Connect Tech SSD/104 SATA User manual

Connect Tech SSD/104 SATA User manual
Intel® Solid-State Drive 530 Series (mSATA)
Intel® Solid-State Drive 530 Series
(mSATA)
Product Specification

Capacities: 80 GB, 120 GB, 180 GB, 240 GB

Components:
−
−
Power Management
− 3.3 V SATA Supply Rail
− SATA Link Power Management (LPM)
− Device Sleep (DevSleep)

Power
− Active (BAPCo MobileMark* 2007
Workload): 140 mW
− Idle3: 55 mW
− DevSleep: 200 µW

Temperature
o
o
− Operating4: 0 C to 70 C
o
o
− Non-Operating: -55 C to 95 C

Reliability
— Uncorrectable Bit Error Rate (UBER):
<1 sector per 1016 bits read
— Mean Time Between Failure (MTBF):
1,200,000 hours
— Shock (operating and non-operating):
1,000 G/0.5 msec

Vibration
— Operating: 2.17 GRMS (5-700 Hz)
— Non-operating: 3.13 GRMS (5-800 Hz)

Certifications and Declarations:
− UL*
− CE*
− C-Tick*
− BSMI*
− KCC*
− Microsoft* WHCK (Windows* 7 and 8)
− VCCI*
− SATA-IO*

Product Ecological Compliance
− RoHS*
®
Intel 20 nm NAND Flash Memory
Multi-Level Cell (MLC)

Form Factors: mSATA full size

Thickness: up to 3.8 mm

Weight: < 10 grams

SATA 6Gb/s Bandwidth Performance
(Iometer* Queue Depth 32)
− Sustained Sequential Read: up to 540 MB/s
− Sustained Sequential Write: up to 490
MB/s
1
Read and Write IOPS
(Iometer Queue Depth 32)
− Random 4 KB Reads: up to 41,000 IOPS


1
−
2
Random 4 KB Writes: up to 80,000 IOPS

Data Compression

AES 256-bit Encryption

End-to-End Data Protection

Compatibility
®
®
®
Data Migration Software
−
Intel SSD Toolbox with Intel
Optimizer
−
Intel
−
−
−
−
Intel Rapid Storage Technology
SATA Revision 3.0
ACS-2 (ATA/ATAPI Command Set 2)
SSD Enhanced SMART ATA feature set
NOTES:
1.
2.
3.
4.
®
SSD
Performance values vary by capacity.
Random 4 KB writes measured using out-of-box SSD
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the
system for maintaining proper device operating temperatures on heavier workloads.
September 2013
Order Number: 329280-002US
Product Specification
1
Intel® Solid-State Drive 530 Series (mSATA)
Ordering Information
Contact your local Intel sales representative for ordering information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,
BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED
IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY
OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT,
COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal
injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU
SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS,
OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE
ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR
DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR
WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the
absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future
definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The
information here is subject to change without notice. Do not finalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to
deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained
by calling 1-800-548-4725, or go to: http://www.intel.com/design/literature.html
Low Halogen applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel
components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB/substrate meet
IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the
environment.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2013 Intel Corporation. All rights reserved.
Product Specification
2
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
Contents
Revision History .................................................................................................................... 4
1
Introduction ............................................................................................................... 5
1.1
1.2
Terminology ................................................................................................................. 6
Reference Documents .................................................................................................... 7
2
Product Specifications ................................................................................................ 8
2.1
2.2
2.3
2.4
2.5
2.6
Capacity ...................................................................................................................... 8
Performance ................................................................................................................. 8
Electrical Characteristics ................................................................................................ 9
Environmental Conditions............................................................................................. 10
2.4.1
Temperature, Shock, Vibration ........................................................................ 10
2.4.2
Altitude ......................................................................................................... 10
Product Regulatory Compliance ..................................................................................... 11
Reliability ................................................................................................................... 12
3
Mechanical Information ........................................................................................... 13
4
Pin and Signal Descriptions ...................................................................................... 14
4.1
4.2
4.3
Pin Locations .............................................................................................................. 14
Signal Descriptions ...................................................................................................... 15
Device Sleep Feature ................................................................................................... 16
5
Supported Command Sets ........................................................................................ 17
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
5.13
ATA General Feature Command Set ...............................................................................
Power Management .....................................................................................................
Security Mode Feature Set ...........................................................................................
SMART Command Set ..................................................................................................
5.4.1
SMART Attributes ...........................................................................................
5.4.2
SMART Logs ..................................................................................................
Device Statistics .........................................................................................................
SMART Command Transport .........................................................................................
Data Set Management Command Set ............................................................................
Host Protected Area Command Set ................................................................................
48-Bit Address Command Set .......................................................................................
General Purpose Log Command Set ...............................................................................
Native Command Queuing ............................................................................................
Software Settings Preservation .....................................................................................
SATA Link Power Management (LPM) .............................................................................
6
Certifications and Declarations ................................................................................ 25
7
Appendix .................................................................................................................. 26
September 2013
Order Number: 329280-002US
17
18
18
19
19
22
22
23
23
23
23
23
23
24
24
Product Specification
3
Intel® Solid-State Drive 530 Series (mSATA)
Revision History
Document
Number
Revision
Number
329280
001US
Initial Release
329280
002US
Added 120 GB Capacity
Product Specification
4
Description
Revision Date
July 2013
September 2013
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
1
Introduction
This document describes the specifications and capabilities of the Intel® Solid-State Drive 530 Series
(Intel® SSD 530 Series).
The Intel® SSD 530 Series is a case-less mSATA (mini-SATA) design that is designed for Ultrabook™
and small form factor compute platforms. This form factor allows ultra-compact solutions which deliver
leading performance for Serial Advanced Technology Attachment (SATA)-based computers in
capacities ranging up to 240GB.
The latest feature addition is the DevSleep functionality, a low power drive state controlled by the host
via the DevSleep pin. The drive will consume a mere 200 µW while in this state.
As compared to standard SATA HDDs, Intel SSD 530 Series offers these key features:
•
High I/O and throughput performance
•
Lower power consumption
•
Increased system responsiveness
•
Higher reliability
•
Enhanced ruggedness
•
Small form-factor
•
Minimum weight
The Intel SSD 530 Series also offers additional key features such as:
•
Advanced Encryption Standard (AES) 256-bit Encryption
AES 256-bit encryption is an industry standard in data security, providing a hardware-based
mechanism for encryption and decryption of user data. Utilizing a 256-bit encryption key, AES
encryption—when combined with an ATA drive password—helps protect user data.
•
End-to-End Data Protection
End-to-end data protection helps protect data from being corrupted across the data path by using
cyclic redundancy check (CRC), parity, and error correction code (ECC) checks in the data path from
the host interface to the NAND, and back.
•
Data Compression
Data compression helps improve performance and endurance by automatically compressing
information sent to the SSD so that less data has to be processed and stored on the NAND. The
amount of data that can be compressed depends on the type of data.
September 2013
Order Number: 329280-002US
Product Specification
5
Intel® Solid-State Drive 530 Series (mSATA)
1.1
Terminology
Table 1: Terminology
Term
Description
ATA
Advanced Technology Attachment
DAS
Device Activity Signal
DevSleep
Device Sleep, a power feature that allows the host to initiate ultra-low power
consumption by the drive.
DIPM
Device Initiated Power Management
DMA
Direct Memory Access
EXT
Extended
FPDMA
First Party Direct Memory Access
GB
Gigabyte (1,000,000,000 bytes)
Note: The total usable capacity of the SSD may be less than the total physical
capacity because a small portion of the capacity is used for NAND flash
management and maintenance purposes.
HDD
Hard Disk Drive
HIPM
Host Initiated Power Management
I/O
Input/Output
IOPS
Input/Output Operations Per Second
KB
Kilobyte (1,024 bytes)
LBA
Logical Block Address
LPM
Link Power Management
MB
Megabyte (1,000,000 bytes)
MLC
Multi-level Cell
MTBF
Mean Time Between Failures
NCQ
Native Command Queuing
NOP
No Operation
PIO
Programmed Input/Output
RDT
Reliability Demonstration Test
RMS
Root Mean Squared
SATA
Serial Advanced Technology Attachment
SMART
Self-Monitoring, Analysis and Reporting Technology
SSD
Solid-State Drive
TYP
Typical
UBER
Uncorrectable Bit Error Rate
Product Specification
6
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
1.2
Reference Documents
Table 2: Standard References
Date or Rev. #
Title
Location
Dec 2008
IEC 55022 Information Technology
Equipment — Radio disturbance
Characteristics— Limits and methods of
measurement CISPR22:2008 (Modified)
VCCI
June 2009
RoHS
June 2009
Serial ATA Revision 3.0
http://www.sata-io.org/
August 2009
ACS-2 Specification
http://www.t13.org/
Sept 2008
August 2010
Sept 2010
Oct 2010
July 2011
IEC 55024 Information Technology
Equipment — Immunity characteristics—
Limits and methods of measurement
CISPR24:2010
Solid-State Drive (SSD) Requirements and
Endurance Test Method (JESD218)
JEDEC Solid-State Product Outline –
mSATA SSD Assembly
Serial ATA Revision 3.1 (mSATA
definition)
September 2013
Order Number: 329280-002US
http://www.iec.ch/
http://www.vcci.jp/vcci_e/
http://qdms.intel.com/
Click Search MDDS Database and search
for material description datasheet
http://www.iec.ch/
http://www.jedec.org/standardsdocuments/docs/jesd218/
http://www.jedec.org/
http://www.sata-io.org/
Product Specification
7
Intel® Solid-State Drive 530 Series (mSATA)
2
Product Specifications
2.1
Capacity
Table 3: User Addressable Sectors
Intel® SSD 530 Series
Unformatted Capacity (Total User Addressable Sectors in LBA mode)
80 GB
120 GB
180 GB
240 GB
2.2
156,301,488
234,441,648
351,651,888
468,862,128
Performance
Table 4: Compressible Performance
Specification
Unit
1
Random 4 KB Read (up to)
Random 4 KB Write (up to) 2
Random 4 KB Write (TYP) 1
Sequential 128 KB Read
(SATA 6 Gb/s) 1
Sequential 128 KB Write
(SATA 6 Gb/s) 1
Note:
1.
2.
Intel® SSD 530 Series
80 GB
120 GB
180 GB
240 GB
IOPS
IOPS
IOPS
24,000
80,000
33,000
24,000
80,000
37,500
41,000
80,000
49,000
41,000
80,000
49,000
MB/s
540
540
540
540
MB/s
480
480
490
490
Performance measured using Iometer* with Queue Depth 32. Measurements are performed on 8 GB of
Logical Block Address (LBA) range on a full SSD
Random 4 KB writes measured using out-of-box SSD
Table 5: Incompressible Performance
Specification
Unit
1
Random 4 KB Read (up to)
Random 4 KB Write (up to) 1
Sequential 128 KB Read
(SATA 6Gb/s) 1
Sequential 128 KB Write
(SATA 6Gb/s) 1
Note:
1.
Intel® SSD 530 Series
80 GB
120 GB
180 GB
240 GB
IOPS
IOPS
20,500
9,200
18,000
15,000
37,500
17,000
37,500
23,000
MB/s
430
450
470
510
MB/s
100
130
170
230
Performance measured using Iometer* with Queue Depth 32
Product Specification
8
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
Table 6: Latency
Specification
Intel® SSD 530 Series
80 GB
120 GB
1
Read
Write1
Power On To Ready2
Note:
1.
2.
2.3
180 GB
240 GB
80 µs (TYP)
85 µs (TYP)
1 s (TYP)
Based on sequential 4 KB using Iometer with Queue Depth 1 workload with compressible (non-random)
data pattern. Write Cache enabled.
Power On To Ready time assumes proper shutdown
Electrical Characteristics
Table 7: Operating Voltage and Power Consumption
Electrical Characteristics
Value
80 GB
Operating Voltage for 3.3 V (±5%)
Min
Max
Rise Time (Max/Min)
Fall Time (Max/Min)
Noise Tolerance
Min Off Time1
Power Consumption (TYP)
Active2
Idle3
DevSleep4
Thermal Power5
Regulator Power6
Note:
1.
2.
3.
4.
5.
6.
120 GB
180 GB
240 GB
3.14 V
3.47 V
100 ms / 0.1 ms
5 s / 1 ms
70 mV pp (10 Hz – 30 MHz)
1s
2.7 W
3.1 W
3W
3.4 W
140 mW
55 mW
200 µW
3.8 W
4.5 W
4.1 W
4.9 W
Minimum time from when power removed from drive (Vcc < 100 mV) to when power can be reapplied to
drive
Active power measured during execution of MobileMark* 2007 with SATA Link Power Management (LPM)
enabled.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
Power consumption during DevSleep state.
Power measured during 128 KB sequential writes with Queue Depth 32 workload using 100 ms sample
period. This represents power that would be thermal load on system during heavy workloads.
Power measured during 128 KB sequential writes with Queue Depth 32 workload using 500 µs sample
period. This represents power that system power supply would have to regulate for proper device
operation.
September 2013
Order Number: 329280-002US
Product Specification
9
Intel® Solid-State Drive 530 Series (mSATA)
2.4
Environmental Conditions
2.4.1
Temperature, Shock, Vibration
Table 8: Temperature, Shock, Vibration
Electrical Characteristics
Module Temperature
Operating1
Non-operating2
Temperature Gradient3
Operating
Non-operating
Humidity
Operating
Non-operating
Shock and Vibration
Shock4
Operating
Non-operating
Vibration5
Operating
Non-operating
Note:
1.
2.
3.
4.
5.
2.4.2
Range
0º C - 70º C
-55º C - 95º C
30 (TYP) ºC /hr
30 (TYP) ºC /hr
5 – 95 %
5 – 95 %
Range
1,000 G (Max) at 0.5 msec
1,000 G (Max) at 0.5 msec
2.17 GRMS (5-700 Hz) Max
3.13 GRMS (5-800 Hz) Max
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the
system for maintaining proper device operating temperature on heavier workloads.
Please contact your Intel representative for details on the non-operating temperature range.
Temperature gradient measured without condensation.
Shock specifications assume the SSD is mounted securely with the input vibration applied to the drivemounting screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using
peak acceleration and pulse width value.
Vibration specifications assume the SSD is mounted securely with the input vibration applied to the
drive-mounting screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is
measured using Root Mean Squared (RMS) value.
Altitude
The drive is not sensitive to changes in atmospheric pressure because it has no moving parts. Drive
tested under non-operational conditions to pressures representative of -1 K and +40 K feet.
Product Specification
10
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
2.5
Product Regulatory Compliance
The Intel® SSD 530 Series meets or exceeds the regulatory or certification requirements in the table
below.
Table 9: Product Regulatory Compliance Specifications
Title
TITLE 47-Telecommunications CHAPTER
1— FEDERAL COMMUNMICATIONS
COMMISSION PART 15 — RADIO
FREQUENCY DEVICES
Description
FCC Part 15B Class B
Region For Which
Conformity
Declared
USA
CA/CSA – CEI/IEC CISPR 22-10 (Ref. CISPR
22: 2008)
Canada
IEC 55024 Information Technology
Equipment — Immunity characteristics—
Limits and methods of measurement
CISPR24:2010
EN-55024: 2010 and its amendments
European Union
IEC 55022 Information Technology
Equipment — Radio disturbance
Characteristics— Limits and methods of
measurement CISPR24:2008 (Modified)
EN-55022: 2010 and its amendments
European Union
EN-60950-1 2nd Edition
Information Technology Equipment —
Safety — Part 1: General Requirements
USA/Canada
UL/CSA EN-60950-1 2nd Edition
Information Technology Equipment —
Safety — Part 1: General Requirements
USA/Canada
ICES-003, Issue 4 Interference-Causing
Equipment
Standard Digital Apparatus
September 2013
Order Number: 329280-002US
Product Specification
11
Intel® Solid-State Drive 530 Series (mSATA)
2.6
Reliability
The Intel® SSD 530 Series meets or exceeds SSD endurance and data retention requirements as
specified in the JESD218 specification.
Table 10: Reliability Specifications
Parameter
Value
Uncorrectable Bit Error Rate (UBER)
Uncorrectable bit error rate will not exceed one sector in the specified
number of bits read. In the unlikely event of a non-recoverable read error,
the SSD will report it as a read failure to the host; the sector in error is
considered corrupt and is not returned to the host.
< 1 sector per 1016 bits read
Mean Time Between Failures (MTBF)
Mean Time Between Failures is estimated based on Telcordia*
methodology and demonstrated through Reliability Demonstration Test
(RDT).
≥ 1.2 million hours
Minimum Useful Life/Endurance Rating
The SSD will have a minimum useful life based on a typical client workload
assuming up to 20 GB of host writes per day.
Insertion Cycles
Maximum insertion/removal cycles on mSATA port
Product Specification
12
5 years
250 insertion/removal cycles
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
3
Mechanical Information
The figure below shows the mechanical information for the mSATA full size Intel® SSD 530 Series
SSD. All dimensions are in millimeters.
Figure 1: Dimensions for Full Size mSATA Drives
September 2013
Order Number: 329280-002US
Product Specification
13
Intel® Solid-State Drive 530 Series (mSATA)
4
Pin and Signal Descriptions
4.1
Pin Locations
Figure 2: Layout of Signal and Power Segment Pins
Product Specification
14
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
4.2
Signal Descriptions
Table 11.
Serial ATA Power Pin Definitions
Pin1
Function
Definition
P1
Reserved
No Connect
P2
+3.3 V
3.3 V Source
P3
Reserved
No Connect
P4
GND
Ground
P5
Reserved
No Connect
+1.5 V
1.5 V Source
P7
Reserved
No Connect
P8
Reserved
No Connect
P9
GND
Ground
P10
Reserved
No Connect
P11
Reserved
No Connect
P12
Reserved
No Connect
P13
Reserved
No Connect
P14
Reserved
No Connect
P15
GND
Ground
P16
Reserved
No Connect
P17
Reserved
No Connect
P18
GND
Ground
P19
Reserved
No Connect
P20
Reserved
No Connect
P21
GND
Ground
P22
Reserved
No Connect
P23
+B
Host Receiver Differential Signal Pair (This is an output of the SSD)
P24
+3.3 V
3.3 V Source
P25
-B
Host Receiver Differential Signal Pair (This is an output of the SSD)
P26
GND
Ground
P27
GND
Ground
P281
+1.5 V
1.5 V Source
P29
GND
Ground
P302
Two Wire Interface
Two Wire Interface Clock
P31
-A
Host Transmitter Differential Signal Pair (This is an input of the SSD)
P322
Two Wire Interface
Two Wire Interface Data
P6
1
September 2013
Order Number: 329280-002US
Product Specification
15
Intel® Solid-State Drive 530 Series (mSATA)
Table 11.
Serial ATA Power Pin Definitions
Pin1
Function
Definition
P33
+A
Host Transmitter Differential Signal Pair (This is an input of the SSD)
P34
GND
Ground
P35
GND
Ground
P36
Reserved
No Connect
P37
GND
Ground
P38
Reserved
No Connect
P39
+3.3 V
3.3 V Source
P40
GND
Ground
P41
+3.3 V
3.3 V Source
P42
Reserved
No Connect
P43
Device Type
No Connect
P44
DevSleep
Device Sleep pin
P453
Vendor
Vendor Specific / Manufacturing Pin
P46
Reserved
No Connect
P473
Vendor
Vendor Specific / Manufacturing Pin
1
P48
+1.5 V
1.5 V Source
P49
DAS/DSS
Device Activity Signal / Disable Staggered Spin-up
P50
GND
Ground
P514
Presence Detection
Shall be pulled to GND by device
P52
+3.3 V
3.3 V Source
Note:
1.
3.
3.
4.
4.3
1.5 V rail is not used on the Intel SSD 530 Series. No connect on the host side. Pin 6, 28, and 48 shall be unconnected on
the device side to avoid conflicts with wireless coexistence pins as specified in PCI Express Mini Card Specification.
Pins 30 and 32 are intended for use as a two-wire interface to read a memory device to determine device information (an
example of this would be for use as SMB bus pins). These pins are not designed to be active in conjunction with the SATA
signal differential pairs. Not used on the Intel SSD 530 Series. No connect on the host side.
Vendor-specific pins are not used in the Intel SSD 530 Series. No connect on the host side.
Presence detection pin indicates presence of an mSATA device.
Device Sleep Feature
Device Sleep (or DevSleep/DEVSLP) is a new platform feature aligned with the mobile Intel® 4th
Generation Core™ Processor. Many new mobile computing platforms, such as Ultrabooks™, have
stringent power requirements for SSDs and require an ability to put the drive in a low power state.
Although Link Power Management allows some control over power consumption, both methods still
require the SATA link to remain online. The DevSleep pin is an enable high pin.
Product Specification
16
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
5
Supported Command Sets
The Intel SSD 530 Series supports all mandatory Advanced Technology Attachment (ATA) and Serial
ATA (SATA) commands defined in the ACS-2 and SATA Revision 3.0 specifications. The mandatory and
optional commands are defined in this section.
5.1
ATA General Feature Command Set
General Feature command set (non-PACKET), which consists of:
− EXECUTE DEVICE DIAGNOSTIC
− FLUSH CACHE
− IDENTIFY DEVICE 1
− READ DMA
− READ SECTOR(S)
− READ VERIFY SECTOR(S)
− SEEK
− SET FEATURES
− WRITE DMA
− WRITE SECTOR(S)
− READ MULTIPLE
− SET MULTIPLE MODE
− WRITE MULTIPLE
The Intel
−
−
−
−
SSD 530 Series also supports the following optional commands:
READ BUFFFER
WRITE BUFFER
NOP
DOWNLOAD MICROCODE
Note:
1.
See the Appendix for details on the sector data returned after issuing an IDENTIFY DEVICE command.
September 2013
Order Number: 329280-002US
Product Specification
17
Intel® Solid-State Drive 530 Series (mSATA)
5.2
Power Management
The Intel SSD 530 Series supports several power management feature sets as defined by the ATA
specification: general Power Management feature set, Advanced Power Management feature set, and
Power-Up in Standby (PUIS) feature set.
The Advanced Power Management and PUIS features can be enabled or disabled using the SET
FEATURES command.
The Power Management feature set includes the following commands:
•
CHECK POWER MODE
•
IDLE
•
IDLE IMMEDIATE
•
SLEEP
•
STANDBY
•
STANDBY IMMEDIATE
5.3
Security Mode Feature Set
The Intel SSD 530 Series supports the Security Mode command set, which consists of:
•
SECURITY SET PASSWORD
•
SECURITY UNLOCK
•
SECURITY ERASE PREPARE
•
SECURITY ERASE UNIT
− Normal Mode – Full NAND erase of user available space and spare area
− Enhanced Mode – Cryptographically erase data
•
SECURITY FREEZE LOCK
•
SECURITY DISABLE PASSWORD
Product Specification
18
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
5.4
SMART Command Set
The Intel SSD 530 Series supports the SMART command set, which consists of:
•
SMART READ DATA
•
SMART READ ATTRIBUTE THRESHOLDS
•
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
•
SMART SAVE ATTRIBUTE VALUES
•
SMART EXECUTE OFF-LINE IMMEDIATE
•
SMART READ LOG SECTOR
•
SMART WRITE LOG SECTOR
•
SMART ENABLE OPERATIONS
•
SMART DISABLE OPERATIONS
•
SMART RETURN STATUS
5.4.1
SMART Attributes
Table 12 lists the SMART attributes supported by the Intel SSD 530 Series; Table 13 lists the
corresponding status flags and threshold settings.
Table 12: SMART Attributes
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
05h
Re-allocated Sector Count
The raw value of this attribute shows the
number of retired blocks since leaving the
factory (grown defect count).
1
1
0
0
1
0
0 (none)
09h
Power-On Hours Count
The raw value reports two values: the first
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hours reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
1
1
0
0
1
0
0 (none)
0Ch
Power Cycle Count
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
1
1
0
0
1
0
0 (none)
AAh
Available Reserved Space
1
1
0
0
1
1
10
September 2013
Order Number: 329280-002US
Product Specification
19
Intel® Solid-State Drive 530 Series (mSATA)
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
ABh
Program Fail Count
The raw value of this attribute shows total
count of program fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable program fails.
1
1
0
0
1
0
0 (none)
ACh
Erase Fail Count
The raw value of this attribute shows total
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
1
1
0
0
1
0
0 (none)
AEh
Unexpected Power Loss
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
1
1
0
0
1
0
0 (none)
B7h
SATA Downshift Count
The count of the number of times SATA
interface selected lower signaling rate due
to error.
1
1
0
0
1
0
0 (none)
1
1
0
0
1
1
90
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
B8h
BBh
BEh
C0h
C7h
End-to-End Error Detection Count
Reports number of errors encountered
during end-to-end error detection within the
SSD data path.
Uncorrectable Error Count
The raw value shows the count of errors that
could not be recovered using Error
Correction Code (ECC).
Temperature
Reports real-time temperature of drive as
measured by temperature sensor on drive PCB.
The normalized value reports the current
temperature value. The raw value shows current,
lifetime highest and lifetime lowest
temperatures. Byte 1:0 = current temp Celsius;
Byte 3:2 = lifetime highest temp Celsius; Byte
5:4 = lifetime lowest temp Celsius.
Power-Off Retract Count (Unsafe Shutdown
Count)
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device. An
unsafe shutdown occurs whenever the device is
powered off without STANDBY IMMEDIATE being
the last command.
CRC Error Count
The total number of encountered SATA interface
cyclic redundancy check (CRC) errors.
Product Specification
20
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
ID
E1h
E2h
E3h
E4h
E8h
E9h
F1h
F2h
F9h
Attribute
Host Writes
The raw value of this attribute reports the total
number of sectors written by the host system.
The raw value is increased by 1 for every 65,536
sectors (32 MB) written by the host.
Timed Workload Media Wear
Measures the wear seen by the SSD (since reset
of the workload timer, attribute E4h), as a
percentage of the maximum rated cycles.
Timed Workload Host Read/Write Ratio
Shows the percentage of I/O operations that are
read operations (since reset of the workload
timer, attribute E4h).
Timed Workload Timer
Measures the elapsed time (number of minutes
since starting this workload timer).
Available Reserved Space
This attribute reports the number of reserve
blocks remaining. The normalized value begins at
100 (64h), which corresponds to 100 percent
availability of the reserved space. The threshold
value for this attribute is 10 percent availability.
Media Wearout Indicator
This attribute reports the number of cycles the
NAND media has undergone. The normalized value
declines linearly from 100 to 1 as the average
erase cycle count increases from 0 to the
maximum rated cycles.
Once the normalized value reaches 1, the number
will not decrease, although it is likely that
significant additional wear can be put on the
device.
Total LBAs Written
The raw value of this attribute reports the total
number of sectors written by the host system.
The raw value is increased by 1 for every 65,536
sectors (32 MB) written by the host.
Total LBAs Read
The raw value of this attribute reports the total
number of sectors read by the host system. The
raw value is increased by 1 for every 65,536
sectors (32 MB) read by the host.
Total NAND Writes
Raw value reports the number of writes to NAND
in 1 GB increments.
September 2013
Order Number: 329280-002US
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
1
10
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
Product Specification
21
Intel® Solid-State Drive 530 Series (mSATA)
Table 13: SMART Attribute Status Flags
Status Flag
Description
SP
EC
ER
PE
Self-preserving attribute
Event count attribute
Error rate attribute
Performance attribute
OC
Online collection attribute
PW
Pre-fail warranty attribute
5.4.2
Value = 0
Not a self-preserving attribute
Not an event count attribute
Not an error rate attribute
Not a performance attribute
Collected only during offline
activity
Advisory
Value = 1
Self-preserving attribute
Event count attribute
Error rate attribute
Performance attribute
Collected during both
offline and online activity
Pre-fail
SMART Logs
The Intel SSD 530 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h.
The Intel SSD 530 Series implements host vendor specific logs (addresses 80h-9Fh) as read and write
scratchpads, where the default value is zero (0). Intel SSD 530 Series does not write any specific
values to these logs unless directed by the host through the appropriate commands.
The Intel SSD 530 Series also implements a device vendor specific log at address A9h as a read-only
log area with a default value of zero (0).
5.5
Device Statistics
In addition to the SMART attribute structure, statistics pertaining to the operation and health of the
Intel SSD 530 Series can be reported to the host on request through the Device Statistics log as
defined in the ATA specification.
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is
accessible using READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
The table below lists the Device Statistics supported by the Intel SSD 530 Series.
Table 14: Device Statistics Log
Page
0x00
0x01 - General
Statistics
Offset
0x08
0x10
0x18
0x28
0x08
0x04 - General
Errors Statistics
0x10
0x06 Transport
Statistics
0x08
0x10
0x18
0x07 - Solid
State Device
Statistics
0x08
Product Specification
22
Description
List of Supported Pages
Power Cycle Count
Power-On Hours
Logical Sectors Written
Logical Sectors Read
Num Reported Uncorrectable
Errors
Num Resets Between
Command Acceptance and
Completion
Num Hardware Resets
Num ASR Events
Num Interface CRC Errors
Percentage Used Endurance
Indicator
Equivalent SMART attribute if applicable
0Ch
09h
E1h
F2h
BBh
E9h
This statistic counts up from 0 rather than down
from 100, and may go beyond 100 for drives that
exceed their expected lifetime.
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
5.6
SMART Command Transport
With SMART Command Transport (SCT), a host can send commands and data to an SSD and receive
status and data from an SSD using standard write/read commands to manipulate two SMART Logs:
•
Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status
•
Log Address E1h ("SCT Data Transfer") — used to transport data
5.7
Data Set Management Command Set
The Intel SSD 530 Series supports the Data Set Management command set Trim attribute, which
consists of:
•
DATA SET MANAGEMENT
5.8
•
•
•
•
Host Protected Area Command Set
READ NATIVE MAX ADDRESS
SET MAX ADDRESS
READ NATIVE MAX ADDRESS EXT
SET MAX ADDRESS EXT
5.9
48-Bit Address Command Set
The Intel SSD 530 Series supports the 48-bit Address command set, which consists of:
•
FLUSH CACHE EXT
•
READ DMA EXT
•
READ NATIVE MAX ADDRESS
•
READ NATIVE MAX ADDRESS EXT
•
READ SECTOR(S) EXT
•
READ VERIFY SECTOR(S) EXT
•
SET MAX ADDRESS EXT
•
WRITE DMA EXT
•
WRITE MULTIPLE EXT
•
WRITE SECTOR(S) EXT
5.10
General Purpose Log Command Set
The Intel SSD 530 Series supports the General Purpose Log command set, which consists of:
•
READ LOG EXT
•
WRITE LOG EXT
•
READ LOG DMA EXT
•
WRITE LOG DMA EXT
5.11
•
•
Native Command Queuing
READ FPDMA QUEUED
WRITE FPDMA QUEUED
September 2013
Order Number: 329280-002US
Product Specification
23
Intel® Solid-State Drive 530 Series (mSATA)
5.12
Software Settings Preservation
The Intel SSD 530 Series supports the SET FEATURES parameter to enable/disable the preservation of
software settings.
5.13
SATA Link Power Management (LPM)
The Intel SSD 530 Series supports the SET FEATURES parameter to enable Device Initiated Power
Management (DIPM). The SSD also supports Host Initiated Power Management (HIPM).
Product Specification
24
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
6
Certifications and Declarations
The table below describes the Device Certifications supported by the Intel SSD 530 Series.
Table 15: Device Certifications and Declarations
Certification
CE Compliant
UL Certified
Description
European Economic Area (EEA): Compliance with the essential requirements of EC
Council Directives Low Voltage Directive (LVD) 2006/95/EC, EMC Directive
2004/108/EC and Directive 2011/65/EU.
Certified Underwriters Laboratories, Inc. Bi-National Component Recognition; UL
60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment - Safety - Part
1: General Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology
Equipment - Safety - Part 1: General Requirements)
C-Tick Compliant
Compliance with the Australia/New Zealand Standard AS/NZS3548 and
Electromagnetic Compatibility (EMC) Framework requirements of the Australian
Communication Authority (ACA).
BSMI Compliant
Compliance to the Taiwan EMC standard CNS 13438: Information technology
equipment - Radio disturbance Characteristics - limits and methods of measurement,
as amended on June 1, 2006, is harmonized with CISPR 22: 2005.04.
KCC
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility
Control Regulation and meets the Electromagnetic Compatibility (EMC) Framework
requirements of the Radio Research Laboratory (RRL) Ministry of Information and
Communication Republic of Korea.
Microsoft WHCK
Microsoft Windows Hardware Certification Kit
RoHS Compliant
Restriction of Hazardous Substance Directive
VCCI
Voluntary Control Council for Interface to cope with disturbance problems caused by
personal computers or facsimile.
SATA-IO
Indicates certified logo program from Serial ATA International Organization.
Low Halogen
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in
the final product. Intel components as well as purchased components on the finished
assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21
requirements. The replacement of halogenated flame retardants and/or PVC may not
be better for the environment.
September 2013
Order Number: 329280-002US
Product Specification
25
Intel® Solid-State Drive 530 Series (mSATA)
7
Appendix
The table below describes the sector data returned from an identify device command
Table 16: Identify Device Returned Sector Data
Word
0
F = Fixed
V = Variable
X = Both
F
Default Value
Description
0040h
General configuration bit-significant information
1
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
2
V
C837h
Specific configuration
3
X
0010h
Obsolete - Number of logical heads (16)
4-5
X
0h
Retired
6
X
003Fh
Obsolete - Number of logical sectors per logical track (63)
7-8
V
0h
Reserved for assignment by the CompactFlash* Association
(CFA)
9
X
0h
Retired
10-19
F
varies
Serial number (20 ASCII characters)
20-21
X
0h
Retired
22
X
0h
Obsolete
23-26
F
varies
Firmware revision (8 ASCII characters)
27-46
F
varies
Model number (Intel® Solid-State Drive)
47
F
8010h
7:0—Maximum number of sectors transferred per interrupt
on multiple commands
48
F
4000h
Reserved
49
F
2F00h
Capabilities
50
F
4000h
Capabilities
51-52
X
0h
Obsolete
53
F
0007h
Words 88 and 70:64 valid
54
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
55
X
0010h
Obsolete - Number of logical heads (16)
56
X
003Fh
Obsolete - Number of logical sectors per logical track (63)
57-58
X
00FBFC10h
Obsolete
59
V
0110h
Number of sectors transferred per interrupt on multiple
commands
60-61
F
varies
Total number of user-addressable sectors
62
X
0h
Obsolete
63
F
0007h
Multi-word DMA modes supported/selected
64
F
0003h
PIO modes supported
65
F
0078h
Minimum multiword DMA transfer cycle time per word
66
F
0078h
Manufacturer’s recommended multiword DMA transfer cycle
time
67
F
0078h
Minimum PIO transfer cycle time without flow control
68
F
0078h
Minimum PIO transfer cycle time with IORDY flow control
Product Specification
26
September 2013
Order Number: 329280-002US
Intel® Solid-State Drive 530 Series (mSATA)
Word
69
F = Fixed
V = Variable
X = Both
F
4010h
Additional Supported
70
F
0h
Reserved
71-74
F
0h
Reserved for IDENTIFY PACKET DEVICE command
75
F
001Fh
Queue depth
76
F
270Eh
Serial ATA capabilities
77
F
0086h
Reserved for future Serial ATA definition
78
F
054Ch
Serial ATA features supported
79
V
0040h
Serial ATA features enabled
80
F
03FCh
Major version number
81
F
FFFFh
Minor version number
82
F
746Bh
Command set supported
83
F
7429h
Command sets supported
84
F
6163h
Command set/feature supported extension
85
V
7469h
Command set/feature enabled
86
V
B409h
Command set/feature enabled
87
V
6163h
Command set/feature default
88
V
407Fh
Ultra DMA Modes
89
F
0002h
Time required for security erase unit completion
90
F
0001h
Time required for enhanced security erase completion
91
V
00FEh
Current advanced power management value
92
V
FFFEh
Master Password Revision Code
93
F
0h
94
V
0h
95
F
0h
Stream minimum request size
96
V
0h
Streaming transfer time - DMA
97
V
0h
Streaming access latency - DMA and PIO
98-99
F
0h
Streaming performance granularity
100-103
V
varies
Maximum user LBA for 48-bit address feature set
104
V
0h
Streaming transfer time - PIO
105
F
0001h
Reserved
106
F
4000h
Physical sector size / logical sector size
107
F
0h
Inter-seek delay for ISO-7779 acoustic testing in
microseconds
108-111
F
varies
Unique ID
112-115
F
0h
Reserved for world wide name extension to 128 bits
116
V
0h
Reserved for technical report
117-118
F
0h
Words per logical sector
119
F
401Ch
Supported settings
120
F
401Ch
Command set/feature enabled/supported
September 2013
Order Number: 329280-002US
Default Value
Description
Hardware reset result: the contents of bits (12:0) of this
word shall change only during the execution of a hardware
reset
Vendor’s recommended and actual acoustic management
value
Product Specification
27
Intel® Solid-State Drive 530 Series (mSATA)
Word
121-126
F = Fixed
V = Variable
X = Both
F
Default Value
Description
0h
Reserved
127
F
0h
Removable Media Status Notification feature set support
128
V
0021h
Security status
129-159
X
varies
Vendor-specific
160
F
0h
CompactFlash Association (CFA) power mode 1
161-168
X
0h
Reserved for assignment by the CFA
169
X
0001h
Data set management Trim attribute support
170-173
F
0h
Additional Product Identifier
174-175
F
0h
Reserved
176-205
V
0h
Current media serial number
206
X
0025h
SCT Command Transport
207-208
X
0h
Reserved
209
X
4000h
Alignment of logical blocks within a physical block
210-211
X
0h
Write-Read-Verify Sector Count Mode 3 (DWord)
212-213
X
0h
Write-Read-Verify Sector Count Mode 2 (DWord)
214
X
0h
NV Cache Capabilities
215-216
X
0h
NV Cache Size in Logical Blocks (DWord)
217
X
0001h
Nominal media rotation rate
218
X
0h
Reserved
219
X
0h
NV Cache Options
220
X
0h
Write-Read-Verify feature set
221
X
0h
Reserved
222
X
103Fh
Transport major version number
223
X
0h
Transport minor version number
224-229
X
0h
Reserved
230-233
X
0h
Extended Number of User Addressable Sectors (QWord)
234
X
0002h
235
X
0400h
236-254
X
0h
Reserved
255
X
varies
Integrity word
Minimum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
Maximum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
Note:
F = Fixed. The content of the word is fixed and does not change. For removable media devices, these values
may change when media is removed or changed.
V = Variable. The state of at least one bit in a word is variable and may change depending on the state of the
device or the commands executed by the device.
X = F or V. The content of the word may be fixed or variable.
Product Specification
28
September 2013
Order Number: 329280-002US
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement