ENFORCER SLI 820R-4 Specifications

ENFORCER SLI 820R-4 Specifications
ENFORCER ®
2009 Vehicle Catalog
CODEBUMP TOP-OF-THE-LINE VEHICLE ALARM
ENFORCER 640 PLUS
Uses CODEBUMP code-hopping technology to defeat
“code grabbers.” 3 auxiliary channels for controlling
options. On-board relays for door locks, plus 16
programmable functions make installation simple.
4-Channel Alarm Brain with CODEBUMP Technology.
Two 4-Button “Icon” Remotes.
Dual-Stage Electromagnetic Shock Sensor (Patented).
Multi-Tone Siren and Horn-Honk.
7-Function LED.
Multi-Function Valet Push Button.
Built-in Flashing Parking Lights Relay.
Included
Built-in Door Lock Relays.
Two 4-button “icon” remotes.
Starter Disable Output.
Patented dual-stage Domelight Supervision Output.
electromagnetic shock sensor.
Multi-tone siren.
16 Programming Functions.
LED.
Optional Plug-In Extended Range Antenna 7-Function
Multi-function push button.
(SK-91ERSD) for Range up to 1,000 ft.
Starter disable socket.
Heavy-duty pin switch.
FULL-FEATURED VEHICLE ALARM
ENFORCER 300L
Features built-in dual-stage glass break sensor (with remote
microphone) and dual-stage shock sensor. Built-in starter
disable relay and flashing light relay. Outputs for door lock/unlock and domelight supervision. Offers driver priority door unlock output and 2 auxiliary channels.
Miniature Alarm Brain.
Two 3-Button Remotes.
Dual-Stage Electromagnetic Shock Sensor (Patented).
Dual-Stage Glass Break Sensor.
Multi-Tone Siren.
5-Function LED.
Included
Multi-Function Push Button.
Two 3-button remotes.
Multiple Trigger Inputs.
Patented dual-stage Built-in Flashing Parking Lights Relay.
electromagnetic shock sensor.
Door Lock Outputs (+ or -).
Remote microphone for built-in dual-stage glass break sensor.
Built-in Starter Disable Relay.
Multi-tone siren.
Domelight Supervision Output.
5-Function LED.
Multiple Programming Functions.
Multi-function push button.
2
www.seco-larm.com
ENTRY-LEVEL VEHICLE ALARM
ENFORCER 100LB
Entry-level alarm system that comes with the features
most consumers require. Built-in flashing light relay.
Outputs for door lock/unlock and starter disable.
Includes 2-stage shock sensor.
Miniature Alarm Brain.
Two 4-Button “Icon” Remotes.
Over 68 billion (6.8 x 1010) possible codes.
Dual-Stage Electromagnetic Shock Sensor (Patented).
128dB Multi-Tone Siren.
5-Function LED.
Multi-Function Push Button.
Included
Instant Triggering.
Two 4-button “icon” remotes.
Built-in Flashing Parking Lights Relay.
Patented dual-stage electromagnetic shock sensor.
Door Lock Outputs.
Multi-tone siren.
Starter Disable Output.
5-Function LED.
Multiple Programming Functions.
Multi-function push button.
ANTI-CARJACK VEHICLE ALARM
ENFORCER 200H
Anti-carjack system helps protect car owner by letting
carjacker drive away before activating. Includes 2nd
channel RF output and flashing parking light relay.
Outputs for door lock/unlock, and starter disable.
Miniature Alarm Brain.
Two 2-Button, 2-Channel Remotes.
Over 68 billion (6.8 x 1010) possible codes.
On-Board Dual-Stage Electromagnetic Shock Sensor (Patented).
Multi-Tone Siren.
6-Function LED.
Multi-Function Push Button.
Instant Triggering.
Built-in Flashing Parking Lights Relay.
Door Lock Outputs (+ or -).
Starter Disable Output.
Programmable Anti-Carjack.
Multiple Programming Functions.
Included
Two 2-button remotes.
Patented dual-stage electromagnetic shock sensor built in (fully adjustable).
Multi-tone siren.
6-Function LED.
Multi-function push button.
Carjack function toggle switch.
3
ENFORCER ®
2009 Vehicle Catalog
KEYLESS ENTRY/ALARM SYSTEM
ENFORCER SLI 840
Slimline “icon” style remotes help customers quickly learn the unit’s operation. Can
be used as a deluxe keyless entry or a full-featured alarm. Port for dual-stage shock
sensor plus both siren and horn honk outputs make this system extremely versatile.
Miniature Alarm Brain.
Two 4-Button, “Icon” Remotes.
Plug-in Port for Optional Sensors.
Multi-Tone Siren and Horn-honk ouputs.
7-Function LED.
Multi-Function Push Button.
Flashing Parking Lights (- output).
Door Lock Outputs (+/- reversing).
Starter Disable (- output).
Domelight Supervision (- output).
13 Programming Functions.
FACTORY KEYLESS ENTRY UPGRADE
ENFORCER SLI 820R
The SLI 820 connects to most vehicles’ factory keyless entry systems. It provides a low-cost yet
effective security system which is armed and disarmed using the customer’s existing OEM remotes.
Easily turns most factory keyless entry systems into complete security systems.
Uses the vehicle’s OEM remotes to arm and disarm system.
Automatically learns the polarity of the vehicle’s door locks for simple installation.
Includes dual-stage electromagnetic shock sensor.
Built-in parking light relay.
Starter disable output.
Push-button included for valet and emergency disarm.
Status LED.
Siren (+) and horn (-) outputs.
5 instant-triggering zones.
3 Programmable functions.
BASIC KEYLESS ENTRY
ENFORCER SLI 830
This stand-alone keyless entry system makes installation simple,
with on-board relays for doorlocks and domelight supervision.
Two “Icon” remotes with up to 200 feet range:
On-board relays for Lock and Unlock.
On-board relay for choice of Domelight Supervision or Parking Light Confirmation:
Programmable door lock timing (0.5 sec. / 3.5 sec.).
SELF-CONTAINED ALARM SYSTEM
CBA 33
An easy-to-install, self-contained vehicle security system built within a miniature 3-1/2” x 3-1/2”
siren. Install in a vehicle with as few as 3 wires. Outputs for LED and starter disable. On-board
is a patented 2-stage electromagnetic shock sensor. With battery backup capability.
Self-contained, all-in-one design.
Two 2-button remotes.
Complete vehicle protection.
On-board dual-stage shock sensor (patented).
Built-in, high-output siren.
5-Function LED included.
4
Emergency Disarm/Valet.
Instant triggering.
Reliable current sensing.
Backup battery capability.
Extremely easy installation.
Low power consumption.
www.seco-larm.com
PASSIVE PROXIMITY IMMOBILIZER
SLI® 761PP-ISS The SLI 761PP-ISS Passive Proximity
Immobilizer combines high security
with completely passive arming and
disarming. Just attach the mini controller
to the key chain. Each time the driver
turns the ignition on to start the engine,
the immobilizer automatically reads the
controller, disarms, turns off the flashing
LED, and allows the vehicle to start.
This makes the SLI 761PP-ISS the
most advanced and convenient vehicle
security system ever!
Code learning, with Master Dealer Controllers.
Two controllers included with each unit.
Immobilization of two electrical circuits.
Output for third immobilization circuit (relay required).
Fully automatic arm and disarm.
Unique security code for valet/override mode.
Flashing status LED.
Mini tamper-proof housing with all black wires.
Installer test mode to help locate the best mounting position for the main brain’s transceiver coil.
TOUCHKEY IMMOBILIZER
SLI® 760FP-ISS
The SLI 760FP-ISS Touchkey
Immobilizer combines high security
with the convenience of completely
passive arming. To arm, turn off the
ignition. 30 seconds later, up to two of
the car’s electrical circuits are disabled.
To disarm the system, insert the
Touchkey momentarily into the Touchkey
receptacle. The vehicle must be started
within 30 seconds or the Immobilizer will
rearm.
Code learning, with Master Touchkey Controllers.
Two Touchkeys included with each unit.
Handsomely crafted backlit receptacle.
Immobilization of up to two electrical circuits.
Fully automatic arming 30 seconds after ignition is turned off.
Unique security code for valet/override mode if Touchkey is lost or stolen.
Flashing status LED.
Mini tamper-proof housing with all black wires.
VEHICLE PAGER SYSTEM
SECOPAGE 35EV
Tr mi
Monitors up to 2 zones per vehicle, plus manual paging.
Manual paging button included.
Connect to nearly any type of vehicle alarm.
Miniature size: Easily concealed inside car.
Positive and negative instant triggers.
Range up to 2 miles, depending on environment, installation, and/or antenna (use CB, car AM radio, or optional strip antenna).
Strip antenna sold separately (E-35ANT).
Over 1 million possible coding combinations.
Automatic power antenna control.
lt li
e iver:
One vibrating receiver included with each system.
Code learning receiver learns the codes of up to 3 transmitters.
Alphanumeric display indicates which zone (1, 2, or manual) of which vehicle (A, b, or C) was triggered.
EEPROM stores codes up to 1 year without power.
6-page memory.
Unattended page indicator.
Low battery indicator (2 AAA batteries not included).
Additional receivers sold separately (models E-35RD and E-35RV).
5
ENFORCER ®
S ENS
2009 Vehicle Catalog
UA ST
OC
SH-532L
SS-052B
3-tones.
128dB multi-tone.
Miniature size, 4” long, 3½” diameter.
6-12VDC, 1.4A current drain.
Dual-stage electromagnetic shock sensor (patented).
Dual-stage protection - Chirps siren if car lightly tapped, triggers alarm on break-in or vandalism attempts.
Modular plug for fast installation.
SH-715
NSOR
“Y” CONNECTOR
RUNK R
AS
SR-5911
Add power trunk release to cars without factory-installed systems.
Connect via relay to any alarm’s auxiliary channel output.
IG
ASH NG R
AY
SR-5102-PW
SR-199-315
Back-up battery siren.
120dB single-tone siren. Negative & positive trigger inputs.
Backup battery can sound siren about 30 minutes, fully recharges in about 10 hours.
Key switch for OFF, TEST, and ON modes. Includes 2 keys, rechargeable batteries.
In the “ON” mode, the siren charges the battery and will sound immediately if the alarm is triggered or if the siren’s main power line is disconnected.
Miniature size, 3½” long, 3½” diameter. 6-12VDC, 1.2A current drain.
N W CHES
SS-066TL
European-style pin switch with nylon/fiberglass shaft and brass body. Adjustable for different heights.
Lets multiple dual-stage sensors connect to one vehicle alarm.
Saves installation time.
Works with the SLI 259A, SS-052B, and SS-051ME.
DOO LOCK O OR
SR-5202-ME
Add power door lock convenience to cars without factory power door lock systems.
2-wire (slave) door lock motor.
M
OWAV S NSO
SLI® 259A
Ideal for vehicles with cloth or open tops, or open sunroofs.
Dual-stage protection - Chirps siren if exterior zone violated (someone gets too close to car), triggers alarm if interior zone is violated (break-in or vandalism attempt).
Modular plug for fast installation.
G ASS REAK EN OR
SS-051ME
Includes remote microphone with 3’ long cable for easy mounting & concealment inside the car.
Dual-stage protection - Chirps siren on light tap of window, triggers alarm on break-in.
Modular plug for fast installation.
6
ACKU
A ERY YS E
SR-5209 & X-UBA-UB1270
OO LOCK N E FACE
SR-5201R/SR-5203A
SS-061LSN
Patented heavy-duty long steel body with nylon fiberglass shaft and stainless steel contact terminal.
Designed so terminal is always secure. Included with certain ENFORCER alarms.
Flashes car’s lights or honks horn when the siren chirps or sounds.
Pre-wired relay with two 15A outputs, for flashing lights in any car, including dual-circuit European systems.
Connects to any alarm’s siren output.
5 wires, programmable 30 or 60 flashes/minute, programmable for instant (for lights) or delay (for horns) output.
Allows nearly any alarm to control nearly any type power door lock/unlocks.
Includes 2 pre-wired, built-in, heavy-duty 30A relays with protecting diodes and spike/noise suppressors.
Negative lock/unlock signal inputs.
5
–For alarms with specific separate negative lock/unlock signal outputs. No built-in timer – depends
on alarm system for lock/unlock timing.
5
– For alarms with no specific lock/unlock signals. One-or two-wire input. Built-in programmable (0.7/3.5-sec.) timer. Lock signal priority if lock and unlock signals received at same time.
OWE W NDOW ODULES
SR-5220A /SR-5440A
Compatible with most power window systems. Works off
momentary or constant ground trigger.
System override if ignition is turned on, doors unlocked, or any door opened.
Interfaces with all ENFORCER RF alarm systems.
2-Window module.
A 4-Window module.
Supplies power to alarm if car’s main battery is destroyed or drained, or if main power line is cut.
Triggers the siren if the alarm’s power is cut.
Chirps siren if car’s headlights are left on after engine shut off.
Automatically charges backup battery (battery not included).
Backup battery does not drain when car is running, and is not affected by road vibration.
B 7 – 7 Amp hour battery for use with X
the SR-5209. (SR-5209 and X-UBA-UB1270 are sold separately.)
R LA
X-187-037SC
SPDT, 12V, 30A/40A heavy-duty automotive relay.
For starter disable, flashing lights, door locks, trunk release, more.
RE AY SOCKET
SR-5150-C
Sealed on bottom with water-resistant rubber grommet.
Pre-wired (5 wires) for 1 SPDT relay (relay not included).
For open- or closed-circuit operation.
www.seco-larm.com
RF T
RF eceiv
e
SK-919TD1S-UP
Use with all SECO-LARM receivers.
Up to 500 ft. range. 315MHz.
10
Over 68 billion (6.8 x 10 ) possible codes.
LED transmission indicator.
Includes 12VDC alkaline battery.
SK-919TD2A-UP
Use with all SECO-LARM receivers.
Up to 500-ft. range. 315MHz.
10
Over 68 billion (6.8 x 10 ) possible codes.
LED transmission indicator.
Includes 12VDC alkaline battery.
11 to 24 VAC/VDC operation, 10A @ 24VDC relay output.
3-button ultra-slim-line
design transmitter.
SK-919T4J
4-button ultra-slim-line design transmitter.
SK-917T4J
4-button CODEBUMP
anti-codegrabbing transmitter.
CBA 19TD2
2-button transmitter for CBA 33.
Extend range for SECO-LARM RF receivers.
Plugs into receiver.
Includes 9 ft. cable.
F W re
s Co t o
11 to 24 VAC/VDC operation, 2 x 10A @ 24VDC relay outputs.
Control garage doors, house lights, alarm panels, or other devices via remote.
Compatible with all SECO-LARM transmitters.
Outputs are programmable for 4-sec. momentary (default), 1-sec. momentary, toggle, or validity.
Two LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.
SK-919TP2D-F
2-Button Footswitch Transmitter
SK-910R4
11 to 24 VAC/VDC operation, 4 x 10A @ 24VDC relay outputs.
SK-915LP
Control garage doors, house lights, alarm panels, or other devices via remote.
Compatible with all SECO-LARM
transmitters.
Outputs are programmable for timed, toggle, latching, or validity modes.
Four LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.
m e
Rubber buttons eliminate damage caused by electrostatic discharge. Gold-plated battery clips and contact points extend the life of the transmitter.
Operates up to 500 ft. (150m).
Includes two 3VDC lithium batteries and visor clip.
Compatible with all SECO-LARM receivers.
1
3
1
Slimline design: 3 /2” x 2 /16” x /2” (89 x 56 x 12 mm).
SK-910R2
SK-919TP1H-BU -- 1 Button
SK-919TP2H-NU -- 2 Buttons
SK-919TP4H-NU -- 4 Buttons
Control garage doors, house lights, alarm panels, or other devices via remote.
Compatible with all SECO-LARM transmitters.
Output is programmable for 4-sec. momentary (default), 1-sec. momentary, toggle, or validity.
LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.
2-Button Desktop Transmitter
SK-915BA
Leather Pouch for SK-919TD1S-UP.
n
SK-919TP2D-P
12VDC alkaline battery for all
SECO-LARM transmitters.
de R ge A
SK-91ERSD - 1,000 ft. max. range
SK-910R
SK-919T3J
Ex
n e R
ran
For remote activation of locks, cameras, etc. from a desk or other location.
Use in offices, factories, etc. Portable - Easily moves from one location to another.
Attractive heavy-duty aluminum case.
Up to 500 ft. range.
Includes rechargeable battery and power adapter.
Compatible with all SECO-LARM 315MHz receivers.
er
SK-9HBC
Belt-clip holster for slimline handheld transmitters.
X-930-089
3VDC Lithium Battery for handheld transmitters.
Battery
Belt-Clip Holster
7
ENFORCER ®
2009 Vehicle Catalog
e Pl e B
C
e
Four versions available: Camera Only, Camera with
Backup Sensors, Wired, Wireless Version.
Stylish heavy-duty chrome plated frame, complements any vehicle.
Wide angle lens. Adjustable angle on the camera (up and down).
Backup sensor version has 2 backup sensors to detect people, pets or other objects. Audio alarm included.
Wireless version frequency is 350MHz.
F
M
n V da
Camera without
backup sensor
Camera with
backup sensor
Wired Camera without backup sensor,
or Wireless Camera without backup sensor
Wired Camera with backup sensor,
or Wireless Camera with backup sensor
Mo e DVR
e
Low profile design for vehicle interior installation.
Rugged vandal resistant construction.
1/3” Sony CCD 420 TV Lines.
Lens rotates to obtain
the perfect angle.
F
Mo t
B c
C
Weatherproof and vandal proof.
9 IR LED’s for 0 LUX operation.
Auto Gain Control (AGC).
Auto White Balance.
Back Light Compensation (BLC).
h Mo
a Co o C m
EV-122C-FVB3Q (White Case)
True Day/Night operation.
1/3” Sony Super HAD CCD.
0.1 lux. 420 TV Lines.
Lens rotates for ceiling or wall mount.
3.7mm Pinhole Lens.
(silver case) E 1
also available.
2 LED
Mi V
EV-122C-DVC3
Vandal resistant case.
Wall or ceiling mount.
1/3” Sony CCD.
420 TV Lines, 3.6mm lens.
21 IR LEDs. 50 ft. range.
Weatherproof
for outdoor use.
1
Mini size: 3” x 4 /4”.
Non-IR version available:
Day/
Night
C l D
The SECO-LARM 8-Channel MDVR (Mobile Digital
Video Recorder) is an intelligent MPEG-4 MDVR
specifically developed to meet the rigorous requirements
of a transportation surveillance system. Built with an
anti-vibration mechanical structure, the SECO-LARM
MDVR also incorporates robust electronic components
for operating in a wide range of harsh environments.
The SECO-LARM MDVR incorporates many necessary
features for vehicle applications in addition to the general
surveillance functions offered by a regular DVR. Users
can locate the vehicle’s position and record the speed
and route of the trip by plugging a GPS receiver into the
RS-232 port, and/or wirelessly send messages out with a
GSM transceiver connected through the USB interface.
50' range
8
VW
8 Video inputs.
8 Alarm channels for event logging.
Power input: 9~30 VDC, 4A.
Power output: 12VDC, 2.5A used for powering additional accessories.
VGA and S-Video monitor outputs.
Stereo audio in and audio out jacks (RCA).
Network port (standard RJ-45 Ethernet port).
Supports DHCP and PPPoE.
Triplex+ Operation: Live, Record, Playback, Network.
Per channel configuration.
Multi-language support.
Digital zoom 2x2.
Supports pre-alarm recording
SECO-Remote™ for remote monitoring.
Export AVI file for Microsoft ® Media Player.
Supports GPS for route tracking
Supports GSM for sending short message.
Ideal for:
l Taxis
l School Buses
l Public Transit Vehicles
l Cash Collection Vehicles
l Delivery Vehicles
Built-in Network Attached Storage (NAS) port (standard RJ-45 Ethernet port).
3 USB 2.0 ports
Removable HDD Cartridge (Supports 1 x 2.5” SATA HDD).
RS-232C and RS-485 ports.
NTSC/PAL compatible.
On-Screen display (OSD) for setup.
www.seco-larm.com
C A Se s D
VD-10BNA
Dummy Box Camera
Realistic box camera with battery-powered LED to give it an authentic look.
Includes video/power cable (one cable).
Requires 2 AAA batteries.
Constructed of strong ABS plastic.
VD-10BN
Dummy Security Camera
y Ca e
VD-10PL
VD-40BN
For detering crime at home, in an office, in a parking lot, and around playgrounds.
IR LEDs turn on automatically in the dark and turn off in light.
Requires optional power adapter for LEDs.
A realistic camera with a battery-powered LED to give it an authentic look.
Indoor/outdoor use.
Weatherproof ABS plastic housing.
Metal wall mount bracket included.
Requires 2 AA batteries.
Threaded conduit fittings allow for extended mounting.
VD-30BS
VB-HC1
Dummy IR Bullet Camera with Real
Working IR LEDs.
Dummy IR Bullet Camera
A realistic camera with a battery-powered LED to
give it an authentic look.
Includes video and power cable.
Indoor/outdoor use.
Metal mounting bracket included.
Requires 2 AA batteries.
Weatherproof metal housing constructed of aluminum.
VD-20NN
Dummy Dome Camera
Ceiling Mount Bracket
for PTZ Speed Dome
For real or dummy PTZ speed dome cameras.
9” pipe with hole for easy access to wires.
Threaded conduit fittings.
D
y Keyp d
A realistic camera with a video/power cable to give it an authentic look. Metal mounting bracket included.
Battery-powered LED.
Requires 2 AA batteries.
Constructed of strong ABS plastic.
2009 S CO ARM C
Incorporates a realistic camera module to give it an authentic look.
Constructed of strong ABS plastic.
Dummy PTZ Speed Dome
o
The 2009 SECO-LARM Burglar Alarm Catalog
is now available.
To order a copy or to be put on our mailing list,
e-mail us at [email protected], fax us at
(949) 261-7326 or call us at (800) 662-0800 or (949) 261-2999 for California or International.
KD-100Q
Keypad LEDs flash.
Keypad “beeps” when keys are pressed.
Weather-resistant for outdoor use.
Uses 2 or 4 (AAA) batteries.
SECO-LARM makes no warranties expressed or implied that dummy cameras will prevent any criminal or inappropriate activity. SECO-LARM disclaims any and all
liability for any damages to property or persons as a consequence of the purchase or installation of dummy cameras. For additional details contact SECO-LARM.
9
ENFORCER ®
V de B un
v V d o, o r D
SECO-LARM video baluns are the fast, easy,
and low-cost way to connect a CCTV camera
to a monitor, multiplexer, or video recorder
using low cost Cat5e/6 cable. Two video baluns are normally used, one on
each end of a pair in the Cat5e/6 cable. A
Cat5e/6 cable has 4 pairs of wire inside, so 4
channels of video information can be carried
on a single Cat5e/6 cable.
All SECO-LARM passive video baluns transmit
the video signal of a single CCTV camera long
distances over low-cost Cat5e/6 (or better)
unshielded twisted pair (UTP) cable.
P
ve V eo
2009 Vehicle Catalog
l
( D
video signal up to 2,000 ft. (610m) or color up to 1,300 ft. (400m).
Transmits video, power, and data over Cat5e/6.
Built-in dual-color LED indicates power and polarity.
Removable terminal blocks.
EVT-PB1-318Q Same as EVT-PB1-31RQ, but with RJ-45 connector instead of terminal block.
e C e te
Gold-plated BNC connector.
Screwless terminal block for
easy installation.
Transmit range: 2,000 ft. B/W, 1,300 ft. color.
EVT-PBP-V1TQ
6-inch BNC pigtail connector.
Gold-plated BNC connector.
Screw terminals for reliable installation.
Transmit range: 2,000 ft. B/W, 1,300 ft. color.
Built-in surge protection.
Gold-plated BNC connector.
Screw terminals for reliable installation.
Transmit range: 2,000 ft. B/W, 1,300 ft. color.
EVT-PB1-V1TGQ
Gold-plated BNC connector.
Built-in ground loop isolation.
Removable terminal block.
Built-in surge protection.
Transmits B/W signal up to 980 ft.
S p
P
ve V eo
EVT-PBM-V17Q
/16" x 5/8" hole in a single-gang plate.
Transmit
range: Up to 2,000 ft. (610m).
RJ-45 connector.
9
10
Female gold-plated BNC, fits a /16" x 5/8" hole in a single-gang plate.
Transmit
range: Up to 2,000 ft. (610m).
RJ-45 connector.
9
EVT-PC4P-JTQ
4-Port Power Disbribution Card
converts 24VAC to 12VDC (0.5A).
Video, power and data over Cat5e/6.
Gold-plated BNC connector.
Built-in dual-color LED indicates power and polarity.
Built-in DC-plug power connector and data wire.
lu w olt ge o e
EVT-PB1-H05Q drops over long cable runs.
Input voltage: 7~24 VDC.
Output voltage:
12 or 24 VDC jumper selectable ranges.
Vernier adjustment within each range.
Output current: 500mA @ 12/24 VDC.
Video, power and data over Cat5e/6.
Gold-plated BNC connector.
Built-in dual-color LED indicates power and polarity.
Built-in DC-plug power connector and data wire.
D B n Go
EVT-PB1-31RGQ Video, power, and data over Cat5e/6.
Built-in ground loop
isolator to prevent
grounding interference.
Built-in dual-color LED indicates power and polarity.
*VPD - Video, Power, and Data.
C B
Loop
H
EVT-PC8-VTDQ
C rd
P
8-Port Video Balun Card
2000 ft. (610m) video range.
Built-in voltage booster.
Compensates DC voltage Male gold-plated BNC, fits a EVT-PBM-V27Q
2,000 ft. (610m) video range.
Built-in power converter e
EVT-PB1-V1TSQ
Connects up to 4 CCTV cameras (per PCI card) to
a central location using low-cost Cat5e/6 UTP cable.
Range: Up to 2,000 ft. (610m).
Simplifies and organizes PC-based DVRs.
Works with all SECO-LARM passive video baluns.
Feeds camera signals to nearly any standard DVR.
Video card is passive – no power required.
Optional power distributor card.
Includes a 12VDC, 4A power adaptor.
Tri-Color LED indicates polarity and power present.
Removable terminal blocks for easy installation.
EVT-PB1-L05Q EVT-PB1Q
o
4-Port Video Balun Card
Transmits a monochrome B
C ds
EVT-PC4-VT2Q
EVT-PB1-31RQ ive
PC B u H
n
Connects up to 8 CCTV cameras (per PCI card) to a central location using low-cost Cat5e/6 UTP cable.
Range: Up to 2,000 ft. (610m).
Simplifies and organizes PC-based DVRs.
Works with all SECO-LARM passive video baluns.
Feeds camera signals to nearly any standard DVR.
Video card is passive -- no power required.
t
EVT-PC8P-JTQ 8-Port Power Disbribution Card
Includes a 12VDC, 6A power adaptor.
Tri-Color LED indicates polarity and power present.
Removable terminal blocks for easy installation.
www.seco-larm.com
NC o VGA onve e
VC-1BAQ
Vd o Ds
VA-1102B-WQ
CCTV Acc
or
o e
CA-161R
(1 Input, 2 Outputs)
DC plug to terminal block.
EVA-CB0R1Q
Converts almost any LCD
monitor into a security monitor.
NTSC or PAL input.
Video input auto-configure.
On screen display (OSD) functions: color, contrast, and brightness.
Compact size, perfect for plug & play installation.
Desktop or wall mountable.
Input connector: BNC.
Output connector: VGA (DB15 VGA connector).
Output: NTSC: 640 x 480, PAL: 768 x 576.
Power: 300mA @ 5VDC.
Dimensions: 53/4'' x 25/8'' x 11/16''
(145 x 67 x 27 mm).
Power adapter included.
V deo m
VA-2101B-WQ
e
(1 Input, 1 Output)
BNC-to-RCA Connector.
Gold-plated connectors.
VA-1104B-WQ (1 Input, 4 Outputs)
EVA-WB0B1-08
6” Male-to-Female BNC connector.
Gold-plated BNC connector.
Distributes single video input to multiple video outputs.
Compatible with color or black/white signals.
NTSC or PAL compatible.
Connect to video camera, multiplexer, VCR, DVR, etc.
LED to indicate power.
Power: 12VDC or 24VAC.
Power adapter included.
g
Co e to s
EVA-F5521-T
Black/Red Wires
EVA-F5521-3
(4 Inputs, 4 Outputs)
RJ-45 Male to Terminal Block with 2” cable.
CA-1616-Q
DC Plug-to-Plug Adapter.
CA-1515-Q
DC plug with screw terminals.
VA-2404B-WQ
CA-171T-02Q
DC Jack-to-Jack Adapter.
CA-1526-1FQ
DC Jack to Double DC Plug, 1 ft. Wires.
DC plug pigtail connector, 3 ft.
EVA-M5521-3
DC jack pigtail connector, 3 ft.
CC
The ENFORCER Video Amplifiers are the ideal
way to boost the strength of video signals. Using
the included 12VDC power adapter, video signals
are amplified for transmission distances of up
to 3,280 ft. (1,000m). Brightness and sharpness
adjustments can be made independently for each
channel to provide fine tuning of video signals.
Compatible with both color and B/W signals.
Transmission distance up to 3,280 ft. (1,000m).
Connect to a video camera, multiplexer, DVR, and so on.
Sharpness and brightness adjustment for each channel.
12VDC power adapter included.
10dB adjustable image gain.
Mc
ho e
CA-1536-1FQ
DC Jack to Triple DC Plug, 1 ft. Wires.
VM-101Q
Sn
n DC Con c o
CA-161T-02SQ
The ENFORCER CCTV Microphone is the ideal
way to add sound pickup to existing camera
installations. The microphone is used in DVRbased systems to record audio along with the video.
Omni-directional pickup pattern.
RCA jack for audio output.
12VDC Jack for power. Use a splitter (CA-1526-1FQ) to provide power to both camera and microphone.
DC Plug to Terminal Block, 2.5” Wire.
CA-151T-02SQ
DC Jack to Terminal Block, 2.5” Wire.
11
ENFORCER ®
a e Po er C nec o
SECO-LARM’s Illuminated Power Connectors
make troubleshooting CCTV or other 12VDC or
24VAC equipment easy. A quick glance at the
built-in multi-colored LED prevents damage to
the equipment by warning of incorrect voltage
or polarity. Available as either a plug or a jack,
the Illuminated Power Connectors are perfect for
nearly every installation, including CCTV, access
control, or any other low voltage (5~30 VAC/VDC)
device.
CA-1610-3FLQ*
Vo t g Co ver
DC Jack, 3 ft. wire with LED.
LED indicates power and polarity.
The ENFORCER Low-Voltage Battery Cut-Off
prevents the deep discharge of a backup battery.
The ST-BD01Q ties directly into most 12 or 24 VDC
power supplies or alarm panels for easy plug-andplay installation. A Master On/Off switch easily
connects or disconnects the battery and AC power
supply from the control panel.
Operating Voltages
CA-1615-06LQ*
Input Voltage
DC Jack to Plug, 6” wire, with LED.
LED indicates power and polarity.
t
Output Voltage
8~30 VDC/VAC
5VDC
15~30 VDC/VAC
12VDC
24~30 VDC/VAC
24VDC
wt
CA-161T-02SLQ*
Vo
e oos
ST-HB105-TTQ
CA-151T-02SLQ*
DC Jack to Terminal Block, 2.5” wire.
LED indicates power and polarity.
w
u p
ST-UV12-S3.0Q 3.0 Amp
ST-UV12-S4.0Q 4.0 Amp
LED power indicator.
ST-UV12-S3.0Q
Shown
Universal 100-240VAC input.
Regulated 12VDC output.
6 ft. cord 2.1mm plug (positive center).
Includes AC power cord (IEC320-C13).
Low power consumption.
12
Selectable input 12/24VDC.
Adjustable voltage cut-off and restore point.
Master On/Off switch.
Green AC LED power indicator.
Dual-color DC LED indicator.
Includes battery leads and double-sided tape.
5
1 at e Te e
ST-BT01Q
The ENFORCER
ST-BT01Q is more
than just a battery
tester. Additional
features make it
the perfect tester
for your tool box.
Tests:
1. Voltage
2. Battery Load
3. Voltage Drop 4. Polarity
5. PTC fuse
DC Plug to Terminal Block, 2.5” wire,.
LED indicates power and polarity.
top S c n
y Cutof
ST-BD01Q
ST-LA105-TTQ (0.5A)
ST-LA110-TTQ (1.0A)
Converts 12/24 VAC/VDC to a regulated 5/12/24 VDC output (adjustable).
Input voltage: 12/24 VDC/VAC.
Output voltage: 5/12/24 VDC (selectable & adjustable).
Small size for easy installation.
Input power LED indicator.
Multi-color LED indicates output voltage.
Terminal block connections for secured wiring.
CA-1510-3FLQ*
a
Low B
Patent
pending
DC Plug, 3 ft. wire with LED.
LED indicates power and polarity.
n C Co
2009 Vehicle Catalog
Compensates for DC voltage
drops over long cable runs.
Input voltage: 7-24 VDC
Output voltage: 12 or 24 VDC (adjustable).
Output current: 500mA @ 12/24 VDC.
Input power LED indicator.
Multi-color LED indicates output voltage.
Terminal block connection for secured wiring.
Operating Voltages
Input Voltage Output Voltage Adjustable
Voltage Range
7~12 VDC
12VDC
12.2~13.5 VDC
12~24 VDC
24VDC
23.0~25.2 VDC
*U.S.A. and international patents pending.
Voltage testing via 4 LEDs.
Selectable 500mA or 1A load.
u
t
AC Ad
ST-UV12-S0.5Q 0.5 Amp
ST-UV12-S1.0Q 1.0 Amp
ST-UV12-S2.0Q 2.0 Amp
ST-UV12-S1.0Q
Shown
Sideways plug for ease of
use on power strips.
Universal 100-240 VAC input.
Regulated 12VDC output.
6 ft. cord, 2.1mm plug (positive center).
Low power consumption.
www.seco-larm.com
A
o
s
S
SECO-LARM Audio Baluns are the fast, easy,
and low-cost way to connect sound sources
and destinations using low cost Cat5e/6 cable.
Two audio baluns are normally used, one on
each end of a pair in the Cat5e/6 cable. A
Cat5e/6 cable has 4 pairs of wire inside, so 4
channels of audio information can be carried
on a single Cat5e/6 cable. All SECO-LARM passive audio baluns transmit
the audio signal of a single audio channel long
distances over low-cost Cat5e/6 (or better)
unshielded twisted pair (UTP) cable.
A
gA
o
MAE-P115-01Q
A/
- An o
u o
MAE-P127-01Q
V
The ENFORCER MAE-P127-01Q Snap-In Analog
Audio balun is the fast, easy, and low-cost way to
connect sound sources and destinations using low-cost Cat5e/6 cable.
Low-cost & lightweight alternative to RCA cables.
Easily snaps in or out of wall plates or patch panels.
RCA to RJ-45 jack.
Gold-plated RCA connector.
Transmits analog audio up to 1,000 ft. (300m) via Cat5e/6 UTP.
Passive operation, requires no power.
p- D g t
ud o
MAE-P227-01Q
The ENFORCER MAE-P115-01Q Analog Audio
balun is the fast, easy, and low-cost way to
connect sound sources and destinations over lowcost Cat5e/6 cable.
Low-cost & lightweight alternative to RCA cables.
RCA to terminal block.
Gold-plated RCA connector.
Transmits analog audio up to 1,000 ft. (300m) via Cat5e/6 UTP.
Passive operation, requires no power.
A d o Ba n
MAE-P215-01Q
A/
-
The ENFORCER MAE-P215-01Q Digital Audio
balun is the fast, easy, and low-cost way to
connect sound sources and destinations using
low-cost Cat5e/6 cable.
Supports Dolby Digital, Dolby Pro Logic, dts, LOGIC7, and THX Surround EX.
Low-cost & lightweight alternative to RCA cables.
RCA to terminal block.
Gold-plated RCA connector.
Transmits digital audio up to 600 ft. (180m) via Cat5e/6 UTP.
Passive operation, requires no power.
e oA
un
MAE-P317-01Q
V
Eases installation of dual mono or single stereo audio over Cat5e/6 cable.
Dual RCA jacks (Red/Right, White/Left) on 6” pigtail to RJ-45 jack.
Transmits audio 1,000 ft. (300m) over Cat5e/6 UTP cable.
Gold plated connectors.
Passive operation, requires no power.
M
S ereo Aud o B u
MAE-P337-01Q
V
V
The ENFORCER MAE-P227-01Q Snap-In Digital
Audio balun is the fast, easy, and low-cost way to
connect sound sources and destinations using low-cost Cat5e/6 cable.
Supports Dolby Digital, Dolby Pro Logic, dts, LOGIC7, and THX Surround EX.
Low-cost & lightweight alternative to RCA cables.
Easily snaps in or out of wall plates or patch panels.
RCA to RJ-45 jack.
Gold-plated RCA connector.
Transmits digital audio up to 600 ft. (180m) via Cat5e/6 UTP.
Passive operation, requires no power.
P
o
Send audio over Cat5e/6 cable from mini-stereo plug.
Stereo mini plug on 6” pigtail to RJ-45 jack.
Transmits audio 1,000 ft. (300m) over Cat5e/6
UTP cable.
Gold plated connectors.
Passive operation, requires no power.
S Ov C
DE-S101Q
bn
All SECO-LARM UTP Baluns transmit a signal
(audio/video) long distances over low-cost
Cat5e/6 (or better) unshielded twisted pair
(UTP) cable.
A Cat5e/6 cable has 4 pairs of wire inside, so
4 channels of information can be carried on
a single Cat5e/6 Cable. Also audio, video,
power and data can all be handled via Cat5e/6
UTP cable.
Extend keyboard, mouse, camera - any USB devices over Cat5e/6.
USB 1.1 compliant.
Up to 150 ft. (46m) range.
Small size, only 21/2” x 17/16” x 7/8” (64 x 37 x 22 mm) excluding 9” (230mm) USB connection.
Passive operation, requires no power.
13
ENFORCER ®
2009 Vehicle Catalog
Wa -P e o pon
V deo
SECO-LARM Video Baluns are the fast, easy,
and low-cost way to connect video sources
and destinations using low cost Cat5e/6 cable. Two Video Baluns are normally used, one on
each end of a pair in the Cat5e/6 cable. A
Cat5e/6 cable has 4 pairs of wire inside, so 4
channels of video information can be carried
on a single Cat5e/6 Cable.
All SECO-LARM passive video baluns transmit
the video signal long distances over low-cost
Cat5e/6 (or better) unshielded twisted pair (UTP) cable.
C m osi e V deo B
n
MVE-PB010Q
A/
un
MVE-PCW15Q
- Wall-plate Component Video Balun w/IR pass-thru
/
p- Co p
Vi e
a n
MVE-PB020Q
Co p n t & Co p
n
MVE-PY016-Q
/
2 RJ-45 jacks.
Video and stereo audio transmission over one Cat5e/6 cable.
Two-way audio plus one video over one Cat5e/6 cable.
Passive operation, requires no power.
Vid o oo hon
A/
DP-121Q
-
Transfers composite video, YPbPr, or RGB signals.
Easily snaps in or out of wall plates, or patch panels.
Gold-plated RCA connector.
RJ-45 jack. Passive operation.
Max distance: Color - 2,230 ft. (680m), B/W - 2,550 ft. (780m).
Co po en V eo
ve V A B
EVT-SBP-GQ
Passive operation, requires no power.
Single gang plate.
RCA connectors to RJ-45 jack.
Video and digital audio transmission over one Cat5e/6 cable.
- Component & Composite Video + Digital and Analog Audio with IR pass-thru.
Transfers composite video, YPbPr, or RGB signals.
With screwless terminal block connection and passive operation.
Gold-plated RCA connector.
P
The Video Door Phone displays an image of
the visitor in real-time on the phone’s monitor,
and a built-in microphone and speaker on the
camera unit lets users communicate with visitors.
Authorized visitors can then be granted entry with
a push of a single button.
The fast, easy, and low-cost way to connect a PC,
digital video recorder, or video splitter to a VGA
monitor at distances of up to 450 feet (137m) away.
This allows the monitors to be easily installed on a
security professional’s desk while the video devices are locked securely in a separate room.
The connection is done via low-cost Cat 5e/6
shielded twisted-pair cable (or better) with shielded
RJ-45 connectors.
Transmits a VGA signal over Cat5e/6 cable.
Use with personal computer, DVR, etc.
with VGA output to CRT or LED monitors or VGA projectors.
450 ft. (137m) range.
Passive operation, requires no power.
Sold in pairs.
ve V A B
EVT-AB1-GQ l
MVE-PC015Q - Component Video Balun and
Digital Audio over Cat5e/6 (Passive) w/IR pass-thru.
V
4 RCA connectors to RJ-45 jack.
Supports HDTV (480i /480p/720p/1080i) signal up to 900 ft. (300m).
Passive operation, requires no power.
14
For home or business use.
Camera has 6 LEDs for nighttime operation.
Remotely and securely talk to visitors.
Remotely unlock doors, gates, etc. from the monitor.
Camera and monitor turn on and off with the push of a button.
Camera and monitor turn off automatically when not in use.
Adjustable contrast, brightness, and ringer volume.
Local monitor support on transmitter end.
Extends VGA range to 590 ft. (180m)
@ 640 x 480 resolution.
Works with video signals of up to 1920 x 1440 pixel resolution.
Uses Cat5e/6 (UTP or STP).
Sold in pairs.
Small size, only 43/16" x 215/16" x 7/8" (107 x 75 x 22 mm).
www.seco-larm.com
DM
M ti-Med
c e
MVS-H4101-0Q
oduct
HD
Co
MC-2201Q
A/
/
A/V
Multi-Media
Easily switch between any of four HDMI sources by remote control or push button.
Easily connects to different digital video sources
(DVD, A/V receiver, satellite, game console, etc.).
HDTV: resolution up to 1080p.
HDMI and HDCP pass-through.
Perfect for home theater systems.
24K gold-plated connectors.
Extends the range of HDMI compliant devices.
5VDC Power supply included.
IR remote control included.
HDM
e
SECO-LARM is using the “icon” above to
denote products in its new line of “Multi-Media”
products. These products can be used in a
variety of mobile or stationary applications. Please refer to the descriptions of the products
for additional application ideas.
A
e t
D I C nv
MVA-WH01Q
/
VGA input (plus stereo audio) to HDMI signal. Allows display from computer on HDMI monitor.
-
The ENFORCER MC-2201Q is used to join two
(2) HDMI cables together. It has gold-plated
contacts for reliability and longer life.
For joining 2 HDMI cables together.
Gold-plated contacts.
Compatible with all 19-pin HDMI cables, supports HDCP.
D
Co ec
MC-2101Q
/
er
MVR-HH01Q
A/
-
Input: VGA connector and Dual RCA jacks (Red/Right, White/Left).
Output: HDMI Jack.
HDCP Pass-through.
5VDC power adapter (included).
Extends high-definition video and digital audio
up to 115 ft. (35m).
Supports high-definition video up to 1080p.
Cab e
MC-1101-09FQ
A/
C
Vd
git
o to HD
MVA-EH01Q
-
Black
Chrome
cable
9 ft. (3m) length.
Supports HDMI v1.3.
HDMI Type-A to Type-A.
28AWG OFD:7.5.
Gold-plated connector.
90° angle cable versions also available.
/
Component video + digital audio to HDMI converter
Component video input (and digital audio) to HDMI
signal output. Display any component video source
on an HDMI monitor.
The ENFORCER MC-2101Q is used to change
the insertion angle for HDMI cables. The
adjustable angle allows for tight mounting against
a wall or other reduced space applications. It has
gold-plated contacts for reliability and longer life.
For tight mounts behind a monitor.
Gold-plated contacts.
Compatible with all 19-pin HDMI cables, supports HDCP.
O c
be
MC-5501-09FQ
Input: 4 RCA connectors (3 for component video, and 1 for digital audio).
Output: HDMI jack.
Supports HDTV resolution up to 1080p.
5VDC power adapter (included).
9 ft. (3m) single-mode optical patch cable.
2 x Toslink connectors. 15
ENFORCER ®
2009 Vehicle Catalog
HDMI over Cat5e/6
MVE-AH010Q
/V
Connect HDMI equipment using low-cost Cat5e/6 UTP cables.
Works with full-motion video and audio signal up to 195 ft. (60m).
HDMI over Cat5e/6 without any signal loss.
Supports 480i/480p/576i/576p/
720p/1080i/1080p.
Built-in equalization and signal boost function.
Auto adjusts the equalization and amplification to eliminate feedback.
Signaling rates up to 2.25Gbits.
Compact size.
5VDC power supply included.
Supports DDC, EDID, and hot-plug detection.
HDMI 1.3 and HDCP 1.1 compliant.
Copyright © 2009 SECO-LARM U.S.A., Inc. All rights reserved.
SECO-LARM’s Security Systems and Accessories are protected by the following patents:
U.S. pat. nos. 6109110, 5760680, 5751072, 5739749, 5648754, 5483225, 5473305, 5298879, 5216407,
5084697, 4980666, 4975678, 4926160, 4835518, 4810998, 4761631, 4706064, 4700332, 4679033,
4550229, 4546629, 4543568, 4507945, D350494, D319196, D314791, D479708, D485774
Taiwan pat. nos. 158210, 133076, 1 18811, 116977, 105843, 100701, 94510, 84396, 76872, 75669,
66042, 61565, 59176, 56767, 52421, 50612, 46459, 43239, 40938, 40244, 39225, 37977, 37422,
35025, 33687, 33261, 33201, 32844, 32435, 32409, 31633, 30905, 30897,30432, 30060, 28883,
28112, 26690, 24477, 23474, 22073, 211 11, 20786, 20380, 19593, 18971, 17724, 16672, 16021,
15469, 14658, 12398, 11699, 9191, 3724, 86123
U.K. pat. nos. 2279792, 2271009, 2215895, 2179482, 2177797, 2177529, 2141480, 2036522, 1041888
German pat. nos. 29600370.0, G9203004.1, G9203003.3, G9212809 2
Hungary pat. no. 85927 Sweden pat. no. 9202706 9
Japan pat. no. 1882619 Korea pat. nos. 35097, 32332
China pat. nos. ZL97312768.6, ZL96249150.0, ZL95201587.0, ZL94300564.7, ZL02305808.0
Other international patents are pending.
16842 Millikan Avenue
Irvine, CA 92606
(Domestic U.S. & Canada) (800) 662-0800
(California & International) (949) 261-2999
Fax (949) 261-7326
Email: [email protected]
Web Site: www.seco-larm.com
Quality You Can Count On!
Anyone can talk about quality. But can they make sure the products you source offer consistent quality, order after order?
SECO-LARM’s quality control management system is compliant with all the requirements of ISO 9001, the accepted measure of quality worldwide.
ISO 9001 is not another quality control theory. Instead, SECO-LARM’s entire manufacturing process was probed
in great detail by an independent quality system certification body, and was found compliant with internationally
accepted quality standards.
A quality management system certified as ISO 9001 compliant ensures that SECO-LARM can deliver products that
meet your quality requirements time and time again. ISO 9001. World-class quality management from a world-class
security manufacturer.
The SECO-LARM policy is one of continual development and improvement.
For that reason, SECO-LARM reserves the right to change specifications without notice.
SECO-LARM is not responsible for misprints.
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement