US Water Systems | ECS-39 | Specifications | US Water Systems ECS-39 Specifications

The
Future
is Here!
PRODUCT CATALOG
Water Conditioning Products
For the Plumbing Professional
TABLE OF CONTENTS
4 -11
About WaterGroup
12 - 19
Water Conditioning Basics
20 - 45
Water Softeners & Filters
46 - 57
58 - 74
75 - 85
86 - 104
105 -109
Aqua Flo and Aqua Flo Platinum
Drinking Water Systems
PURA Ultraviolet Disinfection
Systems
Aqua Flo Point-of-Use Filtration
Products
Accessories
Chemical Feed Pumps
Pro Chemicals
Test Kits
Mazzei Injectors
John Guest Fittings
Water Conditioning Glossary
26
Fe
iron
55.85
3
Welcome To WaterGroup
I first started in the water conditioning industry in 1968 with a focus
on growing and supporting the sale of water conditioning products
through the Plumbing Trade.
Industry Leaders in Customer Service
We are the fastest growing, most innovative manufacturer of high-quality
water conditioning products in the world! No one is doing what we are!
1000+ Years of Industry Experience
Today our mission is the same – to provide plumbers and our wholesale
partners with more value, features and support –
constantly raising the bar and surpassing expectations!
Value-Added Support From The Industry Experts
g Our Regional Sales Managers are in the field
learning your business, understanding your needs and helping you grow! We have 35 RSM’s with 700+ years of experience!
When it comes to residential & commercial water treatment no one
knows the industry better. Our Sales & Customer Service Team has more
direct experience than any in the industry allowing them to offer you
‘best in class’ support.
g Our Customer Service Team provides best-in-class
technical support. Our 10 CSR’s have over 200+ years of experience!
We are committed to leading change bringing you modern designs,
new features, great performance and unparalleled quality.
g Our Dedicated Commercial Engineering Division has the best Professional Engineers and
Technologists with over 125+ years of combined
experience
Let us show you the difference WaterGroup can make!
“We believe that investment in
products, a detailed focus on quality and recognizing the value of our
people is the right foundation for the
future”
Don Fettes, President
Don’t Let Your Customers
Spend Good Money For Bad Results…
Money Leaking Down The Drain?
Chlorine is a strong oxidant that quickly destroys rubber seals & gaskets in
appliances and plumbing fixtures causing leaks. Chloramines attack pipes causing
pinhole leaks in plumbing.
A WaterGroup 185 Whole-House Carbon Filter protects plumbing and your
customers from unwanted chlorine & chloramines.
Hard Water Damage?
Hard water scale and curd will damage pipes, fixtures, water
using appliances, water heaters, clothing, dishes, hair & skin.
A WG185UF High-Efficiency Water Softener
is an affordable solution!
0 Expert Technical Support
0 Water Testing
0 Product Selection & Sizing
Dean Dalrymple
Customer Service
Manager
0 Order Placement
…Fix The Water That Broke It!
0 Troubleshooting
0 Specialized Commercial Engineering
4
About WaterGroup
Dave Pitman
Commercial Engineering
Manager
About WaterGroup
5
Water Testing Services
Operations & Product Development
Recommending a proper solution starts with a water
analysis. labs in Regina, Cambridge, Carmel, IN &
Golden Valley can test your water samples for:
1) Hardness
4) pH
2) Iron
5) Tannins
3) Manganese
6) TDS
Toby Hughes has managed some of the industries largest water conditioning manufacturing operations as well as toured the facilities of
most industry manufacturers across the globe.
Toby brings almost 20 years of extensive industry experience to
WaterGroup. Toby has managed product development as well as
implemented Lean manufacturing, Continuous Improvement and
Quality Assurance programs, MRP (Material Requirement Planning)
systems to create an efficient, low cost and quality driven manufacturing environment.
Toby Hughes P. Eng.
Chief Operations Officer
“The WaterGroup Product Development Center and
manufacturing operations are beyond comparison in
our industry. The investment in technology and commitment to leading manufacturing practices & innovation
has resulted in higher quality and lower cost products
with meaningful ‘Installer / Service Driven’ features. This
all adds up to better value for our customers.
Water Testing Kits & Sample Bottles
WaterGroup sells a complete line of easy to use test
kits so you can accurately test water in the field.
Not sure of the proper product application?
Give us a call with the results and we’ll provide
you with a product recommendation.
Water Sample Collection Kits are available at
Stocking Wholesalers & include a sample bottle,
mailing tube and sample collection instructions.
My staff of 17 Professional Engineers, including 3 PhD’s and 2 Masters, are
some of the brightest minds in the industry. I am excited to lead
WaterGroup’s Global Engineering and Operations and raise the bar beyond industry standards and our customers expectations.”
Toby Hughes, P.Eng., Chief Operations Officer
If you have concerns about the safety (potability) of the
water supply we recommend a complete water analysis be
conducted. These are usually conducted for a small fee at a
State or Provincial Lab.
6
About WaterGroup
About WaterGroup
7
Control Valves
Fiberglass Tanks
WaterGroup NSF/ANSI 44 Certified control valves meet or exceed
the most vigorous industry performance and reliability standards.
Familiar piston, seal and spacer design has been enhanced to
improve performance and product life.
WaterGroup NSF/ANSI 44 Certified filament wound tanks
are not only strong and reliable but the finish is unparalleled in the industry. No need for a tank jacket (although we offer those too) with the neatly wound, high
gloss finish. Strict tank height control measures mean no
surprises when installing a duplex system.
The addition of a piston stabilizer reduces the side load force
between the piston rod and end plug seal as it firmly guides the
piston while it travels up and down. An added rib on the seal
improves the sealing pressure so that the valve can withstand
over 700psi! These are just a few of the design features that make
Novo valves more reliable and and better performing. Learn
more about the ‘Dealer-driven’ control valve design
features on page 15.
WaterGroup NSF/ANSI 44 Certified control valves meet or exceed
competitive equivalents in all four key measures:
1) Service Flow Rate, 2) Back Wash Flow Rate, 3) Burst
Pressure and 4) Cycle Testing.
8
About WaterGroup
Added Rib Improves Seal
The tanks are made in the World’s first and only fully
automated, robotic manufacturing process.
Watch the video >>
www.canaturena.com/tanks-video.asp
Piston Stabilizer
About WaterGroup
9
Assembly, Testing & Distribution
All water softeners and whole-house filters are engineered,
assembled, tested and and distributed from our North
American Regional facilities. All control valves are 100% wet
tested and air tested before leaving the factory. Control valves
are then set up to engineering specifications for the particular
unit, air tested a second time and then assembled into the
finished product. All assembled products are packaged in
durable, double walled high impact cardboard to ensure
products arrive undamaged.
Quality Assurance Department
WaterGroup employs a strict and formalized quality control
program. The 925,000 sq. ft. Shanghai Manufacturing facility is ISO9001:2008 Quality Assurance and ISO 14001:2004
Environmental Management Systems standards certified.
Quality Control systems:
0 Document Management
0 Receiving Inspection
0 In-process Quality Control
0 Final Inspection
0 Engineering Change Orders
0 First Piece & Production Part Approval
0 Test Equipment Calibration
0 Statistical Process Control
0 Vendor Quality Management
Kyle Stange shrink wrapping shipment in Golden
Valley, MN
0 Customer Feedback System
World Class Testing Laboratory
0 Burst Testing: High pressure testing of tanks and valves to determine the maximum burst strength.
0 Cycle Pressure Testing: High pressure cycling testing to simulate the fatigue
strength of the tanks and valves over their life.
0 Flow Bench: Precisely measure flow rates and pressure drops.
0 Reliability Testing: Continuously cycling the valve through regeneration while
taking flow measurements and counting the number of cycles.
0 Computer Aided Optical Comparator: Mike Cummings assembling a softener
in Regina, SK facility
Used for precise measurement of very small details such as fillets or radius’s.
0 Coordinate Measuring Machine (Cmm): Used for precise geometrical x, y, and z measurement coordinates.
0 3d Prototype Printer: Makes 3D models for rapid prototyping.
0 Chemical Analysis Laboratory:
10
About WaterGroup
Complete chemical analysis of raw
materials including metals, plastics and media to ensure quality and integrity.
About WaterGroup
11
The Hydrologic Cycle
Characteristics of Various Water Sources
Rain Water
After the water picks up impurities in the atmosphere
and percolates through the ground, it comes into
contact with carbon dioxide and then forms carbonic
acid. This dissolves some of the mineral content of the
soil or rock it contacts, thus adding these minerals to
the water.
Surface Water
Water
Conditioning
Basics
The total area of the earth is composed of 2/3 water,
making it one of the most plentiful and most important
materials available. Without potable water, mankind
cannot survive.
Pure water consists of two parts hydrogen and one part
oxygen, chemically combined to form pure water.
The only pure source of water is the earth’s atmosphere
(sometimes called the hydrological cycle). Impure water
from the earth’s oceans, lakes, rivers and surface evaporates into the atmosphere, then condenses to form
rain droplets which are totally pure. The above process
operates basically the same as a man-made still, which
evaporates all the impurities from the water, then returns
the condensates into pure water. If this process did not
exist, there would likely not be enough potable water to
support the earth’s population.
“The only pure
source of water
is the earth’s
atmosphere.”
The Hydrologic Cycle
Guidelines for Solving
Water Problems,Terminology,
Water Analysis,
Sizing Parameters
12
The pure water vapor, which forms in the earth’s
atmosphere (clouds), begins to pick up impurities. As
it begins to fall to earth in the form of rain, snow, etc.,
impurities are immediately absorbed. These impurities
may be dust, micro-organisms, gases, etc. - at least a
little of everything found in the atmosphere on the way
to the surface.
Water from streams may be turbid due to the presence
of silt, clay, etc. However, in larger surface water, a
greater amount of self-purification takes place through
aerobic digestion, plant life, fish, etc. and the quality of
the water could change to a great degree.
Ground Water
Normally picks up the minerals it flows through. As a
general rule, water from deep wells contains a higher
mineral content and is less likely to contain organics or
turbidity. Water from shallow wells is usually lower in
mineral content and may be subjected to pollution or
other bacteria which is available from various sources
nearby (e.g. spring run-off through forests and hills,
plants, industrial wastes, etc. which will all pass various
bacteria into the water).
Impurities
Impurities in water are divided into two classifications:
1. Dissolved Solids
Those which naturally dissolve into water. NOTE:
Gases may also dissolve into water unless they
combine chemically with other impurities. They will
be released into the atmosphere upon boiling and
are not truly classified as dissolved solids. Upon
evaporation, only the dissolved solids would remain
in the actual mineral form and then can be analyzed
by actual weight of the various elements.
2. Suspended Solids
Consist of clay, mud, silt, etc. and will not dissolve
into water naturally but remain as such in their
present state.
Water treatment and pollution control is one of the
largest and most important industries in the modern day
world. As can be seen from the preceding information,
water treatment is a very broad and varied field and
chemical analysis of certain water supplies is virtually
impossible to completely break down. In time, modern
man may discover additional information regarding
the field of water treatment and the entire cycle of the
earth’s largest and most important single resource.
The following sections will attempt to clarify some of
the more common problems and solutions presently
available.
The rain or snowfall finds its way to various sources of
water supplies on the earth’s lakes, rivers, oceans or
it may soak into the ground and become a part of an
underground stream or lake.
Water Conditioning Basics
13
CAUSE
CORRECTIVE EQUIPMENT
Hard Water
Spotting on dishes and glassware; scale
on inside of water heater, pipes and
water-using appliances; soap curd and
bathtub ring; clothes look gray and dingy.
Calcium and magnesium in
water, measuring 1.0 gpg
or more.
Water Softener
(Max. Hardness 100 gpg)
(Max. Clear Water Iron 1.5 ppm)
Yellow, brown or rusty stains on plumbing fixtures, water-using appliances and
fabrics; metallic taste in foods and beverages; water is clear when drawn from the
faucet but oxidizes when exposed to air,
then changes color ranging from yellow
to brown.
Iron in the water measuring
0.3 ppm or more.
0.3-1.5 ppm Water Softener.
1.5-7.5 ppm SIM Specialty System
Softener. 1.5-30 ppm Chemical Free
Iron Filter (Note 1).
Same symptoms as Clear Water Iron
but iron has already oxidized and has a
yellow to rust color when drawn from the
faucet.
Iron in the water measuring
0.3 ppm or more.
Same symptoms as Clear & Red Water
Iron but can have clumps or balls that
may foul plumbing lines and other
water-using appliances; particularly
noticeable as a yellow to reddish slime in
toilet flush tanks.
Iron bacteria are a group of
bacteria which thrive in
ironbearing water, utilizing
iron as an energy source.
This bacteria is not a health
hazard.
Chemical Free Iron Filter
(Note 1). Chemical feed pump
feeding chlorine followed by a
Multimedia Filter (Note 3).
Blackish stain on fixtures and laundry;
manganese content above 0.05 ppm
causes stains.
Interaction of carbon dioxide
or organic matter with manganesebearing soils. Usually
found in combination with
iron.
0.05-1.0 ppm Chemical Free M Iron
Filter (Note 1). 1.0-2.0 ppm Neutralizing Filter followed by Iron & Sulfur
Filter (Note 2).
Blue/green or rusty stains and corrosion
of plumbing fixtures and other water-using appliances; pitting of porcelain and
enamel fixtures and dishes. Pin holes in
copper plumbing lines.
Generally associated with
water with a pH value of less
than the neutral 7.0.
pH 6.0-6.9 Neutralizing Filter.
pH 4.0-6.9 Chemical Feed Pump
feeding soda ash. Consult our Customer Service Dept.
Same symptoms as Acid Water but pH is
7.0 or higher.
Alkalinity and carbon dioxide
or high dissolved oxygen in
water. Electrolysis - two dissimilar metals in plumbing
lines.
Consult our Customer Service Dept.
Hydrogen sulfide is a
dissolved gas found in some
water supplies.
0.1-3.0 ppm Chemical Free Iron
Filter or Iron & Sulfur Filter.
3.0-15 ppm Chemical Feed Pump
feeding chlorine followed by a
Multimedia Filter (Note 3).
Clear Water Iron
(Ferrous)
Red Water Iron
(Ferric)
Bacterial Iron
Manganese
Acid Water
Aggressive/Corrosive
Water
Hydrogen Sulfide
Rotten egg taste and/or odor. Turns copper plumbing lines black. Very corrosive.
0.3-30 ppm Chemical Free Iron
Filter ( Note 1).
0.3-10 ppm Iron & Sulfur Filter.
Marshy, metallic or
chlorine taste and/or
odors
Objectionable tastes and/or odors other
than hydrogen sulfide.
Dissolved minerals or gases;
organic contamination or
chlorination.
Activated Carbon Filter for whole
house water supply or Taste &
Odor Cartridge Filter for individual
faucets.
Turbidity (Sand/
Sediment)
Foreign particles, dirty or cloudy water.
Tiny suspended particles
that are the result of water
main scale or silt. Private
wells often contain sand or
clay.
Multimedia Filter for whole house
water supply or a Sediment Cartridge Filter for individual faucets.
Tannins
Yellow or brown tint or cast in water supply; tannins measuring 0.5 ppm or higher
may cause staining and/or interference
with various water treatment processes.
Result of decaying vegetative matter.
Organic Color Removal Filter.
Consult our Customer Service Dept.
Grains per Gallon - gpg
pH
1/7000 of a pound - normally used in relation to
hardness.
pH is a measure of the intensity of the acidity or
alkalinity of water on a scale from 0 to 14, with 7 being
neutral. When acidity is increased, the hydrogen ion
concentration increases, resulting in a lower pH value.
Similarly, when alkalinity is increased, the hydrogen ion
concentration decreases, resulting in higher pH.
Parts per Million - ppm
One part dissolved material in one million parts of water.
Used as a measurement for iron, manganese, TDS, hydrogen sulfide, chlorides, sulfates and tannins.
Milligrams per Liter - mg/l
For our purpose, same as ppm. Normally used for a more
accurate measurement or where small quantities of
certain elements cause big problems in relation to iron,
manganese, sulfur, nitrates and silica.
The pH value is an exponential function so that pH 10
is 10 times more alkaline than pH 9 and 100 times more
alkaline than pH 8. Similarly, a pH 4 is 100 times more
acid than pH 7.
pH Scale
Converting gpg to ppm or mg/l
1 gpg = 17.1 ppm (mg/l)
Total Dissolved Solids - TDS
The weight of solids, per unit volume of water, which are
in true solution. Can be determined by the evaporation
of a measured volume of filtered water and determination of the residue weight. A common alternative
method to determine TDS is to measure the conductivity
of water.
Extremely Alkaline
Extremely Alkaline
Extremely Alkaline
Strongly Alkaline
Moderately Alkaline
Slightly Alkaline
Neutral
Slightly Acid
Hardness
A characteristic of natural water due to the
presence of dissolved calcium and magnesium.
Water hardness is responsible for most scale
formation in pipes and water heaters and forms
insoluble “curd” when it reacts with soaps.
Hardness is usually expressed in grains per gallon
(gpg), parts per million (ppm) or milligrams per
liter (mg/l), all as calcium carbonate equivalent.
Ferric Iron
Iron that is oxidized in water and is visible. Also called red
water iron.
Moderately Acid
Strongly Acid
Extremely Acid
Extremely Acid
Excessively Acid
Very Extremely Acid
14.0
13.0
12.0
11.0
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Household Lye
Bleach
Ammonia
Milk of Magnesia
Borax
Baking Soda
Sea Water
Blood
Dislled Water
Milk
Corn
Boric Acid
Orange Juice
Vinegar
Lemon Juice
Baery Acid
INCREASING ALKALINITY
SYMPTOM
NEUTRAL
PROBLEM
Terminology
INCREASING ACIDITY
Guidelines for Solving Water Problems
Note: A complete glossary can be found in the
Water Conditioning Glossary section.
Ferrous Iron
Iron that is dissolved in water. Also called clear water
iron.
Note 1 - Water must have a minimum pressure of 20 psi, pumping rate of 5 gpm and a pH of 6.5 or higher for proper operation. Most water
supplies contain calcium and magnesium which are not removed by an iron filter. We recommend following an iron filter with a water softener.
Note 2 - Oxidation of manganese is more pH dependent than iron. Therefore a pH of 8.2 or higher must be maintained. If the manganese level is
>2.0 ppm or bacterial iron is present, consult our Customer Service Department.
Note 3 - This system also requires a retention tank to allow adequate contact time (minimum 20 minutes). An optional activated carbon filter for
the whole house water supply or a taste & odor cartridge filter for individual faucets may be installed to remove any objectionable taste or odor.
14
Water Conditioning Basics
Water Conditioning Basics
15
Water Analysis
For correct sizing and application of water conditioning
equipment, a water analysis is required. A basic water
analysis includes tests for the following:
• Hardness
• Iron
• Manganese
• pH
• TDS (Total Dissolved Solids)
Water samples should be taken as near the source as
possible and represent the average water condition.
Clean containers must be used. When performing the
analysis, the test equipment must be clean and rinsed
with the test water and the test water should be
between 68°F and 77°F (20°C and 25°C). Use rubber
stops as supplied. Do not use your fingers as contaminants and acids could affect test results.
Additional tests can be performed for tannins and hydrogen sulfide (H2S). The test for H2S must be performed
on-site for accurate results. Special tests can be performed for chlorides,
sulfates and alkalinity by specified laboratories. If it is suspected the water supply is contaminated with coliform
bacteria or nitrates, a sample must be collected in an
approved sterilized container and submitted to a government approved laboratory. Iron bacteria will not be
detected with the standard iron test and can be tested
for by a government approved laboratory.
Water with a total hardness of 1.0 gpg or more as calcium carbonate equivalent.
NOTE: Please answer ALL appropriate questions to ensure accurate equipment recommendations
Less than 1.0 gpg ............ Soft
1.0 - 3.5 gpg .................... Slightly hard
3.5 - 7.0 gpg .................... Moderately hard
7.0 - 10.5 gpg .................. Hard
More than 10.5 gpg ......... Very hard
Hardness
A characteristic of natural water due to the presence
of dissolved calcium and magnesium. Water hardness is
responsible for most scale formation in pipes and water
heaters and forms insoluble “curd” when it reacts with
soaps. Hardness is usually expressed in grains per gallon
(gpg), parts per million (ppm) or milligrams per
liter (mg/l) all as calcium carbonate equivalent.
Date Completed _____________________
DEALER
DISTRIBUTOR
_______________________________________
Name
_______________________________________
Name
_______________________________________
Name
_______________________________________
Street
_______________________________________
Street
_______________________________________
Street
_______________________________________
Town
State/Province
_______________________________________
Town
State/Province
_______________________________________
Town
State/Province
_______________________________________
Zip Code/P.C.
Email
_______________________________________
Zip Code/P.C.
Email
_______________________________________
Zip Code/P.C.
Email
_______________________________________
Phone
Fax
_______________________________________
Phone
Fax
_______________________________________
Phone
Fax
HOW TO DRAW WATER SAMPLE
Use outlet nearest pump (not from bottom of pressure tank).
Run water for five minutes or two pump cycles, then fill clean
bottle to neck and cap immediately. Never use hot water.
Return bottle with this completed form.
Softened Water
HOW TO MEASURE PUMPING RATE OF PUMP
1. Make certain no water is being drawn. Open spigot nearest
pressure tank. When pump starts, close tap and measure
time (in seconds) to refill pressure tank. This is cycle time.
2. Using a container of known volume, draw water and
measure volume in gallons until pump starts again. This is
drawdown.
3. Divide drawdown by cycle time and multiply the result by 60
to arrive at the pumping rate in gallons per minute. Insert
this figure in #3 Water System.
Any water which contains less than 1.0 gpg (17.1 mg/l)
of hardness minerals, expressed as calcium carbonate
equivalent.
Any water that is treated to reduce hardness minerals,
expressed as calcium carbonate equivalent.
O
H
26
Fe
iron
55.85
Water Conditioning Basics
Report No. _________________________
CUSTOMER
Soft Water
If a contaminant exceeds the limits detectable by any
test method, the raw water sample can be diluted with
distilled water until a reading can be taken. A calculation must then be performed to determine the actual
degree of contamination. All test chemicals are subject
to age and extreme temperatures. Proper storage techniques and expiry dates should be observed.
16
Date Received ______________________
Bacterial analysis must be performed by your local health department.
If the TDS is over 1000 ppm and hardness is less than 30%
of the TDS, a complete water analysis should be performed to discover what other contaminants exist in the
water.
The Water Analysis Report shown on the next two pages
must be completed accurately to determine the correct equipment to recommend for the water problem(s)
being experienced.
Water
Analysis Report
Report
Water
Analysis
Hard Water
FOR LABORATORY USE ONLY
H
H2O
1. Water Source
o City or area-wide authority
o Community water system (small water system usually
supplying 12 homes or fewer)
Water comes from:
o Well o Lake o Reservoir o River o Unknown
o New private well - Approx age
months
o Old private well - Approx age
months
o Private lake o Private spring o Private dugout
o Private cistern o Other - describe
2. Household Information
Do you now have water conditioning equipment?
o No o Yes
Type
Size
o Single family o Multi-family No. of units ______________
No. persons
No. baths
o Lawn irrigation on water system?
o Indoor pool o Outdoor pool - Capacity
gallons
Water line size from source inches
3. Water System
Type of Pump
o Constant Pressure o Jet o Submersible o Unknown
Pumping rate of pump
gpm
Pressure Tank
o Air to water o Bladder Capacity
gallons
Operating pressure (low/high)
/
psi
4. Water Problems
When this sample was drawn, it was:
o Clear o Colored o Cloudy
This water sample is o Untreated o Treated
How is it treated?
PROBLEMS
o Hardness (e.g. high soap usage, bathtub ring, lime deposits,
etc.)
o Iron Deposits - if so, is iron build-up in flush tank?
o Greasy o Gritty o Stringy (iron bacteria?)
Color of Water - o Red o Orange o Black
o Greenish or blue stains on sinks, tubs, etc.
o Pitting of fixtures and/or pipes
o Sand (visible particles) o Sediment or silt (cloudy)
Bad Taste o Iron o Bitter o Salty
Other - describe
Bad Odor o Rotten Egg o Musty o Iron
Odor is in o Cold Water o Hot Water o Both
Other Problems - describe
8
Water Conditioning Basics
17
5. Standard Laboratory Tests
Total Hardness
____________
Iron
____________
Manganese
____________
pH
____________
Total Dissolved Solids
____________
gpg
mg/l
mg/l
mg/l
6. Other Tests
Hydrogen Sulfide
____________ mg/l
(test must be performed on-site)
Tannins
____________ mg/l
7. Special Laboratory Tests
Chlorides
Sulfates
Alkalinity
____________ mg/l
____________ mg/l
____________ mg/l
If TDS is over 1000 ppm and hardness is less than
30% of the TDS, a total water analysis is required.
8. Explanation of Water Analysis
A. Total Hardness
This indicates the efficiency or workability of the water
for everyday household use. Water in excess of 3 gpg
is generally considered hard and should be softened.
B. Iron
Over 0.3 ppm of iron will cause discoloration of water
and staining. Fully automatic water conditioners will
correct this problem. Some extreme water situations
may require filtration.
C. Manganese
Manganese is frequently encountered in iron-bearing
water but to a lesser degree. Manganese is similar
to iron in that it stains and clogs pipes and valves.
Concentrations as low as 0.05 mg/l of manganese can
cause problems.
D. pH
A scale used to measure the acidity or alkalinity of
water. A pH reading below 6.5 normally indicates
highly corrosive water and neutralizing equipment
should be used. A pH reading in excess of 8.5 could
indicate contaminated water and generally requires
bacteriological and chemical analysis.
E. Hydrogen Sulfide (H S)
Testing for hydrogen sulfide should occur on-site.
Hydrogen sulfide imparts a rotten egg odor and taste
that makes water all but undrinkable and also promotes
corrosion. In addition, it can foul the resin bed of a
water conditioner. The use of a water conditioner is not
recommended unless the water is first treated for the
removal of hydrogen sulfide.
2
F. Total Dissolved Solids (TDS)
A measure of the soluble solids present in the water.
G. Tannins
Tannic acid is formed by decaying organic matter.
Tannins alone are not harmful, although they can
affect the proper operation of a chemical free iron filter.
H. Chlorides
Over 500 ppm may impart a salty taste to water.
Sizing Parameters
Water Softener Sizing is Based On
The three day sizing method is used for the
0 60 gallons per person per day - total
household use
0 Three day minimum between regenerations
0 Capacity between regenerations at factory
salt settings or K label capacity
0 Number of people x 60 gallons per person x
gpg of hardness x 3 days = capacity required
between regenerations
0 Consult your factory representative for water
that is 75 gpg or harder
Water Softener/Iron Removal
Combination Units
0 his unit should be recommended only when
dictated by special circumstances or the needs
of the customer.
I. Sulfates
Over 500 ppm may impart a bitter taste to water and
have a slight laxative effect.
0 The customer should be made aware that a
J. Alkalinity
Caused by the presence of bicarbonates, carbonates
and hydroxides. Over 500 ppm creates a “soda” taste
and makes skin dry.
0 When recommending a combination unit, follow
separate iron filter and softener is preferred
because it is a more efficient way to deal with
the water.
the guidelines provided in the specifications.
Water Consumption for
Regeneration
The volume of water used during the regeneration
process of a water softener will vary depending on:
Recommendations
0 Amount and type of resin
Recommendations are based entirely on the information supplied and the water sample chemistry results at the time
of analysis.
0 Cycle time settings
0 Flow controllers
0 Salt settings
0 Tank diameter
Recommended by ____________________________________
Three Day Sizing Method
following reasons:
1. To determine the size of the water conditioner to be used
2. To allow for reserve capacity between regenerations so the customer does not run out of soft water
3. To provide the most economical operation cost
Conversion Factors & Compensated
Iron & Manganese
Total Hardness converted from ppm or mg/l to
Grains/US Gallon (gpg)
ppm (mg/l) ÷ 17.1 = gpg
If there is a small amount of Iron or Manganese
in the water, add the following compensated values:
Iron - ppm x 4
Manganese - ppm x 8
To arrive at the additional compensated load on the
softener
The Total Equivalent Iron for the softener to remove
should not be greater than 1.5 ppm. Total Equivalent
Iron is calculated as follows:
Iron ppm + 2 x Manganese ppm < 1.5 ppm
If the Total Equivalent Iron is less than 0.5 ppm, a Res-Up
Feeder and Pro ResCare can be added as an optional
safeguard against fouling or the bed can be cleaned
occasionally by adding a small amount to the brine
tank manually.
If the Total Equivalent Iron is 0.5 - 1.5 ppm, the
softener can be sized accordingly but a Res-Up Feeder
and Pro ResCare is required in addition to the softener to
prevent iron fouling of the resin.
If the Total Equivalent Iron is greater than 1.5 ppm, an
Iron Filter is required as pretreatment prior to the softener.
Generally, water usage for regeneration is based on
the cubic feet of resin per water softener from a low of
30 gallons of water per cubic foot, up to a normal of 75
gallons of water per cubic foot, to a maximum of 100
gallons of water per cubic foot. Manufacturing specs
and settings for each model size should be checked to
verify exact amounts.
Return completed form to:
Date _______________________________________________
9
18
Water Conditioning Basics
Water Conditioning Basics
19
Unique Features Designed with the
Plumber in Mind
Quick Connect Features for
Ultimate Convenience
The quick connect bypass comes with both 3/4” 90 degree elbows
and 1” straight NPT adaptors. Optional quick connect adaptors include 3/4” straight SharkBite and 3/4” NPT adaptors.
All units include pre-installed bypass
Softeners, Filters
& Specialty Systems
20
Standard QC Fittings
Optional Fittings
¾” FiP x ¾” Jg Flex Connector 18” (item # 80127757)
Simply push to connect on to any 3/4” copper, CPVC or PEX piping
with no tools!! Brought to you by a collaboration between Falcon
Stainless and John Guest USA. Eliminates the need for expensive brass
compression fittings or copper male adaptors.
Water Softeners & Filters
21
Space Saving Improved Design
Heavy Duty Packaging
Eliminate 4” and unnecessary connections for neat, quick installations. Bypass with integrated meter avoids ‘meter jamming’ which
is caused from weight of pipes creating torque on turbines causing
them to bind and stop metering.
WaterGroup uses only durable double-walled high impact cardboard with carrying straps to ensure you do not have to deal
with the headache of receiving damaged products.
“Our focus is to build the
highest quality water
conditioning products in the
industry… so when it comes
to protecting them from
damage during shipping &
handling we don’t ‘cheap
out’”
Toby Hughes, P.Eng
Chief operations officer
5 inches
integrated meter in bypass
1 Connection Comes pre-installed
Competitive Valve
Water Softener Sizing Guide
QC Power Cable
0 Simplifies installation or removal
of the valve from the tank
0 No tangled or wrapped up
power cords!
9 inches
3 Connections
Choosing the Right Size Softener
Total Hardness (Grains per Gallon)
# of People
10
15
20
25
30
40
50
60
70
75
1
WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 32 EF 30 WG185 32 EF 30
2
WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 30 WG185 32 EF 30 WG185 32 EF 40 WG185 40 EF 60
3
WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 32 EF 30 WG185 40 EF 60 WG185 60 EF 60 WG185 60 EF 60 WG185 60 EF 60
4
WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 20 WG185 24 EF 30 WG185 32 EF 30 WG185 40 EF 60 WG185 60 EF 60 WG185 60 EF 90 WG185 90 EF 90 WG185 90 EF 90
5
WG185 24 EF 20 WG185 24 EF 20 WG185 32 EF 30 WG185 32 EF 40 WG185 40 EF 60 WG185 60 EF 60 WG185 60 EF 90 WG185 90 EF 90 WG185 90 EF 90
6
WG185 24 EF 20 WG185 24 EF 30 WG185 32 EF 40 WG185 40 EF 60 WG185 60 EF 60 WG185 60 EF 90 WG185 90 EF 90
bridging
7
WG185 24 EF 20 WG185 24 EF 30 WG185 40 EF 40 WG185 60 EF 60 WG185 60 EF 60 WG185 60 EF 90
WG185 90
WG185HEDP100 WG185HEDP100 WG185HEDP125
0 Solvent free distributor tube with
8
WG185 24 EF 20 WG185 32 EF 30 WG185 40 EF 60 WG185 60 EF 60 WG185 60 EF 60 WG185 90 EF 90
WG185 90
WG185HEDP100 WG185HEDP125 WG185HEDP125
9
WG185 24 EF 30 WG185 40 EF 40 WG185 60 EF 60 WG185 60 EF 60 WG185 90 EF 90
10
WG185 32 EF 30 WG185 40 EF 60 WG185 60 EF 60 WG185 60 EF 90 WG185 90 EF 90 WG185HEDP100 WG185HEDP100 WG185HEDP125 WG185HEDP125 WG185HEDP125
High Quality Brine
Components
0 Closed bottom brine well reduced intrusion of unwanted impurities
0 Injection molded brine grids reduce spun weld collector avoids glue and solvents
0 Injection molded reliable brine valve
WG185 90
WG185 90
WG185 90
WG185HEDP100 WG185HEDP100
WG185HEDP100 WG185HEDP125 WG185HEDP125 WG185HEDP125
Notes: We recommend contacting Novo Water Customer Service for any hardness levels above 75 gpg for proper recommendations
NVO165-N/A models indicate the equivelent 465 model should be used in that application
Cabinet models are available for all 75 and 100 models
22
Water Softeners & Filters
Water Softeners & Filters
23
WG185UF Series Water Softener
WG185UF: High-Efficiency
Performance for the Lowest
Salt & Water Usage Ever!
High Performance Features:
Features:
Reverse Flow Regeneration
with Precision Brining
0 Exclusive WG 185UF NSF Certified electronic control valve with reliable piston, seal and spacer
technology
Traditional ‘downflow’ softeners deplete the unused
portion of the resin bed with every regeneration. It
is like draining the gas tank inyour car every time
before filling it up!
0 Cabinet or Twin Tank models
0 User-friendly backlit LCD display
0 “No Touch” information display rotates key info like last regeneration date and volume remaining
E
F
‘Reverse Flow Regen’ - drives the hardness minerals up through
the already depleted resin and out to drain - saving both salt
and the unused portion of the resin for future use.
0 48 hour memory back-up
0 Meter Immediate, Meter Delayed, Meter Overide,
and Calendar Clock mode
Precision Brining - saves additional salt
by pre-making only 70% of the brine. Just
before regeneration, the computer
calculates the precise amount of brine top-up needed to regenerate only the depleted resin saving up to 30% more salt!
0 Adjustable cycle times
0 Brine safety valve provides extra overflow
protection
turbine meter and sample ports on the inlet.
One-piece design avoids meter jamming.
Estimated Annual Back Wash
Water Usage
0 Time saving quick connect fittings on bypass, drain
and brine line. Power cord even has quick connect for easy valve spin on.
0 Drain line o-ring eliminates need for Teflon
0 Condensation tank jacket (twin tank models)
0 Hose clamp and 10’ of drain tubing included
0 WQA Tested & Certified to NSF/ANSI 44 for effective r eduction of hardness as verified and substantiated by test data.
3,000
2,500
gMunicipal Backwash
Cycle Preset reduces back wash frequency for
clean water supplies
2,000
g Sanitary System Flush
flushes stagnant water after 7 days of non-use
preventing bacteria growth
Gallons
Uses 75% Less Salt
67% Less Water*
0 Unique bypass with an integrated space saving
g Soft Water Quick Charge Mode ensures soft water during unusually heavy water usage
1,500
SAVES UP TO
2000 GALLONS
1,000
g Soft Water Brine Tank Refill keeps tank & injectors clean
500
0
1 CF Mechanical Softener
All Systems Include:
WG185HE
g NSF Certified pressure tank
g NSF Certified control valve
g WQA Gold Seal Certified cation resin
Removable brine tank
with sliding salt lid
g Pre-installed bypass
Ultimate Salt & Water Savings!
Use 75% Less Salt & 64% Less Water! It’s good for you & good for the environment!
g Injection molded brine grids (twin tanks only)
Estimated Regeneration Water
Used Per Year
Salt Used Per Year
8,000
1600
Gallons
Lbs
Water Softeners & Filters
5,000
4,000
3,000
6 8 % S avin gs
800
600
Injection
molded brine
grid reduces
bridging
6 4 % S avin gs
1000
$200.00
$150.00
$100.00
2,000
400
$50.00
1,000
200
0
Salt Usage
24
7 5 % S avin gs
WQA Tested & Certified to
NSF/ANSI 44 for effective
reduction of hardness as
verified and substantiated
by test data.
$250.00
6,000
1200
7 Year Warranty Lifetime Warranty
Control Valve
Pressure tank
$300.00
7,000
1400
*Compared to conventional calendar clock models
Estimated Annual Operating
Cost (Salt + Water)
185 1 CF
Mech. 185 1 CF
Time
Mech.
Clock
Meter
(15 lbs) (15 lbs)
1369
973
0
185 1 CF
Mech.
Meter
(10 lbs)
185 1 CF
Mech.
Meter
(6 lbs)
701
553
185 1 CF
347
Water Usage
185 1 CF
Mech. 185 1 CF
Time
Mech.
Clock
Meter
(15 lbs) (15 lbs)
6,844
4,867
$
185 1 CF
Mech.
Meter
(10 lbs)
185 1 CF
Mech.
Meter
(6 lbs)
5,256
6,916
185 1 CF
2,469
Operating Cost
185 1 CF
Mech. 185 1 CF
Time
Mech.
Clock
Meter
(15 lbs) (15 lbs)
185 1 CF
Mech.
Meter
(10 lbs)
185 1 CF
Mech.
Meter
(6 lbs)
185 1 CF
$280.14
$169.92
6,916
$91.06
$199.21
Water Softeners & Filters
25
185 Water Softener Specifications
WG185DF Series Water Softener
Features:
Mid Efficiency with Added Features
Specifications
Optional Settings - High Efficiency
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
Factory Settings - Standard Capacity
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
Optional - High Capacity
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
Resin Quantity - Cubic Feet
Tank Size
Tank Jacket / Media Loaded
Brine Tank / Cabinet Size (Inches)
Salt Storage Capacity
Flow Rate @ 15 psi Pressure Drop
Flow Rate @ 25 psi Pressure Drop
Back Wash Flow Rate
Shipping Weight
Regeneration Type
Maximum Efficiency
Plumbing Connections
Resin Type
Electrical Requirements
Water Temperature
Water Pressure
Water Softeners & Filters
reliable piston, seal and spacer technology
WG185UF24C
2130
WG185UF32C
2131
WG185UF24
2132
WG185UF32
2133
WG185UF40
2134
WG185UF60
2135
WG185UF90
2136
2.3 lbs
22.7 gal
11,250
3.0 lbs
28.3 gal
15,000
2.3 lbs
22.6 gal
11,250
3.0 lbs
31.6 gal
15,000
3.75 lbs
39.5 gal
18,750
6.0 lbs
60.9 gal
30,000
9.0 lbs
102.2 gal
45,000
4.5 lbs
40.5 gal
18,750
6.0 lbs
48.6 gal
25,000
4.5 lbs
34.0 gal
18,750
6.0 lbs
43.4 gal
25,000
7.5 lbs
54.3 gal
31,250
12.0 lbs
87.1 gal
50,000
18.0 lbs
139.2 gal
75,000
0 Meter Immediate, Meter Delayed, Meter Overide,and
7.5 lbs
56.1 gal
22,500
10.0 lbs
69.5 gal
30,000
7.5 lbs
49.6 gal
22,500
10.0 lbs
64.3 gal
30,000
12.5 lbs
80.37 gal
40,000
20.0 lbs
124.6 gal
60,000
30.0 lbs
196.2 gal
90,000
0 Brine safety valve provides extra overflow protection
0.75 ft
9x35
Yes
1.0 ft
10x35
Yes
2.0 ft
12x52
No
20.3 x 37.4
350 lbs
12.2 gpm
16.2 gpm
3.5 gpm
172 lbs
3.0 ft
14x65
No
23.0 x 40.5
420 lbs
12.6 gpm
16.6 gpm
5.0 gpm
244 lbs
0.75 ft
1.0 ft
1.25 ft
9x35
10x35
10x47
Yes
Yes
Yes
16.5 x 19.3 x 43.3 16.5 x 19.3 x 43.3
18.1 x 34.5
18.1 x 34.5
18.1 x 34.5
175 lbs
175 lbs
240 lbs
240 lbs
240 lbs
11.6 gpm
12.0 gpm
10.4 gpm
11.0 gpm
12 gpm
15.6 gpm
16.0 gpm
14.3 gpm
15.0 gpm
15.5 gpm
2.0 gpm
2.4 gpm
1.5 gpm
2.0 gpm
2.4 gpm
93 lbs
110 lbs
105 lbs
122 lbs
154 lbs
Counter Current / Up Flow
5,060 grains /lb salt
Includes 3/4” 90°Elbows & 1” Straight NPT
Canature 8% High Capacity Ion Exchange Resin
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
0 Cabinet or Twin Tank models
0 User-friendly backlit LCD display
0 “No Touch” information display rotates key info like last
regeneration date and volume remaining
0 48 hour memory back-up
Calendar Clock mode
0 Adjustable cycle times
0 Unique pre-installed bypass with an integrated space saving Uses 60% Less Salt
48% Less Water*
brine line. Power cord even has quick connect for easy valve spin on.
0 Drain line o-ring eliminates need for Teflon
0 Condensation tank jacket (twin tank models)
All Systems Include:
0 Injection molded brine grids (twin tanks only)
g NSF Certified pressure tank
0 Hose clamp and 10’ of drain tubing included
g NSF Certified control valve
0 WQA Tested & Certified to NSF/ANSI 44 for effective reduction g WQA Gold Seal Certified cation resin
Specifications
turbine meter and sample ports on the inlet. One-piece
design avoids meter jamming.
0 Time saving quick connect fittings on bypass, drain and *Compared to conventional calendar clock models
of hardness as verified and substantiated by test data.
WG185DF24C WG185DF32C
2110
2111
WG185DF24
2113
WG185DF32
2113
WG185DF40
2114
WG185DF60
2115
WG185DF90
2116
Optional Settings - High Efficiency
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
2.3 lbs
22.7 gal
11,250
3.0 lbs
28.3 gal
15,000
2.3 lbs
22.6 gal
11,250
3.0 lbs
31.6 gal
15,000
3.75 lbs
39.5 gal
18,750
6.0 lbs
60.9 gal
30,000
9.0 lbs
102.2 gal
45,000
Factory Settings - Standard Capacity
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
4.5 lbs
40.5 gal
18,750
6.0 lbs
48.6 gal
25,000
4.5 lbs
34.0 gal
18,750
6.0 lbs
43.4 gal
25,000
7.5 lbs
54.3 gal
31,250
12.0 lbs
87.1 gal
50,000
18.0 lbs
139.2 gal
75,000
Optional - High Capacity
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
7.5 lbs
56.1 gal
22,500
10.0 lbs
69.5 gal
30,000
7.5 lbs
49.6 gal
22,500
10.0 lbs
64.3 gal
30,000
12.5 lbs
80.37 gal
40,000
20.0 lbs
124.6 gal
60,000
30.0 lbs
196.2 gal
90,000
0.75 ft
9x35
Yes
1.0 ft
10x35
Yes
2.0 ft
12x52
No
20.3 x 37.4
350 lbs
12.2 gpm
16.2 gpm
3.5 gpm
172 lbs
3.0 ft
14x65
No
23.0 x 40.5
420 lbs
12.6 gpm
16.6 gpm
5.0 gpm
244 lbs
Resin Quantity - Cubic Feet
Tank Size
Tank Jacket / Media Loaded
Brine Tank / Cabinet Size (Inches)
Salt Storage Capacity
Flow Rate @ 15 psi Pressure Drop
Flow Rate @ 25 psi Pressure Drop
Back Wash Flow Rate
Shipping Weight
Regeneration Type
Plumbing Connections
Resin Type
Electrical Requirements
Water Temperature
Water Pressure
26
0 Exclusive WG 185DF NSF Certified electronic control valve with
Offers a balance of technology and
features at a great price point.
User-friendly backlit LCD display with
“No Touch” information display
0.75 ft
1.0 ft
1.25 ft
9x35
10x35
10x47
Yes
Yes
Yes
16.5 x 19.3 x 43.3 16.5 x 19.3 x 43.3 18.1 x 34.5
18.1 x 34.5
18.1 x 34.5
175 lbs
175 lbs
240 lbs
240 lbs
240 lbs
11.6 gpm
12.0 gpm
10.4 gpm
11.0 gpm
12 gpm
15.6 gpm
16.0 gpm
14.3 gpm
15.0 gpm
15.5 gpm
2.0 gpm
2.4 gpm
1.5 gpm
2.0 gpm
2.4 gpm
93 lbs
110 lbs
105 lbs
122 lbs
154 lbs
Co Current / Down Flow
Includes 3/4” 90°Elbows & 1” Straight NPT
Aquafine 8% High Capacity Ion Exchange Resin
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Water Softeners & Filters
27
EconoFlo Series Water Softener
Water Softeners
The economical and reliable EconoFlo Series Water
Softener offers simple electronics for the same price
as mechanical metered units. Offer your customers
more for less. Manually index cycle position for easier,
faster installation and service.
EcoSmart Series Water Softener
Features:
g Exclusive WaterGroup NSF Certified electronic control valve with reliable piston, seal and spacer technology
g Manual index dial for quick manual regeneration or cycle position selection
g Simple electronics: just set time of day, hardness and number of people
Uses 50% Less Salt
28% Less Water*
g Control valve also offers 48 hour memory back up, adjustable cycle times and optional regeneration modes (Meter
Immediate, Meter Delayed, Meter Override, Calendar Clock
g System is WQA Tested and Certified against CSA B483.1
g NSF Certified Pressure Tank
g WQA Gold Seal approved cation exchange resin
g Available in traditional twin tank or compact cabinet design
g Factory installed one piece meter-in-bypass saves installation time and space
ECS-20
g Quick connect fittings on bypass, drain line, brine line and power cord for faster easier installations. Drain line o-ring
eliminates need for Teflon.
Simpler than
setting your
5
10
alarm clock!
5 YEAR
WARRANTY
#15010410
ECS-24
#15010411
ECS-34/39
#15010412 (ECS-34)
#15010414 (ECS-39)
10 YEAR
WARRANTY
5 Year Warranty 10 Year Warranty
Control Valve
Pressure tank
WQA Tested & Certified to
NSF/ANSI 44 for effective
reduction of hardness as
verified and substantiated
by test data.
Features:
0 Engineered for ultimate efficiency on clean
*Compared to conventional calendar clock models
Model
Number
Item
Number
EFC20
2117
EFC30
2118
EFT20
2119
EFT30
2120
EFT40
2121
EFT60
2122
EFT90
2123
Regeneration Type
Plumbing Connections
Resin Type
Electrical Requirements
Water Temperature
Water Pressure
28
Capacity - Grains
Flow Rate
@ 10 lbs/ @ 6 lbs/cu ft @ 3 lbs/
cu ft
Factory Setting
cu ft
Service
USGPM
16,500
22,000
16,500
22,000
27,500
44,000
66,000
8
10
8
10
12
13
15
19,875
26,500
19,875
26,500
33,125
53,000
79,500
Water Softeners & Filters
10,500
14,000
10,500
14,000
17,500
28,000
42,000
Mineral
Total
Cabinet or Brine
Backwash Tank Size Resin (cu. Tank Size Inches
ft.)
(WXDXH)
USGPM (Inches)
2
9X35
0.75
13.8 X 23.6 X 34.5
2.4
10X35
1
13.8 X 23.6 X 34.5
2
9X35
0.75
16.6X 16.7 X 61
2.4
10X35
1
16.6X 16.7 X 61
2.4
10X47
1.25
16.6X 16.7 X 61
3.5
12X52
2
18.9 X 18.9 X65.6
5
14X65
3
24.6 X 24.6 X 84
Co current / Down Flow
Includes 3/4” 90°Elbows & 1” Straight NPT
Aquafine 8% High Capacity Ion Exchange Resin
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Salt
Shipping
Capacity Weight
(lbs)
(lbs)
225
225
230
230
230
270
700
93
110
93
110
141
158
244
municipal water applications
0 Compact design for small spaces
0 Uses over 75% less salt & water than
conventional water softeners
0 EcoSmart™ Intelligent electronic control:
• Simple intuitive electronics. No confusing
codes or symbols!
• Rotating performance information display!
• Adjustable cycles for peak efficiency!
0 High-efficiency fine mesh cation resin
0 Quality injection & blow molded cabinet
0 Push release hinged salt lid for easy salt refill
0 Brine safety valve provides additional overflow
protection
0 ECS-34 model not only softens but also filters
out bad tastes & odors caused by chlorine &
organics
0 Removes up to 10 ppm ferrous iron
Water Softeners & Filters
29
Eco-Friendly Efficiency
Traditional
Softeners
Shower Softener
Compact Design
Super compact design is perfect
for main floor laundry or where
space is at a premium!
Traditional
Softeners
6 - 15 Lbs
60 - 100 Gallon
43”
Just want soft water for your shower? This compact waterproof shower unit requires no electricity. The one-step
manual regeneration is easy to operate. Small portable
design makes it perfect for non-winterized cottages.
35”
26”
1.5 Lbs
1.69$
9.6
Gallon
18”
13”
13”
ECS-20
ECS-24
18”
13”
18”
ECS-34/39
Easy Installation
Water Usage
Per Regeneration
Annual Cost
of Electricity
Salt Usage
Per Regeneration
Quality & Warranty
Complete installation kit including bypass,
plumbing fittings & drain tubing. Quick connect
fittings for simple installation. Includes easy to
follow installation guide.
EcoSmart™ Water Softeners are built to last! All
softeners are third party certified to meet the
industry’s most exacting standards and backed by
one of the industries strongest warranties:
• Seven Year System Warranty
• Lifetime Pressure Tank & Cabinet
Warranty
WQA Tested & Certified to
NSF/ANSI 44 for effective
reduction of hardness as
verified and substantiated
by test data.
7 Year Warranty Lifetime Warranty
Control Valve
Pressure tank
ECS-20
15010410
ECS-24
15010411
ECS-34
15010412
ECS-39
15010414
19,500 grains
24,180 grains
34,320 grains
39,000 grains
Salt Used
1.5 lbs
2.1 lbs
2.4 lbs
3.0 lbs
Water Used
9.6 gal
11.7 gal
15.8 gal
17.9 gal
7,300 grains
10,200 grains
11,700 grains
15,400 grains
Specifications
Maximum Hardness Removal
EcoSmart™ control valve &
pressure tanks are NSF
Certified
Features:
Factory Settings - High Efficiency
System Capacity
0 Easy installation
0 No electricity required
0 Waterproof slide cover
High Capacity Settings
Salt Used
3.0 lbs
3.7 lbs
5.3 lbs
6.0 lbs
Regeneration Water Used
16.9 gal
21.4 gal
32.5 gal
34.6 gal
25,000 grains
System Capacity
12,000 grains
16,800 grains
19,200 grains
Coconut Activated Carbon
No
No
Yes
No
Integrated Meter in Bypass
Yes
Yes
Yes
Yes
Plumbing Connections
3/4” or 1”
3/4” or 1”
3/4” or 1”
3/4” or 1”
Flow Rate @ 15 psi Pressure Drop
10.9 gpm
10.2 gpm
10.0 gpm
10.0 gpm
Salt Storage Capacity
80 lbs
120 lbs
170 lbs
170 lbs
Shipping Weight
58.5 lb
68.3 lb
84.3 lb
87.5 lb
Regeneration Type
Co-current / Downflow
Maximum Efficiency
5,600 grains /lb salt
Electrical Requirements
Maximum Water Temperature
Water Pressure
Foot Print
Plumbing Connections
30
Water Softeners & Filters
120V 50/60 Hz
120 degrees Fahrenheit
0 One step regeneration process
Item #
15180001
Model
Mineral Tank Size
(IN)
Resin
Cu Ft
Brine Tank / Cabinet
Size Inches (WxDxH)
Ship Weight
(Lbs)
SHOWER SOFTENER
7 x 13
0.22
8.7 x 14.2 x 19.2
20
min. 20 - max. 120 psi
13” w x 18” d (ECS-20 26” h / ECS-24 35” h / ECS-34&39 43” h)
Includes 3/4” 90°Elbows & 1” Straight NPT
Water Softeners & Filters
31
Whole-House Automatic
Water Filters
185 Filters
Protect Your Plumbing From Bad Taste
and Odor Caused by Chlorine and Other
Chemicals.
Filter Media Volume - Cubic Feet
Filter Tank Size
Tank Jacket / Media Loaded
Shipping Weight
Remove Disinfectants From Your Water
Recommended Flow Rates
Backwash Flow Rate
Once water arrives safely at your home there is no further
need for disinfectants. In fact they are undesirable!
Filter Media Volume - Cubic Feet
Filter Tank Size (qty 2)
Tank Jacket
Shipping Weight
Carbon Type
0 Taste and bad odor
0 Dry skin
0 Damage plumbing
0 Can produce potentially harmful by-products
Leaky Faucet or Toilet?
Chlorine is a strong oxidant that quickly destroys plastic
& rubber seals & gaskets in appliances & plumbing
causing leaks.
Pin Hole Leaks in Pipes!
Chloramines are corrosive by nature and will eventually cause
costly damage to plumbing – causing pitting & pin hole leaks.
Specifications
Normal Service Flow Rate
Peak Service Flow Rate
Backwash Flow Rate
Specifications
WG185ACF75
2150
4.0 gpm
5.0 gpm
3.5 gpm
WG185ACF10
2151
5.0 gpm
7.0 gpm
4.0 gpm
WG185ACF15
2152
7.0 gpm
10.0 gpm
5.0 gpm
WG185ACF20
2153
10 gpm
12.0 gpm
7.0 gpm
WG185ACF30
2220
12.0 gpm
15.0 gpm
10.0 gpm
0.75 ft3
8x44
Yes
50 lbs
1.0 ft
9x48
Yes
60 lbs
1.5 ft
10x54
Yes
78 lbs
2.0 ft
12x52
No
95 lbs
3.0 ft
14x65
No
138 lbs
WG185CLAF75
2221
4.0 gpm
3.5 gpm
WG185CLAF10
2222
5.0 gpm
4.0 gpm
WG185CLAF15
2223
7.5 gpm
5.0 gpm
WG185CLAF20
2224
10.0 gpm
7.0 gpm
1.5 ft3
8x44
Yes
100 lbs
2.0 ft
3.0 ft
9x48
10x54
Yes
Yes
120 lbs
155 lbs
Canature Catalytic Carbon
4.0 ft
12x52
No
190 lbs
WG185MMF75 WG185MMF10 WG185MMF15 WG185MMF20 WG185MMF30
2166
2167
2168
2169
2225
4.0 gpm
5.0 gpm
7.0 gpm
10.0 gpm
12.0 gpm
5.0 gpm
7.0 gpm
10.0 gpm
12.0 gpm
15.0 gpm
15-20 micron
15-20 micron
15-20 micron
15-20 micron
15-20 micron
4.0 gpm
5.0 gpm
7.0 gpm
10.0 gpm
14.0 gpm
Specifications
Normal Service Flow Rate
Peak Service Flow Rate
Micron Rating
Backwash Flow Rate
Filter Media Volume - Cubic Feet
Filter Tank Size
Tank Jacket / Media Loaded
Shipping Weight
0.75 ft3
8x44
Yes
79 lbs
1.0 ft
9x48
Yes
118 lbs
1.5 ft
10x54
Yes
144 lbs
2.0 ft
12x52
No
198 lbs
3.0 ft
14x65
No
342 lbs
WG185ULTRAMF75 WG185ULTRAMF10 WG185ULTRAMF15 WG185ULTRAMF20
Specifications
Normal Service Flow Rate
Peak Service Flow Rate
Micron Rating
Backwash Flow Rate
Filter Media Volume - Cubic Feet
Filter Tank Size
Tank Jacket
Shipping Weight
Specifications
Normal Service Flow Rate
Peak Service Flow Rate
Backwash Flow Rate
Filter Media Volume - Cubic Feet
Filter Tank Size
Tank Jacket / Media Loaded
Shipping Weight
2170
4.0 gpm
7.0 gpm
3-5 micron
5.0 gpm
2171
5.0 gpm
8.0 gpm
3-5 micron
7.0 gpm
2172
8.0 gpm
10.0 gpm
3-5 micron
10.0 gpm
2173
10.0 gpm
12 gpm
3-5 micron
14.0 gpm
0.75 ft3
8x44
Yes
90 lbs
1.0 ft
9x48
Yes
135 lbs
1.5 ft
10x54
Yes
205 lbs
2.0 ft
12x52
No
255 lbs
WG185NNF75
2174
2.0 gpm
3.5 gpm
3.5 gpm
WG185NNF10
2175
3.0 gpm
5.0 gpm
4.0 gpm
WG185NNF15
2176
5.0 gpm
8.0 gpm
5.0 gpm
WG185NNF20
2177
6.0 gpm
10.0 gpm
7.0 gpm
WG185NNF30
2226
7.0 gpm
12.0 gpm
10.0 gpm
0.75 ft3
8x44
Yes
93 lbs
1.0 ft
9x48
Yes
120 lbs
1.5 ft
10x54
Yes
164 lbs
2.0 ft
12x52
No
207 lbs
3.0 ft
14x65
No
330 lbs
WG185NNF10CALC WG185NNF15CALC
2227
3.0 gpm
5.0 gpm
4.0 gpm
2228
5.0 gpm
8.0 gpm
5.0 gpm
1.0 ft
9x48
Yes
120 lbs
1.5 ft
10x54
Yes
164 lbs
For low pH applications
WG185ISF75
2162
3.0 gpm
4.0 gpm
3.5 gpm
4,500 ppm
4 oz
Specifications
Normal Service Flow Rate
Peak Service Flow Rate
Backwash Flow Rate
Compensated Iron Removal Capacity
KMn04 per Regen
WG185ISF10
2163
3.0 gpm
5.0 gpm
4.0 gpm
6,000 ppm
4 oz
WG185ISF15
2164
4.0 gpm
8.0 gpm
5.0 gpm
9,500 ppm
4 oz
WG185ISF20
2165
5.0 gpm
10.0 gpm
7.0 gpm
12,000 ppm
8 oz
WG185ISF30
2197
6.0 gpm
12.0 gpm
10.0 gpm
18,000 ppm
8 oz
1.0 ft
9x48
Yes
129 lbs
1.5 ft
10x54
Yes
179 lbs
2.0 ft
12x52
No
233 lbs
3.0 ft
14x65
No
352 lbs
Filter Media Volume - Cubic Feet
0.75 ft3
Filter Tank Size
8x44
Tank Jacket / Media Loaded
Yes
Shipping Weight
113 lbs
Maximum Combination of Iron X 1, Manganese X 2,
H2S X3
Maximum Iron (Ferrous)
Bacterial Iron
10.0 ppm
7.0 ppm
0.0 ppm
Maximum Hydrogen Sulfide
Maximum Manganese
Minimum pH
3.0 ppm
5.0 ppm
7.0
All Filters
Plumbing Connections
Includes 3/4” 90°Elbows & 1” Straight NPT
Electrical Requirements Input 120V 60 Hz - Output 12V 650mA
Water Temperature
Water Pressure
32
Water Softeners & Filters
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Water Softeners & Filters
33
WaterGroup 185 Series Water Filters
WaterGroup 465 BIF Chemical Free
iron Filter
Problem water is no problem with our full line of WaterGroup 185
Water Filters. Eliminate iron, sediment, bad tastes, stains and odors,
as well as, color caused by organics. The high-efficiency control
valve monitors water usage and flushes the system automatically,
readying it for operation again.
Features:
0 Natural oxidation removes iron, manganese and sulphur
0 Taste & Odor Filters (ACF): Chlorine and organic matter can
make your water smell and taste terrible. The WaterGroup
185 Taste & Odor filter uses high-quality granular activated
carbon to absorb the problem-causing substances.
0 Low maintenance two tank system
0 Regenerates less frequently than traditional iron filters using up 0 Chloramine Removal Filters (CLAF): Chloramines are now commonly used to disinfect municipal water supplies
causing taste & odor problems. To remove chloramines a
special catalytically enhanced carbon is required.
0 NSF Certified fibreglass pressure tanks
0 Meter Immediate, Meter Delayed, Meter with Day Override, have suspended silt: or sediment. Restore your water
to crystal clear as the WaterGroup 185 Multi-Media filter traps particulate matter as small as 20 microns.
solids, Ferric Hydroxide (Red Water Iron) or Sediment from your well or water system down to 5 Microns. Nexsand has proven extremely effective and will double the service flow of Multi Media or Sand Filters.
0 Neutralizing Filters (NNF): The WaterGroup 185 Neutralizing
filters raise the pH of acidic water to neutralize corrosiveness protecting fixtures, pipes and appliances.
Vacation and Calendar Clock mode
0 Adjustable cycle times
0 Unique bypass with an integrated space saving turbine meter 0 Nexsand Turbidity Filters (Ultra MF): Remove suspended
and sample port on the inlet. One-piece design avoids meter jamming
0 Time saving quick connect fittings on bypass
Chloramine (CLAF) Units
use Two Tank System for
effective reduction of
chloramines
Uses up to
50% less
water!
0 Iron & Sulfur Filters (ISF): Water comes in contact with to 50% less water than manganese greensand filters
0 NSF Certified electronic control valve
0 Multi Media Filters (MM): Cloudy water means you likely without chemicals, air pumps or a venturi
manganese greensand causing oxidization into solids which can be trapped in the filter bed
0 Quick connect drain line o-ring eliminates need for Teflon
0 Power cord even has quick connect for easy valve spin on
0 Hose clamp and 10’ of drain tubing included
7 Year Warranty Lifetime Warranty
Control Valve
Pressure tank
7
LIFETIME
WARRANTY
7 YEAR
WARRANTY
7 Year Warranty
Control Valve
Features:
0 Exclusive NSF Certified control valve with reliable
electronic sensors, adjustable cycle time and
proven piston, seal & spacer design
Lifetime Warranty
Pressure tank
0 Time saving quick connect fittings on bypass, drain & brine line. Even the power cord has quick
connects
0 NSF Certified fibreglass pressure tank
0 Drain line o-ring. No need for Teflon
0 Tank jackets reduce condensation.
0 Audible Cycle Advance Alarm
0 User-friendly backlit LCD display
0 48 hour self charging battery back-up
0 Simple set up and programming with no confusing 0 Meter Immediate, Meter Delayed, and Meter with codes or symbols to remember
0 Automatic Vacation Mode prevents media
cementing
Item #
Model
2198
2199
2200
2205
2206
2207
WG465BIF75
WG465BIF10
WG465BIF15
WG465BIFMN75
WG465BIFMN10
WG465BIFMN15
Flow Rate USGPM
Media Cu
Mineral Air Con- Pipe Size
Ft
Service
Peak Backwash Tank Size tact Tank Inches
0.75
1.0
1.5
0.75
1.0
1.5
2.0
3.0
4.0
2.0
3.0
4.0
5.0
6.0
10.0
5.0
6.0
10.0
3.5
4.0
5.0
3.5
4.0
5.0
8 x 44
10 x 44
10 x 54
8 x 44
10 x 44
10 x 54
8 x 44
8 x 44
10 x 54
8 x 44
8 x 44
10 x 54
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Ship
Weight
Lbs
132
150
188
132
150
188
*MN Models for low pH and/or high manganese applications
Day Over ride
0 Includes hose clamp and 10’ of drain tubing
0 “No Touch” LCD information display rotates key info like last regeneration date, current flow rate & peak flow rate
0 Unique, compact one piece bypass with
integrated turbine meter
34
35
95 BIF Series Two Tank Iron Filter System
AIO Chem Free Iron Filter
Remove Stubborn Iron, Manganese &
Hydrogen Sulfide Without Chemicals
Incoming raw water passes through a compressed pocket of air contained in
the first tank. The air precipitates the iron into solid form and is removed when
it passes through the filters media bed contained in the second tank. The
media acts as a catalyst in the reaction between iron and oxygen that also
causes the iron to precipitate into a solid.
As more water passes through the unit the air becomes depleted and the
media becomes overloaded with the iron. Periodic automatic regeneration
replenishes the supply of air and cleans the media of filtered iron. The media
is not consumed in the iron removal process and therefore is much more economical than many other iron removal processes.
Features:
0 Natural oxidation removes iron, manganese and H2S without chemicals, air pumps or a venturi
The AIO Chemical Free Iron filter is intended to be an effective and economical way to
remove iron from water without the use of messy and dangerous chemicals or expensive
pumps or an external venturi. The AIO valve uses a patented construction to create an air
bubble at the upper portion of the tank to oxidize any ferrous iron prior to being filtered by
the media. It can also used to remove low concentrations of dissolved hydrogen sulfide
and manganese from water.
How does the AIO (Air Induction Oxidization) filter work?
This filter works by adding oxygen to the incoming water by passing it through a bubble of
compressed air. The water is then passed through a special filter bed
The special media not only increases the pH of the water to enhance iron removal but also
acts as a physical barrier to trap iron precipitate.
As more water passes through this iron filter, the oxygen in the unit is used up, and the
media gets loaded with iron. The regeneration process then begins in order to replenish
the supply of oxygen, and to backwash the precipitated iron trapped in the media bed.
The iron removal efficiency will be more effective with high pH water.
The filter is fitted with an inlet check valve to prevent any air from flowing backwards out
of the filter tank.
0 System regenerates less frequently using up to 50% less water than
manganese greensand filters
0 Exclusive Canature 95 Series control valve with reliable electronic sensors, piston, seals and spacer technology
0 Water proof power head enclosure
0 High flow rates for large residential & commercial applications
0 Time saving quick connects for easy installation
0 Easy access sample ports with quick connect clips
95BIF-100
95BIF-150
95BIF-200
95BIF-300
95BIF-400
95BIF-500
Specifications
2208
2209
2210
2211
2212
2213
*MN Models for low pH 6.0 - 6.9 &
95BIFMN-100 95BIFMN-150 95BIFMN-200 95BIFMN-300 95BIFMN-400 95BIFMN-500
Manganese up to 1.0 ppm
2214
2215
2216
2217
2218
2219
Typical Service Flow Rate
3.0 gpm
4.0 gpm
5.0 gpm
6.0 gpm
7.0 gpm
9.0 gpm
Peak Flow Rate
6.0 gpm
10.0 gpm
12.0 gpm
14.0 gpm
16.0 gpm
18.0 gpm
Backwash Flow Rate
5.0 gpm
5.0 gpm
7.0 gpm
10.0 gpm
14.0 gpm
21.0 gpm
Filter Media Volume - Cubic Feet
Filter Tank Size
Air Contact Tank Size
Shipping Weight
Media Loaded
Maximum Iron
Hydrogen Sulfide
Mangansese
Iron Bacteria Removal
pH
Plumbing Connections
Electrical Requirements
Water Temperature
Water Pressure
36
Water Softeners & Filters
1.0 ft
10x44
8x44
150 lbs
Yes
1.5 ft
10x54
10x54
188 lbs
Yes
2.0ft
12x52
12x52
248 lbs
No
3.0 ft
4.0 ft
14x65
16x65
14x65
14x65
368 lbs
443 lbs
No
No
30.0 ppm
5.0 ppm
BIF Model 0.0 ppm / BIFMN Models up to 1.0 ppm
Yes
BIF Models pH 7.0 - 8.5 / BIFMN Models pH 6.0 -6.9
3/4”, 1”, 1 1/4”, 1 1/2”
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
5.0 ft
18x65
14x65
518 lbs
No
Item #
Model
Media Cu Ft
Flow Rate USGPM
Service
Peak
AIO (Air Induction Oxidizer) Chemical Free Iron Filter (Single Tank)
2231 FILTER, WG665FAIO75
0.75
2
4
2232 FILTER, WG665FAIO10
1.0
3
6
2233 FILTER, WG665FAIO15
1.5
4
10
2235 FILTER, WG665FAIO75M
0.75
2
4
2236 FILTER, WG665FAIO10M
1.0
3
6
2237 FILTER, WG665FAIO15M
1.5
4
10
Mineral Pipe Size
Backwash Tank Size Inches
3.5
4
5
3.5
4
5
8 x 44
9 x 48
10 x 54
8 x 44
9 x 48
10 x 54
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Ship
Weight
Lbs
110
145
250
110
145
250
Water Softeners & Filters
37
Hydrogen Sulfide Reduction AIO Filter
WG NRV (Non-Regenerating Valve) Whole
House Carbon Filter
Does Your Water Stink?
Hydrogen sulfide (H2S) is a nuisance. It adds an objectionable
sulfur-like taste and “rotten egg” odor to drinking water. Left
untreated, it can also lead to corrosion in drainage pipes and
concrete sewers.
Economical Reduction of Chlorine, Chloramines
and other bad taste & Odors.
Features:
0 Economical whole-house carbon filtration solution for reducing chlorine
Features:
0 Combines aeration with catalytic carbon technology
to effectively reduce sulfur from water.
(TO models) , chloramines (TOK models) and other bad tastes and odors
0 Factory installed one-piece bypass with incorporated meter
0 No more bad taste or odor.
0 Time saving quick connect fittings (90° ¾” NPT Elbows and 1” Straight NPT) 0 No Chemicals to buy, mix or add
0 No weekly water tests to perform
included for faster, easier installation. Optional quick connect SharkBite® fittings also available.
0 Five year warranty on Distribution Head
0 Simple, Fully Automatic regeneration with Air
0 Ten Year Warranty on NSF Certified tank
Economical non-backwashing distribution
head with convenient
quick connect fittings
Specifications
Item #
Model
Cat Carbon
Cu Ft
Flow Rate USGPM
Service
Peak
Mineral Pipe Size
Backwash Tank Size Inches
AIO (Air Induction Oxidizer) Filter For Hydrogen Sulfide Reduction (Single Tank)
2238 FILTER, WG665FAIOC75
0.75
2
4
3.5
2239 FILTER, WG665FAIOC10
1.0
3
6
4
2240 FILTER, WG665FAIOC15
1.5
4
10
5
38
Water Softeners & Filters
8 x 44
9 x 48
10 x 54
3/4”
3/4”
3/4”
Ship
Weight
Lbs
110
145
250
Service Flow Rates
Normal
Peak
Filter Media Volume - Cubic Feet
Filter Tank Size
Media Type
Media Loaded
KDF Protector
Tank Jacket
Shipping Weight
Plumbing Connections
Electrical Requirements
Water Temperature
Water Pressure
NRV TO-100
15054073
NRV TO-150
15054074
NRV TOK-100
15054075
NRV TOK-150
15054076
5.0 gpm
7.0 gpm
1.0 ft
9x48
Coconut Carbon
Yes
No
No
60 lbs
7.0 gpm
10.0 gpm
1.5 ft
10x54
Coconut Carbon
Yes
No
No
78 lbs
5.0 gpm
7.0 gpm
1.0 ft
9x48
Coconut Carbon
Yes
Yes
No
60 lbs
7.0 gpm
10.0 gpm
1.5 ft
10x54
Coconut Carbon
Yes
Yes
No
78 lbs
Includes 3/4” 90°Elbows & 1” Straight NPT. Bypass Included.
None
Min 39 - Max. 100 degrees Fahrenheit
Max. 125 psi
Water Softeners & Filters
39
Specialty Systems
Soften & Filter Problems From Your Water
SIMTAN Series
Specifications
Combination units provide one solution for multiple problems
saving you space and money
WaterGroup 185 Series Specialty
Combination Systems
WaterGroup offers a variety of specialty systems to fix a variety
of water problems commonly found in combination in one
water supply.
Types of Specialty Systems:
2181
2185
2182
2186
2183
2187
Salt Used - Per Regeneration
12.0 lbs
18.0 lbs
24.0 lbs
36.0 lbs
Water Used - Regeneration
64.3 gal
90.3 gal
124.6 gal
196.2 gal
Hardness Removal - Grains
30,000
45,000
60,000
90,000
Tannins Removal
2000 ppm
3000 ppm
4000 ppm
6000 ppm
Tank #1 Resin Quantity - Cubic Feet
1.0 ft
1.5 ft
2.0 ft
3.0 ft
Tank #2 Resin Quantity - Cubic Feet
1.0 ft
1.5 ft
2.0 ft
3.0 ft
Tank Size
9x48
10x54
12x52
14x65
Tank Jacket / Media Loaded
Yes
Yes
No
No
Brine Tank / Cabinet Size (Inches)
18.1 x 34.5
20.3 x 37.4
20.3 x 37.4
23.0 x 40.5
Salt Storage Capacity
240 lbs
350 lbs
350 lbs
420 lbs
Recommended Service Flow Rate
3.0 gpm
4.5 gpm
6.0 gpm
9.0 gpm
Flow Rate @ 15 psi Pressure Drop
7.3 gpm
7.5 gpm
8.3 gpm
9.3 gpm
Flow Rate @ 25 psi Pressure Drop
10.0 gpm
10.1 gpm
11.1 gpm
11.4 gpm
Back Wash Flow Rate
2.0 gpm
2.4 gpm
3.5 gpm
5.0 gpm
Shipping Weight
125 lbs
158 lbs
161 lbs
247 lbs
Regeneration Type
Softener, Iron, Manganese & Tannin Removal
Maximum Hardness
75 Grains Per Gallon
Maximum Tannins
3.0 ppm (Contact Customer Service for higher levels)
Maximum Iron (Ferrous)
10.0 ppm
Maximum Manganese
5.0 ppm
Resin Type
Aquafine Cation / Anion Exchange Resin
IronGuard SIM Series
Softener, Iron and Manganese Combination Removal
TAN Series
Uses anion exchange resin to remove color caused by organic
decay
HTO Series
Softener, Taste and Odor Removal
HEDP Series
Dual Pass Softener for High Hardness ( > 75 gpg) Applications
NeutraSoft Series
Softens and adjusts low pH water
7
7 YEAR
WARRANTY
7 Year Warranty
Control Valve
LIFETIME
ST Series
Specifications
Co-Current / Down Flow
WG185ST45-860 WG185ST60-860 WG185ST90-860
2179
2141
2142
Specifications
Factory Settings - High Capacity
Salt Used - Per Regeneration
Water Used - Regeneration
Resin Quantity - Cubic Feet
Tank Size
Tank Jacket / Media Loaded
Brine Tank / Cabinet Size (Inches)
Salt Storage Capacity
Recommended Service Flow Rate
Flow Rate @ 15 psi Pressure Drop
Flow Rate @ 25 psi Pressure Drop
Back Wash Flow Rate
Shipping Weight
Regeneration Type
Maximum Hardness
Maximum Tannins
Resin Type
18.0 lbs
74.4 gal
24.0 lbs
101.4 gal
36.0 lbs
166 gal
1.5 ft
10x54
Yes
2.0 ft
12x52
No
3.0 ft
14x65
No
20.3 x 37.4
20.3 x 37.4
23.0 x 40.5
350 lbs
3.0 gpm
11.2 gpm
15.1 gpm
2.4 gpm
158 lbs
350 lbs
420 lbs
3.0 gpm
6.0 gpm
12.2 gpm
12.6 gpm
16.2 gpm
16.6 gpm
3.5 gpm
5.0 gpm
175 lbs
247 lbs
Co-Current / Down Flow
20 Grains Per Gallon
1.0 ppm
Aquafine Cation / Anion Exchange Resin
WARRANTY
All Specialty Systems
Lifetime Warranty
Pressure tank
SIM /ST Series
Easy Feeder plus 64 oz
bottle of Res Care.
Included with iron
removal systems
Water Softeners & Filters
2180
2184
SIMTAN Series
ST Series
Softener, Tannin and Color Combination Removal
40
WG185SIMTAN10 WG185SIMTAN15 WG185SIMTAN20 WG185SIMTAN30
Factory Settings - High Capacity
Many ground water supplies often have multiple problems that
are not only an issue from an aesthetic standpoint but in terms
of cost when pipes become clogged, fixtures stained and
laundry discolored.
SIMTAN Series
Specifications
Purolite 850 Models*
Purolite 860 Models*
Plumbing Connections
Includes 3/4” 90°Elbows & 1” Straight NPT
Electrical Requirements
Water Temperature
Water Pressure
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Water Softeners & Filters
41
185 IronGuard SIM Series
185 TAN
This system uses Anion exchange resin to remove color caused by
organic decay - greatly improving aesthetics and preventing costly
staining.-
Enjoy Iron-Free Soft Water
Combining proven water softener capabilities with the ability to remove
clear and red water iron, the Iron Guard SIM system provides an effective
and economical solution to hard and iron contaminated water. In addition,
Iron Guard Plus, is specially designed for application in low pH (acidic) water.
Hard water contains dissolved calcium and magnesium which build up inside
your water heater, plumbing fixtures and appliances. The minerals also react
with soap to form a scum which appears as bathtub ring, greys your laundry
and leaves your hair dull and your skin itchy. Iron water leaves yellow, orange
or brown stains on your laundry, sinks, tubs and toilets.
Iron Guard contains a bed of fine mesh ion exchange resin beads. As water
passes through the bed, calcium and magnesium, the hardness minerals,
and any clear or red water iron are removed and held by the resin. The Iron
Guard Plus bed contains calcium carbonate in addition to the fine mesh ion
exchange resin. This media combines to raise low pH water to enable the
resin to remove hardness and red water iron.
Eventually, the resin beads become saturated and must be regenerated. A
brine solution is drawn into the bed to drive out the accumulated minerals.
This process is called ion exchange. After the minerals and brine are rinsed
out with fresh water, the regenerated resin is ready to soften your water
again. The demand regeneration control valve includes a metering system
which monitors your soft water use, regenerating only when necessary based
on your water usage. Consequently, you save salt, water and money.
Specifications
Factory Settings - Iron & Manganese
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
Resin Quantity - Cubic Feet
Tank Size
Tank Jacket / Media Loaded
Brine Tank / Cabinet Size (Inches)
Salt Storage Capacity
Flow Rate @ 15 psi Pressure Drop
Flow Rate @ 25 psi Pressure Drop
Back Wash Flow Rate
Shipping Weight
Regeneration Type
Maximum Hardness
Maximum Iron (Ferrous)
Maximum Manganese
Resin Type
42
Water Softeners & Filters
WG185SIM30 WG185SIM45 WG185SIM60 WG185SIM90 WG185SIM30+
2137
2138
2139
2178
2140
12.0 lbs
52.2 gal
30,000
1.0 ft
9x48
Yes
18.0 lbs
74.4 gal
45,000
1.5 ft
10x54
Yes
24.0 lbs
101.4 gal
60,000
2.0 ft
12x52
No
36.0 lbs
166 gal
90,000
3.0 ft
14x65
No
36.0 lbs
166 gal
90,000
3.0 ft
14x65
No
18.1 x 34.5
20.3 x 37.4
20.3 x 37.4
23.0 x 40.5
23.0 x 40.5
240 lbs
11.0 gpm
15.0 gpm
2.1 gpm
125 lbs
350 lbs
350 lbs
420 lbs
420 lbs
11.2 gpm
12.2 gpm
12.6 gpm
12.6 gpm
15.1 gpm
16.2 gpm
16.6 gpm
16.6 gpm
2.4 gpm
3.5 gpm
5.0 gpm
5.0 gpm
158 lbs
175 lbs
247 lbs
247 lbs
Co-Current / Down Flow
75 Grains Per Gallon
10 ppm
5 ppm
Aquafine High Efficiency Cation Ion Exchange Resin
Specifications
Purolite 850 Models*
Purolite 860 Models*
WG185TAN10
2229
2230
WG185TAN15
2143
2146
WG185TAN20
2144
2147
WG185TAN30
2145
2148
12.0 lbs
18.0 lbs
24.0 lbs
36.0 lbs
Factory Settings - High Capacity
Salt Used - Per Regeneration
Water Used - Regeneration
64.3 gal
90.3 gal
124.6 gal
196.2 gal
Tannins Removal
2000 ppm
3000 ppm
4000 ppm
6000 ppm
Resin Quantity - Cubic Feet
1.0 ft
1.5 ft
2.0 ft
3.0 ft
Tank Size
9x48
10x54
12x52
14x65
Tank Jacket / Media Loaded
Yes
Yes
No
No
Brine Tank / Cabinet Size (Inches)
18.1 x 34.5
20.3 x 37.4
20.3 x 37.4
23.0 x 40.5
Salt Storage Capacity
240 lbs
350 lbs
350 lbs
420 lbs
Recommended Service Flow Rate
3.0 gpm
4.5 gpm
6.0 gpm
9.0 gpm
Flow Rate @ 15 psi Pressure Drop
11.0 gpm
11.2 gpm
12.2 gpm
12.6 gpm
Flow Rate @ 25 psi Pressure Drop
15.0 gpm
15.1 gpm
16.2 gpm
16.6 gpm
Back Wash Flow Rate
2.0 gpm
122 lbs
2.4 gpm
155 lbs
3.5 gpm
158 lbs
5.0 gpm
244 lbs
Shipping Weight
Regeneration Type
Co-Current / Down Flow
Maximum Tannins
3.0 ppm (Contact Customer Service for higher levels)
Plumbing Connections
Includes 3/4” 90°Elbows & 1” Straight NPT
Resin Type
Canature Anion Resin
Electrical Requirements
Input 120V 60 Hz - Output 12V 550mA
Water Pressure
Min. 20 - Max. 125 psi
Water Softeners & Filters
43
185 HTO
Rid your water of hardness & bad tastes and odor caused by chlorine, chloramines or organic matter.
185 HEDP
On very hard water supplies (> 75 gpg), a common problem
with single tank water softeners is the occurrence of hardness leakage or ‘slippage’ as the extreme hardness will find a
channel through the resin bed.
The unique two tank system keeps the two media beds separate
and allows for more carbon contact improving chlorine, chloramines and organic removal.
The WaterGroup High-Efficiency Dual Pass (HEDP) Water Softener uses a two tank system to prevent this problem. The first
tank acts as the workhorse by significantly reducing the water
hardness. The second tank acts as a ‘polisher’ and prevents
slippage as the overpowering high hardness condition has
been significantly reduced. This also increases the contact
time with the softening resin meaning more consistent, softer
water.
Because the carbon may need to be replaced before the softening resin, the two tank system allows for replacement without
having to change the resin bed unlike many traditional mixed bed
systems. Same benefit as separate systems but with cost of only
one control valve.
Features:
0 Dedicated softening & carbon filtration tanks provide truly refined water
Salt efficiency is even more important on high hardness situations. The Novo HEDP offers salt-efficient reverse flow regeneration with precision brining for ultimate salt savings.
0 NSF Certified control valve with electronic sensors,
adjustable cycles & proven piston, seal & spacer design
0 Reverse Flow regeneration preserves unused portion
Features:
0 Precision brining calculates the exact amount of brine 0 Two tank system provides softer, more
of softening bed from unnecessary exchange saving salt
required to regenerate saving up to 30% more salt
0 Backwash Frequency Preset for clean municipal water saves water by matching backwash to water quality need
0 Perfect for high hardness (typically > 75 gpg)
0 Soft Water brine tank refill keeps tank & injectors clean
0 Automatic system refresh flushes stagnant water
0 NSF Certified fibreglass pressure tank
0 More cost effective than larger single tank 0 Reverse Flow Regeneration preserves
0 User-friendly backlit LCD display
Factory Settings
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
Tank #1 Carbon Quantity - Cubic Feet
Tank #2 Resin Quantity - Cubic Feet
Tank Size
Tank Jacket / Media Loaded
Brine Tank / Cabinet Size (Inches)
Salt Storage Capacity
Flow Rate @ 15 psi Pressure Drop
Flow Rate @ 25 psi Pressure Drop
Back Wash Flow Rate
Shipping Weight
Regeneration Type
Plumbing Connections
Resin Type
Carbon Type
Electrical Requirements
Water Temperature
Water Pressure
44
Water Softeners & Filters
WG185HTO25
2188
WG185HTO38
2189
6.0 lbs
86.4 gal
25,000
1.0 ft
1.0 ft
9x48
Yes
9.0 lbs
148 gal
37,500
1.50 ft
1.50 ft
10x54
Yes
12.0 lbs
162.4 gal
50,000
2.0 ft
2.0 ft
12x52
No
18.0 lbs
224.8 gal
75,000
3.0 ft
3.0 ft
14x65
No
18.1 x 34.5
18.1 x 34.5
20.3 x 37.4
23.0 x 40.5
240 lbs
7.2 gpm
10.0 gpm
2.4 gpm
154 lbs
residential and light commercial
applications such as boiler feed systems
systems
0 WQA Gold Seal Certified cation resin
Specifications
consistent water quality and prevents hardness slippage which can occur in single tank systems
WG185HTO50 WG185HTO75
2190
2191
240 lbs
350 lbs
420 lbs
7.4 gpm
9.0 gpm
9.2 gpm
10.1 gpm
11.9 gpm
12.1 gpm
3.5 gpm
4.0 gpm
5.0 gpm
171 lbs
214 lbs
232 lbs
Counter Current / Up Flow
Includes 3/4” 90°Elbows & 1” Straight NPT
Canature 8% High Capacity Ion Exchange Resin
Catalytic Carbon
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Specifications
Factory Settings
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
unused portion of softening bed from
unnecessary exchange saving salt
WG185HEDP50
2192
WG185HEDP75 WG185HEDP100 WG185HEDP125
2193
2194
2195
12.0 lbs
86.4 gal
50,000
18.0 lbs
148 gal
75,000
24.0 lbs
162.4 gal
100,000
30.0 lbs
224.8 gal
125,000
Tank #1 Resin Quantity - Cubic Feet
1.0 ft
1.50 ft
2.0 ft
2.5 ft
Tank #2 Resin Quantity - Cubic Feet
Tank Size
Tank Jacket / Media Loaded
Brine Tank / Cabinet Size (Inches)
Salt Storage Capacity
Flow Rate @ 15 psi Pressure Drop
Flow Rate @ 25 psi Pressure Drop
Back Wash Flow Rate
Shipping Weight
Regeneration Type
Plumbing Connections
Resin Type
Electrical Requirements
Water Temperature
Water Pressure
1.0 ft
9x48
Yes
1.50 ft
10x54
Yes
2.0 ft
12x52
No
2.5 ft
13x54
No
20.3 x 37.4
23.0 x 40.5
23.0 x 40.5
23.0 x 40.5
350 lbs
7.2 gpm
10.0 gpm
2.0 gpm
184 lbs
420 lbs
420 lbs
420 lbs
7.4 gpm
9.0 gpm
9.2 gpm
10.1 gpm
11.9 gpm
12.1 gpm
2.4 gpm
3.5 gpm
4.0 gpm
201 lbs
244 lbs
262 lbs
Counter Current / Up Flow
Includes 3/4” 90°Elbows & 1” Straight NPT
Canature 8% High Capacity Ion Exchange Resin
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Water Softeners & Filters
45
185 NeutraSoft Two Tank
Water Conditioning System
Neutralize Corrosiveness & Remove
Hardness to Protect Fixtures, Pipes &
Appliances
Acidic waters on contact slowly dissolve the Calcite media
contained in the first tank to raise the pH which reduces the
potential leaching of copper, lead and other metals typically
found in plumbing systems.
As the Calcite neutralizes the water, it will increase the hardness of the water. The second tank contains cation exchange
resin to remove the hardness leaving you with pH balanced,
luxuriously soft water.
Features:
0 Economical two tank system is operated using one control valve. Simplifies installation and lowers cost.
0 Dome hole neutralizing tank allows for easy replenishment of consumable calcite media
0 Exclusive WG 185UF Series control valve with reliable
electronic sensors, piston, seals and spacer technology
0 High-efficiency upflow regeneration for ultimate salt
savings and softer water
0 Time saving quick connect fittings for faster, easier
0 Integrated turbine meter
0 48 hour self charging battery back-up keeps time-of-day stored while program settings are kept in permanent memory
0 Large user friendly color display shows time of day, total remaining capacity, and flow
indication
installation
0 Simple electronics and programming.
0 Factory installed one-piece bypass with incorporated
0 Lifetime Warranty on NSF Certified tank
meter
0 Seven year warranty on NSF Certified control 0 Fully adjustable cycle times
valve
0 Meter Immediate, Meter Delayed, Meter with Day
PLATINUM
Override
Specifications
Service Flow Rates
Normal
Peak
Backwash Flow Rate
WG185HNU15
2196
5.0 gpm
8.0 gpm
5.0 gpm
Filter Media Volume - Cubic Feet
1.5 ft
Resin Quantity - Cubic Feet
Tank Size
Tank Jacket / Media Loaded
Brine Tank / Cabinet Size (Inches)
Salt Storage Capacity
Shipping Weight
Regeneration Type
Plumbing Connections
Resin Type
pH Adjustment Media
Electrical Requirements
Water Temperature
Water Pressure
1.5 ft
10x54
No
18.1 x 34.5
240 lbs
311 lbs
Counter Current / Up Flow
Includes 3/4” 90°Elbows & 1” Straight NPT
Canature 8% High Capacity Ion Exchange Resin
Canature Calcite
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Dome hole port on
tank allows for easy
replenishment of
Calcite neutralizing
media
Reverse Osmosis
Ultra Filtration
Under Sink Filtration
Designer Faucets
& Accessories
Aqua Flo Platinum QCRO & QCUF Drinking
Water Systems
Customized Drinking Water
PLATINUM
Water conditions can vary even in the same community.
The Aqua Flo Platinum QCRO System can be configured
to meet your specific requirements. There are ten interchangeable filters with a variety of treatment options that
can be tailored to local water conditions, so your water is
the best it can be.
If you’re concerned about RO reject water or RO
drain line makes installation difficult, we offer
UltraFiltration (UF).* The UF does not have a drain
line to run, your cost is lesser than RO and there is
no waste.
A
B
C
D
Quick glance on how Aqua Flo Platinum QCRO and QCUF works on water
The innovative QC twist and lock design makes service
simple. Twist off the old cartridge and twist on the new.
No messy sump removal. Aqua Flo Platinum HP systems
make drinking water better and life easier.
A Sediment Filters. Screens out sediments and particles.
B Carbon Filters. Improve water’s taste and odor, including chlorine odor reduction.
C Reverse Osmosis or Ultra filtration. Reverse Osmosis Membrane reduce dissolved substances.
Several membranes capacities are available. Ultra Filtration membrane reduce undissolved solids down
to 0.1 Micron
* Check with water treatment specialist to recommend you an
RO or UF system depending on your untreated water quality.
D Several filter options are available depending on your local conditions and requirements.
“The innovative QC
Standard System Specifications*
Easy maintenance of service
components including line
check valve and autoshut off
twist and lock
design makes
service simple.
”
*Customized systems available upon request.
Conditions for Use
** Nephelometric Turbidity Unit
*** Silt Density Index: Value
stated in SDI units
† Manufacturer’s output specification only with inlet conditions
of 345 kPa (50 psig), 25°C (77°F),
going to atmosphere.
48
Drinking Water Systems
15.8”
14.5”
4.7”
13.1”
Notes:
* Pressure Regulator is recommended for feed water
pressures exceeding 552 kPa
(80 psig). The performance of
a reverse osmosis membrane
is highly dependent upon
pressure,
temperature and TDS. The actual volume of product water and
rejection percentage will vary
with differences from the test
conditions that membrane
ratings are based upon. These
drinking water systems are
not intended to be used for
the treatment of water that is
microbiologically unsafe or of
unknown quality.
Storage tank capacity is dependent on pressure. Example:
witha 7 psi precharge, the
drawdown volume is 2.16 gal
at 60 psi,
1.79 gal at 40 psi for the storage
tank shown
2.5”
Drinking Water Systems
49
Filter Cartridge and Single Stage Standalone System Specifications
Aqua Flo Platinum 1240 Series
Aqua Flo Platinum 1240’s advanced reverse osmosis drinking water systems are a natural and economical solution
for providing your family with high quality drinking water. With a space-saving ultra slim profile, the system tucks
neatly under your kitchen sink providing bottled water quality right from your very own tap.
All systems are backed by a two year limited warranty. The Smartap® water quality monitor found on the Push Button designated models is backed by a five year limited warranty.
All models feature:
0 Simple snap fit cover for ease of service
0 High quality reverse osmosis membrane
0 New slim profile with integrated mounting 0 75 gallons per day
* May vary depending on water quality
** Single Stage Standalone System Port Connection Size - 1/4” Quick Connect
RO Membrane
bracket for easy, space saving installation
0 Sediment pre-filtration
0 Quick connect fittings
0 Pre & Post Carbon block filtration
0 Color coded tubing for ease of installation
0 3/8” tubing from RO to tank and faucet for 0 Plastic 3.0 gal Storage Tank
higher flow
0 Chrome faucet
PART #
DESCRIPTION
Aqua Flo Platinum QCRO (Quick Change) Reverse Osmosis
1340302-60
QCRO4V-50 4 STAGE, 50GPD, METAL TANK, STD CHROME AG FAUCET
1340302-60-A
QCRO4V-50 4 STAGE, 50GPD, METAL TANK, 50 MICRON CARBON, STD CHROME AG FAUCET
1340302-60-D
QCRO4V-50 4 STAGE, 50GPD, METAL TANK, DELUXE CHROME AG VS888 FAUCET
1340303-60
QCRO4V-75 4 STAGE, 75GPD, METAL TANK, STD CHROME AG FAUCET
1340303-60-A
QCRO4V-75 4 STAGE, 75GPD, METAL TANK, 50 MICRON CARBON, STD CHROME AG FAUCET
1340303-60-D
QCRO4V-75 4 STAGE, 75GPD, METAL TANK, DELUXE CHROME AG VS888 FAUCET
4VTFC75GPB
4VTFC75G
NOTE: All units ship with Plastic storage tank.
Aqua Flo Platinum QCUF (Quick Change) Ultra Filtration
1340201-60
QCUF 4 STAGE, ULTRAFILTRATION, STD FAUCET
1340201-60-D
QCUF 4 STAGE, ULTRAFILTRATION, DELUXE CHROME AG VS888 FAUCET
1340201-60-A
QCUF 4 STAGE, ULTRAFILTRATION, STD FAUCET, 50 MICRON CARBON
1340201-60-A-D
QCUF 4 STAGE, ULTRAFILTRATION,DELUXE CHROME AG VS888 FAUCET, 50 MICRON CARBON
PLATINUM
1340201-60-A-D-S QCUF 4 STAGE, ULTRAFILTRATION,DELUXE BRIGHT NICKEL AG VS888 FAUCET, 50 MICRON CARBON
Aqua Flo Platinum QC Single Filters (c/w Mounting Bracket)
41407001-14
SEDQC1/4 SEDIMENT FILTER
41407002-14
CBQC1/4 CARBON BLOCK FILTER
PART #
41407006-14
CB50QC1/4 CARBON BLOCK FILTER - 50 MICRON
41407004-14
GACQC1/4 GAC CARBON FILTER
Aqua Flo Platinum 1240 Series Reverse Osmosis Drinking Water Systems
41407007-14
PHQC1/4 pH BOOSTER FILTER
41407005-14
UFQC1/4 ULTRA FILTRATION (HOLLOW FIBRE) MEMBRANE
41407009-14
CB1QC1/4 CARBON BLOCK FILTER - 1 MICRON
41407010-14
SCALEQC1/4 SCALELESS FILTER
DESCRIPTION
1240203-60
4VTFC75G
1240303-60
4VTFC75G - PB
1240202-60A 4VTFC50G, 50 MICRON CARBON BLOCK
Aqua Flo Platinum 1240 Series Replacement Cartridges & Membranes
41407001
SEDIMENT FILTER
41400076
SEDIMENT/CARBON ‘DUAL PURPOSE’ FILTER FOR 3 VESSEL MODELS ONLY, BLUE
CAP
41407002
CARBON BLOCK FILTER
41400008
STRING WOUND SEDIMENT FILTER FOR 4 VESSEL MODELS ONLY, BLACK CAP
41407006
CARBON BLOCK FILTER -50 MICRON
41407004
GAC CARBON FILTER
41407007
pH BOOSTER FILTER
41400009
PRE-CARBON FOR 4 VESSEL & POST CARBON FOR 3 & 4 VESSEL MODELS, BLUE
CAP
41407005
UF (HOLLOW FIBER) MEMBRANE
33001068
25 GPD TFC MEMBRANE, YELLOW CASE, BLACK TAPE, FOR 1230/1240 SERIES
41407009
CARBON BLOCK - 1 MICRON
33001033
50 GPD TFC MEMBRANE, YELLOW CASE, BLACK TAPE, FOR 1230/1240 SERIES
41407010
SCALELESS
33001056
75 GPD TFC MEMBRANE, YELLOW CASE, BLACK TAPE, FOR 1230/1240 SERIES
41407003
RO MEMBRANE 50 GPD
41407008
RO MEMBRANE 75 GPD
41407011
ANNUAL REPLACEMENT FILTER KIT FOR QCRO (2 SEDIMENT / 3 CARBON BLOCK)
Aqua Flo Platinum Quick Change Replacement Filters
*Note: Two Carbon filters required on most standard RO and UF system configurations
50
Drinking Water Systems
Drinking Water Systems
51
Aqua Flo Platinum 1240 Series
Aqua Flo Reverse Osmosis Systems
Features:
Conditions for Use
0 Four stage filtration: 5 micron sediment pre-filter, 10
micron coconut carbon pre & post filters, quick
connect 75 GPD NSF Certified TFC membrane
0 Bayonet-style 1/4 turn quick connect disposable
cartridges with auto water shut-off
0 Includes faucet and 3.0 gallon NSF Certified storage Notes:
• 1 Pressure Regulator is recommended for feed water pressures exceeding 552 kPa (80 psig).
• The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection percentage will vary with differences from the test conditions that membrane ratings are based upon.
• These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.
• Storage tank capacity is dependent on pressure. Example: with a 7 psi precharge, the drawdown volume is 2.16 gal at 60 psi, 1.79 gal at 40 psi for the storage
tank shown.
• This product is manufactured under one or more of the following U.S. patents: 5,045,197; 5,057,212; 5,221,473
0 3/8” tubing for high product flow rate from tank to faucet
0 Quick connect fittings, inlet saddle and drain saddle, Fast, Simple & Sanitary
Maintenance!
Quick connect disposable cartridges and
membrane make for easy ‘Do-It-Yourself’
maintenance. With built in auto water shut-offs
there is no need to turn off the water supply
prior to maintenance.
Booster Pump ( R/O feed water line
booster pump)
Raises the water pressure and maintains it at the ideal level
for the system to operate at maximum efficiency. Recommended for use on supplies with low pressure or high
concentrations of total dissolved solids (TDS). The pump is
self-priming and whisper-quiet. It runs on a 24VAC transformer (included) from a standard 120VAC electrical outlet.
Because traditional systems require the
disinfection of the permanent housing canisters
and involve more direct human contact,
maintenance can take as much as an hour
and if not done properly can result in a
contaminated system.
System includes: Flexible mounting plate, quick connect
fittings and a pressure shut-off switch.
tank. (Designer faucets available)
labelled tubing for easy installation
0 Booster pump model with inlet solenoid raises water pressure to ideal level for maximum efficiency.
Recommended on rural supplies with low pressure
or high TDS
0 Two year warranty (excluding consumable filter
cartridges and RO membrane)
0 Dimensions:
13”w x 141/2”h x 41/2 d No Pump
141/4”w x 161/2”h x 61/4”d Pump Model
Change filters in
seconds without
turning off water!
No tools required!
Disposable cartridges changes in seconds and
reduce contamination risk!
Item #: 70030001
Model: RO Booster with Pressure Switch and
Transformer for 25 to 75 Gallon per
day Systems
PART #
DESCRIPTION
Aqua Flo 475 Series Drinking Water Systems
20010023 475 PRO Series RO system
20010024 475 PRO Series RO system w/BP
20010025 475 PRO Series RO system (Air gap faucet)
20010026 475 PRO Series RO system w/BP (Air gap faucet)
Replacement Filters & RO Membrane
65010086 SED-10 (Sediment Filter - 5 Micron)
65010088 COC-10 Coconut Carbon (Pre & Post 10 Micron)
“
Raises the water
pressure and maintains
it at the ideal level ...
”
52
70010014 RO Membrane 75 GPD TFC
Booster
Pump
Model
65010087 CB-10 Carbon Block (Optional Filter - 10 Micron)
65010089 GAC-10 Granular Carbon (Optional Filter)
Feed Water Guidelines
Maximum TDS
2000 ppm
Hardness
<7gpg
Iron (Fe)
<0.2ppm
Manganese (Mn)
<0.05ppm
Hydrogen Sulfide
0.0ppm
Turbidity
<1.0NTU
Feed Water Pressure
40-100psi
Temperature
40-100°F
pH Range
3.0-11.0
Drinking Water Systems
53
Aqua Flo Under Sink
Filtration Systems
Aqua Flo Economy Reverse Osmosis System
475QC Filters
Features:
0 Heavy duty glass filled polypropylene
The 475 Quick Change Filter Series offers 3, 2
& Single Stage options to provide solutions
for a variety of water problems including
sediment, rust, bad taste & odor.
construction provides double the strength,
toughness & durability compared to most other RO’s which are typically constructed with ABS.
0 TFC 75 GPD reverse osmosis membrane provides Features & Benefits:
up to 99% Total Dissolved Solids (TDS) rejection
0 Pre-filters 10’’ five (5) micron Spun Polypropylene
0 Low cost alternative to RO
0 No reject water (100% water used)
Sediment Cartridge and 10’’ Activated Carbon Cartridge
0 Leaves nutrients in water
0 Post filter: 10’’ Activated Carbon Cartridge
0 Ultra Filtration on system removes lead,
0 Choose from air gap or non-air gap chrome
VOC (pesticides, herbicides, chemicals),
THM, chlorine, taste and odor and
sediment down to 0.2 microns.
PART #
Aqua Flo Economy Drinking Water System
0 Installation is quick and easy
0 Quick change bayonet-style disposable
cartridges are more sterile and can be
changed in seconds
0 Includes standard chrome faucet, inlet
0 Dimensions:
• 3 stage - 11.8”w x 14.3”h x 4.5”d
• 2 stage - 6.3”w x 13.4”h x 3.9”d
• 1 stage - 2.8”w x 12.4”h x 3.2”d
20010030
4 stage 75 GPD RO system
20010031
4 stage 75 GDP RO system w Booster Pump
20010034
4 stage 75 GPD RO system (Air Gap)
20010035
4 stage 75 GDP RO system w Booster (AirGap)
Replacement Filters & RO Membrane
Change filters in seconds
without turning off water!
No tools required!
saddle valve, and 5ft ¼” tubing
0 No storage tank required
DESCRIPTION
Item #
Description
26081
5 Micron Pre-Filter - 10” Sediment
26273
Pre & Post Filter - 10” Carbon
92022
75 GPD TFC Membrane
plated faucets
0 3.0 Gallon NSF Certified plastic storage tank
0 3/8’’ outlet tubing for higher flows
0 Automatic shut-off valve
0 Exclusive serviceable check valve eliminates spring ‘chatter’ noise common in other RO’s
0 Quick connect fittings for ease of installation
0 Powder coated bracket
0 Dual purpose wrench for use on membrane cap and filter housing
0 Dimensions:
Booster Pump Model also includes:
15.0”w x 14.5”h x 6.1”d No Pump
15.0”w x 17.7”h x 6.9”d Pump Model
0 Pump mounted on RO to maintain constant water
pressure
0 Raises water pressure to ideal level for maximum
efficiency
0 Use on rural supplies with low pressure or highTDS
475 QC Series Filter Systems
PART #
DESCRIPTION
Filter 1
Filter 2
Filter 3
20010201
475QC-3 TRIPLE STAGE ULTRA FILTER
SED
UF
COC
20010202
475QC-2 DOUBLE STAGE DUAL FILTER
SED
COC
20010203
475QC-1C SINGLE STAGE COCONUT CARBON FILTER
COC
20010204
475QC-1S SINGLE STAGE SEDIMENT FILTER
SED
20010205
475QC-1G SINGLE STAGE GAC FILTER
GAC
0 Exclusive Auto Flush feature extends membrane life
0 Self-priming and whisper quiet
0 24VAC transformer (included) from a standard 120VAC electrical outlet
0 Flexible mounting plate, quick connect fittings and
pressure shut-off switch
475 QC Series Replacement Filters
PART #
DESCRIPTION
MICRON
FLOW
RATE
CAPACITY
(GALLONS)
65010086
SEDIMENT FILTER SED-10 BLUE (475 Q SERIES)
5
1 GPM
900
65010088
CARBON FILTER COC-10 PURPLE (475 Q SERIES)
10
1 GPM
1,500
65010089
CARBON FILTER GAC-10 YELLOW (475 Q SERIES)
-
0.7 GPM
1,500
65010093
ULTRA FILTER UF-10 BLACK (475 Q SERIES)
0.2
0.7 GPM
1,500
#80010058 JG Undersink 3/8” connection angle stop / shut off
#80010059 JG Undersink 1/4” connection angle stop / shut off
54
Drinking Water Systems
Drinking Water Systems
55
Reverse Osmosis Storage Tanks
Designer Faucets
Flexwave is a line of RO accumulators and storage tanks
for residential and light commercial applications.
Designer RO faucets are a stylish addition to any
kitchen. The NSF Certified lead-free ceramic disk
faucets are available in many attractive finishes
to coordinate with any decor. The faucets feature
lead-free plastic water passages and lead-free
brass gooseneck spouts that swivel 360 degrees for
ease of use.
Flexwave tanks are made in the USA and built to comply
wiith NSF/ANSI Std 61. All Flexwave tanks have a 5 year
warranty.
PART #
DESCRIPTION
87588
Faucet, VS888, Antique Brass
87589
Faucet, VS888, Antique Wine
87581
Faucet, VS888, Brushed Nickel
70040052
Faucet, VS888, Oil Rubbed Bronze
87580
Faucet, VS888, Polished Chrome
87585
Faucet, VS888, Satin Nickel
87584
FAUCET, VS888, BLACK
70040045
Faucet, VS905, Antique Brass
70040054
Faucet, VS905, Antique Wine
87583
Faucet, VS905, Brushed Nickel
87587
Faucet, VS905, Oil Rubbed Bronze
87582
Faucet, VS905, Polished Chrome
87586
Faucet, VS905, Satin Nickel
87591
Stand, Display
92710
Faucet Colour Sample Display
Specifications
Height
Spout Reach
Mounting Hole Diameter
Base Diameter
# 70031000 Quick Connect Ball Valve Assembly
reduces 1’’ tank connection to John Guest Quick
Connect RO ball valve 1/4’’ to 3/8’’ tubing.
VS888
VS888
VS905
11.5” (292mm)
11.075” (281.32mm)
5.7” (146mm)
4.75” (120mm)
1/2” (12.5mm)
1/2” (12.5mm)
1.73” (44mm)
1.76” (44.8mm)
Connection
1/4” compression nut
fitting
1/4” compression nut
fitting
Operating Pressure
125 PSI/8.3BAR
125 PSI/8.3BAR
Flow Rate
1.0 gpm/3.785lpm @35
PSI/2.32BAR
1.0 gpm/3.785lpm @35
PSI/2.32BAR
Temp Rating
Warranty
4°C/40°F to 70°C/158°F
4°C/40°F to 70°C/158°F
2 Years
2 Years
* All mounting hardware included. A 3/8” quick connect faucet adapter fitting
(#80010017) can be purchased seperately.
VS905
Larger sizes available. Please contact Customer Service for details.
Tank precharge 20 PSI
Maximum Pressure 125 PSI
Maximum working temperature, internal & external 120F
Color Sample Display
#70040059
Materials of Construction
Tank top and bottom domes injection molded copolymer polypropylene. Shell extruded Polypropylene.
Outer shell composite construction with fiberglass coated with epoxy resin. Base is injection molded
high-impact ABS. 100% butyl diaphragm connected to a copolymer polypropylene bottom water
chamber which allows for complete evacuation of the water chamber.
Dimensions & Capacities
Model
Item #
Total Tank Volume
FWRO15
FWRO22
92372
92374
Gallons
15 Gal
22 Gal
Litres
56.8
83.3
Height
In
25.6
34.1
Cm
65
87
Diameter
In
16.5
16.5
Cm
42
42
Connection
In
1” NPT
1” NPT
Total Weight
Lbs
19
25
Kilos
8.6
11.3
Quick Sizing Chart
Model
Item #
Total Tank Volume
FWRO15
FWRO22
92372
92374
Gallons
15 Gal
22 Gal
56
Drinking Water Systems
Litres
56.8
83.3
Total Drawdown
10/50
10/60
Gallons Litres Gallons Litres
9.3
35.2
10
37.9
13.6
51.5
14.7
55.6
Drinking Water Systems
57
RO Booster Pumps
PAB8800 Series High Flow Booster Pump
Key Operational Benefits:
0 Boosts pressure 40 to 120 psi (adjustable)
0 Used with membranes 50 to 120 GDP
0 15,000+ operating hours (estimated)
0 Quiet – less than 52 DBA
0 Can run dry without damage
Features:
0 Toughest, most durable pump on the market
0 More flow at extremely low inlet pressures
0 Adjustable max. outlet psi (regardless of feed
pressure)
0 New motor venting system to remove moisture
0 Expels trapped air (no more air locks)
0 Can be mounted with pump head up or
horizontal
0 EMI/RFI electronic noise suppression
0 100% final performance tested
0 Available in 12VDC and 24VDC
Aquatec 5800 Demand Pump
OPERATION: The 5800 pump can draw water from a holding
tank and pressurize it, or boost the pressure from a low pressure
source. They are designed to operate intermittently, but most
versions can run continuously for several hour intervals. The
pumps can be operated in demand mode controlled by an
integral pressure switch, or in delivery mode controlled by an
external power switching device. An integral bypass may be used
to limit pressure.
POWER: 115V PSI: 60 GPM: 0.9
MOUNTING: A steel mounting base with four hollow rubber
grommets is standard and included at no extra cost. The pump
may be mounted in any position.
FITTINGS: The 5800 pump is offered with integral John Guest
style quick connect fitting for 3/8” OD semi rigid tubing.
KemFlo MD1050 Booster Pump
DESCRIPTION: 110/230 VAC, 75 GPD Booster pump 1.0 L.min,
suitable for applications with 24VDC transformer
SPECIFICATIONS: Kemflo MD Series booster pump with 3/8”
FNPT, made from NSF grade material high power flow rate and
quality.
Meet ROHS standard.
Item #
92325
92317-1
92341
70030035
58
PURA
Ultraviolet
Disinfection
Systems
Model
KF - BOOSTER PUMP - MD1050
AQUATEC MODEL PAB8800 BOOSTER PUMP
AQUATEC MODEL PD5800 DEMAND PUMP
RO-75 BOOSTER PUMP
Drinking Water Systems
Drinking Water Systems
59
PURA™ Ultraviolet Disinfection Systems
PURA™ Gen 5 Residential Systems:
Genesis H2O: Ultraviolet Disinfection System
PURA Ultraviolet Disinfection Systems offer a broad range of solutions with features and flow rates to satisfy most
applications.
The PURA UVB, UV20 and UVBB models offer a combination of UV disinfection and filtration in convenient, bracket
mounted, all-in-one packages.
The PURA Gen 5 & 6 Series offer more advanced, axial-flow stainless steel systems with advanced monitoring.
The AB UV offers an entry level stainless steel UV system for lower price points.
The UV1-EPCB and UV ADDON Series offer smaller solutions for lower flow rate applications.
A Security System For Your Water
UV technology provides additional security for your
water supply. It is proven to control microbiological
(bacteria & virus) issues in water including E.coli,
Cryptosporidium, and Giardia Lamblia without the use
of chemicals.
Gen 5 Residential Systems
Features:
0 Five models available (Gen5-3, 6 , 10, 15 & 20)
0 Colour user interface with full diagnostics and
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Designed & manufactured to ASME pressure vessel
standards
0 Axial flow, 316L stainless steel reactor, polished
reactors with integral sensor port to allow for
sensor upgradeability in the future (comes standard
with visual glow plug)
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
0 User friendly bayonet style lamp connector (Quick ¼
turn removal. No extra tools required.)
0 Reliable, industry proven low pressure (LP) coated
UV lamps with ceramic bases for durability and a
9000 hour life (1 year)
0 Constant current electronic controller (one
These systems are for the supplemental treatment of disinfected drinking water
which has been treated or other drinking water which has been tested and
deemed acceptable for human consumption by the state or local health
agency having jurisdiction. These systems are designed to reduce normally
occurring nonpathogenic nuisance organisms and is not intended for the
treatment of contaminated water.
controller for all systems) in a splash-proof case
0 Warranty (refer to Owner’s Manual for complete
details including conditions & exclusions):
• Reactor Chamber – Ten (10) Year Limited
• Electronics – Three (3) Year Limited
• UV Lamps – One (1) Year Limited
• Quartz Sleeves – One (1) Year Limited
PURA GEN 5
Item #
Model
40030001 UV STERILIZER PURA GEN 5-3 (3 gpm)
Conditions For Use - All Lines
40030002 UV STERILIZER PURA GEN 5-6 (6 gpm)
40030003 UV STERILIZER PURA GEN 5-10 (10 gpm)
40030004 UV STERILIZER PURA GEN 5-15 (15 gpm)
40030005 UV STERILIZER PURA GEN 5-20 (20 gpm)
The contaminants and other substances reduced by this water treatment
device are not necessarily in your water. In addition, the presence of certain
contaminants in your drinking water does not necessarily pose a health risk.
U.S. Patent #4,971,687
60
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
Ultraviolet Disinfection Systems
61
Sample
Screens
PURA™ Gen 6 Residential Systems
A Security System For Your Water
UV technology provides additional security for your
water supply. It is proven to control microbiological
(bacteria & virus) issues in water including E.coli,
Cryptosporidium, and Giardia Lamblia without the use
of chemicals.
Gen 6 Residential Systems
Features:
0 Four models available (Gen 6-6 , 10, 15 & 20)
0 True 254nm Teflon® based UV sensor continuously
measures UV output and visually displays output via
controller
0 Colour user interface with full diagnostics and
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Axial flow, 304 stainless reactors
0 Designed & manufactured to ASME pressure vessel
standards
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
0 User friendly bayonet style lamp connector (Quick ¼
* See price list for specific item numbers
turn removal. No extra tools required.)
0 True gland seal retaining nut with positive stop
0 Reliable, industry proven low pressure (LP) coated
Options
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H5 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all PURA Gen 5
units.
Solenoid Module
Used to power a
remote normally
closed solenoid
valve (not included). Solenoid valve
will close on lamp
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
0 Constant current electronic controller (one
REPLACEMENT PARTS
System
Pura Gen 5-3
Pura Gen 5-6
Pura Gen 5-10
Pura Gen 5-15
Pura Gen 5-20
Lamps
RL-290
#40040013
RL-470
#40040014
RL-820
#40040015
RL-999
#40040017
RL-850
#40040016
Sleeves
Controller
RQ-290
RC-B56.01
RQ-470
RC-B56.01
RQ-820
RC-B56.01
RQ-999
RC-B56.01
RQ-850
RC-B56.01
#40040040
#40040043
#40040045
#40040048
#40040046
UV lamps with ceramic bases for durability and a
9000 hour life (1 year)
#40040066
#40040066
#40040066
#40040066
controller for all systems) in a splash-proof case
0 Warranty (refer to Owner’s Manual for complete details including conditions & exclusions):
• Reactor Chamber - Ten (10) Year Limited
• Electronics – Three (3) Year Limited
• UV Lamps – One (1) Year Limited
• Quartz Sleeves – One (1) Year Limited
• UV Sensors – One (1) Year Limited
#40040066
PURA GEN 6
Item #
Model
40030006 UV STERILIZER PURA GEN 6-6 (6 gpm)
40030007 UV STERILIZER PURA GEN 6-10 (10 gpm)
40030008 UV STERILIZER PURA GEN 6-15 (15 gpm)
40030009 UV STERILIZER PURA GEN 6-20 (20 gpm)
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
62
Ultraviolet Disinfection Systems
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
Ultraviolet Disinfection Systems
63
Sample
Screens
PURA™ Gen H5 Residential Crossover High
Flow Systems
A Security System For Your Water
UV technology provides additional security for your
water supply. It is proven to control microbiological
(bacteria & virus) issues in water including E.coli,
Cryptosporidium, and Giardia Lamblia without the use
of chemicals.
Gen H5 Residential Crossover
High Flow Systems
Features:
0 Five models available (Gen H5-5, 10, 15, 25 & 40)
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
0 Colour user interface with full diagnostics and
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Axial flow, 316L stainless steel reactor, polished
reactors with integral sensor port to allow for sensor upgradeability in the future (comes standard with visual glow plug)
0 Designed & manufactured to ASME pressure vessel
standards
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
0 User friendly bayonet style lamp connector (Quick ¼
* See price list for specific item numbers
turn removal. No extra tools required.)
0 True gland seal retaining nut with positive stop
Options
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H5 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all PURA Gen 6
units.
Solenoid Module
Used to power a
remote normally
closed solenoid
valve (not included). Solenoid valve
will close on lamp
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
REPLACEMENT PARTS
System
Pura Gen 6-6
Pura Gen 6-10
Pura Gen 6-15
Pura Gen 6-20
Lamps
RL-470
#40040014
RL-820
#40040015
RL-999
#40040017
RL-850
#40040016
Sleeves
RQ-470
#40040043
RQ-820
#40040045
RQ-999
#40040048
RQ-850
#40040046
Controller
RC-B56.01
#40040066
RC-B56.01
#40040066
RC-B56.01
#40040066
RC-B56.01
#40040066
0 Reliable, industry proven low pressure, high-output
(LP-HO) coated UV lamps with ceramic bases for
durability and a 10,000 hour life
0 Universal input, constant current electronic
controller (one controller for all systems) in a
splash-proof case
0 Warranty (refer to Owner’s Manual for complete details including conditions & exclusions):
• Reactor Chamber – Ten (10) Year Limited
• Electronics – Three (3) Year Limited
• UV Lamps – One (1) Year Limited
• Quartz Sleeves – One (1) Year Limited
PURA GEN H5
Item #
Model
40030010 UV STERILIZER PURA GEN H5-5 (5 gpm)
40030011 UV STERILIZER PURA GEN H5-10 (10 gpm)
40030012 UV STERILIZER PURA GEN H5-15 (15 gpm)
40030013 UV STERILIZER PURA GEN H5-25 (25 gpm)
40030014 UV STERILIZER PURA GEN H5-40 (40 gpm)
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
64
Ultraviolet Disinfection Systems
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
Ultraviolet Disinfection Systems
65
Sample
Screens
PURA™ Gen H6 Residential Crossover
High Flow Systems
A Security System For Your Water
UV technology provides additional security for your
water supply. It is proven to control microbiological
(bacteria & virus) issues in water including E.coli,
Cryptosporidium, and Giardia Lamblia without the use
of chemicals.
Gen H6 Residential Crossover
High Flow Systems
Features:
0 Five models available (Gen H6-5, 10, 15, 25 & 40)
0 True 254nm Teflon® based UV sensor continuously
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
measures UV output via the controller
0 Colour user interface with full diagnostics and
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Axial flow, 316L stainless steel reactor
0 Designed & manufactured to ASME pressure vessel
standards
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
* See price list for specific item numbers
0 User friendly bayonet style lamp connector (Quick ¼
turn removal. No extra tools required.)
0 True gland seal retaining nut with positive stop
0 Reliable, industry proven low pressure, high-output
(LP-HO) coated UV lamps with ceramic bases for
durability and a 10,000 hour life
0 Universal input, constant current electronic
0 Warranty (refer to Owner’s Manual for complete Options
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H5 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all PURA Gen H5
units.
66
controller (one controller for all systems) in a
splash-proof case
Ultraviolet Disinfection Systems
Solenoid Module
Used to power a
remote normally
closed solenoid
valve (not included). Solenoid valve
will close on lamp
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
REPLACEMENT PARTS
System
Pura Gen H5-5
Pura Gen H5-10
Pura Gen H5-15
Pura Gen H5-25
Pura Gen H5-40
Lamps
RL-210HO
#40040018
RL-330HO
#40040019
RL-420HO
#40040020
RL-600HO
#40040021
RL-950HO
#40040022
Sleeves
Controller
RQ-210
RCHO-B56.12
RQ-330
RCHO-B56.12
#40040039
#40040041
#40040074
#40040074
details including conditions & exclusions):
• Reactor Chamber – Ten (10) Year Limited
• Electronics – Three (3) Year Limited
• UV Lamps – One (1) Year Limited
• Quartz Sleeves – One (1) Year Limited
• UV Sensors – One (1) Year Limited
PURA GEN H6
Item #
Model
40030015 UV STERILIZER PURA GEN H6-5 (5 gpm)
RQ-420
RCHO-B56.12
RQ-600
RCHO-B56.12
#40040074
40030017 UV STERILIZER PURA GEN H6-15 (15 gpm)
RQ-950
RCHO-B56.12
40030018 UV STERILIZER PURA GEN H6-25 (25 gpm)
#40040042
#40040044
#40040047
#40040074
#40040074
40030016 UV STERILIZER PURA GEN H6-10 (10 gpm)
40030019 UV STERILIZER PURA GEN H6-40 (40 gpm)
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
Ultraviolet Disinfection Systems
67
Sample
Screens
PURA™ Gen 5 UV/Filter Rack System
A Combination Water System
For Your Entire Home or Cottage
Combining ultraviolet disinfection (UV) with whole-house
filtration provides your home or cottage with clean,
great-tasting water that you can rely on. UV is proven to
control microbiological (bacteria & virus) issues in water
including E.coli, Cryptosporidium, and Giardia Lamblia without the use of chemicals. Combining UV disinfection with
whole-house sediment and/or carbon pre-treatment filters
improves UV performance and the taste, smell and clarity of
your water.
Features:
0 Four models provide a range of flow rate and filter
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
combination options suitable for your specific needs
0 Models for 8 & 13 gpm flow rates
0 All systems include 5 micron sediment removal
pretreatment required for proper UV performance
0 Optional ‘high-flow’ carbon filters to treat bad
tastes and odors
0 Pressure relief, high-flow polypropylene filter
housings
* See price list for specific item numbers
0 Colour user interface with full diagnostics and
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Designed & manufactured to ASME pressure vessel
standards
0 Axial flow, 316L stainless steel polished reactors
designed & manufactured to ASME pressure vessel
standards
Options
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H5 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all GenH6 units.
Solenoid Module
Used to power a
remote normally
closed solenoid
valve (not included). Solenoid valve
will close on lamp
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
REPLACEMENT PARTS
System
Pura Gen H6-5
Pura Gen H6-10
Pura Gen H6-15
Pura Gen H6-25
Pura Gen H6-40
Lamps
RL-210HO
#40040018
RL-330HO
#40040019
RL-420HO
#40040020
RL-600HO
#40040021
RL-950HO
#40040022
Sleeves
RQ-210
#40040039
RQ-330
#40040041
RQ-420
#40040042
RQ-600
#40040044
RQ-950
#40040047
Controller
RCHO-B56.12
#40040074
RCHO-B56.12
#40040074
RCHO-B56.12
#40040074
RCHO-B56.12
#40040074
RCHO-B56.12
#40040074
0 User friendly bayonet style lamp connector (Quick ¼
turn removal. No extra tools required.)
0 Reliable, industry proven low pressure (LP) coated
UV lamps with ceramic bases for durability and a
9000 hour life (1 year)
0 Constant current electronic controller in a
splash-proof case
GEN 5 UV / FILTER RACK SYSTEM
Item #
Model
40030050
UV STERILIZER / FILTER RACK SYSTEM PURA GEN 5 - 8R1
40030051
UV STERILIZER / FILTER RACK SYSTEM PURA GEN 5 - 8R12
40030052
UV STERILIZER / FILTER RACK SYSTEM PURA GEN H5 - 13R2
40030053
UV STERILIZER / FILTER RACK SYSTEM PURA GEN H5 - 13R22
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
68
Ultraviolet Disinfection Systems
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
Ultraviolet Disinfection Systems
69
Sample
Screens
PURA™ ABUV Series Ultraviolet
Disinfection Systems
PURA ABUV Series™
The PURA® ABUV Series is an entry level. Ultraviolet
Water Disinfection System. The system will provide you
with disinfected drinking water for years to come.
These systems have been designed with high quality
construction and innovative features.
Disinfection of water using ultraviolet light at a wavelength at 254nm is a chemical free way of destroying
the DNA of microorganisms rendering them unable to
replicate or cause infection. Installation of the system
is straight forward and simple. Maintenance includes
changing the lamp once a year and cleaning the
quartz sleeve periodically.
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
The PURA® ABUV models are tested and certified by
NSF against Standard 55 for Class B disinfection.
Features:
0 Lamp Failure Visual and Audible Alarm
0 Lamp Change Reminder
0 Countdown Lamp Timer
0 15V / 60Hz North American 3-Prong Grounded Plug
Conditions for Use
Depending on the chemistry of the water to be
disinfected by a PURA® Ultraviolet Water Disinfection
System, additional pretreatment may be necessary.
The following table outlines the basic parameters that
need to be tested and treated should your water fall
outside these parameters. An additional 5 micron
sediment and housing is recommended as a minimum
pretreatment to guard against any large particles
that may mask the ultraviolet light and also assist with
startup procedures.
Options
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-5 UV
controller. The sensor plugs directly
into the controller
and is mounted in
the sensor port
located on all
GenH6 units.
Solenoid Module
Used to power a
remote normally
closed solenoid
valve (not included). Solenoid valve
will close on lamp
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
4-20mA Module Used for signal
transfer to a remote device such
as a data logger or computer)
Dimensions
A inches (cm)
17.32 (44)
23 (58.5)
31.5 (80)
B inches (cm)
2.5 (6.35)
2.5 (6.35)
2.5 (6.35)
C inches (cm)
4.33 (11)
4.33 (11)
4.45 (11.3)
D inches (cm)
21.65 (55)
27.56 (70)
36.61 (93)
Specifications
Item #
8880
8881
8882
Model #
Buv-6
Buv-8
Buv-12
NSF Rated Flow Rate @ 16mJ/
5.5 (20.79) 7.8 (29.48) 12 (45.36)
cm2 @ 70% UVT - usgpm (l/min)
Flow Rate @ 16 mJ/cm2 @
96% UVT - usgpm (l/min)
12 (45.36)
18.8 (71)
Flow Rate @ 30 mJ/cm2 @
96% UVT - usgpm (L/min)
6.4 (24.2)
10 (37.8) 13.9 (52.5)
Flow Rate @ 40 mJ/cm2 @
96% UVT - usgpm (l/min)
4.8 (18.14) 7.5 (28.35) 10.4 (39.31)
Lamp Power (Watt)
21
29
40
Max. Current (Amp)
0.4
0.4
0.5
Inlet and Outlet Size NPT
Weight lbs (kg)
Remote Alarm (Dry Contact) Module Used
for signal transfer to a remote alarm or dry
contacts.
70
Ultraviolet Disinfection Systems
26 (98.28)
1/2”
3/4”
1”
6 (2.67)
8 (3.57)
12 (5.36)
Operating Pressure psi (kpa)
10-100 psi (69-689 kPa)
Operating Temperature Range
36 to 104° F (2 to 40° C)
Electrical
Electrical Plug
100-240V - 50/60Hz
North American
Ultraviolet Disinfection Systems
71
PURA™ Ultraviolet Disinfection Systems
PURA™ Ultraviolet Disinfection Systems
UVB Series™
UV20 Series™
PURA Product’s patented UVB Series is designed to provide
disinfected water at a flow rate of 2 gallons per minute. In
addition to disinfection, water is filtered through our 0.5 micron
Extended Pass Carbon Block (EPCB) filter.
Our double and triple models provide you with additional filtration with sediment and activated carbon filters.
This compact All-in-One system installs with ease and can be
used anywhere that clean, clear, good tasting disinfected water is needed. It is ideal for point-of-use applications like under
the kitchen sink, office water coolers, water
vending machines, boats, recreational vehicles, etc.
Features:
0 Electronic lamp indicator (LED)
0 Standard voltage 115V
Options:
The PURA Product’s UV20 Series is designed to provide
disinfected water at a flow rate of 8 - 10 gallons per minute.
This system is ideal for whole house water treatment.
In addition to disinfection, the double and triple models
provide filtration for the removal of sediment and chemical
contaminants.
This ultraviolet water treatment system makes a perfect
companion to water softeners, distillers, reverse osmosis
and ozone systems. The UV20 Series has proven to be
PURA Product’s most popular product line and has created
an industry standard in whole house disinfection.
Features:
0 Electronic lamp indicator (LED)
0 Standard voltage 115V
0 220V/50Hz (2-Prong Euro plug)
Options:
0 12V DC
0 220V/50Hz (2-Prong Euro plug)
0 Lamp Out Circuit (LOC) - (normally open) Safety
0 12V DC
monitor for alarm
0 Lamp Out Circuit (LOC) - (normally closed) Safety
monitor for solenoid shut off
0 Three year warranty except on electrical components which are covered for a period of one year.
0 Lamp Out Circuit (LOC) - (normally open) Safety
0 Lamp Out Circuit (LOC) - (normally closed) Safety
monitor for solenoid shut off
0 Three year warranty except on electrical components Specifications & Performance UVB Series
monitor for alarm
which are covered for a period of one year.
Specifications & Performance UV20 Series
Note: (1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
Note: (1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
72
Ultraviolet Disinfection Systems
Ultraviolet Disinfection Systems
73
PURA™ Ultraviolet Disinfection Systems
PURA™ Ultraviolet Disinfection Systems
UV BigBoy™ Series
UV1-EPCB Series™
The UV BigBoy Series is the most versatile
commercial ultraviolet disinfection system
on the market today. This 15 to 60 GPM series is manufactured with versatility in mind,
and is virtually unlimited in the possible filter
configurations and manifold sequences.
The series is designed with the same traditional style that PURA has made an industry
standard - worldwide.
PURA Product’s UV1-EPCB Series is a bright example of PURA
Product’s patented All-In-One concept. This product
combines both ultraviolet disinfection with carbon
filtration all in a very attractive and compact system.
One advantage of the UV BigBoy Series is
the convenient manifold mounting rack.
The rack can be used to configure up to
four UV chambers in parallel or in series. This
allows the user to achieve either a higher
UV dosage or higher flow rate (up to 60
GPM).
Features:
This mounting rack configuration provides
easy access for cleaning and maintenance to the individual units without the
need to shut down the entire water distribution line. The standard LED lamp monitor
provides a visual verification the lamp is in
operation.
The UV BigBoy Series, with its capacity,
versatility and cost, to be the world’s most
flexible, complete water disinfection
system in its class.
The UV-1 Series is rated for 1 gallon per minute and uses either
a 0.5 micron (EPCB) carbon block filter or a 10 micron (EPCB
10) carbon block filter. This easy to install system can be used
as a stand alone or in conjunction with other water
treatment products.
Features:
0 Electronic lamp indicator (LED)
0 Standard voltage 115V
Options:
0 220V/50Hz (2-Prong Euro plug)
0 12V DC
0 Compact Size
0 Standard voltage 115V
Options:
0 220V/50Hz (2-Prong Euro plug)
0 12V DC
Specifications & Performance UV1-EPCB Series
0 Lamp Out Circuit (LOC) - (normally open) Safety
monitor for alarm
0 Lamp Out Circuit (LOC) - (normally closed) Safety
monitor for solenoid shut off
0 Three year warranty except on electrical components which are covered for a period of one year.
Specifications & Performance UV BigBoy Series
Notes: EPCB refers to Extended Pass Carbon Block filter
(1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
UV ADDON Series™
PURA Product’s UV ADDON Series is designed to be an easy addition to
water treatment systems that require ultraviolet disinfection (RO systems,
holding tanks, water dispensers, recirculating systems and more). The
ADDON systems are available with a 1 GPM or 3 GPM flow rate. They
are constructed using a 304 grade stainless steel body
with a molded head that includes 3/8” quick connect fittings on the
inlet/outlet. This versatile system also includes a heavy duty mounting
bracket, but will also fit standard 2” RO mounting clips. The UV ADDON
Series can be used almost anywhere and is equipped with a unique
power supply that makes installation simple, space requirements mini-
Features:
0 3/8” quick connect fittings
0 Standard voltage 115V
Options:
0 220V/50Hz (2-Prong Euro plug)
Specifications & Performance UV BigBoy Series
0 12V DC
Specifications & Performance UV ADDON Series
Notes: (1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
(2) Empty sumps on UVBB-Rack systems can be filled with a wide variety of optional cartridges.
74
Ultraviolet Disinfection Systems
Ultraviolet Disinfection Systems
75
Aqua Flo Point-of -Use Water Filters
WaterGroup offers a wide range of point-of-use filtration solutions.
Aqua Flo Economy - A full line of quality POU products at a great price point.
There are two considerations when
making a choice of filtration systems:
1) type of housing
2) type of Filter Cartridge
Housings:
Housings come in different sizes, colors, materials of
construction and offer different features. Here is a quick
breakdown:
0 Size – You need to consider the constraints of your install space first but in general the larger the diameter and longer the housing the more flow rate it can handle and higher removal capacity of the cartridge meaning less frequent cartridge changes.
0 Color – Housings are usually transparent or opaque. Transparent housing allow for visual inspection when determining to change the cartridges. They are not suitable for outdoor applictions however.
0 Materials of Construction – Plastic housing are standard for
residential applications and temperatures up to 100°F (38°C).
Stainless Steel housings, while more expensive, are more durable and can filter higher temperature liquids.
0 Features – Some models of plastic housings come with a shut-off valve built into the head of the housing allowing for easier service and installation.
Cartridges:
Aqua Flo
Point-of-Use
Filtration Products
76
Ultraviolet Disinfection Systems
There is an overwhelming selection of cartridges to choose
from. We have selected a range of cartridges to cover most
water quality needs. The two most common applications are for
sediment removal and for taste & odor removal (various types of
carbon filtration).
A micron rating is also common for most cartridges. One micron
is equivalent to 0.000039 inches (the diameter of a human hair is
50 to 70 microns). Choosing the right micron rating is a balance
between performance and cartridge life. If you chose a smaller
micron rating and the cartridge is loading up too fast then a
higher micron rated cartridge may provide a better balance.
77
Aqua Flo Filters
Aqua Flo Filters
The Aqua Flo range of
filters and replacement
cartridges improves water
quality in the home, farm
Pleated Polyester
Reusable (PR)
Cartridge Filter
*Carbon Block
(CB) Cartridge
Filter
The CB cartridge filter is
suitable for high capacity
chlorine and bad taste
and odor reduction from
drinking water. These filters are also used
for sediment filtration, making them a great
choice for pre-filtering water for reverse
osmosis applications. They make an ideal
choice for a wide range of residential, food service, commercial and industrial applications.
Features:
0 High Dirt-Holding Tolerance Maximizes Utilization of the Carbon Block
0 High porosity maximizes utilization of the carbon block
PR cartridge filters are made
from reusable polyester fibers
which are pleated to maximize
dirt holding capacity. These cartridge filters are multipurpose.
Features:
0 Pleated design maximizes dirt-holding capacity
0 Durable, versatile and reusable
0 Polyester media is bacteria and chemical resistant
0 Nominal 30-micron rating and nominal 50-micron rating
*Radial Flow (RF) Granular Activated Carbon Cartridge Filters
The RF cartridge filters are the solution for effective reduction of chlorine
and bad taste and odor. These filters provide low pressure drop and carbon fines released from the
filter are much less compared to the same size GAC style cartridge filter.
*Dual Gradient (DG) Density Cartridge Filters
DG cartridge filters are made from 100% polypropylene. The progressively loose structure from
inside to outside enhance cartridge performance in reduction of dirt, dust and other particles.
The two separate gradient layers of the filter enhances the performance such that it achieves
a much higher dirt-loading capacity compared to similar size sediment cartridge filters including spun and string-wound. They make an ideal sediment reduction choice for a wide range of
residential, food service, commercial and industrial applications.
Features:
0 Ideal for POE (whole house) and other high
flow rate applications
0 Unique design reduces carbon fines in filtered water
0 Very low pressure drop
*Spun Poly Bonded (SPB) Cartridge Filters
The SPB filters are manufactured from 100% polypropylene which is resistant to chemical and less
prone to bacterial attack. Also they do not impart any taste and odor to the water.
Features:
0 No Fiber release and media migration
0 Designed for purity, bacteria and chemical resistance
0 Two Separate Gradient density layers enhance
cartridge performance
0 Three times the dirt-holding capacity than other traditional sediment filters
Impregnated Carbon Cellulose (ICC) Dual Purpose Filter
The ICC cartridge filter has a dual benefit for sediment filtration and reduction of chlorine and bad
taste and odor from drinking water. These carbon wrap sediment cartridges consists of polypropylene
melt blown core with carbon impregnated outer layer wrap. It is an economical solution for general
water filtration requirements. This filter has high dirt-loading capacity and is recommended for chlorinated water supplies. These dual-purpose cartridges are well suited for residential applications, and
are great polishing filters for closedloop water stream systems. The netting and reinforced support
provide strength to the filter.
Features:
0 Provides sediment filtration as well as taste/odor /chlorine reduction
0 High dirt loading capacity
0 External netting for additional strength
78
Filtration Products
Features:
0 Use on chlorinated or non-chlorinated supplies.
0 Designed for purity, bacteria and chemical resistance
0 Spun fibers form a true gradient
0 Density from outer to inner surfaces
*Granular Activated (CGAC) Carbon Cartridge Filter
The CGAC cartridge filters are effective in reduction of chlorine and other bad taste and odor from
drinking water.
CGACC cartridge filter contain coconut shell based activated carbon which is an environment
friendly but also effective in reducing certain compounds* better than the coal based granular
activated carbon filter cartridges.
Features:
0 Effective taste/odor/ chlorine reduction
0 Designed for maximum
adsorption
0 Post filter to reduce carbon fines
Filtration Products
79
Aqua Flo Filters
Aqua Flo Filters
Polypropylene Melt Blown
(PPMB) Filter Cartridges
The PPMB cartridge filters are made by
thermally bonding polypropylene
microfibers for higher filtration efficiency
performance. The polypropylene material is chemical resistant and not prone
to bacterial attack. They will also not
add any taste, color and odor to the
water. They are available in wide variety
of sizes and micron ratings.
Features:
0 Constructed from high quality polypropylene filter
media for higher filtration efficiency
0 Thermally bonded micro-fiber construction for high strength
0 Available in micron ratings from 1 to 50 and lengths from 10”- 40
*String Wound (SW) Polypropylene Cartridge Filters
SW cartridge filters are manufactured from polypropylene cord which is wound around the polypropylene core. These cartridge filters are economical solution for reduction of sediment, sand, rust and
scale particles from the drinking water.
Features:
0 String wound filters reduces
sediment from a variety of liquids
0 Low pressure drop
0 Withstand high temperatures
0 Wide chemical compatibility
Pleated Cellulose (PC) Filter Cartridges
The PC cartridge filters are made from pleated cellulose media and are recommended for general
water filtration requirements.
Pleated Polyester Cartridge (PPC) Filter
The PCP cartridge filters are madefrom resin impregnated cellulose andpolyester fibers. They are
constructed with thermally bonded media with end caps and inner core heat sealed
together.
Features:
0 Special formulation of resin
impregnated cellulose and polyester fibers
0 Provides higher wet strength than regular cellulose cartridges
0 High flow rate and high dirtholding capacity
0 Wide Variety on sizes and micron ranges available
80
Filtration Products
Filtration Products
Features:
0 Pleated design maximizes dirt-holding capacity
0 Designed for general water filtration purposes
0 Nominal 20-micron rating
0 Cellulose based material
Filtration Products
81
Aqua Flo Filter Housings
Aqua Flo Filter Housings
Model#s P-H-PR-10-34, P-H-PR-10-34-C/B,
P-H-PR-10BV-1, P-H-PR-10BV-34, P-HPR-B-10-34, P-H-PR-B-10-34-C/BL, P-H-VIH10-34-C/BL
NOTE: This filter housing does NOT include a filter
cartridge. Choose the appropriate filter cartridge
for your needs and install in housing according to
the Cartridge Replacement
instructions before proceeding with installation.
See cartridge selection chart.
Specification
Tools Required
• 2 adjustable wrenches • file • pipe threader
• 2 pipe wrenches • pencil • pipe cutter or hacksaw
Parts Included:
0 Filter housing
Materials Required (not included)
Depends on type, size, and location of pipe on which filter will
be installed. Measure the pipe to determine what size nipples,
union, and valve you will need. Depending on the pipe size,
you will also need to purchase the appropriate size fittings.
Consult your local hardware store to learn more about your
particular installation needs.
0 Housing wrench
0 Bracket with mounting hardware
NOTE: Galvanized fittings must be used with galvanized pipe.
*NOTE: Filter cartridge life varies depending on usage and water conditions
**NOTE: Flow rates measured at 60 psi (4.1 bar)
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair has a diameter of approximately 70 microns.
Particles smaller than 40 microns are not visible with the human eye.
Optional Materials
• jumper wire
Filter Housing Specifications
Category
Part #
Model #
Housing Material
Housing O-Ring
Material
Size
In/Out
Temperature
Range (Deg F)
Operating
Pressure
Range
(psi)
City
Water/
Well
Water
Housing (w/PR)
26051
P-H-PR-10-34
Polypropylene (blue)
& AS (clear)
EPDM
2.5"X10"
3/4”
40 to 140
30-100
Both
Housing (w/PR)
26052
P-H-PR-10-34-C/BL
Polypropylene (blue)
& AS (clear)
EPDM
2.5”X10”
3/4”
40 to 140
30-100
Both
Housing (w/PR)
26053
P-H-PR-10BV-1
Polypropylene (blue)
& AS (clear)
EPDM
4.5”X10”
1”
40 to 140
30-100
Both
Housing (w/PR)
26055
P-H-PR-10BV-34
Polypropylene (blue)
& AS (clear)
EPDM
4.5” X 10”
3/4”
40 to 140
30-100
Both
Housing (w/PR)-3G
26056
P-H-PR-B-10-34
Polypropylene (blue)
& AS (clear)
EPDM
2.5”X10” (3G)
3/4”
40 to 140
30-100
Both
Housing (w/PR)-3G
26058
P-H-PR-B-10-34-C/BL
Polypropylene (blue)
& AS (clear)
EPDM
2.5”X10” (3G)
3/4”
40 to 140
30-100
Both
Housing - VIH/PR
26060
P-H-VIH-10-34-C/BL
Polypropylene (blue)
& AS (clear)
EPDM
2.5”X10”
3/4”
40 to 140
30-100
Both
*NOTE: Filter cartridge life varies depending on usage and water conditions
**NOTE: Flow rates measured at 60 psi (4.1 bar)
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair has a diameter of approximately 70 microns.
Particles smaller than 40 microns are not visible with the human eye.
*SS = stainless steel threads
82
Filtration Products
Filtration Products
83
Aqua Flo Filter Housings
Aqua Flo Filter Accessories
26007 Sump Wrench (new style)
Wrench with six notches. Fits AquaFlo sumps manufactured since January
1993.
92289 Sump Wrench (old style)
Wrench with four notches. Fits Aqua
Flo sumps manufactured prior to 1993.
26023 Mounting Bracket
Convenient bracket with eight screws for mounting the WC34 filter.
*NOTE: Filter cartridge life varies depending on usage and water conditions
**NOTE: Flow rates measured at 60 psi (4.1 bar)
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair has a diameter of approximately 70 microns.
Particles smaller than 40 microns are not visible with the human eye.
26049 Aqua Flo Sump and O-Ring
Convenient bracket with eight screws for mounting the WC34 filter.
26022 O-Ring
Buna O-ring seals filter sump and head.
*NOTE: Filter cartridge life varies depending on usage and water conditions
**NOTE: Flow rates measured at 60 psi (4.1 bar)
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair has a diameter of
approximately 70 microns. Particles smaller than 40 microns are not visible with the human eye.
84
Filtration Products
Filtration Products
85
Stainless Steel Housings
Features:
0 Low cost alternative to ROHeavy-duty units for smaller filtration systems and point-of-use applications
0 Brushed 304 stainless steel sump with a cast brass / nickel plated head
0 Ideal for high-pressure / hot water applications
0 Utilizes double open-end cartridges
#65020053 Side Stream Filter Assembly
Pre-Assembled SS-1 Housing with stainless steel
shutoffs and stainless steel flow indicator.
‘Side stream filters are primarily used for filtering a
portion of the water in a closed loop boiler system
to protect the boiler, controls and circulating pumps
Dimensions: 14 1/8” (h) x 20 3/4” (w) x 4 1/8” (d)
86
Filtration Products
Chemical Feed Pumps
Pro Chemicals
Test Kits
Mazzei Injectors
John Guest Fittings
Filtration Products
87
Chemical Feed Pumps
Chemical Feed Pumps
45 Pump Series Single Head Adjustable
Rate
45MHP2
45MHP10
Outputs @ 60Hz
Outputs @ 60Hz
100 psi (6.9 bar)
max 3 gpd (11 lpd)
How it Works
Stenner’s adjustable metering pump is built with three
detachable components: the motor, feed rate control and
pump head. Outputs are dependent upon three factors:
the rpm of the motor gears, the percentage setting on the
feed rate control and the size of the peristaltic pump tube.
All Stenner metering pumps have a 3-point roller design
in the pump head, which acts as a check valve to prevent
back flow, siphoning, overdosing and loss of prime.
100 psi (6.9 bar)
10 gpd (38 lpd)
Gallons per day:0.2 to 3.0
Gallons per hour: 0.01 to 0.13
Liters per day: 0.8 to 11.4
Liters per hour: 0.03 to 0.48
Ounces per minute: 0.02 to 0.27
Milliliter per minute: 0.56 to 7.92
Gallons per day:0.5 to 10.0
Gallons per hour: 0.02 to 0.42
Liters per day: 1.9 to 37.9
Liters per hour: 0.08 to 1.58
Ounces per minute: 0.04 to 0.89
Milliliter per minute: 1.32 to 26.32
Outputs @ 50Hz
The motor shaft rotates at a fixed rpm which drives the
adjustable feed rate control to intermittently engage the
roller assembly within the pump head. The chemical solution in the pump tube is captured between the rollers as
they rotate and compress the tube. As the rollers advance,
the squeezed tube section regains its original form and
generates a vacuum, creating the self-priming feature that
delivers a constant flow unaffected by the outlet pressure.
Outputs @ 50Hz
Liters per day: 0.6 to 9.1
Liters per hour: 0.03 to 0.38
Milliliters per minute: 0.31 to 6.32
Liters per day: 1.5 to 30.3
Liters per hour: 0.06 to 1.26
Milliliters per minute: 1.04 to 21.04
Maximum Operating Temperature
Discharge Pressure
26-100 psi (1.7-6.9 bar)
Amp Draw
Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International
12° F (52° C)
1.7 120V; 0.9 220V, 230V, 250V
Dimensions (l x w x h)
Advantages:
10.6 x 5.3 x 6.0 in
(26.9 x 13.4 x 15.2 cm)
Motor
shaded pole; 26 rpm; 1/30 HP
Shipping Weight
Suction Lift
25’ (7.6 m))
9 lbs (4 kg)
0 Self-priming up to 25 feet does not lose prime
0 Can pump off-gassing solutions
0 Solutions contained in tube, not exposed to pump components
or air
0 Sub-assemblies fit together without tools, easy service or conversion to another model
0 Pump head universal to all Stenner pumps
0 Can run dry without damage
0 Will not clog from dirt or debris
0 Reproducible outputs within 2%
0 Adjustable feed rate control from 5% - 100% in
2.5% increments
0 Pump tubes accept a variety of chemical
0 1 Year Guarantee from date of manufacture
88
Accessories
the patented mechanical feed
rate control allows the pump’s
output to be scaled from 5%
to 100% with the simple turn
of the dial.
Item #
Model
Tube
CDN #
US #
11873
11873
11874
11876
11810
11809
11879
11808
Item #
11873
11874
11876
11879
Description
45MHP2-110v, ¼” tubing
45MHP2-220v, ¼” tubing
45MHP10-110v, ¼” tubing
45MHP10-220v, ¼” tubing
Feed Rate Setting: Outputs per day in US Gallons @ 60Hz
L
1
2
3
4
5
6
7
8
9
10
45MHP2
#1
0.2
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3
45MHP10
#2
0.5
1
2
3
4
5
6
7
8
9
10
Accessories
89
Chemical Feed Pumps
Chemical Feed Pumps
85 Pump Series Single Head Adjustable
Rate
Materials of Construction
All Housings: Lexan® polycarbonate plastic
Pump tube & check valve duckbill: Santoprene® FDA
approved
Pump tube: Tygothane® FDA approved
Checkvalve duckbill (w/Tygothane tube): Pellathane®
Suction/discharge tubing & ferrules (1/4” & 6 mm):
LDPE polyethylene,
NSF/FDA approved
Tube fittings, connecting nuts, check valve fitting,
weighted strainer: Type 1 Rigid PVC-NSF listed
All fasteners: Stainless Steel
Lexan® is a registered trademark of General Electric.
Santoprene® is a registered trademark of Advanced
Elastomer system
Tygothane® is a registered trademark of Saint-Gobain
Performance Plastics
Pellathane® is a registered trademark of The Dow
Company
How it Works
Stenner’s fixed output metering pump is built with two detachable components: the motor and pump head. Outputs
are dependent upon the rpm of the motor gears and the
size of the peristaltic pump tube.
The fixed rate pump has no output adjustment. All Stenner
metering pumps have a 3-point roller design in the pump
head, which acts as a check valve to prevent back flow,
siphoning, overdosing and loss of
prime.
The motor’s output shaft rotates at a fixed rpm which drives
the roller assembly within the pump head. The chemical
solution in the pump tube is captured between the rollers as
they rotate and compress the
tube. As the rollers advance, the squeezed tube section regains its original form and generates a vacuum, creating the
self-priming feature that delivers a constant flow unaffected
by the outlet pressure.
Advantages:
Gallons per day: 0.8 to 17.0
Gallons per hour: 0.03 to 0.71
Liters per day: 3.0 to 64.4
Liters per hour: 0.13 to 2.68
Ounces per minute: 0.07 to 1.51
Milliliter per minute: 2.08 to 44.65
0 Can pump off-gassing solutions
0 Solutions contained in tube, not
exposed to pump components or air
0 Subassemblies fit together without
tools; easy service or conversion to another model
Outputs @ 50Hz
0 Can run dry without damage
0 Reproducible outputs within 2%
0 Pump tubes accept a variety of
chemicals
Tube
Shipping Weight
9 lbs (4 kg)
2
3
4
5
6
7
8
9
10
0.3
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
11852
11853
Item #
11880
11872
Description
STENNER-PUMP-85MHP5-110
STENNER-PUMP-85MHP5-220
Accessories
10.6 x 5.3 x 6.0 in
(26.9 x 13.4 x 15.2 cm)
1
11880
11872
90
3 connecting nuts ¼” or 3/8”
3 ferrules ¼” & 6 mm or 2 ferrules 3/8”
1 injection check valve
1 weighted strainer
1 20’ roll of suction/discharge tubing ¼” or 3/8” white or UV
black or 6 mm (Europe) white
1 spare pump tube
1 mounting bracket
1 installation manual
Dimensions (l x w x h)
L
US #
#1
Accessories shipped with each pump
Feed Rate Setting: Outputs per day in US Gallons @ 60Hz
CDN #
85MHP5
Maximum Operating
Temperature
1.7 120V; 0.9 220V, 230V,
250V
Voltage
Voltage 120V 60Hz; 220V
60Hz230V
50Hz; 250V 50Hz International
0 Adjustable feed rate control from 5%-
100% in 2.5% increments
Suction Lift
25’ (7.6 m)
Amp Draw
Discharge Pressure
26-100 psi (1.7-6.9 bar)
0 Will not clog from dirt or debris
Motor
shaded pole; 44 rpm;
1/30 HP
125° F (52° C)
Liters per day: 2.4 to 51.5
Liters per hour: 0.10 to 2.15
Milliliters per minute: 1.67 to
35.76
0 Pump head universal to all Stenner
pumps
Model
Santoprene®: UL, CSA , CE, NSF-50, NSF-61
Tygothane®: UL, CSA, CE
Outputs @ 60Hz
0 Self-priming up to 25 feet and does not lose prime
Item #
Agency listings
Accessories
91
Flow Switch (Low Flow Rate – SPDT)
Stenner Pump Control Module
Description:
For use on liquid lines using water, ethylene glycol
solutions, or other liquids not corrosive to the brass or phosphor bronze parts. The SPDT contact switch is activated by
a low flow rate; however, it has a large flow capacity with
a minimum pressure drop.
Applications:
How It Works:
The Pump Control Module (PCM) is a component
of the proportional feed system, which delivers
repeatable doses regardless of the system’s flow
rate. The system is used in applications requiring
proportional chemical injection.
F61KD-4
0 Water purification and treatment systems
0 Booster pumps
The proportional feed system, Stenner refers to as
the PCM system consists of three components:
0 Fast shutdown on high input boilers to
0 PCM – pump control module
guard against circulation failure
0 Single head fixed output pump (45 or 85 model)
0 Cooling systems for electronic tubes,
0 Dry contact water meter
bearings, and compressors
Item #
99000070
Description
F61KD-4C Flow Switch
(Low Flow Rate - SPDT)
Inlet and Outlet Size Female
NPT
Enclosure
NEMA
Type
3/4” x 3/4” (19mm x 19mm)
1
Adjustment Range - GPM (L/Min)
Maximum
Liquid Temp
Minimum
Liquid Temp
Maximum
Liquid Pressure
250°F (121°C)
32°F (0°C)
150 psig (1034 kPa)
R to Y Closes Flow R to Y Opens Flow
Increase
Decrease
Min 0.6 (2.27)
Max 1.1 (4.17)
Min 0.3 (1.14)
Max 0.9 (3.4)
The water meter sends a pulse signal to the PCM
which activates the pump to deliver the desired
dose based on water volume. The PCM turns on
the pump for the set duration determined to
inject the solution into the water line.
Dimensions
5 1/32” h x 4” w x 2 13/16” d
127mm x 102mm x 71mm)
Electrical
Horsepower
AC Full Load A
AC Locked Rotor A
Non-Inductive or Resistance Load A
Pilot Duty
120 VAC
1
16
96
16
125 VA, 24/277 VAC
Water Meters
Features:
0 Reed switch
0 Dry contact
0 Power not required
Pulsafeeder Kopkit
Material:
0 Body: Cast bronze
0 Internal: Engineered thermoplastic
0 Magnet: Alnico
Size
Water Meters
Item #
Accessories
Min Flow
Description
Meter, Contacting Stenner WM0751G 3/4” 1Gallon/Pulse
80060051 Meter, Contacting Stenner WM1001G 1” 1Gallon/Pulse
80060052 Meter, Contacting, 1.5” 1.0 GPC, 404(Gal/Contact)
80060053 Meter, Contacting, 2.0” 1.0 GPC, 504(Gal/Contact)
80060050
27399
92
B Body w Couplings C IPS Thread
3/4”
7 1/2” (19.1 cm)
1”
10 1/4” (26.0 cm)
1 1/2” 11 3/4” (29.9 cm)
2”
11 3/4” (29.9 cm)
Kopkit®
Available for every model, the KOPkit provides an
economically priced package of parts required for
routine maintenance. The kit typically contains
new valve cartridges with o-rings, head,
diaphragm, secondary o-ring seal, head screws and
washers.
A Body
12 5/8” (32.1 cm)
1” (2.5 cm)
3/4” (1.9 cm)
15 5/8” (36.7 cm) 1 1/4” (3.2 cm) 1” (2.5 cm)
17 5/8” (44.8 cm)
2” (5.1 cm) 1 1/2” (3.8 cm)
17 5/8” (44.8 cm) 2 1/2” (6.4 cm) 2” (5.1 cm)
Max Flow
(Gallons Per Minute)
0.22
0.44
0.88
1.98
D NPT Thread
22
52
88
132
Max Operating
Temp
Max Operating
Pressure
105 F (40 C)
105 F (40 C)
105 F (40 C)
105 F (40 C)
150 psi
150 psi
150 psi
150 psi
Timer, Stenner, Pump Control Module 5, 0.5 to 5.0 seconds
Accessories
93
Retention Tanks
Chemicals
Made from a unique 3 piece internal construction that allows for consistent engineered dome profiles and integrally bonded connections
that lead to longer tank life. Its heavy duty base is molded out of ABS
for maximum strength and durability. And, It has a removable
schedule 80 PVC bottom connection that can be “accessorized” for
increased installation flexibility.
0 Durable PVC water connection.
0 Flexwave tanks are made in the USA and built to comply with
NSF/ANSI Std 61
0 5 year warranty
FWC Contact Retention Tanks - Dimensions & Capacities
Model
Item #
FWC 30
FWC 40
FWC 40 SQ
FWC 80
FWC 120
33201-1
33202-1
33203-1
33204-1
33205-1
Total Tank Volume
Gallons
30
40
40
80
120
Litres
114
151
151
303
454
Height
In
42.5
53.4
36.9
64.1
71.5
Cm
108
135.6
93.8
162.8
181.6
Diameter
In
16.5
16.5
21.4
21.4
24.2
Cm
41.8
41.8
54.2
54.2
61.4
Socket Glue Connection
1 1/4”schd-80
1 1/4”schd-80
1 1/4”schd-80
1 1/4”schd-80
1 1/4”schd-80
FPT
1
1
1
1
1
1/4”
1/4”
1/4”
1/4”
1/4”
Total Weight
Lbs
23.0
31.0
33.1
60.0
83.5
Kilos
10.4
14.1
15.0
27.0
38.0
Maximum working temperature, internal & external 120F. Materials of Construction: Tank top and bottom domes injection molded copolymer polypropylene. Shell
extruded polypropylene. Outer shell composite construction with fiberglass coated with epoxy resin. Base is injection molded ABS. Top and side ports are stainless
steel reinforced.
BAF Mixing Tank - Dimensions & Capacities
Model
BAF 80
BAF 120
Item #
33217
33211
Total Tank Volume
Gallons
Litres
80
303
119
450
Height
In
Cm
64.1
163
71.5
182
Diameter
In
Cm
21.4
54.4
21.4
54.4
Outlet Connection
Thread Connec- at top of tank
tion
1 1/4”NPT
1 1/4” FPT
1 1/4”NPT
1 1/4” FPT
Total Weight
Lbs
Kilos
23.0
10.4
31.0
14.1
Maximum working pressure 100 PSI. Maximum working temperature, internal & external 120F. Materials of Construction: Copolymer polypropylene wrapped with
fiberglass coated with epoxy resin. Base is rigid ABS. Inner baffle is a copolymer polypropylene with a PVC sch 40 standpipe and diffuser cap. Top port is stainless steel
reinforced and bottome connections are a 1 1/4” NPT schedule 80- connection
Mixing Tanks
Sani-System Liquid Sanitizer Concentrate
Sani-System is the only EPA & NSF approved sanitizer for use in water softeners and reverse osmosis units. It’s proven
to kill 99.99% of harmful bacteria without the use of chlorine, oxidizers or acids that can harm system equipment
parts and resin. The exact pre-measured doses of concentrated
Simple to Use:
For water softeners it is as simple as pouring into the brine well or brine tank and manually regenerating the unit.
For reverse osmosis units, simply remove the cartridges and place the packet contents in the first housing and flush.
Sani-System is the only sanitizer on the market proven by the WQA to safely sanitize an RO unit membrane.
User Benefits:
Technical Information:
0 Faster, easier and safer than other alternative
sanitizers
0 Sani-System is a clear liquid and will react to
0 Easy & reliable single dose packages
0 Routine storage. Rubber gloves are suggested
0 99.99% effective kill rate against harmful bacteria
when handling. Read all relevant MSDS before
handling.
0 Only sanitizer on market proven by WQA to sanitize 0 Do not mix with other chemicals
membrane
The Mixmaster(BAF) Series tanks are a retention tank with an internal
baffle and diffuser which improves mixing and
increases the retention time improving the effectiveness of chemical
treatment of water for disinfection or mineral removal. Great for killing
bacteria or for agricultural applica- tions.
oxidizers
Item #
50035
50032
0 Certified to NSF/ANSI 60 Standards
Description
Sani-System RO Sanitizer 0.25 fl.oz (24 Packets)
Sani-System Water Softener Sanitizer 0.5 fl.oz (24 Packets)
0 Polypropylene tank reinforced with fiberglass sealed with epoxy resin.
0 Cross- link polyethylene upper and lower water chamber. 94
Accessories
Standpipe and diffuser 1-1/4”pvc sch 40
Accessories
95
Chemicals
Chemicals
Pro Chemicals
Pro Chemicals provides a diverse portfolio of water softener
cleaners designed to clean, restore and maintain the life of water
softeners. These products are formulated to treat water softeners
with iron or for daily preventative maintenance.
Rust Out® Water softener Cleaner/iron remover
Rust Out® chemically removes iron and rust build-up that coats the
resin bead and fouls the water softener. Rust Out changes rust and
iron into a clear solution that easily rinses away and does not
contain harsh or abrasive chemicals that damage fiberglass, porcelain or acrylic finishes. The advanced formula contains more than
five
chemicals that are formulated to clean, restore and maintain the life
of water softeners. Rust Out can also be used to clean tough rust
stains from toilets, sinks, tubs, white clothes and exterior surfaces.
Item #
45126
45127
45128
Description
Rust Out - 1.5 lb. Bottle
Rust Out - 5 lb. Bottle
Rust Out - 50 lb Pail
Easy Feeder
The Pro Easy Feeder automatically dispenses the right amount of
Pro Res Care Cleaning Solution to maintain water softener efficiency.
The Pro Easy Feeder is non-electric and easy to install and use. For
use with 64 oz bottles of Res Care.
Item #
Description
55030005 Easy Feeder - 0.5 oz/day Feeder
55030006 Easy Feeder - 1.0 oz/day Feeder
Pot® Perm Greensand Iron Filter Regenerant
The Pro Easy Feeder automatically dispenses the right amount of
Pro Res Care Cleaning Solution to maintain water softener efficiency.
The Pro Easy Feeder is non-electric and easy to install and use. For
use with 64 oz bottles of Res Care.
Res Care® liquid Resin Cleaning Solution
Res Care® is a specially formulated liquid cleaner designed to
remove limited iron, manganese, silt, metal particles and organic
compounds that cause softener inefficiencies. Regular use of Res
Care will restore the softener back to peak efficiency and
maintain the life of the unit. For best results use a Res Care
Automatic Feeder or manually add during regeneration to
prevent mineral build-up.
Item #
45143
45145-1
50010
Description
Pot Perm - 5 Lb. Bottle
Pot Perm - 10 Lb. Bottle
Pot Perm - 55 Lb. Bottle
Item #
Description
45147
Res Care - 1 gal. (128 oz) Bottle
80030022 Res Care - 64 oz Bottle (Easy Feeder Refill)
45148
Res Care - 1 qt. (32 oz) Bottle
96
Accessories
Accessories
97
Chemicals
Hach Test Kits
Ban T® Alkaline Water Neutralizer
Ban T® (formerly called Pro-Citric Acid) is specifically
formulated to effectively lower pH and remove iron and
other contaminants from fouled water softeners. Ban T
should be used as preventative maintenance on all water
softeners in areas with moderate iron content to clean,
restore and maintain the life of the softener. Ban T is an
environmentally-friendly cleaning agent that removes hard
water deposits and moderate iron staining from
household fixtures.
Item #
45138
Description
Ban T - 1.5 lb. Bottle
#202300
#49018
Neutra 7® Acid Water Neutralizer®
Neutra 7® (formerly called Pro Soda Ash) is a proprietary alkaline
blend which neutralizes acid water and keeps the injection point
clean. This helps to eliminate corrosion of piping, pressure tanks,
water heaters and fixtures without the hassle of constant
cleaning of calcium build-up.
#66751
Item #
45157
45158
Description
Neutra 7 - 7 Lb. Bottle
Neutra 7 - 40 Lb. Pail
Item #
Description
49145300
5B HARDNESS KIT - 0-30 GPG
301227
BUFFER SOLUTION HARDNESS 3 ,100 ML MDB 42432
49225401
CN65 TOTAL/FREE CHLORINE KIT
492060300
DPD FREE CHLORINE PP 5ML PK/100.,14077-99
492060400
DPD TOTAL CHLORINE PP 5ML PK/100. 14076-99
49183701
HA62A HARDNESS, IRON, pH KIT
301228
HARDNESS 2 TEST SOLUTION,100 ML MDB 42532
301226
HARDNESS 3 TEST SOLUTION,100 ML MDB
49018
HS-C HYDROGEN SULPHIDE KIT (0 - 5 MG/L)
66751
METER TDS MYRON L 0-5000 PPM 512M5
49146700
MN5 MANGANESE (0-3 MG/L) KIT
80050020
PAPER, HYDROGEN SULFIDE 100
66761
PH/TEMP METER, pH-200, 0-14 pH
80050007
PH/TEMP WATERPROOF HYDRO TESTER, PH-80
4998366
PILLOW, BUFFER CITRATE POWDER PK/100
301233
PILLOW, FERROUS IRON REAGENT POWDER PK/100
4985199
PILLOW, HARDNESS INDICATOR POWDER PK/100 Manver 2
4998499
PILLOW, SODIUM PERIODATE POWDER PK/100
33004
SOAP TEST KIT
4942411
SOLUTION, HARDNESS 1, 500 ML
4942511
SOLUTION, HARDNESS 2, 500 ML
4942616
SOLUTION, HARDNESS 3, 500 ML
49193701
TA3 TANNIN - LIGNIN KIT
49022
TABLETS, ALKASELTZER 36
80050008
TDS-4 POCKET SIZE METER, HM DIGITAL
49016
TEST KIT COMBINATION DEALER 2496101
202300
TEST KIT, HA-77 HARDNESS & IRON
80050052
UNIVER 3 POWDER 28.3 GRAMS 213-20H
301518
UNIVER 3 POWDER PILLOWS,PK/100
80050038
WIDE RANGE 4 pH SOLUTION
#4918370
NEW Dealer Combination Kit –
Hardness, iron,
sulphur, pH,Manganese, TDS
98
Accessories
#49145300 hach 5b hardness test Kit 1 – 30 gpg
Trust the original Hach test kit! Simple drop count
Titration measures hardness as CaCo3
(1 gpg = 17.1 mg / l). 100 tests.
Accessories
99
Spectrum Test Kits (U.S. Only)
Mazzei Injectors
Mazzei® Injectors are high-efficiency, venturi-type, differential pressure injectors with internal mixing vanes. When a sufficient pressure
difference exists between the inlet and outlet ports of the injector, a
vacuum is created inside the injector body, which initiates suction of
a liquid or gas through the suction port.
Item #
Description
80040001
Injector, Mazzei, 384-PP, ½” Inlet / Outlet
80040002
Injector, Mazzei, 484A-PP, ¾” Inlet / Outlet
80040003
Injector, Mazzei, Bypass Kit 384-PP, ½” Inlet / Outlet
80040004
Injector, Mazzei, Bypass Kit 484A-PP, ¾” Inlet / Outlet
:DWHU)ORZ
VXFWLRQ
0D]]HL
Basic Kit Hardness
863DWHQW
,QWHUQDWLRQDO3DWHQWV
How a Mazzei® Injector Works
When pressurized water enters the injector inlet, it is constricted
toward the injection chamber and changes into a high-velocity jet
stream. The increase in velocity through the injection
chamber results in a decrease in pressure, thereby enabling an additive material to be drawn through the suction port and entrained
into the water stream. As the jet stream is diffused toward the injector outlet, its velocity is reduced and it is reconverted into pressure
energy (but at a pressure lower than injector inlet pressure).
Mazzei® Injectors are extremely efficient. They operate over a wide
range of pressures and require only a minimal pressure differential
between the inlet and outlet sides to initiate a vacuum at the
suction port.
Mattson / Witt K7225 Eductor
Standard Kit Hardness,
Iron, pH & Chlorine
Used for iron removal - the K7225 Eductor is used in combination
with an aeration tank and a backwashable filter containing special
media adds a controlled amount of air to the water supply just
before it enters the aeration tank. As the water sprays into the
aeration tank it picks up more air. The oxygen in the air starts the
natural iron removal process by oxidizing the iron and causing it to
come out of solution. The iron can then be more easily filtered.
Deluxe Kit Hardness,
Iron, pH,Chlorine & TDS
100
Accessories
Accessories
101
Tubing & Fittings
(John Guest Quick Connect)
Tubing & Fittings
(John Guest Quick Connect)
Polypropylene Fittings
The PP Range of inch-size push-in fittings is offered for tube sizes
1/4” O.D. to 1/2” O.D. The fittings are manufactured in white
polypropylene with food grade EPDM O-rings. They have been
developed to satisfy the compatibility needs for a wide range of
applications.
Part #
CI010821W
Working Pressures and Temperatures
1/4” X 1/8”-WHITE, (10 Pack)
CI010822W
1/4” X 1/4”-WHITE, (10 Pack)
Water Max. 150 psi at 70˚F (Max. 10 Bar at 20˚C)
CI010823W
1/4” X 3/8”-WHITE, (10 Pack)
CI011222W
3/8” X 1/4”-WHITE, (10 Pack)
PI010821S
1/4” X 1/8”, (10 Pack)
PI010822S
1/4” X 1/4”, (10 Pack)
PI010823S
1/4” X 3/8”, (10 Pack)
PI011221S
3/8” X 1/8”, (10 Pack)
PI011222S
3/8” X 1/4”, (10 Pack)
PI011223S
3/8” X 3/8”, (10 Pack)
PI011224S
3/8” X 1/2”, (10 Pack)
PI011623S
1/2” X 3/8”, (10 Pack)
PI011624S
1/2” X 1/2”, (10 Pack)
PI012026S
5/8” X 3/4”, (10 Pack)
PP010822W
/4” X 1/4”-WHITE, (10 Pack)
PP010823W
1/4” X 3/8”-WHITE, (10 Pack)
Working Pressures and Temperatures
PP011222W
3/8” X 1/4”-WHITE, (10 Pack)
Water Max. 150 psi at 70˚F (Max. 10 bar at 20˚C)
PP011223W
3/8” X 3/8”, (10 Pack)
PP011224W
3/8” X 1/2”, (10 Pack)
PP011623W
1/2” X 3/8”, (10 Pack)
Max. 60 psi at 140˚F (Max. 4 Bar at 60˚C)
Min. 33˚F/1˚C
Polypropylene Shut-Of Valve
The PPSV Range of Shut-Off Valve is offered for tube sizes ¼”
O.D. and 3/8” O.D., produced in polypropylene and fitted with
EPDM O-rings. Polypropylene has the advantage of being more
chemically resistant than acetal. The valves are for use with
potable water. For use with other potable liquids please contact
our Technical Support Department for guidance. The valves are
not to be used with compressed air, explosive gases, petroleum
spirits and other fuels or for heating systems.
Max. 60 psi at 140˚F (Max. 4 bar at 60˚C)
Min. 33˚F/1˚C
Model Description
Male Connector - NPTF Thread
PP011624W
1/2” X 1/2”, (10 Pack)
Male Connector - Flare Male Connector (tube X thread)
Polypropylene Fittings
The John Guest PE Range of plastic tubing is produced in Linear Low Density
Polyethylene for cold and intermittent hot water applications. Our tubing is made
from FDA compliant materials and is NSF International Standard 51 & 61
certified. John Guest LLDPE Tubing provides excellent resistance to environmental
stress cracking as measured by ASTM D-1693 (10% IGEPAL). John Guest Polyethylene tubing is designed for use with John Guest Super Speedfit push-in fittings,
John Guest Shut-Off Valves and virtually all standard tubing connectors.
PI0108F4S
1/4” X 1/4”, (10 Pack)
PI0112F4S
3/8” X 1/4”, (10 Pack)
PI0112F6S
3/8” X 3/8”, (10 Pack)
PI0112F8S
3/8” X 1/2”, (10 Pack)
PI0116F8S
1/2” X 1/2”, (10 Pack)
Union Tee (for use when branching of - RO faucets & tanks )
CI0208W
1/4” - WHITE, (10 Pack)
CI0212W
3/8” - WHITE, (10 Pack)
PI0208S
1/4”, (10 Pack)
PI0212S
3/8”, (10 Pack)
PI0216S
1/2”, (10 Pack)
PP0208W
1/4”, (10 Pack)
PP0212W
3/8”, (10 Pack)
Reducing Tee (tube x tube x branch )
PI301208S
PI301612S
PP30121208W
PP301612W
102
Accessories
Union Elbow (tube)
3/8” X 3/8” X 1/4”, (10 Pack)
1/2” X 1/2” X 3/8”, (10 Pack)
3/8” X 3/8” X 1/4”, (10 Pack)
1/2” X 1/2” X 3/8”, (10 Pack)
CI0308W
1/4” - WHITE, (10 Pack)
CI0312W
3/8” - WHITE, (10 Pack)
PI0308S
1/4”, (10 Pack)
PI0312S
3/8”, (10 Pack)
PI0316S
1/2”, (10 Pack)
PP0308W
1/4”, (10 Pack)
PP0312W
3/8”, (10 Pack)
PP0316W
1/2”, (10 Pack)
Fixed Elbow (NPTF Thread - tube X thread)
CI480821W
CI480822W
CI480823W
CI481222W
PI480821S
PI480822S
1/4” X 1/8” - WHITE, (10 Pack)
1/4” X 1/4” - WHITE, (10 Pack)
1/4” X 3/8” - WHITE, (10 Pack)
3/8” X 1/4” - WHITE, (10 Pack)
1/4” X 1/8”, (10 Pack)
1/4” X 1/4”, (10 Pack)
PI480823S
1/4” X 3/8”, (10 Pack)
PI481222S
3/8” X 1/4”, (10 Pack)
PI481223S
3/8” X 3/8”, (10 Pack)
PI482024S
5/8” X 1/2”, (10 Pack)
PP480821W
1/4” X 1/8”, (10 Pack)
PP480822W
1/4” X 1/4”, (10 Pack)
PP480823W
1/4” X 3/8”, (10 Pack)
PP481222W
3/8” X 1/4”, (10 Pack)
PP481223W
3/8” X 3/8”, (10 Pack)
Reducing Elbow (tube X tube)
PI211208S
3/8” X 1/4”, (10 Pack)
PI211612S
1/2” X 3/8”, (10 Pack)
PP211208W
3/8” X 1/4”, (10 Pack)
PP211612W
1/2” X 3/8”, (10 Pack)
Plug In/Stem Elbow (stem X tube)
CI220808W
CI221208W
CI221212W
PI220808S
PI221208S
PI221212S
PI221616S
PP220808W
PP221208W
PP221212W
PP221616W
1/4” X 1/4” - WHITE, (10 Pack)
3/8” X 1/4” - WHITE, (10 Pack)
3/8” X 3/8” - WHITE, (10 Pack)
1/4” X 1/4”, (10 Pack)
3/8” X 1/4”, (10 Pack)
3/8” X 3/8”, (10 Pack)
1/2” X 1/2”, (10 Pack)
1/4” X 1/4”, (10 Pack)
3/8” X 1/4”, (10 Pack)
3/8” X 3/8”, (10 Pack)
1/2” X 1/2”, (10 Pack)
Accessories
103
Tubing & Fittings
(John Guest Quick Connect)
Union Connector(tube X tube)
CI0408W
1/4” - WHITE, (10 Pack)
CI0412W
3/8” - WHITE, (10 Pack)
PI0408S
1/4”, (10 Pack)
PI0412S
3/8”, (10 Pack)
PI0416S
1/2”, (10 Pack)
PP0408W
1/4”, (10 Pack)
PP0412W
3/8”, (10 Pack)
PP0416W
1/2”, (10 Pack)
Reducing Union (union X tube X tube)
PI201208S
3/8” X 1/4”, (10 Pack)
PI201612S
1/2” X 3/8”, (10 Pack)
PP201208W
3/8” X 1/4”, (10 Pack)
PP201612W
1/2” X 3/8”, (10 Pack)
Stem Adaptor (NPTF Thread - stem X thread)
CI050821W
1/4” X 1/8” - WHITE, (10 Pack)
CI050822W
1/4” X 1/4” - WHITE, (10 Pack)
CI051222W
3/8” X 1/4” - WHITE, (10 Pack)
CI051223W
3/8” X 3/8” - WHITE, (10 Pack)
PI050821S
1/4” X 1/8”, (10 Pack)
PI050822S
1/4” X 1/4”, (10 Pack)
PI051222S
3/8” X 1/4”, (10 Pack)
PI051223S
3/8” X 3/8”, (10 Pack)
PI051623S
1/2” X 3/8”, (10 Pack)
PI051624S
1/2” X 1/2”, (10 Pack)
PP050821W
1/4” X 1/8”, (10 Pack)
PP050822W
1/4” X 1/4”, (10 Pack)
PP051222W
3/8” X 1/4”, (10 Pack)
PP051223W
3/8” X 3/8”, (10 Pack)
PP051623W
1/2” X 3/8”, (10 Pack)
PP051624W
1/2” X 1/2”, (10 Pack)
Stem Reducer (stem X thread)
CI061208W
3/8” X 1/4” - WHITE, (10 Pack)
PI061208S
3/8” X 1/4”, (10 Pack)
PI061612S
1/2” X 3/8”, (10 Pack)
PP061208W
3/8” X 1/4”, (10 Pack)
PP061612W
1/2” X 3/8”, (10 Pack)
Bulkhead Union (tube X mounting hole diameter)
CI1208W
1/4” - 0.67 - WHITE, (10 Pack)
PI1208S
1/4” - 0.67, (10 Pack)
PI1212S
3/8” - 0.83, (10 Pack)
PI1216S
1/2” - 1.06, (10 Pack)
PP1208W
1/4” - 0.67, (10 Pack)
PP1212W
Accessories3/8” - 0.83, (10 Pack)
104
PP1216W
1/2” - 1.06, (10 Pack)
Reducing Bulkhead Union (tube X tube X mounting hole diameter)
PI121208S
3/8” X 1/4” - 0.83, (10 Pack)
PP121208W
3/8” X 1/4” - 0.83, (10 Pack)
Faucet Connector UNS Thread (tube X thread)
CI3208U7S
1/4” X 7/16”, (10 Pack)
CI3212U7S
3/8” X 7/16”, (10 Pack)
PP3208U7W
1/4” X 7/16”, (10 Pack)
PP3212U7W
3/8” X 7/16”, (10 Pack)
Stem to Hose Barb (stem X hose barb)
PI250808S
1/4” X 1/4”, (10 Pack)
PI251208S
3/8” X 1/4”, (10 Pack)
PI251212S
3/8” X 3/8”, (10 Pack)
PI251216S
3/8” X 1/2”, (10 Pack)
PP251212W
3/8” X 3/8”, (10 Pack)
PP251216W
3/8” X 1/2”, (10 Pack)
PP251612W
1/2” X 3/8”, (10 Pack)
PP251616W
1/2” X 1/2”, (10 Pack)
Stem to Hose Barb Long Version (stem X hose barb)
PI251212SL
3/8” X 3/8”, (10 Pack)
PI290808S
1/4” X 1/4”, (10 Pack)
PI291208S
3/8” X 1/4”, (10 Pack)
Female Connector NPTF Thread (tube X thread)
Tubing & Fittings
(John Guest Quick Connect)
PEI202820
3/4 x 1/2 Reducing Coupler,
PEX Plug-in Elbow
PEI222020
PEX Plug-In Elbow, 1/2” Stem - 1/2” Pipe,
PEI222828
PEX Plug-In Elbow, 3/4” Stem - 3/4” Pipe,
PEX Reducing Tee
PEI3028A
PEI3028B
PEI3028C
PEI3028D
PEX Stackable Tee
PEX Reducing Tee 3/4” x 3/4” x 1/2” CTS,
PEX Reducing Tee 3/4” x 1/2” x 1/2” CTS,
PEX Reducing Tee 1/2” x 1/2” x 3/4” CTS,
PEX Reducing Tee 3/4” x 1/2” x 3/4” CTS,
PEI532020
PEX Stackable Tee 1/2” CTS x 1/2” Stem x 1/2” CTS
PEI532820
PEX Stackable Tee 3/4” CTS x 3/4” Stem x 1/2” CTS
PEI532828
PEX Stackable Tee 3/4” CTS x 3/4” Stem x 3/4” CTS
PEX Miscellaneous
PEIBTC2034
PEIBTC20C75
PEISTC2034
PEISTC20C75
PEX Female Swivel Elbow, 1/2” CTS x 1/2” NPS
PEX Female Ballcock Elbow, 1/2” CTS x 7/8”-15/16 UNS
PEX Female Swivel Connector, 1/2” CTS x 1/2” NPS
PEX Female Ballcock Connector, 1/2” CTS x 7/8”-15/16 UNS
PI450822S
1/4” X 1/4”, (10 Pack)
PI451222S
3/8” X 1/4”, (10 Pack)
PP450822W
1/4” X 1/4”, (10 Pack)
PP451222W
3/8” X 1/4”, (10 Pack)
Female Flare Connector FFL (tube X thread)
PI4512F4S
PI4512F6S
Plug (stem)
PI0808S
PI0812S
PI0816S
PP0808W
PP0812W
PP0816W
End Stop (tube)
3/8” X 1/4”, (10 Pack)
3/8” X 3/8”, (10 Pack)
PI4608S
PI4612S
1/4”, (10 Pack)
3/8”, (10 Pack)
1/4”, (10 Pack)
3/8”, (10 Pack)
1/2”, (10 Pack)
1/4”, (10 Pack)
3/8”, (10 Pack)
1/2”, (10 Pack)
Accessories
105
Water Conditioning Glossary
Absorption - The process in which one substance is
taken into the body of another substance, termed the
absorbent. An example is the absorption of water into
soil.
Acid - A substance which releases hydrogen ions when
dissolved in water. Most acids will dissolve the common
metals and will react with a base to form a neutral salt
and water.
Activated Carbon - A granular material usually produced
by the roasting of cellulose base substances, such as
wood or coconut shells, in the absence of air. It has a very
porous structure and is used in water conditioning as an
adsorbent of organic matter and certain dissolved gases.
Sometimes called “activated charcoal.”
Adsorption - The process in which matter adheres to the
surface of the adsorbent.
Aeration - The process in which air is brought into intimate
contact with water, often by spraying water through air or
by bubbling air through water. Aeration may be used to
add oxygen to the water for oxidation of matter such as
iron or to cause the release of dissolved gases such as
carbon dioxide or hydrogen sulfide from the water.
Alkalinity - The quantitative capacity of a water or water
solution to neutralize an acid. It is usually measured by
titration with a standard acid solution of sulfuric acid and
expressed in terms of its calcium carbonate equivalent.
Anion - A negatively charged ion in solution such as
bicarbonate, chloride or sulfate.
Anion Exchange - An ion exchange process in which
anions in solution are exchanged for other anions from
an ion exchanger. In demineralization, for example,
bicarbonate, chloride and sulfate anions are removed
from solution in exchange for a chemically equivalent
number of hydroxide anions from the anion exchange
resin.
Aquifer - A layer or zone below the surface of the earth
which is capable of yielding a significant volume of water.
Atom - The smallest particle of an element that can exist
either alone or in combination with smaller particles of
the same element or of a different element.
Attrition - The process in which solids are worn down or
ground down by friction, often between particles of the
same material. Filter media and ion exchange materials
are subject to attrition during backwashing, regeneration
and service.
Backwash - The process in which beds of filter or ion
exchange media are subjected to flow opposite to service
flow direction to loosen the bed and to flush suspended
matter collected during the service run to waste.
Bacteria - Unicellular micro-organisms which typically
reproduce by cell division. Although usually classed as
plants, bacteria contain no chlorophyll.
Bacteriostatic - A feature of a carbon filter that is
supposed to inhibit the growth of bacteria within the filter
- usually by the addition of silver.
106
Accessories
Base - A substance which releases hydroxyl ions when
dissolved in water. Bases react with acids to form a
neutral salt and water.
Bed - The ion exchange or filter media in a column or
other tank or operational vessel.
Bed Depth - The height of the ion exchange or filter media
in the vessel after preparation for service.
Boiling Point - The temperature at which a substance will
change from a liquid state to a gaseous or vapor state.
Brackish Water - Water containing between 1000 and
1500 mg/l of dissolved solids is generally considered to
be brackish.
Brine (R.O.) - Same as reject water. One of two streams
of fluids generated by a reverse osmosis unit. It contains
the impurities removed from the feed water.
Brine (Softening) - A strong solution of salt(s), such as
sodium chloride, and water used in the regeneration of
ion exchange water softeners but also applied to the
mixed sodium, calcium and magnesium chloride waste
solution from regeneration.
Calcium (Ca) - One of the principal elements making
up the earth’s crust, the compounds of which, when
dissolved, make the water hard. The presence of calcium
in water is a factor contributing to the formation of scale
and insoluble soap curds which are a means of clearly
identifying hard water.
Calcium Hypochlorite (CaCl2O2) - A chemical compound
used as a bleach and a source of chlorine water treatment;
specifically useful because it is stable as a dry powder
and can be formed into tablets.
Capacity - An expression of the quantity of an undesirable
material which can be removed by a water conditioner
between servicing of the media (i.e. cleaning, regeneration
or replacement) as determined under standard test
conditions. For ion exchange water softeners, the capacity
is expressed in grains of hardness removal between
successive regenerations and is related to the pounds of
salt used in regeneration. For filters, the capacity may be
expressed in the length of time or total gallons delivered
between servicing.
Caustic Soda - The common name for sodium hydroxide.
Cation - An ion with a positive electrical charge, such as
calcium, magnesium and sodium.
Cation Exchange - Ion exchange process in which cations
in solution are exchanged for other cations from an ion
exchanger.
Cellulose Acetate (CA) and Cellulose Triacetate (CTA) - A
family of synthetic materials based on cellulose used
to make reverse osmosis membranes. While CTA is
superior to CA, under adverse water conditions both are
effective in removing a wide spectrum of impurities from
water. The disadvantage of cellulose-type membranes
is that they are subject to bacterial attack, particularly in
unchlorinated water supplies. CTA has superior bacterial
resistance.
Water Conditioning Glossary
Channeling - The flow of water or other solution in a
limited number of passages in a filter or ion exchange
bed instead of distributed flow through all passages in
the bed.
Chloramines - Chemical complexes formed from the
reaction between ammonia and chlorine. They are presently
being used to disinfect municipal water supplies because,
unlike chlorine, they do not combine with organics in the
water to form potentially dangerous carcinogens such as
trihalomethanes (THMs). Chloramines can exist in three
forms, the proportions of which depend on the physical
and chemical properties of the water. Water containing
chloramines may not be used for fish or kidney dialysis
equipment.
Chlorides (Cl) - an ion which forms acids when combined
with hydrogen and salts when combined with metal ions.
Chlorides can be corrosive and impart a salty taste to
water.
Chlorine (Cl2) - A gas widely used in the disinfection of
water and an oxidizing agent for organic matter, iron, etc.
Coagulant - A material, such as alum, which will
form a gelatinous precipitate in water and cause the
agglomeration of finely divided particles into larger
particles which can then be removed by settling and/or
filtration.
Colloid - Very finely divided solid particles which will not
settle out of a solution; intermediate between a true
dissolved particle and a suspended solid which will settle
out of solution. The removal of colloidal particles usually
requires coagulation to form larger particles which may
be removed by sedimentation and/or filtration.
Compensated Hardness - A calculated value based on
the total hardness - the magnesium to calcium ratio and
the sodium concentration of a water. It is used to correct
for the reductions in hardness removal capacity caused
by these factors in cation exchange water softeners. No
single method of calculation has been widely accepted.
Conductivity - The quality or power to carry electrical
current. In water, the conductivity is related to the
concentration of ions capable of carrying electrical current.
Contact Time - The length of time water is in direct contact
with activated carbon (R.O.) or chlorine (chlorination
system.) This is a major factor in determining how
effectively impurities will be removed.
Corrosion - The destructive disintegration of a metal by
electrochemical means.
Cycle Time - The amount of time in seconds elapsed
between pump start and pump shut-down.
Dechlorination - The removal of excess chlorine residual,
often after super-chlorination.
Deionization (DI) - The removal of all ionized minerals
and salts (both organic and inorganic) from a solution by
a two-phase ion exchange procedure. First, positively
charged ions are exchanged for a chemically equivalent
amount of hydrogen ions. Second, negatively charged
ions are removed by an ion exchange resin for a
chemically equivalent amount of hydrogen ions. The
hydrogen and hydroxide ions introduced in this process
unite to form water molecules. The term is often used
interchangeably with demineralization.
Disinfection - A process in which pathogenic, disease
producing bacteria are killed. May involve disinfecting
agents such as chlorine or physical processes such as
heating.
Dissolved Solids - The weight of matter in true solution
in a stated volume of water. Includes both inorganic and
organic matter and is usually determined by weighing the
residue after evaporation of the water at 105°F or 180°C.
Distillation - The process in which a liquid, such as water,
is converted into its vapor state by heating and the vapor
cooled and condensed to the liquid state and collected.
Used to remove solids and other impurities from water.
Multiple distillations are required for extreme purity.
DNA - Deoxyribonucleic acid constituting the genetic
material of the chromosome in a cell, responsible for
reproductive characteristics.
Drawdown - The amount of water delivered by the
storage tank between pump shut-down and pump start.
E Coli (Escherichia Coli) - One of the members of the
coliform group of bacteria indicating fecal contamination.
Effluent - The stream emerging from a unit, system
or process such as the softened water from an ion
exchange softener.
Exhaustion - The state of an ion exchange material in
which it is no longer capable of effective function due to
the depletion of the initial supply of exchangeable ions.
The exhaustion point may be defined in terms of a limiting
concentration of matter in the effluent or, in the case of
demineralization, in terms of electrical conductivity.
Fecal - Matter containing or derived from animal or
human waste.
Feed Pressure - The pressure at which water is supplied
to the R.O. module.
Feed Water - A term which refers to the water supply
that is put into a water treatment system for processing
(removal of impurities.)
Flocculation - The agglomeration of finely divided
suspended solids into larger, usually gelatinous, particles.
The development of a ‘floc’ after treatment with a
coagulant by gentle stirring or mixing.
Flow Control - A device designed to limit the flow of
water or regenerant to a predetermined value over a
broad range of inlet water pressures.
Flow Rate - The quantity of water or regenerant which
passes a given point in a specified unit of time, often
expressed in gallons per minute.
Flux - The flow rate of water through reverse osmosis
membranes, per square foot of surface.
Fouling - The process in which undesirable foreign matter
accumulates in a bed of filter media or ion exchanger,
Glossary
107
Water Conditioning Glossary
clogging pores and coating surfaces and thus inhibiting
or retarding the proper operation of the bed.
Freeboard - The vertical distance between a bed of
filter media or ion exchange material and the overflow
or collector for backwash water. The height above
the bed of granular media available for bed expansion
during backwashing. May be expressed either as a linear
distance or a percentage of bed depth.
Grain (gr) - A unit of weight equal to 1/7000 of a pound
or 0.0648 gram.
Grain per Gallon (gpg) - A common basis for reporting
water analysis in the United States and Canada. One
grain per U.S. gallon equals 17.12 milligrams per liter
(mg/l) or parts per million (ppm). One grain per British
(Imperial) gallon equals 14.3 mg/l or ppm.
Greensand - A natural mineral, primarily composed of
complex silicates, which can be coated with manganese
oxide to form a catalytic absorptive surface. This surface
is used to attract ferrous iron and manganese as well as
to absorb dissolved oxygen which is used to oxidize iron,
manganese or hydrogen sulfide.
Hardness - A characteristic of natural water due to the
presence of dissolved calcium and magnesium. Water
hardness is responsible for most scale formation in pipes
and water heaters and forms insoluble “curd” when it
reacts with soaps. Hardness is usually expressed in grains
per gallon (gpg), parts per million (ppm) or milligrams per
liter (mg/l), all as calcium carbonate equivalent.
Hard Water - Water with a total hardness of 1 gpg or
more as calcium carbonate equivalent.
Hydrologic Cycle - The natural water cycle, including
precipitation of water from the atmosphere as rain
or snow, flow of water over or through the earth
and evaporation or transpiration to water vapor in the
atmosphere.
Hydrogen Sulfide (H2S) - A gas characterized by an
offensive odor, commonly referred to as “rotten egg”
odor. Flammable and poisonous in high concentrations,
corrosive to most metals and can even tarnish silver.
Detectable by most people in concentrations as low as
0.5 ppm.
Hydrocharger - Trade name of a particular type of air
induction or injector valve.
Hydrolysis - The chemical degradation of an R.O.
membrane in water due to certain conditions such as high
pH. Cellulose based membranes are quite susceptible to
hydrolysis while the TFC type are virtually immune.
Influent - The stream entering a unit, stream or process,
such as the hard water entering an ion exchange water
softener.
Ion - An atom, or group of atoms, which function as a unit
and have a positive or negative electrical charge due to
the gain or loss of one or more electrons.
Ion Exchange - A reversible process in which ions
are released from an insoluble permanent material in
108
Glossary
exchange for other ions in a surrounding solution; the
direction of the exchange depends upon the affinities
of the ion exchanger for the ions present and the
concentrations of the ions in the solution.
Iron (Fe) - An element often found dissolved in ground
water (in the form of ferrous iron) in concentrations
usually ranging from 0-10 ppm (mg/l). It is objectionable
in water supplies because of the staining caused after
oxidation and precipitation (as ferric hydroxide); because
of the tastes; and because of unsightly colors produced
when iron reacts with tannins in beverages such as
coffee and tea.
Iron Bacteria - Organisms which are capable of utilizing
ferrous iron, either from the water or from steel pipe
in their metabolism and precipitating ferric hydroxide in
their sheaths and gelatinous deposits. These organisms
tend to collect in pipelines and tanks during periods of
low flow and to break loose in slugs of turbid water to
create staining, taste and odor problems.
Magnesium (Mg) - One of the elements making up
the earth’s crust, the compounds of which, when
dissolved in water, make the water hard. The presence
of magnesium in water is a factor contributing to the
formation of scale and insoluble soap curds.
Manganese (Mn) - An element sometimes found
dissolved in ground water, usually with dissolved iron but
in lower concentrations. Causes black stains and other
problems similar to iron.
Manganese Greensand - Greensand which has been
processed to incorporate in its pores and on its surface
the higher oxides of manganese. The product has a mild
oxidizing power and is often used in the oxidation and
precipitation of iron, manganese and/or hydrogen sulfide
and their removal from water.
Mechanical Filtration - The process of removing
suspended particles from water by a straining action. The
finest mechanical filters can remove bacteria as small as
0.2 microns.
Media - The selected materials in a filter that form the
barrier to the passage of certain suspended solids or
dissolved minerals. (Singular of media is medium).
Milligrams per Liter (mg/l) - A unit concentration of matter
used in reporting the results of water and wastewater
analysis. In dilute water solutions, it is practically equal to
parts per million but varies from the ppm in concentrated
solutions such as brine. As most analysis are performed
on measured volumes of water, the mg/l is a more
accurate expression of the concentration and is the
preferred unit of measure.
Micron - A linear measure equal to one millionth of a
meter or .00003937 inch. The symbol for the micron is
the Greek letter “μ”.
Micron Rating - The term applied to a filter or filter medium
to indicate the particle size above which all suspended
solids will be removed throughout the rated capacity.
As used in industry standards, this is an “absolute”
not “nominal” rating. (Refer to S-200, Recommended
Water Conditioning Glossary
Industry Standards for Household & Commercial Water
Filters.)
Common examples include: oxygen, chlorine, potassium
permanganate, hydrogen peroxide, iodine and ozone.
Mineral - A term applied to inorganic substances such
as rocks and similar matter found in the earth strata
as opposed to organic substances such as plant and
animal matter. Minerals normally have definite chemical
composition and crystal structure. The term is also
applied to matter derived from minerals such as the
inorganic ions found in water. The term has been
incorrectly applied to ion exchangers, even though most
of the modern materials are organic ion exchange resins.
Ozone (O3) - An unstable form of oxygen occurring naturally
in the upper atmosphere or artificially produced because
of its strong oxidizing or disinfection characteristics.
Mineral Salts - The form in which minerals from dissolved
rock exist in water. Same as Total Dissolved Solids. This
is the so-called inorganic form of minerals. In excess,
they cause water to have a disagreeable taste. Some are
harmful to human health.
Molecular Weight - The sum of the atomic weights of the
individual atoms (from a periodic chart) that make up a
molecule of a particular substance (e.g. H2O) H=1 atomic
weight, 0=16 atomic weight, therefore, molecular weight
= 2 + 16 = 18.) Cellulose based membranes can remove
substances as light as MW of 300, while TFC type
membranes remove substances as light as MW of 200.
Nanometer - A measure of a wavelength in the
electromagnetic spectrum. One nanometer equals 109
meter.
Neutralization - In general, the addition of either an
acid or a base to a solution as required to produce a
neutral solution. The use of alkaline or basic materials to
neutralize the acidity of some waters is common practice
in water conditioning.
Organic Iron - A ferrous iron molecule which is enveloped
in an organically complex molecule that resists oxidation.
May be present in water that contains a great deal of
colored colloidal turbidity.
Organics - Any of the compounds whose chemical
structure is based on carbon (e.g. carbon dioxide, wood,
sugar, protein, plastics, methane, THM, TCE, etc.)
Osmosis - A process of diffusion of a solvent, such
as water through a semipermeable membrane, which
will transmit the solvent but impede most dissolved
substances. The normal flow of solvent is from the dilute
solution to the concentrated solution. (See Reverse
Osmosis).
Osmotic Pressure - The pressure created by the tendency
of water to flow in osmosis. Every 100 ppm of TDS
generates about 1 pound per square inch (psi) of osmotic
pressure. This osmotic pressure must first be overcome
by the water pressure for the reverse osmosis membrane
to be effective.
Oxidation - A chemical process in which electrons are
removed from an atom, ion or compound. The addition
of oxygen is a specific form of oxidation. Combustion is
an extremely rapid form of oxidation while the rusting of
iron is a slow form.
Oxidizing Agents - Any substance that oxidizes
another substance and is itself reduced in the process.
Particle Size - As used in industry standards, the size of a
particle suspended in water as determined by its smallest
dimension, usually expressed in microns.
Parts per Million (ppm) - A common basis for reporting
the results of water and waste water analysis, indicating
the number of parts by weight of water or other solvent.
In dilute water solutions, on part per million is practically
equal to one milligram per liter, which is the preferred
unit. 17.12 ppm equals one grain per U.S. gallon.
Pathogen - An organism which may cause disease.
PCB - Polychlorinated Biphenyls - A highly toxic organic
contaminant found in water supplies which is suspected
of causing cancer in humans.
pH - or the potential of hydrogen ion activity or
concentration. pH is a measure of the intensity of the
acidity or alkalinity of water on a scale from 0 to 14, with
7 being neutral. When acidity is increased, the hydrogen
ion concentration increases, resulting in a lower pH value.
Similarly, when alkalinity is increased, the hydrogen ion
concentration decreases, resulting in higher pH. The pH
value is an exponential function so that pH is 10 times
as alkaline as pH 9 and 100 times as alkaline as pH 8.
Similarly, a pH 4 is 100 times as acid as pH 6 and 1000
times as acid as pH 7.
Potassium Chloride (KCl) - a compound consisting of
potassium and chloride, becoming increasingly popular
as a substitute for sodium chloride in regenerating water
softeners.
Potassium Permanganate (KMnO4) - A powerful oxidizing
agent consisting of dark purple crystals with blue metallic
sheen. Explosive in contact with sulfuric acid or hydrogen
peroxide. Increases flammability of combustible materials.
Used to renew the black manganese oxide coating on
greensand media.
Precipitate - To cause a dissolved substance to form a
solid particle which can be removed by settling or filtering
such as in the removal of dissolved iron by oxidation,
precipitation and filtration. The term is also used to refer
to the solid formed and the condensation of water in the
atmosphere to form rain or snow.
Pre-treatment - Whatever alterations of the raw feed
water are required to prevent damage to the reverse
osmosis membrane.
Product Water - The pure water that has been separated
from the feed water stream by the reverse osmosis
membrane.
Pumping Rate - The amount of actual water that can
be drawn from a pressure system expressed in gallons
per minute (gpm) obtained by dividing the drawdown
(gallons) by the cycle time (seconds) and multiplying the
result by 60 (seconds.)
Glossary
109
Water Conditioning Glossary
Notes
Quartz - A high grade of glass made using quartz sand.
____________________________________________________________________________________________
Raw Water - Untreated water or any water before it
reaches a specific water treatment device or process.
Recovery - The amount of product water as compared
with the total amount of feed water. This will give a
measure of the efficiency of operation. For example,
starting with 10 gallons of feed water, if 6 gallons is
product water and 4 gallons reject water, the recovery
is 60%.
Regenerant - A solution of a chemical used to restore the
capacity of an ion exchange or oxidation system.
Regeneration - In general, includes the backwash, brine
and fresh water rinse steps necessary to prepare a water
softener exchange bed for service after exhaustion.
Specifically, the term may be applied to the “brine” step
in which the sodium chloride solution is passed through
the exchanger bed. The term may also be used for similar
operations relating to demineralizers and certain filters.
Rejection - The percentage of TDS removed from the
feed water. Typically greater than 90% rejection is
achieved with reverse osmosis.
Reject Water (same as Brine) - That portion of the feed
water that does not pass through the R.O. membrane
and which carries the remaining impurities to the drain.
Residual Chlorine - Chlorine remaining in a treated
water after a specified period of contact time to provide
protection throughout a distribution system. The
difference between the total chlorine added and that
consumed by oxidizable matter.
Resin - Synthetic organic ion exchange material such as
the high capacity cation exchange resin widely used in
water softeners.
Reverse Osmosis (R.O.) - A process that reverses, by the
application of pressure, the flow of water in the natural
process of osmosis so that the water passes from the
more concentrated to the more dilute solution through a
semi-permeable membrane.
Sediment - The sum of particles of dirt, clay, silt and
vegetation which float or are suspended in water and can
be removed by mechanical filtration. See Turbidity.
soaps are soluble and useful but can be converted to
insoluble calcium and magnesium soaps (curd) by the
presence of these hardness ions in water.
Soda Ash - The common name for sodium carbonate, a
chemical compound used as an alkaline builder in some
soap and detergent formulations to neutralize acid water
and in the lime soda ash water conditioning process.
Total Hardness - The sum of all hardness constituents
in a water, expressed as their equivalent concentration
of calcium carbonate. Primarily due to calcium and
magnesium in solution but may include small amounts
of metals, such as iron, which can act like calcium and
magnesium in certain reactions (see Hardness.)
Toxic - Having an adverse physiological effect on man.
Toxic Metals - Elemental metals that find their way
into water supplies from natural and industrial sources
and which are detrimental to human health (e.g. lead,
cadmium, mercury, arsenic.)
Toxic Organics - Carbon-based chemicals which are
frequently found in our water supplies and are harmful
to human health. They are usually from agricultural and
industrial effluents and hazardous waste dumps (e.g.
TCE, PCB, DCBP, pesticides, etc.)
Turbidity - Suspended biological, inorganic and organic
particles in water which may be in sufficient amount to
make the water seem cloudy (see Sediment.)
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
Virus - The smallest form of life known to be capable of
producing disease of infection, usually considered to be
of large molecular size. They multiply by assembly of
component fragments in living cells, rather than by cell
division as do most bacteria.
____________________________________________________________________________________________
Volatile Organic Chemical (VOC) - Chemicals or
compounds with boiling points below 212°F, facilitating
their evaporation before water.
____________________________________________________________________________________________
Water Softening - The removal of calcium and magnesium,
the ions which are the principal cause of hardness, from
water.
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
Semi-permeable - A term which applies to special
materials, both natural and synthetic, which allow
certain substances such as water to pass through (to
permeate) while blocking or rejecting the passage of
other substances such as dissolved solids and organics.
____________________________________________________________________________________________
Service (Peak) Flow Rate - The greatest amount of water
(expressed in gallons per minute) that a particular filter
can effectively process based on short pump runs of less
than 10 to 15 minutes maximum.
____________________________________________________________________________________________
Sequester - A chemical reaction in which certain ions
are bound into a stable, water soluble compound, thus
preventing undesirable action by the ions.
Soap - One of a class of chemical compounds which
possesses cleaning properties, formed by the reaction of
a fatty acid with a base of alkali. Sodium and potassium
110
Glossary
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
Glossary
111
Notes
Notes
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
112
113
Canada West
655 Park St.
Regina, SK S4N 5N1
Canada East
490 Pinebush Rd Unit 1
Cambridge ON N1T 0A5
U.S.A.
8437 10th Ave North
Golden Valley, MN 55427
U.S.A.
760 Mayflower Park Dr
Suite 110
Carmel, IN 46032
CALL US TOLL-FREE
1-877-288-9888
www.watergroup.com
Regina, SK • Cambridge, ON • Carmel, IN • Golden Valley, MN
Download PDF