Sena | SPH10S | Specifications | Sena SPH10S Specifications

SPH10S
Bluetooth® Stereo Headset & Intercom
63+6
Š
%OXHWRRWK 6WHUHR+HDGVHW,QWHUFRP
6(1$
ZZZVHQDEOXHWRRWKFRP
www.senabluetooth.com
8VHUV*XLGHY
Users Guide
SPH10S
CONTENTS
INTRODUCTION
PACKAGE CONTENTS
INSTALLING THE SPH10S ON YOUR HELMET
POWERING ON/OFF AND CHARGING
• Powering On
• Powering Off
• Charging
• Low Battery Warning
PAIRING THE SPH10S WITH BLUETOOTH DEVICES
• Mobile Phone Pairing
• Bluetooth MP3 Player Pairing
PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
• A2DP Stereo Music Only
• HFP for Phone Call Only
PAIRING WITH OTHER SPH10S HEADSETS FOR INTERCOM CONVERSATION
USING THE SPH10S
• Volume Adjustment
• Mobile Phone Call Making and Answering
• Enabling/Disabling Voice Activated Phone Answering (Factory Default: Disabled)
• Intercom Conversation
• 3-Way Conference Intercom
• Terminating Conference Intercom
• Enabling/Disabling Voice Activated Intercom (Factory Default: Disabled)
• Intercom Failure
3
4
5
6
6
6
6
6
7
7
7
8
8
8
9
11
11
11
11
12
13
14
14
15
• Intercom Reconnection
• Stereo Music
• Function Priority
• Reset to Factory Default Settings
• Fault Reset
FIRMWARE UPGRADE
OPERATION QUICK REFERENCE
BATTERY INFOFMATION
MAINTENANCE AND CARE
DISPOSAL
CERTIFICATION AND SAFETY APPROVALS
• FCC Compliance Statement
• FCC RF Exposure Statement
• FCC Caution
• CE Declaration of Conformity
• Bluetooth License
WAIVER AND GENERAL RELEASE
• Two-Year Limited Warranty
• Limitation of Liability
• Return for Full Refund
WARNING
15
16
17
17
18
19
19
20
21
22
22
22
23
23
23
23
24
26
27
27
28
SPH10S
INTRODUCTION
The SPH10S features:
• Bluetooth hands-free for Bluetooth mobile phones
• Bluetooth stereo headset for Bluetooth audio devices such as
Thank you for choosing the SENA SPH10S, Bluetooth Headset
MP3 players
& Intercom designed for snow sports helmets. With the SPH10S,
• Bluetooth Intercom up to 900 meters (980 yards)*
you can call hands-free on your Bluetooth mobile phone, listen
• 3-Way Conference Intercom
to stereo music and have intercom conversations in full duplex
• Stereo music by 3.5mm audio cable
with other SPH10S users.
• Firmware Upgradeable
The SPH10S is compliant with the Bluetooth Specification
v2.1+EDR supporting the following profiles: Headset Profile,
Key Specifications:
Hands-Free Profile (HFP), Advanced Audio Distribution Profile
• Bluetooth v2.1+EDR, Class1 Supporting profiles: Headset
(A2DP), and Audio Video Remote Control Profile (AVRCP).
Profile, Hand-Free Profile (HFP), Advanced Audio Distribution
Please check with the manufacturers of other devices to
Profile (A2DP), Audio Video Remote Control Profile (AVRCP)
determine their compatibility with this headset.
Please read this user’s guide carefully before using the headset.
Also check www.senabluetooth.com for the latest version of the
user’s guide and additional information related to SENA
Bluetooth products.
-------------------------------*in open terrain
3
SPH10S
PACKAGE CONTENTS
• SPH10S Headset
Speakers
Status LED
Jog Dial
• Start and End an Intercom Conversation
• Volume adjustment by rotating
• Play and Pause Bluetooth MP3 player
• Track-forward and Track-back by rotating while
pressing the button
• Entering into Intercom Pairing Mode
• Entering into Voice Activated Intercom Setting Mode
• Reject an incoming mobile phone call
• Call Transfer
Phone Button
• Making and Answering a mobile phone call
• Entering into Mobile Phone Pairing Mode
• Entering into Bluetooth Audio Device Pairing Mode (MP3)
< Right side >
DC Power Charging &
< Left side >
• Entering into Voice Activated Phone Answering
Setting Mode
• Activate mobile phone voice command
Firmware Upgrade Port
MP3 Jack
4
Microphone
SPH10S
• USB Power Cable
• Stereo Audio Cable
INSTALLING THE SPH10S ON
YOUR HELMET
1. Remove the original ear flaps of your helmet and insert the
• Quick Start Guide
plastic plate of SPH10S into where the ear flaps are removed
in the helmet.
• Warranty Sheet
2. Please make sure that one of headset ear flaps with the
microphone is located to the left side of your helmet.
3. Put the wire connected with ear flaps into the rear part of
you helmet.
5
SPH10S
POWERING ON/OFF AND CHARGING
the headset is fully charged. It takes about 2.5 hours to be
completely charged.
To power on and off the headset, you don’t need to press and
• Low Battery Warning
hold any button for several seconds. Just short press the Jog
When the battery is low, the blinking blue LED in stand-by
Dial and the Phone Button simultaneously, and you will get
mode turns to red and you will hear mid-tone triple beeps.
quick on-and-off convenience.
• Powering On
Press the Jog Dial and the Phone Button at the same time for
about 1 second to power on. The blue LED turns on and you
will hear ascending beeps.
• Powering Off
Just short press the Jog Dial and the Phone Button
simultaneously, you don’t need to press and hold for a few
seconds. The red LED turns on for a while until it turns off
completely and you will hear descending beeps.
• Charging
The LED turns on red while charging, and turns to blue when
6
SPH10S
PAIRING THE SPH10S WITH
BLUETOOTH DEVICES
4. The headset can be paired as Handsfree or Headset.
Handsfree profile is normally recommended for most mobile
phones. If it is paired as Headset, the buttons of the SPH10S
may not work properly.
Before using the SPH10S Bluetooth headset with any of
Bluetooth devices for the first time, you need to do the pairing
• Bluetooth MP3 Player Pairing
operation. It can be paired with Bluetooth mobile phones,
1. The procedure is the same with the procedure of “Mobile
Bluetooth MP3, and with other SPH10S Bluetooth headsets.
Phone Pairing” except the SPH10S must be paired as Stereo
This pairing operation is only required once for each Bluetooth
Headset.
device, and the headset will remain paired with the devices
2. If you use a Bluetooth mobile phone and a Bluetooth
and automatically connects to the paired devices again when
audio device at the same time, please make sure to pair as
they are within range.
Handsfree or as Headset with the mobile phone and to pair
as Stereo Headset with the Bluetooth audio device.
• Mobile Phone Pairing
1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately and
you hear multiple beeps.
2. Search for Bluetooth devices on your mobile phone. The
headset will be listed on your mobile phone as SPH10S. (Some
mobile phone may not ask for the PIN number.)
3. Enter 0000 for the PIN
7
SPH10S
PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
seconds until the LED flashes red and blue alternately and
you hear multiple beeps.
2. Within 2 seconds, tap the Jog Dial again, then the LED
turns to red flashing and the beeps turn to double mid-tone
I f y o u h a v e a M P 3 s t e re o m u s i c p h o n e s u c h a s a
beeps.
Smartphone, sometimes you may need to selectively use
3. Search for Bluetooth devices on your smart phone. The
the SPH10S for A2DP stereo music only or for mobile phone
headset will be listed on your mobile phone as SPH10S.
hands-free only. This instruction is for advanced users who
4. Enter 0000 for the PIN. Some smart phones may not ask
want to pair the SPH10S to their Smartphones only with one
for PIN.
selective profile: A2DP Stereo for music or HFP for phone
call.
• HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5
If it is not the first time to do paring with the mobile phone,
seconds until the LED flashes red and blue alternately and
you have to clear the previous paring list on both devices;
you hear multiple beeps.
the mobile phone and SPH10S. To clear pairing list on
2. Within 2 seconds, tap the Phone Button again, then the
SPH10S, please do factory reset described on the page
LED turns to blue flashing and the beeps turn to multiple
17.To clear pairing list on the mobile phone, please refer to
mid-tone beeps.
the mobile phone manual.
3. Search for Bluetooth devices on your smartphone. The
headset will be listed on your mobile phone as SPH10S.
• A2DP Stereo Music Only
4. Enter 0000 for the PIN. Some smart phones may not ask
1. Turn on the headset and press the Phone Button for 5
for PIN.
8
SPH10S
A
PAIRING WITH OTHER SPH10 HEADSETS
FOR INTERCOM CONVERSATION
B
C
The SPH10S can be paired with up to three other headsets
D
for Bluetooth Intercom conversation.
1. Turn on the two headsets (A and B) that you would like to
pair with each other.
2. Press and hold the Jog Dial of the headset A for 5 seconds
until red LED starts to flash rapidly.
3. Press and hold the Jog Dial of the headset B for 5 seconds
until red LED starts to flash rapidly.
Pairing A & B
5. You can make other pairings between the headset A and
C, and between the headset A and D by following the same
procedure as above. (Headset A is paired with Headset C
and with Headset D)
A
4. Simply tap the Jog Dial of any one of the two headset A or
A
B (It doesn’t matter that you choose A or B) and wait until the
LEDs of both headsets turn to blue and intercom connection
B
C
B
C
is automatically established. (Headset A is paired with
Headset B)
D
D
Pairing A & C
Pairing A & D
6. If a headset has multiple paired headsets for intercom
conversations, the lastly paired headset is set as First
9
SPH10S
Intercom Friend. The older Intercom friend goes to be
Second Intercom Friend, and Third Intercom Friend.
**For example, after the paring procedures as above, the
headset D is the First Intercom Friend of the headset A, the
headset C is the Second Intercom Friend of the headset
A, and the headset B is the Third Intercom Friend of the
headset A.
10
SPH10S
USING THE SPH10
3. To reject a call, tap the Jog Dial while the phone is ringing.
4. To transfer a call between the mobile phone and the
headset, tap the Jog Dial during the phone conversation. You
• Volume Adjustment
will hear a short/long beep when the call is transferred to the
You can easily adjust the volume by rotating the Jog Dial.
phone/headset.
You will hear a beep when the volume reaches maximum or
5. There are several ways to make a phone call:
minimum level. The volume is set and maintained separately
- Enter number on your mobile phone keypad and tap the
at different levels for each function even when you turn off
Phone Button. The call is automatically transferred to the
and on the headset. For example, once you set the mobile
headset.
phone conversation volume, it is not changed even if you
- Tap the Phone Button in stand-by mode to activate the
raise the volume when you hear Bluetooth MP3 music. So you
voice dialing of your mobile phone. For this, the voice
can always maintain preferred optimum volume level for each
dialing feature must be available on the mobile phone.
function.
Refer to your mobile phone manual for further instructions.
- To redial the last number, double tap the Phone Button in
• Mobile Phone Call Making and Answering
stand-by mode.
1. When you have an incoming call, simply tap the Phone
Button to answer the call.
• Enabling/Disabling Voice Activated Phone
2. You can also answer the incoming call by loudly speaking
Answering (Factory Default: Disabled)
any word of your choice if the Voice Activated Phone
If this feature is enabled, you can answer incoming calls by
Answering Function of the SPH10S is enabled. (Refer to the
simply saying a word loudly enough. For example, when you
next section for detail)
hear a series of beeps by an incoming call, you can answer
11
SPH10S
the phone by saying “Hello” or any other word loudly. The
factory default setting is disabled. You can enable or disable
this mode. If this mode is disabled, the only way to answer an
incoming call is to tap the Phone Button.
1. Press and hold the Phone Button for 8 seconds until the
1st Intercom Friend
2nd Intercom Friend
red LED is rapidly flashing. When you do this, after first 5
seconds you press the button, you will see the headset enters
into the Mobile Phone Pairing sequence, but you have to keep
pressing the button for another 3 seconds until the red LED
3rd Intercom Friend
flashes rapidly.
2. To terminate an intercom conversation, single tap the Jog
2. To enable, tap the Phone Button, then the LED shows solid
Dial. Any intercom connection with any Intercom Friend will be
blue for 2 seconds and you will hear double beeps.
terminated by a single tapping. A double or triple tapping will
3. To disable, tap the Jog Dial, then the LED shows solid red
do nothing in this case.
for 2 seconds and you will hear a single beep.
• Intercom Conversation
1. You can start an intercom conversation with any of Intercom
Friends by tapping the Jog Dial: single tapping to intercom
Terminate
with the First Intercom Friend, double tapping with the
3. When you have an incoming phone call during intercom
Second Intercom Friend, and triple tapping with the Third
conversation, you can choose whether to pick up the call or
Intercom Friend.
not after you hear the ring tone.
12
SPH10S
4. When you have an incoming intercom call during a mobile
1. You (A) need to be paired with two other friends (B & C) for
phone conversation, you will hear high tone 4 beeps. You have
3-way conference intercom.
rin
Pa
i
g
(A)
rin
• 3-Way Conference Intercom
i
Pa
g
to hang up the mobile phone to make an intercom connection.
You (A) could have a 3-way conference intercom with 2
other SMH10 friends (B & C) by establishing two intercom
connections at the same time. While a 3-way conference
First Friend
(B)
Second Friend
(C)
intercom is in progress, mobile phone connection of all three
2. Start an intercom conversation with one of the two friends
participants would be temporarily disconnected, but as
in your intercom group. For example, you (A) may start
soon as the conference intercom terminates or one of the
an intercom conversation with the Intercom Friend (B). Or
participants leaves the intercom, all mobile phones would be
Intercom Friend (B) may start an intercom call with you (A).
automatically reconnected. During the conference intercom,
if you have an incoming mobile phone call, terminate the
conference intercom to automatically reconnect the mobile
(A)
phone and receive the call.
First Friend
(B)
Second Friend
(C)
3. The Second Intercom Friend (C) may join the intercom by
making intercom call to you (A)
13
SPH10S
both of the two active intercom connections: one with (B) and
one with (C).
(A)
2. By single or double tapping the Jog Dial, you can terminate
the intercom connection with one of the two connected
First Friend
(B)
Second Friend
(C)
Intercom Friends accordingly. For example, by single tapping
the Jog Dial, you can just terminate the intercom connection
4. Now you (A) and two SMH10 Intercom Friends (B & C) are
with your First Intercom Friend (B). However, you still have the
having a 3-way conference intercom.
intercom connection with your Second Intercom Friend (C).
• Enabling/Disabling Voice Activated Intercom
(A)
(Factory Default: Disabled)
If this feature is enabled, you can initiate an intercom
First Friend
(B)
Second Friend
(C)
conversation with the last connected Intercom Friend by
speaking any word loudly enough.The most effortless way
• Terminating Conference Intercom
to trigger intercom VOX is to blow into the microphone as
When you are a member of an active conference intercom,
if blowing dust off the microphone. If you start an intercom
you can completely get out of the conference intercom or
conversation by VOX, the intercom terminates automatically
just terminate an intercom connection with one of your active
whenyou and your Intercom Friend remain silent for 20
Intercom Friends.
seconds. However, if you manually start an intercom
1. With a 1 second press-and-hold of the Jog Dial, you can
conversation by tapping the Jog Dial, you have to terminate
get out of the conference intercom completely. It terminates
the intercom conversation manually by tapping the Jog Dial
14
SPH10S
again.
conversation, it is not terminated by 20 seconds of silence.
After turning SPH10S off and on, you can start intercom by
If this feature is disabled, the only way to initiate and terminate
voice again.
an intercom conversation is to tap the Jog Dial.
Tip:
1. Press and hold the Jog Dial for 8 seconds until the red LED
turns on solidly. When you do this, after first 5 seconds you
press the Jog Dial, you will see the headset enters into the
Intercom Pairing sequence, but you have to keep pressing the
Jog Dial for another 3 seconds until the LED turns to solid red.
The Jog Dial is for any kind of Intercom related function, and
the Phone Button is for any functions of mobile phone. With this
reason, as far as intercom function is concerned, the Jog Dial
is used for a positive manner of action such as enabling, and
the Phone Button is for a negative manner of action such as
disabling. Vice versa for the mobile phone functions.
2. To enable, tap the Jog Dial, then the blue LED flashes for 2
seconds and you will hear double beeps.
• Intercom Failure
3. To disable, tap the Phone button, then the red LED flashes
When you try to start an intercom conversation with an
for 2 seconds and you will hear a single beep.
Intercom Friend who is already having a 3-way conference
intercom with other persons or a mobile phone call, you will
However, even when this feature is enabled, if you terminate
hear a low tone double beep signifying a busy signal. In this
intercom conversation manually by tapping the Jog Dial,
case, you have to try again later.
you cannot start intercom by voice temporarily. In this case,
you have to tap the Jog Dial to restart the intercom. This is
• Intercom Reconnection
to prevent repeated unintentional intercom connections by
If your Intercom Friend goes out of range while having
strong wind noise. If you tap the Jog Dial to start intercom
an intercom conversation, you may hear static noise and
15
SPH10S
eventually the intercom will be disconnected. In this case,
2. By Bluetooth Wireless Stereo
the SPH10S automatically tries to reconnect the intercom
The Bluetooth audio device must be paired with the SPH10S
every 8 seconds and you will hear high tone double beeps
by following the Bluetooth Audio Device Pairing instructions
until the intercom is reestablished. If you don’t want to make a
described in the previous chapter. The SPH10S supports
reconnection, tap the Jog Dial to stop the attempt.
the Audio/Video Remote Control Profile (AVRCP), so if your
Bluetooth audio device also supports the AVRCP, you can use
• Stereo Music
the SPH10S to remotely control music playback. So, you may
You can listen to stereo music in either way: with the enclosed
not only adjust the volume but also use the functions such as
stereo audio cable or by Bluetooth wireless stereo.
play, pause, next track and previous track.
1. By Stereo Audio Cable
• To adjust the volume, rotate the Jog Dial.
Plug your stereo MP3 player directly to the SPH10S by using
the enclosed 3.5mm stereo audio jack cable. To adjust the
volume, rotate the Jog Dial on the headset. You may adjust the
volume on the MP3 player also.
• To play or pause music, press and hold the Jog Dial for 1
second until you hear a double beep.
MP3
Jack
16
SPH10S
A lower priority function is always interrupted by a higher
priority function. For example, stereo music is interrupted by
intercom call, and intercom conversation is interrupted by
incoming mobile phone call.
Tip: Stereo Music by Bluetooth or 3.5mm audio cable
• To track forward or track back, rotate while pressing the Jog
Bluetooth music is available only when the MP3 jack port remains
Dial clockwise or counter clockwise.
open. Please make sure the audio cable is unplugged from the
clamp unit to play music by Bluetooth
Tip: Stereo Music by Bluetooth or 3.5mm audio cable
• Reset to Factory Default Settings
1. To restore the SPH10S to factory default settings, press and
hold the Phone Button for 12 seconds until the LED shows
• Function Priority
The SPH10S operates in the following order of priority:
(highest) Mobile phone,
Intercom,
Stereo music by audio cable, and
(lowest) Bluetooth stereo music
solid red and you hear double beeps.
2. Then within 5 seconds, press the Jog Dial to confirm reset.
The headset will be restored to factory setting and switched
off automatically.
3. If you don’t press the Jog Dial within 5 seconds, the reset
attempt is canceled and the headset returns to stand-by
mode.
17
SPH10S
• Fault Reset
Detach
When the SPH10S is not working properly or is in a faulty
status for any reason, you may reset the system by pushing
the pin-hole reset button on the back of the left headset main
unit.
1. Detach the velcro pad inside of the left headset to see a
set-screw on the main module under the ear flap.
4. Insert a paper clip into the reset pin-hole and press the
reset button for 1 second with light pressure, at which time the
SPH10S will be switched off. Turn the SPH10S back on. By
powering back on, this will restore your current settings.
2. Turn the set-screw to the left to take the module apart from
the ear flap.
3. Take out the module from the front of the ear flap to see the
reset pin-hole on the opposite side of the module.
18
SPH10S
FIRMWARE UPGRADE
OPERATION QUICK REFERENCE
The SPH10S supports firmware upgrade function. Please visit
Button
Description
Duration
LED
Beep
SENA Bluetooth web site www.senabluetooth.com to check
Phone Button +
Jog Dial
Power-on
1 sec
Solid blue
Ascending beeps
Power-off
Tapping
Solid red
Descending beeps
Mobile phone
pairing
5 sec
Blue & red
alternatively flashing
High-tone multiple
beeps
MP3, GPS pairing
5 sec
Blue & red
alternatively flashing
High-tone multiple
beeps
Voice activated
phone answering
setting
8 sec
Red flashing
Mid-tone single beep
the latest software downloads.
Phone Button
Factory reset
Phone Button to enable
Jog Dial to disable
12 sec
Solid red
High-tone double
beeps
Jog Dial within 5 sec to confirm reset
Make & answer
phone call
Intercom pairing
Voice activated
Intercom setting
Jog Dial
Tapping
-
-
5 sec
Red flashing
Double-tone beeps
Jog Dial of any one of the two headsets
8 sec
Solid red
Mid-tone single beep
Jog Dial to enable
Phone Button to disable
Start/end intercom
conversation
Tapping
-
-
Reject incoming
call
Tapping
-
-
Call transfer
Tapping
-
High-tone short/long
beep
Volume
adjustment
Rotating
-
-
Track forward/
back
Rotating w/
pressing
-
-
Play/pause
Bluetooth music
1 sec
-
Mid-tone single beep
19
SPH10S
BATTERY INFORMATION
The Product has an internal, non-removable, rechargeable
battery. Do not attempt to remove the battery from the device
as you may damage the device. The battery can be charged
and discharged hundreds of times, but it will eventually wear
out. Recharge the battery only with SENA approved chargers
designated for this device. Use of an unapproved charger may
present a risk of fire, explosion, leakage, or other hazard.
Always try to keep the battery between 15℃ and 25℃ (59℃
and 77℃). Extreme temperatures reduce the capacity and
lifetime of the battery. A device with a hot or cold battery may not
work temporarily. Battery performance is particularly limited in
temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Never use any charger
that is damaged. Operating times are estimates only and
depend on the devices used together, features used, battery
20
age and condition, temperatures to which battery is exposed,
and many other factors.
SPH10S
MAINTENANCE AND CARE
These suggestions apply equally to the headset main unit,
speaker-microphone clamp unit, or power charger.
The Product should be treated with care and the following
suggestions will help you protect your warranty coverage.
1. Do not use or store the device in dusty, dirty areas. Its moving
parts and electronic components can be damaged.
2. Do not store the device in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
wrap or melt certain plastics.
3. Do not store the device in cold areas. When the device returns
to its normal temperature, moisture can form inside the device
and damage electronic circuit boards.
4. Do not attempt to open the Product.
5. Do not drop or knock the device. Rough handling can break
internal circuit boards and fine mechanics.
6. Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
7. Do not paint the device. Paint can clog the moving parts and
prevent proper operation.
21
SPH10S
DISPOSAL
CERTIFICATION AND SAFETY APPROVALS
The crossed-out wheel bin symbol on the product,
• FCC Compliance Statement
literature, or packaging reminds you that all
This device complies with part 15 of the FCC Rules. Operation is
electrical and electronic products, batteries, and
subject to the following two conditions:
accumulators must be taken to separate collection
- This device may not cause harmful interference, and
at the end of their working life. This requirement
- This device must accept any interference received, including
applies to the European Union and other locations where separate
interference that may cause undesired operation.
collection systems are available. To prevent possible harm to the
This equipment has been tested and found to comply with the
environment or human health from uncontrolled waste disposal,
limits for a Class B digital device, pursuant to part 15 of the FCC
please do not dispose of these products as unsorted municipal
Rules. These limits are designed to provide reasonable protection
waste, but hand it in at an official collection point for recycling.
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
22
SPH10S
the following measures:
R&TTE Directive (99/5/EC). Hereby, SENA declares that this
- Reorient or relocate the receiving antenna.
product is in compliance with the essential requirements and other
- Increase the separation between the equipment and receiver.
relevant provisions of Directive 1999/5/EC. For further information
- Connect the equipment into an outlet on a circuit different from
please consult http://www.senabluetooth.com. Please note
that to which the receiver is connected.
that this product uses radio frequency bands not harmonized
- Consult the dealer or an experienced radio/TV technician for
within EU. Within the EU this product is intended to be used in
help.
Austria, Belgium, Denmark, Finland, France, Germany, Greece,
Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain,
• FCC RF Exposure Statement
Sweden, United Kingdom and within EFTA in Iceland, Norway and
The antenna(s) used for this device must be installed to provide
Switzerland.
a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other
• Industry Canada Statement
antenna or transmitter.
This device complies with Industry Canada license-exempt RSS
standard(s).
• FCC Caution
Operation is subject to the following two conditions:
Any changes or modifications to the equipment not expressly
(1) this device may not cause interference, and
approved by the party responsible for compliance could void
(2) this device must accept any interference, including interference
user’s authority to operate the equipment.
that may cause undesired operation of the device.
• CE Declaration of Conformity
• Bluetooth License
This product is CE marked according to the provisions of the
The Bluetooth® word mark and logos are owned by the Bluetooth
23
SPH10S
SIG, Inc. and any use of such marks by SENA is under license.
Other trademarks and trade names are those of their respective
WAIVER AND GENERAL RELEASE
owners
The SPH10S is compliant with and adopts the Bluetooth®
By using the Product you will waive substantial legal rights
Specification 2.1+EDR and has successfully passed all
including the right to sue. Please read the following carefully
interoperability tests that are specified in the Bluetooth®
before using the device. If you do not accept all terms of this
specification. However, interoperability between the device and
agreement, you should immediately return the product for a
other Bluetooth®-enabled products is not guaranteed.
full refund. By using the headset you agree to be bound to this
agreement and forfeit the right to sue. Using a communication
device while riding a motorcycle, scooter, moped, ATV, quadbike or any other vehicle or equipment, whether on land,
water or air (jointly referred to as “Vehicle”) requires your
complete and undivided attention. SENA Technologies, Inc.,
including its Officers, Directors, Affiliates, Parent Company,
Representatives, Agents, Contractors, Sponsors, Employees,
Suppliers and Resellers (jointly referred to as the “Company” or
“SENA”) strongly advises you to take all necessary precautions
and remain alert to the traffic, weather and road conditions
if you choose to use the Product, including all derivative
models irrespective of its commercial name or branding (the
“Device”), and stop your Vehicle on the roadside prior to
24
SPH10S
initiating or receiving calls. Any publications, advertisements,
SENA hereby notifies you that using this Device may also
announcements or similar notes that refer to using the Device
be in contravention to local, federal, state or national laws or
while riding a Vehicle are solely intended to address its
regulations, and that any use of the Device is entirely at your
technical capabilities and should not be misconstrued as
sole risk and responsibility.
if encouraging users to operate the Device while actively
1. You, your heirs, legal representatives, successors or
involved in traffic.
assigns, hereby voluntarily and forever release, discharge,
indemnify and hold harmless SENA from any and all litigation,
By way of purchasing this Device and not returning it for a full
claims, debts, demands, actions and liability which may arise,
refund (see below), you are irrevocably releasing, indemnifying
directly or indirectly, from using the Device for any distress,
from any liability, loss, claim and expense (including attorneys
pain, suffering, discomfort, loss, injury, death, damages to or in
fees) and holding SENA harmless for any bodily injuries,
respect to any person or property however caused, WHETHER
harm or death as well as losses or damages in goods, to any
ARISING FROM THE NEGLIGENCE OR OTHERWISE, and
Vehicles including your own, or to any property or asset that
which may hereafter accrue to you on some future date as a
belong to you or to third parties, any of which may result from
result of said use, to the fullest extent permitted by law.
using the Device under any circumstances or conditions and
2. You fully understand and assume the risks in using the
irrespective of jurisdiction. SENA will not be responsible for
Device, including risk of negligent acts or omissions by others.
any physical damages, irrespective of reasons, conditions or
3. You confirm that you are physically capable to use the
circumstances, including malfunctioning of the Device, and all
Device and that you have no medical conditions or needs that
risks associated with operating it rest solely and entirely with
may infringe upon your abilities to do so in a safe manner.
the user of this Device, irrespective of whether the Device is
You confirm that you are at least eighteen (18) years of age
used by the original purchaser or any third party.
and that you have been advised of the risks associated with
25
SPH10S
the use of the Device. You further confirm that you will not
• Two-Year Limited Warranty
consume any alcohol that may affect your alertness or any
Sena Technologies, Inc. (“SENA”) warrants that this product
mind-altering substance, and will not carry, use or consume
(“Product”) shall conform to and perform in accordance with
these substances before or during the use of the Device.
published technical specifications and the accompanying
4. You fully acknowledge our warnings and understand that:
written materials, and shall be free of defects in materials
(a) risks and dangers exist in using the Device while in traffic,
and workmanship, for a period of two (2) year from the date
including but not limited to injury or illness, strains, fractures,
of purchase by the first consumer purchaser of the Product.
partial and/or total paralysis, death or other ailments that could
The limited warranty extends only to the original consumer
cause serious disability; (b) these risks and dangers may be
purchaser of the Product and is not assignable or transferable
caused by the negligence of the manufacturers or its agents
to any subsequent purchaser/end-user.
or any third party involved in designing or manufacturing
This warranty is limited to the repair and/or replacement, at
the Device; (c) these risks and dangers may arise from
SENA’s discretion, of defective or non-conforming Product, and
foreseeable or unforeseeable causes. You hereby assume
SENA shall not be responsible for the failure of the Product to
all risks and dangers and all responsibility for any losses
perform specified functions, or any other non- conformance
and/or damages, whether caused in whole or in part by the
caused by or attributable to: (a) any misapplication or misuse
negligence or other conduct of others, including the Company.
of the Product; (b) failure of Customer to adhere to any of
You confirm that you have read this release of liability and fully
SENA’s specifications or instructions; (c) neglect of, abuse
understand its terms and that you have given up substantial
of, or accident to, the Product; or (d) any associated or
rights by not returning the Device for a full refund (see refund
complementary equipment or software not furnished by SENA.
option below).
Limited warranty service may be obtained by delivering
the Product to SENA or to the international distributor it was
26
SPH10S
purchased through and providing proof of purchase or receipt
HEREUNDER OR THE PERFORMANCE, USE OR INABILITY
date. Customer agrees to insure the Product or assume the
TO USE THE SAME, EVEN IF SENA OR ITS DEALER HAS
risk of loss or damage in transit, to prepay shipping charges to
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SENA, and to use the original shipping container or equivalent.
IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY
EXCEED THE PRICE PAID FOR THE PRODUCT.
• Limitation of Liability
EXCEPT AS EXPRESSLY PROVIDED HEREIN, SENA MAKES
• Return for Full Refund
NO WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED,
IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO THE
WITH RESPECT TO ANY EQUIPMENT, PARTS OR SERVICES
ABOVE CONDITIONS, YOU MAY RETURN THIS DEVICE
PROVIDED PURSUANT TO THIS AGREEMENT, INCLUDING
TO SENA FOR A FULL REFUND, PROVIDED THAT YOU
BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
DO SO NO LATER THAN 14 BUSINESS DAYS FOLLOWING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
THE PURCHASE OF THE DEVICE AND SUBJECT TO THE
PURPOSE. NEITHER SENA NOR ITS DEALER SHALL BE
WRAPPING BEING INTACT. WHEN DOING SO, PLEASE
LIABLE FOR ANY OTHER DAMAGES, INCLUDING BUT NOT
REFER TO THIS SECTION. BY NOT RETURNING THE
LIMITED TO DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
DEVICE FOR REFUND WITHIN THE PERIOD PROVIDED,
CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION
YOU ARE EXPLICITLY IN AGREEMENT WITH THE ABOVE
IN CONTRACT OR TORT (INCLUDING NEGLIGENCE AND
AND RENOUNCE ALL RIGHTS TO FUTURE CLAIMS AND
STRICT LIABILITY), SUCH AS, BUT NOT LIMITED TO, LOSS
DEMANDS AGAINST SENA AS DEFINED ABOVE.
OF ANTICIPATED PROFITS OR BENEFITS RESULTING FROM,
OR ARISING OUT OF, OR IN CONNECTION WITH THE USE
OF FURNISHING OF EQUIPMENT, PARTS OR SERVICES
27
SPH10S
WARNING
Using the headset with loud volume may be harmful to your
eardrums and cause hearing loss. Please maintain proper
volume level to protect your ears.
28
www.senabluetooth.com
V1.0.0
Users Guide
Download PDF