Channel Plus | DA-506BID | Specifications | Channel Plus DA-506BID Specifications

Channel Plus DA-506BID Specifications
C51 pg 276
7/31/06
10:06 AM
Page 276
SATV/CATV
Section 14
SATV/CATV
Attenuators . . . . . . . .287
A/V Distribution Amplifiers
278~281, 300
Amplifiers . . . . .278, 281
A/V Switches . . .301, 302
Antenna Rotors . . . . .292
Baluns/Transformers 283,
298~300
Cable Convertors . . . .281
Stereo Convertor . . . .277
Diplexers . . . . . .286, 287
DSS Accessories 294, 295
Ground Loop Isolators 301
Ground Blocks/
Accessories . . . . . . . .287
LNBs/Feedhorns 288, 289
Mast Mount
Preamplifiers . . . . . . .284
Modulators/Demodulators
276~278
Multi-Switches . .289~291
RF Amplifiers . . .279~284
Signal Combiners . . . .278
Signal Meters . ..291, 292
Splitters/
Diplexers . . . . . .285, 286
S-VHS Convertors . . . .302
TV/VCR/LCD
Mounts . . . . . . . .303~305
Video Selectors . .301, 302
Wall Plates
See Section 13
14
Agile Modulators
The consumer agile modulators are unique RF,
UHF and VHF hyperband modulators. Their design
allows the user to insert video from a VCR, laser
disc or any baseband video signal into their home
RF system. The #33-2025 and 33-2035 work on
UHF. The #33-2020 and 33-2030 work on VHF
hyperband or with CATV systems. The single
and dual channel units add flexibility to your
system. Perfect for whole house TV systems
and CCTV systems.
Order #
33-2020
33-2025
33-2030
33-2035
Description
VHF hyperband single output
UHF single output
VHF hyperband dual output
UHF dual output
(ea.)
$159.00
159.00
219.00
219.00
Audio/Video Demodulator
The ZDM-806 is an agile audio/video demodulator.
This unit provides audio and video output from
any channel in the 50~806MHz frequency range.
The ZDM-806 is ideal for signal monitoring and
signal conditioning (audio/video processing and
demodulation) applications. Agile channel selection,
via front panel LED displays and channel up/down
buttons, permits on-the-fly channel changes. The
ZDM-806 takes a single channel in the 50~806MHz
frequency range (either VHF, UHF or CATV
channels) and demodulates the audio and video
information. Baseband audio and video are provided
as outputs. The ZDM-806 features a rock solid, PLL
synthesized frequency control. Frequency selection
is accomplished via front panel LEDs and channel
up/down buttons. A channel lockout mode is also
provided to prevent accidental channel changes.
Features: 50~806MHz agile demodulator, LED
display with convenient channel selection, superior
performance Specifications: RF: •RF input
frequency range: 54~806MHz •Channels: VHF,
UHF, CATV input level-range: -5~+30dBmv •Noise
figure: 8dB Video: •Output level: 1.0V p-p •Output
impedance: 75ohm General: •Power requirements,
voltage: 117, ±10% VAC •Frequency: 60Hz
•Power: 2.5W
Order #
33-2800
(ea.)
$199.00
Order #
33-3070
•Allows use of DVDs, video games, etc. on TVs
without audio/video inputs via RF input •Auto
selection for A/V or antenna inputs •Vertical or
horizontal design with removable base
Order #
CRF900
(ea.)
$12.95
NET 30
Terms
276
Order Online
www.mcminone.com
(ea.)
$779.00
Combiner
The ZHC-12 is a professional quality, passive and active output combiner. This unit is designed for use in
headends to combine the outputs of multiple modulators and processors. The ZHC-12 has twelve (12) broadband
input ports and one combined output port. This combiner features high isolation between ports due to an
integrated directional coupler design. The input ports of the ZHC-12 are broadband, accepting signals in the
50~450MHz frequency range. Specifications: ZHC-12 RF: •Number of inputs: 12 •Frequency range:
50~450MHz •Insertion loss: 16dB •Isolation: 40dB •Impedance-all ports: 75ohm Connectors (rear panel):
•RF input(s): “F” type, female •RF output: “F” type, female •Test port (front panel): “F” type, General: •Power
requirements: •Voltage: 117VAC, ±10% •Frequency: 60Hz Order #
Mfr. #
(ea.)
•Power: 10W Connectors (rear panel): •RF input(s): “F”
ZHC-12
$59.95
type, female •RF output: “F” type, female •Test port (front 33-2820
panel): “F” type, female
Stereo Digitally
Tuned Modulators
RF Modulator
Agile Audio/Video Modulators
The AM Series includes professional quality, agile
audio/video modulators. These units provide audio
and video modulated RF carrier on any channel in
the 50~550MHz frequency range. Agile channel
selection permits on-the-fly channel changes and
reduces the need for large inventories of channelized
products. These modulators have a wide range of
standard and optional features that make them very
suitable for advanced SMATV and CATV systems.
The AM Series takes baseband audio and video and
modulates these signals onto any channel in the
50~550MHz frequency range. Featured options:
4.5MHz audio input, video input, BNC connector,
sub band output, video AGC, spectrum inversion,
balanced audio input, 600ohm, composite video and
4.5MHz audio input, Z-TAC interface, digital
control-parallel, digital control-serial RS-232.
Includes all these options except sub-band
output. Specifications: RF: •Frequency range:
50~450MHz •Frequency range: 50~550MHz
•Channels: VHF, CATV (STD, HRC, IRC)
•Video input level: 1.0V p-p •Frequency
response: fv -0.5MHz~fv +4.2MHz: 1.0MHz
•Video signal-to-noise ratio: 60dB •Input
impedance: 75ohm •Audio input level: 140mV RMS
•Frequency range: 20Hz~20KHz •Input impedance
standard: 10Kohm, unbalanced General: •Power
requirements: •Voltage: 117VAC, ±10% •Frequency:
60Hz •Mfr. #AM-60-550
Front
Back
The Gold Series
modulators distribute
MTS Stereo Surround Sound, along with a high
quality video signal, to multi-room locations. Digital
phase lock loop (PLL) tuning eliminates channel
drift. Exclusive DVD compatible technology
eliminates poor video performance, caused by DVD
copy-guard, common when modulating DVD signals.
125 digitally selectable channels for easy channel
selection. UHF channels 14~69; cable channels
54~94, 100~125. Local antenna or cable and
audio/video loop through. Full channel memory.
•Limited quantities
Order #
33-6860
33-6870
Mfr. #
2002G
4004G
Inputs/Outputs
(ea.)
Dual channel
$459.00
Four channel
799.00
(2-up)
$449.00
771.47
Digitally Tuned Modulators
The Theater 1001F is a digitally tuned modulator
that distributes high quality audio/video signal to
multi-room locations. The digital phase lock loop
(PLL) tuning eliminates channel drift. 120
selectable channels: UHF channels 14~69; cable
channels 60~94, 100~125. Binary Code Decimal
(BCD) channel selector for easy tuning. Isolated
right and left mono inputs improve audio
performance. Features: Switch type channel select
and full channel memory for power outages.
Order #
33-7255
Mfr. #
1001F
Channels
Single
(ea.)
$69.95
C51 pg 277
7/31/06
10:07 AM
Page 277
SATV/CATV
Designed for high-end, rack-mount installations and structured cable enclosures, the T2 modulator line
provides the ultimate solution for the custom installer. All T2 modulators come with S-video inputs and a
unique feature that provides a contact closure upon the detection of video at the input. Whether enclosure
mounted or rack mounted, these products are designed to complement the high-end systems they support
in both performance and aesthetics.
Section 14
Modulators
MD-1 Adjacent Channel
Rack Mount Modulator
•Adjacent channel operation uses only one 6MHz
channel slot to create a local channel •S-video
compatible enables connection to high-quality video
components •Adjustable high-power output easily
tune the modulated channel to balance with the rest
of the system (40dBmv) Specifications: •Input
levels: S-video 0.4V~2.7V p-p adjustable, audio:
100mV RMS~3V RMS adjustable •Video
performance: differential gain less than 5% (0.5dB),
Differential phase less than 5° •RF output: Channel
range TV 2~78, STD 2~135, HRC 2~135, IRC 2~135
•Output level range 25~40dBmV adjustable
•IM distortion -60dBC •BTSC audio performance
•Frequency range 20Hz~20KHz +/- 1dB
•SNR greater than 60dB •All channel ranges
exclude channels 95~99
Order #
33-10165
Mfr. #
MD1
(1-9)
$779.00
(10-up)
$662.00
MD-4 Quad Channel
Rack Mount Modulator
•Quad channel operation can easily modulate four
signals from one piece •S-video compatible enables
connection to high-quality video components
•Adjustable high-power output easily tune the
modulated channel to balance with the rest of the
system (35dBmv) Specifications: •Input levels:
S-video 0.8V~2.7V p-p adjustable @ 75, audio: 1V p-p
with +/- 25KHz deviation •Video performance:
differential gain less than 5% (0.5dB), differential
phase less than 5° •RF output: Channel range
TV14~78, STD 65~135, HRC 65~135, IRC 65~135
•Output level range 25~35dBmV adjustable
•IM distortion -60dB •All channel ranges
exclude channels 95~99
Order #
33-10170
Mfr. #
MD4
(1-9)
$389.00
(10-up)
$330.65
MD-EM1 Single Channel Modulator
•Adjustable high-power output •Easily tune the modulated channel
to balance with the rest of the system (30dBmv) •Enclosure mount comes with
patented T2 locking system that allows for mounting in all leading structured cable
enclosures •Adjustable video modulation level input ensuring compatibility with all
source equipment Specifications: •Input levels: S-video 0.8V~2.7V p-p adjustable
@ 75, audio: 1V p-p for +/- 25% deviation •Video performance: Differential gain less
than 5% (0.5dB), differential phase less than 5° •RF output: Channel range TV
14~78, STD 65~135, HRC 65~135, IRC 65~135 •Output level range 25~35dBmV
typical •IM distortion -60dB •BTSC audio performance •Frequency range
20Hz~20KHz +/-1dB •SNR greater than 60dB •All channel ranges
exclude channels 95~99
Order #
33-10175
Mfr. #
MDEM1
(1-9)
$219.00
S–Video Modulator
The new SVM series of modulators offers complete
MTS stereo encoding and S-video inputs in a full
component size rack mountable case. The SVM-22
and SVM-24 are two and four channel stereo
modulators with 25dBmV of output and easy push
button programming. The SVM series incorporates
S–video inputs that support both S–video and
composite video feeds with included adaptors.
Offering full MTS stereo with dbx noise reduction
and Dolby Pro Logic® compatibility makes the SVMs
perfect for integration into any home theater
system. The SVM series offers integrated IR control.
Each modulator has IR emitter output jacks and is
compatible with both 12 volt and 5 volt IR systems.
The SVMs, with their new desktop power supplies,
can remotely power a DA-550 or DA-8200 series
distribution panel from up to 75' away.
Order #
SVM-22
SVM-24
Outputs
Dual
Quad
(ea.)
$215.90
323.80
(10-up)
$186.15
14
Digital RF
Modulators
Four Output RF Modulator
and Video Switcher
RF Modulator
Converts up to four audio/video source inputs (DVD,
PVR, VCR, camcorders, video game systems, etc.)
to VHF for viewing on any TV. Switchable between
video sources and cable or antenna. Stereo A/V
and selectable to channel 3 or 4 output. Front panel
instant push button switching. Eliminates the need
for extra monitors. Separate VHF antenna/cable input
simplifies installation and switching of components.
UL listed, FCC approved.
Order #
33-9640
Mfr. #
MOD-41
(ea.)
$21.95
The Terk RF
modulator allows video components such as DVD
players, video games, VCRs and camcorders to be
viewed on televisions that are not equipped with an
available A/V jack. Selectable channel 3 or 4 output,
the modulator automatically switches to the video
source when a signal is detected. Terk’s RF
modulator is the ideal way to connect multiple
components to any television. Mfr. #MOD-34.
Order #
30-1595
(ea.)
$17.95
The 5515, 5525 and 5545 are one, two and four
channel input modulators with loop–out capabilities
and integrated IR control. Each offers IR emitter
output jacks and the ability to remotely power a
DA-550 series or an DA-8200 series distribution
panel from up to 75' away. The 5500 series works
with both the 12 volt and 5 volt IR systems and
accessories. The 5515, 5525 and 5545 offer 75ohm
termination jumpers on all channels to loop–through
the video and audio signals. Features include: 1, 2
and 4 channels, push button programming, UHF
14~64 and CATV 65~125, 25dBmV output.
Order #
5515
5525-01
5545-01
Outputs
1
2
4
(ea.)
$72.00
117.70
187.55
MINI RF
Modulator
The TERK MINI modulator is a
compact, inexpensive modulator
that will convert any video
source to VHF for viewing on
your TV on either channel 3 or 4.
Its low signal loss enables it to
deliver excellent picture and
sound quality. The MINI allows
you to connect additional A/V
components, such as a DVD
player or a gaming system, to your TV when there are
no available RCA jacks. It is the optimum modulator
for anyone looking to extend the functionality of any
TV without sacrificing space, price or ease of
installation. Most common A/V devices are gaming
systems and DVD players that take up space around
your TV. It features automatic signal detection and
automatically switches between A/V sources when a
signal is detected.
Order #
33-9645
Mfr. #
MINI
(ea.)
$13.95
RF Modulator
The VS4 MOD+ makes it easy makes it
easy to connect up to four video components to your
television. This modulator and switcher in one
combines extensive functionality with superior
quality. The VS4 MOD+ lets you connect up to four
components to a single TV input with the flexibility to
switch between antenna/cable and video sources. The
TERK VS4 MOD+ lets you get the most out of your
home TV. It easy converts up to four A/V sources to
VHF for viewing. It also lets you select and power
your A/V source using your existing remote control
using the VS4 MOD+ learning remote functionality. In
addition the VS4 was designed using S-video jacks to
ensure that you’ll always receive the clearest
picture possible.
Order #
33-9650
Mfr. #
VS4-MOD+
(ea.)
$27.95
Stereo
Convertor
Convert
virtually any
make of mono
modulator to
stereo. 5601 goes between the audio source and the
current modulator. Features: 20dB of separation,
dbx noise reduction, Dolby Pro Logic compatible.
Order #
5601-01
(1-4)
$170.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
277
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C51 pg 278
7/31/06
10:08 AM
Page 278
SATV/CATV
Digital UHF Modulator
Section 14
SLV A/V RF Modulator
The mini RF modulator
Front
is a compact, inexpensive
modulator that will
convert any composite
video source to VHF for
viewing on your TV on either channel 3 or 4.
Back
Its low signal loss enables it to deliver excellent
picture and sound quality. This modulator allows you
to connect additional A/V components, such as a DVD
player or a gaming system, to your TV when there
are no available RCA jacks. Inputs: Three RCA
(composite video and stereo audio), one “F”
Order#
33-9775
(1-5)
$9.95
(6-up)
$9.53
Video RF
Modulator
•Lets you
Front
connect DVD,
VCR, selected
video games
and satellite
receivers to
older TVs’
Back
antenna/cable
inputs or to TVs
without audio/video inputs •Channel 3/4 selectable
(1-9)
$11.69
14
Order #
M61138
The USM-8D is a low cost,
frequency stable, UHF
modulator developed for
use in adding satellite,
VCR, or security video
channels to an existing
home distribution system.
The frequency adjustable feature allows
multiple channel use at an extremely low cost.
Specifications: •Frequency range: UHF channels
14~69 and CATV channels 65~139 •Video input:
Composite •Output impedance: 75ohm •Output
level: 7dBmV •Power input: 115VAC, 60Hz, 5W
•Connectors: “F” for RF, RCA video and audio
•Mfr. #USM-8D
Order #
33-2740
(1-9)
$45.95
(10-up)
$42.49
Auto Switching
RF Modulator
Connect your DVD or Sony
Playstation to your
television for operation on
channels 3 or 4. Automatic
switching senses if DVD or Playstation is on and
automatically switches from cable TV, DSS or off air
antenna to the game or DVD. Modulator includes
audio video cable and RF cable.
Order #
33-7030
(ea.)
$24.95
(2-up)
$23.65
Accepts video and audio
from a camera, VCR or
any other video device and
modulates to television
channel 3 or 4. Built-in
selector switch to choose between A/V source and
antenna or cable TV.
(ea.)
$25.45
Digital RF
Modulator
Caller TV™
Order #
82-6845
Mfr. #
CTV1
Description
Single line
(ea.)
$57.00
This three channel digital modulator
is only 3.9" (L) x 5.5" (W) x 0.9" (H)
and weighs only 8.7 ounces. It is the
perfect modulator for security
installations, discreet monitoring, or single channel
satellite and audio/video applications. Easily allows
you to use cameras to see approaching visitors
or intruders at your home, business or apartment
on a standard TV or cable TV channel. Use this
modulator to distribute your VCR, Laserdisc, DSS
or cable box throughout your home. Mfr. #MM73.
Order #
82-2740
(ea.)
$174.00
Front
RF Modulator
w/Antenna Switch
Order #
82-8100
Caller-TV places Caller-ID
information at the bottom of the television screen in
large easy to read letters. It uses an RCA video input
and output to display over any satellite, VCR, DVD,
laserdisc, video game or video camera signal for 10~15
seconds. Even without a video source, Caller-TV
makes its own blue screen with white ID information
which is retained until the next call is received.
Caller-TV requires activated Caller-ID service from
the local phone company. Specifications: Power:
12VDC, 100mA. Connection: Telephone: Two RJ-11
jacks. Video in/out: RCA type jacks, composite video.
Triple Play™
Accepts video
and audio from
a camera, VCR
or any other
video device.
Digital channel selection for UHF channels 14~69
or CATV channels 66~134. Antenna/CATV
input and built-in combiner. •Frequency range:
471.25MHz ~ 855.25MHz •Antenna input
frequency: 50MHz~900MHz
•Automatic gain control
Order #
82-8105
Back
RF Modulator and Video Switcher
•Lets you connect components with S-video or
composite output (DVD, satellite) to a TV without
A/V jacks, by modulating the signal to RF •Ideal for
hooking up several components to a TV •Combines
RF modulator and S-video switcher into one unit
•Converts any input (S-video, composite, A/V, stereo)
to RF output •A/V and S-video switching •Composite
to S-video convertor •Front input, stereo input •Gold
plated connectors
Order #
CRF940
(ea.)
$25.95
(ea.)
$79.99
#33-8745
Channel Combiners
•Combines channel 3/4 signal
(from VCR, computer, game, etc.)
with existing VHF signals not
including channel 3/4 •Also
removes bleedover of channel 3/4
modulated signal from adjacent
channels 2 and 4
Order #
33-255
33-1080
Combiner
3
4
(1-9)
$17.68
17.68
Broadband Distribution Amps
(10-up)
$17.17
17.17
NET 30
Terms
278
Order Online
www.mcminone.com
#33-8760
For broadband applications up to 1GHz including
cable television and digital television. Suitable
for medium sized distribution networks including
homes and small condominium complexes. High
gain low noise amplifier with built–in FM trap.
Specifications: Frequency range 40~1000MHz.
FM trap -20dB. Power: 120VAC.
Order # Outputs
33-8745
1
33-8755
2
33-8760
4
Gain
36dB
15dB
11dB
Gain Adjust
(1-9) (10-up)
18dB
$29.99 $26.74
10dB
25.99 24.60
–
24.99 23.53
C51 pg 279
7/31/06
10:09 AM
Page 279
SATV/CATV
#2131
#2132
Point–To–Point S-Video Distribution System
ChannelPlus now offers video and audio distribution
with full IR control over CAT 5 with the new SVC-10.
The SVC-10 can send S–video or composite video
with either digital or analog audio to any room up
to 1000' away. The new SVC-10 is designed for CAT
5 or 5E structured wire installations. The SVC-10 is
compatible with both NTSC and PAL video standards.
The two–piece SVC-10 system consist of a rack
mountable transmitter with inputs for S-video,
composite video, digital and analog audio along
with an IR emitter jack and RJ-45 output connector.
Each input has auto termination loop–through for
connecting a local video/audio system. The miniature
in–room receiver has one RJ-45 input and one each
S-video, composite video, digital and analog audio
outputs along with a 12 volt IR target input jack.
Features include: Auto termination loop through,
19" rack mountable (one space) and automatic
optical to coax digital audio conversion.
Order #
SVC-10
SVC-10R
SVD-8
Description
System
Receiver only
Eight output distribution panel
(ea.)
$179.95
72.00
220.00
The All–In–Two Multi–Room RF distribution kit
includes all of the components needed to distribute
broadband RF, four locally generated signals to eight
TVs and IR remote control to three rooms in a
house. The kits include: 4 channel RF modulator
(5545), 3–input/8–output RF distribution panel
(DA-8200HHR or DA-8200BID), three rooms of IR
interface, expandable to eight rooms (2133) and IR
control of two video devices (two 2172).
Order #
5558BID
5558HHR
Description
Bi–directional amplifier
High head–room amplifier
(kit)
$500.00
500.00
Whole House
Distribution System
Accepts A/V signals from video
sources like satellite, VCR and laser
disk and modulates to a user selected
channel for viewing throughout the house on an
unused UHF channel or cable TV VHF channel.
Each model accepts, amplifies, and distributes
broadband CATV or off air antenna to all TVs. The
#3025 allows IR control of video products from any
TV location using optional repeaters. Model #3025
has two A/V inputs and five outputs. Model #3015
has one A/V input and four outputs.
Order #
3015
3025
Modulator CH Output
14~69U, 65~125V
14~64U, 99~125V
(ea.)
$51.75
119.00
#2174
#2172
High Headroom
Distribution
Amplifiers
#2171
Whole House Infrared
Remote Control
Control any infrared controllable
video or audio product from any TV
location in the house. The infrared
codes are picked up by a target and
transmitted through the homes coax
cable and instantly repeated by each
repeater/emitter. A 2100A interface
is used at any location a target or
emitter is used and the 2100 Series
#2100A
has numerous emitters and target
configurations. All components are powered
centrally from the coaxial cable panel, there
is no need for any additional power or wires.
Order #
2100A
Targets
2130A
2131
2132
2133
Emitters
2171
2172
2173
2174
Description
In-wall interface with RF output
(ea.)
$35.00
IR remote mini-target
IR remote in-wall target
IR remote set-top target
IR target with coax input
68.50
52.50
40.00
40.00
Single IR emitter
Dual IR emitter
IR repeater/emitter
IR expansion block
10.00
12.00
6.50
28.00
RF Distribution
Amplifier
For systems with
up to eight TV
outlets and cable
lengths up to 150'.
The DA-8200
series provides
outputs to eight
televisions, three
inputs from an
off–air antenna or CATV and two modulator
locations. The compact design feature ensures a
quick installation for surface mount application
or in a structured wire enclosure like the 2619. The
DA-8200 series may be remotely powered from up
to 75' away by using a remote wall plate model
2010 or any 5500 series or SVM series modulator.
The DA-8200 series offers optional IR control
of connected video sources and whole house IR
integration with a 5V IR engine. The easy to
use 2133 target connects directly to the coax run
of any room and allows IR signals to be routed to
either a 2010 wall plate, 5500 series or SVM series
modulator. The DA-8200BID offers a 5~42MHz
return path for bi–directional communication for
use with digital cable interactive set–top boxes.
The DA-8200HHR is used with high performance
antenna applications for off–air digital and
NTSC signals.
Order #
Description
DA-8200BID Bi–directional amplifier
DA-8200HHR High head–room amplifier
(ea.)
$159.30
159.30
T2’s industry-leading,
low-noise amplifiers
ensure high-quality
RF signals in any
installation. The
internal push/pull
design assures crisp,
clear pictures on
every TV. They feature
high-performance,
high-headroom internal
circuitry and adjustable
gain and tilt. T2 amplifiers also feature a switchable,
bidirectional return path, making them compatible
with both terrestrial and cable environments
Specifications: •Maximum gain: 20dB •Gain
adjustment range: 0dB~20dB •Forward bandwidth:
54MHz~1000MHz •Reverse bandwidth:
5MHz~42MHz •Flatness: 1.7dB maximum
•Maximum output @ 36 channels operating 42dB
•Tilt compensation range: Flat to -12dB @ 54MHz
•Noise figure 3dB typical, 4.8dB maximum
Order #
33-10135
33-10140
Mfr. #
AP-20
AP-35
Gain
20dB
35dB
(1-9)
$219.00
369.00
(10-up)
$186.15
313.65
14
All–In–Two Multi–Room RF Distribution Kit
Section 14
#2130A
#DA-550BID
High Headroom
Distribution Amplifier
The DA-550 series is
designed with the highest
headroom available in
a distribution amplifier.
Traditional panels are
not designed to handle the
radical variations in signal
strengths that have come
about with HDTV. New
technologies such as HDTV
create special problems for
current video distribution
panels. The DA-550s can
handle an extremely wide
#DA-550HHR
range of input signals from
today’s NTSC and tomorrow’s digital TV. With
outputs to eight televisions, coax runs up to 150',
three inputs, one from a CATV or antenna and
two from modulators, the DA-550 is the heart of a
multi-room distribution system. The DA-550BID
offers a 5~42MHz return path for bi-directional
communication for use with cable modems and
pay-per-view applications. The DA-550HHR is used
with high performance antenna applications for off air
digital and NTSC signals. Additional features: IR
engine, remote power and expandable outputs.
Order #
DA-550BID
DA-550HHR
(ea.)
$159.30
159.30
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
279
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C51 pg 280
7/31/06
10:10 AM
Page 280
SATV/CATV
50MHz~1GHz
Broadband
Amplifier
Section 14
UHF-VHF-FM
Distribution Amplifier
DA-500A
The DA-500A amplifier is
ideal for residential cable
systems or as an antenna
pre–amplifier. The
DA-500A offers a more
robust power supply and greater EMI rejection.
Specifications: Bandwidth: 40MHz~1GHz.
Gain: 18dB +/- 1dB.
Order #
DA-500A
(ea.)
$60.00
The TA-52 is a 52dB gain UHF/VHF/FM broadband
distribution amplifier designed to function as a
reliable, key component in medium and large MATV
systems. Signal control is provided through front
panel design. UHF/VHF input may be combined or
separated by use of a single throw switch. Low band
VHF, high band VHF and UHF frequencies have
separate gain controls and switchable 10dB input
attenuators. Features include switchable FM trap
and backmatch -20dB test point. Specifications:
•Bandwidth: Low band: 54~108MHz, High band:
174~216MHz, UHF: 470~806MHz •Gain minimum:
48dB •Output capability: 60dBmV (3 channels)
•Input attenuators: 10dB •Impedance, input and
output: 75ohm •Power requirements:
115VAC, 60Hz, 25W
Order #
33-2680
DA-506BID
14
The DA-506BID distribution
panel creates an ideal entry
level product for broadband
distribution. Encased in an
extruded aluminum shell, the DA-506BID meets the
needs of small distribution systems which do not
require IR control or modulator inputs. The
DA-506BID has one input for CATV or off–air
antenna and six outputs. Four outputs are for
up to 75' and two are for 150'. Additionally, the
DA-506BID has bi–directional capabilities using a
5~42MHz return path on the CATV input allowing
for compatibility with cable modem and interactive
set–top boxes. Specifications: Bandwidth
54~806MHz. Gain: 20dB +/- 1dB.
Order #
DA-506BID
(1-9)
$199.00
(10-up)
$192.00
Bi–Directional
Apartment
Amplifier
High gain, high
output amplifier
for multi–user
systems.
Compact
aluminum housing for indoor use. Inputs and
outputs protected against voltage surges.
Power–doubling hybrid amplifier produces very
low internal noise or distortion making it ideal for
two–way CATV distribution. Specifications:
Bandwidth 57~860MHz. Gain: 30dB. Noise figure:
<8dB. Power: 120VAC.
Order #
33-8705
(1-9)
$129.00
Order #
NF64-70
(ea.)
$25.00
The CA-30 is
a high quality
push-pull
amplifier
producing
signals with extremely low distortion and harmonic
content. The CA-30 enclosure uses a black anodized
aluminum extrusion to assure reliable heat sinking
and corrosion resistance. Features: Wide frequency
range: 54MHz~550MHz, 30dB gain, adjustable
slope control, adjustable gain control, input and
output test points, designed for CATV apartment
distribution systems Specifications: •Bandwidth:
54~550MHz •Gain: 30dB •Gain adjust range:
0~8dB •Power requirements: 115VAC, 60Hz, 4W
•Slope: 0~8dB variable •Noise figure: CA-30, 5.0dB
Order #
33-2670
(1-9)
$149.00
(10-up)
$144.00
Low Pass Filters
A ChannelPlus low pass
filter is used on systems
when the broadband feed is supplied by a CATV
service. The filter removes all CATV channels
above the pass band, allowing insertion of locally
generated channels. In addition, the filters remove
cable system noise which degrades the picture
quality of the locally generated channels.
Order #
LPF-380
LPF-470
LPF-600
LPF-750
Pass Band (MHz)
40~380MHz
40~470MHz
40~600MHz
40~750MHz
(ea.)
$19.00
20.00
30.00
30.00
NET 30
Terms
280
Order Online
www.mcminone.com
(1-9)
$149.00
(10-up)
$144.00
UHF/VHF/FM
36dB
Features:
•Low noise
•Two
switchable FM
traps •Separate
gain controls •AC power indicator •50dB output
capability •-20dB monitor output •Fuse protected
Specifications: •Bandwidth: 54MHz~108MHz,
174MHz~216MHz, 470MHz~812MHz •Gain: VHF,
31dB; UHF, 36dB •75ohm input/output •Power
requirements: 115VAC; 60Hz •Dimensions: 83⁄4" (L) x
17⁄8" (H) x 33⁄4" (D) •Fuse protected
Order #
33-0890
(1-9)
$99.99
(10-up)
$97.34
UHF/VHF/FM
12dB
Push-Pull
Amplifiers
The NF64-70 notch
filter is designed to
eliminate television
channels 64 through 70 thus allowing a clean section
of the cable to insert locally generated signals. The
center of the notch is channel 67 at -55dB.
Order #
33-2675
(10-up)
$123.81
(ea.)
$67.45
Notch Filter
The PDATM 30 is a
low noise linear
distribution amplifier
providing high power
outputs at extremely
low distortion. The wide bandwidth allows the
user a single amplifier for all distribution frequency
applications; VHF, mid band, super band, hyper
band, ultra band and UHF. Features: •Wide
forward frequency range: 50MHz~1GHz, low noise
figure, 30dB gain to 1GHz, surface mount strip line
design, designed for all broadband systems, built-in
slope (44dB typical, 55MHz~1GHz) Specifications:
•Bandwidth: 50MHz~1GHz •Forward gain:
50MHz~600MHz, 31dB, ± 2dB, 600MHz~1GHz,
32dB, ± 3dB •Power requirements: 115VAC, 60Hz
Tilt Compensator
Coaxial cable attenuates
high frequencies more
than low frequencies.
This problem is most
severe when cascading amplifiers one after another.
The signal differences are amplified to a point where
the higher frequency signals are so small compared
to the low frequency signals that they can no longer
be received. The TC-200 creates an attenuation loss
equal and opposite to cable loss. Provides a balanced
signal level by compensating for the high frequency
attenuation and allowing all signal levels on all
channels to be of equal amplitude at distant
locations, maintaining the picture quality on
higher channels.
Order #
TC-200
(ea.)
$11.23
Features: •Low
noise •Lightning
protection •AC
power indicator •Two outputs •Low cost
Specifications: •Bandwidth: 54~890MHz •Gain:
VHF, 12dB; UHF, 11dB •Maximum input: VHF,
35dB; UHF, 25dB •Maximum output: VHF, 47dB;
UHF, 38dB •Noise figure: VHF, 6dB; UHF, 7dB
•Power requirements: 115VAC; 60Hz •Dimensions:
57⁄8" (W) x 15⁄8" (H) x 3" (D)
Order #
33-0445
(1-9)
$36.31
(10-up)
$23.67
Multi–Set
Indoor
Distribution
Amplifiers
Model 3042
is ideal for
amplifying a weak
antenna or cable signal. Models 3043, 3044, 3045
allows distribution of amplified signals to 2, 4 or 8
television sets or other video equipment without the
use of additional splitters.
Order #
33-8970
33-8975
33-8980
33-8985
Mfr. #
3042
3043
3044
3045
Description
1 output
2 output
4 output
8 output
Gain
13dB
22dB
22dB
22dB
(ea.)
$37.47
41.91
46.77
73.71
C51 pg 281
7/31/06
10:11 AM
Page 281
SATV/CATV
A
Section 14
RF Amplifiers
Fig.
A
B
C
Order #
33-8715
33-8720
33-8725
Outputs
1
2
4
VHF/UHF/FM signal amplifiers for residential cable
and antenna television. 40~862MHz bandwidth.
<6dB noise figure. Operates on 120VAC.
Gain
30dB
25dB
20dB
(1-9)
$12.95
13.95
15.95
(10-up)
$12.43
13.47
15.37
(1-9)
$29.99
(10-up)
$28.32
Order #
33-8730
33-8735
33-8740
Outputs
1
2
4
Features: •Low
noise •High
overload capacity
•Lightning
protection at RF
input •Heavy gauge
metal case •On-off indicator light •Switchable FM
trap Specifications: •Bandwidth (MHz): VHF
54~300; UHF 470~890 •Gain: VHF, 25dB; UHF,
23dB •Maximum input (dBmV): •VHF, 15; UHF, 17
•Maximum output (dBmV): VHF, 40; UHF, 40 •Noise
figure (dB): VHF, low 5.4, high, 6.2; UHF, 14 •Power
requirements: 117VAC •Dimensions: 65⁄8" (W) x
17⁄16" (H) x 33⁄32" (D)
(1-9)
$24.95
(10-up)
$23.64
UHF/VHF/FM 12dB
Features: •Low noise
•High overload capacity
•Lightning protection
•Heavy gauge metal
case •On-off indicator
light Specifications:
•Bandwidth (MHz): VHF 54~216; UHF 470~890
•Gain: VHF, 12dB; UHF, 10dB •Noise figure (dB):
VHF, 6; UHF, 7.7 •Input capability (dBmV): 40
(100mV), 20 (10mV) •Input: 75ohm •Output: 75ohm
•Power requirements: 117VAC; 60Hz •Dimensions:
65⁄8" (W) x 17⁄16" (H) x 33⁄32" (D)
(1-9)
$20.95
(10-up)
$19.24
Gain
10dB
10dB
5dB
(1-9)
$8.31
10.39
10.91
(10-up)
$7.27
9.63
10.17
VHF/FM 20dB Amplifier
•50~450MHz bandwidth
•20dB gain •40dB output
capability •117VAC power
requirement •Dimensions:
31⁄2" (W) x 21⁄4" (H) x 11⁄2" (D)
(1-9)
$20.95
(10-up)
$20.07
VHF/FM 10dB
Amplifier
(1-9)
$13.95
Cable ready, stereo
television tuner
perfect for home
theater and
multimedia
applications. 181
channel tuner works
with off air antennas
or cable television,
exactly the same as a
cable ready television.
Features include MTS
stereo, SAP tuning,
program scan, channel
add/erase, fine tune
and on–screen display.
Specifications: Input voltage: 6VDC with supplied
adaptor, RF input: 75ohm RCA type connector with
“F” to RCA adaptor included. Video output: 1V p-p,
75ohm via RCA type connector. Audio output: Stereo
audio via two RCA type connectors.
Order #
33-6891
•50~300MHz
bandwidth •10dB
gain •30dB output
capability •117VAC
power requirement
•Dimensions: 31⁄2" (W) x 21⁄4" (H) x 11⁄2" (D)
Order #
33-260
Television Tuner
(ea.)
$93.59
(2-up)
$85.68
(10-up)
$12.31
Four-Way
Amplified Coupler
•50MHz~550MHz
bandwidth •1~3dB gain
•117VAC power required
•One input, four outputs
•Dimensions: 31⁄2" (W) x
21⁄4" (H) x 11⁄2" (D)
Order #
33-1475
(1-9)
$12.50
A/V Television Convertor
(10-up)
$11.82
Two-Way Amplified Coupler
•50MHz~550MHz
bandwidth •4~6dB gain
•117VAC power required
•One input, two outputs
•Dimensions: 31⁄2" (W) x 21⁄4"
(H) x 11⁄2" (D)
Order #
33-1460
(1-9)
$13.95
(10-up)
$12.35
Order #
33-2070
33-2070R
Description
Convertor
Replacement remote
(ea.)
$69.95
9.99
(2-up)
$65.95
-
15dB Amplifier
ZTA-25
Specifications: RF:
•Frequency range:
470~890MHz •Input level
min: -8.5dB •Input level
max: +22dB •Gain:
25dB(LB/FM), 22dB(HB),
18dB(UHF) •Noise figure: 5.0dB(VHF), 7.0dB(UHF)
•Output level max: +47dBmV •FM trap depth
(95~108MHz): -25 •Impedance all ports: 75ohm
General: •Power requirements: Voltage: 117VAC,
±10% •Frequency: 60Hz •Power: 3.0W •Mfr. #ZTA-25
Order #
33-2855
The A/V television convertor receives both broadcast
and cable TV signals (UHF/VHF/CATV) from
54~806MHz. The A/V television convertor provides
output on channel 3 as well as separate video and left
and right (monaural) audio with volume control.
These features make the A/V television convertor
ideal for home theater installations to take full
advantage of your equipment. Other features
include: STD/HRC/IRC selector switch, sleep timer,
AC output to control TV, 155 channel memory and
fine tune control. Remote control operates on
two “AA” batteries (#292-015).
(1-9)
$26.01
(10-up)
$24.71
Specifications: RF:
•Frequency range:
54~220MHz,
470~900MHz •Input
level min: -7.0dB
•Input level-max:
+18dB •Gain: 16dB
(50~22), 12dB (470~800), 10dB (800~900) •Noise
figure: 3.0dB (VHF), 4.0dB (UHF) •Output level max:
+44dBmV •Impedance all ports: 75ohm General:
•Power requirements: •Voltage: 117VAC, ±10%
•Frequency: 60Hz •Power: 4.2W •Mfr. #ZTA-15
Order #
33-2850
(1-9)
$16.95
(10-up)
$16.43
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
281
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
UHF/VHF/FM 25dB
Order #
33-280
Fig.
A
B
C
Order #
33-270
Features: •Low
noise •Lightning
protection •AC
power indicator
•Switchable FM trap •Low cost Specifications:
•Bandwidth: 54~900MHz •Gain: VHF, 25dB; UHF,
22dB •Maximum input: VHF, 18dB; UHF, 16dB
•Maximum output: 40dB (54~800MHz) •Noise
figure: VHF, 5dB; UHF, 7dB •75ohm input/output
•Power requirements: 115VAC; 60Hz •Dimensions:
57⁄8" (W) x 15⁄8" (H) x 3" (D)
Order #
33-290
C
RF Amplifiers
UHF/VHF/FM
25dB Amplifier
Order #
33-0450
B
A
Low noise VHF/UHF/FM
B
signal amplifiers.
Variable gain control
–10dB. Built–in FM trap
(-20dB). Specifications:
Frequency range:
40~862MHz. Noise
figure: <7dB.
C
Power: 120VAC.
C51 pg 282
7/31/06
10:12 AM
Page 282
SATV/CATV
#33-2840
Section 14
Broadband Amplifiers
Broadband Distribution
Amplifiers
The ZCM Series includes
professional quality,
broadband distribution
amplifiers, designed
#33-2845
for special purpose
applications in the
MATV, SMATV, private and wireless cable markets.
These amplifiers cover the 50~550MHz frequency
range and provide low noise amplification at a
reasonable cost. Two models are available with
either 10 or 20dB of gain, each capable of accepting a
relatively high input level. Specifications: ZCM-101
RF: •Frequency range: 50~550MHz •Gain: 10dB
•Noise figure: 3.5dB •Impedance-all ports: 75ohm
General power requirements: •Voltage: 117VAC,
±10% •Frequency: 60Hz •Power: 1.2W •Connectors
(top panel): •RF input: Type “F”, female RF output:
Type “F”, female ZCM-201 RF: •Frequency range:
50~550MHz •Gain: 20dB •Noise figure: 3.5dB
•Impedance all ports: 75ohm General power
requirements: •Voltage: 117VAC, ±10% •Frequency:
60Hz •Power: 1.4W •Controls (top panel): Tilt: Var.
Control •Connectors (top panel): RF Input: Type “F”,
female •RF output: type “F”, female
14
Order #
33-2840
33-2845
Mfr. #
ZCM-101
ZCM-201
(1-9)
$14.95
21.50
(10-up)
$14.68
20.81
The BIDA Series are professional quality, broadband, two-way capable, indoor hybrid
distribution amplifiers that are designed for RF distribution systems, such as apartment complexes, hospitals,
schools, prisons, hotels, and a wide variety of similar applications. The BIDA Series is ideal for multi-channel
RF distribution systems whose input source is a “cable drop” or the output of a MATV/SMATV/CATV headend.
Additionally, the BIDA Series may be used as the launch amplifier in a distribution network. These amplifiers
use dual push–pull hybrid modules, capable of delivering high output levels with low
distortion, even in systems with over 100 channels of programming. Power doubling
models can be cascaded together with lower distortion resulting than the push–pull
amplifiers allowing the system to maintain higher signal integrity. The gain and slope
controls are designed between the hybrid modules for optimum noise figure, input return
loss and output capability. Test ports for both the input and output are provided for
testing signal levels without interrupting service. The BIDA Series come in a rugged,
aluminum chassis that provides exceptional heat dissipation. This allows the BIDA
Series to be operated at high
Bandwidth Gain
ambient temperatures with no
Order #
MHz
dB
Description
(ea.)
degradation of performance or
reliability. The combination
33-7815
49~550
50
Push–pull
$559.00
of features and durable
33-7820
49~750
32
Push–pull
589.00
construction ensures that the
33-7850
49~860
44
Push–pull
679.00
BIDA Series will provide years
33-7855
49~860
44
Power doubling
749.00
of reliable, trouble-free service.
Broadband Distribution Amplifiers
The ZTA Series are broadband distribution amplifiers designed for special purpose applications in the MATV, SMATV, private and
wireless cable markets. These amplifiers provide high output and low noise amplification at a reasonable cost. Several models
are available for VHF, FM, and UHF signal reception. The ZTA Series products are available with a number of gain levels so that a
unit can be selected to fit most systems. The amplifiers come with a variety of features, including separate VHF and UHF antenna
inputs, FM traps, and individual gain controls for VHF and UHF. The combination of split band amplification and low noise input
circuitry results in a wide dynamic range and exceptional output capability. The ZTA Series products are UL and CSA approved
and all models come with lightning and surge protected power supplies, thereby ensuring years of reliable operation.
Multiple Dwelling
Amplifier
This
professional
quality, broadband,
indoor hybrid distribution
amplifier is designed for RF
distribution systems, such as apartment complexes,
hospitals, schools, prisons, and hotels. It is ideal for
those RF distribution systems whose input source is a
cable drop, the output of a MATV/SMATV headend, or
the output of a small CATV headend. The ACA 30-550
amplifier has a flat 30dB of operational gain, which is
variable using a built-in gain control. Variable slope
control is also provided, with an available range of
9dB. This amplifier uses a push-pull technology,
capable of delivering high output levels with low
distortion, even in systems with 110 channels of
programming. It is housed in a compact, aluminum
chassis that provides excellent heat dissipation,
allowing the ACA 30-550 to be operated at high
ambient temperatures with no degradation of
performance or reliability. The ACA 30-550 is provided
with an external power transformer for use with
117VAC power. The unit can also be powered directly
with 24VAC. The superior design guarantees long
service at an affordable price. This high performance
hybrid amplifier is the obvious selection when cost
and performance parameters are extremely tight.
Specifications: RF: •Frequency range: 47~550MHz
•Gain: 32dB •Noise figure(a): 8.0dB •Output level:
+44dBmV •Gain control range: 15dB •Slope control
range: 10dB •Impedance all ports: 75ohm General:
•Power requirements: •Voltage(d): 117VAC, ±10%, 24
•Frequency: 60Hz Power: 13W •Mfr. #ACA 30-550
Order #
33-2875
(ea.)
$263.00
NET 30
Terms
282
Order Online
www.mcminone.com
ZTA-35
ZTA-45
Specifications: RF: •Frequency range:
54~216MHz, 470~806MHz •Input level min:
-7.0dB(LB/FM), -6.0dB(HB), -6.8dB(UHF)
•Input level max: +14dB, 36dB(LB/FM), 35dB(HB),
37dB(UHF) •Noise figure: 6.0dB(LB/FM), 7.0dB(HB),
6.2dB(UHF) •Output level max: 49dBmV •Gain
control range: 18dB FM trap depth (95~108MHz):
-18 •Impedance all ports: 75ohm General: •Power
requirements: Voltage: 117VAC, ±10% •Frequency:
60Hz •Power: 15.0W •Mfr .#ZTA-45
Order #
33-2865
(ea.)
$226.00
Specifications: RF: •Frequency range:
54~216MHz, 470~806MHz •Input level min:
-7.0dB(LB/FM), -6.0dB(HB), -6.8dB(UHF) •Input level
max: +14dB, 36dB(LB/FM), 35dB(HB), 37dB(UHF)
•Noise figure: 6.0dB(LB/FM), 7.0dB(HB), 6.2dB(UHF)
•Output level max: 49dBmV •Gain control range:
18dB •FM trap depth (95~108MHz): -18 •Impedance
all ports: 75ohm General: •Power requirements:
Voltage: 117VAC, ±10% •Frequency: 60Hz •Power:
15.0W •Mfr. #ZTA-35
Order #
33-2860
(ea.)
$139.99
Antenna Preamplifiers
Superior performance rated, mast mounted
preamplifiers for any home installation requirement.
Featuring modern design, a high impact
polypropylene case and simplified mounting.
Compact indoor transformer and Power Adder are
included with all models. Available to meet any
amplification requirement. Note: All amplifiers
operate on VHF LB, VHF HB and UHF. Individually
packaged in display boxes.
Order #
30-1135
Mfr. #
5120
30-1140
5123
30-1155
5124
Description
All channel amplifier.
Single 300ohm UHF/VHF
antenna input. 300ohm output.
All channel amplifier.
300ohm UHF/VHF antenna
input. 75ohm output.
All channel amplifier. Separate
300ohm UHF and VHF antenna
inputs. 75ohm output.
Amplifier
Gain
Ch.
dB
2~13
14
14~69
19
70~83
18
2~13
15
14~69
19
70~83
18
2~13
15
14~69
20
70~83
19
Noise
Figure
Ch.
2~13
14~69
70~83
2~13
14~69
70~83
2~13
14~69
70~83
dB
5.0
3.5
5.2
5.0
4.0
4.9
5.0
3.5
4.7
(ea.)
$71.70
72.95
70.65
C51 pg 283
7/31/06
10:13 AM
Page 283
CATV Security Tool
Order #
33-0025
33-0030
#33-915
Section 14
Description
Security tool
Security sleeve
(ea.)
$6.69
0.49
Isolation Transformer
Ground loops in
cable television,
antenna and
satellite systems can cause video noise such as
herringbone and beat. The ground loop isolator
easily connects between a signal source and an
antenna input, such as a local reception antenna and
a satellite receiver breaking the ground loop.
Order #
33-6925
SATV/CATV
#33-917
#33-910
•Precision
machined,
high-quality security
tool for connecting
and disconnecting
cables protected by
a security sleeve
•Long shaft fits all
types of sleeves
(ea.)
$19.95
(2-up)
$18.49
In-Line Amplifiers
Specifications: •Bandwidth:
5~950MHz •Gain: 11dB
•Maximum input: 20dB
•Maximum output: 31dB
•Noise figure: 4dB •Power
requirements: 15VDC •Dimensions: 21⁄2" (L) x 5⁄8"
(dia) #33-910 DC Passive: For satellite 70MHz
in-line amplification when power dividers, low gain
LNAs and down convertors require additional gain.
#33-917 Non-Passive: For MATV/CATV
applications when antenna preamplification and
line amplification is required. #33-915 Power
Supply: Provides power supply (15VDC) and
diplexer for #33-917 and 33-910.
Order #
33-917
33-910
33-915
Type
Non-Passive Amp
DC Passive Amp
Power Supply
(1-9)
$12.95
13.95
10.51
(10-up)
$11.41
11.93
9.81
Ground Isolation
Transformer
5MHz~2.4GHz
bandwidth for use
in antenna, cable
television and satellite systems. Reduces the
effects of ground loops such as herringbone,
beat and audio hum.
Order #
33-8700
(1-9)
$17.95
Compatible with
the market leader
of structured
wiring panels, these
5~1000MHz, DOCSIS®
compliant amplifier modules are the ideal drop-in
replacement for CATV in-home signal distribution.
Improve your multimedia application with the
latest broadband technology for HDTV QAM signals.
Features include a durable, salt-spray-resistant
housing, weather-sealed “F” ports, and exceptional
surge performance.
Order #
33-10225
33-10226
In-Line Amplifier
(10-up)
$15.40
Broadband Structured
Wire RF Amplifiers
Description
6 Output
8 Output
Gain
+6.5dB gain
+10.0dB gain
(ea.)
$79.95
89.95
DC line powered
amplifier for CATV or
antenna applications. Bandwidth is 5~950MHz.
Gain is 10dB. Use with #33-915 power supply.
Order #
33-2690
(1-9)
$6.96
(10-up)
$6.44
A
B
Voltage Blocking Coupler
•Blocks DC and low
frequency AC power •Solid
brass body with nickel
plating •Female to male
fittings •22 gauge spring
steel center pin
•1~1000MHz bandwidth
•16dB return loss •0.3dB insertion loss
(1-9)
$2.51
Indoor/Outdoor
In–Line Amplifier
(10-up)
$2.17
75ohm TV
Interference Filters
•Used in
cable or antenna
systems to remove
interference affecting
picture quality
Order #
33-0070
Order #
33-7220
(1-9)
$2.79
(10-99)
$2.41
Features: Die-cast
housing, low noise:
4dB, high gain: 20dB,
passes DC through for
powering LNBs, sloped
gain for long cable runs, voltage supplied by the
satellite receiver Specifications: •Noise figure: 4dB
•Gain: 950MHz: 15dB, 1450MHz: 18dB, 1750MHz:
20dB, 2150MHz: 21dB •Maximum output: 30dBmV
(12 channels) •DC voltage: 15~18VDC (negative
ground) •Connectors: “F” type
(1-9)
$13.64
(10-up)
$10.66
In–Line
Satellite Amplifier
Ideal for long cable
runs. 20dB gain. Die
cast housing. Powered
by satellite control voltage.
Order #
33-8645
(1-9)
$3.11
Mfr. #
BIA-20BP
(ea.)
$17.95
(100-up)
$1.89
In-Line 950~2150MHz Amplifier
Order #
33-2720
Amplifies satellite and
terrestrial signals to
compensate for splitters and long cable runs. TERK
amplifiers are designed for optimum performance in
TV and satellite. Lesser quality amplifiers do not
offer extended bandwidth and gain flatness resulting
in poor picture quality. High quality die–cast
aluminum housing. Specifications: Frequency
range: 54~2150MHz. Slope compensation gain: 11dB
@ 54MHz, 20dB @ 2150MHz. Noise figure: <5dB.
Input/output impedance: 75ohm.
(10-up)
$2.67
DA-520A
The DA-520A is a
bi–directional amplifier
providing 20dB of forward
gain and 0dB reverse gain. Specifications:
Bandwidth: 54~806MHz. Gain: 20dB +/- 1dB.
Order #
DA-520A
(ea.)
$67.99
Fig. Order # Forward Gain Reverse Gain (1-9) (10-up)
A
33-7110
15dB
0dB (Flat) $44.95 $41.15
B
33-7115
15dB
15dB
59.95 55.56
Satellite Line
Amplifiers
The 5113IFD is a general purpose, low cost satellite
IF (950~2050MHz) line amplifier with 14dB gain
at 1450MHz and appropriate gain between 950 and
2050MHz to give cable slope compensation. Typical
applications include: Long runs of coaxial cable
(greater than 100') from satellite receiver to LNB,
satellite IF distribution system where signal levels
may have become marginal towards the end of the
system, splitting a signal many ways which might
cause excessive splitting loss. Model 5213IFD is
similar, but includes two amplifiers in one housing.
This is for dual cable, dual polarization systems.
Order #
33-9440
Mfr. #
5113IFD
(ea.)
$9.48
10dB Micro Amplifier
10dB micro amplifier with
45~1000MHz bandwidth. Soldered
back ensures 130dB RFI
shielding. Heavy-duty
tin plated
zinc housing.
Specifications:
Noise figure: 7dB.
Power: 12VDC, 100mA.
via included adaptor
(using “F” cable).
Order #
33-7125
(1-9)
$19.95
NET 30
Terms
(10-up)
$14.99
OrderToll
Toll
Free
Order
Free
Fax
FAX
283
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
Order #
33-0020
Bi-Directional CATV Amplifiers
Digital amplifiers with return path for use with CATV
convertors (pay per view) and cable modems. Soldered
back ensures isolation and signal integrity.
Specifications: Bandwidth: 54~1000MHz. Noise
figure: 3.5dB. Power: 12VDC, 250mA via included
adaptor (using “F” cable).
C51 pg 284
7/31/06
10:14 AM
Page 284
SATV/CATV
Satellite IF Power Dividers
Section 14
Spartan 3 Mast
Mounted Preamplifiers
The industry standard 0064 DSB features a single 300ohm VHF/UHF input and a single 75ohm
output. Variations are available for applications requiring separate VHF and UHF inputs; 75ohm inputs; VHF
only models and models with active UHF and passive VHF passbands. They have been designed for optimized
performance with a supply voltage of +12~+22VDC from a satellite receiver. Features include: Surface-mounted
components for automated production and consistent high performance. Easiest installation in the industry. High
gain and ultra low noise figure from the latest generation transistors gives optimum sensitivity. Separate VHF
and UHF amplification plus the use of ultra linear transistors improve output capability for optimum signal
handling. Full lighting and surge protection.
Order #
33-8900
33-8905
Mfr. #
0064DSB
0264DSB
Inputs
Input Imp.
1 (VHF/UHF)
300
2 (VHF & UHF)
300
VHF Gain
16
16
UHF Gain
23
23
Power Supply
Yes
Yes
(ea.)
$89.29
94.66
ChannelMax®
Outdoor Antenna
Amplifier
Amplifies weak UHF/VHF television signals.
Increases incoming signal by 20 times. Consists
of antenna boom mounted amplifier, UL/CUL listed
power supply, 6' RG-59 coaxial cable, weather boot.
Packaged in a clear, clam shell blister pack for
optimum consumer appeal. Specifications:
Frequency range: 54-88MHz 174-806MHz. Impedance:
300ohm (in), 75ohm (out). Gain: 13dB. Power
required: 120VAC.
Order #
33-8945
Mfr. #
3039
(ea.)
$39.99
14
A
B
C
D
TITAN 2TM
Mast Mounted Preamplifiers
The Titan range of mast mounted amplifiers has
been completely reengineered and updated. These
amplifiers represent the ultimate in preamplifier
performance. They are designed for use as an ultra
low noise, ultra high gain preamplifier for deepest
fringe applications and MATV headend applications.
Their very high signal handling also makes them
suitable for use as a mast mounted, ultra low noise
distribution amplifier for use in small MATV
systems. All models feature 75ohm, input and output
connections in line with modern headend engineering
practice. Models 7777 and 7778 cover both VHF
and UHF bands with separate amplification in each
band for maximum signal handling. They may be
configured for either separate or combined VHF and
UHF inputs. They include a switchable FM trap.
Order #
33-8950
33-8960
33-8965
Mfr. #
Input
7775
UHF
7777 UHF/VHF
7778 UHF/VHF
VHF
Gain
N/A
23dB
16dB
UHF
Gain
26dB
26dB
23dB
(ea.)
$94.49
100.39
94.49
FM Trap
Drop Enclosures
These drop enclosures will house and protect
components from the elements that corrode and
shorten their lives. Drop boxes produce a professional
appearance for cable TV and satellite installations.
The Econo Box combines the design and features of
a drop box with an economical price. The Omni II
box offers simplicity of installation and professional
appearance along with a generous interior and
the ability to seal the box for drop security. The
Residential Control Box is designed to offer
visual evidence of tampering and provides for easy
maintenance. The Omni III is designed to facilitate
the proper turning radius of coaxial cables. The Omni
III is wide and deep enough to accommodate ground
blocks, splitters and power dividers used for dual
cable satellite installations. All boxes are UV
resistant and come in a neutral gray color.
Fig.
A
B
C
Order #
33-6940
33-6945
33-6950
D
33-6955
Description
Econo box
Omni II box
Residential
Control box
Omni III box
Dimensions
(H) x (W) x (D)
(ea.)
7.25 x 4.75 x 1.75 $4.09
5.75 x 5.0 x 1.25
2.89
8.75 x 6.25 x 2.75 6.09
6.5 x 9.0 x 1.75
4.79
NET 30
Terms
284
Order Online
www.mcminone.com
Audio from the FM band
can overcome the audio on
adjacent television
channels 6 and 7 and
harmonics of the FM carrier. The FM trap
eliminates the entire FM band from 88 to 108MHz
reducing video noise and audio interference.
Order #
33-341
(1-9)
$2.13
(10-49)
$2.09
(50-up)
$1.88
CATV FM Tapoff
•Zinc die-cast mounting
•Provides connection to stereo
tuner for MTV and other FM
broadcasts usually available
on cable TV lines
Order #
33-350
(1-9)
$4.49
(10-99)
$4.02
(100-up)
$3.53
These low cost, yet high
performance units have
many applications in satellite
IF distribution systems.
The 2201IFD, 2401IFD and
2801IFD pass DC power from
one output to the input (or in the opposite direction).
Thus only one receiver supplies LNB power and
controls any voltage switched polarization selection.
The 2202IFD and 2404IFD pass DC power from all
outputs to the input (or in the opposite direction).
Thus all receivers can supply LNB power. Care should
be taken to ensure the input of a receiver will not be
damaged by power from another receiver. Reverse
powering protection is provided in many receivers and
systems. These splitters are particularly useful where
several multi-switches are combined together as there
is no 0.8V drop across the diodes as in 2212IFD,
2414IFD and 2818IFD. Channel Master satellite IF
multi-switches include reverse powering protection.
The 2212IFD, 2414IFD and 2818IFD will pass DC
power from any output to the input. There is a 0.8V
drop across the diodes which are included to prevent
one receiver from passing power back to another
receiver. They are particularly useful in CATV
headends as the multiple receiver LNB powering
provides redundancy against losing LNB signals due
to a receiver failure. Unused outputs should be
terminated to achieve optimum flatness, return loss
and isolation. Channel Master terminators, Model
7184 (DC blocked) and Model 7190 (not DC blocked)
are recommended. Bandwidth: 950~2150MHz.
Order # Mfr. #
Two Way
33-9320 2201IFD
33-9325 2202IFD
33-9330 2212IFD
Four Way
33-9335 2401IFD
33-9340 2404IFD
33-9345 2414IFD
Eight Way
33-9350 2801IFD
33-9355 2818IFD
Description
(ea.)
One port DC pass
Two port DC pass
Two port DC pass, diode steer
$7.32
7.32
8.52
One port DC pass
10.44
Four port DC pass
10.44
Four port DC pass, diode steer 11.40
One port DC pass
28.68
Eight port DC pass, diode steer 30.00
Solder Back Indoor/Outdoor
Directional Couplers and Taps
Blonder
Tongue offers
a complete
line of
professional
quality
A
indoor/outdoor
B
couplers and
tapoffs covering frequencies up to1000MHz. These
products are available in both an L or T style cases.
The variety of loss values offered guarantees that they
have the right product for your application. These
products feature a durable outdoor rated soldered
back, cast housing, which shields against EMI and
RFI disturbances.
Order #
Loss(dB)
A. L Style-SCW models
33-2941
4
33-2946
6
33-2951
9
33-2956
12
33-2961
16
33-2966
20
33-2967
24
33-2968
27
33-2969
30
B. In-Line Style-SRT models
33-2971
4
33-2976
6
33-2981
9
33-2986
12
33-2991
16
33-2996
20
33-2997
24
33-2998
27
33-2999
30
(1-9)
(10-up)
$2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
$2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
C51 pg 285
7/31/06
10:16 AM
Page 285
SATV/CATV
D
E
C
A
B
A
High frequency splitters used for satellite and DSS
applications. Power passive to operate in–line amps
and multi-switches. Bandwidth: 5MHz~3000MHz.
Description
(1-9)
(10-up)
2-Way
3-Way
4-Way
6-Way
8-Way
$6.05
8.07
8.99
16.11
17.12
$5.19
7.27
8.23
15.55
16.59
2-Way
3-Way
4-Way
6-Way
8-Way
6.05
8.07
9.21
16.35
17.12
5.19
7.27
8.44
15.78
16.59
A
Section 14
C
High
D
Frequency
Vertical Satellite Splitters
High Frequency Horizontal Satellite Splitters
Fig
Order #
1 Port Passive
A
33-4350
B
33-4355
C
33-4360
D
33-4365
E
33-4370
All Ports Passive
A
33-4375
B
33-4380
C
33-4385
D
33-4390
E
33-4395
B
E
Splitters
High frequency vertically oriented splitters used
for satellite and DSS applications. Power passive to
operate in-line amps and multi-switches. Bandwidth:
5MHz~3000MHz.
Fig. Order #
1 Port Passive
A
33-10235
B
33-10236
C
33-10237
D
33-10238
E
33-10239
All Ports Passive
A
33-10240
B
33-10241
C
33-10242
D
33-10243
E
33-10244
Description
(1-9)
(10-up)
2-way
3-way
4-way
6-way
8-way
$5.99
7.99
8.99
15.95
16.95
$5.69
7.59
8.54
15.15
16.10
2-way
3-way
4-way
6-way
8-way
5.99
7.99
8.99
15.95
16.95
5.69
7.59
8.54
15.15
16.10
Order#
33-10180
33-10185
33-10190
(ea.)
$7.69
10.95
C
B
A
High-Frequency Splitters
Vertical Splitters
•Nickel plated zinc die-cast housing •RFI shielding
•2GHz splitters feature one power passive port
marked on the splitter
Order #
5~1000MHz
33-4880
33-4885
33-4890
33-4895
33-4900
5~2150MHz
33-7140
33-7150
33-7155
33-7160
Description
(1-9)
(10-up)
2-way
3-way
4-way
6-way
8-way
$3.02
4.03
5.04
6.05
7.06
$2.59
3.63
4.15
5.19
6.23
2–way
4–way
6–way
8–way
5.99
9.99
15.95
17.95
5.65
8.99
13.34
15.40
•Heavy-duty, die-cast design •Power passive
•Low thru-loss •950MHz~1750MHz •For use
with satellite systems and other
high-frequency applications
Fig
A
B
Order #
33-0035
33-0040
•Coaxial connections •Creates
signals from one signal source •Useful in connecting
picture-in-picture TVs with a cable box
Order #
M61000
M61001
M61002
Description
2-way
3-way
4-way
(1-9)
$5.75
6.17
6.35
C
Power passive
splitters allow
for use of
in-line
B
amplifiers and
other DC
powered devices. For applications to 1000MHz.
Fig
A
B
C
Order #
33-4400
33-4405
33-4410
Description
2-way
3-way
4-way
(1-9)
$2.51
3.02
3.52
Mini hi-frequency splitter saves
space in confined areas. DC
passive one port. Attached
plastic cable channel provides
neat installations. Bandwidth:
5~2250MHz. Measures: 2" x 2" x 1"
(port to port).
(10-up)
$8.22
13.19
C
B
E
D
(1-9)
$5.04
Weatherproof Zinc Die-Cast Splitters
•High-quality, zinc die-cast that features
anti-corrosion plating •Power passive
•Precision threads •UHF/VHF/FM •5~900MHz
(10-up)
$4.67
A
(10-up)
$2.07
2.59
3.11
(1-9)
$8.39
13.84
Mini Hi-Frequency Splitter
Order #
33-4860
Power Passive
Splitters
Description
2-way
4-way
A
Splitters
Fig.
A
B
C
Description
(1-9) (10-up)
Two-way splitter $19.95 $14.41
Four-way splitter 29.95 25.46
Eight-way splitter 49.95 42.46
Fig. Order #
A 33-060
B 33-070
B 33-0055
C 33-080
D 33-090
E 33-100
Description
(1-9)
Mini 2-way
$1.49
2-way
1.79
2–way gold plated 2.09
3-way
2.39
4-way
1.11
8-way
5.09
(10-99) (100-up)
$1.16 $1.00
1.44 1.24
1.81 1.65
1.04 0.94
4.89 4.58
Budget High
Frequency Splitter
High frequency for use in DSS
and satellite installations. One
port is DC passive. Bandwidth:
5~2400MHz.
Order #
33-8640
(1-9)
$2.07
NET 30
Terms
(10-up)
$2.01
OrderToll
Toll
Free
Order
Free
Fax
FAX
285
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
Decription
2-way
4-way
Mfr. #
SP2
SP4
SP8
B
2.4GHz Bi-Directional Splitters
A
Fig.
A
B
C
B
•High-grade circuitry allows the connection of
components with minimal signal loss •Maximum
transfer of all your RF signals including higher
digital frequencies means quality reception and
excellent picture output •Splits a 75Ω coaxial signal
from cable TV, an antenna or a VCR for connection
to two TVs/VCRs •Frequency: 5MHz~2.4GHz
•Gold-plated input/outputs for reliable connectivity
•Dual-grounded connections •Precision cast body
Fig. Order #
A
DT24SP
B
DT44SP
A
T2 passives provide
RF, IF and satellite
radio distribution in
any installation.
B
They feature a
sealed weatherproof,
all-aluminum
housing with “F”
connectors spaced
C
farther apart and
placed more forward
for easier hand tightening. They also feature DC
passing on all ports to make them compatible with
amplified antennas and coaxial IR systems.
C51 pg 286
7/31/06
12:17 PM
Page 286
SATV/CATV
Combines and separates your DBS
satellite and off–air signals. TERK
diplexers deliver sharper cut–off
frequencies, lower signal loss and
better impedance matching. Low quality diplexers
can cause signal loss and poor picture quality. High
quality die–cast aluminum housing. Specifications:
Frequency response: 54~2150MHz. Impedance:
75ohm. Insertion loss: Antenna, 1dB, Satellite, 2dB.
Return loss: 10dB. Isolation: Antenna, 40dB, Satellite,
40dB. Mfr. #BDS-21BP.
The in-line port design of
these splitters helps to
keep cables organized
and makes them
perfect for installations
in crowded areas.
Nickel plated zinc
die cast
construction.
Bandwidth:
5~1000MHz.
Section 14
A
Diplexer
In-Line Splitters
B
Order #
33-4865
33-4870
33-4875
C
Description
2-way
3-way
4-way
(1-9)
$3.02
4.03
5.04
(10-up)
$2.59
3.63
4.67
High Frequency RFI Splitters
DirecTV compatible high frequency performance to
3GHz. •Tin-plated zinc die-cast housing with soldered
back to achieve RFI -130dB •Waterproof and airtight
up to 30 P.S.I. with 4.55mm grounding hole and
stainless steel screws •Low thru loss and high
isolation with patent pending 360° insert pin.
Bandwidth: 5MHz~3000MHz.
Fig.
A
B
C
Order #
33-10245
33-10246
33-10247
Description
2-way
3-way
4-way
(ea.)
$2.79
3.19
3.79
14
Order #
2512
2514
2538
Insertion
Loss
3.5 dB
8.0 dB
12.0 dB
Description
2–way
4–way
8-way
DC & IR
Passing
Yes
Yes
No
Digital Splitters
Description
Two–way
Four–way
(ea.)
$4.13
6.30
Directional Taps
Value
8dB
16dB
Zinc plated die cast diplexer
to combine off air television
signals with satellite for ease of
system installation. Power
passive one port. Bandwidth:
40~2150MHz.
Description
2-way
3-way
4-way
8-way
A
(1-9)
$0.89
1.99
2.99
5.99
(10-up)
$0.81
1.84
2.94
5.86
C
B
Order #
33-4810
(1-9)
$2.99
(10-up)
$2.56
Diplexer
Combine off air television
signals with satellite for ease
of system installation. Power
passive one port. Bandwidth:
5~800MHz/950~2050MHz.
Order #
33-4805
33-4800
(1-9)
$6.25
6.25
•For use in applications where additional shielding
is needed •100dB case design exceeds FCC
requirements for RF shielding •25% more zinc
content tha n standard splitters •Case thickness
increased by 50% to obtain very good RFI
performance •Mounting tabs with screws
and grounding block •5MHz~1000MHz
frequency response
Description
Commercial Grade
High Performance
(1-9)
$10.09
6.99
(10-up)
$9.35
6.17
Fig.
A
B
C
Order #
33-2130
33-2135
33-2140
Type
2-way
3-way
4-way
(1-9)
$2.11
2.92
3.42
(10-up)
$1.86
2.48
3.01
VHF/UHF/Satellite
Diplexer-Mixer
The TSDM-2150 is a compact
television antenna satellite
diplexer/combiner used in
applications that require
satellite I.F. distribution from 950~2150MHz. The
TSDM-2150 uses a rugged case that allows for
outdoor use. Specifications: •Frequency range:
Satellite: 950~2150MHz, television antenna:
40~860MHz •Connectors: “F” type •EMI
performance: >80dB
Order #
33-2710
(1-9)
$4.99
(10-49)
$4.79
(50-up)
$4.49
Satellite Diplexers
A
(10-up)
$5.92
5.92
NET 30
Terms
286
Order #
33-2900
33-2905
33-2910
33-2915
(10-up)
$2.07
RFI Splitters
Blonder Tongue offers a
complete line of professional
quality, economical indoor
directional couplers and
tapoffs with frequency
coverage to 900MHz. Several
models are available with four
way taps in varying attenuation values.
Order #
33-3000
33-3010
Fig
A
B
C
D
(1-9)
$2.59
Budget Diplexer
D
Performance to 1000MHz. 2, 3, 4 and 8 way
models. Die-cast housing. RF shielding. Mounting
tabs and grounding blocks.
(ea.)
$4.75
7.00
9.75
• Two–way and four–way
high performance splitters
•Gold–plated inputs/outputs
•Dual–grounded connections
•5MHz to 1GHz
•Precision cast body
Order #
DT2SP
DT4SP
C
Indoor Splitters
The Channel Plus
bi–directional
splitter/combiners
provide a 1GHz
bandwidth and are ideal
for antenna and coaxial cable operations. It can be
used to split a signal from a source or combine
signals from multiple sources onto one coax run.
Satellite Diplexer
Order #
33-8620
(2-up)
$2.29
2.79
3.19
Splitter/Combiner
(ea.)
$9.95
•Zinc die-cast housing •RFI
shielding •Power passive
satellite port •Includes
grounding screw
•Bandwidth: 40~2150MHz
B
A
Order #
33-7235
Order Online
www.mcminone.com
B
C
U/V Directional Taps
•Provides high isolation from reflected signals
•Maintains constant 75ohm impedance on trunk
line •Tap at 12, 17 and 23dB
Order #
Description
(1-9)
A. One Output Zinc Die-Cast
33-1175
12dB
$2.89
33-310
17dB
2.99
33-1180
23dB
3.09
B. Two Outputs
33-1185
12dB
4.29
33-320
17dB
4.19
33-1190
23dB
4.29
C. Four Outputs
33-1195
12dB
5.99
33-330
17dB
5.89
33-1200
23dB
6.09
(10-49)
(50-up)
$2.61
2.70
2.74
$2.24
2.32
2.35
3.83
3.80
3.82
3.54
3.51
3.53
5.62
5.36
5.70
4.77
4.55
4.84
The 4001IFD and 4002IFD
diplexers are used for
separating or combining
satellite signals at 950~2150MHz
with VHF/UHF signals at
54~806MHz. In addition, a DC
power pass is provided from the
satellite port to the common in order to pass satellite
receiver LNB voltage. Model 4022IFD contains two
4002IFD diplexers and a VHF/UHF signal splitter.
When used with a twin LNB, diplexed satellite and
VHF/UHF signals are provided to two locations within
a building. Model 4032IFD is identical except DC is
passed from one output to the VHF/UHF input for
preamplifier power.
Order #
33-9415
33-9420
33-9430
33-9435
Mfr. #
4001IFD
4002IFD
4022IFD
4032IFD
(ea.)
$9.00
17.88
25.61
24.84
C51 pg 287
7/31/06
10:21 AM
Page 287
SATV/CATV
A
B
C
Section 14
A
Diplexers
B
Ground Clamps
T2 passives provide RF,
IF and satellite radio
distribution in any installation.
They feature a sealed, weatherproof, all-aluminum
housing with “F” connectors spaced farther apart and
placed more forward for easier hand tightening.
They also feature DC passing on all ports to make
them compatible with amplified antennas and
coaxial IR systems.
Fig. Order#
A 33-10215
B 33-10220
Mfr. # Description
(1-9) (10-up)
DP1
Diplexer
$19.95 $16.96
DP2
Wallplate diplexer 19.95 16.96
•For indoor and outdoor use
•RF shielding exceeds FCC
specifications •Maintains 75ohm
impedance on trunk •Full
5MHz~900MHz operational
range •Use 75ohm terminator on
last trunk output (MCM #33-550)
Description
16dB
20dB
24dB
(1-9)
$6.25
6.25
6.25
(10-49)
$5.92
5.92
5.92
(50-up)
$5.40
5.40
5.40
Diameter
3
⁄8"
5
⁄8"
1
⁄2"~1"
(1-9)
$1.79
2.09
2.89
(10-up)
$1.25
1.64
2.46
Split Bolts
Dimensions
⁄2" x 1 1⁄4"
3
⁄8" x 1"
(1-9)
$2.89
1.89
1
(10-49)
$2.67
1.74
(10-up)
$79.95
3
Order#
33-9700
(1-9)
$5.49
A
Copper
Grounding Straps
B
•Used for grounding of electronic equipment to cold
water pipes, etc.
Fig. Order #
A
33-1535
B
33-1540
Size
6"
12"
(1-9)
$1.00
1.32
(10-up)
$0.72
1.04
Type THHN wire commonly used as ground wire.
10AWG stranded or solid copper with oil and gas
resistant coating. Available in stranded and solid.
(1-4)
$30.29
Order #
24-5365
24-5370
24-5375
75ohm In–Line
(1-9)
$2.79
(10-49)
$2.37
(50-up)
$2.24
Fixed Mini-Types
•Nickel plated solid
brass body •Monolithic
ceramic printed circuit
board, ensuring rugged
construction •5%
accuracy •22 gauge
steel center pin •Small: 13⁄8" size •“F” type female to
male •75ohm •Three attenuators to choose from
•Sorry–no mixing of values for quantity pricing.
Order #
33-790
33-795
33-810
dB
3
6
12
(1-9)
$1.35
2.07
(10-99)
$1.27
2.03
(100-up)
$1.16
1.93
Grounding Block
•Zinc die-cast •Mounting
screws included.
Description
Single
Dual
(ea.)
$0.82
2.69
Description
Stranded, 500' spool
Solid, 500' spool
Solid, sold per foot
(ea.)
$129.94
129.94
1.11
(2-up)
$107.06
0.88
Snap-N-Seal
Ground Blocks
These Snap-N-Seal ground
blocks are the perfect way
to make your ground with
less chance of allowing
moisture to get into the
connection. The unique
design incorporates the Snap-N-Seal feature on the
ground block.
Order #
33-4175
33-4180
Cable type
RG-6
RG-6QS
(1-9)
$6.14
6.14
(10-49)
$5.63
5.63
(50-up)
$5.11
5.11
Double Galvanic
Lightning Arrester
Protects your valuable
video equipment
from voltage surges
caused by lightning
strikes to or near
antennas or cable
television lines.
Frequency range: 5MHz~1GHz.
Order #
33-8695
(1-9)
$5.19
(10-up)
$4.81
Fixed Mini-Type Attenuator Pads
•6dB attenuation
•5~900MHz frequency.
Order #
33-560
Description
Single
Dual
8
Ground Wire
Order #
33-6915
Order #
33-7705
33-7710
4' x ⁄ " Universal Grounding Rod
DISHNetwork
Block Switch
Use with next
generation DBS dishes
for DISHNetwork and
DirecTV to switch between
programming on two
LNBs. Controlled by the
DISHNetwork receiver.
High frequency
ground blocks have
extended frequency capacity to 2.4GHz making them
perfect for satellite and digital applications. Nickel
plated finish to resist effects of the weather.
(1-9)
$3.09
3.19
3.19
(10-49)
$2.68
2.77
2.78
(50-up)
$1.77
1.84
1.84
Features: Nickel-plated,
solid brass body, monolithic
ceramic printed circuit
board, ensuring rugged
construction, etched
glaze-type resistors provide
±5% accuracy and excellent
return loss, small 1.375"
size, 22-gauge spring steel center pin, female
to male fitting, not DC passive. Specifications:
•Bandwidth: 100KHz~1750MHz •Return loss:
20dB typical •Accuracy: ±5%
Order #
33-2750
33-2755
33-2760
33-2765
33-2770
33-2775
33-2780
Description
3dB
6dB
8dB
10dB
12dB
16dB
20dB
(1-9)
$1.30
1.30
1.30
1.30
1.30
1.30
1.30
(10-up)
$1.03
1.03
1.03
1.03
1.03
1.03
1.03
High Frequency
Attenuators
General purpose wide band
in–line attenuators to prevent excess signal
overloading of an amplifier or receiver. For ease of
installation one end is male the opposite is female.
Units are power passive. Bandwidth: 40~2150MHz.
Order #
33-9565
33-9570
33-9575
Mfr. #
2803IFD
2806IFD
2810IFD
Description
3dB
6dB
10dB
(ea.)
$6.31
6.31
6.31
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
287
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
(1-9)
$89.95
High Frequency
Ground Blocks
Order #
33-470
33-1800
The 4' universal grounding rod is ideal for
completing your system installation. The copper
coated steal construction prevents ground
loop problems.
Stacking convertors are
designed to allow two LNB
signals to share the same
coax. This allows you to
have all programming
(110° and 119°) at the receiver without running
additional cables. Down–converts the signal at
the receiver (not necessary with Sony
wide–band receivers).
Description
Down–convertor
Order #
33-6895
33-6900
33-6905
Order #
33-7020
33-7025
LNB Stacking Convertors
Order #
33-7135
Fig.
A
B
C
Quickly and securely connects
ground wires together.
Connect the ground for an
antenna or DSS to the house
ground. Available in two sizes.
Four-Way
Couplers
Order #
33-1425
33-1430
33-1435
A properly grounded antenna or satellite system
will not suffer from the effects of ground loops.
These ground loops can be identified as beat and
hairingbone in the picture. Available in 3⁄8" and 5⁄8" for
connecting to ground rods and two piece clamps for
connecting to 1⁄2" to 1" water pipes.
C51 pg 288
7/31/06
10:22 AM
Page 288
SATV/CATV
DBS Antennas
Help eliminate the
effects of rain fade and
low signal levels with
larger DBS antennas.
Gray powder coated finish
helps the antennas stand
up to weather.
LNB not included.
Section 14
18" x 20" DIRECTV®
Multi-Satellite Dish
Antenna
The TERK TRK-S26
is a DIRECTV
Multi-Satellite Dish
Antenna that will
help you get the most
out of your DIRECTV®
programming.
It provides three
integrated LNBs so
you can receive all
available DIRECTV® programs, including HDTV
and DIRECTV PARA TODOST M programming.
In addition, it saves you money by eliminating
additional hardware installation that you would
need to receive these services. The TRK-S26 features
four identical outputs letting you connect up to four
receivers for a household system, and its compact
size makes it an ideal choice to use with RVs and
motor homes. A DIRECTV approved antenna is a
necessity if you are looking to receive the best from
DIRECTV® service. TERK’s TRK-S25 Multi-Beam
Dish is a high-performance solution for receiving the
best quality signal. It combines ease of installation
with versatility, quality and performance. Its 18" x
20" size makes it easy to maneuver and its triplehead LNB, with built-in multi-switch, are completely
integrated, making installation easier. The TRK-S26
can also be installed faster with its refined and
improved mounting system and its three-way tilt,
for easier rotation.
Mfr. #
TRK-S26
(1-5)
$89.95
14
Order #
33-9670
Sure Shot Dish
Exclusive “perfect curve”
manufacturing process
maintains a precise surface
tolerance, which allows
maximum signal reflectivity
and gain for the best
possible reception.
These antennas are
built heavier and stronger
than competitive models.
Able to withstand up to
120 mph wind gusts, these
power-coated galvanized
steel antennas are backed
by a lifetime warranty. Dish
includes mount and mounting hardware,
LNB not included.
Order #
33-2615
Size
24"
Order #
33-4925
33-4930
Diameter
30"
36"
Gain
38.4dB
39.8dB
(ea.)
$59.99
126.99
Portable Satellite
Antenna System
Portable/Remote
Digital Satellite System
•Lightweight, easy to set up and ready to go •Bases
are completely and permanently assembled •Base
has built in level and compass •Convenient handle
for carrying and 25' of cable permanently stored in
the bottom of the base •Perfect for camping, fishing
trips, tailgating and picnics
Order #
RD-9046
(ea.)
$171.69
“Sat C” Kit
The Sat C kit
upgrades an
existing
multi-satellite dish
with 2 LNBs to a 3
LNB dish capable of
receiving all future
DIRECTV® programming options from the 110°
satellite, including HDTV and local–to–local.
Kit includes: Sat C LNB, Sat B/Sat C combiner,
coax cables and hardware. Specifications: Input
frequency: 12.6~12.7GHz. Output frequency:
1.061~1.049GHz. Noise figure: 1.4dB max.
Gain: 50~62dB. Mfr. #LNB-CBP.
Order #
33-7205
This portable
satellite antenna
system is no bigger
than a briefcase.
Enjoy your DSS
system in your RV, on
your boat, while
camping or anywhere
you desire. Multiple
installation options
for mounting on a
wall, balcony rail,
pole, table and the
suction cup makes
mounting a breeze.
Includes: Dish
antenna, LNB,
satellite locator, “C”
clamp, suction stand, carry case and RG-6 cable.
Order #
33-4690
(ea.)
$109.00
(kit)
$34.95
High Performance LNB
DBS LNB for use with digital
satellite system dishes with
rectangular shaped tubes. Designed
to work with “D” shaped tubes as
well. Perfect low cost replacement
for damaged LNBs.
Order #
33-7435
Elliptical Dish Replacement Parts
Description
Dual LNB
(ea.)
$72.67
(ea.)
$34.95
Dual LNB
Order #
246434
246435
246436
246437
246438
246439
246440
246441
246492
Description
Antenna, elliptical
Base/tube assembly
Bracket, antenna tilt
Fine tune hardware for 246436
Hardware kit, nuts and bolts
Multiswitch, indoor
Support arm for LNBs
Support housing for LNBs
LNB, dual output
(ea.)
$27.93
13.23
12.18
5.99
9.77
83.48
6.30
6.72
61.22
Original OEM quality LNB
manufactured in Japan.
Light gray.
Hot Shot
Peel-N-Stick
Order #
246492
Retrofit your DSS
dish with a Hot Shot
Peel-N-Stick de-icing
system. The Hot Shot
fits all 18" dishes, installs fast and easy and solves
snow and ice problems.
Order #
33-3230
(ea.)
$119.00
(2-4)
$114.00
(5-up)
$107.00
NET 30
Terms
288
Order Online
www.mcminone.com
(ea.)
$61.22
DSS Replacement Parts
MCM is an authorized distributor
for replacement DSS parts. You can order
original DSS replacement parts, components
and support accessories. Listed below are some
popular DSS parts. If you don’t find the part
you need, call our sales staff for assistance.
Order #
246492
221203
Description
LNB, dual, light gray
Hardware kit, nut, bolt and washer
assortment
(ea.)
$61.22
19.69
Order #
RC926
D6706
Description
Wireless phone jack
72" antenna pole
(ea.)
$54.95
16.83
C51 pg 289
7/31/06
10:23 AM
Page 289
SATV/CATV
Multi-Switches
MS-EXT Active
Multi-Switch
Extender
•Compatible with
MS58 and MS516
multi-switches
•Snaps onto bottom of multi-switch allowing
additional multi-switched to be daisy chained
together, Ex. Allows for MS516 multi-switches to
be combined to feed 64 satellite recievers •Includes
internal amplifier •Powered directly from primary
multi-switch unit •Mfr. #MSEXT
Order #
33-10210
(1-9)
$119.00
(10-up)
$101.15
MS-34
3x4
Multi-Switch
•Sealed aluminum
housing designed
to last in any
environment
•Flat/low loss RF
circuitry ensures
a clean, consistent
signal across the
entire frequency
spectrum •DC power pass allowing the use of
amplified antennas Specifications: •Frequency
range forward path 5~806MHz, satellite inputs
950~2150MHz, outputs 5~2150MHz •Insertion loss
RF -10dB, satellite 2dB •Isolation: Satellite in to
satellite in -35dB, out to out (RF) -25dB, out to out
(satellite) -25dB •Cross polarization -30dB
•DC pass 500mA
Order #
33-10195
Mfr. #
MS34
(1-9)
$89.95
(10-up)
$76.46
The T2 line of multi-switches is like nothing else on the
market. These enclosure-mounted designs feature wire
management properties, such as 45° angled “F” connectors,
with both inputs and outputs facing in the same directionand
a wire management handle to keep cables dressed cleanly.
They also feature an internal, ultralow noise amplifier and a
switchable, bi-directional return path.
Section 14
MS-516 5 x 16
Multi-Switch
MS-58 5 x 8
Multi-Switch
•Compatible with
HDTV •For use with
phase 3 triple head
LNB dishes enabling
advanced satellite
system integration
•Bi-directional circuitry
ensures compatibility
in both terrestrial and
cable installations
•Ultra low-noise
amplifier with
adjustable tilt and
gain to optimize signal
strength where necessary •Dual LNB compatible,
future proof solution for dual LNB installs
Specifications: •Frequency range forward path
54~806MHz, return path 5~42MHz, satellite inputs
950~2150MHz, outputs 5~2150MHz •Insertion loss
RF -3dB, satellite 0dB •Return path on/off switchable
•Flatness: RF ±2dB, satellite ± 0dB •Gain control
(RF): 15dB •Tilt control (RF): 15dB •Isolation:
Satellite in to satellite in 35dB, out to out (RF) 17dB,
out to out (satellite) 35dB •Cross polarization -30dB
•Power supply: Onboard 22KHz signal standard
Order #
33-10200
Mfr. #
MS58
(1-9)
$419.00
(10-up)
$356.15
•Compatible with HDTV
•For use with phase
3 triple head LNB dishes
enabling advanced
satellite system integration
•Bi-directional circuitry
ensures compatibility in
both terrestrial and cable
installations •Ultra
low-noise amplifier with
adjustable tilt and gain to
optimize signal strength
where necessary •Dual
LNB compatible, future
proof solution for dual LNB
installs Specifications:
•Frequency range forward
path 54~806MHz, return
path 5~42MHz, satellite
inputs 950~2150MHz,
outputs 5~2150MHz
•Insertion loss RF -6.5dB, satellite 0dB •Return
path on/off switchable •Flatness: RF ±2dB, satellite
± 2.5dB •Gain control (RF): 15dB •Tilt control (RF):
15dB •Isolation: Satellite in to satellite in 35dB, out
to out (RF) 17dB, out to out (satellite) 35dB •Cross
polarization -35dB •Power supply: Onboard 22KHz
signal standard
Order #
33-10205
Mfr. #
MS516
(1-9)
$589.00
(10-up)
$500.65
14
C/Ku Band
Feedhorn
C/KU
feedhorn
with “C”
band and
“Ku” band
LNBs. This
feedhorn allows
for satellite
viewing of both formats from one “C” band satellite.
Specifications: (C-Band) Input frequency:
3.7~4.2GHz. Polarization: Linear, 3 wire servo type.
Output frequency: .950~1450GHz. Noise figure:
20°K. (Ku Band) Input frequency: 10.95~12.5GHz.
Polarization: Linear, three wire servo type. Output
frequency: .950~1450GHz. Noise figure: .6dB max.
Order #
33-4715
(ea.)
$190.00
C
A
D
B
4DTV
compatible
C/Ku feedhorn
with digital “C”
band and “Ku” band LNBs. This feedhorn allows for
digital satellite viewing of both formats from one “C”
band satellite dish. Specifications: (C-Band) Input
frequency: 3.7~4.2GHz. Polarization: Linear, 3 wire
servo type. Output frequency: .950~1450GHz. Noise
figure: 20°K. (Ku Band) Input frequency:
10.95~12.5GHz. Polorization: Linear, three wire
servo type. Output frequency: .950~1450GHz. Noise
figure: .6dB max.
Order #
33-4720
(ea.)
$185.00
ASTROTEL
High Stability C
and Ku Band LNBs
Precision C and Ku Band LNBs
“C” and “Ku” band LNBs for use with “C” band
antennas. Professional feedhorns and commercial
grade LNBs assure high performance with low noise.
Input and output frequencies are in GHz.
Noise Input Output
Fig. Order # Band Figure Freq.
A 33-4695 C
17K 3.7~4.2
B 33-4700 C
15K 3.4~4.2
C 33-4705 Ku
0.6 11.7~12.2
D 33-4710 Ku
0.5 11.7~12.2
4DTV
Compatible
C/Ku
Feedhorn
with LNB
Freq.
(ea.)
.950~1.45 $24.95
.950~1.45 34.95
.950~2000 32.27
.950~2000 38.95
High stability “C”
and “Ku” band LNBs
for use with “C” band
antennas.
Professional
A
feedhorns and
commercial grade
B
LNBs assure high
performance with low
noise. Input and output frequencies are in GHz.
Noise Input Output
Fig. Order # Band Figure Freq.
Freq.
(ea.)
A 33-6805 C
20K 3.7~4.2 .950~1.45 $88.89
B 33-6810 Ku
0.6 11.7~12.2 .950~1.45 88.89
ASTROTEL
High Performance Dual
“C” Band/Ku-Band
Feedhorn
High performance
dual “C” band and
wideband dual
KU-band in one
ortho–mode
feedhorn. This
precision
feedhorn
incorporates
the latest ortho–mode
technology. It offers wideband reception on the Ku
and adjustable scalar ring with two sets of mounting
holes. Specifications: “C” band two port:
frequency: 3.7~4.2GHz, isolation: 35dB. “Ku”
band two port: Frequency: 10.95~12.75GHz,
isolation: 25dB. Note: LBNs not included.
Mfr. #PM-C/KU-OR-2+2.
Order #
33-6825
(ea.)
$150.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
289
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C51 pg 290
7/31/06
10:25 AM
Page 290
SATV/CATV
DSS Trunk Amp
Use this amplifier in–line
when installing a large
cascading system. Installs
at the beginning of the
system to keep the
integrity of the signal and to provide power
to the Commercial Cascading Multi–Switches,
#33-7065/7070. Variable gain, 12~18dB on satellite
signals and fixed gain, 20dB on local signal. Includes
two power inserters to provide control voltage to the
dish’s LNBs.
Section 14
5 x 8 Integrated Multi–Switch
HDTV
Compatible 5 x
8 Multi-Switch
Expand and
distribute your
DirecTV satellite
signal from any
phase II or phase III, 18" x 24" antennas, to up to
eight rooms. Also capable of combining off-air or cable
TV with satellite signals. Ideal for dual tuner DVRs.
Features: •Four satellite inputs and one terrestrial
TV input for up to eight satellite receivers •Built-in
amplifier to overcome splitter loss •Two dual LNB
selectable by 13/18VDC or 22kHz tone •Matrix
routes between any inputs to any outputs •Rugged,
weatherproof outdoor housing •Bandwidth:
5MHz~2150MHz •Power: 24VAC power
supply included.
Order #
33-10250
The BMS-58 allows up to eight satellite television
receiver connections to a single multi–satellite dish
and provides an additional off air antenna/cable
input to integrate all television options. With the
Terk BMS-58 multi–switch you can install a home
theater multiplex in no time by connecting up to
eight receivers with ease. There is no need to remove
integrated multi–switches already embedded in the
satellite dish. Simply connect the two SatA and SatB
cables to the BMS-58 and run to the receivers. The
BMS-58 has an ultra–low noise built–in amplifier to
eliminate signal loss and deliver the best possible
reception to every TV. The TERK BMS-58 is designed
to be waterproof making it rugged, durable and easy
to install.
Order #
33-9665
Mfr. #
BMS-58
Order #
33-7075
(1-9)
$289.00
(10-up)
$256.47
Satellite Multi-Switches
3 x 4 multi-switch combines
local television or cable
television signal with satellite
signal for distribution to four
satellite receivers. Line powered
by the receiver’s LNB voltage.
Zinc die cast housing.
Specifications: Satellite: 950~2150MHz.
Terrestrial: 47~862MHz. Current: 60mA.
Order #
33-8625
(1-9)
$20.76
(10-up)
$19.24
(ea.)
$74.95
(ea.)
$119.00
DBS Multi–Switch with External Power
B
A
Satellite
Multi-Switches
14
5 x 12 Multi-Satellite Multi-Switch
Four satellite IF and one terrestrial TV input to 12
outputs to satellite receivers. Built–in satellite IF
amplifier compensates for splitter loss. LNB selection
by 14/18VDC and 22KHz tone provided by equipped
receivers. Built–in power supply provides power for
operation, amplification and operation of the LNBs.
Order #
33-8690
(1-9)
$79.95
(10-up)
$77.95
Commercial
Cascading Multi-Switch
Designed for use with the
new generation of DSS
satellite dishes. Installations
throughout condominiums,
apartment complexes, hotels
and institutions can share
one double/dual LNB
satellite antenna (18" x 24").
Cascading multi–switches pass the DC control
voltage and satellite signals from one multi-switch
to the next. Power is supplied to the system by a
DBS trunk amp, #33-7075. An indoor diplexer (sold
separately) separates the combined satellite and
antenna signal at the receiver.
Order #
33-7070
Description
5 x 6 multi-switch
(1-9)
$139.00
•Designed for satellite
installations in
condominiums, apartment
complexes, hotels and
institutions •Only one
satellite dish is needed,
with the cascadable
multi-switches control
voltages are passed from
C
one multi-switch to the
next •Four inputs for multi-satellite (18" x 24") DSS
dishes •Switches polarization by 14/18VDC and
switches satellites by 22KHz tone •Line powered
via switching voltage supplied by the DSS receiver
•Terrestrial input for local antenna or cable
television, requires a diplexer for satellite/terrestrial
signal separation
Fig. Order #
Description
A
33-8655
5 x 4 multi-switch
Cascadable Multi-Switches
B
33-8660
5 x 4 multi-switch
C
33-8665
5 x 6 multi-switch
(1-9)
$24.95
(10-up)
$22.00
24.95
32.95
22.00
30.95
(10-up)
$132.87
290
Order Online
www.mcminone.com
The Magic Switch allows use of multiple receivers
and televisions with one dish and a dual LNB. The
Magic Switch combines UHF/VHF and satellite on
one coax cable and supplies both polarities at each
receiver. (#33-3245 does not combine UHF/VHF with
satellite signals). Available in 4, 8 and 16 way
switches. Magic Switch can be line powered by
satellite receiver or externally powered adaptor (not
included MCM #33-4430).
Order #
33-3235
33-3240
33-3245
Description
4 way
8 way
16 way
(ea.)
$115.83
214.12
360.00
(2-4)
$105.58
207.05
350.00
Order #
D6530
(ea.)
$52.45
A
B
Compact
Multi-Switches
Easily connect 4 to 8
receivers to a dual
C
LNB. Off–air input
for local antenna or CATV broadband input
(return path compatible). Output filter keeps
intermodulation and noise from interfering with off–air
signal. Active switch design draws no more current
than passive switches.
Fig.
A
B
C
Order #
33-7270
33-7275
33-7280
Mfr. #
SMS341F
SMS361F
SMS381F
Description (ea.)
3x4
$82.95
3x6
94.95
3x8
134.95
(2-4)
$80.10
90.95
119.43
Duo-Sat Cascadable
Multi-Switch
Magic Switch
NET 30
Terms
•Allows one satellite dish to operate up to four
receivers •Can also be used with outdoor antennas
•Compatible with most brands of satellite systems
•Suggested list $89.95
(5-up)
$94.81
196.95
329.00
Duo-sat multi-switch
cascadable to use in large
multi-receiver 8 receiver
outputs per multi-switch.
Designed for use with
Dishnetwork and DSS HD
and Plus receivers to
receive high-definition
programming and local to local broadcasts. Polarity is
selected by remote voltage and 22KHz signal
provided by the receiver. Must be used with system
amplifier SBK5500NF that provides system power.
Order #
33-7365
Mfr. #
SMK5581F
Outputs
8
(ea.)
$319.95
(2-4)
308.03
C51 pg 291
7/31/06
11:27 AM
Page 291
SATV/CATV
Satellite
Multi-Switches
AC powered
multi-switches feature a switching power supply
for stability and to supply a constant LNB voltage.
Easily connect 4 to 8 receivers to a dual LNB.
Off-air input features a switchable push-pull
amplifier with adjustable gain for clearer signals
from local antenna or CATV broadband input
(return path compatible).
Order #
33-7295
Duo-Sat Amplifier
Mfr. #
Description
SMS3803F
3x8
(ea.)
$349.95
(2-4)
$341.37
Duo-Sat amplifiers have
inputs for two dual LNBs and off air antenna. The
SBK5500NF is a system amplifier with -10dB gain
adjust for both LNB inputs. The system amplifier
provides system power to operate downstream
post-stage amplifiers. Duo-sat amplifiers maintain
the signal integrity throughout the entire system.
Order #
33-7348
Mfr. #
SBK5500NF
(ea.)
$549.95
(2-4)
$541.57
Compact Multi-Switches
A
B
C
Satellite IF
Amplifiers
Fig.
A
B
C
Order #
33-7330
33-7340
33-7345
Mfr. #
SBK3203NF
SVF128F
NVS126F
(ea.)
$349.95
109.95
239.95
Satellite Distribution
Multi-Switches
Channel Master®
Multi-switches are used to provide satellite signals of
either RHCP or LHCP polarization from one dish at
four or eight locations. In addition, when required,
they provide terrestrial VHF/UHF signals diplexed
on the same coaxial cable. At the customer outlet, the
satellite signals are separated from the VHF/UHF
signals with a diplexer such as model 4001IFD.
Model 6214IFD and Model 6228IFD combine
VHF/UHF (54~806MHz) signals with satellite IF
signals on one cable to provide up to eight
independently switchable wideband outputs.
Passive VHF/UHF processing allows complete
flexibility for VHF/UHF amplification. Models
6314IFD and 6328IFD amplify VHF/UHF
(54~806MHz) signals and combine them with
satellite IF signals on one cable to provide up to
eight independently switchable wideband outputs.
They should be used when all desired VHF/UHF
terrestrial TV signals can be received at comparable
levels from a stationary antenna or antenna system.
Order #
33-9490
33-9495
33-9500
33-9505
Mfr. #
Description
6214IFD
3x4
6314IFD
3x4
6228IFD
3x8
6328IFD
3x8
Amplified Terr. (ea.)
No
$81.36
Yes
95.64
No
156.48
Yes
179.88
Description
3x4
3x8
Installations throughout
condominiums, apartment
complexes, hotels and
institutions can share one
dual LNB satellite antenna.
Cascading multi-switches pass the DC control
voltage and satellite signals from one multi-switch to
the next. External power supply powers the
built-in amplifier. An indoor diplexer (sold
separately) separates the combined satellite
and antenna signal at the receiver.
(1-9)
$14.95
19.95
(10-up)
$13.55
18.55
Description
3 x 8 multi-switch
Power supply
(1-9)
$109.00
18.95
(10-up)
$101.97
15.40
RF/Satellite Meter
The Channel Vision RG/Satellite
Field Strength Meter has been
designed for the technician accurate
signal measurements for both
cable and satellite. This powerful,
simple frequencies from 25MHz
to 1550MHz. Now installation can
be quick, easy, and efficient.
Order #
33-9695
Mfr. #
M200
(1-9)
$449.00
(10-up)
$410.97
Satellite I.F.
Multi-Switch
The TSMS-2150 is a
satellite multi-switch
used in all applications
that require satellite I.F.
distribution from
950~2150MHz.
Intended for consumer use, it will allow the
residential user to take two LNB inputs plus an RF
input (40~860MHz) and provide four outputs. The
TSMS-2150 will route any of the inputs to any of the
outputs by utilizing the 14V/18V switching control
from the satellite receivers. To compensate for
insertion loss, it utilizes a built–in amplifier.
Specifications: •LNB input frequency:
950~2150MHz •TV antenna •Input frequency:
40~860MHz •Output frequency: Satellite:
950~2150MHz, television antenna: 40~860MHz
•Insertion loss: 950~2150MHz -5dB typical,
40~860MHz -4dB typical •Isolation: Horizon/vertical
-25dB, Output to output -14dB •DC passing
capacity: LNB 1 and 2: 550mA, VHF/UHF: None
•Connectors: “F” type
Order #
33-2715
(1-9)
$58.75
(10-up)
$51.50
#33-4425
#33-4415
Satellite Multi-Switch
Use multiple satellite receivers with one satellite
antenna with a dual LNB. The multi-switch
combines UHF and VHF with the satellite signal
to transmit them on one coax. These multi-switches
rely on power from the receiver for operation.
Order #
33-4415
33-4425
Description
(1-9)
4 way
$54.95
8 way (w/o DC jack) 99.95
(10-up)
$49.95
92.65
14
For use in
cascadable
satellite systems
these amplifiers
maintain signal integrity throughout a large system.
SBK3203NF provides power to the system and
acts as a launch amplifier and combines the local
antenna signal with the satellite IF. Post stage
amplifiers NVF220SR (dual amplifier) and NVF110F
(single amplifier) are powered over the coax cable and
operate in the 47~862MHz and 950~2200MHz
frequency bands. The SVF128F operates in the
950~2200MHz band and offers -10dB adjustable
gain. NVS126F operates in the 47~862 and
950~2200MHz bands and offers individual
-10dB gain adjustment for both bands.
Half the size of comparable multi-switches measuring
only 41⁄2" x 31⁄2". Half the current consumption of
comparable multi-switches to operate effortlessly
from the receiver’s line voltage. Built–in satellite
IF amplifier. Die cast aluminum body and precision
die–cut “F” connectors.
Fig. Order #
A
33-8680
B
33-8685
3 x 8 Cascading
Multi-Switch
Order #
33-7080
33-7085
B
A
Section 14
Satellite Signal Level Meters
The 1004IFD, 1007IFD and 1008IFD are intended to
aid in the alignment of a satellite dish. They include
satellite IF (950~2150MHz) amplification and a
broadband detector. The detector drives a meter and a
variable frequency audio tone. The dish is then aligned
for maximum meter deflection or highest pitch tone. A
gain control allows a wide range of input signal levels.
The units are connected to the LNB via a short coaxial
cable. The 1004IFD output must be connected to the
satellite receiver in order to supply power. The units
operate from 11~24VDC on the coaxial cable.
Connection to the receiver is optional with the
1007IFD and 1008IFD but extends battery life
between charges. All models allow measurement
of voltage on the coaxial cable. The 1007IFD and
1008IFD will also measure LNB current. The
1007IFD and 1008IFD includes an internal
rechargeable battery pack, carrying strap and a
wall plug recharging unit. The internal battery pack
allows a dish to be aligned before it is connected to
the satellite receiver. The battery pack is switchable
between 13 and 18V output, allowing either
polarization to be selected when used with a voltage
switched LNB. In US DBS applications, LHCP is
selected when the LNB voltage is nominally 17V.
Order #
33-9295
33-9300
33-9305
Mfr. #
1004IFD
1007IFD
1008IFD
(ea.)
$105.48
263.64
348.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
291
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C51 pg 292
7/31/06
11:29 AM
Page 292
SATV/CATV
Section 14
LIMITED
1 YEAR
WARRANTY
®
Satellite Meter
Use for easy
installation of
satellite receiver
dishes. The satellite meter operates on the power from
the receiver to LNB. Easy to read digital LCD display
with full text graphics menu and built-in audio tone to
aid in installation. Connect to single, dual or Phase III
LNBF, DishPro, or quad. Coax jumper cable not
included (MCM #32-580).
Order #
33-10035
(ea.)
$119.00
AcuTrac® Digital
Satellite Signal
Level Meter
The AcuTrak
allows an installer to easily align a multi–feed system
by displaying LNB A and LNB B signal strength
measurement levels simultaneously. The AcuTrak
features include: LCD display, selectable audio
on-off tone, receiver voltage output, individual LNB
current consumption, 22KHz tone and coax cable test.
AcuTrakplus includes: Rechargable battery pack,
leather case and AC/DC chargers.
Order #
33-7390
33-7395
Mfr. #
Acutrac
Acutracplus
(ea.)
$149.00
189.00
14
Features: •Signal strength peaking meter with level
control •Audible peak indicator •Built-in LNB power
source •LNB voltage and current measurement
•Horizontal and vertical LED polarity indicator and
voltage selection •Built-in Ni-Cad battery •Battery
test mode •Antenna and receiver “F” type connectors
•Includes carrying case with shoulder strap, swing
down bail, AC power adaptor and owner’s manual
Specifications
Frequency range
Input impedance
Detection range:
DC voltage:
DC current:
Dimensions/weight
The Sat-Finder makes it
easy to find maximum
satellite signal. Simply
connect between the
satellite receiver and the LNB to precisely align
the dish in seconds. The Sat-Finder has a faster
response time than the receiver’s signal strength
meter for more precise adjustments.
(1-9)
$24.95
(10-49)
$24.50
900MHz~2050MHz
75Ω
-60~-10dBm
0~25V
0~500mA
5" (L) x 21⁄2" (H) x 6" (D)/1 lb.
Order #
72-6281
(ea.)
$129.00
Compass
Economical compass for easily identifying
satellite positions. Small size fits in
the palm of your hand. Top
closes to protect surface
from scratches.
Specifications:
•Directional accuracy: ±5° •Direction indication:
2°/scale •Dimensions: 72mm x 55mm x 30mm
Order #
33-2050
Sat-Finder
Satellite Meter
Order #
33-7725
Portable Satellite Meter
(ea.)
$5.34
(2-10)
$4.87
(11-up)
$3.81
Satellite Dish Level
Attaches to the dish support to
quickly tell if the dish is plumb
and level. Mfr. #PVLEV1.
Order #
33-7425
(ea.)
$2.99
Satlook
Spectrum Analyzer
Perfect 10 Satlook is a
measuring instrument
developed for exact
alignment and
adjustment of satellite
dishes. The instrument
features a 41⁄2" B/W
monitor which either shows normal TV channel or
the frequency spectrum 950~2150MHz. Detection of
satellite signals is made easy. Spectrum mode and
the spectrum can be expanded for correct adjustment
of the polarization. Switching between spectrum/TV
mode is made easy by the push of a button. LNB
polarization is switchable, 13V/18V and indicated by
an LED. The instrument is short circuit protected
when connecting the LNB. Power is supplied by a
built–in rechargeable battery and is recharged
from the external battery charger or the car
adaptor. Charging of the battery is supervised by a
microprocessor which senses when the charging of
the battery is maximized. Charging is indicated with
“CH” on the two digit LED display.
Order #
33-3255
(ea.)
$823.00
Suunto Tandem
Inclinometer/Compass
The Suunto Tandem is two precision
satellite tools in one. Slope/height
(inclinometer) measurements are
easily done through the sight to alert
you to possible obstructions. Accurate
satellite bearings can be found with
the liquid filled precision compass.
Mfr. #PVCOMAF.
Order #
33-7420
(ea.)
$199.00
(50-up)
$23.75
Antenna Rotator
•Heavy-duty motor
handles large antennas
•Extra strong machine
cut gears won’t bind
•Brake pads hold firm
•Tested to 70 mph
winds •Requires
three–wire rotator wire (#24-3080)
Order #
30-1020
(ea.)
$74.95
Satellite Finder Kit
The satellite finder kit makes aligning a dish simple
and easy. The satellite finder attaches to the output of
the LNB or LNA and supplies power to the LNB/LNA
via the battery holder, or hook the finder in-line with
the receiver. Works with C or K band satellites and
DSS/DBS. Specifications: Frequency range:
950~1550MHz, power supply: 12~18VDC, 60mA,
input sensitivity: 62~80dB, impedance: 75ohm. Kit
includes: •Satellite finder, compass, RF jumper
cable and battery holder all in a vinyl carry case
•Use #27-1335 battery pack for DSS applications
Order #
33-1975
(kit)
$49.99
NET 30
Terms
292
Order Online
www.mcminone.com
Economical
Antenna
Rotator
Our economical
antenna rotator
helps improve
TV and FM reception. Two piece connects via three
wire rotator cable. Adjustable clamp accommodates
mast up to 11⁄2"
Order #
30-1100
(ea.)
$39.95
Antenna Rotator with
Memory and Remote Control
The remote controlled antenna rotator with 12
position memory is ideally suited for use in today’s
home theater systems. Micro–processor control
allows for up to 12 memory positions to be stored.
Dual display shows both direction and memory
position. Uses standard three conductor rotator
wire (#24-3080).
Order #
30-1101
(ea.)
$79.95
C51 pg 293
7/31/06
11:35 AM
Page 293
SATV/CATV
#30-1075
#PR-7010
#30-1010
#PR-7015
#PR-7042
Section 14
#PR-7032
#30-850
#30-840
#PR-7052
Prostar 1000
VHF/UHF/FM Antennas
•300ohm output •Digital ready •Die cut impedance
correlators allow close spacing of antenna elements
manufactured from high tensile aluminum that will
withstand strong wind and ice •Aluminum is
protected with high quality polymer finish to protect
for oxidation •Exlusive wrap-around mast clamps
can not crush antenna or boom mast •Completely
automatic hardware
Active
VHF
UHF
Boom
Order # Elements Elements Elements Length (ea.)
PR-7010
22
9
13
16.5" $55.95
PR-7015
31
12
19
87.75" 73.49
PR-7032
33
13
20
103.25" 81.69
PR-7042
43
17
26
149.75" 122.59
PR-7052
49
21
28
170.25" 143.19
#30-1015
SquareShooter™
HDTV2 Antenna
#30-1071
UHF/VHF/FM Antennas
•300ohm output, includes 75ohm transformer
Order #
30-1075
30-840
30-1015
30-850
30-1071
Description
Boom Length Elements (ea.)
Discovery D-9000
180"
91 $89.95
Colorstar 480
150"
48
64.95
Color King 5885
90"
34
40.35
Color King 5884
58"
25
30.25
Compact Antenna
70"
16
25.29
#30-1635
Order#
SS-1000
AP8700
#PR-9018
Order #
30-1710
#CA-7084
Boom Length
15.75"
50"
78.5"
114.5"
(ea.)
$109.95
#30-1645
Great UHF reception is accomplished by precise
director spacing with efficient corner reflector
system. Weak signals are captured and reflected
with minimal loss to the driven element for
increased gain on all UHF frequencies on Channels
14~69. Features built–in 300ohm VHF coupling
block. Ideal for use with digital televisions.
Acitve Elements
7
20
26
35
Mfr. #
3000A
(ea.)
$36.59
43.49
55.95
52.95
#CA-7082
Chromstar 2000
VHF/UHF/FM Antennas
#CA-7080
•75ohm output •1dB to
2dB higher gain on VHF and UHF for improved
picture quality •Zinc plated steel hardware
•Polyethylene boot covers keep connections clean
and dry •Aluminum is protected with a high–quality
polymer finish to protect from oxidation
Active
VHF
UHF
Boom
Order # Elements Elements Elements Length (ea.)
CA-7084
68
28
40
131" $185.99
CA-7082
50
18
32
110.5" 129.00
CA-7080
39
14
25
90"
109.00
Omni–State
Omni–Directional Antenna
#30-1660
Advantage
Series Antennas
#30-1665
The Advantage line of
antennas was designed
with the Do–It–Yourself installer in mind. All
models are UPS shippable and will fit in most any
car. Superior performance, economy, pricing, and
pre-assembled for ease of installation, make this
antenna line the perfect choice for the self-installer.
Includes balun, weather boot and S clip.
Order #
30-1635
30-1640
30-1645
30-1650
30-1655
30-1660
30-1665
Mfr. #
3020
3019
3018
3017
3016
3014
2001
Boom Length
152"
133"
113"
94"
66"
52"
27"
The Omni–State antenna
provides excellent reception
of VHF and UHF channels
in most viewing locations.
Measures 21" in diameter and
has a 20dB built–in amplifier.
Operates on 120VAC with
the supplied adaptor. Optional accessories for
installation are available.
Order #
30-1335
(ea.)
$124.95
104.81
80.43
69.83
48.63
35.36
39.74
(ea.)
$74.95
Scanner Antenna
Covers VHF/UHF public service bands
30~1300MHz. Includes 300 to 75ohm
matching transformer and 50' RG-6
coax cable.
Order #
30-1380
(ea.)
$39.95
FM
Turnstyle
•Offers the gain of a folded dipole
with an omni–directional pattern
•Works in areas where stations are
situated in many directions
Order #
30-855
(ea.)
$19.95
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
293
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
#30-1655
#PR-9032
Order #
PR-9016
PR-9018
PR-9022
PR-9032
(ea.)
$129.00
49.95
Ideal for suburban/
metropolitan area television
reception. Omni–directional
antenna with built–in
amplifier. Specifications: Bandwidth: 54~806MHz.
Gain: 20dB. Impedance: 75ohm. Power: 120VAC
via included adaptor. Diameter: 22".
#30-1640
#PR-9022
Description
Antenna
Amplifier
SMARTenna®
UHF/VHF Antenna
#30-1650
#PR-9016
Prostar 1000
UHF Antennas
The SquareShooter™ HDTV2
directional antenna by Winegard is
designed for high definition digital TV.
Because of its size and versatile
installation options, it can be mounted
practically anywhere for the best
DTV/HDTV reception such as on wall,
fascias, roofs, patios, attics, or railings.
The SquareShooter™ HDTV2 receives
HDTV signals at greater distances!
This 15" square antenna can receive
and demodulate clear analog broadcast signals up to
45 miles and outstanding DTV/HDTV signals over 50
miles from the transmit source and is ideal for the
suburban market. SquareShooter™ features:
61° beamwidth, 1.3:1 VSWR across band, 4.5db
average gain, and a 16" x 16" x 4" footprint.
C51 pg 294
7/31/06
11:37 AM
Page 294
SATV/CATV
STEALTHtenna™
UHF/VHF Antenna
Section 14
TV55 Antenna
The TV55 indoor/outdoor
amplified antenna is
optimized for
HDTV reception.
The TV55’s
helical coil technology
and patented dual–mode
ultra–low–noise amplifier
provide clear, powerful reception of
HDTV and analog VHF/UHF broadcast
signals, and its slim-profile design allows easy
mounting under a windowsill, on a rooftop, on a wall
or in any number of locations inside or outside a
home. The TV55 includes cables and weatherproof
stainless steel connectors, for easy integration with
satellite systems. The kit combines local and
satellite signals into a single RG-6 coaxial cable,
eliminating the need to run an extra wire from the
dish to the home. Accessories included: (1) power
injector with 110VAC to DC power adaptor, (1) 1⁄4-20
x 11⁄2" hex-head bolt, (1) 1⁄4-20 21⁄2" hex-head bolt, (1)
mast mount base, (2) 1⁄4-20 x 3⁄4" hex-head bolts, (1)
mast mount cover, (1) 1⁄4-20 wing nut, (2) window
mount brackets (2-piece assemblies), 1⁄4"-20 hexagon
nuts, (2) wall mount cam-lock units, (2) #10 x 21⁄2"
flat-head screws, (1) channel insert, (2) #8 x 11⁄2"
flat-head screws, (1) 93⁄4" flat coaxial cable, (2) 1⁄4"
split washers, (1) 36" RG-6 coaxial cable, (2) #10
plastic wall anchors. Mfr. #TV-55.
(ea.)
$67.95
14
Order #
30-1525
Amplified, Satellite Dish
Mounted, Clip-On TV Antenna
Many areas have great local programming but
the satellite companies charge you for that local
programming on a per receiver basis. Now you can
keep the great satellite programming you have, pick
up local HD stations not currently available from
service providers and get free local programming too
with the TERK TV44. The TV44 is an easy to install
clip on amplified antenna, which installs directly
on your existing satellite dish. So pick up the local
stations you want without picking up the extra cost.
You’ll soon realize all the advantages of a new TERK
TV44 antenna. First, it can be installed easily by
anyone. The TV44 has a patented clip on design
that attaches directly to your satellite dish without
any tools. The TV44 was developed to be weather
resistant, ensuring years of enjoyment, and its
internal amplifier minimizes signal loss for
the best reception possible.
Order #
33-9655
Mfr. #
TV-44
Channel Master ushers
in a new era for off-air
reception with the
introduction of the STEALTHtenna. Optimized
for HDTV/digital and analog reception, the
STEALTHtenna offers the performance and
aesthetics that today’s consumers demand
for their ever changing reception needs. The
STEALTHtenna is also the perfect compliment
to DBS satellite systems for reception of local
broadcast. Rear mounting bracket design allows the
STEALTHtenna to be easily installed under an eave
for an inconspicuous installation. STEALTHtenna
may also be mounted in traditional roof, chimney,
wall and attic configurations. Optional amplifier
provides split band amplification and is optimized
for HDTV/digital as well as analog signals.
Specifications: Gain: 15dB UHF, 15dB VHF/FM.
Power 12~22VDC via included adaptor.
Order #
30-1715
30-1720
Mfr. #
3010
3038
A strong stable
mounting system that
supports both DBS and
VHF/UHF antennas in
one convenient location.
Installs quickly and
easily to the side wall of
a building, and adjusts
easily to roof overhangs.
It can be wired with
back–to–back splitters so
all DBS, VHF and UHF
signals travel on one
RG-6 cable. All mounting
hardware supplied.
Order #
33-2630
Order #
30-1445
MiniMount
Order #
33-2626
A
Antenna
Mounting
Hardware
Fig. Order #
A 30-1030
B 30-1035
C 30-1045
Order Online
B
C
Description
Qty. (pkg.)
Guy wire clamp up to 11⁄2" mast 1
$3.58
Turnbuckle - 7" open, 5" closed 3
4.09
Cable clamps 1⁄2" open 1⁄8" closed 3
1.53
“J” Pipe Mount
Designed for outdoor antenna use and can be
used on the roof or side of the house. The
mount foot can be used on either end of the
pipe for most efficient mounting. •Galvanized
steel • 38" long •Wall thickness: .060" •1.66"
OD and E–Coated for maximum protection.
D
A
Order #
DS-3000
B
(ea.)
$29.95
(2-up)
$25.70
E
DBS Pipe Adaptor
C
Install a DSS, Dish Network or Prime
Star dish to any antenna mast or pipe
with this pipe adaptor. Works with
RCA, Panasonic, Echo Star and other
DSS dishes. Mfr. #QPA-1.
Order #
33-4935
•Heavy–duty mount for masts up to 11⁄2" outer
diameter •Made of all steel construction
•Triple coat corrosion protection
www.mcminone.com
(ea.)
$18.13
(ea.)
$47.95
Heavy–Duty Antenna Mounting Accessories
(ea.)
$22.17
30.25
(ea.)
$52.02
The low profile design
attaches easily to the top
of a roof mounted antenna
pipe stand, providing a
stable mounting point for
any small VHF/UHF
TV antenna.
F
NET 30
Terms
294
(ea.)
$69.95
49.95
TV42 television antennas
complement any 18"
satellite dish by receiving
all local, off–air channels.
These clip–on antennas
attach to the dish without
any tools. Internal amplifier
minimizes signal loss so
signal may be distributed
to multiple televisions.
Power is supplied to the
amplifier through the
cable by the satellite receiver. Built–in diplexers
minimize the cabling needed for the system by
combining the off–air signals with the satellite
signals. The few cables and external diplexers
needed are included with the antennas.
Specifications: Dimensions: 10.25" (H) x
21.25" (W) x 3.5" (D). Bandwidth: 54~806MHz.
Impedance: 75ohm. Amplifier gain: 20dB.
Mfr. #TV-42.
(ea.)
$54.95
•Mounts TV antennas without
guy wires •Self supporting
•Extra heavy–duty with
rotamast feature •Fits mast up
to 13⁄4" •Six screw mast support
Size
3'
5'
Description
Stealthtenna
Stealthtenna amplifier
Clip-On TV Antenna
Tripod
Roof Mounts
Order #
30-925
30-930
TennaMount
Fig.
A
B
C
D
E
F
Order #
30-895
30-900
30-905
30-910
30-915
30-1160
Description
Roof mount
4" wall mount
8" wall mount
“Z” chimney mount
“Y” chimney mount
Vent pipe mount
(ea.)
$16.29
DSS
Rear-Mount
(ea.)
$6.65
6.65
7.68
10.24
16.95
10.24
The DSS rear–mount attaches
quickly to the existing bolts
on the rear of the DSS dish
allowing for mounting of
a local broadcast antenna.
Order #
30-1520
(1-9)
$12.09
(10-up)
$10.39
C51 pg 295
7/31/06
11:38 AM
Page 295
SATV/CATV
RG-6/U Tap-In Cable Clips
Eve Mounts
Alternative to roof and chimney mounts. Fits most
any medium pitch roof. Adjusts from 43" to 60".
Accepts up to 11⁄2" masts. Includes mounting
hardware. Zinc finish.
Order #
30-1085
(ea.)
$22.17
Masts
16 gauge corrosion protected mast ideal for television
and communication antennas. 5' section swagged at
one end. 21⁄2' section ideal for use above rotator.
Order #
30-1080
30-935
Size
21⁄2'
5'
(ea.)
$3.58
6.05
Antenna Lances
Antenna lances are a quick and easy way of
mounting small antennas to attic trusses or rafters.
1" diameter to accommodate standard antenna
mounting hardware.
Order #
30-1600
30-1605
30-1610
Length
12"
18"
24"
(ea.)
$3.11
4.15
5.19
Made from UV stabilized,
non–conductive polycarbonate, these clips
are both weather and impact resistant.
Smooth, rounded edges will not cut or
abrade the cable shielding as metal
clips can. The clip is designed with
strain relief grips to hold the clip, no
need to hold the clip while installing it.
Thin hardened pins won’t chip stucco
and mortar on your customer’s house. 100 per box.
Order #
33-8635
33-8636
Mfr. #
TA-7LP
TA-7
Pin Length
7
⁄16"
5
⁄16"
Price per box
(1-9)
(10-up)
$19.95
$19.52
19.95
19.52
Section 14
Mini UHF/VHF Signal Combiners
UHF/VHF signal combiners for use with antennas
when TV has only one antenna input. Small size,
11⁄4" wide by 13⁄4" high, for use with newer
TVs with recessed “F” connector.
300ohm UHF and 75ohm VHF inputs
Order #
33-1570
(1-9)
$1.76
(10-up)
$1.06
Cable Clips
Make cable runs neat and easy. Made of
high impact plastic with plated steel
nails. Firmly attaches cable to wood,
plastic, brick, mortar or concrete block.
100 per package.
Order #
33-585
33-580
33-4745
33-4750
33-4765
33-4770
Color
Black
White
Black
White
Black
White
75ohm UHF and 75ohm VHF inputs
Order #
33-1580
Cable
(1-9 pkgs.) (10 pkgs.-up)
RG-59
$3.44
$2.82
RG-59
3.44
2.90
RG-6
3.39
2.85
RG-6
3.39
2.85
Dual RG-6
3.65
3.11
Dual RG-6
3.65
3.02
(1-9)
$1.76
(10-up)
$1.03
Push-On Balun
•Quick connect for “F” fittings with
impedance matching transformer
•Minimum five
Order #
33-010
(5-9)
$0.84
(10-up)
$0.63
Outdoor
•Weather resistant, molded plastic construction
•Supplied with rubber boot
Pitch Pad Kit
“D” Rings
•Pitch pad and lag bolt
kit •Pads reduce risk of
water leakage •Use when
mounting antennas on roof
•Contains six lag bolts
Use for attaching wires
and cables to structures
and to support cable runs
and electrical wiring.
Bright galvanized steel.
11⁄4" eyelet and 11⁄4" nail.
Order #
33-8615
(1-9)
$1.79
(10-49)
$1.74
(50-up)
$1.53
Order #
33-040
(1-4)
$2.18
(kit)
$3.06
•UHF/VHF/FM
75~300ohm matching
transformer •“F” type input, 300ohm twin lead
output •Minimum five
(10 pkgs.-up)
$1.12
Dura-Tube® Antenna Mounts
Channel Master DURA-TUBE
super alloy is the steel masting
with the double overcoat for
lasting beauty and protection.
Channel Master starts with the
finest quality high tensile steel
tubing and receives a powder
coat painted overcoat. The
end result is a super tough
weather protected mast that
is 50% stronger than high
carbon steel masting of
the same diameter.
Order #
30-1725
30-1730
30-1755
30-1765
Mfr. #
9003
9004
1607
2007
Description
3' tripod mount
5' tripod mount
5' mast, 16 GA
5' mast, 20 GA
Description
Single, white
Single, black
Dual, white
Dual, black
(1-9 pkgs.)
$4.09
4.09
5.11
5.11
(10-up pkgs.)
$3.69
3.69
4.74
4.60
SlimLine
Coupler
(ea.)
$33.66
85.00
8.69
6.11
•18 gauge, 6 strand heavy-duty guy wire •Vinyl
coated to reduce effects of weather •Length: 100'
(ea.)
$8.19
Order #
33-7430
(ea.)
$8.29
TV Line Clips
(100-up)
$0.49
•UHF/VHF/FM
75~300ohm adaptor
•“F” type input, twin
lead output •Ten per
bag, bulk packaged
Order # (1-3 bags) (4-9 bags) (10-24 bags) (25 bags-up)
33-1390 $7.50
$6.99
$6.50
$5.99
(1-9 pkgs.)
$1.24
(10-49 pkgs.)
$1.06
Order #
33-220
33-200
Input
Ohms
75
75
VHF
Ohms
75
300
UHF
Ohms
300
300
FM
No
Yes
(1-9) (10-49)
$4.09 $3.57
3.29
2.57
COAX-SEAL
•A fast and easy way to waterproof
coax fittings •Wraps around fittings
and can be molded to any shape
•Works with vinyl and poly vinyl
outer covers •Stays flexible for years
Order #
21-1140
•For antenna lead
hook–ups •High–quality
construction •For quick
connection of 300ohm twin
lead to antenna terminals
•Two per package
Order #
33-610
(10-99)
$0.59
Antenna Signal Splitters
This flat, flexible
coupler allows you to run cables into a house or
apartment without drilling holes in the house of
window frame. Simply put the cable through the
window and close, the coupler will bend easily
around the window pane.
Guy Wire
Order #
30-1055
Cable feed-thru bushings give cable and satellite
installations a finishing touch. Available in single
and dual construction, white or black.
100 per package.
Order #
33-4815
33-4820
33-4825
33-4830
(5-9)
$0.69
Economical Indoor
Matching Adaptor
Feed-Thru Bushings
(1-9 pkgs.)
$1.59
(50-up)
$1.39
(1-9)
$3.49
(10-24)
$3.16
(25-49)
$2.95
NET 30
Terms
(50-99 pkgs.)
$0.85
OrderToll
Toll
Free
Order
Free
Fax
FAX
295
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
U-Bolts
Order #
30-1515
(10-49)
$1.71
Indoor
Order #
30-940
Order #
33-050
Connects antennas or
mast to bracket. Use
with mast pipe up to
11⁄4". One per package.
(5-9)
$2.04
C51 pg 296
7/31/06
11:39 AM
Page 296
FM Dipole Antennas
SATV/CATV
These high quality FM
dipole antennas can be
used for many newer
FM tuners and
receivers. Available in
three configurations:
300ohm spade
terminals, 75ohm male “F” connector and 75ohm
female PAL connector. These antennas are
constructed from high quality 300ohm twin–lead
and perform significantly better than the OEM
supplied straight wire or a split two conductor
antennas providing higher quality FM reception.
Section 14
High-Power Amplified
Indoor TV Antenna
•Amplifies up to
45dB with signal pass to
avoid signal saturation;
3-stage amplifier •39"
retractable dipoles adjust
for best reception •UHF
loop tilts 180° and rotates
360° •Integrated 3-way
switch for switching
between antenna and
cable or satellite
•Integrated hook-up cable; low noise insertion loss
•No assembly required •Isolated dual UHF and VHF
gain controls •Noise filtration
Order #
ANT1250
(ea.)
$48.50
Order #
30-1530
30-1535
30-110
Description
Male “F” connector
Female PAL connector
Spade terminals
(1-9)
$1.55
1.52
1.24
(10-up)
$1.03
1.01
1.16
•Popular replacement
AM antenna used on
most stereo receivers
•181⁄2" lead length
•300ohm impedance •Antenna has two pin
quick connect for equipped systems •For systems
with push terminals or screw terminals, simply
cut and strip the ends of the antenna wire for
your application
(1-9)
$3.35
(10-up)
$3.13
Indoor Antenna
•Digital TV compatible
•VHF/UHF/FM •39"
retractable dipoles adjust
for best reception •UHF loop
•6' 75ohm hook–up cable with
screw–on “F” connector
The TV5 antenna is a
perfect primary set-top
antenna in suburban or outlying areas. TV5 combines
a high-performance amplified antenna with a
low-profile design that fits on top of any television,
and even fits inside most television cabinets. TV5
features TERK’s unique Complementary Symmetry
technology, incorporating a pair of tuned receiving
elements for excellent reception range and clarity.
TV5’s low-noise broadband amplifier features a
simple one-touch adjust for all stations, and TERK’s
patented selectable amplifier bypass prevents
over-modulation of stronger incoming signals. The
integrated video selector switches between the
antenna and any video component such as a DVD,
VCR or video game at the touch of a button, without
having to change any connections. TERK’s indoor
television antennas are engineered with premium
materials resulting in a durable, high-performance
antenna that will look great on any TV for years
to come. Mfr. #TV-5.
14
Indoor Antenna
•VHF/UHF/FM •36" retractable
dipoles •UHF loop included •36"
300ohm hook–up cable •Includes
300/75ohm matching transformer
•Detachable base
Order #
ANT110
(ea.)
$5.19
Order #
30-1395
(ea.)
$39.95
Order #
30-1560
(ea.)
$39.95
FM PRO 50
FM PRO is the clear choice for the FM enthusiast.
Designed to provide exceptional long-range FM
reception, it may be mounted indoors or outdoors for
a totally unobstructed installation. #30-1205 has a
weather-proof housing and is easily installed in an
attic, exterior side of the home or indoors in a closet,
garage or interior wall. New Advanced Capture
Circuitry™ (ACC) ensures that strong signals are
locked in and weaker broadcasts are received with
less noise. Terk’s exclusive Dual Drive Amplifier
boosts signals above noise and interference, using a
DC–driven phantom power supply that is easily
connected to your receiver.
Order #
30-1205
TV5
(ea.)
$9.42
The AM Advantage
antenna is a passive, fully
adjustable indoor AM
antenna designed for
extended range capability.
The antenna is intended
to receive AM frequencies
530KHz~1600KHz for
local and distant AM reception. The antenna
features Pin–Dot™ Pre Tuning system which allow
the user to adjust the antenna and match it to the
specific frequency. Mfr. #ADVANTAGE.
AM Loop Antenna
Order #
30-660
Order #
ANT1020
AM Advantage
(2-4)
$39.09
(5-up)
$36.00
(ea.)
$95.95
AM/FM TOWER
This newly designed antenna solves
reception problems in urban high–rise
or suburban environments. Positioned
vertically, the tower receives signals
from all directions with equal strength.
Used horizontally, it becomes highly
directional to pull in weaker and more
distant stations. It also distinguishes
between signal reflections and the
main signal to eliminate overload and
multipath difficulties. Specifications:
FM stereo section: •Amplifier gain:
Variable 0dB~25dB •Impedance: 75ohm
adaptable to 300ohm input with included
matching transformer •FM operating
band: 88~108MHz AM stereo section:
•AM operating band: 500~1700KHz
•AM gain: 15dB •Range: 360° 17" (H) x 31⁄4" (W)
Order #
30-1110
(10-up)
$17.95
TV4
VHF/UHF/FM
Indoor Antenna
•44" black,
retractable VHF
dipoles •Adjustable
UHF tuning loop
•4' coaxial cable
for easy hook-up
•Matching
transformer to connect to cable ready TV •Twin lead
connectors to attach to TV •Useful for all screen sizes,
particularly over 19"
Order #
MANT250
(ea.)
$29.20
NET 30
Terms
296
(1-9)
$19.95
Order Online
www.mcminone.com
The TV4 low-profile
antenna is a perfect
set-top antenna for use
in urban or suburban areas. TV4 combines a
high-performance antenna with a low-profile design
that fits on top of any television, and even fits inside
most TV cabinets. TV4 features TERK’s unique
Complementary Symmetry technology, incorporating
a pair of tuned receiving elements for excellent
reception range and clarity. TV4’s revolutionary
design allows the antenna to stand less than 43⁄4
inches high while delivering outstanding reception.
Unlike the frustrating trial and error method of
adjusting conventional antennas, a simple rotation
obtains optimum reception. TERK’s indoor television
antennas are engineered with premium materials
resulting in a durable, high-performance antenna
that will look great on any TV for years to come.
Order #
30-1565
(ea.)
$14.95
(2-4)
$14.37
(5-up)
$13.34
AM/FM Q
The AM/FM Q is TERK’s
premium amplified indoor
AM/FM antenna. The
AM/FM Q features a
host of advanced
technologies for
exceptional antenna
performance, such as
TERK’s unique
Pin-Dot Pre-Tuning
that zeroes in on even
hard-to-get stations by tuning the antenna to the
station’s frequency. The AM/FM Q is easy to install
and use and its compact, stylish high-tech design
complements any home entertainment installation.
Mfr. #AF-1.
Order #
30-1550
(ea.)
$59.95
(2-4)
$57.95
(5-up)
$54.95
C51 pg 297
7/31/06
11:40 AM
Page 297
Order #
30-1570
SATV/CATV
Deluxe TV Antenna
TV3
The TV3 antenna is a perfect
primary or secondary set-top
antenna in suburban or
outlying areas. TV3 offers
the performance of a high
quality amplified rabbit ear
antenna with the convenience
of an integrated video switch,
creating a one-cable solution
for a video game, DVD player, VCR or other video
component. A 75ohm coaxial cable and 75~300ohm
matching transformer are included to ensure
compatibility with any television set, and a non-skid
silicon base adds maximum stability. The TV3’s
low-noise broadband amplifier boosts weaker signals
for maximum reception range and clarity. The
amplifier features one-touch adjustment for all
stations, and TERK’s patented selectable amplifier
bypass prevents over-modulation of stronger incoming
signals. TERK’s indoor television antennas are
engineered with premium materials resulting in a
durable, high-performance antenna that will look
great on any TV for years to come. Mfr. #TV-3.
(ea.)
$29.95
(2-4)
$28.79
(5-up)
$25.70
•Perfect for use behind
entertainment centers
•Fine tune adjustment
for optimum TV reception
•Opens flat to mount on
wall •Hanger included
•Folds to 90° for set top use
Order #
30-830
Section 14
Rabbit Ear Antenna
(ea.)
$6.89
•VHF and FM antenna
with 300ohm twin lead
and spade terminals
•Three section antennas
telescope to 30" each
Order #
30-575
(1-9)
$3.02
(10-up)
$2.07
High-Tech TV Antenna
•UHF/VHF operation
•Sleek, high-tech styling
complements any room decor
•Fine tune adjustment to
optimize reception
Order #
30-835
(1-9)
$8.11
UHF/VHF TV Antenna
•Dipoles extend to 30"
•Dual UHF loops •Brass
with polished chrome
finish •Black base with
33" lead length
(10-up)
$7.30
Order #
30-655
(1-9)
$5.07
(10-up)
$4.17
Replacement Swivel Rod Antenna
Replacement Antenna Dimensions Key:
•A The collapsed length of the aerial including foot
and tip
•B The length of the extended aerial including foot
and tip
•Ø The diameter
Popular Antenna
•Used in: Aiwa, Continental, Hitachi, JVC,
National Panasonic, NEC, Palladium, Saba, Sanwa,
Sanyo, Sharp, Shebro, Siemens, Teleton, Toshiba,
Universum •Dimensions: A = 345mm; B = 1235mm;
Ø = 6.0mm
Order #
APTA6
(1-4)
$5.14
Popular style antenna is commonly used on
portable radios, televisions and similar items. 1⁄4"
diameter rod is 9.3" in length when collapsed, and
extends to 31". Swivel base has a 3mm threaded
hole for mounting.
Order #
30-392
(1–3)
$2.49
(4–9)
$2.15
(10–up)
$1.84
(5-up)
$5.05
14
Replacement Antenna
Original Sony Antenna
•Used in: Audio-sonic, Continental, Crown, Fisher,
Hitachi, ISP, ITT, JVC, National Panasonic, Orion,
Palladium, Philips, Sanwa, Sanyo, Sharp, Sony,
Technics, Telefunken, Universum •Dimensions:
A = 204mm; B = 975mm; Ø = 6.0mm
Sony #1-501-386-11 and #1-501-388-11. Used in
models #CFS-D550, CFS-D305, CFS-DW34,
CFS-D30 and others. Two sections. Extended 24",
collapsed 13" and base diameter 3⁄8".
Order #
APTA2
(1-4)
$4.64
(5-up)
$4.41
Sanyo, Sony, Toshiba Type Antennas
•Dimensions: A = 306mm; B = 1076mm; Ø = 6.0mm
Order #
APTA16
(1-4)
$5.14
(5-up)
$5.05
Replacement Antenna
•Used in: AIWA, Crown, Elite, Goldstar, Hitachi,
ITS, ITT, JVC, Loewe Opta, National Panasonic,
NEC, Nordmende, Orion, Palladium, Philips, Saba,
Sankyo, Sanwa, Sanyo, Sharp, Schmid, Siemens,
Sony, TEC, Telefunken, Teleton, Tensai, Toshiba,
Waltham •Dimensions: A = 230mm; B = 953mm;
Ø = 6.0mm
•Used in: Aiwa, Continental, Crown, Fisher, Hitachi,
ISP, ITS, ITT, JVC, Loewe Opta, National Panasonic,
NEC, Nordmende, Orion, Palladium, Philips, Poppy,
Saba, Sanwa, Sanyo, Sharp, Shebro, Siemens, Sony,
Teleton, Tensai, Toshiba, Unisef, Universum,
Weltfunk •Dimensions: A = 273mm; B = 954mm;
Ø = 6.0mm
(1-4)
$3.83
(5-up)
$3.76
Order #
APTA5
(1-4)
$4.64
(ea.)
$10.98
Original JVC Rod Antenna
Replacement Antenna
Order #
APTA3
Order #
30-1180
Order #
Mfr. #
Extended Base Diameter
Extended Sections Length Length Length (ea.)
5
32-6970
6
321⁄2"
73⁄4"
⁄16" $12.03
VJA3006-00E
1
3
5
32-6970
6
32 ⁄2"
7 ⁄4"
⁄16"
12.03
VJA3006-00D
(5-up)
$4.54
UHF Bowtie
•Replacement UHF bowtie antenna
•26" lead length
Order #
30-300
Panasonic Type Dual Antenna
•Replacement antenna for Panasonic, RCA, JC
Penney, Quasar and various private brand TV
sets •Five section •91⁄2" collapsed •39" extended
•21" lead length
Order #
30-060
(1-9)
$6.12
(10-up)
$5.91
(1-9)
$1.29
(10-up)
$0.98
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
297
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C51 pg 298
7/31/06
11:41 AM
Page 298
SATV/CATV
Section 14
VideoEase™ HDTV
Component
Video/Digital Audio Balun
The component video/digital audio balun allows one
component video (YPbPr or RGB) signal and one
digital audio signal to be transmitted via
cost-effective unshielded twisted pair (UTP) cable
in a point-to-point configuration. Used in pairs, the
component digital balun supports 480i/p, 720p and
1080i/p video formats for hi-definition (HDTV) video
applications. Features: •Supports 480i/p up to 1000'
(305m) and 720p/1080i/p up to 500' (152m) via cat 5
UTP, respectively •Molded, color-coded RCA cable
connectors •Supports digital audio on fourth twisted
pair with female RCA connector on back of balun
•Modular shielded RJ-45 connector
Order #
33-10060
Mfr. #
500050
(ea.)
$99.00
Videoease PS/2
Convertor Balun
Videoease Active VGA Balun Kit
•Extends the distance between the computer system
unit and a remote display monitor by up to 480' •It
accomplishes this by means of a local transmitting
unit, and remote receiving unit, connected by
standard Category 5 twisted pair ethernet cable
Features: •Uses category 5 ethernet cable: For
economy; easy installation; and utmost data transfer
reliability •High resolution video: Up to 1800 x 1440
at 100 meters •Supports VGA and SVGA monitors
•Long distance transmission, up to 160m (480')
•Local unit includes port for local monitor
Order #
33-10120
Mfr. #
500035
(kit)
$460.00
•Allows PS/2 devices to be located up to 350'
away from the PC •Using inexpensive 4-pair Cat5
shielded twisted pair or unshielded twisted pair
cable depending on the equipment used •Used
in pairs, both the #33-10100 and 33-10105
baluns eliminate the need for a local keyboard
and mouse •Typical applications include corporate
projection systems, classroom video instruction
and video information systems
Order #
33-10100
33-10105
Description
PS/2 PC side
PS/2 remote PS/2 side
Mfr. #
500046
500045
(ea.)
$35.00
35.00
14
RGB Baluns
The VideoEase
RGB Balun allows a
single red/green/blue
component video signal
to be transmitted via
unshielded twisted
pair (UTP) cable in a
point–to–point connection. The RGB balun eliminates
three coaxial cables, allowing RGB audio/video
equipment to be connected via space–efficient and
cost–effective Category 5 twisted pair cable. The
RGB balun works with RGB equipment that carries
the synchronisation pulses on one of the three color
signals (ie; sync on green). The RGB balun works
with LCD projectors, monitors, plasma screens,
matrix switchers, splitters, convertors and RGB
video equipment and comes with three separate
coaxial jumpers for ease of installation. Features:
Up to 2200' (670m) in color via Cat 5 UTP. Pair
required for use, sold individually.
Order #
33-9595
(ea.)
$109.00
VideoEase™
Component
Video Balun
The VideoEase™
Component Video
Balun allows a single component video signal (Y, Pb,
or Pr) to be transmitted via cost-effective unshielded
twisted pair (UTP) cable. Three balun pairs are
required for one complete component (YPbPr) video
connection. The product allows three coaxial cables
to be replaced by one Category 5 twisted pair cable,
allowing standard structured cabling techniques to be
used for neater and more streamlined cabling. The
component video balun is compact enough to allow
three units to be connected side by side on the back
of the component video equipment. Features and
benefits: •Supports one component of the YPbPr
video signal •Three balun pairs required per YPbPr
connection •Up to 1,000' (305m) via Cat 5 UTP
•Gold-plated connector •Cable strain relief •Compact
design •Lifetime warranty •Design patent pending
Order #
33-9755
Mfr. #
500021
(ea.)
$34.95
NET 30
Terms
298
Order Online
www.mcminone.com
Videoease Quad Video Balun
VGA Balun
The VideoEase VGA Balun
eliminates costly and bulky VGA cable, allowing a
VGA source to be connected to a VGA monitor via
4-pair Cat 5 shielded twisted pair or unshielded
twisted pair cable depending on the equipment used.
Used in pairs, the VGA balun allows VGA video to be
transmitted up to 450' (137m) via Cat 5 at resolution
640 x 480 pixels. The VGA balun is sold in three
connector configurations; 500010, 500011 and
500014, depending on whether the balun is
connecting to a VGA source (500010) or to a VGA
display. The VGA baluns work in conjunction with
laptops, PCs, CRT and flat-screen LCD monitors and
multimedia projectors. Typical applications include
corporate projection systems, classroom video
instruction and video information systems.
Order #
33-9600
33-9605
33-9730
Mfr. #
500010
500011
500014
Description
PC side
Monitor side female
Monitor side male
(ea.)
$99.95
99.95
99.95
Stereo A/V Balun
The VideoEase
Stereo Audio/Video
Balun allows a
single composite
video signal and
a maximum of
two unbalanced
audio signals to be
transmitted via unshielded twisted pair (UTP)
cable in a point–to–point connection. The Stereo
Audio/Video Balun eliminates up to three coaxial
cables, allowing audio/video equipment to be
connected via space–efficient and cost–effective
Category 5 twisted pair cable. The Stereo Audio/Video
Balun also works in conjunction with MuxLab’s
Audio/Video Distribution Hub (500200) allowing
audio/video programming to be distributed via UTP.
Features: Up to 2200' (670m) in color via Cat 5 UTP.
Pair required for use, sold individually.
Order #
33-9625
Mfr. #
500001
(ea.)
$82.95
•Developed for the security video and audio-video
markets, the quad video balun allows up to four
composite video channels to be transmitted over one
Cat5 cable, thus replacing up to four coaxial cables
for more cost-efficient cabling •Supporting composite
video up to 2,200' (670m) via Cat5 cable and works
in pairs •Streamlining cabling in applications such
as security video, video-conferencing, classroom
instruction, tradeshow demos, PC-training, airline
information systems and home entertainment
systems •Used in pairs, sold individually
Order #
33-10110
Description
Quad VGA balun
Mfr. #
500032
(ea.)
$82.50
Dual Audio/
Video Balun
The VideoEase
Dual Audio/Video
Balun allows up
to two composite
video signals
and up to two
unbalanced
audio signals to be
transmitted via unshielded twisted pair (UTP)
cable in a point-to-point connection. The Dual
Audio/Video Balun eliminates up to four coaxial
cables, allowing audio/video equipment to be
connected via space-efficient and cost-effective
Category 5 twisted pair cable. The Dual Audio/Video
Balun also works in conjunction with MuxLab’s
Audio/Video Distribution Hub (500200) allowing
audio/video programming to be distributed via
UTP to up to eight locations. Features: Up to 2200'
(670m) in color via Cat 5 UTP. Pair required for use,
sold individually.
Order #
33-9610
Mfr. #
500012
(ea.)
$82.95
C51 pg 299
7/31/06
11:42 AM
Page 299
SATV/CATV
#33-9585
S-Video Baluns
#33-9590
The VideoEase S-Video Balun allows a single S-video
signal to be transmitted via unshielded twisted pair
(UTP) cable up to 1000' (305m) in a point-to-point
connection. The product is available in two models;
the S-Video Balun (500016) and the S-Video/Audio
Balun (500017). Used in pairs, the S-Video Balun
eliminates costly and bulky S-video cable, allowing
S-video equipment to be connected or moved to any
convenient modular outlet. The S-Video Balun also
works in conjunction with MuxLab’s Audio-Video
Distribution Hub (500200) to allow S-video
programming to be distributed via UTP. Some of
the applications are; classroom video distribution,
commercial and home audio/video systems, hospital
video training, video conferencing, and video kiosks.
Note: Baluns must be used in pairs and are
sold individually.
Order #
33-9585
33-9590
Mfr. #
500016
500017
Description
S-Video
S-Video and Audio
(ea.)
$34.95
79.95
CATV Balun
Order #
33-9630
Mfr. #
500302
(ea.)
$59.95
VideoEase™
Audio Balun
The VideoEase™
Audio Balun
allows any
unbalanced analog audio signal to be transmitted via
a single unshielded twisted pair (UTP) cable for more
versatile cabling. Used in pairs, the audio balun
eliminates costly and bulky coax cable, allowing
consumer and commercial audio equipment to be
connected using standard premises wiring techniques.
One or two pair of baluns are required depending on
whether the application is for monaural or stereo
audio. The audio balun features screw terminals
and built-in cable strain relief for ease of installation
and reliable connectivity. Applications include
auditoriums, arenas, schools, home theater systems,
airports, hotels, hospitals, conference rooms.
Features and benefits: •Eliminates coax cable
•Up to 5,000' (1.5km) via Cat 5 UTP •20~20KHz
bandwidth •Gold-plated RCA connector •Cable
strain relief •Compact design •Lifetime warranty
•Design patent pending
Mfr. #
500019
(ea.)
$34.95
The VideoEase™ CCTV
Pass-Thru Balun allows
video, two-wire PTZ control, and
remote power to be transmitted via one 4-pair cat 5
cable, thus eliminating the need to install multiple
cables for more efficient cabling in the CCTV security
and surveillance environment. The pass-thru balun
may be used in pairs, or in conjunction with standard
twisted pair cross-connect devices and other MuxLab
CCTV baluns such as the 500000, 500009, 500023 and
500015. Features: •Combines video, PTZ control and
remote power under one 4-pair cat 5 cable for more
efficient cabling •Video up to 2,200' (670m) via cat 5
UTP •Remote power up to 350' (106m) @ 24VAC/5VA
via two twisted pairs
Order #
33-10065
Mfr. #
500022
(ea.)
$39.00
VideoEase™
CCTV Mini Balun
The VideoEase™
CCTV Mini Balun
allows a single
CCTV video signal
to be transmitted via
cost-effective unshielded twisted pair (UTP) cable.
Used in pairs, the CCTV balun eliminates costly
and bulky coaxial cable, allowing CCTV security
and surveillance equipment to be connected using
standard structured cabling techniques for neater
and more streamlined cabling. The flexible mini
coax cable lead allows the product to fit neatly
inside CCTV camera back boxes and dome
camera enclosures. The CCTV balun also works in
conjunction with other MuxLab CCTV baluns such
as the 500000, 500009 and 500015 for a complete
cabling solution. Features and benefits: •Fits inside
CCTV dome cameras and back boxes •Compatible
with other MuxLab CCTV baluns •Up
to 2200' (670m) via Cat 5 UTP •Cable strain relief
Order #
33-9760
Mfr. #
500023
(ea.)
$36.95
Video Balun
The VideoEase CCTV balun
allows a single CCTV video
signal to be transmitted via
cost effective unshielded
twisted pair (UTP) cable. The CCTV balun eliminates
costly and bulky coaxial cable, allowing CCTV security
and surveillance equipment to be connected using
standard structured cabling techniques for neater
and more streamlined cabling. The CCTV balun is
available in two models; CCTV Screw Terminal Balun
(500009) and Modular CCTV Balun (500000). Both
models may be used interchangeably. Features: Up to
2200' via cat 5 UTP, low return loss, lifetime warranty.
Pair required for use, sold individually.
Order #
82-9485
82-9490
Mfr. #
500000
500009
Description
Modular
Terminal
Audio/Video Hub
The VideoEase Audio-Video Hub allows up to two
baseband composite or one S-video signal and up to
two audio signals to be distributed to up to eight
destinations via twisted pair (UTP) cable for more
cost-effective and versatile cabling. The Audio-Video
Hub when used in conjunction with MuxLab’s line
of VideoEase baluns, allows coaxial cable to be
eliminated between the audio-video source and the
destinations. The product works with the CCTV
Baluns (500000, 500009), Stereo Audio-Video Balun
(500001), Dual Audio-Video Balun (500012) and
S-Video Baluns (500016, 500017). A looping output
allows the source input to be distributed to other
baseband audio/video equipment including matrix
switchers, multiplexers, VCRs and monitors.
Applications include: Classroom audio/video
instruction, corporate audio/video presentations,
tradeshow demonstration systems, CCTV security and
surveillance. Features: Up to 2200' in color via Cat 5
twisted pair cable. 2-year warranty.
Order #
33-9615
Mfr. #
500200
(ea.)
$649.00
VideoEase
LongReach™
The VideoEase
LongReach™ is
an active CCTV
receiver balun
that provides extended distance between the CCTV
camera and the DVR or multiplexer via copper
twisted pair cable. The LongReach™ features
automatic image adjustment for picture brightness,
sharpness and contrast, thereby helping to reduce
on-site service calls. The LongReach™ supports up
to 5,000' (1,5 km) via Category 5 twisted pair cable
when used in conjunction with MuxLab’s passive
CCTV baluns (500000 and 500009). Features and
benefits: •Automatic image adjustment helps
eliminate service calls •Up to 5,000' (1.5km)
via Cat 5 UTP •Connects directly to the DVR,
multiplexer or switcher •Works with MuxLab passive
CCTV baluns •Eliminates the need for fiber or coax
•Supports NTSC or PAL •Requires 24VAC (not
supplied) •Ground loop blocking •Voltage surge
protection •Auto-resettable fuse •LEDs for power,
video and ground loop fault •Cable strain relief
•1 year warranty
Order #
33-9735
(ea.)
$34.95
34.95
Mfr. #
500015
(ea.)
$250.00
#33-10055
VideoEase™ MonoPro™ XLR
The MonoPro™ XLR connectors allow a standard AES analog or
digital audio channel to be connected via category 5 unshielded
twisted pair cable (UTP) in the professional audio environment. The
product features rugged cable strain relief and comes with locking
XLR3 connectors for added cabling versatility. Features: •Rugged
cable strain relief •Line analog audio up to 5,000' (1.5km) via cat 5
•Digital audio up to 1,400' (426m) via cat 5 •Wires terminate inside
product •Locking XLR3 connector •Optional wire terminal for
ground/shield (if required) •Up to 5,000' and 1,400' via cat 5 for
analog or digital audio, respectively.
Order #
Mfr. #
Description
(ea.)
NET 30
33-10050
500025
MonoPro™ XLR male
$35.00
Terms
33-10055
500026
MonoPro™ XLR female
35.00
OrderToll
Toll
Free
Order
Free
Fax
FAX
299
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
The
VideoEase
CATV
Balun allows
traditional
75ohm
coaxial cable
to be replaced by a single pair of Cat 5 UTP cable
in the CATV, VHF and FM environments in certain
applications. The CATV Balun allows broadband
CATV equipment to be integrated into structured
cabling systems thereby allowing CATV equipment
to be moved or added to any convenient modular
wall outlet. The VideoEase CATV Balun provides
a versatile cabling solution for broadband video
systems used by schools, government, corporations,
hospitals, financial institutions, hotels and convention
centers. The CATV Balun works in conjunction
with CATV splitters, amplifiers and cable modems
for a total cabling solution. Features: Low return
loss eliminates “ghosting”. Pair required for use,
sold individually.
Order #
33-9745
Section 14
VideoEase™ CCTV
Pass-Thru Balun
C51 pg 300
7/31/06
12:16 PM
Page 300
SATV/CATV
Section 14
Component
Audio/Video
HDTV
Distribution
Amplifier with
Digital Audio
#33-10255
#33-10256
Audio/Video Distribution
Hub and Receiver
Distribute high definition component video and
digital or left or right audio over extended distances
using Cat5e wire. Video and audio loop output to
accommodate future expansion to additional Cat5e
transmitters and receivers. Supports 1080i video up
to 300' with Cat6. Transmitter features: •Active
amplification ensures high-quality •Discrete passive
IR channel for external remote controls •Two RJ-45
outputs for additional location. Receiver features:
•Cable length equalizer for long distances •Video
continuity LEDs to ensure all signals are
transmitting •IR output
Order #
33-10255
33-10256
Mrf. #
Cat5TX
Cat5RX
Description
Transmitter
Receiver
Component Video
Distribution Amplifier
Allows for
multiple signal
distribution
equal to source signal input. Distribute digital/HDTV
and analog television signals, including digital audio
and composite video from a single A/V source to five
televisions/receivers, or use one port as a loop-thru
output port to cascade additional distribution
amplifiers. Features: •Component video (Y, Pr, Pb,
or Y, Cr, Cb), composite video and SPDIF digital audio
distribution •Compatible with all HDTV, digital
and analog signals •High bandwidth (>50MHz)
performance, low distortion, and one-to-one signal
ratio ensures equal picture quality •Power: 9~10VAC,
500mA adaptor included •Mfr. #AV501HD
Order #
33-10086
Allows for multiple signal distribution equal to
the source signal input. Four-way audio/
component-video distribution amplifier for Y,
Cb, Cr and Y, Pr, Pb applications. Features high
performance, low distortion and true one-to-one
signal ratio. These professional grade amplifiers are
cascadable for use in large displays and are enclosed
in metal housings to reduce interference.
Mfr. #AV400COMP.
Order #
33-7050
(ea.)
$119.00
(ea.)
$159.00
S-Video
Distribution Amplifier
(ea.)
$109.00
129.00
Allows for multiple signal distribution equal to
the source signal input. Four way audio/video
distribution amplifier with S-video inputs and
outputs. Features high performance, low distortion
and true one-to-one signal ratio. These professional
grade amplifiers are cascadable for use in large
displays and are enclosed in metal housings to
reduce interference. Mfr. #AV400SV.
14
Order #
33-7045
(ea.)
$99.95
Component Audio/Video HDTV
Distribution Amplifier with Digital Audio
Component Audio/Video
HDTV Distribution Amplifier
Allows for multiple signal distribution equal to source
signal input. Distribute digital/HDTV and analog
television signals from a single A/V source to nine
televisions/receivers, or use one of the output ports
to cascade additional distribution amplifiers.
Features: •Component video (Y, Pr, Pb) and audio
distribution •Compatible with all HDTV, digital and
analog signals •High performance, low distortion,
one-to-one signal ratio ensures equal picture quality
•Unlimited cascade capability. •Mfr. #AV901COMP
Order #
33-10080
(ea.)
$159.00
Allows for multiple signal distribution equal to source
signal input. Distribute digital/HDTV and analog
television signals, including digital audio and
composite video from a single A/V source to nine
televisions/receivers, or use one port as a loop-thru
output port to cascade additional distribution
amplifiers. Features: •Component video (Y, Pr, Pb, or
Y, Cr, Cb), composite video and SPDIF digital audio
distribution •Compatible with all HDTV, digital and
analog signals •High bandwidth (>50MHz)
performance, low distortion, and one-to-one signal
ratio ensures equal picture quality. Power: 9~10VAC,
500mA adaptor included. Mfr. #AV901HD.
Order #
33-10090
(ea.)
$239.00
High Performance
Distribution Amps
These high performance distribution amplifiers
feature specifications such as a true one-to-one ratio,
no signal loss, low noise, low distortion and
unity gain.
Order #
33-6875
33-6880
Mfr. #
AV400
AV700
Outputs
Four
Seven
(ea.)
$64.95
79.95
Component Audio/Video HDTV Switch with Digital Audio
Allows the connection of up to four HD A/V sources (e.g., VCR, DVD, digital receiver,
set-top-box) to two common sets of output jacks. The common output jacks can be used to
drive two TVs, or one TV and one VCR recorder, for example. Features: •Component video
(Y, Pr, Pb) •SPDIF digital or analog audio •Compatible with all HDTV, digital and analog
signals •High bandwidth (>50MHz) performance, low crosstalk, and one-to-one signal ratio
ensures equal picture quality •IR remote control included Power: 9~10VAC, 500mA adaptor
included. Mfr. #SW401HD.
NET 30
Terms
300
Order Online
www.mcminone.com
Order #
33-10095
(ea.)
$159.00
C51 pg 301
7/31/06
1:16 PM
Page 301
SATV/CATV
Picture in Picture System
Front
Back
A/V Distribution Amplifier/Selector
Tabletop distribution amplifier allows selection
between two A/V inputs and provides up to four
outputs. Independent left and right audio signal
paths allow compatibility with stereo sources
including CD/DVD players, VCRs, video games and
satellite receivers. Front panel pushbutton selects
between two input sources, and internal amplifier
maintains signal quality when distributed to four
outputs. Gain at each output is 2dB over input signal
level. Rugged metal enclosure measures 15⁄8" (H) x
7" (W) x 27⁄8" (D), including non–skid rubber feet.
Color–coded input/output connections are RCA type
female. Requires 12VDC, AC adaptor included.
Order #
30-1376
(1-3)
$26.29
(4-up)
$24.43
Audio/Video Amplifers
Order #
32-4430
32-4435
Description
Four-way
Six-way
(ea.)
$29.95
39.95
Volume
Regulator
The TERK
TV Volume
Regulator
(VR-1) delivers a consistent, quality audio level while
channel surfing or changing between A/V sources,
without adjusting the volume. The VR-1 features
Advanced Digital Signal Processing technology
that automatically adjusts sound levels without
introducing additional noises. In the VR-1, Noise
Reduction technology automatically reduces any “hiss”
already present in audio. This clarifies whispers and
articulates quiet scenes to a level that you can enjoy.
Its Dual-Band Automatic Gain Control adjusts bass
and treble signals separately for improved dialog.
With response as quick as .002 seconds, the VR-1
delivers consistent audio levels when sudden loud
noises such as explosions are present. The VR-1 is
easy-to-install and is compatible with any A/V device.
Its compact design allows for out-of-sight installation.
Consumers adjust the volume as much as twenty five
times an hour. TERK’s TV Volume Regulator allows
you to focus on the entertainment and not the volume
control. Once installed, you can set the VR-1 to your
desired level and enjoy quality audio. The VR-1
automatically matches the volume of commercials to
the program level, eliminating those sudden, loud
noises that disturb the household or neighbors. By
making dialog more intelligible and reducing blaring
music or sound effects, the VR-1 is a great solution for
the home theater enthusiast.
Order #
33-9635
Mfr. #
VR-1
(ea.)
$39.95
Order #
80-3771
(ea.)
$139.00
Section 14
Video Ground Loop Isolator
Ground loops in video systems can cause video noise
such as herringbone and beat. The ground loop
isolator easily connects between a video source and
video input, such as a DVD and television.
Order #
33-6926
(3-up)
$36.00
Composite Video to
S-Video Adaptor
Multi-System Digital Convertor
Ideal for anyone traveling overseas. This convertor
allows the user to convert between the most common
world television formats. Simply connect between
the “video line out” on source and “video line in” on
TV, VCR or monitor. Compatible with today’s digital
televisions and VCRs, the Digital Multi–System
convertor offers professional quality for duplication
or viewing of tapes. Full field conversion and digital
processing ensures a clean and stable picture. The
convertor will automatically detect the format of the
signal present, NTSC 3.58, NTSC 4.43, PAL and
SECAM. Output is manually selectable NTSC 3.58
or PAL. VCR must match the format of the tape
being viewed.
Order #
32-5540
(1-2)
$39.95
(ea.)
$269.00
This high quality adaptor
converts composite video to
S–video and S–video to
composite video. With a male S–VHS connector on one
end and a female RCA type connector on the other
(#33-0001), only a standard RCA type video cable is
required for connection or you can match the S-video
adaptor to your cables. The adaptor measures only
13⁄4" long and 1⁄2" in diameter allowing it to plug
directly into the equipment and solves the problems
associated with mixing composite and S–video inputs
and outputs. Note: This unit is a passive device and
although it will allow composite video signals to be
used in S–video inputs the signal will remain the
quality of composite video.
Order #
33-0001
33-0002
33-0003
Description
S male to RCA female
S female to RCA female
S female to RCA male
(ea.)
$7.39
5.99
5.99
(2-up)
$7.10
5.77
5.77
14
•Perfect for in–store display demonstration walls or
karaoke display •One input distributes four or six
amplified outputs •Video and stereo sound input
via RCA jacks •Four or six outputs, video and
stereo sound via RCA jacks •Frequency range:
•20Hz~10KHz •Isolation: 30dB minimum •Video
input: 75ohm •Audio input: 20Kohm •Operates from
15V/300mA adaptor •Adaptor included
View two pictures on your television screen at
the same time using your VCR or other program
source. Real time high resolution picture in picture
display. Select from four sub–picture sizes and eight
frame colors. Position the sub–picture in any of
nine locations on the screen. One touch swab of the
main and sub–picture. Stereo sound on main
and sub–pictures.
Remote Control Audio/Video Selector
This switcher can handle almost any consumer
audio/video device you can throw at it. With the most
common audio and video inputs; S-video, composite
video, toslink digital audio and line level audio, you
can connect your DVD, satellite receiver, VCR or
game system to your home entertainment system.
The switcher has three audio/video inputs and one
audio/video output and an ultra thin
remote control.
Order #
33-7755
(ea.)
$59.95
(2-4)
$58.50
(5-up)
$57.17
S–VHS A/V Switch
S–VHS A/V selector
switch for use with DSS,
DVD and other video
products with Y/C (S–VHS) outputs. Four Y/C
inputs for video and four RCA stereo inputs for
audio to one Y/C output and one RCA audio output.
Specifications: Band width, 20Hz~10MHz. Isolation:
30dB minimum.
Order #
33-4135
(ea.)
$19.95
Video Source
Selector
•Easily
connects
up to four home theater components to one output
•S-video or composite audio/video connections
•Includes remote control
Order #
VH915
Video Source Selector
•Provides up to six additional S-VHS or composite
stereo A/V inputs •Connects all your home theater
components into one central location •All the codes
from the various components connected to the video
source selector can be transferred to your remote
•Eliminates cable swapping, splitters and other
annoyances •Panel access for connecting to your
camcorders, digital cameras and video games for
easy playback on your TV •Back panel is labeled
with specific component access •One year warranty
•Dimensions: 12.7"(L) x 10.8"(W) x 4.1"(H)
Order #
VH920
(ea.)
$69.95
(ea.)
$39.95
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
301
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C51 pg 302
7/31/06
1:17 PM
Page 302
Remote Control
A/V Switch
SATV/CATV
Easily select from
as many as four
separate A/V
inputs by remote
control. Ideal for
home theater
systems where the base band A/V signal is the
desired source. Specifications: Band width:
20Hz~10MHz. Gain: 1dB. Isolation: 50dB minimum.
Inputs: Four sets via RCA type connectors. Outputs:
Two sets via RCA type connectors. Power source:
120VAC, 300mA.
Section 14
Audio/Video Matrix Switcher
Put an end to cable swapping and take control of
your audio/video system like never before. Video
matrixes allow you to send audio/video signals from
any of the eight inputs to any of the eight outputs
with the touch of a button. The audio/video from any
source connected to the matrix can easily be routed
to the input of any audio/video device connected to
the matrix. The matrix can split the audio and video
sources allowing you to add music to a video dub.
Control the operation from a PC via the RS-232C
port. Genlock inputs provide steady video signals
for optimum picture quality. This Matrix is a cost
effective solution for home audio video systems,
home theaters, video production facilities and
schools. Specifications: Video: Composite
input/output, 1V p-p, 75ohm. S/N ratio: -60dB.
Crosstalk: -60dB. Connectors: BNC (use #27-405
with RCA type video cables). Audio: Input/output:
High impedance, unbalanced. THD: <0.1%.
Frequency response: 20Hz~20KHz, +/- 3dB. S/N
ratio: >90dB. Crosstalk: -90dB. Power:
120VAC, 60Hz.
Order#
33-7760
(ea.)
$399.00
14
Electronic
Fiber Optic Switches
Order #
33-4140
(ea.)
$50.95
Audio/Video Selector
•Perfect for the
entertainment center
•Combines four
different video devices
(VCR, laser disc player,
etc.) into one output •Compatible with both mono
and stereo devices •Four audio/video inputs, one
audio/ video output •20Hz~10MHz frequency range
•Isolation 30dB minimum
Order #
32-4420
(ea.)
$14.95
Top
Order #
SB-V40S
Back
(1-3)
$49.95
(4-up)
$46.30
(ea.)
$81.08
Audio/Video Switcher
Add additional
components to your TV
and home theater system by providing additional
A/V inputs to your system. Four A/V inputs
including composite video and Y/C (S–video).
Mfr. #SVS-14.
Order #
80-3450
(ea.)
$29.95
Audio/Video
Selector
Connect four
audio/video components and a set
of powered speakers to your TV, all at one
time. This means no more hassels connecting and
reconnecting A/V components. Terk’s Video Selector
features multiple S–video jacks so you can optimize
the performance of all your components. Mfr. #VS-4.
Order #
80-4760
(ea.)
$41.20
NET 30
Terms
302
Order Online
www.mcminone.com
Order #
33-2895
(1-9)
$4.59
High Isolation Switches
•Three–way coaxial A/B/C
switch •Use for antenna,
CATV or VCR •Greater
than 65dB isolation
through 550MHz and
50dB through 900MHz
Description
A/B/C
A/B
(1-9)
$12.95
4.95
(10-up)
$10.25
4.19
•Two input, 75ohm, high
isolation •A/B switch for
CATV, MATV, MDS, SATV
and VCR applications
•Features zinc die–cast
housing •Molded PVC outer
case with mounting flanges •5~900MHz bandwidth
•90dB isolation “off” •Patented design
Order #
33-390
Remote Control
A/B Switch
•You’ll never have to leave the comfort of your chair
with this infrared remote control video switch
•Allows you to switch between two 75ohm inputs
(cable, antenna, satellite or dual cable systems)
•75ohm output (TV) •AC adaptor: 120VAC/12VDC,
100mA included •5MHz~900MHz bandwidth •89dB
isolation •UL listed •Remote requires two “AA”
batteries not included (#290-070)
Description
Switch
Replacement remote
(ea)
$27.95
7.95
(2-up)
$23.64
-
(1-9)
$4.99
(10-up)
$4.73
Coaxial Cable Switch
•Two input, slide type A/B
switch for CATV, MATV,
MDS, SATV, and VCR
applications •Offers a
quick selection from
regular TV antenna and
cable VCR or other input
sources •60dB isolation
typical •5~900MHz bandwidth •Output 75ohm
Order #
33-380
Order #
32-4425
32-4426
(10-up)
$4.21
Deluxe A/B Switch
•SB–V40S accommodates four audio/video sources
with a choice of S–video or composite video
connections •Adds flexibility to existing systems
Specifications: •Inputs: Four A/V inputs with
S–video (Y/C) jacks and composite video phono jacks,
L/R audio phono jacks •Output 1: A/V output with
S–video (Y/C) jack and composite video phono jack,
L/R audio phono jacks •Output 2: Audio output with
stereo mini jack •Weight: 6.5 oz. (185g)
•Dimensions: 71⁄8" x 13⁄4" x 23⁄8" (179 x 43.9 x 60mm)
Order #
24-6590
The AB–4 is a
push-button type coaxial
selector switch, suitable
for back–of–set or
similar flat surface
mounting. This unit
offers high isolation,
great return loss
characteristics, and
minimum loss over the
entire CATV spectrum, including both the VHF
and UHF bands. The AB–4 features an internal
secondary shield and a molded plastic outer cover,
providing excellent RF shielding. This durable
push–button type switch ensures reliable and
contact closure. The AB–4 is supplied with male
“F” connectors and necessary mounting hardware.
Electrical specifications: •Frequency range:
5~900MHz •Insertion loss: 0.2dB (5~250MHz),
0.5dB (250~900MHz) •Isolation: 85dB (5~250MHz),
65dB (250~900MHz) •Connectors: “F” type, female
Order #
33-1490
33-1485
Audio/Video Selector
These optical selector
switches allow you to
expand the inputs of your
optical devices. No need
to swap your expensive
optical cables between
multiple recorders and
players. This switch
features four Toslink
inputs and two Toslink
outputs for maximum
flexibility. The construction of these
units provides optimum light signal
transfer for high quality recording
and playback.
RF Switch
(1-9)
$3.99
(10-up)
$3.58
Nintendo Type
Automatic
TV–Game Switch
•Replaces antenna
game switch supplied
with Nintendo
and other video
game systems
•Automatically
switches from antenna
to game whenever
game is turned on
•Eliminates constant unhooking of antenna system
•8' cable cord included
Order #
33-1310
(1-9)
$5.95
(10-up)
$5.16
Game and Video Selector
•Audio/video selector with connection capabilities for 3 audio/game inputs
•Sleek compact design •Passive design requires no power supply
Order #
SB-V31G
(ea.)
$17.99
C51 pg 303
7/31/06
1:18 PM
Page 303
SATV/CATV
#80-1020
Locking Single
Stud Wall Mount
with 12° Tilt
This mount features
a strong barrel lock,
swivels 360° and has
a 12° tilt to reduce
reflections and glare.
Wood stud hardware
is included. Made of heavy gauge steel with a
baked–on black wrinkle finish. Platform width 19",
depth 12". Load limit 75 lbs.
Order #
80-2255
Heavy Duty
Adjustable Wall Mount
#80-1025
(ea.)
$99.99
•These wall
mounts are ideal
for maximum TV
viewing •Swivels 180° at wall and platform •Tilts
- 5° to +15° •Accommodates TVs from 12" to 17" and
to 24" wide •Adjustable padded side plates secure
TV without drilling holes •Must be stud mounted
•#80-820 and #80-825 supports up to 50 lbs.,
#80-830 and #80-835 supports up to 65 lbs.
Mfr. #
HMS1217B
HMS1217W
HMS1724B
HMS1724W
Mobile Equipment Carts
Two 24" wide x 18" deep platforms (81⁄2" clearance
beween platforms). 4" heavy–duty casters with
locking brakes. 120 lb. load limit. Black finish. Welded
steel construction. 24" high. 120 lb. Load limit. Black
finish. Welded steel construction.
“Sightline”
Television
Wall Mounts
Order #
80-820
80-825
80-830
80-835
Section 14
Size
12"~17"
12"~17"
17"~24"
17"~24"
Color
Black
White
Black
White
(ea.)
$99.95
99.95
110.00
110.00
Locking Door
VCR Enclosure
Order #
80-2180
(ea.)
$139.00
(ea.)
$124.95
Three 24" wide x 18" deep platforms (81⁄2" between top
and middle, 131⁄2" between middle and bottom
platforms). 4" heavy-duty locking casters. 34"
high. 120 lb. load limit. Black finish. Welded
steel construction.
Order #
(ea.)
80-1025
$208.99
“Easyview” TV and VCR
Wall Mounts
Order #
80-840
80-850
80-855
80-860
80-870
Mfr. #
HM1217B
HM1724B
HM1724W
AVCR914B
AVCR1420B
Mount
TV
TV
TV
VCR
VCR
(ea.)
$219.00
Double Stud
Locking HeavyDuty Wall
Mount
with 7° Tilt
A sturdy, stable,
reinforced mount, ideal for heavier televisions. With a
steel arm, a two–stud wall plate and a strong barrel
lock, this mount provides strength and security. It has
a 360° swivel and a fixed 7° tilt. Wood stud hardware
is included. Heavy gauge steel construction with an
oven baked black wrinkle finish. Platform width 19",
depth 12". Load limit 175 lbs.
#80-850
•Adds versatility to your
TV viewing •Swivels 180°
only at platform •Tilts -5°
to +15° •Adjustable
clamps hold securely with
no need for drilling holes
in TV •Accommodates TVs
from 12" to 17" and to 24"
wide •Supports up
to 75 lbs.
Order #
80-1550
Order #
80-2245
(ea.)
$177.99
#80-860
Size
12"~17"
17"~24"
17"~24"
9"~14"
14"~20"
Color
Black
Black
White
Black
Black
(ea.)
$79.95
79.95
79.95
44.95
47.99
14
This locking VCR
enclosure allows
you to conveniently
and easily secure
your VCR underneath your mounted television. The
wall prevents VCR removal from the open back while
a cam style lock secures the front door. Cords feed
into the VCR through the rear. Made of heavy gauge
steel with baked black wrinkle finish. Cavity width
17", depth 141⁄2", height 43⁄4".
Order #
80-1020
Heavy duty TV wall mount
for maximum flexibility of TV
viewing. Double stud mount for
heavy loads up to 175 pounds. Mount holds televisions
from 20"~30" wide. Black wrinkle finish. 360° swivel,
0°~-20° tilt. Comes complete with hardware and
safety strap. Must be stud mounted.
#80-880
#80-885
Adjustable
Ceiling Mount
Locking Ceiling Mount
with Tilt
Wall Mount for Mid–Sized TVs
Features include a 360°
swivel, a fixed 12° tilt
and an “L” style arm
that allows TV to
swivel left and right
for versatile viewing.
Barrel lock and solid
steel construction secure
your television from risk
of theft. Standard pipe
length is 30" and custom
lengths are available. Black wrinkle finish.
Platform width 19", depth 12". Load limit 75 lbs.
Order #
80-2250
(ea.)
$104.95
Locking Furniture
Swivel Mount
Secures TV sets to furniture or
countertop with bolts or adhesive. Made of heavy
gauge steel with a baked black wrinkle finish. For
use in armoires, cabinets and other recessed areas.
Platform width 19", depth 12". Load limit 100 lbs.
Swivels 360°.
Order #
80-2265
(ea.)
$52.99
•Heavy–duty TV ceiling
mount for full viewing
capacity •Handles TVs up
to 120 lbs. •Adjustable tilt from 0° to 20° •Rotates
360° •Optional VCR/laser disc mounts available
•Mounting adaptor kit must be used to attach a VCR
mount to ceiling mount (#80-895)
This practical and economical
mount swivels 360° and
has a 12° tilt. Wood
stud hardware is
included. Made of
heavy gauge steel
with a baked black
wrinkle. Platform width 211⁄2",
depth 123⁄4". Load limit 75 lbs.
Order #
80-2260
(ea.)
$49.95
Order #
80-880
80-885
80-890
80-895
Atlas Ceiling Mount
Description
Mount
Flange
Mount Size
TV
20"~30"
VCR
9"~14"
VCR
14"~20"
Adaptor
-
Color
(ea.)
Black $177.99
Black
44.95
Black
44.95
10.99
Heavy-Duty
Safety Strap
Designed to hold the
big televisions, the
Atlas has a 500 pound
capacity. Adjustable to
accommodate televisions
from 30"~45" wide. Black
wrinkle finish. Unique side
arm clamps adjust to secure
the TV and adhesive grips add
stability. Includes 18" pipe. Use
#80-1560 mounting flange (sold
separately) for installation.
Order #
80-1555
80-1560
Mfr. #
ACM2030
AVDS914
AVDS1420
ATAVDS
Strongly recommended
upgrade to secure
difficult-to-attach
monitors and
TV/VCR combinations.
Order #
80-2225
(ea.)
$209.00
39.99
Size
20"
(1-3)
$14.95
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
303
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C51 pg 304
7/31/06
1:19 PM
Page 304
SATV/CATV
Cantilever
LCD Mount
Offering the most
flexibility of all
OmniMount LCD
mounts, the cantilever
design provides the widest
range of movement.
The swing arm provides
extension capability, as
well as 180° rotation, and the mounting plate
provides swivel and ±30° tilt functions. Variable
tension on all adjustments allows for ease of use with
all monitor sizes. Intended for monitors from 10"~30"
diagonal measure, the all aluminum construction
supports up to 30 lbs. Compatible with standard
VESA 75 and 100 mounting patterns, specific adaptor
plates are available by special order. Includes all
mounting hardware
Section 14
17FM–F Fixed
LCD Mount
Simple fixed, “hot
swap” mount allows
for flush mounting on any
wall, offering the lowest profile
mounting solution. Two piece
design includes plate to attach to
the wall, and a plate for the rear
of the monitor, for easy slide down
attachment. Intended for monitors
from 10"~30" diagonal measure,
the all steel construction supports
up to 40 lbs. Compatible with
standard VESA 75 and 100
mounting patterns, specific adaptor plates
are available by special order. Includes all
mounting hardware.
Order #
50-7950
Order #
50-7965
Large LCD Monitor
Cantilever Mount
(ea.)
$34.95
14
17FM-T Tilt
LCD Mount
Allows near flush
mounting on any
wall, and provides tilt range of
-5° ~ +15° for optimum viewing.
Intended for monitors from
10"~30" diagonal measure, the all
aluminum construction supports up
to 40 lbs. Compatible with standard
VESA 75 and 100 mounting
patterns, specific adaptor plates are available by
special order. Includes all mounting hardware.
Order #
50-7955
(ea.)
$50.95
Flip–Down LCD Mount
Perfect for under cabinets,
shelves or anyplace where
the monitor needs to be
moved out of the way. The
mounting bracket allows
180° range of movement,
and the swivel assembly
allows full 360° (limited
by space and wiring)
movement. Variable tension on all
adjustments allows for ease of use with
all monitor sizes. Intended for monitors
from 10"~30" diagonal measure, the all
aluminum construction supports up to
40 lbs. Compatible with standard VESA
75 and 100 mounting patterns, specific
adaptor plates are available by special order.
Includes all mounting hardware.
Order #
50-7960
Offering the most
flexibility of all
OmniMount LCD mounts, the cantilever design
provides the widest range of movement. The swing
arm provides extension capability, as well as 180°
rotation, and the mounting plate provides swivel
and ±30° tilt functions. Variable tension on all
adjustments allows for ease of use with all monitor
sizes. Intended for monitors from 30"~40" diagonal
measure, the all aluminum construction features
a platinum powder coat finish and supports up to
80 lbs. Compatible with standard VESA 75 and 100
mounting patterns.
Order #
50-7970
Order Online
www.mcminone.com
Order #
50-7980
(ea.)
$379.00
Double Stud
Mount Plate
Ideal for all plasma
mounts, as well as
other TV mounts, when double stud mounting is
required by local code. Available for use with 16" or
24" studded walls, each model features flexible 11⁄2"
mounting locations across the plate. Durable black
powder coat finish is easily hidden behind monitor.
Includes complete hardware kit.
Order #
50-7990
50-7991
Model #
PLAD-DS16
PLAD-DS24
Stud Center
16"
24"
(ea.)
$75.95
84.95
(ea.)
$169.00
Plasma Television
Mounting System
OmniMount plasma
mounts are designed
with safety and
reliability in mind.
The added weight of
plasma displays requires serious attention when
mounting in a given situation. The 54FB-F mount
features two fully adjustable supports with slotted
openings, which allows compatibility with virtually
all plasma monitors up to 63". Set for fixed flush
mounting, flat against the wall, this mount may
be used on 16" or 24" studded walls and will
support up to 175 lbs.
(ea.)
$64.95
Plasma Television
Mounting System
(ea.)
$84.95
This cantilever
mount provides
the benefits of an
extension arm,
plus 180° rotation.
Additionally, the
mounting plate provides
swivel and ±25° tilt
functions. Variable
tension on all
adjustments allows
for ease of use with all
monitor sizes. This mount supports up to 150 lbs.
and will accept monitors up to 50". Double arm
design folds flat against the wall. Designed
for double stud mounting.
Pipe Adaptor Mount
Order #
50-7975
NET 30
Terms
304
(ea.)
$84.95
Universal
Cantilever Plasma
Television Mount
OmniMount plasma
mounts are designed
with safety and
reliability in mind.
The added weight
of plasma displays
requires serious attention when mounting in a given
situation. The 54FB-T mount features two fully
adjustable supports with slotted openings, which
allows compatibility with virtually all plasma
monitors. Additionally, this unit has an adjustable
tilt range of +15° ~ -5°. May be used on 16" or 24"
studded walls and will support up to 175 lbs.
Order #
50-7985
(ea.)
$84.95
Compatible with all
OmniMount plasma
mounts, this pipe
adaptor allows monitor
to be attached directly to standard 11⁄2" NPT thread
pipe. Ideal for boardroom and public display monitors
that are attached to roof supports above ceiling.
Durable black powder coat finish is easily hidden
behind monitor. Includes complete hardware kit.
Order #
50-8000
(ea.)
$67.95
Universal Projector
Mounts
•Universal grid mounting
system fits virtually all
projector types •Mount
can be rotated for use with
wide or narrow projector
styles •Slide together
mounting plates allow
quick installation/removal •Provides integral cable
management •Leveling plate adjusts image tilt and
pitch •Includes mounting plate for close–to–ceiling
mount •Adjustable 12"~19" extension pipe sold
separately •Accepts security hardware to prevent
theft PMD-1: •30 lb. maximum weight capacity
•Designed for small projectors •Maximum mounting
footprint 9" x 11" PMD-2: •40 lb. maximum weight
capacity •Designed for medium projectors
•Maximum mounting footprint 111⁄2" x 131⁄2"
Order #
50-8005
50-8010
50-8011
Model #
PMD-0.5
PMD-1
PMD-2
Stud Center
Pipe extension
Small mount
Medium mount
(ea.)
$64.95
96.95
129.00
C51 pg 305
7/31/06
1:24 PM
Page 305
Desktop
LCD Panel
Mount
SATV/CATV
Allows LCD computer
and video monitors of up
to 33 lbs. to be clamped to
the side of the desk. •VESA
75/100 compatible •Lift
and drop screen placement
•Cable management
•360° rotation at the base
•210° horizontal swivel
•90° vertical tilt •Allows
portrait or landscape view
Order #
50-8030
Plasma Television
Mounting System
OmniMount plasma
mounts are designed
with safety and
reliability in mind.
The added weight of plasma displays requires serious
attention when mounting in a given situation. The
37FBHD-F mount features two fully adjustable
supports with slotted openings, which allows
compatibility with virtually all plasma monitors.
Set for fixed flush mounting, flat against the wall,
this mount may be used on 16" or 24" studded walls,
and will support up to 80 lbs.
(ea.)
$97.50
Order #
50-8015
(ea.)
$51.95
Plasma Television
Mounting System
OmniMount plasma
mounts are designed
with safety and
reliability in mind.
The added weight of plasma displays requires serious
attention when mounting in a given situation. The
37FBHD-F mount features two fully adjustable
supports with slotted openings, which allows
compatibility with virtually all plasma monitors.
Set for fixed flush mounting, flat against the wall,
this mount may be used on 16" or 24" studded walls,
and will support up to 80 lbs.
Order #
50-8020
Order #
80-5140
(1-3)
$40.75
(4-up)
$37.77
•Three direction
LCD monitor
bracket; side-to-side
up-down tilt, and
portrait-landscape spin
•Includes screws for
concrete and wood •Meets VESA
75 and 100 mounting patterns
•Ideal for LCD monitors up to 19" Note: Do not
exceed 30 lb. maximum load limit.
(ea.)
$19.95
B
A
LCD Swing-Arm
Wall Mount
Unique dual joint design facilitates
tilting, rotating and swiveling to view your flat
panel display from any angle. Features: •Low
profile design with silver finish •Fast and easy wall
mounting •30° tilt and a 180° swivel •Includes stud
mount wall plate, monitor plate and hardware kit
•Meets VESA 75 and 100 mounting patterns. •Ideal
for LCD monitors up to 19" Note: Do not exceed 30 lb.
maximum load limit.
TV Mounts
•Suspends 14"~29" diagonal screen monitors for
convenient audience viewing •360° swivel point and
tilt adjustments allow screen to be aimed directly
at the viewer •Platform base for added stability
•Black enamel finish •Supports 110 lbs.
•Limited quantities
Fig.
A
B
-
Order #
80-4790
80-4795
80-2225
#80-5100
Description
Ceiling mount
Wall mount
Safety strap
(1-3)
$59.95
59.95
14.95
(4-up)
$57.50
57.50
-
TV Mounting Brackets
The space saving design
and sleek, contemporary
styling of these mounts
complement any décor.
Manufactured from
tempered high grade steel with
#80-5105
a scratch resistant finish. Tilt and swivel adjustment
allows easy viewing from any angle. Vigorously tested for
#80-5070
safety and durability. Comes with easy to read instructions. The perfect alternative
to bulky TV stands, shelving and consoles. Available in ceiling or wall mount styles.
Includes security strap. Tilt angle 0~10°. Optional accessories include: •VCR
Holder: Holds front load VCRs and most DVD players and satellite receivers, opens
from 13"~21", top clamp adjusts from 3"~5.875", for use with all VMP mounts •Add–on holder: Allows a
second device (VCR/DVD player/satellite receiver) to be attached to the VCR Holder. Black.
Order #
82-11341
(ea.)
$29.95
LCD Ceiling
Mount Support Arm
14
•Mount TV, VCR or
monitor onto wall for
optimum viewing
•Swivels 360°
•Heavy–duty steel
construction •Supports
up to 66 lbs. •Must be
stud mounted •White enamel finish •Can be painted
to match any decor •Adjustable width platform
LCD Wall
Mount Kit
Order #
82-11340
(ea.)
$64.95
Economical TV
Wall Bracket
Section 14
Solid, welded design supports up to
40 lbs. and extends up to 3' from ceiling
to support most flat panel displays
between 10" and 30". Features:
•Fast and easy ceiling mounting •±20°
up-down tilt and a 180° side-to-side
swivel •Meets VESA 50, 75 and 100
mounting patterns. •Black finish
•Hardware kit included Note: Do not
exceed 40 lb. maximum load limit.
Order #
82-11342
(ea.)
$29.95
#80-5085
Tray
Dimensions
Width x Depth
Order #
Description
Ceiling Mounts
80-5070
Small
15" x 11"
80-5075
Medium
19.75" x 12.75"
80-5080
Large
24" x 13.75"
Wall Mounts
80-5085
Small
15" x 11"
80-5090
Medium
19.75" x 12.75"
80-5095
Large
24" x 13.75"
Optional Accessories
80-5100
VCR holder
80-5105
Add-on holder
*Also swivels 260° at platform base
Overall
Depth
Load
Fits TVs
Swivel
Rating
Angle
(1-3)
(4-up)
22.50"
22.75"
22.75"
9"~13"
19”~21"
25"~27"
60 lbs.
75 lbs.
125 lbs.
360°*
360°
360°
$39.95
49.95
59.95
$38.23
47.79
57.25
20.125"
23.50"
25.75"
9"~13"
19"~21"
25"~27"
60 lbs.
75 lbs.
125 lbs.
140°*
140°
140°
29.95
39.95
49.95
28.68
38.23
47.79
14.95
11.95
13.75
10.60
Rear
Panel A/V
Extenders
#24-6595
Easily
connect and re-connect video games, camcorders
and portable audio/video devices to your television’s
audio/video inputs without having to turn the
television around each time. These extenders will
save your back from strains and virtually eliminate
the danger of dropping your television every time
you plug into the A/V inputs. Standard A/V inputs
via “RCA” type jacks on the front or side of your
television and “RCA” type plugs for the rear.
Available with S-video capability for such
equipped devices.
Order # Description
(ea.) (2-4) (5-up)
24-6595 A/V and S-video (shown) $20.95 $18.00 $16.29
24-6600 A/V only
16.95 12.63 11.18
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
305
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising