RB 1080
High Current Two Channel Amplifier
Description
The RB-1080 rests close to the pinnacle of Rotel’s two channel power amplifier offerings. Power output (200 watts per channel into 8 ohms) is extraordinary. The Rotel-made toroidal transformer feeds separate power supplies for each channel.
British BHC Slit Foil storage capacitors provide quick charge/discharge times for instantaneous response to the most demanding signal peaks. Damping factor, at 1,000, shows this amplifier’s unparalleled ability to lock onto the most difficult speakers to precisely control diaphragm motion and give you superior sound quality. Heavy duty dual binding posts encourage the use of the most advanced speaker cables while switchable balanced (XLR) and unbalanced (RCA) inputs provide extraordinary system configuration flexibility. Front panel heat sinks add a strikingly dramatic look. Separate inputs and outputs for 12 volt “trigger” signals and a detachable AC cord make this amplifier well suited for custom-installed systems with total remote control capability.
Specifications
Power Configurations: 2 x 200 watts
Watts/Channel:
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,
0.06% THD
THD (20-20,000Hz):
cont. rated power
one-half rated power
one watt per channel
200 watts
0.03%, maximum
0.01%, maximum
0.02%, maximum
IM Distortion (at rated ower, 60Hz:7kHz = 4:1): 0.03%, maximum
Damping Factor (8 ohms): 1000
Input Sens. / Impedance:
Frequency Response:
S/N Ratio (IHF A):
Power Consumption:
Dimensions (W x H x D):
Front Panel Height:
Weight (net):
1.5V / 32 kohms
15-100 kHz (±1dB)
116dB
550 watts
433 x 140 x 380mm
17 1 /
8
x 5 1 /
2
x 15”
127 mm, 5.0”
16.7 kg / 36.8 lbs
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T +1 978 664 3820
F +1 978 664 4109 www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T +44 (0) 1903 221 763
F +44 (0) 1903 221 525
