Delta 28-190 band saw Instruction manual

Below you will find brief information for band saw 28-190. This manual will guide you through assembling, operating, and maintaining the saw. It outlines safety precautions, blade tension and tracking adjustments, table tilting, and blade changing procedures. The manual also provides specifications for the saw, including motor size and speed, table dimensions, blade width and length, and cutting capacities.

PDF Download
Document
Delta Band Saw 28-190 Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 12" cutting capacity
  • 46º right / 3º left table tilt
  • 1/4" wide, 82" long saw blade
  • Upper and lower blade guides
  • Dust chute for vacuum connection

Frequently asked questions

Loosen the wing nut behind the tension knob, turn the knob clockwise to increase tension or counter-clockwise to decrease tension, then tighten the wing nut.

Loosen the wing nut on the tracking knob, slowly rotate the upper wheel by hand, and adjust the knob clockwise or counter-clockwise until the blade is centered. Tighten the wing nut when finished.

Disconnect the saw from power. Open the upper and lower wheel guards, release blade tension, remove table alignment screw and insert, and slide the blade off the wheels.
Preparing document for printing…
0%