Features
• Vitreous china
• Under-mount
• With or without overflow
• Available with KOHLER Artist Editions designs
• Includes 1193643 clamp assembly, unless specified
• 15″ (381 mm) x 12″ (305 mm)
• 17″ (432 mm) x 14″ (356 mm)
• 19″ (483 mm) x 15″ (381 mm)
CAXTON
®
UNDER-MOUNT BATHROOM SINK
K-2210
ALSO K-2211, K-2209
ADA CSA B651 OBC
Codes/Standards Applicable
Specified model meets or exceeds the following:
• ADA
• ICC/ANSI A117.1
• CSA B651
• OBC
• ASME A112.19.2/CSA B45.1
Colors/Finishes
• 0: White
• Other: Refer to Price Book for additional colors/finishes
Accessories
• CP: Polished Chrome
• Other: Refer to Price Book for additional colors/finishes
Specified Model
Model
K-2209
K-2210
K-2210-G
K-2210-L
K-2210-N
K-2211
K-2211-G
K-2211-L
Description Colors/Finishes
Bathroom sink, 15 ″ (381 mm) x 12″ (305 mm), w/overflow, w/clamps
Bathroom sink, 17 ″ (432 mm) x 14″ (356 mm), w/overflow, w/clamps
Bathroom sink, 17 ″ (432 mm) x 14″ (356 mm), w/glazed underside, w/o overflow, w/clamps
❑ 0
❑ 0
❑ 0
Bathroom sink, 17
″ (432 mm) x 14″ (356 mm), w/overflow, w/o clamps ❑ 0
Bathroom sink, 17
″ (432 mm) x 14″ (356 mm), w/o overflow, w/clamps ❑ 0
Bathroom sink, 19
″ (483 mm) x 15″ (381 mm), w/overflow, w/clamps
Bathroom sink, 19 ″ (483 mm) x 15″ (381 mm), w/glazed underside, w/o overflow, w/clamps
❑ 0
❑ 0
Bathroom sink, 19 ″ (483 mm) x 15″ (381 mm), w/overflow, w/o clamps ❑ 0
❑ Other_____
❑ Other_____
❑ Other_____
❑ Other_____
❑ Other_____
❑ Other_____
❑ Other_____
❑ Other_____
Product Specification:
The under-mount bathroom sink shall be made of vitreous china. Bathroom sink shall be available with or without overflow.
Bathroom sink shall be 15 ″ (381 mm) in length and 12″ (305 mm) in width, 17″ (432 mm) in length and 14″ (356 mm) in width, or 19 ″ (483 mm) in length and 15″ (381 mm) in width. Bathroom sink shall include 1193643 clamp assembly for all models except K-2210-L and K-2211-L. Bathroom sink shall be available with KOHLER Artist Editions designs. Bathroom sink shall be
Kohler Model K-_____-____ or K-_____-_____-_____.
Page 1 of 2
105048-4DK
USA/Canada: 1-800-4KOHLER
(1-800-456-4537) www.kohler.com
CAXTON
®
Technical Information
Recommended Accessories
K-8998 P-Trap
Fixture*: Basin area Water depth
K-2209
K-2210/K-2210-L/
K-2210-N/K-2210-G
K-2211/K-2211-G/
K-2211-L
Drain hole
15 ″ (381 mm) x
12 ″ (305 mm)
17 ″ (432 mm) x
14 ″ (356 mm)
19 ″ (483 mm) x
15 ″ (381 mm)
Ø 1-3/4 ″ (44 mm)
4 ″
(102 mm)
4 ″
(102 mm)
4 ″
(102 mm)
* Approximate measurements for comparison only.
Cutout template, K-2209
Cutout template, K-2210
Cutout template, K-2211
85838-7
1151011-7
1018997-7
❑ CP
Installation Notes
❑ Other_____
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the current product template available at www.kohler.com, or by calling 1-800-4KOHLER. Kohler Co. is not responsible for cutout errors when the incorrect cutout template is used.
Will comply with ADA when installed per Section 606
Lavatories and Sinks of the 2010 ADA Standards for
Accessible Design.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Included components:
Basin clamp assembly (not included with
K-2210-L and K-2211-L)
1193643
K-2209: (X) = 14" (356 mm), (Y) = 17" (432 mm)
K-2210: (X) = 16-1/4" (413 mm), (Y) = 19-1/4" (489 mm)
K-2211: (X) = 17-1/4" (438 mm), (Y) = 21-1/4" (540 mm)
2-1/2" (64 mm)
5-1/8"
(130 mm)
2-5/8" (67 mm)
(X)
1" (25 mm) = K-2209
1-1/8" (29 mm)
(Y)
14"
(356 mm)
13-1/8"
(333 mm)
1/2" (13 mm)
7-1/2"
(191 mm)
ADA Drain Outlet
3/8" Hot
3/8" Cold
1-1/2" (38 mm)
1-1/4" OD
4" (102 mm)
Standard Installation
10-3/4"
(273 mm)
CAXTON
®
UNDER-MOUNT BATHROOM SINK
Page 2 of 2
105048-4DK
Product Diagram
24" (610 mm)
3" (76 mm)
10-3/4"
(273 mm)
34"
(864 mm)
8"
27"
(203 mm)
(686 mm)
Min
Min
9"
11"
(229 mm)
(279 mm)
Min
Recommended ADA Installation
Ø 3/8"
(10 mm)
5/8"
(16 mm)
Sealant
Marble Installation
Sealant
Wood Installation
