ATSC | Digital TV Receiver Box | ATSC DIGITAL TV TUNER RECEIVER User`s

ATSC DIGITAL TV TUNER RECEIVER
User’s Manual
1
TABLE OF CONTENTS
Table of Contents………………………..…………………….…………….………………………..1
Safety Information…………………………….……………………………….………………………2
Wire Connection……………...…………………..…………………..……………………………….2
Remote Control…………………………………………………………………………………..……3
Menu Operations…………………………………………….…….….………………………………6
Special Features……………………………………………….…………..…..……………………15
NOTE:
This user's manual is only for reference.
Modifying rights are reserved.
Specifications are subject to change without notice.
SAFETY INFORMATION
Always be careful when using your product. To reduce the risk of fire, electrical shocks, and
other injuries, keep these safety precautions in mind when installing, using, and maintaining
your machine.
z
Be sure to read this user’s manual before starting your operation.
z
Never open the cover. It is very dangerous to touch the inside of the unit due to possible
electric shock.
z
Place the unit in a well ventilated and no heat environment.
z
Install the unit horizontally. Unbalanced installation may cause the unit to be damaged.
z
When the unit is suddenly moved to a hot area from a cold area, it may cause problems.
In that case, turn off the power, and turn on after 1-2 hours.
z
Install the unit in a place with: good ventilation, suitable temperature, no direct sunrays,
low humidity, and low vibration influence.
z
Do not put heavy objects on the unit.
WIRE CONNECTION
REMOTE CONTROL
1. MUTE
2. NUMBER BUTTONS
3. MENU
4. CH+ / UP
5. LEFT / VOL6. ENTER
7. GUIDE
8. DOWN / CH9. FAV.SET
10. PRG.L
11. AUDIO
12. CC
13.EXIT
14. RIGHT / VOL+
NOTE:
This is a universal remote for head unit too.
15. FAV.L
16. INFO
17. RETURN
18. 19. RECALL
20. FORMAT
1. MUTE
Press to switch off the sound; press it again to resume to the previous volume level.
2. NUMBER BUTTONS / 18. Press to input the channel number.
3. MENU
Press to display the Main Menu on the screen.
4. CH+ / UP / 8. CH- / DOWN
When Main Menu is not on screen, press to select channel.
When Main Menu is on screen, press to move cursor up/down.
5. LEFT / VOL- / 14. RIGHT / VOL+
When Main Menu is not on screen, press to adjust TV volume.
When Main Menu is on screen, execute the selected item in the menu, or confirm the desired
value in input mode.
6. ENTER
Press to confirm the selection.
7. GUIDE
Press to display the on-screen Electronic Program Guide (EPG).
9. FAV.SET
Press to switch up/down current channel set in favorite channel list.
10. PRG.L
Press to display the all channels list.
11. AUDIO
Press to change the current audio language.
12. CC
Press to turn CC on or off.
13.EXIT
Press to exit the menu directly.
15. FAV.L
Press to display the favorite channel list for setting.
16. INFO
Press to show information of the current channel.
17. RETURN
Press to return to previous menu page.
19. RECALL
Return to previous program.
20. FORMAT
Press to switch the screen size between NORMAL – 16:9 – 4:3.
MENU OPERATIONS
Press MENU key to display the main menu.
It consists of six items as following:
· Auto Search
· CH Setup
· CC Setup
· EAS Setup
· Parental Control
· System Setup
Figure 1
Use UP/DOWN keys to move up and down from
one item to another , and press RIGHT key to
display corresponding sub-menu.
Example:
In the Main menu, use UP/DOWN keys to select
Auto Search item, and press RIGHT key to
enter into Auto Search menu.
Figure 2
NOTE:
In any page of the menu, you can use RETURN key to return to previous menu page; or use
MENU key switch to Main Menu page and then use MENU key again to exit Main Menu; or
use EXIT key to exit Main Menu directly.
1.
Auto Search
We suggest searching the TV program by
using the auto search function in Auto Search
menu for first use.
1> Use UP/DOWN keys to select Auto Search
item in Main menu, you will see the menu
as Figure 2.
2> Press RIGHT key to enter the Auto
Searching window (Figure 3). System will
search channels automatically.
After searching, the searched channels will be added
to channel list and system will turn to full-screen mode
to view first searched program automatically.
Figure 3
During the searching, you can press LEFT key
to stop. When auto searching is completed or
stopped, you will see the information as
Figure 4
Also, you can press EXIT key to exit auto
searching mode.
Figure 4
2.
CH Setup
In Main menu, select CH Setup item and press
RIGHT key to enter into Channel Setup menu
(Figure 5).
·Skip / unskip a channel
If you want to skip a channel, you should use
this menu and do the following two steps:
1> Use UP/DOWN key to select Channel item,
then press RIGHT key to select the channel
backward or forward that you want to skip.
Figure 5
2> Use UP/DOWN key to select the Skip item in
Channel Setup menu and press RIGHT key to skip
current selected channel or not.
Favorite list
In the Remote control unit, you can press FAV key to set your favorite channels.
1> Press FAV.L key to enter into Favorite
List (Figure 6).
2> You can set maximum five favorite
channels, use UP/DOWN key to
moving up/down the highlight item, use
RIGHT to select the particular channel.
After you set the favorite channel list and exit
the favorite list window, you can press RDM
key to jump into favorite channel and change
current channel up or down set in favorite list.
Figure 6
3.
CC Setup
In Main menu, select CC Setup item and press
RIGHT key to enter into Closed Captioning
Setup. (CC608/CC708).
1> Use UP/DOWN key to select CC Setup
item in main menu ,and press RIGHT key
to enter into CC Setup menu (Figure7).
2> Use UP/DOWN key to select a sub item,
and press RIGHT key to change current
item setting.
If you don’t want to display the CC when
viewing the program , you can set CC Display Off.
Figure 7
If you don’t want to change the CC style of
current program, you can set CC Mode to
Broadcast mode as Figure 7. When CC Mode
is Broadcast, CC Customer is grayed-out and
cannot be edited.
The default value about CC setup menu is
following:
CC Display:
On;
608CC Type: C1;
708CC Type: Service 1;
CC Mode:
Broadcast;
Figure 8
You can set CC style as you like as following:
1> Use UP/DOWN key to select CC Mode
item in CC Setup menu(Figure 8) and
press RIGHT key to set CC Mode to
Customer;
2> Use UP/DOWN key to select CC Customer
item in CC Setup menu (Figure 8), then
press RIGHT key to enter into CC
Customer sub menu (Figure 9)
3> In CC Customer menu, you can use
UP/DOWN key to select sub item and use
RIGHT key to change setting.
Figure 9
Some important things about 608CC/708CC
1> If you set CC Display On, and the program has CC608 and CC708 at the same time, CC
708 display is higher priority than the CC608 display.
2> If you have not set the 608CC and 708CC type to proper setting, the CC will not be
displayed even the current program contains CC information.
3> You can’t change CC608 style, such as font, color, or others.
CC Option List
Item
CC Size
CC Font
CC Opacity
CC color
Font Edge color
Font Edge type
Background color
Background
opacity
4.
Option
Small, Standard, Large
Font0, Font1, Font2, Font3, Font4, Font5, Font6, Font7
Solid, Trnsl, and Trnsp
Black, White, Red, Green, Blue, Yellow, Magenta, and
Cyan
Black, Gray, Red , Green , Blue , Yellow , Navy and
Dark Gray
None, Raised, Depressed, Outline, L.Shadow and
R.Shadow
Black, Gray, Dark Gray, Red, Navy, Green, Blue and
Yellow
Solid, Transparent
EAS Setup
The system can display EAS (Emergency Alert
System) message broadcast pursuant to
47CFR11.117 of the FCC Rules.
1>
2>
In main menu(Figure 1), use UP/DOWN
key to select EAS Setup item and press
RIGHT key to enter into EAS Setup menu.
Use UP/DOWN key to select EAS level
and change the current setting.
There are three setting: Always, Skip low priority
and Skip low/medium priority. The default setting is Always.
Figure 10
Default
Standard
Font1
Solid
White
Black
None
Black
Solid
5. Parental Control
Before entering Parental Control menu, you
need to input password in order to prohibit from
the child to change any settings on the Parental
Control.
How to enter into Parental Control menu
1> In main menu(Figure 1), use UP/DOWN key
to select Parental Control item and press
RIGHT key to enter into Parental Control
password input page(Figure 11).
2> Input the password by pressing digital number key
Figure 11
(default password is : 0000). If password is invalid,
input numbers are cleared and you need to input password again; when password is valid,
Parental Control menu will be displayed automatically (Figure 12).
About Parental Control menu
1> Enter into Parental Control menu (Figure
12) ;
2> Use UP/DOWN key to select sub item and
use RIGHT key to enter into sub menu or
change current item setting.
This menu you can set as following:
·V-chip Setting;
·RRT Setting;
·Block Enable;
·Unrated;
·Change Password;
Figure 12
·V-chip setting
1> Select V-chip Setting item in Parental
Control menu(Figure 12) and press RIGHT
key to enter into V-chip setting menu(Figure
13).
2> Use UP/DOWN key to select sub item and
press RIGHT key to enter into sub menu.
V-chip Rating includes the following rating level:
·Movie rating
·USA TV Content rating
·Canada English rating
·Canada French rating
Figure 13
Example:
How to set Movie ratings;
1> Select Movie ratings item in V-chip Setting
menu(Figure 13) and press OK key to enter
into Movie ratings menu(Figure 14);
2> Press UP/DOWN key to select sub item;
3> Press ENTER key to set view or block,
default setting is view;
- VIEW
- BLOCK
Figure 14
Instruction:
1> Blocking one rating will affect all the higher
ratings. For example, blocking “R”, and the
above rating “NC-17” and “X” will
automatically block, no matter the previous
state of these ratings was. If a password is
defined while a TV program rating is
received from the current channel, then
sound will be muted and the following
message is displayed on the center of
screen. The rating information should be
consistent with current program rating.
2> Using the same way to set USA TV Content /
Canada English / Canada French ratings.
Figure 15
·Change Password
1> Select Change Password item in Parental
Control menu (Figure 12) and press RIGHT
key to enter into Change Password menu
(Figure 16).
2> Input the new password , after that, the
system will require you to confirm the new
password as Figure 17
3> Confirmed the password, if success, you will
get the message as Figure 18
Figure 16
Figure 17
Figure 18
Note: If you want to disable parental control blocking function, you can set “Block
Enable” item to “off”, or if you want to disable this function completely, you could set
“Unrated” item to “off”.
6.
System Setup
In main menu, select System Setup item and
press RIGHT key to enter into System Setup
menu (Figure 19). Press UP/DOWN to select
item and RIGHT key to enter into sub menu or
change current item setting.
1> Reset: Restore system setting parameter to
default setting if you press RIGHT key when
this item is highlighted.
2> Time Setup: Enter into a menu for time setup
Figure 19
3> OSD Language: Set OSD language to English, Spanish or French, default is English.
4> Audio Language: Set audio language to English,
Spanish or French, default is English.
5> RF Output: Select the loop though or Ch3/4 RF output.
6> Screen Type: Set display screen type, default is 4:3.
7> Format: Zoom in or zoom out the picture.
About Time Setup
1> Enter to System menu;
2> Use UP/DOWN key to select Time Setup
item and press RIGHT key to enter into
Time Setup menu(Figure 20);
3> Press UP/DOWN key to select different
item and press RIGHT key to change
setting.
Instruction:
1> The Clock item displays the current
time from programs and you can’t change it.
2> The time zone item can set to Eastern, Samoa,
Hawaii, Alaska, Pacific, Mountain, Central, Atlantic,
Newfoundland, the default is Samoa;
3> The Daylight saving switch, and default value is off.
Figure 20
SPECIAL FEATURES
1.
Channels List
1> Press PRG.L key when TV is showing no
menu, the channels list will be displayed
(Figure 21), you can get the information
about channel number, channel name, skip
status of all channels.
2> Press UP/DOWN key to select item and
Press RIGHT key to switch current channel
to your selected channel.
Figure 21
2. Electronic Program Guide
1> Press FAV.SET key to open the EPG
window, it displays the first page of program
scheduler;
2> Press RIGHT key to switch the next
page in program scheduler.
3> Press LEFT key to switch the previous
page in program scheduler.
F
Figure 22
3.
Channel information
Press INFO key to get the information of current
channel. All the information is following:
[1] Channel number: current channel number.
[2] Channel name: current channel name.
[3] Picture size: current picture
[4] System time: current time of day
information.
[5] Program name: current program name.
[6] Program time: time duration of current
program.
[7] Audio language: current language in the
program
[8] CC&CS: current status of CC
[9] V-chip Info: current program V-chip information.
Figure 23
15
4.
Audio Language
Press AUDIO key to set audio language of the
current program.
If the program contains several audio
languages, you can switch the audio language
between these languages by pressing AUDIO
key. The system can display the full language
name of English, Spanish, French, German,
Italian, Japanese, Chinese, Korean, but others
just only use the front three letters of language
name instead of the full name.
Figure 24
Set default audio language:
You can set the default audio language in
menu:
1> Press MENU key to enter into main menu;
2> Select System Setup item and press
RIGHT key to enter into System Setup
menu;
3> Use UP/DOWN key to select Audio
Language item and press RIGHT key to
change setting.
Figure 25
Download PDF