Amprobe TM45A Specifications

Amprobe TM45A Specifications
Amprobe® Test Tools offers a wide range
of devices for testing and measuring
electrical properties in various field
applications. Primary products include
Clamp Meters, Multimeters, Wire Tracers,
Megohmmeters, Environmental and
Voltage & Continuity testers.
www.Amprobe.eu
Our web site contains full data sheets with specifications,
application notes, software downloads, special promotions
and much more.
Amprobe® Test Tools
www.Amprobe.com
[email protected]
Everett, WA 98203 USA
tel: +1-877-AMPROBE (267-7623)
Beha-Amprobe GmbH
In den Engematten 14
79286 Glottertal, Germany
www.Amprobe.eu
[email protected]
Specifications subject to change without notice.
©2007 Amprobe Test Tools.
All rights reserved. Printed in The Netherlands.
09/07 2765603 NP-EN Rev C
Pub_ID: 11284-eng
Test Tools Catalog 2007/2008
New Product Highlights
Quality
and service
beyond
compare
IR608A
IR Thermometer with laser
The IR608A is an infrared thermometer with a
laser pointer for easy targeting. A quick and
effective diagnostic tool for identifying problems
in a wide variety of applications. The IR608A is
robust yet lightweight with
a solid ergonomic design.
Our Customers
Throughout the past 50 plus
years, the Amprobe® name has
become synonymous with clampon meters, to the point where it
is commonly used as a generic
term for such. Yet the brand has
expanded its product offering
to now over 250 items and has
become an established leader in
quality test equipment for
professionals in the electrical,
maintenance, construction, and
HVAC markets.
Our products
The products shown in this
catalog include an extensive
selection of portable multimeters,
clamp meters, power quality
analyzers, circuit tracers as well
as component checkers, HVAC
testers and specialty tools such
as electrical testers. Also shown
is a complete selection of
accessories.
(For more information turn to page 37)
The products shown in this
catalog are sold and supported by
a worldwide network of
Amprobe distributors and dealers.
Should you require any assistance
or have questions about our
products or their applications,
these local dealers stand ready to
serve you.
Automotive Multimeter
Model AU92 is a full
featured multimeter that has
additional measurement for
automotive servicing.
It offers a built-in
thermometer to measure air,
surface or immersion
temperatures. The meter also
tests engine RPM and dwell in
addition to standard multimeter
features of voltage, current,
resistance and continuity. Perform
accurate RPM measurements for
2- and 4-stroke automotive
engines using the Inductive Pickup
tool. A well designed tool for your
automotive testing needs.
(For more information turn to
page 13)
LH41A
AC/DC Low Current
Clamp Meter
ACD-10 TRMS-PLUS
Clamp on Multimeters with
Unique Thin Jaws
Two models to choose from, one with
True RMS measurements for voltage
and current. These two meters offer
thinner jaws from the standard clamp
meter. Almost a 6 mm thinner for
access into tight spaces. Measures up to
600 A AC. Both measure capacitance,
frequency through the jaws or test
leads. The Data Hold and Max features
allow for In-Rush current capturing.
(For more information turn to page 02)
#
5XP-A.................................................. 12
15XP-A................................................ 12
30XR-A................................................ 11
33XR-A................................................ 11
34XR-A................................................ 10
35XP-A................................................ 12
37XR-A................................................ 10
38XR-A................................................ 10
A
AU92
Our distributors
Index
The compact size of the LH41A
makes it ideal for taking
general measurements on
small conductors. Its excellent
accuracy and resolution of
1 mA offers exceptional
performance at a reasonable
price. The meter offers push
button dc Auto Zero for
accurate measurements. If
you’re working on batterybased systems monitoring of
load current on small and
medium ac and dc loads the
LH41A is an excellent choice.
(For more information
turn to page 07)
AC40B................................................... 2
AC50A................................................... 7
AC68C................................................... 6
AC71B................................................... 6
AC75B................................................... 6
ACD-6 PRO........................................... 4
ACD-6 TRMS-PRO............................... 4
ACD-10 PLUS....................................... 2
ACD-10 TRMS-PLUS............................ 2
ACD-14 PLUS....................................... 3
ACD-14 TRMS-PLUS............................ 3
ACD-15 TRMS-PRO............................. 5
ACD-16 PRO......................................... 7
ACD-16 TRMS-PRO............................. 7
ACD-31P............................................... 9
ACD-41PQ............................................. 9
ACD-56 HPQ......................................... 9
ACD-330T.............................................. 8
ACDC-100............................................. 5
ACDC-100 TRMS.................................. 5
ACDC-400............................................. 3
ACDC-620T........................................... 8
ACDC-3000........................................... 8
ACCESSORIES................................... 42
AD40B................................................... 2
AD105A................................................. 4
ALLTEST............................................. 29
AM-140 TRMS..................................... 16
AM-150 TRMS..................................... 16
AM-160 TRMS..................................... 16
AM-220................................................ 13
AM-240................................................ 13
AM8C................................................... 15
AMB-5KV............................................. 27
AMB-5KVD.......................................... 27
AMB-25................................................ 25
AMB-45................................................ 25
AT-1000............................................... 19
AT-2001............................................... 19
AT-2002............................................... 19
AT-2003............................................... 19
AT-2004............................................... 19
AT-2005............................................... 19
ATGC-1............................................... 19
AU92.................................................... 13
L
LCR55A............................................... 40
LH41A.................................................... 7
LM-80.................................................. 39
LM631A............................................... 39
LP10B.................................................. 31
LP25B.................................................. 31
M
B
BDM40................................................. 41
MT-1000L............................................ 30
Multitest Sigma.................................... 30
C
P
Combi Test 2019................................. 21
CR50A................................................. 40
D
DGC-1000A......................................... 28
Digital Ohm.......................................... 31
DM7C.................................................. 15
DM9C.................................................. 15
DM73C................................................ 13
DM78B................................................. 15
Download Suite................................... 27
E
ECB50A............................................... 20
ENERGYTEST 2020 E........................ 32
ES control............................................ 28
ES control PROF................................. 28
F
FG2C-UA............................................. 41
FG3C-UA............................................. 41
G
Genius 5035........................................ 20
GSC-53A............................................. 34
H
S
SM-70.................................................. 39
T
TDR-400.............................................. 18
TELARIS 0100-PLUS.......................... 22
TELARIS EARTH-TEST...................... 28
TELARIS ISO-PRO............................. 25
TELARIS LOOP-TEST........................ 24
TELARIS RCD-TEST.......................... 23
TH-3..................................................... 37
THWD-3............................................... 37
TM45A................................................. 36
TMA10A............................................... 36
TMD90A.............................................. 36
TMULD-300......................................... 38
TPP1-C1.............................................. 36
TPP2-C1.............................................. 36
U
ULD-300.............................................. 38
HD110C............................................... 17
HD160C............................................... 17
HV231-10A.......................................... 39
I
PM51A................................................. 14
PM53A................................................. 14
PM55A................................................. 14
PQ55A................................................. 32
PRM-3................................................. 31
IR608A................................................. 37
IR610A................................................. 37
ISO-PLUS-A........................................ 26
V
VP-440RT............................................ 30
VP-600SB............................................ 30
VT201A................................................ 30
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to highquality products and
customer service is
demonstrated by our
industry exclusive “No
Hassle” warranty. In the
unlikely event that an
Amprobe Test Tool
requires warranty service,
any of our local dealers
are authorized to replace
it, on the spot.
(note: €500 MSLP limit)
For detailed specifications go to www.Amprobe.eu
49
Table of Contents
CLAMP METERS
600A Clamp Multimeters
ACD-10 PLUS......................................02
ACD-10 TRMS-PLUS...........................02
400A Clamp Multimeters
AC40B.................................................02
AD40B................................................02
ACD-14 PLUS......................................03
ACD-14 TRMS-PLUS...........................03
ACDC-400...........................................03
Professional 1000A Clamp Meters
ACD-6 PRO.........................................04
ACD-6 TRMS-PRO..............................04
AD105A..............................................04
ACDC-100...........................................05
ACDC-100 TRMS................................05
Professional 2000A Clamp Meter
ACD-15 TRMS-PRO............................05
Specialty Clamp Multimeters
AC75B.................................................06
AC71B.................................................06
AC68C.................................................06
Leakage Clamp Meters
LH41A.................................................07
AC50A................................................07
Recording Clamp Multimeters
ACD-16 PRO.......................................07
ACD-16 TRMS-PRO............................07
Industrial Clamp Multimeters
ACDC-620T.........................................08
ACDC-3000.........................................08
ACD-330T...........................................08
Power Quality Clamp Meters
ACD-31P.............................................09
ACD-41PQ..........................................09
ACD-56HPQ........................................09
MULTIMETERS
Full-Features, Full-Size Multimeters
38XR-A...............................................10
37XR-A...............................................10
34XR-A...............................................10
33XR-A...............................................11
30XR-A...............................................11
Compact, Full-Featured Multimeters
35XP-A...............................................12
15XP-A...............................................12
5XP-A.................................................12
AM-220..............................................13
AM-240..............................................13
Automotive Multimeter
AU92..................................................13
Probe Style Multimeter
DM73C...............................................13
Pocket Multimeters
PM55A................................................14
PM53A................................................14
RCD Analyser
TELARIS RCD-TEST.............................23
Loop Resistance Test
TELARIS LOOP-TEST...........................24
Insulation Resistance Testers
AMB-45..............................................25
AMB-25..............................................25
TELARIS ISO-PRO...............................25
ISO-PLUS-A.........................................26
5000V Insulation Testers
ENVIRONMENTAL TESTERS
PM51A................................................14
General Purpose Meters
DM7C.................................................15
DM9C.................................................15
DM78B...............................................15
AM8C.................................................15
True RMS Precision Digital
Multimeters
AM-140 TRMS....................................16
AM-150 TRMS....................................16
AM-160 TRMS....................................16
Heavy-Duty Multimeters
HD160C..............................................17
HD110C..............................................17
AMB-5KVD.........................................27
AMB-5KV...........................................27
Software
Download Suite.................................27
ES control...........................................28
ES control PROF.................................28
Earth Resistance Testers
DGC-1000A........................................28
TELARIS EARTH-TEST.........................28
Machinery Tester
ALLTEST..............................................29
THWD-3..............................................37
Infrared Thermometer
IR608A................................................37
IR610A................................................37
Ultrasonic Leak Detection
ULD-300.............................................38
TMULD-300........................................38
Sound Meter
SM-70.................................................39
Light Meter
LM-80.................................................39
LM631A..............................................39
Air Flow
TMA10A.............................................36
Temperature
TMD90A.............................................36
TM45A................................................36
TPP1-C1..............................................36
TPP2-C1..............................................36
Relative Humidity
TH-3....................................................37
ELECTRICAL TESTERS
WIRE TRACERS
Impulse Reflectometer
TDR-400..............................................18
Advanced Wire Tracers
AT-2001..............................................19
AT-2002..............................................19
AT-2003..............................................19
AT-2004..............................................19
AT-2005..............................................19
AT-1000..............................................19
ATGC-1...............................................19
Breaker Tracers
ECB50A...............................................20
Non-Contact VoltProbes®
VP-440RT............................................30
VP-600SB............................................30
VT201A...............................................30
MT-1000L...........................................30
Voltage & Continuity Testers
Multitest Sigma.................................30
Digital Ohm.......................................31
COMPONENT TEST
Phase Sequence
PRM-3.................................................31
Specialty Probes
LP10B..................................................31
LP25B..................................................31
HV231-10A.........................................31
Function Generators
FG2C-UA.............................................41
FG3C-UA.............................................41
Bench Multimeter
BDM40...............................................41
POWER QUALITY
INSTALLATION/
INSULATION TESTERS
Multifunction Installation Testers
Genius 5035.......................................20
Combi Test 2019................................21
TELARIS 0100-PLUS............................22
Power Quality Recorder
PQ55A................................................32
Power Quality Analyzers
ENERGYTEST 2020 E..........................32
GSC-53A.............................................34
Handheld Component Testers
CR50A.................................................40
LCR55A...............................................40
BENCHTOP INSTRUMENTS
ACCESSORIES
...........................................................42
For detailed specifications go to www.Amprobe.eu
01
600A Clamp Multimeters
400A Clamp Multimeters
Amprobe’s ACD-10 PLUS meters offer thinner jaws over standard clamp meters. Allowing access
to tight measurement areas and still accomodating conductors up to 25 mm. Both meters also
measure Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very
versatile clamp multimeters.
The ACD-14 Plus is the professionals’ choice for both HVAC & Electrical applications due to
its complete set of measuring features. Its dual displays allows viewing amperage and voltage
measurements simultaneously.
ACD-14 PLUS, ACD-14 TRMS-PLUS
Digital Clamp Multimeters
ACD-10 PLUS, ACD-10 TRMS-PLUS
Clamp Multimeters with Unique Thin Jaws
TRMS Measurement (ACD-10 TRMS PLUS only)
B AC and DC Voltage to 600V
B AC Current to 600A
B Resistance to 40 MΩ with
Continuity Buzzer
B Capacitance to 3000 µF
B Frequency measurement
B
FEATURES
Hold & Maximum reading functions
B Auto ranging
B Thinner jaws (approx 6.35mm thinner)
B In Rush Current
B Jaw opening 25 mm
B Safety acc. EN 61010, CAT III/600 V
B
ACD-10 TRMS-PLUS
ACD-10 PLUS
Yes
N/A
TRMS Measurement
AC Voltage
4.000, 40.00, 400.0, 600V
DC Voltage
400.0m, 4.000, 40.00, 400.0, 600V
AC Current
40.00, 400.0, 600A
Resistance with
Continuity Buzzer
0-400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ,
4.000 MΩ, 40.00 MΩ
Capacitance
500.0nF, 5.000µF, 50.00µF, 500.0µF, 3000µF
Frequency
(Using Jaw or Test Leads)
40-400Hz with Jaw,
10Hz to 100kHz with test leads
400A Clamp Multimeters
B TRMS
B Continuity
B Dual
Measurement (ACD-14 TRMS-PLUS only)
Displays - Permits simultaneous reading
of Amperage & Voltage
B Micro Amps measurement for testing “Flame
Sensors”
B Capacitance to 3000 µF
B Temperature w/Type-K Thermocouple
B AC and DC Voltage to 600V
B AC current to 400A
B Resistance to 40MΩ
B Frequency
Buzzer
Measurement
B Auto Power Off
B Auto Ranging
B Hold & Maximum Readings
B In Rush Current
B Jaw opening 26 mm
B Safety acc. EN 61010, CAT III/600 V
This versatile clamp multimeter offers numerous measurement features in a
professional sized package.Versatile and rugged for facility maintenance to field service.
ACDC-400 Digital AC/DC Clamp Multimeter
AC/DC Current up to 400A
AC/DC Voltage up to 600V
B Resistance measurement
B Continuity test
B Data Hold
B MAX/MIN recording
B Relative measurement
Backlight
Analog bargraph
B Auto or Manual range selection
B “Third hand” - test probe holder
B Jaw opening 30 mm
B Safety acc. EN 61010, CAT III/600 V
B
B
B
B
AC40B/AD40B Mini Clamp Type Digital Multimeter / Clamp Meter
FEATURES
400 A AC range
B 600 V AC and DC range (only AC40B)
B 4000-count display with bargraph
B 10mA resolution in lowest range
B Autoranging
TRMS Measurement
Data Hold
B Auto power-off
B Jaw opening 25 mm
B Safety acc. EN 61010, CAT III/600 V
B
FEATURES
B
AD40B
AC40B
AC Voltage
N/A
400.0, 600 V
DC Voltage
N/A
AC Current
N/A
400 Ω
Continuity (audible)
N/A
Continuous Tone and •)))
Display at R < 40 Ω
Overload Protection
660A for AC current only
660V RMS for all other measurements
Resistance
02
400.0, 600 V
40.00, 400.0 A
For detailed specifications go to www.Amprobe.eu
ACD-14 FX
ACD-14 TRMS-FX
ACDC-400
N/A
Yes
N/A
AC Voltage
4.000, 40.00, 400.0, 600 V
400.0 m, 4.000, 40.00, 400.0,
600 V
DC Voltage
4.000, 40.00, 400.0, 600 V
400.0 m, 4.000, 40.00, 400.0,
600 V
AC Current
40.00 / 400.0 A
40.00 / 400.0 A
DC Current
N/A
40.00 / 400.0 A
400µA, 2000 µA
N/A
AC/DC Micro Amps (Using
Test Leads)
Resistance with
Continuity Buzzer
Capacitance
CLAMP METERS
These unique mini-clamp meters meet your needs when measuring up to 400 amps.
Their compact size make them a handy daily tool to fit into the slightest of tool kits. With an
easy to read digital display, Data Hold capability, Analog Bargraph and 10 mA resolution when
using the 40A range.
0-400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ,
4.000MΩ, 40.00 MΩ
500.0nF, 5.000µF, 50.00µF, 500.0µF, 3000µF
N/A
Frequency (Using Jaw or
Test Leads)
10Hz to 100kHz
N/A
Temperature
-20°C to 300°C
N/A
For detailed specifications go to www.Amprobe.eu
03
600A Clamp Multimeters
400A Clamp Multimeters
Amprobe’s ACD-10 PLUS meters offer thinner jaws over standard clamp meters. Allowing access
to tight measurement areas and still accomodating conductors up to 25 mm. Both meters also
measure Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very
versatile clamp multimeters.
The ACD-14 Plus is the professionals’ choice for both HVAC & Electrical applications due to
its complete set of measuring features. Its dual displays allows viewing amperage and voltage
measurements simultaneously.
ACD-14 PLUS, ACD-14 TRMS-PLUS
Digital Clamp Multimeters
ACD-10 PLUS, ACD-10 TRMS-PLUS
Clamp Multimeters with Unique Thin Jaws
TRMS Measurement (ACD-10 TRMS PLUS only)
B AC and DC Voltage to 600V
B AC Current to 600A
B Resistance to 40 MΩ with
Continuity Buzzer
B Capacitance to 3000 µF
B Frequency measurement
B
FEATURES
Hold & Maximum reading functions
B Auto ranging
B Thinner jaws (approx 6.35mm thinner)
B In Rush Current
B Jaw opening 25 mm
B Safety acc. EN 61010, CAT III/600 V
B
ACD-10 TRMS-PLUS
ACD-10 PLUS
Yes
N/A
TRMS Measurement
AC Voltage
4.000, 40.00, 400.0, 600V
DC Voltage
400.0m, 4.000, 40.00, 400.0, 600V
AC Current
40.00, 400.0, 600A
Resistance with
Continuity Buzzer
0-400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ,
4.000 MΩ, 40.00 MΩ
Capacitance
500.0nF, 5.000µF, 50.00µF, 500.0µF, 3000µF
Frequency
(Using Jaw or Test Leads)
40-400Hz with Jaw,
10Hz to 100kHz with test leads
400A Clamp Multimeters
B TRMS
B Continuity
B Dual
Measurement (ACD-14 TRMS-PLUS only)
Displays - Permits simultaneous reading
of Amperage & Voltage
B Micro Amps measurement for testing “Flame
Sensors”
B Capacitance to 3000 µF
B Temperature w/Type-K Thermocouple
B AC and DC Voltage to 600V
B AC current to 400A
B Resistance to 40MΩ
B Frequency
Buzzer
Measurement
B Auto Power Off
B Auto Ranging
B Hold & Maximum Readings
B In Rush Current
B Jaw opening 26 mm
B Safety acc. EN 61010, CAT III/600 V
This versatile clamp multimeter offers numerous measurement features in a
professional sized package.Versatile and rugged for facility maintenance to field service.
ACDC-400 Digital AC/DC Clamp Multimeter
AC/DC Current up to 400A
AC/DC Voltage up to 600V
B Resistance measurement
B Continuity test
B Data Hold
B MAX/MIN recording
B Relative measurement
Backlight
Analog bargraph
B Auto or Manual range selection
B “Third hand” - test probe holder
B Jaw opening 30 mm
B Safety acc. EN 61010, CAT III/600 V
B
B
B
B
AC40B/AD40B Mini Clamp Type Digital Multimeter / Clamp Meter
FEATURES
400 A AC range
B 600 V AC and DC range (only AC40B)
B 4000-count display with bargraph
B 10mA resolution in lowest range
B Autoranging
TRMS Measurement
Data Hold
B Auto power-off
B Jaw opening 25 mm
B Safety acc. EN 61010, CAT III/600 V
B
FEATURES
B
AD40B
AC40B
AC Voltage
N/A
400.0, 600 V
DC Voltage
N/A
AC Current
N/A
400 Ω
Continuity (audible)
N/A
Continuous Tone and •)))
Display at R < 40 Ω
Overload Protection
660A for AC current only
660V RMS for all other measurements
Resistance
02
400.0, 600 V
40.00, 400.0 A
For detailed specifications go to www.Amprobe.eu
ACD-14 FX
ACD-14 TRMS-FX
ACDC-400
N/A
Yes
N/A
AC Voltage
4.000, 40.00, 400.0, 600 V
400.0 m, 4.000, 40.00, 400.0,
600 V
DC Voltage
4.000, 40.00, 400.0, 600 V
400.0 m, 4.000, 40.00, 400.0,
600 V
AC Current
40.00 / 400.0 A
40.00 / 400.0 A
DC Current
N/A
40.00 / 400.0 A
400µA, 2000 µA
N/A
AC/DC Micro Amps (Using
Test Leads)
Resistance with
Continuity Buzzer
Capacitance
CLAMP METERS
These unique mini-clamp meters meet your needs when measuring up to 400 amps.
Their compact size make them a handy daily tool to fit into the slightest of tool kits. With an
easy to read digital display, Data Hold capability, Analog Bargraph and 10 mA resolution when
using the 40A range.
0-400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ,
4.000MΩ, 40.00 MΩ
500.0nF, 5.000µF, 50.00µF, 500.0µF, 3000µF
N/A
Frequency (Using Jaw or
Test Leads)
10Hz to 100kHz
N/A
Temperature
-20°C to 300°C
N/A
For detailed specifications go to www.Amprobe.eu
03
Professional 1000A Clamp Meters
Professional 1000A Clamp Meters
ACD-6 PRO, ACD-6 TRMS-PRO
1000 A AC Digital Clamp Meters
ACDC-100, ACDC-100 TRMS
1000 A AC/DC Digital Clamp Multimeters
These two ACD-6 high current clamp meters also offer multimeter measurements of AC and DC
voltage, Resistance and audible continuity. The True RMS version offers improved results when
measuring in noisy AC environments. Large digital display.
Where accuracy, quality, and newest technology meet. The ACDC-100 offers superior AC/DC
measurement capabilities, highest product quality and enhanced ergonomics. The TRMS version
addresses needs of professionals who rely on performance and reliability.
B TRMS
B Audible
B TRMS
B Includes
B Auto
(ACD-6 TRMS-PRO) when measuring in
noisy AC environments (ACD-6 TRMS-PRO only)
B AC Current to 1000A
B AC/DC voltage to 600V
B Resistance to 40 MΩ
B Diode Test
continuity
carrying case
B Extra large LCD for easy viewing of .
measurement results
B Jaw opening 45 mm
B Safety acc. EN 61010, CAT III/600 V
& Backlight Screen (ACDC-100 TRMS only)
and manual ranging
B Relative zero mode
B Auto power off
B MAX capture function for inrush current .
measurements (30 ms response)
B Data hold
B Audible
continuity
digital display
B Carrying case, test leads, batteries
and user manual included
B Jaw opening 50 mm
B Safety acc. EN 61010, CAT III/600 V
B Large
AD105A
True RMS 1000 A AC/DC Clamp Meter
ACD-15 TRMS-PRO
2000 A AC Digital Clamp Multimeter
A clamp meter designed for electrical contractors, electricians, and industrial plant maintenance
personnel. The AD105A measures AC and DC current up to 1000 Amps. Frequency is measured
by jaw up to 10kHz. Max Conductor of 50 mm.
The AC-15 clamp meter for when you need to measure high current. Measures up to 2000A AC.
Plus it measures AC and DC voltage, resistance and offers audible continuity. Additional feature is
a built in non-contact voltage detector. Choose the True RMS version when working in noisy AC
environments. Large digital display.
B TRMS
when measuring in noisy .
AC environments
B Wide range to 1000 Amps, AC and DC
B Measures frequency through the jaws or .
test leads
B Autoranging
FEATURES
TRMS Measurement
04
B 4000-count
B Belt-clip
sleeve case included
opening 50 mm
B Safety acc. EN 61010, CAT III/1000 V
B Jaw
ACD-6 PRO
ACD-6 TRMS-PRO
AD105A
N/A
Yes
Yes
AC Voltage
4.000, 40.00, 400.0, 600V
N/A
DC Voltage
400.0m, 4.000, 40.00, 400.0, 600V
N/A
Resistance
400.0 Ω
4.000 / 40.00 / 400.0 kΩ
4.000 / 10.00 MΩ
N/A
AC Current
400.0 / 1000 A
400, 1000 A
DC Current
N/A
N/A
400, 1000 A
Frequency
N/A
N/A
1 Hz in 4 kHz
For detailed specifications go to www.Amprobe.eu
B TRMS
& Backlight Screen
AC/DC Voltage up to
600V, AC Current up to 2000A,
Resistance, Frequency and Capacitance
B Non-contact Voltage Level Detection
B Audible continuity
B AutoTect™ feature automatically
selects DCV, ACV or Resistance Ω
B Auto
and manual ranging
power off
B Data hold
B Carrying case, test leads, batteries
(installed) and manual included
B “Third hand” - test probe holder
B Jaw opening 45 mm
B Safety acc. EN 61010, CAT III/600 V
B Measurements:
FEATURES
TRMS Measurement
B Auto
ACDC-100
ACDC-100 TRMS
N/A
Yes
ACD-15 TRMS-PRO
Yes
AC Current
400.0 / 800 A
DC Current
400.0, 1000 A
N/A
600V
6.000, 60.00, 600.0V
Resistance
400.0, 4.000k, 40.00k, 400.0, 4.000M,
40.00 MΩ
6.000k, 60.00k, 600.0k, 6.000 MΩ
Frequency
N/A
10Hz to 1kHz
500.0nF, 5.000, 50.00,
500.0, 3000 µF
100.0, 1000 nF
10.00, 100.0, 2000 µF
N/A
Yes
Voltage AC/DC
Capacitance
Non-contact Voltage
CLAMP METERS
Professional 2000A Clamp Meter
600.0 / 2000 A
For
Fordetailed
detailedspecifications
specificationsgo
goto
towww.Amprobe.com
www.Amprobe.eu
05
Professional 1000A Clamp Meters
Professional 1000A Clamp Meters
ACD-6 PRO, ACD-6 TRMS-PRO
1000 A AC Digital Clamp Meters
ACDC-100, ACDC-100 TRMS
1000 A AC/DC Digital Clamp Multimeters
These two ACD-6 high current clamp meters also offer multimeter measurements of AC and DC
voltage, Resistance and audible continuity. The True RMS version offers improved results when
measuring in noisy AC environments. Large digital display.
Where accuracy, quality, and newest technology meet. The ACDC-100 offers superior AC/DC
measurement capabilities, highest product quality and enhanced ergonomics. The TRMS version
addresses needs of professionals who rely on performance and reliability.
B TRMS
B Audible
B TRMS
B Includes
B Auto
(ACD-6 TRMS-PRO) when measuring in
noisy AC environments (ACD-6 TRMS-PRO only)
B AC Current to 1000A
B AC/DC voltage to 600V
B Resistance to 40 MΩ
B Diode Test
continuity
carrying case
B Extra large LCD for easy viewing of .
measurement results
B Jaw opening 45 mm
B Safety acc. EN 61010, CAT III/600 V
& Backlight Screen (ACDC-100 TRMS only)
and manual ranging
B Relative zero mode
B Auto power off
B MAX capture function for inrush current .
measurements (30 ms response)
B Data hold
B Audible
continuity
digital display
B Carrying case, test leads, batteries
and user manual included
B Jaw opening 50 mm
B Safety acc. EN 61010, CAT III/600 V
B Large
AD105A
True RMS 1000 A AC/DC Clamp Meter
ACD-15 TRMS-PRO
2000 A AC Digital Clamp Multimeter
A clamp meter designed for electrical contractors, electricians, and industrial plant maintenance
personnel. The AD105A measures AC and DC current up to 1000 Amps. Frequency is measured
by jaw up to 10kHz. Max Conductor of 50 mm.
The AC-15 clamp meter for when you need to measure high current. Measures up to 2000A AC.
Plus it measures AC and DC voltage, resistance and offers audible continuity. Additional feature is
a built in non-contact voltage detector. Choose the True RMS version when working in noisy AC
environments. Large digital display.
B TRMS
when measuring in noisy .
AC environments
B Wide range to 1000 Amps, AC and DC
B Measures frequency through the jaws or .
test leads
B Autoranging
FEATURES
TRMS Measurement
04
B 4000-count
B Belt-clip
sleeve case included
opening 50 mm
B Safety acc. EN 61010, CAT III/1000 V
B Jaw
ACD-6 PRO
ACD-6 TRMS-PRO
AD105A
N/A
Yes
Yes
AC Voltage
4.000, 40.00, 400.0, 600V
N/A
DC Voltage
400.0m, 4.000, 40.00, 400.0, 600V
N/A
Resistance
400.0 Ω
4.000 / 40.00 / 400.0 kΩ
4.000 / 10.00 MΩ
N/A
AC Current
400.0 / 1000 A
400, 1000 A
DC Current
N/A
N/A
400, 1000 A
Frequency
N/A
N/A
1 Hz in 4 kHz
For detailed specifications go to www.Amprobe.eu
B TRMS
& Backlight Screen
AC/DC Voltage up to
600V, AC Current up to 2000A,
Resistance, Frequency and Capacitance
B Non-contact Voltage Level Detection
B Audible continuity
B AutoTect™ feature automatically
selects DCV, ACV or Resistance Ω
B Auto
and manual ranging
power off
B Data hold
B Carrying case, test leads, batteries
(installed) and manual included
B “Third hand” - test probe holder
B Jaw opening 45 mm
B Safety acc. EN 61010, CAT III/600 V
B Measurements:
FEATURES
TRMS Measurement
B Auto
ACDC-100
ACDC-100 TRMS
N/A
Yes
ACD-15 TRMS-PRO
Yes
AC Current
400.0 / 800 A
DC Current
400.0, 1000 A
N/A
600V
6.000, 60.00, 600.0V
Resistance
400.0, 4.000k, 40.00k, 400.0, 4.000M,
40.00 MΩ
6.000k, 60.00k, 600.0k, 6.000 MΩ
Frequency
N/A
10Hz to 1kHz
500.0nF, 5.000, 50.00,
500.0, 3000 µF
100.0, 1000 nF
10.00, 100.0, 2000 µF
N/A
Yes
Voltage AC/DC
Capacitance
Non-contact Voltage
CLAMP METERS
Professional 2000A Clamp Meter
600.0 / 2000 A
For
Fordetailed
detailedspecifications
specificationsgo
goto
towww.Amprobe.com
www.Amprobe.eu
05
Specialty Clamp Multimeters
Leakage Clamp Meters
AC75B Three tools in one: 600 A AC clamp meter,
multimeter and thermometer
The compact size of these two meters make them ideal for taking general measurements on small
conductors. Their excellent accuracy and resolution offer exceptional performance.
Custom designed to make HVAC/R Service, Electrical, and Industrial
maintenance tasks faster and easier.
LH41A Low Current AC/DC Clamp Meter
B 600A
AC Current
B Digital thermometer 400 °C, Type K probe
included
B AC/DC 750 V/1000 V
B 40 MΩ Resistance
B Low DC µA Amps for flame rod .
detector testing
B Capacitance to 4000 µF for motor
run/start testing
B Continuity
beeper
B 4000-count large digit display
B Auto power off
B Full overload protection
B Jaw opening 35 mm
B Safety acc. EN 61010, CAT III/600 V, .
CAT II/1000 V
B Measures AC and DC current into the
low milliamp range up to 40A
B Auto Zero DC for correct measurement every time
B High 1 mA current resolution for quick circuit
comparison on sensor and control circuits
Auto power off function
Jaw opening 20 mm
B Safety acc. EN 61010, CAT III/300 V
B
B
AC50A Leakage AC Current Clamp Multimeter
B Min/Max control to see
largest and smallest values
B Jaw opening 30 mm
B Safety acc. EN 61010, CAT III/300 V
AC current measurement to 60 A
Leakage current measurements
with resolution of 0.01 mA
B AC voltage to 400 V
B Resistance measurement
and continuity beeper
B
B
Automatic AC clamp meter with two unique features: AutoTect™ and automatic
backlight. The AutoTect feature senses what type of measurement is being made across
the test leads. The automatic bright blue backlight has a sensor that recognizes when the
ambient light becomes dim and turns itself on.
B AutoTect™
Function – automatically
selects AC volts, DC volts or resistance
B Automatic bright blue backlight
B Easy one-button control
B AC current to 600 A
B AC volts to 750 V
B DC
volts to 1000 V
B Resistance and Continuity Beeper
B Data Hold
B Jaw opening 32 mm
B Safety acc. EN 61010, CAT III/600 V, .
CAT II/1000 V
Recording Clamp Multimeters
Need the perfect tool to troubleshoot a system? These clamp-ons provide a full range of
measurements, enhanced with data logging capabilities, to catch what the eye can’t see.
Double the efficiency, with an optional PC interface kit (RS-232 KIT2).
ACD-16 PRO, ACD-16 TRMS-PRO
1000A AC Data-Logging Clamp Multimeters
Auto power off
Automatic polarity
B Data hold
B “Third hand” - test probe holder
B Jaw opening 45 mm
B Safety acc. EN 61010, CAT III/600 V
B TRMS
AC68C AC/DC TRMS 600A Clamp Meter
Measures non-linear load current
True RMS reading
B Autoranging for frequency
measurement
B Data Hold button, holds the display
reading for all functions and ranges
B Measures freqency through jaws
or test leads
B Low battery indicator
B DC current (Zero adjustment button)
B Peak Hold, converts and displays
the peak value for AC volts and
amps readings
B Jaw opening 40 mm
B Carrying case included
B Safety acc. EN 61010, CAT III/300 V, .
CAT II/600 V
CLAMP METERS
AC71B Automatic 600 A AC Clamp Multimeter
& Backlight Screen .
(ACD-16 TRMS Pro only)
B Measurements: AC/DC Voltage up to
600V, AC Current up to 1000A,
Resistance, Frequency and Temperature
B Data-logging 5400 points
B Audible continuity
B
B
B
B
FEATURES
AC75B
­TRMS
N/A
LH41A
ACD-16
PRO
ACD-16
TRMS-PRO
N/A
1.3 V to 750.0 V
600 V
DC Voltage
4.000, 40.00, 400.0,
1000 V
1.8 V to 1000.0 V
-0.6 V to -1000.0 V
400.0, 600 V
AC Current
AC50A
Yes
AC Voltage
400.0 V
400.0, 600 A
Yes
N/A
600.0V
N/A
600.0V
40.00m, 400.0m,
4.000, 40.00, 60.0 A
N/A
40.0 / 400.0 / 1000 A
DC Current
400.0, 4000 A
N/A
400.0, 600 A
N/A
4.000, 40.00 A
N/A
Resistance
400, 4 k, 0 k, 400 k,
4 M, 40 MΩ
100.0 Ω
4.000 kΩ
400.0 Ω
N/A
999.9Ω
Diode Test
N/A
0.001 V
Continuity
Temperature
Peak Hold
N/A
Yes
N/A
4 n, 40 n, 400 n, 4 Ω,
40 Ω, 400 Ω, 4 mF
Frequency
For detailed specifications go to www.Amprobe.eu
AC68C
4.000, 40.00, 400.0,
750 V
Capacitance
06
AC71B
N/A
N/A
4.000 kHz, 20.00 kHz
0 °C, 400 °C
N/A
N/A
N/A
N/A
5.00Hz to 500.0Hz
N/A
Yes
-50 °C to 300 °C
N/A
For detailed specifications go to www.Amprobe.eu
07
Specialty Clamp Multimeters
Leakage Clamp Meters
AC75B Three tools in one: 600 A AC clamp meter,
multimeter and thermometer
The compact size of these two meters make them ideal for taking general measurements on small
conductors. Their excellent accuracy and resolution offer exceptional performance.
Custom designed to make HVAC/R Service, Electrical, and Industrial
maintenance tasks faster and easier.
LH41A Low Current AC/DC Clamp Meter
B 600A
AC Current
B Digital thermometer 400 °C, Type K probe
included
B AC/DC 750 V/1000 V
B 40 MΩ Resistance
B Low DC µA Amps for flame rod .
detector testing
B Capacitance to 4000 µF for motor
run/start testing
B Continuity
beeper
B 4000-count large digit display
B Auto power off
B Full overload protection
B Jaw opening 35 mm
B Safety acc. EN 61010, CAT III/600 V, .
CAT II/1000 V
B Measures AC and DC current into the
low milliamp range up to 40A
B Auto Zero DC for correct measurement every time
B High 1 mA current resolution for quick circuit
comparison on sensor and control circuits
Auto power off function
Jaw opening 20 mm
B Safety acc. EN 61010, CAT III/300 V
B
B
AC50A Leakage AC Current Clamp Multimeter
B Min/Max control to see
largest and smallest values
B Jaw opening 30 mm
B Safety acc. EN 61010, CAT III/300 V
AC current measurement to 60 A
Leakage current measurements
with resolution of 0.01 mA
B AC voltage to 400 V
B Resistance measurement
and continuity beeper
B
B
Automatic AC clamp meter with two unique features: AutoTect™ and automatic
backlight. The AutoTect feature senses what type of measurement is being made across
the test leads. The automatic bright blue backlight has a sensor that recognizes when the
ambient light becomes dim and turns itself on.
B AutoTect™
Function – automatically
selects AC volts, DC volts or resistance
B Automatic bright blue backlight
B Easy one-button control
B AC current to 600 A
B AC volts to 750 V
B DC
volts to 1000 V
B Resistance and Continuity Beeper
B Data Hold
B Jaw opening 32 mm
B Safety acc. EN 61010, CAT III/600 V, .
CAT II/1000 V
Recording Clamp Multimeters
Need the perfect tool to troubleshoot a system? These clamp-ons provide a full range of
measurements, enhanced with data logging capabilities, to catch what the eye can’t see.
Double the efficiency, with an optional PC interface kit (RS-232 KIT2).
ACD-16 PRO, ACD-16 TRMS-PRO
1000A AC Data-Logging Clamp Multimeters
Auto power off
Automatic polarity
B Data hold
B “Third hand” - test probe holder
B Jaw opening 45 mm
B Safety acc. EN 61010, CAT III/600 V
B TRMS
AC68C AC/DC TRMS 600A Clamp Meter
Measures non-linear load current
True RMS reading
B Autoranging for frequency
measurement
B Data Hold button, holds the display
reading for all functions and ranges
B Measures freqency through jaws
or test leads
B Low battery indicator
B DC current (Zero adjustment button)
B Peak Hold, converts and displays
the peak value for AC volts and
amps readings
B Jaw opening 40 mm
B Carrying case included
B Safety acc. EN 61010, CAT III/300 V, .
CAT II/600 V
CLAMP METERS
AC71B Automatic 600 A AC Clamp Multimeter
& Backlight Screen .
(ACD-16 TRMS Pro only)
B Measurements: AC/DC Voltage up to
600V, AC Current up to 1000A,
Resistance, Frequency and Temperature
B Data-logging 5400 points
B Audible continuity
B
B
B
B
FEATURES
AC75B
­TRMS
N/A
LH41A
ACD-16
PRO
ACD-16
TRMS-PRO
N/A
1.3 V to 750.0 V
600 V
DC Voltage
4.000, 40.00, 400.0,
1000 V
1.8 V to 1000.0 V
-0.6 V to -1000.0 V
400.0, 600 V
AC Current
AC50A
Yes
AC Voltage
400.0 V
400.0, 600 A
Yes
N/A
600.0V
N/A
600.0V
40.00m, 400.0m,
4.000, 40.00, 60.0 A
N/A
40.0 / 400.0 / 1000 A
DC Current
400.0, 4000 A
N/A
400.0, 600 A
N/A
4.000, 40.00 A
N/A
Resistance
400, 4 k, 0 k, 400 k,
4 M, 40 MΩ
100.0 Ω
4.000 kΩ
400.0 Ω
N/A
999.9Ω
Diode Test
N/A
0.001 V
Continuity
Temperature
Peak Hold
N/A
Yes
N/A
4 n, 40 n, 400 n, 4 Ω,
40 Ω, 400 Ω, 4 mF
Frequency
For detailed specifications go to www.Amprobe.eu
AC68C
4.000, 40.00, 400.0,
750 V
Capacitance
06
AC71B
N/A
N/A
4.000 kHz, 20.00 kHz
0 °C, 400 °C
N/A
N/A
N/A
N/A
5.00Hz to 500.0Hz
N/A
Yes
-50 °C to 300 °C
N/A
For detailed specifications go to www.Amprobe.eu
07
Industrial Clamp Multimeters
Power Quality Clamp Meter
ACDC-620T Digital 1000A AC/DC Clamp Multimeter
These instruments combine the standard features of professional clamp meters, with full Power
analyzing capabilities. Increase measuring efficiency using the ACD-31P or ACD-41PQ with an
optional PC interface kit (RS-232 KIT2). View individual harmonics using the ACD-56 HPQ.
TRMS Measurement
AC/DC Voltage up to 1000V, AC/DC
Current up to 1000A, Resistance,
Capacitance, Temperature, and
Continuity Buzzer
B Dynamic Min/Max/Avg recording
B In-rush Peak Current
capture (1 ms response)
B Temperature measurement
Dual Display of ºC & ºF readings
Continuity Buzzer
B Reading Hold function
B Auto/Manual Ranging and
Auto Power Off
B Analog Bar Graph indicator
B Jaw opening 52 mm
B Safety acc. EN 61010, CAT III/600 V
B
B
B
ACDC-3000 Digital 1000A AC/DC Clamp Multimeter
TRMS Measurement
AC Voltage up to 750V, DC Voltage up
to 1000V, AC/DC Current up to 1000A,
Resistance, Frequency, % Duty Cycle,
Continuity Buzzer
B Dynamic Recording of Max, Min and
Average readings
B In-rush Peak Current capture (1 ms response)
B Dual Display of Amp & Freq.,
Amps & Duty Cycle, Voltage & Freq.,
Voltage & Duty Cycle
B 43 Segment, High speed, Analog
Bar Graph
B Continuity Buzzer
B Auto/Manual Ranging and
Auto Power Off
B Jaw opening 52 mm
B Safety acc. EN 61010, CAT III/600 V
B
B
ACD-31P, ACD-41PQ
1000A Power Quality Clamp Meters
B TRMS
Measurement and Backlight Screen
Total Harmonics
Distortion (41PQ only)
B Voltage to 600V, Current to 1000A
B Resistance, Frequency & Temperature
B Active (W), Reactive (var) and
Apparent (VA) Power with
Power Factor
B Auto VA - Auto Selection of AC Volts,
DC Volts or AC Amps (ACD-41PQ only)
Measurement
Voltage up to 1000V, AC Current up to
1000A, Resistance, Continuity Buzzer, Frequency
B Dynamic Min/Max/Avg Recording
B In-rush Peak Current capture (1 ms)
B Reading Hold function
B Dual Display of Frequency with Current or Voltage
ACD-56 HPQ Power Quality Digital Clamp Multimeters
B TRMS
& Backlight Screen
Current up to 400A
B AC/DC Voltage up to 600V
B Resistance
B Frequency
B Capacitance
B Voltage and Current Harmonics up to 25th .
with THD%
B Non-contact Voltage Level Detection
B Audible continuity
B TRMS
B Continuity
B AC/DC
B Auto/Manual
Buzzer and Diode Test
ranging
B Auto power off
B Jaw opening 52 mm
B Safety acc. EN 61010, CAT III/600 V
FEATURES
08
PC interface capability
continuity
B Peak hold and Data hold
B “Third hand” - test probe holder
B Voltage overload protection for
all functions up to 600V AC/DC
B Jaw opening 45 mm
B Safety acc. EN 61010, CAT III/600V
B Audible
B Auto
and manual ranging
feature automatically
selects DCV, ACV or Resistance Ω
B MAX/MIN/AVG recording
B Auto power off
B “Third hand” - test probe holder
B Jaw opening 30 mm
B Safety acc. EN 61010, CAT III/600 V
B AC
ACD-330T Digital AC Clamp Multimeter
FEATURES
B Optional
B Measures
ACDC-620T
ACDC-3000
ACD-330T
ACD-31P
TRMS Measurement
AC Current
B Auto-check
ACD-41PQ
ACD-56 HPQ
Yes
Yes
40.00 / 400.0 / 1000 A
0 - 399.9 A
AC Voltage
400.0, 1000V
4.000, 40.00, 400.0, 750V
400.0, 1000V
600.0 V
1.6 - 599.9 V
DC Voltage
400.0, 1000V
4.000, 40.00, 400.0, 1000V
400.0, 1000V
Resistance
999.9 Ohms
0 – 499.9 / 999/ 1999 Ohms
Current AC/DC 400.0, 1000A
40.00, 400.0, 1000A
400.0, 1000A
Frequency
5.00Hz to 500.0 Hz
40.0 - 399.9 Hz
AC + DC TRMS Voltage
N/A
4.000, 40.00, 400.0, 750V
N/A
Active Power (W)
0 to 600.0 kW
N/A
AC + DC TRMS Current
N/A
40.00, 400.0, 1000A
N/A
Reactive Power (VAR)
0 to 600.0 kVAR
N/A
Resistance
400.0 Ω, 4.000 kΩ
400.0k Ω, 4.000MΩ, 40.00MΩ
400.0 Ω, 4.000 kΩ
Apparent Power (VA)
0 to 600.0 kVA
N/A
Capacitance
400.0, 4000 µF
N/A
N/A
Power Factor
0.10 to 0.99
0.20 - 1.00
Frequency
N/A
10.00-199.99 Hz, 1999 Hz,
2.00-19.99 kHz, 199.9 kHz
THD-R
N/A
100, 1000 Hz
THD-F
N/A
Temperature
-40°C to 1372°C
N/A
N/A
Temperature
% Duty Cycle
N/A
0.0-99.9%
N/A
In-rush Peak Current
Max (Ac or DC)
400.0, 1000 A
N/A
N/A
Continuity Buzzer
Yes
Yes
Yes
Diode Test
Yes
Yes
N/A
For detailed specifications go to www.Amprobe.eu
CLAMP METERS
B
Voltage AC/DC
0.0% to 99.9%
N/A
0.0% to 99.9%
N/A
-50° C to 300° C
N/A
AC Peak Voltage
N/A
10 to 850 V @ 1ms Rt
AC Peak Current
N/A
10 to 800 A @ 1ms Rt
Voltage / Current
Harmonics
N/A
THD, Individual harmonics 1 to 25
For detailed specifications go to www.Amprobe.eu
09
Industrial Clamp Multimeters
Power Quality Clamp Meter
ACDC-620T Digital 1000A AC/DC Clamp Multimeter
These instruments combine the standard features of professional clamp meters, with full Power
analyzing capabilities. Increase measuring efficiency using the ACD-31P or ACD-41PQ with an
optional PC interface kit (RS-232 KIT2). View individual harmonics using the ACD-56 HPQ.
TRMS Measurement
AC/DC Voltage up to 1000V, AC/DC
Current up to 1000A, Resistance,
Capacitance, Temperature, and
Continuity Buzzer
B Dynamic Min/Max/Avg recording
B In-rush Peak Current
capture (1 ms response)
B Temperature measurement
Dual Display of ºC & ºF readings
Continuity Buzzer
B Reading Hold function
B Auto/Manual Ranging and
Auto Power Off
B Analog Bar Graph indicator
B Jaw opening 52 mm
B Safety acc. EN 61010, CAT III/600 V
B
B
B
ACDC-3000 Digital 1000A AC/DC Clamp Multimeter
TRMS Measurement
AC Voltage up to 750V, DC Voltage up
to 1000V, AC/DC Current up to 1000A,
Resistance, Frequency, % Duty Cycle,
Continuity Buzzer
B Dynamic Recording of Max, Min and
Average readings
B In-rush Peak Current capture (1 ms response)
B Dual Display of Amp & Freq.,
Amps & Duty Cycle, Voltage & Freq.,
Voltage & Duty Cycle
B 43 Segment, High speed, Analog
Bar Graph
B Continuity Buzzer
B Auto/Manual Ranging and
Auto Power Off
B Jaw opening 52 mm
B Safety acc. EN 61010, CAT III/600 V
B
B
ACD-31P, ACD-41PQ
1000A Power Quality Clamp Meters
B TRMS
Measurement and Backlight Screen
Total Harmonics
Distortion (41PQ only)
B Voltage to 600V, Current to 1000A
B Resistance, Frequency & Temperature
B Active (W), Reactive (var) and
Apparent (VA) Power with
Power Factor
B Auto VA - Auto Selection of AC Volts,
DC Volts or AC Amps (ACD-41PQ only)
Measurement
Voltage up to 1000V, AC Current up to
1000A, Resistance, Continuity Buzzer, Frequency
B Dynamic Min/Max/Avg Recording
B In-rush Peak Current capture (1 ms)
B Reading Hold function
B Dual Display of Frequency with Current or Voltage
ACD-56 HPQ Power Quality Digital Clamp Multimeters
B TRMS
& Backlight Screen
Current up to 400A
B AC/DC Voltage up to 600V
B Resistance
B Frequency
B Capacitance
B Voltage and Current Harmonics up to 25th .
with THD%
B Non-contact Voltage Level Detection
B Audible continuity
B TRMS
B Continuity
B AC/DC
B Auto/Manual
Buzzer and Diode Test
ranging
B Auto power off
B Jaw opening 52 mm
B Safety acc. EN 61010, CAT III/600 V
FEATURES
08
PC interface capability
continuity
B Peak hold and Data hold
B “Third hand” - test probe holder
B Voltage overload protection for
all functions up to 600V AC/DC
B Jaw opening 45 mm
B Safety acc. EN 61010, CAT III/600V
B Audible
B Auto
and manual ranging
feature automatically
selects DCV, ACV or Resistance Ω
B MAX/MIN/AVG recording
B Auto power off
B “Third hand” - test probe holder
B Jaw opening 30 mm
B Safety acc. EN 61010, CAT III/600 V
B AC
ACD-330T Digital AC Clamp Multimeter
FEATURES
B Optional
B Measures
ACDC-620T
ACDC-3000
ACD-330T
ACD-31P
TRMS Measurement
AC Current
B Auto-check
ACD-41PQ
ACD-56 HPQ
Yes
Yes
40.00 / 400.0 / 1000 A
0 - 399.9 A
AC Voltage
400.0, 1000V
4.000, 40.00, 400.0, 750V
400.0, 1000V
600.0 V
1.6 - 599.9 V
DC Voltage
400.0, 1000V
4.000, 40.00, 400.0, 1000V
400.0, 1000V
Resistance
999.9 Ohms
0 – 499.9 / 999/ 1999 Ohms
Current AC/DC 400.0, 1000A
40.00, 400.0, 1000A
400.0, 1000A
Frequency
5.00Hz to 500.0 Hz
40.0 - 399.9 Hz
AC + DC TRMS Voltage
N/A
4.000, 40.00, 400.0, 750V
N/A
Active Power (W)
0 to 600.0 kW
N/A
AC + DC TRMS Current
N/A
40.00, 400.0, 1000A
N/A
Reactive Power (VAR)
0 to 600.0 kVAR
N/A
Resistance
400.0 Ω, 4.000 kΩ
400.0k Ω, 4.000MΩ, 40.00MΩ
400.0 Ω, 4.000 kΩ
Apparent Power (VA)
0 to 600.0 kVA
N/A
Capacitance
400.0, 4000 µF
N/A
N/A
Power Factor
0.10 to 0.99
0.20 - 1.00
Frequency
N/A
10.00-199.99 Hz, 1999 Hz,
2.00-19.99 kHz, 199.9 kHz
THD-R
N/A
100, 1000 Hz
THD-F
N/A
Temperature
-40°C to 1372°C
N/A
N/A
Temperature
% Duty Cycle
N/A
0.0-99.9%
N/A
In-rush Peak Current
Max (Ac or DC)
400.0, 1000 A
N/A
N/A
Continuity Buzzer
Yes
Yes
Yes
Diode Test
Yes
Yes
N/A
For detailed specifications go to www.Amprobe.eu
CLAMP METERS
B
Voltage AC/DC
0.0% to 99.9%
N/A
0.0% to 99.9%
N/A
-50° C to 300° C
N/A
AC Peak Voltage
N/A
10 to 850 V @ 1ms Rt
AC Peak Current
N/A
10 to 800 A @ 1ms Rt
Voltage / Current
Harmonics
N/A
THD, Individual harmonics 1 to 25
For detailed specifications go to www.Amprobe.eu
09
Five meters designed for electronic, electrical, plant maintenance and HVAC applications.
38XR-A
True RMS with optical PC interface
Great for field troubleshooting in industrial, automation, process and
plant environments.
B 10,000-count
with high 0.25 % accuracy
blue backlight for dim environments
B Duty cycle, capacitance and frequency
B Magne-Grip™ holster with magnetic hanging strap
B 4-20 mA loop current with % readout
B Temperature to 1300 °C, type K thermocouple included
B True-RMS AC + DC coupled for accurate measurements
B RS-232 data out for use with optional software, Model 38SW-A
B Safety acc. EN 61010, CAT IV/600V, CAT III/1000 V
B Bright
33XR-A Manual ranging w/ temperature & capacitance
33XR-A gives the contractor and field service technician all the essential measurement
functions they need in a rugged package.
B Temperature,
frequency & capacitance
4000 µF capacitance range for motor run/start testing
B Magne-Grip™ holster with magnetic hanging strap
B Data hold, Peak Hold, Min/Max and REL
B Safety acc. EN 61010, CAT III/600 V, CAT II/1000 V
B Extended
30XR-A Includes VolTect™, a built-in non-contact
voltage tester
The 30XR-A has all the basic functions for automotive, residential and
education applications.
MULTIMETERS
Full-Featured, Full-Size Multimeters
B 9
functions, 30 ranges handles most measurement needs
holster with magnetic hanging strap frees both
hands for work
B Battery/fuse door designed for easy accessibility
B Battery tester
B Safety acc. EN 61010, CAT III/300V, CAT II/600 V
B Magne-Grip™
37XR-A
True RMS with component and logic test
True RMS meter for electronics troubleshooting at the bench or job site. The
highest accuracy meter in the XR series.
B Autoranging
10,000 count with 0.1 % accuracy for the most .
accurate measurements
B LCR functions: inductance, capacitance and resistance
B Frequency, duty cycle and logic test
B Bright blue backlight for dim environments
B Magne-Grip™ holster with magnetic hanging strap
B Safety acc. EN 61010, CAT III/600V, CAT II/1000 V
FEATURES
30XR-A
34XR-A
37XR-A
38XR-A
DC Voltage
200.0mV, 2.000,
20.00, 200.0, 600V
400.0m, 4.000, 40.00,
400.0, 1000V
1000m, 10.00, 100.0, 1000V
AC Voltage
200.0mV, 2.000,
20.00, 200.0, 600V
400.0m, 4.000, 40.00, 400.0, 750V
1000m, 10.00, 100.0, 750V
DC Current
200.0µ, 2.000m,
20.00m, 200.0m, 10A
400.0µ, 4.000m, 40.00m,
300.0m, 10.00A
100.0µ, 1000µ, 10.00m, 100.0m,
400.0m, 10.00A
AC Current
200.0µ, 2.000m,
20.00m, 200.0m, 10A
400.0µ, 4.000m, 40.00m,
300.0m, 10.00A
100.0µ, 1000µ, 10.00m, 100.0m,
400.0m, 10.00A
34XR-A
True RMS with temperature and backlight
Resistance
Designed for maintenance, repair and installation of electrical and
electro-mechanical equipment. Ideal for contractors and field service technicians.
Continuity
Yes
Diode
Yes
B True
Non-contact
voltage detect
Yes
Capacitance
N/A
4.000µF, 40.00µF, 400.0µF, 4000µF
40.00n, 400.0n, 4.000µ, 40.00µ, 400.0µF
Frequency
N/A
4.000k, 40.00k, 400.0k, 1MHz
100.00, 1.0000k, 10.000k, 100.00k,
1.0000M, 10.000MHz
Temperature
N/A
1000 °C
1000 °C
Duty cycle
N/A
N/A
0.0 to 90.0 %
RMS for the most accurate measurements
4000 µF capacitance range for motor run/start testing
B Bright blue backlight for dim environments
B Duty cycle, frequency and capacitance for complete measurement capability
B Temperature to 1000 °C with a type K thermocouple included
B Magne-Grip™ holster with magnetic hanging strap
B Data hold, Min/Max and bar grap
B Safety acc. EN 61010, CAT III/600V, CAT II/1000 V
B Extended
200.0 Ω, 2.000k,
20.00k, 200.0k,
2.000M, 20.00MΩ
400.0, 4.000k,
40.00k, 400.0k,
4.000M, 40.00MΩ
1000.0, 10.000k, 100.00k, 1000.0k,
10.00M, 40.00MΩ
N/A
1300 °C
0.00 to 90.00 %
N/A
Yes
N/A
N/A
40 H
N/A
-13dBm to + 50dBm
-13dBm to + 50dBm
N/A
1.5V, 9V
Magne-Grip™
Holster with
magnetic
hanging
strap
This
holster
protects
the meter
and provides the “third
hand” DMM users need.
A magnetic hanging strap
secures the meter to a
convenient steel surface,
freeing both hands for work.
N/A
Inductance
Battery test
For detailed specifications go to www.Amprobe.eu
400.0, 40.00k,
4.000MΩ
Logic test
dBm
10
33XR-A
N/A
Optional RS-232
cable and
software, 38-SWA
Real-time data acquisition
software logs and displays
data from all 38XR-A
measurement functions.
For detailed specifications go to www.Amprobe.eu
11
Five meters designed for electronic, electrical, plant maintenance and HVAC applications.
38XR-A
True RMS with optical PC interface
Great for field troubleshooting in industrial, automation, process and
plant environments.
B 10,000-count
with high 0.25 % accuracy
blue backlight for dim environments
B Duty cycle, capacitance and frequency
B Magne-Grip™ holster with magnetic hanging strap
B 4-20 mA loop current with % readout
B Temperature to 1300 °C, type K thermocouple included
B True-RMS AC + DC coupled for accurate measurements
B RS-232 data out for use with optional software, Model 38SW-A
B Safety acc. EN 61010, CAT IV/600V, CAT III/1000 V
B Bright
33XR-A Manual ranging w/ temperature & capacitance
33XR-A gives the contractor and field service technician all the essential measurement
functions they need in a rugged package.
B Temperature,
frequency & capacitance
4000 µF capacitance range for motor run/start testing
B Magne-Grip™ holster with magnetic hanging strap
B Data hold, Peak Hold, Min/Max and REL
B Safety acc. EN 61010, CAT III/600 V, CAT II/1000 V
B Extended
30XR-A Includes VolTect™, a built-in non-contact
voltage tester
The 30XR-A has all the basic functions for automotive, residential and
education applications.
MULTIMETERS
Full-Featured, Full-Size Multimeters
B 9
functions, 30 ranges handles most measurement needs
holster with magnetic hanging strap frees both
hands for work
B Battery/fuse door designed for easy accessibility
B Battery tester
B Safety acc. EN 61010, CAT III/300V, CAT II/600 V
B Magne-Grip™
37XR-A
True RMS with component and logic test
True RMS meter for electronics troubleshooting at the bench or job site. The
highest accuracy meter in the XR series.
B Autoranging
10,000 count with 0.1 % accuracy for the most .
accurate measurements
B LCR functions: inductance, capacitance and resistance
B Frequency, duty cycle and logic test
B Bright blue backlight for dim environments
B Magne-Grip™ holster with magnetic hanging strap
B Safety acc. EN 61010, CAT III/600V, CAT II/1000 V
FEATURES
30XR-A
34XR-A
37XR-A
38XR-A
DC Voltage
200.0mV, 2.000,
20.00, 200.0, 600V
400.0m, 4.000, 40.00,
400.0, 1000V
1000m, 10.00, 100.0, 1000V
AC Voltage
200.0mV, 2.000,
20.00, 200.0, 600V
400.0m, 4.000, 40.00, 400.0, 750V
1000m, 10.00, 100.0, 750V
DC Current
200.0µ, 2.000m,
20.00m, 200.0m, 10A
400.0µ, 4.000m, 40.00m,
300.0m, 10.00A
100.0µ, 1000µ, 10.00m, 100.0m,
400.0m, 10.00A
AC Current
200.0µ, 2.000m,
20.00m, 200.0m, 10A
400.0µ, 4.000m, 40.00m,
300.0m, 10.00A
100.0µ, 1000µ, 10.00m, 100.0m,
400.0m, 10.00A
34XR-A
True RMS with temperature and backlight
Resistance
Designed for maintenance, repair and installation of electrical and
electro-mechanical equipment. Ideal for contractors and field service technicians.
Continuity
Yes
Diode
Yes
B True
Non-contact
voltage detect
Yes
Capacitance
N/A
4.000µF, 40.00µF, 400.0µF, 4000µF
40.00n, 400.0n, 4.000µ, 40.00µ, 400.0µF
Frequency
N/A
4.000k, 40.00k, 400.0k, 1MHz
100.00, 1.0000k, 10.000k, 100.00k,
1.0000M, 10.000MHz
Temperature
N/A
1000 °C
1000 °C
Duty cycle
N/A
N/A
0.0 to 90.0 %
RMS for the most accurate measurements
4000 µF capacitance range for motor run/start testing
B Bright blue backlight for dim environments
B Duty cycle, frequency and capacitance for complete measurement capability
B Temperature to 1000 °C with a type K thermocouple included
B Magne-Grip™ holster with magnetic hanging strap
B Data hold, Min/Max and bar grap
B Safety acc. EN 61010, CAT III/600V, CAT II/1000 V
B Extended
200.0 Ω, 2.000k,
20.00k, 200.0k,
2.000M, 20.00MΩ
400.0, 4.000k,
40.00k, 400.0k,
4.000M, 40.00MΩ
1000.0, 10.000k, 100.00k, 1000.0k,
10.00M, 40.00MΩ
N/A
1300 °C
0.00 to 90.00 %
N/A
Yes
N/A
N/A
40 H
N/A
-13dBm to + 50dBm
-13dBm to + 50dBm
N/A
1.5V, 9V
Magne-Grip™
Holster with
magnetic
hanging
strap
This
holster
protects
the meter
and provides the “third
hand” DMM users need.
A magnetic hanging strap
secures the meter to a
convenient steel surface,
freeing both hands for work.
N/A
Inductance
Battery test
For detailed specifications go to www.Amprobe.eu
400.0, 40.00k,
4.000MΩ
Logic test
dBm
10
33XR-A
N/A
Optional RS-232
cable and
software, 38-SWA
Real-time data acquisition
software logs and displays
data from all 38XR-A
measurement functions.
For detailed specifications go to www.Amprobe.eu
11
Compact, Full-Featured Multimeters
The three XP Series digital multimeters are full-featured, compact in size with two unique extras:
VolTect™ and our exclusive Magne-Grip™ Holster. Every XP DMM includes select features that
make your testing safer, easier, and more efficient whether it be in field service, electronic repair,
electrical or HVAC applications. Delivering the best performance in a compact instrument, the XP
Series is the right choice for your work.
35XP-A For HVAC, plant maintenance
technicians and residential electricians
B Temperature
measurement capability to 1000 °C
for motor run/start test
B 0.1 µA resolution for flame sensor testing
B Frequency
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
B Capacitance
Don't let the compact size of these meters fool you. Housed in a well-built and sturdy case design,
they still offer a complete feature measurement set. Built for the field service person
who uses their meter every day. But also a great meter for those occasional measurement
requirements. Temperature capability in Model AM-240.
AM-220, AM-240 Compact, Full-Featured Digital Multimeters
B AC
B AC/DC
B AC
and DC voltage to 600V
and DC current to 10A
B Temperature to 750 °C
B Resistance to 40 MΩ
B Capacitance to 4000 µF
B Frequency
B Temperature measurement with
selectable F/C (AM-240 only)
B MAX,
micro Amps for sensors diagnosis
MIN and Relative measurements
B Auto and Manual Ranging
B Tilt stand
B Safety acc. EN 61010, CAT III/600 V
Automotive Multimeter
15XP-A For electronics engineers,
technicians and field service
Model AU92 is a full featured multimeter that has additional measurement features for
automotive servicing. It offers a built-in thermometer and tests engine RPM and dwell as well
as standard multimeter features of voltage, current, resistance and continuity.
B Autoranging
display for faster measurements
logic test for digital circuits
B Integrated tilt stand for easy bench use
B Diode test for component level troubleshooting
B Special 2000 MΩ resistance range
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
B TTL
AU92 Digital Automotive Multimeter
B Performs all standard electrical test
for on-car and bench troubleshooting
including tach, dwell, volts, ohms & diode
B Tests engine RPM and dwell
B Measures AC/DC voltage, DC current,
resistance, diodes and continuity beeper
B Accurate RPM measurements for
2- and 4-stroke automotive engines
using the Inductive Pickup
B Locate faulty wiring and components
5XP-A For residential, commercial and
general troubleshooting applications
B 27
ranges/10 functions: a complete performance, .
general purpose digital multimeter
B Battery load test with 1.5 volt and 9 volt capabilities
B Min/Max records minimum and maximum values
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
B Data
Hold button retains display data
cycle and direct DWELL reading
B High impact over-molded case
B Includes inductive pick-up probe, test
leads, test lead extender tips, threaded
alligator clips, type k temperature
probe, spare fuse
B Duty
Probe Style Multimeter
5XP-A
15XP-A
35XP-A
DC Voltage
200.0mV, 2.000, 20.00, 200.0, 1000V
400.0m, 4.000, 40.00,
400.0, 1000V
AC Voltage
200.0mV, 2.000, 20.00, 200.0, 750V
400.0m, 4.000, 40.00,
400.0, 750V
Current AC/DC
200.0µ, 2.000m,
20.00m, 200.0mA
200.0µ, 2.000m, 20.00m,
200.0m, 2A
400.0µA, 4.000µA, 40.00mA,
400.0mA, 2A
Resistance
200.0 Ω, 2.000k,
20.00k, 200.0k,
2.000M, 20.00MΩ
200.0 Ω, 2.000k, 20.00k,
200.0k, 2.000M, 20.00M,
2000MΩ
400.0, 4.000k, 40.00k, 400.0k, 4.000M,
40.00MΩ
Continuity beeper
Capacitance
N/A
4.000n, 40.00n, 400.0n, 4.000µ,
40.00µ, 400.0µ, 4.000mF
Frequency
N/A
4.000k, 40.00k, 400.0k, 1MHz
Temperature
N/A
-20 °C to1000 °C
Battery test
N/A
1.5 V, 9 V
TTL, 20 MHz
N/A
N/A
Available on all XP Series meters: Magne-Grip™ Holster with magnetic hanging strap frees both hands for work.
VolTect™ non-contact voltage detection lets you instantly detect dangerous ac line voltages.
12
For detailed specifications go to www.Amprobe.eu
FEATURES
Voltage AC
Current AC/DC
70 V to 600 VAC (50 Hz to 60 Hz)
Logic test
B Unique pen shape for measuring
in hard to get to places
B Two Probe Tip sizes, 75 and 13 mm
B Data Hold to freeze measurement value
B Includes alligator grounding clip
Voltage DC
Yes
Non-contact voltage
DM73C Probe Style Multimeter for one-hand operation
Resistance
Capacitance
Frequency
B 3400-count digital plus
analog bargraph
B Safety acc. EN 61010, CAT III/300 V, .
CAT II/600 V
AM-220
AM-240
3.400, 34.00, 340.0, 600V
340.0m, 3.400, 34.00, 340.0, 600V
400.0µ, 4000µ, 40.00m, 400.0m, 4.000, 10.00A
N/A
400.0, 4.000k, 40.00k, 400.0k,
4.000M, 40.00MΩ
340.0, 3.400k, 34.00k, 340.0k, 3.400M,
34.00MΩ
40.00n, 400.0n, 4.000µ, 40.00µ, 400.0µ, 4000µF
N/A
10.00, 100.0, 1000, 10.00k, 100.0k, 1000k, 10MHz
N/A
N/A
Yes
Continuity
Yes
Duty Cycle
Temperature
DM73C
400m, 4.000, 40.00, 400.0, 600 V
Diode
MULTIMETERS
FEATURES
0.1%-99.9%
N/A
N/A
-50° to 750°C
N/A
For detailed specifications go to www.Amprobe.eu
13
Compact, Full-Featured Multimeters
The three XP Series digital multimeters are full-featured, compact in size with two unique extras:
VolTect™ and our exclusive Magne-Grip™ Holster. Every XP DMM includes select features that
make your testing safer, easier, and more efficient whether it be in field service, electronic repair,
electrical or HVAC applications. Delivering the best performance in a compact instrument, the XP
Series is the right choice for your work.
35XP-A For HVAC, plant maintenance
technicians and residential electricians
B Temperature
measurement capability to 1000 °C
for motor run/start test
B 0.1 µA resolution for flame sensor testing
B Frequency
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
B Capacitance
Don't let the compact size of these meters fool you. Housed in a well-built and sturdy case design,
they still offer a complete feature measurement set. Built for the field service person
who uses their meter every day. But also a great meter for those occasional measurement
requirements. Temperature capability in Model AM-240.
AM-220, AM-240 Compact, Full-Featured Digital Multimeters
B AC
B AC/DC
B AC
and DC voltage to 600V
and DC current to 10A
B Temperature to 750 °C
B Resistance to 40 MΩ
B Capacitance to 4000 µF
B Frequency
B Temperature measurement with
selectable F/C (AM-240 only)
B MAX,
micro Amps for sensors diagnosis
MIN and Relative measurements
B Auto and Manual Ranging
B Tilt stand
B Safety acc. EN 61010, CAT III/600 V
Automotive Multimeter
15XP-A For electronics engineers,
technicians and field service
Model AU92 is a full featured multimeter that has additional measurement features for
automotive servicing. It offers a built-in thermometer and tests engine RPM and dwell as well
as standard multimeter features of voltage, current, resistance and continuity.
B Autoranging
display for faster measurements
logic test for digital circuits
B Integrated tilt stand for easy bench use
B Diode test for component level troubleshooting
B Special 2000 MΩ resistance range
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
B TTL
AU92 Digital Automotive Multimeter
B Performs all standard electrical test
for on-car and bench troubleshooting
including tach, dwell, volts, ohms & diode
B Tests engine RPM and dwell
B Measures AC/DC voltage, DC current,
resistance, diodes and continuity beeper
B Accurate RPM measurements for
2- and 4-stroke automotive engines
using the Inductive Pickup
B Locate faulty wiring and components
5XP-A For residential, commercial and
general troubleshooting applications
B 27
ranges/10 functions: a complete performance, .
general purpose digital multimeter
B Battery load test with 1.5 volt and 9 volt capabilities
B Min/Max records minimum and maximum values
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
B Data
Hold button retains display data
cycle and direct DWELL reading
B High impact over-molded case
B Includes inductive pick-up probe, test
leads, test lead extender tips, threaded
alligator clips, type k temperature
probe, spare fuse
B Duty
Probe Style Multimeter
5XP-A
15XP-A
35XP-A
DC Voltage
200.0mV, 2.000, 20.00, 200.0, 1000V
400.0m, 4.000, 40.00,
400.0, 1000V
AC Voltage
200.0mV, 2.000, 20.00, 200.0, 750V
400.0m, 4.000, 40.00,
400.0, 750V
Current AC/DC
200.0µ, 2.000m,
20.00m, 200.0mA
200.0µ, 2.000m, 20.00m,
200.0m, 2A
400.0µA, 4.000µA, 40.00mA,
400.0mA, 2A
Resistance
200.0 Ω, 2.000k,
20.00k, 200.0k,
2.000M, 20.00MΩ
200.0 Ω, 2.000k, 20.00k,
200.0k, 2.000M, 20.00M,
2000MΩ
400.0, 4.000k, 40.00k, 400.0k, 4.000M,
40.00MΩ
Continuity beeper
Capacitance
N/A
4.000n, 40.00n, 400.0n, 4.000µ,
40.00µ, 400.0µ, 4.000mF
Frequency
N/A
4.000k, 40.00k, 400.0k, 1MHz
Temperature
N/A
-20 °C to1000 °C
Battery test
N/A
1.5 V, 9 V
TTL, 20 MHz
N/A
N/A
Available on all XP Series meters: Magne-Grip™ Holster with magnetic hanging strap frees both hands for work.
VolTect™ non-contact voltage detection lets you instantly detect dangerous ac line voltages.
12
For detailed specifications go to www.Amprobe.eu
FEATURES
Voltage AC
Current AC/DC
70 V to 600 VAC (50 Hz to 60 Hz)
Logic test
B Unique pen shape for measuring
in hard to get to places
B Two Probe Tip sizes, 75 and 13 mm
B Data Hold to freeze measurement value
B Includes alligator grounding clip
Voltage DC
Yes
Non-contact voltage
DM73C Probe Style Multimeter for one-hand operation
Resistance
Capacitance
Frequency
B 3400-count digital plus
analog bargraph
B Safety acc. EN 61010, CAT III/300 V, .
CAT II/600 V
AM-220
AM-240
3.400, 34.00, 340.0, 600V
340.0m, 3.400, 34.00, 340.0, 600V
400.0µ, 4000µ, 40.00m, 400.0m, 4.000, 10.00A
N/A
400.0, 4.000k, 40.00k, 400.0k,
4.000M, 40.00MΩ
340.0, 3.400k, 34.00k, 340.0k, 3.400M,
34.00MΩ
40.00n, 400.0n, 4.000µ, 40.00µ, 400.0µ, 4000µF
N/A
10.00, 100.0, 1000, 10.00k, 100.0k, 1000k, 10MHz
N/A
N/A
Yes
Continuity
Yes
Duty Cycle
Temperature
DM73C
400m, 4.000, 40.00, 400.0, 600 V
Diode
MULTIMETERS
FEATURES
0.1%-99.9%
N/A
N/A
-50° to 750°C
N/A
For detailed specifications go to www.Amprobe.eu
13
Pocket Multimeters, PM Series
General Purpose Meters
Three multimeters with innovative features in an ultra-compact size. Simplified interface with
easy one-touch button control, oversize digital display screens.
Turn to this selection of general purpose testers when you need a choice between
analog, compact, digital or unique sizes. These meters are great for the everyday user
or for those occasional measurements you need to make.
Compact size offers a meter that is only .95 cm (.375 in) thick and weighs less than 85 g (3 oz).
Low Z input impedance to eliminate ghost voltages. Hi Z input impedance for electronic circuitry
(PM55A only).
feature detects and displays AC volts, DC volts or resistance
B VolTect™ feature, a built-in AC voltage detector
B Extra features of capacitance, frequency and microamp current
B Option of Hi Z or Low Z input impedance for ghost voltages
B Includes zippered carrying case and protective holster
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
functions/16 ranges
test: Buzzer alert
B Auto power off saves batteries
B Data Hold
B Protective case included
AC voltage detection, VolTect™ feature
B AutoTect™ feature detects and displays AC volts, DC volts or resistance
B Low Z input impedance eliminates ghost voltage readings
B Safety acc. EN 61010, CAT III/300 V, CAT II/450 V
B Continuity
PM51A Pocket size multimeter with frequency & capacitance
B Seven
different measurement functions with 27 full ranges of measurement
B Oversized digital display with large digits and icons
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
Frequency
Capacitance
14
AC Voltage
200.0, 600V
400.0m, 4.000, 40.00,
400.0, 600V
3.200, 32.00,
320.0, 600V
50, 150, 300 V
400.0u, 2000uA
DC Current
200 mA
40.00, 400m, 10.00A
N/A
0.5, 10, 250 mA
10.00 Hz - 30.00 kHz
AC Current
N/A
40.00, 400m, 10.00A
N/A
N/A
400.0, 4.000k, 40.00k,
400.0k, 4.000M, 40.00MΩ
320.0, 3.200k, 32.00k,
320.0k, 3.200M,
32.00MΩ
5 k Ω, 500 kΩ
N/A
Yes
For detailed specifications go to www.Amprobe.eu
zero adjust
size
B Safety acc. EN 61010, .
CAT II/300 V
B Compact
2.5, 10, 50, 150,
300 V
100.0n, 1000n, 10.00µ, 100.0µF
0.48mA
FEATURES
B Ohms
320.0m, 3.200, 32.00,
320.0, 600V
600.0, 6.000k, 60.00k, 600.0k, 6.000MΩ
N/A
B High sensitivity taut
band movement
B Five functions/15 ranges
B Battery test
400.0m, 4.000, 40.00,
400.0, 600V
500.0n, 5.000µ, 50.00µ,
500.0µ, 3000µF
0.25mA
AM8C Analog multimeter for the home,
car or workshop
2.000, 20.00,
200.0, 600V
6.000, 60.00, 600.0V
Diode test
B 3200-count display with
analog bargraph
B Safety acc. EN 61010, .
CAT II/300 V
DC Voltage
6.000, 60.00, 450.0V
Non-Contact Voltage
Detection
holster included
acc. EN 61010, CAT II/600 V
AM8B
400.0m, 4.000, 40.00,
400.0, 600V
100 Hz, 1 kHz, and
10 kHz
B Safety
DM78B
PM55A
N/A
B Protective
DM9C
PM53A
400 Hz, 4 kHz, 40 kHz,
400 kHz, and 1 MHz
holster included
acc. EN 61010, CAT II/600 V
DM7C
PM51A
AC/DC uA Current
B Safety
B 5
B Non-contact
400.0, 4.000k, 40.00k,
400.0k, 4.000M, 40.00MΩ
functions/14 ranges
ranges to test batteries
B Industry standard test leads,
safety rated
DM78B Voltage, continuity, diode and
resistance in a credit card size meter
PM53A Pocket size digital multimeter with AutoTect™
Resistance
B Protective
B Special
B High-resolution,
4000-count autoranging
B 7 functions/23 ranges
B Battery Test Function
with Go/NoGo LED indicator
B AutoTect™
Voltage AC/DC
B 6
DM9C Compact autoranging meter
PM55A Automatic Precision Pocket Multimeter
FEATURES
DM7C Compact multimeter
MULTIMETERS
Progressive design with two remarkable features called VolTect™ and AutoTect™. VolTect™
feature is a built-in AC voltage detector. Auto-Tect™ feature is a function that automatically
selects the meter to display between AC volts, DC volts or resistance, depending upon what the
meter senses at the probe tips (PM53A, PM55A).
Resistance
2000, 20.00k,
200.0k, 2MΩ
Diode
Yes
Continuity
Yes
Battery Test
1.5V, 9V
N/A
N/A
N/A
1.5V, 9V
For detailed specifications go to www.Amprobe.eu
15
Pocket Multimeters, PM Series
General Purpose Meters
Three multimeters with innovative features in an ultra-compact size. Simplified interface with
easy one-touch button control, oversize digital display screens.
Turn to this selection of general purpose testers when you need a choice between
analog, compact, digital or unique sizes. These meters are great for the everyday user
or for those occasional measurements you need to make.
Compact size offers a meter that is only .95 cm (.375 in) thick and weighs less than 85 g (3 oz).
Low Z input impedance to eliminate ghost voltages. Hi Z input impedance for electronic circuitry
(PM55A only).
feature detects and displays AC volts, DC volts or resistance
B VolTect™ feature, a built-in AC voltage detector
B Extra features of capacitance, frequency and microamp current
B Option of Hi Z or Low Z input impedance for ghost voltages
B Includes zippered carrying case and protective holster
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
functions/16 ranges
test: Buzzer alert
B Auto power off saves batteries
B Data Hold
B Protective case included
AC voltage detection, VolTect™ feature
B AutoTect™ feature detects and displays AC volts, DC volts or resistance
B Low Z input impedance eliminates ghost voltage readings
B Safety acc. EN 61010, CAT III/300 V, CAT II/450 V
B Continuity
PM51A Pocket size multimeter with frequency & capacitance
B Seven
different measurement functions with 27 full ranges of measurement
B Oversized digital display with large digits and icons
B Safety acc. EN 61010, CAT III/300 V, CAT II/600 V
Frequency
Capacitance
14
AC Voltage
200.0, 600V
400.0m, 4.000, 40.00,
400.0, 600V
3.200, 32.00,
320.0, 600V
50, 150, 300 V
400.0u, 2000uA
DC Current
200 mA
40.00, 400m, 10.00A
N/A
0.5, 10, 250 mA
10.00 Hz - 30.00 kHz
AC Current
N/A
40.00, 400m, 10.00A
N/A
N/A
400.0, 4.000k, 40.00k,
400.0k, 4.000M, 40.00MΩ
320.0, 3.200k, 32.00k,
320.0k, 3.200M,
32.00MΩ
5 k Ω, 500 kΩ
N/A
Yes
For detailed specifications go to www.Amprobe.eu
zero adjust
size
B Safety acc. EN 61010, .
CAT II/300 V
B Compact
2.5, 10, 50, 150,
300 V
100.0n, 1000n, 10.00µ, 100.0µF
0.48mA
FEATURES
B Ohms
320.0m, 3.200, 32.00,
320.0, 600V
600.0, 6.000k, 60.00k, 600.0k, 6.000MΩ
N/A
B High sensitivity taut
band movement
B Five functions/15 ranges
B Battery test
400.0m, 4.000, 40.00,
400.0, 600V
500.0n, 5.000µ, 50.00µ,
500.0µ, 3000µF
0.25mA
AM8C Analog multimeter for the home,
car or workshop
2.000, 20.00,
200.0, 600V
6.000, 60.00, 600.0V
Diode test
B 3200-count display with
analog bargraph
B Safety acc. EN 61010, .
CAT II/300 V
DC Voltage
6.000, 60.00, 450.0V
Non-Contact Voltage
Detection
holster included
acc. EN 61010, CAT II/600 V
AM8B
400.0m, 4.000, 40.00,
400.0, 600V
100 Hz, 1 kHz, and
10 kHz
B Safety
DM78B
PM55A
N/A
B Protective
DM9C
PM53A
400 Hz, 4 kHz, 40 kHz,
400 kHz, and 1 MHz
holster included
acc. EN 61010, CAT II/600 V
DM7C
PM51A
AC/DC uA Current
B Safety
B 5
B Non-contact
400.0, 4.000k, 40.00k,
400.0k, 4.000M, 40.00MΩ
functions/14 ranges
ranges to test batteries
B Industry standard test leads,
safety rated
DM78B Voltage, continuity, diode and
resistance in a credit card size meter
PM53A Pocket size digital multimeter with AutoTect™
Resistance
B Protective
B Special
B High-resolution,
4000-count autoranging
B 7 functions/23 ranges
B Battery Test Function
with Go/NoGo LED indicator
B AutoTect™
Voltage AC/DC
B 6
DM9C Compact autoranging meter
PM55A Automatic Precision Pocket Multimeter
FEATURES
DM7C Compact multimeter
MULTIMETERS
Progressive design with two remarkable features called VolTect™ and AutoTect™. VolTect™
feature is a built-in AC voltage detector. Auto-Tect™ feature is a function that automatically
selects the meter to display between AC volts, DC volts or resistance, depending upon what the
meter senses at the probe tips (PM53A, PM55A).
Resistance
2000, 20.00k,
200.0k, 2MΩ
Diode
Yes
Continuity
Yes
Battery Test
1.5V, 9V
N/A
N/A
N/A
1.5V, 9V
For detailed specifications go to www.Amprobe.eu
15
True RMS Precision Digital Multimeters
Heavy-Duty Multimeters
These "top of the line" digital multimeters are affordable without sacrificing an array of features
and functions. From True RMS to PC Connectivity. Amprobe’s Precision DMMs excel in the
professional environment.
Choose from two heavy-duty digital multimeters that are designed for rugged use with extra
features that make them better suited for field work. They offer extensive protection that will
resist harsh and even abusive environments. Thicker case walls made from specialty plastics
resistant to grease and chemical spills. They include rubber holsters, sealed and gasketed
openings, shock-dampened mountings, extensive fusing and superior protection from
overloads.
AM-140 TRMS, AM-150 TRMS, AM-160 TRMS
Precision TRMS Digital Multimeters with PC Connection
B True
RMS (TRMS)
B AC / DC Voltage, Resistance, AC/DC
Current, Frequency,Capacitance,
and Temperature
B Data Logging (AM-150 only)
B Optical isolated PC interface capability
B MAX, MIN MAX-MIN recording
B Peak hold
B Auto and manual ranging
B Data hold
B Audible and visual warning against
improper plug-in
B Relative
zero mode
B DC Loop Current 4-20mA
B dBm reading with 20 selectable
impedance values
B Backlight display
B Large, easy to read LCD display
B Audible continuity
B “Third hand” - test probe holder
B Safety acc. EN 61010, CAT IV/600 V, .
CAT III/1000 V
B IP67
rated for protection against dust and immersion
proof
B Highest input voltage in any meter to 1500 V DC, 1000 V AC
B Digi-Glo™ backlight (HD160C only)
B Oversized character displays for easy reading
B 30-minute auto power off to preserve battery
B Magne-Grip™ Holster
B Heavy-Duty test leads with threaded alligator clips
B Highest Safety acc. EN 61010, CAT IV/1000 V
B Drop
The HD Series of DMMs is designed for professional use in harsh
environments.
Both meters in the HD line have an extended voltage measurement
capability of 1500 V DC and 1000 V AC, unmatched by any other line of
digital multimeters. The extended voltage ranges can withstand transients
up to 12 kV.
AM-150
AM-140
AM-160
AC Voltage
50.00, 500.0mV, 5.000, 50.00, 500.0,
1000V
500.00m, 5.0000, 50.000, 500.00,
1000.0V
DC Voltage
50.00, 500.0mV, 5.000, 50.00, 500.0,
1000V
500.00m, 5.0000, 50.000, 500.00,
1000.0V
Resistance
50.00, 500.0, 5.000k, 50.00k, 500.0k,
5.000M, 50.00MΩ
500.00, 5.0000k, 50.000k, 500.00k,
5.0000M, 50.000MΩ
500.0µ, 5000µ, 50.00m, 500.0m, 5.000,
10.00A
500.00µ, 5000.0µA, 50.000m, 500.00m,
5.0000, 10.000A
6 Hz to 125 kHz
5.0000 Hz to 200.000kHz
Capacitance
50.00n, 500.0n, 5.000µ, 50.00µ, 500.0µ,
9999µF
50.00n, 500.0n, 5.000µ, 50.00µ, 500.0µ,
9999µF
Temperature
-50 °C to 1000 °C
Current AC/DC
Frequency
Data Recording
N/A
B True-RMS
(TRMS), 10,000-count
Max/Min/AVG, Hold and Range Lock
B Digi-Glo™ backlight
B Temperature, Capacitance and Frequency
B Relative
HD110C General purpose heavy-duty meter
B Data
Hold
HD110C
N/A
0.1% to 99.99%
N/A
FEATURES
OPTIONAL ACCESSORIES
3000 A AC Flexible Clamp-on Attachment
1000 A TRMS AC/DC Clamp-on Attachment
600 A AC/DC Clamp-on Attachment
400 A AC Clamp-on Attachment
Milli-Amps to 30 A AC/DC Clamp-on Attachment
PC Interface kit (PC connection cable with software)
USB to RS-232 Adapter
Carrying Case
16
For detailed specifications go to www.Amprobe.eu
HD160C
Dual thermocouple
-50 °C to 1000 °C
5400 Points
Duty Cycle
MULTIMETERS
FEATURES
HD160C Autoranging True RMS
heavy-duty meter
PART NUMBER
ACF-3000 AK
HD110C
HD160C
DC Voltage
200.0m, 2.000, 20.00, 200.0, 1500 V
1000.0 m, 10.000, 100.00, 1500.0 V
AC Voltage
200.0m, 2.000, 20.00, 200.0, 1000 V
1000.0 m, 10.000, 100.00, 1000.0 V
200.0µ, 2.000m, 20.00m,
200.0m, 2 A
100.00µ, 1000.0µ, 10.000m, 100.00m,
400.0m, 2.000A
200.0, 2.000k, 20.00k, 200.0k,
2.000M, 20.00 MΩ
1000.0, 10.000k, 100.00k, 1000.0k,
10.000M, 40.00MΩ
Current AC/DC
A-1000
CT-600 AC/DC
A400
CT-30
RS-232 KIT1
RS-USB
CC-ACDC
Resistance
Diode
Yes
Continuity
N/A
Yes
Frequency
N/A
100.00, 1000.0, 10.000k, 100.00k,
1000.0k, 10.000MHz
Capacitance
N/A
40.00µf, 400.0µf, 4.000µf, 40.00µf, 400.0µF
Temperature
N/A
-20 °C ~ 1300 °C
For detailed specifications go to www.Amprobe.eu
17
True RMS Precision Digital Multimeters
Heavy-Duty Multimeters
These "top of the line" digital multimeters are affordable without sacrificing an array of features
and functions. From True RMS to PC Connectivity. Amprobe’s Precision DMMs excel in the
professional environment.
Choose from two heavy-duty digital multimeters that are designed for rugged use with extra
features that make them better suited for field work. They offer extensive protection that will
resist harsh and even abusive environments. Thicker case walls made from specialty plastics
resistant to grease and chemical spills. They include rubber holsters, sealed and gasketed
openings, shock-dampened mountings, extensive fusing and superior protection from
overloads.
AM-140 TRMS, AM-150 TRMS, AM-160 TRMS
Precision TRMS Digital Multimeters with PC Connection
B True
RMS (TRMS)
B AC / DC Voltage, Resistance, AC/DC
Current, Frequency,Capacitance,
and Temperature
B Data Logging (AM-150 only)
B Optical isolated PC interface capability
B MAX, MIN MAX-MIN recording
B Peak hold
B Auto and manual ranging
B Data hold
B Audible and visual warning against
improper plug-in
B Relative
zero mode
B DC Loop Current 4-20mA
B dBm reading with 20 selectable
impedance values
B Backlight display
B Large, easy to read LCD display
B Audible continuity
B “Third hand” - test probe holder
B Safety acc. EN 61010, CAT IV/600 V, .
CAT III/1000 V
B IP67
rated for protection against dust and immersion
proof
B Highest input voltage in any meter to 1500 V DC, 1000 V AC
B Digi-Glo™ backlight (HD160C only)
B Oversized character displays for easy reading
B 30-minute auto power off to preserve battery
B Magne-Grip™ Holster
B Heavy-Duty test leads with threaded alligator clips
B Highest Safety acc. EN 61010, CAT IV/1000 V
B Drop
The HD Series of DMMs is designed for professional use in harsh
environments.
Both meters in the HD line have an extended voltage measurement
capability of 1500 V DC and 1000 V AC, unmatched by any other line of
digital multimeters. The extended voltage ranges can withstand transients
up to 12 kV.
AM-150
AM-140
AM-160
AC Voltage
50.00, 500.0mV, 5.000, 50.00, 500.0,
1000V
500.00m, 5.0000, 50.000, 500.00,
1000.0V
DC Voltage
50.00, 500.0mV, 5.000, 50.00, 500.0,
1000V
500.00m, 5.0000, 50.000, 500.00,
1000.0V
Resistance
50.00, 500.0, 5.000k, 50.00k, 500.0k,
5.000M, 50.00MΩ
500.00, 5.0000k, 50.000k, 500.00k,
5.0000M, 50.000MΩ
500.0µ, 5000µ, 50.00m, 500.0m, 5.000,
10.00A
500.00µ, 5000.0µA, 50.000m, 500.00m,
5.0000, 10.000A
6 Hz to 125 kHz
5.0000 Hz to 200.000kHz
Capacitance
50.00n, 500.0n, 5.000µ, 50.00µ, 500.0µ,
9999µF
50.00n, 500.0n, 5.000µ, 50.00µ, 500.0µ,
9999µF
Temperature
-50 °C to 1000 °C
Current AC/DC
Frequency
Data Recording
N/A
B True-RMS
(TRMS), 10,000-count
Max/Min/AVG, Hold and Range Lock
B Digi-Glo™ backlight
B Temperature, Capacitance and Frequency
B Relative
HD110C General purpose heavy-duty meter
B Data
Hold
HD110C
N/A
0.1% to 99.99%
N/A
FEATURES
OPTIONAL ACCESSORIES
3000 A AC Flexible Clamp-on Attachment
1000 A TRMS AC/DC Clamp-on Attachment
600 A AC/DC Clamp-on Attachment
400 A AC Clamp-on Attachment
Milli-Amps to 30 A AC/DC Clamp-on Attachment
PC Interface kit (PC connection cable with software)
USB to RS-232 Adapter
Carrying Case
16
For detailed specifications go to www.Amprobe.eu
HD160C
Dual thermocouple
-50 °C to 1000 °C
5400 Points
Duty Cycle
MULTIMETERS
FEATURES
HD160C Autoranging True RMS
heavy-duty meter
PART NUMBER
ACF-3000 AK
HD110C
HD160C
DC Voltage
200.0m, 2.000, 20.00, 200.0, 1500 V
1000.0 m, 10.000, 100.00, 1500.0 V
AC Voltage
200.0m, 2.000, 20.00, 200.0, 1000 V
1000.0 m, 10.000, 100.00, 1000.0 V
200.0µ, 2.000m, 20.00m,
200.0m, 2 A
100.00µ, 1000.0µ, 10.000m, 100.00m,
400.0m, 2.000A
200.0, 2.000k, 20.00k, 200.0k,
2.000M, 20.00 MΩ
1000.0, 10.000k, 100.00k, 1000.0k,
10.000M, 40.00MΩ
Current AC/DC
A-1000
CT-600 AC/DC
A400
CT-30
RS-232 KIT1
RS-USB
CC-ACDC
Resistance
Diode
Yes
Continuity
N/A
Yes
Frequency
N/A
100.00, 1000.0, 10.000k, 100.00k,
1000.0k, 10.000MHz
Capacitance
N/A
40.00µf, 400.0µf, 4.000µf, 40.00µf, 400.0µF
Temperature
N/A
-20 °C ~ 1300 °C
For detailed specifications go to www.Amprobe.eu
17
Impulse Reflectometer
Advanced Wire Tracers
TDR-400 Impulse Reflectometer
AT-2001, AT-2002, AT-2003, AT-2004, AT-2005
Advanced Wire Tracers
Measuring principle:
The measuring pulse fed into the cable will reflected by in homogeneity of the cable
impedance (cable faults) and showed on the display. The distance and the kind of the fault
can be determined out of the shape and the time setting of the reflection (Practical
experience can be obtained by test measurements). If the cable is terminated with a
resistance equal to the impedance of the cable, no reflexion occurs when the cable is
faultless. In the case of breaks, contact faults in sleeves, short circuits or taps/splitter in the
sector to be tested, the distance to the cable beginning can be determined by the pulse
echo. If wide pulses are used for the measurement, the echoes are stronger, but faultless
taps/splitter cause then strong echoes.
Propagation factor
The Propagation factor (nvp-value) declares the velocity of electrical signals in the cable in
relation to the speed of light. The propagation factor of the cable under test must always
preset before the length measurement. If the propagation factor is unknown, a
approximate value is set and the fault is determined from both ends of the cable.
B Five
models to choose from
live wires buried or hidden
behind walls up to approx. 2.5 m deep
B Performs tests without having to
interrupt power
B Locates and traces wires in walls,
floors, conduit, computer cables, etc.
B Does
not interfere with sensitive electronic
equipment
B Traces unenergized and open (broken) wires
B Locates breakers, neutral & ground lines
B Pinpoints shorts, ground faults &
broken wires
B Traces
FEATURES
AT-2001
AT-2002
AT-2003
AT-2004
AT-2005
9-300V
(S-2300
Transmitter)
9-600V
(S-2600
Transmitter)
N/A
9-600V
(S-2600
Transmitter)
9-600V
(S-2600
Transmitter)
Traces unenergized wires (wire continuity
and wire grounded at the end). Pinpoints
shorts & ground faults.
S-2300
Transmitter &
9V batteries
S-2600
Transmitter &
9V batteries
N/A
S-2600
Transmitter &
9V batteries
S-2600
Transmitter &
9V batteries
Traces unenergized open wires (broken or
disconnected wire). Pinpoints place where
wire is broken.
N/A
N/A
T2200
Transmitter
T2200
Transmitter
T2200
Transmitter
Supplied with Battery. Booster to strengthen
signal for open tracing.
N/A
N/A
NO
YES
YES
Supplied with clamp-on attachment to
inject signal without making a contact with
bare wire.
N/A
N/A
NO
NO
YES
Traces energized wires without power
interruption. Locates breakers without
power interruption.
FEATURES
TDR-400
Measuring range
0 - 2000 m
Resolution
0.25 m, 0.5 m, 1 m, 4 m
KIT CONTAINS:
Accuracy
0.2 % of the measuring range
Receiver R-2000
Propagation factor
0.25 to 0.999
Transmitter S-2300 (9-300V)
Storage places
10 for propagation factor
S-2600 Transmitter 9-600V
Dynamics
44 dB
T-2200 Transmitter for open tracing
Impedance
75 Ohm
Clamp-on Transmitter Accessory A2201CE
Output
F-socket
Rechargeable Battery Pack B2024
Output pulse
4 V/5 ns or 100 ns
Operating
with 3 keys
Display
LCD display, 120 x 32 pixel, illuminated
Power supply
NiMH accumulator 6 V/ 700 mAh (5 x R3),
Power consumption
80 mA
AT-2001
AT-2002
AT-2003
AT-2004
AT-2005
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Battery Pack Recharger B2025
Test leads & accessories
•
•
Reflectometer & WIRE TRACERS
The TDR-400 is a handy, light impulse reflectometer, processor controlled, with
LCD display for check and locate faults in telecommunication and power cables.
Amprobe’s first tier advanced circuit tracer for basic applications where accuracy and routine
troubleshooting are important.
AT-1000 Advanced Tracer
B Trace
energized lines up to
300 VAC or VDC
B Trace unenergized & open conductors
B Identifies breakers and fuses
without powering down
B Locates shorts
B Identifies wires in a bundle
B Identifies control, alarm and
telephone system wiring
B Traces coaxial cable shield
B Receiver range 0.30 to 1 meter .
from a cable being traced
ATGC-1 Ground Coil Accessory
B Traces
and locates buried conductors like
Highway Lighting Conductors, Main Electrical
Feeds, Water Mains, and Telephone Lines
B Eliminates direct connection of transmitter
18
For detailed specifications go to www.Amprobe.eu
B No
access to the conductor required
For detailed specifications go to www.Amprobe.eu
19
Impulse Reflectometer
Advanced Wire Tracers
TDR-400 Impulse Reflectometer
AT-2001, AT-2002, AT-2003, AT-2004, AT-2005
Advanced Wire Tracers
Measuring principle:
The measuring pulse fed into the cable will reflected by in homogeneity of the cable
impedance (cable faults) and showed on the display. The distance and the kind of the fault
can be determined out of the shape and the time setting of the reflection (Practical
experience can be obtained by test measurements). If the cable is terminated with a
resistance equal to the impedance of the cable, no reflexion occurs when the cable is
faultless. In the case of breaks, contact faults in sleeves, short circuits or taps/splitter in the
sector to be tested, the distance to the cable beginning can be determined by the pulse
echo. If wide pulses are used for the measurement, the echoes are stronger, but faultless
taps/splitter cause then strong echoes.
Propagation factor
The Propagation factor (nvp-value) declares the velocity of electrical signals in the cable in
relation to the speed of light. The propagation factor of the cable under test must always
preset before the length measurement. If the propagation factor is unknown, a
approximate value is set and the fault is determined from both ends of the cable.
B Five
models to choose from
live wires buried or hidden
behind walls up to approx. 2.5 m deep
B Performs tests without having to
interrupt power
B Locates and traces wires in walls,
floors, conduit, computer cables, etc.
B Does
not interfere with sensitive electronic
equipment
B Traces unenergized and open (broken) wires
B Locates breakers, neutral & ground lines
B Pinpoints shorts, ground faults &
broken wires
B Traces
FEATURES
AT-2001
AT-2002
AT-2003
AT-2004
AT-2005
9-300V
(S-2300
Transmitter)
9-600V
(S-2600
Transmitter)
N/A
9-600V
(S-2600
Transmitter)
9-600V
(S-2600
Transmitter)
Traces unenergized wires (wire continuity
and wire grounded at the end). Pinpoints
shorts & ground faults.
S-2300
Transmitter &
9V batteries
S-2600
Transmitter &
9V batteries
N/A
S-2600
Transmitter &
9V batteries
S-2600
Transmitter &
9V batteries
Traces unenergized open wires (broken or
disconnected wire). Pinpoints place where
wire is broken.
N/A
N/A
T2200
Transmitter
T2200
Transmitter
T2200
Transmitter
Supplied with Battery. Booster to strengthen
signal for open tracing.
N/A
N/A
NO
YES
YES
Supplied with clamp-on attachment to
inject signal without making a contact with
bare wire.
N/A
N/A
NO
NO
YES
Traces energized wires without power
interruption. Locates breakers without
power interruption.
FEATURES
TDR-400
Measuring range
0 - 2000 m
Resolution
0.25 m, 0.5 m, 1 m, 4 m
KIT CONTAINS:
Accuracy
0.2 % of the measuring range
Receiver R-2000
Propagation factor
0.25 to 0.999
Transmitter S-2300 (9-300V)
Storage places
10 for propagation factor
S-2600 Transmitter 9-600V
Dynamics
44 dB
T-2200 Transmitter for open tracing
Impedance
75 Ohm
Clamp-on Transmitter Accessory A2201CE
Output
F-socket
Rechargeable Battery Pack B2024
Output pulse
4 V/5 ns or 100 ns
Operating
with 3 keys
Display
LCD display, 120 x 32 pixel, illuminated
Power supply
NiMH accumulator 6 V/ 700 mAh (5 x R3),
Power consumption
80 mA
AT-2001
AT-2002
AT-2003
AT-2004
AT-2005
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Battery Pack Recharger B2025
Test leads & accessories
•
•
Reflectometer & WIRE TRACERS
The TDR-400 is a handy, light impulse reflectometer, processor controlled, with
LCD display for check and locate faults in telecommunication and power cables.
Amprobe’s first tier advanced circuit tracer for basic applications where accuracy and routine
troubleshooting are important.
AT-1000 Advanced Tracer
B Trace
energized lines up to
300 VAC or VDC
B Trace unenergized & open conductors
B Identifies breakers and fuses
without powering down
B Locates shorts
B Identifies wires in a bundle
B Identifies control, alarm and
telephone system wiring
B Traces coaxial cable shield
B Receiver range 0.30 to 1 meter .
from a cable being traced
ATGC-1 Ground Coil Accessory
B Traces
and locates buried conductors like
Highway Lighting Conductors, Main Electrical
Feeds, Water Mains, and Telephone Lines
B Eliminates direct connection of transmitter
18
For detailed specifications go to www.Amprobe.eu
B No
access to the conductor required
For detailed specifications go to www.Amprobe.eu
19
Breaker Tracer
Combi Test 2019
Multifunction Installation Tester
ECB50A* Three types of troubleshooting with one tool
Three Testers in one
Identify circuit breaker to
electrical socket
B Trace AC cables in walls
B Sort AC wires in a bundle
B Audible and visual indicators
Includes sensitivity adjustment
Tracing (function fuse) approx. 0...10 cm
B Tracing (function cable) approx. 0...40 cm
B Safety acc. EN 61010, CAT III/300 V
B Socket type UK and Schuko available
B
B
B
B
B For
fast and easy testing of electrical
installations acc. IEC 60364, DIN VDE 0100,
ÖVE E 8001, NIN/NIV, 16th Edition
B Compact, safe and reliable
B Large and clearly arranged 3 1/2 LCD Display
(64 x 64 mm)
B Timer function and limit value adjustment
B Integrated IR RS-232 interface
B Internal memory for 350 measuring values
B Auto power off
B Integrated rubber holster
B Safety: EN 61010, CAT III/600 V
B Low
Ohms measurement with 200 mA DC .
(EN 61557-4)
B Insulation resistance with 50, 100, 250, 500 or
1000 V DC (EN 61557-2)
B Complete RCD testing and analyse function
(EN 61557-6)
B Line and loop impedance and current (Zi, Zs)
(EN 61557-3)
B Display of short circuit curent Ik (EN 61557-3)
B Fault loop impedace without RCD tripping
B Phase sequence measurement (EN 61557-7)
BREAKER TRACER & Multifunction Installation testers
The ECB50A* is a microprocessor driven tracer that allows three types of troubleshooting: circuit
breaker identification, wire tracing in walls, and wire sorting. The included transmitter module
generates a custom coded signal that is injected into a powered AC line. The microprocessorenabled receiver wand uses this encoded signal to reject noise and correctly identify the right
circuit breaker or wire.
*ECB50A-FGIS Euro connector version. ECB50A-E UK connector version.
FEATURES
SPECS
Transmitter Voltage range
100 V to 250 VAC
Frequency range
50 to 60 Hz
Function
Range
Resolution
Low ohms measurement
0,01 ÷ 19,99 Ω
0,01 Ω
19,99 ÷ 99,99 Ω
0,1 Ω
0,01 MΩ ÷ 19,99 MΩ
0,01 MΩ
20 MΩ ÷ 199 MΩ
0,1 MΩ
200 MΩ ÷ 1999 MΩ
1 MΩ
adjustable test current I∆N:
10, 30, 100, 300, 500 mA
1 ms
Insulation measurement 50 V, 100 V,
250 V, 500 V and 1000 V DC
FI (RCD) tripping time
Multifunction Installation Testers
tripping time (max. Range)
0 ÷ 9,99 Ω
Genius 5035
Multifunction Installation Tester
FI RCD) tripping current
(0,5 ÷ 2,0) x I∆N
10 % I∆N
FI (RCD) Ra
0 ÷ 2 kΩ/Itest =1/2 I∆N
1Ω
FI (RCD) Ub
25 or 50 V touch current
1V
Genius 5035 is a multifunction tester for installation testing acc. to IEC 60364, DIN VDE
0100, ÖVE E 8001, NIN/NIV, 16th Edition. With the Genius multifunction installation tester
you can perform following measurements:
Line/Loop impedance (Zs, Zi)
0,01 ÷ 19,99 Ω
0,01 Ω
20,00 ÷ 199,9 Ω
0,1 Ω
200,0 ÷ 2000 Ω
1Ω
resistance EN 61557-2 100 V, 250 V,
B Measurement of earth resistance EN 61557-5
500 V, 1000 V DC
without causing RCD tripping
B Line and loop impedance EN 61557-3 and .
B Phase Rotation EN 61557-7
prospective short circuit current
B Frequency and Voltage Measurement
B Low resistance measurement EN 61557-4 .
with > 200 mA DC
B RCD-Analysis EN 61557-6 .
Measurement of tripping time, tripping currrent,
touch leakage voltage Ub with and without RCD
tripping
Test current Itest 0 4 A (80 ms) at 110 V, 6 A (40 ms) at 230 V, 11 A (40 ms) at
400 V
B Insulation
For detailed specifications, see table GSC 53A on page 34 and 35
20
For detailed specifications go to www.Amprobe.eu
Short circuit current Ik
1 A ... 1 kA ... 10 kA
1 A and 1 kA
Loop impedance without RCD
tripping
1 ÷ 1999 Ω
1Ω
Frequency measurement
15,3 ÷ 99,9 Hz
0,1 Hz
Phase sequence and voltage
measurement
110 ÷ 440 V
1V
RS 232 interface
optoinsulated serial output
Memory locations
350
Power supply
6 x 1,5 V Type AA for appr. 500 insulation measurements
Weight
appr. 990 g
Auto off
10 min
Safety class, standards
EN 61010-1, CAT III 600 V, all measurements according to
VDE 0413 (EN 61557) part 1, 2, 3, 4, 6 and 7
Standard accessories
incl. carrying case, test leads with Shuko plugs, 3 alligator clips, 3 safety-test
leads with banana jack, software (Eurolink 2000), memory, RS232 cable,
manual, calibration certificate and batteries.
For detailed specifications go to www.Amprobe.eu
21
Breaker Tracer
Combi Test 2019
Multifunction Installation Tester
ECB50A* Three types of troubleshooting with one tool
Three Testers in one
Identify circuit breaker to
electrical socket
B Trace AC cables in walls
B Sort AC wires in a bundle
B Audible and visual indicators
Includes sensitivity adjustment
Tracing (function fuse) approx. 0...10 cm
B Tracing (function cable) approx. 0...40 cm
B Safety acc. EN 61010, CAT III/300 V
B Socket type UK and Schuko available
B
B
B
B
B For
fast and easy testing of electrical
installations acc. IEC 60364, DIN VDE 0100,
ÖVE E 8001, NIN/NIV, 16th Edition
B Compact, safe and reliable
B Large and clearly arranged 3 1/2 LCD Display
(64 x 64 mm)
B Timer function and limit value adjustment
B Integrated IR RS-232 interface
B Internal memory for 350 measuring values
B Auto power off
B Integrated rubber holster
B Safety: EN 61010, CAT III/600 V
B Low
Ohms measurement with 200 mA DC .
(EN 61557-4)
B Insulation resistance with 50, 100, 250, 500 or
1000 V DC (EN 61557-2)
B Complete RCD testing and analyse function
(EN 61557-6)
B Line and loop impedance and current (Zi, Zs)
(EN 61557-3)
B Display of short circuit curent Ik (EN 61557-3)
B Fault loop impedace without RCD tripping
B Phase sequence measurement (EN 61557-7)
BREAKER TRACER & Multifunction Installation testers
The ECB50A* is a microprocessor driven tracer that allows three types of troubleshooting: circuit
breaker identification, wire tracing in walls, and wire sorting. The included transmitter module
generates a custom coded signal that is injected into a powered AC line. The microprocessorenabled receiver wand uses this encoded signal to reject noise and correctly identify the right
circuit breaker or wire.
*ECB50A-FGIS Euro connector version. ECB50A-E UK connector version.
FEATURES
SPECS
Transmitter Voltage range
100 V to 250 VAC
Frequency range
50 to 60 Hz
Function
Range
Resolution
Low ohms measurement
0,01 ÷ 19,99 Ω
0,01 Ω
19,99 ÷ 99,99 Ω
0,1 Ω
0,01 MΩ ÷ 19,99 MΩ
0,01 MΩ
20 MΩ ÷ 199 MΩ
0,1 MΩ
200 MΩ ÷ 1999 MΩ
1 MΩ
adjustable test current I∆N:
10, 30, 100, 300, 500 mA
1 ms
Insulation measurement 50 V, 100 V,
250 V, 500 V and 1000 V DC
FI (RCD) tripping time
Multifunction Installation Testers
tripping time (max. Range)
0 ÷ 9,99 Ω
Genius 5035
Multifunction Installation Tester
FI RCD) tripping current
(0,5 ÷ 2,0) x I∆N
10 % I∆N
FI (RCD) Ra
0 ÷ 2 kΩ/Itest =1/2 I∆N
1Ω
FI (RCD) Ub
25 or 50 V touch current
1V
Genius 5035 is a multifunction tester for installation testing acc. to IEC 60364, DIN VDE
0100, ÖVE E 8001, NIN/NIV, 16th Edition. With the Genius multifunction installation tester
you can perform following measurements:
Line/Loop impedance (Zs, Zi)
0,01 ÷ 19,99 Ω
0,01 Ω
20,00 ÷ 199,9 Ω
0,1 Ω
200,0 ÷ 2000 Ω
1Ω
resistance EN 61557-2 100 V, 250 V,
B Measurement of earth resistance EN 61557-5
500 V, 1000 V DC
without causing RCD tripping
B Line and loop impedance EN 61557-3 and .
B Phase Rotation EN 61557-7
prospective short circuit current
B Frequency and Voltage Measurement
B Low resistance measurement EN 61557-4 .
with > 200 mA DC
B RCD-Analysis EN 61557-6 .
Measurement of tripping time, tripping currrent,
touch leakage voltage Ub with and without RCD
tripping
Test current Itest 0 4 A (80 ms) at 110 V, 6 A (40 ms) at 230 V, 11 A (40 ms) at
400 V
B Insulation
For detailed specifications, see table GSC 53A on page 34 and 35
20
For detailed specifications go to www.Amprobe.eu
Short circuit current Ik
1 A ... 1 kA ... 10 kA
1 A and 1 kA
Loop impedance without RCD
tripping
1 ÷ 1999 Ω
1Ω
Frequency measurement
15,3 ÷ 99,9 Hz
0,1 Hz
Phase sequence and voltage
measurement
110 ÷ 440 V
1V
RS 232 interface
optoinsulated serial output
Memory locations
350
Power supply
6 x 1,5 V Type AA for appr. 500 insulation measurements
Weight
appr. 990 g
Auto off
10 min
Safety class, standards
EN 61010-1, CAT III 600 V, all measurements according to
VDE 0413 (EN 61557) part 1, 2, 3, 4, 6 and 7
Standard accessories
incl. carrying case, test leads with Shuko plugs, 3 alligator clips, 3 safety-test
leads with banana jack, software (Eurolink 2000), memory, RS232 cable,
manual, calibration certificate and batteries.
For detailed specifications go to www.Amprobe.eu
21
TELARIS 0100-PLUS
Multifunction Installation Tester
resistance measurement up to 265 V
resistance measurement up to 440 V
B Prospective short circuit current measurement
B RCD measurements (contact voltage, trip time,
trip current - ramp method)
B Low Ohm measurement
B Insulation measurement with 100, 250, 500 V
B Voltage and frequency measurement
B Rotary field test
B Integrated memory for approx. 500
measurement values
B Standard, built-in IR RS-232 interface for
transferring measurement data to the PC
B Line
B Software
es control for recording test results
is available as option
B Integrated socket test with contact electrode
to enable the user to quickly establish
incorrectly installed sockets and/or protective
conductor failures
B Clear and large LCD providing the user with
an optimum visual indication of both test
values and limits
B Auto power off
B Measurement of loop resistance and
prospective short circuit current measurement
without tripping the RCD
TELARIS RCD-TEST
RCD Analyser
B Swift
and easy test of RCDs (also time delayed
types)
B Measurement of contact voltage without
tripping the RCD
B Measurements of trip time and trip current
– ramp method
B RCD analysis for test of all RCD parameters
B Display of earth resistance
B Integrated memory for approx. 100
measurement values
B Standard, built-in IR/RS-232 interface for
transferring measurement data to the PC
B Software es control for recording test results is
available as option
B Curve
shape to be selected for RCDs of Type
AC, A, B
B Test current for pre-selection x 0.5 / x 1 / x 2
and x 5
B Integrated socket test with contact electrode
to enable the user to quickly establish
incorrectly installed sockets and/or protective
conductor failures
B Clear and large LCD providing the user with
an optimum visual indication of both test
values and limits
B Auto power off
Installation testers & RCD ANALYZER
B Loop
RCD Analyser
FEATURES
Display
LCD, 3½-digit, 1999 Digits
Measurement Ranges
Resolution
Voltage
1...440 V
1V AC/DC
FEATURES
TELARIS RCD-TEST
Frequency
10...99,9 Hz
0,1 Hz
Display
3½ digit, LCD, 1999 Digits Measurement ranges /
Resolution
Loop Impedance
0,15…19,99./199,9/1999 Ω
0,01/0,1/1 Ω
Nominal test current
0,10 A...1,7 kA
195...264 V 50/60 Hz
approx. 4,6 A (at 230 V)
0,15…19,99Ω/199,9/1999 Ω
0,01A...0,1 kA
10 / 30 / 100 / 300 / 500mA/ 1 A
time delayed: 100mA/ 300mA/ 500 mA / 1 A
Contact voltage
0.6...70 V / 0.1 V
Tolerance
(-0%...+10%) + 6 Digits
Trip time
2...1999 ms / 1 ms
Tolerance
±(2%+2 Digits)
Test current type
AC, DC, DC pulse
Earth resistance
0.01...1999 Ω / 1 Ω
Tolerance
±(10%+10 Digits)
Mains voltage
230 V +10% / -15%
Data memory
approx. 100 measurements
Interface
IR/RS-232 interface-adapter
Protection class
II (double insulated)
Safety complying with
IEC61010/EN61010/DIN VDE 0411
IEC61557/EN61557/DIN VDE 0413
Measurement category
CAT III / 300 V
Pollution degree
2
Protection degree
IP 50
Power supply
6 x 1.5 V, IEC LR6
Prospective Short Circuit Current
Input Voltage Range
Test Current Line Resistance
Prospective Short
Circuit Current
Input Voltage Range
Test Current
Loop Resistance (without tripping the RCD)
Prospective Short
Circuit Current
Input Voltage Range
Test Current
Insulation Resistance
Test Voltage
Low Ohm Measurement
Test Current
RCD-Test Nominal
currents
selective:
Measurement
Functions
Contact Voltage
Earth Resistance
Tripping Time
Tripping Current
Rotary Field Test
Input Voltage Range
Data memory
Interface
Safety complying with
Measurement category
Pollution Degree
Protection Degree
Power Supply
22
For detailed specifications go to www.Amprobe.eu
0,10 A...2,7 kA
195...440 V 50/60 Hz
approx. 4,6 A (at 230 V)
0,5...19,99Ω/199,9/1999 Ω
0,50 A...0,5 kA
195...264 V 50/60 Hz
approx. 5 mA (at 230 V)
0,05...19,99/199,9 MΩ
100, 250, 500 V DC
0,05...19,99/199,9/1999 Ω
> 200 mA DC
10, 30, 100, 300, 500mA
0,5 x 30mA, 5 x 30mA
100, 300, 500mA
Contact voltage,
trip time, Tripping current test with
ramp method
1...63 V
10…1999 Ω/19,99 kΩ
1...500 ms
40...140% of I∆N (in 10% steps)
0,01/0,1/1 Ω
0,01A...0,1 kA
0,01/0,1/1Ω
0,01A...0,1kA
0,01/0,1 MΩ
0,01/0,1/1 Ω
1 Ω/0,01 kΩ
1 ms
100...440 V 50/60 Hz
approx. 500 values
IR-RS-232
IEC61010, EN61010, DIN VDE 0411/
IEC61557, EN61557, DIN VDE 0413
CAT III/440V
2
IP 40
6 x 1,5 V, IEC LR6
For detailed specifications go to www.Amprobe.eu
23
TELARIS 0100-PLUS
Multifunction Installation Tester
resistance measurement up to 265 V
resistance measurement up to 440 V
B Prospective short circuit current measurement
B RCD measurements (contact voltage, trip time,
trip current - ramp method)
B Low Ohm measurement
B Insulation measurement with 100, 250, 500 V
B Voltage and frequency measurement
B Rotary field test
B Integrated memory for approx. 500
measurement values
B Standard, built-in IR RS-232 interface for
transferring measurement data to the PC
B Line
B Software
es control for recording test results
is available as option
B Integrated socket test with contact electrode
to enable the user to quickly establish
incorrectly installed sockets and/or protective
conductor failures
B Clear and large LCD providing the user with
an optimum visual indication of both test
values and limits
B Auto power off
B Measurement of loop resistance and
prospective short circuit current measurement
without tripping the RCD
TELARIS RCD-TEST
RCD Analyser
B Swift
and easy test of RCDs (also time delayed
types)
B Measurement of contact voltage without
tripping the RCD
B Measurements of trip time and trip current
– ramp method
B RCD analysis for test of all RCD parameters
B Display of earth resistance
B Integrated memory for approx. 100
measurement values
B Standard, built-in IR/RS-232 interface for
transferring measurement data to the PC
B Software es control for recording test results is
available as option
B Curve
shape to be selected for RCDs of Type
AC, A, B
B Test current for pre-selection x 0.5 / x 1 / x 2
and x 5
B Integrated socket test with contact electrode
to enable the user to quickly establish
incorrectly installed sockets and/or protective
conductor failures
B Clear and large LCD providing the user with
an optimum visual indication of both test
values and limits
B Auto power off
Installation testers & RCD ANALYZER
B Loop
RCD Analyser
FEATURES
Display
LCD, 3½-digit, 1999 Digits
Measurement Ranges
Resolution
Voltage
1...440 V
1V AC/DC
FEATURES
TELARIS RCD-TEST
Frequency
10...99,9 Hz
0,1 Hz
Display
3½ digit, LCD, 1999 Digits Measurement ranges /
Resolution
Loop Impedance
0,15…19,99./199,9/1999 Ω
0,01/0,1/1 Ω
Nominal test current
0,10 A...1,7 kA
195...264 V 50/60 Hz
approx. 4,6 A (at 230 V)
0,15…19,99Ω/199,9/1999 Ω
0,01A...0,1 kA
10 / 30 / 100 / 300 / 500mA/ 1 A
time delayed: 100mA/ 300mA/ 500 mA / 1 A
Contact voltage
0.6...70 V / 0.1 V
Tolerance
(-0%...+10%) + 6 Digits
Trip time
2...1999 ms / 1 ms
Tolerance
±(2%+2 Digits)
Test current type
AC, DC, DC pulse
Earth resistance
0.01...1999 Ω / 1 Ω
Tolerance
±(10%+10 Digits)
Mains voltage
230 V +10% / -15%
Data memory
approx. 100 measurements
Interface
IR/RS-232 interface-adapter
Protection class
II (double insulated)
Safety complying with
IEC61010/EN61010/DIN VDE 0411
IEC61557/EN61557/DIN VDE 0413
Measurement category
CAT III / 300 V
Pollution degree
2
Protection degree
IP 50
Power supply
6 x 1.5 V, IEC LR6
Prospective Short Circuit Current
Input Voltage Range
Test Current Line Resistance
Prospective Short
Circuit Current
Input Voltage Range
Test Current
Loop Resistance (without tripping the RCD)
Prospective Short
Circuit Current
Input Voltage Range
Test Current
Insulation Resistance
Test Voltage
Low Ohm Measurement
Test Current
RCD-Test Nominal
currents
selective:
Measurement
Functions
Contact Voltage
Earth Resistance
Tripping Time
Tripping Current
Rotary Field Test
Input Voltage Range
Data memory
Interface
Safety complying with
Measurement category
Pollution Degree
Protection Degree
Power Supply
22
For detailed specifications go to www.Amprobe.eu
0,10 A...2,7 kA
195...440 V 50/60 Hz
approx. 4,6 A (at 230 V)
0,5...19,99Ω/199,9/1999 Ω
0,50 A...0,5 kA
195...264 V 50/60 Hz
approx. 5 mA (at 230 V)
0,05...19,99/199,9 MΩ
100, 250, 500 V DC
0,05...19,99/199,9/1999 Ω
> 200 mA DC
10, 30, 100, 300, 500mA
0,5 x 30mA, 5 x 30mA
100, 300, 500mA
Contact voltage,
trip time, Tripping current test with
ramp method
1...63 V
10…1999 Ω/19,99 kΩ
1...500 ms
40...140% of I∆N (in 10% steps)
0,01/0,1/1 Ω
0,01A...0,1 kA
0,01/0,1/1Ω
0,01A...0,1kA
0,01/0,1 MΩ
0,01/0,1/1 Ω
1 Ω/0,01 kΩ
1 ms
100...440 V 50/60 Hz
approx. 500 values
IR-RS-232
IEC61010, EN61010, DIN VDE 0411/
IEC61557, EN61557, DIN VDE 0413
CAT III/440V
2
IP 40
6 x 1,5 V, IEC LR6
For detailed specifications go to www.Amprobe.eu
23
Loop Resistance Tester
Insulation Resistance Testers
Model AMB-45 and AMB-25 have three selectable test voltages testing insulation, plus the
AMB-45 has a built-in voltmeter and programmable timer and internal memory of 99 data points.
B Measurement
of loop resistance and prospective
short circuit current measurement without
tripping the RCD
B Line resistance and prospective short circuit
current measurement
B Enables the user to measure each conductor
resistance independently: PE resistance, phase
resistance and neutral resistance
B Voltage and frequency measurement
B Integrated memory for approx. 250
measurement values
B Standard, built-in IR/RS-232 interface for
transferring measurement data to the PC
B Software es control for recording test results is
available as option
B Integrated
socket test with contact
electrode to enable the user to quickly
establish incorrectly installed sockets and/or
protective conductor failures
B Pre-selection of max. admissible contact
voltage
B Clear and large LCD providing the user with
an optimum visual indication of both test
values and limits
B Auto power off
B Patented measurement principle of loop
resistance and prospective short circuit
current measurement without tripping the
RCD
AMB-45 Digital Insulation Resistance Tester
B Tests insulation of wires, cables,
transformers and motors
B Comes as a complete kit including test
leads & PC software
B Three selectable test voltages up to 1000V
B Built in voltmeter
B Sensitive Ohmmeter for checking
resistance of motor windings
AMB-25 Digital Insulation Resistance Tester
B Test insulation of wires, cables,
transformers and motors
B Selectable test voltages up to 1000V
B Button Lock for Dielectric
Absorption Ratio Test
B Sensitive Ohmmeter for checking
resistance of motor windings
24
FEATURES
TELARIS LOOP-TEST
Display
3½ digit; LCD; 1999 Digits Measurement range / Resolution / Tolerance
Loop impedance
0.05...1999Ω/0.01...1Ω/±(5%rdg.+5 Digits)
Line resistance
0.05...19.99Ω/ 0.01/±(5% rdg.+ 5 Digits)
Resistance neutral connector
0.05...19.99Ω/0.01/±(5% rdg.+ 5 Digits)
Resistance earth connector
0.05...1999Ω/0.01...1Ω/±(5%rdg.+5Digits)
Resistance phase connector
0.05...19.99Ω/0.01/±(5% rdg.+ 5 Digits)
Prospective short
circuit current
1 A...4.6 kA / 1 A,10 A
Voltage
0...300 V / 1 V /±(3% rdg.+3 Digits)
Mains frequency
10...200 Hz/0.1 Hz/±(1% rdg.+ 2 Digits)
Contact voltage
25 V / 50 V (selectable)
Data memory approx.
250 Meas. values
Interface
IR / RS-232 interface-adapter
Protection class
II (double insulated)
Safety complying with I
EC61010/EN61010/ DIN VDE 0411
IEC61557/EN61557/DIN VDE 0413
Measurement category
CAT III / 300 V
Pollution degree
2
Protection degree
IP 50
Power supply
1 x 9 V, IEC 6LR61
For detailed specifications go to www.Amprobe.eu
B Programmable timer to perform
the Dielectric Absorption Ratio Test
B Internal memory, 99 datapoints
B Data download to PC
B Safety acc. EN 61010, CAT III/600 V
FEATURES
Loop resistance & Insulation Testers
TELARIS LOOP-TEST
Loop Resistance Tester
B Internal
memory (stores 9 readings)
as a complete kit
including test leads
B Safety acc. EN 61010, CAT III/600 V
B Comes
AMB-45
AMB-25
Insulation resistance (250 VDC)
4.000, 40.00, 400.0, 4000MΩ
40.00, 400.0MΩ
Insulation resistance (500 VDC)
4.000, 40.00, 400.0, 4000MΩ
400.0, 1000.0MΩ
Insulation resistance (1000 VDC)
4.000, 40.00, 400.0, 4000MΩ
400.0, 2000.0MΩ
Resistance (9V)
N/A
999.9 Ω
Low Resistance
400.0, 4000 Ω
N/A
Voltage AC/DC
600.0V
N/A
TELARIS ISO-PRO
Insulation Tester
B Insulation
measurement
Ohm measurement
B Voltage measurement
B Integrated memory for approx. 500 measurement
values
B Standard, built-in IR RS-232 interface for
transferring measurement data to the PC
B Software es control for recording test results is
available as option
B Pre-setable limit values for insulation
measurement
B Test lead compensation function for exact zero
adjustment
B Additional analogue bargraph for insulation
measurement
B Low
B Clear
and large LCD providing the user with
an optimum visual indication of both test
values and limits
B Backlight
B Auto power off
B Adjustable measurement value timer allows
measurements over a longer time period
B Test of trip voltage of overvoltage
protection devices
B Insulation measurement of floor and wall
resistance
For detailed specifications go to www.Amprobe.eu
25
Loop Resistance Tester
Insulation Resistance Testers
Model AMB-45 and AMB-25 have three selectable test voltages testing insulation, plus the
AMB-45 has a built-in voltmeter and programmable timer and internal memory of 99 data points.
B Measurement
of loop resistance and prospective
short circuit current measurement without
tripping the RCD
B Line resistance and prospective short circuit
current measurement
B Enables the user to measure each conductor
resistance independently: PE resistance, phase
resistance and neutral resistance
B Voltage and frequency measurement
B Integrated memory for approx. 250
measurement values
B Standard, built-in IR/RS-232 interface for
transferring measurement data to the PC
B Software es control for recording test results is
available as option
B Integrated
socket test with contact
electrode to enable the user to quickly
establish incorrectly installed sockets and/or
protective conductor failures
B Pre-selection of max. admissible contact
voltage
B Clear and large LCD providing the user with
an optimum visual indication of both test
values and limits
B Auto power off
B Patented measurement principle of loop
resistance and prospective short circuit
current measurement without tripping the
RCD
AMB-45 Digital Insulation Resistance Tester
B Tests insulation of wires, cables,
transformers and motors
B Comes as a complete kit including test
leads & PC software
B Three selectable test voltages up to 1000V
B Built in voltmeter
B Sensitive Ohmmeter for checking
resistance of motor windings
AMB-25 Digital Insulation Resistance Tester
B Test insulation of wires, cables,
transformers and motors
B Selectable test voltages up to 1000V
B Button Lock for Dielectric
Absorption Ratio Test
B Sensitive Ohmmeter for checking
resistance of motor windings
24
FEATURES
TELARIS LOOP-TEST
Display
3½ digit; LCD; 1999 Digits Measurement range / Resolution / Tolerance
Loop impedance
0.05...1999Ω/0.01...1Ω/±(5%rdg.+5 Digits)
Line resistance
0.05...19.99Ω/ 0.01/±(5% rdg.+ 5 Digits)
Resistance neutral connector
0.05...19.99Ω/0.01/±(5% rdg.+ 5 Digits)
Resistance earth connector
0.05...1999Ω/0.01...1Ω/±(5%rdg.+5Digits)
Resistance phase connector
0.05...19.99Ω/0.01/±(5% rdg.+ 5 Digits)
Prospective short
circuit current
1 A...4.6 kA / 1 A,10 A
Voltage
0...300 V / 1 V /±(3% rdg.+3 Digits)
Mains frequency
10...200 Hz/0.1 Hz/±(1% rdg.+ 2 Digits)
Contact voltage
25 V / 50 V (selectable)
Data memory approx.
250 Meas. values
Interface
IR / RS-232 interface-adapter
Protection class
II (double insulated)
Safety complying with I
EC61010/EN61010/ DIN VDE 0411
IEC61557/EN61557/DIN VDE 0413
Measurement category
CAT III / 300 V
Pollution degree
2
Protection degree
IP 50
Power supply
1 x 9 V, IEC 6LR61
For detailed specifications go to www.Amprobe.eu
B Programmable timer to perform
the Dielectric Absorption Ratio Test
B Internal memory, 99 datapoints
B Data download to PC
B Safety acc. EN 61010, CAT III/600 V
FEATURES
Loop resistance & Insulation Testers
TELARIS LOOP-TEST
Loop Resistance Tester
B Internal
memory (stores 9 readings)
as a complete kit
including test leads
B Safety acc. EN 61010, CAT III/600 V
B Comes
AMB-45
AMB-25
Insulation resistance (250 VDC)
4.000, 40.00, 400.0, 4000MΩ
40.00, 400.0MΩ
Insulation resistance (500 VDC)
4.000, 40.00, 400.0, 4000MΩ
400.0, 1000.0MΩ
Insulation resistance (1000 VDC)
4.000, 40.00, 400.0, 4000MΩ
400.0, 2000.0MΩ
Resistance (9V)
N/A
999.9 Ω
Low Resistance
400.0, 4000 Ω
N/A
Voltage AC/DC
600.0V
N/A
TELARIS ISO-PRO
Insulation Tester
B Insulation
measurement
Ohm measurement
B Voltage measurement
B Integrated memory for approx. 500 measurement
values
B Standard, built-in IR RS-232 interface for
transferring measurement data to the PC
B Software es control for recording test results is
available as option
B Pre-setable limit values for insulation
measurement
B Test lead compensation function for exact zero
adjustment
B Additional analogue bargraph for insulation
measurement
B Low
B Clear
and large LCD providing the user with
an optimum visual indication of both test
values and limits
B Backlight
B Auto power off
B Adjustable measurement value timer allows
measurements over a longer time period
B Test of trip voltage of overvoltage
protection devices
B Insulation measurement of floor and wall
resistance
For detailed specifications go to www.Amprobe.eu
25
TELARIS ISO-PRO
Display
LCD, 3½ digit, 1999 Digits with Bargraph Measurement range / Resolution
Insulation resistance
0.005...1.999 MΩ / 1 kΩ
2...19.99 MΩ/10 kΩ, 20...199.9 MΩ / 100 kΩ, 200...1999 MΩ/1MΩ
Test voltage
100/250/500/1000 V DC
Voltage
0...500 V AC/DC/1 V
Timer function
0, 10, 30, 180 s (selectable)
Voltage Protection level
10...1000 V DC
6...625 V AC / 0…1000 V DC
Test current
approx. 1mA
Low Ohm measurement
0.03...19.99 Ω/0.01 Ω
Test current
> 200mA
Memory
approx. 500 Values
Interface
IR/RS-232 Interface adapter
Safety complying with
IEC 61010/EN 61010/
DIN VDE 0411/IEC 61557/EN61557/DIN VDE 0413
Measurement category
CAT III/600 V
Pollution Degree
2
Protection Degree
IP 50
Power Supply
6 x 1.5 V, IEC LR6
ISO-PLUS-A
Insulation Tester & TRMS Multimeter
Universal insulation measuring instruments for testing electrical equipment, devices, cables,
machines in electrical workshops and industry.
to use handheld design measuring V, Ω, MΩ, Hz, A (mA)
dual display with bright EL backlight and bargraph
B Advanced safety features including live circuit protection without fuse damage, test lock out and
auto discharge after test
B Fully compliant with all European standards for insulation testing
B Insulation measurements up to 20 GΩ with 100, 250, 500 and 1000V test voltages and display of
test current
B On screen display of Polarisation Index and Dielectric Absorption Ratio for insulation quality
B Auto ranging resistance measurement to 200kΩ with a selectable 200mA or 50mA low resistance
test lead compensation
B Continuity test with adjustable thresholds, fast-responding buzzer and visual indicator (buzzer
can also be de-activated)
B True RMS voltage measurement with display of AC, DC and AC+DC values and mV resolution
B Leakage current measurement directly or with LEM current probes in current ranges from 200
μA to 200A
B LIMIT (adjustable alarm) to quickly and reliably identify fault conditions
B REC function for MIN, MAX, AVG values
B ZERO (REL) function to compensate measuring leads and for relative measurements
B Safety acc. EN 61557-2, -4, EN 61010, CAT III / 600V
B Easy
B Large
5000V Insulation Testers
Rugged design for 5000 Volt applications but delicate features to ensure proper testing and
recording of insulation measurements. Both the AMB-5KVD and AMB-5KV offer a built-in
voltmeter. The AMB-5KVD goes further with numerous test voltage increments for testing
insulation as well as internal memory and programmability.
AMB-5KVD
Digital 5 kV Insulation Resistance Tester
B Tests insulation of wires, cables,
transformers, motors and generators
B Comes as a complete kit including
test leads and PC software
B Built in automatic voltmeter up to
5000V warns against hazardous
energized systems
B Programmable setups of test
voltages and timers
B Performs the dielectric absorption
ratio test
B One testing instrument for low
and high voltage systems
B Internal memory, measurements
can be stored for future reference
B Data download to PC
B Rugged, durable case
AMB-5KV
Analog 5 kV Insulation Resistance Tester
B Tests insulation of wires, cables,
transformers, motors and generators
B Test voltages 500, 1000, 2500, 5000 VDC
B Measuring range 500K thru 500G ohms
B Built-in voltmeter 0 – 600Volts
FEATURES
B Lock feature applies testing voltage
continuously for Dielectric
Absorption Ratio Test
B Automatic discharge of
equipment capacitance for
operator safety
AMB-5KVD
AMB-5KV
Insulation resistance (500 VDC)
100 k to 100 GΩ
500 k to 100 GΩ
Insulation resistance (1000 VDC)
100 k to 250 GΩ
500 k to 250 GΩ
Insulation resistance (250 VDC)
100 k to 500 GΩ
500 k to 500 GΩ
Insulation resistance (5000 VDC)
100 k to 500 GΩ
500 k to 500 GΩ
500, 5000 V
600.0 V
Voltage AC/DC
Insulation Testers
FEATURES
General
Display
1999 digit dual LCD with special symbols, digit height 17 mm, 30 segment analogue
bar with over/ underflow and special display symbols, EL backlight
Protective type
IP40 according to EN 60529
External voltage
Measurement inhibited for external voltage Ux >10% of UN for MΩ and >3V for Ω
Max. overload
800 V eff RMS or RMS x frequency < 5x104 VHz
Auxiliary power
4 x 1.5 V mignon cells alkali-manganese(IEC LR6)
MΩ - RISO Insulation Resistance
Method
Voltage/current measurement as per EN 61557–2
Nominal test voltage
UN = 100V, 250V, 500V, 1000V DC
Open circuit voltage
U0 < 1.1 x UN
Nominal current
IN ≥ 1mA DC at UN IN ≥ 2.5mA DC at 100kΩ at 250V
Short circuit current
<10mA DC
R – Low Resistance Measurement
26
Method
Voltage/current measurement as per EN 61557–4
Open circuit voltage
U0 ≥ 4V
Short circuit current
Ik ≥ 200mA DC up to 2Ω as per IEC 61557
For detailed specifications go to www.Amprobe.eu
Download Suite Software Package
Download Suite is a software package compatible with the Amprobe instruments with download le
Do
ib
wn
at
capabilities.
load
mp
o
C
Suite
- Install software once and use it with various Amprobe products
- Download Suite features one installation and download package for all supported Amprobe Products - One file format - all instruments share the same file format. You can open files recorded by you, other people, or even
other Amprobe instruments right on your PC
- Download Suite automatically checks your version for upgrades and keeps your version current.
The software es control support the following products:
• AMB-45
• AMB-5KVD
Available in English only.
For detailed specifications go to www.Amprobe.eu
27
TELARIS ISO-PRO
Display
LCD, 3½ digit, 1999 Digits with Bargraph Measurement range / Resolution
Insulation resistance
0.005...1.999 MΩ / 1 kΩ
2...19.99 MΩ/10 kΩ, 20...199.9 MΩ / 100 kΩ, 200...1999 MΩ/1MΩ
Test voltage
100/250/500/1000 V DC
Voltage
0...500 V AC/DC/1 V
Timer function
0, 10, 30, 180 s (selectable)
Voltage Protection level
10...1000 V DC
6...625 V AC / 0…1000 V DC
Test current
approx. 1mA
Low Ohm measurement
0.03...19.99 Ω/0.01 Ω
Test current
> 200mA
Memory
approx. 500 Values
Interface
IR/RS-232 Interface adapter
Safety complying with
IEC 61010/EN 61010/
DIN VDE 0411/IEC 61557/EN61557/DIN VDE 0413
Measurement category
CAT III/600 V
Pollution Degree
2
Protection Degree
IP 50
Power Supply
6 x 1.5 V, IEC LR6
ISO-PLUS-A
Insulation Tester & TRMS Multimeter
Universal insulation measuring instruments for testing electrical equipment, devices, cables,
machines in electrical workshops and industry.
to use handheld design measuring V, Ω, MΩ, Hz, A (mA)
dual display with bright EL backlight and bargraph
B Advanced safety features including live circuit protection without fuse damage, test lock out and
auto discharge after test
B Fully compliant with all European standards for insulation testing
B Insulation measurements up to 20 GΩ with 100, 250, 500 and 1000V test voltages and display of
test current
B On screen display of Polarisation Index and Dielectric Absorption Ratio for insulation quality
B Auto ranging resistance measurement to 200kΩ with a selectable 200mA or 50mA low resistance
test lead compensation
B Continuity test with adjustable thresholds, fast-responding buzzer and visual indicator (buzzer
can also be de-activated)
B True RMS voltage measurement with display of AC, DC and AC+DC values and mV resolution
B Leakage current measurement directly or with LEM current probes in current ranges from 200
μA to 200A
B LIMIT (adjustable alarm) to quickly and reliably identify fault conditions
B REC function for MIN, MAX, AVG values
B ZERO (REL) function to compensate measuring leads and for relative measurements
B Safety acc. EN 61557-2, -4, EN 61010, CAT III / 600V
B Easy
B Large
5000V Insulation Testers
Rugged design for 5000 Volt applications but delicate features to ensure proper testing and
recording of insulation measurements. Both the AMB-5KVD and AMB-5KV offer a built-in
voltmeter. The AMB-5KVD goes further with numerous test voltage increments for testing
insulation as well as internal memory and programmability.
AMB-5KVD
Digital 5 kV Insulation Resistance Tester
B Tests insulation of wires, cables,
transformers, motors and generators
B Comes as a complete kit including
test leads and PC software
B Built in automatic voltmeter up to
5000V warns against hazardous
energized systems
B Programmable setups of test
voltages and timers
B Performs the dielectric absorption
ratio test
B One testing instrument for low
and high voltage systems
B Internal memory, measurements
can be stored for future reference
B Data download to PC
B Rugged, durable case
AMB-5KV
Analog 5 kV Insulation Resistance Tester
B Tests insulation of wires, cables,
transformers, motors and generators
B Test voltages 500, 1000, 2500, 5000 VDC
B Measuring range 500K thru 500G ohms
B Built-in voltmeter 0 – 600Volts
FEATURES
B Lock feature applies testing voltage
continuously for Dielectric
Absorption Ratio Test
B Automatic discharge of
equipment capacitance for
operator safety
AMB-5KVD
AMB-5KV
Insulation resistance (500 VDC)
100 k to 100 GΩ
500 k to 100 GΩ
Insulation resistance (1000 VDC)
100 k to 250 GΩ
500 k to 250 GΩ
Insulation resistance (250 VDC)
100 k to 500 GΩ
500 k to 500 GΩ
Insulation resistance (5000 VDC)
100 k to 500 GΩ
500 k to 500 GΩ
500, 5000 V
600.0 V
Voltage AC/DC
Insulation Testers
FEATURES
General
Display
1999 digit dual LCD with special symbols, digit height 17 mm, 30 segment analogue
bar with over/ underflow and special display symbols, EL backlight
Protective type
IP40 according to EN 60529
External voltage
Measurement inhibited for external voltage Ux >10% of UN for MΩ and >3V for Ω
Max. overload
800 V eff RMS or RMS x frequency < 5x104 VHz
Auxiliary power
4 x 1.5 V mignon cells alkali-manganese(IEC LR6)
MΩ - RISO Insulation Resistance
Method
Voltage/current measurement as per EN 61557–2
Nominal test voltage
UN = 100V, 250V, 500V, 1000V DC
Open circuit voltage
U0 < 1.1 x UN
Nominal current
IN ≥ 1mA DC at UN IN ≥ 2.5mA DC at 100kΩ at 250V
Short circuit current
<10mA DC
R – Low Resistance Measurement
26
Method
Voltage/current measurement as per EN 61557–4
Open circuit voltage
U0 ≥ 4V
Short circuit current
Ik ≥ 200mA DC up to 2Ω as per IEC 61557
For detailed specifications go to www.Amprobe.eu
Download Suite Software Package
Download Suite is a software package compatible with the Amprobe instruments with download le
Do
ib
wn
at
capabilities.
load
mp
o
C
Suite
- Install software once and use it with various Amprobe products
- Download Suite features one installation and download package for all supported Amprobe Products - One file format - all instruments share the same file format. You can open files recorded by you, other people, or even
other Amprobe instruments right on your PC
- Download Suite automatically checks your version for upgrades and keeps your version current.
The software es control support the following products:
• AMB-45
• AMB-5KVD
Available in English only.
For detailed specifications go to www.Amprobe.eu
27
Software for Reporting of Installation and Machinery Tests
- Comfortable, extensible software for administration and reporting of installation and machinery tests
- Clear and logic hierarchy
- Directory structure, easy to handle (customer, site, department, UUT, Test), is always visible
- Measurement data transfer from test instrument to PC
- Print of test reports
- Export function for listings in text or Excel format
- New data records for UUT will be automatically created. Test results can be printed out quickly and easily
Special Features (es control PROF only)
- Administration of user authorisation for four different user groups
- Comparision and update of different es control databases
- Evaluation of test result for installation test
Software in three modules avaliable:
B Module „es control INST“ for reporting and documentation of installation tests in compliance with EN 60364,
DIN VDE 0100/0105, ÖVE E 8001, NIN/NIV, 16th Edition
B Module „es control PAT“ for reporting and documentation of machinery and appliance tests in compliance with
EN 60204, DIN VDE 0701/0702, ÖVE E8701
B Complete package „es control COMPL“ for reporting and documentation of installation, machinery and appliance
tests
The software es control support the following products:
• Genius 5035
• TELARIS 0100-PLUS
• TELARIS RCD-TEST
• TELARIS ISO-PRO
• TELARIS LOOP-TEST
• ALLTEST
Ensure safe operation and reduce power quality problems with Amprobe earth resistance
testers. Use the DGC-1000A for earth loop resistance checks.
DGC-1000A Earth Resistance Clamp Meter
B TRMS current measurement including
leakage current
B Earth loop resistance range 0.025 to 1500 Ω
B Data logging capability - 116 records
B Individual data point recording
B User selectable High & Low ohm
audible alarms
AC Current
B Simple and easy to use, no test
leads or auxiliary electrodes
necessary
B Jaw opening 23 mm
B Safety acc. EN 61010, CAT III/300V, .
CAT II/600 V
DGC-1000A
0.025Ω - 1500Ω
0.2A - 30.00A
TELARIS EARTH-TEST
Earth Resistance Tester
resistance measurement
earth resistance measurement
B The integrated constant current measurement
principle allows the application in sandy as well
in rocky environments
B Monitoring and display of auxiliary earth and
probe resistances
B Displays of the actual test current
B Automatic and manual and frequency selection
for noise reduction
28
B Earth
B Test
B Specific
B Clear
For detailed specifications go to www.Amprobe.eu
FEATURES
TELARIS EARTH-TEST
3 digit; LCD; 1999 Digits
Test voltage
max. 25 V / 50 V AC selectable
Meas. principle
Meas. range /
Resolution
Current-voltage measurement
Frequency
127 Hz / 140 Hz selectable
Protection class
II (double insulated)
Earth resistance
0.05...19.99 Ω / 0.01 Ω
20...199.9 Ω / 0.1 Ω
200...1999 Ω / 1 Ω
Safety complying with
IEC61010/EN61010/DIN VDE 0411
IEC61557/EN61557/DIN VDE 0413
Measurement category
CAT III / 300 V
Tolerance
±(4% rdg.+2 Digits / 0.1Ω)
Pollution degree
2
Probe/aux. resistance
0.1...50 kΩ / 0.1 kΩ
Protection degree
IP 50
Tolerance
±(10% rdg.+3Digits)
Auto-Power-Off
after approx. 5 min.
Test current display
0.1...13 mA / 0.1 mA
Power supply
6 x 1.5 V, IEC LR6
Tolerance
±(10% rdg.+3 Digits)
Max. test current
approx. 12 mA
Machinery Tester
measurement 500 V DC
testing (10 A AC), resistance and
voltage drop
B Continuity testing, 6 V AC/10 - 25 A AC
B Withstanding voltage to 4000 V
B Leakage current 0 - 50 mA
B Residual voltage measurement
B PC interface (RS-232) + protocol software
Earth Resistance Testers
Earth Resistance
TELARIS EARTH-TEST
Display
ALLTEST
Machinery Tester acc. EN 60204-1
Free demo version available
FEATURES
FEATURES
EARTH RESISTANCE & MACHINERY TEST
es control, es control PROF (professional)
B Insulation
B Specification
B Continuity
B Acoustic
Technical data
according to EN 60204-1
Range
(Resolution)
of limit value
signal for „OK“, „Fault“ and
„Warning“
B 700 memory locations
B Rugged waterproof case
B Safety acc. EN 61010, CAT III/600 V
Test
voltage
1000V AC
0-4000V AC
Test
current
Test time
Display of test voltage
and leakage current,
power 500 V A
Withstanding +
burn funcion (BURN)
1kV
0-4kV
Leakage current
0-50mA
(0,1mA)
Insulation
0-99,99MΩ
(10kOhm)
500V DC
2,2mA
1s to 10min
Possibility to adjust
a limit value
Continuity
Voltage drop
measurement
0-1 Ω
(0,001 Ω)
0-10V
(0,01V)
12V AC or 6V
AC
6 V AC
>10A or
>10<25A
AC*
1s to 15s
For testing the voltage
drop, the wire gauge ist
selectable:
1-1,5-2,5-4 and >6mm2
Residual voltage measurement
internal and external
0-10,0s
limit value 60V
0,5-500mA
1s to 10min
comments
1s to 10min for VDE 0702
limit value 1 s resp. 5 s
adjustable
Memory
700 memory locations
Case
rugged weatherproof case
Power supply
External power supply 230 V AC / 50 Hz
Standard Accessories
Cable for measurment of voltage stability, 1 pistol and 1 alligator clip, cable for insulation
measurement, cable with 4 alligator clips for low ohms measurement, protokol software and
interface cable to connect ALLTEST and PC, calibration certificate
voltage preselection
and large LCD providing the user
with an optimum visual indication of
both test values and limits
B Auto power off
B Earth resistance measurement 2/3 and
4-pole
B Specific earth resistance measurement in
compliance with the Wenner principle
For detailed specifications go to www.Amprobe.eu
29
Software for Reporting of Installation and Machinery Tests
- Comfortable, extensible software for administration and reporting of installation and machinery tests
- Clear and logic hierarchy
- Directory structure, easy to handle (customer, site, department, UUT, Test), is always visible
- Measurement data transfer from test instrument to PC
- Print of test reports
- Export function for listings in text or Excel format
- New data records for UUT will be automatically created. Test results can be printed out quickly and easily
Special Features (es control PROF only)
- Administration of user authorisation for four different user groups
- Comparision and update of different es control databases
- Evaluation of test result for installation test
Software in three modules avaliable:
B Module „es control INST“ for reporting and documentation of installation tests in compliance with EN 60364,
DIN VDE 0100/0105, ÖVE E 8001, NIN/NIV, 16th Edition
B Module „es control PAT“ for reporting and documentation of machinery and appliance tests in compliance with
EN 60204, DIN VDE 0701/0702, ÖVE E8701
B Complete package „es control COMPL“ for reporting and documentation of installation, machinery and appliance
tests
The software es control support the following products:
• Genius 5035
• TELARIS 0100-PLUS
• TELARIS RCD-TEST
• TELARIS ISO-PRO
• TELARIS LOOP-TEST
• ALLTEST
Ensure safe operation and reduce power quality problems with Amprobe earth resistance
testers. Use the DGC-1000A for earth loop resistance checks.
DGC-1000A Earth Resistance Clamp Meter
B TRMS current measurement including
leakage current
B Earth loop resistance range 0.025 to 1500 Ω
B Data logging capability - 116 records
B Individual data point recording
B User selectable High & Low ohm
audible alarms
AC Current
B Simple and easy to use, no test
leads or auxiliary electrodes
necessary
B Jaw opening 23 mm
B Safety acc. EN 61010, CAT III/300V, .
CAT II/600 V
DGC-1000A
0.025Ω - 1500Ω
0.2A - 30.00A
TELARIS EARTH-TEST
Earth Resistance Tester
resistance measurement
earth resistance measurement
B The integrated constant current measurement
principle allows the application in sandy as well
in rocky environments
B Monitoring and display of auxiliary earth and
probe resistances
B Displays of the actual test current
B Automatic and manual and frequency selection
for noise reduction
28
B Earth
B Test
B Specific
B Clear
For detailed specifications go to www.Amprobe.eu
FEATURES
TELARIS EARTH-TEST
3 digit; LCD; 1999 Digits
Test voltage
max. 25 V / 50 V AC selectable
Meas. principle
Meas. range /
Resolution
Current-voltage measurement
Frequency
127 Hz / 140 Hz selectable
Protection class
II (double insulated)
Earth resistance
0.05...19.99 Ω / 0.01 Ω
20...199.9 Ω / 0.1 Ω
200...1999 Ω / 1 Ω
Safety complying with
IEC61010/EN61010/DIN VDE 0411
IEC61557/EN61557/DIN VDE 0413
Measurement category
CAT III / 300 V
Tolerance
±(4% rdg.+2 Digits / 0.1Ω)
Pollution degree
2
Probe/aux. resistance
0.1...50 kΩ / 0.1 kΩ
Protection degree
IP 50
Tolerance
±(10% rdg.+3Digits)
Auto-Power-Off
after approx. 5 min.
Test current display
0.1...13 mA / 0.1 mA
Power supply
6 x 1.5 V, IEC LR6
Tolerance
±(10% rdg.+3 Digits)
Max. test current
approx. 12 mA
Machinery Tester
measurement 500 V DC
testing (10 A AC), resistance and
voltage drop
B Continuity testing, 6 V AC/10 - 25 A AC
B Withstanding voltage to 4000 V
B Leakage current 0 - 50 mA
B Residual voltage measurement
B PC interface (RS-232) + protocol software
Earth Resistance Testers
Earth Resistance
TELARIS EARTH-TEST
Display
ALLTEST
Machinery Tester acc. EN 60204-1
Free demo version available
FEATURES
FEATURES
EARTH RESISTANCE & MACHINERY TEST
es control, es control PROF (professional)
B Insulation
B Specification
B Continuity
B Acoustic
Technical data
according to EN 60204-1
Range
(Resolution)
of limit value
signal for „OK“, „Fault“ and
„Warning“
B 700 memory locations
B Rugged waterproof case
B Safety acc. EN 61010, CAT III/600 V
Test
voltage
1000V AC
0-4000V AC
Test
current
Test time
Display of test voltage
and leakage current,
power 500 V A
Withstanding +
burn funcion (BURN)
1kV
0-4kV
Leakage current
0-50mA
(0,1mA)
Insulation
0-99,99MΩ
(10kOhm)
500V DC
2,2mA
1s to 10min
Possibility to adjust
a limit value
Continuity
Voltage drop
measurement
0-1 Ω
(0,001 Ω)
0-10V
(0,01V)
12V AC or 6V
AC
6 V AC
>10A or
>10<25A
AC*
1s to 15s
For testing the voltage
drop, the wire gauge ist
selectable:
1-1,5-2,5-4 and >6mm2
Residual voltage measurement
internal and external
0-10,0s
limit value 60V
0,5-500mA
1s to 10min
comments
1s to 10min for VDE 0702
limit value 1 s resp. 5 s
adjustable
Memory
700 memory locations
Case
rugged weatherproof case
Power supply
External power supply 230 V AC / 50 Hz
Standard Accessories
Cable for measurment of voltage stability, 1 pistol and 1 alligator clip, cable for insulation
measurement, cable with 4 alligator clips for low ohms measurement, protokol software and
interface cable to connect ALLTEST and PC, calibration certificate
voltage preselection
and large LCD providing the user
with an optimum visual indication of
both test values and limits
B Auto power off
B Earth resistance measurement 2/3 and
4-pole
B Specific earth resistance measurement in
compliance with the Wenner principle
For detailed specifications go to www.Amprobe.eu
29
Non-Contact VoltProbes®
Digital Ohm
Digital Voltage and continuity tester with phase rotation
Designed for safety and limited troubleshooting without the expense. Fits conveniently in a shirt
pocket, tool belt, or pouch.
VP-440RT Non-Contact VoltProbe
B Locating
B Uses
B Voltage
of circuit breakers
range: 110 - 600 V AC
B Locating of defective fuses
B No disconnection of electrical system necessary
B Test
non-contact method of Voltage testing
for AC Voltage cables, wall sockets, junction
boxes, etc.
B LCD
B Data
B 12
Display with backlight
V to 690 V AC & DC voltage range
B Continuity test (optical + sound)
B Phase rotation test
B Polarity indication
B Phase testing
B 30mA
Hold function
RCD trip test
B Automatic Backlight
B Undetachably tip protection
B IP65 water jet and dust tight protection
B Safety acc. EN 61010, CAT III/600 V
VP-440
Phase Sequence
B Detect
AC Voltage (100 - 600 V)
non-contact method of Voltage testing
B Totally insulated, no exposed metal or .
conductive parts
B Check for AC Voltages without necessity of .
disconnecting the electrical system
B Use
B Test
for AC Voltage cables, circuit breakers, wall
sockets, .
junction boxes, fuses, etc.
B Safety acc. EN 61010, CAT III/600 V
Phase sequence testing is crucial for some of the three-phase loads, whenever they need to be
connected to the electrical system. Improper connection of three-phase motors may lead to
reverse rotation, and as a result it may damage equipment powered by a motor. Amprobe's
Phase Sequence and Motor Rotation Tester is used to assure used to assure proper and safe
connection of the electrical equipment on three-phase systems.
ELECTRICAL TESTERS
VP-600SB Non-Contact VoltProbe
PRM-3 Phase Sequence & Motor Rotation Tester
FEATURES
VP-440
AC Voltage Detection
Indicator
VP-600SB
100 - 600 V
Lights
Lights, Beeps and Vibrates
B Phase sequence indication of the
three phase electrical systems
B Check for normal or reversed phases
B Three phase motor rotation indication
B Phase voltage loss or voltage
sag indication
B Safety acc. EN 61010, CAT III/600 V
VT201A Non-Contact Voltage Detector
B Quickly
check for the presence of AC voltages,
B Detector emits loud audible chirping
with no electrical contact
B Bright flashing LED
B Safe non-contact detection of voltages from 70 V B On/Off button beep confirms unit and
to 440 V AC
batter is working
B Both visible and audible indicators
MT-1000L Non-Contact Magnetic Tester
B Non-contact
magnetic field tester with torch
function
B Build-in magnetic field sensor enables magnetic
fields to be detected
B The test tip lights up immediately without any
metal contact as soon as a magnetic field is
detected
B The
test lamp reacts to all magnetic fields
in three-phase current, direct current and
permanent magnets
B Testing of Solenoid Valves
B Ultrabright LED
B incl. Test Magnet and Batteries
Multitest Sigma
Voltage and continuity tester with phase rotation
30
The HV231-10A is a high voltage probe designed to extend the voltage measuring capability of
an AC/DC voltmeter. The probe is to be used to make measurements on energy limited circuits
within equipment. Examples include high voltage within televisions or photo copy machines.
LP10B, LP25B Pen-size logic probes
B
Troubleshoot and analyze digital logic circuits
LP25B: Increased frequency range. Detects Pulses>30 ns up to 25 MHz, TTL, CMOS,
DTL, RTL, NMOS, MOS Logic, dual LEDs and tone indicate hi/lo state.
HV231-10A High voltage probe
Extended voltage measuring to 40 kV
Use with standard multimeters with 10 MΩ input impedance
B For measurements on energy limited circuits
B
B
Data Hold function
30 mA RCD trip test
B Undetachably tip protection
B IP65 water jet and dust tight protection
B Safety acc. EN 61010, CAT III/600 V
B
B
B
B
For detailed specifications go to www.Amprobe.eu
These two logic probes troubleshoot and analyze most digital logical circuits. The LP10A logic
probe is used for most types of TTL and CMOS circuits. The LP25A logic probe tests more types
of digital circuits. Both probes detect pulses of more than 30 ns.
LP10B: Evaluates most common circuits. Detects pulses>30 ns up to 17 MHz, TTL,
CMOS levels and dual LEDs indicate hi/lo state.
Voltage & Continuity Testers
12 V to 690 V AC & DC voltage range
Continuity test (optical + sound)
B Phase rotation test
B Polarity indication
B Phase testing
Specialty Probes
For detailed specifications go to www.Amprobe.eu
31
Non-Contact VoltProbes®
Digital Ohm
Digital Voltage and continuity tester with phase rotation
Designed for safety and limited troubleshooting without the expense. Fits conveniently in a shirt
pocket, tool belt, or pouch.
VP-440RT Non-Contact VoltProbe
B Locating
B Uses
B Voltage
of circuit breakers
range: 110 - 600 V AC
B Locating of defective fuses
B No disconnection of electrical system necessary
B Test
non-contact method of Voltage testing
for AC Voltage cables, wall sockets, junction
boxes, etc.
B LCD
B Data
B 12
Display with backlight
V to 690 V AC & DC voltage range
B Continuity test (optical + sound)
B Phase rotation test
B Polarity indication
B Phase testing
B 30mA
Hold function
RCD trip test
B Automatic Backlight
B Undetachably tip protection
B IP65 water jet and dust tight protection
B Safety acc. EN 61010, CAT III/600 V
VP-440
Phase Sequence
B Detect
AC Voltage (100 - 600 V)
non-contact method of Voltage testing
B Totally insulated, no exposed metal or .
conductive parts
B Check for AC Voltages without necessity of .
disconnecting the electrical system
B Use
B Test
for AC Voltage cables, circuit breakers, wall
sockets, .
junction boxes, fuses, etc.
B Safety acc. EN 61010, CAT III/600 V
Phase sequence testing is crucial for some of the three-phase loads, whenever they need to be
connected to the electrical system. Improper connection of three-phase motors may lead to
reverse rotation, and as a result it may damage equipment powered by a motor. Amprobe's
Phase Sequence and Motor Rotation Tester is used to assure used to assure proper and safe
connection of the electrical equipment on three-phase systems.
ELECTRICAL TESTERS
VP-600SB Non-Contact VoltProbe
PRM-3 Phase Sequence & Motor Rotation Tester
FEATURES
VP-440
AC Voltage Detection
Indicator
VP-600SB
100 - 600 V
Lights
Lights, Beeps and Vibrates
B Phase sequence indication of the
three phase electrical systems
B Check for normal or reversed phases
B Three phase motor rotation indication
B Phase voltage loss or voltage
sag indication
B Safety acc. EN 61010, CAT III/600 V
VT201A Non-Contact Voltage Detector
B Quickly
check for the presence of AC voltages,
B Detector emits loud audible chirping
with no electrical contact
B Bright flashing LED
B Safe non-contact detection of voltages from 70 V B On/Off button beep confirms unit and
to 440 V AC
batter is working
B Both visible and audible indicators
MT-1000L Non-Contact Magnetic Tester
B Non-contact
magnetic field tester with torch
function
B Build-in magnetic field sensor enables magnetic
fields to be detected
B The test tip lights up immediately without any
metal contact as soon as a magnetic field is
detected
B The
test lamp reacts to all magnetic fields
in three-phase current, direct current and
permanent magnets
B Testing of Solenoid Valves
B Ultrabright LED
B incl. Test Magnet and Batteries
Multitest Sigma
Voltage and continuity tester with phase rotation
30
The HV231-10A is a high voltage probe designed to extend the voltage measuring capability of
an AC/DC voltmeter. The probe is to be used to make measurements on energy limited circuits
within equipment. Examples include high voltage within televisions or photo copy machines.
LP10B, LP25B Pen-size logic probes
B
Troubleshoot and analyze digital logic circuits
LP25B: Increased frequency range. Detects Pulses>30 ns up to 25 MHz, TTL, CMOS,
DTL, RTL, NMOS, MOS Logic, dual LEDs and tone indicate hi/lo state.
HV231-10A High voltage probe
Extended voltage measuring to 40 kV
Use with standard multimeters with 10 MΩ input impedance
B For measurements on energy limited circuits
B
B
Data Hold function
30 mA RCD trip test
B Undetachably tip protection
B IP65 water jet and dust tight protection
B Safety acc. EN 61010, CAT III/600 V
B
B
B
B
For detailed specifications go to www.Amprobe.eu
These two logic probes troubleshoot and analyze most digital logical circuits. The LP10A logic
probe is used for most types of TTL and CMOS circuits. The LP25A logic probe tests more types
of digital circuits. Both probes detect pulses of more than 30 ns.
LP10B: Evaluates most common circuits. Detects pulses>30 ns up to 17 MHz, TTL,
CMOS levels and dual LEDs indicate hi/lo state.
Voltage & Continuity Testers
12 V to 690 V AC & DC voltage range
Continuity test (optical + sound)
B Phase rotation test
B Polarity indication
B Phase testing
Specialty Probes
For detailed specifications go to www.Amprobe.eu
31
B Internal
memory for 99 single
measurement storage
B Opto-isolated RS232 interface for further
analysis and charting
B 50 Hertz operation facilities
Perfect for monitoring computer and power systems as well as:
• Testing of the delivered energy
• Testing of the voltage quality
• Testing and securing a clean operation, e.g. in hospitals or production facilities
Note: only available in English or German language.
Voltage and current measurement
Function
Range (V)
Resolution (V)
Input impedance
Overload
protection
Voltage measurement
Current measurement
300, 600 (Autorange)
1
0.2
0.001
300 kOhm
100 kOhm
900 V (1 min.)
5V
FEATURES
PQ55A
Voltage measurement
600 Vrms
Current measurement
Input I1, I2, I3 999.9 A
Input
I4 250 A
Clamp opening
40 mm
Active power (P)
999.9 kW
Apparent power (S)
999.9 kVA
Idle power (Q)
999.9 kVAr
Function
Range
max. resolution
Phase angle (f)
0 ° to 90 °
Harmonic measurement
Frequency measurement
45 to 80 Hz
DC - 25. harmonic
26 - 33. harmonic
34 - 50. harmonic
0.1 V/0.1 A
0.1 V/0.1 A
0.1 V/0.1 A
Harmonics measurement (Using PC)
up to the 31st harmonics
Active power (kWh)
119.3 MWh
Apparent power (kVAh)
119.3 MVAh
Idle power (kvarh)
119.3 Mvarh
Data logger
512 kb, non-volatile memory
Sampling rate
5 s, 30 s, 1 min, 2 min (adjustable)
Safety acc.
EN 61010, CAT III/600 V
PF measurement
Function
PF
Resolution
PF measurement
0.2
0.5
0.8
0.01 digits
0.01 digits
0.01 digits
Harmonic measurement
Power measurement
Function
Active power
Reactive power
Apparent power
Power Quality Analyzers
ENERGYTEST 2020 E
Handy 3-Phase Power Analyzer
ENERGYTEST 2020 E is a three-phase power analyser and recorder capable of carrying out a
complete analysis of voltages, current and related harmonics, active and reactive powers as well
as active and reactive energies. It also permits to analyse the voltage and current harmonic
components to check and possibly solve all the problems related to the harmonic presence.
32
For detailed specifications go to www.Amprobe.eu
Active energy
(Class 2 IEC 1036)
Reactive energy
(Class 3 IEC 1268)
Range
Resolution
0
1
1
0
1
1
0
1
1
0
1
1
0
1
1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
- 999.9 W
kW - 999.9 kW
MW - 999.9 MW
- 999.9 VAR
kVAR - 999.9 kVAR
MVAR - 999.9 MVAR
- 999.9 VA
- 999.9 kVA
- 999.9 MVA
- 999.9 WH
- 999.9 kWH
- 999.9 MWH
- 999.9 VARH
- 999.9 kVARH
- 999.9 MVARH
W
kW
MW
VAR
kVAR
MVAR
VA
kVA
MVA
WH
kWH
MWH
VARH
kVARH
MVARH
POWER QUALITY
The PQ55A offers real time monitoring, recording and analysis of three phase power systems.
The complete set includes the handheld mainframe, four current clamp adaptors, test leads
with alligator clips, RS232 cable and software CD, large soft carrying case with compartments
and users manual.
real time monitoring, recording
and analysis of three phase power systems
B True-RMS voltage and current measurement
B Power Factor and phase angle results
B Power Analysis (apparent, active and .
reactive power)
B Additional current clamp for neutral line
monitoring
class 2 according to EN 61036.
Safety acc. EN 61010, CAT III/600 V
B Current range 5 mA to 3000 A,
depending on used clamp adapter.
measurement
measurement
B Harmonics up to 49th
B Incl. 2 MB memory for long self-powering
recording
B Power
PQ55A
Handheld power analyzer for three-phase power system
measurements
B Comprehensive
B Accuracy
B Energy
Power Quality Recorder
ENERGYTEST 2020 E is equipped with 2 MB memory. The selected recording rate (5 sec. to 60 min.)
and the amount of selected channels (1-64 signals) determine the maximum recording time.
Example: With an interval of 10 s and 5 selected parameters the max. recording time is 4 days
and 8 hours. With an interval of 1 min. the recording time is 26 days. This includes up to
35 recordings/measurement that can be stored
For detailed specifications go to www.Amprobe.eu
33
B Internal
memory for 99 single
measurement storage
B Opto-isolated RS232 interface for further
analysis and charting
B 50 Hertz operation facilities
Perfect for monitoring computer and power systems as well as:
• Testing of the delivered energy
• Testing of the voltage quality
• Testing and securing a clean operation, e.g. in hospitals or production facilities
Note: only available in English or German language.
Voltage and current measurement
Function
Range (V)
Resolution (V)
Input impedance
Overload
protection
Voltage measurement
Current measurement
300, 600 (Autorange)
1
0.2
0.001
300 kOhm
100 kOhm
900 V (1 min.)
5V
FEATURES
PQ55A
Voltage measurement
600 Vrms
Current measurement
Input I1, I2, I3 999.9 A
Input
I4 250 A
Clamp opening
40 mm
Active power (P)
999.9 kW
Apparent power (S)
999.9 kVA
Idle power (Q)
999.9 kVAr
Function
Range
max. resolution
Phase angle (f)
0 ° to 90 °
Harmonic measurement
Frequency measurement
45 to 80 Hz
DC - 25. harmonic
26 - 33. harmonic
34 - 50. harmonic
0.1 V/0.1 A
0.1 V/0.1 A
0.1 V/0.1 A
Harmonics measurement (Using PC)
up to the 31st harmonics
Active power (kWh)
119.3 MWh
Apparent power (kVAh)
119.3 MVAh
Idle power (kvarh)
119.3 Mvarh
Data logger
512 kb, non-volatile memory
Sampling rate
5 s, 30 s, 1 min, 2 min (adjustable)
Safety acc.
EN 61010, CAT III/600 V
PF measurement
Function
PF
Resolution
PF measurement
0.2
0.5
0.8
0.01 digits
0.01 digits
0.01 digits
Harmonic measurement
Power measurement
Function
Active power
Reactive power
Apparent power
Power Quality Analyzers
ENERGYTEST 2020 E
Handy 3-Phase Power Analyzer
ENERGYTEST 2020 E is a three-phase power analyser and recorder capable of carrying out a
complete analysis of voltages, current and related harmonics, active and reactive powers as well
as active and reactive energies. It also permits to analyse the voltage and current harmonic
components to check and possibly solve all the problems related to the harmonic presence.
32
For detailed specifications go to www.Amprobe.eu
Active energy
(Class 2 IEC 1036)
Reactive energy
(Class 3 IEC 1268)
Range
Resolution
0
1
1
0
1
1
0
1
1
0
1
1
0
1
1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
- 999.9 W
kW - 999.9 kW
MW - 999.9 MW
- 999.9 VAR
kVAR - 999.9 kVAR
MVAR - 999.9 MVAR
- 999.9 VA
- 999.9 kVA
- 999.9 MVA
- 999.9 WH
- 999.9 kWH
- 999.9 MWH
- 999.9 VARH
- 999.9 kVARH
- 999.9 MVARH
W
kW
MW
VAR
kVAR
MVAR
VA
kVA
MVA
WH
kWH
MWH
VARH
kVARH
MVARH
POWER QUALITY
The PQ55A offers real time monitoring, recording and analysis of three phase power systems.
The complete set includes the handheld mainframe, four current clamp adaptors, test leads
with alligator clips, RS232 cable and software CD, large soft carrying case with compartments
and users manual.
real time monitoring, recording
and analysis of three phase power systems
B True-RMS voltage and current measurement
B Power Factor and phase angle results
B Power Analysis (apparent, active and .
reactive power)
B Additional current clamp for neutral line
monitoring
class 2 according to EN 61036.
Safety acc. EN 61010, CAT III/600 V
B Current range 5 mA to 3000 A,
depending on used clamp adapter.
measurement
measurement
B Harmonics up to 49th
B Incl. 2 MB memory for long self-powering
recording
B Power
PQ55A
Handheld power analyzer for three-phase power system
measurements
B Comprehensive
B Accuracy
B Energy
Power Quality Recorder
ENERGYTEST 2020 E is equipped with 2 MB memory. The selected recording rate (5 sec. to 60 min.)
and the amount of selected channels (1-64 signals) determine the maximum recording time.
Example: With an interval of 10 s and 5 selected parameters the max. recording time is 4 days
and 8 hours. With an interval of 1 min. the recording time is 26 days. This includes up to
35 recordings/measurement that can be stored
For detailed specifications go to www.Amprobe.eu
33
B Insulation
resistance: test voltage 50 V, 100
V, 250 V, 500V, 1000 V DC, EN 61557-2
B Loop and line impedance, display of short
circuit current Ik, EN 61557-3
B Low ohm measurement with > 200 mA DC,
EN 61557-4
B RCD
testing: tripping time, tripping current,
touch leakage voltage Ub, EN 61557-6
B Measurement of earth resistance and ground
resistivity, EN 61557-5
B Phase sequence, EN 61557-7
Safety standards:The instrument complies with the general safety appointments according to EN
61010-1, CAT III 600 V for voltage measurement.
Display:
Graphical – dot matrix
Resolution: 128 x 128 (16384 pixel)
Visible region: 73 x 73 mm
Accessories:Clamp-Ons and adapter for the 3 analog inputs. The transforming ratio for the
3 analog inputs is selectable. Depending on wich Clamp-On is used, the
measuring rate can be extended from 5 mA to 3000 A.
Additional Power Analyzer Function:
• Current, Voltage
• Apparent power, reactive power, active
power, Power Factor
• Power consumption, energy
• Harmonic analysis of voltages and currents
• Residual voltage, voltage drops
• Voltage peaks
Technical features of Genius 5035 + GSC-53 A
Technical features of Genius 5035 + GSC-53 A
Analog input (only GSC-53 A)
-1000 m VDC - +1000 mV DC
AC Voltage
Resolution
0,1 mV
Range
500 V
Temperature adapter (HT52)
-40 °C - 80 °C
Resolution
1V
Humidity (HT52)
10 - 98 % RH
Frequency
Intensity of light (HT53)
0 - 20.000 Lux
Range
15,3 - 99,9 Hz
Resolution
Low Ohm range (Low resistance
measurement)
0 - 20 Ohm
Resolution
0,01 Ohm
Test current
> 200 mA DC
Open circuit viltage
> 4,5 V
Test lead compensation
Yes
Insulation resistance
Test current
100, 250, 500, 1000 V DC
Range
0 - 1,999 MOhm
2 - 19,99 MOhm
20 - 999,9 MOhm
Resolution
1 kOhm
Open circuit voltage
1,3 x Test voltage
Short circuit current
1,4 mA (max.)
Rated voltage
1 mA
Range
0 - 19,99 Ohm
20 - 199,9 Ohm
200 - 1999 Ohm
Resolution
Note: only available in English or German language.
0,01 Ohm
0,1 Ohm
1 Ohm
Grafic display, back light (only
GSC-53 A)
Memory
128 kbyte (Genius 5035)
Interface
RS232
Recording interval
adjustable from 5 sec. up to 15
min. (only GSC-53 A)
Memory
GSC-53 A
2 MB,
for appr. 700 - 1000 measuring
quantities for VDE 0100
resp. max. 67 days recording
Auto power off
10 min.
RCD type
AC, A and selective
Rated tripping currents
10 mA, 30 mA, 100 mA
300 mA, 500 mA, 1000 mA
Trip Time (IΔN)
*) with control of contact voltage
Test current
**) excluding 500 mA
and 1000 mA
General data of Genius 5035
Autonomy
5000 measurements
Relative humidity
85 %
Safety:
EN61010 CAT III 600 V
Protection class
IP50
Dimension
225 x 165 x 120 mm
Weight
appr. 1500 g
Power supply
6 x 1,5 V, AA LR6
Frequency
125 Hz ± 1 Hz (Sinus)
Test current
≤ 10 mA
Open circuit voltage
≤ 80 V
Loop Impedanz Phase-Phase(Zpp), Phase-Neutral (Zpn),
Phase-Earth (Zpe)
Range
Resolution
Measuring
1/2 IΔN
2 IΔN
5 IΔN RCD S**
5 IΔN RCD**
Range
0 - 1999 ms
0 - 199,9 ms
0 - 150 ms
Earth resistance
The GSC-53A is available in following versions:
• GSC-53A without clamp adapters
• GSC-53A with 3 flex clamp adapters ACF-3003
Display
L1, L2, L3 or L2, L1, L3
RCD tests
10 kOhm
0,1 Hz
1 Hz
Phase sequencing
100 kOhm
Additional Adapter Function:
The GSC-53 A is equipped with 3 analog inputs that allows measurement (with adapters) and
storage of the following environmental parameters:
• Temperature • Humidity • Lux • Noise and Leq (dB) Type 1
General data of Genius 5035 + GSC-53 A
100 - 499 Hz
0 - 40 ms
Resolution
0,1 ms*
Range
(0,5 - 1,4) IΔN
Resolution
0,1 IΔN
Trip current
Touch current
Range
0 - 100 V
Resolution
0,1 V
UB lim:
25 V or 50 V
Power (only GSC-53 A)
Resolution
10 W
0 - 19,99 Ohm
Harmonics (only GSC-53 A)
20 - 199,9 Ohm
200 - 1999 Ohm
Safety: IEC/EN 61010 (VDE 0411)
all measurement according to VDE 0413 (EN 61557)
0,01 Ohm
Range
2. - 50. harmonic
POWER QUALITY
GSC-53 A
3 Phase Power Analyzer and Multifunction Installation Tester
0,1 Ohm, 1 Ohm
10 A ± 10 % (10 ms)
Calculation of short circuit current
Ik max (theoretically)
40 kA
Earth resistance RE without RCD tripping
34
For detailed specifications go to www.Amprobe.eu
Range RE
0,1 Ohm - 10 kOhm
Test current
0,5 IΔN RCD
For detailed specifications go to www.Amprobe.eu
35
B Insulation
resistance: test voltage 50 V, 100
V, 250 V, 500V, 1000 V DC, EN 61557-2
B Loop and line impedance, display of short
circuit current Ik, EN 61557-3
B Low ohm measurement with > 200 mA DC,
EN 61557-4
B RCD
testing: tripping time, tripping current,
touch leakage voltage Ub, EN 61557-6
B Measurement of earth resistance and ground
resistivity, EN 61557-5
B Phase sequence, EN 61557-7
Safety standards:The instrument complies with the general safety appointments according to EN
61010-1, CAT III 600 V for voltage measurement.
Display:
Graphical – dot matrix
Resolution: 128 x 128 (16384 pixel)
Visible region: 73 x 73 mm
Accessories:Clamp-Ons and adapter for the 3 analog inputs. The transforming ratio for the
3 analog inputs is selectable. Depending on wich Clamp-On is used, the
measuring rate can be extended from 5 mA to 3000 A.
Additional Power Analyzer Function:
• Current, Voltage
• Apparent power, reactive power, active
power, Power Factor
• Power consumption, energy
• Harmonic analysis of voltages and currents
• Residual voltage, voltage drops
• Voltage peaks
Technical features of Genius 5035 + GSC-53 A
Technical features of Genius 5035 + GSC-53 A
Analog input (only GSC-53 A)
-1000 m VDC - +1000 mV DC
AC Voltage
Resolution
0,1 mV
Range
500 V
Temperature adapter (HT52)
-40 °C - 80 °C
Resolution
1V
Humidity (HT52)
10 - 98 % RH
Frequency
Intensity of light (HT53)
0 - 20.000 Lux
Range
15,3 - 99,9 Hz
Resolution
Low Ohm range (Low resistance
measurement)
0 - 20 Ohm
Resolution
0,01 Ohm
Test current
> 200 mA DC
Open circuit viltage
> 4,5 V
Test lead compensation
Yes
Insulation resistance
Test current
100, 250, 500, 1000 V DC
Range
0 - 1,999 MOhm
2 - 19,99 MOhm
20 - 999,9 MOhm
Resolution
1 kOhm
Open circuit voltage
1,3 x Test voltage
Short circuit current
1,4 mA (max.)
Rated voltage
1 mA
Range
0 - 19,99 Ohm
20 - 199,9 Ohm
200 - 1999 Ohm
Resolution
Note: only available in English or German language.
0,01 Ohm
0,1 Ohm
1 Ohm
Grafic display, back light (only
GSC-53 A)
Memory
128 kbyte (Genius 5035)
Interface
RS232
Recording interval
adjustable from 5 sec. up to 15
min. (only GSC-53 A)
Memory
GSC-53 A
2 MB,
for appr. 700 - 1000 measuring
quantities for VDE 0100
resp. max. 67 days recording
Auto power off
10 min.
RCD type
AC, A and selective
Rated tripping currents
10 mA, 30 mA, 100 mA
300 mA, 500 mA, 1000 mA
Trip Time (IΔN)
*) with control of contact voltage
Test current
**) excluding 500 mA
and 1000 mA
General data of Genius 5035
Autonomy
5000 measurements
Relative humidity
85 %
Safety:
EN61010 CAT III 600 V
Protection class
IP50
Dimension
225 x 165 x 120 mm
Weight
appr. 1500 g
Power supply
6 x 1,5 V, AA LR6
Frequency
125 Hz ± 1 Hz (Sinus)
Test current
≤ 10 mA
Open circuit voltage
≤ 80 V
Loop Impedanz Phase-Phase(Zpp), Phase-Neutral (Zpn),
Phase-Earth (Zpe)
Range
Resolution
Measuring
1/2 IΔN
2 IΔN
5 IΔN RCD S**
5 IΔN RCD**
Range
0 - 1999 ms
0 - 199,9 ms
0 - 150 ms
Earth resistance
The GSC-53A is available in following versions:
• GSC-53A without clamp adapters
• GSC-53A with 3 flex clamp adapters ACF-3003
Display
L1, L2, L3 or L2, L1, L3
RCD tests
10 kOhm
0,1 Hz
1 Hz
Phase sequencing
100 kOhm
Additional Adapter Function:
The GSC-53 A is equipped with 3 analog inputs that allows measurement (with adapters) and
storage of the following environmental parameters:
• Temperature • Humidity • Lux • Noise and Leq (dB) Type 1
General data of Genius 5035 + GSC-53 A
100 - 499 Hz
0 - 40 ms
Resolution
0,1 ms*
Range
(0,5 - 1,4) IΔN
Resolution
0,1 IΔN
Trip current
Touch current
Range
0 - 100 V
Resolution
0,1 V
UB lim:
25 V or 50 V
Power (only GSC-53 A)
Resolution
10 W
0 - 19,99 Ohm
Harmonics (only GSC-53 A)
20 - 199,9 Ohm
200 - 1999 Ohm
Safety: IEC/EN 61010 (VDE 0411)
all measurement according to VDE 0413 (EN 61557)
0,01 Ohm
Range
2. - 50. harmonic
POWER QUALITY
GSC-53 A
3 Phase Power Analyzer and Multifunction Installation Tester
0,1 Ohm, 1 Ohm
10 A ± 10 % (10 ms)
Calculation of short circuit current
Ik max (theoretically)
40 kA
Earth resistance RE without RCD tripping
34
For detailed specifications go to www.Amprobe.eu
Range RE
0,1 Ohm - 10 kOhm
Test current
0,5 IΔN RCD
For detailed specifications go to www.Amprobe.eu
35
Air Flow
Relative Humidity
Ideal for HVAC/R technicians, electricians, research, industrial process and quality control
These temperature meters use a precision capacitance sensor to deliver accurate performance
with long term stability. These high accuracy instruments measure the full range of relative
humidity from 0% to 100%
TMA10A Anemometer with flexible precision vane
B Measure
air velocity or air volume
the surface area for accurate air
flow measurements
B Precise thermistor for temperature
B Continuous moving average results for
up to two hours
B Input
FUNCTION
Air Velocity m/s
ft/min
Air Flow cm/s
cf/m
B MIN/MAX/AVG
readings
velocity average for eight
multiple points
B Data hold to freeze measurement
display of both readings
B Deluxe hard carrying case
B Air
RANGE
ACCURACY
0.40 m to 25.00 m/s
± 2 % of full scale
125 ft to 4900 ft/min
± 2 % of full scale
0.01 m to 99.99 m3/sec
0 to 9.999 m
1 ft to 9999 ft3/min
0 to 9.999 ft
0 °C to 50 °C
± 0.8 °C
Air Temp. °C
TH-3, THWD-3
Relative Humidity Temperature Meters
B Dual
B Wet
B Relative
B Dew
bulb (THWD-3 only)
point (THWD-3 only)
B Data Hold
B Auto Power off
B Soft Carrying Case
display
function monitors humidity and .
temperature changes (TH-3)
B Extended probe stem to easily access air ducts
B Capacitive sensor with protective cover
B Min/Max readings
SPECIFICATIONS
<10, >90 %RH ± 5.0 %RH 10 to 90 %RH ± 3.0 %RH Temperature coefficient:
0.1x(specified accuracy)/ °C (<23 °C or >23 °C) TH-3 & THWD-3 %RH Accuracy @ 23 °C
Temperature
Temperature Accuracy -20 to 60 °C ± 0.8 °C
TMD90A Dual input digital thermometer w/ triple display
THWD-3 (only) Wet Bulb & Dew Point
Temperature Accuracy -20 to 60 °C ± 0.8 °C Ideal for HVAC/R technicians, electricians, research, industrial process and quality control
display of T1, T2, T1 - T2, plus .
relative time stamp
B Dual inputs‑for easy super-heat and
sub-cool temperature measurements
B Deluxe hard carrying case, 2 Type K probes
SPECIFICATIONS
B Accepts Type J, K, T, R, S, E
thermocouple inputs
B RS232 output with optional cable
and software, TM-SWA
Infrared Thermometer
A quick and effective diagnostic tool for identifying problems in a wide variety of
applications like HVAC/R, fire safety and protection, industrial, maintenance, automotive.
IR608A IR Thermometer Laser Pointer
RANGE
ACCURACY
Type K
-200 °C to 1370 °C
(0.1 % rdg + 0.7 °C)
B Laser
B Fast
Type J
-200 °C to 760 °C
(0.1 % rdg + 0.7 °C)
B “Pistol
B 8:1
Type T
-200 °C to 390 °C
(0.1 % rdg + 0.7 °C)
0 °C to 1760 °C
(0.3 % rdg + 0.7 °C)
-200 °C to 736 °C
(0.3 % rdg + 0.7 °C)
Type R & S
Type E
TM45A Type K single input thermometer
Ideal for HVAC/R contractor, plant maintenance, commercial building service
B Unique,
B °C/°F
B Small,
mini-stick design thermometer
go-anywhere size
B Type K thermocouple compatible
B Data
and 1°/0.1° selectable
and max hold
B Type K probe and carrying case included
ENVIRONMENTAL TESTERS
B Triple
pointer for easy targeting
grip design” for easy reading
B Display Hold
B Backlit display
response time
Field of view
B Fixed emissivity at 0.95
IR610A IR Thermometer
B Laser
B Data
B Measures
B Fixed
pointer for accurate targeting
to 260 °C front panel switchable
B Narrow 10:1 field of view measures 25 mm at .25 m
distance
B Large 3-1/2 digit display with backlight
Hold, low battery indicator
emissivity at 0.95
B Rugged Valox® case
B Shipped with carrying case
and batteries
Surface Probe
TPP1-C1 Immersion probe pocket thermometer
TPP2-C1 Flat surface probe pocket thermometer
SPECIFICATIONS
B 0.1
Range
B Easy-to-read
Distance to spot size
°C (0.1 °F) resolution
digital display
B Data Hold to freeze display
B Temperature ranges:
-50 °C to 250 °C
B Protective probe sleeve (TPP1 only)
36
For detailed specifications go to www.Amprobe.eu
IR608A
IR610A
-18 °C to 400 °C
-20 °C to 260 °C
8:1 ratio
10:1 ratio
N/A
1 °C
Accuracy
± 2 % of reading or ± 2 °C,
whichever is greater
± 3% of rdg or ± 3 °C
Emissivity
Pre-set 0.95
N/A
Resolution
For detailed specifications go to www.Amprobe.eu
37
Air Flow
Relative Humidity
Ideal for HVAC/R technicians, electricians, research, industrial process and quality control
These temperature meters use a precision capacitance sensor to deliver accurate performance
with long term stability. These high accuracy instruments measure the full range of relative
humidity from 0% to 100%
TMA10A Anemometer with flexible precision vane
B Measure
air velocity or air volume
the surface area for accurate air
flow measurements
B Precise thermistor for temperature
B Continuous moving average results for
up to two hours
B Input
FUNCTION
Air Velocity m/s
ft/min
Air Flow cm/s
cf/m
B MIN/MAX/AVG
readings
velocity average for eight
multiple points
B Data hold to freeze measurement
display of both readings
B Deluxe hard carrying case
B Air
RANGE
ACCURACY
0.40 m to 25.00 m/s
± 2 % of full scale
125 ft to 4900 ft/min
± 2 % of full scale
0.01 m to 99.99 m3/sec
0 to 9.999 m
1 ft to 9999 ft3/min
0 to 9.999 ft
0 °C to 50 °C
± 0.8 °C
Air Temp. °C
TH-3, THWD-3
Relative Humidity Temperature Meters
B Dual
B Wet
B Relative
B Dew
bulb (THWD-3 only)
point (THWD-3 only)
B Data Hold
B Auto Power off
B Soft Carrying Case
display
function monitors humidity and .
temperature changes (TH-3)
B Extended probe stem to easily access air ducts
B Capacitive sensor with protective cover
B Min/Max readings
SPECIFICATIONS
<10, >90 %RH ± 5.0 %RH 10 to 90 %RH ± 3.0 %RH Temperature coefficient:
0.1x(specified accuracy)/ °C (<23 °C or >23 °C) TH-3 & THWD-3 %RH Accuracy @ 23 °C
Temperature
Temperature Accuracy -20 to 60 °C ± 0.8 °C
TMD90A Dual input digital thermometer w/ triple display
THWD-3 (only) Wet Bulb & Dew Point
Temperature Accuracy -20 to 60 °C ± 0.8 °C Ideal for HVAC/R technicians, electricians, research, industrial process and quality control
display of T1, T2, T1 - T2, plus .
relative time stamp
B Dual inputs‑for easy super-heat and
sub-cool temperature measurements
B Deluxe hard carrying case, 2 Type K probes
SPECIFICATIONS
B Accepts Type J, K, T, R, S, E
thermocouple inputs
B RS232 output with optional cable
and software, TM-SWA
Infrared Thermometer
A quick and effective diagnostic tool for identifying problems in a wide variety of
applications like HVAC/R, fire safety and protection, industrial, maintenance, automotive.
IR608A IR Thermometer Laser Pointer
RANGE
ACCURACY
Type K
-200 °C to 1370 °C
(0.1 % rdg + 0.7 °C)
B Laser
B Fast
Type J
-200 °C to 760 °C
(0.1 % rdg + 0.7 °C)
B “Pistol
B 8:1
Type T
-200 °C to 390 °C
(0.1 % rdg + 0.7 °C)
0 °C to 1760 °C
(0.3 % rdg + 0.7 °C)
-200 °C to 736 °C
(0.3 % rdg + 0.7 °C)
Type R & S
Type E
TM45A Type K single input thermometer
Ideal for HVAC/R contractor, plant maintenance, commercial building service
B Unique,
B °C/°F
B Small,
mini-stick design thermometer
go-anywhere size
B Type K thermocouple compatible
B Data
and 1°/0.1° selectable
and max hold
B Type K probe and carrying case included
ENVIRONMENTAL TESTERS
B Triple
pointer for easy targeting
grip design” for easy reading
B Display Hold
B Backlit display
response time
Field of view
B Fixed emissivity at 0.95
IR610A IR Thermometer
B Laser
B Data
B Measures
B Fixed
pointer for accurate targeting
to 260 °C front panel switchable
B Narrow 10:1 field of view measures 25 mm at .25 m
distance
B Large 3-1/2 digit display with backlight
Hold, low battery indicator
emissivity at 0.95
B Rugged Valox® case
B Shipped with carrying case
and batteries
Surface Probe
TPP1-C1 Immersion probe pocket thermometer
TPP2-C1 Flat surface probe pocket thermometer
SPECIFICATIONS
B 0.1
Range
B Easy-to-read
Distance to spot size
°C (0.1 °F) resolution
digital display
B Data Hold to freeze display
B Temperature ranges:
-50 °C to 250 °C
B Protective probe sleeve (TPP1 only)
36
For detailed specifications go to www.Amprobe.eu
IR608A
IR610A
-18 °C to 400 °C
-20 °C to 260 °C
8:1 ratio
10:1 ratio
N/A
1 °C
Accuracy
± 2 % of reading or ± 2 °C,
whichever is greater
± 3% of rdg or ± 3 °C
Emissivity
Pre-set 0.95
N/A
Resolution
For detailed specifications go to www.Amprobe.eu
37
Sound Meter
The SM-70 sound meter has been designed for simple noise surveys and sound level checks.
Easy to use for measuring noise in factories, industrial complexes, fire alarms and other alarm
systems, sound system installations. Use the sound level calibrator to calibrate microphones and
the SM-70 sound meter.
B Measuring
B Frequency
B A
level range from 35 dB to 130 dB
and C weightings for checking .
compliance with safety regulations as well as
acoustic analysis
B Slow
ENVIRONMENTAL TESTERS
SM-70 Sound Meter
range 31.5 Hz – 8 kHz
(1 sec) and fast (125ms) response
settings to check peak and average .
noise levels
Ultrasonic Leak Detection
OPTIONAL ACCESSORIES
When leaks occur they often generate an ultrasonic frequency that is beyond human hearing.
These units convert the sounds into an auduble range for easy detection. The ULD-300 tests
pressurized air lines, refrigeration systems, steam lines for leaks. Check for door or trunk seals,
windshield leaks. Quickly and easily locate a leak
location with this unique device.
ULD-300 Ultrasonic Leak Detector
B Locates
arcing in an electrical system
B Useful in finding the ends of
buried PVC pipes
B Includes:
-Parabola to reduce background noise
-Extension tube to access difficult or
dangerous areas
B Detects any pressurized gas leak
regardless of type CFC’s, HFC’s,
Nitrogen, etc. (non-combustible gas)
In areas where leaking gases are not sufficiently pressurized, there is no ultrasonic sound for
detection. The area can be pressurized with the ultrasonic sound waves created by Amprobe's
UT-300 Ultrasonic Transmitter. This will allow the detection of cracks which would not normally
be possible.
TMULD-300 Ultrasonic Leak Detector Kit
(Set of ULD-300 with UT-300 Transmitter)
features as ULD-300
transmitter
B Transmitter “pressurizes” area with
ultrasonic sound enabling the ULD
300 to pinpoint leaks (used in
areas where gas is not
sufficiently pressurized)
B Applications include air
tightness of cars or houses
CAL-SM Sound level calibrator
B Two fixed output levels of 94 dB and 114 dB
B Output frequency of 100Hz
PART NUMBER
CAL-SM
Light Meter
Compact, rugged, and simple to use, our light meters display light levels quickly and accurately in
both foot-candles or lux. They quickly define the amount of light radiating from a source or
measure the amount of light energy illuminating an object or field. Light meters can help to
reduce the amount of waste light used in the office or home, measure light pollution outdoors,
and ensure proper light levels for work areas.
LM-80 Digital Light Meter
B Dual measurement capability in
Foot-Candles or Lux
B Measures from 0.01 to 20,000
Foot-Candles or Lux
B Measurement ranges of 20/ 200/
2000/ 20,000 fc or Lux
B Analog DC Voltage output to operate
with a Chart Recorder or Data Logger
B Measuring rate of 2.0 times/sec
B Data and Peak Hold features
B Cosine corrected for the angular
incidence of light (C.I.E sensitivity adjustment
to photo optic curve)
B Accuracy: ‹10,000 lux/fc range ± 3%
of reading ± 0.5% full scale
Accuracy: ›10,000 lux/fc range ± 4%
of reading ± 10 digits
B Same
B Includes
38
For detailed specifications go to www.Amprobe.eu
LM631A Digital Light Meter
B Measures
wide range of light up to 20,000 lux (or fc),
front panel switchable
B Sensor dome has 114 cm (45 in) attached cord
B Built-in CIE spectrum curve for accurate human eye response
B Peak Hold and Data Hold
B Large 3-1/2 digit display with backlight
B Rugged Valox® case
For detailed specifications go to www.Amprobe.eu
39
Sound Meter
The SM-70 sound meter has been designed for simple noise surveys and sound level checks.
Easy to use for measuring noise in factories, industrial complexes, fire alarms and other alarm
systems, sound system installations. Use the sound level calibrator to calibrate microphones and
the SM-70 sound meter.
B Measuring
B Frequency
B A
level range from 35 dB to 130 dB
and C weightings for checking .
compliance with safety regulations as well as
acoustic analysis
B Slow
ENVIRONMENTAL TESTERS
SM-70 Sound Meter
range 31.5 Hz – 8 kHz
(1 sec) and fast (125ms) response
settings to check peak and average .
noise levels
Ultrasonic Leak Detection
OPTIONAL ACCESSORIES
When leaks occur they often generate an ultrasonic frequency that is beyond human hearing.
These units convert the sounds into an auduble range for easy detection. The ULD-300 tests
pressurized air lines, refrigeration systems, steam lines for leaks. Check for door or trunk seals,
windshield leaks. Quickly and easily locate a leak
location with this unique device.
ULD-300 Ultrasonic Leak Detector
B Locates
arcing in an electrical system
B Useful in finding the ends of
buried PVC pipes
B Includes:
-Parabola to reduce background noise
-Extension tube to access difficult or
dangerous areas
B Detects any pressurized gas leak
regardless of type CFC’s, HFC’s,
Nitrogen, etc. (non-combustible gas)
In areas where leaking gases are not sufficiently pressurized, there is no ultrasonic sound for
detection. The area can be pressurized with the ultrasonic sound waves created by Amprobe's
UT-300 Ultrasonic Transmitter. This will allow the detection of cracks which would not normally
be possible.
TMULD-300 Ultrasonic Leak Detector Kit
(Set of ULD-300 with UT-300 Transmitter)
features as ULD-300
transmitter
B Transmitter “pressurizes” area with
ultrasonic sound enabling the ULD
300 to pinpoint leaks (used in
areas where gas is not
sufficiently pressurized)
B Applications include air
tightness of cars or houses
CAL-SM Sound level calibrator
B Two fixed output levels of 94 dB and 114 dB
B Output frequency of 100Hz
PART NUMBER
CAL-SM
Light Meter
Compact, rugged, and simple to use, our light meters display light levels quickly and accurately in
both foot-candles or lux. They quickly define the amount of light radiating from a source or
measure the amount of light energy illuminating an object or field. Light meters can help to
reduce the amount of waste light used in the office or home, measure light pollution outdoors,
and ensure proper light levels for work areas.
LM-80 Digital Light Meter
B Dual measurement capability in
Foot-Candles or Lux
B Measures from 0.01 to 20,000
Foot-Candles or Lux
B Measurement ranges of 20/ 200/
2000/ 20,000 fc or Lux
B Analog DC Voltage output to operate
with a Chart Recorder or Data Logger
B Measuring rate of 2.0 times/sec
B Data and Peak Hold features
B Cosine corrected for the angular
incidence of light (C.I.E sensitivity adjustment
to photo optic curve)
B Accuracy: ‹10,000 lux/fc range ± 3%
of reading ± 0.5% full scale
Accuracy: ›10,000 lux/fc range ± 4%
of reading ± 10 digits
B Same
B Includes
38
For detailed specifications go to www.Amprobe.eu
LM631A Digital Light Meter
B Measures
wide range of light up to 20,000 lux (or fc),
front panel switchable
B Sensor dome has 114 cm (45 in) attached cord
B Built-in CIE spectrum curve for accurate human eye response
B Peak Hold and Data Hold
B Large 3-1/2 digit display with backlight
B Rugged Valox® case
For detailed specifications go to www.Amprobe.eu
39
Handheld Component Testers
Function Generators
CR50A Capacitor and Resistor Tester
FG2C-UA, 3 MHz Function Generator
B Measures
Supplies all the basic test waveforms for depot service, design engineering, production or QC.
B Special
“Low Ohms” range
with protective holster, test
leads and threaded alligator clips
B Ships
LCR55A Inductance, Capacitor and Resistor Tester
B Measures
inductance, capacitance,
resistance, transistors, diodes and
microwave diodes
B Wide measurement ranges
FEATURES
hold, max hold and auto-off
with protective holster, test
leads and threaded alligator clips
B Ships
FG3C-UA, 3 MHz Sweep/Function Generator
Provides sine, square, triangle waves and TL or CMOS pulse outputs. With a built-in
frequency counter, this unit is great for heavy day-to-day usage in electronic
troubleshooting, production manufacturing test or as a breadboarding signal source.
CR50A
LCR55A
0.01 Ω - 20 MΩ, ±1.0 %
0.01 Ω - 20 MΩ, ±0.5 %
0.1 pF - 20,000 µF, ±0.5 %
0.1 pF-2000 µF, ±1.0 %
Inductance
N/A
0.1 µH-200 H, ±5.0 %
Transistors
N/A
Hfe, Iceo (NPN, PNP)
Diodes
Yes
Std (3 V) & microwave oven (8 V)
Continuity test
Yes
Yes
COMPONENT TEST / RELAYS
B Square, triangle, sine wave and
TTL/CMOS outputs
B Duty cycle and DC offset control
VCF input
B Data
Capacitance
Resistance
B Fast, easy push-button selection of
square, triangle and sine waves plus TTL
or CMOS pulse output
B Easy push-button selection for power,
range and waveform
B 150
B Linear
B Best
MHz frequency counter
value combination generator and .
counter
B Amplitude or frequency modulation
B Duty
SPECIFICATIONS
and logarithmic sweep modes
cycle, VCF and DC offset control
B Switchable 20 dB attenuator for low
signals
FG3C-UA
FG2C-UA
Frequency Ranges
7 Ranges, 0.3 to 3MHz
7 Ranges, 0.3 to 3MHz
Output Amplitude
20Vp-p open circuit
20Vp-p open circuit
</= 1%, 0.3 to 200kHz
</= 1%, 0.3 to 200kHz
Sine Wave distortion
AM - Depth
AM - Mod. Frequency
Carrier Bandwidth
0-100%
N/A
400Hz (int), DC to 1MHz ext
N/A
100Hz to 3MHz (-3dB)
N/A
0 to +/- 5%
N/A
FM - Deviation
FM - Mod. Frequency
400Hz (int) DC to 20kHz (ext)
N/A
Display
6 digit, 0.3" high LED
Dial Control
Power Supply
115VAC or 230VAC,
60 or 50Hz
115VAC or 230VAC,
60 or 50Hz
BENCHTOP INSTRUMENTS
capacitance and resistance
zero adjustment pots to null
strays and test leads
B Wide measurement ranges
B Dual
Bench Multimeter
BDM40 Benchtop Meter with True-RMS
High resolution and ranges for a low cost makes this benchtop multimeter
ideal for production test, QA test, depost service and university or school labs.
B True-rms,
B Current
B AC
B Resistance
4-1/2 digit, 20,000-count
or AC+DC input coupling
B High accuracy, basic V DC 0.03 %
B Voltage to 1200 V DC, 1000 V AC
40
For detailed specifications go to www.Amprobe.eu
to 20 A
from 20 MΩ
B Interlocking push-button control
B Safety acc. EN 61010, CAT I/1000 V
For detailed specifications go to www.Amprobe.eu
41
Handheld Component Testers
Function Generators
CR50A Capacitor and Resistor Tester
FG2C-UA, 3 MHz Function Generator
B Measures
Supplies all the basic test waveforms for depot service, design engineering, production or QC.
B Special
“Low Ohms” range
with protective holster, test
leads and threaded alligator clips
B Ships
LCR55A Inductance, Capacitor and Resistor Tester
B Measures
inductance, capacitance,
resistance, transistors, diodes and
microwave diodes
B Wide measurement ranges
FEATURES
hold, max hold and auto-off
with protective holster, test
leads and threaded alligator clips
B Ships
FG3C-UA, 3 MHz Sweep/Function Generator
Provides sine, square, triangle waves and TL or CMOS pulse outputs. With a built-in
frequency counter, this unit is great for heavy day-to-day usage in electronic
troubleshooting, production manufacturing test or as a breadboarding signal source.
CR50A
LCR55A
0.01 Ω - 20 MΩ, ±1.0 %
0.01 Ω - 20 MΩ, ±0.5 %
0.1 pF - 20,000 µF, ±0.5 %
0.1 pF-2000 µF, ±1.0 %
Inductance
N/A
0.1 µH-200 H, ±5.0 %
Transistors
N/A
Hfe, Iceo (NPN, PNP)
Diodes
Yes
Std (3 V) & microwave oven (8 V)
Continuity test
Yes
Yes
COMPONENT TEST / RELAYS
B Square, triangle, sine wave and
TTL/CMOS outputs
B Duty cycle and DC offset control
VCF input
B Data
Capacitance
Resistance
B Fast, easy push-button selection of
square, triangle and sine waves plus TTL
or CMOS pulse output
B Easy push-button selection for power,
range and waveform
B 150
B Linear
B Best
MHz frequency counter
value combination generator and .
counter
B Amplitude or frequency modulation
B Duty
SPECIFICATIONS
and logarithmic sweep modes
cycle, VCF and DC offset control
B Switchable 20 dB attenuator for low
signals
FG3C-UA
FG2C-UA
Frequency Ranges
7 Ranges, 0.3 to 3MHz
7 Ranges, 0.3 to 3MHz
Output Amplitude
20Vp-p open circuit
20Vp-p open circuit
</= 1%, 0.3 to 200kHz
</= 1%, 0.3 to 200kHz
Sine Wave distortion
AM - Depth
AM - Mod. Frequency
Carrier Bandwidth
0-100%
N/A
400Hz (int), DC to 1MHz ext
N/A
100Hz to 3MHz (-3dB)
N/A
0 to +/- 5%
N/A
FM - Deviation
FM - Mod. Frequency
400Hz (int) DC to 20kHz (ext)
N/A
Display
6 digit, 0.3" high LED
Dial Control
Power Supply
115VAC or 230VAC,
60 or 50Hz
115VAC or 230VAC,
60 or 50Hz
BENCHTOP INSTRUMENTS
capacitance and resistance
zero adjustment pots to null
strays and test leads
B Wide measurement ranges
B Dual
Bench Multimeter
BDM40 Benchtop Meter with True-RMS
High resolution and ranges for a low cost makes this benchtop multimeter
ideal for production test, QA test, depost service and university or school labs.
B True-rms,
B Current
B AC
B Resistance
4-1/2 digit, 20,000-count
or AC+DC input coupling
B High accuracy, basic V DC 0.03 %
B Voltage to 1200 V DC, 1000 V AC
40
For detailed specifications go to www.Amprobe.eu
to 20 A
from 20 MΩ
B Interlocking push-button control
B Safety acc. EN 61010, CAT I/1000 V
For detailed specifications go to www.Amprobe.eu
41
Accessories, Test leads
Carrying Cases Chart
DL243C
MODEL
DL248C
Same as DL243C plus spring loaded crimp tips
and Red tip length extender
MTL-90B
MTL-90B
DL248C
High quality set of test leads with alligator clips
MTL-500
Test lead kit contains: Double insulated Silicon
Test Leads, Sharp Test Probes and Fully Insulated Alligator Clips
MTL-501
Test lead kit: Double Insulated Silicon Test Leads, Sharp Test Probes Fully
Insulated Alligator Clips, USA Main Socket Test Adapters & Sprung Hook Tips
TL245A
PVC insulated standard test leads, CAT III 1000V rated
MTL-500
TL36A
Test leads with threaded alligator clips
CATIV/600V, CAT III/100V
TL1500
Heavy Duty test leads
CATIV/1000V, 1500V MAX
TL-1500
CC-ACDC
DC250C
DC207C
•
•
•
•
•
•
•
•
•
•
GP-2CC
SV-U
TIC 302CC
TIC 303HV
VC221B
VC3A
VC30A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACCESSORIES
48" long silicone lead wires, probe tips, alligator
clips, spade lugs, carrying case
5XP-A
15XP-A
35XP-A
30XR-A
33XR-A
34XR-A
37XR-A
38XR-A
ACD-6 PRO
ACD-6 PRO-TRMS
ACD-10 PLUS
ACD-10 TRMS-PLUS
ACD-14 FX
ACD-14 TRMS-FX
ACD-15 PRO
ACD-15 TRMS-PRO
ACD-16 PRO
ACD-16 TRMS-PRO
ACD-31P
ACD-41PQ
ACD-56HPQ
ACDC-100
ACDC-100 TRMS
ACDC-620T
ACDC-3000
AM-140 TRMS
AM-150 TRMS
AM-160 TRMS
AMB-45
DGC-1000A
HD110C
HD160C
TIC 300CC
TIC 300HV
PM51A
PM53A
PM55A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Accessories, Carrying Case
TL245A
TL36A
CC-ACDC
SV-U
Soft pouch zippered carrying case
Soft pouch zippered carrying case
CC-DM-III
VC221B
Deluxe Heavy Duty carrying case
Vinyl carrying case
DC205C
VC3A
Deluxe Heavy Duty carrying case
Rugged zippered carrying case
DC207C
VC30A
Deluxe Heavy Duty carrying case with
compartment for current transformer
and extra accessories
Vinyl carrying case
VC3A
DC205C
GP-2CC
Soft pouch zippered carrying case
VC30A
42
For detailed specifications go to www.Amprobe.eu
For detailed specifications go to www.Amprobe.eu
43
Accessories, Test leads
Carrying Cases Chart
DL243C
MODEL
DL248C
Same as DL243C plus spring loaded crimp tips
and Red tip length extender
MTL-90B
MTL-90B
DL248C
High quality set of test leads with alligator clips
MTL-500
Test lead kit contains: Double insulated Silicon
Test Leads, Sharp Test Probes and Fully Insulated Alligator Clips
MTL-501
Test lead kit: Double Insulated Silicon Test Leads, Sharp Test Probes Fully
Insulated Alligator Clips, USA Main Socket Test Adapters & Sprung Hook Tips
TL245A
PVC insulated standard test leads, CAT III 1000V rated
MTL-500
TL36A
Test leads with threaded alligator clips
CATIV/600V, CAT III/100V
TL1500
Heavy Duty test leads
CATIV/1000V, 1500V MAX
TL-1500
CC-ACDC
DC250C
DC207C
•
•
•
•
•
•
•
•
•
•
GP-2CC
SV-U
TIC 302CC
TIC 303HV
VC221B
VC3A
VC30A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACCESSORIES
48" long silicone lead wires, probe tips, alligator
clips, spade lugs, carrying case
5XP-A
15XP-A
35XP-A
30XR-A
33XR-A
34XR-A
37XR-A
38XR-A
ACD-6 PRO
ACD-6 PRO-TRMS
ACD-10 PLUS
ACD-10 TRMS-PLUS
ACD-14 FX
ACD-14 TRMS-FX
ACD-15 PRO
ACD-15 TRMS-PRO
ACD-16 PRO
ACD-16 TRMS-PRO
ACD-31P
ACD-41PQ
ACD-56HPQ
ACDC-100
ACDC-100 TRMS
ACDC-620T
ACDC-3000
AM-140 TRMS
AM-150 TRMS
AM-160 TRMS
AMB-45
DGC-1000A
HD110C
HD160C
TIC 300CC
TIC 300HV
PM51A
PM53A
PM55A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Accessories, Carrying Case
TL245A
TL36A
CC-ACDC
SV-U
Soft pouch zippered carrying case
Soft pouch zippered carrying case
CC-DM-III
VC221B
Deluxe Heavy Duty carrying case
Vinyl carrying case
DC205C
VC3A
Deluxe Heavy Duty carrying case
Rugged zippered carrying case
DC207C
VC30A
Deluxe Heavy Duty carrying case with
compartment for current transformer
and extra accessories
Vinyl carrying case
VC3A
DC205C
GP-2CC
Soft pouch zippered carrying case
VC30A
42
For detailed specifications go to www.Amprobe.eu
For detailed specifications go to www.Amprobe.eu
43
Current Transformers
A-300
Mini Transducer Clamp-on from 1 mA up to 200 A AC
B For
every multimeter with AC Volts input
current measurement without opening the cable
B 3 measuring ranges 1 A/ 10 A /200 A AC
B Max conductor diameter 15 mm
A400, 400A Clamp-On Transformer
B Leakage
B For use with multimeters, oscilloscopes, power recorders
or any instrument with AC milli-volt input (1mVAC per Amp)
B AC Current measurement from 0.1A to 400A
B Measures 50 or 60 Hz current
B Maximum jaw opening 1.18"
ACF-3000AK, 3000A Flexible Current Transformer
Range
Output
voltage
Frequency
range
Accuracy
1 mA ... 1 A AC
1 A ... 10 A AC
10 A ... 200 A AC
1 mV/1 mA
100 mV/1 A
5 mV/1 A
40 - 60 Hz
40 - 5000 Hz
40 - 5000 Hz
± 2 % von
0,1 In bis 1,2 In
max. 3 % of
measured value
B For use with multimeters or any instrument with
AC milli-volt input
B Measures up to 3000 Amps AC
B Connects directly to an instrument
B Flexible head fits all, small conductors and large
bus-bars up to 7" in diameter
B Wide frequency bandwidth (10Hz to 20kHz)
ACCESSORIES
ACF-3000DM-A, ACF-3000SR Available with same features as ACF-3000AK
Temperature Adapter
DKTA-620, Single to dual temperature adapter
B Accessory
for multimeters and clamp-ons with temperature input
single temperature input to a dual temperature
B Computes differential temperature between probes
B Converts
CT235
B AC/DC
current clamp,1000 A (50/10 kHz)
MH101KA, Thermocouple
CT237
B AC/DC
B Master
current clamp, 200 A (50/10 kHz)
B 5:1
CT238
current clamp, 20 A (50/20 kHz)
B Low current version
Current range
Output
Conductor Max
DKTA-620
TP110KA, Temperature Probe
B AC/DC
FEATURE
probe handle for probes
expandable coiled extension wire
B Immersion
B 650
A400
ACF-3000AK
CT235
CT237
CT238
400 A AC
3000 A AC
1000 A AC/C
200 A AC/C
20 A AC/C
mV
mV
mV
mV
mV
30mm
178mm
30mm
19mm
19mm
probe tip
°C
TP120KA, Temperature Probe
B Surface
probe tip
designed to get true surface temperatures
B Specially
B 650
MH101KA
°C
TP130KA, Temperature Probe
CT-600 AC/DC
B Air/gas
B For
B 650
use with multimeters, oscilloscopes, power recorders or any
instrument with AC and DC milli-volt input
B AC or DC Current measurement up to 600A
B Two ranges 100A and 600A (millivolt output respectively 10mV and 1mV
per Amp)
B Wide frequency response 40-400Hz
B Maximum jaw opening 32mm
B Overload protection up to 800A
B Carrying case included
probe tip
designed with radiation sheath
B Specially
°C
TP255A, General purpose Type K probe
B 200
°C
TP254A, Higher-temperature immersion probe
B 1100
°C
TPK-59
TPK-59, Thermocouple
B Accessory
for multimeters and clamp-ons with temperature input
temperature from -46°C to 316°C
B Plugs directly to a meter without additional adapters
B Measures
44
For detailed specifications go to www.Amprobe.eu
For detailed specifications go to www.Amprobe.eu
45
Current Transformers
A-300
Mini Transducer Clamp-on from 1 mA up to 200 A AC
B For
every multimeter with AC Volts input
current measurement without opening the cable
B 3 measuring ranges 1 A/ 10 A /200 A AC
B Max conductor diameter 15 mm
A400, 400A Clamp-On Transformer
B Leakage
B For use with multimeters, oscilloscopes, power recorders
or any instrument with AC milli-volt input (1mVAC per Amp)
B AC Current measurement from 0.1A to 400A
B Measures 50 or 60 Hz current
B Maximum jaw opening 1.18"
ACF-3000AK, 3000A Flexible Current Transformer
Range
Output
voltage
Frequency
range
Accuracy
1 mA ... 1 A AC
1 A ... 10 A AC
10 A ... 200 A AC
1 mV/1 mA
100 mV/1 A
5 mV/1 A
40 - 60 Hz
40 - 5000 Hz
40 - 5000 Hz
± 2 % von
0,1 In bis 1,2 In
max. 3 % of
measured value
B For use with multimeters or any instrument with
AC milli-volt input
B Measures up to 3000 Amps AC
B Connects directly to an instrument
B Flexible head fits all, small conductors and large
bus-bars up to 7" in diameter
B Wide frequency bandwidth (10Hz to 20kHz)
ACCESSORIES
ACF-3000DM-A, ACF-3000SR Available with same features as ACF-3000AK
Temperature Adapter
DKTA-620, Single to dual temperature adapter
B Accessory
for multimeters and clamp-ons with temperature input
single temperature input to a dual temperature
B Computes differential temperature between probes
B Converts
CT235
B AC/DC
current clamp,1000 A (50/10 kHz)
MH101KA, Thermocouple
CT237
B AC/DC
B Master
current clamp, 200 A (50/10 kHz)
B 5:1
CT238
current clamp, 20 A (50/20 kHz)
B Low current version
Current range
Output
Conductor Max
DKTA-620
TP110KA, Temperature Probe
B AC/DC
FEATURE
probe handle for probes
expandable coiled extension wire
B Immersion
B 650
A400
ACF-3000AK
CT235
CT237
CT238
400 A AC
3000 A AC
1000 A AC/C
200 A AC/C
20 A AC/C
mV
mV
mV
mV
mV
30mm
178mm
30mm
19mm
19mm
probe tip
°C
TP120KA, Temperature Probe
B Surface
probe tip
designed to get true surface temperatures
B Specially
B 650
MH101KA
°C
TP130KA, Temperature Probe
CT-600 AC/DC
B Air/gas
B For
B 650
use with multimeters, oscilloscopes, power recorders or any
instrument with AC and DC milli-volt input
B AC or DC Current measurement up to 600A
B Two ranges 100A and 600A (millivolt output respectively 10mV and 1mV
per Amp)
B Wide frequency response 40-400Hz
B Maximum jaw opening 32mm
B Overload protection up to 800A
B Carrying case included
probe tip
designed with radiation sheath
B Specially
°C
TP255A, General purpose Type K probe
B 200
°C
TP254A, Higher-temperature immersion probe
B 1100
°C
TPK-59
TPK-59, Thermocouple
B Accessory
for multimeters and clamp-ons with temperature input
temperature from -46°C to 316°C
B Plugs directly to a meter without additional adapters
B Measures
44
For detailed specifications go to www.Amprobe.eu
For detailed specifications go to www.Amprobe.eu
45
Transfer measurement data to your computer with these kits.
RS-232 KIT1
B Multimeter
download software with connection cable
RS-232 KIT2
B Clamp-on
download software with connection cable
RS-USB, USB to RS-232 Adapter
B Converts
the USB port of a personal computer to the RS-232
Windows 95(OSR2X), 98, 2000, ME, XP Mac 8.6 and higher
B Works with Amprobe instruments with download capabilities
B Works with many other products with USB ports, including
cameras, palm pilot, card readers, mouse, security systems, etc.
B Will free up the serial port for other uses
B Supports
TM-SWA, RS232 Cable and Software
B Allows
for real-time data downloads from TMA10A and TMD90A
two channels simultaneously
B Records
Model
Fuse Part Number
Fuse Type
15XPA
30XR-A
33XR-A 34XR-A 35XPA
37XR-A 38XR-A 5XPA
AM-140
AM-150
AM-160
AM-220
AM-240
AM-3
AMB-1A AMB-2 AMB-45
AU92 CR50 LCR55 DM7B
DM9B HD110C HD160C
FP200
FP160 and FP375
FP100 and FP300
FP100 and FP300
FP200
FP100 and FP500
FP100 and FP500
FP300
FA-6X32/.63 and FA-12.5A/500V
FA-15A/1000V and FA-1A/1000V
FA-15A/1000V and FA-1A/1000V
5X20-250.5
5X20-250.5
8AG361
8AG361
8AG361
FA-0.5A/700V
FP520 and FP540
FP125
FP125
FP450
FP175
FP700
FP700
F2A / 1000V
F10A / 1000V; F0.25A / 700V
F10A / 1000V; F0.315A / 1000V
F10A / 1000V; F0.315A / 1000V
F2A / 1000V
F10A / 1000V; F0.5A / 1000V
F10A / 1000V; F0.5A / 1000V
F0.315A / 1000V
FA-0.63A / 500V; FA-12.5A / 500V
FA-15A / 1000V; FA-1A / 1000V
FA-15A / 1000V; FA-1A / 1000V
F0.5 / 250V
F0.5 / 250V
F1A / 600V
F1A / 600V
F1A / 600V
FA0.5A/700V
F0.5A / 500V; F10A / 500V
F0.1A / 250V
F0.1A / 250V
F0.2A / 600V
F0.5A / 600V
F2A / 1500VDC
F2A / 1500VDC
ACCESSORIES
Product Fuse Directory
Software and Cables
TELARIS Interface Adapter
B IR
to RS-232 interface for Telaris series
Amprobe Software Chart
MODEL
Download ACD
Suite 2.2
Software
16/40
38XR-A
•
ACD-16 Pro
•
ACD
Software
30/31/41
AM
AM
Software
Software
120/130/150 140/160
SuperLink
AMB-45
Software
38-SWA
TM-SWA
es control /
es control
PROF
Visit our website at
www.Amprobe.eu
•
ACD-16 TRMS Pro
ACD-31P
•
ACD-41 PQ
•
AM-140 TRMS
•
AM-150 TRMS
•
AM-160 TRMS
•
AMB-5KVD
•
AMB-45
•
•
•
TMA10A
•
TMD90A
•
Genius 5035
•
TELARIS 0100-PLUS
•
TELARIS RCD-TEST
•
TELARIS LOOP-TEST
•
TELARIS ISO-PRO
•
ALLTEST
•
46
View complete
detailed product
specifications
B Download
data sheets
B Review or download
user manuals
B Read our application
articles
B Review available
accessories
B Identify replacement
fuses
B Download the latest
software for your
Amprobe recording
tool
B Request a catalog for
your friend!
B
For detailed specifications go to www.Amprobe.eu
www.Amprobe.eu
Our web site contains full data sheets with
specifications, application notes, software
downloads, special promotions and much more.
For detailed specifications go to www.Amprobe.eu
47
Transfer measurement data to your computer with these kits.
RS-232 KIT1
B Multimeter
download software with connection cable
RS-232 KIT2
B Clamp-on
download software with connection cable
RS-USB, USB to RS-232 Adapter
B Converts
the USB port of a personal computer to the RS-232
Windows 95(OSR2X), 98, 2000, ME, XP Mac 8.6 and higher
B Works with Amprobe instruments with download capabilities
B Works with many other products with USB ports, including
cameras, palm pilot, card readers, mouse, security systems, etc.
B Will free up the serial port for other uses
B Supports
TM-SWA, RS232 Cable and Software
B Allows
for real-time data downloads from TMA10A and TMD90A
two channels simultaneously
B Records
Model
Fuse Part Number
Fuse Type
15XPA
30XR-A
33XR-A 34XR-A 35XPA
37XR-A 38XR-A 5XPA
AM-140
AM-150
AM-160
AM-220
AM-240
AM-3
AMB-1A AMB-2 AMB-45
AU92 CR50 LCR55 DM7B
DM9B HD110C HD160C
FP200
FP160 and FP375
FP100 and FP300
FP100 and FP300
FP200
FP100 and FP500
FP100 and FP500
FP300
FA-6X32/.63 and FA-12.5A/500V
FA-15A/1000V and FA-1A/1000V
FA-15A/1000V and FA-1A/1000V
5X20-250.5
5X20-250.5
8AG361
8AG361
8AG361
FA-0.5A/700V
FP520 and FP540
FP125
FP125
FP450
FP175
FP700
FP700
F2A / 1000V
F10A / 1000V; F0.25A / 700V
F10A / 1000V; F0.315A / 1000V
F10A / 1000V; F0.315A / 1000V
F2A / 1000V
F10A / 1000V; F0.5A / 1000V
F10A / 1000V; F0.5A / 1000V
F0.315A / 1000V
FA-0.63A / 500V; FA-12.5A / 500V
FA-15A / 1000V; FA-1A / 1000V
FA-15A / 1000V; FA-1A / 1000V
F0.5 / 250V
F0.5 / 250V
F1A / 600V
F1A / 600V
F1A / 600V
FA0.5A/700V
F0.5A / 500V; F10A / 500V
F0.1A / 250V
F0.1A / 250V
F0.2A / 600V
F0.5A / 600V
F2A / 1500VDC
F2A / 1500VDC
ACCESSORIES
Product Fuse Directory
Software and Cables
TELARIS Interface Adapter
B IR
to RS-232 interface for Telaris series
Amprobe Software Chart
MODEL
Download ACD
Suite 2.2
Software
16/40
38XR-A
•
ACD-16 Pro
•
ACD
Software
30/31/41
AM
AM
Software
Software
120/130/150 140/160
SuperLink
AMB-45
Software
38-SWA
TM-SWA
es control /
es control
PROF
Visit our website at
www.Amprobe.eu
•
ACD-16 TRMS Pro
ACD-31P
•
ACD-41 PQ
•
AM-140 TRMS
•
AM-150 TRMS
•
AM-160 TRMS
•
AMB-5KVD
•
AMB-45
•
•
•
TMA10A
•
TMD90A
•
Genius 5035
•
TELARIS 0100-PLUS
•
TELARIS RCD-TEST
•
TELARIS LOOP-TEST
•
TELARIS ISO-PRO
•
ALLTEST
•
46
View complete
detailed product
specifications
B Download
data sheets
B Review or download
user manuals
B Read our application
articles
B Review available
accessories
B Identify replacement
fuses
B Download the latest
software for your
Amprobe recording
tool
B Request a catalog for
your friend!
B
For detailed specifications go to www.Amprobe.eu
www.Amprobe.eu
Our web site contains full data sheets with
specifications, application notes, software
downloads, special promotions and much more.
For detailed specifications go to www.Amprobe.eu
47
Safety Reference Guide
International safety standards
Test equipment must be designed to protect people who work in the high-voltage,
high-current environment. In order to prevent injury the International Electrotechnical
Commission (IEC) develops international general standards for safety of electrical
equipment for measurement, control and laboratory use. The most current standard 61010
specifies overvoltage categories for electrical distribution systems. The Category rating increases
based on the closeness to the power source and a higher level of user protection is required from
test equipment.
Proposed Energy Regions*
CAT I
Electronics, signal level single-phase receptacle loads
CAT III
Three-phase distribution, large building lighting systems, distribution panel devices
CAT II
Appliances, portable tools
CAT IV
Three-phase atutility connection, electricity meters, outside and service entrance
* Category ratings per EN 61010-1. Category boundaries may not be exact.
Starter
480 V panel
Disconnect
Motor
Disconnect
Motor
000124
Adjustable
speed motor
drive
Disconnect
Power .
factor .
correction
capacitors
Transfer
switch
Emergency
generator
Main
switchgear
Utility
power
PDU
Servers
Lighting
Ground
system
Copier
Transformer
CAT IV
48
UPS
CAT III
For detailed specifications go to www.Amprobe.eu
Receptable
CAT II
CAT I
New Product Highlights
Quality
and service
beyond
compare
IR608A
IR Thermometer with laser
The IR608A is an infrared thermometer with a
laser pointer for easy targeting. A quick and
effective diagnostic tool for identifying problems
in a wide variety of applications. The IR608A is
robust yet lightweight with
a solid ergonomic design.
Our Customers
Throughout the past 50 plus
years, the Amprobe® name has
become synonymous with clampon meters, to the point where it
is commonly used as a generic
term for such. Yet the brand has
expanded its product offering
to now over 250 items and has
become an established leader in
quality test equipment for
professionals in the electrical,
maintenance, construction, and
HVAC markets.
Our products
The products shown in this
catalog include an extensive
selection of portable multimeters,
clamp meters, power quality
analyzers, circuit tracers as well
as component checkers, HVAC
testers and specialty tools such
as electrical testers. Also shown
is a complete selection of
accessories.
(For more information turn to page 37)
The products shown in this
catalog are sold and supported by
a worldwide network of
Amprobe distributors and dealers.
Should you require any assistance
or have questions about our
products or their applications,
these local dealers stand ready to
serve you.
Automotive Multimeter
Model AU92 is a full
featured multimeter that has
additional measurement for
automotive servicing.
It offers a built-in
thermometer to measure air,
surface or immersion
temperatures. The meter also
tests engine RPM and dwell in
addition to standard multimeter
features of voltage, current,
resistance and continuity. Perform
accurate RPM measurements for
2- and 4-stroke automotive
engines using the Inductive Pickup
tool. A well designed tool for your
automotive testing needs.
(For more information turn to
page 13)
LH41A
AC/DC Low Current
Clamp Meter
ACD-10 TRMS-PLUS
Clamp on Multimeters with
Unique Thin Jaws
Two models to choose from, one with
True RMS measurements for voltage
and current. These two meters offer
thinner jaws from the standard clamp
meter. Almost a 6 mm thinner for
access into tight spaces. Measures up to
600 A AC. Both measure capacitance,
frequency through the jaws or test
leads. The Data Hold and Max features
allow for In-Rush current capturing.
(For more information turn to page 02)
#
5XP-A.................................................. 12
15XP-A................................................ 12
30XR-A................................................ 11
33XR-A................................................ 11
34XR-A................................................ 10
35XP-A................................................ 12
37XR-A................................................ 10
38XR-A................................................ 10
A
AU92
Our distributors
Index
The compact size of the LH41A
makes it ideal for taking
general measurements on
small conductors. Its excellent
accuracy and resolution of
1 mA offers exceptional
performance at a reasonable
price. The meter offers push
button dc Auto Zero for
accurate measurements. If
you’re working on batterybased systems monitoring of
load current on small and
medium ac and dc loads the
LH41A is an excellent choice.
(For more information
turn to page 07)
AC40B................................................... 2
AC50A................................................... 7
AC68C................................................... 6
AC71B................................................... 6
AC75B................................................... 6
ACD-6 PRO........................................... 4
ACD-6 TRMS-PRO............................... 4
ACD-10 PLUS....................................... 2
ACD-10 TRMS-PLUS............................ 2
ACD-14 PLUS....................................... 3
ACD-14 TRMS-PLUS............................ 3
ACD-15 TRMS-PRO............................. 5
ACD-16 PRO......................................... 7
ACD-16 TRMS-PRO............................. 7
ACD-31P............................................... 9
ACD-41PQ............................................. 9
ACD-56 HPQ......................................... 9
ACD-330T.............................................. 8
ACDC-100............................................. 5
ACDC-100 TRMS.................................. 5
ACDC-400............................................. 3
ACDC-620T........................................... 8
ACDC-3000........................................... 8
ACCESSORIES................................... 42
AD40B................................................... 2
AD105A................................................. 4
ALLTEST............................................. 29
AM-140 TRMS..................................... 16
AM-150 TRMS..................................... 16
AM-160 TRMS..................................... 16
AM-220................................................ 13
AM-240................................................ 13
AM8C................................................... 15
AMB-5KV............................................. 27
AMB-5KVD.......................................... 27
AMB-25................................................ 25
AMB-45................................................ 25
AT-1000............................................... 19
AT-2001............................................... 19
AT-2002............................................... 19
AT-2003............................................... 19
AT-2004............................................... 19
AT-2005............................................... 19
ATGC-1............................................... 19
AU92.................................................... 13
L
LCR55A............................................... 40
LH41A.................................................... 7
LM-80.................................................. 39
LM631A............................................... 39
LP10B.................................................. 31
LP25B.................................................. 31
M
B
BDM40................................................. 41
MT-1000L............................................ 30
Multitest Sigma.................................... 30
C
P
Combi Test 2019................................. 21
CR50A................................................. 40
D
DGC-1000A......................................... 28
Digital Ohm.......................................... 31
DM7C.................................................. 15
DM9C.................................................. 15
DM73C................................................ 13
DM78B................................................. 15
Download Suite................................... 27
E
ECB50A............................................... 20
ENERGYTEST 2020 E........................ 32
ES control............................................ 28
ES control PROF................................. 28
F
FG2C-UA............................................. 41
FG3C-UA............................................. 41
G
Genius 5035........................................ 20
GSC-53A............................................. 34
H
S
SM-70.................................................. 39
T
TDR-400.............................................. 18
TELARIS 0100-PLUS.......................... 22
TELARIS EARTH-TEST...................... 28
TELARIS ISO-PRO............................. 25
TELARIS LOOP-TEST........................ 24
TELARIS RCD-TEST.......................... 23
TH-3..................................................... 37
THWD-3............................................... 37
TM45A................................................. 36
TMA10A............................................... 36
TMD90A.............................................. 36
TMULD-300......................................... 38
TPP1-C1.............................................. 36
TPP2-C1.............................................. 36
U
ULD-300.............................................. 38
HD110C............................................... 17
HD160C............................................... 17
HV231-10A.......................................... 39
I
PM51A................................................. 14
PM53A................................................. 14
PM55A................................................. 14
PQ55A................................................. 32
PRM-3................................................. 31
IR608A................................................. 37
IR610A................................................. 37
ISO-PLUS-A........................................ 26
V
VP-440RT............................................ 30
VP-600SB............................................ 30
VT201A................................................ 30
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to highquality products and
customer service is
demonstrated by our
industry exclusive “No
Hassle” warranty. In the
unlikely event that an
Amprobe Test Tool
requires warranty service,
any of our local dealers
are authorized to replace
it, on the spot.
(note: €500 MSLP limit)
For detailed specifications go to www.Amprobe.eu
49
Amprobe® Test Tools offers a wide range
of devices for testing and measuring
electrical properties in various field
applications. Primary products include
Clamp Meters, Multimeters, Wire Tracers,
Megohmmeters, Environmental and
Voltage & Continuity testers.
www.Amprobe.eu
Our web site contains full data sheets with specifications,
application notes, software downloads, special promotions
and much more.
Amprobe® Test Tools
www.Amprobe.com
[email protected]
Everett, WA 98203 USA
tel: +1-877-AMPROBE (267-7623)
Beha-Amprobe GmbH
In den Engematten 14
79286 Glottertal, Germany
www.Amprobe.eu
[email protected]
Specifications subject to change without notice.
©2007 Amprobe Test Tools.
All rights reserved. Printed in The Netherlands.
09/07 2765603 NP-EN Rev C
Pub_ID: 11284-eng
Test Tools Catalog 2007/2008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement