Matrox | Parhelia Precision SGT | User guide | Matrox Parhelia Precision SGT User guide

ENGLISH
Matrox solutions for medical imaging
Matrox AuroraVX3mp
User Guide
10940-301-0110
2006.02.01
www.matrox.com/graphics
Contents
Overview ...................................................................................................................3
Hardware supplied....................................................................................................................................3
Software supplied (for Windows XP) ......................................................................................................3
Installation overview.................................................................................................................................4
Hardware installation ...............................................................................................5
Replacing brackets on a low-profile graphics card..................................................................................7
Connection setup.....................................................................................................8
Step-by-step connection setup .................................................................................................................8
Display setup..........................................................................................................10
Accessing PowerDesk..............................................................................................................................10
Monitor setup .........................................................................................................................................10
Portrait monitor setup............................................................................................................................11
Multi-display setup .................................................................................................................................11
Software setup .......................................................................................................12
Product information ...............................................................................................13
Troubleshooting......................................................................................................16
Basic procedures .....................................................................................................................................16
Main troubleshooting.............................................................................................................................16
Extra troubleshooting.............................................................................................................................20
Warranty .................................................................................................................28
Software license agreement ..................................................................................30
Index .......................................................................................................................31
More information ....................................................................................................36
2
Matrox AuroraVX3mp – User Guide
Overview
Your Matrox AuroraVX3mp product is designed to use up to 3 displays at a time – 1 analog
Navigation Console and 2 digital Twin Imaging Displays. With its high image quality, sharp grayscale
and color output, and multi-display support, this product can be used for a range of medical
applications, including PACS (Picture Archiving and Communication Systems), X-ray imaging, MRI
(Magnetic Resonance Imaging), CT (Computed Tomography), and digital radiography.
Hardware supplied
Matrox card
Triple-monitor cable
1 DVI-to-HD15 adapter *
* For more information, see page 8.
Software supplied (for Windows XP)
!
Matrox PowerDesk-SE – to use your Matrox product
!
Other software – see the CD-ROM Readme file
Matrox AuroraVX3mp – User Guide
3
Installation overview
Note: If your Matrox product is already partially or fully installed on your computer, some
or all the installation information in this guide may not apply to you. However, this
information may be useful if you need to reinstall your Matrox product.
To install your Matrox product:
4
1
Install the Matrox card – see “Hardware installation”, page 5.
2
Connect your monitors – see “Connection setup”, page 8.
3
Install the software – see “Software setup”, page 12.
4
Set up the software – see “Display setup”, page 10.
Matrox AuroraVX3mp – User Guide
Hardware installation
This section describes how to install your Matrox card. If your Matrox card is already installed in your
computer, skip to “Connection setup”, page 8. For information specific to your computer, like how to
remove its cover, see your system manual.
WARNING: To avoid personal injury, turn off your computer, unplug it, and then wait for
it to cool before you touch any of its internal parts. Also, static electricity can severely
damage electronic parts. Before touching any electronic parts, drain static electricity from
your body (for example, by touching the metal frame of your computer). When handling
a card, carefully hold it by its edges and avoid touching its circuitry.
Note: Most Matrox low-profile graphics cards ship with ATX brackets compatible with
most systems. If you have a low-profile system, you may need to change the standard
bracket on your graphics card to a low-profile bracket. For more information, see
“Replacing brackets on a low-profile graphics card”, page 7.
1
Open your computer and
remove your existing graphics
card *
If a graphics card isn’t already installed in
your computer, skip to step 2.
a
Using Add/Remove Programs in the
Windows Control Panel, remove any
currently installed display drivers.
Restart your computer for the changes
to take effect.
After your computer restarts, you’re
prompted to install drivers for the new
graphics hardware detected. Click
Cancel.
b
Turn off your computer and all peripherals such as your monitor or printer.
c
Open the computer and remove your existing graphics card (if any). (If graphics
hardware is built into the motherboard of your computer, this graphics hardware should
automatically disable itself after your Matrox card is installed. For more information, see
your system manual.)
* With multi-display mode, you may be able to use your existing graphics card. For Windows XP, see Windows XP online help
under “Install additional monitors”.
Matrox AuroraVX3mp – User Guide
5
2
Choose an expansion slot
Most computers have different types of
expansion slots. Choose a PCI Express ×16
(PCIe) slot for your Matrox card. Your
system manual should identify the location
of each type of expansion slot in your
computer.
(Back of computer)
(×16)
PCI
Express
slots
(×1)
PCI
slots
(64-bit)
(32-bit)
WARNING: Inserting your Matrox card
into the wrong type of slot could damage
your card, your computer, or both.
PCI Express ×16 card
3
Insert your Matrox card
a
Position your Matrox card over the
expansion slot you’ve chosen.
b
Push the card in firmly and evenly until
it’s fully seated in the slot.
c
Secure the bracket of your Matrox card
to the computer frame.
Your Matrox card is now installed. Before restarting your computer, connect your monitor or
monitors (see “Connection setup”, page 8). After connecting, restart your computer and install your
Matrox software (see “Software setup”, page 12).
WARNING: If your computer doesn’t restart after your Matrox card is installed, turn off
your computer to avoid damaging electronic parts. For troubleshooting information, see
page 13.
6
Matrox AuroraVX3mp – User Guide
Replacing brackets on a low-profile graphics card
Most Matrox low-profile graphics cards ship with ATX brackets compatible with most systems. The
following explains how to change brackets on your Matrox product.
1
Remove the current bracket
from your Matrox graphics card
by removing the screw (a) on top
of the graphics card, then the
nuts (b) on either side of the
monitor connector.
2
Attach and fasten the new
bracket with the two nuts you
just removed.
ATX bracket
Low-profile bracket
Matrox AuroraVX3mp – User Guide
7
Connection setup
This section describes how to connect monitors to your Matrox product.
WARNING: Don’t change monitor connections while your computer is turned on. While
your computer is turned on, it may be using monitor settings that are specific to the current
monitor connections. Some devices may be permanently damaged if incorrect settings are
used.
Note: Whenever you change your connection setup, make sure you’re using the correct
connectors and that all connectors are properly fastened.
Step-by-step connection setup
1
Attach the triple-monitor cable
Attach your Matrox triple-monitor cable to the
connector on the bracket of your Matrox card.
Make sure the connectors are properly fastened.
2
Triple-monitor
cable
Connect the navigation console
Your navigation console must use an HD-15
connector.
DVI-to-HD15
adapter
Connect your navigation console to the DVI
connector labeled 3/NAV of your triple-monitor
cable using the DVI-to-HD15 adapter included
with your product.
3
Connect the first imaging display
Connect your first imaging display to the DVI
connector labeled 1/IMG1 of the triple-monitor
cable.
8
Monitor connector
(HD-15)
Matrox AuroraVX3mp – User Guide
DVI connector
4
Connect the second imaging display
Connect your second imaging display to the DVI connector labeled 2/IMG2 of the
triple-monitor cable.
Your Matrox card is now installed. Restart your computer and install your Matrox software (see
“Software setup”, page 12).
Matrox AuroraVX3mp – User Guide
9
Display setup
Windows XP – Your Matrox display driver includes Matrox PowerDesk software. This software helps
you get the most out of your Matrox card. This section has important information on how to
configure your display settings using Matrox PowerDesk software.
Accessing PowerDesk
Many display controls are available through Matrox PowerDesk. To access PowerDesk features, click
the Matrox PowerDesk icon ( ) on your Windows taskbar. To see the PowerDesk icon in
Windows XP, you may need to click the Show hidden icons button ( ) on your Windows taskbar.
Note: Multi-display mode is supported under Windows XP. For more information on
multi-display mode, see Windows XP online help under “Multiple Display support”.
Monitor setup
Before changing your display resolution, color palette, or other Matrox PowerDesk settings, make
sure correct software monitor settings are selected. If you have a Plug-and-Play (DDC) monitor,
correct settings are usually automatically selected. The following explains how to make sure your
monitor settings are okay.
WARNING: If incorrect software monitor settings are applied, some monitors can be
permanently damaged. For more information, see your monitor manual.
If you have a Plug-and-Play (DDC) monitor, Windows should automatically use correct
settings for your monitor. To make sure the correct monitor is selected in Windows:
1
Right-click your Windows desktop background, then click Properties " Settings "
Advanced " Monitor. If you’re using a multi-display desktop, select a display before
clicking Advanced.
2
If the monitor name listed isn’t Plug-and-Play and doesn’t match your monitor, click
Properties " Driver " Update driver. Follow the on-screen instructions.
3
If you’re using a multi-display desktop, repeat steps 1–2 for each display in your
Windows desktop.
For more information on Windows monitor settings, see Windows documentation.
10 Matrox AuroraVX3mp – User Guide
Portrait monitor setup
Most standard monitors are landscape monitors – that is, they’re wider
than tall. Portrait monitors are taller than wide. Different models of
portrait monitors may have different types of support for this orientation.
Some portrait monitors support portrait mode by rotating the monitor
signal and reporting support for portrait display resolutions to the
graphics hardware. For most monitors, the display resolutions supported
are automatically detected and used by the Matrox display driver.
If your monitor supports both portrait and landscape orientations, it may
have one connector for landscape mode and one for portrait mode. Which connector you use
determines whether portrait or landscape mode is used. For more information, see your monitor
documentation. Before changing your connection setup, always shut down your computer.
Some portrait monitors are merely landscape monitors physically rotated 90 degrees. These monitors
don’t rotate the monitor signal and don’t report support for portrait resolutions. In this case, use
Matrox software to rotate the display to match the monitor orientation.
To rotate your display with Matrox software:
1
From the main menu of PowerDesk (see “Accessing PowerDesk”, page 10), select
Multi-Display Setup.
2
Select the appropriate device, then select the display you want to configure.
3
Next to Display Rotation, select the degree of rotation for your display.
4
Click OK or Apply for your changes to take effect.
Multi-display setup
To set up multi-display mode:
1
From the main menu of PowerDesk (see “Accessing PowerDesk”, page 10), select
Multi-Display Setup.
2
Select the appropriate device, then select the multi-display setup you want to use.
3
Click OK or Apply for your changes to take effect.
For more information on Matrox PowerDesk, click Help from the main menu of PowerDesk (see
“Accessing PowerDesk”, page 10).
Matrox AuroraVX3mp – User Guide 11
Software setup
Note: This guide has references that are specific to the Matrox installation CD-ROM. If your Matrox
product wasn’t packaged by Matrox (for example, if it was included with your computer), your
product may not include this CD-ROM.
If you don’t have this CD-ROM, certain references in this guide may not reflect the software you
have. For more information, see other software documentation provided by your system vendor.
This section describes how to install Matrox software for Windows
XP.
You may need administrator rights to install certain software. For
more information, see Windows documentation or contact your
system administrator.
1
Install display driver
Insert the installation CD-ROM in your CD-ROM drive – the CD-ROM installation
program automatically starts. Follow the on-screen instructions.
2
Install optional software
After your computer restarts, the setup program shows you a list of additional items you can
install. For each item you want to install, select a list item, click Install, then follow the
on-screen instructions.
3
Set up your display software
See “Display setup”, page 10.
12 Matrox AuroraVX3mp – User Guide
Troubleshooting
Basic procedures
This section explains basic procedures that are referred to by some troubleshooting items in this
guide.
Restarting in VGA mode
Windows XP – What follows is information on how to restart your computer in VGA mode.
1
Click Start " Shut Down " Restart " OK* to restart your computer. (* Depending on
your version and configuration of Windows, this part of the step may not be necessary.)
If your primary monitor is unusable, see your system manual for information on how to
restart your computer using a hardware control.
2
Before Windows starts, press [F8] for the Windows startup menu to appear. (If [F8]
doesn’t work, instead try pressing and holding [Ctrl] before Windows starts.)
3
Select “VGA mode”, then press [Enter].
Main troubleshooting
This section addresses possible problems that could prevent you from using your computer.
Problem
1Cause
1Solution
2Cause
Computer doesn’t display information or boot after Matrox card is
installed
Your Matrox card may not be properly installed.
Make sure your Matrox card is properly installed. Specifically, make sure the card is firmly
inserted in its expansion slot and that all connections to it are firmly in place. For more
information, see “Hardware installation”, page 5.
There may be unsupported graphics hardware in your computer.
1Solution
If an unsupported graphics card is plugged into an expansion slot, remove it.
2Solution
If graphics hardware is built into your computer motherboard, your system may not have
automatically disabled it when you inserted your Matrox card. Check your system manual for
instructions on how to disable your computer’s built-in graphics hardware.
13 Matrox AuroraVX3mp – User Guide
3Cause
Your computer BIOS (Basic Input/Output System) settings may be incorrect.
1Solution
Change your BIOS settings, specifically the AGP aperture size. For more information on your
computer BIOS, see your system manual.
4Cause
Your computer BIOS may not be up to date. For more information on your computer BIOS,
see your system manual.
1Solution
Reinstall your previous graphics card and, if possible, update your computer BIOS. This can
usually be done with software from the manufacturer of your computer. Contact your system
vendor or manufacturer to get a BIOS update for your computer.
To get the correct BIOS update, you may need to know the serial number your computer
displays when it restarts. (This number is usually in the lower-left corner of the display.)
5Cause
1Solution
The BIOS of your Matrox card may need to be updated or restored.
Windows XP – For advanced users – If you have another VGA-compatible graphics card, you
can try resetting the BIOS of your Matrox card.
1
Turn off your computer and insert the other graphics card into an expansion slot. For
more information on expansion slots, see “Choose an expansion slot”, page 6.
2
Plug your monitor into the other graphics card and restart your computer.
Note: Make sure your computer uses the other graphics card to control your primary
display. The graphics card that controls your primary display is the one that first displays
information when you restart your computer.
Your computer BIOS (Basic Input/Output System) and the slot type (see “Choose an
expansion slot”, page 6) of each graphics card help determine which graphics card controls
your primary display.
To control which graphics card is used for your primary display, you may be able to change
the configuration of your computer BIOS. For information on how to change your
computer BIOS settings, see your system manual.
3
Insert your Matrox installation CD-ROM.
4
Click Start " Run, type d:\SysUtils. You will need to use the PBIOSWin program to
update the BIOS of your Matrox card. For more information on how to use this program,
see the Readme file in the Sysutils folder.
5
Turn off your computer, remove the other graphics card, then plug your monitor into
your Matrox card.
6
Restart your computer.
Matrox AuroraVX3mp – User Guide 14
6Cause
The power supply of your computer may not be powerful enough for all the devices on your
computer.
1Solution
For advanced users – Remove unnecessary devices from your computer (for example, an
unused network card or an extra CD-ROM drive). For more information, see your system
manual or the documentation for each device.
2Solution
You may be able to upgrade the power supply of your computer. We recommend a power
supply of 300 Watts or more. For more information, contact your computer vendor.
Problem
Wrong color balance, screen image off-center, or no picture at all
1Cause
1Solution
2Cause
Your monitor video controls may be improperly set.
Adjust your monitor controls (brightness, contrast, and so on). For more information, see
your monitor manual.
Your monitor may not be properly connected.
1Solution
Make sure you’re using the correct connectors (see “Connection setup”, page 8) and that all
connectors are properly fastened.
2Solution
Make sure the monitor power cable is firmly in place.
3Solution
Make sure the connection to the back of the monitor is firmly in place.
3Cause
1Solution
If display problems occur after the startup screen of your operating system, your software
monitor settings may be incorrect.
Make sure correct software monitor settings are selected.
If your primary display is still usable, see “Monitor setup”, page 10. Otherwise, see the next
troubleshooting item.
4Cause
1Solution
Your monitor may not be properly calibrated.
Make sure your monitor is calibrated for the gray palette you’re using.
15 Matrox AuroraVX3mp – User Guide
Problem
1Cause
After the startup screen, or after display settings are changed, the
screen image is garbled or unusable
(blank screen, rolling or overlapping screen images)
The Matrox display driver may be trying to use settings your monitor doesn’t support. This
can happen if a monitor was never selected in the software and the display resolution was
changed to one your monitor doesn’t support, or if the monitor connected to your computer
was changed without changing it in the software.
WARNING: If incorrect software monitor settings are applied, some monitors can be
permanently damaged. For more information, see your monitor manual.
1Solution
2Cause
1Solution
Windows XP –
1
If your primary display is unusable, restart your computer in VGA mode (see “Restarting
in VGA mode”, page 16).
2
Right-click the Windows desktop background, then click Properties " Settings.
3
Move the Screen resolution (Windows XP) slider down to its lowest setting, then click
OK.
4
Restart your computer normally.
5
Make sure the correct monitor is selected in Windows (see “Monitor setup”, page 10).
6
Restore your original display settings (see steps 2 and 3).
Files on your system may have been deleted or corrupted.
Remove, then restore Matrox software:
Note: Before removing software, make sure you have all the necessary files to reinstall
software that may still be needed. Also, make sure the display driver you reinstall supports
all Matrox products in your computer.
Note: Windows XP – You may need administrator rights to remove certain software. For
more information, see Windows documentation.
Windows XP –
1
If your primary display is unusable, restart your computer in VGA mode (see “Restarting
in VGA mode”, page 16).
Matrox AuroraVX3mp – User Guide 16
2
To remove Matrox software:
a
Click Start " Settings* " Control Panel " Add/Remove Programs (double-click*)
" Matrox PowerDesk-SE " Change/Remove " Yes. (* Depending on your version
and configuration of Windows, this part of the step may not be necessary.)
b
Click Matrox Driver " Change/Remove " Yes.
3
Restart your computer.
4
After your computer has restarted, install the latest display driver for your Matrox card.
You may also need to reinstall other Matrox software.
Extra troubleshooting
The following are extra troubleshooting items related to graphics hardware.
Problem
1Cause
Can’t select one or more display resolutions supported by your
monitor
Windows XP – Windows may be disabling display resolutions that it can’t detect as
supported by your monitor.
1Solution
Install the latest monitor software from your monitor manufacturer.
2Solution
Change Windows monitor settings:
Problem
1
Right-click your Windows desktop background, then click Properties " Settings.
2
If you’re using a multi-display desktop, select a display.
3
Click Advanced " Monitor, disable Hide modes that this monitor cannot display, then
click OK " OK.
Can’t use Windows, Windows reports a configuration error, and/or
can’t install or uninstall Matrox display driver
Note: Windows XP – You may need administrator rights to install certain software. For
more information, see Windows documentation.
1Cause
1Solution
The problem may be specific to the motherboard in your computer.
There may be a software update available for your motherboard. To find out what
motherboard model your computer is using, see your system manual. For more information,
contact the maker of your motherboard or computer. Many motherboard or computer
manufacturers have software updates available on their Web site.
17 Matrox AuroraVX3mp – User Guide
2Cause
Files on your system may have been deleted or corrupted.
1Solution
Remove, then restore Matrox software. For more information, see page 19.
Problem
Monitor settings aren’t automatically detected
WARNING: If incorrect software monitor settings are used, your display may become
unusable and some monitors can be permanently damaged. For more information, see
your monitor manual.
Note: Windows XP – To check if your monitor settings are properly selected:
1
Right-click your Windows desktop background, then click Properties " Settings "
Advanced " Monitor. If you’re using multi-display mode, select a display before
clicking Advanced.
2
If you see the name of your monitor or “Plug-and-Play”, your monitor settings are
properly selected.
If you see the wrong monitor name or Default monitor, your monitor settings aren’t
properly selected.
1Cause
Your monitor may not be Plug-and-Play. Most new monitors are Plug-and-Play but many
older ones aren’t. Software can’t automatically detect settings for monitors that aren’t
Plug-and-Play.
1Solution
Manually select your monitor settings in the software. For more information, see “Monitor
setup”, page 10.
2Cause
If a monitor was changed or added while Windows was running, the new monitor may not
be detected by the software.
1Solution
Restart your computer. If your monitor is a Plug-and-Play monitor, it should be
automatically detected by the software.
Matrox AuroraVX3mp – User Guide 18
Problem
1Cause
3D and video programs don’t work
Your computer may not have given an IRQ (interrupt request) to your Matrox graphics card
or may have given one used by another device in your computer. This may be because your
computer’s “Plug-and-Play” feature is turned off.
Windows XP – To check the display adapter’s IRQ:
1Solution
1
Click Start " Settings* " Control Panel " Performance and Maintenance* " System
(double-click*) " Hardware " Device Manager. (* Depending on your version and
configuration of Windows, this part of the step may not be necessary.)
2
Click the plus sign to the left of the Display adapters. An “X” through an icon means the
hardware has been disabled. A circled exclamation point through the icon means the
hardware has a problem.
3
Double-click the name of your Matrox display
adapter to open a properties dialog box. The
type of problem is displayed in the General tab
" Device status area. Check also the Resources
tab " Resource type list for an Interrupt Request.
Change settings in your computer BIOS setup utility.
If your computer has the options of enabling Plug-and-Play detection, or assigning an IRQ
to a VGA adapter, make sure they’re enabled. If your computer doesn’t have these options,
you may be able to manually assign an IRQ to your Matrox card using the BIOS setup utility.
For more information on the BIOS setup utility of your computer, see your system manual
or contact your system manufacturer.
2Cause
1Solution
Your computer’s other BIOS settings may be incorrect.
Reset your computer BIOS settings to the factory defaults using your computer’s built-in
BIOS setup utility. The factory defaults are usually the “safest” settings. Check your system
manual for more information.
19 Matrox AuroraVX3mp – User Guide
Problem
1Cause
Using multiple displays under Windows XP, program doesn’t work
with main graphics card
Your main graphics card may not be controlling your primary display. The graphics card that
controls your primary display is the one that first displays information when you restart your
computer.
A program that doesn’t recognize multiple displays may not work with a graphics card unless
it’s controlling your primary display.
Your computer BIOS (Basic Input/Output System) and the slot type (see “Choose an
expansion slot”, page 6) of each graphics card help determine which graphics card controls
your primary display.
1Solution
If you’re having problems with a program that can be moved on your Windows desktop, run
this program on your primary display. Make sure the program window doesn’t overlap any
other display. If the program doesn’t work with the graphics card controlling your primary
display, or you want your main graphics card to control your primary display, see the other
solutions.
2Solution
Change the configuration of your computer BIOS so that the slot type of your main graphics
card has priority for becoming the primary display. For information on how to change your
computer BIOS settings, see your system manual.
If your computer BIOS doesn’t let you select which slot type has priority for becoming the
primary display, a BIOS update may be available to let you do this. (The BIOS of most
computers can be updated with software.) For a possible BIOS update for your computer,
contact your system vendor.
3Solution
If there’s a graphics controller built into the motherboard of your computer, by changing
your computer BIOS settings, you may be able to change which device controls your primary
display. For more information, see your system manual.
4Solution
If you don’t need to use the graphics card that’s controlling your primary display, remove it
from your computer. If your primary display is controlled by the motherboard of your
computer, see your system manual for information on how to disable this graphics controller.
2Cause
The program you’re using may not work properly with systems using more than one display
at a time.
1Solution
An update may be available for the program you’re using. This update may fix problems this
program has with multi-display systems. For more information, contact the software
distributor for the program you’re using.
2Solution
If you’re using multiple displays in independent mode, try using stretched mode instead.
Programs that don’t work in independent mode may work in stretched mode. For more
information, see Matrox PowerDesk help.
Matrox AuroraVX3mp – User Guide 20
3Solution
Windows XP – For advanced users – To use a program that doesn’t support multi-display
systems, you can disable all displays other than your primary display:
1
Restart your computer in VGA mode (see “Restarting in VGA mode”, page 16).
2
Click Start " Settings* " Control Panel " Performance and Maintenance* " System
(double-click*) " Hardware " Device Manager. (* Depending on your version and
configuration of Windows, this part of the step may not be necessary.)
3
Click the plus sign to the left of the Display adapters.
4
For each display adapter, except for the one controlling your primary display, right-click
the name of a display adapter, then click Disable " Yes.
Note: Your primary display can’t be disabled.
5
Restart your computer for changes to take effect.
Note: To restore display adapters, repeat steps 2–4, but click Enable in step 4.
Problem
1Cause
1Solution
Not all graphics cards in the computer are fully supported
(Software doesn’t work with a certain graphics card, or another
graphics card doesn’t work at all)
If you have different models of graphics cards in your computer, your Matrox display driver
may not support all the graphics cards in your computer.
Under Windows XP, a display driver may support one or more graphics cards. If a display
driver doesn’t support a certain card, a different display driver must be used for that card.
Software that depends on a certain display driver may not work with a graphics card that’s
not using the same display driver.
Note: If your Matrox product was provided by the manufacturer of your computer, check
the Web site of that manufacturer for the latest display driver. A display driver provided by
the manufacturer of your computer is more likely to be tested with your computer model.
2Solution
If a graphics card isn’t supported, you may need to remove it. If there’s graphics hardware
built into the motherboard of your computer that’s not supported by your software, see your
system manual for information on how to disable this graphics hardware.
21 Matrox AuroraVX3mp – User Guide
2Cause
Windows XP – If the Windows method for display driver installation was used (instead of
running the setup program included with your Matrox display driver), the driver may not be
installed for all the graphics cards it supports.
1Solution
Run the setup program included with the Matrox display driver. The setup program
automatically installs the display driver for each Matrox graphics card it supports.
Problem
Screen image defects appear, program doesn’t run properly, or
Windows doesn’t work properly
(example: mouse pointer not drawn properly)
1Cause
1Solution
Some programs may not work properly with some Matrox acceleration.
Windows XP – Disable Windows effects:
1
Right-click your Windows desktop background, then click Properties " Appearance "
Effects.
2
Disable one or more features.
2Solution
If possible, update your Matrox display driver. For more information, contact the computer
or monitor vendor who provided your Matrox card.
3Solution
Windows XP – Disable Matrox hardware acceleration:
Problem
1Cause
1Solution
2Cause
1Solution
1
Right click your Windows desktop background, then click Properties " Settings "
Advanced " Troubleshooting (or Troubleshoot).
2
Move the Hardware acceleration slider to None.
3
Click OK " OK to accept the changes.
Program window or dialog box doesn’t appear on screen
Another window or dialog box may be covering the window or dialog box you want to see.
Move, close, or minimize any window or dialog box that may be covering the window or
dialog box you want to see.
If you’re using multi-display mode, the program window or dialog box may be in a display
or on a monitor that’s unusable. (For example, your monitor may not be properly connected
or configured.)
Make sure all the displays and monitors you want to use are usable. For more information,
see other troubleshooting items in this guide.
Matrox AuroraVX3mp – User Guide 22
3Cause
1Solution
The software may be using a display you didn’t intend to use or the software may be
configured to use more displays than the actual number of monitors you have. (For example,
you may be in DualHead Multi-Display mode but you only have one monitor.)
Disable the display:
Windows* XP –
(* Only while using multiple displays in independent mode. For more information, see PowerDesk help.)
1
2
Right-click your Windows desktop background, then click Properties " Settings.
Select the display you want to disable, then clear the Extend my Windows desktop onto
this monitor check box.
3
4Cause
Click OK or Apply for your changes to take effect.
The program window or dialog box may be somewhere off-screen.
1Solution
If the program window you want to see is named on the Windows taskbar, right-click on it
and select Maximize. (If you click Restore the program window goes back to its previous
position. To fix this problem, see the other solutions.)
2Solution
Manually move the program window or dialog box:
3Solution
1
Press [Alt]+[Space].
2
If you see a pop-up menu, click Move. If you don’t see a pop-up menu, press [M] (for
Move).
3
Press one of the arrow keys once and move your mouse pointer to where you want the
window or dialog box to appear, then click. The program window or dialog box should
appear where you clicked.
Windows XP –
1
Click the PowerDesk icon ( ) on your Windows taskbar to access the PowerDesk main
menu. To see the PowerDesk icon in Windows XP, you may need to click the Show
hidden icons button (
) on your Windows taskbar.
2
Click Desktop Management.
3
Enable one or more of the following features:
#
Open program windows
#
Maximize windows
#
Center dialog boxes and message boxes
23 Matrox AuroraVX3mp – User Guide
4
Choose where you want the program window or dialog box to appear.
For more information, see Matrox PowerDesk help.
Problem
Display on digital monitor appears blurry or uses only a portion of the
screen
1Cause
You may be using a lower display resolution than what your digital monitor supports. If your
monitor supports display scaling, the image on your screen may appear blurry. If display
scaling isn’t supported, the display may use only a portion of your screen.
1Solution
Select the highest display resolution available. This generally results in better image quality.
Matrox AuroraVX3mp – User Guide 24
Product information
Specifications
Matrox AuroraVX3mp
Grayscale support $ Hardware pivot $ Portrait monitor support $
Multi-display support in independent and stretched modes
Key features
Graphics chip architecture
Memory type
Based on Matrox 256-bit GPU
DDR (Double Data Rate) SDRAM
Memory
128 MB
Navigation Console
400 MHz
Twin Imaging Displays
165 MHz
Card type
PCIe ×16
Form factor
Low-profile
Connectors
1× KX20
Certifications*
Class A: FCC, CE, CSA, VCCI
* For more information, see page 32.
Supported display resolutions
Matrox AuroraVX3mp
Navigation Console (analog)
1600 × 1200 (landscape)
1200 × 1600 (portrait)
Twin Imaging Displays (digital)
1600 × 1200 (landscape)
1200 × 1600 (portrait)
or
2048 × 1536 (landscape)
1536 × 2048 (portrait)
Notes
!
For a list of supported monitor and partner solutions, see www.matroxmed.com.
Matrox AuroraVX3mp – User Guide 25
!
Your Matrox card is 100% VGA compatible and supports all VESA standards: VBE 2.0
(Super VGA modes), DPMS (energy saving), DDC-2B (Plug-and-Play monitor), and
DDC-CI.
!
The display resolutions and refresh rates available depend on your Matrox graphics card,
display driver, software monitor settings, and monitor. For information on the
capabilities of your monitor, see your monitor documentation.
!
Your primary display must be an analog monitor, and it must be used as your Navigation
Console.
!
While using Twin Imaging Displays, both displays must be the same type and use the
same monitor settings and display orientation.
!
While using stretched mode, a mouse pointer drawn by graphics hardware isn’t available
on Twin Imaging Displays.
!
Hardware overlay isn’t available on Twin Imaging Displays.
!
While using 3 displays at a time all at the highest display resolution, certain display
limitations may apply.
Digital monitor information
!
TMDS (Transition Minimized Differential Signaling) encoding
!
DDWG (Digital Display Working Group) compliant DVI connector
!
EDID (Extended Display Identification Data) 1.2, 1.3 (without the extended data block),
and 2.0 support
26 Matrox AuroraVX3mp – User Guide
Maximum card dimensions – Matrox AuroraVX3mp
≤0.75 in. / ≤1.91 cm
6.60 in. / 16.76 cm
0.331 in. / 0.84 cm
2.712 in. / 6.89 cm
Matrox AuroraVX3mp – User Guide 27
More information
We provide additional documentation in help files, Readme files, and Adobe Acrobat PDF (Portable
Document Format) files. To view or print PDF files, use the Adobe Reader program.
Customer support
Matrox medical imaging products are available for purchase through Matrox partners. To speak with
a Matrox sales representative, call 1-800-786-9836 in North America, or see the Matrox medical
imaging Web site for a list of our worldwide sales offices.
For more information, see the Matrox medical imaging Web site: www.matroxmed.com
For technical support, contact your dealer. This is the quickest and most effective method of technical
assistance. Your dealer is familiar with your complete system. In the case of hardware warranty
assistance, the product must be returned to the dealer, who will return it to Matrox.
If your Matrox product was provided by your computer manufacturer, contact this manufacturer. For
contact information, see your computer documentation or contact the vendor.
28 Matrox AuroraVX3mp – User Guide
Warranty
A. Limited Warranty Statement
1. Matrox Graphics Inc. (“Matrox”) warrants to the end-user customer, who provides adequate proof of purchase that
Matrox hardware products purchased from Matrox authorized dealers will be free from defects in materials and
workmanship for a period of one (1) year from the date of purchase. This warranty applies only to the original enduser purchaser and is non-transferable. Conditions and limitations of Matrox’s warranty are stated below.
2. Matrox’s limited warranty covers only those defects which arise as a result of normal use of the hardware and does
not apply to any:
a. improper or inadequate maintenance;
b. incompatibilities due to the user’s hardware or software applications with or in which the Matrox product
interfaces;
c. product of a special or custom-made nature;
d. unauthorized modification or misuse;
e. improper installation, misapplication or negligence;
f. operation outside the product’s environmental specifications;
g. improper site preparation or maintenance;
h. software;
i. other causes that do not relate to a product defect;
j. defects or damage suffered as a result of force majeure (including theft);
k. defects or damage suffered as a result of normal wear and tear; and/or
l. stolen goods.
3. If Matrox receives, during the applicable warranty period, notice of a defect in a warranted hardware product and the
defective Matrox product in question, Matrox shall at its sole option, either repair or replace the product, and shall
return the repaired product or a replacement product within a reasonable delay. The replacement product may not be
new, provided that it has functionality at least equal to that of the product being replaced.
4. This warranty is valid in any country where Matrox hardware products are distributed by Matrox or its authorized
dealers.
5. This Limited Warranty Statement gives the customer specific legal rights. The customer may also have other rights
which vary from state to state in the United States, from province to province in Canada, and from country to country
elsewhere in the world.
B. Limitations of Warranty
1. NEITHER MATROX NOR ANY OF ITS THIRD PARTY SUPPLIERS MAKES ANY OTHER WARRANTY OF ANY KIND,
WHETHER EXPRESSED OR IMPLIED, WITH RESPECT TO MATROX PRODUCTS. MATROX SPECIFICALLY
DISCLAIMS (and the customer, by accepting the Matrox product, specifically accepts such disclaimer and waives)
ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR OR INTENDED PURPOSE OR USE AND
THE WARRANTY AGAINST LATENT DEFECTS, WITH RESPECT TO THE HARDWARE AND/OR SOFTWARE.
MATROX FURTHER DISCLAIMS ANY WARRANTY THAT MATROX PRODUCTS, IN WHOLE OR IN PART, WILL BE
FREE FROM INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY OR PROPRIETARY RIGHTS.
2. To the extent that this Limited Warranty Statement is inconsistent with the law of the locality where the customer
purchases the Matrox product, this Limited Warranty Statement shall be deemed modified to be consistent with such
local law. Under such local law, certain limitations of this Limited Warranty Statement may not apply to the consumer.
3. To the extent allowed by local law, the remedies provided in this Limited Warranty Statement are the customer’s sole
and exclusive remedies.
29 Matrox AuroraVX3mp – User Guide
C. Limitations of Liability
1. EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN THE LIMITED WARRANTY STATEMENT, IN NO
EVENT SHALL MATROX BE LIABLE FOR:
a. any direct, indirect, special, incidental, consequential, foreseeable or unforeseeable, or punitive damages, whether
based on contract, tort, delict or any other legal theory and whether advised of the possibility of such damages;
and/or
b. damages arising from the loss of use, data, production revenue and/or profit of in connection with the Matrox
product or any business interruption.
2. Without prejudice to the foregoing, any liability of Matrox for any breach of warranty shall be limited to the amount
paid by the customer for the defective hardware in question.
3. To the extent allowed by local law, Matrox’s entire liability and the customer’s exclusive remedy shall be the repair or
replacement of any defective product during the warranty period. Matrox does not offer any other warranty with
respect to Matrox hardware or software or any other hardware or software.
4. Customer shall be responsible for all applicable taxes, duties and customs fees on any replacement unit, as well as
all transport, insurance, storage and other charges incurred on all returned products.
D. Obtaining Service
1. Verify that your Matrox product was installed and configured according to the information in its accompanying
documentation.
2. Read the “Troubleshooting” information included with your Matrox product and the documentation provided by your
dealer to see if you can solve the problem yourself.
3. If you are still experiencing difficulties, please contact your dealer where you purchased your Matrox product.
E. General
This limited warranty shall be governed by the laws of the Province of Quebec, Canada and the federal laws of Canada
applicable therein and the courts of the Province of Quebec shall have exclusive jurisdiction to hear and decide any
dispute instituted by the customer in connection with this limited warranty; the customer waives, by accepting the
product, its rights to institute proceedings in connection with this warranty against Matrox in any jurisdiction other than
Quebec.
Matrox AuroraVX3mp – User Guide 30
Software license agreement
Single User Products This Matrox software (the “Software”) is copyrighted by Matrox Graphics Inc. All rights are
reserved. The purchaser is granted a license to use the software only, subject to the following restrictions and limitations:
1. The license is for the original purchaser only, and is not transferable without written permission of Matrox.
2. The original purchaser may use the Software on a single computer owned or leased by the original purchaser. You
may not use the Software on more than a single computer, even if you own or lease more than one computer, without
written consent of Matrox.
3. The original purchaser may make back-up copies of the Software for his or her own use only, subject to the use
limitations of this license.
4. The original purchaser may not engage in, nor permit third parties to engage in, any of the following:
•
Providing or disclosing the Software to third parties.
•
Providing use of the Software in a computer service business, network, time-sharing, multiple CPU or multi-user
arrangement to users who are not individually licensed by Matrox.
•
•
Making alterations or copies of any kind in the Software (except as specifically permitted above).
Attempting to unassemble, de-compile or reverse engineer the Software in any way.
•
•
Granting sublicenses, leases, or other rights in the Software to others.
Making copies, or verbal or media translations, of the user’s guide.
•
Making telecommunication data transmissions of the Software.
Matrox reserves the right to terminate this license if there is a violation of its term or default by the Original Purchaser.
Upon termination, for any reason, all copies of the Software must be immediately returned to Matrox, and the Original
Purchaser shall be liable to Matrox for any and all damages suffered as a result of the violation or default.
Limited warranty
Matrox warrants to you, for a period of 90 days normal use from your date of purchase, that:
1. The CD/disks on which the software is furnished and the documentation are not defective.
2. The Software is properly recorded upon the CD/disks included.
3. The documentation is substantially complete and contains all the information Matrox deems necessary to use the
software.
4. The Software functions substantially as described in the documentation.
Matrox’s entire liability and your exclusive remedy shall be the replacement of any CD/Disks or documentation not
meeting these warranties, which is returned to Matrox or an authorized dealer, together with a copy of your paid receipt.
The above is the only warranty of any kind, either express or implied, including, but not limited to the implied warranties
of merchantability and fitness for a particular use that is made by Matrox on this Licensed Software. In no event shall
Matrox be liable to you or to any third party for consequential, special, indirect or incidental damages which you may
incur as a result of using the licensed software, including, but not limited to, loss of data, or information of any kind which
you may experience.
31 Matrox AuroraVX3mp – User Guide
Index
A
Portrait monitor
Setup 11
I
Adobe Acrobat
36
Installation
Hardware 5–6
Overview 4
B
IRQ
17, 22, 23
Bracket 5, 7
Product information
22
D
Display
Primary 17, 23
Setup 10–11
DualHead
Software
Setup 12
L
Low-profile bracket
Customer support
26
28–29, 36
13–15
S
BIOS
C
10, 11
PowerDesk
5, 7
T
M
Troubleshooting
Monitor
Connection setup
Portrait 11
Settings 18–20
Setup 10
10
Multi-display
V
VGA
16
W
Warning
H
P
Hardware
Acceleration 25
Information 13
Installation 5–6
PCI Express
PDF
8–9
16–27
Warranty
5, 6, 8, 10, 19, 21
28–29
6
36
Plug-and-Play
10
Matrox AuroraVX3mp – User Guide 32
USA
FCC Compliance Statement
Remark for the Matrox hardware products supported by this guide This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING Changes or modifications to this unit not expressly approved by the party responsible for the compliance
could void the user’s authority to operate this equipment. The use of shielded cables for connection of the monitor to
the card is required to meet FCC requirements.
CANADA
(English) Industry Canada Compliance Statement
Remark for the Matrox hardware products supported by this guide These digital apparatus does not exceed the
Class A limits for radio noise emission from digital devices set out in the Radio Interference Regulation of Industry
Canada.
(Français) Conformité avec les exigences du ministère de l’Industrie Canada
Remarque sur les produits matériels Matrox couverts par ce guide Ce present appareil numérique n’émet aucun
bruit radioélectrique dépassant les limites applicables aux appareils numériques de Classe A prescrites dans le
Règlement sur le brouillage radioélectrique édicté par Industrie Canada.
JAPAN
VCCI Compliance Statement
Remark for the Matrox hardware products supported by this guide This is a Class A product based on the
standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this
equipment is used in a domestic environment, radio disturbance may occur, in which case, the user may be required to
take corrective actions.
EUROPE
(English) European user’s information – Declaration of Conformity
Remark for the Matrox hardware products supported by this guide These devices comply with EC
Directive 89/336/EEC for a Class A digital device. They have been tested and found to comply with
EN55022/CISPR22 and EN55024/CISPR24. In a domestic environment these products may cause radio interference in
which case the user may be required to take adequate measures. To meet EC requirements, shielded cables must be
used to connect the monitor and other peripherals to the card. These products have been tested in a typical class A
compliant host system. It is assumed that these products will also achieve compliance in any class A compliant system.
(Français) Informations aux utilisateurs Européens – Déclaration de conformité
Remarque sur les produits matériels Matrox couverts par ce guide Ces unités sont conformes à la directive
communautaire 89/336/EEC pour les unités numériques de classe A. Les tests effectués ont prouvé qu’elles sont
conformes aux normes EN55022/CISPR22 et EN55024/CISPR24. Le fonctionnement de ces produits dans un
environnement résidentiel peut causer des interférences radio, dans ce cas l’utilisateur peut être amené à prendre les
mesures appropriées. Pour respecter les impératifs communautaires, les câbles de connexion entre le moniteur ou
autres périphériques et la carte doivent être blindés. Ces produits ont été testés dans un système hôte typique
compatible classe A. On suppose qu’ils présenteront la même compatibilité dans tout système compatible classe A.
(Deutsch) Information für europäische Anwender – Konformitätserklärung
Anmerkung für die Matrox Hardware-Produktunterstützung durch dieses Handbuch Diese Geräte entsprechen
EC Direktive 89/336/EEC für ein digitales Gerät Klasse A. Sie wurden getestet und entsprechen demnach
EN55022/CISPR22 und EN55024/CISPR24. In einer Wohnumgebung können diese Produkte Funkinterferenzen
erzeugen, und der Benutzer kann genötigt sein, entsprechende Maßnahmen zu ergreifen. Um EG-Anforderungen zu
entsprechen, müssen zum Anschließen des Monitors und anderer Peripheriegeräte an die Karte abgeschirmte Kabel
verwendet werden. Diese Produkt wurden in einem typischen, der Klasse A entsprechenden, Host-System getestet. Es
wird davon ausgegangen, daß diese Produkte auch in jedem Klasse A entsprechenden System entsprechend
funktionieren.
(Italiano) Informazioni per gli utenti europei – Dichiarazione di conformità
Nota per i prodotti hardware Matrox supportati da questa guida Questi dispositivi sono conformi alla direttiva
CEE 89/336/EEC relativamente ai dispositivi digitali di Classe A. Sono stati provati e sono risultati conformi alle norme
EN55022/CISPR22 e EN55024/CISPR24. In un ambiente domestico, questi prodotti possono causare radiointerferenze,
nel qual caso all’utente potrebbe venire richiesto di prendere le misure adeguate. Per soddisfare i requisiti CEE, il monitor
e le altre periferiche vanno collegati alla scheda grafica con cavi schermati. Questi prodotti sono stati provati in un tipico
sistema host conforme alla classe A. Inoltre, si dà per scontato che questi prodotti acquisiranno la conformità in qualsiasi
sistema conforme alla classe A.
(Español) Información para usuarios europeos – Declaración de conformidad
Observación referente a los productos de hardware de Matrox apoyados por este manual Estos dispositivos
cumplen con la directiva de la CE 89/336/EEC para dispositivos digitales de Clase A. Dichos dispositivos han sido
sometidos a prueba y se ha comprobado que cumplen con las normas EN55022/CISPR22 y EN55024/CISPR24. En
entornos residenciales, estos productos pueden causar interferencias en las comunicaciones por radio; en tal caso el
usuario deberá adoptar las medidas adecuadas. Para satisfacer las disposiciones de la CE, deberán utilizarse cables
apantallados para conectar el monitor y demás periféricos a la tarjeta. Estos productos han sido sometidos a prueba en
un típico sistema anfitrión que responde a los requisitos de la clase A. Se supone que estos productos cumplirán
también con las normas en cualquier sistema que responda a los requisitos de la clase A.
EUROPE
(English) European user’s information – Directive on Waste Electrical and
Electronic Equipment (WEEE)
Please refer to the Matrox Web site (www.matrox.com/environment/weee) for recycling information.
(Français) Informations aux utilisateurs Européens – Règlementation des
déchets d’équipements électriques et électroniques (DEEE)
Se référer au site Web de Matrox (www.matrox.com/environment/weee) pour l’information concernant le recyclage.
(Deutsch) Information für europäische Anwender – Europäische Regelungen zu Elektround Elektronikaltgeräten (WEEE)
Bitte wenden Sie Sich an dem Matrox-Website (www.matrox.com/environment/weee) für Recycling Informationen.
(Italiano) Informazioni per gli utenti europei – Direttiva sui rifiuti di apparecchiature
elettriche ed elettroniche (RAEE)
Si prega di riferirsi al sito Web Matrox (www.matrox.com/environment/weee) per le informazioni di riciclaggio.
Copyright © 2006 Matrox Graphics Inc. • (English) All rights reserved. • (Français) Tous droits réservés. • (Deutsch) Alle
Rechte vorbehalten. • (Italiano) Tutti i diritti riservati. • (Español) Reservados todos los derechos.
Trademarks • Marques déposées • Warenzeichen • Marchi registrati •
Marcas registradas
Matrox Electronic Systems Ltd. /
Matrox Graphics Inc.................................................. Matrox®, DualHead®, CenterWINDOW™, DeskNav™, Desktop
Navigator™, DVDMax™, GigaColor™, Matrox ASM™, Matrox
ATC™, Matrox AuroraVX3mp™, Matrox AuroraVX™, Matrox
Epica™, Matrox G400™, Matrox G450™, Matrox G550™, Matrox
DualHead2Go™, Matrox Marvel™, Matrox MED2mp™, Matrox
MED2mp-DVI™, Matrox MED3mp-DVI™, Matrox MED5mp-DVI™,
Matrox MED5mp™, Matrox Millennium™, Matrox MMS™, Matrox
Multi-Monitor Series™, Matrox MultiDesk™, Matrox P650™,
Matrox P650™ Low-profile, Matrox P750™, Matrox Parhelia™,
Matrox Parhelia™ APVe, Matrox Parhelia-512™, Matrox ParheliaLX™, Matrox Parhelia HR256™, Matrox PowerDesk™, Matrox
PowerSpace™, Matrox QID™, Matrox Quad Information Display™,
Matrox RAD™, Matrox Quick Connect™, MaxVIEW™, MGA™,
MGA-G100™, MGA-G200™, PixelTOUCH™, PrecisionCAD™,
Precision SGT™, PureVideo™, QuickDesk™, RAD2mp™,
RAD3mp™, RAD9mp™, RAD PCI™, RAD PCIe™, RADQ2mp™,
Rainbow Runner®, SonoVUE™, SPECTRUM™, TheatreVUE™,
TripleHead™
Adobe Systems Inc. ................................................. Acrobat®, Reader®
Dolby Laboratories, Inc. ............................................ Dolby®, Dolby Digital®
Intel Corporation ....................................................... Intel®, Pentium®
International Business Machines Corporation .......... IBM®, VGA®
Macrovision Corporation........................................... Macrovision™
Microsoft Corporation ............................................... Direct3D®, DirectDraw®, DirectShow™, DirectVideo™, DirectX™,
Microsoft®, MS-DOS®, PowerPoint™, Windows®, Windows
2000™, Windows XP™
Silicon Graphics, Inc. ................................................OpenGL®
Silicon Image, Inc. ..................................................... PanelLink™
U.S. Environmental Protection Agency ..................... Energy Star™
• (English) Registered trademarks are registered in the United States, Canada, and/or other countries. All other nationally
and internationally recognized trademarks and tradenames are hereby acknowledged. • (Français) Les marques
déposées sont déposées aux États-Unis, au Canada et/ou dans d’autres pays. Toutes les autres marques et tous les
autres noms déposés reconnus nationalement ou internationalement sont également reconnus par les présentes. •
(Deutsch) Die eingetragenen Warenzeichen sind in den USA, Kanada und/oder anderen Ländern registriert. Alle
sonstigen national und international bekannten Warenzeichen und Produktnamen werden hiermit anerkannt. • (Italiano)
I marchi registrati sono registrati negli Stati Uniti, in Canada e/o in altri paesi. Tutti gli altri marchi registrati e nomi
commerciali riconosciuti a livello nazionale e internazionale sono ugualmente riconosciuti qui. • (Español) Las marcas
registradas están registradas en los EE.UU., Canadá u otros países. Por medio del presente se reconocen todas las
demás marcas y nombres comerciales reconocidos a nivel nacional e internacional.
(English) Disclaimer
THE INFORMATION IN THIS GUIDE IS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT NOTICE.
Matrox Graphics Inc. reserves the right to make changes in specifications at any time and without notice. The
information provided by this document is believed to be accurate and reliable. However, no responsibility is assumed by
Matrox Graphics Inc. for its use; nor for any infringements of patents or other rights of third parties resulting from its use.
No license is granted under any patents or patent rights of Matrox Graphics Inc.
(Français) Responsabilité
LES INFORMATIONS CONTENUES DANS CE MANUEL PEUVENT ÊTRE MODIFIÉES À TOUT MOMENT SANS
PRÉAVIS.
Matrox Graphics Inc. se réserve le droit de modifier les spécifications à tout moment sans préavis. Les informations
contenues dans ce manuel sont reconnues comme étant précises et fiables. Cependant, Matrox Graphics Inc. n’assume
aucune responsabilité concernant leur utilisation, ni leur contrefaçon ou les autres droits des tiers résultant de leur
utilisation. Aucune licence n’est accordée sur aucun brevet ou droit d’exploiter un brevet de Matrox Graphics Inc.
(Deutsch) Haftungsablehnungserklärung
DIE IN DIESEM HANDBUCH ENTHALTENEN ANGABEN UND DATEN KÖNNEN OHNE VORHERIGE ANKÜNDIGUNG
GEÄNDERT WERDEN.
Die Matrox Graphics Inc. behält sich das Recht vor, jederzeit und ohne Ankündigung technische Daten zu ändern. Es
wird keine Garantie für die Richtigkeit des Inhalts dieses Handbuchs übernommen. Weiterhin übernimmt die Matrox
Graphics Inc. keinerlei Verantwortung für die Benutzung dieses Handbuchs, weder für Verstöße gegen Patentrechte
noch für andere Rechte Dritter, die aus seinem Gebrauch resultieren mögen. Es werden keinerlei Lizenzrechte gewährt
für sämtliche Patente oder Patentrechte der Matrox Graphics Inc.
(Italiano) Discrezionalità
LE INFORMAZIONI CONTENUTE NEL PRESENTE DOCUMENTO SONO SOGGETTE A MODIFICHE SENZA
PREAVVISO.
Matrox Graphics Inc. si riserva il diritto di apportare variazioni di qualunque tipo alle specifiche tecniche in qualunque
momento e senza alcun preavviso. Le informazioni contenute in questa documentazione sono ritenute corrette e
attendibili. In ogni caso, non è imputabile a Matrox Graphics Inc. nessuna responsabilità per il loro utilizzo, come
nessuna violazione a brevetti o diritti di altri produttori derivante dal loro utilizzo.
(Español) Renuncia
LA INFORMACION QUE CONTIENE EL PRESENTE MANUAL ESTA SUJETA A CAMBIOS SIN PREVIO AVISO EN
CUALQUIER MOMENTO.
Matrox Graphics Inc. se reserva el derecho de realizar modificaciones en cualquier momento y sin previo aviso. La
información facilitada en este documento se considera que es exacta y fiable. Sin embargo, Matrox Graphics Inc. no
asume ninguna responsabilidad por su uso; ni por cualquier infracción de patentes u otros derechos de terceras partes
derivados de su uso. No se concede ninguna licencia bajo cualesquiera patentes o derechos de patentes de Matrox
Graphics Inc.
Matrox Graphics Inc.
Deutschland
1055 Saint Regis Boulevard
Dorval, Quebec, Canada H9P 2T4
Matrox Electronic Systems GmbH
Inselkammerstraße 8
D-82008 Unterhaching bei München, Deutschland
Tel: (514) 822-6320
Sales: 1-800-361-1408
E-mail: graphics.sales@matrox.com
Technical support:
www.matrox.com/graphics/support
Web site: www.matrox.com/graphics
Asia Pacific
Matrox Asia Ltd.
Units 2405-6, 24/F ING Tower
308 Des Voeux Road Central
Sheung Wan, Hong Kong
Sales: 852-2281-5700
Fax: 852-2537-9530
E-mail – China, Hong Kong, and Taiwan:
Anthony.Lee@matrox.com
E-mail – All other Asia Pacific countries:
Info-AsiaPacific@matrox.com
Technical support: 852-2281-5757
E-mail: tech.asiapac@matrox.com
United Kingdom
Matrox UK
Sales: + 44 (0) 870 6065600
Fax: + 44 (0) 1753 665599
E-mail – UK, ROI, Benelux, France, Spain, Portugal, and
MEA: graphic.info.uk@matrox.com
Technical support: + 44 (0) 1753 665522
E-mail: graphic.tech.uk@matrox.com
Tel: + 49 (0) 89 621 70-0
Fax:+ 49 (0) 89 61 49 74 3
Vertriebs-Infoline: + 49 (0) 180 500 23 38*
* EUR 0,12 pro Minute: Telekom 01/2005
Technische Unterstützung: +49 (0) 89 62 17 03 33
E-mail: TechnischerSupport@matrox.com
Italia
Ufficio italiano di Matrox Graphics Inc.
3G electronics
Via Boncompagni, 3B
20139 Milano, Italia
Ufficio vendite: 02-5253095
Fax: 02-5253045
E-mail: vendite@treg.it
Supporto tecnico: www.matrox.com/graphics/it/support
Sito Web: www.matroxitalia.it
Download PDF