Sharp TUT2HR32 Blu-Ray / DVD Operation Manual
Reklamë
Reklamë
+
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Important: This product can only receive Digital Terrestrial TV signals, subject to coverage an aerial upgrade may be required.
Text your postcode followed by your house name or number to
83331* or go to www.freeview.co.uk/availability (*Costs no more than a normal text).
1
2
Read this operation manual carefully.
If you still encounter a problem, please call our service help line on 0845 880 0421 during normal weekday office hours.
OPERATION MANUAL
ENGLISH
•
•
The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.
The examples used throughout this manual are based on the TU-T2HR32 model.
Dear SHARP customer
Thank you for your purchase of the SHARP Digital Terrestrial HD Recorder. To ensure safety and many years of troublefree operation of your product, please read Important safety precautions carefully before using this product.
Contents
Contents ...................................................................... 2
Introduction ................................................................. 3
Important safety precautions ................................. 3
Remote control unit .............................................. 4
Recorder (front view) ............................................. 5
Recorder (rear view) .............................................. 5
Preparation.................................................................. 6
Supplied accessories ............................................ 6
Inserting the batteries............................................ 7
Using the remote control unit ................................ 7
Quick guide ................................................................. 8
Initial installation overview...................................... 8
Before turning on the power ................................. 9
Initial auto installation ............................................ 9
Watching TV .............................................................. 10
Daily operation .................................................... 10
Channel List ........................................................ 11
Selecting a programme using the EPG ................ 12
Digital text ........................................................... 13
Recording TV ............................................................ 14
Recording a programme ..................................... 14
Playing a recorded programme ........................... 14
Library ................................................................ 14
Connecting external devices ................................... 15
Video connections .............................................. 15
Audio connections .............................................. 17
Menu operation......................................................... 18
What is the MAIN MENU? ................................... 18
Basic adjustment ...................................................... 19
AV Settings ......................................................... 19
Languages .......................................................... 21
Parental Control .................................................. 22
Freeview+ ........................................................... 23
General ............................................................... 24
Library ................................................................ 26
Scheduled Recordings ........................................ 26
Appendix ................................................................... 27
Troubleshooting .................................................. 27
Specifications ..................................................... 28
PIN CODE reminder ............................................ 29
Trademarks ......................................................... 29
End of life disposal .............................................. 30
Digital Switchover and Your TV Equipment .......... 31
2
Introduction
Important safety precautions
•
•
•
•
•
•
•
•
•
•
•
•
Cleaning—Unplug the AC power adapter from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
Use a soft damp cloth to gently wipe the product when it is dirty. To protect the product, do not use a chemical cloth to clean it.
Chemicals may cause damage or cracks in the casing of the product.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, or table recommended by the manufacturer or sold with the product.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.
TU-T2HR32
HD
Ventilation—The vents and other openings in the casing are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heatgenerating products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the product.
To prevent fire or shock hazard, do not place the AC power adapter under the product or other heavy items.
The product uses power even in Standby. Unplug the product from the AC outlet when you are not using it.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified person to perform servicing.
TU-T2HR32
HD
Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN 60728-11).
NOTE
•
For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to television distribution systems.
3
Introduction
Remote control unit
1
2
MUTE
Volume on/off.
NUMERIC BUTTONS
Set the channel
Enter desired numbers
Set the page in Digital Text Mode.
3
4
5
6
REC
Record selection (Page 14).
PLAYBACK NAVIGATION
Play, Pause, Stop, Fast Fwd
Fast Rwd, Skip Fwd, Skip Rwd.
CURSOR
Select a desired item on the “MENU” screen (Page 18).
GUIDE
Display the EPG.
7 VOLUME
Increase/decrease the volume (Page 10).
8 MENU
“MENU” screen on/off (Page 18).
9 BACK
Return to the previous “MENU” screen.
0 TEXT
Display Digital Text (Page 13).
Q SUBT
Switch subtitles on/off (Page 21).
W AD
Switch Audio Description on/off (Page 21).
E A/V
Switch to HDMI output or SCART output (Page 10).
R HDMI
Hold this button down for 5 seconds to revert the output to 1080i (Page 19).
T LIBRARY
Display “LIBRARY” information (Page 26).
Y STANDBY/ON
Switch between Standby and On (Page 10).
U LAST
Toggle between the current channel and the previous channel (Page 10).
I PROG
Select the programme.
O INFO
Display programme information (Page 10).
P EXIT
Exit the “MENU” screen.
A COLOUR BUTTONS
The colour buttons are correspondingly used to select the coloured item on the screen e.g. Digital Text.
S AUDIO
Select the desired audio language.
D WIDE
Select a wide mode (Page 19).
2
3
1
MUTE
1
4
7
REC
LIBRARY
2
5
8
0
3
6
9
LAST
4
15
16
17
5
6
7
8
9
10
11
12
13
14
OK
+
VOL
–
BACK
TEXT
GUIDE
+
PROG
–
MENU
INFO
EXIT
AD
A/V
SUBT
HDMI
AUDIO
WIDE
18
19
20
21
22
23
4
Introduction
Recorder (front view)
TU-T2HR32
+
HD
1
Recorder (rear view)
1 2 3
RF IN RF OUT
ETHERNET
DOLBY
HIGH DEFINITION MULTIMEDIA INTERFACE
HDMI
7 8
TV
VCR
9
2
4 5
SPDIF
OPTICAL
10
RS-232
USB
DC 12V DC IN
-
+
11 12
6
1
2 a (Power button)
Display
6
7
8
9
10
11
1
2
3
4
5
12
RF IN (Antenna in) terminal
RF OUT (Antenna out) terminal
TV (SCART) terminal
SPDIF (Digital audio output) terminal
USB terminal - (For service only)
Cooling fan outlet
Ethernet terminal
HDMI terminal
VCR (SCART) terminal
Optical (infra red) terminal
RS232 terminal - (For service only)
12V DC terminal
5
Preparation
Supplied accessories
Remote Control Unit ( x 1)
MUTE LIBRARY
4
1
7
REC
0
8
5
2
9
LAST
6
3
Power Adaptor ( x 1)
OK
+
VOL
–
BACK
TEXT
GUIDE
+
PROG
–
MENU
INFO
EXIT
AD
A/V
SUBT
MENU
AUDIO
WIDE
Page 4
•
•
Operation manual (this publication)
“AAA” size zinc-carbon battery (x2) Page 7
Page 9
RF Cable ( x 1)
Page 9
6
Preparation
Inserting the batteries
Before using the Recorder for the first time, insert the two supplied “AAA” size zinc-carbon batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
1
Open the battery cover.
2
Insert the two supplied “AAA” size zinccarbon batteries.
•
Place batteries with their terminals corresponding to the
(e) and (f) indications in the battery compartment.
-
3
Close the battery cover.
-
+
+
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
•
•
•
•
•
•
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the front of the Recorder. Objects between the remote control unit and sensor may prevent proper operation.
TU-T2HR32
+ HD
Remote control sensor
MUTE LIBRARY
REC LAST
OK
VOL
GUIDE
PROG
MENU
BACK
TEXT
INFO
EXIT
A/V
AD
SUBT
MENU
AUDIO
WIDE
Cautions regarding the remote control unit
•
•
•
Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.
Do not place the remote control unit under direct sunlight. The heat may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of the Recorder is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the Recorder, or operate the remote control unit closer to the remote control sensor.
TU-T2HR32
OK
BACK
TEXT
VOL GUIDE
PROG
MENU
INFO
EXIT
A/V
SUBT
MENU WIDE
AUDIO
MUTE
LIBRARY
REC
LAST
HD
7
Quick guide
Initial installation overview
Follow the steps below one by one when using the Recorder for the first time.
Preparation
Run the initial settings
Watch TV
n
Connect the antenna cable to the RF IN terminal (Page 9).
RF IN RF OUT
ETHERNET o
Connect the Recorder to your TV using the supplied HDMI cable
(Page 9).
n
Turn on the power using the a button on the Recorder
(Page 10).
o
Run the first time installation
(Page 9).
✔
Ensure the antenna is connected
First Time Installation
Please ensure that an aerial is connected
Then press
OK to scan for services
IN RF OUT
DOLBY
HIGH DEFINITION MULTIMEDIA INTERFACE
HDMI
ETHERNET
TV
VCR
SPDIF
OPTICAL RS-232
USB
DC 12V DC IN
+ n
Congratulations!
Now you can watch TV.
o
If necessary, adjust the antenna to attain maximum signal reception.
Connect external devices
n
Connect external devices such as a DVD player/ recorder as instructed
(Page 15).
TU-T2HR32
HD
✔
Press OK to continue
Start searching channels o
Connect external audio devices such as speakers/ amplifier as instructed
(Page 17).
CB/PB CR/PR
HDMI
2-CH AUDIO OUT
COAXIAL VIDEO
VIDEO OUT / DIGITAL AUDIO OUT
S-VIDEO p
Connect the power adapter to the Recorder (Page 9).
TU-T2HR32
HD
8
Quick guide
Before turning on the power
n
RF IN RF OUT
ETHERNET
DOLBY
HIGH DEFINITION MULTIMEDIA INTERFACE
HDMI o
VCR
TV
SPDIF
OPTICAL RS-232
USB
DC 12V DC IN
-
+ p n
Connect the antenna (standard DIN45325 plug (IEC 169-2)
75 q coaxial cable) o p
Connect the HDMI cable
Connect the p ower adapter
Place the TV close to the AC outlet, and keep the power plug within reach.
Initial auto installation
When the Recorder is powered on for the first time after purchase, the first time installation screen appears. Follow the on-screen instructions to search for all available channels.
Confirm the following before turning on the power
E
E
E
Is the antenna cable connected?
Is the power adapter connected and plugged in?
Is the HDMI cable connected between the Recorder and your TV?
1
Press a on the Recorder.
•
The first time installation screen is displayed.
Ensure the antenna cable is connected.
2
3
Press OK to start the channel search.
•
The Recorder will search for, sort and store all receivable channels.
NOTE
• The first time installation process will be aborted if the
•
Recorder is left unattended for more than 30 minutes before searching for channels.
After the first time installation has been completed, the default PIN is automatically set to ‘0000’. To change the PIN setting, refer to Page 22.
First Time Installation
Please ensure that an aerial is connected
Then press
OK to scan for services
9
Watching TV
Daily operation
Switching on/off
Standby mode
E
Select standby mode
If the Recorder is switched on, you can switch it to standby by pressing a on the remote control unit.
E
Switching on from standby
From standby, press a on the remote control unit.
MUTE LIBRARY
NOTE
•
•
If you are not going to use this Recorder for long periods of time, be sure to remove the power adapter from the supply.
(Page 9).
A small amount of electric power is still consumed with the
Recorder in standby mode.
Adjusting the volume
Press the VOL+ button to increase the volume and the
VOL- button to decrease the volume.
Changing channels
With PROG +/-:
+
VOL
–
GUIDE
+
PROG
–
MENU
INFO
With 0
_9:
1
2
4
5
7
8
REC
0
9
LAST
3
6
BACK
Switching between channels
Switch between the current channel and the previous channel by pressing LAST. Each press of the LAST button will toggle between the current channel and the previous channel.
1
Programme information
2
Press the INFO button once to display times, channel, programme, start and finish dates.
Press the INFO button again to display additional information about the current programme.
VOL PROG
– –
MENU
BACK INFO
TEXT EXIT
Selecting a video output source
Once the Recorder is connected to your TV using either a HDMI cable or SCART cable, you can select the appropriate output source by pressing A/V on the remote control unit.
Selecting an audio language
Some programmes are broadcast with multiple audio channels. Press AUDIO to display the audio menu.
INFORMATION
Select the audio channel that you want to use.
ENG
ENG
Stereo
Stereo
Audio Channel
Up Down OK Select Exit Exit Menu
1
2
Press a/b to select the desired channel.
Press OK to confirm the audio channel.
10
Watching TV
Channel List
Basic operation
E
Display/close the Channel guide
1
2
3
Press Menu.
Press a/b to select channels setting.
Press OK.
VOL PROG
– –
MENU
BACK INFO
Channels
005
006
007
008
009
All Channels
001 BBC 1
BBC 2 002
003
004
ITV1
CHANNEL 4
FIVE
ITV2
BBC THREE
BBC FOUR
ITV3
OK
Watch EXIT Exit Menu Lock
Add Fav
Delete
Show Favs
GUIDE Guide
1 2 3 4 5 6
E
Navigating the Channel guide
1
Select a channel
Press a/b to select a channel. Press OK to watch the current programme.
Useful functions
2
Lock a channel
You can lock a channel to prevent children viewing scenes of a violent or sexual nature.
PIN Required
You have chosen to lockunlock a channel
1
2
Press a/b to select the channel you want to lock.
Press the RED coloured button. A screen is displayed requesting a PIN entry. Enter a
4-digit code, then press .
NOTE
•
•
If parental controls are enabled (Page 22), the parental settings
PIN must be entered before a channel can be locked/unlocked.
To unlock a channel, select the channel using the a/b buttons and press the RED coloured button. Enter the PIN, then press
EXIT
.
3
Set a channel as a favourite
1
2
You can set a channel as a favourite for quick access. All favourite channels will be displayed in the favourites list.
Press a/b to select the channel you want to add to the favourites list.
Press the GREEN coloured button.
• The favourites list will be shown listing all favourite channels and the channel you have just added.
Press c to return to the channel list.
3
NOTE
•
To delete a channel from the favourites list, press the YELLOW coloured button. You can choose to delete the channel or cancel.
4
Deleting a channel
1
2
Press a/b to select the channel you want to delete.
Press the YELLOW coloured button.
• The delete channel screen will be displayed. You can choose to delete the channel or cancel.
NOTE
•
To view a channel once it has been deleted, you will need to perform a first time installation (Page 9).
5
Viewing the Favourites List
1
Press d to view the favourites list
• While viewing the favourite list, you can select and watch channels in the same way as the Channel List.
2
6
Press c to return to the channel list.
View the EPG
1
To view the EPG (Page 12), press the GUIDE button.
- - - -
Please enter the PIN
0 9 Enter PIN EXIT Exit
11
Watching TV
Selecting a programme using the
EPG
Basic operation
E
Display/close the EPG screen
Press GUIDE.
+ +
GUIDE
VOL PROG
1 5 1
Programme Guide
Royal Ascot 9.00pm - 10.00pm
2/5. Clare Baldingpresents day two of Royal Ascot. The feature race is The Pronce of Wale’s Stakes at
3:50pm. Willie Carson and Rishi Persad are on hand with news and interviews. [S]
[SPORT]
SUB
Wed 16 Jun
001 BBC ONE
002
003
BBC TWO
ITV1
004 Channel 4
005
006
007
009
FIVE
ITV2
BBC THREE
BBC FOUR
S
4:000pm
MOTD Live : Spain vSwitzerland
Royal Ascot
Midsummer Murders
Count Deal or No Deal
Little Girl Lost
Loose Women
This is BBC Three
This is BBC Three
5:00pm 6:00pm
R
The Weakest Link
The Chase
The Hairy Bikers’ Food Tour of
The 5 o’clock Show
Five News
The Ricki Lake Show
Neighbours
Judge Judy
OK
Watch Exit Exit Menu -2 Hrs +2 Hrs -24 hrs +24 hrs R Record LIB Library
3 2 2 2 2
E
Select a programme
1
Select the desired programme
Press a/b to select the desired programme.
• If a or b are displayed on the left of the services, continue to Press
a / b to display the next or previous screen.
Useful functions
2
Navigate the time span
1
2
3
4
Press the RED coloured button to move backwards 2 hours.
Press the GREEN coloured button to move forwards 2 hours.
Press the YELLOW coloured button to move backwards 24 hours.
Press the BLUE coloured button to move forwards 24 hours.
Watch a programme
3
Watch a programme now
1
2
Press a/b to select a programme.
Press OK to watch the programme.
Set a reminder
Set a reminder for a programme
1
Press a / b/ c / d to select a future programme.
2
Press OK. A clock icon will be shown next to the selected programme.
NOTE
• If you set a reminder, just before the programme start time, a message will appear reminding you that the programme is about to start. You can choose to automatically switch channels or cancel the reminder.
EPG recommendations
Programme Guide
Springwatch 2010 8:00pm - 9:00pm
Chris Packham, Kate Humble and Simon King have the latest on the Springwatch animal dramas. In Dorset,
Simon heads beneath the waves for a live dive. [S]
Wed 16 Jun
001 BBC ONE
002
003
BBC TWO
ITV1
004
005
Channel 4
FIVE
006 ITV2
007
009
BBC THREE
BBC FOUR
I
INFORMATION Recording Recommendation
Your selected programme recommends the following programme is recorded.
Springwatch Unsprung
Accept this recommendation?
OK Accept EXIT Exit Menu
OK
Reminder
EXIT
Exit Menu - 2 Hrs + 2 Hrs - 24 Hrs + 24 Hrs
R
Record
10:00pm
LIB
Library
When you press the REC button on the EPG to record an event, the receiver will check if there is a recommendation for that event.
If there is a recommendation for the event, the receiver will ask you if you want to accept the recommendation.
If you accept the recommendation, it will be scheduled for recording as well as the original event in the EPG on which REC was pressed.
If you do not accept the recommendation (by pressing
BACK or EXIT), only the original event in the EPG on which REC was pressed will be scheduled.
Pressing EXIT will exit the menu without booking the item.
12
Watching TV
Trailer bookings
When the receiver detects a trailer booking suggestion is being broadcast, it will raise the following menu:
Book Me
Buttons for digital text operation
Buttons a / b/ c / d
Coloured buttons
Numeric buttons 0 _9
EXIT / TEXT
Description
Navigate the digital text index page and menu system
Access digital text shortcuts. These are often displayed on the bottom of the page.
Directly select a page.
Exit digital text.
This menu consists of an icon on the screen, indicating that you can press the GREEN coloured button to invoke the trailer booking menu. The icon menu will disappear automatically if you do not press the GREEN coloured button and the broadcast is no longer signalling the trailer booking suggestion.
If you do press the GREEN coloured button, the receiver will show the following menu:
Booking
Four Promo event name (eng)
Eight Promo event name (eng)
Four Promo event name (eng)
OK Book Item EXIT Exit Menu
This menu allows you to select the item to book.
Pressing OK will book the item, placing it in the scheduled recordings list.
Pressing EXIT will exit the menu without booking the item.
Digital text
What is digital text?
Some channels are broadcast with digital text which contains pages of information and entertainment. News, weather, sports information, stock exchange prices and programme previews are among the many services.
Accessing digital text
1
Select a channel which broadcasts digital text.
2
Press
•
•
TEXT or the RED button.
Not all channels broadcast digital text.
You may not be able to receive digital text if you have a poor quality signal.
13
Recording TV
Recording a programme Playing a recorded programme
Record a programme now
Press the REC button on the remote control.
A message will appear briefly to confirm the current recording operation for the selected programme.
NOTE
• The programme being recorded will appear in the Library (see
Page 26).
1
2
3
4
Record a future programme
Press GUIDE.
Press a / b/ c / d to select a programme.
Press the REC button on the remote control.
A black record icon will appear next to the selected programme title.
The scheduled recording will appear in the library where it can be edited/deleted (see
Page 26).
Record multiple/alternative programmes
It is possible to record or schedule two individual programmes at the same time. If you select more than two recordings, you will see an error message:
!
WARNING Recording Clash
Your Freeview+ DTR is already recording two different channels.
What would you like to do?
Record ‘South Africa Walks’ Ehen on Thur 00:20
Switch Recording of ‘Coronation Street’ to Thur 00:10
Switch Recording of ‘Channel 4 News’ to at 20:00
OK Select Exit Exit Menu
1
Play a recorded programme
2
3
From the Library (see Page 26), press a / b/ c / d on the remote control to select a programme you want to watch.
If the programme has not yet been watched, it will start playback from the start of the recording.
If part of the programme has already been watched, the following screen appears:
. i
INFORMATION Resume Playback
You have already watched part of this programme.
Press Blue to watch from the start, or OK to resume playback.
Restart OK Resume Exit Exit Menu
4
Make your selection using the buttons on the remote control.
Stop a recorded programme
To stop playback of a recorded programme, press the
STOP button on the remote control (see Page 4).
1
2
Press a / b/ c / d on the remote control to highlight one of the three options.
Press OK. The screen returns to normal viewing.
Library
Library details
The Library shows a list of the programmes previously recorded and/or currently being recorded (see Page 26).
Library
001 BBC ONE
Breakfast
Deal or No Deal
The Simpsons
EastEnders
Escape to the Country
Royal Ascot
MOTD Live: Spain v Switzerland
Stop
GUIDE
Guide Protect
Wed 16 Jun 2010 BBC ONE
2:38pm - 2:39pm MOTD Live: Spain v Switzerland
Gary Lineker introduces live coverage from Durban. Spain are favourites to win a first-ever World Cup. Switzerland are appearing in their ninth finals. Also in HD. [S]
AD SUB
BBC ONE
Channel 4
Channel 4
BBC ONE
BBC ONE
BBC ONE
BBC ONE
Schedule
15/06
15/06
15/06
15/06
16/06
16/06
16/05
Preview Delete
68% Remaining
Recorded
Viewed
Recorded
Failed
Recorded
Recorded
Recorded
OK
Select
EXIT
Exit Menu
14
Connecting external devices
E
•
•
•
Before connecting ...
Be sure to turn off the Recorder and any external equipment before making connections.
Firmly connect a cable to a terminal or socket.
Carefully read the operation manual of each external device for possible connection types. This also helps you get the best audiovisual quality to maximise the potential of the Recorder and the connected device.
NOTE
•
The cables illustrated in Pages 15 to 17 are commercially available items.
Video connections
HDMI connection
Example of connectable devices
E HD Ready TV
The HDMI connection permits digital video and audio transmission via a connection cable to a TV. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. Analogue to digital conversion is no longer necessary in any connected devices, which would also result in quality losses.
RF IN RF OUT
ETHERNET
DOLBY
HIGH DEFINITION MULTIMEDIA INTERFACE
HDMI
TV
VCR
SPDIF
OPTICAL RS-232
USB
DC 12V DC IN
+ n n
HDMI-certified cable
15
Connecting external devices
SCART connection
Example of connectable devices
E
E
HD Ready TV
DVD Recorder
L Y CB/PB CR/PR
HDMI
R
2-CH AUDIO OUT
COAXIAL VIDEO
VIDEO OUT / DIGITAL AUDIO OUT
S-VIDEO
SCART OUTPUT
RF IN RF OUT
ETHERNET
DOLBY
HIGH DEFINITION MULTIMEDIA INTERFACE
HDMI
TV
VCR
SPDIF
OPTICAL RS-232
USB
DC 12V DC IN
+
16
Connecting external devices
Audio connections
SPDIF connection
Example of connectable devices
E Dolby Digital Surround Sound System
RF IN RF OUT
ETHERNET
DOLBY
HIGH DEFINITION MULTIMEDIA INTERFACE
HDMI
TV
VCR
SPDIF
OPTICAL RS-232
USB
DC 12V DC IN
+
L
R
AUDIO INPUT
CD VCR TV
DIGITAL INPUT
COAX 1 OPTICAL
COAX 2
FR FL C RL
SPEAKER OUTPUT
RR
+
_
ON
POWER
FUSE
T2AL/250V
OFF
AC 230V - 50Hz
E
After connecting
Digital audio output setting
After connecting to a surround sound system with a SPDIF cable, you should set an audio output format compatible with the programme you are watching or the device connected.
17
Menu operation
What is the MAIN MENU?
•
•
You need to call up the on screen display (OSD) to perform settings for the Recorder. The OSD for the settings is called “MAIN MENU”
The “MAIN MENU” enables various settings and adjustments.
Basic operation
Display the MAIN
MENU screen
Press @ and the “MAIN MENU” screen displays.
Main Menu
Programme Guide
Channels
Library
Scheduled Recordings
OK
Watch Exit Exit Menu
Exit the MAIN MENU screen
Press EXIT to exit the MAIN MENU at any time. If you have not pressed ; before exiting, the desired setting will not be changed.
OK
+
VOL
–
BACK
TEXT
GUIDE
+
PROG
–
MENU
INFO
EXIT
Selecting a menu or sub menu
Press a/b to select one of the main menu options. Press d to display the option. Press a/b to select one of the sub menus. Press c/d to display the sub menu. Press c/d to adjust the desired setting and then press ;.
Press BACK to return to the previous menu.
Selecting a sub-menu in the
MAIN MENU
OK
Settings
OK
AV Settings
Languages
Parental Control
Freeview +
General
HDMI Video
HDMI Audio
SCART Output
Screen Size
Menu Transparency
Channel Change Timeout
Audio Desacription Volume
Audio Delay Settings
720p
OK Select Exit Exit Menu
Selecting and adjusting options
Settings
OK
AV Settings
Languages
Parental Control
Freeview +
General
HDMI Video
HDMI Audio
SCART Output
Screen Size
Menu Transparency
Channel Change Timeout
Audio Desacription Volume
Audio Delay Settings
1080p
OK Select Exit Exit Menu
About the guide display
The guide display at the bottom of the MAIN MENU screen shows operations with the OSD.
• The guide display is an operational guide for the remote control unit. The bar will change in accordance with each sub-menu and menu setting.
•
OK Select Exit Exit Menu
Main Menu Options
The MAIN MENU allows you access to various menu screens.
Programme Guide
Channels
Library
Scheduled
Recordings
Settings
Information
Item
View the EPG (Page 12).
View the Channel List (Page 11).
View the Library (Page 26).
View the Scheduled Recordings
(Page 26).
Adjust various settings for the Recorder
(Page 19).
View system and software information for the Recorder
.
18
Basic adjustment
AV Settings
Settings
AV Settings
Languages
Parental Control
Freeview +
General
OK
Select Exit Exit Menu
Default Recording Mode
Add to Start of Recording
Add to End of Recording
Live Pause Length
Skip Forwards Time
Skip Backwards Time
Auto Disk Management
Show Available Space As
Format Hard Disk Drive
AV Settings
HDMI Video
Adjusts the video resolution when the Recorder is connected to your TV using a HDMI cable. This allows you to watch High Definition (HD) TV.
576p
720p
1080i
1080p
Item
Sets the video resolution to 576p.
Sets the video resolution to 720p.
Sets the video resolution to 1080i.
Sets the video resolution to 1080p.
NOTE
•
•
Consult the documentation supplied with your TV to select the correct TV resolution.
If your TV is not HD Ready but has a HDMI socket, select the
576p video resolution.
AV Settings
HDMI Audio
Adjusts the audio output type when the Recorder is connected to surround sound system using a HDMI cable. This allows you to enjoy realistic live sound.
Stereo
Dolby Digital
Item
The Recorder will output Stereo sound when connected to a standard surround sound system using the HDMI cable.
The Recorder will output Dolby Digital surround sound when connected to a compatible surround sound system using the HDMI cable.
NOTE
•
•
Only select Dolby Digital if you have a compatible surround sound system. If you choose this setting with a non-compatible sound system the audio will not be heard.
Not all channels are broadcast with Dolby Digital sound.
AV Settings
SCART Output
Adjusts the video signal type when the Recorder is connected to your TV using a SCART cable.
RGB
Composite
Item
This selects an RGB video signal type.
The video signal will be splits the video output into separate red, green and blue signals to provide the best picture quality.
This selects a composite video signal.
Produces a single composite video signal which provides poor picture quality.
NOTE
•
If your TV is not compatible with RGB signals, select the
Composite video output.
AV Settings
Screen Size
Adjusts the screen size (aspect ratio) between 16:9 widescreen and various 4:3 picture sizes.
16:9 Widescreen
4:3 Widescreen
(16:9)
4:3 Centre Cut Out
4:3 Letterbox (16:9)
Item
Displays a 16:9 widescreen picture.
This ensures the best aspect ratio for widescreen TVs.
In this mode, the picture is stretched towards each side of the screen.
This displays a picture similar to 16:9 widescreen on 4:3 TVs.
Displays a 4:3 picture in the centre of the screen. With some programmes, bars may appear on the left and right hand side of the screen.
Displays a 16:9 picture in the centre of the screen. With some programmes, bars may appear on the top and bottom of the screen.
NOTE
•
•
•
If you have connected the Recorder to a Widescreen TV, you should select the 16:9 Widescreen setting.
The wide mode feature lets you adjust the screen size using the
WIDE button on the remote control unit. Press WIDE to cycle through the available screen sizes while watching TV.
If you have selected 16:9 widescreen in the AV settings menu, the wide mode will have no effect.
19
Basic adjustment
AV Settings
Menu Transparency
This function allows you to adjust the transparency of the
OSDs.
Off
25%
50%
75%
Item
The picture will not be visible behind the OSD.
The picture will be partially visible behind the OSD.
The picture will be mostly visible behind the OSD.
The picture is clearly visible behind the
OSD.
NOTE
•
The menu transparency settings will not affect the “MAIN
MENU”.
AV Settings
Channel Change Timeout
This function allows you to adjust the length of time that information screen is displayed for if no other buttons are pressed
Audio Description
Some programmes are broadcast with audio descriptions
(AD) which provides a voice-over describing visual information such as scenery, body language and facial expressions.
Press AD on the remote control unit to toggle audio description on or off.
NOTE
•
•
If audio description is available for a programme, the AD symbol will be displayed in the Information Screen (Page 10) and the
EPG (Page 12).
When turning the AD function ON or OFF you may notice a brief loss in audio. This is not a fault.
AV Settings
Audio Description Volume
Adjusts the volume of the audio description when available.
AV Settings
Audio Delay Settings
Synchronises the audio and video outputs when the
Recorder is connected to a Dolby Digital Surround Sound
System using the SPDIF (digital audio output) connection.
Digital Audio Delay 60 ms
1
2
Press a/b to increase or decrease the audio delay time.
Press EXIT to complete the setting.
20
Basic adjustment
Languages
Settings
AV Settings
Languages
Parental Control
Freeview +
General
OK
Select
Exit
Exit Menu
Subtitle \Language
Audio Language
Audio Description Language
Languages
Subtitle Language
This function allows you to set the default subtitle language to English, Welsh, Gaelic or Irish.
NOTE
•
Some subtitle languages are available with enhanced subtitles.
These provide additional information about the programme for the hard of hearing.
Switching on subtitles
Press SUBT on the remote control unit to toggle subtitles on or off.
NOTE
• Not all programmes are broadcast with subtitles. If subtitles are
• available for a programme, the SUBT symbol will be displayed in the Information Screen (Page 10) and the EPG (Page 12).
If subtitles are available they will be displayed at the bottom of the screen in the default subtitle language.
Languages
Audio Language
This function allows you to set the default audio language to English, Welsh, Gaelic or Irish.
Selecting audio languages
Press AUDIO on the remote control unit to toggle switch between the available audio languages.
NOTE
•
Not all programmes are broadcast with alternative audio languages. If the selected audio language is not broadcast,
English will be used.
Languages
Audio Description Language
This function allows you to set the default audio description (AD) language to English, Welsh, Gaelic or
Irish.
NOTE
•
Not all programmes are broadcast with alternative audio description languages. If the selected audio description language is not broadcast, English will be used.
21
Basic adjustment
Parental Control
The Parental Control feature allows you to prevent accidental changes being made to the Recorder. In addition channels can be locked to prevent children viewing scenes of a violent or sexual nature.
Parental Settings PIN
Settings
AV Settings
Languages
Parental Control
General
Parental Settings PIN
This menu is PIN protected.
Please enter your PIN to view and change the settings.
OK
Select Exit Exit 0 9 Enter PIN
- - - -
OK Select Exit Exit Menu
The default personal identification number (PIN) must be entered before the parental control settings can be adjusted.
Enter the default four digit PIN (0000) using the 0-9 numeric buttons, then press OK.
NOTE
•
If you have changed the default PIN, this must be entered before the parental control settings can be adjusted.
Parental Control
Guidance PIN for recordings
This function is broadcaster dependant and restricts playback of Guidance flagged content.
Yes
No
Item
This will allow playback to be performed with a PIN entry.
This will allow playback to be performed without a PIN entry.
Parental Control
Allow first time installation
This function allows you to prevent a first time installation being performed without first entering the parental settings PIN.
Enabled
Disabled
Item
This will allow a first time installation to be performed without entering the parental settings PIN.
This will prevent a first time installation to be performed unless the parental settings PIN is entered.
Parental Control
Allow parental changes
This function allows you to prevent changes within the parental control menu without first entering the parental settings PIN.
Enabled
Disabled
Item
This will allow access to the parental control menu without first entering the parental settings PIN.
This will prevent access to the parental control menu unless the parental settings PIN is entered.
Parental Control
Allow Hard Disc Drive format
This function gives the option to allow the hard disc drive to be formatted or not.
Enabled
Disabled
Item
This will allow the Hard Disc Drive to be formatted.
This will prevent the Hard Disc Drive from being formatted.
Parental Control
Change PIN
Settings
AV Settings
Languages
Parental Control
General
PIN Change
Enter old PIN
Enter new PIN
Copnfirm new PIN
OK Select Exit Exit
0 9
Enter PIN
- - - -
- - - -
- - - -
OK Select Exit Exit Menu
This function allows you to change the PIN.
E
Changing the parental settings PIN.
1
2
3
Enter the default (0000) or current four digit
PIN using the 0-9 numeric buttons.
Enter the new four digit PIN using the 0-9 numeric buttons.
Confirm the new four digit PIN using the 0-9 numeric buttons.
NOTE
• As a precautionary measure, make a note of your PIN on the back of this operational manual, cut it out and keep it in a safe place that children cannot reach.
22
Basic adjustment
Freeview+
Settings
AV Settings
Languages
Parental Control
Freeview +
General
OK
Select Exit Exit Menu
Default Recording Mode
Add to Start of Recording
Add to End of Recording
Live Pause Length
Skip Forwards Time
Skip Backwards Time
Auto Disk Management
Show Available Space As
Format Hard Disk Drive
Freeview+
Default Recording Mode
This function allows you to select the mode for recording programmes when recording from a SD channel and the same programme is available in HD.
Always Ask
High Definition
Standard Definition
Item
Whenever recording is selected, a message will appear on screen. You can select to record either in High Definition or Standard Definition quality.
Recording is performed in
High Definition.
Recording is performed in
Standard Definition.
Freeview+
Live Pause Length
This allows you to set a time limit that a Live TV programme can be paused. This can be either 60 or 120 minutes duration.
Freeview+
Skip Forwards Time
This function allows you to set a time interval for skipping forwards through a recorded programme. This can be selected from either 10, 30, 40 or 60 seconds.
Freeview+
Skip Backwards Time
This function allows you to set a time interval for skipping backwards through a recorded programme. This can be selected from either 10, 30, 40 or 60 seconds.
Freeview+
Auto Disk Management
When Auto Disk Management is turned on, if the recorder runs out of space whilst recording, old recordings will automatically be deleted to create free space. The internal hard drive can store up to 120 hours of digital TC broadcast (depending on the data rate of the recorded programme, which is set automatically set by the broadcaster).
NOTE
• Occasionally, the Recorder may miss the start or the end of the recording. This is not a fault of the unit, as the broadcaster may have not updated the information.
Freeview+
Show Available Space As
This function allows you to select how much space left on the Hard Disk Drive is displayed on screen.
Percentage of Total
Space
Hours (High
Definition)
Hours (Standard
Definition)
Item
This displays the space remaining as a percentage.
This displays the space left for recording in High Definition.
This displays the space left for recording in Standard Definition.
Freeview+
Format Hard Disk Drive
This function allows you to format the hard disk drive.
NOTE
• Formatting the hard disk drive will erase all recorded programmes.
23
Basic adjustment
General
Settings
AV Settings
Languages
Parental Control
General
OK Select Exit Exit Menu
Auto Standby
Power Save in Standby Mode
Upgrade Software
Auto Retune
Auto Retune Messages
Network Configuration
Manual Tune
First Time Installation
Enabled
General
Auto Standby
This function allows you to automatically switch the
Recorder into standby mode when there is no user activity for 3 hours.
Enabled
Disabled
Item
The Recorder will automatically switch into standby mode when there is no user activity for 3 hours.
The Recorder will remain on constantly unless switched into standby mode by the user.
General
Power Save in Standby Mode
This function allows you to control the power saving features of your Recorder.
Enabled
Disabled
Item
The Recorder uses a very low amount of power when in standby.
Power saving features are disabled.
General
Upgrade Software
This function allows you to control when software upgrades are installed.
Automatic
Manual
Item
The Recorder will automatically install software upgrades when available.
The Recorder will display a message allowing you to confirm or cancel the software upgrade.
General
Auto Retune
This function allows you to control when new services
(channels) are added and stored on the Recorder.
Always Start
Always Ask
Item
Whenever new services (channels) are detected, the Recorder will automatically tune and store them.
Whenever new services (channels) are detected, a message will appear on screen. You can choose to tune and store the new services or cancel the auto retune.
General
Auto Retune Messages
This function controls when retune messages are displayed.
Item
All messages are displayed.
All
No Minor
Messages
Only major messages are displayed.
Information Only
None
Only information messages are displayed.
No messages are displayed.
NOTE
•
During the digital switchover, Auto retune messages may be displayed. Follow the on-screen instructions to retune.
General
Network Configuration
This function allows you to configure the network.
24
Basic adjustment
Manually tuning channels
General
Manual tune
You can manually tune new services after the first time installation has been completed.
Manual Tune
UHF Channel
Frequency (kHz)
Bandwidth
System
42
641787
8MHz
DVBT
Mode
FEC
2K
3/4
Guard
Mod
NID ==== TSID
Systems Found / Added
Tuner Lock
Signal Strength
Signal Quality
OK
Watch
Exit Exit Menu
1/32
QAM16
====
== / ==
Lock
Start Scan
19%
40%
6
7
8
2
3
4
5
You can manually tune new services after the first time installation has been completed.
1
Press c/d to select the desired UHF channel.
Press b to select ‘Frequency (kHz).
Press c/d to adjust the frequency.
Press b to select ‘Bandwidth’.
Press c/d to adjust the ‘bandwidth’
Press b to select ‘System.
Press c/d to select a ‘System’.
Press the BLUE coloured button to start scanning for the specified channel. If the channel is found it will be stored in the
Recorder and will be available in the channel list and EPG.
UHF Channel
Frequency
Bandwidth
System
Item
The channel number you want to save the manually tuned channel as.
The frequency of the service (channel) you are manually tuning.
The bandwidth of the service (channel) you are manually tuning.
The type of tuning system
NOTE
•
You can enter the UHF Channel and Frequency using the 0-9 numeric buttons.
General
First time installation
This function allows you to perform a first time installation
(page 9).
25
Basic adjustment
Library
E
Display/close the LIBRARY screen
Press the LIBRARY button on the remote control or select Library from the Main Menu.
9
Library
001 BBC ONE
Breakfast
Deal or No Deal
The Simpsons
EastEnders
Escape to the Country
Royal Ascot
MOTD Live: Spain v Switzerland
Stop
GUIDE
Guide Protect
Wed 16 Jun 2010
2:38pm - 2:39pm
BBC ONE
MOTD Live: Spain v Switzerland
Gary Lineker introduces live coverage from Durban. Spain are favourites to win a first-ever World Cup. Switzerland are appearing in their ninth finals. Also in HD. [S]
AD SUB
BBC ONE
Channel 4
Channel 4
BBC ONE
BBC ONE
BBC ONE
BBC ONE
Schedule
15/06
15/06
15/06
15/06
16/06
16/06
16/05
Preview Delete
68% Remaining
Recorded
Viewed
Recorded
Failed
Recorded
Recorded
Recorded
OK Select EXIT Exit Menu
1 2 3 4 5 6 7 8
7
Select
Press the OK button on the remote control to make a selection.
8
Exit Menu
Press the EXIT button on the remote control to exit the current screen.
9
Hours Remaining
This displays the available space on the Hard
Disk Drive for recording.
Scheduled Recordings
E
Display/close the Scheduled
Recordings screen
Select Scheduled Recordings from the Main
Menu.
Scheduled Recordings
Wed 16 Jun 2010
5:15pm - 6:00pm
BBC ONE
The Weakest Link
Nine contestants paly as a team to win up to 10,000 pounds. However, only one takes the prize money home; round by round the contestants vote off the weakest link. [S]
SUB
S
001 BBC ONE
The Weakest Link
The Simpsons
Channel 4 News
1 2
South Africa Walks
Breakfast
3
BBC ONE
Channel 4
Channel 4
ITV1
BBC TWO
BBC TWO
BBC ONE
GUIDE
Guide Series Delete
16/06
16/06
16/06
16/06
17/06
17/06
17/06
68% Remaining
Scheduled
Scheduled
Scheduled
Scheduled
Scheduled
Scheduled
Scheduled
4
S
S
S
S
S
S
S
S
S
S
S
S
S
EXIT Exit Menu
1
Stop
This stops playback of a previewed recording, selected with the H button on the remote control.
2
Guide
Press the GUIDE button on the remote control to view the programme guide.
3
Protect
This function allows you to protect a selected recording, selected with the RED button on the remote control. A P will appear on the right hand side in the selected programme row.
4
Schedule
This function takes you to the Scheduled
Recordings menu.
5
Preview
This function allows you to preview a selected recording, selected with the YELLOW button on the remote control.
6
Delete
This function allows you to delete a selected recording, selected with the BLUE button.
1
Guide
Press the GUIDE button on the remote control to view the programme guide.
2
Series
This function lets you select a repeated scheduled recording for recording as a series of programmes. This is selected with the
GREEN button on the remote control.
3
Delete
This function allows you to delete the selected scheduled recording. This is selected with the
BLUE button on the remote control.
4
Exit Menu
Press the EXIT button on the remote control to exit the current screen.
5
Information Row
This row gives the details of the scheduled recording, including the programme title, the channel number, the date of the programme and its current status.
26
Appendix
Troubleshooting
The following conditions in the table below do not always indicate a problem. Please perform the checks described below before calling for service. If the problem can not be corrected by the use of this manual, remove the mains plug from the power socket and contact the Helpline on 0845 880 0421 in order to obtain service or advice.
Where this is not possible please visit our web site www.sharp.co.uk/customersupport.aspx
Customers without Internet access may phone 0845 880 0421 during office hours.
In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide proof of purchase to the repair company. Please keep your purchase invoice or receipt in a safe place.
WARNING
Under no circumstances should you try and repair this product yourself. This will invalidate the warranty. Do not open the unit as there is risk of electric shock.
•
No power.
Problem
•
The Recorder cannot be operated.
•
Remote control unit does not operate.
•
•
Picture is cut off.
Power is suddenly turned off.
•
No picture.
•
No sound.
•
The Recorder sometimes makes a cracking sound.
•
Freezing / Blocking
•
•
There is noise interference on the TV while a broadcast is being received.
Unit is making a humming / whirring noise
Possible solution
•
•
•
Check if you pressed a on the remote control unit.
Is the AC power adapter disconnected?
Check if you pressed a
on the Recorder.
•
External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the Recorder after first turning off the power, or unplugging the AC power adapter and re-plugging it in after one or two minutes.
•
•
•
•
Are batteries inserted with polarity ( e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating the remote control sensor?
•
Are screen mode adjustments (WIDE MODE) such as picture size made correctly? (Page 19)
•
•
The Recorder’s internal temperature has increased. Remove any objects blocking the vent or clean.
Is auto standby activated? (Page 24)
•
•
•
•
•
Are connections to external equipment correct? (Pages 15 to 17)
Is the input signal type selected correctly after connection? (Page 19)
Is the correct output source selected? (Page 10)
Is the antenna connected properly? (Page 9)
Hold the HDMI button on the remote control for 5 seconds to reset the output to 1080i. (Page 19)
•
•
Is the volume too low?
Check if you pressed mute on the remote control unit.
•
This is not a malfunction. This happens when the casing slightly expands and contracts according to changes in temperature. This does not affect the Recorder’s performance.
•
•
Check Freeview reception information as we have listed on the front of the manual.
Refer to page 9 to perform the First Time Installation.
•
Depending on the reception of the broadcast, interference may appear on the picture while you watch a TV broadcast and the unit is left on. This is not a malfunction of the unit.
•
The unit has a fan and hard drive installed. This noise is not a malfunction of the unit.
Cautions regarding use in high and low temperature environments
•
•
When the Recorder is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the Recorder will recover when the temperature returns to normal.
Do not leave the Recorder in a hot or cold location. Also, do not leave the Recorder in a location exposed to direct sunlight or near a heater.
Unrecordable Material
In the unlikely event that there is some problem like loss of recorded video or audio content due to HDD malfunction, please be aware beforehand that Sharp will bear no responsibility to compensate for the content that could not be recorded or edited, for the loss of recorded or edited video, or for other related direct or indirect damages.
If a power failure occurs
•
•
The content being recorded or timer recorded may be damaged if power failure occurs.
The content being played back may be damaged.
For important recording
• If the HDD malfunctions, the content recorded on the HDD may be lost. If you wish to save the content permanently, we recommend copying or moving the content to Video or DVD.
27
Appendix
Specifications
Item
Tuner /
Demodulator
System
Video
Teletext /
Subtitle
Audio
Receiving Signal Type (DVB-T)
Receiving Signal Type (DVB-T2)
CPU / Clock
Transport
Hard Disk Drive
Flash Memory
System Memory
Software
CPU Core
Video Standards
Field / Frame Rate
HD/SD Decoding Capability
Aspect Ratio
Video Input / Output
Output Modes
TU-T2HR32 Digital Terrestrial HD Recorder for Freeview HD
All combinations of the below parameters can be received and automatically detected. (Except bandwidth).
Channel Bandwidth
Modulation Type
FFT Mode
Code Rate
7, 8 MHz
QPSK, 16QAM, 64QAM
2K, 8K
1/2, 2/3, 3/4, 5/6, 7/8
Guard Internal 1/4, 1/8, 1/16, 1/32
All combinations of the below parameters can be received and automatically detected. (Except bandwidth).
Channel Bandwidth
Modulation Type
FFT Mode
Code Rate
Guard Internal
7, 8 MHz
QPSK, 16QAM, 64QAM, 256QAM
1K, 2K, 4K, 8K, 16K, 32K
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64,
1/128
STi7105/ST40 core, 450MHz
DVB Demultiplexer
320Gb
16MB
128MByte X 2 DDR
Pixsan Elgist and MHEG middleware
ST231 / 450MHz
MPEG-1 ISO/IEC 11172-2
MPEG-2 MP@ML and MP@HL, ISO/IEC 13818-2
MPEG-4 AVC MP@L4 and [email protected]
60/30 Hz for NTSC or 50/25 Hz for PAL
Interlaced Mode/ Progressive Mode: 1080i, 720p, 576p, and 576i
16:9 Widescreen
4:3 Widescreen (16:9)
4.3 Centre Cut Out
4.3 Letter Box (16:9)
Digital Video HDMI with HDCP supported
CVBS, R/G/B for TV SCART OUT
CVBS for VCR SCART OUT
CVBS, R/G/B for VCR SCART IN
HD
SD
1080P / 1080i / 720p / 576p
Output format changed by specific hot-key (software switchable)
576i
Decoding and display for supporting Closed Captions & Teletext
CPU Core
Audio Standards
Audio Input / Output
Digital Audio SPDIF Output Format
Sampling Rate
ST231/ 450MHz
MPEG-1 layer I & layer II, MP3
MPEG-2 layer II , Dolby Digital
MPEG-2 AAC/AAC+
AL/AR for TV SCART OUT (Volume adjustable)
AL/AR for VCR SCART OUT (Fixed volume)
AL/AR for VCR SCART IN
Optical Digital Audio SPDIF
IEC-60958 for PCM data
IEC-61937 for Encoded Bitstream Data
32, 44.1, 48, and 96 KHz
28
Appendix
Item
Software
Upgrade
Front Panel
Rear Panel
Power
Interface
Power
Consumption
Others
Over Air Download
USB Port
Display
Keypad
IR Sensor
RF Input Connector
Loop Through Output Connector
Stereo (left & right) Audio output
CVBS, R/G/B video output
Digital Video & Audio Output
Optical Digital Audio SPDIF
RJ 45
RS 232
Input Voltage
Normal Operation
Low Power Standby
Accessory
EMC/ Safety
ATC
Dolby
Software
TU-T2HR32 Digital Terrestrial HD Recorder for Freeview HD
Yes, via DVB-SSU
Yes
Power
Yes
F type, Female (for NTSC)/IEC type, Female (for PAL), 75 Ohm
F type/IEC type, Male/Female, 75 Ohm
Dual SCART for TV/VCR
For TV SCART: w/ OSD and Volume adjustable
For VCR SCART: w/o OSD and fixed Volume
HDMI Connector
TosLink Interface
Ethernet connection with unique Mac address
Service only
200~240 VAC, 50/60 z
17W@220V/60Hz
0.8W
Customer Selectable Remote Controller (and Batteries)
User’s Manual
RF Cable (1.1M)
Compliant to CE
HDMI 1.4, HDCP
Dolby Digital Stereo, Dolby Digital+ (HE AAC)
Dbook 6.1 compliant
Tested to DTG Test Suite
Audio Description, Recorder mix
MHEG5 HD Dbook 6.1
MHEG5 interaction channel
MHEG5 iPlayer ready
PIN CODE reminder
NOTE
• You need to insert the PIN code here and refer it to the pages in the manual where this is covered.
NOTE
•
Removal of a PIN code could be subject to a service charge and if you would like to use this feature the PIN code should be written down.
Trademarks
•
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
•
•
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
29
Appendix
End of life disposal
Attention: Your product is marked with this symbol.
It means that used electrical and electronic products should not be mixed with general household waste.
There is a separate collection system for these products.
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes.
For Switzerland: The used battery is to be returned to the selling point.
For other non-EU countries: Please contact your local authority for correct method of disposal of the used battery.
30
Important Notice
Digital Switchover and Your TV Equipment
WHAT YOU NEED TO DO TO ENJOY WATCHING TV DURING AND FOLLOWING DIGITAL
SWITCHOVER
Starting in 2008 and ending in 2012, television services in the UK will go completely digital, TV region by TV region.
To continue using this digital TV equipment during and following digital switchover, you will need to “reset” your digital TV channels.
Users of this product must reset their channels on at least 2 different occasions, normally 1 month apart when switchover happens. Digital UK, the body leading digital TV switchover, and broadcasters will advise you when to reset your channels on each occasion.
If you do not reset your channels, you risk losing some or all of your TV services during and following switchover.
Please refer to Page 24 of this manual for help with resetting channels.
Please note that in order to receive the maximum number of available TV services on your equipment you must perform a first time installation and do not just add channels.
If you have questions relating to digital switchover please don’t hesitate to call us on 0845 6 50 50 50 or visit www.digitaluk.co.uk.
The FREEVIEW service is subject to coverage. An aerial upgrade may be required. The FREEVIEW
PLAYBACK word and logo are trade marks of DTV Services Ltd and are used under licence.
© DTV Services Ltd 2006.
31
32
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below:
1. This guarantee shall only apply to faults which are due to inferior workmanship
or materials. It does not cover faults or damage caused by accident, misuse, fair wear and tear, signal related issues, neglect, tampering with the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not
apply if the product is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp,
or its appointed Service Facility within one year from the date this product was purchased. Proof of purchase must be provided.
4. In the unlikely event of this product requiring repair, please contact the Sharp
DTR help line on 0845 880 0421 .
5. No person has any authority to vary the terms or conditions of this guarantee.
6. This guarantee is offered as an additional benefit to your statutory rights, and
does not affect these rights in any way.
If you have any difficulty operating this product, or would like information on other
Sharp products, please telephone the Sharp DTR Help Line on the number given below.
Sharp DTR Help Line - 0845 880 0421
SHARP ELECTRONICS (U.K.) LTD.
4 Furzeground Way, Stockley Park, Uxbridge,
Middlesex, UB11 1EZ
Notes
33
TU-T2HR32 EN-05/10-dcs-8670
Shkarko
Lidhja publike u përditësua
Lidhja publike për bisedën tuaj është përditësuar. You may view and manage your chat links after registration here.
Lidhja publike e dokumentit
Reklamë