Redring LWSS STAINLESS STEEL User manual

Redring LWSS STAINLESS STEEL User manual

Showering and hot water solutions

2012/2013

Redring

Showering and hot water solutions

Redring Pedigree

Redring is part of Glen Dimplex. As a global group, this gives Redring exposure to international design trends, technologies and best-practice, which allows us to market our products to increasingly demanding and design conscious customers.

Redring Solutions

Redring provides showering and hot water solutions, through a market leading range of products; from digital and care showering to electric flow boilers.

Showering

At Redring we know there’s nothing better than a refreshing shower. Our stylish range has been designed to compliment lifestyles.

Water Heating and Water Boiling

When specifying a hot water heater you need to consider the use that the hot water is going to be put to. We have a comprehensive range of water heating products to suit all applications. Designed using the latest technology and built to Redring’s exacting standards, the range covers both storage and point-of-use.

Washrooms

Our washroom range of products includes hygienic infra-red hand and face dryers and no-touch flush and hand-wash units, which keeps health and safety in focus and helps to reduce the risks of cross-infection between users.

Welcome

Designed with speed in mind and sized so that you can keep it close-to-hand, this pocket guide is packed with all the information you should need to choose the right Redring product. Every page contains a brief overview of what the product does, its key features, plus all the other information you may require to ensure specification of the right Redring product for every job.

For more detailed information about

Redring and our products, you can also visit www.redring.co.uk, or call

0844 372 7750.

2 Technical 0844 372 7766 Sales 0844 372 7750

Digimix

Pages 14-19

Selectronic

Pages 26-29,

44-51

SB2

Pages 116-117

Powerstream

Professional

Pages 70-73

www.redring.co.uk

3

Solutions in detail

Showers

Designer

If you want to stay ahead in the style stakes the Designer range is for you. With chrome styling, chic designs and the latest features you can’t get any better.

Family

When it comes to safe showering for all the family, look no further than our Family range. Smart modern looks, great performance and reassuring safety features make this range the perfect choice for the family bathroom.

Day to Day

For get up and go showering, it’s difficult to beat our Day to Day range. Boasting good performance, ergonomic lines and outstanding value, the range offers effective efficient showering.

Care

Our care range has been developed to make showering easier for the elderly, visually impaired and less able.

Water Heating

Electric Flow Boilers

Whatever the application, our range of electric flow boilers provides an efficient, versatile and safe way of heating water, wherever there is mains electricity.

Electric Unvented and Vented Water Storage

The Redring LWSS Duplex Stainless Steel water heating cylinders heads-up our wide range of unvented water storage products and provides effective, fast and safe mains-fed hot water around any property. If it’s vented water storage that you require, we have units that range from 100 litres down to 5 litres, including remote units that can be installed under the sink.

Instantaneous Water Heating

With economy settings, our Powerstream 3 Phase Plus instantaneous water heaters are ideal for supplying high volumes of water, wherever a 3-phase 415V supply is available - eliminating the need for centrally stored hot water cylinders and saving on electricity usage and space.

We also offer a 12kW unit, which is the highest rated single phase heater on the UK market.

4 Technical 0844 372 7766 Sales 0844 372 7750

Water Boiling

Beverage Water Boilers

Used for making cups of tea, coffee, soup and hot snacks on demand, our wall-mounted and self-filling range of water boilers can be specified for use across both Industrial and

Commercial applications.

Washrooms

Hand Washing

Ideal for use in health and food preparation areas, our hand wash units are compact and simple to operate. A

Vortex spray outlet is available, which eliminates the need for costly maintenance, due to the build-up of scale in hard water areas.

Hand Drying

Our hand dryers are widely specified and accepted by the National Health Service, approved by the Health and

Safety Executive and the Ministry of Defence, for use in commercial and office environments.

Water Management

Autoflush is a compact, unobtrusive, automatic urinal flush controller which maintains hygiene whilst eliminating water wastage.

Redring Online

Find out more about

Redring by visiting us online at

www.redring.co.uk, which contains comprehensive technical and product installation information, downloads, a brochure builder, latest news and contact details.

www.redring.co.uk

5

Technical Services

Our technical services call centre is staffed by a team trained in diagnosing and rectifying potential concerns over the phone. If for any reason they are unable to solve a problem by phone, they will brief an engineer on your behalf prior to a service visit to ensure that, wherever possible, the problem is fixed first time. The team also provides advice on product selection, application, installation and operation.

For further information: Tel: 0844 372 7766 Fax: 0844 372 7767

Customer Training Centre

The Redring Customer Centre at our head office in

Peterborough showcases many of the products from our range. The centre is available for product introduction and training for distributors, installers and specifiers by arrangement. Training can be combined with live product demonstration and a guided factory tour of our manufacturing and assembly facilities.

6 Technical 0844 372 7766 Sales 0844 372 7750

Range Contents

Showering

Introduction

Range Profile in Detail

Product Selector

10

12

Thermostatic Digital Mixers

Digimix Pumped

Low Pressure RF Remote

Controlled Thermostatic

Digital Mixer Shower

14

Digimix

High Pressure RF Remote

Controlled Thermostatic

Digital Mixer Shower

16

Digimix Accessories 18

Electric Showers

Advantage 550C

Chrome Multi-service

Entry Electric Showers

Slimline 650C

Chrome Ultra Slim Push

Button Electric Showers

Expressions 500SC

& 500SL

Chrome and Silver

Smart Technology

Electric Showers

20

22

Selectronic Premier 26

State of the Art Thermostatic

Electric Showers

Selectronic Shower Safe 28

Thermostatic

Electric Showers

Advantage 550

White Multi-service

Entry Electric Showers

30

32 Slimline 650

White Ultra Slim Push

Button Electric Showers

Expressions 550S

Smart Technology

Electric Showers

34

24

Expressions 500S

Smart Technology

Electric Showers

Slimline 620

White Ultra Slim

Electric Showers

Active 350S

White Dual Concentric

Control Electric Showers

36

38

40

Active 320S

White Dual Control

Electric Showers

42

Selectronic Premier 44

State of the Art Thermostatic

Electric Showers

Selectronic &

Selectronic Plus

46

State of the Art Thermostatic

Electric Showers

Selectronic CWP 48

Thermostatic Shower and

Level Access Pump Pack

Expressions 570

White Integral Pumped

Electric Showers

52

Electric Shower

Accessories

54

Power Showers

Expressions 520TS

& 520M

Power Showers

56

Thermostatic Mixers

Selectronic Mixer

TMV3 Thermostatic

Mixer Shower

58

Bar Mixer

Thermostatic Mixer Shower

60

www.redring.co.uk

7

Range Contents

(continued)

Water Heating Systems

Introduction

Range Profile in Detail

Product Selector

62

64

Immersion Heaters & Controller

Domestic Immersion

Heaters

Aqualoy and Copper Water

Immersion Heaters

90

Electric Flow Boilers

Powerstream Ascari

Central Heating and

Hot Water Flow Boiler

Powerstream

Professional

Central Heating, Underfloor and Hot Water Flow Boilers

70

66

Industrial Immersion

Heaters

Incoloy 825 Industrial Water

Immersion Heaters

92

Immersion Heater

Controller

Economy 7 Time Controller

94

Unvented Water Storage Heaters

Aqualoy LWSS Range 74

90-300 litre Stainless Steel

Unvented Water Storage Heaters

Aqualoy MWSS

30-75 litre Stainless Steel

78

Unvented Water Storage Heaters

Aqualoy SWSS TP

7-15 litre Stainless Steel

80

Unvented Water Storage Heaters

Aqualoy SWSS 82

7-15 litre Stainless Steel

Unvented Water Storage Heaters

MW

10-15 litre Unvented

Water Storage Heaters

EW

10-15 litre Unvented

Water Storage Heaters

86

88

Vented Water Storage Heaters

Flatback Cistern

25-100 litre Vented

Water Storage Heaters

96

98 Contour 7000

7 litre Slimline Vented

Water Storage Heaters

WS10

10 litre Vented Water

Storage Heater

100

WS7-EcoT 102

7 litre Vented Water Storage

Heaters with 24 hour, 7 day programmable timer

104 WS7

7 litre Vented Water

Storage Heaters

WS5

5 litre Vented Water

Storage Heater

106

Instantaneous Water Heaters

Powerstream

Unvented Instantaneous

Water Heaters

108

Powerstream

3 Phase Plus

Eco 3-phase Unvented

Water Heaters

110

8 Technical 0844 372 7766 Sales 0844 372 7750

Water Boiling Units

Introduction

Range Profile in Detail 113

Water Boiling Units

SB Professional 114

2.5-25 litre Stainless Steel

Beverage Water Boilers

SB

2

116

2.5-4 litre Beverage Water Boilers

Corvette

1-3.8 litre Wall Kettle

118

Washroom Solutions

Introduction

Range Profile in Detail 120

Product Selector 122

Hand Washing

Autosensor 124

Touch-free Vortex Spray

Hand Wash Unit

Instant 3 & 7

Vortex Spray Hand

Wash Units

126

Hand Dryers

ADP1 Turbo-Airflo

High Velocity Automatic

Hand Dryer

128

AD1 Autodry

Compact Automatic

Hand Dryers

AD10 Autodry

Automatic Hand Dryers

130

132

AD20, 30 & 50 Autodry 134

Automatic Hand and

Face Dryers

Water Management

Autoflush

Water Management

136

Technical Tables and Approvals

Technical Tables

Technical Tables 138

• Pressure Conversion Table

• Hot Water Recovery Chart

• Standard Formulae

• Temperature Conversion Table

• Physical Constants

• Required Hot Water

Requirements

Approvals

Approvals and

Associations

140

www.redring.co.uk

9

Shower

Range Profile in Detail

Thermostatic Digital Mixers

Digimix

Pumped

Page 14

Low Pressure RF Remote Controlled

Thermostatic Digital Mixer Shower

Designer

Showering

Digimix

High Pressure RF Remote Controlled

Thermostatic Digital Mixer Shower

Designer

Showering Page 16

Electric Showers

Advantage

550C

Page 20

Slimline

650C

Page 22

Expressions

500SC & 500SL

Page 24

Selectronic

Premier

Page 26

Chrome Multi-service Entry

Electric Showers

Designer

Showering

Chrome Ultra Slim Push Button Electric

Showers

Designer

Showering

Chrome and Silver Smart Technology

Electric Showers

Designer

Showering

State of the Art Thermostatic

Electric Showers

Family

Showering

Selectronic

Shower Safe

Page 28

Advantage

550

Page 30

Slimline

650

Page 32

Thermostatic Electric Showers

Family

Showering

White Multi-service Entry

Electric Showers

Family

Showering

White Ultra Slim Push Button

Electric Showers

Family

Showering

Expressions

550S

Page 34

Smart Technology Electric Showers

Family

Showering

Expressions

500S

Page 36

Smart Technology Electric Showers

Family

Showering

10 Technical 0844 372 7766 Sales 0844 372 7750

Electric Showers (continued)

Slimline

620

White Ultra Slim Electric Showers

Page 38

Day to Day

Showering

Active 350S

White Dual Concentric Control

Electric Showers

Showering

Page 40

Active 320S White Dual Control

Electric Showers

Showering

Page 42

Selectronic

Premier

Page 44

State of the Art Thermostatic

Electric Showers

Care

Showering

Selectronic &

Selectronic Plus

Page 46

Selectronic

CWP

Page 48

Expressions

570

Page 52

State of the Art Thermostatic

Electric Showers

Showering

Thermostatic Shower and Level Access

Pump Pack

Care

Showering

White Integral Pumped

Electric Showers

Showering

Thermostatic and Manual Power Showers

Power Showers

Expressions

520TS & 520M

Page 56

Thermostatic Mixers

Selectronic

Mixer

Page 58

Showering

TMV3 Thermostatic

Mixer Shower

Showering

Bar

Thermostatic

Mixer

Page 60

Thermostatic Mixer Shower

Day to Day

Showering

www.redring.co.uk

11

Shower Selector

Choosing the right shower is vitally important.

At Redring, customer support begins before you even buy!

This selector should enable you to make a decision, but if you require assistance, please ring our customer techline on

0844 372 7766 for further information.

Mains pressure

Type of shower required

Electric shower Digital mixer Mixer shower

Choose from

Digimix 14

Choose from Choose from Choose from

Advantage 20

550C

Slimline

650C

22

Expressions 24

500SC

Expressions 24

500SL

Selectronic 26

Premier

Selectronic 28

Shower Safe

Advantage

550

30

Slimline

650

32

Expressions 34

550S

Expressions 36

500S

Slimline

620

Active

320S

38

Active

350S

42 Selectronic 44

Premier

40

Selectronic 44 Selectronic 46

Plus

Selectronic 48

CWP

Selectronic 58

Mixer

Bar Mixer 60

60

50

40

30

20

Winter

(temp rise: 35 o

C)

Summer

(temp rise: 25 o C)

10

0

2 3

Shower temperature

Winter set to 41

4

Flow rate (l/min)

5 o C

Summer

6 7

12 Technical 0844 372 7766 Sales 0844 372 7750

10.8

kW

Mains or low pressure system?

Low pressure

Type of shower required

Digital mixer Electric shower Power shower Mixer shower

Choose from

Digimix

Pumped

Choose from Choose from Choose from

14 Expressions 50

570

Expressions 56

520TS

Expressions 56

520M

Selectronic 58

Mixer

Bar Mixer 60

Key

Designer

Showering

Family

Showering

Day to Day

Showering

Care

Showering

Water flow and temperature graph for instant electric showers

This graph shows the relationship between hot water flow and temperature rise obtainable from an instant electric shower. The different power loadings (available in the range) expressed in kilowatts are shown as curves on the graph. The incoming mains water temperature into your property can vary from 5 o

C in winter to a maximum of 20 o

C in summer. The graph shows what can be expected in winter at 5 o

C and in summer at 15 o

C. In winter the 8.5kW shower will give a flow rate of about 3.5 litres per minute while in summer it will give approximately 5.1l/min.

Please refer to page 138 for more information.

www.redring.co.uk

13

Portia Accessory Kit shown, see page 20 for further details

Dimensions for Remote Control and Base Unit

73mm 37 435mm

Technical

Operating water pressure - 0.15bar min to 1bar max (0.15bar = 1.5m)

Specification

I Water connection - 15mm plain shank tails, push fit or standard compression fittings I RF remote control handset range 10m I Colour coded inlet pipe - red and blue I Anti-vibration mounting on mixer base unit I Mains supply 230/240V I Rating 200W @ 240V I Base supplied with 2m pre-wired cable I Fixing pack supplied I Remote control batteries included - 2 x AAA.

14 Technical 0844 372 7766 Sales 0844 372 7750

Digimix Pumped

Low Pressure RF Remote Controlled

Thermostatic Digital Mixer Shower

Digimix Pumped brings together the very latest in shower design, styling and performance. Fully thermostatic, this contemporary digital mixer shower provides the ultimate in convenience and control through a remote control which is used to adjust the flow and temperature and incorporates an

LCD display. The remote control comes with programmable options that allow you to switch the shower to your preferred setting and prepare the perfect shower before you even set foot into the cubicle.

Application

Designer showering.

Key Features

Suitable for gravity-fed plumbing systems I Remote siting of mixer - ease of installation I Integral pump included for power shower performance I RF remote controlled I LCD digital temperature and flow readout I

Programmable pre-set flow and temperature ensures next shower requires no adjustment I Favourite settings programmable I Adjustable automatic off function,

Safety Features

Thermostatic I Automatic shutdown if cold or hot water supply fails I Overheat protection I Maintains temperature to + or -1°C (in stable conditions) I Default on/off setting 40°C I Option to limit temperature adjustment I Battery level indicator.

Outer Casing

Remote control unit and cradle - High impact I Easy clean I Thermoplastic.

Accessories

Pressure

Approvals

Guarantee*

4 chrome kits available - See page 18 for details.

Operating pressure - 0.15bar to 1bar (0.15bar = 1.5m).

IPX2 Base unit I CE.

3 year product guarantee (UK).

Product Range

Product Reference

Digimix Pumped Digital Mixer

Short Code Cat. No

DMP1

* Terms and conditions apply. Visit www.redring.co.uk for full details.

46678001

www.redring.co.uk

15

Portia Accessory Kit shown, see page 20 for further details

Dimensions for Remote Control and Base Unit

73mm 37 435mm

Technical

Specification

Operating water pressure - 1bar min to 5bar max. I Water connection

- 15mm plain shank tails, push fit or standard compression fittings I

RF remote control handset range 10m I Colour coded inlet pipe - red and blue I Anti-vibration mounting on mixer base unit I Mains supply

230/240V I Rating 50W @ 240V I Base supplied with 2m pre-wired cable I Fixing pack supplied I Remote control batteries included -

2 x AAA.

Digimix

High Pressure RF Remote Controlled

Thermostatic Digital Mixer Shower

Digimix brings together the very latest in shower design, styling and performance. Fully thermostatic, this contemporary digital mixer shower provides the ultimate in convenience and control through a remote control which is used to adjust the flow and temperature and incorporates an LCD display. The remote control comes with programmable options that allow you to switch the shower on and prepare the perfect shower before you even set foot into the cubicle.

Application

Key Features

Guarantee*

Designer showering.

Suitable for most unvented plumbing systems I

Remote siting of mixer - ease of installation I RF remote controlled I LCD digital temperature and flow readout I Programmable pre-set flow and temperature ensures next shower requires no adjustment I

Favourite settings programmable I Adjustable automatic off function, ensures no waste water.

Safety Features

Thermostatic I Automatic shutdown if cold or hot water supply fails I Overheat protection I Maintains temperature to + or -1°C (in stable conditions) I

Default on/off setting 40°C I Option to limit temperature adjustment I Battery level indicator.

Outer Casing

Remote control unit and cradle - High impact I Easy

clean I Thermoplastic.

4 chrome kits available - See page 18 for details.

Accessories

Pressure

Approvals

Operating pressure - 1bar to 5bar.

IPX2 Base unit I CE.

3 year product guarantee (UK).

Product Range

Product Reference

Digimix Non-Pumped Digital Mixer

Short Code Cat. No

DMNP1

* Terms and conditions apply. Visit www.redring.co.uk for full details.

46677001

16 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

17

Emilia

Digimix Accessories

The Digimix shower can be combined with one of four stylish accessory kits, each specially selected for stylish design and optimum performance. No matter what your installation requirements or design preferences, we have an accessory set to match your needs.

‘Portia’ Through the wall diverter with dual shower

Accessory Kit head:

The ultimate showering experience. A stunningly designed accessory set with a diverter control that enables you to switch between an overhead rain shower and a multi-mode handset - perfect for those times you don’t want to get your hair wet.

‘Cordelia’ Extendable through the ceiling riser rail

Accessory Kit and shower head:

A sleek and sophisticated through the ceiling accessory set with a height adjustable multi-mode handset for an invigorating shower.

‘Emilia’ Fixed through the ceiling shower head:

Accessory Kit

A stylish fixed through the ceiling shower head that provides the perfect rain shower experience.

‘Ophelia’ Bulk-head riser rail and shower head:

Accessory Kit

A contemporary designed accessory set with a beautifully curved riser rail and multi-mode handset.

Portia Cordelia Ophelia

Product Range

Product Reference

Portia

-

Chrome Through-the-Wall Diverter with Dual Shower Head Kit

Cordelia

- Chrome Ext. Through-the-Ceiling Riser Rail and Shower Head Kit

Emilia

-

Chrome Fixed Through-the-Ceiling Shower Head Kit

Ophelia

- Chrome Bulk-head Riser Rail and Shower Head Kit

Short Code Suitable for

DMACC4

Colour

All installations Chrome

Cat. No

83671104

DMACC3

DMACC2

DMACC1

All installations Chrome

All installations Chrome

All installations Chrome

83671103

83671102

83671101

18 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

19

Dimensions

230mm 93.5

Technical

Specification

kW

variant

8.5

9.5

Left or right - Top, bottom or rear entries I Fittings included I

Operating water pressure 0.7-7bar (10-100psi) I Water pressure operated power switch I Water connection - 15mm plain shank tails push fit or standard compression fittings I Removable lower section for ease of installation.

kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

Recommended fuse ratings

40 amps

45 amps

20 Technical 0844 372 7766 Sales 0844 372 7750

Advantage 550C

Chrome Multi-service Entry

Electric Showers

Ideal for shower replacement and upgrades, the Advantage

550C has been developed with the very latest instantaneous shower styling, mixing traditional and contemporary functionality.

Designed to stabilise temperature changes caused by water pressure fluctuations, it comes with the convenience of a push button start/stop and power selection facility. Phased shutdown is a key feature, and ensures residual hot water is flushed out reducing scale and ensuring cool-start use.

Application

Designer showering.

Key Features

Six pipe, six cable entry configuration (left, right, top, bottom or rear) - for highly flexible installations or replacements I Push button power selection on/ off control I 3 push button power settings (cold/ economy /high) I LED power indicator I Independent rotary temperature control for set and forget convenience I Flush buttons for easy clean.

Safety Features

Fully temperature stabilised I Smart Time

®

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures cool-start use I

Phased shutdown flashing LED indicator I

Overheat protection.

Outer Casing

Chrome and black front cover I High impact I

Easy clean I Thermoplastic material.

Accessories

Pressure

Approvals

Guarantee*

Chrome 6 mode rub-clean handset and full accessory kit: Soap dish I Hose with retaining ring I Riser rail I

Adjustable clamp I See page 54 for further accessories.

Operating pressure - 0.7bar to 7bar.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Advantage 550 Chrome 8.5kW ADV5508C

Advantage 550 Chrome 9.5kW ADV5509C

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53674205

53676705

www.redring.co.uk

21

Dimensions

210mm 70

Technical

Specification

kW

variant

8.5

9.5

Operating water pressure 1-10bar (14.5-145psi) I Water pressure operated power switch I Water connection - 15mm plain shank tails push fit or standard compression fittings I Top, bottom or rear cable entry I Top, bottom or rear water entry I Product has a removable side section for ease of installation. kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

Recommended fuse ratings

40 amps

45 amps

22 Technical 0844 372 7766 Sales 0844 372 7750

Slimline 650C

Chrome Ultra Slim Push Button

Electric Showers

The Slimline 650C has a contemporary chrome, ultra slimline profile, generating more space in a shower cubicle. It is fully temperature stabilised and has the added convenience of a push button on/off and power selection facility. The phased shutdown feature ensures that temperatures are managed to deliver a cool and safe start-up for the next user.

Application

Key Features

Designer showering.

Ultra slimline profile I Push button power selection and on/off I 3 power settings I Rotary flow/ temperature control for set and forget convenience I

LED power indication I Multi-service points for ease of installation.

Safety Features

Fully temperature stabilised I Overheat protection I

Smart Time

® cool-start use I Phased shutdown flashing LED indicator.

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures

Outer Casing

Chrome front cover I High impact I

Easy clean I Thermoplastic.

Accessories

Pressure

Full set of all chrome accessories: Rub-clean, multi- mode handset I 6 position variable spray head I

Soap dish I Hose with retaining ring I Riser rail I

Adjustable clamp I See page 54 for further accessories.

Operating pressure - 1.0bar to 10bar.

Approvals

Guarantee*

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Slimline 650 Chrome 8.5kW R6508C

Slimline 650 Chrome 9.5kW R6509C

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53557202

53558202

www.redring.co.uk

23

500SL

Dimensions

205mm

500SC

Technical

Specification

kW

variant

8.5

9.5

Operating water pressure 0.7-7bar (10-100psi) I Water pressure operated power switch I Standard 15mm inlet connection I Top, bottom or rear cable entry options I Removable corner section for ease of installation. kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

Recommended fuse ratings

40 amps

45 amps

24 Technical 0844 372 7766 Sales 0844 372 7750

Expressions 500SC & 500SL

Chrome and Silver Smart Technology

Electric Showers

The Expressions 500 Chrome and Silver have been developed with contemporary ‘S-line’ styling, smart technology and a convenient start/stop button, allowing the power and flow rate setting to remain set ready for your next shower.

Application

Designer showering.

Key Features

Separate rotary control for power selection I Push- button stop/start, for ‘set and forget’ convenience I 3 power settings with ‘Power On’, ‘Power Medium’ and

‘Power High’ neon indicators I Top, bottom or rear entry access for cable and cold water supply I

Removable corner section for ease of installation.

Safety Features

Fully temperature stabilised I Smart Time

®

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures cool-start use I

Rotary flow/temperature control with numerical indicator window I Overheat neon indicator.

Outer Casing

Chrome (SC) / Silver (SL) I High impact I

Easy clean I Scratch resistant I Thermoplastic.

Accessories

Pressure

Approvals

Guarantee*

Chrome 6 mode rub-clean handset and full accessory kit: Soap dish I Hose with retaining ring I Riser rail I

Adjustable clamp I See page 54 for further accessories.

Operating pressure - 0.7bar to 7bar.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Expressions 500S Chrome 8.5 EX5008SC 53673005

Expressions 500S Chrome 9.5 EX5009SC 53673505

Expressions 500S Silver 8.5 EX5008SL 53673006

Expressions 500S Silver 9.5 EX5009SL 53673506

* Terms and conditions apply. Visit www.redring.co.uk for full details.

www.redring.co.uk

25

Dimensions

264mm 101

Technical

Specification

Operating water pressure 0.7-10bar (10-145psi) I Cable entries: top, bottom and rear (up to 16mm

2

) I Pipe entries - top, bottom and rear

(on right hand side) I Water connection - 15mm inlet connection.

kW

variant

8.5

9.5

10.8

kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

9.9 - 10.8

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

10 - 16mm

2

Recommended fuse ratings

40 amps

45 amps

45 amps

26 Technical 0844 372 7766 Sales 0844 372 7750

Selectronic Premier

State of the Art Thermostatic

Electric Showers

The Selectronic Premier range of thermostatic showers are the very epitome of control, performance and safety. With unique microprocessor control technology and an array of advanced features, the Selectronic Premier represents the very latest in family showering innovation. Stylish and good looking, the range is available in three different versions, including one with a user friendly wireless remote control.

Application

Family showering.

Key Features

One touch operation I Large tactile, easy to press buttons I Large LED digital readout display I Audible feedback response to commands I Independent temperature adjustment I Eco Water-Save feature that automatically calculates and adjusts the optimum flow rates meeting the ‘Sustainable Homes’ water consumption requirements▲ I Eco Power-Save feature that automatically adjusts the power of the shower to achieve the selected water temperatures.

Safety Features

Fully thermostatic operation - maintains temperature within +/- 1°C I Pre-programmed to provide automatic hot water at a constant and safe temperature I

Temperature ‘Lock Mode’, with three optional settings

- eliminating any increase by accident▲ I Audible feedback response to commands I Matt antiglare label backing I Phased shutdown - reducing scale and ensuring cool-start for next user I Automatic shutdown after 30 minutes of inactivity.

Outer Casing

White I High impact I Easy clean I Scratch resistant

I Thermoplastic I Matt antiglare surface finish to control area.

Accessories

Pressure

Approvals

Guarantee*

Curved white 6 pattern rub-clean handset I 0.45m riser rail I Adjustable handset holder I Soap dish I

1.25m easy clean smooth shower hose.

Operating pressure - 0.7bar to 10bar.

BEAB CARE I BEAB Approved I RNIB product endorsement I RNIB Inclusive Design status I

Disabled Discrimination Act compliant I WRAS

Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Selectronic Standard 8.5kW SELP85S

Selectronic Plus 8.5kW SELP85P

53677501

53677505

Selectronic Remote 8.5kW SELP85PR 53677510

Selectronic Standard 9.5kW SELP95S 53678501

Selectronic Plus 9.5kW SELP95P 53678505

Selectronic Remote 9.5kW SELP95PR 53678510

Selectronic Standard 10.8kW SELP108S 53679501

Selectronic Plus 10.8kW SELP108P 53679505

Selectronic Remote 10.8kW SELP108PR 53679510

* Terms and conditions apply.

Selected on installation. Visit www.redring.co.uk for full details.

www.redring.co.uk

27

Dimensions

265mm 84

Technical

Specification

kW

variant

8.5

9.5

10.8

Operating water pressure 0.7-10bar (10-145psi) I Cable entries: top, bottom and rear (up to 16mm

2

) I Pipe entries: top, bottom and rear (on right hand side) I Water connection - 15mm plain shank tails push fit or standard compression fitting. kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

9.9 - 10.8

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

10 - 16mm

2

Recommended fuse ratings

40 amps

45 amps

45 amps

28 Technical 0844 372 7766 Sales 0844 372 7750

Selectronic Shower Safe

Thermostatic Electric Showers

The Selectronic Shower Safe range combines unique microprocessor thermostatic controls with contemporary styling to give the ideal shower for all the family. Its simple to use push button controls with premium chrome accessories make it both

‘safe’ and ‘stylish’.

Application

Family showering.

Key Features

One-touch operation I Tactile button coding with large, easy to press buttons I Heat exchanger designed to minimise the build up of scale I LED digital readout I

Independent adjustment for both temperature and water flow rate.

Safety Features

Fully thermostatic - adjusting power and water flow to achieve selected temperature I Microprocessor thermostatic control for safety and comfort I

Pre-programmed start-up temperature of 41°C I

Phased shutdown - reducing scale and ensuring cool- start use I Audible feedback response commands I

Auto shut-off to protect against high temperatures.

Outer Casing

White I High impact I Easy clean I

Scratch resistant I Thermoplastic.

Accessories

Pressure

Approvals

Guarantee*

Premium chrome accessory kit: 6 mode rub clean handset I Riser rail with fully adjustable handset holder I Soap dish I Chrome shower hose I See page 54 for further accessories.

Operating pressure - 0.7bar to 10bar.

BEAB Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code

Selectronic Safe 8.5kW

Selectronic Safe 9.5kW

SEL85T

SEL95T

Selectronic Safe 10.8kW SEL108T

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53557020

53558020

53559020

www.redring.co.uk

29

Dimensions

230mm 93.5

Technical

Specification

kW

variant

8.5

9.5

Left or right - Top, bottom or rear entries I Fittings included I

Operating water pressure 0.7-7bar (10-100psi) I Water pressure - operated power switch I Water connection - 15mm plain shank tails push fit or standard compression fittings I Removable lower section for ease of installation.

kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

Recommended fuse ratings

40 amps

45 amps

30 Technical 0844 372 7766 Sales 0844 372 7750

Advantage 550

White Multi-service Entry Electric Showers

Ideal for shower replacement and upgrades, the Advantage

550 has been developed with the very latest instantaneous shower styling, mixing traditional and contemporary functionality.

Designed to stabilise temperature changes caused by water pressure fluctuations, it comes with the convenience of a push button start/stop and power selection facility. Phased shutdown is a key feature, and ensures residual hot water is flushed out reducing scale and ensuring cool-start use.

Application

Family showering.

Key Features

Six pipe, six cable entry configuration (left, right, top, bottom or rear) - for highly flexible installations or replacements I Push button power selection on/off control I 3 push button power settings (cold/economy

/high) I LED power indicator I Independent rotary temperature control for set and forget convenience I

Flush buttons for easy clean.

Safety Features

Fully temperature stabilised I Smart Time

®

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures cool-start use I

Phased shutdown flashing LED indicator overheat protection.

Outer Casing

White front cover I High impact I Easy clean I

Thermoplastic material.

Accessories

Pressure

Approvals

Guarantee*

Chrome 6 mode rub-clean handset and full accessory kit: Soap dish I Hose with retaining ring I Riser rail I

Adjustable clamp I See page 54 for further accessories.

Operating pressure - 0.7bar to 7bar.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Advantage 550 8.5kW

Advantage 550 9.5kW

ADV5508

ADV5509

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53674202

53676702

www.redring.co.uk

31

Dimensions

210mm 70

32

Technical

Specification

kW

variant

8.5

9.5

10.5

Operating water pressure 1-10bar (14.5-145psi) I Water pressure operated power switch I Water connection - 15mm plain shank tails push fit or standard compression fittings connection I Top, bottom or rear cable entry I Top, bottom or rear water entry I Accessories - soap dish has removable insert for easy cleaning I Product has a removable side section for ease of installation. kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

9.6 - 10.5

Recommended cable sizes

6 - 10mm 2

6 - 10mm

2

10 - 16mm 2

Recommended fuse ratings

40 amps

45 amps

45 amps

Technical 0844 372 7766 Sales 0844 372 7750

Slimline 650

White Ultra Slim Push Button

Electric Showers

The Slimline 650 has an ultra slimline profile, generating more space in a shower cubicle. It is fully temperature stabilised and has the added convenience of a push button power selection facility. The phased shutdown feature ensures that temperatures are managed to deliver a cool and safe start-up for the next user.

Application

Family showering.

Key Features

Ultra slimline profile I Push button power selection and on/off I 3 power settings I Rotary flow/ temperature control for set and forget convenience I

LED power indication I Multi-service points for ease of installation.

Safety Features

Fully temperature stabilised I Overheat protection I

Smart Time

®

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures cool-start use I Phased shutdown flashing LED indicator.

Outer Casing

White I High impact I Easy clean I Scratch resistant I Thermoplastic.

Accessories

Pressure

White and chrome accessory kit: Rub-clean, multi- mode handset with 3 position variable spray head I

Soap dish I Hose with retaining ring I Riser rail I

Adjustable clamp I See page 54 for further accessories.

Operating pressure - 1.0bar to 10bar.

Approvals

Guarantee*

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Slimline 650 8.5kW R6508

Slimline 650 9.5kW R6509

Slimline 650 10.5kW R65010

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53557201

53558201

53559201

www.redring.co.uk

33

Dimensions

205mm

Technical

Specification

kW

variant

8.5

9.5

Operating water pressure 0.7-7bar (10-100psi) I Water pressure operated power switch I Water connection - standard 15mm inlet connection I Top, bottom or rear cable entry options I Fixing pack and instructions supplied I Removable corner section for ease of installation. kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

6 - 10mm 2

6 - 10mm

2

Recommended fuse ratings

40 amps

45 amps

34 Technical 0844 372 7766 Sales 0844 372 7750

Expressions 550S

Smart Technology Electric Showers

The Expressions 550S has been developed with contemporary

‘S-line’ styling and smart technology to provide the convenience of a push button start/stop facility and push button power selection. Phased shutdown is a key feature provided through electronic control and this shower also has a temperature ready LED indicator.

Application

Family showering.

Key Features

Smart Flow

®

flow indication - LED indicates flow levels I

Smart Start

®

temperature - LED indicates when chosen temperature is ready I Separate push button power controls: ‘High On’, ‘Medium On’, ‘Cold On’ and ‘Stop’

LED indicators I Removable corner section for ease of installation I Top, bottom or rear entry access for cable and cold water supply.

Safety Features

Fully temperature stabilised I Smart Time

®

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures cool-start use I

Phased shutdown flashing LED indicator I Rotary flow/ temperature control with Smart Temp

®

- illuminated digital temperature indicator I Overheat LED indicator.

Outer Casing

Polar white I High impact I Thermoplastic I

Easy clean.

Accessories

Deluxe chrome 6 mode rub-clean handset and oval curved style accessory kit: Soap dish I Hose with retaining ring I Riser rail I Adjustable clamp I See page 54 for further accessories.

Pressure

Approvals

Guarantee*

Operating pressure - 0.7bar to 7bar.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Expressions 550S 8.5kW EX5508S

Expressions 550S 9.5kW EX5509S

Extended Control Lever LEV2

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53674001

53674501

See page 54

www.redring.co.uk

35

Dimensions

205mm

Technical

Specification

kW

variant

7.2

8.5

9.5

Operating water pressure 0.7-7bar (10-100psi) I Water pressure operated power switch I Water connection - standard 15mm inlet connection I Top, bottom or rear cable entry options I Removable corner section for ease of installation. kW loading at 230-240V

6.6 - 7.2

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

4 - 6mm 2

6 - 10mm

2

6 - 10mm 2

Recommended fuse ratings

30 amps

40 amps

45 amps

36 Technical 0844 372 7766 Sales 0844 372 7750

Expressions 500S

Smart Technology Electric Showers

Developed with contemporary ‘S-line’ styling, smart technology and a convenient start/stop button, the best selling Expressions

500S allows the power and flow rate setting to remain set ready for your next shower.

Application

Family showering.

Key Features

Separate rotary control for power selection I

Push - button stop/start, for ‘set and forget’ convenience I 3 power settings with ‘Power On’,

‘Power Medium’ and ‘Power High’ neon indicators I

Top, bottom or rear entry access for cable and cold water supply I Removable corner section for ease of installation.

Safety Features

Fully temperature stabilised I Smart Time

®

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures cool-start use I

Rotary flow/temperature control with numerical indicator window I Overheat LED indicator.

Outer Casing

Polar white I High impact I Easy clean I

Scratch resistant I Thermoplastic.

Accessories

Pressure

Approvals

Guarantee*

Chrome 6 mode rub-clean handset and full accessory kit: Soap dish I Hose with retaining ring I Riser rail I

Adjustable clamp I See page 54 for further accessories.

Operating pressure - 0.7bar to 7bar.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Expressions 500S 7.2kW EX5007S

Expressions 500S 8.5kW EX5008S

Expressions 500S 9.5kW EX5009S

Extended Control Lever LEV2

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53672501

53673001

53673501

See page 54

www.redring.co.uk

37

Dimensions

210mm 70

Technical

Specification

kW

variant

8.5

9.5

Operating water pressure 1-10bar (14.5-145psi) I Water pressure operated power switch I Water connection - 15mm plain shank push fit or standard compression fittings I Top, bottom or rear cable entry I

Top, bottom or rear water entry I Product has a removable side section for ease of installation.

kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

6 - 10mm 2

6 - 10mm

2

Recommended fuse ratings

40 amps

45 amps

38 Technical 0844 372 7766 Sales 0844 372 7750

Slimline 620

White Ultra Slim Electric Showers

Packed full of features, the 620 with its ultra slimline profile, timed phased shutdown, overheat protection and multi-mode handset is an ideal choice for upgrading or replacing existing shower installations to generate more space in a shower cubicle.

Application

Key Features

Day to day showering.

Ultra slimline profile I Push button for on/off selection I

Rotary power select I Multi-service points for ease of installation I Rotary flow/temperature control I

4 power settings.

Safety Features

Fully temperature stabilised I Overheat protection I

Smart Time

®

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures cool-start use.

Outer Casing

Accessories

Pressure

Approvals

Guarantee*

Polar white I High impact I Easy clean I

Scratch resistant I Thermoplastic.

White accessory kit: Rub-clean, multi-mode handset I

3 position variable spray head I Soap dish I Riser rail I Hose with retaining ring I Adjustable clamp I

See page 54 for further accessories.

Operating pressure - 1.0bar to 10bar.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Slimline 620 8.5kW R6208

Slimline 620 9.5kW R6209

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53555201

53556201

www.redring.co.uk

39

Dimensions

205mm

Technical

Specification

kW

variant

7.2

8.5

Operating water pressure 0.7-7bar (10-100psi) I Water pressure operated power switch I Water connection - standard 15mm inlet connection I Top, bottom or rear cable entry options I Removable corner section for ease of installation. kW loading at 230-240V

6.6 - 7.2

7.8 - 8.5

Recommended cable sizes

4 - 6mm 2

6 - 10mm

2

Recommended fuse ratings

30 amps

40 amps

40 Technical 0844 372 7766 Sales 0844 372 7750

Active 350S

White Dual Concentric Control

Electric Showers

The Active 350S allows accurate temperature selection.

Developed with contemporary ‘S-line’ styling and smart technology, the integral water control valve provides on/off selection via the outer control knob, allowing the flow rate/ temperature position to remain at your favourite setting from your last shower.

Application

Day to day showering.

Key Features

3 power settings I Separate controls for temperature adjustment and power selection I Neon power indicator.

Safety Features

Fully temperature stabilised I Smart Time

®

phased shutdown - electronic flushing of residual hot water which reduces scale and ensures cool-start use I

Rotary control for on/off and power selection I

Overheat protection I Electric solenoid operation on/off

I Temperature and flow control with single turn valve I

Removable corner section for ease of installation.

Outer Casing

Accessories

Pressure

Approvals

Guarantee*

Polar white I High impact I Easy clean I

Scratch resistant I Thermoplastic.

Chrome accessory kit: 3 position variable rub-clean spray head I Soap dish I Hose retaining ring I Riser rail I Height adjustable clamp I See page 54 for further accessories.

Operating pressure - 0.7bar to 7bar.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Active 350S 7.2kW A3507S

Active 350S 8.5kW A3508S

Extended Control Lever LEV3

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53671501

53672001

See page 54

www.redring.co.uk

41

Dimensions

205mm

Technical

Specification

kW

variant

7.2

8.5

Operating water pressure 0.7-7bar (10-100psi) I Water pressure operated power switch I Water connection - standard 15mm inlet connection I Top, bottom or rear cable entry options I Removable corner section for ease of installation. kW loading at 230-240V

6.6 - 7.2

7.8 - 8.5

Recommended cable sizes

4 - 6mm 2

6 - 10mm

2

Recommended fuse ratings

30 amps

40 amps

42 Technical 0844 372 7766 Sales 0844 372 7750

Active 320S

White Dual Control Electric Showers

The Active 320S has a unique dual control, combining power select and on/off rotary flow/temperature control. Developed with contemporary ‘S-line’ styling and smart technology this shower comes complete with single mode handset and riser rail kit all in chrome.

Application

Key Features

Day to day showering.

3 power settings with neon power on indicator I Top, bottom or rear entry access for cable and cold water supply.

Safety Features

Fully temperature stabilised with ‘Smart Stop

®

’ hot water purge reducing scale and ensuring cool start I Dual concentric rotary controls for on/off and power selection I Electric solenoid operation on/off I

Overheat protection I Temperature and flow control with single turn valve I Removable corner section for ease of installation.

Outer Casing

Polar white I High impact I Easy clean I

Scratch resistant I Thermoplastic.

Accessories

Pressure

Approvals

Chrome accessory kit: Single mode rub-clean handset

I Soap dish I Hose retaining ring I Riser rail I

Height adjustable clamp I See page 54 for further accessories.

Operating pressure - 0.7bar to 7bar.

BEAB Approved I CE.

Guarantee*

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Active 320S 7.2kW

Active 320S 8.5kW

Extended Control Lever

A3207S

A3208S

LEV3

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53670501

53671001

See page 54

www.redring.co.uk

43

Dimensions

264mm 101

Technical

Specification

Operating water pressure 0.7-10bar (10-145psi) I Cable entries: top, bottom and rear (up to 16mm

2

) I Pipe entries - top, bottom and rear

(on right hand side) I Water connection - 15mm inlet connection.

kW

variant

8.5

9.5

10.8

kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

9.9 - 10.8

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

10 - 16mm

2

Recommended fuse ratings

40 amps

45 amps

45 amps

44 Technical 0844 372 7766 Sales 0844 372 7750

Selectronic Premier

State of the Art

Thermostatic Electric Showers

The Selectronic Premier range of thermostatic showers are the very epitome of control, performance and safety. With unique microprocessor control technology and an array of advanced features, the Selectronic Premier represents the very latest in family showering innovation. Stylish and good looking, the range is available in three different versions, including one with a user friendly wireless remote control.

Application

Outer Casing

Accessories

Care sector showering.

Key Features

One touch operation I Large tactile, easy to press buttons I Large LED digital readout display I Audible feedback response to commands I Independent temperature adjustment I Eco Water-Save feature that automatically calculates and adjusts the optimum flow rates meeting the ‘Sustainable Homes’ water consumption requirements▲ I Eco Power-Save feature that automatically adjusts the power of the shower to achieve the selected water temperatures▲ .

Safety Features

Fully thermostatic operation - maintains temperature within +/- 1°C I Pre-programmed to provide automatic hot water at a constant and safe temperature I

Temperature ‘Lock Mode’, with three optional settings - eliminating any increase by accident▲ I Matt antiglare label backing I Audible feedback response to commands I Phased shutdown - reducing scale and ensuring cool-start for next user I Automatic shutdown after 30 minutes of inactivity.

White I High impact I Easy clean I Thermoplastic I

Scratch resistant I Matt antiglare surface finish to control area.

Curved white 6 pattern rub-clean handset I 0.45m riser rail I Adjustable handset holder I Soap dish I

1.25m easy clean smooth shower hose.

Operating pressure - 0.7bar to 10bar.

Pressure

Approvals

Guarantee*

BEAB CARE I BEAB Approved I WRAS Approved I

RNIB product endorsement I RNIB Inclusive Design status I Disabled Discrimination Act compliant I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Selectronic Standard 8.5kW SELP85S

Selectronic Plus 8.5kW

Selectronic Remote 8.5kW

SELP85P

53677501

53677505

SELP85PR 53677510

Selectronic Standard 9.5kW SELP95S

Selectronic Plus 9.5kW SELP95P

Selectronic Remote 9.5kW

53678501

53678505

SELP95PR 53678510

Selectronic Standard 10.8kW SELP108S 53679501

Selectronic Plus 10.8kW SELP108P 53679505

Selectronic Remote 10.8kW SELP108PR 53679510

* Terms and conditions apply.

Selected on installation. Visit www.redring.co.uk for full details.

www.redring.co.uk

45

Dimensions

265mm 84

Technical

Specification

kW

variant

8.5

9.5

10.8

Operating water pressure 0.7-10bar (10-145psi) I Cable entries: top, bottom and rear (up to 16mm

2

) I Pipe entries - top, bottom and rear

(on right hand side) I Water connection - 15mm plain shank tails, push fit or standard compression fittings I Accessories - soap dish has removable insert for easy cleaning. kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

9.9 - 10.8

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

10 - 16mm

2

Recommended fuse ratings

40 amps

45 amps

45 amps

46 Technical 0844 372 7766 Sales 0844 372 7750

Selectronic & Selectronic Plus

State of the Art Thermostatic

Electric Showers

Endorsed by the RNIB and selected for Inclusive Design status, these instantaneous showers are the most technologically advanced available from Redring and are the preferred choice of the blind, partially sighted, young children, elderly and less able. Pre-programmed to provide hot water at a comfortable and safe temperature, in lock mode the heat is capped at 40°C, with cooler adjustment; no accidental increase is possible.

Application

Care sector showering.

Key Features

One-touch operation I Large tactile, easy to press buttons I Independent adjustment for temperature and water flow rate I Large LED digital readout I

Automatic shutdown after 30 minutes of inactivity I

High-visibility shower head and clamp.

Safety Features

Fully thermostatic - adjusting power and water flow to selected temperature I Safety temperature lock 40°C with override I Phased shutdown - reducing scale and ensuring cool-start use I Audible feedback response commands I Matt antiglare label backing.

Outer Casing

White I High impact I Easy clean I Scratch resistant

I Thermoplastic.

Accessories

Pressure

Approvals

Guarantee*

Curved white 6 pattern rub-clean handset I Soap dish

I 0.45m riser rail I Adjustable handset holder I High quality 1.25m chrome shower hose I (Selectronic Plus

- as above but with 1m riser rail and 2m smooth white hose).

Operating pressure - 0.7bar to 10bar.

BEAB CARE I BEAB Approved I RNIB product endorsement I RNIB Inclusive Design status I

Disabled Discrimination Act compliant I WRAS

Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code

Selectronic 8.5kW

Selectronic 9.5kW

Selectronic 10.8kW

Selectronic Plus 8.5kW

SEL85S

SEL95S

SEL108S

SEL85P

Selectronic Plus 9.5kW SEL95P

Selectronic Plus 10.8kW SEL108P

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

53557001

53558001

53559001

53557005

53558005

53559005

www.redring.co.uk

47

Dimensions for Shower and Level Access Pump

265mm 84

236mm

Technical

Specification

kW

variant

8.5

9.5

150mm

Operating water pressure 0.7-10bar (10-145psi) I Cable entries: top, bottom and rear (up to 16mm

2

) I Pipe entries - top, bottom and rear

(on right hand side) I Water connection - 15mm plain shank tails push fit or standard compression fittings I Accessories - soap dish has removable insert for easy cleaning.

kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

6 - 10mm 2

6 - 10mm

2

Recommended fuse ratings

40 amps

45 amps

48 Technical 0844 372 7766 Sales 0844 372 7750

Selectronic Plus complete with Level Access Pump

Thermostatic Shower and Pump Pack

Where a gravity drain is not an option, this shower and pump pack provides a solution. The Selectronic shower controls the level access drain pump directly, removing the need to fit a separate flow switch and associated wiring. Selectronic is endorsed by the RNIB and meets all the latest additional safety standards required for care establishments and less able users.

Application

Care sector showering.

Key Features

Shower and pump in a pack I Reduced installation time - shower controls pump directly so no requirement for separate flow switch/associated wiring I Meets the

Disability Discrimination Act (DDA) I ‘Inclusive

Design’ status, endorsed by RNIB I One-touch operation I Large, tactile, easy to press buttons I

Large LED digital readout I Clear print independent adjustment for temperature and water flow rate I

Hi-visibilty colour coded showerhead & clamp I

Automatic shutdown - after 30 minutes of inactivity

I Additional time delay adjustment for pump start-up

& over-run I Minimal maintenance - diaphragm (not impeller) pump action - removes residual shower waste

(hair, grit, gel) without blocking.

Safety Features

Thermostatic - adjusting power and water flow to selected temperature I Safety temperature lock 40°C, with override I Phased shutdown - reducing scale and ensuring cool-start use I Audible feedback response commands I Low voltage pump for safe operation I Matt antiglare label backing.

Outer Casing

Accessories

Pressure

Approvals

Guarantee*

Thermoplastic I High impact I Easy clean I

Scratch resistant.

Multi-mode, rub-clean handset, 1m riser rail I

Adjustable handset holder I Soap dish I 2m shower hose

Operating pressure - 0.7bar to 10bar.

BEAB CARE I BEAB Approved I RNIB product endorsement I RNIB Inclusive Design status I

Disabled Discrimination Act compliant I WRAS

Approved I CE.

Shower - 3 year (UK) I Pump - 2 year guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Selectronic CWP 8.5kW SEL85LAP 53557090

Selectronic CWP 9.5kW SEL95LAP 53558090

* Terms and conditions apply. Visit www.redring.co.uk for full details.

www.redring.co.uk

49

Schematic of Typical Installation Pack Contents

in one box including 2m hose and 1m riser rail

Pump Shroud Shower Drain Pump

Pump Overview

Combined in harmony with the Selectronic shower, the Level Access Pump uses a diaphragm

(not impeller) pump action, and easily removes all residual shower waste including hair, grit and gel - without blocking. With an additional time delay adjustment for start-up and over-run, this level access drain pump allows for the perfect modern wetroom to be installed almost anywhere.

Technical (Cont.d) NB:

The Selectronic shower variant for use with the Selectronic pump system is fully, third party, approved by BEAB to EN 60 335-1: 1995 (Safety of household and similar electrical appliances) and

EN 60 335-2-35 (The particular requirements for instantaneous water heaters).

50 Technical 0844 372 7766 Sales 0844 372 7750

Pump Wall Plate

Shower Trap

Shower Drain Pump

Control Unit

x2

Shroud Cover Screw

x2

15 mm Speedfit

Connector

x2

22 mm Speedfit

Connector

32 mm Reducer

19 mm Reducer

• Selectronic thermostatic shower including 2m hose and 1m riser rail

• Pump shroud

• Shower drain pump

• Pump wall plate

• Shower trap

• Shower drain pump control unit

• Shroud cover screws (x 2)

• 15mm speedfit connectors (x 2)

• 22mm speedfit connectors (x 2)

• 32mm reducer

• 19mm reducer

www.redring.co.uk

51

Selectronic Thermostatic Shower including 2m hose and 1m riser rail

Pump Shroud Shower Drain Pump

Pump Wall Plate

Shower Trap

Shower Drain Pump

Control Unit x2

Shroud Cover Screw x2

15 mm Speedfit

Connector x2

22 mm Speedfit

Connector

32 mm Reducer

19 mm Reducer

Dimensions and Application

240mm 113

52

Technical

Specification

kW

variant

8.5

9.5

Cold water cistern fed I Operating water pressure - 3” minimum head to 33’ maximum head (0.08m to 10m) I Top, bottom and rear water and cable entry options I 15mm push-fit fitting for cold water inlet connection I The unit incorporates a 240V 140W AC motor to boost flow I Maximum flow rate - 7.0 litres/min I Accessories - soap dish has removable insert for easy cleaning. kW loading at 230-240V

7.8 - 8.5

8.7 - 9.5

Recommended cable sizes

6 - 10mm

2

6 - 10mm 2

Recommended fuse ratings

40 amps

45 amps

Technical 0844 372 7766 Sales 0844 372 7750

Expressions 570

White Integral Pumped Electric Showers

The Expressions 570 provides the convenience of electric showering in areas where no mains water, or low water pressure, prevents the use of normal electric instant showers.

By combining a standard electric shower and booster pump, this shower can simply be connected to a cold water header tank.

Application

Family showering.

Key Features

Instant electric shower with integral pump to ensure constant water flow I High and low power selection I

Rotary control for temperature/flow selection I Ideal for installations where water pressure is insufficient for an instant shower I Cold water cistern fed (not mains).

Safety Features

Power on and overheat neon indicators I

Overheat protection.

Outer Casing

Polar white I High impact I Easy clean I

Scratch resistant I Thermoplastic.

Accessories

Pressure

Approvals

Guarantee*

Full set of white and chrome accessories: Premium wide spray multi-mode handset I Soap dish I Riser rail I Hose with retaining ring I Adjustable clamp I

See page 54 for further accessories.

Cold water cistern fed - operating water pressure: 3” or

0.08m minimum head to 33’ or 10m maximum head.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Expressions 570 8.5kW

Expressions 570 9.5kW

EXP5708

EXP5709

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

24555515

24556015

www.redring.co.uk

53

Helena Jessica Isobella

Maria Viola

Electric Shower Accessories

Consistent, all year round shower performance in a range of models to satisfy individual bathroom style requirements.

Designed to fit any electric shower, these Accessory Packs contain a shower head, riser rail, brackets, handset holder, soap dish and hose.

Replacement

1.25 or 2m hoses I Available in white or chrome

Shower Hoses:

- contact our spares department on 0844 372 7750.

Shower Heads:

Multi-mode shower head packs to fit any electric shower I Available in white or chrome - contact our spares department on 0844 372 7750.

Standard

Multi-mode shower head, riser rail, brackets, handset

Accessory Pack:

holder, soap dish and hose I Available in white.

Extended Riser:

The 1 metre extended length riser rails bring the shower head and soap dish within easy reach of children, the elderly or the less-able and are available in white or chrome, in 18 or 22mm diameter.

Complete

Care Pack:

For all instant showers to assist less able users.

Includes brackets, multi-mode handset, handset clamp, soap dish and hose retainer with 2m hose and 1m riser rail.

Curtain Rail

Pack

Lever

Ext. Shower

The versatile curtain rail pack is designed to fit virtually any shape of bathroom. Contains a white curtain, curtain rail, corner fittings, curtain clips and full fixing kit. Available with or without a non-slip bath mat.

Ideal for children or the less-able, this extended Control shower control lever is interchangeable with and 320S (LEV3).

Expressions 550S and 500S (LEV2) and Active 350S

Extended Control Lever Complete Care Pack

Product Range

Product Reference

Helena -

Chrome accessory kit with curved riser and 6 mode handset

Jessica -

Chrome accessory kit with straight riser and 6 mode handset

Isobella -

Chrome accessory kit with straight riser and 3 mode handset

Maria -

Chrome accessory kit with straight riser and single mode handset

Viola -

Full white accessory kit with straight riser and 3 mode handset

Complete care pack

Extended control lever

Extended control lever

Grab rail (plastic)

Curtain and rail pack with fixings

Curtain and rail pack with fixings and non-slip bathmat

Extended 1m riser rail

54 Technical 0844 372 7766 Sales 0844 372 7750

Short Code

ACCPKE

ACCPKD

ACCPKC

ACCPKB

ACCPKA

CCP1

LEV2

LEV3

PGR

CU1

CU2

RAILC2

Suitable for Colour Cat. No

All installations Chrome 83595320

All installations Chrome 83595319

All installations Chrome 83595318

All installations Chrome 83595317

All installations White

All installations White

83595321

83595322

Expressions

Active

White

White

All installations White

83595324

83595325

83595315

All installations White

All installations White

83792812

83792811

All installations Chrome 83595323

www.redring.co.uk

55

Dimensions and Installation

227mm 124

Technical

Specification

Motor rating - 140 watts @ 240V I Mains supply - 220-240V supply

I Top, bottom or rear cable entry I Top, bottom or rear water entry I

Accessories - soap dish has removable insert for easy cleaning.

Model Flow rate Mixing

variant on full chamber

520M 14 lit/min Manual Cartridge

Min. head

Max. head

3” / 0.08m 33’ / 10m

520TS 12 lit/min Thermostatic Cartridge 3” / 0.08m 33’ / 10m

56 Technical 0844 372 7766 Sales 0844 372 7750

Expressions 520TS & 520M

Power Showers

The Expressions 520 range delivers luxury showering performance from an integrated booster pump and mixer valve in a simple to plumb installation. Taking both hot and cold water from the cylinder and header tank respectively, the integral pump delivers up to a maximum of 14 litres per minute.

The Expressions 520TS unit incorporates fully thermostatic performance.

Application

Family showering.

Key Features

Electric power shower I On/off flow control I

Multi-entry options I Push-fit pipe connections I

Separate temperature control.

Safety Features

Adjustable temperature limiter with override feature I

TS model only: Thermostatic power shower, thermostatic control and operation.

Outer Casing

Polar white I High impact I Easy clean I

Scratch resistant I Thermoplastic.

Accessories

Full set of white and chrome accessories: Premium wide spray multi-mode handset I Soap dish I Hose with retaining ring I Riser rail and adjustable clamp.

Pressure

Approvals

Gravity fed - operating water pressure: 3” or 0.08m minimum head to 33’ or 10m maximum head.

BEAB Approved I CE.

Guarantee*

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Expressions 520M EXM520WC

Expressions 520TS EXTS520WC

* Terms and conditions apply. Visit www.redring.co.uk for full details.

M - Manual I TS - Thermostatic

Cat. No

46598415

46599415

www.redring.co.uk

57

Dimensions

60mm

Fixing point

CEILING

Fixing point

107mm

190mm

Technical

Specification

15mm copper pipes I Suitable for all connections including push-on

I Pipes rotate for easy alignment compression and soldered joints

I Overall height: 1100mm I Suitable for rooms with ceiling heights of up to 2.5 metres I Pressures from 0.1bar (1 metre head) to 7bar I

Maximum hot to cold pressure differential should NOT exceed 2bar at higher pressures or 0.2bar at very low pressures I For pressures in excess of 7bar a pressure regulator should be fitted I Multi-function showerhead for pressures 0.2 - 7bar, single-function showerhead for

0.1 - 7bar especially gravity fed sites.

58 Technical 0844 372 7766 Sales 0844 372 7750

Selectronic Mixer

TMV3 Thermostatic Mixer Shower

Ideal for retrofit or brand new installations, the Selectronic

Mixer, a TMV3 thermostatic shower features sleek design, including a patented ‘through the ceiling’ water connection - for one of the quickest installation times on the market. Built using the highest quality components this shower fits to just about any plumbing system, on virtually any pressure, with automatic shutdown if the water supply fails.

Application

Designer showering.

Key Features

Simply connect to water supplies within roof cavity I

Includes pre-assembled hot and cold feed pipes plus isolating valves with filters I Surface mounted for minimal bathroom disruption - no channel pipe to cut I

No tile or wall cutting required I Quick to install - only two fixings needed I UK design and manufacture - hot and cold water supplied down riser rail I Compatible with just about any plumbing system.

Safety Features

Thermostatic I TMV3 certified I Automatic shutdown if cold or hot water supply fails I Safety button override for hotter shower.

Outer Casing

All metal construction in chrome plated solid brass, including the fittings, for strength and durability.

Accessories

Pressure

Approvals

Full set of all chrome accessories: Multi-mode rub- clean handset I 3 position variable spray head I Soap dish I Hose with retaining ring I Riser rail I

Adjustable clamp.

Operating pressure - 0.1bar to 7bar.

WRAS Approved product I TMV3 scheme certified.

Guarantee*

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Selectronic TM SLT1

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

36598201

www.redring.co.uk

59

Dimensions

150mm

285mm

Technical

Specification

I

Will suit: low, mains, pumped, unequal and gravity water pressure systems I Running water pressure 0.1bar to 5.0bar max. I Maximum static water pressure 10bar I Handset height adjustment 530mm (22”)

Standard 15mm inlet connection.

Bar Thermostatic Mixer

Thermostatic Mixer Shower

The Bar Mixer combines traditional design, contemporary technology and economical pricing and with dual controls, for separate temperature and independent flow adjustment, this thermostatic mixer has built-in temperature safeguards and offers first-rate performance. It recognises and compensates for changes in water pressure and temperature, mixing accordingly, to maintain desired selected shower. It is also easy to install and requires no electrical connections.

Application

Day to day showering.

Key Features

Uses COLD water from storage tank and stored HOT water from the cylinder I Easy-grip control increases and decreases flow I Easy-grip independent temperature controls I Adjustable inlet elbows for ease of installation.

Safety Features

Thermostatic temperature control I Numerical temperature indicator I Maintains temperature to + or

-2°C I Temperature limiter factory set at 38°C I

Discreet temperature override button facility.

Outer Casing

Chromed brass.

Accessories

Pressure

Guarantee*

Chrome multi-mode handset provides 3 different spray options I Crystal clear detachable soap dish for easy cleaning I 1.25m (4ft) flexible hose with retaining ring, riser rail and adjustable clamp.

Operating pressure - 0.1bar to 5.0bar.

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Bar TM BTM1

* Terms and conditions apply. Visit www.redring.co.uk for full details.

Cat. No

36594240

60 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

61

Water Heating

Range Profile in Detail

Electric Flow Boilers

Powerstream

Ascari

Central Heating and Hot

Water Flow Boiler

Min.

Max.

Storage

Tank

Page 66

Powerstream

Professional

Central Heating, Underfloor and Hot

Water Flow Boilers

Min.

Max.

Page 70

Unvented Water Storage Heaters

Aqualoy

LWSS Range

90-300 litre Stainless Steel Unvented Water

Storage Heaters

Min.

Max.

Cylinder

Page 74

Aqualoy

MWSS

Page 78

30-75 litre Stainless Steel Unvented Water

Storage Heaters

Cylinder

Aqualoy

SWSS TP

Page 80

Aqualoy

SWSS

Page 82

MW

7-15 litre Stainless Steel Unvented Water

Storage Heaters

Cylinder

7-15 litre Stainless Steel Unvented Water

Storage Heaters

Cylinder

10-15 litre Unvented Water

Storage Heaters

Page 86

EW

10-15 litre Unvented Water

Storage Heaters

Page 88

Immersion Heaters & Controller

Domestic

Immersion

Heaters

Page 90

Aqualoy and Copper Water

Immersion Heaters

Aqualoy Copper

Industrial

Immersion

Heaters

Page 92

Incoloy 825 Industrial Water

Immersion Heaters

Min.

Max.

Immersion

Heater

Controller

Page 94

Economy 7 Time Controller

62 Technical 0844 372 7766 Sales 0844 372 7750

Vented Water Storage Heaters

Flatback

Cistern

25-100 litre Vented Water

Storage Heaters

Page 96

Contour 7000

7 litre Slimline Vented Water Storage

Heaters

Min.

Max.

Page 98

WS10

10 litre Vented Water Storage Heater

Page 100

WS7-EcoT

Page 102

WS7

7 litre Vented Water Storage Heaters with 24 hour, 7 day programmable timer

7 litre Vented Water Storage Heaters

Min.

Max.

Page 104

WS5

5 litre Vented Water Storage Heater

Page 106

Unvented Instantaneous Water Heaters

Powerstream

Unvented Instantaneous Water

Heaters

Min.

Max.

Page 108

Powerstream

3 Phase Plus

Page 110

Eco 3-phase Unvented Water Heaters

Min.

Max.

Storage

Tank

www.redring.co.uk

63

Water Heating Selector

Choosing the right water heating product is vitally important.

At Redring, customer support begins before you even buy!

This selector should enable you to make a decision, but if you require assistance, please ring our customer techline on

0844 372 7766 for further information.

Central Heating

Hot Water for Single

Outlet and Basins

Instantaneous Vented Unvented

Choose from

Redring’s range of Electric Flow

Boilers and Large

Unvented Water

Storage Heaters

Choose from

Redring’s range of Instantaneous

Water Heaters and Hand

Washing Units

Choose from

Redring’s range of Vented Water

Storage Heaters

Choose from

Redring’s range of Small

Unvented Water

Storage Heaters

Powerstream 66

Ascari

Powerstream 108 Contour

7000

98

106

Aqualoy

SWSS TP

Powerstream 70

Professional

Aqualoy

LWSS

74

Autosensor 124

(Washrooms)

Instant 3

(Washrooms)

126

WS10

WS7-EcoT 102

100 Aqualoy

SWSS

MW

Instant 7

(Washrooms)

126 WS7

WS5

104

EW

80

82

86

88

64 Technical 0844 372 7766 Sales 0844 372 7750

Application Demand

Hot Water for Multi-outlets and Basins

Instantaneous Vented Unvented

Choose from

Redring’s range of Instantaneous

Water Heaters

Choose

Redring’s Large

Vented Water

Storage Heater

Choose from

Redring’s range of Small to

Medium Unvented

Water Storage

Heaters

Powerstream 108

Powerstream 110

3 Phase Plus

Flatback

Cistern

96 Aqualoy

MWSS

Aqualoy

SWSS TP

Aqualoy

SWSS

MW

EW

78

80

82

86

88

www.redring.co.uk

65

Min.

Max.

Storage Tank Components

Dimensions and Application

405mm 280mm

10 10

Technical

Specification

Electrical

Maximum power 4-12kW I Includes 8 litre expansion vessel, 3bar pressure relief valve and 3-speed pump for quick easy install I 7

-segment digital displays of temperature and pressure I Graduated power on/off reduces instantaneous loads I Frost protection 5°C minimum system temperature I 5 litre water storage I Pump protection, prevents pump sticking I Stainless steel elements I

Operating pressure 0.5bar - 3bar I Top or bottom cable entry I NB:

Please see page 72 for further technical details.

The Powerstream Ascari should be permanently connected to the electrical supply through a double linked switch with minimum breaking capacity for the loading. All wiring should be installed to conform to the current edition of the IEE Wiring Regulations.

66 Technical 0844 372 7766 Sales 0844 372 7750

Powerstream Ascari

Central Heating and Hot Water Flow Boiler

This electric boiler is 99% efficient and provides a versatile and safe way of heating water wherever there’s mains electricity.

Suitable for unvented wet central heating and domestic hot water systems, the Powerstream Ascari electric boiler can be used as a direct replacement for Gas, Oil, Propane, Solid Fuel or Electric Storage heating*. The Powerstream Ascari boiler also provides maximum flexibility as it does not require costly servicing, safety checks or a flue.

Application

Central heating and hot water.

Key Features

Integral circulation pump and expansion vessel I

Suitable for sealed and open vented systems, with radiators or underfloor heating I Choice from 12,

8, 6 or 4kW on installation I Compact design - fits into most spaces (including kitchen cupboards) I Low maintenance - no requirement for annual service or safety check (5 year check).

Selectable heating system water temperature, 21°C -

80°C - allows low energy setting of heating I Cast iron engine for therma stability I Ideal for well insulated properties of up to 80m rapid response.

2

I 5 litre water storage, for

Safety Features

Min/max control adjusts the water temperature output from the boiler I No flue and no fuel tanks give a safe and flexible installation.

Rating

Element

4kW, 6kW, 8kW and 12kW options at installation (230V).

Stainless steel.

Outer Casing

White steel casing.

Pressure

Operating pressure - 0.5bar to 3bar.

Approvals

Guarantee

CE.

3 year guarantee on storage tank and 2 years on components (UK).

Product Range

Product Reference

Powerstream Ascari

* Building Regulations apply.

Short Code

PSA12

Cat. No

45551860

www.redring.co.uk

67

Plumbing Schemes

Heating only

TA

TA

OR

TA

Radiators or floor heating system

Heating and domestic hot water

TA

TA

OR

TA

Cylinder Thermostat

Radiators or floor heating system: the mixing valve is not required

R

R

Complementing an alternative energy system

Solar Panel

R

Heating

Output

R

Key

R

Programmer and room thermostat

3-way valve

TA

Input

TA

R

To maintain heating temperature when alternative energy source cannot supply enough heating

Water pump

R

R

Regulator

Simple to use controls with digital display

• Intelligent operation for comfort and reduced energy use

• System water temperatures can be selected at install or the Ascari can auto-adapt to the requirements of the property, adjusting the water temperature to the optimum setting to reduce energy consumption and smooth the property temperature

Temperature display heating water (in °C)

Boiler operating LED

Increase system temperature command

Decrease system temperature command

Heating temperature command

On/off command

Operating mode selector

Heating circuit water pressure display (bar)

68 Technical 0844 372 7766 Sales 0844 372 7750

Controls

The Powerstream Ascari boiler has been designed to provide the highest temperature stability and energy consumption possible from an electric boiler. Its 5 litre storage and high thermal mass reduce system cooling,

while its electronic temperature function keep the room

at a stable temperature using the least amount of

electrical energy.

Filling Loop

The Powerstream Ascari is not fitted with a filling loop.

Any filling loop being fitted should comply with the

Water Supply (water fittings) Regulations 1999 Section

G24.1 and G24.2. A filling loop should be fitted at some point to allow the CH system to be filled.

Parallel

Operation

Hot Water

Storage

For larger properties, multiple boilers may be installed in parallel.

Ask for the Redring Aqualoy LWSS 2304 Duplex

Stainless Steel water storage heaters that provide effective, fast and safe hot water for baths, showers and other domestic appliances around any property. For use with direct and indirect heating applications the Aqualoy

LWSS cylinders are a high quality vessel employing the best in tig welding technology, the LWSS range also features high flow rates and energy efficient insulation.

www.redring.co.uk

69

Min.

Max.

Dimensions

86

238mm

386mm

Technical

Specification

Thermostatic temperature range 30°C to 55°C (underfloor) or 55°C to

80°C (central heating) I UK manufactured in a BS EN ISO 9001:2008 registered factory I NB: Please see over page for further technical details and sizing guidance.

Boiler Temp. BTU kW loading Cable size Fuse rating

variant range output @ 230-240V guide guide

RFB2

RFB4

30 - 80

30 - 80

6830

13660

1.8 - 2

3.7 - 4

RFB6 30 - 80 20490 5.5 - 6

RFB75 30 - 80 25613 6.9 - 7.5

1.5mm

2 13 Amps

2.5 / 4mm 2 20 Amps

4mm

2

30 Amps

4 / 6mm 2 35 - 40 Amps

RFB9 30 - 80 30735 8.3 - 9 6 / 10mm

2

40 - 45 Amps

RFB105 30 - 80 35860 9.6 - 10.5 6 / 10mm 2 45 Amps

RFB12 30 - 80 40980 11 - 12 10mm

2

50 Amps

70 Technical 0844 372 7766 Sales 0844 372 7750

Powerstream Professional

Central Heating, Underfloor and Hot

Water Flow Boilers

This electric flow boiler provides a versatile and safe way of heating water, where there’s mains electricity. Suitable for vented and unvented wet central heating, underfloor heating and domestic hot water, Powerstream Professional can be used instead of Gas, Oil, Propane, Solid Fuel or Electric

Storage heating*. 99% efficient, this boiler is highly flexible as no servicing, safety checks or flue are needed.

Application

Key Features

Central heating, underfloor heating and hot water.

7 power options (2kW - 12kW) I Compact design fits in most spaces (including kitchen cupboards) I Solid state technology for long-life I No moving parts, maximum reliability I Minimal service and maintenance costs I Suitable for sealed and open vented systems with radiators or underfloor heating I Uses standard radiators, programmer, pump, room stat and thermostatic radiator valves I Thermostatic range 30°C to 55°C (underfloor) or 55°C to 80°C (central heating).

Safety Features

Min/max control adjusts the temperature I No flue and no fuel tanks give a safe and flexible installation.

Rating

Element

2kW, 4kW, 6kW, 7.5kW, 9kW, 10.5kW & 12kW (240V).

Copper sheathed.

Outer Casing

White stove-enamelled corrosion-resistant steel.

Pressure

Operating pressure - 0.5bar to 3bar.

Approvals

BEAB Approved I CE.

Guarantee

2 year product guarantee (UK).

Product Range

Product Reference Short Code

Powerstream Pro 2kW

Powerstream Pro 4kW

Powerstream Pro 6kW

Powerstream Pro 7.5kW

RFB2

RFB4

RFB6

RFB75

Powerstream Pro 9kW RFB9

Powerstream Pro 10.5kW RFB105

Powerstream Pro 12kW

* Building Regulations apply.

RFB12

Cat. No

45670202

45670204

45670206

45670207

45670209

45670210

45670212

www.redring.co.uk

71

Technical

For Heating only, with Direct domestic hot water cylinder

For Underfloor Heating system

For Heating and domestic hot water & Indirect hot water cylinder

S Plan System Y Plan System

Selection Guide (Based on NHBC guidelines 1 )

Property

Type

Max. floor area Space Heating only

2

(m 2 /ft 2 ) New Build Older properties

1 room bedsit 20 / 200

2 room flat 40 / 400

RFB2

RFB4

RFB4

RFB6

1 bed house 80 / 800

2 bed house 100 / 1000

3 bed house 130 / 1400

4 bed house 150 / 1600

5 bed house 190 / 2000

RFB6

RFB6

RFB9

RFB9

RFB12

RFB105

RFB12 n/a n/a n/a

Property

Type

Space Heating & Indirect Hot Water

3

Tank (l) Wash New Build Older properties

1 room bedsit 50

2 room flat 115

1 shower

1 bath

RFB4

RFB75

RFB6

RFB9

1 bed house 115

2 bed house 115

3 bed house 115

4 bed house 140

5 bed house 200

1 bath

1 bath

1 bath

1 bath

2 baths

RFB9

RFB105

RFB12

RFB12 n/a n/a n/a n/a n/a n/a

NB:

1

In broad terms, stipulates minimum room temperatures and recovery times for typical hot water draw-offs

(New Build), 90W/m

2

2

Based on average space heating requirement of 45 W/m

(Older properties) recovery time of less than 3 hours.

3

2

Includes requirement for a complete tank full

Boiler sizing:

Please consult your installer/heating engineer/designer as to the correct size of the Powerstream Professional boiler. Size of the property, the insulation properties of the building itself, the local and seasonal weather conditions and exactly what the boiler will be required to heat, eg: heating and/or hot water will need to be considered. To discuss individual delivery and design requirements or for help with making your selection please call: Technical - 0844 372 7766

72 Technical 0844 372 7766 Sales 0844 372 7750

* Expansion kit not required on a vented system

Hot Water

Ask for the Redring Aqualoy LWSS 2304 Duplex

Storage

Stainless Steel water storage heaters that provide effective, fast and safe hot water for baths, showers and other domestic appliances around any property. For use with direct and indirect heating applications the Aqualoy

LWSS cylinders are a high quality vessel employing the best in tig welding technology, the LWSS range also features high flow rates and energy efficient insulation.

NB 1:

The Redring Powerstream Professional flow boiler is ideal for providing water to a domestic /light commercial wet central heating system. Where it is intended for use to provide hot water as well, it may be that an alternative direct source of heat is required, eg: immersion heater. This is to ensure compliance with NHBC guidelines and to provide hot water at all times.

NB 2:

The Redring Powerstream Professional flow boiler requires fitment of a circulating pump for underfloor and central heating applications. In the case of unvented applications an expansion kit will be required.

www.redring.co.uk

73

Min.

Max.

Cylinder Parts

Dimensions

B

A

B

Dimensions (mm)*

Min Max

750 1470

510 545

* Please see over page for full details of range dimensions.

Technical

Specification

Mains water supply essential I Min 1.5bar and a flow rate of

25 litres per minute I Operating pressure - 3bar I Pressure tested to

15bar I Expansionrelief valve set at 5bar I Temperature and relief valve set at 7bar at 90°C I Recommended cable size for all cylinders - 1.5mm

2

I Electrical connections are located on the front of the unit I Cold water inlet and hot water draw-off - 22mm I Coil flow and return - 22mm I

Temperature and pressure relief - 1/2” I Inlet group - 22mm I Tundish inlet - 15mm, outlet - 22mm (both compression) I 200 litre capacities and above are supplied with a secondary return connection I All ancillary components are supplied, allowing for easy, quick and hassle-free installation.

74 Technical 0844 372 7766 Sales 0844 372 7750

Aqualoy LWSS Range

90-300 litre Stainless Steel

Unvented Water Storage Heaters

Water heating cylinders that provide effective and fast, mains-fed, hot water for use with direct and indirect heating applications.

Employing the best in tig welding technology, the range features high flow rates and energy efficient insulation.

Application

Hot water storage.

Key Features

Long-life, incoloy, low noise immersion heaters I

High flow rate, up to 55l/min - ideal to supply power showers without the need for a separate pump I

Includes expansion vessel.

Safety Features

Pressure tested to 15bar I Expansion relief valve set at

5bar I Temperature and relief valve set at 7bar at 90°C.

Capacities

90, 125, 150, 170, 200, 250 and 300 litres.

Rating

Immersion heaters 3kW @ 240V (see below).

Outer Casing

Steel, wipe clean, white plastic coated finish and corrosion resistant base and lid.

Insulation

Energy efficient rigid polyurethane foam insulation.

Water Container

Duplex welded stainless shell with pressured domes.

Heat Unit

Primary Coil

Anode

Pressure

Approvals

Guarantee

Long-life Incoloy sheathed element.

Coil flow and return - 22mm (Indirect only).

No sacrificial anode required.

Operating pressure - 1.5bar to 3.5bar.

WRAS Approved Product I BEAB Approved I CE.

25 year cylinder and 2 year parts guarantee (UK).

Product Range

Product Reference Cat. No

LWSS90D

LWSS125D

LWSS150D

LWSS170D

LWSS200D

LWSS250D

LWSS300D

LWSS150i

LWSS200i

Capacity (l)

47788101 90

47788201 125

47788301 150

47788401 170

47788501 200

47788601 250

47788701 300

47788801 150

47788901 200

kW loading

2 x 3

2 x 3

2 x 3

2 x 3

2 x 3

2 x 3

2 x 3

1 x 3

1 x 3

www.redring.co.uk

75

Dimensions (cont.d)

Aqualoy LWSS

Direct

Domestic Selection Guide

Flexible siting

Multi-outlet siting

Aqualoy LWSS

Indirect

Key

½” TPR valve

1¾” IH boss

22mm hot water draw-off

22mm stat pocket

Secondary return

22mm cold feed

Cylinder Dimensions (mm)

variant* Height Diameter A

LWSS90D 750

LWSS125D 935

LWSS150D 1060

LWSS170D 1200

LWSS200D 1120

510

510

510

510

545

B C

150 180 400

D

-

150 180 400 -

150 180 400 -

E F

555 -

760

885

-

-

150 180 400 - 1030 -

150 180 400 820 995 -

LWSS250D 1330 545

LWSS300D 1470 545

LWSS150i 1060 510

LWSS200i 1120 545

150 180 400

150 180 400

150 180 380

150 180 330

980

480

1155 -

1100 1305 -

480 -

820

885

995

Cylinder

variant*

Capacity kW loading Expansion vessel

(litres) @ 240V capacity size (h x d)

LWSS90D 90

LWSS125D 125

2 x 3

2 x 3

8 litres

12 litres

300 x 200mm

255 x 265mm

LWSS150D 150

LWSS170D 170

LWSS200D 200

LWSS250D 250

2 x 3

2 x 3

2 x 3

2 x 3

12 litres

18 litres

18 litres

24 litres

255 x 265mm

380 x 265mm

380 x 265mm

430 x 285mm

LWSS300D 300

LWSS150i 150

LWSS200i 200

2 x 3

1 x 3

1 x 3

24 litres 430 x 285mm

12 litres 255 x 265mm

18 litres 380 x 265mm

* D - Direct, I - Indirect

76 Technical 0844 372 7766 Sales 0844 372 7750

Bedrooms Hot water demand

2 beds 1 shower

3 beds

1 bath, 1 shower

1 bath, 1 shower

4 beds

6 beds

1 bath, 1 shower

2 baths, 1 shower

Direct

125

155

170

200

250

2 baths, 1 shower 300

2 baths, 2 showers 300

3 baths 300

Indirect

n/a n/a

150i n/a

200i n/a n/a n/a

Siting Options

The structure supporting the heater must be capable of holding the weight of a cylinder when full with water.

Aqualoy LWSS

Duplex welded Stainless shell with pressured domes I For use with

Direct:

one or two electric immersion heaters (both included with the unit) for direct heating of the stored water I Can be used with peak rate and/or off peak tariff electricity supplies.

Aqualoy LWSS

Duplex welded Stainless shell with pressured domes I For use in

Indirect:

systems incorporating an indirect heater such as a gas fired boiler or electric flow boiler I Unit also includes one electric immersion heater for direct heating of the stored water.

Re-heat Performance

Requirement

Time to re-heat

Direct Indirect

90 125 150 170 200 250 300 150 200

after 70% draw-off 27 37 45 51 63 75 136 26 34

Time to re-heat from cold to 65 o

C 52 72 86 98 108 144 202 37 33

Weight when full (kg) 125 165 195 220 250 310 360 195 250

24hr heat loss (kWh) 1.1 1.6 1.9 2.1 2.3 2.5 3.1 1.9 2.3

www.redring.co.uk

77

Cylinder Parts

Dimensions

C

Min. 100mm

Hot water outlet

To taps

Cold water inlet

Min. 300mm

Technical

Specification

Heat up time 15°C to 65°C (minutes) - 30L/36, 50L/55, 75L/85 I

Weight when full (kg) - 30L/47, 50L/71, 75L/100 I Electrical supply

230V 50Hz direct connection to 13A fused isolation switch with 3mm min gap I Expansion vessel 5 litres I 15mm to 22mm Tundish.

Product Dimensions (mm)

variant A Height

(excl. T&P valve)

B Total Height

MWSS30 586

MWSS50 789

MWSS75 1093

665

860

1175

C Width

400

400

400

78 Technical 0844 372 7766 Sales 0844 372 7750

Aqualoy MWSS

30-75 litre Stainless Steel

Unvented Water Storage Heaters

Water heating cylinders that provide effective and fast, mains-fed hot water. These medium capacity, wall-mounted, stainless steel storage vessels are suited to medium usage situations, such as commercial sinks or even as prime hot water supply storage.

Application

Hot water storage.

Key Features

Premium insulation minimises heat loss I Medium capacity for higher water usage I Installation kit I

Expansion vessel I Thermostatic control provides water temperature 15°C - 68°C I Wall-mounted I

Stainless steel cylinder - 10 year warranty I No anode to service I Direct connection to cold mains water supply I High water flow rates I Incoloy elements.

Safety Features

Expansion relief pressure valve set at 6bar I

Temperature and pressure relief valve settings - Lift pressure 7bar I Lift temperature - 90°C I Thermal cut-out manual reset.

Capacities

Rating

30, 50 and 75 litre.

3kW @ 230V.

Outer Casing

Steel, wipe clean, white plastic coated finish and corrosion resistant base and lid.

Insulation

Injected foam - depth 30mm.

Water Container

316L stainless steel.

Heat Unit

Long-life Incoloy sheathed elements.

Thermostat

Anode

Thermostatic temperature control - 15°C-68°C.

No anode to service.

Pressure

Approvals

Guarantee

Operating pressure - 3bar.

Kiwa Approved Product I CE.

10 year cylinder and 2 year parts guarantee (UK).

Product Range

Product Reference

Aqualoy MWSS 30 litre

Aqualoy MWSS 50 litre

Aqualoy MWSS 75 litre

Short Code

MWSS30

MWSS50

MWSS75

Cat. No

47781760

47781761

47781762

www.redring.co.uk

79

Cylinder Parts

Dimensions

A

D

Dimensions (mm)

SWSS SWSS SWSS

TP7 TP10 TP15

A 291 291 291

B 338

C 364

D 286

Z 432

394

420

286

488

484

510

286

578

Technical

Specification

Heat up time 15°C to 65°C (minutes) - 7L/9, 10L/12 and 15L/18 I

Weight when full (kg) - 7L/13.5, 10L/17.2 and 15L/23.3 I Cold feed/hot draw-off connections - 15mm I Minimum recommended mains pressure

(performance reduces at lower pressure) - 1.5bar I Maximum working pressure - 6bar I Maximum water supply pressure - 16bar I Expansion relief valve set pressure - 6bar I Temperature & pressure relief valve settings - Lift pressure - 7bar, Lift temperature 90°C I Electrical supply -

230V 50Hz direct connection to 13A fused isolation switch with 3mm min gap I Recommendations are based on BS6700 - Actual water usage varies dramatically per application, the figures given are a guide only.

Where water saving devices are used the number of water outlets can be increased.

Installation Kits

See page 84 to determine what installation kit is required with your

SWSS TP heater. The installation will not comply with the Water

Regulations if the correct kits are not fitted.

80 Technical 0844 372 7766 Sales 0844 372 7750

Aqualoy SWSS TP

7-15 litre Stainless Steel Unvented

Water Storage Heaters

Water heating cylinders with temperature and pressure relief valves that provide thermostatically controlled, mains-fed, hot water up to 68°C. These smaller capacity cylinders are ideal for mounting under sinks or near to the point of use.

Application

Hot water storage.

Key Features

Factory fitted temperature and pressure relief valve I

Premium insulation minimises heat loss I Thermostatic control provides water temperature to 15-68°C I Wall mounted I Stainless steel cylinder - 10 year warranty I

No anode to service I Direct connection to cold mains I

High water flow rates I Ideal for low volume frequent

Safety Features

Temperature and pressure relief valve settings - Lift pressure 7bar I Lift temperature - 90°C I Thermal cut-out - 85°C manual reset.

Capacities

Rating

7, 10 and 15 litre.

3kW @ 230V.

Outer Casing

Steel, wipe clean, white plastic coated finish and corrosion resistant base and lid.

Insulation

Injected foam - depth 30mm.

Water Container

316L stainless steel cylinder.

Heat Unit

Incoloy elements.

Thermostat

Anode

Pressure

Approvals

Guarantee

Thermostatic temperature control - 15°C-68°C.

No anode to replace.

Maximum water supply pressure - 16bar.

Kiwa Approved Product I CE I BEAB Approved.

10 year cylinder and 2 year parts guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Aqualoy SWSS TP 7 litre

Aqualoy SWSS TP 10 litre

Aqualoy SWSS TP 15 litre

SWSS TP Expansion Kit

SWSSTP7 47781960

SWSSTP10 47782060

SWSSTP15 47782160

SWEXK 87783160

SWSS TP Pressure Reducing Valve SWPRK 87783161

www.redring.co.uk

81

Cylinder Parts

Dimensions

A

Dimensions (mm)

SWSS7 SWSS10 SWSS15

A 291 291 291

B 338

C 364

D 286

394

420

286

484

510

286

D

Technical

Specification

Heat up time 15°C to 65°C (minutes) - 7L/9, 10L/12 and 15L/18 I

Weight when full (kg) - 7L/13.5, 10L/17.2 and 15L/23.3 I Cold feed/hot draw-off connections - 15mm I Minimum recommended mains pressure (performance reduces at lower pressure) - 1.5bar I Maximum working pressure - 6bar I Maximum water supply pressure - 16bar I

Expansion relief valve set pressure - 6bar I Electrical supply - 230V

50Hz direct connection to 13A fused isolation switch with 3mm min gap I Recommendations are based on BS6700 - Actual water usage varies dramatically per application, the figures given are a guide only.

Where water saving devices are used the number of water outlets can be increased.

Installation Kits

See page 84 to determine what installation kit is required with your

SWSS heater. The installation will not comply with the Water

Regulations if the correct kits are not fitted.

82 Technical 0844 372 7766 Sales 0844 372 7750

Aqualoy SWSS

7-15 litre Stainless Steel Unvented Water

Storage Heaters

Water heating cylinders that provide thermostatically controlled, mains pressure, hot water up to 68°C. The Aqualoy SWSS cylinders’ smaller size allows them to be easily mounted under sinks or any convenient place near to the point of use.

Application

Key Features

Hot water storage.

High levels of insulation minimise heat loss I

Thermostatic temperature control provides water temperature to 15-68°C I Wall-mounted I Stainless steel cylinder with 10 year warranty I No anode to service I High water flow rates I Direct connection to cold mains water supply I Ideal for low volume frequent or irregular use applications I Incoloy elements.

Safety Features

Thermal cut-out - manual reset.

Capacities

Rating

Outer Casing

Insulation

7, 10 and 15 litre.

3kW @ 230V.

Steel, wipe clean, white plastic coated finish and corrosion resistant base and lid.

Injected foam - depth 30mm.

Water Container

316L stainless steel cylinder.

Heat Unit

Thermostat

Incoloy elements.

Thermostatic temperature control - 15°C-68°C.

Anode

Pressure

No anode to replace.

Maximum water supply pressure - 16bar.

Approvals

Guarantee

Kiwa Approved Product I CE I BEAB Approved.

10 year cylinder and 2 year parts guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Aqualoy SWSS 7 litre

Aqualoy SWSS 10 litre

Aqualoy SWSS 15 litre

SWSS Expansion Kit

SWSS7

SWSS10 47784561

SWSS15

SWEXK

SWSS Pressure Reducing Valve SWPRK

47784562

47784560

87783160

87783161

www.redring.co.uk

83

Aqualoy SWSS & SWSS TP

Installation Kit Guide

Installation kits should be fitted to all SWSS/SWSS TP units of 15 litres or less and in accordance with the details below.

The installation will not comply with the Water Regulations if the correct kits are not fitted.

Is there a cold water take-off within: 2m for 7 litre unit, 2.8m for 10l unit, 4.2m for 15l unit?

No

Is there a non-return valve or non-return function eg. water meter, preventing reverse flow of cold water, in the cold water supply?

Yes

No Yes

Is the cold mains water supply pressure less than 4bar?

Is the cold mains water supply pressure less than 4bar?

Yes No Yes No

Not necessary to fit additional kits?

Fit pressure reducing kit

SWPRK

Fit expansion kit

SWEXK

Fit kits SWPRK

& SWEXK

Technical

Expansion back to the mains

Ordinary kitchen tap

6bar expansion relief valve

Nearest cold take off

Minimum distance:

7 litre 2.0m

10 litre 2.8m

15 litre 4.2m

Mains water supply <4bar

Expansion Kit (SWEXK)

Ordinary kitchen tap

6bar expansion relief valve

Expansion vessel

Check valve

Nearest cold take off

No cold water take-off before check valve

Mains water supply <4bar

Pressure Reducing Kit (SWPRK)

Ordinary kitchen tap

6bar expansion relief valve

Expansion vessel

Check valve

Nearest cold take off

3bar

Minimum distance:

7 litre 2.0m

10 litre 2.8m

15 litre 4.2m

Pressure reducing valve

Mains water supply <4bar

84 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

85

Dimensions

360mm

MW10 / MW10H 254mm

MW15 / MW15H 300mm

Accessories Optional Cold Water Pack

: A: Expansion vessel (Dia 120mm x

H 235mm), B: Pressure reducing valve, C: Check valve I Additional

Accessories

: D: Tundish (supplied as standard with MW) E:

Thermostatic blending valve.

A B C D E

NB

: Use with water supply pressures above 6bar or where cold water supply pipe is not long enough to accommodate expansion of hot water, i.e MW15 - Less than 4.5m of 15mm pipe, (MW10 - Less than 3m)

Technical

Operating water pressure 1 - 12bar (above 6bar use cold water pack) I

Replaceable magnesium sacrificial anode I Anode available as spare part I Inlet/outlet connections 15mm (½” BSP) I Fixing pack with wall mounting bracket supplied I MW unit needs to discharge to a drain.

Heater

variant

MW10

MW15

MW10H

MW15H

Capacity kW loading Cable size Fuse rating

(litres)

10

15

10

15

@ 230-240V guide

2.7 - 3

2.7 - 3

2.7 - 3

2.7 - 3

1.5mm

2

1.5mm

2

1.5mm

2

1.5mm

2

guide

13 Amps

13 Amps

13 Amps

13 Amps

86 Technical 0844 372 7766 Sales 0844 372 7750

MW

10-15L Unvented Water Storage Heaters

The MW range has been designed to provide stored hot water from a mains pressurised water supply. MW TP comes complete with a factory fitted temperature and pressure relief device.

Application

Hot water storage.

Key Features

Hot water to up to 4 outlets I Balanced supply of hot and cold water I Minimal heat loss and energy savings - short pipe runs and superior insulation I

Water outlet via existing tap or mixer I Adjustable thermostat to 70°C I Compact for undersink mounting I Remote siting possible.

Safety Features

Over-temperature safety cut-out I Temperature pressure relief valve I Neon light indicates when heater is working.

Capacities

10 and 15 litre.

Rating

3kW @ 240V (2.7kW @ 230V).

Outer Casing

White thermoplastic cover.

Insulation

Foamed polyurethane insulation.

Accessories

See opposite page for details.

Water Container

Vitreous enamelled steel water container.

Heat Unit

Thermostat

Long-life Incoloy elements.

Adjustable thermostat to 70°C.

Anode

Pressure

Approvals

Guarantee

Replaceable magnesium sacrificial anode.

1 - 12bar (above 6bar use cold water controls pack).

WRAS Approved Product I BEAB Approved I CE.

1 year product guarantee (UK).

Product Range

Product Reference Short Code

MW10 Undersink

MW15 Undersink

MW10H Oversink

MW15H Oversink

Optional Cold Water Pack

Temp. & Pressure Relief Valve

Thermostatic Blending Valve

MW10

MW15

MW10H

MW15H

Cat. No

47782001

47782101

47781001

47781101

87783101

97783258

87783103

www.redring.co.uk

87

Dimensions

360mm

EW10 254mm

EW15 300mm

Accessories Optional Cold Water Pack

: A: Expansion vessel (Dia 120mm x H 235mm),

B: Pressure reducing valve, C: Check valve I Additional Accessories:

D: Tundish, E: Thermostatic blending valve.

A B C D E

NB

: Use with water supply pressures above 6bar or where cold water supply pipe is not long enough to accommodate expansion of hot water, i.e EW15 - Less than 4.5m of 15mm pipe, (EW10 - Less than 3m)

Technical

Operating water pressure 1 - 12bar (above 6bar use cold water pack) I

Replaceable magnesium sacrificial anode I Anode available as spare part I

Inlet/outlet connections 15mm (½” BSP) I Fixing pack with wall mounting bracket supplied I EW unit needs to discharge to a drain.

Heater

variant

EW10

EW15

Capacity kW loading Cable size Fuse rating

(litres) @ 230-240V guide guide

10

15

2.7 - 3

2.7 - 3

1.5mm

2

1.5mm

2

13 Amps

13 Amps

88 Technical 0844 372 7766 Sales 0844 372 7750

EW

10-15L Unvented Water Storage Heaters

The EW has been designed to provide stored hot water from a mains pressurised water supply, where there’s no requirement for a temperature/pressure relief device, making installation simple.

Application

Hot water storage.

Key Features

Hot water to up to four outlets I Balanced supply of hot and cold water I Heat loss minimisation and energy savings from short pipe runs and superior insulation I Water outlet via existing tap or mixer I

Adjustable thermostat to 70°C I Compact shape for undersink mounting I Remote siting possible.

Safety Features

Over-temperature safety cut-out I 6bar expansion relief valve I On/off neon light.

Capacities

Rating

10 and 15 litre.

3kW @ 240V (2.7kW @ 230V).

Outer Casing

Insulation

Accessories

White thermoplastic cover.

Foamed polyurethane insulation.

See opposite page for details.

Water Container

Vitreous enamelled steel water container.

Heat Unit

Long-life Incoloy alloy sheathed elements.

Thermostat

Anode

Adjustable thermostat to 70°C.

Replaceable magnesium sacrificial anode.

Pressure

Approvals

Guarantee

1 - 12bar (above 6bar use cold water controls pack).

BEAB Approved I WRAS Approved Product I CE.

1 year product guarantee (UK).

Product Range

Product Reference Short Code

EW10 Undersink

EW15 Undersink

Optional Cold Water Pack

EW10

EW15

Tundish

Temp. & Pressure Relief Valve

Thermostatic Blending Valve

Cat. No

47784501

47784502

87783101

97783236

97783258

87783103

www.redring.co.uk

89

Aqualoy

Copper (popular)

Aqualoy Copper

Dimensions

11 inches (Min) 36 inches (Max)

Technical

Specification

Redring Dual

Thermostats

Aqualoy - for use in aggressive water areas I Copper (Popular) - for use in soft and normal water areas.

For use with non-dual cut out immersion heaters.

Product Reference

7 inch DC rod stat 13A

11 inch DC rod stat horizontal 13A

18 inch DC rod stat 13 - 16A

11 inch DC rod stat vertical 13A

Catalogue No.

92301573

92301574

92301575

92301580

90 Technical 0844 372 7766 Sales 0844 372 7750

Domestic Immersion Heaters

Aqualoy and Copper Water

Immersion Heaters

Redring offer a range of dual cut-out immersion heaters to comply with the latest European safety standard, EN 60335-2-

73 for fixed immersion heaters. Redring dual cut-out immersion heaters are supplied with a rod thermostat and a separate,

‘secondary manual reset safety cut-out’. Dual cut-out immersion heaters are available in standard Copper or Aqualoy variants for use in more aggressive water areas.

Application

Hot water heating.

Key Features

Comply with European safety standard, EN 60335-2-73 I

Available in Aqualoy - for more aggressive water areas I

Copper - for use in soft and normal water areas I Dual cut-out heaters supplied complete with rod thermostat

Safety Features

Dual cut-out I Separate, ‘secondary manual reset safety cut-out’, fitted directly to the immersion heater head.

Rating

3kW @ 240V.

Length

Sheath

Thermostat

Approvals

Guarantee

11, 14, 27, 30 and 36 inches.

Copper and Aqualoy.

All dual cut-out heaters come with rod thermostats supplied.

WRAS Approved Product I BEAB Approved I CE.

Aqualoy - 3 year I Copper - 1 year guarantee (UK).

Product Range

Product Reference Short Code Cat. No Length

2¼” BSP Copper

2¼” BSP Copper

2¼” BSP Copper

P11DC

P14DC

P27DC

33324501 11”

33324502 14”

33324503 27”

2¼” BSP Copper

2¼” BSP Copper

2¼” BSP Aqualoy

P30DC

P36DC

A11DC

33324504 30”

33324505 36”

33324601 11”

2¼” BSP Aqualoy A27DC 33324602 27”

1¾” BSP Unvented Aqualoy GU11DC 33324701 11”

www.redring.co.uk

91

Min.

Max.

Dimensions

11 inches (Min) 36 inches (Max)

Technical

Specification

Industrial heaters - Incoloy 825 sheathed elements 2¼” BSP threaded brass heads I Control thermostat in Incoloy 825 pocket I Corrosion resistant polypropylene terminal.

92 Technical 0844 372 7766 Sales 0844 372 7750

Industrial Immersion Heaters

Incoloy 825 Industrial Water

Immersion Heaters

Redring have a comprehensive range of industrial immersion heaters, using Incoloy sheathed heating elements and adjustable rod thermostats.

Application

Hot water heating.

Key Features

Loadings available from 2 - 18kW I Wired in single phase or 3 phase I Control thermostat in Incoloy 825 pocket I Incoloy 825 Industrial heaters with angular rotary terminal enclosure - can be moved to any position

I Immersed lengths from 11 - 36 inches.

Safety Features

Dual cut-out I Separate, ‘secondary manual reset safety cut-out’, fitted directly to the immersion heater head.

Rating

Length

2, 3, 4, 6, 7.5, 9, 12 and 18kW @ 240V.

11, 14, 16, 24, 27, 30 and 36 inches.

Sheath

Thermostat

Approvals

Guarantee

Incoloy.

All dual cut-out heaters come with rod thermostats supplied.

WRAS Approved Product I CE.

1 year product guarantee (UK).

Product Range

Catalogue Short

Number Code

60391301 RY211

60391302 RY311

Loading kW

2

3

60391303 RY330 3

60391304 RY411 4

Phases

1 only

1 or 3

1 or 3

1 or 3

Immersed

Length

11

11

30

11

60391305 RY416 4

60391306 RY616 6

60391307 RY630 6

60391309 RY724 7.5

60391310 RY914* 9

1 or 3

1 or 3

1 or 3

1 or 3

1 or 3

16

16

30

24

14

60391311 RY927 9

60391312 RY936 9

60391313 RY1224 12

60391314 RY1236 12

60391315 RY1836 18

* Not recommended for aggressive water.

1 or 3

1 or 3

1 or 3

1 or 3

1 or 3

27

36

24

36

36

www.redring.co.uk

93

Dimensions

167mm 63mm

Technical

Specification

230V - 240V, 13A I Suitable for immersion heaters up to 3kW I

Display: 6.35mm character height, backlit liquid crystal display, am/pm indication, Summer/Winter indication.

Product Dirt

Variant

Moisture Shock Max. Op Min. Op

Protection Protection Protection Temp °C Temp °C

EC7 Normal Ordinary Class 1 +35 0

94 Technical 0844 372 7766 Sales 0844 372 7750

Immersion Heater Controller

Economy 7 Time Controller

The Redring Electronic 7 immersion heater controller allows up to three secure off-peak heating periods every 24 hours to make the maximum use of cheap rate structures - including split tariffs.

Application

Hot water storage control.

Key Features

One minute accuracy means no accidental running over into full rate tariff periods I Suitable for use with single,dual or two element immersion heaters I

Precise and flexible programming - Off peak - up to

3 on/off periods I Pre-programmable automatic boost and one hour manual boost I Illuminated display for easy reading even in a dark cupboard I One touch

Winter/Summer change button alters setting and display I 2 year battery reserve protection against powerinterruption I Easy installation I Microgap on control.

Safety Features

Full disconnection to immersion heater(s) on double

pole isolator switch.

230V - 240V, 13A.

Rating

Outer Casing

Approvals

Thermoplastic, flame retardant.

WRAS Approved Product I BEAB Approved I CE.

Guarantee

1 year product guarantee (UK).

Product Range

Product

Ref.

Short Catalogue Supply

Code Number

Power

Electronic 7 EC7 82700206 240V AC, 50Hz 10VA max

Live

Consumption Parts

Yes

www.redring.co.uk

95

Dimensions

B C

Technical

Specification

Product

variant

CT25

CT50

CT75

CT100

½” BSP cold water and 22mm compression fitting hot water connections.

Dimensions (mm)

A Height B Width

705

750

470

600

925

1080

600

600 320

C Depth

210

320

320

96 Technical 0844 372 7766 Sales 0844 372 7750

Flatback Cistern

25-100 litre Vented Water Storage Heaters

Designed for wall-mounted installation and ideal for small commercial kitchens, bathrooms, cloakrooms and canteens, these Flatback Cisterns are compact and provide a multi-outlet water heating solution.

Application

Hot water storage.

Key Features

Choice of 25, 50, 75 or 100 litre capacities I 2 adjustable thermostats for precise control I Ideal for replacement (overflow and cold feed can be connected on the left or right hand side) I 50 to 80°C thermostatic control range I Drain connection supplied and fitted I

Cold water cistern incorporated within the unit.

Safety Features

Overheat protection.

Capacities

Rating

25, 50, 75 and 100 litre heaters.

3kW.

Outer Casing

Corrosion proofed steel, with enamel finish outer casing.

Insulation

High density foam.

Water Container

Copper sheet water vessel with brazed seams.

Heat Unit

Thermostat

Long-life Incoloy sheathed elements.

Fixed 50-80°C thermostatic control range.

Pressure

Approvals

Operating pressure 0.7bar to 10bar.

BEAB Approved I WRAS Approved Product I CE.

Guarantee

2 year product guarantee (UK).

Product Range

Product Reference

Cistern Type 25

Cistern Type 50

Cistern Type 75

Cistern Type 100

Short Code

CT25

CT50

CT75

CT100

Cat. No

26786401

26786801

26786901

26787001

www.redring.co.uk

97

Min.

Max.

Dimensions and Application

Contour 7000 Remote Only

286mm 165

385mm 265mm

Accessories A

: Extended Swivel Spouts 450mm, B: 600mm, C: Monoblock Vented

Chrome Mixer.

A C

B

Technical

Specification

½” BSP cold water and 22mm compression fitting hot water connections I Restrictors supplied to optimise flow rate I NB: We only recommend the use of the of the Redring Vented Monoblock Mixer.

98 Technical 0844 372 7766 Sales 0844 372 7750

Contour 7000

7L Slimline Vented Water Storage Heaters

This storage heater has a 7 litre capacity and is ideal for oversink washing. Alternatively, the Contour 7000 Remote allows you to fit under the sink. Featuring an air operated sink mounted switch that, when pressed, delivers hot water through a remote swivel spout at your pre-set temperature.

Application

Hot water storage.

Key Features

7 litre capacity, point of use I Adjustable thermostat

15°C - 75°C I Choice of heat settings I Ideal handwash and dishwash temperature settings indicated on the unit I Complete with 300mm swivel spout I Negligible standing heat loss I Contour 7000

Remote Only - On/off control via touch air switch I Hot water delivered through a remote swivel spout I

Remote air switch swivel spout and flexible hose supplied I Neat and out of sight installation.

Safety Features

Integral on/off and flow control I Frost protection setting I Tamperproof thermostat cover I Safety over temperature fuse.

Capacities

7 litre.

Rating

Outer Casing

1kW and 3kW.

High quality impact resistant ABS cover.

Insulation

Polystyrene insulation.

Water Container

Corrosion resistant polypropylene.

Heat Unit

Sheathed heating elements.

Thermostat

Pressure

Capillary type, externally adjustable - 15°C - 75°C with frost protection setting.

0.7bar - 10bar (Flow restrictors included).

Accessories

Approvals

Guarantee

See opposite page for details.

BEAB Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Contour 7000 3kW

Contour 7000 1kW

C73

C71

Contour 7000 Remote C7U3

Extended Swivel Spouts 450mm S1

Extended Swivel Spouts 600mm S2

Mono Vented Chrome Mixer MCM

44784001

44784002

44784020

84780404

84780405

84780408

www.redring.co.uk

99

Dimensions and Application

295mm 285mm

300mm

Technical

Specification

Electrical - Temperature control, isolation valve I Elements - 2.2kW

@ 230V 50Hz I Electrical Connections - 1m 3-core supply cable provided I NB: Open Outlet Device - Outlet must be left open to the atmosphere and should not be modified or restricted in any way.

WS10

10 litre Vented Water Storage Heater

The WS10 provides stored hot water at point of use. It can deliver up to 10 litres of hot water and the open outlet or non-pressurized unit benefits from minimal standing heat loss, because it is installed at point of use.

Application

Hot water storage.

Key Features

10 litre capacity, point of use I 4 temperature settings - cold, 38°C, 60°C and 70°C I Complete with

300mm swivel spout I Negligible standing heat loss I

Power on indicator.

Safety Features

Auto reset temperature cut-out, allows unit to resume operation in the event of being operated when dry.

Capacities

Rating

10 litre.

2.2kW @ 230V 50Hz.

Outer Casing

White I Easy Clean I Thermoplastic.

Insulation

Polystyrene insulation.

Water Container

Corrosion resistant polypropylene.

Heat Unit

Sheathed heating elements.

Thermostat

Pressure

Capillary type, externally adjustable - 15°C - 70°C with frost protection setting.

Operating pressure - 0.7bar to 10bar.

Approvals

Guarantee

CE.

3 year product guarantee (UK).

Product Range

Product Reference

WS10

Short Code

WS1022

Cat. No

44780065

100 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

101

Programmable timer

Dimensions

278mm 232

Accessories A:

Extended Swivel Spouts 450mm, B: 600mm, C: Monoblock Vented

Chrome Mixer.

A C

B

Technical

Specification

Cold water 15mm compression I Outlet ½ BSP - swivel spout connection supplied I Restrictors supplied to optimise flow rate I NB:

We only recommend the use of the of the Redring Vented

Monoblock Mixer.

102 Technical 0844 372 7766 Sales 0844 372 7750

WS7-EcoT

7 litre Vented Water Storage Heaters with 24 hour, 7 day programmable timer

Building on our best selling WS7 water heater, the EcoT model contains an integral timer that offers the ability to program multiple on-off times throughout the week. This makes it perfect for installations where people are not using the water heater all of the time, as the heater can be programmed to come on only when people need it.

Application

Hot water storage.

Key Features

24 hour, 7 day programmable timer I 7 litre capacity, point of use I 3kW rating I 300mm swivel spout included I Extended outlets available I Wall bracket and full fixing pack supplied I Adjustable thermostat

15°C - 75°C with frost protection setting.

Safety Features

Frost protection setting I Integral safety over-

Capacities

temperature thermal fuse I Optional tamper proof cover supplied.

7 litre.

Rating

Outer Casing

3kW.

High quality impact resistant ABS cover.

Insulation

Polystyrene insulation.

Water Container

Corrosion resistant polypropylene.

Heat Unit

Sheathed heating elements.

Thermostat

Capillary type, externally adjustable - 15°C - 75°C with frost protection setting.

Pressure

Accessories

Approvals

Guarantee

0.7bar - 10bar (Flow restrictors included).

See opposite page for details.

BEAB Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code Cat. No

WS7 3kW EcoT WS7-EcoT 44780005

Extended Swivel Spouts 450mm S1

Extended Swivel Spouts 600mm S2

Mono Vented Chrome Mixer MCM

84780404

84780405

84780408

www.redring.co.uk

103

Min.

Max.

Dimensions

278mm 232

Accessories A:

Extended Swivel Spouts 450mm, B: 600mm, C: Monoblock Vented

Chrome Mixer.

A C

B

Technical

Specification

Cold water 15mm compression I Outlet ½ BSP - swivel spout connection supplied I Restrictors supplied to optimise flow rate I NB: We only recommend the use of the of the Redring Vented Monoblock Mixer.

104 Technical 0844 372 7766 Sales 0844 372 7750

WS7

7 litre Vented Water Storage Heaters

The WS7 offers an economical solution to provide stored hot water at point of use and can be mounted undersink using the special monoblock chrome-mixer accessory. These units also benefit from minimal standing heat loss, because they are installed at point of use.

Application

Hot water storage.

Key Features

7 litre capacity, point of use I Choice of 1kW and 3kW models I 300mm swivel spout included I Extended outlets available I Wall bracket and full fixing pack supplied I Adjustable thermostat 15°C - 75°C with frost protection setting.

Safety Features

Frost protection setting I Integral safety over - temperature thermal fuse I Optional tamper proof cover supplied.

Capacities

7 litre.

Rating

1kW and 3kW.

Outer Casing

High quality impact resistant ABS cover.

Insulation

Polystyrene insulation.

Water Container

Corrosion resistant polypropylene.

Heat Unit

Sheathed heating elements.

Thermostat

Capillary type, externally adjustable - 15°C - 75°C with frost protection setting.

Pressure

Accessories

Approvals

Guarantee

0.7bar - 10bar (Flow restrictors included).

See opposite page for details.

BEAB Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code Cat. No

WS7 3kW

WS7 1kW

WS73

WS71

Extended Swivel Spouts 450mm S1

Extended Swivel Spouts 600mm S2

Mono Vented Chrome Mixer MCM

44780001

44780002

84780404

84780405

84780408

www.redring.co.uk

105

Dimensions and Application

258mm 228mm

300mm

Technical

Specification

Electrical - Temperature control, isolation valve I Elements - 2.2kW

@ 230V 50Hz I Electrical Connections - 1m 3-core supply cable provided I NB: Open Outlet Device - Outlet must be left open to the atmosphere and should not be modified or restricted in any way.

WS5

5 litre Vented Water Storage Heater

The WS5 water heater offers a very economical solution for stored hot water at point of use. It can deliver up to

5 litres of hot water and the open outlet, or non-pressurized unit, benefits from minimal standing heat loss, because it is installed at point of use.

Application

Hot water storage.

Key Features

5 litre capacity, point of use I 4 temperature settings

- cold, 38°C, 60°C and 70°C I Complete with 300mm swivel spout I Negligible standing heat loss I Power on indicator.

Safety Features

Auto reset temperature cut-out, allows unit to resume operation in the event of being operated when dry.

Capacities

5 litre.

Rating

Outer Casing

Insulation

2.2kW @ 230V 50Hz.

White I Easy Clean I Thermoplastic.

Polystyrene insulation.

Water Container

Corrosion resistant polypropylene.

Heat Unit

Sheathed heating elements.

Thermostat

Pressure

Approvals

Guarantee

Capillary type, externally adjustable - 15°C - 70°C with frost protection setting.

Operating pressure - 0.7bar to 10bar.

CE.

3 year product guarantee (UK).

Product Range

Product Reference

WS5

Short Code

WS522

Cat. No

44780060

106 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

107

LT1 Basin Tap

Min.

Max.

Dimensions and Application

307mm 74mm

Technical

Specification

Flow/service valve I Thermal cut-out protection I Unique

Redring water flow operated power switch I Corrosion resistant steel backplate I Half power selection available on installation.

Heater Operating kW loading Cable size Fuse rating

variant

RP1

RP10.8

RP12

pressure @ 230-240V guide

15 - 150psi 8.7 - 9.5 6 / 10mm 2

guide

40 Amps

20 - 150psi

25 - 150psi

9.9 - 10.8

11 - 12

10 / 16mm

2

45 Amps

10 / 16mm 2 50 Amps

Heater Flow rate performance (Winter / Summer)

variant 4 litres / min 5 litres / min 6 litres / min

RP1 39 / 54°C

RP10.8 44 / 58°C

RP12 48 / 63°C

32 / 47°C

36 / 51°C

39 / 54°C

28 / 42°C

31 / 46°C

34 / 49°C

108 Technical 0844 372 7766 Sales 0844 372 7750

Powerstream

Unvented Instantaneous Water Heaters

Powerstream delivers instant hot water at point of use. This compact and unique design eliminates the need for centrally stored hot water cylinders saving on electricity usage and important space.

Application

Instantaneous water heating.

Key Features

12kW unit is the highest rated single phase heater on the UK market I Water supplied to one or two outlets

(either one shower and one hand basin or two hand basins) I Water outlet via spray tap accessories I

Direct mains supply I Small compact shape I Remote fitting option I No standing heat losses Fast response

I Half power selection available on installation I

Corrosion resistant steel backplate.

Safety Features

Thermal cut-out protection I Water flow operated power switch.

Rating

Element

9.5, 10.8 and 12kW @ 240V.

Sheathed heating elements.

Outer Casing

Impact resistant thermoplastic cover .

Pressure

Rated pressure - 1bar to 10bar.

Accessories

Approvals

¼ turn lever control spray tap I NB: We only recommend the use of the Redring ¼ Turn Spray Tap.

BEAB Approved I CE.

Guarantee

3 year product guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Powerstream 9.5

Powerstream 10.8

Powerstream 12

RP1

RP10.8

RP12

Shower Mixer Kit RM1

¼ Turn Lever Control Spray Taps* LT1

(* supplied as pair)

45793201

45793204

45793202

85793620

85793616

www.redring.co.uk

109

Min.

Max.

Storage Tank Components

Dimensions

236mm 142mm

G ½ A

100mm 151mm

Technical

Specification

Electrical supply: 380-415V 3 phase I The unit must be connected to an all-pole isolation switch with a minimum gap of 3mm I Water supply and fittings - supplied from cold mains water supply only - max 20°C I

Standard UK water fittings may be connected to the outlet providing they exceed the minimum flow rates I Specific electrical resistance at

15°C ≥1300 Ωcm I See page 112 for further technical details.

110 Technical 0844 372 7766 Sales 0844 372 7750

Powerstream 3 Phase Plus

Eco 3-phase Unvented Water Heaters

With economy settings the Powerstream 3 Phase Plus instantaneous water heater is ideal for supplying high volumes of water where a 3-phase 415V supply is available.

Application

Instantaneous water heating.

Key Features

Unit is economical to run, providing flow rates of

6.8-13 litres/min I Two heat settings 38°C or 50°C

(at supply temperatures of 12°C) I Rated pressure

10bar allows unit to be connected directly to the cold mains water supply and can be controlled by a normal

UK tap fitting I Unique Clickfix

®

allows the unit to be installed within minutes I Scale resistant design open wound wire elements I Variable depth mounting screws for mounting onto uneven surfaces.

Safety Features

Flow activated switch I Over-temperature safety cut-out.

Rating

Element

18kW, 21kW and 24kW (415V 3-Phase).

Open wound wire elements.

Outer Casing

Special

Accessories

Pressure

Approvals

Guarantee

White impact resistant plastic.

P3P 02RBS Pipe set: When using the instantaneous water heater as a built-under appliance I Priority switch (load reducing relay): For operation with the priority circuit I P3P 02AP Mounting set: For surface- mount installation.

Rated pressure - 10bar.

CE.

3 year guarantee on storage tank and 1 year on components (UK).

Product Range

Product Reference Short Code Cat. No

Powerstream 3 Phase Plus 18kW P3PPE1803 45552865

Powerstream 3 Phase Plus 21kW P3PPE2102 45552866

Powerstream 3 Phase Plus 24kW P3PPE2402 45552867

Powerstream 3 Phase Pipe Set P3P 02RBS 87783163

Powerstream 3 Phase Mounting Set P3P 02AP 87783164

www.redring.co.uk

111

Powerstream 3 Phase Plus

Technical Specification

Powerstream 3 Phase Plus models

P3PPE1802 P3PPE2102 P3PPE2404

Rated power

Rated voltage

18kW

400V - 3 phase

Economy setting I

1st stage

2nd stage

High setting II

1st stage

2nd stage

Switch-on flow point

1st stage

2nd stage

Mixed water at rated power

(supply temp. 12°C)

Approx. 38°C

Approx. 50°C

Minimum flow pressure of appliance

6kW

12kW

9kW

18kW

4.0 l/min

5.0 l/min

9.9 l/min

6.8 l/min

21kW

400V - 3 phase

7kW

14kW

10.5kW

21kW

4.5 l/min

5.8 l/min

24kW

400V - 3 phase

8kW

16kW

12kW

24kW

5.0 l/min

6.6 l/min

11.6 l/min

7.9 l/min

13.2 l/min

9.1 l/min

With flow limiter

Without flow limiter

Operative range in waters of specific electric resistance at 15°C

Rated pressure

0.07 MPa

(0.7bar)

0.04 MPa

(0.4bar)

≥1300 Ωcm

Maximum permissible supply temperature

1 MPa

(10bar)

20°C

0.08 MPa

(0.8bar)

0.05 MPa

(0.5bar)

≥1300 Ωcm

0.09 MPa

(0.9bar)

0.06 MPa

(0.6bar)

≥1300 Ωcm

1 MPa

(10bar)

20°C

1 MPa

(10bar)

20°C

112 Technical 0844 372 7766 Sales 0844 372 7750

Water Boiling Units

Range Profile in Detail

Beverage Water Boilers

SB Professional

2.5-25 litre Stainless Steel

Beverage Water Boilers

Page 114

SB

2

2.5-4 litre Beverage Water Boilers

Page 116

Corvette

1-3.8 litre Wall Kettle

Page 118

www.redring.co.uk

113

Dimensions

B

D

C

Water boiler variant

SB Pro. 2.5l

SB Pro. 5l, 7.5l

SB Pro. 10l, 15l

SB Pro. 20l, 25l

Dimensions (mm)

A B C D E

430 315 210 125 185

510 370 250 170 185

565 425 320 240 185

630 490 350 270 185

Technical

Specification

Product Range

Connects to 13 Amp (220-240V) doublepole fused isolating switch I

Electrical connection via 1 metre cable supplied to fused spur I Water entry bottom/rear via standard I 15mm compression fitting I Install over sink, draining board, or drip tray.

Product

Reference

Catalogue Initial Draw Off Recovery

Number (170ml) (litres) Rate (cups/hr)

SB Professional 2.5l 22713801 15

SB Professional 5l 22715801 30

SB Professional 7.5l 22716801 45

2.5

5.0

7.5

125

125

125

SB Professional 10l 22717801 60 10.0 125

SB Professional 15l 22718801 100 15.0 125

SB Professional 20l 22719301 120 20.0 125

SB Professional 25l 22719701 150 25.0 125

114 Technical 0844 372 7766 Sales 0844 372 7750

SB Professional

Stainless Steel Beverage Water Boilers

Wall-mounted, self-calibrating and self-filling this is a water heater for Industrial and Commercial applications. Used for making cups of tea, coffee, soup and hot snacks it offers 7 capacity sizes. The 2.5 litre model is ideal for small offices and the 25 litre model for a busy canteen, dispensing up to 150 cups on demand and a delivery of 250 cups per hour.

Application

Beverage water boiler.

Key Features

7 capacity options I Stainless steel water tank with fully insulated jacket to minimise heat loss I Robust corrosion resistant construction I Provides for concealed plumbing and electrical connection.

Safety Features

Neon ‘power on’ light I Condensation chamber for steam-free operation I Manual reset thermostat for detecting excessive steam in the event of water solenoid valve failure I Water temperature is automatically maintained I Unit is fitted with manual reset safety device to avoid boiling dry.

Capacities

2.5, 5, 7.5, 10, 15, 20 and 25 litre.

Rating

2.4kW / 13 Amp (220-240V).

Outer Casing

Brushed stainless steel cover, wipes clean.

Insulation

Energy efficient aluminium backed insulation.

Water Container

Stainless steel.

Heat Unit

Incoloy sheathed elements.

Thermostat

Pressure

Approvals

Guarantee

Manual reset thermostat.

Operating pressure - 2bar to 10bar.

BEAB Approved I CE.

2 year product guarantee (UK).

Storage 1st hr Delivery Element Approx.

Capacity (l) (cups) (kW) Weight

2.5

5.0

7.5

10.0

15.0

20.0

25.0

125

135

150

175

200

225

250

2.4

2.4

2.4

2.4

2.4

2.4

2.4

6kg

7kg

8kg

9kg

10kg

12kg

13kg

App. Laden

Weight

8.5kg

12kg

15.5kg

19kg

25kg

32kg

38kg

www.redring.co.uk

115

Dimensions

285mm 220mm

Technical

Specification

Electrical connection from suitable ring circuit via a switched/fused outlet with 1 metre cable supplied I Wall-mounted with rear or bottom plumbing connection via a standard 15mm compression fitting to the cold water mains I Incorporates an overflow/vent connection that discharges to a suitable drain I Supplied with a hook-on wall bracket together with a 3-point screw fixing.

116 Technical 0844 372 7766 Sales 0844 372 7750

SB

2

2.5 & 4 litre Beverage Water Boilers

Developed to deliver up to 154 cups of hot water every hour, this unique design provides drinks and beverages instantly without the need for kettles and minimising waiting times.

Integral sensors give auto-fill/top-up and temperature control.

Application

Beverage water boiling.

Key Features

Auto-fill and heat I Push button for on/standby I

Quarter turn tap to dispense water I Stainless steel sheathed heat elements for long-life I CFC-free insulation - minimises temperature and energy loss on/standby function for energy saving I Scale trap to enhance quality of beverage.

Safety Features

Three LEDs indicate power on, unit full and temperature ready I Microprocessor controlled for water level and accurate temperature control I Thermostatically controlled to automatically set to boiling point when the unit is first switched on I Cool to the touch I Auto re-set over-temperature cut-out.

Capacities

Rating

2.5 and 4 litre.

2.2kW @ 240V.

Outer Casing

High impact, durable thermoplastic.

Insulation

CFC-free insulation.

Water Container

High impact, thermoplastic.

Heat Unit

Stainless steel elements.

Thermostat

Pressure

Approvals

Guarantee

Electronic thermostat I

Auto re-set over-temperature cut-out.

Supply pressure - min. 0.5bar (7psi), max. 10bar (145psi)

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference

SB2 2.5 litre

SB2 4 litre

Short Code

RSB 2.5

RSB 4

Cat. No

22714401

22714601

www.redring.co.uk

117

Dimensions

206mm 189mm

174mm

Accessories

Plumbing-in kit to connect the Corvette directly to the cold water mains (as pictured) I Extended length filler hose 1.7m I Extended length outlet spout

330mm I Tap adaptor kit to connect the filler hose to non-standard taps.

Corvette

1-3.8 litre Wall Kettle

The Corvette delivers boiling water for drinks and washing up needs, from a permanently wired installation.

Application

Key Features

Beverage water boiling.

Quick and easy installation I Can boil from 1 litre to a maximum of 3.8 litres I Easy to read water level indicator I Detachable hose supplied for temporary

installation I Economical to use I High quality stainless steel sheathed element I Stainless steel

base plate.

Safety Features

Auto switch off at boiling point I Rapid reset I Neon glows when water is being heated I Extended spout for extra safe pouring I Safety auto steam switch I

2-stage boil dry element protection.

Capacities

1 to 3.8 litres.

Rating

Outer Casing

2.2kW @ 240V.

High impact, durable thermoplastic.

Water Container

High impact, thermoplastic.

Heat Unit

Thermostat

High quality stainless steel sheathed element.

Steam switch I Auto re-set over-temperature cut-out.

Pressure

Accessories

Approvals

Guarantee

Mains pressure supply.

See opposite page for details.

CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code

Corvette CV1

Plumbing-in Kit

Extended Length Outlet Spout

Cat. No

28717201

89716201

89716203

Technical

Specification

Plumbing-in kit required for permanent supply I Electrical connection via a fused spur I Water entry via filler hose supplied, optional plumbing kit, or manually I Unit can be positioned over a sink or suitable outlet I Supplied

1m cable, cable tidy, wall mounting plate, wall fixing kit, 1m filler hose.

118 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

119

120 Technical 0844 372 7766 Sales 0844 372 7750

Washrooms

Range Profile in Detail

Instantaneous Hand Washing

Autosensor Touch-free Vortex Spray

Hand Wash Unit

Page 124

Instant 3 & 7 Vortex Spray Hand Wash Units

Page 126

Automatic Hand Dryers

Turbo-Airflo

Page 128

AD1 Autodry

High Velocity Automatic Hand Dryer

Compact Automatic Hand Dryers

Page 130

AD10 Autodry

Page 132

AD20, 30 & 50

Autodry

Page 134

Water Management

Autoflush

Page 136

Automatic Hand Dryers

Automatic Hand and Face Dryers

Water Management

www.redring.co.uk

121

Washroom Solutions Selector

Choosing the right solution for your washroom is vitally important.

At Redring, customer support begins before you even buy! This selector should enable you to make a decision, but if you require assistance, please ring our customer techline on 0844 372 7766 for further information.

Application Demand

Flush Control Hand Washing

Storage

See page 64 for

Water Heating selector

Manual

Instantaneous

Automatic

Choose

Redring Water

Management

Choose from

Redring’s range of Instant Hand

Wash Units

Choose

Redring’s No

Touch Automatic

Hand Wash Unit

Autoflush 136 Instant 3 126 Instant 7 126 Autosensor 124

Hand Drying

Drying requirement

Hand Drying

Hand & Face

Drying

Choose from

Redring’s Hand

& Face Dryers

Choose from

Redring’s Hand

Dryers

AD1 130 AD10 132 Turbo-Airflo 128 AD20,

AD30 & AD50

134

122 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

123

Dimensions

Vortex non-scale outlet

124mm 90mm

200mm

Technical

Specification

Product

variant

AV3

Direct connections to water mains I Standard 15mm pipework I Top, bottom or rear cable entry I Standard BSP ½” connections I Full fixing pack supplied I Operating water pressure 0.7 - 7bar

(10 - 100psi) I Water pressure operated power switch.

kW loading

@ 230-240V

3

Cable size guide

1.5mm

2

Fuse rating guide

13 amps

124 Technical 0844 372 7766 Sales 0844 372 7750

Autosensor

Touch-free Vortex Spray Hand Wash Unit

Ideal for environments where cross-contamination must be avoided, such as hospitals and food preparation areas, the

Autosensor is a unique and patented hand wash unit, operated by a no-touch sensor. The unit is also fitted with a unique non-scaling vortex spray outlet and an automatic shut-off to eliminate waste water.

Application

Hand washing.

Key Features

Touch free hygienic operation prevents cross contamination I Infra-red sensor activates water output for economy I Compact ergonomic design I Solenoid valve on/off and recessed flow control knob to prevent unwanted flow adjustments I Vortex spray outlet is non-scaling and maintenance free I Swivel 200mm stainless steel spray arm I No standing heat losses I

Touch-free time cycle cut-off 20 - 25 seconds.

Safety Features

Fully temperature stabilised ‘Heat on’ LED indicator I

Overheat protection I Timed shut-off set at approximately 20 seconds.

Rating

Controls

3kW @ 240V.

Automatic no-touch infra-red sensor.

Outer Casing

Easy clean I Polar white I Thermoplastic.

Heat Unit

Sheathed heating elements.

Water Container

Copper.

Ingress

Protection

IPX4.

Pressure

Accessories

Approvals

Guarantee

Operating water pressure - 0.7 to 7bar (10 - 100psi).

Extended length spray arm - 380mm I Short length spray arm - 100mm.

BEAB Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code Cat. No

Autosensor

Ext. length spray arm, 380mm

AV3

Short length spray arm, 100mm

43591015

85768322

85768330

www.redring.co.uk

125

Vortex non-scale outlet

Dimensions

109mm 105mm

200mm

Technical

Specification

Direct connections to water mains I Standard 15mm pipework I

Top, bottom or rear cable entry I Standard BSP ½” connections I Full fixing pack supplied I Operating water pressure 0.7 - 7bar

(10 - 100psi) I Water pressure operated power switch.

Product

variant

IV3

IV7

kW loading

@ 230-240V

2.7 - 3

6.6 - 7.2

Cable size guide

1.5mm

2

4/6mm

2

Fuse rating guide

13 amps

30 amps

126 Technical 0844 372 7766 Sales 0844 372 7750

Instant 3 & 7

Vortex Spray Hand Wash Units

Economical and instant, these patented hand wash units are compact and simple to operate with a single on/off and temperature control lever. They are also fitted with our unique

Vortex spray outlet which eliminates the need for costly maintenance due to the build-up of scale in hard water areas.

Application

Key Features

Hand washing.

Compact ergonomic design I Single control lever for on/off and temperature selection I Vortex spray outlet is non-scaling and maintenance free I Swivel 200mm stainless steel spray arm I No standing heat losses.

Safety Features

Fully temperature stabilised ‘Heat on’ neon indicator I

Overheat protection.

Rating

3kW and 7.2kW.

Controls

Outer Casing

Heat Unit

Single rotary control lever for on/off and temperature selection.

Easy clean I Polar white I Thermoplastic.

Sheathed heating element.

Water Container

Copper.

Ingress

Protection

IPX4.

Pressure

Accessories

Approvals

Guarantee

Operating water pressure - 0.7 to 7bar (10 - 100psi).

Extended length spray arm - 380mm I Short length spray arm - 100mm

BEAB Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference Short Code

Instant 3

Instant 7

Extended length spray arm

Short length spray arm

I3V

I7V

Cat. No

43769715

43769915

85768322

85768330

www.redring.co.uk

127

Dimensions

348mm 185mm

Technical

Specification

Heating element closed coil nickel chromium wire I Sensor range

150mm I Peak air temperature rise (°C) 23 I Noise level at 1 metre

(dBA) 78.

128 Technical 0844 372 7766 Sales 0844 372 7750

ADP1 Turbo-Airflo

High Velocity Automatic Hand Dryer

Hand dryers score significantly over paper towels as germfree warm air is an extremely hygienic drying medium; with no risk of cross-infection between users. The all new Turbo-Airflo hand dryer improves on this by saving on both time and energy too, with its fast drying, high velocity airflow delivery. Approved by the Health and Safety Executive as well as the Ministry of

Defence for use in commercial and office environments, it is also accepted by the National Health Service.

Application

Key Features

Hand hygiene.

High velocity airflow for fast drying I Energy efficient, as fast dry times mean the unit is off more of the time I

Noise levels the same as standard dryers I Fully automatic I Light to medium use installations - ideal for food preparation areas, surgeries or clinics I Easy clean I Cover cast aluminium alloy with white epoxy paint I Fast drying time - 15-22 seconds I

UK designed.

Safety Features

Ingress protection - IP23 I Infra-red ‘no touch’ on/off sensor to prevent cross contamination I

Over-temperature cut-out.

Rating

1.7kW @ 240V.

Weight

5.8kg.

Outer Casing

Heat Unit

Motor / Fan

Air Speed

Air Volume

Ingress

Protection

Approvals

Guarantee

Cover cast aluminium alloy with white epoxy paint.

Heating element closed coil nickel chromium wire.

345W.

44m/s.

150 (m

3

/h).

IP23.

CE.

3 year product guarantee (UK).

Product Range

Product Reference

Turbo-Airflo

Short Code

ADP1

Cat. No

56751801

www.redring.co.uk

129

Dimensions

225mm

125mm

Technical

Specification

Heating element closed coil nickel chromium wire I

Sensor range 150mm I Noise level at 1 metre (dBA) 63.

AD1 Autodry

Compact Automatic Hand Dryers

Germ-free warm air is an extremely hygienic drying medium; with no risk of cross-infection between users. Hand dryers are approved by the Health and Safety Executive as well as the Ministry of Defence for use in commercial and office environments. Also accepted by the National Health Service resulting in increasingly widespread use in British hospitals.

Application

Hand hygiene.

Key Features

Light/medium use installations - food preparation areas, surgeries or clinics I Easy clean I White and chrome options I UK manufactured.

Safety Features

Infra-red ‘no touch’ on/off sensor to prevent cross contamination I Ingress protection - IP24 I Class II insulation, so no need to earth I Over-temperature cut-out.

Rating

Weight

1.5kW @ 240V.

1.9kg.

Outer Casing AD1

- White I AD1Ch - Chrome plated thermoplastic.

Heat Unit

Motor / Fan

Air Speed

Air Volume

Ingress

Protection

Approvals

Guarantee

Heating element closed coil nickel chromium wire.

60W.

15m/s.

120m

3

/hr.

IP24.

BEAB Approved I CE.

2 year product guarantee (UK).

Product Range

Product Reference

Autodry 1

Autodry 1 Chr

Short Code

AD1

AD1Ch

Cat. No

56751501

56751570

130 Technical 0844 372 7766 Sales 0844 372 7750 www.redring.co.uk

131

Dimensions

AD10

268mm

140mm

AD10S

268mm 140mm

Technical

Specification

Heating element closed coil nickel chromium wire I

Sensor range 150mm I Noise level at 1 metre (dBA) 63.

132 Technical 0844 372 7766 Sales 0844 372 7750

AD10 Autodry

Automatic Hand Dryers

Hygiene is an area where warm air dryers score significantly over paper or linen towels. Germ-free warm air is an extremely hygienic drying medium; with no risk of cross-infection between users. Hand dryers are approved by the Health and

Safety Executive as well as the Ministry of Defence for use in commercial and office environments. Also accepted by the

National Health Service resulting in increasingly widespread use in British hospitals.

Application

Key Features

Hand hygiene.

Light/medium use installations - food preparation areas, surgeries or clinics I White, chrome and stainless steel options I UK manufactured I Easy clean I

Fully automatic.

Safety Features

Infra-red ‘no touch’ on/off sensor to prevent cross contamination I Ingress protection - IP21 I Class II insulation, so no need to earth I Over-temperature cut-out.

Rating

1.7kW @ 240V.

Weight

Outer Casing

Heat Unit

Motor / Fan

Air Speed

Air Volume

Ingress

Protection

Approvals

Guarantee

2.5kg.

AD10

- White I AD10Ch - Chrome plated thermoplastic I AD10S - Stainless steel.

Heating element closed coil nickel chromium wire.

100W.

18m/s.

180m

3

/hr.

IP21.

BEAB Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference

Autodry 10

Autodry10Ch

Autodry10S

Short Code

AD10

AD10Ch

AD10S

Cat. No

56750540

56750570

56750541

www.redring.co.uk

133

Dimensions

336mm 190mm

Technical

Specification

Heating element closed coil nickel chromium wire I

Sensor range 150mm I AD20 Noise level at 1 metre (dBA) 64

I AD30 Noise level at 1 metre (dBA) 78 I AD50 Noise level at

1 metre (dBA) 78.

134 Technical 0844 372 7766 Sales 0844 372 7750

AD20, 30 & 50 Autodry

Automatic Hand and Face Dryers

With fully automatic operation the AD20 is ideal for installation where noise needs to be kept at a minimum, whilst the AD30 provides increased airflow for faster hand and face drying. For installation at the busiest washrooms we recommend the AD50.

Application

Hand and face hygiene.

Key Features

Hand and face drying I Medium to high use installations (AD50C - High use) - ideal for motorway services, factories, schools & sports centres I Easy clean I Stainless & aluminium steel options I White & chrome options I UK manufactured I Fully automatic

I AD20 Quiet operation I AD30 Fast drying time I

AD50C

High volume air-flow for faster drying.

Safety Features

Infra-red ‘no touch’ on/off sensor to prevent cross contamination I Ingress protection - IP23 I

Over-temperature cut-out.

Rating

Weight

2kW @ 240V, 2.4kW @ 240V and 2.5kW @ 240V.

AD20

and AD30 - 6.5kg I AD50C - 15kg.

Outer Casing AD20

and AD30 cast aluminium epoxy paint.

AD30

chrome, chrome cast aluminium chrome plated.

AD50C

cast iron vitreous enamelled.

Heat Unit

Heating element closed coil nickel chromium wire.

Motor / Fan AD20

- 60W I AD30 - 200W I AD50 - 300W.

Air Speed

Air Volume

AD20

AD20

IP23.

- 12m/s I AD30 - 22m/s I AD50 - 25m/s.

- 150 I AD30 - 220 I AD50 - 250m

3

/hr.

Ingress

Protection

Approvals

Guarantee

BEAB Approved I CE.

3 year product guarantee (UK).

Product Range

Product Reference

Autodry 20

Autodry 30

Autodry 30 Chrome

Autodry 50C

Short Code

AD20

AD30

AD30Ch

AD50

Cat. No

56751303

56751404

56751470

56751118

www.redring.co.uk

135

Dimensions and Application

143mm

45°

2.5m

Technical

Specification

NB:

Water Bylaw 83 states that where urinals are installed there must be a method of controlling the flushing, preventing inflow during times when they are not being used I Note 2 - Designed to be used with a cistern. Unsuitable for pressurised systems I Water connections -

15mm compression I Recommended cable - 2 core, CSA 0.5mm

2

(Outer diameter 5.4mm).

Product Sensor Sensor Battery pack

variant

AF1

range supplied

Passive Up to 4m 10.5V, 3.6Ah infra-red

Solenoid valve

9V DC latching lithium long-life (0-12bar)

136 Technical 0844 372 7766 Sales 0844 372 7750

Autoflush

Water Management

The Autoflush is a compact, unobtrusive automatic urinal flush controller which maintains hygiene whilst eliminating water wastage as required by Water Bylaw 83. Ideal for offices, public conveniences, hotels, restaurants, leisure facilities and factories, the Autoflush requires no electrical mains connection and is supplied with a dedicated long-life lithium battery.

Application

Key Features

A powerful PIR sensor detects when someone approaches the urinals and switches a solenoid valve to open, allowing water to flush to the cistern I Typical water savings of over 70% per annum. Capital costs may be recouped in less than two years I Built-in cleansing flush (every 12 or 24 hours) for maximum hygiene during unoccupied periods I Choice of 10, 20 or 30 minute timed flow after detection (factory set to

30 minutes) I Red LED indicates when battery is low.

Safety Features

No mains electrical connection required, long-life lithium battery supplied.

Rating

Controls

Long-life lithium battery.

PIR sensor.

Outer Casing

Ingress

Protection

Pressure

Accessories

Approvals

Guarantee

Water management.

Non-corrosive polar white ABS plastic box.

IPX4.

Operating water pressure - 0.7 to 7bar (10-140psi).

Vandal-proof cover I Spare Battery.

Restrictors - WRAS I Valve - WRAS I

Battery - UL I CE.

1 year product guarantee (UK).

Product Range

Product Reference

Autoflush

Spare battery

Short Code

AF1

BAT

Cat. No

27900001

96900102

www.redring.co.uk

137

Technical Tables

Temperature

Conversion

Table

°C °F

1 33.8

5 41.0

10 50.0

15 59.0

20 68.0

25 77.0

30 86.0

35 95.0

40 104.0

45 113.0

50 122.0

55 131.0

60 140.0

65 149.0

70 158.0

75 167.0

80 176.0

85 185.0

90 194.0

95 203.0

100 212.0

Pressure Conversion Table

12

13

14

15

8

9

10

11

4

5

6

7

Head

Feet

1

2

3

20

21

22

23

16

17

18

19

24

25

5.2

5.6

6.1

6.5

3.5

3.9

4.3

4.8

Pressure llb / in

2

0.4

0.9

1.3

1.7

2.2

2.6

3.0

8.7

9.1

9.5

10.0

6.9

7.4

7.8

8.2

10.4

10.8

Required Hot Water Requirements

Handwashing

Kitchen sink

Cleaning

1 to 2.5 litres per person (40°C)

2 to 7 litres per person (60°C)

10 litres per day (60°C)

138 Technical 0844 372 7766 Sales 0844 372 7750

Pressure Conversion Table

(continued)

45

46

47

48

41

42

43

44

49

50

37

38

39

40

33

34

35

36

29

30

31

32

Head Pressure

Feet llb / in

2

26 11.3

27

28

11.7

12.1

12.6

13.0

13.4

13.9

14.3

14.7

15.2

15.6

16.0

16.5

16.9

17.3

17.8

18.2

18.6

19.1

19.5

19.9

20.4

20.8

21.2

21.7

62

63

64

65

58

59

60

61

54

55

56

57

Head

Feet

51

52

53

70

71

72

73

66

67

68

69

74

75

25.1

25.6

26.0

26.4

26.9

27.3

27.7

28.2

Pressure llb / in

2

22.1

22.5

23.0

23.4

23.8

24.3

24.7

28.6

29.0

29.5

29.9

30.3

30.8

31.2

31.6

32.1

32.5

95

96

97

98

91

92

93

94

99

100

87

88

89

90

83

84

85

86

79

80

81

82

Head Pressure

Feet llb / in

2

76 32.9

77

78

33.4

33.8

34.2

34.7

35.1

35.5

36.0

36.4

36.8

37.3

37.7

38.1

38.6

39.0

39.4

39.9

40.3

40.7

41.2

41.6

42.0

42.5

42.9

43.4

Required Hot Water Requirements

(continued)

Bath

Hairdressing

Dishwasher

60 litres per bath (60°C)

10 litres per shampoo (40°C)

2 litres per meal (60°C)

www.redring.co.uk

139

Technical Tables

Standard Formulae

Loading Calculations

(excluding heat losses)

Time to heat =

Litres x Temp rise (°C)

water (mins)

kW loading x 14.3

= Gallons x Temp rise (°F)

kW loading x 5.7

kW loading =

Litres x Temp rise (°C)

required

Time (mins) x 14.3

= Gallons x Temp rise (°F)

Time (mins) x 5.7

Performance Calculations

Litres per minute flow

=

Temp rise °C =

Temp rise °F =

kW loading x 14.3

Temp rise (°C) kW loading x 14.3

Litres per min flow kW loading x 5.7

Gallons per min flow

kW loading =

Litres x Temp rise (°C)

required

Time (mins) x 14.3

Hot Water Recovery Chart

1.0

2.0

3.0

4.0

6.0

8.0

9.0

12.0

15.0

Litres of Water

5 7 10 15 30 60 80 100

18 25 35 55 105 210 280

9 13 18 27 55 105 140 175

6 9 12 18 35 70 95 120

5 7 9 14 27 55 70 90

3 5 6 9 18 35 50 60

3 4 5

2 3 4

2 2 3

2 2 3

7 14 27 35 45

6 12 24 31 49

5 9 18 24 30

4 7 14 19 24

140 Technical 0844 372 7766 Sales 0844 372 7750

Physical Constants

Length 1m = 3.28ft

1ft = 30.8cm

Volume 1gal = 4.54l

= 277 cu. ins.

= 10lbs (water)

1litre = 0.22gals

= 1000cm 3

= 1kg (water)

1000l = 1m 3

Weight 1lb = 0.45kg

1kg = 2.21lbs

Pressure 1bar = 14.5psi = 100kN/m

2

1ft head of water = 0.434psi

1m head of water = 9.8kN/m 2

1 joule

= 1 watt second

(Ws)

1 kW hour

= 3412 Btu

= 860kcal

1 British Thermal = heat required to

Unit (Btu)

raise 1lb water

through 1°F

= 17.6 watt mins

= 0.252kcal

1 kilocalorie (kcal) = Heat required to

raise 1kg water

through 1°C

= 4187Joules

= 3.97Btu

Hot Water Recovery Chart (continued)

1.0

2.0

3.0

4.0

6.0

Litres of Water

150 200 250 300 400 600 800 1000

265

175 235 295

135 175 220 265

90 120 150 175 235 350 470 585

8.0

9.0

70 90 110 135 185 265 350 440

60 80 100 120 160 235 315 390

12.0 45 60 75 90 120 175 235 295

15.0 35 50 60 70 95 140 190 235

www.redring.co.uk

141

Approvals and

Associations

Waste Electrical and Electronic Equipment Directive

Redring can confirm that all our responsibilities under the Waste

Electrical and Electronic Equipment Directive will be fulfilled in accordance with the law. As required within its provisions we are members of an accredited WEEE recycling scheme for all product categories within the scope of the directive.

WEEE product registration number: WEE/EE0202VV.

Electric showers approved to BEAB CARE standard for thermostatic performance in care establishments.

The BEAB Approved Mark is the electrical safety mark of the UK’s leading independent approvals specialists. It confirms to all in the supply chain that all products displaying the mark have been evaluated to the highest European and International safety standards.

Redring products are CE marked where necessary to certify that the product fulfills the requirements of all relevant European product directives.

Products approved for connection to the water mains supply.

Inclusive Design Approved - following independent testing. Suitable for all sections of the community.

142 Technical 0844 372 7766 Sales 0844 372 7750

UK Sales

Sales Hotline 0844 372 7750

Sales Fax 0844 372 7760

Technical Services

Techline

Techfax

0844 372 7766

0844 372 7767

International Sales

Redring is a great British brand in every sense of the word. It is also a world leader in showering and hot water solutions, demanded in over twenty countries worldwide.

Redring has achieved this by taking into consideration global market requirements and ensuring products are developed to meet these needs, as well as developing products for specific countries and regions, taking into consideration approvals, electrical supply and climate.

For further details call:

Sales Hotline +44 (0) 1733 456789

Sales Fax +44 (0) 1733 456727

All Redring products, unless otherwise stated, are covered by a full parts and labour guarantee for 1 year from the date of purchase, so should the product become faulty within the guarantee period, it will be replaced with a new product or repaired by our service engineers, totally free of charge.

Redring reserve the right to alter product specification or appearance without prior notice. All finishes in the brochure are as accurate as printing processes allow.

05/2013 Redring Xpelair Group Limited.

All rights reserved

Redring Xpelair Group Limited

Newcombe House, Newcombe Way

Orton Southgate, Peterborough

PE2 6SE t +44 (0) 844 372 7761 f +44 (0) 844 372 7762 www.redring.co.uk

[email protected]

www.youtube.com/user/redringsolutions www.twitter.com/redringsolution

R053 May 2013

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement