Cozzia | CZ-810 | Instruction manual | Cozzia CZ-810 Instruction manual

INSTRUCTION MANUAL CZ-810
Thank you for purchasing the CZ-810 Massage chair.
Before using your massage chair, please read the content of this instruction
manual and refer to it when needed.
Table of Contents
Luxury Features ………………………........................…… 2
Safety Precautions ………………………......................…. 3-7
Chair Components ……………………….....................….. 8-9
Chair Installation & Moving ………………....................… 10-14
Chair Remote Controller …………………...................….. 15-16
Operation Guide …………………………....................….. 17-22
Grounding Instructions …………………......................….. 23
Chair Specifications …………....................………………. 24
Troubleshooting ………………………......................…….. 25
Product Care and Storage …………...................………… 26
Warranty Information ……………….......................………. 27-29
Warranty Card (Attachment)
1
01
Luxury Features
● The operation of massage chair is controlled by a microcomputer that performs various
intelligent massage methods and combinations, like Kneading, Tapping, Clapping,
Shiatsu, Rolling, Vibration and Air Massage. All these methods massage acupressure
points accurately to effectively alleviate fatigue, promote metabolism and improve blood
circulation.
● The chair is equipped with five sets of full body automatic programs and three sets of
localized automatic programs to thoroughly fulfill your various needs.
● Various types of massage functions can be combined for customized massaging
programs, in addition to the precise point massage.
● The combination of air pressure for the seat pad and leg as well as the calf and vibration
functions can be set automatically for more effective massage.
● Spring-styled massage that is specially structured for the back is designed according to
curve of the human body to provide a more effective massage.
● The massage rollers use an interlocking gear to provide in-depth massage to the
acupressure points on the back.
● Designed with double automatic adjustment, the chair’s backrest can be adjusted from
115° to 160°, while the footrest, from 0° to 90° to suit you.
● The timer function can be adjusted according to your desired duration of the massage
program.
● Liquid crystal display and glow-in-the-dark display for a user friendly operation even in
the dark.
● Designed with power surge and pressure detector as well as automatic temperature
sensor and auto shutdown mechanism for safety.
● The operation is controlled by intelligent microprocessor for excellent performance and
consistent quality
2
02
Safety Precautions
IMPORTANT SAFETY INSTRUCTIONS
When using the massage chair, basic precautions should always be followed,
including the following:
Read all instructions before using this massage chair.
DANGER-To reduce the risk of electric shock:
● Always unplug this massage chair from the electrical outlet immediately after
using and before cleaning.
● Never use pins or other metallic fasteners with this appliance.
● Carefully examine the covering before each use. Call for service if the covering
shows any sign of deterioration, such as blistering, peeling or cracking.
● Keep dry-Do not operate in a wet or moist condition.
WARNING- To reduce the risk of burns, fire, electric shock or injury to persons:
● Read all instructions before using.
● A massage chair should never be left unattended when plugged in. Unplug from
the outlet when it is not in use and before putting on or taking off parts.
● Close supervision is necessary when this massage chair is used by or near
children or disabled persons. Keep children away from reclining backrest and
extended leg rest.
● Use this massager chair only for its intent use as described in this manual.
● Never operate this massage if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Contact
Customer Department.
● Keep the cord away from heated surfaces.
● Never operate the massage chair with the air openings blocked. Keep the air
openings free of lint, hair, and the like.
● Never drop or insert any object into any opening.
● Do not use outdoors.
● Do not operate where aerosol (spray) products are being used or where oxygen
is being administered.
3
● To disconnect, turn all controls to the off position, then remove the plug from the
outlet.
● Do not stand on or in the massage chair. Use only while seated.
● The product is not intended for use by children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the product by a
person responsible for their safety.
Safety
● Children should be supervised to ensure that they do not play with the product.
● Temperatures sufficiently high to cause burns may occur regardless of the control
setting. Do not use on an infant or invalid or on a sleeping or unconscious person.
Check the skin in contact with the heated area of the appliance frequently to reduce
the risk of blistering.
● Burns may result from improper use
● Do not crush-avoid sharp folds.
● Keep children away from extended foot support (or other similar parts).
● DO NOT WET-DO NOT USE PINS.
● NEVER REMOVE COVER.
● Connect this appliance to a properly grounded outlet only. See Grounding
Instructions.
SAVE THESE INSTRUCTIONS
This massage chair is intended for household use only.
1. Usage Environment
● Do not use the massage chair in an excessively humid or dusty environment as
this may result in malfunction or electric shock.
● Do not use the massage chair in a room with a temperature of 104°F or higher.
● Do not expose the massage chair to heaters, stoves or direct sunlight.
● Place and use the massage chair on an even, non-slip floor.
● The massage chair is designed for home use and not for commercial purposes.
4
Caution
● This massage chair is to be used indoors only.
● If you use the massage chair in a cold room, do not increase the room
temperature abruptly. It is recommended that you increase the temperature
gradually to a normal level.
● If the massage chair is stored in a cold place and is being brought into a
warm environment, it is advisable to wait one hour before use. This is
because its performance may not be at optimum level, as there may be water
droplets on the mechanical parts due to condensation. Using the massage
chair under such conditions may result in malfunction.
2. Safety Precautions
● To ensure safe and correct use of the massage chair, do not operate it without
reading this operation manual carefully.
● Do not use the massage chair when the upholstery or seat is removed. This may
cause injury or malfunction.
● Do not use the massage in combination with other therapeutic equipment or
electric blanket, etc, as this may result in ineffectiveness or injury.
● Do not use the massage chair an hour before or after eating as this may have
adverse effects on the user.
● Do not allow children or pets to play around the massage chair, e.g. behind the
backrest, under the seat or leg rest of the massage chair. This may result in injury.
● Do not use the massage chair when your body is wet.
● Do not operate the massage chair with wet hands.
● It is not recommended to use the massage for more than 15 minutes.
● Do not perform continuous massage on the same sport of your body for more than
5 minutes at a time as this may result in excessive stimulation and may have adverse
effects.
● Do not insert your hand or foot along the paths of the massage rollers during use
as this may cause injury.
● Stop operation immediately if you experience any discomfort.
● This product is not intended for self-treatment of conditions that should be
managed by a qualified health care provider.
● People on medication or with medical conditions, please consult your doctor before
use. Please do not use the product if you are not felling well.
5
3. People with Medical Conditions
Consult your doctor before use if you:
● are under medical rest as ordered by a doctor.
● have spinal disorders, an abnormal spinal condition or have suffered a spinal
injury.
● have back problems.
● have diabetes, osteoporosis or sensory impairment.
● have joint dysfunction such as rheumatism, hammertoe or gout.
● have a pacemaker or other electronic medical devices.
● may be pregnant.
● have phlebitis or thrombosis.
● have an increased risk for blood clots.
● had recent surgery.
● have surgical pins, screws, or anything mechanical in the legs, ankles or feet.
Caution
● This massage chair is not intended for use by children or persons with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction or
instruction concerning use of the massage chair by a person responsible for
their safety.
● Children should be supervised to ensure that they do not play with the
massage chair.
● Avoid using the massage chair under the influence of alcohol.
● Do not apply massage rollers directly on the head, elbow or knee joints,
torso or abdomen.
● If your legs or feet slip off the leg rest during massage, do not force them
back in as this may result in injury.
● Remove the power plug from the electrical outlet immediately should
liquid be accidentally spilled onto the massage chair. Do not use wet hands
to connect or disconnect the power plug from the electrical outlet.
● Do not tamper with the power cord or use the massage with a damaged
cord as this may result in malfunction and electric shock.
6
4. Instances When the Massage Chair Should Not Be Used
In the following events, please switch off the main power switch immediately and
disconnect the power cord from the electrical outlet:
● If water is accidentally spilled onto the massage chair. This may result in electric
shock or malfunction.
● If the fabric of the backrest is torn and the internal components are exposed.
● If pain or discomfort is felt during massage, stop operation immediately and
consult your doctor.
● If you detect any malfunction or any other abnormal condition during operation.
● If there is a power failure. Injury may occur when power is restored unexpectedly.
● If there is lightning.
5. Assembly and Repair of the Massage Chair
● Do not disassemble the backrest cover of the massage chair. Touching the
internal components may result in malfunction or electrical shock.
● This massage chair must only be professionally serviced or repaired. Do not
attempt to disassemble or repair the massage chair yourself.
6. Things to Note About the Power Plug and Cord
● Check that the Alternating Current (AC) voltage corresponds with the
specifications indicated for the massage chair.
● Do not connect or disconnect the power plug from the electrical outlet with wet
hands. This may result in malfunction or electric shock..
● When disconnecting the power plug, pull it by holding the plug, not the cord.
● Although operation will be stopped automatically by the Auto-Timer function,
always remember to switch off the main power switch after use.
● Do not place the power cord under the massage chair or any other heavy objects.
● Do not wind the power cord around the massage chair as this may damage the
cord and result in a fire or electric shock.
● Do not operate the massage with a damaged cord or extension cord.
● Do not use the massage if the electrical outlet is loose.
● If the power cord is damaged, it should be replaced by a qualified technician.
7
03
Chair Components
Pillow Pad
Shoulder Air Bags
Controller
Backrest
Backrest
Pad
Armrest Air Bags
Armrest
Seat Pad
Side Panel
Calvesrest
Wheet
Legrest
Footrest
8
Massaging Position
9
04
Chair Installation & Moving
1. When positioning the chair, please leave 80cm of space
behind the backrest to allow free reclining of the backrest.
2. Unplug from outlet when installing the chair parts.
Step 1: Take out below objects from 2 cartons.
A: Chair Backrest and Seatrest part
B: Chair Side panels
Step 2: Insert and connect the backrest to the bottom seat, and fasten the backrest into
the allocated slot.
Note: Be careful of scratching during installation.
a
b
a: Backrest shafts
b:Allocated Slots
10
Step 3: Attach the connecting rod and the u stay fork of the reclining actuator with the flat
head rivet, and secure with a split pin as demonstrated in PIC I and PIC 2.
A: Connecting Rod ( On the backrest )
B: U stay fork of reclining actuator ( on the seat )
C: Flat head rivet
D: Split pin
A
A
D
C
C
B
B
PIC 1
PIC 2
Step 4: Connect the plugs to the corresponding
place in the seat according to the marks given.
Note: Insert black to black and gray to gray,
otherwise damage to the chair may result.
gray
black
Step 5: Connect the Air pipes
While at Zero-gravity position, backrest of chair comes out 4 Airpipes (2 air pipes for each
side), well-connect pipes with corresponding colors.Unplug power cord.
Diagram for Air pipes of Backrest
Red Yellow
Grey
Grey
SEATREST
BACKREST
RIGHT
LEFT
Red Yellow
Green
11
Red Yellow
Red Yellow
Green
RIGHT
LEFT
Step 6: Shoulder part Installation
1) Lock M6-screw onto Backrest by Round Spaner
2) Plug up screw hole with special plug head
after well-connect shoulder part.
Step 7: Side Panel Installation
1) Fix the side panels to the frame by the two
“Z” hook.
2) Well connect the air pipes of armrest.
3) Fix the side panel by 4 socker cap screws,
ensure the side covers can not move.
4) Fix the side connector and rotation part of backrest.
5) Install the controller holder. ( using screws )
Note: Please ensure all airpipes are not tight pressured.
Tight connect the armrests and shoulder
parts with Rotator
Rotator
12
Step 8: Connet the cover to the backrest with zipper.
Step 9: Clip joint the pillow to the backrest cover.
step 8
step 9
Step 10: Connect the wire plug.
The back massage strength-control pad has been
inserted into the backseat cover.
If strong massage is desired, remove the back
massage strength-control pad from the cover; this
strengthens the massage. If mildermassage are
desired, insert the back massage strength-control
pad into the cover; this lessens the strength of the
massage.
13
Chair Moving
1. Lift up the Calves Rest.
2. Then recline the chair to approximately to 45 degrees, so that you can easily move the
chair around the house with a slight pull push.
Note:
a. Before you move the chair, please put the footrest back into the original position first.
Otherwise, injuries might occur in the process of moving.
b. Avoid moving the massage chair when there is someone seated on it.
c. Placing a mat underneath the massage chair is advisable, as the moving process
might leave scratches on the floor surface.
14
05
Chair Remote Controller
13
14
15
16
17
19
20
21
18
41 34
11
30
36
1
28
37
26
38
12
39
10
9
2
4
3
5 6
7
22
23
24
25
40
15
32 33 31
35
29
27
8
16
06
Operation Guide
Connect to the power supply, and turn the switch to “I” position. The chair is now in idle
mode. During idle mode, there are only seven funtions: ON/OFF, Foot Extend, Pause,
Recline, Sit Up, Lift Leg or Recline Leg that can be operated.
CONTROL BUTTONS FOR THE MASSAGE CHAIR
1. ON/OFF
The Start/Stop Control Button
- Press once on this button and the backlight of the Remote Control will start blinking: the
chair is in idle mode. Press any massage function button to begin massage functions on
the chair. This will also start the Timer.
- Press this button again to stop all massage functions, the massage rollers will return to
its original position.
2/3. Recline/Sit Up
Angle Adjustment Control Button for Massage Chair
- These two control buttons can adjust the Reclining and Sit Up angle respectively. Press
once on the Reclining or Sit Up control button to adjust the Backrest and Footrest to a
comfortable position. - Press any of the control button again to adjust for Reclining, Sit Up,
Lift Leg or Recline Leg, to confirm the position.
4/5. Lift Leg/Recline Leg
Angle Adjustment Control Button for Calves
- These two control buttons can adjust massage angle on the Legrest.
- Press once on the Lift Leg or Recline Leg control button, and the Legrest will adjust itself
to a comfortable position. Press any of the control buttons again for Reclining, Sit Up, Lift
Leg or Recline Leg to confirm the position.
Note: The adjustment angle functions will be activated by sustained pressing of the button
for 2 seconds.
17
6/7. Length Adjustment Control Button for Legrest
- These two control buttons can adjust the length on the legrest.
- Press the button once to adjust the legrest to a comfortable length. Press the button
again to confirm the length.
8. Length Auto Adjustment Control Button
- It’s equipped with an Auto Function that length of footrest can be adjusted according to
the user’s leg length for a more effective massage. Every time the button is pressed, the
auto function will detect the best massage length.
9. Backrest Scanning
Auto Scan Control Button
This chair is equipped with a Scan function that the massage position can be adjusted
according to the user’s height for a more effective massage. Every time this button is
pressed, the chair will start to scan the user’s back and legs and to detect the best
massage position for user.
10. The Pause Button
- When the chair is in massage mode and the user wants to temporarily pause it, press the
Pause button and all massage functions will stop. The “Pause” icon will be blinking on the
Liquid Crystal Display and the set time countdown will be paused as well. The chair is now
in idle mode. - Only the “Pause, Sit Up, Lift Leg, Recline Leg” can be used. Press the
Pause button again to immediately cease the “Pause” function and resume the original
massage function. The countdown continues.
11. Timer
The Timer’s Time Interval
- After the masage process is activated, the chair will be automatically set on a 15-minute
Timer. Subsequently, every time the “TIMER” button is pressed, the Timer’s interval will be
changed in the sequence of “20>25>30>5>10>15” minutes.
- When there is only 1 minute remaining in the set time, the Backlight of the Remote
Control will light up automatically, followed by 5 beeps to alert the user.
12. Zero-G
- Press this button to active the Zero-G function. Press the button again to stop the Zero-G
massage function.
18
A. Full Body Auto Programme
- If one of the five Auto Programmes is activated before the Auto Scan of the entire body,
the machine will automatically do a height scan for the back. At the same time the user
can manually adjust the massage height to the prefered level. The following are the Auto
Programmes available:
13. Healthcare
14. Relax
15. Therapy
16. Smart
17. Circulation
18. Demo
The Backrest and Footrest will resume original position when this Auto Programme is
about to end.
B. Localised Auto Programme
This programme gives precise massage at the exact part of the body for better
localized-massage effect.
19. Neck/Shoulder
Neck/Shoulder Auto Programme Start/Stop Control Button.
20. Back/Lumbar
Back/Lumbar Auto Programme Start/Stop Control Button.
21. FULL Air
Full Air Auto Programme Start/Stop Control Button.
C. Manual Programme
22. Swedish
Swedish function Start/Stop Control Button- 5 levels of speed to be adjusted.
- Press this button once and it will activate the Swedish function for full back massage.
- Press again to stop the function.
19
23. Clapping
Clapping function Start/Stop Control Button- 3 sizes of width, 5 levels of speed to be
adjusted.
- Press this button once to active the clapping function for a full back massage at medium
speed.
- Press the button again to stop the clapping massage function.
24. Shiatsu
Shiatsu function Start/Stop Control Button- 3 sizes of width, 5 levels of speed to be adjusted.
- Press this button once to active the shiatse function for a full back massage at medium.
- Press this button once to active the shiatse function for a full back massage at medium.
25. Rolling
Rolling function Start/Stop Control Button- 3 sizes of width.
- Press this button once and it will activate the Rolling function for full back massage.
- Press again to stop the function.
This function cannot be used to perform “Spot” massage.
26. Kneading
Kneading function Start/Stop Control Button- 5 strength levels to be adjusted.
- Press once on “Kneading” to activate full back-massage of Kneading mode.
- Press again to stop the Kneading function.
This function can be combined with Tapping/Clapping/Shiatsu to enjoy Kneading
+Tapping, Kneading + Clapping, Kneading + Shiatsu multi massage functions.
27. Tapping
Tapping funtion Start/Stop Control Button- 3 sizes of width, 5 levels of speed to be adjusted.
- Press this button once to active the tapping function for a full back massage at medium
speed.
- Press the button again to stop the tapping massage function.
28. Speed
The Speed Adjustment button for Tapping, Clapping, Swedish and Shiatsu mode.
After activating the Tapping, Clapping, Swedish or Shiatsu function, every time the button
is pressed, the strength can be adjusted in the cycle
29. Width
The Width Adjustment button for Tapping, Clapping, Shiatsu, Rolling mode.
After activating the Tapping, Clapping, Shiatsu or Rolling function, every time the button is
pressed, the width can be adjusted in the cycle.
20
30. Strength
The Adjustment Button for Kneading Speed
After activating the Kneading function, every time the button is pressed, the speed can be
adjusted in the cycle.
D. The spot or partial back massage
31. Spot
The Spot or Localised Back massage.
This button allows user to select Spot massage for any part on the back.
- Press this button once to activate spot massage while the original massage mode
continues to run at the original position.
- Press again to cease Spot massage function and resume full back massage function.
32. Partial
The Partial Back Massage
This button allows user to select Partial Massage for any part of the back. The position for
Partial Massage can be adjusted for a user friendly method of Localised Massage.
- Press this button once to continue the original massage mode, while activating Partial
Massage, which takes the original position as the centre to perform Partial Massage with
the width of approx. 8cm.
- Press again to stop Partial Massage function and resume full back massage function.
33. Upward & Downward
Position Adjustment Button for Spot or Partial Massage.
These keys are used for adjusting backrest massage position to achieve spot massage.
- Press Upward & Downward key continuously until the massage wheel rolls to ideal
position and then undo the key to get the spot massage function.
- Press Rolling key to eliminate spot function.
34. Setting Seat Vibration
- Press the Vibration button once to activate the Vibration.
- Press this button again and it will stop the Vibration function.
35. Heating
Press the heating button once to activate the Heating function.
21
E. Air-pressure for whole body
36. Neck Air Massage
Neck Air Squeeze function Start/Stop Button- 5 levels of intensity to be adjusted.
- Press once to activate pre-programmed Air-pressure Massage Mode to enjoy rhythmic
air-pressure massage.
- Press again to stop the function.
37. Shoulder Air Massage
Shoulder Air Squeeze function Start/Stop Button- 5 levels of intensity to be adjusted.
- Press once to activate pre-programmed Air-pressure Massage Mode to enjoy rhythmic
air-pressure massage.
- Press again to stop the function.
38. Calves Air Massage
Calves Air Squeeze function Start/Stop Button- 5 levels of intensity to be adjusted.
- Press once to activate pre-programmed Air-pressure Massage Mode to enjoy rhythmic
air-pressure massage.
- Press again to stop the function.
39. Seat Air Massage
Seat Air Squeeze function Start/Stop Button- 5 levels of intensity to be adjusted.
- Press once to activate pre-programmed Air-pressure Massage Mode to enjoy rhythmic
air-pressure massage.
- Press again to stop the function.
40. Arm Air Massage
Arm Air Squeeze function Start/Stop Button- 5 levels of intensity to be adjusted.
- Press once to activate pre-programmed Air-pressure Massage Mode to enjoy rhythmic
air-pressure massage.
- Press again to stop the function.
41. Air Intensity
The Intensity Adjustment Button for Air-pressure, Auto or Manual- 5 levels of intensity to
be chosen.
After activating the Air-pressure function, press this button to adjust the intensigy in the cycle.
Finish Operating
Please press the “ON/OFF” button after use, the chair will stop operation. Massage Rollers
will resume to its original position; then switch the power supply button under the chair to
“O” and unplug the machine from the socket.
22
07
Grounding Instructions
This product must be grounded. If it should malfunction or break down, grounding
provides a path of least resistance for the electric current to reduce the risk of
electric shock. This product is equipped with a cord with an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
Danger-Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or service technician if you
provided with the product-if it will not fit the outlet, have a proper outlet installed by
a qualified electrician.
This product is for use on a nominal 120V circuit and has grounding plug that looks
like that plug illustrated below. Make sure that the product is connected to an outlet
having the same configuration as the plug. No adapter should be used with this
product.
Grounded Outlet
Grounded Outlet Box
Grounding Pin
23
08
Chair Specification
Description
Specification
Model No.
CZ-810
Rated Voltage
110 - 120 ~
Rated Frequency
50/60 Hz
Rated Power Consumption
250W Max
Timer
5/10/15/20/25/30 minutes
Max time rate
60 minutes
Dimension(L x W x H)
Weight
Length of The Wire
Usage Condition
Storage Condition
Safety Feature
Packing size(Seat part): 52.4”x30.3”x37.2”
Packing size(Backrest part): 35.4”x35.4”x14.2”
Net Weight: 260lbs
Gross Weight: 322lbs
Controller wire: 1.3 m
Power supply wire: 2.2 m
Temperature: 10°C ~ 40°C
Humidity: 30 ~ 85 RH
Temperature: 20°C ~ 60°C
Humidity: 30 ~ 85 RH
With protection against overheat, voltage and
current overload
24
09
Troubleshooting
This massage chair is controlled by a microcomputer and is susceptible to power surges
of +10 to –15%.
The following situations may display in the event of a power surge:
Situation
Solution
The massage chair is connected
to the power supply but is not
functioning.
1. Check to see that the plug is well connected
and working.
2. Make sure that the massage chair switch is
turned to the “I” position.
The remote control works, but the
massage chair is not functioning.
The massage chair may have overheated due
to prolonged use.
Turn off the power and allow the chair to cool
for 30-50 minutes.
Both the remote control and the
massage chair are not functioning.
1. Make sure the chair is plugged into a
working outlet.
2. Turn the power OFF and then ON again.
If you continue to have problems, please read te warranty card and contact the COZZIA
service department.
25
10
Product Care and Storage
1. Storing the Massage Chair
● Wipe off dust and dirty from the massage chair with a dry, soft, clean cloth after use.
● Keep the massage chair clean and away from places of high humidity.
● If the massage is not to be used for a long period of time, cover the massage chair
with a dust cover and unplug its power plug from the electrical outlet.
Caution
● Do not store the massage chair in direct sunlight or in places of high
temperature. This may cause the color of the upholstery to fade.
● Do not allow the massage chair to remain in contact with vinyl or wallpaper
for extended periods of time as this could lead to discoloration.
2. Cleaning the Massage Chair
● Before cleaning, ensure that the main power switch is off and the power plug is
disconnected from the electrical outlet.
● Wipe off dust and dirt from the massage with a dry, soft, clean cloth after each use.
● This product can be cleaned thoroughly with a slightly damp cloth.
● Do not iron the upholstery.
● Do not wash the upholstery using a home washing machine as this may result in
deterioration of the upholstery’s quality.
Caution
● Do not use abrasive cleaning agents like benzene or thinner to clean the
massage chair. This may cause the upholstery to fade.
3. Cleaning the Controller
● Use only a clean, dry cloth to clean the controller
Caution
● Do not use a wet cloth to clean the controller. This may result in malfunction.
26
11
COZZIA Consumer Warranty
COZZIA products have the following warranty: COZZIA’s massage chairs,
motion upholstery and home theater massage seating provide a one year in-home
service warranty and a two-year parts warranty. COZZIA customer service will not
issue Return Material Authorizations (RMAs) for products. COZZIA products will be
either repaired by the consumer or by an in-home technician. COZZIA will not issue
Return Material Authorizations (RMAs) for buyer’s remorse.
SERVICE AND TECHNICAL SUPPORT
Consumers may contact COZZIA’s customer service department at 1-877-977-0656
between 9:00 am and 5:00 pm PST, Monday through Friday for warranty or service
issues.
Consumers are required to provide the unit serial number and dated proof of
purchase (sales receipt) when they contact the COZZIA service department
regarding a repair.
A COZZIA customer service representative will attend to most consumer inquiries, but
in some cases a technical service specialist will provide advanced support.
Non-warranty repair is provided on a "per incident" basis. COZZIA customer service
will verify that the unit has failed and provide instructions for repairing a unit. All
applicable repairs, parts, shipping, handling, local tax and a "per incident" fee will be
charged for non-warranty repairs and support calls.
Proof of purchase (original receipt) is required for all warranty repairs or service.
PRODUCT REPAIRS
Many COZZIA product repairs may be performed by the consumer in their own
home with parts and instructions supplied by COZZIA such as remote controller
replacements that don’t require a technician.
27
Canadian consumers may contact COZZIA's customer service department at
1-877-977-0656 between 9:00 am and 5:00 pm PST, Monday through Friday for
warranty or service issues.
● Floor Models and Demonstration Units have a prorated warranty period
that begins the day the model is placed on the floor and connected to an
electrical outlet by the retail partner. Proof of purchase is required in order
to obtain warranty service and parts. Non-warranty parts and service are
available at a “per incident” charge.
● Warranty Coverage Period - Warranty coverage starts at the time that the
consumer PURCHASES their chair. Proof of purchase is required for all
warranty repairs. The warranty time period is measured by continuous
calendar days based on a seven-day week.
● Field Service – COZZIA customer service department will diagnose and
schedule an authorized service provider to repair the chair in the
consumer's residence.
● Parts - All parts deemed necessary for repairs will be shipped to the
consumer at no charge by the COZZIA service department.
CONSUMER WARRANTY LIMITATIONS AND EXCLUSIONS
● Warranties are only valid in the 48 contiguous United States and Canada
and are contingent upon the consumer operating the chair according to the
corresponding instruction manual.
● The warranty only applies to COZZIA products and does not include any
accessories or enhancements.
● Field service requires pre-approval and must be performed by COZZIA’s
authorized field service personnel. Field service is only available in the
United States and in major metropolitan areas in Canada.
● Softening of foams and filling composites in pillows, pads, and memory
foam occurs naturally and does not constitute a defect under this warranty.
28
● Fading, wear and piling of fabrics occurs naturally and does not constitute
a defect under this warranty.
● Natural markings, grain and dye variations in leather do not constitute a
defect under this warranty.
● Warranties do not cover any loss or damage resulting from improper
installation, unauthorized repairs or modifications, improper use of
electrical/power supply, loss of power, dropped product, a malfunction or
damage of an operating part from failure to provide manufacturer's
recommended maintenance, transportation damage, theft, abuse, misuse,
neglect, vandalism or environmental conditions (fire, floods, rust, corrosion,
sand, dirt, windstorm, hail, earthquake or exposure to weather conditions),
loss of use during the period the product is at a repair facility, or otherwise
awaiting parts or repair.
● Damage due to shipping and handling does not constitute a defect under
this warranty.
● Under no circumstance shall COZZIA or its representatives be liable for
indirect, consequential, or incidental damages (including damages for lost
profits, business interruption, bodily injury, medical and the like), even if
any party has been advised of the possibility of such damages.
● Warranties are non-transferable and shall be in lieu of any other warranty,
express or implied, including but not limited to any implied warranty or
merchantability or fitness for particular use.
● COZZIA’s sole liability and the purchaser's exclusive remedy shall be for
the repair, or at COZZIA’s option, for the replacement of the defective part.
Not withstanding the above, if replacements parts for defective materials
are not available, COZZIA reserves the right to make substitutions in lieu
of repair or replacement.
● All warranties begin on the DATE OF PURCHASE; no allowance or
extension is offered for delivery and/or installation.
● Warranties do not apply to rental, business, commercial, institutional or
other non-residential users.
29
Warranty Card
WARRANTY REGISTRATION FORM
Product Serial No. (located on product):
Purchase Price:
Model No:
Date Purchased:
First Name:
Last Name:
Address:
City:
State:
Zip:
Phone:
Email:
Please mail to: Cozzia USA LLC
1102 John Reed Court
City of Industry, CA, 91745
Tel: 1-877-977-0656
Fax: 1-800-521-4712
Download PDF