Monogram | ZBD7005 | Product specifications | Monogram ZBD7005 Product specifications

M O N O G R A M
D E S I G N
G U I D E
The Monogram Collection ™
2
monogram.com
GE Monogram Design Guide
Monogram appliance planning:
from inspiration to installation.
Ta b l e o f C o n t e n t s
3
Introduction
4
Refrigeration
Built-In Side-by-Side Refrigerators
Now more than ever, the kitchen is the heart
of the home. It’s the place where we relax
friends. That’s why, when you build a new
28
home or remodel, the kitchen becomes the
center of your plans. It serves as your canvas
33
38
it easy to express your creative vision in
the kitchen—and throughout the home. With
detailed information on product specifications,
dimensions and installation, the Monogram
49
Design Guide helps bring your home design
plans to life.
Whether you’re a designer, builder,
architect or do-it-yourselfer, you’ll find
59
everything you need to select and install
Monogram appliances, including many
exciting options for customization. Should
you require additional planning guidelines
and resources, simply visit us online at
monogram.com.
12–17
Built-In All-Refrigerators and All-Freezers
18–21
74
22
Free-Standing Stainless Steel-Wrapped Refrigerators
23–24
Wine Reserve, Beverage Center and Icemaker
25–27
Dishwashers and Chef’s Washers
Compactors
for artistic expression.
The Monogram® Design Guide makes
Built-In Bottom-Freezer Refrigerators
Customization Options
and gather in the company of family and
4–11
32
Cooktops
Stainless Steel and Gas-on-Glass Gas Cooktops
33–34
Digital Electronic and Electric Cooktops
35–37
Built-In Cooking Products
Wall Oven with Advantium® Speedcook Technology
39–40
Electronic Convection Wall Oven
41–42
European Convection Wall Oven
43–44
Microwave Ovens
45–46
Warming Drawers
47–48
Professional Cooking Products
48" Dual-Fuel Professional Ranges
49–50
36" Dual-Fuel Professional Ranges
51–52
30" Dual-Fuel Professional Ranges
53–54
48" Cooktops
55–56
36" Cooktops
57–58
Ventilation Systems
Chimney Hoods
60–64
Professional Hoods
65–67
Telescopic Downdraft Vents
68–73
Outdoor Cooking Products
48" Outdoor Cooking Centers
74–75
36" Outdoor Cooking Centers
76–77
27" Outdoor Cooking Centers
78–79
24" Outdoor Cooking Centers
80–81
Dual-Burner Cooktops
82
3
Built-In Custom Side-by-Side Refrigerators
General Features
Customization. Monogram built-in trimmed refrigerators
require 1/4" door and grille panels available from your
Monogram dealer. These models also accept framed or
overlay custom panels from your cabinetmaker. Stainless
steel–wrapped models are shipped ready for installation.
DOOR
ALARM
CONTROL
LOCK
Overhead evaporator. Like commercial refrigerators, the
overhead evaporator is located outside the food zones.
This unique configuration enhances airflow, capacity and
efficiency. And it’s easily accessible by simply lifting the
hinged grille.
Temperature management system. Electronic sensors and
an exclusive air tower keep cooling consistent throughout
the fresh food and freezer compartments.
Climate-control drawer. Functions like a refrigerator within
a refrigerator. Precise controls allow you to express-chill
beverages, express-thaw frozen items and select specific
temperatures for perishable foods.
ENERGY STAR®-qualified. As an ENERGY STAR Partner, GE has
determined that the ZISB480DM, ZISW480DM, ZISB420DM,
ZISW420DM, ZISB360DM, and ZISW360DM meet the
ENERGY STAR guidelines for energy efficiency.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
48" Built-In
Refrigerator with
Dispenser
48" Built-In
Refrigerator
ZISW480DM, ZISB480DM,
ZISS480DMSS*
ZIS480NM, ZISS480NMSS*
Overall Dimensions
(WxHxD in inches):
48 x 84 x 23-7/8
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 775
Overall Dimensions
(WxHxD in inches):
48 x 84 x 23-7/8
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 775
■ 30.7 cu. ft. Capacity
■ ENERGY STAR®-Qualified
■ Concealed Door Hinges
■ Easy Access Hinged Grille
■ Four-Point Leveling System
■ Adjustable Door Stop
(90°/130°)
■ Trimmed (semi-flush)
Installation
■ Door Panels Required on
Trimmed Models
■ No Kits Required for
Customization
■ Two-Position Handle Adjusts
to Accommodate 1/4" Framed
or 3/4" Overlay Panels
■ 30.6 cu. ft. Capacity
■ Concealed Door Hinges
■ Easy Access Hinged Grille
■ Four-Point Leveling System
■ Adjustable Door Stop
(90°/130°)
■ Trimmed (semi-flush)
Installation
■ Door Panels Required on
Trimmed Models
■ No Kits Required for
Customization
■ Two-Position Handle Adjusts
to Accommodate 1/4" Framed
or 3/4" Overlay Panels
*Full stainless wrap
*Full stainless wrap
4
monogram.com
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Built-In Custom Side-by-Side Refrigerators
DOOR
ALARM
CONTROL
LOCK
42" Built-In
Refrigerator with
Dispenser
42" Built-In
Refrigerator
36" Built-In
Refrigerator with
Dispenser
36" Built-In
Refrigerator
ZISW420DM, ZISB420DM,
ZISS420DMSS*
ZIS420NM, ZISS420NMSS*
ZISW360DM, ZISB360DM,
ZISS360DMSS*
ZIS360NM, ZISS360NMSS*
Overall Dimensions
(WxHxD in inches):
42 x 84 x 23-7/8
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 725
Overall Dimensions
(WxHxD in inches):
42 x 84 x 23-7/8
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 725
Overall Dimensions
(WxHxD in inches):
36 x 84 x 23-7/8
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 675
Overall Dimensions
(WxHxD in inches):
36 x 84 x 23-7/8
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 675
■ 26.1 cu. ft. Capacity
■ ENERGY STAR®-Qualified
■ Concealed Door Hinges
■ Easy Access Hinged Grille
■ Four-Point Leveling System
■ Adjustable Door Stop
(90°/130°)
■ Trimmed (semi-flush)
Installation
■ Door Panels Required on
Trimmed Models
■ No Kits Required for
Customization
■ Two-Position Handle Adjusts
to Accommodate 1/4" Framed
or 3/4" Overlay Panels
■ 26.0 cu. ft. Capacity
■ Concealed Door Hinges
■ Easy Access Hinged Grille
■ Four-Point Leveling System
■ Adjustable Door Stop
(90°/130°)
■ Trimmed (semi-flush)
Installation
■ Door Panels Required on
Trimmed Models
■ No Kits Required for
Customization
■ Two-Position Handle Adjusts
to Accommodate 1/4" Framed
or 3/4" Overlay Panels
■ 21.7 cu. ft. Capacity
■ Concealed Door Hinges
■ Easy Access Hinged Grille
■ Four-Point Leveling System
■ Adjustable Door Stop
(90°/130°)
■ Trimmed (semi-flush)
Installation
■ Door Panels Required on
Trimmed Models
■ No Kits Required for
Customization
■ Two-Position Handle Adjusts
to Accommodate 1/4" Framed
or 3/4" Overlay Panels
■ 21.6 cu. ft. Capacity
■ Concealed Door Hinges
■ Easy Access Hinged Grille
■ Four-Point Leveling System
■ Adjustable Door Stop
(90°/130°)
■ Trimmed (semi-flush)
Installation
■ Door Panels Required on
Trimmed Models
■ No Kits Required for
Customization
■ Two-Position Handle Adjusts
to Accommodate 1/4" Framed
or 3/4" Overlay Panels
*Full stainless wrap
*Full stainless wrap
*Full stainless wrap
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
LOCK
*Full stainless wrap
5
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
DOOR
ALARM
CONTROL
Advance Planning for Built-In Custom Side-by-Side Refrigerators
Custom side-by-side refrigerators are available in 36", 42" and 48" widths. Design and installation considerations
are the same for all model widths.
Product Dimensions
The Installation Space
36" Models 12"
42" Models 18"
48" Models 20"
35", 41", or 47"
Case Width
*Finished Width
84-1/2" max
83-1/2" min
Finished
Opening
6"
Electrical
Area
5"
75" From Floor
to Bottom
of Electrical
Area
24"
5"
*84" From
Floor to
Top Frame
*83-1/2"
at
Rear
Water Supply 5" 3-1/2"
3-1/2"
Space is the first consideration when planning the
installation.
* The finished cutout width must be:
35-1/2" Min. for 36" wide models
41-1/2" Min. for 42" wide models
47-1/2" Min. for 48" wide models
The cutout depth must be 24"
The refrigerator will project forward, slightly beyond
adjacent cabinetry, depending on your installation.
The cutout depth beneath a soffit
When installed beneath a soffit, the soffit cannot exceed
the 24" installation depth shown. The top case trim
overlaps the bottom of the soffit.
36", 42", or 48"
Frame to Frame
*Shipping Height. The refrigerator can be adjusted to fit into a cutout
that is 83-1/2" min. to 84-1/2" max. height. The top case trim at the
front is 1/2" higher and will overlap upper cabinetry or soffit. Use
leveling legs and wheels for a maximum 1" height adjustment.
Door Swing Clearances
The installation must allow for clearances to adjacent
walls or cabinets. These refrigerators are equipped with
a 2-position door stop. The factory-set 130° door swing
can be adjusted to 90° if clearance to adjacent cabinets
or walls is restricted.
A
B
130° Door Swing
90° Door Swing
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
Electrical must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
Water Line
All models are equipped with an automatic icemaker.
The water line can enter the opening through the floor
or back wall. Route 1/4" O.D. copper tubing or GE
QuickConnect kit between the cold water line and the
water connection location. The copper tubing should be
long enough to extend to the front of the refrigerator.
The installation of an easily accessible shut-off valve in
the water line is required.
23-7/8"
Behind
Frame
C
4" Min.
to Wall
Models
36"
42"
48"
A
13"
13"
15"
B
15"
19"
20"
C
20-5/8"
26-5/8"
28-5/8"
Allow minimum clearances for freezer door (Dimension A)
and fresh food door (Dimension B) for a full 130° door
swing and to allow for pan removal.
• 4" minimum clearance is required when the door swing
is adjusted to 90°. If the 90° door stop position is used,
pan access is maintained, but pan removal is restricted.
• See door swing illustrations to determine interaction
with adjacent cabinets or countertops.
6
monogram.com
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Built-In Custom Side-by-Side Refrigerators
Customization Basics: Framed Or Overlay Panels, Custom Handles
and Accessory Kits
Stainless steel–wrapped refrigerators have wrapped
doors and grille panel, beveled edges and tubular
stainless steel handles that coordinate with other
Monogram appliances. These models are shipped
ready for installation.
Trimmed Refrigerators
ZIS360NMSS, ZISW360DMSS, ZISB360DMSS
ZIS420NMSS, ZISW420DMSS, ZISB420DMSS
ZIS480NMSS, ZISW480DMSS, ZISB480DMSS
Trimmed refrigerators are designed to be customized
with decorative panels. Field-installed custom door and
grille panels are required.
Door Handles
The supplied handles can be adjusted to accommodate
both framed or overlay panels. Custom handles of your
choice, supplied by your cabinet maker, can also be
installed. If desired, you may order ZKHSS2 Monogram
stainless steel tubular handle kit for overlay panels.
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
ZISS360NMSS, ZISS360DMSS
ZISS420NMSS, ZISS420DMSS
ZISS480NMSS, ZISS480DMSS
Side Panels
Side panels must be used whenever the sides of the
refrigerator will be exposed.
Optional Accessory Kit
ZKHSS2: Tubular Stainless Steel handles designed to fit
overlay panels.
Accessory Panels
White or black acrylic and stainless steel accessory panels
are available from your Monogram supplier. Panels are
cut to size and ready to install. These panel kits must be
ordered separately.
Framed Panels
You may install 1/4"-thick custom panels from your
cabinet manufacturer. The decorative panels slide into
the factory-installed trim. Or, order black, white and
stainless steel accessory panels from your
Monogram dealer.
Models
ZISW480D
ZISB480D
ZIS480N
ZISW420D
ZISB420D
ZIS420N
ZISW360D
ZISB360D
ZIS360N
White
Acrylic
ZPW480D
ZPW480N
ZPW420D
ZPW420N
ZPW360D
ZPW360N
Black
Acrylic
ZPB480D
ZPB480N
ZPB420D
ZPB420N
ZPB360D
ZPB360N
Stainless
Steel
ZPS480D
ZPS480D
ZPS480N
ZPS420D
ZPS420D
ZPS420N
ZPS360D
ZPS360D
ZPS360N
Framed Panel
Standard supplied handles shown in 1/4" panel position.
Overlay Panels
You may also choose to install custom overlay
panels from your cabinet manufacturer. This design
provides a seamless appearance which integrates
smoothly with surrounding cabinetry.
3/4" Overlay Panel
.10" Thick Spacer Panel
1/4" Thick Backer Panel
Standard supplied handles shown in 3/4" overlay panel position.
7
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
Stainless Steel–Wrapped Refrigerators
Advance Planning for Custom Built-In Side-by-Side Refrigerators
3/4" Overlay Panel Dimensions
Raised Overlay Panel Design
On Dispenser Models
For a more custom
appearance, overlay
panels may be installed
on trimmed models. The
overlay panel must be
secured to a 1/4"-thick backer
panel which slides into the
trim. A spacer panel 0.10"
thick must be placed
between the overlay and
backer panels.
When a raised panel design is to be used, a custom
wide middle rail is required to accept the dispenser trim.
Door
Center each panel over
the other. Assemble the
panels with glue and
screws. Screws must
be countersunk into
the backer panel.
• The middle rail must be wide enough to allow for the
dispenser trim to overlap the opening.
• The middle rail must be 1.100" total thickness to accept
the dispenser trim.
1/4" Backer Panel
.10" Spacer
3/4" Overlay Panel
1/4"
Backer
Panel
.250" + .10" + .750" =
1.100" Total Panel Thickness
3/4"
Overlay
Panel
.10"
Spacer
Overlay Panel
Dispenser
Trim
Spacer Panel
Wide
Middle
Rail is
Required
16-3/4"
Backer Panel
NOTE: Left-to-right offset is
not always equal to top-tobottom offset.
10-5/8"
Side View
A
36" Side-by-Side (in inches)
Grille Panel
Dispenser
Cutout
B
1/4" Backer Panel
.10" Spacer Panel
3/4" Spacer Panel
F
D
C
Fresh Food
Panel
E
1/4" Backer Panel
.10" Spacer Panel
3/4" Spacer Panel
Dispenser Cutout
15-3/8"
9-5/8"
*Cut the dispenser opening after the backer, spacer and overlay panels
have been assembled.
8
B
9
8-3/8
9-1/4
C
68-3/8
67
68-5/8
D
14-9/16
13-1/4
14-13/16
E
18-9/16
17-1/4
18-13/16
C
68-3/8
67
68-5/8
D
14-9/16
13-1/4
14-13/16
E
24-9/16
23-1/4
24-13/16
C
68-3/8
67
68-5/8
D
18-9/16
17-1/4
18-13/16
E
26-9/16
25-1/4
26-13/16
42" Side-by-Side (in inches)
G
Freezer
Panel
A
33-7/8
33
34-1/8
Important Note: Maximum weight for fresh food panel
is 50 pounds and 30 pounds for freezer panel.
A
39-7/8
39
40-1/8
B
9-1/2
8-5/8
9-3/4
48" Side-by-Side (in inches)
1/4" Backer Panel
.10" Spacer Panel
3/4" Spacer Panel
A
45-7/8
45
46-1/8
B
9-1/2
8-5/8
9-3/4
*Dispenser Cutout Position (in inches)
36" Models
42" Models
48" Models
F
17-15/16
17-15/16
17-15/16
G
3-1/4
3-1/4
5-1/4
monogram.com
Dispenser Models
These refrigerators are supplied with two dispenser trims,
one for framed panels and one for overlay panels.
If you choose to install
framed panels, they must be
cut to the dimensions shown.
The panels will slide into the
frame on the door and grille.
Door
5/16"
Trim
Reveal
1/4" Framed Panel
The framed panel must be 1/4" nominal thickness to fit
the dispenser trim.
1/4"
Panel
• The dispenser trim fits over the custom panel and snaps
into the freezer door.
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
If the custom panel is less
than 1/4" thick, and it fits
loosely in the door frame,
it can be backed up with a
piece of filler material or
foam tape to improve the fit.
• If the panel is less than 0.250" thick, a noticeable gap
may be created around the dispenser trim. Foam tape
may be applied on the door to improve the fit.
• If the panel is more than 0.250" thick, the dispenser trim
cannot be secured to the door.
Important Note: Maximum
weight for fresh food panel is
50 pounds and 30 pounds for
freezer panel.
1/4"
Framed
Panel
A
FREEZER DOOR
0.250"
Thick
Ice / Water Dispenser
Grille Panel
B
1/4" Dispenser Trim
Dispenser
Cutout
3/4" Overlay Panels
F
The overlay dispenser trim is designed to fit a total
panel thickness of 1.100".
Freezer
Panel
Fresh Food
Panel
D
E
Side-by-Side (in inches)
A
B
36" Models 33-7/8
9
42" Models 39-7/8
9-1/2
48" Models 45-7/8
9-1/2
• If the panel is less than 1.100" thick, a noticeable gap
may be created around the dispenser trim.
Dispenser Cutout
C
G
15-3/8"
• If the panel is more than 1.100" thick, the dispenser
trim cannot be secured to the door.
• The overlay panel must be constructed according to
the specifications shown to achieve the correct total
thickness.
9-5/8"
C
68-3/8
68-3/8
68-3/8
Dispenser Cutout Position (in inches)
F
G
36" Models 17-13/16 3-1/8
42" Models 17-13/16 3-1/8
48" Models 17-13/16 5-1/8
D
14-9/16
14-9/16
18-9/16
E
18-9/16
24-9/16
26-9/16
• Alternative panel construction methods such as
securing a 3/4" panel to a 1/4" backer panel cannot be
used. Another method, routing a 3/4"-thick panel on all
sides, cannot be used. These methods will not result in
the required 1.100" panel thickness.
• When a raised panel design is to be used, a custom
middle rail is required. See page 7 for details.
1/4" Backer Panel
FREEZER DOOR
.10" Spacer
Panel
1.100"
Total
Thickness
Ice / Water Dispenser
3/4" Overlay
Panel
3/4" Overlay Dispenser Trim
9
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
1/4" Framed Panel Dimensions
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Built-In Custom Side-by-Side Refrigerators
Advance Planning for Built-In Custom Side-by-Side Refrigerators
Use this page to determine door
swing interaction with adjacent
cabinets or countertops.
Refrigerator
Frameless Cabinets:The case trim overlaps cabinets at
the top and sides. Therefore, frameless cabinets may
require filler strips to prevent interference with cabinet
door swing. The opening must allow for filler strips.
23-7/8" From
Rear of
Refrigerator
2"
1"
Case
Trim
1/2"
1/4"
3"
1-3/4"
3/4"
2-3/4"
1-1/2"
2-1/2"
1-1/4"
2-1/4"
1/4"
1/2"
3/4"
1"
1/4"
Door
1/2"
3/4"
1"
1-1/4"
3/4" Overlay
Panel
(Nominal Size)
Top View
130° Door Swing
(Factory setting)
Scale 1:1
IMPORTANT NOTE – FOR DISPENSER MODELS
10
Dispenser models are supplied with two dispenser
trims, one to fit framed panels and one for overlay
panels. Dispenser trim fit to the custom panel depends
on correct panel thickness. Framed panels must be 1/4"
nominal. Overlay panels should be constructed as shown
to accomplish a total 1.100" thickness.
monogram.com
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Built-In Side-by-Side Refrigerators
Use this page to determine door
swing interaction with adjacent
cabinets or countertops.
Refrigerator
23-7/8"
From Rear of
Refrigerator
Frameless Cabinets:The case trim
overlaps cabinets at the top and sides.
Therefore, frameless cabinets may require
filler strips to prevent interference with
cabinet door swing. The opening must
allow for filler strips.
1/4"
1/2"
3/4"
1"
1-1/4"
1-1/2"
Top View
90° Door Swing
(Optional setting)
Scale 1:1
1/4"
Door
1/2"
3/4"
IMPORTANT NOTE –
FOR DISPENSER MODELS
Dispenser models are supplied
with two dispenser trims, one to
fit framed panels and one for
overlay panels. Dispenser trim
fit to the custom panel depends
on correct panel thickness.
Framed panels must be 1/4"
nominal. Overlay panels should
be constructed as shown to
accomplish a total 1.100" thickness.
1"
1-1/4"
3/4" Overlay
Panel
(Nominal Size)
11
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
Case Trim
Built-In Bottom-Freezer Refrigerators
General Features
Customization. Monogram built-in trimmed refrigerators
require 1/4" door and grille panels available from your
Monogram dealer. These models also accept framed or
overlay custom panels from your cabinetmaker. Stainless
steel–wrapped models are shipped ready for installation.
Temperature management system.The temperature
management system with upfront electronic controls
delivers cool, fresh air to every shelf.
Adjustable shelves and bins. Four split shelves and six
door bins provide important storage flexibility.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
12
36" Built-In
Refrigerators
36" Built-In
Stainless Steel
Refrigerators
ZIC360NMRH, ZIC360NMLH
ZICS360NMRH, ZICS360NMLH
Overall Dimensions
(WxHxD in inches):
36 x 84 x 23-7/8
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 675
Overall Dimensions
(WxHxD in inches):
36 x 84 x 23-7/8
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 675
■ 20.6 cu. ft. Capacity
■ Concealed Door Hinge
■ Easy Access Hinged Grille
■ Four-Point Leveling System
■ Adjustable Door Stop
(90°/130°)
■ Trimmed (semi-flush)
Installation
■ Door Swing Preference
Must Be Specified
■ Door Panels Required
■ No Kits Required for
Customization
■ Two-Position Handle Adjusts
to Accommodate 1/4" Framed
or 3/4" Overlay Panels
■ Unified Grille Kit for
Side-by-Side Installation
of two Bottom-Freezer
Refrigerators
■ 20.6 cu. ft. Capacity
■ Concealed Door Hinge
■ Easy Access Hinged Grille
■ Four-Point Leveling System
■ Adjustable Door Stop
(90°/130°)
■ Full Stainless Wrap
■ Trimmed (semi-flush)
Installation
■ Door Swing Preference
Must Be Specified
■ Unified Grille Kit for
Side-by-Side Installation
of two Bottom-Freezer
Refrigerators
monogram.com
The Installation Space
Door Swing Clearances
The finished cutout width must be 35-1/2".
The installation must allow for clearances to adjacent
walls or cabinets. These refrigerators are equipped with a
2-position door stop. The factory-set 130° door swing can
be adjusted to 90° if clearance to adjacent cabinets or
walls is restricted.
25"
Min. to
Wall
6"
10"
84-1/2" max
83-1/2" min
Finished
Opening
Electrical
Area
75" From
Floor to Bottom
of Electrical
Area
24" Cutout Depth
5" Water Supply
3 1/2"
90° Door Swing
130° Door Swing
5"
23-7/8"
Behind
Frame
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
Wall View
2-5/16"
36-3/4"
3 1/2"
90°
130°
The cutout depth must be 24"
The refrigerator will project forward, slightly beyond
adjacent cabinetry, depending on your installation.
The cutout depth beneath a soffit
When installed beneath a soffit, the soffit cannot exceed
the 24" installation depth shown. The top case trim
overlaps the bottom of the soffit.
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
Electrical must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
Water Line
All models are equipped with an automatic icemaker.
The water line can enter the opening through the floor or
back wall. Route 1/4" O.D. copper tubing or GE
QuickConnect kit between the cold water line and the
water connection location at the front of the refrigerator.
The installation of an easily accessible shut-off valve in
the water line is required.
4" Min.
to Wall
Allow 25" minimum clearances for
a full 130° door swing. Allow 15"
for pan removal.
• 4" minimum clearance is required when the door swing
is adjusted to 90°. If the 90° door stop position is used,
pan access is maintained, but pan removal is restricted.
• See door swing illustrations to determine interaction
with adjacent cabinets or countertops.
ZUG2, ZUGSS2 Unified Grille Panel Kit
• If you are installing two refrigerators side by side, the
installation space must be 71-1/2" wide.
Note: Additional cutout width may be required when
side panels are used. Add side panel thickness to the
finished cutout to calculate rough-in width.
• The water and electrical locations for each product
must be located as shown.
• A separate 115V, 60Hz., 15 or 20 amp power supply is
recommended for each product.
71-1/2" Finished Width
Product Dimensions
35"
Case Width
*83-1/2"
at
Rear
*84" From
Floor to
Top Frame
36"
Frame to Frame
Width
2-5/16"
*Shipping Height.
The refrigerator can
be adjusted to fit
into a cutout that
is 83-1/2" min. to
84-1/2" max. height.
The top case trim
at the front is 1/2"
higher and will
overlap upper
cabinetry or soffit.
Use leveling legs
and wheels for a
maximum 1" height
adjustment.
10"
10"
84-1/2" max
83-1/2" min
Finished
Opening
Wall View
24-3/16"
6"
Electrical
24" Cutout
Depth
5" Water Supply
26"
3-1/2"
Water Supply 5"
75" From
Floor to Bottom
of Electrical
Area
26"
3-1/2"
13
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
35-1/2"
Finished Width
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Built-In Bottom-Freezer Refrigerators
Advance Planning for Built-In Bottom-Freezer Refrigerators
Customization Basics: Framed or Overlay Panels,
Custom Handles and Accessory Kits
These bottom-freezer refrigerators are factory set for a left or right door
swing. The door swing is NOT reversible. Choose an RH model with hinge
on the right side; the door swings left to right. Choose an LH model with
hinge on the left side; the door will swing right to left.
Right-Hand
Door Swing
Left-Hand
Door Swing
Stainless Steel–Wrapped Refrigerators
ZICS360NMLH, ZICS360NMRH
Stainless steel–wrapped refrigerators have wrapped doors
and grille panel, beveled edges and tubular stainless
steel handles. These models are shipped ready for
installation.
Door Handles
The supplied handles can be adjusted to accommodate
both framed or overlay panels. Custom handles of your
choice, supplied by your cabinet maker, can also be
installed. If desired, you may order ZKHCSS2 Monogram
Stainless Steel Tubular Handle Kit for overlay panels.
Trimmed Refrigerators
ZIC360NMLH, ZIC360NMRH
Trimmed refrigerators are designed to be customized
with decorative panels. Field-installed custom door and
grille panels are required.
Side Panels
Side panels must be used whenever the sides of the
refrigerator will be exposed.
Framed Panels
You may install 1/4"-thick custom panels from your cabinet
manufacturer. The decorative panel or accessory panel
slide into the factory-installed trim.
Optional Accessory Kits
ZKHCSS2: Monogram Stainless Steel Tubular Handle Kit
and Handle Side Trim for custom handles. For use on
3/4" custom panels.
ZUG2: For side-by-side installation of two trimmed
bottom-freezer refrigerators. This kit provides for the
installation of a unified custom grille panel to span the
width of two units using a framed or overlay panel.
ZUGSS2: For side-by-side installation of two stainless
steel–wrapped bottom-freezer refrigerators. This kit
provides a unified stainless steel grille panel to span the
width of two units.
Standard Door Handle
Framed Panel
Standard supplied handles shown in 1/4" panel position.
Overlay Panels
You may also choose to install custom overlay panels
from your cabinet manufacturer. This design provides a
seamless appearance which integrates smoothly with
surrounding cabinetry.
Standard
Door Handle
3/4" Overlay Panel
.10" Thick Spacer Panel
1/4" Thick Backer Panel
Standard supplied handles shown in 3/4" overlay panel position.
14
Accessory Panels
White or black acrylic and stainless steel accessory
panels are available from your Monogram supplier.
Panels are cut to size and ready to install. These panel
kits must be ordered separately.
Black
ZPBC360
White
ZPWC360
Stainless Steel
ZPSC360
monogram.com
Door/Drawer
5/16"
Trim
Reveal
1/4"
Panel
If the custom panel is less
than 1/4" thick, and it fits
loosely in the door frame, it
can be backed up with a piece
of filler material or foam tape
to improve the fit.
Center each panel
over the other.
Assemble the
panels with glue
and screws.
Screws must be
countersunk into
the backer panel.
B
C
Freezer Drawer
Panel
D
Overlay
Panel
.10 Inch
Spacer
.250" + .10" + .750" =
1.100" Total Panel Thickness
A
Fresh Food
Panel
Door/Drawer
1/4"
Backer
Panel
Important Note: Maximum
weight for fresh food panel is
50 pounds and 30 pounds for
freezer drawer panel.
Grille Panel
For a more custom
appearance, overlay
panels may be installed
on trimmed models. The
overlay panel must be
secured to a 1/4"-thick
backer panel which slides
into the trim. A spacer panel
0.10" thick must be placed
between the overlay and
backer panel.
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
If you choose to install framed
panels, they must be cut to
the dimensions shown. The
panels will slide into the
frame on the door, drawer
and grille.
3/4" Overlay Panel Dimensions
Overlay Panel
Spacer Panel
Backer Panel
NOTE: Left-to-right offset is not always equal to
top-to-bottom offset.
ZUG2 Grille Panel Dimensions
Framed Panel Dimensions (in inches)
A (Width) B (Grille Ht.) C (FF Ht.) D (FZ Ht.)
1/4" Framed Panel 33-7/8
8-7/8
46-1/16 21-7/8
3/4" Overlay Panel Dimensions (in inches)
A (Width) B (Grille Ht.)
1/4" Backer Panel 33-7/8
8-7/8
.10" Spacer Panel 32-1/2
7-5/8
3/4" Overlay Panel 34-1/8
9
C (FF Ht.)
46-1/16
44-11/16
46-5/16
D (FZ Ht.)
21-7/8
20-1/2
22
The ZUG2 unified grille panel kit will accept a framed or
overlay grille panel.
• Assemble the overlay panel in the same manner as
the door and drawer panels.
A
B
Grille Panel
Framed Panel Dimensions
A (Width)
1/4" Framed Panel
69-7/8"
B (Height)
8-7/8"
Overlay Panel Dimensions
A (Width)
1/4" Backer Panel
69-7/8"
.10" Spacer Panel
68-1/2"
3/4" Overlay Panel
70-1/8"
B (Height)
8-7/8"
7-5/8"
9"
15
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
1/4" Framed Panel Dimensions
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Built-In Bottom-Freezer Refrigerators
Advance Planning for Built-In Bottom-Freezer Refrigerators
Use this page to determine door
swing interaction with adjacent
cabinets or countertops.
Refrigerator
Frameless Cabinets:The case trim overlaps cabinets at
the top and sides. Therefore, frameless cabinets may
require filler strips to prevent interference with cabinet
door swing. The opening must allow for filler strips.
23-7/8" From
Rear of
Refrigerator
2"
1"
Case
Trim
1/2"
1/4"
3"
1-3/4"
3/4"
2-3/4"
1-1/2"
2-1/2"
1-1/4"
2-1/4"
1/4"
1/2"
3/4"
1"
1/4"
Door
1/2"
3/4"
1"
1-1/4"
3/4" Overlay
Panel
(Nominal Size)
16
Top View
130° Door Swing
(Factory setting)
Scale 1:1
monogram.com
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Built-In Bottom-Freezer Refrigerators
Use this page to determine door
swing interaction with adjacent
cabinets or countertops.
Refrigerator
23-7/8"
From Rear of
Refrigerator
Frameless Cabinets:The case trim
overlaps cabinets at the top and sides.
Therefore, frameless cabinets may require
filler strips to prevent interference with
cabinet door swing. The opening must
allow for filler strips.
1/4"
1/2"
3/4"
1"
1-1/4"
1-1/2"
1/4"
Door
1/2"
3/4"
1"
1-1/4"
3/4" Overlay
Panel
(Nominal Size)
Top View
90° Door Swing
(Optional setting)
Scale 1:1
17
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
Case Trim
Built-In All-Refrigerators and All-Freezers
General All-Refrigerator Features
Adjustable shelves and bins. Split shelves move up and
down for custom storage arrangement and raised edges
to help contain spills. Six adjustable door bins (two for
gallon-size containers) add important storage flexibility.
There are also two door dairy compartments that seal for
longer freshness.
Produce and snack pans. Vegetable compartments with
individual humidity controls, as well as sealed snack pans,
glide open smoothly.
General All-Freezer Features
Adjustable shelves and bins. Five wire shelves move up
and down for custom storage arrangement. Ten adjustable
door bins (two for gallon-size containers) enhance storage
flexibility.
Specialized storage baskets. Eight pullout wire baskets with
clear view fronts (two with lids) allow compartmentalized
storage for different food types.
General All-Refrigerator and
All-Freezer Features
Customization. All Monogram built-in refrigerators
require 1/4" door and grille panels, which are available
from your Monogram dealer (white or black Lexan®, and
stainless steel). Also available is a unified grille panel kit
accessory for either 3/4"-thick custom panels or stainless
steel wrap.
Left- or right-hinged door swing. Door-swing preference
must be specified when ordering. (Handles and hinges
are not reversible.)
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
36" Built-In
All-Refrigerator
36" Built-In
All-Freezer
ZIR36NMRH, ZIR36NMLH,
ZIRS36NMRH*, ZIRS36NMLH*
ZIF36NMRH, ZIF36NMLH,
ZIFS36NMRH*, ZIFS36NMLH*
Overall Dimensions
(WxHxD in inches):
36 x 84 x 24-3/4
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.)
Overall Dimensions
(WxHxD in inches):
36 x 84 x 24-3/4
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.)
675
■ 21.9 cu. ft. Capacity
■ Four-Point Leveling System
■ 130° Door Stop
■ Coil-Free Back
■ Flush or Trimmed
(semi-flush) Installation
■ Trimmed Models Require
Door and Grille Panels
■ Trim Kit Required for 3/4"
Trimless Panels, Custom
Handles or Installation
Heights of 83-1/2" or 84-1/2".
■ Door Swing Preference
Must Be Specified
■ Unified Grille Kits for
Installation with 3/4" Custom
Panels or Stainless Steel
Models
■ 21.9 cu. ft. Capacity
■ Four-Point Leveling System
■ 130° Door Stop
■ Coil-Free Back
■ Automatic Icemaker
■ Flush or Trimmed
(semi-flush) Installation
■ Trimmed Models Require
Door and Grille Panels
■ Trim Kit Required for 3/4"
Trimless Panels, Custom
Handles or Installation
Heights of 83-1/2" or 84-1/2".
■ Door Swing Preference
Must Be Specified
■ Unified Grille Kits for
Installation with 3/4" Custom
Panels or Stainless Steel
Models
*Full stainless wrap
*Full stainless wrap
18
675
monogram.com
Product Dimensions
Electrical Outlet
Location 2-1/2"
24-3/4"
B
A = 36", B = 35-1/2" for
semi-flush and 36" for flush
installations.
83-1/2"
To
84-1/2"
5"
24-3/4" Total Depth
5"
Note: Icemaker
Water Connection
Is At The Front
Of The Freezer
Water Supply
5"
*84"
75" From Floor
to Bottom
of Electrical
Area
24-3/4"
3-1/2"
A
3-1/2"
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
Electrical must be located on rear wall as shown.
Door Swing Clearances
The installation must allow for clearances to adjacent
walls or cabinets. These refrigerators are factory set for
a 130° door swing. The door swing can be reduced to as
little as a 90° opening with an optional WR14X99 kit.
25"
Min. to
Wall
Note: GFI (ground fault interrupter) is not recommended.
Water Line
Freezer models are equipped with an automatic icemaker.
The water line can enter the opening through the floor
or back wall. Route 1/4" O.D. copper tubing or GE
QuickConnect kit between the cold water line and the
water connection location at the front of the freezer. The
installation of an easily accessible shut-off valve in the
water line is required.
Leveling
The rear leveling wheels and front leveling legs are
limited to a maximum height adjustment of 1".
Side-by-Side Installations
When installing an All-Refrigerator and All-Freezer side
by side, the installation space must be 71-1/2" wide.
*Shipping height. Cabinet
height may be changed to
83-1/2" or 84-1/2" using
ZGC2 grille panel kit. The
ZKTR36 kits for 3/4" thick
panels provide a grille panel
support for all heights.
90° Door Swing
130° Door Swing
36-3/4"
130°
90° door swing with optional WR14X99 door stop.
4" Min.
to Wall
• Allow 25" minimum clearance for a full 130° door
swing. Allow 15" for pan removal.
• Locate water and electrical as shown.
• 4" minimum clearance is required when the door swing
is adjusted to 90°. If the 90° door stop position is used,
pan access is maintained, but pan removal is restricted.
• A separate 115V, 60Hz., 15 or 20 amp power supply
is recommended for each product.
Clearances for Multiple Installations
71-1/2" Finished Width
2-1/2"
28-1/2"
Electrical
Wall View
When installing an All-Refrigerator and All-Freezer side
by side, allow 25" for a full 130° door swing, or 15" min.
on the hinge sides for pan access.
6"
5"
5"
84-1/2" max
83-1/2" min
Finished
Opening
24" Cutout
Depth
75" From
Floor to Bottom
of Electrical
Area
5" Water Supply
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
6"
25"
Min. to
Wall
0"
130° Door Swing
130° Door Swing
25"
Min. to
Wall
26"
3-1/2"
Freezer
Refrigerator
19
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
The Installation Space
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Built-In All-Refrigerators and All-Freezers
Advance Planning for Built-In All-Refrigerators and All-Freezers
Customization Basics: Framed or Overlay Panels, Custom Handles and Accessory Kits
These Monogram All-Refrigerators and All-Freezers may
be installed flush or semi-flush with surrounding cabinetry.
Cutout dimensions, clearances and side panel sizes are
determined by the many installation options available.
The All-Refrigerator and All-Freezer models are factory
set for a left or right door swing. The door swing is NOT
reversible. Choose an RH model with hinge on the right
side; the door swings left to right. Choose an LH model
with hinge on the left side; the door will swing right to left.
Stainless Steel–Wrapped All-Refrigerators
ZIRS36NMLH, ZIRS36NMRH
Stainless Steel–Wrapped All-Freezers
ZIFS36NMLH, ZIFS36NMRH
Stainless steel–wrapped models have tubular stainless
steel handles that coordinate with other Monogram
appliances. These models do not accept custom panels
or custom handles. However, you may wish to change
the installation height or use a side-by-side kit.
Trimmed All-Refrigerators
ZIR36NMLH, ZIR36NMRH
Trimmed All-Freezers
ZIF36NMLH, ZIF36NMRH
Trimmed All-Refrigerators are designed to be customized
with decorative panels. Field-installed custom door and
grille panels are required. Use one or more kits to
accomplish a wide range of appearance options. Trim
kits must be ordered separately from your Monogram
supplier. See trim kit descriptions at right.
Framed Panels
You may install a 1/4"-thick custom panel from your
cabinet manufacturer. The decorative panel slides into
the factory-installed trim. Black or white Lexan® and
stainless steel accessory panels are available from
your Monogram dealer.
3/4" Trimless Panels
You may also choose to install a 3/4" custom overlay
panel from your cabinet manufacturer. This design
provides a seamless appearance which integrates
smoothly with surrounding cabinetry. A trim kit is
required for a 3/4" custom panel.
Door Handles
The supplied handle can be replaced with a custom
handle of your choice on both 1/4" and 3/4" panels.
The Monogram tubular stainless steel handle is also
available to fit the chosen panel thickness. Custom
handles should be supplied by your cabinet maker.
Trim kits are required to support a custom handle.
Optional Trim Kits
Door Handle Kits
ZKHR1: Provides the necessary framework to install
a custom handle of your choice onto a 1/4"-thick custom
panel. (Handle not included.)
ZKHTR1: Provides the necessary framework to install a
custom handle of your choice onto a 3/4"-thick custom
panel. (Handle not included.) This kit must be used in
combination with ZKTR36LH or ZKTR36RH.
ZKHRSS1: Tubular stainless steel handle for 1/4"-thick
panel installation.
ZKHTRSS1: Tubular stainless steel handle for 3/4"-thick
panel installation. This kit must be used in combination
with ZKTR36LH or ZKTR36RH.
Custom Panel Kits
ZKTR36LH for ZIR36NDLH, ZIF36NDLH
ZKTR36RH for ZIR36NDRH, ZIF36NDRH
Provides for the installation of 3/4" thick custom door
and grille panels. Use this kit for a trimless appearance.
This kit includes a standard handle to fit the 3/4"
thick panel.
Height Adjustment Kit
ZGC2: Provides 1/4" grille panel frame side pieces for
83-1/2" and 84-1/2" installation heights. (The supplied
grille panel frame is set for 84" installation height.)
Side-by-Side Kit
ZUG75: For side-by-side installation of two trimmed
units. This kit provides for the installation of a 3/4"
unified custom grille panel to span the width of two
units. Includes a trim strip to cover inside case trim
for a finished appearance. This kit must be used in
combination with BOTH the ZKTR36LH and ZKTR36RH
custom panel kits.
Stainless Steel Trim Kits
ZGCSS36RH, ZGCSS36LH Grille Panel Kits
The supplied grille panel is sized for an 84" installation
height. This kit includes stainless steel grille panels for
83-1/2" and 84-1/2" installation heights. Order LH or RH
kits to match your models.
ZUGSS Side-by-Side Grille Panel Kit
For installation of two stainless steel units. This kit
provides a unified stainless steel grille panel to span the
width of two units. It includes a trim strip to cover the
inside case trims for a finished appearance.
Accessory Panels
White or black Lexan® and stainless steel accessory
panels are available from your Monogram supplier.
Panels are cut to size and ready to install. These panel
kits must be ordered separately.
Black
ZWBR36
20
White
ZWWR36
Stainless Steel
ZWSR36
monogram.com
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Built-In All-Refrigerators and All-Freezers
Custom Panel Dimensions
1/4" Custom Grille Panel Dimensions
The supplied grille panel frame is factory-assembled for
84" installation height. Order ZGC2 Grille Panel Kit when
installation height is more or less than 84".
A
Custom
Panel
1/4" Custom Grille Panel
Panel Width
Panel Height to fit Installation Height
83-1/2" 84"
84-1/2"
35-1/8"
7-1/2"
8"
8-1/2"
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
Important Note:
Maximum weight
for door panel is
50 pounds.
Width
B
Height
Rout for 3/4"
Handle Kits Only
See Details
Custom Door Panel Sizes
SIZES
A
1/4" Panels
35-1/16"
3/4" Panels
35-1/16"
3/4" Panels with
Custom Handle
35-1/4"
3/4" Grille Panel Dimensions
Order ZKTR36LH or ZKTR36RH panel kit. A grille panel
support is included with this trim kit and fits all
installation heights.
B
68-7/8"
68-15/16"
3/4" Custom Grille Panel
Panel Width
Panel Height to fit Installation Height
83-1/2" 84"
84-1/2"
35-1/4"
7-3/4"
8-1/4"
8-3/4"
68-15/16"
For Handle Kits Only
Rout Back Side of Panel
1-13/16"
1/4"
Max.
Custom Grille Panels
Appearance Side
ZUG75 Grille Panel Dimensions
The ZUG75 Grille Panel Kit should be used in combination
with both the ZKTR36LH and ZKTR36RH panel kits.
3/4" Custom Grille Panel
Panel Width
Panel Height to fit Installation Height
83-1/2" 84"
84-1/2"
71-3/8"
7-3/4"
8-1/4"
8-3/4"
Width
Rout the back side of the custom panel when installing a
ZKHTR1 Custom Handle Kit or ZKHTRSS1, Tubular
Stainless Steel Handle Kit.
ZUG75 Grille Panel
Height
21
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
Framed and 3/4" Trimless Panel Dimensions
If you choose to install framed or 3/4" trimless panels,
they must be cut to the dimensions shown.
Custom Options for Refrigerators
48" Side-by-Side Refrigerators
Models
Custom Options
Stainless Steel Tubular Handles
for Overlay Panels
1/4" Black Acrylic Panels
1/4" White Acrylic Panels
1/4" Stainless Steel Panels
Glossary of Terms
ZISW480DM
ZISB480DM
ZIS480NM
ZKHSS2
ZKHSS2
ZPB480D
ZKHSS2
ZPB480N
ZPW480N
ZPS480N
ZPW480D
ZPS480D
ZPS480D
ZISW420DM
ZISB420DM
ZIS420NM
Tubular stainless steel handles.
Monogram stainless steel tubular
handles can be used with custom
panels.
ZKHSS2
ZKHSS2
ZPB420D
ZPS420D
ZKHSS2
ZPB420N
ZPW420N
ZPS420N
Unified grille panel kit.
An optional grille panel creates
a unified look above two units
placed side by side.
ZISW360DM
ZISB360DM
ZIS360NM
ZKHSS2
ZKHSS2
ZPB360D
ZKHSS2
ZPB360N
ZPW360N
ZPS360N
42" Side-by-Side Refrigerators
Models
Custom Options
Stainless Steel Tubular Handles
for Overlay Panels
1/4" Black Acrylic Panels
1/4" White Acrylic Panels
1/4" Stainless Steel Panels
ZPW420D
ZPS420D
36" Side-by-Side Refrigerators
Models
Custom Options
Stainless Steel Tubular Handles
for Overlay Panels
1/4" Black Acrylic Panels
1/4" White Acrylic Panels
1/4" Stainless Steel Panels
ZPW360D
ZPS360D
ZPS360D
36" Bottom-Freezer Refrigerators
Models
Custom Options
Stainless Steel
Tubular Handles for
Overlay Panels
ZKHCSS2
ZKHCSS2
Unified Grille Kit
1/4" Black Acrylic Panels
1/4" White Acrylic Panels
1/4" Stainless Steel Panels
ZUG2
ZPBC360
ZPWC360
ZPSC360
ZUG2
ZPBC360
ZPWC360
ZPSC360
ZIC360NMRH ZIC360NMLH
ZICS360NMRH ZICS360NMLH
ZUGSS2
ZUGSS2
36" All-Refrigerators and All-Freezers
Models
All-Refrigerators
All-Freezers
Custom Options
Stainless steel panels
White Lexan® panels
Black Lexan® panels
Custom handle kit for
framed 1/4"-thick panels
Tubular stainless steel
handles for 1/4"-thick panels
3/4"-thick custom panel kit
Custom handles for overlay
3/4"-thick custom panels
Tubular stainless steel
handles for 3/4"-thick
custom panels
Adjustable grille height kit
Unified Grille Panel Kit for
side-by-side installation
22
Stainless steel, white or
black panels.
Factory-installed trim will accept
1/4"-thick accessory panels which
are cut to size and ready to install.
These panels must be ordered
separately.
ZIR36NMRH
ZIF36NMRH
ZIR36NMLH
ZIF36NMLH
ZIRS36NMRH
ZIFS36NMRH
ZIRS36NMLH
ZIFS36NMLH
ZWSR36
ZWWR36
ZWBR36
ZWSR36
ZWWR36
ZWBR36
ZKHR1
ZKHR1
ZKHRSS1
ZKTR36RH
ZKHRSS1
ZKTR36LH
ZKHTR1
ZKHTR1
ZKHTRSS1
ZGC2
ZKHTRSS1
ZGC2
ZGCSS36RH
ZGCSS36LH
ZUG75
ZUG75
ZUGSS
ZUGSS
monogram.com
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Free-Standing Stainless Steel—Wrapped Refrigerators
General Features
QUICK
QUICK
ICE
ICE
RESET
WATER
RESET
FILTER
WATER
DOOR
LOCK
FILTER
DOOR
ALARM
CONTROL
ALARM
CONTROL
LOCK
Extra-tall dispenser. Accommodates glassware of all sizes,
from blenders to pitchers.
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
ENERGY STAR®-qualified. As an ENERGY STAR partner, GE has
determined that the ZFSB26DNSS and ZFSB23DNSS meet
the ENERGY STAR guidelines for energy efficiency.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
36" Free-Standing
Side-by-Side
Refrigerator
36" Free-Standing
Side-by-Side
Counter-Depth
Refrigerator
ZFSB26DNSS
ZFSB23DNSS
Overall Dimensions
(WxHxD in inches):
36 x 72 x 34 (including handles)
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 490
Overall Dimensions
(WxHxD in inches):
36 x 72 x 29.5 (including handles)
115 Volts/20 Amps
Approx. Shipping Wt. (lbs.) 490
■ 25.5 cu. ft. Capacity
■ ENERGY STAR®-Qualified
■ Concealed Door Hinge
■ 22.6 cu. ft. Capacity
■ ENERGY STAR®-Qualified
■ Concealed Door Hinge
23
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
Climate-control drawer. Functions like a refrigerator within
the refrigerator. Precise controls allow you to express-chill
beverages, express-thaw meats and select specific
temperatures for perishable foods.
Advance Planning for Free-Standing Refrigerators
Door Swing Clearances
Product Dimensions
27-1/2"
32"
The installation must allow for clearances to adjacent
walls or cabinets. These refrigerators are factory set for
a 160° door swing.
ZFSB26 and ZFSB23
14-1/4"
72"
19"
72"
160° Door Swing
36"
34"
Including
Handles
29-1/2"
Including
Handles
ZFSB26DNSS
ZFSB23DNSS
36"
Installation Note:
Door and passageways into the installation location
require a 36" minimum opening. If the opening is less
than 36", the top cap and doors must be removed. See
installation instructions for details.
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
Note: GFI (ground fault interrupter) is not recommended.
Water Line
The water line can enter the opening through the floor
or back wall. Route 1/4" O.D. copper tubing or GE
QuickConnect kit between the cold water line and the
water connection location at the rear of the refrigerator.
The installation of an easily accessible shut-off valve in
the water line is required.
24
160°
ZFSB26 ZFSB23
90° Door Swing
28" 24"
22" 22"
4" Min.
to Wall
Allow 19" minimum clearance on the fresh food side for
a full 160° door swing and pan removal. Allow 14-1/4"
clearance on the freezer side for removal of ice bin.
• 4" minimum clearance is required when the door
swing is restricted to 90°.
Air Circulation Clearances
Allow 1/8" on each side and 1" at the top and back side
for proper air circulation.
monogram.com
Wine Reserve and
Beverage Center
ON
COLD
ON
COOL
OFF
OFF
Wine Reserve
Beverage Center
Automatic
Icemaker
ZDWC240NBS
ZDBC240NBS
ZDIS15CSS, ZDI15CWW and
ZDI15CBB
Overall Dimensions*
(WxHxD in inches):
23-1/2 x 33-1/2 x 22-1/2
Amps @ 120 Volts
Approx. Shipping Wt. (lbs.)
Overall Dimensions*
(WxHxD in inches):
23-1/2 x 33-1/2 x 22-1/2
Amps @ 120 Volts
Approx. Shipping Wt. (lbs.)
Overall Dimensions
(WxHxD in inches):
14-13/16 x 34-1/2 x 23-5/16
Amps @ 120 Volts
5.3
Approx. Shipping Wt. (lbs.) 110
2
163
2
130
■ Built-In or Free-Standing
Installation
■ Factory-Installed Black
Toekick, Stainless Toekick
Included
■ Unfinished Cherry Wood
Shelf Fronts Can Be
Customized
■ Reversible Door Swing, No
Kit Required
■ Built-In or Free-Standing
Installation
■ Factory-Installed Black
Toekick, Stainless Toekick
Included
■ Unfinished Cherry Wood
Wine Shelf Fronts Can Be
Customized
■ Reversible Door Swing, No
Kit Required
*Height excluding legs, including
hinge; depth excluding handle
*Height excluding legs, including
hinge; depth excluding handle
■ Built-In or Free-Standing
Installation
■ Accepts 3/4" Custom
Panels, Requires Kit
■ Reversible Door Swing, No
Kit Required
■ Leveling System
General Wine Reserve Features
General Icemaker Features
Temperature control. Adjustable thermostat can maintain
the ideal temperature for aging or serving, with a
temperature range from the mid-40s to mid-60s Fahrenheit.
High production, large capacity.The icemaker produces
up to 50 pounds of clear ice per day and automatically
shuts off when the 25-pound-capacity bin is full.
Storage convenience. With the capacity to store up to
57 wine bottles, the wine reserve keeps your favorite
vintages close at hand. Full-extension sliding shelves
provide fast, easy access.
Customization.The 15" icemaker door accepts a 3/4"
custom panel to match surrounding cabinetry. You can
also add your own custom handle.
General Beverage Center Features
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
COOL
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
Temperature control. Precise temperature settings allow
you to maintain the ideal climate for your beverages
of choice.
Storage convenience.The beverage center holds up to
12 wine bottles, as well as 12-oz. cans, quart-size bottles
and two-liter plastic containers. Removable spillproof
glass shelves and two full-extension wine racks offer
easy access.
25
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
OFF
OFF
COLD
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Automatic Icemaker
Advance Planning for Wine Reserve and Beverage Center
The Installation Space
Door Swing Clearances
The Monogram Wine Reserve and Beverage Center may
be installed free-standing or below a countertop.
Both models are factory set for a right-hand door swing
with the door swinging from left to right. The door swing
may be reversed to a left-hand swing. No kits required.
• The installation must allow for clearances to adjacent
walls or cabinets. The Wine Chiller and Beverage Center
are factory set for a 110° door swing.
Locate
Outlet
10" Minimum
to Wall
24" Min.
34-1/2"-35"
6" Max.
24" Max.
22-7/8"
110° Door Swing
90° Door Swing
34-1/4"
23-5/8"
110°
24-3/8"
Including Handle
Frameless Cabinets: If installing between frameless
cabinets, a 1/2"-wide filler strip or side panel may be
required on the hinge side. The filler strip will act as a
spacer between the door case and adjacent cabinet and
will prevent interference with cabinet door swing. The
width of the opening must include filler panels.
The wine reserve or beverage center may be closed in
on the top and sides as long as the front is unobstructed
for air circulation and proper access to the door.
• Do not install these products where the temperatures
will go below 55° (13°C) or above 90° (32°C). Do not
install where they will be subject to direct sunlight,
heat or moisture.
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
Electrical must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
26
90°
4" Minimum
to Wall
23-1/2"
Note: The door should protrude 1" beyond the surrounding
cabinets.
20-7/8"
• Allow 10" minimum clearance on the hinge side for a
full 110° door swing.
• 4" minimum clearance is required for the shelves to
slide out when the door swing is restricted to 90°.
Black or Stainless Steel Toekick Options
Monogram Beverage Centers and Wine Reserves are
shipped with a black toekick installed. An optional stainless
steel toekick is also supplied with each product.
Side-by-Side Installations
For a complete refreshment center, install a Monogram
Wine Reserve and Beverage Center together.
• Products must operate from separate properly
grounded receptacles.
monogram.com
The Installation Space
Drainage Requirements
The Monogram Icemaker may be installed
free-standing or below a countertop.
A method of drainage must be determined in advance.
28-1/2"
9"
15"
7-1/2"
15"
Locate Standpipe in exact
Center of The Cutout
Drain
Hose
1"
3-1/2"
Water and Electrical Supply
Should Enter from Back
Wall in Shaded Area.
23-5/16" to
Door Front
Side
View
BUILT-IN BOTTOM-FREEZER
REFRIGERATORS
34" to
34-1/2"
3-1/2"
High
34" Min.
Adjustable
to 34-1/2"
14-13/16"
Frameless Cabinets: If installing between frameless
cabinets, or when a 3/4" custom panel is used, a 1/2"-wide
filler strip or side panel may be required on the hinge
side. The filler strip will act as a spacer between the door
case and adjacent cabinet and will prevent interference
with cabinet door swing. The width of the opening must
include filler panels.
The icemaker may be closed in on the top and sides as
long as the front is unobstructed for air circulation and
proper access to the door.
• Do not install these products where the temperatures
will go below 55° (13°C) or above 110° (32°C).
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall
as shown.
Water Line
The water line can enter the opening through the back
wall as shown. Route 1/4" O.D. copper tubing between
the cold water line and the water connection location at
the rear of the icemaker. The installation of an easily
accessible shut-off valve in the water line is required.
Custom Panel Kits
Order ZIP75WW, white or ZIP75BB, black, 3/4" trimless
custom panel kit.
• Order the panel so that
approximately 1/2" of the back
side edge is finished. The back
3/4"
Thick
29-1/2"
edge of the panel will be visible
Custom
and therefore should be finished.
Panel
• Custom handles may be used
with this kit.
• A side filler panel may be
14-23/32"
required on the hinge side to
ensure a full door swing.
22"
22-3/4" With 3/4"
Custom Panel
• The ideal installation has a standpipe with a 2" to 1-1/2"
PVC drain reducer installed directly below the outlet of
the drain tube. The standpipe must be accurately located
to prevent interference when sliding the icemaker into
the opening.
• The installation of a 3/4" custom door panel will
influence the floor drain location.
• When a floor drain is not located below the icemaker,
order ZPKI Drain Pump Kit. This pump fits into the
icemaker base.
Door Swing Clearances
The icemaker is factory set for a right-hinge door swing
with the door swinging from left to right. The door swing
may be reversed to a left-hinge swing. No kits required.
• The installation must allow for clearances to adjacent
walls or cabinets. The icemaker is factory set for a 110°
door swing.
90° Door Swing
110° Door Swing
21-1/2"
WALL
24" 3"
Min.
Note: The addition of a
3/4" thick custom panel
will result in a front to
back depth of 24-1/16".
15-1/2"
90°
110°
2" Minimum
to Wall
5-1/2" Minimum
to Wall
• Allow 5-1/2" minimum clearance on the hinge side for a
full 110° door swing.
• 2" minimum clearance is required for access to the ice
bin when the door swing is restricted to 90°.
27
WINE RESERVE/
FREE-STANDING SIDE-BY-SIDE BUILT-IN ALL-REFRIGERATORS
BEVERAGE CENTER/ICEMAKER
REFRIGERATORS
AND ALL-FREEZERS
11-1/2"
BUILT-IN SIDE-BY-SIDE
REFRIGERATORS
Advance Planning for Automatic Icemaker
Dishwashers
S
OPTION
START
Y
SMARTDR
HEAVY
DUTY
NORMAL
WASH
LIGHT
WASH
WATER
TEMP
DELAY
START
HEAT
START
NORMAL
START
CANCEL
HOLD/MIN
RINSE
ONLY
S
CYCLE
WASH
HIGH
TEMP
POTS
& PANS
• HOLD
• SEC
CANCEL
RINSE
ONLY
SENSING
WASHING
RINSING
DRYING
CLEAN
POTS
PANS
NORMAL
DRY
& HEAT
TEMP
DRY
NORMAL
WASH
SPEED
WASH
HIGH
& HEAT
&
NORMAL
WASH
CHINA
CRTSTAL
SANI
WASH
HEATED
DRY
WATER
TEMP
DELAY
START
CANCEL
HOLD/MIN
SENSING
WASHING
RINSING
DRYING
CLEAN
SANITIZE
CHINA
CRYSTAL
gram.
Mono
Fully Integrated
Dishwasher
Fully Wrapped
Dishwasher
Professional Series
Dishwasher
Built-In
Dishwasher
ZBD7100GSS* and ZBD7000GII
ZBD6900GSS
ZBD6600GSS
ZBD6500GSS, ZBD6400GWW
and ZBD6400GBB
Overall Dimensions
(WxHxD in inches):
23-5/8 x 34–35 x 23-1/2
Amps @ 120 Volts
12.0
Approx. Shipping Wt. (lbs.) 125
Overall Dimensions
(WxHxD in inches):
23-5/8 x 34–35 x 23-1/2
Amps @ 120 Volts
12.0
Approx. Shipping Wt. (lbs.) 125
Overall Dimensions
(WxHxD in inches):
23-5/8 x 34–35 x 23-1/2
Amps @ 120 Volts
12.0
Approx. Shipping Wt. (lbs.) 135
Overall Dimensions
(WxHxD in inches):
23-5/8 x 34–35 x 23-1/2
Amps @ 120 Volts
12.0
Approx. Shipping Wt. (lbs.) 125
■ ADA-Compliant Installation
Below 34"-High Countertops
■ A Custom Panel and Handle
is Required on Model
ZBD7000GII
■ Accepts Custom Toekick
■ ADA-Compliant Installation
Below 34"-High Countertops
■ Contemporary Fully Wrapped
Stainless Steel
■ Accepts Custom Toekick
■ ADA-Compliant Installation
Below 34"-High Countertops
■ Accepts Custom Toekick
■ ADA-Compliant Installation
Below 34"-High Countertops
■ Accepts 3/4" or 1/4" Custom
Panels
■ Accepts Custom Toekick
*Fully integrated stainless steel
General Features
Unbelievably quiet. Wash action sounds are minimized
through the use of advanced hydrodynamics. So when
you’re on the phone or talking to friends, these
dishwashers will never be part of the conversation.
World-class washing. Smart, soil-seeking sensors know
how hot, how strong and how long wash cycles should
run. Powerful five-level wash performance easily handles
heavily soiled loads.
Powerful forced-air drying system. A fan-assisted, vented
drying system extracts moist, warm air. Dishes come out
dry, ready for the table or shelf.
Racks. Intelligent design, intuitive moves. Rilsan™
nylon-coated racks adjust and adapt to all types of loads.
Ball-tipped tines cradle dinnerware safely and securely.
28
NSF certified. NSF certified to reduce 99.999% of bacteria.
ENERGY STAR®-qualified. As an ENERGY STAR Partner, GE
has determined that the ZBD7100GSS, ZBD7000GII,
ZBD6900GSS, ZBD6600GSS, ZBD6500GSS,
ZBD6400GWW and ZBD6400GBB meet the ENERGY STAR
guidelines for energy efficiency.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
monogram.com
S
OPTION
START
NORMAL
WASH
LIGHT
WASH
WATER
TEMP
DELAY
START
HEAT
START
NORMAL
CANCEL
HOLD/MIN
S
CYCLE
RINSE
ONLY
WASH
HIGH
TEMP
HEAVY
DUTY
• HOLD
NORMAL
DRY
& HEAT
TEMP
DRY
NORMAL
WASH
SPEED
WASH
• SEC
CANCEL
RINSE
ONLY
SENSING
WASHING
RINSING
DRYING
CLEAN
HIGH
& HEAT
SANITIZE
LIGHT
WASH
Fully Integrated
Chef ’s Washer
Fully Wrapped
Chef ’s Washer
Professional Series
Chef ’s Washer
ZBD7105GSS* and ZBD7005GII
ZBD6905GSS
ZBD6605GSS
Overall Dimensions
(WxHxD in inches):
23-5/8 x 34–35 x 23-1/2
Amps @ 120 Volts
12.0
Approx. Shipping Wt. (lbs.) 125
Overall Dimensions
(WxHxD in inches):
23-5/8 x 34–35 x 23-1/2
Amps @ 120 Volts
12.0
Approx. Shipping Wt. (lbs.) 125
Overall Dimensions
(WxHxD in inches):
23-5/8 x 34–35 x 23-1/2
Amps @ 120 Volts
12.0
Approx. Shipping Wt. (lbs.) 135
■ ADA-Compliant Installation
Below 34"-High Countertops
■ A Custom Panel and Handle
is Required on Model
ZBD7005GII
■ Accepts Custom Toekick
■ Not Recommended For Use
as Primary Dishwasher
■ ADA-Compliant Installation
Below 34"-High Countertops
■ Accepts Custom Toekick
■ Not Recommended For Use
as Primary Dishwasher
■ ADA-Compliant Installation
Below 34"-High Countertops
■ Accepts Custom Toekick
■ Not Recommended For Use
as Primary Dishwasher
C O M PAC TO R S
Y
SMARTDR
HEAVY
DUTY
D I S H WAS H E R S A N D
C H E F ’ S WAS H E R S
Chef ’s Washers
*Fully integrated stainless steel
General Features
Shhh. Chef at work. From the steel-wrapped tub to the
new motor suspension system, quiet has been designed
into every phase of operation, virtually eliminating noise
and vibration.
Finally, wash power for pots and pans. Specially designed
cycles provide intense wash and rinse action to handle
baked-on foods. Hotter water and longer cycles easily
tackle your dirtiest cookware.
Racks for big bowls, sticky spoons, greasy pots.
Adjustable, Rilsan nylon-coated racks are uniquely spaced
for flexibility. The deep lower rack accommodates items
up to 15" tall. Extra wheels on the racks balance large,
heavy loads.
Advanced drying system. Moist, warm air is continually
extracted from the tub. Fan-assisted venting leaves
cookware thoroughly dry and ready to use.
NSF-certified.The Chef’s Washer is the only appliance
certified to meet the new NSF Pots and Pans Protocol.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
29
Advance Planning for Dishwashers and Chef ’s Washers
Monogram® Dishwashers and Chef's Washers are
designed for versatility, adaptable to virtually any
installation.
The Installation Space
• All models have a full-length door or a modified door
to accept a full cabinet panel, without a traditional
access panel.
Adjust Side Trim
• The dishwasher must be installed so that the drain hose is
no more than 10 feet in length for proper drainage.
• Side tub flange trim
is adjustable and will
conceal any slight gap
between the dishwasher
and adjacent cabinetry.
to Meet Cabinetry
Standard installation in 24"-deep cabinets
• In standard 24"-deep cabinets, the dishwasher door
will be flush with adjacent cabinetry.
• Models with a 3/4"-thick custom door panel will fit
flush with adjacent cabinetry.
Supplied or custom toekick
• A 2-piece toekick is supplied with all models. The
toekick is height- and depth-adjustable.
• Depending on cabinetry style, a custom toekick can
also be installed to match cabinetry. Care must be
taken to assure door swing
clearance above the
toekick.
• To prevent siphoning, an air gap must be used when the
waste tee or disposer connection is less than 18" above
the floor.
This Wall Area Must be
Free of Pipes or Wires
1-3/4"
24"
min.
34" to 35"
Floor to
Underside of
Countertop
6"
24-1/4" Max.
23-7/8" Min.
Plumbing and Electric Service
Plumbing
and Electric
Must
Enter Inside
This Service
Area
Must Enter Inside This Area
34" - 35"*
23-1/2"
23-5/8"
*Optional 32-1/2" ADA Installation Height.
Requires a Custom Toekick
Electrical Requirements
Notched
Continuous Toekick
ADA-Compliant:
Installation below 34"-high countertops
A reduced height installation (32-1/2" min.) beneath
a 34" countertop can be accomplished by removing
the front leveling legs. The rear legs should be screwed in
flush with the bottom support, as shipped. The front
of the dishwasher must be shimmed to level it. Water
and electrical must be routed through the back wall.
30
• Water and power supply should enter in the
shaded area.
• Electrical and water connections are at the right front
of the dishwasher. The hot water line should extend
forward 30" to 40" from the rear wall. The electrical
must extend forward at least 24" to reach the
junction box.
• These dishwashers may be installed beneath
countertops of stone or other materials that will not
accept screws.
• A notched continuous
toekick may be necessary
to allow a long door
panel, on models
ZBD7000 and ZBD7005,
to swing back and under
the dishwasher.
The rough cabinet opening must be prepared to the
dimensions shown.
• All models are ADA-Compliant. Models ZBD7000 and
ZBD7005 offer even more installation and design
flexibility. For these models the required custom door
panel may be sized from 26-1/4" to 30-1/4" height. A
custom toekick is required.
The dishwasher must be supplied with 120V, 60Hz, and
connected to an individual properly grounded branch
circuit protected by a 15- or 20-amp circuit breaker or
time-delay fuse.
monogram.com
D I S H WAS H E R S A N D
C H E F ’ S WAS H E R S
Advance Planning for Dishwashers and Chef ’s Washers
Custom Panels
Custom Panel for Models ZBD7000 and ZBD7005
Full-size template, mounting hardware and complete
installation instructions shipped with the product.
1/4" Custom Panel Kit for ZBD6400 ONLY
Order ZPF625B (black)
Order ZPF625W (white)
1/4"-Thick
1/4" Thick
Door Panel
Door
Cabinets
Side
View
1/4"
Radius Cut
Custom
Panel Size
Countertop
25-5/16"
A
Floor
3/4" Custom Panel Kit for ZBD6400 ONLY
Order ZPF675B (black)
Order ZPF675W (white)
Height is equal to A minus 1/4"
STEP A: Determine custom panel height
Top
Cabinets
3/4"-Thick
3/4"
Thick
Door Panel
Panel
Door
Dim. A*
Floor
Bottom of
Adjacent Cabinetry
3/4" Max.
B
3/4" Max.
Bottom of
Adjacent Cabinetry
Custom
Panel Size
Countertop
C O M PAC TO R S
23-1/8"
1. Measure Dimension A from underside of
countertop to bottom of adjacent cabinets.
*Height
23-1/8"
The custom panel height varies depending on the
installation.
*Height is equal to A minus 5-1/4" plus 1/4"
EXAMPLE: A = 30-1/2" minus 5-1/4", plus 1/4"
is equal to 25-1/2"
2. Subtract 1/4". This allows a 1/4" clearance gap
between the underside of the countertop and
the top of the dishwasher door.
Width is equal to B minus 1/4"
STEP B: Determine custom panel width
1. Measure dimension B, the rough opening width.
2. Subtract 1/4" for clearance (1/8" on each side).
Note: 23-1/8" min. panel width and 26-1/4" min. panel
height are required to cover the door frame. Panel
height varies depending on installation. Consideration
must be given to door swing clearance above the toekick.
1. Measure Dimension A from underside of
countertop to bottom of adjacent cabinets.
2. Subtract 5-1/4". Control panel height is 5".
Allow 1/4" clearance between countertop
and control panel.
3. Add 1/4". The custom panel slides up
behind the control panel.
ADA Installation beneath 34"-high countertops
Use the same methods shown here to calculate the door
panel height. A notched continuous toekick will help
prevent door swing interference and maintain alignment
with adjacent cabinets.
31
Compactors
General Features
Customization.The standard black/white drawer panel is
reversible. The drawer accepts 1/4" or 3/4" panels and also
custom handles.
Twelve-inch width.The slim design conserves space and
permits attractive integration into kitchen décor or cabinetry
of other rooms in the home.
Powerful pressure. Up to 5000 pounds of compressive
force reduces trash volume by 75 percent, allowing easy
transport and disposal.
Safe operation. A removable key locks the compactor,
starts operation, and assures that the drawer remains
locked during use.
Compactors
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
Overall Dimensions
(WxHxD in inches):
12 x 34 – 35 x 20-1/4
Amps @ 120 Volts
5.0
Approx. Shipping Wt. (lbs.) 135
ZCG3500DSS, ZCG3100VBB and
ZCG3300VWW
■ Built-In Installation Only
■ No Trim Kits Required for
Customization
Advance Planning for Compactors
For an extra touch of convenience, the Monogram®
built-in compactor fits in a neat 12" space.
Custom Panel Dimensions
The drawer panel size varies depending on application.
• This compactor is designed for built-in applications
only. It cannot be used free-standing.
• This compactor has an adjustable base which allows the
toekick depth to be set to match adjacent cabinetry.
• The drawer trim on black and white models accepts
1/4" and 3/4" custom panels. No trim kits required.
When a 3/4"-thick panel is used, the handle may be
replaced with a custom handle of your choice.
24-1/2"
1/4" Custom
Drawer
Panel
11-11/16"
24-3/4"
3/4" Custom
Drawer
Panel
12"
25-13/16"
3/4" Custom
Drawer
Panel With
Custom
Handles
12"
1/4"-Thick Custom Panel
Cut the panel to size and install.
12-1/8"
min.
34"-35"
3/4"-Thick Custom Panel
The custom panel should be constructed in the same
manner as typical cabinet doors. Cut edges must be finished on all sides.
20-1/4"
34"
min.
adj. to
35"
max.
22-1/2" min.*
*Add 2-1/2" to
depth if outlet
is located directly
behind compactor
12"
32
Adjustable base
2-3/4" to 4-1/4"
3/4"-Thick Custom Panel with Custom Handle
The supplied handle may be replaced with a custom
handle of your choice.
monogram.com
G AS C O O K TO P S
Gas Cooktops
Stainless Steel Gas Cooktop
General Features
LO
SIM
SIM
LO
HI
HI
OFF
HI
Continuous grates.The graceful composition of curves
and tapered points is further enhanced with heavy-duty,
porcelain-enamel coating. Interlocking design creates a
stable surface for easy pot movement.
Wok ring. A stainless steel wok ring is included for the
center burner. It locks into place on the grate and
accommodates most standard woks.
Ergonomically designed controls.There is an “On” indicator
light on the bezel of each knob, and the tactile surface
makes them easy to grip and turn.
HI
OFF
OFF
36" Stainless
Steel Gas Cooktop
ZGU375NSDSS (natural gas)
ZGU375LSDSS (liquid propane)
Overall Dimensions
(WxHxD in inches):
36-1/2 x 5-1/2 x 20-5/8
Amps @ 120VAC
Approx. Shipping Wt. (lbs.)
E L E C T R I C C O O K TO P S
60,000 total BTUs of cooking power.The cooktop is
equipped with one 15,000-BTU burner, two 12,000-BTU
burners and two 10,500-BTU burners.
OFF
HI
OFF
Silent, precise simmering.The simmer flame silently
delivers a consistent 140°F, without cycling on and off.
LO
SIM
LO
SIM
LO
SIM
Sophisticated design.The graceful front edge forms a
subtle arc, and the burner grates are uniquely configured
to convey a sophisticated look.
5.0
78
■ Approved Installation
Over European Wall Oven
or Warming Drawer
■ Natural or LP Gas Must Be
Specified by Model Number
Gas-on-Glass Cooktop General Features
Sophisticated styling.The front edge bows slightly to form
an attractive, soft arc that complements other Monogram®
appliances.
LO
HI
LITE
OFF
LO
HI
LO
HI
LITE
LITE
OFF
OFF
Precise, versatile temperature control.The burners
provide a range of heat intensities: one 15,000-BTU
burner, one 11,000-BTU burner, one 9100-BTU and two
6000-BTU burners.
36" Gas-on-Glass
Cooktop
Continuous grate design. Heavy pots are easy to slide
from burner to burner. The cast-iron grates are coated in
porcelain enamel and are dishwasher safe.
ZGU36GGSDSS,
ZGU36GGTDWW and
ZGU36GGBDBB
Soft-touch control knobs.Tactile knobs are pleasing to the
touch and eye.
Overall Dimensions
(WxHxD in inches):
36 x 3-1/16 x 21-7/16—SS
36 x 3-1/16 x 21-1/4—WW/BB
Amps @ 120VAC
5.0
Approx. Shipping Wt. (lbs.) 59
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
LO
HI
LO
HI
LITE
LITE
OFF
OFF
Monogram.
■ Approved Installation
Over Wall Oven or
Warming Drawer
■ LP Gas Conversion Kit
Included
33
Advance Planning for Gas Cooktops
Stainless Steel Gas Cooktop
Gas-on-Glass Cooktops
Stainless steel cooktops are factory set for natural or
liquid propane gas. Be sure to order the correct model
for your installation.
Gas-on-glass cooktops are factory set for natural gas
operation. They can be converted to LP operation with a
conversion kit shipped with the cooktop.
Note: Conversion kits are available if the wrong gas type
is ordered. The kits must be installed by a qualified service
technician at additional cost.
Electrical Requirements
Order WB49X10087 for Natural to LP.
Order WB49X10088 for LP to Natural.
• A 42"-wide base cabinet is recommended to allow
space for hold-down clips.
This cooktop requires a 120V, 60Hz power supply. A
separate circuit, protected by a 15-amp time-delay fuse
or circuit breaker, is required. The receptacle should be
checked by a qualified electrician
for correct polarity and
21-7/16" SS
21-1/4" B/W
proper grounding.
Deep at Center
36"
Electrical Requirements
This cooktop requires a 120V, 60Hz power supply. A
separate circuit, protected by a 15-amp time-delay fuse or
circuit breaker, is required. The receptacle should be
checked by a qualified electrician
20-5/8" Deep
at Center
for correct polarity and
36-1/2"
11-9/16"
proper grounding.
5-1/2"
3-3/8" Min.
to Rear Vertical
Combustibles
7"
18-7/8"
3-1/16"
2-1/4" Min.
to Rear Vertical
Combustibles
6" Min.
Cutout
To Side
Walls
33-7/8"
19-1/8"
2-1/2"
Min. From
Front of
Countertop
Min.
Cutout
To Side
Walls
ZGU375NSDSS Natural Gas
ZGU375LSDSS LP
16"
ZGU36GGSDSS
Black with stainless steel trim
ZGU36GGBDBB Black
ZGU36GGTDWW White
35-5/16"
2-3/4"
Min. From
Front of
Countertop
1" Min. Forward of
Back of Cutout
Locate the gas on the right side, 1" forward
of the back of the cutout. Install an electrical
outlet 12" below the countertop.
8"
42" Wide
42"-Wide
Cabinet
Base
Cabinet Base
Recommended
Locate gas and electrical supply within the
Recommended
shaded area. The locations shown are for a
42" base cabinet; adjust when using other cabinet sizes.
These cooktops are designed to operate at 5" water
column pressure. A regulator is required at the natural
gas source to provide a maximum of 7" water pressure
to the cooktop regulator.
Gas Supply
• When converted to liquid propane operation, they are
designed to operate at 10" water column pressure. A
regulator is required at the LP source to provide a
maximum of 14" water pressure to the cooktop regulator.
• The natural gas model is designed to operate at 5"
water column pressure. A regulator is required at the
natural gas source to provide a maximum of 7" water
pressure to the cooktop regulator.
• The liquid propane model is designed to operate at 10"
water column pressure. A regulator is required at the
LP source to provide a maximum of 14" water pressure
to the cooktop regulator.
Combination Installations
34
Gas Supply
Combination Installations
Consideration must be given to gas and electrical supply
locations when the cooktop is installed with other products
in the same cabinet. Always refer to each product
installation instruction for clearances and electrical
requirements.
Consideration must be given to gas and electrical supply
locations when the cooktop is installed with other products
in the same cabinet. Always refer to each product
installation instruction for clearances and electrical
requirements.
• Install these cooktops with any 36" or wider exhaust
hood with 300 CFM or greater air flow rating.
• Install these cooktops with any 36" or wider exhaust
hood with 350 CFM or greater air flow rating.
• This cooktop may be installed above a Monogram 30"
warming drawer. See Warming Drawers for details.
• This cooktop may be installed in combination with a
Monogram 36" downdraft vent or above a Monogram
30" warming drawer. See Downdraft Vents and Warming
Drawers for details.
• This cooktop may be installed above a Monogram
single oven.
• This cooktop may be installed in combination with a
Monogram 36" downdraft vent. See Downdraft Vents
for details.
monogram.com
G AS C O O K TO P S
Electric Cooktops
Digital Electronic Cooktop
General Features
Digital controls.The easy-to-use, touch-activated controls
are identified by simple graphics printed on the glass
cooking surface.
Dual elements. Designed to accommodate small to large
pan sizes, these elements reduce energy loss and optimize
cooking performance.
Pan size and presence sensors. Each dual element has an
intuitive sensor that selects either a small or large element,
depending on the size of the pan. If the pan is removed
for more than a minute, the sensor will automatically shut
off the element.
Full-function warmer. Positioned at center on 36" models
and right rear on 30" models, the convenient warmer
offers three warm settings, in addition to the 11 standard
heat settings.
TIMER
SENSORS
TIMER
SENSORS
36" Ribbon Digital
Electric Cooktop
30" Ribbon Digital
Electric Cooktop
ZEU36RSFSS, ZEU36RWFWW
and ZEU36RBFBB
ZEU30RSFSS, ZEU30RWFWW
and ZEU30RBFBB
Overall Dimensions
(WxHxD in inches):
36-1/8 x 6-1/4 x 21-1/4—SS
36 x 6-1/4 x 21-1/8
Amps @ 240VAC
40
208VAC
30
Approx. Shipping Wt. (lbs.) 56
Overall Dimensions
(WxHxD in inches):
29-7/8 x 6-1/4 x 21-3/4—SS
29-3/4 x 6-1/4 x 21-5/8
Amps @ 240VAC
40
208VAC
30
Approx. Shipping Wt. (lbs.) 43
■ Approved Installation Over
Monogram Wall Oven or
Warming Drawer
■ Approved Installation Over
Monogram Wall Oven or
Warming Drawer
E L E C T R I C C O O K TO P S
Rapid Hi/Lo burner cools down up to three times faster
than an electronic standard burner. Most high-end
electronic cooktops deliver fast heating response, but
Monogram’s digital electric cooktop with rapid Hi/Lo
burners also offers quick cool-down capability. Rapid
reduction in heat helps prevent sauces from boiling over
or burning.
Electric Cooktop General Features
Cooking versatility. Elements vary from 6" to 9" in diameter
and can be expanded to suit your cooking needs.
LO
9
7
LO
LO
H
8
9
9
8
8
7
5
3
7
2
3
3
4
6
1
2
2
1
4
6
5
6
ON
HOT SURFACE
OFF
OFF
H
LO
9
7
3
3
7
8
9
8
2
2
1
1
Monogram.
I
LO
H
I
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
1
Solid surface finishes.The cooktop surfaces are completely
solid for a dramatic “true black” or “true white” appearance.
H
I
I
Cooking performance. Responsive ribbon elements allow
you to simmer and sauté precisely according to recipe. An
infinite range of heat settings leaves plenty of room for
improvisation.
5
I
H
4
OFF
OFF
OFF
Bridge burner. Ideal for larger pans, this burner connects
two 7" elements to form an elliptical cooking zone.
4
5
6
4
5
6
36" Ribbon
Electric Cooktop
ZEU769SCSS, ZEU769TCWW
and ZEU769BCBB
Overall Dimensions
(WxHxD in inches):
36 x 3-1/4 x 20-3/8
Amps @ 240VAC
208VAC
Approx. Shipping Wt. (lbs.)
40
30
45
■ Cannot Be Installed
Over a Wall Oven or
Warming Drawer
35
Advance Planning for Electric Cooktops
Electrical Requirements
Combination Installations
Product rating is 120/208 or 120/240V, 60Hz. For 240V,
connect to a 40-amp circuit; connect to a 30-amp circuit for
208V operation. The cooktops must be connected to a
supply circuit of the proper voltage and frequency and
protected by a time-delay fuse or circuit breaker.
Consideration must be given to electrical supply locations
when the cooktop is installed with other products in the
same cabinet. Always refer to each product installation
instruction for clearances and electrical requirements.
3-1/4"
6-1/4"
16" Min
Junction
Box
5-1/2"
All models require 5" minimum clearance
below the cooktop bottom to combustible
materials.
ZEU30RSFSS
Black with stainless steel trim
ZEU30RBFBB Black
ZEU30RWFWW White
A
2" Min.
to Side Walls
28-1/2"
19-5/8"
2-1/2" Min.
to Front Edge
30" Digital Cooktop (in inches)
ZEU30RSFSS
ZEU30RBFBB
ZEU30RWFWW
A
B (at center)
29-7/8"
29-3/4"
29-3/4"
21-5/8"
21-1/2"
21-1/2"
ZEU36RSFSS
Black with stainless steel trim
ZEU36RBFBB Black
ZEU36RWFWW White
A
B
2" Min.
to Side Walls
1-3/4"
Min.
19-1/8"
33-7/8"
2-1/2" Min.
to Front Edge
36" Digital Cooktop (in inches)
ZEU36RSFSS
ZEU36RBFBB
ZEU36RWFWW
36
A
B (at center)
36-1/8"
36"
36"
21-1/4"
21-1/8"
21-1/8"
• The 30" cooktop may be installed in combination with
a Monogram® 30" downdraft vent. Install 36" cooktop
with a 36" downdraft vent. See Downdraft Vents
for details.
• A 27" warming drawer may be installed beneath a 30"
digital cooktop, and a 30" warming drawer may be
installed beneath a 36" digital cooktop.
• A Monogram single oven may be installed below these
cooktops.
B
1-3/4"
Min.
• Install these cooktops with any exhaust hood of the
same or greater width; 300 CFM or greater air flow
rating is recommended.
monogram.com
Electrical Requirements
Combination Installations
Product rating is 120/208 or 120/240V, 60Hz. For 240V,
connect to a 40-amp circuit; connect to a 30-amp circuit for
208V operation. The cooktop must be connected to a
supply circuit of the proper voltage and frequency and
protected by a time-delay fuse or circuit breaker.
Consideration must be given to electrical supply locations
when the cooktop is installed with other products in the
same cabinet. Always refer to each product installation
instruction for clearances and electrical requirements.
36"
20-3/8"
*3-1/4"
33-7/8"
19-1/8"
Junction
Box
• The cooktop may be installed with a 36" Monogram®
downdraft vent. See Downdraft Vents for details.
2" Min.
to Side Walls
1-3/4"
Min.
16" Min
• Install these cooktops with any exhaust hood of the
same or greater width; 300 CFM or greater air flow
rating is recommended.
E L E C T R I C C O O K TO P S
ZEU769SCSS
Black with stainless steel trim
ZEU769BCBB Black
ZEU769TCWW White
G AS C O O K TO P S
Advance Planning for Electric Cooktops
2-1/2"
Min.
to Front
Edge
*Depth at conduit location is 4-3/4".
Allow 5" minimum clearance below
the cooktop bottom to combustible
materials.
37
Advance Planning for Built-In Cooking Products
Monogram® built-in ovens and warming are designed for installation flexibility and to coordinate with and
complement other Monogram appliances. Single ovens can also be installed below approved Monogram
cooktops. Review the following chart for approved combinations.
Approved Single Oven and Cooktop Installation Combinations
Gas Cooktops
36" Stainless Steel ZGU375
36" Gas-on-Glass ZGU36
Electric Cooktops
30" Digital ZEU30R
36" Digital ZEU36R
36" Electric ZEU769
30" European
ZET1038
30" Professional
ZET1038P
30" Electronic
ZET938
27" Electronic
ZEK938
30" and 27"
Warming Drawer
ZTD/ZKD910
•
•
•
•
•
•
ZTD910
ZTD910
•
•
•
•
•
•
•
•
ZKD910
ZTD910
Note: The Built-In Wall Oven with Advantium® Speedcook Technology cannot be installed below a countertop.
38
monogram.com
ADVANTIUM ® SPEEDCOOK
WA L L OV E N
Wall Oven with Advantium ® Speedcook Technology
General Features
TU
SPEED
COOK
REPEAT LAST
MANUAL
COOK
POWER
LEVEL
TIMER
MICRO
WAVE
OPTIONS
HELP
MICRO
EXPRESS
R N T O SE
START
PAUSE
BACK
PR
R
Speedcook technology. 4500-watt halogen cooking system
uses heat generated from light to rapidly cook the outside
of foods, sealing in natural juices. At the same time, heat
penetrates the surface, cooking the inside.
CLEAR
OFF
E
ES S T O E N T
RECIPE
Remarkable performance. Oven-quality foods cook in an
average of one-fourth the time of a conventional oven,
with no preheating required.
Integrated styling.The overall look is sleek. The oven’s bold
horizontal lines are set off by simple graphics and a tubular
handle on the pull-down door.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
CONVECTION
WA L L OV E N S
Full-function microwave oven. At the touch of a button, the
oven converts to a high-performance, sensor-controlled
microwave.
Advantium
Speedcook Oven
ZSC2001FSS, ZSC2000FWW
and ZSC2000FBB
Overall Exterior Dimensions
(excluding handles)
(WxHxD in inches):
29-25/32 x 21-7/8 x 15-27/32
Amps @ 208/240V
30
Approx. Shipping Wt. (lbs.) 101
M I C R OWAV E OV E N S
Easy-to-use controls.Turn the selection dial to the recipe
you want, then press. Help and Demo programs guide
you through the simple process of choosing a programmed
recipe or customizing your own.
■ 30" Oven Cabinet Width
Required
■ Approved for Installation
Above a Single Wall Oven
or Warming Drawer
The Monogram Advantium built-in oven can be installed
directly into a wall or 30"-wide wall oven cabinetry.
Install it alone, with a single oven or with a warming
drawer. Create a complete cooking center by installing
the Advantium with both.
Cutout and Product Dimensions
Advantium Oven Installed Alone
Order a 30"-wide single oven cabinet or cut the opening
in a wall to the dimensions shown.
30"
• This oven must be installed at least 36-3/4" above
the floor.
19"
Min
28-1/2"
• For personal safety, this oven cannot be installed in a
cabinet arrangement such as an island or peninsula.
28-7/16"
15"
(Recessed
Portion)
21"
• This oven is not approved for installation below a
countertop, side by side or stacked.
21-7/8"
15-27/32"
Electrical Requirements
Product rating is 120/208 or 120/240V, 60Hz, 30 amps.This
product must be connected to a supply circuit of the
proper voltage and frequency and protected by a
time-delay fuse or circuit breaker.
WA R M I N G D R AW E R S
Advance Planning for Wall Oven with Advantium
Speedcook Technology
29-25/32"
36-3/4" Min.
Required
39
Advance Planning for Wall Oven with Advantium ®
Speedcook Technology
Advantium Oven Installed Above a Monogram® Single
Wall Oven
When installed over a single oven or a warming drawer,
allow at least 2" between the two openings. This
separation will provide clearance for bottom overlap of
the Advantium oven and top overlap of the single oven
or warming drawer.
• The Advantium oven and single oven combination can
use separate electrical junction boxes or a single junction
box connected to a 50-amp circuit.
30"
24"
Min.
28-1/2"
21"
Advantium Oven Installed Above a Monogram Single
Wall Oven and a Warming Drawer
An anti-tip block must be installed at the rear of the
warming drawer opening. See installation instructions for
complete details.
• The Advantium oven and single oven combination can
use separate electrical junction boxes or a single junction
box connected to a 50-amp circuit.
• The warming drawer must be supplied with a separate
120V, 60Hz, properly grounded receptacle.
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
30"
2" Min.
Per Oven
Requirement
21"
2" Min.
Per Oven
Requirement
2" Min.
*45-1/4"
*The middle rail separating the two openings may need to be larger
than the 2" min. shown.
Advantium Oven Installed Above a Monogram
Warming Drawer
An anti-tip block must be installed at the rear of the
warming drawer opening. Again, see installation
instructions for complete details.
• The warming drawer must be supplied with a
separate 120V, 60Hz, properly grounded receptacle.
30"
24"
Min.
28-1/2"
21"
9-1/4"
36-3/4"
Min.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2" Min.
Install 2 x 4
or 2 x 2
Runners or
Solid Bottom,
Must Support
100 lbs.
Note: Additional clearance between cutouts may be required.
40
24"
Min.
28-1/2"
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
45-1/4"
9-1/4"
Note: Additional clearance between cutouts may be required. Check
to be sure the oven supports above the warming drawer location do
not obstruct the required interior 23-1/2" depth and 9-1/4" height.
See each specific product installation instruction for details.
monogram.com
General Features
ADVANTIUM ® SPEEDCOOK
WA L L OV E N
Electronic Convection Wall Ovens
LOWER OVEN
(CONV)
UPPER OVEN
(CONV)
BAKE
(CONV)
BAKE
MULT
1 RACK
BAKE
BROIL
HIGH
LOW
ROAST
(CONV)
DELAY
START
COOK
TIME
START
WARM
PROOF
PROBE
SELF
CLEAN
CLEAR
OFF
HIGH
LOW
3
2
1
4
5
6
7
8
(CONV)
BAKE
START
BAKE
MULT
1 RACK
CLEAR
OFF
BAKE
BROIL
HIGH
LOW
ROAST
(CONV)
DELAY
START
COOK
TIME
WARM
PROOF
PROBE
SELF
CLEAN
LOWER OVEN
HIGH
LOW
HIGH
LOW
(CONV)
BAKE
LOCK
(CONV)
UPPER OVEN
TIMER
0
9
(CONV)
BAKE
MULT
1 RACK
BAKE
BROIL
HIGH
LOW
ROAST
(CONV)
DELAY
START
COOK
TIME
START
WARM
PROOF
PROBE
SELF
CLEAN
CLEAR
OFF
HIGH
LOW
2
1
3
4
5
6
7
(CONV)
BAKE
START
BAKE
MULT
1 RACK
CLEAR
OFF
BAKE
BROIL
HIGH
LOW
ROAST
(CONV)
DELAY
START
COOK
TIME
WARM
PROOF
PROBE
SELF
CLEAN
HIGH
LOW
TIMER
0
9
8
HIGH
LOW
LOCK
Electronic glass touch controls. A gentle touch allows you
to easily select the desired cooking function: convection
bake or roast, variable or closed-door broiling, 24-hour
delay bake, warm mode or proof mode.
Self-clean oven racks. An enameled porcelain finish makes
oven cleaning as simple as a quick wipe of a towel.
Halogen lighting.Two halogen lights illuminate your culinary
work in progress, putting it into bright, clear perspective.
Concealed bake element. A smooth surface simplifies ash
removal after the self-clean cycle.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
27" Double Oven
ZET958SFSS, ZET958WFWW
and ZET958BFBB
ZEK958SFSS, ZEK958WFWW
and ZEK958BFBB
Overall Dimensions
(WxHxD in inches):
29-3/4 x 52-7/8 x 23-1/4
Amps @ 240VAC
30
208VAC
26
Approx. Shipping Wt. (lbs.) 260
Overall Dimensions
(WxHxD in inches):
26-5/8 x 51 x 23-1/4
Amps @ 240VAC
29
208VAC
25
Approx. Shipping Wt. (lbs.) 164
■ Flush Appearance Installation
■ Fits Standard 30"-Wide
Wall Oven Cabinets
■ Approved for Installation
Over Warming Drawers
■ Flush Appearance Installation
■ Fits Standard 27"-Wide
Wall Oven Cabinets
■ Approved for Installation
Over Warming Drawers
M I C R OWAV E OV E N S
Spacious interior.The generous 4.1 cu. ft. oven cavity with
multiple rack positions accommodates several trays and
roasting pans.
30" Double Oven
OPTIONS
OVEN
DELAY
START
(CONV)
BAKE
(CONV)
BAKE
MULT
1 RACK
BAKE
BROIL
HIGH
LOW
(CONV)
ROAST
START
WARM
PROOF
CLEAR
OFF
OPTIONS
PROBE
OVEN
COOK
TIME
SELF
CLEAN
HIGH
LOW
DELAY
START
(CONV)
BAKE
1
2
3
4
5
6
7
8
0
9
(CONV)
BAKE
MULT
1 RACK
BAKE
BROIL
TIMER
HIGH
LOW
LOCK
HIGH
LOW
(CONV)
ROAST
START
WARM
PROOF
CLEAR
OFF
COOK
TIME
1
2
3
4
5
6
7
8
0
9
PROBE
SELF
CLEAN
HIGH
LOW
TIMER
HIGH
LOW
LOCK
30" Single Oven
27" Single Oven
ZET938SFSS, ZET938WFWW
and ZET938BFBB
ZEK938SFSS, ZEK938WFWW
and ZEK938BFBB
Overall Dimensions
(WxHxD in inches):
29-3/4 x 28-1/4 x 23-1/4
Amps @ 240VAC
15
208VAC
13
Approx. Shipping Wt. (lbs.) 135
Overall Dimensions
(WxHxD in inches):
26-5/8 x 29 x 23-1/4
Amps @ 240VAC
15
208VAC
13
Approx. Shipping Wt. (lbs.) 100
■ Flush Appearance Installation
■ Fits Standard 30"-Wide
Wall Oven Cabinets
■ Undercounter Installation
■ Approved for Installation
Under Specified Cooktops,
Under Advantium Ovens and
Over Warming Drawers
■ Flush Appearance Installation
■ Fits Standard 27"-Wide
Wall Oven Cabinets
■ Undercounter Installation
■ Approved for Installation
Under Specified Cooktops,
Under Advantium Ovens and
Over Warming Drawers
WA R M I N G D R AW E R S
Dual convection. Unique double-oven configuration allows
simultaneous convection cooking in both the upper and
lower cavities. Prepare a main course in one oven and up
to five racks of hors d’oeuvres in the other, with deliciously
consistent results.
CONVECTION
WA L L OV E N S
Reverse-air convection. A bi-directional fan delivers
exceptionally consistent cooking performance, allowing
heated air to circulate on all sides of food.
41
Advance Planning for Electronic Convection Wall Ovens
Electrical Requirements
Product rating is 120/208 or 120/240V, 60Hz. Connect to a
30-amp circuit for double ovens and 15-amp circuit for
single ovens. The ovens must be connected to a supply
circuit of the proper voltage and frequency and protected
by a time-delay fuse or circuit breaker.
Cutout and Product Dimensions
23-1/2"
10"
23-1/2"
Locate Electrical Outlet Within 10"
of Left Side of Opening and 44" Above
Cutout Floor or 5" Below Cutout Floor
Locate Junction Box 47"
Above Cutout Floor, Within 5"
of Right Rear Wall
51-13/16"
Min.
51-15/16"
Max.
12"
28-1/2" Min.
28-5/8" Max.
52-7/8"
23-1/2"
27-1/4" Min.
27-5/16" Max.
23-1/4"
Recessed
Depth
29-3/4"
28-1/4"
23-1/4"
Recessed
Depth
30"
30" Single Ovens
ZET938SFSS Stainless Steel
ZET938BFBB Black
ZET938WFWW White
25" Min.
25-1/4" Max.
51"
27"
27" Double Ovens
ZEK958SFSS Stainless Steel
ZEK958BFBB Black
ZEK958WFWW White
Locate Junction Box 22"
Above Cutout Floor, Within 5"
of Right Rear Wall
28-1/2" Min.
28-5/8" Max.
32-1/2"
42
13-1/4"
30"
30" Double Ovens
ZET958SFSS Stainless Steel
ZET958BFBB Black
ZET958WFWW White
49-11/16"
Min.
50-1/8"
Max.
10"
27-5/8" Min.
28-1/8" Max.
23-1/4"
Recessed
Depth
26-5/8"
23-1/2"
Locate Electrical Outlet Within 10"
of Left Side of Opening 22" Above
Cutout Floor or 5" Below Cutout Floor
25" Min.
25-1/4" Max.
29"
29-3/4"
23-1/4"
Recessed
Depth
32-1/2"
27"
27" Single Ovens
ZEK938SFSS Stainless Steel
ZEK938BFBB Black
ZEK938WFWW White
26-5/8"
monogram.com
ADVANTIUM ® SPEEDCOOK
WA L L OV E N
European Convection Wall Ovens
General Features
Sophisticated styling. With its large viewing window and
seamless appearance, this oven displays elegance on a
grand scale. Handmade control knobs punctuate the
overall design.
True European convection. A dedicated third heating
element in the back wall combines with the convection
fan to provide even heat and a consistent temperature
throughout the oven.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
30" Single Oven
ZET1058SFSS and ZET1058BFBB
ZET1038SFSS and ZET1038BFBB
Overall Dimensions
(WxHxD in inches):
29-1/4 x 48 x 22
Amps @ 240VAC
27.1
208VAC
26.9
Approx. Shipping Wt. (lbs.) 300
Overall Dimensions
(WxHxD in inches):
29-1/4 x 23-1/4 x 22
Amps @ 240VAC
13.8
208VAC
13.5
Approx. Shipping Wt. (lbs.) 140
■ Flush Appearance Installation
■ Fits Standard 30"-Wide Wall
Oven Cabinets
■ Approved for Installation
Over Warming Drawers
■ Flush Appearance Installation
■ Fits Standard 30"-Wide Wall
Oven Cabinets
■ Undercounter Installation
■ Under Cooktop Installation
(except model ZEU769)
■ Approved for Installation
Under Advantium Ovens and
Over Warming Drawers
M I C R OWAV E OV E N S
Concealed bake element. A smooth surface simplifies ash
removal after the self-clean cycle.
30" Double Oven
WA R M I N G D R AW E R S
Halogen lighting.Two halogen lights illuminate your culinary
work in progress, putting it into bright, clear prospective.
CONVECTION
WA L L OV E N S
Self-clean oven racks. An enameled porcelain finish makes
oven cleaning as simple as a quick wipe of a towel.
43
Advance Planning for European Convection Wall Ovens
The European oven offers contemporary styling with the
signature Monogram® tubular handles. The European
oven is designed to fit into a 30"-wide cabinet.
Cutout and Product Dimensions
23-1/2"
30"
28" Min.
28-3/8" Max.
Locate Junction Box Above
or Below Cutout or Through
Cabinet Sides
Electrical Requirements
Product rating is 120/208 or 120/240V, 60Hz. Connect to a
30-amp circuit for double ovens and 15-amp circuit for
single ovens. The ovens must be connected to a supply
circuit of the proper voltage and frequency and protected
by a time-delay fuse or circuit breaker.
Note: These ovens are pre-wired for 240V. Modifications must be
made for 208V operation. See installation instructions for details.
Installation Below a Countertop
A single oven can be installed beneath countertops and
below approved cooktops. Always refer to the cooktop
installation instructions for electrical
requirements and clearances.
21-1/4"
47-5/8"
48"
12"
22"
29-1/4"
ZET1058SFSS Stainless steel
ZET1058BFBB Black
1-1/2" Cabinet Top
25"
36"
Countertop
Height
Oven
Junction
Box
28" Min.
28-3/8" Max.
Locate junction box
above or below
cutout or through
cabinet sides.
23-1/2"
28" min.
28-3/8" max.
23" Max.
21-1/4"
23"
23-1/4"
23-1/2" Min.
Elevate the oven floor to desired height.
The support must be level, rigidly mounted
and capable of supporting 250 lbs.
22"
34"
30"
ZET1038SFSS Stainless steel
ZET1038BFBB Black
44
29-1/4"
monogram.com
MICROWAVE
SELECTIONS
CONVECTION
SENSOR
POPCORN
SENSOR
REHEAT
AUTO
DEFROST
MICRO
COOK
COMBINATION
SENSOR
BEVERAGE
SENSOR
COOK
TIME
DEFROST
TEMP
COMBINATION
COOK/HOLD
ROAST
PROBE
PROBE
COOK
ADVANTIUM ® SPEEDCOOK
WA L L OV E N
Microwave Ovens
1
2
3
4
5
EXPRESS
COOK
EXPRESS
COOK
EXPRESS
COOK
EXPRESS
COOK
EXPRESS
COOK
6
7
8
9
POWER
LEVEL
DELAY
START
ADD
30 SEC
MINUTE
START
REMINDER
COOK
0
DISPLAY
ON/OFF
CLEAR
OFF
LEVEL
KITCHEN
TIMER
CODES 0-1-2-3
SENSOR COOKING
BEVERAGE
REHEAT
BEVERAGE
POPCORN
POTATO
CHICKEN
FISH
TIME
COOK
AUTO
DEFROST
1
EXPRESS
COOK
4
2
EXPRESS
COOK
5
EXPRESS
COOK
EXPRESS
COOK
7
8
POWER
LEVEL
0
TIME
DEFROST
3
EXPRESS
COOK
6
EXPRESS
COOK
SENSOR COOKING
9
POPCORN
ADD
30 SEC
BEVERAGE
REHEAT
POTATO
VEGETABLE
DISPLAY ON/OFF
HELP
CLOCK
CHICKEN
FISH
START
PAUSE
CLEAR
OFF
GUIDE BEHIND DOOR
BEEPER
VOLUME
DELAY
START
AM/PM
REMINDER
SCROLL SPEED
DEFROST
AUTO/TIME
TIME COOK
1
EXPRESS
COOK
TIMER
4
ON/OFF
EXPRESS
COOK
7
POWER
LEVEL
2
EXPRESS
COOK
5
EXPRESS
COOK
3
START
EXPRESS
COOK
PAUSE
6
EXPRESS
COOK
8
HELP
9
CLEAR
OFF
ADD
30 SEC
0
DISPLAY ON/OFF
TIMER
ON/OFF
CLOCK
REMINDER
DELAY
START
AM/PM
TURNTABLE
Microwave/
Convection Oven
Countertop
Microwave Oven
Compact
Microwave Oven
ZMC1095SFSS, ZMC1095WFWW
and ZMC1095BFBB
ZE2160SF
ZEM200SF, ZEM200WF
and ZEM200BF
Oven Cavity (cu. ft.)
1.0
Power Rating
800W
Overall Dimensions*
(WxHxD in inches):
26-3/4 x 18-5/8 x 16-3/8
Amps @ 120VAC
13.0
Approx. Shipping Wt. (lbs.) 84
Oven Cavity (cu. ft.)
2.1
Power Rating
1200W
Overall Dimensions
(WxHxD in inches):
23-21/32 x 13-5/16 x 19-1/2
Amps @ 120VAC
13.0
Approx. Shipping Wt. (lbs.) 51
Oven Cavity (cu. ft.)
1.0
Power Rating
800W
Overall Dimensions*
(WxHxD in inches):
23-25/32 x 11-3/16 x 12-9/32
Amps @ 120VAC
12.5
Approx. Shipping Wt. (lbs.) 46
■ Can Be Installed In a 27" or
30" Wall Oven Cabinet, No
Kit Required
■ Can Be Installed Over a 27"
or 30" Wall Oven
■ Built-In Kit Available for 27"
and 30" Installation
■ Built-In Kit Available for 27"
Installation
CONVECTION
WA L L OV E N S
Sensor Microwave Oven
M I C R OWAV E OV E N S
*Height includes feet
Built-In Microwave/Convection Oven
General Features
Countertop Microwave Oven
General Features
Three modes.The microwave/convection oven offers three
ways to cook: microwave, convection, or a combination
of both.
Sensor cooking. An electronic sensor monitors the level of
steam released by food and automatically adjusts cooking
time to deliver optimal results.
Microwave/convection cooking.The convection mode uses
a separate heating element and fan built into the rear wall
to circulate air. This process allows gorgeous browning and
roasting. You can also convection-cook with the microwave
function for faster results, or use the oven for
microwaving only.
Sensor cooking. An electronic sensor monitors the level of
steam released by food and automatically adjusts cooking
time to deliver optimal results.
WA R M I N G D R AW E R S
*Depth excludes handle
Compact Microwave Oven
General Features
Sensor cooking. An electronic sensor monitors the level of
steam released by food and automatically adjusts cooking
time to deliver optimal results.
Installation flexibility.The compact oven can be built in,
mounted under a cabinet or placed on a countertop in just
about any location, whether it’s a small kitchen alcove or
guesthouse.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
45
Advance Planning for Microwave Ovens
Built-In Microwave/Convection Ovens
Compact Microwave Oven
The Monogram built-in microwave/convection oven
is sized to fit a 27"-wide cabinet. Side trim pieces are
supplied for installation in a 30" cabinet.
This microwave oven can be used on a countertop or
hung from kitchen wall cabinets. The hanging kit is
packed with the microwave oven.
• This microwave oven must be supplied with 120V, 60Hz,
and connected to an individual, properly grounded
branch circuit and protected by a 15- or 20-amp circuit
breaker or time-delay fuse.
• This microwave oven can also be built into 27"-wide
cabinetry. Order JX827SS for stainless steel, JX827BN for
black and JX827WN for white models.
®
6"
Locate electrical outlet on
back wall 17" min. outside
and 19" min. inside cutout.
18"
16-3/8"
Excluding
Handle
25-1/4"
8"
Locate Outlet Box in
the Shaded Area
17-1/2"
18-5/8"
36" Min.
18"
Locate Electrical
Outlet on Back
Wall 16" Min.
Outside
and 18" Min.
Inside Cutout
24-7/8"±1/16"
12-1/2"
16-1/4"
15"±1/16"
26-3/4"
27" or 30"
Cabinet
• This microwave oven must be supplied with 120V, 60Hz,
and connected to an individual, properly grounded
branch circuit and protected by a 15- or 20-amp circuit
breaker or time-delay fuse.
26-1/8"
18-5/8"
ZMC1095SFSS Stainless steel
ZMC1095BFBB Black
ZMC1095WFWW White
ZEM200SF Stainless steel
ZEM200BF Black
ZEM200WF White
29-3/4"
with side trim
Countertop Microwave Oven
This large microwave oven is encased in stainless steel. It
can be used on the countertop or built in using optional
kits. Order JX2127SH for installation into a 27"-wide
cabinet. Order JX2130SH for installation into a 30"
cabinet. Kits must be ordered separately from your
Monogram dealer.
• This microwave oven must be supplied with 120V, 60Hz,
and connected to an individual, properly grounded
branch circuit and protected by a 15- or 20-amp circuit
breaker or time-delay fuse.
Locate Electrical
Outlet on Back
Wall 19-1/2" Min.
Outside and 22" Min.
Inside Cutout
25-1/2"
19"
19"
16-3/4"
B
ZE2160SF
A
A
B
JX2127SH
27"
26-5/8"
JX2130SH
30"
29-3/4"
Note: The trim frame protrudes forward of cabinetry to allow air flow
from the top, bottom and sides of the frame. Allow 1" clearance
beyond the edge of the trim frame to provide proper air flow.
46
27"
monogram.com
ADVANTIUM ® SPEEDCOOK
WA L L OV E N
Warming Drawers
General Features
Temperature settings. Monogram warming drawers offer
a range of temperature options, from a proof setting
(approximately 75°F) to a high setting (approximately
230°F).
Accessibility. A full-extension drawer allows complete
access, and it is removable for easy cleanup.
Installation versatility. All 30" and 27" warming drawers
are UL listed for use with Monogram wall ovens and
cooktops.
Three-pan set. A set of three covered pans allows a choice
of sizes for any dish: one 6-quart pan and two 3-quart pans.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
30" Warming
Drawer
27" Warming
Drawer
ZTD910SFSS, ZTD910WFWW
and ZTD910BFBB
ZKD910SFSS, ZKD910WFWW
and ZKD910BFBB
Overall Dimensions
(WxHxD in inches):
30 x 10-1/2 x 23-1/4
Amps @ 120VAC
Approx. Shipping Wt. (lbs.)
15
65
Overall Exterior Dimensions
(WxHxD in inches):
26-3/4 x 10-1/2 x 23-1/4
Amps @ 120VAC
15
Approx. Shipping Wt. (lbs.) 59
■ Optional Custom Wood
Panel Kit
■ Side-by-Side Installation
■ Undercounter Installation
■ Under Wall Oven Installation
■ Under Cooktop Installation
■ Optional Custom Wood
Panel Kit
■ Side-by-Side Installation
■ Undercounter Installation
■ Under Wall Oven Installation
■ Under Cooktop Installation
M I C R OWAV E OV E N S
Practical details.The design of the half rack not only
distributes heat evenly, but it also provides fifty percent
more surface area for stacking plates and food.
CONVECTION
WA L L OV E N S
Humidity control. By opening or closing the warming
drawer vent, you can keep foods crisp or maintain
moisture.
Electrical Requirements
Custom Panels and Handles
Product rating is 120V, 60Hz, and connected to an
individual, properly grounded branch circuit and protected
by a 15- or 20-amp circuit breaker or time-delay fuse.
Two warming drawers installed side by side can operate
from the same duplex outlet.
The drawer fronts can be removed and replaced with a
custom panel to match surrounding cabinetry.
WA R M I N G D R AW E R S
Advance Planning for Warming Drawers
• Order ZXD27B for 27"-wide models and ZXD30B for
30" models. These kits must be ordered separately
from your Monogram supplier.
• The tubular handle may be reinstalled onto the custom
panel (longer screws will be required) or replaced with
a custom handle of your choice.
26-3/4" for 27" Models
30" for 30" Models
Drill 5/16" Dia.
10-1/2" Through Custom
Panel For Lamp Jewel
1-13/16"
1-3/4"
47
Advance Planning for Warming Drawers
Installation Below a Single or Double Oven
The warming drawer may be installed below a single or
double oven. Observe the 1" minimum clearance above
the toekick, or 5" above the floor.
30" Warming Drawers
ZTD910SFSS Stainless Steel
ZTD910BFBB Black
ZTD910WFWW White
23-1/2" Min.
Inside
Single
Oven
2x2 or 2x4
Anti-Tip Block
Against Rear
Wall, 9" From
Floor to
Bottom of
Block
27" Warming Drawers
ZKD910SFSS Stainless Steel
ZKD910BFBB Black
ZKD910WFWW White
Oven
Cutout
Allow 5/8"
Overlap on
All Sides
9-1/4"
2"
Min.
Side-by-Side Installation
Installation Below a Countertop
The warming drawer may be installed beneath a
countertop. Install the drawer 5" minimum above the
floor or 1" above the toekick. The recommended distance
from the floor to the bottom of the cutout is 23-1/4" for
undercounter installation.
Installation Below a Cooktop
The warming drawer is approved for installation below
specified cooktop models. A solid barrier and an air gap
between the cooktop and the warming drawer are
required. See note below.
2" Min.
9"
Side-by-Side Installation
Install two warming drawers in separate cutouts. Allow
2" minimum between cutouts.
23-1/4"
10-1/2"
Installation Below A Cabinet Drawer
The warming drawer may be installed beneath a cabinet
drawer. In this installation, a solid barrier should be
installed above the warming drawer to block access. Use
any solid material such as 1/4"-thick plywood. Allow at
least 1/4" air gap between the barrier and the top of the
warming drawer.
A
1" Min. Above Toekick or Adjust
to Oven Installation Height
ZTD910
ZKD910
Dim. A
28-1/2"
25-1/2"
B
Dim. B
30"
26-3/4"
Note: Additional clearance between cutouts may be required. Check to
be sure that oven supports, above the Warming Drawer location, do not
obstruct the required interior 23-1/2" depth and 9-1/4" height.
Electrical
Outlet 16" Max.
From Left Side.
23-1/2" Min.
Inside
Double
Oven
Install
2x4 or 2x2
Anti-Tip Block
Against Rear
Cabinet Wall
9" From Floor
to Bottom
of Block
Electrical Outlet
42" Max. From
Right Side. 1-1/2"
Cabinet
Top
25"
Solid Barrier
See Note
Electrical Outlet
Flush With
Side of Cabinet
7" Max.
7"
1" Min.*
9"
2x2 or 2x4
Anti-Tip Block
Against Rear
Wall, 9" From
Floor to
Bottom of
Block
A
Allow 5/8"
Overlap on
All Sides
Oven
Cutout
9-1/4"
36"
Countertop
Height
Solid Barrier
low
2" Min.
23-1/2" Min.
23-1/4"
Install a Solid Barrier
and a 1/4" Air Gap
Above Warming Drawer
9"
9-1/4"
1/4"
Air Gap
Be
on
atiawer
l
l
ta r
Ins a D
10-1/2"
A
1" Min. Above Toekick
ZTD910
ZKD910
48
Dim. A
28-1/2"
25-1/2"
B
Dim. B
30"
26-3/4"
ZTD910
ZKD910
Dim. A
28-1/2"
25-1/2"
Dim. B
30"
26-3/4"
*Note: When installing the warming drawer below a cooktop, a solid
barrier must be installed at least 1" from the lowest point of the bottom
of the cooktop burner box to the top of the cutout. Use any solid material
such as 1/4"-thick plywood. Allow at least 1/4" air gap between the
barrier and the top of the warming drawer.
monogram.com
48" PROFESSIONAL
RANGES
48" Dual-Fuel Professional Ranges
General Cooktop Features
Gas burners. Dual-ring burners with porcelainized burner
grates ensure even heat delivery, and infinite controls
maintain precise temperature settings between 500 and
15,000 BTUs.
REAR
OVEN
LIGHT
FRONT
OVEN
ON
HEATING
DOOR
LOCKED
REAR
FRONT
HEATING
REAR
HEATING
ram
Monog
FRONT
HEATING
OVEN
LIGHT
18,000-BTU grill.The stainless steel grill grate is reversible,
with a smooth surface for delicate foods and a ridged side
for hearty meats, and it slopes forward to allow liquids to
flow away from food, into the slide-out drip trays.
Main oven (4.3 cu. ft., 27" wide)/Companion oven
(2.0 cu. ft., 12" wide). Each model comes with a large
electric-convection oven and a small thermal oven. The
large oven offers an 8-pass, 4000-watt broil element and a
10-pass, 5000-watt bake element. The small thermal oven
is equipped with a 6-pass, 3600-watt broil element and a
4-pass, 2800-watt bake element.
Self-cleaning.The large electric oven cleans itself, at the
touch of a button. The door locks automatically and
remains locked throughout the five-hour cleaning process.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
36" PROFESSIONAL
RANGES
General Oven Features
48" Professional
Range
ZDP48N4GDSS, ZDP48N6RDSS
and ZDP48N6DDSS (natural gas)
ZDP48L4GDSS, ZDP48L6RDSS
and ZDP48L6DDSS (liquid
propane)
Overall Dimensions
(WxHxD in inches):
47-7/8 x 35-1/4– 36 -3/4 x 28-1/4
Amps @ 240VAC
48.3
Approx. Shipping
Wt. (lbs.)
602/595/600
30" PROFESSIONAL
RANGES
18,000-BTU griddle.The 3/8"-thick, stainless steel griddle is
also sloped to offer a clean cooking surface. Thermostatic
control ensures even heating and consistent results.
■ Dual-Fuel Range Offers a
Combination of Burners, Grill
and Griddle on Cooktop
■ Natural or LP Gas Must Be
Specified by Model Number
■ A 1-1/2", 12" or 22" Backguard
Must Be Ordered with Range
■ Optional Wok Accessory
• All Professional ranges are factory set for natural or
liquid propane gas. The correct model should be
ordered for the installation situation.
Note: Conversion kits (WB49X10082, Natural to LP and
WB49X10081, LP to Natural) are available if the wrong gas
type was ordered. The kits must be installed by a qualified
service technician at additional cost.
Electrical Requirements
Ranges must be supplied with 208/240V, 60Hz, and connected
to an individual, properly grounded branch circuit protected
by a circuit breaker or time-delay fuse. Install a 50-amp circuit
for 48" ranges. The receptacle must be a NEMA 14-50R
device to accept the four-prong plug on the range.
Locate gas and
electrical as shown.
8"
8"
4"
12"
• Accessory ZXWK22Y, 22" wok with lid and ring fits all
Professional ranges and cooktops.
16"
3-1/4"
Gas
Supply
36" PROFESSIONAL
C O O K TO P S
Professional ranges offer a number of choices in size
and cooktop configurations.
48" PROFESSIONAL
C O O K TO P S
Advance Planning for 48" Professional Ranges
3-1/2"
Electric
Supply
48"
Gas Supply
• Natural gas models are designed to operate at 5" water
column pressure. A regulator is required at the natural
gas source to provide maximum of 7" water pressure to
the range regulator.
• The liquid propane models are designed to operate at 10"
water column pressure. A regulator is required at the LP
source to provide maximum of 14" water pressure to the
range regulator.
49
Advance Planning for 48" Professional Ranges
48" Range Cooktop Configurations
Required Backguards
The 48" Professional dual-fuel ranges are available with
a combination of grill, griddle and burners on top, a
large 27" convection oven and smaller thermal
companion oven.
A backguard must be ordered and installed with these
ranges (at extra cost). Choose a 22"- or 12"-high backguard
for perimeter installations. Use the 1-1/2" backguard for
island installations or against a non-combustible surface
such as tile or brick.
ZDP48N4GDSS
with 4 burners,
grill and griddle
(Order ZDP48L4GDSS
for LP gas)
Backguards: Order one with a 48"-wide range:
ZX1B48WSS, 1-1/2" island backguard
ZX12B48WSS, 12" backguard
ZX22B48ASS, 22" backguard with warming shelf
Backguard with Warming Shelf
All Monogram® Professional Hoods feature infrared
warming lights. The 22"-high backguard with warming
shelf is a perfect complement when installed with the
tapered or straight-sided hoods.
ZDP48N6RDSS
with 6 burners and grill
(Order ZDP48L6RDSS
for LP gas)
• If you choose to install this range with a Restaurant
Style Professional Hood, use the 1-1/2" island backguard.
These hoods are shipped with a stainless steel backguard
and warming shelf.
ZDP48N6DDSS
with 6 burners
and griddle
(Order ZDP48L6DDSS
for LP gas)
Side View with Required Backguards
3-1/4"
21-1/4"
12"
12"
29-1/16"
High
Shelf
Low Back
• Install the hood 30" to 36" above the cooking surface.
Availables
Backguard
21-1/4"
12"
1-1/2"
35-1/4"-36-3/4"
28-1/4"
47-7/8"
Clearances between range and side wall or combustible material must
be at least 12" on each side.
Note: Depth including handle is 31-1/2".
50
12" Min. to Combustibles
Without Backguard or 0"
to Non-Combustible Wall
with 1-1/2" Backguard
36" Min.
to
Combustibles
1-1/2"
Product Dimensions and Clearances
A 48"-wide professional vent hood with a minimum
1200 CFM is recommended for installation over
this range.
36" Min.
to
Combustibles
Backguard
0" Clearance
0" Clearance
26"
28-1/4"
31-1/2"
45-5/8"
monogram.com
48" PROFESSIONAL
RANGES
36" Dual-Fuel Professional Ranges
General Cooktop Features
Gas burners. Dual-ring burners ensure even heat delivery,
and infinite controls maintain precise temperature settings
between 500 and 15,000 BTUs.
REAR
OVEN
LIGHT
FRONT
OVEN
FRONT
OVEN
ON
HEATING
DOOR
LOCKED
REAR
ram
Monog
FRONT
HEATING
18,000-BTU grill.The stainless steel grill grate is reversible,
with a smooth surface for delicate foods and a ridged side
for hearty meats, and it slopes forward to allow drippings
to flow away from food into slide-out drip trays.
General Oven Features
ZDP36N4DDSS, ZDP36N4RDSS
and ZDP36N6DSS (natural gas)
36" main oven (4.3 cu. ft., 27" wide). Offers an 8-pass,
4000-watt broil element and a 10-pass, 5000-watt
bake element.
ZDP36L4DDSS, ZDP36L4RDSS
and ZDP36L6DSS (liquid
propane)
Self-cleaning. Press a button and turn the dial to set the
self-clean cycle. The door locks automatically and remains
locked throughout the five-hour cleaning process.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
36" PROFESSIONAL
RANGES
36" Professional
Range
Overall Dimensions
(WxHxD in inches):
35-7/8 x 35-1/4– 36 -3/4 x 28-1/4
Amps @ 240VAC
29.2
Approx. Shipping Wt. (lbs.) 415
30" PROFESSIONAL
RANGES
18,000-BTU griddle.The 3/8"-thick, stainless steel griddle is
also sloped to offer a clean cooking surface. Thermostatic
control ensures even heating and consistent results.
■ Dual-Fuel Range Offers a
Combination of Burners, Grill
and Griddle on Cooktop
■ Natural or LP Gas Must Be
Specified by Model Number
■ A 1-1/2", 12" or 22" Backguard
Must Be Ordered with Range
■ Optional Wok Accessory
• All Professional ranges are factory set for natural or
liquid propane gas. The correct model should be
ordered for the installation situation.
Note: Conversion kits (WB49X10082, Natural to LP and
WB49X10081, LP to Natural) are available if the wrong gas
type was ordered. The kits must be installed by a qualified
service technician at additional cost.
Electrical Requirements
Ranges must be supplied with 208/240V, 60Hz, and connected
to an individual, properly grounded branch circuit protected
by a circuit breaker or time-delay fuse. Install a 30-amp circuit
for 36" ranges. The receptacle must be a NEMA 14-50R
device to accept the four-prong plug on the range.
Locate gas and
electrical as shown.
12"
• Accessory ZXWK22Y, 22" wok with lid and ring fits all
Professional ranges and cooktops.
4"
4"
4"
12"
3-1/4"
Gas
Supply Electric
Supply
36"
3-1/2"
36" PROFESSIONAL
C O O K TO P S
All Professional ranges offer a number of choices in size
and cooktop configurations.
48" PROFESSIONAL
C O O K TO P S
Advance Planning for 36" Professional Ranges
Gas Supply
• Natural gas models are designed to operate at 5" water
column pressure. A regulator is required at the natural
gas source to provide maximum of 7" water pressure to
the range regulator.
• The liquid propane models are designed to operate at 10"
water column pressure. A regulator is required at the LP
source to provide maximum of 14" water pressure to the
range regulator.
51
Advance Planning for 36" Professional Ranges
36" Range Cooktop Configurations
Required Backguards
The 36" Professional dual-fuel ranges offer a combination
of grill, griddle and burners on top, and a large 27"
convection oven.
A backguard must be ordered and installed with these
ranges (at extra cost). Choose a 22"- or 12"-high backguard
for perimeter installations. Use the 1-1/2" backguard for
island installations or against a non-combustible surface
such as tile or brick.
ZDP36N4DDSS
with 4 burners and griddle
(Order ZDP36L4DDSS for LP gas)
Backguards: Order one with a 36"-wide range:
ZX1B36WSS, 1-1/2" island backguard
ZX12B36WSS, 12" backguard
ZX22B36ASS, 22" backguard with warming shelf
Backguard with Warming Shelf
All Monogram® Professional Hoods feature infrared
warming lights. The 22"-high backguard with warming
shelf is a perfect complement when installed with the
tapered or straight-sided hoods.
ZDP36N4RDSS
with 4 burners and grill
(Order ZDP36L4RDSS for LP gas)
• If you choose to install this range with a Restaurant
Style Professional Hood, use the 1-1/2" island backguard.
These hoods are shipped with a stainless steel backguard
and warming shelf.
ZDP36N6DSS
with 6 burners
(Order ZDP36L6DSS for LP gas)
Side View with Required Backguards
3-1/4"
21-1/4"
12"
Product Dimensions and Clearances
A 36"-wide professional vent hood with a minimum
600 CFM is recommended for installation over this range.
12"
29-1/16"
High
Shelf
Low Back
1-1/2"
21-1/4"
12"
1-1/2"
35-1/4"-36-3/4"
28-1/4"
35-7/8"
Clearances between range and side wall or combustible material must
be at least 12" on each side.
Note: Depth including handle is 31-1/2".
52
Backguard
0" Clearance
• Install the hood 30" to 36" above the cooking surface.
Availables
Backguard
36" Min.
to
Combustibles
12" Min. to Combustibles
Without Backguard or 0"
to Non-Combustible Wall
with 1-1/2" Backguard
36" Min.
to
Combustibles
0" Clearance
26"
28-1/4"
31-1/2"
45-5/8"
monogram.com
48" PROFESSIONAL
RANGES
30" Dual-Fuel Professional Ranges
General Cooktop Features
Gas burners. Dual-ring burners ensure even heat delivery,
and infinite controls maintain precise temperature settings
between 500 and 15,000 BTUs.
General Oven Features
Self-cleaning. Press a button and turn the dial to set the
self-clean cycle. The door locks automatically and remains
locked throughout the five-hour cleaning process.
36" PROFESSIONAL
RANGES
30" main oven (4.0 cu. ft., 24" wide). Offers an 8-pass,
4000-watt broil element and a 6-pass, 3700-watt
bake element.
30" Professional
Range
ZDP30N4DSS (natural gas)
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
ZDP30L4DSS (liquid propane)
Overall Dimensions
(WxHxD in inches):
29-7/8 x 35-1/4– 36 -3/4 x 26-3/4
Amps @ 240VAC
19.9
Approx. Shipping Wt. (lbs.) 396
30" PROFESSIONAL
RANGES
■ Dual-Fuel Range Offers a
Gas Cooktop and an
Electric Oven
■ Natural or LP Gas Must Be
Specified by Model Number
■ A 1-1/2", 9" or 22" Backguard
Must Be Ordered with Range
■ Optional Wok Accessory
Advance Planning for 30" Professional Ranges
• Accessory ZXWK22Y, 22" wok with lid and ring fits all
Professional ranges and cooktops.
Ranges must be supplied with 208/240V, 60Hz, and connected
to an individual, properly grounded branch circuit protected
by a circuit breaker or time-delay fuse. Install a 25-amp circuit
for 30" ranges. The receptacle must be a NEMA 14-50R
device to accept the four-prong plug on the range.
48" PROFESSIONAL
C O O K TO P S
Note: Conversion kits (WB49X10082, Natural to LP and
WB49X10081, LP to Natural) are available if the wrong gas
type was ordered. The kits must be installed by a qualified
service technician at additional cost.
Electrical Requirements
Locate gas and
electrical as shown.
12"
12"
3-1/4"
Gas
Supply Electric
Supply
30"
3-1/2"
36" PROFESSIONAL
C O O K TO P S
All Professional ranges are factory set for natural or
liquid propane gas. The correct model should be ordered
for the installation situation.
Gas Supply
• Natural gas models are designed to operate at 5" water
column pressure. A regulator is required at the natural
gas source to provide maximum of 7" water pressure to
the range regulator.
• The liquid propane models are designed to operate at 10"
water column pressure. A regulator is required at the LP
source to provide maximum of 14" water pressure to the
range regulator.
53
Advance Planning for 30" Professional Ranges
Product Dimensions and Clearances
Required Backguards
A 30"-wide professional vent hood with a minimum
600 CFM is recommended for installation over this range.
A backguard must be ordered and installed with these
ranges (at extra cost). Use a 22"- or 9"-high backguard
for perimeter installations; use the 1-1/2" for island
installation or against a non-combustible surface such
as tile or brick.
• Install the hood 30" to 36" above the cooking surface.
Availables
Backguard
21-1/4"
9"
1-1/2"
35-1/4"-36-3/4"
26-3/4"
29-7/8"
Clearances between range and side wall or combustible material must
be at least 12" on each side.
Backguards: Order one with a 30"-wide range:
ZX1B30YSS, 1-1/2" island backguard
ZX12B30YSS, 9" backguard
ZX22B30ASS, 22" backguard with warming shelf
Backguard with Warming Shelf
All Monogram® Professional Hoods feature infrared
warming lights. The 22"-high backguard with warming
shelf is a perfect complement when installed with the
tapered or straight-sided hoods.
• If you choose to install this range with a Restaurant
Style Professional Hood, use the 1-1/2" island backguard.
These hoods are shipped with a stainless steel backguard
and warming shelf.
Note: Depth including handle is 29-1/4".
Side View with Required Backguards
3-1/4"
21-1/4"
9"
12"
27-3/8"
High
Shelf
Low Back
36" Min.
to Combustibles
12" Min. to Combustibles
Without Backguard or 0"
to Non-Combustible Wall
with 1-1/2" Backguard
36" Min.
to
Combustibles
1-1/2"
Backguard
0" Clearance
0" Clearance
26-3/4"
29-1/4"
43-7/8"
54
monogram.com
48" PROFESSIONAL
RANGES
48" Professional Cooktops
General Features
18,000-BTU grill.The stainless steel grill grate is reversible,
with a smooth surface for delicate foods and a ridged side
for hearty meats, and it slopes forward to allow liquids to
flow away from food.
18,000-BTU griddle.The 3/8"-thick, stainless steel griddle is
also sloped to offer a clean cooking surface. Thermostatic
control ensures even heating and consistent results.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
HEATING
REAR
FRONT
HEATING
REAR
ram
Monog
FRONT
48" Professional
Cooktop
ZGU48N4GDSS, ZGU48N6RDSS
and ZGU48N6DDSS (natural gas)
ZGU48L4GDSS, ZGU48L6RDSS
and ZGU48L6DDSS (liquid
propane)
36" PROFESSIONAL
RANGES
Gas burners. Dual-ring burners with porcelainized burner
grates ensure even heat delivery, and infinite controls
maintain precise temperature settings between 500 and
15,000 BTUs.
Overall Dimensions
(WxHxD in inches):
47-7/8 x 8-7/16 x 26-5/8
Amps @ 120VAC 6.6– 4 burner
3.3– 6 burner
Approx. Shipping Wt. (lbs.) 324
30" PROFESSIONAL
RANGES
■ Offers Three Combinations
of Burners, Grill and Griddle
■ Natural or LP Gas Must Be
Specified by Model Number
■ A 1/2", 12" or 22" Backguard
Must Be Ordered with Range
■ Optional Wok Accessory
Advance Planning for 48" Professional Cooktops
Note: Conversion kits (WB49X10082, Nat. to LP and
WB49X10081, LP to Nat.) are available if the wrong gas type
was ordered. The kits must be installed by a qualified
service technician at additional cost.
• Accessory ZXWK22Y, 22" wok with lid and ring fits all
Professional ranges and cooktops
Cooktops must be supplied with 120V, 60Hz, and connected
to an individual, properly grounded branch circuit protected
by a 15 amp circuit breaker or time-delay fuse.
2"
Locate gas
inlet on
back wall
or on floor
2" from
back wall
48" PROFESSIONAL
C O O K TO P S
• All Professional cooktops are factory set for natural or
liquid propane gas. The correct model should be
ordered for the installation situation.
Electrical Requirements
17"
16"
Gas Supply
• Natural gas models are designed to operate at 5" water
column pressure. A regulator is required at the natural
gas source to provide maximum of 7" water pressure to
the cooktop regulator.
36" PROFESSIONAL
C O O K TO P S
Professional cooktops offer a number of choices in size
and cooktop configurations.
• The liquid propane models are designed to operate at 10"
water column pressure. A regulator is required at the LP
source to provide maximum of 14" water pressure to the
cooktop regulator.
55
Advance Planning for 48" Professional Cooktops
48" Cooktop Surface Configurations
Installation Options
The 48" Monogram Professional Cooktops are available
with a combination of grill, griddle or burners to suit
your needs.
• The cooktop stainless surface will be 1/2" higher than
adjacent countertops.
®
ZGU48N4GDSS
with 4 burners,
grill and griddle
(Order ZGU48L4GDSS
for LP gas)
• In 24"-deep cabinets, the front of the cooktop will be
approximately 1-7/8" beyond the front of the countertop.
Cooktop
26-5/8"
21-1/4"
High
Back
12"
Countertop
Level
8-7/16"
1/2"
Flush With
Cabinet Front
Front Flush With
Cabinets - a Minimum
of 25-3/4" Cabinet
Depth Required
Low Back
Cooktop
3" to Center
Line of Gas Inlet
1/2"
ZGU48N6RDSS
with 6 burners and grill
(Order ZGU48L6RDSS
for LP gas)
22-3/4"
23-1/4"
2-1/2"
Cabinet Face - Projecting Control Panel
Front Projects
Outward as Shown
From Standard
Depth Cabinets.
Cabinet Face - Flush Control Panel
Required Backguards
ZGU48N6DDSS
with 6 burners
and griddle
(Order ZGU48L6DDSS
for LP gas)
A backguard must be ordered and installed with these
cooktops (at extra cost). Choose a 22"- or 12"-high
backguard for perimeter installations. Use the 1/2" trim
for island installation or against a non-combustible
surface such as tile or brick.
Product Dimensions and Clearances
Backguards: Order one with a 48"-wide cooktop:
ZXC1B48BSS, 1/2" island trim
ZXC12B48WSS, 12" backguard
ZXC22B48ASS, 22" backguard with warming shelf
A 48"-wide professional vent hood with a minimum
1200 CFM is recommended for installation over this
cooktop.
• Install the hood 30" to 36" above the cooking surface.
le
Availab rds
Backgua
47-7/8"
21-1/4"
Clearances between
cooktop and side wall
or combustible material
must be at least 12" on
each side.
1/2" 12"
26-5/8"
Backguard with Warming Shelf
All Monogram Professional Hoods feature infrared
warming lights. The 22"-high backguard with warming
shelf is a perfect complement when installed with the
tapered or straight-sided hoods.
• If you choose to install this cooktop with a Restaurant
Style Professional Hood, use the 1/2" island trim. These
hoods are shipped with a stainless steel backguard and
warming shelf.
8-7/16"
22-3/4"
46-1/8"
7/8"
2-1/2"
8"
Side View with Required Backguards
2-1/2"
21-1/4"
12"
10"
26-5/8"
High
Shelf
Low Back
36" Min.
to
Combustibles
12" Min. to Combustibles
Without Backguard or 0"
to Non-Combustible Wall
with 1/2" Trim
36" Min.
to
Combustibles
1/2" Trim
0" Clearance
56
monogram.com
48" PROFESSIONAL
RANGES
36" Professional Cooktops
General Features
18,000-BTU grill.The stainless steel grill grate is reversible,
with a smooth surface for delicate foods and a ridged side
for hearty meats, and it slopes forward to allow liquids to
flow away from food.
18,000-BTU griddle.The 3/8"-thick, stainless steel griddle is
also sloped to offer a clean cooking surface. Thermostatic
control ensures even heating and consistent results.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
REAR
OVEN
LIGHT
FRONT
FRONT
REAR
HEATING
ram
Monog
FRONT
36" Professional
Cooktop
ZGU36N4DDSS, ZGU36N4RDSS
and ZGU36N6DSS (natural gas)
ZGU36L4DDSS, ZGU36L4RDSS
and ZGU36L6DSS (liquid
propane)
36" PROFESSIONAL
RANGES
Gas burners. Dual-ring burners with porcelainized burner
grates ensure even heat delivery, and infinite controls
maintain precise temperature settings between 500 and
15,000 BTUs.
Overall Dimensions
(WxHxD in inches):
35-7/8 x 8-7/16 x 26-5/8
Amps @ 120VAC 3.3– 4 burner
1.0– 6 burner
Approx. Shipping Wt. (lbs.) 228
30" PROFESSIONAL
RANGES
■ Offers Three Combinations
of Burners, Grill and Griddle
■ Natural or LP Gas Must Be
Specified by Model Number
■ A 1/2", 12" or 22" Backguard
Must Be Ordered with Range
■ Optional Wok Accessory
Advance Planning for 36" Professional Cooktops
Note: Conversion kits (WB49X10082, Nat. to LP and
WB49X10081, LP to Nat.) are available if the wrong gas type
was ordered. The kits must be installed by a qualified
service technician at additional cost.
• Accessory ZXWK22Y, 22" wok with lid and ring fits all
Professional ranges and cooktops
Cooktops must be supplied with 120V, 60Hz, and connected
to an individual, properly grounded branch circuit protected
by a 15 amp circuit breaker or time-delay fuse.
Locate gas
inlet on
back wall
or on floor
2" from
back wall
48" PROFESSIONAL
C O O K TO P S
• All Professional cooktops are factory set for natural or
liquid propane gas. The correct model should be
ordered for the installation situation.
Electrical Requirements
2"
7"
16"
Gas Supply
• Natural gas models are designed to operate at 5" water
column pressure. A regulator is required at the natural
gas source to provide maximum of 7" water pressure to
the cooktop regulator.
36" PROFESSIONAL
C O O K TO P S
Professional cooktops offer a number of choices in size
and cooktop configurations.
• The liquid propane models are designed to operate at 10"
water column pressure. A regulator is required at the LP
source to provide maximum of 14" water pressure to the
cooktop regulator.
57
Advance Planning for 36" Professional Cooktops
36" Cooktop Surface Configurations
Installation Options
The 36" Monogram Professional Cooktops are available
with a combination of a grill or griddle and 4 burners or
simply 6 burners.
• The cooktop stainless surface will be 1/2" higher than
adjacent countertops.
®
ZGU36N4RDSS
with 4 burners and grill
(Order ZGU36L4RDSS for LP gas)
• In 24"-deep cabinets, the front of the cooktop will be
approximately 1-7/8" beyond the front of the countertop.
Cooktop
26-5/8"
21-1/4"
High
Back
12"
Countertop
Level
8-7/16"
1/2"
Flush With
Cabinet Front
Front Flush With
Cabinets - a Minimum
of 25-3/4" Cabinet
Depth Required
Low Back
Cooktop
3" to Center
Line of Gas Inlet
1/2"
ZGU36N4DDSS
with 4 burners and griddle
(Order ZGU36L4DDSS for LP gas)
22-3/4"
23-1/4"
2-1/2"
Cabinet Face - Projecting Control Panel
Front Projects
Outward as Shown
From Standard
Depth Cabinets.
Cabinet Face - Flush Control Panel
Required Backguards
A backguard must be ordered and installed with these
cooktops (at extra cost). Choose a 22"- or 12"- high
backguard for perimeter installations. Use the 1/2" trim
for island installation or against a non-combustible
surface such as tile or brick.
ZGU36N6DSS
with 6 burners
(Order ZGU36L6DSS for LP gas)
Product Dimensions and Clearances
A 36"-wide professional vent hood with a minimum 600
CFM is recommended for installation over this cooktop.
• Install the hood 30" to 36" above the cooking surface.
Available
s
Backguard
35-7/8"
21-1/4"
1/2" 12"
26-5/8"
8-7/16"
Clearances between
cooktop and side wall
or combustible material
must be at least 12" on
each side.
Backguards: Order one with a 36"-wide cooktop:
ZXC1B36BSS, 1/2" island trim
ZXC12B36YSS, 12" backguard
ZXC22B36ASS, 22" backguard with warming shelf
Backguard with Warming Shelf
All Monogram Professional Hoods feature infrared
warming lights. The 22"-high backguard with warming
shelf is a perfect complement when installed with the
tapered or straight-sided hoods.
• If you choose to install this cooktop with a Restaurant
Style Professional Hood, use the 1/2" island trim. These
hoods are shipped with a stainless steel backguard and
warming shelf.
22-3/4"
35"
1/2"
2-1/2"
8"
Side View with Required Backguards
2-1/2"
21-1/4"
12"
10"
26-5/8"
High
Shelf
Low Back
36" Min.
to
Combustibles
12" Min. to Combustibles
Without Backguard or 0"
to Non-Combustible Wall
with 1/2" Trim
36" Min.
to
Combustibles
1/2" Trim
0" Clearance
58
monogram.com
CHIMNEY HOODS
Advance Planning for Ventilation Systems
Monogram® offers a complete line of venting systems. There's a size and style with the specifications to complement
any kitchen design. Use the following chart as a guide to selecting a hood that suits your ventilation needs.
Wall-Mounted
Island
Professional
Downdraft
ZV750SY
ZV950SDSS ZV850SB
ZV48TSFSS
ZV36TSFSS
ZV1050SFSS ZV30TSFSS
ZV48SSFSS
ZV36SSFSS
ZV30SSFSS
ZV48RSFSS
ZV36RSFSS
ZV30RSFSS
ZVB30SH/WH/BH
ZVB36SH/WH/BH
Chimney
Chimney
Chimney
Tapered
Straight
Restaurant
Integrated
42"
30"
36"
48"
30"
36"
48"
30"
36"
48"
30"
36"
640
640
1200
640
640
1200
500
500
Style
Chimney
36"
36"
36"
PROFESSIONAL HOODS
Width
Blower Rating
(CFM)
360
700
360
1080
640
640
1200
8'-10'
Options
No
8'-10'
Options
No
No
No
No
No
8', 9' Duct
Cover
Included;
10' Ceiling
Duct Cover
Optional
8', 9' or 10'
Duct Cover
Included;
10' to 14'
Duct Cover
Optional
8', 9' or 10'
Duct Cover
Required,
Must Order
Separately
8' Duct
Cover
Included;
9' or 10'
Duct Cover
Optional
Optional
6" and 12"
Duct Covers,
–Stackable
Optional
6" and 12"
Duct Covers,
–Stackable
Optional
6" and 12"
Duct Covers
–Stackable
Indoor,
Outdoor
Remote
Blower
Options
All Non-Pro
Cooktops
All 30" & 36"
Cooktops
and Ranges
All Non-Pro
Cooktops
All 30" & 36"
Cooktops
and Ranges
All
Monogram
Cooktops
and Ranges
All
Monogram
Cooktops
and Ranges
All
Monogram
Cooktops
and Ranges
All Non-Pro
Cooktops
Recirculating
Option
TELESCOPIC
D OW N D R A F T V E N T S
Vented Duct
Cover Options
Monogram
Installation
Combinations
59
Chimney Hoods
General Features
Attractive design. Expertly crafted with uncompromising
attention to detail, a Monogram chimney hood adds a
striking architectural highlight to your kitchen.
Powerful ventilation.The variable-speed fan blower provides
the power necessary to capture the smoke and oily fumes
produced by high-performance cooking equipment.
Timer.The fan can be set for automatic shutoff after 5, 10,
or 20 minutes of operation.
Halogen lighting. Six levels of intensity are offered for
different needs, from accent to ambient settings.
Removable filters. Filters can be easily detached from the
hood for safe cleaning in your dishwasher. An indicator
light signals when filter needs cleaning.
Recirculating Kit (for ZV850 and ZV750 models). An
optional Vent Hood Kit for recirculating air can be installed
for internal ventilation.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
36" Wall-Mount
Vent Hood
36" Island Vent
Hood
ZV750SY
ZV850SB
Overall Dimensions
(WxHxD in inches):
34-5/8 x 8-1/4 x 21-5/8
Amps @ 120VAC
Approx. Shipping Wt. (lbs.)
Overall Dimensions
(WxHxD in inches):
35-3/8 x 8-1/4 x 27-1/2
Amps @ 120VAC
Approx. Shipping Wt. (lbs.)
2.5
81
2.5
81
■ 6" Round Exhaust Duct
■ Optional Extension Duct
Cover Available
■ 8'-9' Ceiling Duct Cover
Included
■ Optional Recirculating Kits
Available
■ 6" Round Exhaust Duct
■ Required Duct Covers Must
be Ordered Separately
■ Optional Recirculating Kits
Available
36" Wall-Mount
Vent Hood
42" Island Vent
Hood
ZV950SDSS
ZV1050SFSS
Overall Dimensions
(WxHxD in inches):
35-5/8 x 10 x 25
Amps @ 120VAC
Approx. Shipping Wt. (lbs.)
Overall Dimensions
(WxHxD in inches):
42 x 10 x 31-1/2
Amps @ 120VAC
8.0
Approx. Shipping Wt. (lbs.) 150
■ Dual Blowers
■ 8" Round Exhaust Duct
■ 8'-10' Ceiling Duct Cover
Included
■ Optional Extension
Duct Covers Available
60
Monogram
Monogram
4.3
110
■ Dual Blowers
■ 8" Round Exhaust Duct
■ 8' Ceiling Duct Cover
Included
■ Optional Extension
Duct Covers Available
monogram.com
Stainless Steel Wall-Mount Hoods
Ductwork for ZV750SY
Chimney vent hoods are available in a 36" width. Both
models are supplied with a two-piece stainless steel duct
cover to conceal the ductwork running from the top of
the hood to the ceiling.
This vent hood must use 6" round duct.
• Use metal ductwork only.
• For satisfactory performance, the duct run should
not exceed 100 feet equivalent length for any duct
configuration. Refer to the Duct Fittings chart in the
installation instructions.
Duct Cover Accessories for Vented Installations
• Install a wall cap or roof cap with damper at the exterior
opening. Order the wall or roof cap and any transition
needed in advance.
Ceiling Height
8 ft.
Up to 9 ft.
Up to 10 ft.
10 ft. to 14 ft.
Decorative Duct Covers
This vent hood is supplied with a two-piece decorative
duct cover that will reach an 8-ft. to 9-ft. ceiling. An
optional accessory, ZX10SY, can be ordered to reach
9-ft. to 10-ft. ceiling heights.
ZV750
Included
Included
ZX10SY
–
ZV950
Included
Included
Included
ZX14SDSS
Structural Support
Ductwork for ZV950SDSS
These vent hoods are heavy. Adequate structural
support must be provided. Hoods must be secured to
vertical studs in the wall or to horizontal supports.
This vent hood must use 8" round duct with a maximum
equivalent duct length of 100 feet. It can transition to
3-1/4" x 12" duct, reducing the maximum equivalent duct
length to 75 feet.
• It is strongly recommended that the vent hood and
duct cover(s) if used, be on-site before final framing
and wall finishing. This will help to accurately locate
the ductwork and electrical service.
• Final installation will be much easier if the hood is
installed before the range or cooktop below.
• Mounting templates are provided with the installation
instructions to help accurately position the hood above
the cooking surface.
Electrical Requirements
These vent hoods must be supplied with 120V, 60Hz, and
connected to an individual, properly grounded branch
circuit protected by a 15 or 20 amp circuit breaker or
time delay fuse.
• The junction box is located at the top of the hood on the
right side. Route the wiring as close to the installation
as possible, on the right side, through the ceiling or
back wall. Refer to the installation instructions for details.
PROFESSIONAL HOODS
• Review the following chart to determine the need for
an accessory duct cover.
• Plan the shortest and straightest route for venting
exhaust to the outdoors.
TELESCOPIC
D OW N D R A F T V E N T S
• The installation height should be determined in
advance. If necessary, accessories for height adjustment
should be ordered with the vent hood and be on-site at
the time of installation.
CHIMNEY HOODS
Advance Planning for Chimney Hoods
• Plan the shortest and straightest route for venting
exhaust to the outdoors.
• Use metal ductwork only.
• For satisfactory performance, the duct run should
not exceed 100 feet equivalent length for any duct
configuration. Refer to the Duct Fittings chart in the
installation instructions.
• Install a wall cap or roof cap with damper at the exterior
opening. Order the wall or roof cap and any transition
needed in advance.
Decorative Duct Covers
This vent hood is supplied with a two-piece decorative
duct cover that will reach an 8-ft. to 10-ft. ceiling. An
optional accessory, ZX14SDSS, can be ordered to reach
10-ft. to 14-ft. ceiling heights.
61
Advance Planning for Chimney Hoods
Product Dimensions and Clearances
Product Dimensions and Clearances
This stainless steel hood can be installed over any
Monogram® cooktop (except Professional models).
This stainless steel hood can be installed over any
Monogram cooktop including a Professional 36" cooktop
and a 36" or 30" Professional range.
Model ZV750SY
*26-1/4" for 8-ft. ceiling
38-1/4" for 9-ft. ceiling
This vent hood must be installed 24" min. to 30" max.
above the cooking surface. The hood installation height,
from the cooktop surface to the bottom of the hood,
depends upon ceiling height.
*Height
to Ceiling
With Accessory
ZX10SY Duct Cover:
38-1/4" to 50-1/4" for
9-ft. to 10-ft. ceiling.
8-1/4"
34-5/8"
21-5/8"
Model ZV950SDSS
*24-1/2" for 8-ft. ceiling
36-1/2" for 9-ft. ceiling
36" to 44" for 9-ft. to 10-ft. ceiling.
(for ceilings between
9'6" and 10 ft. mount
the hood 30" above the
cooking surface).
*Height
to Ceiling
10"
25"
35-5/8"
Note: The supplied two-piece duct cover is adjustable to fit 8-ft. to
10-ft. ceilings. For ceiling heights greater than 10 ft. and up to 14 ft.,
order ZX14SDSS stainless steel duct cover accessory.
The distance between the cooking surface and the bottom
of the hood should be:
*25-1/2" Recommended
25-1/2" max. for 8-ft. ceiling height.
25-1/2" to 30" for 9-ft. ceiling height.
30" min. for 10-ft. ceiling height.
36" Min.
This vent hood must be installed 24" min. to 30" max.
above the cooking surface; 25-1/2" is recommended to
insure that the duct cover meets the ceiling. The cooking
surface should be at least 36" above the floor.
Installation
Height Depending
on Ceiling Height
Recirculating Installation
The ZV750 hood is designed to be vented to the outside,
but it can easily be converted for recirculating operation.
The ZV950 cannot be converted—it must be vented to
the outside.
Recirculating kits are available for the ZV750 hood. These
kits include charcoal filters, an air deflector that fits over
the exhaust outlet and a vented decorative duct cover to
complete the installation. Kits are sized for ceiling height.
Recirculating Installations
Up to 9 ft. ceiling
ZXR758C
Up to 10 ft. ceiling
ZXR7510C
62
36" Min.
Plan the installation height carefully to avoid unsightly
gaps above the hood.
Note: Install the hood 30" min. above the cooking surface over a
Professional range or cooktop.
monogram.com
Stainless Steel Island Hoods
Ductwork for ZV850SB
Chimney vent hoods are available in 36" and 42" widths.
This vent hood must use 6" round duct.
• Duct cover accessories to meet ceiling heights are
required for the ZV850 island hood. One accessory
must be ordered with the vent hood.
• Plan the shortest and straightest route for venting
exhaust to the outdoors.
• The ZV1050 hood is supplied with a duct cover for an
8-ft. ceiling height (7' 11" to 8' 1"). Optional duct cover
accessories are available for 9-ft. and 10-ft.
ceiling heights.
• For satisfactory performance, duct run should not
exceed 100 feet equivalent length for any duct
configuration. Refer to the Duct Fittings chart in the
installation instructions.
• The installation height must be determined in advance
for both models.
• Install a wall cap or roof cap with damper at the
exterior opening. Order the wall or roof cap and any
transition needed in advance.
Required Duct Cover Accessories for
Vented Installations
Ceiling Height
8 ft.
Up to 9 ft.
Up to 10 ft.
ZV850
ZX858
ZX859
ZX8510
ZV1050
Supplied
ZX1059SFSS
ZX10510SFSS
Structural Support
These vent hoods are heavy. Adequate structural support
must be provided. Hoods must be secured to cross
framing positioned between ceiling joists.
PROFESSIONAL HOODS
• Review the following chart to determine the
appropriate accessory duct cover.
• Use metal ductwork only.
Ductwork for ZV1050SFSS
This vent hood must use 8" round duct.
• Plan the shortest and straightest route for venting
exhaust to the outdoors.
• Use metal ductwork only.
• For satisfactory performance, duct run should not
exceed 100 feet equivalent length for any duct
configuration. Refer to the Duct Fittings chart in the
installation instructions.
TELESCOPIC
D OW N D R A F T V E N T S
• All duct cover accessories must be ordered with the
vent hood and be on-site at the time of installation.
CHIMNEY HOODS
Advance Planning for Chimney Hoods
• Install a wall cap or roof cap with damper at the
exterior opening. Order the wall or roof cap and any
transition needed in advance.
• The vent hood and duct cover(s) must be on-site before
final framing and wall finishing. This will help to
accurately locate the ductwork and electrical service.
• Final installation will be much easier if the hood is
installed before the range or cooktop below.
• Mounting templates are provided with the installation
instructions to help accurately position the hood on the
ceiling above the cooking surface.
Electrical Requirements
These vent hoods must be supplied with 120V, 60Hz, and
connected to an individual, properly grounded branch
circuit protected by a 15 or 20 amp circuit breaker or
time delay fuse.
• The junction box is located on top of the hood. Route
the wiring as close to the installation as possible
through the ceiling. Refer to the installation instructions
for details.
63
Advance Planning for Chimney Hoods
Product Dimensions and Clearances
Product Dimensions and Clearances
This stainless steel hood can be installed over any
Monogram® cooktop (except Professional models).
This stainless steel hood can be installed over any
Monogram cooktop or range, including Professional
models.
Model ZV850SB
*26-1/4" for 8-ft. ceiling using
ZX858SB Accessory
Model ZV1050SFSS
*20" for 8-ft. ceiling using
supplied duct cover
*Height
to Ceiling
38-1/8" for 9-ft. ceiling using
ZX859SB Accessory
50-1/8" for 10-ft. ceiling using
ZX8510SB Accessory
8-1/4"
35-3/8"
27-1/2"
*25-1/2" Recommended
36" Min.
This vent hood must be installed 24" min. to 30" max.
above the cooking surface; 25-1/2" is recommended to
ensure that the duct cover meets the ceiling. The cooking
surface should be at least 36" above the floor.
Recirculating Installation
The ZV850 hood is designed to be vented to the outside,
but it can easily be converted for recirculating operation.
(The ZV1050 is not convertible to recirculating operation.)
Recirculating kits are available for the ZV850 hood. These
kits include charcoal filters, a support frame with air
deflector and a vented decorative duct cover to complete
the installation. Kits are sized for ceiling height.
Recirculating Installations
8 ft.
ZXR858C
9 ft.
ZXR859C
10 ft.
ZXR8510C
64
32" for 9-ft. ceiling using
ZX1059SFSS Accessory
44" for 9-ft. ceiling using
ZX10510SFSS Accessory
*Height
to Ceiling
10"
31-1/2"
42"
This vent hood is supplied with a decorative duct cover
to reach 8-ft. ceiling height, or between 7' 11" and 8' 1".
*30"
Recommended
36" Min.
*9-ft. to 10-ft. ceilings may be 25-1/2" to 30" clearance.
The distance between the cooking surface and the bottom
of the hood must be at least 25-1/2". The 30" recommended
installation height above the standard 36" countertop
will ensure duct cover fit to the ceiling. For 9-ft. and 10-ft.
ceiling heights, the hood may be lowered to 25-1/2" over
the cooking surface.
• When installing this island hood above a Monogram
Professional range or cooktop, installation clearance
must be at least 30".
Important: Clearances may vary due to type of cooking product and
local codes. Check with local inspectors to be sure the standard
is applicable.
monogram.com
48", 36" and 30"
Straight-Sided
Hoods
ZV48RSFSS, ZV36RSFSS and
ZV30RSFSS
ZV48TSFSS, ZV36TSFSS and
ZV30TSFSS
ZV48SSFSS, ZV36SSFSS and
ZV30SSFSS
Overall Dimensions
(WxHxD in inches):
48 x 22-1/2 x 25
36 x 22-1/2 x 25
30 x 22-1/2 x 25
Amps @ 110 Volts 12.5/6.5/6.5
Approx. Shipping
Wt. (lbs.)
130/110/100
Overall Dimensions
(WxHxD in inches):
48 x 18 x 25
36 x 18 x 25
30 x 18 x 25
Amps @ 110 Volts 12.5/6.5/6.5
Approx. Shipping
Wt. (lbs.)
130/110/100
Overall Dimensions
(WxHxD in inches):
48 x 18 x 25
36 x 18 x 25
30 x 18 x 25
Amps @ 110 Volts 12.5/6.5/6.5
Approx. Shipping
Wt. (lbs.)
130/110/100
■ 10" Round Exhaust Duct
■ Exhaust Damper
■ Snap-In Blower Assembly
■ 6" and 12" Stackable Duct
Covers (order separately)
■ Stainless Steel Backsplash
Included
■ Warming Shelf Included
■ 10" Round Exhaust Duct
■ Exhaust Damper
■ Snap-In Blower Assembly
■ 6" and 12" Stackable Duct
Covers (order separately)
■ 10" Round Exhaust Duct
■ Exhaust Damper
■ Snap-In Blower Assembly
■ 6" and 12" Stackable Duct
Covers (order separately)
PROFESSIONAL HOODS
48", 36" and 30"
Tapered-Sided
Hoods
TELESCOPIC
D OW N D R A F T V E N T S
48", 36" and 30"
Restaurant-Style
Hoods
CHIMNEY HOODS
Professional Hoods
General Features
Seamless appearance.The welded, double-wall construction offers an
unmistakably refined appearance.
Powerful ventilation. A powerful centrifugal blower, up to 1200 CFM, and
variable-speed control keep the kitchen free of fumes and excess heat.
Infrared warming lamps. Powerful infrared lamps cast a warm glow over the
cooking center, while generating the heat necessary to keep baked goods at
ready-to-serve temperatures.
Brilliant task lighting. Halogen-illuminated lights allow easy reading of recipes
and can be adjusted to complement the dining occasion.
Removable filters. During ventilation, stainless steel filters trap airborne grease
particles, and can be easily removed for safe cleaning in your dishwasher.
For additional details on product installation, warranty coverage, care and
maintenance, visit Monogram.com.
65
Advance Planning for Professional Hoods
Professional Vent Hoods
Select a professional hood with straight or tapered sides.
Or choose a dramatic restaurant-style hood to match the
width of the range or cooktop. All Professional hoods are
available in 30", 36" and 48" widths.
• All models can be installed onto a wall or beneath a soffit.
Decorative duct covers are available for all models. The
duct cover conceals the ductwork running from the top of
the hood to the ceiling or soffit. Duct covers are available
in 6" or 12" heights. Stack one or more duct covers to
reach your ceiling height.
Structural Support
Restaurant-Style Hood Dimensions
These vent hoods are equipped for 10" round ductwork. For
best performance, use 10" round ductwork on the 48" wide
hoods. 30" and 36" hoods may be transitioned to 8" round.
10"
10"
22-1/2"
22-1/2"
47-15/16"
25"
25"
ZV48RSFSS
35-15/16"
ZV36RSFSS
12"
29-15/16"
10"
22-1/2"
25"
29-15/16"
ZV30RSFSS
Tapered-Sided Hood Dimensions
• Final installation will be much easier if the hood is
installed before the range or cooktop below.
Ductwork Planning
35-15/16"
47-15/16"
All Professional hoods weigh over 100 pounds. Therefore
adequate structural support must be provided. Hoods
must be secured to vertical studs or to studs in the soffit.
• It is strongly recommended that the vent hood and duct
cover(s) if used, be on-site before final framing and wall
finishing. This will help to accurately locate the ductwork
and electrical service.
12"
12"
40"
12"
18"
12"
28"
18"
25"
ZV48TSFSS
• Hoods may be vented vertically through upper cabinets,
soffit or ceiling. The blower outlet is 8-1/8" x 8". A duct
transition to 10" round with damper is supplied for vertical
exhaust. Use locally supplied elbows to vent horizontally.
12"
25"
47-15/16"
35-15/16"
ZV36TSFSS
22"
18"
• Plan the shortest and straightest route for venting
exhaust to the outdoors.
25"
29-15/16"
• Use metal ductwork only.
• For satisfactory performance, duct run should not exceed
150 feet equivalent length for any duct configuration. Refer
to the Duct Fittings chart in the installation instructions.
• Install a wall cap or roof cap with damper at the exterior
opening. Order the wall or roof cap and any transition
needed in advance.
Electrical Requirements
These vent hoods must be supplied with 120V, 60Hz, and
connected to an individual, properly grounded branch
circuit protected by a 15 or 20 amp circuit breaker or time
delay fuse.
ZV30TSFSS
Straight-Sided Hood Dimensions
12"
18"
• The junction box is fastened to the back of the hood on
the right side. If necessary, the junction box can be
relocated to the top of the hood.
66
35-15/16"
18"
25"
47-15/16"
12"
29-15/16"
18"
25"
ZV30SSFSS
25"
ZV36SSFSS
ZV48SSFSS
• The recessed back side of the hood provides a large area
for the house wiring to exit the wall and be routed to the
rear knockout and junction box.
• The exact location for the house wiring depends on the
installation height and size of the hood. See
installation instructions for details.
12"
47-15/16"
29-15/16"
35-15/16"
monogram.com
Installation Height Requirements
Duct Cover Accessories
Tapered- and Straight-Sided Hoods
Install these vent hoods 30" min. to 36" max. above the
cooking surface of any Professional range or cooktop. If
you intend to install the hood above a gas or electric
drop-in style cooktop, the hoods may be installed as low
as 24" above the cooking surface.
Decorative duct covers are designed to complement all
Professional hoods. Available in 6" and 12" heights. duct
covers may be stacked in various combinations to conceal
the ductwork running from the top of the hood.
12" Duct Cover
6" Duct Cover
30" MIN.
36" MAX.
Restaurant-Style Hoods
Determine bottom of hood location (Dimension A) by
subtracting 12-1/2" from the desired installation height.
Note: Exact installation height is
affected by the use of the supplied
warming shelf and by the use of
duct covers.
• To avoid unsightly gaps above the hood, plan the hood
installation height with consideration to duct cover use.
PROFESSIONAL HOODS
Note: Exact installation height may be
determined by use of one or more
duct covers.
CHIMNEY HOODS
Advance Planning for Professional Hoods
Hood
ZV48
ZV36, ZV30
6" Duct Cover
ZX48DC6
ZX36DC6
Dimensions (in inches)
6H x 19-11/16W x 11-7/8D
6H x 15-3/4W x 11-7/8D
Hood
ZV48
ZV36, ZV30
12" Duct Cover Dimensions (in inches)
ZX48DC12
12H x 19-11/16W x 11-7/8D
ZX36DC12
12H x 15-3/4W x 11-7/8D
Using Duct Cover Accessories
Use the following formulas to calculate the need for
one or more duct covers and to ensure a trouble-free
installation.
TELESCOPIC
D OW N D R A F T V E N T S
Installation
Height
Dim. A
Tapered- or Straight-Sided Hoods
Ceiling Height
Restaurant-Style hoods are supplied with a stainless
steel backguard and a warming shelf. Install the hood
with or without either. Clearances to the cooking surface
will vary depending upon use of the warming shelf.
A-B=C
B
18" Hood
Height
A
C
A = Countertop to ceiling height.
B = Gap at the top of the hood to
the ceiling.
C = Hood installation height, plus
18" hood height.
30" Min.
36" Max.
32" Min.
38" Max.
Note: Dimension C should be between 48" and 54" (for a 30" to 36"
installation height). Raise or lower the hood installation height to
allow use of one or more 6" or 12" duct covers.
Restaurant-Style Hoods
Ceiling Height
A-B=C
B
Installation Without
Warming Shelf
Install these vent hoods 30" min.
to 36" max. above the cooking
surface of any Professional style
range or cooktop.
Installation With Supplied
Warming Shelf
Install the hood 32" min. to
38" max. above any type cooking
surface when the warming shelf
is used.
If you are installing the hood above a gas or electric
drop-in style cooktop, the hoods may be installed as low
as 24" above the cooking surface.
A = Countertop to ceiling height.
A
C
10"
Hood
Height
B = Gap at the top of the hood to
the ceiling.
C = Hood installation height, plus
10" hood height.
Note: Dimension C should be between 40" and 46" (for a 30" to 36"
installation height). Raise or lower the hood installation height to
allow use of one or more 6" or 12" duct covers.
67
Telescopic Downdraft Vents
General Features
Powerful ventilation. A 3-1/4" x 10" rectangular duct and a
durable, stainless steel vent capture smoke and odors at
the cooking surface. A variable-speed fan blower exhausts
the air at a rate of 500 CFM.
Removable filters. Filters can be easily removed for safe
cleaning in your dishwasher.
Remote blower placement installation kit.To reduce
noise in the kitchen, an outdoor or indoor installation kit
is offered for remote blower placement.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
36" Telescopic
Downdraft Vent
30" Telescopic
Downdraft Vent
ZVB36SHSS, ZVB36WHWW
and ZVB36BHBB
ZVB30SHSS, ZVB30WHWW
and ZVB30BHBB
Overall Dimensions
(WxHxD in inches):
36 x 8-1/2 x 2-1/8
Amps @ 120VAC
Approx. Shipping Wt. (lbs.)
Overall Dimensions
(WxHxD in inches):
30 x 8-1/2 x 2-1/8
Amps @ 120VAC
Approx. Shipping Wt. (lbs.)
.5
62
■ 3-1/4" x 10" Rectangular
Duct
■ Stainless Steel Vent Body
■ Indoor Remote Blower Kit
■ Outdoor Remote Blower Kit
with Cover
.5
60
■ 3-1/4" x 10" Rectangular
Duct
■ Stainless Steel Vent Body
■ Indoor Remote Blower Kit
■ Outdoor Remote Blower Kit
with Cover
Important Installation Note: The installation of these downdraft
vents in combination with any Monogram cooktop requires
an extra-deep countertop. The flat surface of the countertop
must be deep enough, front to back, to accommodate the
combined depth of the vent and cooktop together. Additional
clearances required by UL from the cutout to the front edge
of the countertop also vary by model and must be considered.
Be sure to review the Downdraft Vent Installation Instructions
carefully. These instructions provide exact cutout and countertop
area requirements for the installation of the vent with each
specific Monogram cooktop.
68
monogram.com
These downdraft vent systems are ideal for island and
peninsula cooking centers because they retract nearly
flush with the countertop. They may be installed with
any Monogram® electric or gas cooktop (except
Professional models).
CHIMNEY HOODS
Advance Planning for Telescopic Downdraft Vents
Both the 30" and 36" models are equipped with a
separate raise/lower switch. The switch must be installed
in a separate location outside of the vent and
cooktop cutout.
Separate Raise/
Lower Switch
A
PROFESSIONAL HOODS
B
27"
Countertop Requirements
Countertops must have a deep flat surface to
accommodate the cooktop and the vent. Countertops
with a rolled edge and backsplash may not provide the
flat surface area required.
B
28-1/2"
34"
2"
8-1/2"
Lift
7-1/2" 2-1/4"
6-1/4"
10-1/2"
3-3/8"
7-1/8"
Downdraft Vent and Cooktop Cutout
The installation of these downdraft vents with any
Monogram cooktop requires careful consideration. For
accurate planning, review the individual dimension
drawings for the combined vent and Monogram
cooktop installation.
Before you begin you must:
3-1/8"
3-3/4"
Base Cabinet Requirements
The base cabinet must be deep enough to
accommodate the minimum clearance to the front edge
of the countertop, the cooktop burner box and the vent.
TELESCOPIC
D OW N D R A F T V E N T S
30" Models
36" Models
A
30"
36"
1. Review countertop dimension illustrations to be sure
you will have enough flat countertop surface depth.
2. Check to be sure that the total countertop depth
required (including minimum cutout to front edge
depth) allows enough space for a backsplash.
3. Review the cabinet illustration. Check to be sure that
the interior cabinet depth will house the cooktop
burner box, the vent and the cutout clearance from
the front.
4. When countertop and cabinet depth present a
problem, review Creative Solutions.
5. Read this section completely to accurately plan the
installation location, clearances and ductwork
requirements.
With careful planning you can achieve a custom look
with minimal adjustments.
69
Advance Planning for Telescopic Downdraft Vents
Creative Solutions
Optional Accessories
Against-the-wall installation
Move the base cabinet forward, 3" to 5". Filler panels or
complimentary moldings can be added to the exposed
cabinet sides.
JXRB67 Accessory for indoor remote location of the
blower/motor assembly. Use this kit when the blower
and motor assembly will be located outside of the cabinet,
such as below the cabinet floor. The assembly will fit
between 16" floor joists.
Maintain Cutout Clearances
to Front Edge as Specified
JXBC67 Outdoor cover accessory for remote installation of
the blower/motor assembly on an outside wall.
Ductwork
Prepare the ductwork to vent to the outdoors.
• Plan the shortest and straightest route for venting
exhaust to the outdoors.
Filler Panel
Filler Panel
Base Cabinet
• The maximum permissible length for the duct run
is 150 feet.
• Use metal ductwork only.
Base Sink
• The downdraft blower system is designed to use
3-1/4" x 10" duct. It can be transitioned to 6" round.
Island or peninsula installation
Use an extra-deep countertop. The countertop overhang at
the front can be adjusted to meet setback to cutout
requirements.
Countertop Overhang per Cooktop
Clearances Must be Maintained
Venting Options
End
Panel
Base Sink
• Install a wall cap or roof cap with damper at the exterior opening. Order the wall cap and any
transition needed in advance.
The downdraft vent is shipped with the discharge
outlet pointing straight down and can be changed to
a left- or right-side discharge. For even more flexibility, the
entire blower and mounting plate can be adjusted 3-1/2"
to the left or right sides.
Cover Panel
Decorative trim
When the cutout to front edge of the countertop
requirement is more than 2", add a bullnose trim to the
front edge of the countertop. The additional trim allows
the cooktop to be moved forward, providing additional
countertop depth and interior cabinet space.
Trim
Add a Bullnose
Trim or Decorative
Molding to
Increase
Countertop
Depth and to
Maintain
Required
Clearance From
Front Edge
70
1-7/8"
Discharge Down
(As Supplied)
Discharge Left
DOWNDRAFT
VENT
Discharge Right
monogram.com
Electrical and Gas Locations
Cutouts and Clearances
Plan the placement of the electrical outlet and gas (if
used) carefully. Gas or electrical outlets cannot be located
on the back wall of the cabinet because they may interfere
with the downdraft plenum.
Identify the cutout illustration for the Monogram cooktop
model you are installing.
CHIMNEY HOODS
Advance Planning for Telescopic Downdraft Vents
ZEU769 Electric Cooktops with 36" Vent
Do Not Locate Gas or Electrical
Connections Within Shaded Area
1-3/4" Min. Cooktop Cutout to Rear
Vertical Combustible Surface
36"
PROFESSIONAL HOODS
1/4" Overlap
1/8" Gap
29-1/2"
5/8" Cooktop Overlap
34" for 36" Models
28-1/2" for 30" Models
2-1/2" Min. Clearance to Cutout
Front Edge
of Countertop
• Install a standard electrical outlet within reach of the
vent’s two-foot-long power cord. Locate the outlet
inside the cabinet on the right side wall.
• If the vent is installed in combination with a
Monogram® gas cooktop, it may operate from the
same 120V standard duplex outlet.
• If the vent is installed in combination with a Monogram
electric cooktop, the vent must operate from a separate
120V outlet.
22-1/2"
Total Flat
Surface
Required
34" Cooktop and Vent Cutout
2" Min. Cutout
to Side Walls
Countertop Cutout: Requires 22-1/2" flat countertop surface and
24-3/8" total countertop depth.
2-1/2" to
Cutout
TELESCOPIC
D OW N D R A F T V E N T S
Electrical
Outlet
12" Above
Cabinet Floor
21-3/4"
Cutout
Depth
1-7/8"
ZEU769 Cooktop
19-7/8"
3/4"
3/4"
Thick
Support
Rail
DOWNDRAFT VENT
22-3/4" to Back Wall
22" to Support Rail
24-3/4"
Cabinet: Requires 22-1/2" inside cabinet depth. Remove rear
support rail.
71
Advance Planning for Telescopic Downdraft Vents
ZEU30R Digital Cooktops with 30" Vent
ZEU36R Digital Cooktops with 36" Vent
1-3/4" Min. Cooktop Cutout to Rear
Vertical Combustible Surface
1-3/4" Min. Cooktop Cutout to Rear
Vertical Combustible Surface
29-7/8" (SS)
1/4" Overlap
29-3/4" (B,W)
1/8" Gap
22-1/4"
Cutout
Depth
23-1/2" (SS)
23-3/8" (B,W)
Total Flat
Surface
Required
at Center
28-1/2"
Cooktop Area Cutout
5/8" Cooktop Overlap
(1-1/8" at Center)
Front Edge
of Countertop
2-1/2" Min.
Clearance to Cutout
2" Min. Cutout
to Side Walls
Countertop Cutout: Requires 23-3/8" (B,W) 23-1/2" (SS) flat
countertop surface. Requires 24-3/4" (B,W) and 24-7/8" (SS) total
countertop depth.
2-1/2" to
Cutout
3/4"
Thick
Support
Rail
DOWNDRAFT VENT
22-3/4" to Back Wall
22" to Support Rail
24-3/4"
Cabinet: Requires 23" inside cabinet depth. See Creative Solutions,
install in an island or move cabinet base forward.
72
1/4" Overlap
1/8" Gap
2-3/4"
21-3/4"
Cutout
Depth 19-1/8"
Cooktop
Cutout
Depth
23" (SS)
22-7/8" (B,W)
Total Flat
Surface
Required
34"
Cooktop and Vent Cutout
5/8" Cooktop Overlap
(1-1/8" at Center)
2-1/2" Min.
Clearance to Cutout
Front Edge
of Countertop
2" Min. Cutout
to Side Walls
Countertop Cutout: Requires 22-7/8" (B,W) 23" (SS) flat
countertop surface. Requires 24-1/4" (B,W) and 24-3/8" (SS) total
countertop depth.
2-1/2" to
Cutout
1-7/8"
ZEU30 Cooktop
20-3/8"
3/4"
36-1/8" (SS)
36" (B,W)
1-7/8"
ZEU36 Cooktop
19-7/8"
3/4"
3/4"
Thick
Support
Rail
DOWNDRAFT VENT
22-3/4" to Back Wall
22" to Support Rail
24-3/4"
Cabinet: Requires 22-1/2" inside cabinet depth. Remove rear
support rail.
monogram.com
ZGU36GG Gas Cooktops with 36" Vent
3-3/8" Min. Cooktop Cutout to Rear
Vertical Combustible Surface
1/4" Overlap
36"
1/4" Overlap
1/8" Gap
2-9/16"
22-3/4"
Total Flat
Surface
Required
35-5/16"Cooktop
Area Cutout
18-7/8"
Cooktop
Cutout
7/16" Cooktop Overlap
(1-1/4" At Center)
2-3/4" Min.
Clearance to Cutout
Front Edge
of Countertop
11-9/16" Min. Cutout
to Side Walls
Countertop Cutout: Requires 22-3/4" flat countertop surface and
24-1/4" total countertop depth.
2-3/4" to
Cutout
19-7/16"
1"
34" Cooktop and Vent Cutout
13/16" Cooktop Overlap
(1-1/2" at Center)
2-1/2" Min.
Clearance to Cutout
Front Edge
of Countertop
3/4"
Thick
Support
Rail
DOWNDRAFT VENT
22-3/4" to Back Wall
22" to Support Rail
24-3/4"
Cabinet: Requires 22-5/16" inside cabinet depth. Remove rear
support rail.
6" Min. Cutout
to Side Walls
Countertop Cutout: Requires 23-3/8" (B,W) 23-1/2" (SS) flat
countertop surface. Requires 24-3/8" (B,W) and 24-1/2" (SS) total
countertop depth.
2-1/2" to
Cutout
1-7/8"
ZGU375 Cooktop
21-3/4"
Cutout
Depth
1/8" Gap
23-1/2" (SS)
23-3/8" (B,W)
Total Flat
Surface
Required
at Center
PROFESSIONAL HOODS
36-1/2"
34" Vent Cutout
21-7/16"
Cutout
Depth
2-1/4" Min. Cooktop Cutout to Rear
Vertical Combustible Surface
9/16"
9/16"
1-7/8"
ZGU36 Cooktop
20-1/16"
3/4"
TELESCOPIC
D OW N D R A F T V E N T S
ZGU375 Gas Cooktops with 36" Vent
CHIMNEY HOODS
Advance Planning for Telescopic Downdraft Vents
3/4"
Thick
Support
Rail
DOWNDRAFT VENT
22-3/4" to Back Wall
22" to Support Rail
24-3/4"
Cabinet: Requires 22-11/16" inside cabinet depth. Remove rear
support rail.
73
48" Outdoor Cooking Centers
General Features
Gourmet Radiant™ trays. Beneath the grill racks, uniquely
designed trays ensure even heat distribution, reduce
grease flare-ups.
Porcelain-coated, cast-iron grill burners.Two 20,000-BTU “H”
burners evenly heat the entire grilling area.
HOLD 10 SEC. WHILE LIGHTING
REAR
ROTISSERIE
GRILL
SMOKER
GRILL
ROTISSERIE
FRONT
ROTESSERIE
IGNITOR
GRILL
IGNITOR
SMOKER
IGNITOR
GRILL
IGNITOR
GRILL
ROTISSERIE
GRILL
SMOKER
GRILL
GRILL
IGNITOR
GRILL
IGNITOR
ROTISSERI
IGNITOR
GRILL
IGNITOR
ROTESSERIE
IGNITOR
GRILL
IGNITOR
SMOKER
IGNITOR
GRILL
IGNITOR
GRILL
IGNITOR
Heavy-duty grill racks.The heavy, heat-retaining grill racks
are porcelain enameled for easy cleaning and long life.
48" Outdoor
Cooking Center
48" Outdoor
Cooking Center
Brass valves. Burner controls are mounted on durable
brass valves, ensuring long life in an outdoor environment.
ZGG48N42CSS (natural gas)
ZGG48N31CSS (natural gas)
ZGG48L42CSS (liquid propane)
ZGG48L31CSS (liquid propane)
Overall Dimensions
(WxHxD in inches):
47-7/8 x 22 x 25-3/8
Approx. Shipping Wt. (lbs.) 330
Overall Dimensions
(WxHxD in inches):
47-7/8 x 22 x 25-3/8
Approx. Shipping Wt. (lbs.) 300
■ Built-In or Portable
■ Natural or LP Gas Must Be
Specified by Model Number
■ Stainless Steel Cart Available
■ Insulated Jacket Required
for Combustible Enclosure
■ Conversion Kit Available
■ Built-In or Portable
■ Natural or LP Gas Must Be
Specified by Model Number
■ Stainless Steel Cart Available
■ Insulated Jacket Required
for Combustible Enclosure
■ Conversion Kit Available
Infrared rotisserie system. A ceramic infrared burner,
mounted behind the motorized rotisserie, reaches cooking
temperature in just 30 seconds.
Built-in smoker system. Includes an independent
5000-BTU burner with variable temperature control and a
full-extension, slide-out drawer for wood chips.
Slide-out drip tray.The stainless steel drip tray below the
grill and cooktop burners collects grease and spills and
slides out for easy cleaning.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
74
HOLD 10 SEC. WHILE LIGHTING
HOLD 10 SEC. WHILE LIGHTING
GRILL
monogram.com
48" Product Dimensions
Additional Clearances
ZGG48N42CSS
4 grill burners,
2 rotisserie burners
(Order ZGG48L42CSS
for LP Gas)
Observe all clearances shown.
• Allow at least 12" clearance on each side to combustible
vertical surfaces and at the rear when exhaust is directed
to a window or a surface that is difficult to clean.
12" Min. to Combustibles
3" Clearance for Lid
12-1/2"
9-1/2"
47-7/8"
22-5/8"
25-3/8"
Built-In Accessories
2"
Cutouts for Built-In Installations
Installation in a non-combustible (masonry) enclosure
The grill drops into the opening and hangs from its side
flanges. A deck is not required for support.
Install Electrical
Outlet for Rotisserie
On Right Side
(6.5 AMP Min.)
ZXADYSS Stainless Steel Double Access Doors
Optional accessory to cover the access opening under
the grill in a built-in installation.
ZX48CV4Y Vinyl Cover fits built-in 48" models with
4 grill burners.
ZX48CV3Y Vinyl Cover fits built-in 48" models with
3 grill burners and 2 cooktop burners.
ZX48CTACSS 48" Grill Cart
45-3/4"
23-3/4"
35-1/2"
Max.
This cart has a fold-down shelf on each side. Inside is a
shelf for utensils and condiment bins on the door.
Behind the other door is a slide-out tray for easy access
to the LP tank.
27" OUTDOOR
COOKING CENTERS
12" Min. to
Combustibles
3" Clearance
for Lid
• Allow at least 6" clearance on each side to any noncombustible material located above the cooking surface.
Rotisserie models also require 6" clearance for placing
and handling the motor and skewer.
36" OUTDOOR
COOKING CENTERS
ZGG48N31CSS
3 grill burners,
2 cooktop burners,
1 rotisserie burner
(Order ZGG48L31CSS
for LP Gas)
48" OUTDOOR
COOKING CENTERS
Advance Planning for 48" Outdoor Cooking Centers
18-1/2"
4x4 Opening
for Gas Supply
Line
Opening For
Access Doors
HOLD 10 SEC. WHILE LIGHTING
REAR
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
Installation in a combustible enclosure
ZX48JYSS insulated jacket is required
The insulated jacket must be supported from the bottom
by a solid deck or ledge on each side beneath the jacket.
Construct the enclosure as shown and place the insulated
jacket into the enclosure. Place the cooking center into
the jacket.
Install Electrical
Outlet for Rotisserie
On Right Side
(6.5 AMP Min.)
51-3/4"
GRILL
ROTISSERIE
GRILL
SMOKER
GRILL
GRILL
ROTESSERIE
GRILL
SMOKER
GRILL
IGNITOR
IGNITOR
IGNITOR
IGNITOR
IGNITOR
Slide-Out
Tank Tray
Grill Cart Dimensions:
48"W x 35-5/8"H x 25-1/4"D
Shelf Dimensions:
21"D x 16"W
Cart Accessories
ZX48CVCC Vinyl Cover fits all 48" models installed
on a cart.
23-3/4"
D UA L- B U R N E R
O U T D O O R C O O K TO P
12" Min. to
Combustibles
3" Clearance
for Lid
FRONT
IGNITOR
24" OUTDOOR
COOKING CENTER
9-1/8"
35-1/2"
Max.
18-1/2"
10-1/8"
4x4 Opening
for Gas Supply
Line
3-1/8"
Opening For
Access Doors
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
75
36" Outdoor Cooking Centers
General Features
Gourmet Radiant™ trays. Beneath the grill racks, these
uniquely designed trays ensure even heat distribution.
They also reduce grease flare-ups, eliminate the need for
lava rocks or briquettes and remove easily for cleanup.
HOLD 10 SEC. WHILE LIGHTING
Porcelain-coated, cast-iron grill burners.Two 20,000-BTU “H”
burners provide the power necessary to evenly heat the
entire grilling area.
REAR
ROTISSERIE
GRILL
SMOKER
FRONT
ROTESSERIE
IGNITOR
GRILL
IGNITOR
SMOKER
IGNITOR
ROTISSERIE
GRILL
SMOKER
GRILL
GRILL
IGNITOR
GRILL
IGNITOR
ROTESSERIE
IGNITOR
GRILL
IGNITOR
SMOKER
IGNITOR
GRILL
IGNITOR
GRILL
IGNITOR
36" Outdoor
Cooking Center
36" Outdoor
Cooking Center
ZGG36N31CSS (natural gas)
ZGG36N21CSS (natural gas)
Brass valves. Burner controls are mounted on durable
brass valves, ensuring long life in an outdoor environment.
ZGG36L31CSS (liquid propane)
ZGG36L21CSS (liquid propane)
Infrared rotisserie system. A ceramic infrared burner,
mounted behind the motorized rotisserie, reaches cooking
temperature in just 30 seconds.
Overall Dimensions
(WxHxD in inches):
35-7/8 x 22 x 25-3/8
Approx. Shipping Wt. (lbs.) 250
Overall Dimensions
(WxHxD in inches):
35-7/8 x 22 x 25-3/8
Approx. Shipping Wt. (lbs.) 250
■ Built-In or Portable
■ Natural or LP Gas Must Be
Specified by Model Number
■ Stainless Steel Cart Available
■ Insulated Jacket Required
for Combustible Enclosure
■ Conversion Kit Available
■ Built-In or Portable
■ Natural or LP Gas Must Be
Specified by Model Number
■ Stainless Steel Cart Available
■ Insulated Jacket Required
for Combustible Enclosure
■ Conversion Kit Available
Heavy-duty grill racks.The heavy, heat-retaining grill racks
are porcelain enameled for easy cleaning and long life.
Built-in smoker system. Includes an independent
5000-BTU burner with variable temperature control
and a full-extension, slide-out drawer for wood chips.
Slide-out drip tray.The stainless steel drip tray below the
grill and cooktop burners collects grease and spills and
slides out for easy cleaning.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
76
HOLD 10 SEC. WHILE LIGHTING
GRILL
monogram.com
36" Product Dimensions
Additional Clearances
12" Min to Combustibles
3" Clearance for Lid
12-1/2"
9-1/2"
ZGG36N21CSS
2 grill burners,
2 cooktop burners,
1 rotisserie burner
(Order ZGG36L21CSS
for LP Gas)
• Allow at least 6" clearance on each side to any noncombustible material located above the cooking surface.
Rotisserie models also require 6" clearance for placing
and handling the motor and skewer.
35-7/8"
22-5/8"
25-3/8"
Built-In Accessories
2"
Cutouts for Built-In Installations
Installation in a non-combustible (masonry) enclosure
The grill drops into the opening and hangs from its side
flanges. A deck is not required for support.
Install Electrical
Outlet for Rotisserie
On Right side
(6.5 AMP Min.)
12" Min. to Combustibles
3" Clearance for Lid
34-1/2"
Observe all clearances shown.
• Allow at least 12" clearance on each side to combustible
vertical surfaces and at the rear when exhaust is directed
to a window or a surface that is difficult to clean.
36" OUTDOOR
COOKING CENTERS
ZGG36N31CSS
3 grill burners,
1 rotisserie burner
(Order ZGG36L31CSS
for LP Gas)
48" OUTDOOR
COOKING CENTERS
Advance Planning for 36" Outdoor Cooking Centers
ZXADYSS Stainless Steel Double Access Doors
Optional accessory to cover the access opening under
the grill in a built-in installation.
ZX36CV3Y Vinyl Cover fits built-in 36" models with
3 grill burners.
ZX36CV2Y Vinyl Cover fits built-in 36" models with
2 grill burners and 2 cooktop burners.
ZX36CTACSS 36" Grill Cart
35-1/2"
Max.
This cart has a fold-down shelf on each side. Inside is a
shelf for utensils and condiment bins on the door. Behind
the other door is a slide-out tray for easy access to the
LP tank.
27" OUTDOOR
COOKING CENTERS
22-3/4"
18-1/2"
4x4 Opening
for Gas Supply
Line
Opening for
Access Doors
HOLD 10 SEC. WHILE LIGHTING
REAR
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
Installation in a combustible enclosure
ZX36JYSS insulated jacket is required
The insulated jacket must be supported from the bottom
by a solid deck or ledge on each side beneath the jacket.
Construct the enclosure as shown and place the insulated
jacket into the enclosure. Place the cooking center into
the jacket.
Install Electrical
Outlet for Rotisserie
On Right side
(6.5 AMP Min.)
ROTISSERIE
GRILL
SMOKER
GRILL
ROTESSERIE
GRILL
SMOKER
GRILL
IGNITOR
IGNITOR
IGNITOR
IGNITOR
Slide-Out
Tank Tray
Grill Cart Dimensions:
36"W x 35-5/8"H x 25-1/4"D
Shelf Dimensions:
21"D x 16"W
Cart Accessories
ZX36CVCC Vinyl Cover fits all 36" models installed
on a cart.
23-3/4"
D UA L- B U R N E R
O U T D O O R C O O K TO P
12" Min. to Combustibles
3" Clearance for Lid
40-1/2"
FRONT
IGNITOR
24" OUTDOOR
COOKING CENTER
9-1/8"
35-1/2"
Max.
18-1/2"
10-1/8"
3-1/8"
Opening for
Access Doors
4x4 Opening
for Gas Supply
Line
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
77
27" Outdoor Cooking Centers
General Features
Gourmet Radiant™ trays. Beneath the grill racks, these
uniquely designed trays ensure even heat distribution.
They reduce grease flare-ups, eliminate the need for lava
rocks or briquettes and remove easily for cleanup.
Porcelain-coated cast-iron grill burners.Two 20,000-BTU “H”
burners provide an even intense heat to the entire
grilling area.
Infrared rotisserie system. A ceramic 14,000-BTU infrared
burner, mounted behind the motorized rotisserie, reaches
cooking temperature in just 30 seconds, providing the
intense heat needed for searing meats and poultry.
Slide-out drip tray.The stainless steel drip tray below the
grill burners collects grease and spills and slides out for
easy cleaning.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
78
HOLD 10 SEC. WHILE LIGHTING
HOLD 10 SEC. WHILE LIGHTING
GRILL
ROTISSERIE
GRILL
GRILL
GRILL
ROTESSERIE
GRILL
IGNITOR
IGNITOR
IGNITOR
ROTISSERIE
GRILL
IGNITOR
GRILL
ROTESSERIE
IGNITOR
GRILL
IGNITOR
27" Outdoor
Cooking Center
27" Outdoor
Cooking Center
ZGG27N21CSS (natural gas)
ZGG27N20CSS (natural gas)
ZGG27L21CSS (liquid propane)
ZGG27L20CSS (liquid propane)
Overall Dimensions
(WxHxD in inches):
27 x 24-3/8 x 24-3/4
Approx. Shipping Wt. (lbs.) 135
Overall Dimensions
(WxHxD in inches):
27 x 24-3/8 x 24-3/4
Approx. Shipping Wt. (lbs.) 130
■ Built-In or Portable
■ Natural or LP Gas Must Be
Specified by Model Number
■ Stainless Steel Cart Available
■ Trim Kit Required for Enclosure
■ Insulated Jacket Required
for Combustible Enclosure
■ Conversion Kit Available
■ Built-In or Portable
■ Natural or LP Gas Must Be
Specified by Model Number
■ Stainless Steel Cart Available
■ Trim Kit Required for Enclosure
■ Insulated Jacket Required
for Combustible Enclosure
■ Conversion Kit Available
monogram.com
Additional Clearances
13-7/8"
10-1/2"
16-1/4"
ZGG27N20CSS
2 grill burners,
(Order ZGG27L20CSS
for LP Gas)
22-3/4"
24-3/4"
27"
2"
Cutouts for Built-In Installations
Installation in a non-combustible (masonry) enclosure
The grill drops into the opening. The grill must be
supported by a deck or ledge on each side.
Install Electrical
Outlet for Rotisserie
on Left Side
(6.5 AMP Min.)
27-3/8"
12" Min. to
Combustibles
3" Clearance
for Lid
23"
35-1/2"
Max.
Observe all clearances shown.
• Allow at least 12" clearance on each side to combustible
vertical surfaces and at the rear when exhaust is directed
to a window or a surface that is difficult to clean.
• Allow at least 6" clearance on each side to any noncombustible material located above the cooking surface
for counter space. Rotisserie models also require 6"
clearance for placing and handling the motor and skewer.
36" OUTDOOR
COOKING CENTERS
12" Min. to Combustibles
3" Clearance for Lid
ZGG27N21CSS
2 grill burners,
1 rotisserie burner
(Order ZGG27L21CSS
for LP Gas)
Built-In Accessories
ZX27TKYSS Trim for Built-In Installations
This kit is designed for
both combustible and
non-combustible
enclosures. The trim
conceals the gap at the
rear and sides. (This kit will
not support the weight of the grill.)
ZXADYSS Stainless Steel Double Access Doors
Optional accessory to cover the access opening under
the grill in a built-in installation.
27" OUTDOOR
COOKING CENTERS
27" Product Dimensions
48" OUTDOOR
COOKING CENTERS
Advance Planning for 27" Outdoor Cooking Centers
ZX27CV2Y Vinyl Cover fits all built-in 27" models.
14-1/2"
ZX27CTACSS 27" Grill Cart
This cart has one fold-down shelf. Access to the LP tank
is from the back of the cart.
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
Grill Cart Dimensions:
27"W x 25"H x 22-3/4"D
Installation in a combustible enclosure
ZX27JYSS insulated jacket is required
The insulated jacket must be supported from the bottom
by a solid deck or ledge on each side beneath the jacket.
Construct the enclosure as shown and place the insulated
jacket into the enclosure. Place the cooking center into
the jacket.
33-3/8"
24"
35-1/2"
Max.
14-1/2"
11-1/2"
3-1/8"
4x4 Opening
for Gas Supply
Opening for Line
Access Doors
24" OUTDOOR
COOKING CENTER
Install Electrical
Outlet for Rotisserie
on Left Side
(6.5 AMP Min.)
12" Min. to
Combustibles
3" Clearance
for Lid
Shelf Dimensions:
21"D x 16"W
Cart Accessories
ZX2NYSS, ZX2LYSS Dual Burner Cooktop can be
installed on the right side of a 27" cart.
ZX27CVCC Vinyl Cover fits all 27" models installed
on a cart.
ZX27CVDY Vinyl Cover fits 27" models installed
on a cart with a dual burner cooktop.
D UA L- B U R N E R
O U T D O O R C O O K TO P
4x4 Opening
for Gas Supply
Opening for Line
Access Doors
10-1/2"
ZX27QDC Quick Disconnect Tee for use when installing
a LP Dual Burner Cooktop (ZX2LYSS) with
a 27" LP Outdoor Cooking Center on a cart.
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
79
24" Outdoor Cooking Center
General Features
Stainless steel burners.Two 15,000-BTU burners provide
durability and intense heat to the grilling area.
Built-in rotisserie burner. The rear ceramic briquettes
radiate heat from the rear burner, for rotisserie cooking.
Precision brass valves. Controls are mounted on durable,
brass valves that resist rust and corrosion, ensuring long
life in an outdoor environment.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
24" Outdoor
Cooking Center
ZGG24L20BSS (liquid propane)
Overall Dimensions
(WxHxD in inches):
24 x 18 x 23-3/4
Approx. Shipping Wt. (lbs.) 130
■ Built-In or Portable
■ Requires Conversion Kit
for Natural Gas
■ Stainless Steel Cart Available
■ Trim Kit Required for Enclosure
■ Insulated Jacket Required
for Combustible Enclosure
80
monogram.com
This 24" grill is factory set for liquid propane gas
operation. It can be converted to natural gas operation
with the ZX24NGB kit.
24" Product Dimensions
Additional Clearances
Observe all clearances shown.
• Allow at least 12" clearance on each side to combustible
vertical surfaces and at the rear when exhaust is directed
to a window or a surface that is difficult to clean.
• Allow at least 6" clearance on each side to any noncombustible material located above the cooking surface
for counter space. Rotisserie models also require 6"
clearance for placing and handling the motor and skewer.
24-3/4"
ZGG24L20BSS
2 burners and
rotisserie
48" OUTDOOR
COOKING CENTERS
Advance Planning for 24" Outdoor Cooking Center
9"
Built-In Accessories
24"
18-7/8"
23-3/4"
4-7/8"
Cutouts for Built-In Installations
Installation in a non-combustible (masonry) enclosure
The grill drops into the opening. The grill must be
supported by a deck or ledge on each side.
4" Min. for Lid
24-1/2"
Install Electrical
Outlet for Rotisserie
on Right Side
(6.5 AMP Min.)
ZX24TKBSS Trim for Built-In Installations
This kit is designed for
both combustible and
non-combustible
enclosures. The trim
conceals the gap at the
rear and sides. (This kit will
not support the weight of the grill.)
ZXADYSS Stainless Steel Double Access Doors
Optional accessory to cover the access opening under
the grill in a built-in installation.
27" OUTDOOR
COOKING CENTERS
Allow 4" clearance
for lid at the rear and 12"
clearance to combustibles
at the rear and both sides
19"
36" OUTDOOR
COOKING CENTERS
9"
ZX24CV2B Vinyl Cover fits built-in 24" grill.
ZX24CTBSS 24" Grill Cart
This cart has one fixed shelf. Access to the LP tank is
from the back of the cart.
8"
Opening for
Access Doors
Accessory doors
ZXADYSS cutout:
24-1/8"W x 18-1/4"H
Installation in a combustible enclosure
ZX24JBSS insulated jacket is required
The insulated jacket must be supported from the bottom
by a solid deck or ledge on each side beneath the jacket.
Construct the enclosure as shown and place the insulated
jacket into the enclosure. Place the cooking center into
the jacket.
12" Min. to
Combustibles
4" Min. for Lid
25-3/4"
Grill Cart Dimensions:
23"W x 27"H x 16-1/2"D
24" OUTDOOR
COOKING CENTER
Gas Inlet
Cart Accessories
ZX24CVCB Vinyl Cover fits 24" grill installed on a cart.
Install Electrical
Outlet for Rotisserie
on Right Side
(6.5 AMP Min.)
D UA L- B U R N E R
O U T D O O R C O O K TO P
35-1/2
Max."
19-1/2"
35-1/2
Max."
Gas Inlet
8"
Opening for
Access Doors
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
81
Dual-Bur ner Outdoor Cooktop
General Features
Porcelain-coated cast-iron burners.The spark-ignition
burners are 15,000 BTU-rated, and come with a removable
stainless steel cover that doubles as a work surface. Burners
are baffled to reflect heat into the cooking area.
Precision brass valves. Controls are mounted on durable,
brass valves that resist rust and corrosion, ensuring long
life in an outdoor environment.
Drip pan.The full-width stainless steel pan slides out easily
for removal and cleaning.
Versatile installation.The dual-burner cooktops are
designed to be built in or added to the 27" cart.
For additional details on product installation, warranty
coverage, care and maintenance, visit Monogram.com.
REAR
FRONT
IGNITOR
Dual-Bur ner
Outdoor Cooktop
ZX2NYSS (natural gas)
ZX2LYSS (liquid propane)
Overall Dimensions
(WxHxD in inches):
13 x 10-1/2 x 25-3/4
Approx. Shipping Wt. (lbs.)
56
■ Built-In or Portable
■ Natural or LP Gas Must Be
Specified by Model Number
■ Trim Kit Required for Enclosure
■ Insulated Jacket Required
for Combustible Enclosure
Advance Planning for Dual-Bur ner Outdoor Cooktop
Dual-Burner Outdoor Cooktops are factory set for natural
or liquid propane gas. The correct model should be
ordered for the installation situation.
• The burner can be installed into an enclosure or onto the
27" grill cart. Support brackets for grill cart installation
are provided with each burner.
Product Dimensions
ZX2NYSS
Natural Gas
10-1/2"
ZX2LYSS
LP Gas
23-3/4"
25-3/4"
13"
Installation in a non-combustible
(masonry) enclosure
The burner drops into the
opening. The burner must
be supported by a solid deck.
2x2
Opening
for Gas
Supply
Line
13-1/8"
23-5/8"
10-3/8"
Installation in a combustible enclosure
ZX2JYSS insulated jacket is required
The insulated jacket must be
2x2
supported from the bottom by
Opening
a solid deck or ledge on each
for Gas
Supply
side beneath the jacket.
Line
Construct the enclosure as
1"
shown and place the insulated
jacket into the enclosure.
15-3/8"
24-5/8"
11"
1-1/8"
2"
Accessories
Clearances
When installed on the side of a 27" cart, allow at least 6"
clearance at the rear and right side to vertical combustible
materials.
• When installed in an enclosure, allow 6" clearance at the
rear and both sides to vertical combustible materials.
• When installed into a combustible enclosure, the cooking
surface should be 1" above adjacent horizontal surfaces
and 35-1/2" above the floor.
82
ZX2TKYSS Trim Kit
For combustible and non-combustible enclosures. The
trim will conceal the gap at the rear and sides of the
opening. The cooktop should be installed at least 35-1/2"
above the floor.
ZX27QDC Quick Disconnect Tee for use when installing a
LP Dual-Burner Cooktop (ZX2LYSS) with a 27" LP Outdoor
Cooking Center on a cart.
monogram.com
Notations
83
Exceptional service is a Monogram standard.
Monogram® offers a feature no other brand can match: customized services that
begin before you’ve selected your appliances and continue until well after your
Monogram home has become a reality. The Monogram Collection™, a superb line
of kitchen appliances with a package of services to match.
Visit Monogram.com. Find Monogram product information, specifications,
installation instructions and owner's manuals. Also, schedule services and order
parts online, anytime.
GE QuickSpecs, 800.432.3729. Request dimensions and specifications on any
Monogram appliance and have the data transmitted, within minutes, to the fax
number you provide.
Monogram Preferred Service, 800.444.1845. If your Monogram appliance should
ever require service, you can depend on Monogram Preferred Service. Simply
call the above number 8 a.m. - 8 p.m. EST, Monday through Friday, to schedule
your service appointment.
GE Answer Center®, 800.626.2000. For product assistance and answers to your
questions about Monogram appliances anytime.
GE Consumer Products
General Electric Company
Louisville, Kentucky 40225
ENERGY STAR ®. Before purchasing an ENERGY STAR-qualified appliance, read
important information about its estimated annual energy consumption or energy
efficiency rating that is available from your retailer or at GEAppliances.com.
All Monogram products are appropriately UL or AGA approved.
Product improvement is a continuing endeavor at General Electric. Therefore, materials,
appearance and specifications are subject to change without notice.
© 2003 General Electric Company
Publication Number 24-M353-1
PC35249
Download PDF