HD Distribution and Control HD distribution solutions for Residential / Commercial Hospitality / Retail and Educational Sectors Product Guide 2011 WyreStorm is a company focused on the development and manufacture of HD distribution products at the forefront of digital technology. Our research and development team are leading specialists in the HD distribution industry, designing and developing innovative solutions to suit the ever growing number of residential and commercial applications. WyreStorm’s development laboratories are based in China and Europe, with our production facilities in Shenzhen China, a key location in cutting edge technologies and the cradle of new trends in the electronics industry. Our products are manufactured to ISO9001 standards by an HDMI adopter organisation and HDBaseT Alliance member. We provide high quality and reliable solutions for both the residential and commercial markets, with broad applications such as digital signage, custom install, conference and board rooms, retail store fit-outs, as well as super yachts and sports bars. Furthermore, all our Matrix products have full integration with market leading control systems. What Do We Deliver? Our product range is wide and encompasses HD splitters, extenders, upscalers and matrices, working on HD distribution over HDMI, coax, Cat5e/6/7 and fibre optic. All our products are supplied with a comprehensive two year warranty, backed up by dedicated in-house technical support throughout key markets in the world, supporting our network of distribution partners. US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 www.wyrestorm.com E Index WyreStorm HDBaseT Matrix Solutions 2-3 WyreStorm Pro Matrix Switchers 4-5 FAQs 6 WyreStorm 4 and 8 Way Cat5e/6/7 Splitters 7 WyreStorm Transmitters 8 WyreStorm Point to Point Extender Sets 8-9 WyreStorm HD Switchers and Scalers 10 WyreStorm HD Format Converters 10 WyreStorm Standard HD to HD Matrix 11 WyreStorm Extenders supporting HDMI 11 WyreStorm Standard HD Splitter Range 12 WyreStorm HD Test Equipment 13 WyreStorm Hints and Tips 13 ScreenTech Waterproof Televisions 14-15 WyreStorm Serial Digital Interface Solutions 16 WyreStorm Extender Guide European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 17 1 WyreStorm HDBaseT Matrix Solutions Our ‘flagship’ range of Matrix switchers utilise the latest in HDBaseT ‘One-Cable’ technology and enables unprecedented flexibility for both residential and commercial applications. Technology that delivers HD audio and video, IR and RS232 control, plus high speed internet access all on a single Cat5e/6/7 cable, eliminating the need for additional control and video cables on installations. All three models feature: • EachoutputfeaturesintegratedsingleRJ45outputs • EachoutputcardoffersRS232 • RefinedforCustomInstallandHomeTheatreinstallations • ConstantHDCPpreventingscreendrop-outs • TotallydiscreteIRsourcecontrolallowingeasyinstallof duplicate HD sources • Singlecablesolutionincludingtransmissionoffull HDaudio/video,RS232,2-WayIRandEthernet • 1080pupto100mrangeusingCat5e/6/7UTP (including 3D applications) • Fullysupports48bitDeepColour • HDCPcompliant,EDIDManagement • ControlviafrontpanelIR,remoteIR,RS232, RS485 and LAN • Accessoriesinclude:19”rackears,IRreceiver, IRemittersandmatrixremotecontrol • OpensourceRS232driversavailableforthird party products • 10.2Gbpsbandwidthoutputcapacity • Controlsignalscanbesentfrommatrixtoscreenvia2-wayIR Full range of analogue Input converters available (see page 10) RS232 AND IP integration protocols are available with the market leading control systems such as: Rear view 16/16 Output Full HD Matrix Switch 100m Single Cat5e Carrying Full HD, Audio, Ethernet, IR and RS232 ™ Media Server 100m Single Cat5e Cable TV Satellite TV 3D Blu-ray Games Console 8 or 16 HD Inputs Media Player Internet Router 100m Single Cat5e RS232 LAN Control System Please note: Some supplied drivers use open source RS232/LAN coding and are not always a part of an official integration programme. 2 Ideal for Residential and Commercial applications US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 www.wyrestorm.com E WyreStorm HDBaseT Matrix Products 8 / 8 Output Full HD Matrix Switch Dimensions (WxHxD): 440mmx140mmx280mm/17.3”x5.5x11.02” Weight: 3.4kgs / 7.5lbs Power Consumption: 35 Watts max Pack space Required: 4U Part Number MX0808-HDBT 8 / 16 Output Full HD Matrix Switch 16 / 16 Output Full HD Matrix Switch Dimensions: (WxHxD): 440mmx350mmx390mm/17.3”x13.8x15.35” Weight: 18kgs / 39.7lbs Power Consumption: 60 Watts max Pack space Required: 9U Part Number MX0816-HDBT Dimensions (WxHxD): 440mmx350mmx390mm/17.3”x13.8x15.35” Weight: 20kgs / 44lbs Power Consumption: 60 Watts max Pack space Required: 9U Part Number MX-1616-HDBT WyreStorm HDBaseT Receivers HDBaseT – Supported by the HDBaseT Alliance, is a consumer electronic connectivity technology for long distance transmission of uncompressed high definition video, audio, 100BaseT Ethernet, control via IR and RS232 and eventually power, all via 100m Cat5e/6/7 cable and RJ45 connectors. The HDBaseT Alliance was Incorporated June 14th 2010 by founder members Samsung Electronics, LG Electronics, Sony Pictures and development company Valens. WyreStorm Technology were one of the first Alliance Members to sign up and develop product. Full HD Uncompressed Video: CE devices must be able to send uncompressed 1080P, 60Hz, 48bits/pixel digital video that is characterized with high throughput over long distance using a single cable that is cheap, easy to install, reliable and standardized. Uncompressed content is important because it supports all video sources, including legacy products, accurately renders gaming graphics and features such as Electronic Program Guides, and does not degrade video quality or add latency. Audio: Audio is an essential part of every CE device. 100BaseT Ethernet: Across the CE industry, leading players are revamping audio and video equipment for a future centred around the Internet.Thisiscriticalforenablingaworldinwhichtelevisions,stereos, computers and other CE devices can communicate with each other and access all sorts of multimedia content, such as video, pictures and music stored around the house. Various Control Signals: At the centre of every multimedia distributionsystem,frombasicpoint-to-pointconnectivitytoamultisource/display system, is the ability to send control signals. Different types of control signals have different purposes, starting from CEC that operatesbasicfunctionalitysuchaspower-on,power-offandplay/stop withapressofabutton,toRS232/USBandIRthatoperateremote equipmentevenwhenitislocatedinadifferentroom.TwowayIR supportedfordistancecontrolofin-roomdevices. HDBaseT Single Cat5e/6/7 Display Receiver Features: • Cat5e/6/7toHD,RS232,IRandEthernetout • WidebandIRreceiversandpowersupplyincluded • ForusewithanyoftheHDBaseTMatrixswitchers • Typicalcablerunsupto100m Dimensions (WxHxD): 152mm x 31mm x 105mm / 5.98”x1.22x4.13” Weight: 0.88kgs / 1.94lbs Part Number RX-100IR-HDBT NEW In-wall HDBaseT Single Cat5e/6/7 Display Receiver Features: • Cat5e/6/7toHD,RS232,IR and Ethernet out • DualAmericanelectricalboxstandard • Bothinnerandouterpowerconnectorsprovided • ForusewithanyoftheHDBaseTMatrixswitchers • Typicalcablerunsupto100m Part Number RX-100IR-HDBT-IW WyreStorm Short HDMI Leads Perfect for connection between HD display and RX receivers includes free right angled adaptor Part Number RX-CBL-HDMI European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 3 WyreStorm Pro Matrix Switchers The Pro Matrix range provide distribution of uncompressed Full HD video and non-HD AV source equipment over long distances using Cat5e/6/7 cabling. With refined switching and handling of HDCP and EDID, multiple devices can be independently switched and controlled in multiple locations. Discreet infrared control, RS232 and LAN connections can be made for third party control from the market leading control systems. Ideal for both residential and commercial projects alike, each Pro Matrix also features simultaneous HDMI outputs for potential system expansion, or integration into alternative extender sets such as the coax and fibre options. Dual Cat5e Carrying Full HD, Audio and IR 50m Twin Cat5e Media Server Cable TV Games Console 4 or 8 HD Inputs Apple TV Dual Cat5e Display Receiver 4 Input / 8 Output Full HD Matrix Switch RS232 50m Single Cat5e (No IR) Features • EachoutputfeaturesintegratedRJ45sforboth single or dual cable modes with additional fully functioningduplicatestandard19pinHDMI outputs • RefinedforCustomInstallandHomeTheatre Installations • ConstantHDCPpreventsscreendrop-outs • TotallydiscreteIRsourcecontrolallowingeasy install of duplicate HD sources • SingleordualCat5e/6/7support(singlecable withoutIRcontrol) • Fullrangeofanalogueinputconvertersavailable • 1080pupto50mrangeusingCat5e/6/7 (including 3D applications) • Longerrangesavailablewithin-line repeater device • Supports24bitcolourdepth (36bit with HDBaseT Extenders) • HDCPCompliant,EDIDmanagement • ControlviafrontpanelIR,remoteIR,RS232, RS485 and LAN • Accessoriesinclude:19”rackears,IRreceiver, IRemittersandmatrixremotecontrol • 6.75Gbpsbandwidthoutputcapacity • Eachoutputcanbesplit LAN Control System Ideal for Residential and Commercial applications RS232 AND IP integration protocols are available with the market leading control systems such as: ™ Please note: Some supplied drivers use open source RS232/LAN coding and are not always a part of an official integration programme. 4 Input / 2 Output Full HD Matrix Switch Dimensions (WxHxD): 440mmx42mmx202mm/17.3”x1.7”x7.9” Weight: 2kgs 4.4lbs Power Consumption: 10 Watts max Pack space Required: 1U Part Number 4 MX0402-PRO 4 Input / 4 Output Full HD Matrix Switch Dimensions (WxHxD): 440mmx42mmx202mm/17.3”x1.7”x7.9” Weight: 2kgs 4.4lbs Power Consumption: 12 Watts max Pack space Required: 1U Part Number MX0404-PRO US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 www.wyrestorm.com E 4 Input / 8 Output Full HD Matrix Switch Dimensions (WxHxD): 440mmx42mmx202mm/17.3”x1.7”x7.9” Weight: 2kgs 4.4lbs Power Consumption: 30 Watts Max Pack space Required: 1U Part Number MX-0408-PRO 8 Input / 8 Output Full HD Matrix Switch Additional Remote Controls Available 4 x 2 Remote Control Part Number RM-0402 4 x 4 Remote Control Part Number Additional Features • OpensourceRS232driversavailableforthirdpartyproducts Dimensions (WxHxD): 440mmx140mmx280mm/17.3”x5.5x11.02” Weight: 3.4kgs Power Consumption: 35 Watts Max Pack space Required: 4U Part Number RM-0404 MX-0808-PRO 4 x 8 Remote Control Part Number RM-0408 WyreStorm Receivers Complimentary to the Pro Matrix products, the display receivers are typically mounted behind the screen. Single Cat5e/6/7 Display Receiver Features: • SingleCat5e/6/7displayreceiver • Cat5e/6/7toHD(noIRsupport) • Powersupplyincluded • ForusewithallProMatrix • Typicalcablerunsupto50m Dimensions (WxHxD): 60mmx23mmx115mm/2.3”x0.9”x4.5” Part Number RX-50-PRO Dual Cat5e/6/7 Display Receiver Features: • Cat5e/6/7toHD,WideBandIRreceiver • PowersupplyandIRreceiversupplied • ForusewithallProMatrixandCat5e/6/7 splitters • Typicalcablerunsupto50m Dimensions (WxHxD): 60mmx23mmx115mm/2.3”x0.9”x4.5” Part Number RX-50IR-PRO USB to 5V Cable Available DevelopedtoenablepoweringofreceiversviaTVUSBoutput.Idealforﬂat panel TV installations where space is at a premium. Part Number CAB-USB-5V NEW In-wall Dual Cat5e/6/7 Display Receiver Features: • Cat5e/6/7toHD,IRreceiver • Single(USstyle)electricalboxstandard • Modulardesign • UsingdualCat5ecabletotransmit HDMIsignal • Bothinnerandouterpowerconnectors provided • Typicalcablerunsupto50m Part Number RX-50IR-PRO-IW Cannot be used with HDBaseT models European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 5 Cat5e/6 HD Distribution Solutions FAQs Cat 5e or 6? While our equipment is tested and graded to Cat 5e cable standard; tests have shown that better results are achieved when using Cat6 cable. The lower gauge, thicker copper cores ensure better signal transfer. Newly installed cabling should always conform to Part P Regulation and BS 7671 (17th Edition), and should be terminated to 568B standard. Can I use a single Cat 5e cable? Although conventional transmission is considered to be two Cat 5e cables, it is possible to send the signal down a single cable if necessary. All of our pro-matrix switches and UTP splitters support single UTP mode, however in this mode IR control of sources and matrix switching is not possible. However using HDBaseT transmission; all of the twin cable features are supported with the added benefit of Ethernet and RS232 control. How far can the signal travel? Under perfect transmission conditions our HD receivers will operate at 30, 50 or 100m (@1080p) depending on the model used. Perfect conditions mean no electrical interference, straight cable runs with no bends or kinks and no patch panels or wall outlets. If some of the above are factors in your installation then signal strength and bandwidth can be compromised. If a cable run is reaching the upper limit of the receivers’ capabilities, then the signal can be boosted by way of an extender set (Rx-TX) or by simply using an in-line repeater. Our transmission signals can be repeated up to 5 times (250m) using a conventional TMDS signal or 7 times (700m) using HDBaseT technology. What about 3D? All of our matrix switches and most of our extender products will pass-through a 3D Blu-ray signal. The 30m and Coax extender sets do not support frame sequential 3D (Blu-ray), but will still pass-through interlaced stereo-scopic 3D (Satellite etc.) How do I control the sources? Most of our HDMI distribution products support some kind of IR pass-through from point-to-point extender sets to pro and HDBaseT matrices. Most of the range now supports wideband IR meaning it is compatible with any IR device available on the market. Our Pro and HDBaseT matrix range (Cat 5e) has IR pass-through from each of the outputs and has discrete IR outputs at the switch end, meaning you can have multiple identical sources yet the IR would be routed only to the applicable source. Do I need power at the TV end? Why do I need to use 2 cables? Using our conventional pro (TMDS) transmission method the Video & Audio is sent along cable #2, IR and HDCP data is sent along cable #1. Using our HDBaseT technology it’s possible to send Audio (up to DTS Master), Video (up to 4k), Ethernet (10/100), and control (RS232 & 2-way IR) down a single Cat 5e cable. Is your equipment compatible with HDMI 1.4? HDMI 1.4 refers to a list of “features” that a device is capable of supporting. These features include Ethernet channel, return audio channel, 3D etc. HDMI distribution equipment has no need to be fully 1.4 compliant but instead supports all of the relevant features such as 3D etc. What happens about screens with different resolution capabilities? When sending a signal point to point a TV will communicate it’s capabilities to the source, then the source will output a suitable signal that compatible (i.e. 1080p Stereo audio). If you were to use a matrix switch with three 1080p screens and one 1080i screen, the resultant image would be 1080i across all screens. The matrix switches do not scale per output but instead negotiate with the source a signal that all screens are capable of supporting. How does the Matrix cope with HDCP? HDCP (High Definition Copyright Protection) is a feature built in to HDMI devices to prevent theft of or illegal distribution of HD content. Unlike competing products, WyreStorm matrix switches are legal and comply with HDCP regulations. They do this by assigning a “key” to every display connected to the switch. HDCP “keys” are assigned to a display when connected to a HDMI device normally. This doesn’t change when connected to a switch; it just assigns more of them. EDID Extended Display Identification Data HDMI High Definition Multimedia Interface HDCP High Bandwidth Digital Content Protection TMDS Transition Minimized Differential Signaling Cat 5e Category 5 enhanced RS232 Recommended Standard 232 control protocol DTS Digital Theatre System THX Derived from Tomlinson Holman’s eXperiment and George Lucas’ first movie in 1971: THX-1138 1080i/p 1080 horizontal lines scanned in i (interlaced) or p (progressive) format DIP (DIP switch) Dual in-line package CEC Consumer electronics Control DVI Digital Video Interface I can get 1080i but not 1080p at a TV location Firstly ensure that both the source is outputting 1080p and that the TV is Full HD 1080p screen. If this is the case then the receiver Cat 5e or Coax may need setting up for long cable mode using the DIP switches. This useful feature uses an alternative Equalisation method to re-sync the signal over longer distances. I cannot get a signal out from my A/V receiver along a Cat 5e extender set SDI Serial Digital Interface DDC Display Data Channel (Referring to Pins 17 & 18 in a HDMI plug that handle EDID & CEC) UTP Unshielded Twisted Pair Check to ensure that the A/V Receiver isn’t adding CEC (HDMI Control Protocol) to the outgoing signal, this can sometimes have an effect on the HDMI signal. Yes. Our HD display adaptors require a 5v power supply at the TV end to operate. It’s important that these are powered locally and do not receive remote power from the rack as there can be issues resulting from voltage drop along the length of cable. Our new USB power cables overcome the problem of having a second mains outlet behind the TV. These useful leads draw the 5v from the USB socket on the TV to power the receiver, this also means that the receiver is only powered when the TV is on making the system more environmentally friendly. WyreStorm HDBaseT Extender Set 6 US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 E WyreStorm 4 and 8 Way Cat5e/6/7 Splitters These cost effective splitters are ideal for small commercial and multi-dwelling installations. The SP-UTP-0104 and SP-UTP-0108 offer single HD source distribution, providing uncompressed true HD distribution over long distances using Cat5e/6/7 cabling, with the ability to control the source from display locations. Single/Dual Cat5e Carrying Full HD, Audio and IR WyreStorm Receivers 50m Twin Cat5e Cable TV 50m Single Cat5e (No IR) Dual Cat5e Display Receiver 8 way splitter Dual Cat5e/6/7 Display Receiver Features: • Cat5e/6/7toHD,WideBandIRreceiver • PowersupplyandIRreceiversupplied • ForusewithallProMatrixandCat5e/6/7 splitters • Typicalcablerunsupto50m Dimensions (WxHxD): 60mmx23mmx115mm/2.3”x0.9”x4.5” Part Number RX-50IR-PRO Ideal for Residential and Commercial applications NEW 1 Input / 8 Outputs Features • SingleHDinput • SevenintegrateddualCat5e/6/7outputsfor connection to your specified display adaptor • OnestandardHDMIOutputforlocaldisplay • IRemitterinputforsourcecontrolfromdisplay location • EDIDmanagement • Transmission–typically50musingwell installed Cat5e/6/7cable Dimensions (WxHxD): 268mmx43mmx153mm/10.5”x1.7”x6” Weight: 1.0kgs Power Consumption: 15 Watts Part Number NEW 1 Input / 4 Outputs Features • SingleHDinput • FourintegrateddualCat5e/6/7outputsfor connection to your specified display adaptor • IRemitterinputforsourcecontrolfromdisplay location • EDIDmanagement • Transmission–typically50musingwell installed Cat5e/6/7 cable Dimensions (WxHxD): 175mmx40mmx115mm/6.9”x1.6”x4.5” Weight: 0.4kgs Power Consumption: 8 Watts Part Number SP-UTP0104 SP-UTP0108 NEW In-wall Dual Cat5e/6/7 Display Receiver Features: • Cat5e/6/7toHD,WideBandIRreceiver • NorthAmericanwallplatestandard • Modulardesign • UsingdualUTPnetcabletotransmitHDMI signal • Bothinnerandouterpowerconnectors provided • Typicalcablerunsupto50m Part Number RX-50IR-PRO-IW USB to 5V Cable Available DevelopedtoenablepoweringofreceiversviaTVUSBoutput.Idealforﬂat panel TV installations where space is at a premium. Part Number CAB-USB-5V Cannot be used with HDBaseT models European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 7 WyreStorm Transmitters The TX-50-PRO and TX-100-HDBT are ideal compliments to installations of in-wall dual Cat5e/6/7 and HDBaseT receivers where a Matrix may not be required. NEW TX-50-Pro Features: • Upto50mtransmissiontoin-wallreceiver • IRsourcecontrolpassthrough. • 1080psupport • 3Dapplications • 24bitcolourdepth • Mountingbracketssupplied • IRemitterandpowersupplyincluded Dimensions (WxHxD) each: 60mmx23mmx115mm/2.3”x0.9”x4.5” Part Number TX-50-Pro WyreStorm Point to Point Extender Sets The perfect solution for simple point to point HD distribution, these extender sets offer excellent flexibility in distribution, control and cable lengths. The new HDBaseT (EX-1UTPIR-100) enables full, high spec HD Distribution, control and Ethernet pass through. The HD over Coax (EX-1COAX-IR-75) and the new HD over Fibre (EX-1FIB-5000) solutions are capable of delivering high specification HD distribution on runs of up to 5 Kilometers (over 3 miles). NEW 30m IR Dual Cat5e/6/7 Extender Set Features: • Upto30mwithoutrepeater • IRSourceControlfromdisplay • 1080psupport • 3Dapplications • 24bitcolourdepth • Mountingbracketssupplied • IRreceiver,emitterandpowersupplyincluded Dimensions (WxHxD) each: 46mmx23mmx83mm/1.8”x0.9”x3.2” Part Number EX-2UTP-IR-30 Dual Cat5e/6/7 Point to Point HD Extenders Features: • Upto50mwithoutrepeater • IRsourcecontrolfromdisplay • 1080psupport • 3Dapplications • 24bitcolourdepth • Mountingbracketssupplied • IRreceiver,emitterandpowersupplyincluded • Bi-directionalIRcapability(onlywhenusedas part of Extender set) Dimensions (WxHxD) each: 60mmx23mmx115mm/1.8”x0.9”x3.3” Part Number EX-2UTP-IR-50 NEW TX-100-HDBT Features: • Upto100msinglecabletransmission • Supportsupto48bitcolourdepth • 1080P/4Kresolutioncapability(4times standard HD) • Deliversuncompressed7.1channeldigital audio (preserved over the cat5e/6/7 cable transmission). • DTS-HDMasterAudioandDolbyTrueHD audio pass through • Full3DSupport • 10/100EthernetinadditiontoHD/Audio/ video and control. • IRemittersandpowersupplyincluded • SupportsallVesaformatsformounting. • Supportsrefreshrates24Hz,30Hz,50Hz, 60Hz Dimensions (WxHxD) each: 152mmx31mmx105mm/5.9”x1.2”x4.1” Part Number TX-100-HDBT Single Cat5e/6/7 Point to Point HD Extenders Features: • PointtoPointHDExtenders • Upto50musingCat5e/6/7 • 1080psupport • 3Dapplications • 24bitcolourdepth • Mountingbracketssupplied • Powersuppliesincluded Dimensions (WxHxD) each: 60mmx23mmx115mm/2.3”x0.9”x4.5” Part Number EX-1UTP-50 NEW Dual UTP DVI (Dual Link) Extender • Onepairasafullfunctionalmodule,nosetting up required • UseUTPLANcable（Cat5e/6/7tosubstitute DVI(DualLink)cabletoachievelongdistance transmission • Transmissiondistancereachesupto30meters under the video format of 2560*1600/60fps • Auto-adjustmentoffeedback,equalisationand amplification, the user does not need to worry about the length of the cable • Suitableforprofessionalhighdefinitiondisplay • HDCPcompliant • LEDindicatorstoshowthepowerandvideo signal status • Mountingearssupplied Dimensions (WxHxD) each: 46mmx23mmx83mm/1.8”x0.9”x3.2” Part Number 8 EX-2DVI-30 US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 www.wyrestorm.com E WyreStorm Point to Point Extender Sets Single Coax 60m Transmission Features: • 60msinglecoaxtransmission(75Ohm) • 720p/1080i/1080presolution • IRsourcecontrolviaIRreceiver(2Way) • IRaccessoriesandpowersuppliesincluded • LockableBNCconnections Dimensions (WxHxD) each: 152mmx31mmx105mm/5.9”x1.2”x4.1” Part Number EX-1COAX-IR-75 NEW HD over Fibre Features: • CapableofdeliveryhighspecHDdistribution on runs of up to 5Km • Auto-adjustmentoffeedback,equalizationand amplification. • HDCPcompliant. • FullHDsupport:[email protected] • Mountingearssupplied. Dimensions (WxHxD) each: 152mmx31mmx105mm/5.9”x1.2”x4.1” Part Number EX-1FIB-5000 Single Coax Cable up to 60m Sender HD Fibre Transmitter 2:1 Splitter HDMI Cable HD SOURCE Receiver HDBaseT Extender Set Features: • Upto100singlecabletransmission –Cat5e/6/7cable • Supportsupto48bitcolourdepth • WideBandIRreceivers • 1080P/4Kresolutioncapability(4times standard HD) • Deliversuncompressed7.1channeldigital audio (preserved over the Cat5e/6/7 cable transmission) • DTS-HDMasterAudioandDolbyTrueHD Audio pass through • Full3Dsupport • Two-wayIRcontrol • RS232Control • 10/100EthernetinadditiontoHD/Audio/ Video and Control). • IRreceiversandemittersincluded. • SupportsallVesaformatsformounting. • Supportsrefreshrates:24Hz,30Hz,50Hz, 60Hz Dimensions (WxHxD) each: 152mmx31mmx105mm/5.9”x1.2”x4.1” Part Number 5 Kilometers over 3 miles EX-1UTP-IR-100 Blu-ray, Cable TV, Games Console etc Transmitter HD Fibre Receiver Receiver Single Cat5e cable (up to 100m) carries: • 1080P/2K/4K • 100Base-T Ethernet • RS232 Serial Control • 2-Way IR (wiring to 568B specification) Screen, Projector, Computer etc European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 9 WyreStorm HD Switchers and Scalers With retrofit installations, customer requirements for multiple devices to connect via single HDMI outputs can be complex and difficult to manage, with different formats and connections to be catered for. The WyreStorm Switchers and Scalers provide the perfect “Get out of jail” solutions. 3:1 Switcher and Scaler Features: • Compactsize • Auto-switching • Manualselectionbutton • Signalingratesupto2.25Gbitsinsupportof 1080P display • Superreceiverequalisationtocompensateup to20mHDMIcablelosses • 3dBdriverpre-emphasistocompensatefor PCB losses • EachportsupportsHDMIorDVIinputs • HDCPcompliant Dimensions (WxHxD) each: 62mmx19mmx62mm/2.4”x0.7”x2.4” Part Number SW-0301 5:1 Switcher and Scaler Features •HDMI1.3bandHDCPcompliant •PlugandPlay,nosoftwarerequired •Transferhighdefinitionvideoanddigital audioviaoneHDMIcable •Signaltransmissionrateupto2.25Gbps •HDMIresolutionupto1080PandUXVGA resolution up to 1920 x 1200 •InputdiscreteIRcodes •SupportsfullHD1080pand1080p/24Hz Dimensions (WxHxD) each: 162mmx19mmx69mm/6.4”x.75”x2.7” Part Number SW-0501 WyreStorm HD Format Converters Providing a solution to integrate older Analogue AV sources into today’s newer screens, or feed into Matrix systems. 8:1 Switcher and Scaler Features • 8inputsto1HDMIoutput • 2xComponent,3xHDMI,2xComposite and 1 x VGA. • Willde-interlaceincominganalogueinterlaced signals to progressive • ManualswitchingorviaIRreceivereye (remote supplied) • Suitablefor3Dapplications • Mountingearssupplied Dimensions (WxHxD) each: 196mmx70mmx35mm/7.7”x2.7”x1.4” Part Number SW-0801 Above: HDMI to DVI Converter Can be used with a Matrix to integrate into amulti-roomaudiosystem 11:2 Switcher and Scaler Features: • MS1102-01Asupports1xVGAsource, 1xS-Videosource,2xAVsources, 2 x YPBPR sources with analog audio, 4xHDMIsourcesand1xDVI-Isourcewith analog audio and digital audio by optical • Digitalaudiohasthepriority(ifbothofthe analog and digital audio are connected) • Theanalogaudiofromtheinputisdigitisedand outputtedtotheHDMIconnectionaswellas the digital audio outs • TheHDMIoutputsalsohaveseparateanalog audiooutput.OneoftheHDMIinputsupports audio 5.1 • Allowsdisplaytoviewanysourceatanytime. • SupportsbypassfunctionunderVGA andDVI-Iport • OneofthefourHDMIinputssupport5.1 channel surround • DVI-Isupportbothanaloganddigitalinputwith L/R and optical • DetachedaudiooutputbyL/Randoptical. • Deliversuncompresseddigitalvideowithzero signal loss • Supporthighdefinitionresolutions1080p, 1080i, 720p and standard video format • Scalesto720por1080p • Canby-passscalingandoutputassource • 10-bittriple-ADCforRGB/YPBPR • Doubleswitchingmodes,IRremoteandmanual • RemotecontrolsfunctionwithRS232 Part Number 10 Features • Highperformanceanaloguetodigital HDMIconverters • Upscalingstandarddefinitionformatsto single cable HD Video and Audio at 720p • HDCPcompliant • Compactdesign RGB/Composite SCART with Stereo Audio to HDMI (720p) EU product only Part Number CON-SCT-HD Component YUV with Stereo Audio to HDMI (720p) Part Number CON-YUV-HD/US VGA with Stereo Audio to HDMI (720p) With VGA pass through Part Number CON-HD-DVI/US Composite with Stereo Audio to HDMI (720p) Part Number CON-CBS-HD HDMI to DVI with Stereo Audio Breakout Part Number CON-HD-DVI/US HDMI to Composite Converter with Audio Breakout Part Number CON-HD-CBS SW-1102 US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 www.wyrestorm.com E WyreStorm Standard HD to HD Matrix A low cost stripped down full HD Matrix Switcher providing a perfect solution for Retail AV, Commercial and Hospitality installations. Features • 2or4outputmodelsviastandardHDMIouts • 4HDMIinputswithEDIDmanagementfeature •6.75Gbpsoutputbandwidth • 1080pcompatible • ControlviafrontpanelIR,manualswitching ordisplaylocation(dedicatedIRleadrequired) • Remotecontrol,IRaccessoriesandmounting brackets supplied • HDCPcompliant • Sourcecontrolviadedicatedcable(notdiscreet) 4 Input / 2 Output Dimensions (WxHxD): 204mmx29mmx95mm/8.0”x1.1”x3.7” Weight: 45kgs 1lbs Power Consumption: 10 Watts Max Part Number Features •4HDMIinputswithEDIDmanagement feature •4HDMIoutputs •Multiplecontrolmethods–IRonfront andrear,IRviaUTPSync,RS232(using extender sets) •ConstantHDCP •Keylockingtoavoidaccidentaloperation •SpecialfixingnutsforHDMIcable •19”standard,1Usize. •Suppliedwith19”rackears •IRaccessories,sourceremoteandpower supplies provided MX-0402-STD 4 Input / 4 Output Dimensions (WxHxD) each: 290mmx26mmx100mm/11.4”x1.0”x3.9” Part Number Cable TV Rack-mounted 4x4 HDMI with RS232 HDMI Cable MX-0404-STD TV Dimensions (WxHxD) each: 442mmx44.5mmx203mm/17.4”x1.75”x8” Weight: 2Kgs/4.4lbs Sat TV Transmitter HDMI to Cat5 Sat TV CCTV Cat5/6 Cable (upto 50m) Receiver Cat5 to HDMI HDMI Cable Part Number MX0404-STD-RS232 TV 4X4 Matrix TV TV Ideal for Commercial applications Sports Bar WyreStorm Extender Provides the ability to extend cable lengths by up to 50m. With UTP through put together with HDMI break out, the RP-2UTP-50IR is a highly flexible product for commercial applications with daisy chain wiring. TV HDMI Cable SOURCE Transmitter Inline Extender In-Line Dual Cable Repeater Features: • IncreasingtransmissionandIRcontrol • 5Vpowersupplyincluded •ForusewithallProMatrix,splittersand extenders Dimensions (WxHxD) each: 60mmx23mmx115mm/2.3”x0.9”x4.5” Part Number TV Inline Extender Inline Extender Inline Extender TV TV TV Inline Extender TV RP-2UTP-50IR Single UTP version (doesnotsupportIRSourceControl) Part Number Cat5 (up to 50m) Inline Extender RP-1UTP-50IR Ideal for Commercial applications Sports Bar European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 11 WyreStorm Standard HD Splitter Range Professional grade single and dual input splitters perfect for Retail AV, Commercial and Hospitality installation. Providing distribution of HD input to many duplicate displays. Given the fact our R&D team work on all of the products across the range, it is possible to mix and match HD Splitters with extender sets to cover large screen installations. Features •Professionalgrade •Full1080psupport • HDCPcompliant •Rangeofmodelstosuitinstall •Canbecascadedtomakelarge distribution system •Compactdesignwithmounting brackets supplied. 1 Input / 2 Output Dimensions (WxHxD): 88mx28mmx68mm/3.4”x1.1”x2.7” Part Number Ideal for Retail AV, Commercial and Hospitality applications SP-0102 1 Input / 4 Output Dimensions (WxHxD): 175mmx24mmx113mm/6.9”x0.9”x4.4” Part Number SP-0104 1 Input / 8 Output Dimensions (WxHxD): 234x31x130mm/9.2”x1.2”x5.1” Part Number SP-0108 1 Input / 12 Output 1 input / 12 Output Splitter Dimensions (WxHxD): 322mmx31mmx160mm/12.7”x1.2”x6.3” Part Number SP-0112 HD Source 2 Input / 8 Output Features •ManualorIRswitchingcontrol Dimensions (WxHxD): 450mmx92mmx231mm/17.7”x3.6”x9” Part Number SP-0208 HD Splitter Range Local Source 1:2 Splitter SP-0102 10m HDMI Cable SP-0104 1:8 Splitter 1:4 Splitter SP-0104 1:12 Splitter SP-0112 SP-0208 12 SW-1102 SP-0104 HD HD HD HD HD HD HD HD SP-0104 HD HD HD HD HD HD HD HD HD HD HD HD OP8 HD HD 1:4 Splitter 1HDMI Cable Per Display HD HD HD HD Part Number 1:4 Splitter 1HDMI Cable Per Display 2:8 Splitter 11:2 Switcher and Scaler 1:4 Splitter 50m Twin Cat5e EX-1UTP-50 Extenders SP-0104 1:4 Splitter SP-0108 Some PC based signage applications may require scaling to traditional screen ratio’s. Consider usingSW-1102forthisrequirement. 10m HDMI Cable Local Source HD 2:8 Splitter SP-0208 HD HD HD HD OP8 HD HD HD 2:8 Splitter SP-0208 50m Twin Cat5e EX-1UTP-50 Extenders US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 www.wyrestorm.com E WyreStorm HD Test Equipment The WyreStorm test range has been developed to assist commercial and residential integrators with the ability to diagnose AV systems and digital connectivity on installations. A particularly useful tool for assessing existing cabling prior to installation. SIGNAL GENERATOR Capable of sending high resolution 2D test patterns the Signal Pattern generator provides EDIDonscreenreadoutviatheDisplayData Channel(DDC).Idealforpinpointinganyissues of interoperability via sources, switches, matrices etc. TEST MONITOR The7”TestMonitorwasdesignedtoprovide digital audio and video feedback on signal outputs in real time. With the ability to replicate EDIDinformationfromanydisplay,the TTMONITORwillrecognizeanyHDMIorDVI sources up to 1080p or 1920x1200 and provide a readout of display output. Dimensions (WxHxD) each: 177mmx114mmx30mmx7’’×4.5’’×1.2” Part Number TTMONITOR Features • 32presetpatterns • 16presetresolutions,7user-defined resolutions and 1 auto resolution • Supportchangeaudiosamplefrequencyand audio sample data resolution. • Supportchangeoutputsignaltype(HDMI/ DVI) • SupportchangeoutputsignalHDCPfunction • Supportchangeoutputsignalcolourspaceand deep colour Dimensions (WxHxD) each: 177mmx114mmx30mmx7’’×4.5’’×1.2” Part Number CAT6 TEST CABLES Thispre-terminated30mCat6UTPcable has been tested and approved for use with theWyreStormpatterngeneratorand7”test monitor to assist integrators with simple testing of extenders and receivers the internal wiring as part of trouble shooting and site surveys. Part Number TTCAT6-30 TTSIGNAL Hints & Tips for HD over Cat5e/6/7 When using the HD Extender Sets, please consider the following hints and tips to ensure the highest quality Video distribution and control: 1) TheWyreStormrangeconformstoTIA568B wiring standards. 6) Dress the cables using low to moderate pressure to ensure smooth signal transmission. 2) Keep the cables as far away as possible from potentialsourcesofEMI(Electricalcables, transformers, light fixtures etc). Cables should haveatleast12”separationfrompowercables. 7) Always label cable runs to ensure ease of maintenance in trouble shooting. 8) Leave extra slack behind walls to ensure cables are not taught. 3) Our products are specified to perform on either Cat5e UTP, however we recommend for best performance, cabling with cat6. 9) 4) When working with existing wiring in a property, look to use extender sets together with the WyreStorm test equipment to ensure you can achieve full signal transmission to each location. Make only gradual bends in the cable where necessary to maintain minimum bend radius. 10)IftestingwithextendersshowsupIRcontrolour Don’t forget, with 1080P signals, the cable will screen resolution issues with standard transmitters be passing up to 10.2Gb/s so cable tolerance is and receivers, look to try the HDBaseT models that essential. have extra distance capability and built in filtering againstEMIandaccessallsortsofmultimedia Always ensure that external receivers are fixed content, such as video, pictures and music stored using the fitting brackets provided. Particularly around the house. importantwhenmountingaroundadjustable brackets. 5) European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 13 COMING SOON ScreenTech In-Wall Waterproof Televisions All ScreenTech televisions are built to the latest regulations in safety and waterproofing and are designed to integrate into a bathroom or any other room where moisture is an issue, such as kitchens, swimming pools, spas, saunas and garden environments. All models feature heated screen areas to prevent display misting in humid conditions and come with master and waterproof/floatable remote controls. ScreenTech have one of the largest ranges of waterproof, flush in-wall televisions on the market, with all models containing RS232 interfaces for connection to home automation systems. They also include a wide range of inputs and features specifically designed for the custom install market, helping to create the ultimate wow factor for hotel rooms and any new build development. All their televisions are of the highest quality with either HD Ready or Full HD screens combined with full 178 x 178 viewing angles. Features •WyreStormMatrixintegration •FullHDorHDReady* •Widescreen(16:9)* •Full178x178viewingangles •RS232Control * depending on model Perfect for use with a matrix installation 14 US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 www.wyrestorm.com E NEW ScreenTech In-Wall Waterproof Televisions ScreenTech 19” Available in: White, Mirror or Black ScreenTech 26” Available in: White, Mirror or Black Part Number WS19HDI-WH(White) WS19HDI-MI(Mirror) WS19HDI-BL(Black) ScreenTech 32” ScreenTech 40” Available in: White, Mirror or Black Part Number WS26HDI-WH(White) WS26HDI-MI(Mirror) WS26HDI-BL(Black) Available in: Mirror only Part Number WS32HDI-WH(White) WS32HDI-MI(Mirror) WS32HDI-BL(Black) Part Number WS40HDI-MI(Mirror) Features ScreenTech 19” ScreenTech 26” ScreenTech 32” ScreenTech 40” Screen Size 18.5” 26” 31.5” 40” Overall size (Hmm X Wmm) 371 x 516 492 x 722 571 x 854 692 x 1049 Cut-OutSize(HmmXWmm) 362 x 507 483 x 713 562 x 845 683 x 1040 Depth 90 115 120 120 Active Area 410 x 230 576 x 324 698 x 392 885 x 498 Aspect Ratio 16:09:00 16:09:00 16:09:00 16:09:00 Viewing Angle U/D 89° x 89° 88° x 88° 89° x 89° 89° x 89° Viewing Angle Left/Right 89° x 89° 88° x 88° 89° x 89° 89° x 89° Brightness 500 Cd/m2 500 Cd/m2 500 Cd/m2 450 Cd/m2 Contrast 1000:01:00 600:01:00 1600:01:00 5000:01:00 Back Light Life >50% 50,000 Hours 50,000 Hours 50,000 Hours 30,000 Hours Display Colours 8 Bit,16.7 Million 8 Bit, 16.7 Million 8 Bit, 16.7 Million 8 Bit, 16.7 Million Number Of Pixels 1366 x 768 1920 x 1200 1920 x 1080 1920 x 1080 Analogue Tuner √ √ √ √ Digital Tuner √ √ √ √ Full SCART (R,G,B) √ √ √ √ Component Video √ √ √ √ HDMI 2 2 2 2 SkyThroughIR √ √ √ √ RS232 Control √ √ √ √ Optional Optional Optional Hard Wired Switch Panel Optional Power RFIn HDMIforIPTV RGB (Y, Pb, Pr) Component HDMI Audio(IN)(aboveY/Pb/Pr) Accessory Socket 24v DC TV coax input X1 5 x phono plugs, R, G, B, L & R (X 2) HDMI(X2) AudioInputForComponentVideoInput For interfacing with WyreStorm equipment Vol Dep Audio out Volume dependant low level stereo audio output IRin/IRout 3.5MMjacksforIRsignalrelayetc. RS232 Facility to control the screen via RS232 protocol* RSPSocket(RJ45) For use with remote switch panel European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 15 WyreStorm Serial Digital Interface Solutions COMING SOON SD/HD/3G-SDI to HDMI Converter ConvertsHD-SDIsourceinputtoHDMIoutput devices. When the source, display and the scaler are powered and connected, video signals are converted to the correct format. Features: • 10-bitresolutionforgreaterprecisionand dynamic range • Proprietary10-bitmotionadaptivevideo de-interlacingwithedgeinterpolationfor HD / SD formats. • Advancednoisereductionanddetail enhancement • Maximumactiveimagesizeof2048samples x 2048 lines PBP processing for various combinations of video and graphics with alpha blending • Fullyintegratedspritebasedmulti-plane OSD controller. • Framerateconversionto/fromany refresh rate • Patternmodew/colourbarsandcross hatch patterns • Colourcorrection • Noisereduction • Detailenhancement • Brightnessadjustment • Gammaselection • Aspectratioselect • Customtimingoutputmode • Gen-lockonboard • AudiotransferfromHD-SDItoHDMI Power Consumption: 20 Watts Part Number CON-SDI-HD COMING SOON SD/HD/3G-SDI 1-to-4 Distributor 4PortSDISplitterallowsasingleSDI,HD-SDIor 3G-SDIvideosourcetobedistributedtoasmany as4Hi-DefSDI/HD-SDI/3G-SDIdevicesat the same time without loss of signal. Crisp, highly defined visuals are generated in NTSC or PAL formats supporting standard and high definition resolutions up to 1080p. Full HD at 60Hz. Features: • HighResolutionDigitalMultiplexer (HD-SDI/HDMIInput) • Multi-Videooutput:1920x1080,1280x1024, 1280x720, 1024x768 • Simultaneousoutput(HDMI,D-SUB,HD-SDI) • Multilanguagesupported • Autosystemrecovery Power Consumption: 55 Watts Part Number 8PortSDISplitterallowsasingleSDI,HD-SDI or3G-SDIvideosourcetobedistributedtoas manyas8Hi-DefSDI/HD-SDI/3G-SDIdevices at the same time without loss of signal. Crisp, highly defined visuals are generated in NTSC or PAL formats supporting standard and high definition resolutions up to 1080p. Full HD at 60Hz. Features: • HighResolutionDigitalMultiplexer (HD-SDIInput) • Multi-Videooutput1920x1080(60Hz) • Simultaneousoutput(HDMI,DVI,D-SUB), Loop Out • Multilanguagesupported • Autosystemrecovery • ControlscreenmodeviaLAN Power Consumption: 70 Watts Part Number SP-SDI-0108 COMING SOON CON-HD-SDI Converterforimportingunrestricted(noHDCP)HDcontentfromHDMI camerasandothervideosourcestoHD-SDIdevicessuchasHDEncoders andfileservers.AudiooutputisavailableasembeddedaudioandviaS/PDIF. Features: • ConvertsHDMItoHD-SDIinrealtimeincludingembeddedaudio+TC • CompatiblewithcamerasanddeckswithHDV,DVandAVCHDformats • Supports720/60p,1080i/60i,486iand576iHDMI .•SupportsYUV4:2:2orRGB4:4:4HDMI/DVI • 50Hzand59.94/60Hzcompatible • OutputSMPTE292M(HD) • Supports720pand1080i(HD) • Assistslong-GOPi.eHDV/AVCHDEditing • EmbeddedaudioonHDSDIorde-embeddedaudioviaS/PDIF audio output (RCA) Power Consumption: 70 Watts Part Number 16 SP-SDI-0104 COMING SOON SD/HD/3G-SDI 1-to-8 Distributor CON-HD-SDI US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 www.wyrestorm.com E Extending HDMI via Cat5e/6 30m, 50m, 100m solutions The guide below helps you select the correct extender for your project. Please note that any reference to distance is a guide only the actual length achieved depends on the quality of Cat5e/6, quality of FJ45 termination, effects of EMI (Electro Magnetic Interference) and fully dependent on the amount of interconnections within the system We always recommend the use of solid copper, Cat5e/6 installation cable. Distances can not be guaranteed when using stranded copper patching cables. 5m 10m 15m 20m 25m 30m 35m 40m 45m 50m 60m 70m 80m 90m 100m 35m 40m 45m 50m 60m 70m 80m 90m 100m 60m 60m 70m 70m 80m 80m 90m 90m 100m 100m 50m 60m 70m 80m 90m 100m IR Dual Cat5e/6/7 Extender Set EX-2UTP-IR-30 1080p Dual Cat5e/6/7 Point to Point HD Extenders EX-2UTP-IR-50 1080p HDBaseT Extender Set EX-1UTP-IR-100 1080p 5m 10m 15m 20m 25m 30m 1080p 1080i IR Dual Cat5e/6/7 Extender Set EX-2UTP-IR-30 1080p Part No Cat5e Distance IR Dual Cat5e/6/7 Point to Point HD Extenders EX-2UTP-IR-30 2 Cables 30m Yes 45m 5m 10m 15m 20m 25m 30m 35m 40m 5m 10m 15m 20m EX-2UTP-IR-50 1080p25m 30m 35m 40m 45m EX-1UTP-50 1 Cables 50m No IR Set IR Dual Dual Cat5e/6/7 Cat5e/6/7 Extender Set HDBaseT ExtenderExtender Set 2 Cables EX-2UTP-IR-50 50m Yes EX-2UTP-IR-30 1080p EX-2UTP-IR-30 1080p EX-1UTP-IR-100 1080p EX-1UTP-IR-100 1 Cables 100m Yes Dual Cat5e/6/7 Point to Point HD Extenders EX-2UTP-IR-50 1080p 1080p 1080i 5m 10m 15m 20m 1080i 25m 30m 35m 1080p 40m 45m HDBaseT No 50m 50m No No Yes Extending HDMI using Single Coax HDBaseT Extender Set IR Dual Cat5e/6/7 Extender Set EX-1UTP-IR-100 1080p EX-2UTP-IR-30 1080p 5m 10m 15m 20m 5m 10m 15m 20m 25m 25m 30m 30m 35m 35m Dual Cat5e/6/7 Point to Point HD Extenders 1080p 1080i Dual UTP DVI (Dual Link) Extender EX-2UTP-IR-50 1080p IR Dual Cat5e/6/7 Extender Set EX-2DVI-30 1080p EX-1COAX-IR-75 1080p HDBaseT Extender Set EX-1UTP-IR-100 1080p 5m 10m 15m 20m 1080P 25m 30m 35m 2K 1080p 1080i 40m 40m 45m 45m 50m 50m 60m 60m 70m 70m 80m 80m 90m 90m 100m 100m 40m 45m 50m 60m 70m 80m 90m 100m Distance IR HDBaseT EX-1COAX-IR-75 1 (75Ohm) 75M 600m 2W IR No 60m 50m 400m 800m 1k 2k 5m 100m 10m 200m 15m 300m 20m 25m 500m 30m 35m 700m 40m 45m 900m 50m 70m 3k 80m 4k 90m 5k 100m IR Dual Cat5e/6/7 Extender Set 1080p 1080i Part No Coax EX-2UTP-IR-30 1080p 1080p 1080i 5m over 10m 15m Link) 20mExtender 25m HD Fibre Dual UTP DVI (Dual EX-1FIB-5000 1080p EX-2DVI-30 IR Dual Cat5e/6/7 Extender Set EX-2UTP-IR-30 1080p 5m 10m 15m 20m 25m 1080p 1080i 2K 1080P Extending DVI 30m 35m 40m 45m 50m 60m 70m 80m 90m 100m 30m 35m 40m 45m 50m 60m 70m 80m 90m 100m 1k 2k 3k 4k 5k 80m 90m 100m 3k 4k 5k 3k 4k 5k Dual UTP DVI (Dual Link) Extender 1080p 1080i EX-2DVI-30 1080p 50m 100m 200m 300m 400m 500m 600m 700m 800m 900m 2K 1080P 5m over10m HD Fibre 15m 20m 25m 30m 35m 40m 45m 50m 60m 70m EX-1FIB-5000 1080p Part No DVI (Dual Link)Cat5e Distance IR HDBaseT Dual UTP Extender EX-2DVI-30 1080p EX-2DVI-30 2 Cables 30M600m 700m No 800m 900m Yes 1k 50m 100m 200m 300m 400m 500m 2k 1080p 1080i HD over Fibre 2K EX-1FIB-5000 1080P 1080p Extending HD over Fibre 1080p 1080i 50m 100m 200m 300m 400m 500m 600m 700m 800m 900m HD over Fibre EX-1FIB-5000 1080p Part No EX-1FIB-5000 1k 2k 1080p 1080i Fibre 1 Cable Distance 5k IR No HDBaseT No European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com 17 www.wyrestorm.com WyreStorm Offices US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 European Office: 6 Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 www.wyrestorm.com Your local supplier is We reserve the right to change specification or product dimensions at any time.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project