Wyre Storm | EX-1UTP-IR-100-EDID | EX-1COAX-IR-75 EX-1UTP-IR-100 EX-1UTP-IR-70 EX

EXTENDER
SETS
EX-1COAX-IR-75
EX-1UTP-IR-100
EX-1UTP-IR-70
EX-1UTP-IR-40
EX-2UTP-IR-200
EX-2UTP-IR-50
COMPANY
PROFILE
Wyrestorm is an award-winning
electronics manufacturer passionately
committed to the development
and production of high quality HD
distribution and control products at the
very forefront of digital technology.
We have our own development
laboratories based in Europe and
Shenzhen, China – a key location in
cutting edge technologies considered
widely to be the cradle of new trends
in global electronics.
With a research and development team
ranking among the leading specialists
in the HD distribution industry, our
innovative solutions are often born
from direct industry feedback to ensure
our products, features and services are
perfectly suited to the ever-growing
number of residential and commercial
applications.
Here at Wyrestorm we follow a simple
but all-encompassing philosophy that
colors everything we do: A constant
quest for perfection. We devote all our
energies and resources to the creation
of innovative products and services
that allow the integrator to supply a
superior entertainment experience for
their clients – and do so faster and
more efficiently to maximise budget,
while minimising time on site.
The best way of achieving this is
by talking to and, most importantly,
listing to the industry - encouraging
observations and suggestions
from distributers and integrators
that allow us to provide you with
the most powerful, reliable and
convenient technical solutions you
need to constantly surpass your client
expectations.
INTRODUCTION
TO HD EXTENDER SETS
Wyrestorm extender sets offer the
perfect solution for high spec pointto-point HD distribution with full 3D
support using a variety of distribution
methods to suit any project and budget
for excellent flexibility and control over
virtually any distance.
With full intercompatibility between all
products across the entire Wyrestorm
range, our extenders are the last word
in versatility, allowing distribution to be
tailored to the installation rather than
limited by it.
Our HDBaseT and HDBaseT Lite
classification extenders enable full
HD distribution including RS232
connectivity and wide-band, two-way
IR control of devices over 100m/328ft
and 70m/230ft respectively, with
Ethernet passthrough available on full
HDBaseT models.
For installations where distribution
over much greater distance is a
prerequisite, our HD over Fibre
solutions are capable of full 1080p
@60Hz video and HD audio
transmissions on runs of up to
5km/3.1miles using single mode
optical fibre.
For more conventional HD distribution,
our dual Cat5e/6 extenders also offer
discrete bi-directional IR from source
and display locations over distances
of 50m/164ft or 200m/656ft for larger
commercial applications.
Alternatively, for older, retrofit
installations utilizing existing cabling,
the Wyresotrm Coax extender set offer
1080p HD with wide-band, two-way
IR control over 60m through a single
Coax cable.
EX-1COAX-IR-75 INFORMATION SHEET
The Wyrestorm EX-1COAX-IR-75 is a single cable point to point extender set that uses copper-core 75Ohm
Coax cable as a means of transmitting 1080p HD video@60Hz and multi-channel audio on cable runs up to
60m (197ft), with wide-band, two way IR control from either source or display location.
Key Product Features
• Single Coax cable lenthens 1080p HD video @60Hz and
• HDMI V1.3 supported.
multi channel audio transmissions over distances up to
• Each port supports HDMI or DVI signals.
60m (197ft)
• HDCP compliant.
• Automatically adjusts signal feedback, equalization and
amplification.
• EDID DIP switches on Transmitter and receiver
• LED indicators indicate power and video signal status of
baluns
• Units contain ESD (electrostatic discharge) protection
encourages communication between source/display
technology to guard again static build-up that can
devices to solve compatibility issues
damage circuitry.
Wiring diagram
Extender Set
EX-1COAX-IR-75
• Wide band, two-way IR control of source from display
locations and display from source locations.
• 24bit colour depth.
• Mounting brackets supplied.
• Lockable BNC connectors
• IR receiver, emitter and 5v mains power supply included
• Units can be cascaded
EX-1COAX-IR-75 INFORMATION SHEET
In The Box
1 x Wyrestorm EX-1COAX-IR-75 TRANSMITTER balun
1 x IR TX Emitter (small/round) for attachment to Input
1 x Wyrestorm EX-1COAX-IR RECEIVER balun
device
1 x Printed quickstart installation guide (also downloadable
1 x IR RX Receiver (larger/rectangular) for attachment to
from website)
Display - IR frequency range: 30KHz to 56KHz
2 x pairs of balun mounting brackets
2 x 5VDC power supply
Specifications
*Under perfect transmission conditions including straight cable runs with
no electrical interference, bends, kinks, patch panels, or wall outlets.
EX-1UTP-IR-100 INFORMATION SHEET
The Wyrestorm EX-1UTP-IR-100 is a single cable extender set comprising of Transmitter and Receiver baluns
that utilise HDBT transmission technology to extend uncompressed 1080p HD video @60Hz and HD multichannel audio, high speed internet and control options over distances up to 100m (328ft) via Cat5e/6/7 UTP
cable, regardless of HDCP source encryption.
Key Product Features
• Single cable solution for extension of full HD audio
video, RS232, 2-Way IR and 10/100 Ethernet
• Robust HDBaseT transmission technology far more
• Supports all high definition resolutions: 1080p, 1080i,
720p and screen refresh rates of 24Hz, 30Hz, 50Hz and
60Hz
stable and resistant to electrostatic interference than
• 4k x 2k Resolution applications supported
conventional HD distribution over UTP
• Fully supports 48bit Deep Colour
• HDMI v1.4 with full 3D compatibility - frame sequential
(Blu-Ray) and interlaced Stereoscopic (satellite/cable
broadcasts)
• Uncompressed HD and multi-channel audio
• Automatically adjusts feedback, equalisation and
amplification
Wiring diagram
Extender Set
EX-1UTP-IR-100
• Supports constant HDCP to prevent screen drop-outs
when operating devices
• Control signals can be sent between source device and
display via 2-way IR
• 1080p up to 100m (328ft) range using Cat5e/6/7 UTP
(including 3D applications) - control of source and display
possible from either location
• 10/100 BaseT Ethernet
• Can be cascaded up to 7 times (700m / 2300ft)
• HDCP compliant
• 10.2Gbps bandwidth output capacity
• RS232 compatible with open source drivers/protocols
available for markey leading third party control systems
EX-1UTP-IR-100 INFORMATION SHEET
In The Box
1 x Wyrestorm EX-1UTP-IR-100 TRANSMITTER balun
1 x wide-band IR TX Emitter (small/round) for attachment
1 x Wyrestorm EX-1UTP-IR-100 RECEIVER balun
to Input device
1 x Printed quickstart installation guide (also downloadable
1 x wide-band IR RX Receiver (larger/rectangular) for
from website)
attachment to Display - IR frequency range: 30KHz to
2 x pairs of balun mounting brackets
56KHz
2 x 5VDC power supply P/N_VDC0501
Specifications
*Under perfect transmission conditions including straight cable runs with
no electrical interference, bends, kinks, patch panels, or wall outlets.
EX-1UTP-IR-70 INFORMATION SHEET
The Wyrestorm EX-1UTP-IR-70 uses HDBaseT ‘Lite’ classification technology to sit comfortably between our
PRO range and flagship HDBaseT products to enable the transmission of full, uncompressed HD 1080p video
@60Hz, HD multichannel audio with centralized RS232 and discrete two-way IR control of source and display
from either location over distances of up to 70m (230ft) using a single shielded or unshielded Cat5e/6/7 cable.
Key Product Features
• Extenders capable of 1080p HD @60Hz and HD
multichannel audio transmissions up to 70m (230ft)
under perfect conditions*
• Transmits discrete wide-band two-way IR control signal
for market leading control systems
• Fully supports 3D applications (frame sequential – Blu
ray and Interlaced Stereoscopic – Satellite/cable
broadcasts)
together within the HDMI signal over a single Cat5ei/6/7
• Supports 36bit Deep Colour HDMI V1.4
cable.
• Cable termination follows IEEE-568B standards
• Centralized RS232 for firmware updates or third party
control with open source integration protocols available
• HDCP compliant
• Automatically adjusts feedback, equalization and
Wiring diagram
Extender Set
EX-1UTP-IR-70
amplification of signal for easy installation.
• LED indications for visual power and video signal status.
• Baluns powered by 5v mains adapter or with the 5v
USB power cable (both included) to solve space or power
availability problems as well as being more energy
efficient as the extenders are only powered when
connected devices are turned on.
• Fully cascadable to further lengthen transmission and
increase your distribution capabilities.
EX-1UTP-IR-70 INFORMATION SHEET
In The Box
1 x Wyrestorm EX-1UTP-IR-70 TRANSMITTER balun
1 x IR TX Emitter (small/round) for attachment to Input
1 x Wyrestorm EX-1UTP-IR-70 RECEIVER balun
device
1 x Printed quickstart installation guide (also downloadable
1 x IR RX Receiver (larger/rectangular) for attachment
from website)
to Display - IR frequency range: 940nm IR Frequency:
2 x pairs of balun mounting brackets
38KHZ
2 x 5VDC power supply P/N: VDC0501
2 x USB to 5V power adapters P/N: CAB-USB-5V70
Wyrestorm USB 5V Power Adapters
Extenders can be powered using a USB 5V
cable connected to spare USB ports of inputs
and outputs. These smart little cables not only
solves power availability problems, especially
Specifications
at the display end, it is also far more energy
efficient as extenders are only powered when
devices are turned on.
*Under perfect transmission conditions including straight cable runs with
no electrical interference, bends, kinks, patch panels, or wall outlets.
EX-1UTP-IR-40 INFORMATION SHEET
The Wyrestorm EX-1UTP-IR-40 is a short range single cable extender set capable of transmiting full 1080p
HD video, HD audio and one-way IR source control together through the HDMI signal over a Cat5ei/6/7 cable
distances up to 40m (131ft) under ideal transmission conditions
Key Product Features
• Transmits a wide-band one-way IR control signal
together with the HDMI signal over a single Cat5e/6/7
cable.
• Receivers capable of 1080p transmissions up to 40m
(131ft) under perfect conditions.*
• Automatically adjusts feedback, equalization and
amplification of signal for easy installation.
• For even greater control and fine tuning, each receiver
features a fully adjustable EQ distance range for
optimising the transmission signal.
• Follows IEEE-568B cable termination standards
• Protection against ESD (electrostatic discharge) included
within the unit to further stabilise transmission.
• LED indications for visual power and video signal status.
• Power baluns by 5v mains adapter or with the 5v USB
power cable (both included) to solve space or power
Wiring diagram
Extender Set
EX-1UTP-IR-40
availablility problems as well as being more energy
• DISTANCE ADJUSTMENT on Receiver balun can be
efficient as the extenders are only powered when
further fine-tuned depending on the length of Cat5e/6/7
connected devices are turned on.
cable used for optimum performance.
• Fully cascadable to further lengthen transmission.
• EDID DIP switch on Transmitter to encourage EDID
communication between sources and displays in the event
of signal transmission difficulties.
EX-1UTP-IR-40 INFORMATION SHEET
In The Box
1 x Wyrestorm EX-1UTP-IR-40 TRANSMITTER balun
1 x IR TX Emitter (small/round) for attachment to Input
1 x Wyrestorm EX-1UTP-IR-40 RECEIVER balun
device
1 x Printed quickstart installation guide (also downloadable
1 x IR RX Receiver (larger/rectangular) for attachment
from website)
to Display - IR frequency range: 940nm IR Frequency:
2 x pairs of balun mounting brackets
38KHZ
2 x 5VDC power supply P/N_VDC0501
2 x USB to 5V power adapters P/N: CAB-USB-5V70
Wyrestorm USB 5V Power Adapters
Extenders can be powered using a USB 5V
cable connected to spare USB ports of inputs
and outputs. These smart little cables not only
solves power availability problems, especially
Specifications
at the display end, it is also far more energy
efficient as extenders are only powered when
devices are turned on.
*Under perfect transmission conditions including straight cable runs with
no electrical interference, bends, kinks, patch panels, or wall outlets.
EX-2UTP-IR-200 INFORMATION SHEET
The WyreStorm EX-2UTP-IR-200 is a long range dual-cable HD extender set that offers an excellent solution for
high spec, affordable, point-to-point HD distribution with excellent flexibility and two-way wide-band IR control
over distances up to 200m (656ft) along two Cat6/7 cables
Key Product Features
• Dual cable UTP lengthens 1080P HD video, HD audio
and multi-channel HD audio transmission over distances
up to 200m (656ft) using Cat6 cable and 150m (492ft)
using Cat5e cable
• Video/audio and IR control signals transmitted separately
on the two cables
amplification
• RS232 connectivity for device control or integration with
a third party control system
• EDID DIP switches on Transmitter and Receiver to
encourage communication between source/display
devices to solve compatibility issues
• Follows IEEE-568B cable termination standards
• HDMI V1.3b supported
• Automatically adjusts signal feedback, equalization and
• Each port supports HDMI or DVI signals
Wiring diagram
Extender Set
EX-2UTP-IR-200
• HDCP compliant
• HDMI ports support both HDMI and DVI signals
• LED indicators indicate power and video signal status of
• 24bit color depth (support for 30bit color with ‘Deep
baluns
• Units contain ESD (electrostatic discharge) protection
Colour Mode’ activated in product DIP settings)
• 12v power to baluns provided by mains adapter (included)
technology to guard again static build-up that can
• Mounting brackets supplied
damage circuitry
• Fully cascadable to create larger distributions
• Wide band, two-way IR control of source from display
locations and display from source locations
• 1080p HD video and HD Audio including Full support of
3D applications - frame sequential (Blu ray) and
Interlaced stereoscopic (satellite/cable 3D broadcasts)
• IR receiver, emitter and 5v mains power supply included
EX-2UTP-IR-200 INFORMATION SHEET
In The Box
1 x Wyrestorm EX-2UTP-IR-200 TRANSMITTER balun
device
1 x Wyrestorm EX-2UTP-IR-200 RECEIVER balun
1 x IR RX Receiver (larger/rectangular) for attachment to
1 x Printed quickstart installation guide (also downloadable
Display - IR frequency range: 30KHz to 56KHz
from website)
2 x pairs of balun mounting brackets
2 x 12V DC power supply
1 x IR TX Emitter (small/round) for attachment to Input
Specifications
24bit color (30bit in ‘Deep Color Mode’)
*Under perfect transmission conditions including straight cable runs with
no electrical interference, bends, kinks, patch panels, or wall outlets.
EX-2UTP-IR-50 INFORMATION SHEET
The WyreStorm EX-2UTP-IR-50 is a dual-cable HD extender set that offers the perfect solution for high spec,
affordable, point-to-point HD distribution with excellent flexibility and two-way IR control over distances up to
50m (164ft) along two Cat5e/6/7.
Key Product Features
• Dual cable Cat5e/6 lengthens 1080P HD video and HD
audio transmission over distances up to 50m (164ft)
• Video/audio and IR control signals transmitted separately
on the two cables.
encourage communication between source/display
devices to solve compatibility issues.
• HDMI V1.3b supported.
• Each port supports HDMI or DVI signals.
• Follows IEEE-668B cable termination standards.
• HDCP compliant.
• Automatically adjusts signal feedback, equalization and
• LED indicators indicate power and video signal status of
amplification.
• EDID DIP switches on Transmitter and Receiver to
baluns
• Units contain ESD (electrostatic discharge) protection
Wiring diagram
Extender Set
EX-2UTP-IR-50.
technology to guard again static build-up that can
damage circuitry.
• Wide band, two-way IR control of source from display
locations and display from source locations.
• 1080p HD video and HD Audio including Full support of
3D applications - frame sequential (Blu ray) and
Interlaced stereoscopic (satellite/cable 3D broadcasts).
• HDMI ports support both HDMI and DVI signals
24bit colour depth.
• 5v power to baluns provided by mains adapter (included
or optional USB 5v cable for ease of power management
and greater energy efficiency.
• Mounting brackets supplied.
• Fully cascadable to create larger distributions
IR receiver, emitter and 5v mains power supply included
EX-2UTP-IR-50 INFORMATION SHEET
In The Box
1 x Wyrestorm EX-2UTP-IR-50 TRANSMITTER balun
1 x IR TX Emitter (small/round) for attachment to Input
1 x Wyrestorm EX-2UTP-IR-50 RECEIVER balun
device
1 x Printed quickstart installation guide (also downloadable
1 x IR RX Receiver (larger/rectangular) for attachment to
from website)
Display - IR frequency range: 30KHz to 56KHz
2 x pairs of balun mounting brackets
2 x 5VDC power supply P/N_VDC0501 (optional USB 5V
power adapters available. See accessories section)
Wyrestorm USB 5V Power Adapters
Extenders can be powered using a USB 5V
cable connected to spare USB ports of inputs
and outputs. These smart little cables not only
solves power availability problems, especially
Specifications
at the display end, it is also far more energy
efficient as extenders are only powered when
devices are turned on.
*Under perfect transmission conditions including straight cable runs with
no electrical interference, bends, kinks, patch panels, or wall outlets.
Contact Details:
Wyrestorm Technologies LLC, 6991 Appling Farms Parkway, Suite 104, Memphis, TN, 38133
Tel: +901 384 3575 Fax: +901 384 3574
Wyrestorm Technologies Europe Ltd
22 Ergo Business Park, Kelvin Road, Greenbridge, Swindon, SN3 3JW, UK
Tel: +44 (0) 1793 230 343 Fax: + 44 (0) 1793 230 583
Email: sales@wyrestorm.eu
www.wyrestorm.com
Download PDF