Seiko 4R36 Specifications

Seiko 4R36 Specifications
Cal. 4R35/36/37/38/39
INSTRUCTIONS
(P.
BEDIENUNGSANLEITUNG
(S. 27)
3)
INSTRUCTIONS
(P.
54 )
ISTRUZIONI
(P.
79)
INSTRUCCIONES
(P. 105)
INSTRUÇÕES
(P. 131)
ИНСТРУКЦИИ
(P. 157)
(182
)
Sie sind jetzt stolzer Besitzer eines SEIKO Automatikuhr Kal. 4R35/36/37/38/39. Lesen Sie diese
Bedienungsanleitung vor der Verwendung aufmerksam durch, um Ihre Uhr optimal zu nutzen.
Heben Sie diese Bedienungsanleitung gut auf, um jederzeit wieder nachlesen zu können.
Vous voici l'heureux propriétaire d'une montre automatique SEIKO Cal. 4R35/36/37/38/39.
Pour en obtenir des performances optimales, veuillez lire attentivement cette brochure avant
d'utiliser la montre. Conservez ce manuel pour vous y référer en cas de besoin.
Grazie di aver acquistato questo nuovo Orologio Automatico SEIKO Cal. 4R35/36/37/38/39. Per
poter utilizzare l’orologio al massimo delle sue prestazioni leggere attentamente questo manuale
di istruzioni prima di passare all’uso dell’orologio stesso, e conservarlo poi per qualsiasi eventuale
futura consultazione.
Usted es ahora el orgulloso propietario de un Reloj Autom tico de SEIKO Cal. 4R35/36/37/38/39.
Para asegurar el óptimo rendimiento de su reloj, sírvase leer cuidadosamente las instrucciones
contenidas en este manual antes de su uso. Guarde este manual en un lugar muy accesible
para la rápida referencia.
Vo c ê p o d e r á s e n t i r- s e o r g u l h o s o d e p o s s u i r u m R e l ó g i o A u t o m á t i c o S E I KO C a l .
4R35/36/37/38/39. Para garantir o seu excelente rendimento, leia atentamente as instruções
contidas neste opúsculo antes de usá-lo. Conserve este manual à mão para consultas futuras.
Вы стали гордым обладателем автоматических часов SEIKO калибра 4R35/36/37/38/39.
Чтобы использовать часы оптимальным образом, внимательно прочитайте эту
инструкцию, прежде чем приступать к пользованию. Сохраните эту брошюру, чтобы
обратиться к ней в случае необходимости.
歡迎購買精工 4R35/36/37/38/39 機型自動手錶。為保證在最佳狀態下操作手錶,請在
使用手錶之前仔細閱讀本手冊內的各項使用說明。並妥善保管本使用手冊以備今後參考。
ENGLISH
You are now the proud owner of a SEIKO Automatic Watch Cal. 4R35/36/37/38/39. To ensure
its optimum performance, please read the instructions in this booklet carefully before using it.
Please keep this manual handy for ready reference.
CONTENTS
Page
CHARACTERISTICS OF A MECHANICAL WATCH....................................... 4
NAMES OF THE PARTS.................................................................................. 5
HOW TO USE.................................................................................................. 9、
HOW TO SET THE TIME AND DATE (FOR CAL. 4R35 AND 4R37).............11、
HOW TO SET THE TIME, DAY AND DATE (FOR CAL. 4R36).......................14、
HOW TO SET THE TIME (FOR CAL. 4R38 AND CAL. 4R39).......................17、
TO PRESERVE THE QUALITY OF YOUR WATCH.........................................18、
PLACES TO KEEP YOUR WATCH..................................................................22、
NOTES ON OVERHAUL..................................................................................22、
NOTES ON GUARANTEE AND REPAIR.........................................................23、
TROUBLESHOOTING.....................................................................................23、
ACCURACY OF MECHANICAL WATCHES....................................................25、
SPECIFICATIONS............................................................................................26
3
Hour hand
55
Hour hand
Minute hand
60
24-hour hand
Minute hand
5
10
CROWN
20
15
40
● This mechanical watch operates using power obtained from a mainspring.
● If the watch is completely stopped, manually turn the crown approximately 20
times to wind up the mainspring to start the watch.
● While loss/gain of a quartz watch is indicated by a monthly or annual rate, accuracy
of a mechanical watch is normally indicated by a daily rate (loss/gain per day).
● Normal usage accuracy of a mechanical watch varies according to conditions of
use (time period that the watch is worn on the wrist, temperature environment,
hand movement, and winding state of the mainspring).
● When the watch is affected by strong magnetism, it temporarily gains or loses
time. If the watch encounters a strong magnetic field, the parts of the watch may
be magnetized. In this case, repairs such as removal of magnetism are required.
Contact the retailer from whom the watch was purchased.
● 4R37
50
(self-winding type, automatic winding type)
● 4R35
45
English
CHARACTERISTICS OF A MECHANICAL WATCH
NAMES OF THE PARTS
English
CAL. 4R35/36/37/38/39
35
30
Second hand
CROWN
a b c
a b c
25
Date
Second hand
Date
CROWN
a) Normal position
: winding up the mainspring (manual operation)
b) First click position
: date setting
c) Second click position : time setting
4
5
60
24 hour hand
Minute hand
20
30
CROWN
CROWN
CROWN
15
45
10
40
35
a b c
a
a b
b
25
Date and Day
CROWN
a) Normal position
: winding up the mainspring (manual operation)
b) First click position
: date/day setting
c) Second click position : time setting
6
Hour hand
Minute hand
5
50
55
Second hand
Hour hand
Minute hand
Hour hand
● 4R39
English
English
● 4R38
● 4R36
Second hand
CROWN
a) Normal position
b) First click position
Second hand
: winding up the mainspring (manual operation)
: time setting
7
English
The crown
turns.
The crown of your watch is
the screw lock type.*
To set the watch
The crown
does not
turn.
Unscrew the crown by turning it
counterclockwise.
Go to
"HOW TO
USE"
● How to manually wind the mainspring by turning the crown
55
Unscrew.
60
5
10
50
Turn the
crown
clockwise.
This watch is an automatic watch equipped with a manual winding mechanism.
• When the watch is worn on the wrist, the motion of the wearer's arm winds the
mainspring of the watch.
• If your watch is completely stopped, it is recommended that you manually wind
the mainspring by turning the crown.
20
40
8
If your watch has a screw-lock crown, the crown will screw into the watch case
for added protection.
• After completing all settings of the watch, screw the crown in again by turning it clockwise while pressing it.
• If the crown turns out to be too stiff to be screwed in, turn the crown counterclockwise once and then give another try.
• Do not screw it in by force as it may damage the slots of the crown.
15
45
Screw up.
*
English
HOW TO USE
● Check the type of the crown of your watch
35
•
30
25
1. Slowly turn the crown clock wise (in
the 12 o’clock direction) to wind the
mainspring.
Turning the crown counterclockwise (the
6 o’clock direction) does not wind the
mainspring.
2. Continue to turn the crown until the
mainspring is sufficiently wound. The
second hand will start moving.
3. Set the time and date before putting the
watch on your wrist.
The winding operation for 4R35, 4R36, 4R37, 4R38 and 4R39 are the same.
9
(FOR CAL. 4R35 AND 4R37)
Check that the watch is operating, and then set the time and date.
The watch is provided with a date function and is so designed that the date
changes once every 24 hours. The date changes around 12 o’clock midnight. If
AM/PM is not properly set, the date will change around 12 o’clock noon.
55
60
5
10
15
40
1. Pull out the crown to the first click. (The second hand
continues moving and the accuracy of the watch is
unimpaired.)
2. T he d a te c an b e s e t by tur nin g the c r ow n
counterclockwise. Turn it until the previous day’s
date appears.
Ex.) If today is the 5th of the month, first set the date to
”4” by turning the crown counterclockwise.
20
•
•
50
•
HOW TO SET THE TIME AND DATE
45
English
•
•
There is no need to turn the crown further when the mainspring is fully wound. But
the crown can be turned without damaging the watch mechanism.
Once the watch is wound up fully, it operates for about 41 hours.
If the watch is used without being wound up fully, gain or loss of the watch may
result. To avoid this, wear the watch for more than 10 hours a day. If the watch is
used without wearing on the wrist (if it is used on the desk like a clock, for example), be sure to wind it up fully every day at a fixed time.
If the watch has stopped with the mainspring unwound, winding the mainspring
with the crown will not start the watch immediately. This is because the mainspring torque (force) is low at the beginning of its winding due to the characteristics
of mechanical watches. The second hand starts to move when a certain degree
of strong torque is reached after the mainspring has been wound up. However,
swinging the watch from side to side to forcibly turn the balance can start the
watch sooner.
English
•
35
30
25
CAUTION
•
10
Do not set the date between 9:00 p.m. and 1:00 a.m. If you do so, the date
may not change properly / it may cause a malfunction.
11
50
5
CAUTION
● Date adjustment at the beginning of the month
55
60
5
10
It is necessary to adjust the date on the first day after a
month that has less than 31 days.
Ex.) To adust the date in the a.m. period on the first day
of a month following a 30-day month.
15
40
1. The watch displays “31” instead of ”1”. Pull out the
crown to the first click.
2. Turn the crown to set the date to “1” and then push
the crown back in to the normal position.
20
25
50
30
45
35
Cal. 4R37 has a 24-hour hand, which moves correspondingly with
the hour hand. When setting the time, check that the 24-hour hand is
correctly set.
24-hour hand
The mechanism of mechanical watches is different from that of quartz
watches. When setting the time, be sure to turn back the minute hand a
little behind the desired time and then advance it to the exact time.
20
15
45
•
English
English
60
10
•
55
40
3. Pull out the crown to the second click when the
second hand is at the 12 o’clock position. (The
second hand stops on the spot.)
Turn the crown to advance the hands until the date
changes to the next. The time is now set for the
a.m. period. Advance the hands to set the correct
time.
4. Push the crown back in to the normal position in
accordance with a time signal.
35
30
25
CAUTION
10:08
12
22:08
•
Do not set the date between 9:00 p.m. and 1:00 a.m. If you do, the date may
not change properly / it may cause a malfunction.
13
60
50
45
20
30
25
45
20
15
30
25
CAUTION
14
35
10
35
CAUTION
•
•
5
5
50
55
40
1. Pull out the crown to the first click. (The second
hand continues moving and the accuracy of the
watch is unimpaired.)
2. The day can be set by turning the crown
clockwise.
3. The date can be set by turning the crown
counterclockwise. Turn it until the previous day’s
date appears.
Ex.) If today is the 5th of the month, first set the date
to “4” by turning the crown counterclockwise.
60
40
Check that the watch is operating, and then set the time, day and date.
The watch is provided with a day and date function and is so designed that the
day and date changes once every 24 hours. The date changes around 12 o’clock
midnight, and the day around 4:00 a.m. If AM/PM is not properly set, the date
will change around 12 o’clock noon, and the day around 4:00 p.m.
55
15
•
•
4. Pull out the crown to the second click when the
second hand is at the 12 o’clock position. (The
second hand stops on the spot.)
Turn the crown to advance the hands until the
date changes to the next. The time is now set
for the a.m. period. Advance the hands to set
the correct time.
5. Push the crown back in to the normal position
in accordance with a time signal.
10
English
(FOR CAL. 4R36)
English
HOW TO SET THE TIME, DAY AND DATE
Do not set the date between 9:00 p.m. and 4:00 a.m. If you do, the date
may not change properly / it may cause a malfunction.
The mechanism of mechanical watches is different from that of quartz
watches.
When setting the time, be sure to turn back the minute hand a little behind
the desired time and then advance it to the exact time.
15
60
5
50
55
10
40
20
15
1. The watch displays “31” instead of “1”. Pull out
the crown to the first click.
2. Turn the crown to set the date to “1” and then push
the crown back into the normal position.
45
English
It is necessary to adjust the date on the first day after a month that has less than 31 days.
Ex.) To adust the date in the a.m. period on the first day of a month following a
30-day month.
35
30
25
(FOR CAL. 4R38 AND CAL. 4R39)
1. Pull out the crown to the first click when the second
hand is at the 12 o’clock position. (The second
hand stops on the spot.)
2. Turn the crown to set the hour and minute hands
to the correct time.
3. Push the crown back in to the normal position in
accordance with a time signal.
•
English
HOW TO SET THE TIME
● Date adjustment at the beginning of the month
Cal. 4R39 has a 24-hour hand, which moves correspondingly with
the hour hand. When setting the time, check that the 24-hour hand is
correctly set.
24-hour hand
CAUTION
•
16
Do not set the date between 9:00 p.m. and 4:00 a.m. If you do, the date
may not change properly / it may cause a malfunction.
10:08
22:08
17
English
CAUTION
CAUTION
● CARE OF YOUR WATCH
•
•
The case and band touch the skin directly. Keep the case and band clean at
all times. This will help to extend the life of the watch and will reduce the
risk of skin irritations.
When you take the watch off, wipe off moisture, sweat or soil with a soft
dry cloth as soon as possible. This will help to extend the life of the case,
band and gasket.
<Leather strap>
• Gently blot up the moisture using a soft dry cloth. Do not rub the leather,
as this may cause abrasions or discoloration.
<Metal bracelet>
• To keep the bracelet clean, use a soft toothbrush dipped in clean or soapy
water. Be careful not to get water on the case.
18
● RASH AND ALLERGIC REACTION
English
TO PRESERVE THE QUALITY OF YOUR WATCH
•
Adjust the band to allow a little clearance around your wrist to ensure proper
airflow.
• Prolonged and/or repeated contact with the band may cause skin irritation or dermatitis for those susceptible.
• Possible causes of dermatitis
• Allergic reaction to metals or leathers
• Rust, contamination or perspiration accumulated on the watch case or
band.
• If you should develop any allergic symptoms or skin irritation, immediately
stop wearing the watch and seek medical attention.
● WATER RESISTANCE
● Non-water resistance
If ”WATER RESISTANT” is not inscribed on the case back,
your watch is not water resistant, and care should be taken
not to get it wet as water may damage the movement. If the
watch becomes wet, we suggest that you have it checked
by the retailer from whom the watch was purchased or your
SERVICE CENTER.
19
English
WR
● Water resistance (10 bar/15 bar/20 bar)*
If ”WATER RESISTANT 10 BAR”, ”WATER RESISTANT 15 BAR”
or ”WATER RESISTANT 20 BAR” is inscribed on the case back,
your watch is designed and manufactured to withstand up to
10/15/20
10 bar/15 bar/20 bar, respectively, and is suitable for wearing
bar WR
while taking a bath or shallow diving, but not for scuba diving.
We recommend that you wear a SEIKO Diver’s watch while
scuba diving.
* Before using a water resistant 5, 10, 15 or 20 bar watch in water, make sure
the crown is pushed in completely.
Do not operate the crown when the watch is wet or in water. If used in sea
water, rinse the watch in fresh water and dry it completely.
20
*
When taking a shower while wearing a water resistant 5 bar watch, or
taking a bath while wearing a water resistant 10, 15 or 20 bar watch, make
sure to observe the following:
• Do not operate the crown when the watch is wet with soapy water or
shampoo.
• If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to
normal temperature.
NOTE:
Pressure in bar is a test pressure and should not be considered as corresponding
to an actual diving depth since swimming movements tend to increase the
pressure at a given depth. Care should also be taken when diving with the
watch into water.
English
5 bar
● Water resistance (3 bar)
If ”WATER RESISTANT” is inscribed on the case back, your
watch is designed and manufactured to withstand up to 3 bar,
such as acci­dental contact with splashes of water or rain, but it
is not designed for wearing while swimming or diving.
● Water resistance (5 bar)*
If ”WATER RESISTANT 5 BAR” is inscribed on the case back,
your watch is designed and manufactured to withstand up to 5
bar and is suitable for wearing while swimming, yachting and
taking a shower.
PRECAUTIONS ON WEARING YOUR WATCH
•
•
•
Exercise care when you hold an infant or small child while wearing the
watch on your wrist, as the infant or child may be injured or develop an
allergic reaction caused by direct contact with the watch.
Avoid undue shocks such as dropping or scratching against hard surfaces
or playing active sports, which may cause temporary malfunctions.
There is a possibility of injury caused by wearing the watch on your wrist
especially if you fall down or bump into other people or objects.
21
English
NOTES ON GUARANTEE AND REPAIR
● Do not leave the watch in a place where it will be subjected to strong magnetism
(for example, near television sets, loudspeakers or magnetic necklaces) or static
electricity.
● Do not leave the watch in dusty places.
● Please contact the retailer the watch was purchased from or SEIKO CUSTOMER
SERVICE CENTER for repair or overhaul.
● Within the guarantee period, please present the certificate of guarantee to receive
repair services.
● Guarantee coverage is provided in the certificate of guarantee. Please read
carefully and retain it.
● Do not expose the watch to chemical substances or gases.
(Ex.: Organic solvents such as benzine and thinner, gasoline, nail polish, cosmetic
sprays, detergents, adhesives, mercury, and iodine antiseptic solution.)
TROUBLESHOOTING
● Do not leave the watch where there are strong vibrations.
● Do not leave the watch in close contact with hot spring water.
NOTES ON OVERHAUL
● The watch is a precision device with many moving parts lubricated with special
oils. If the parts run short of oil or get worn out, the watch may lose time or stop
operation. In such a case, have the watch overhauled.
22
Problem
Possible causes
Solutions
The watch stops
operating.
The power supplied
by the mainspring
has been consumed.
Turn the crown or swing the watch to wind
it up. The watch will start operating. If the
watch does not start, consult the retailer
from whom the watch was purchased.
Even though you
wear the watch
every day, it soon
stops operating.
The watch is worn
on your wrist only
for a short period of
time, or the amount
of arm movement is
small.
Wear the watch for an extended period of
time, or when taking off the watch, turn the
crown to wind the mainspring.
English
PLACES TO KEEP YOUR WATCH
23
Solutions
ACCURACY OF MECHANICAL WATCHES
The watch has been
left in extremely high
or low temperatures
for a long time.
Normal accuracy will resume when the
watch returns to normal temperature.
The watch was
brought into close
contact with a
magnetic object.
Normal accuracy will resume when the
watch is kept away from close contact
with the magnetic source. If this condition
persists, consult the retailer from whom the
watch was purchased.
You dropped the watch,
hit it against a hard
surface or wore it while
playing active sports.
The watch was exposed
to strong vibrations.
Normal accuracy will not resume. Consult
the retailer from whom the watch was
purchased.
The watch has not
been overhauled for
more than 3 years.
Consult the retailer from whom the watch
was purchased.
The date change at
12 o’clock noon.
AM/PM is not
properly set.
Advance the hands by 12 hours.
The glass is blurred
and the blur persists
for a long time.
Water got inside the
watch due to the
deterioration of the
gasket, etc.
Consult the retailer from whom the watch
was purchased.
● The accuracy of mechanical watches is indicated by the daily rates of one week
or so.
● The accuracy of mechanical watches may not fall within the specified range of
time accuracy because of loss/gain changes due to the conditions of use, such as
the length of time during which the watch is worn on the wrist, arm movement,
whether the mainspring is wound up fully or not, etc.
● The key components in mechanical watches are made of metals which expand
or contract depending on temperatures due to metal properties. This exerts an
effect on the accuracy of the watches. Mechanical watches tend to lose time at
high temperatures while they tend to gain time at low temperatures.
● In order to improve accuracy, it is important to regularly supply energy to the
balance that controls the speed of the gears. The driving force of the mainspring
that powers mechanical watches varies between when it is fully wound and
immediately before it is unwound. As the mainspring unwinds, the force
weakens.
Relatively steady accuracy can be obtained by wearing the watch on the wrist
frequently for the self-winding type and winding up the mainspring fully everyday
at a fixed time to move it regularly for the wind-up mechanical type.
● When affected by external strong magnetism, a mechanical watch may loss/gain
time temporarily. The parts of the watch may become magnetized depending on
the extent of the effect. In such a case, consult the retailer from whom the watch
was purchased since the watch requires repair, including demagnetizing.
English
The watch
gains/loses time
temporarily.
24
•
For the soluton of troubles other than listed above, contact the retailer from whm the watch was purchased.
English
Possible causes
Problem
25
English
26
SPECIFICATIONS
1 Features
4R35������������������������������������������������������������ 3 hands, time display (Hour, minute and second hands),
and date display
4R36������������������������������������������������������������ 3 hands, time display (Hour, minute and second hands),
day and date display
4R37������������������������������������������������������������ 4 hands, time display (Hour, minute, second and 24hour hands) and date display
4R38������������������������������������������������������������ 3 hands, time display (Hour, minute and second
hands)
4R39������������������������������������������������������������ 4 hands, time display (Hour, minute, second and 24hour hands)
2 Vibrations per hour���������������������������������������������� 21,600
3 Operational temperature range��������������������������� Between -10 ºC and 60 ºC (Between 14 ºF and 140 ºF)
4 Continuous operating time �������������������������������� More than approx. 41 hours
5 Driving system���������������������������������������������������� Automatic winding type with manual winding
mechanism
6 Jewels
4R35������������������������������������������������������������ 23 jewels
4R36, 4R37, 4R38 and 4R39����������������������� 24 jewels
7
Magnetic resistance������������������������������������������� 4,800 A/m (60 gauss)
•
The specifications are subject to change without prior notice for product improvement.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement