 8)
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
Taking a photo
1. Access the Camera menu to turn on the camera
and switch the display to Capture mode. You can
also press and hold [
] in Idle mode.
65
Menu functions
2. Press [
] to switch between the front camera
lens and rear camera lens.
3. Make any desired adjustments.
• Press <
> to use camera options.
next section
• Use the keypad to change the camera
settings or switch to other modes.p. 67
4. Press [Centre] to take a photo. The photo is
saved in the Pictures folder.
5. To
use photo options
delete the photo
•
•
Press
<
> or <Options>.
p. 68
•
[C] and then <Yes>.
•
•
return to Capture mode <
> or <Back>.
send the photo via MMS [Centre].
•
Using camera options in Capture mode
In Capture mode, press <
> to access the
following options:
• Take photo: take a photo.
• Record video: switch to Record mode.
• Switch camera: switch between the front
camera lens and rear camera lens.
66
•
•
Go to Photos: access the Pictures folder.
p. 55
Shooting mode: take a photo in the following
modes:
Single shot: take a photo in Normal mode. You
can select whether or not the camera
automatically saves a photo.
Multi shot: take a series of action stills. You can
select the number of photos the camera will
take.
Mosaic shot: take several stills and save them
in one frame. You can select the layout.
Effects: change the colour tone or apply a
special effect.
Frames: apply a decorative frame.
Timer: set a time delay before the camera takes
a photo.
Zoom/Hide zoom: display the zoom control bar
and zoom in or out by pressing [Up] or [Down],
or hide the control bar.
Brightness/Hide brightness: display the
brightness control bar and adjust the brightness
by pressing [Left] or [Right], or hide the control
bar.
Camera settings: change the default settings
for taking a photo.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out. (Not available
for the maximum size)
Flips the image vertically.
Shows the mirror image.
Switches to Record mode.
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or
applies a special effect.
7
Adds a decorative frame.
8
Sets the timer.
0
Camera (Menu 8)
1
Menu functions
•
Default name: change the default prefix of file
names.
Default storage: select the memory location to
store photos, if a memory card is inserted.
Viewfinder: select a preview screen.
Shutter sound: select the sound that you hear
when you press the shutter release key.
Capture quality: select an image quality.
Image size: select an image size.
Multi shot speed: select the shooting speed in
Multi Shot mode.
Spot metering: adjust the exposure based on a
specific area of the image. Select On to display
the spot focus frame in the middle of the image,
and change the exposure according to the
brightness of the image fragment in the frame.
White balance: adjust the colour balance of the
photo. You can make your photo appear warmer
or cooler.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light
situations, select a higher ISO number. The
higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
Camera shortcuts: view the functions of the
keys you can use in Capture mode.
Goes to the Pictures folder.
Changes the preview mode.
67
Menu functions
Using photo options
After saving a photo, press <
> or <Options> to
access the following options:
• View: access one of the multi-shot photos.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Viewfinder: return to Capture mode.
• Delete: delete the selected file or all multi-shot
files.
• Set as: set the photo as wallpaper for the
display, or as a caller ID image for a Contacts
entry.
• Go to Photos: access the Pictures folder.
p. 55
• Rename: change the file name.
Recording a video
You can record a video of what is displayed on the
camera screen and save it.
1. Access the Camera menu to turn on the camera
or press and hold [
] in Idle mode.
2. Press [1] to switch to Record mode.
3. Press [
] to switch between the front camera
lens and rear camera lens.
4. Make any desired adjustments.
• Press <
> to use camera options.
next section
68
•
Use the keypad to change the camera
settings or switch to other modes.p. 69
5. Press [Centre] to start recording.
6. Press [Centre] to stop recording. The video is
saved in the Videos folder.
7. To
use video options
Press
<Options>.p. 69
delete the video clip
[C] and then <Yes>.
return to Record mode
<Back>.
send the video file via
MMS
[Centre].
Using camera options in Record mode
In Record mode, press <
> to access the following
options:
• Record: start recording.
• Take photo: switch to Capture mode.
• Switch camera: switch between the front
camera lens and rear camera lens.
• Go to Videos: access the Videos folder.p. 57
• Effects: change the colour tone or apply a
special effect.
• Zoom/Hide zoom: display the zoom control bar
and zoom in or out by pressing [Up] or [Down],
or hide the control bar.
•
•
You can use the keypad to customise your camera
settings in Record mode.
Key
Function
Left/Right
Adjusts the brightness.
Up/Down
Function
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Capture mode.
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording
mode.
5
Changes the colour tone or
applies a special effect.
7
Mutes or unmutes audio.
0
Goes to the Videos folder.
Camera (Menu 8)
Using the keypad in Record mode
Key
Menu functions
•
Brightness/Hide brightness: display the
brightness control bar and adjust the brightness
by pressing [Left] or [Right], or hide the control
bar.
Video settings: change the following settings
for recording a video:
Default name: change the default prefix of file
names.
Default storage: select the memory location to
store video clips, if a memory card is inserted.
Quality: select an image quality.
Recording time: select a video recording mode.
Select Limit for MMS to record a video suitable
for an MMS message.
Select Normal to record a video within the limit
of the currently available memory. The length of
your video is determined by how much memory
has been used.
Size: select a frame size.
Audio record: turn the audio on or off.
Camcorder shortcuts: view the functions of
the keys you can use in Record mode.
Using video options
After saving a video clip, press <Options> to access
the following options:
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Play: play back the video clip.
• Viewfinder: return to Record mode.
• Delete: delete the file.
• Go to Videos: access the Videos folder.p. 57
• Rename: change the file name.
69
Menu functions
Settings
(Menu 9)
Use this menu to customise your phone settings.
You can also reset the settings to their default
values.
To access this menu, press [Centre] in Idle mode
and select Settings.
Profiles (Menu 9.1)
Your phone provides you with sound profiles that
allow you to quickly and easily change the sound
settings of the phone for different events or
situations. Use this menu to adjust the properties of
each profile and activate the profile you need.
Editing a profile
1. Scroll to the profile you want.
2. Press <Options> and select Edit.
3. Change the sound settings:
• Call alert type: select an alert type for the
call ringer.
• Voice call ringtone: select a ringtone for
voice calls.
• Video call ringtone: select a ringtone for
video calls.
• Tone volume: adjust the volume for the call
ringer.
• Message alert type: select an alert type for
the message ringer.
• Message alert tone: select a ringtone for
the message ringer.
70
Message alert repetition: select if the
phone repeatedly reminds you of a new
message.
• Phone sounds: turn the various sounds on
the phone on or off.
All on: enable all tones.
Popup box alerts: set the phone to beep
when a pop-up window displays.
Power on/off: set the phone to beep when
you turn it on or off.
Slide tone: set the phone to sound when
you open or close it.
• Key tones: select a tone which sounds when
you press a key.
• Key tone volume: adjust the volume of the
key tones.
• Call answer mode: (For Car) select how to
answer an incoming call.
4. When you have finished, press <Options> and
select Save.
•
Changing an active profile
From the profile list, select the profile you want.
Time & date (Menu 9.2)
Use this menu to change the time and date
displayed on your phone. Before setting the time
and date, specify your time zone in the World clock
menu. p. 38
•
•
•
•
•
Phone (Menu 9.3)
Language (Menu 9.3.1)
Use this menu to select a language for the display
text or T9 input mode. If you select Automatic, the
phone uses the same language as the USIM/SIM
card.
Shortcuts (Menu 9.3.2)
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to assign a shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Press <Options> to access the following options:
• Assign: assign a shortcut menu.
• Change: change a shortcut menu assignment.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut
assignments.
Slide settings (Menu 9.3.3)
Use this menu to set how the phone reacts when
you open it for an incoming call, and when you close
it while using a function.
• Slide up: set whether or not to answer a call by
opening the phone.
• Slide down: set whether or not the phone
maintains the menu you are using when you
close the phone.
Settings (Menu 9)
Many different features of your phone’s system can
be customised to suit your preferences.
Using shortcut options
Menu functions
•
Time: enter the current time. To select AM or PM
for 12-hour time format, press [Right].
Date: enter the current date.
Time format: select a time format.
Date format: select a date format.
Summer time: select to apply daylight saving
time.
Auto update: select to receive time information
from your network.
When you set Slide down to Continue
operation, the keypad lock works just in Idle
mode.
Anykey answer (Menu 9.3.4)
Use this menu to answer an incoming call by
pressing any key, except for <Reject> and [
].
Camera key (Menu 9.3.5)
Use this menu to set a default function for [
]. If
you select Always ask, the phone will ask you to
select the function each time you press and hold
[
].
71
Menu functions
Volume key (Menu 9.3.6)
Calendar (Menu 9.4.3)
Use this menu to set whether the phone mutes the
call ringer or rejects a call if you press and hold
[ / ] when a call comes in.
Use this menu to display the calendar of the current
month on the idle screen.
Key management (Menu 9.3.7)
Use this menu to adjust the brightness of the display
for varing lighting conditions.
Use this menu to manage the licence keys you have
acquired to activate media contents locked by DRM
systems.
Press <Options> to access the following options:
• View/Play: open the corresponding media item.
• Delete: delete the selected licence key.
• Go to My Messages: access the message that
contains the media content.
• Go to File Manager: access the corresponding
file folder.
• Details: access the properties of the licence key.
Display (Menu 9.4)
Use this menu to change settings for the display.
Greeting message (Menu 9.4.1)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Wallpaper (Menu 9.4.2)
72
You can change the background image.
• Images: the phone displays the image you have
set as wallpaper for the idle screen.
• Photo slide: the phone displays a photo slide of
your favourite images for the idle screen.
LCD brightness (Menu 9.4.4)
Backlight (Menu 9.4.5)
You can select the length of time the backlight or
display stays on.
• On: select the length of time the backlight stays
on.
• Dim: select the length of time the display stays
on in Dim mode after the backlight turns off.
After a specified time, the display turns off.
Dialling display (Menu 9.4.6)
Use this menu to customise the settings for the
numbers entered and the background colour of the
display while dialling.
Main menu style (Menu 9.4.7)
You can select a display style for the main menu
screen.
Call (Menu 9.5)
Use this menu to set options for call functions.
Caller ID (Menu 9.5.1)
Some networks do not allow the user to change
this setting.
Diverting (Menu 9.5.2)
This network service allows you to restrict your calls.
1. Select the type of calls to be barred.
2. Select a call barring option:
• All outgoing calls: prohibit all outgoing
calls.
• Outgoing int’l calls: prohibit international
calls.
• Int’l calls exc. home: only allow calls to
numbers within the current country when you
are abroad, and to your home country.
• All incoming calls: prohibit incoming calls.
• Incoming calls when roaming: prohibit
incoming calls when you use your phone
outside of your home service area.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received
normally.
3. Enter the call barring password supplied by your
service provider.
4. Press <Options> and select Activate. To
deactivate the call barring, select Deactivate.
Settings (Menu 9)
This network service reroutes incoming calls to a
different phone number that you specify.
1. Select the type of calls to be diverted.
2. Select a call diverting option:
• Always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not
answer the phone.
• Unreachable: divert calls when you are not
in your service area or when your phone is
switched off.
• Cancel all: cancel all call diverting options.
3. Enter the number to which the calls will be
diverted in the Divert to line.
4. If you selected No reply, move to the Waiting
time line and select the length of time the
network delays before diverting a call.
Barring (Menu 9.5.3)
Menu functions
This network service allows you to hide your phone
number from the person you are calling. If you
select By network, the phone will use the default
setting provided by the network.
5. Press <Options> and select Activate. To
deactivate the call diverting, select Deactivate.
You can change the call barring password
obtained from your service provider. From the call
type list, press <Options> and select Change
password.
73
Menu functions
Waiting (Menu 9.5.4)
Call connect tone (Menu 9.5.7)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press <Options> and select Activate. To
deactivate the call waiting, select Deactivate.
Use this menu to set the phone to beep or vibrate
when an outgoing call is connected to the system.
Auto redial (Menu 9.5.5)
Minute minder (Menu 9.5.9)
Use this menu to make up to ten attempts to redial
a phone number after an unsuccessful call.
Closed user group (Menu 9.5.6)
Use this menu to set incoming and outgoing calls to
be restricted to a selected user group. For details
about how to create a closed user group (CUG),
contact your service provider.
• Use user group: activate CUG index numbers.
• Outside access: enable calls to numbers other
than those in the closed user group. This feature
depends on the nature of your CUG subscription.
• Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from
the list.
• Group index: add, delete, or activate CUG
index numbers.
74
Call end tone (Menu 9.5.8)
Use this menu to set the phone to beep or vibrate
when a call is disconnected by the other person or
due to a faded signal.
Use this menu to set the phone to beep every
minute during an outgoing call to keep you informed
of the length of your call.
Alerts on call (Menu 9.5.0)
Use this menu to set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
Video call (Menu 9.5. )
Use this menu to change the default settings for
using the video call feature.
• Show me: change the video camera settings for
receipt of video calls.
Optionally: you can select whether or not the
video camera is used each time you answer a
video call.
Always: the camera is always used.
• Retry by: set what to do when a video call does
not connect.
Voice call: the phone retries with a voice call.
Multimedia message: the phone will turn on
the camera and switch to Record mode so that
you can record a video and send it as an MMS
message.
None: the phone does not retry.
Use this menu to set options for connection available
on your phone.
Bluetooth (Menu 9.6.1)
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they do not
need to be in line of sight to each other.
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera, and
media player, or vice versa, for better
performance.
• Some devices may not be compatible with your
phone.
Settings (Menu 9)
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the
phone remotely.
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to locate your phone, or not.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access
your data.
• Bluetooth service: display available Bluetooth
services.
Menu functions
Connectivity (Menu 9.6)
Setting up the Bluetooth feature
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth menu, select My devices.
2. Select Search new device.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
•
Hands-free car kit or headset
•
Mobile phone
•
Computer
•
PDA
75
Menu functions
•
Unknown device
•
Printer
The colour of the icon indicates the status of the
device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected
to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>. This
code is used just once and you do not need to
memorise it.
When the owner of the other device enters the
same code, pairing is complete.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has one, you must enter
the code.
Using device options
From the device list, press <Options> to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
• Disconnect: end the connection with the
connected device.
• Browse device: search for data from the device
and import data directly to your phone.
76
•
•
•
•
Service list: access the Bluetooth service list of
the device.
Authorise device/Unauthorise device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Delete: remove the selected device or all device
from the list.
Rename: rename the selected device.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press
<Options>.
4. Select Send name card/Send/Send schedule/
Send task → Via bluetooth.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its visibility
must be enabled.
1. If an unauthorised Bluetooth device sends data
to your phone, press <Yes> to allow the device
to access your phone.
2. Press <Yes> to receive data.
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
Your phone is set up by default for connecting to
the network. If you change the settings without
first checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
Creating a profile
1. Press <New>, or press <Options> and select
New.
2. Specify profile parameters:
• Set name: enter a profile name.
• Access name: edit the access point name
used for the address of the GPRS network
gateway.
• Auth type: choose the type of
authentication used.
• User ID: enter the user ID.
• Password: enter the user password.
• Protocol: select the protocol from among
WAP, HTTP, and Other.
• Home URL: enter the URL address of the
page to be used as your homepage.
• Gateway address: (WAP only) enter the
gateway address of the proxy server.
Settings (Menu 9)
Connections (Menu 9.6.3)
Use this menu to change the settings for connecting
to your cellular network.
• Network selection: select to either manually
select the network to be used when roaming
outside of your home area, or to let the network
be chosen automatically. You can select a
network other than your home network only if
there is a valid roaming agreement between the
two.
• Network mode: select the network you use.
Automatic: the phone scans for available
networks.
GSM 900/1800: the phone operates in the
combined GSM 900/1800 network.
GSM 1900: the phone operates in the GSM
1900 network. This option is only available in the
U.S.A.
UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher speed
connection than on lower generation networks,
and use advanced data and information services,
such as video calls.
Menu functions
Network (Menu 9.6.2)
77
Menu functions
•
Proxy address/Port: (HTTP only) set the
proxy server address and port.
• Secure connection: (WAP only) turn the
secure mode on or off.
• Linger time (sec.): set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
• Advanced settings: provide you with the
following options:
Static IP: specify if you want to manually
enter an IP address; see the Local phone IP
option. If you want the IP address to be
automatically assigned by the server, remove
the check mark.
Local phone IP: enter the IP address
obtained from the network operator, if you
checked the Static IP option.
Static DNS: specify if you want to manually
enter the Domain Name Server (DNS)
address; see the Server 1/Server 2 option.
If you want the address to be automatically
assigned by the server, remove the check
mark.
Server 1: enter the Domain Name Server
(DNS) address.
Server 2: enter the Domain Name Server
(DNS) address.
Traffic class: select the traffic class.
3. Press <Save> to save the profile.
78
Using profile options
From the profile list, press <Options> to access the
following options:
• Edit: edit the profile.
• New: add a new profile.
• Rename: change the profile name.
• Delete: delete the profile.
• Restore: restore the changed settings to the
default status.
Application settings (Menu 9.7)
You can customise the settings for using applications
available on the phone.
Internet (Menu 9.7.1)
Use this menu to select a connection profile to be
used for accessing the Internet. You can also create
or edit a profile.p. 77
Messages (Menu 9.7.2)
Use this menu to change the default settings for
using the messaging services. p. 51
Contacts (Menu 9.7.3)
Use this menu to change the settings for using
Contacts.p. 34
Camera (Menu 9.7.4)
Use this menu to change the default settings for
taking photos.p. 66
Video recorder (Menu 9.7.5)
Phone lock (Menu 9.8.1)
Use this menu to change the default settings for
recording videos.p. 69
Use this menu to protect the phone from
unauthorised use. When this feature is enabled, you
must enter a 4- to 8-digit phone password each time
the phone is switched on.
Voice recorder (Menu 9.7.6)
Media player (Menu 9.7.7)
Use this menu to change the default settings for
playing media files in the media player.p. 36
VOD (Menu 9.7.8)
Security (Menu 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and USIM/SIM card.
If you enter an incorrect PIN/PIN2 three times, the
USIM/SIM card is blocked. To unblock it, you need
to enter your PUK/PUK2 (Personal Unblocking
Key). The codes are supplied by your network
operator.
SIM lock (Menu 9.8.2)
This menu allows your phone to work only with the
current USIM/SIM by assigning a USIM/SIM lock
code. You must enter the USIM/SIM lock code to use
a different USIM/SIM card.
Settings (Menu 9)
Use this menu to activate a connection profile to be
used for accessing streaming servers to use VOD
(Video on Demand) services. You can also create or
edit a profile.p. 77
The password is preset to 00000000. To change the
password, use the Change phone password
menu.
Menu functions
Use this menu to change the default settings for the
voice recorder.p. 38
PIN lock (Menu 9.8.3)
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card against
unauthorised use. When this feature is enabled, the
phone requires your PIN each time it is switched on.
Fixed dialling mode (Menu 9.8.4)
If supported by your USIM/SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing calls to
a limited set of phone numbers. When this feature is
enabled, you can make calls only to phone numbers
stored on the USIM/SIM card.
Change phone password (Menu 9.8.5)
Use this menu to change your phone password.
79
Menu functions
Privacy lock (Menu 9.8.6)
Use this menu to lock access to messages, media
files, Contacts entries, call records, or calendar data.
When a lock option is enabled, you must enter the
phone password to access the locked items.
Change PIN code (Menu 9.8.7)
Use this menu to change your PIN. The PIN lock
feature must be enabled to change the PIN.
Change PIN2 code (Menu 9.8.8)
If supported by your USIM/SIM card, use this menu
to change your current PIN2.
Mobile tracker (Menu 9.8.9)
When someone tries to use your phone with another
USIM/SIM card, the phone will automatically send
the preset tracking message to your family or
friends. You can check the phone number from
which the messages are sent and then track your
phone. This feature is useful when the phone is
stolen or lost.
Sending of the tracking message will be billed to
the user of the unauthorised USIM/SIM card. To
use your phone with any other USIM/SIM card,
you must first deactivate the Mobile tracker
feature.
1. Enter the phone password and press
<Confirm>.
80
2. Specify the following options:
• Activation: activate or deactivate the Mobile
tracker feature.
• Recipients: specify phone numbers to which
you want to send the tracking messages.
• Sender: enter the sender’s name.
• Messages: check the preset tracking
message text.
3. When you have finished, press <Save>.
4. Press <Accept> if you agree to the terms and
conditions of service listed on the screen.
Memory status (Menu 9.9)
Use this menu to check the amount of memory
being used for storing data, such as messages,
media files, calendar data, or Contacts entries. You
can view the amount of shared memory.
Operator settings (Menu 9.0)
Use this menu to set a service provider according to
the USIM/SIM card you are using.
When you select a service provider, the phone will
automatically turn itself off and then back on. You
can then see the profiles corresponding to the
service provider in the connection menus.
Reset settings (Menu 9. )
Use this menu to reset the phone’s settings you
have changed and clear all data you have added.
1. Enter the phone password and press
<Confirm>.
The password is preset to 00000000. You can
change this password. p. 79
2. Press <Yes>. The phone automatically turns
itself off and then back on.
Solve problems
Help and personal needs
To save the time and expense of an unnecessary
service call, perform the simple checks in this
section before contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Please insert SIM card”
• Be sure that the USIM/SIM card is correctly
installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
“PIN lock”
• You are using your phone for the first time. You
must enter the PIN supplied with the USIM/SIM
card.
• The PIN lock feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN lock menu.
“PUK lock”
• The PIN code was entered incorrectly three
times, and the USIM/SIM card is now blocked.
Enter the PUK supplied by your service provider.
81
Solve problems
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may
be in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct
cellular network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
82
The phone starts beeping and “Low battery”
flashes on the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
). The number of bars indicates the
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer
to a window if you are in a building.
No number is dialled when you re-call a
Contacts entry
• Use the Search contact feature to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
The battery does not charge properly or the
phone sometimes turns itself off
• Wipe the charging contacts both on the phone
and on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung aftersales service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It
is designed and manufactured to not exceed the limits
for exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part
of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines were developed by independent scientific
organisations through the periodic and thorough
evaluation of scientific studies. The limits include a
substantial safety margin designed to ensure the safety
of all persons, regardless of age and health.
The exposure standard for mobile phones employs a
unit of measurement known as Specific Absorption Rate
(SAR). The SAR limit recommended by the EU Council is
2.0W/kg.*
The highest SAR value for this model phone was 0.655
W/kg.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to
reach the network. In general, the closer you are to a
base station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
Precautions when using batteries
•
•
•
•
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary, depending on national
reporting requirements and the network band.
•
Never use a charger or battery that is damaged in
any way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base
station, it uses less power. Talk and standby time are
greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time is noticeably shorter than
normal, it is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
83
Health and safety information
•
•
•
•
•
84
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when
it is not in use. Do not leave the battery connected
to a charger for more than a week, since
overcharging may shorten its life.
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
Do not leave the battery in hot or cold places
because the capacity and lifetime of the battery will
be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery may
not work temporarily, even when the battery is fully
charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a
coin, clip or pen causes a direct connection between
the + and – terminals of the battery (metal strips on
the battery). For example, do not carry a spare
battery in a pocket or bag where the battery may
contact metal objects. Short-circuiting the terminals
may damage the battery or the object causing the
short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Operating environment
Remember to follow any special regulations in force in
the area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Vehicles
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research. If you have any reason to suspect that
interference is taking place, switch off your phone
immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other medical devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally
be advised to turn off your vehicle engine.
Health and safety information
Electronic devices
85
Health and safety information
86
Emergency calls
Other important safety information
This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
•
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless
phone networks or when certain network services and/
or phone features are in use. Check with local service
providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
•
•
•
•
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air
bag inflates.
Switch off your phone before boarding an aircraft.
It is dangerous and illegal to use wireless phones in
an aircraft because they can interfere with the
operation of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and maintenance
•
•
•
•
•
•
soft cloth slightly dampened in a mild soap-andwater solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such
as a microwave oven, stove, or radiator. The phone
may explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may
cause damage to their eyes.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Health and safety information
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Keep your phone and all its parts and accessories
out of the reach of small children and pets. They
may accidentally damage these things or choke on
small parts.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to the
phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
• Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
87
Index
A
ABC mode, text input • 24
Alarm • 62
Answering
call • 25, 28
second call • 26
Anykey answer • 71
Auto redial • 74
B
Background image • 72
Backlight time, set • 72
Barring, calls • 73
Battery
charging • 7
low indicator • 8
precautions • 83
Bluetooth
receiving, data • 76
sending, data • 76
settings • 75
Broadcast messages • 50
Browser, web • 40
C
Calculator • 39
Calendar • 62
Call cost • 30
Call log
dialled • 29
missed • 29
received • 29
Call time • 30
Caller groups • 33
Caller ID • 73
88
Calls
contacts • 31
e-mail • 49, 50
MMS • 47, 50
SMS • 47, 50
Display
backlight, set • 72
brightness • 72
icons • 10
language • 71
layout • 10
settings • 72
Diverting, calls • 73
Document files • 60
DRM (Digital Rights Management) • 55
DTMF tones, send • 27
answering • 25, 28
barring • 73
diverting • 73
holding • 26
making • 25
redialling • 25
rejecting • 25
transferring • 27
waiting • 74
Camera
photos • 65
videos • 68
Characters, enter • 23
Configuration messages • 47
Connection settings • 77
Connection tone • 74
Contacts
adding • 32
deleting • 31
editing • 31
finding • 31
options • 31
speed-dialling • 33
Converter • 39
Creating messages
e-mail • 45
MMS with files • 44
MMS • 43
SMS • 42
CUG (Closed User Groups) • 74
E
D
Games • 59
Greeting message • 72
Date, set • 71
Deleting
call log • 29
E-mails
creating/sending • 45
deleting • 49
settings • 53
viewing • 48
Emergency calls • 86
F
FDN (Fixed Dialling Number) mode •
79
File manager • 55
File sender • 44
File viewer • 60
G
H
Health and safety • 83
Holding, call • 26
I
J
Java applications • 59
K
Key tones
selecting • 70
sending/muting • 27
volume • 70
L
Language, select • 71
Last number, redial • 25
Locking
media contents • 80
phone • 79
USIM/SIM card • 79
Low battery indicator • 8
M
Memory card
accessing files • 61
installing • 22
Memory status
calendar items • 65
contacts • 34
messages • 54
phone • 80
N
Name card • 34
Names
entering • 23
searching • 31
Network selection • 77
O
Organiser • 62
Outbox, messages • 48
P
Password
barring • 73
phone • 79
Phone
care and maintenance • 87
display • 10
icons • 10
locking • 79
password • 79
resetting • 81
switching on/off • 8
unpacking • 6
Photos
editing • 55
taking • 65
viewing • 55
PIN, change • 80
PIN2, change • 80
Power on/off tone • 70
Privacy • 80
Problems, solve • 81
Profiles • 70
Push messages • 47, 54
Index
Icons, description • 10
Images, downloaded • 55
Inbox, messages
e-mail • 48
SMS/MMS • 46
International calls • 25
Internet • 40
Messages
broadcast • 50
configuration • 47
e-mail • 48
greeting • 72
MMS with files • 44, 47
MMS • 43, 47
push • 47
SMS • 42, 46
Minute minder • 74
Missed alarm events • 65
Missed calls 26
MMS messages
creating/sending • 43, 44
deleting • 47, 50
settings • 51
viewing • 47
Mobile tracker • 80
Multiparty-call • 27
Music, downloaded • 57
R
Received messages
e-mail • 48
MMS/SMS • 46
Recording
videos • 68
voice memos • 37
Redialling
automatically • 74
manually • 25
Resetting phone • 81
Ringer
incoming calls • 70
messages • 70
Road safety • 84
Roaming • 77
S
Safety
information • 83
precaution • 1
Security calls • 79
Sent messages • 48
89
Index
Shortcuts • 71
SIM card
inserting • 7
locking • 79
Slide tone • 70
SMS messages
creating/sending • 42
deleting • 47, 50
settings • 51
viewing • 46
Sound settings • 70
Sounds, downloaded • 58
Speakerphone • 27
Speed-dial • 33
Switching applications • 22
Switching on/off
microphone • 27
phone • 8
T
T9 mode, text input • 23
Templates, message • 49
Text, enter • 23
Time, set • 71
U
USIM card
inserting • 7
locking • 79
V
Video calls
answering • 28
making • 28
options • 28
setting • 74
90
Videos
playing • 57
recording • 68
Voice recorder
playing • 37
recording • 37
Voicemail server • 54
W
Waiting call • 74
Wallpaper • 72
Web browser
access • 40
bookmarks • 41
World time • 38
: EN 60950-1:2001
: EN 301 489-01 v.1.4.1 (08-2002)
EN 301 489-07 v.1.2.1 (08-2002)
EN 301 489-17 v.1.2.1 (08-2002)
EN 301 489-24 v.1.2.1 (11-2002)
: EN 50360:2001
EN 50361:2001
: EN 301 511 v.9.0.2 (03-2003)
EN 301 908-1 v.2.2.1 (10-2003)
EN 301 908-2 v.2.2.1 (10-2003)
EN 300 328 v.1.6.1 (11-2004)
Yong-Sang Park / S. Manager
(name and signature of authorized person)
*This is not the address of the Samsung Service Centre. For the address or the phone number of Samsung Service Centre,
see the warranty card or contact the retailer where you purchased your phone.
(place and date of issue)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2006. 05. 16
(Representative in the EU)
which will be made available upon request.
Samsung Electronics QA Lab.
The technical documentation kept at:
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV] of
Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):
We hereby declare the [all essential radio test suites have been carried out and that] the above
named product is in conformity to all the essential requirements of Directive 1999/5/EC.
Network
SAR
Safety
EMC
to which this declaration relates, is in conformity with the following standards and/or other
normative documents.
(factory name, address*)
Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City, Kyung-Buk, Korea, 730-350
Manufactured at:
(Model name)
SGH-Z400
(Product description)
Portable Cellular Telephone
GSM900/GSM1800/GSM1900/WCDMA with Bluetooth
For the following product:
Declaration of Conformity (R&TTE)
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-10996A
English (EU). 06/2006. Rev. 1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement