PERATOR'S MAN AL
T$
4 V LITHIUM-ION SCREWDRIVER
TWO SPEED/REVERSIBLE
Model No.
315.113980
A
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
Craftsman Consumer Helpline: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
987000-181
09-26-07 (REV:01)
Save this manual for future reference
C
• Warranty ..........................................................................................................................................................................
• Introduction .....................................................................................................................................................................
• General Safety Rules ....................................................................................................................................................
• Specific Safety Rules .......................................................................................................................................................
• Safety Rules for Charger .................................................................................................................................................
• Symbols ........................................................................................................................................................................
• Features ...........................................................................................................................................................................
• Assembly .........................................................................................................................................................................
• Operation ....................................................................................................................................................................
• Maintenance .............................................................................................................................................................
• Accessories ...................................................................................................................................................................
9
9-11
11-12
13
• Exploded View and Parts List ........................................................................................................................................
• Parts Ordering/Service .....................................................................................................................................
13
Back Page
3-4
4
5
6-7
8
2
2
ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL
If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN iT TO ANY
SEARS STORE OR OTHER CRAFTSMAN OUTLET iN THE UNITED STATES FOR FREE REPLACEMENT.
If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.
A
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
A
WARNING!
Read all instructions.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term
"power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
[] Keep work area clean and well lit. Cluttered or dark areas invite accidents.
[] Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
[] Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
[] Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
[] Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
[] Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
[] Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
[] When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
[] Use battery only with charger listed.
MODEL
315.113980
CHARGER
7221701
PERSONAL SAFETY
[] Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious personal injury.
[] Use safety equipment.
Always wear eye protection.
Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
[] Avoid accidental starting.
Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
[] Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
[] Do not overreach.
Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
[] Dress properly.
Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
[] if devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.
[] Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
[] Do not use on a ladder or unstable support.
Stable footing on a solid surface enables better control of the power tool in unexpected situations.
POWER TOOL USE AND CARE
[] Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was designed.
[] Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
[] Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
[] Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
[] Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
[] Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
[] Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
[] Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents.
[] Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
[] Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
[] When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.
[]
Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery, avoid contact.
If contact accidentally occurs, flush with water, if liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
SERVICE
[] Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
_ WARNING!
To reduce the risk of injury, user must read instruction manual.
[] When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.
[] Hold power tools by insulated gripping surfaces
when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.
[] Know your power tool. Read operator's manual carefully.
Learn its applications and limitations, as well as the specific potential hazards related to this power tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
[] Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses.
They are NOT safety glasses. Following this rule will reduce the risk of eye injury.
[] Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
[] Protect your hearing.
Wear hearing protection during extended periods of operation.
Following this rule will reduce the risk of serious personal injury.
[] Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition.
Be aware of possible hazards when not using your battery tool or when changing accessories.
Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
[] Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
[] Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
[] Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
[] Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of
electric shock.
[] For best results, your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F. To reduce the risk of serious personal injury, do not store outside or in vehicles.
[] Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek
immediate medical attention.
Following this rule will reduce the risk of serious personal injury.
[] If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk.
_ WARNING!
READ AND UNDERSTAND ALL
INSTRUCTIONS.
Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
[] Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage.
_1_ CAUTION: To reduce the risk of electric shock or damage to the charger and battery, charge only lithium-ion rechargeable batteries as specifically designated on your charger. Other types of batteries may burst, causing personal injury or damage.
[] Do not use charger outdoors or expose to wet or damp conditions.
Water entering charger will increase the risk of electric shock.
[] Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
[] Do not abuse cord or charger.
Never use the cord to carry the charger. Do not pull the charger cord rather than the plug when disconnecting from receptacle.
Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately.
[] Make sure cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts or otherwise subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury, and damage to the cord, which could result in electric shock.
[] Keep cord and charger from heat to prevent damage to housing or internal parts.
[] Do not let gasoline, oils, petroleum-based products,
etc. come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic.
[] An extension cord should not be used unless absolutely necessary.
Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger.
b. That extension cord is properly wired and in good electrical condition; and c. That wire size is large enough for AC ampere rating of charger as specified below:
[]
Cord Length (Feet) 25' 50'
Cord Size (AWG) 16 16
NOTE: AWG = American Wire Gauge
100'
16
Do not operate charger with a damaged cord or plug, which could cause shorting and electric shock. If damaged, have the charger replaced by an authorized serviceman.
[] Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized serviceman for electrical check to determine if the charger is in good working order.
[] Do not disassemble charger. Take it to an authorized serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
[] Unplug charger from outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.
[] Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It also will help prevent damage to the charger during a power surge.
[] Risk of electric shock.
Do not touch uninsulated portion of output connector or uninsulated battery terminal.
[] Save these instructions.
Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury.
I
PC
NT SAFETY INSTRUCTION
1. SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for battery charger 7221701.
2.
Before using battery charger, read all instructions and cautionary markings on battery charger, battery, and product using battery.
3.
CAUTION: To reduce the risk of injury, charge only lithium-ion rechargeable batteries. Other types of batteries may burst, causing personal injury or damage.
5
=.--=.#_ n o
[]
.../min
@
@
O
,&
@
@
@
Someofthefollowingsymbolsmaybeusedonthis product.Pleasestudythemandlearntheirmeaning.Proper
DESIGNATION/EXPLANATION SYMBOL
V
A mz
W min
NAME
Volts
Amperes
Hertz
Watt
Minutes
Alternating Current
Direct Current
No Load Speed
Class II Tool
Per Minute
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
®
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Safety Alert
No Hands Symbol
No Hands Symbol
No Hands Symbol
No Hands Symbol
Hot Surface
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand operator's manual before using this product.
Always wear safety goggles or safety glasses with side shields and, as necessary, a full face shield when operating this product.
Precautions that involve your safety.
Failure to keep your hands away from the blade will result in serious personal injury.
Failure to keep your hands away from the blade will result in serious personal injury.
Failure to keep your hands away from the blade will result in serious personal injury.
Failure to keep your hands away from the blade will result in serious personal injury.
To reduce the risk of injury or damage, avoid contact with any hot surface.
SYMBOL SIGNAL
DANGER:
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
_,
WARNING:
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, could result
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result
(Without Safety Alert Symbol) Indicates a situation that may result in property damage.
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest SEARS PARTS AND REPAIR SERVICE
CENTER for repair. When servicing, use only identical replacement parts.
_11_ WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call the Craftsman Consumer Helpline at
1-800-932-3188 for assistance.
,_, WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend
Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
PRODUCT SPECiFiCATiONS
Motor .......................................................................
4 V, DC
Switch ..............................................
Two Speed/Reversible
No Load Speed .................................
200/600 r/min. (RPM)
Clutch ................................................................
24 Position
Collet .........................................................................
1/4 in.
Charger Input .....................................
120 V, AC only, 60 Hz
Charge Rate .......................................................
9-12 hours
TWO-SPEED GEAR
TRAIN (HI&O)
TORQUE
ADJUSTMENT RING
LED
WORKLIGRT
CHARGER
SWITCH
TRIGGER
Fig. 1
KNOW YOUR SCREWDRIVER
See Figure 1.
The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all operating features and safety rules.
LED WORKLIGHT
The screwdriver has a built-in LED worklight that illumi- nates when the switch trigger is depressed. This feature is convenient when working in close or tight areas where additional light is needed.
TORQUE ADJUSTMENT RiNG
Your screwdriver has a 24 position clutch. The torque adjustment ring can be turned to select the right amount of torque for the application.
TWO=SPEED GEAR TRAIN
The two-speed gear train is designed for drilling or driving at LO or HI speeds. A slide switch is located on top of your screwdriver for selecting either LO or HI speed.
UNPACKING
This product has been shipped completely assembled.
[] Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
[] Inspect the product carefully to make sure no breakage or damage occurred during shipping.
[] Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
[] If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Screwdriver
Bit Set
Case
Charger
Operator's Manual
,t_
WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.
A
WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
A
WARNING: Always wear safety goggles or safety glasses with side shields when operating products.
Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.
APPLICATIONS
You may use this product for the purposes listed below:
[] Driving screws with screwdriver bits
[] Light-duty drilling
CHARGING THE SCREWDRIVER
See Figure 2.
This tool has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it overnight prior to use. When charging the screwdriver, a red charge light will illuminate on the charger. This red charge light will go off when the screwdriver is fully charged.
NOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (driving screws followed by recharging) for them to become fully charged.
If the charger does not charge the screwdriver under normal circumstances, return both the screwdriver and charger to the nearest Sears or other qualified service center for electrical check.
INPUT
JACK
CHARGERPLUG
Fig. 2
TO INSERT/REMOVE
See Figure 3.
BITS
The collet on the screwdriver is designed to accept 1/4 in. hex bits. Insert the bit into the collet as far as possible until the collet locks on to the bit. To remove a bit, pull the collet forward to unlock the bit, and then pull the bit straight out of the collet.
PULLCOLLETFORWARDTO
REMOVEBiT
_lllilll I::
13-16
17 - 24
For driving screws into hard wood
(LO speed)
For driving large screws
(LO speed)
DRILLING AND DRIVING/REMOVING
See Figure 5.
SCREWS
For driving screws or drilling small holes, depress the "up" arrow on the switch trigger. For removing screws, depress the "down" arrow on the switch trigger.
J
SWITCH
TRIGGER
BiT COLLET
CLICK
Fig. 3
ADJUSTABLE TORQUE CLUTCH
This product is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the size of screw you are using.
ADJUSTING TORQUE
See Figure 4.
There are twenty-four torque indicator settings located on the front of the screwdriver.
• Select the gear train setting to HI or LO speed.
• Rotate the adjusting ring to the desired setting.
• 1 - 4 For driving small screws (HI or LO speed)
• 5 - 8 For driving screws into soft material
(LO speed)
• 9 - 12 For driving screws into soft and hard materials (LO speed)
Fig. 5
TWO-SPEED GEAR TRAIN
See Figure 6.
The screwdriver has a two-speed gear train designed for
LO or HI speeds. A slide switch is located on top of the screwdriver to select either LO or HI speed. When using screwdriver in the LO speed range, speed will decrease and unit will have more power and torque. When using screwdriver in the HI speed range, speed will increase and unit will have less power and torque. When drilling use 1/4 in. hex shank drill bits only. Maximum drill size is 1/4 in.
Use the HI speed setting to drill holes, and use the LO speed setting for driving screws.
TWO-SPEED
GEARTRAIN(HI&O)
TOINCREASE
TORQUE
TO DECREASE
TORQUE
ARROW
TORQUE
ADJUSTMENT
RiNG
Fig. 4
10
Fig. 6
LED WORKLIGHT
See Figure 7.
The screwdriver has a built-in LED worklight. This feature is convenient when working in close or tight areas where additional light is needed. Whenever the switch trigger is depressed, the LED worklight will illuminate.
NOTE: During normal operation, if the LED worklight will not illuminate, charge the screwdriver.
LED
WORKLIGHT
Fig. 7
WARNING: When servicing, use only identical
Craftsman replacement parts. Use of any other part may create a hazard or cause product damage.
,ik
WARNING: Always wear safety goggles or safety glasses with side shields when using compressed air to clean products.
If the operation is dusty, also wear a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a Sears Service Center.
11
BATTERIES
This tool is equipped with lithium-ion rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.
The batteries in this product have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.
To obtain the longest possible battery life, we suggest the following:
[] Remove the tool from the charger and unplug the charger once it is fully charged and ready for use.
For tool storage longer than 30 days:
[] Store the tool where the temperature is below 80°R
[] Store the tool in a "discharged" condition.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
See Figure 8.
TO REMOVE:
[] Remove the screws securing motor housing cover, then remove cover.
[] Lift batteries from motor housing enough to expose leads and battery terminals.
[] Disconnect the red lead from the battery by pulling apart as shown.
[] Disconnect the black lead from the battery by pulling apart as shown.
[] Remove the battery for disposal.
SCREW(S) MOTOR
HOUSING
A
WARNING: Upon removal, cover the battery pack's terminals with heaw-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components.
Lithium-ion batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.
I%
This product contains lithium-ion batteries. Local, state or federal laws may
To preserve natural resources, please prohibit disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding available recycling and/or disposal options.
12
[] No.2 Phillips
/ 8-10 Slotted, 2 Ea.
[] No. 3 Phillips / 6-8 Slotted, 2 Ea.
[] 5-Pc. Hex Shank Drill Bit Set
[] 6-Pc. Extra Length Magnite Power Bit Set
A
[] 7-Pc. Screwdriver Bit Set and Case
[] 13-Pc. Power Screwdriver/Nutdriver Set and Case
[] 17-Pc. Power Screwdriver/Nutdriver Set and Case
[] 30-Pc. Power Screwdriver/Nutdriver Set and Case
WARNING: Current attachments and accessories available for use with this product are listed above. Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
_" CRAFTSMAN 4.0 VOLT SCREWDRIVER MODEL NO. 315.113980
The model number will be found on a plate attached to the motor housing. Always mention the model number i
J
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
Key
No.
Part
Number
7221701
120790001
580305008
987000181
PARTS LIST
Description
Charger ............................................................................................................
Bit Set (Not shown) .........................................................................................
Carrying Case (Not shown) .............................................................................
Operator's Manua(
Qty.
1
1
1
13
Your Home
For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it!
For the replacement parts, accessories and owner's manuals that you need to do-it-yourse If.
For Sears professional installation of home appliances and items like garage door openers and water heaters.
1-800-4-MY-HOME ® (1-800-469-4663)
Call anytime, day or night(U.S.A, and Canada) www.sears.com
www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment, and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Service Center
1-800-488-1222
Call anytime, day or night (U.S.A.
only)
www.sears.com
To purchase a protection agreement (U.S.A.) or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas:
1-888-SU-HOGAR ®
(1-888-784-6427)
Au Canada pour service en fran_;ais:
1-800-LE-FOYER Mc
(1-800-533-6937) www.sears.ca
® Registered Trademark /
T[V
' Trademark / SM Service Mark of Sears Brands, LLC
® Marca Registrada / TM Marca de Fabrica /
SM
Marca de Servicio de Sears Brands, LLC
MC Marque de commerce / MD Marque depos6e de Sears Brands, LLC © Sears Brands, LLC
