Uniwell | NX-5400 | User`s manual | Uniwell NX-5400 User`s manual

NX-5400
02 type
Operation Manual
2005-04-06
CONTENTS
ATTENTION............................................................................................................................................................................ 1
I. INTRODUCTION ............................................................................................................................................................... 2
II. INSTALLATION ............................................................................................................................................................... 3
Replacing Paper Rolls ...................................................................................................................................... 4
Replacing the Ribbons...................................................................................................................................... 4
III. DISPLAY........................................................................................................................................................................... 5
IV. KEY LAYOUT.................................................................................................................................................................. 6
V. OPERATION SEQUENCES........................................................................................................................................... 12
1.
2.
3.
Clerk Sign-on / Sign-off...................................................................................................................... 12
Clerk Interrupt System ........................................................................................................................ 13
PLU..................................................................................................................................................... 15
User Friendly PLU Programming in R position ................................................................................................... 16
a) Manual Price Entry........................................................................................................................................... 17
b) Repetition........................................................................................................................................................ 17
c) Multiplication.................................................................................................................................................. 17
d) Split Pricing .................................................................................................................................................... 18
e) Square Entry (Measurement Calculation) ....................................................................................................... 18
f) Price Shift ........................................................................................................................................................ 19
g) Menu Shift ...................................................................................................................................................... 19
h) Link PLU ........................................................................................................................................................ 20
i) Simple Condiment PLU ................................................................................................................................... 21
j) PLU Modifier................................................................................................................................................... 22
k) Single Item ...................................................................................................................................................... 23
l) Cooking Message & PLU Supplementary Message......................................................................................... 24
4.
5.
6.
7.
Kitchen Printer .................................................................................................................................... 25
Media Closing ..................................................................................................................................... 27
Tray Subtotal....................................................................................................................................... 28
Foreign Currency / Euro Currency...................................................................................................... 29
a) Closing Methods ............................................................................................................................................. 29
b) Currency Exchange ......................................................................................................................................... 29
c) Euro Currency System..................................................................................................................................... 30
8.
Cheque Cashing / Cheque Printing ..................................................................................................... 32
a) Cheque Cashing .............................................................................................................................................. 32
b) Cheque Printing on Slip Printer (TP-620) ....................................................................................................... 32
9.
Tip Operation ...................................................................................................................................... 33
a) Tip Amount Input............................................................................................................................................ 33
b) Change Kept As Tip........................................................................................................................................ 33
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
Mark-up / Mark-down......................................................................................................................... 34
Adjustment (Automatic % on Specific Items) .................................................................................... 35
Amount Plus / Amount Discount ........................................................................................................ 36
Last Item Correction ........................................................................................................................... 37
Void .................................................................................................................................................... 38
Transaction Void................................................................................................................................. 39
Refund / Media Refund....................................................................................................................... 40
Tax ...................................................................................................................................................... 42
R/A (Received on Account) ................................................................................................................ 44
P/O (Paid Out)..................................................................................................................................... 44
No Sale................................................................................................................................................ 44
Off Compulsory .................................................................................................................................. 45
Number of People ............................................................................................................................... 45
Message............................................................................................................................................... 46
Validation / Slip Validation ............................................................................................................... 47
Arrangement ....................................................................................................................................... 48
Recall .................................................................................................................................................. 49
Simple Track System - Item Track or Amount Track......................................................................... 50
• Track Number Entry Method -- Manual Track Number Method ..................................................................... 51
• Clerk Track Assignment Methods .................................................................................................................... 51
1) Free Clerk Track Assignment [SF-16.a=0] ..................................................................................................... 51
2) Clerk Track Assignment in Registration [SF-16.a=1]..................................................................................... 51
• Track Operation Sequences .............................................................................................................................. 51
A. Item Track System [SF-15.c=0] ..................................................................................................................... 52
a) Opening a New Track & Closing Temporarily................................................................................................ 52
b) Picking Up a Track & Closing a Track Finally ............................................................................................... 55
c) Track Transfer to a Designated Track ............................................................................................................. 58
d) Track Balance Calculation (display only) ....................................................................................................... 59
B. Amount Track System [SF-15.c=1] ................................................................................................................ 60
28.
29.
Previous Balance Plus (PB+) / Previous Balance Minus (PB-) .......................................................... 62
Ticket System...................................................................................................................................... 63
a)
b)
c)
d)
e)
30.
Real-Time Ticket Sample................................................................................................................................ 64
After Closing Ticket Sample........................................................................................................................... 65
Mixed Ticket Sample (two kinds of combined ticket)..................................................................................... 66
Multiple Ticket Sample................................................................................................................................... 67
Other Notes for Ticket..................................................................................................................................... 68
Cash Declaration ................................................................................................................................. 69
VI. TRAINING ....................................................................................................................................................................... 70
VII. PRINT CONTENTS....................................................................................................................................................... 71
1. Journal Print Contents ............................................................................................................................... 71
2. Receipt / Slip Print Contents ..................................................................................................................... 71
3. Post-Receipt .............................................................................................................................................. 71
VIII. REPORTS .................................................................................................................................................................... 72
REPORT SEQUENCE................................................................................................................................... 72
Required # for Individual Function Program Dump (X-85)........................................................................... 74
IRC REPORTS....................................................................................................................................................................... 75
TRANSACTION REPORT SAMPLES ............................................................................................................................... 77
IX. WARNING MESSAGES................................................................................................................................................ 84
THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
LA PRISE DOIT ETRE PRES DE L'APPAREIL ET FACILE D'ACCES.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Notes ============================================================
1. The contents of this manual are subject to change without notice.
2. We cannot be held responsible if other products, which are not approved by us, are used for options or
expendable supplies.
=================================================================
ATTENTION
Thank you very much for purchasing this Electronic Cash Registers. This ECR has many programmable features, hardware
combinations and options. Please consult your dealer as to your particular requirements, as this ECR can be configured,
through both hardware and software (programming) to suit a variety of different applications.
Please fill in the information requested below:
MODEL :
SERIAL No.:
DATE OF PURCHASE:
YOUR DEALER
(WHERE PURCHASED):
Phone/Fax/Address:
1
I. INTRODUCTION
This ECR is Hospitality POS terminals for Restaurants, Bars / Pubs and Quick Service having a lot of functions like scanning
system, clerk interrupt system and Inter Register Communication, and so on as follows;
Major Features
• Scanning system with 14 digits random PLU code having 18 digits PLU descriptor
• Standard 1570 PLUs, Max. 21666 PLUs
• User friendly PLU programming in SP & R positions
• 64 group-As, 25 group-Bs and 10 main group-As
• Clerk interrupt with 26 clerks or Simple track system
• Simple Track System - 30 item tracks or 30 amount tracks
• Transaction Void
• Simple Condiment PLU
• Euro Currency System
• Tray Subtotal Tendering
• ESF memory
• Ticketing Function
• 5 Media Keys + 4 Preset Tender Keys
• 4 Arrangement Keys (50 key steps)
• PC Batch Communication, Programming Module PLM 2000
• IRC (Inter Register Communication)
- 8 ECRs
- 4 kitchen printers TP-420/422/522/722, CBM-233/1000 via NA-710/730
- 4 slip printers TP-620
- PC communications with Tensai2000
2
II. INSTALLATION
rear display
1-line numeric
12 digits
printer cover
front display
1-line numeric
12 digits
paper window
validation slot
control lock
Unpacking
Check the contents for obvious physical damage.
Suggestions for installation
1)
The ECR should not be installed in extremely hot or cold places, or places which are exposed to direct sunlight for
extended periods of time.
2)
The ECR should not be installed where it may come into contact with excessive dust.
3)
The ECR should not come into contact with liquid.
Check the following before using ECR
1)
The required peripheral(s) has (have) been connected to the correct interface connector(s);
2)
The power plug is connected to the AC outlet;
3)
The control key is turned to the appropriate position;
4)
The appropriate number of paper roll(s) is (are) fitted.
If EE-99 is displayed
It indicates that ECR data might be collapsed because of a low battery condition by battery discharge while ECR is in stock
for a long period. Perform Physical RAM Test and Auto Preset, then leave ECR ON for minimum of 3 hours for battery
charge. Contact your distributor for the steps.
When you connect / disconnect the cable for the peripheral,
make sure that the AC cord is disconnected.
3
Replacing Paper Rolls
Regarding terminal printers, refer to the respective printer's User's Manual.
a)
b)
c)
d)
e)
f)
g)
Lift the printer cover.
Removing old paper:
Press the receipt or journal paper feed key to feed
the remaining paper through the printer or push the
green paper release lever towards the paper roll bed
and pull the paper through the printer. DO NOT
force paper through the printer as this may result in
damage to the printer mechanism or cause a paper
jam.
Inserting new paper:
Place the new paper in the correct position on the
printer's paper roll bed.
Make sure that the leading edge of the new paper
roll is cut straight across.
Set the paper release lever and insert the leading
edge into the printer slot.
In order to feed the paper, press the paper feed key
to the roll you are replacing.
In the case of the journal paper, insert the loose
end of the paper tightly to the slot of journal 'takeup' spool.
right
fine quality paper roll
44.5 mm x ø83 mm
< When paper jammed inside the paper guide >
Raise the paper guide by lifting both paper release
levers.
b) Remove the jammed paper by hand.
c) Close the paper guide.
d) Then, with both hands, gently press down both
sides of the paper guide.
a)
Replacing the Ribbons
INK RIBBON: ERC-32 (Epson)
a)
Lift the printer cover and remove the old ribbon.
b)
Turn the ribbon feed knob to stretch tight.
c)
While tilting the ribbon cassette forward slightly,
insert the ribbon between the print head and the
paper; push the ribbon cassette firmly into place.
d)
Turn the ribbon feed knob once more to stretch
tight the ribbon.
4
wrong
III. DISPLAY
FRONT DISPLAY
REG
2nd
2nd
3rd
PRICE MENU MENU
#
%
+/-
VD
RF
PO
RA
R-OFF
SUB
TOTAL
TOTAL
12 digits numeric (7 segments/digit)
REAR DISPLAY
12 digits numeric (7 segments/digit)
LAMP
REG
CONDITION
ON
FLASHING
2nd PRICE
ON
FLASHING
2nd MENU
3rd MENU
#
%
+/VD/RF
PO/RA
R-OFF
TOTAL
ON
FLASHING
ON
FLASHING
ON
FLASHING
ON
ON
FLASHING
ON
FLASHING
ON
FLASHING
ON
ON
FLASHING
MEANING
registration mode (clerk assignment condition)
comma is lit for PLU modify 1 mode
training mode
2nd price mode (price shift)
comma is lit for PLU modify 2 mode
ESF memory near full
2nd menu mode (menu shift 1)
comma is lit for PLU modify 3 mode
ESF memory near full
3rd menu mode (menu shift 2)
ESF memory near full
input of alphanumeric message
input of message in lower-case characters
mark-up/down operation
discount operation
adjustment operation
refund operation
void operation
received on account operation
paid out operation
receipt-off condition
payment amount
recall operation mode
5
IV. KEY LAYOUT
Stroke Keyboard
(BS)
(SPACE) (CAPS)
RPF
(DOUBLE)
CL
X2/FOR
TIME
7
8
A
2
3
D
1
2
4
E
0
00
14
O
15
X2/FOR and CLERK ID key names are different from the attached key sheet.
Control key position range:
There are three standard control keys (MA, Z, X).
MA key
Z key
X key
SP
LOCK
R
X
Z1/P
Z2
6
Ø
ITEM
(-)
*
P/O
R/A
Σ
Ö
%1
%2
REFUND
Å
TTL 1
Ü
#
/
BUFFER
MESSAGE PRINT 1
19
TTL 3
T
10
VOID
TTL 2
X
Y
!
5
Ä
W
&
CR
PRICE
18
S
9
J
17
13
N
Z
V
R
8
I
3
12
M
RECEIPT
OFF
U
Q
7
(SMALL)
PLU
16 REPEAT
11
L
H
6
P
6
G
9
C
5
K
1
B
4
JPF
F
CLERK
ID
TTL
VALID.
20
Æ
NO
SALE
SBTL
TTL 4
(ENTER)
CASH/TTL 5
Flat Keyboard
SP
61
70
79
88
92
96
62
71
80
89
93
97
LOCK
R
X
Z1/P
Z2
CLERK CLERK
1
2
@
2
1
1
Q
#
3
6
W
2
A
7
4
14
5
10
15
26
22
18
19
24
(SPACE) (SPACE) →
41
37
33
42
38
30
35
45
94
98
64
73
82
91
95
99
56
65
74
RPF
JPF
CL
X2/FOR
TIME
CR
BUFFER RECEIPT
PRINT 1
OFF
7
8
9
CLERK
ID
4
5
6
PLU
REFUND
REPEAT
1
2
3
0
00
•
83
57
66
75
PRICE
SHIFT
84
,
48
53
?
/
58
67
76
85
(BS)
49
54
59
(ENTER)
68
77
86
50
55
60
69
78
87
(CL)
40
90
←
>
.
44
81
Ü
52
47
43
(DBL)
51
Ö
Ä
:
Ø
<
Å
39
46
72
Σ
-
P
L
M
34
Ñ
0
O
K
N
29
36
32
28
£
9
I
J
B
25
31
27
23
*
8
U
H
V
20
&
7
Y
G
C
↓
21
17
13
Æ
6
T
F
X
9
16
12
8
%
5
R
D
Z
↑
11
E
S
3
$
4
63
7
SBTL
TTL 1
NO
SALE
CASH
TTL 5
KEY EXPLANATION
ADJUSTMENT
1, 2, 1 & 2
ARRANGEMENT
1~4
Automatic % Discount/Surcharge on Specific Items:
Calculates mark-up or mark-down on the subtotal amount of items which have been
preprogrammed as one of adjustable 1, 2 or 1 & 2 item. Note that adjustment does not
affect PLU sales memory which is shown on the reports.
Performs sequences of programmed steps (up to 50-key steps).
Useful for 1-key operations such as fixed sales or report-takes.
BALANCE
CALCULATION
Shows the balance and calculates the total of multiple tracks and displays their combined
total. Also, the balance can be divided; for example, between the number of customers.
BILL CANCEL
Releases the compulsory condition of a check-out bill issue for Item Track System.
BUFFER PRINT
1/2
-
-
BUFFER PRINT 1 key prints a post-receipt / bill (only the most recently registered
contents) including VAT data on a receipt in the receipt-off condition or on a slip when
the ECR is programmed for use with a slip printer while BUFFER PRINT 2 key prints a
post-receipt / bill without VAT data. However, the add-on tax data is printed.
BUFFER PRINT keys are used to print an Item Confirmation Receipt in Clerk Interrupt
System.
The second receipt issue by BUFFER PRINT keys is available by programming when
the ECR is not programmed for use with a slip printer.
Used for the manual line finder when the pre-feed line number is entered when using a
slip printer.
CHECK-OUT BILL
1/2
These keys are used in Item Track System.
- CHECK-OUT BILL 1 key prints the check-out bill with VAT data.
- CHECK-OUT BILL 2 key prints the check-out bill without VAT data.
- Also, CHECK-OUT BILL keys print the subtotal bill with or without VAT data when the
track number is entered or immediately after the track is closed by NEW BAL. (New
Balance) key.
CL
(Clear)
Cancels any information that is entered by ten-key or function key (P/O, R/A, tax shift, etc.)
before registration; also clears error conditions.
CLERK ID
Used for clerk sign-on and sign-off when using the secret clerk code system for entry into
registration.
COOKING MESSAGE
-
(for manual entry)
-
Enters one of supplementary messages 1 ~ 50 as a cooking message prior to a PLU
entry. If a number greater than 50 is entered, then the number will be printed.
Enters a cooking message manually prior to a PLU entry. Use the alphabet keys and
ENTER key to enter the message.
CR
(Correction)
Cancels the registration of the last-registered item including function key inputs such as %,
amount (-), etc.
(-)
(Amount Discount)
Subtracts an amount from the item or subtotal depending on the operation. It is possible to
register a preset amount or to override it manually.
F.C. SBTL
Displays the subtotal of the foreign currency by the depressions of F.C. SBTL key and the
foreign currency media key. The subtotal of foreign currency should be displayed
whenever the tendering amount in the foreign currency is entered.
(Foreign Currency Sbtl)
HALO RELEASE
HARD CLERK
1 ~ 15
Releases PLU HALO (High Amount Lock-Out) and compulsory condition of PLU stock
input.
Signs a clerk on or off without the clerk code entry.
Interrupts a clerk when another clerk signs on in Clerk Interrupt System.
8
HARD COOKING
MESSAGE 1 ~ 5
(for one-touch entry)
Registers one of supplementary messages 1 ~ 5 as a cooking message prior to a PLU
entry. Hard Cooking Message 1 key picks up supplementary message #1, Hard
Cooking Message 2 key picks up supplementary message #2 and so on.
HARD PLU
1 ~ 123
Registers a PLU with the preset price directly.
HARD PLU 1 key is used to complete the cash declaration which is used to confirm the
cash in drawer at the end of the day.
JPF
(Journal Paper Feed)
MEDIA REFUND
MENU SHIFT
1/2
MESSAGE
MISC.
VALIDATION
NET SBTL
NEW BAL.
(New Balance)
Advances the journal paper.
Used if a transaction to be refunded was closed by plural media keys. It is not required to
do if the transaction was closed by one media key. The refunded amounts are subtracted
from the respective media memory, but they are not memorized in the refund memory.
Shifts or cancels the PLU menu level. Via menu shift, the keyboard can have three
different menus. The menu shift remains for one registration, for one transaction or the
menu shift remains until the next shift key is pressed by programming.
Enters an alphanumeric message or digits (up to 19 digits).
Prints the item validation and the media validation.
The slip validation is available if the ECR is programmed for use with a slip printer.
Displays the net subtotal amount, not including add-on tax amount but including VAT tax
amount. Can be programmed to display and print, or display only.
-
NO SALE
OFF COMPULSORY
Temporarily closes a transaction including a track and saves the amount in New
Balance memory.
Under Clerk Interrupt System, this key stores a clerk’s transaction to Clerk Interrupt
Memory.
Used to open the drawer for no sale operations.
Releases compulsory conditions of validation, number of people input, message input, etc.
P/O
(Paid Out)
Records an amount of money withdrawn from the cash drawer when no customer
transaction has taken place.
%1~%3
Enters a percentage rate for mark-up or mark-down of an item or the subtotal amount
depending on the operation. Manual % rate is prohibited by programming.
PERSON
PLU MODIFIER
1~3
Enters a number of people (at a table). It is possible to override this number.
Modifies the PLU code or cancels the modifier. Using PLU modifiers, one PLU can be
changed to three other PLUs. This can be used for three sizes, kinds, etc.
The operation is permitted or prohibited by each PLU programming. Also, it remains for
one registration, for one transaction or the modifier remains until the next modifier key is
pressed by programming.
PLU / REPEAT
-
(+)
(Amount Plus)
Adds an amount to the item or subtotal amount depending on the operation. It is possible
to register a preset amount or to override it manually.
Used for code-entry PLU registration. Enter PLU code, then press this key.
Repeats registration of the last-registered item.
9
PB+ / PB(Previous Balance)
Enters the previous balance manually without using a track.
PB+ is used when the previous balance is positive.
PB- is used when the previous balance is negative.
PRESET TENDER
1~4
Enters a preprogrammed tendering amount directly by key depression. The tendering
amount is memorized in one of the total key (media) memories selected by programming.
PRICE
PRICE SHIFT
RECALL
RECEIPT OFF
RPF
(Receipt Paper Feed)
Manually overrides the price of a code-entry PLU. This key is not needed to override the
price of a hard PLU. Enter a price, press this key, then enter the PLU code and press
PLU/REPEAT key.
Shifts or cancels a second PLU price. The price shift remains for one registration, for one
transaction or the price shift remains until the next shift key is pressed by programming.
Displays the total amount of the last transaction during the current transaction.
Recall can be executed only when the last transaction is closed by direct media closing.
Inhibits receipt printing. However, post-receipt may be issued by pressing BUFFER PRINT
key.
Advances the receipt paper.
Records an amount of money received into the cash drawer when no customer transaction
R/A
(Received on Account) has taken place.
REFUND
Refunds a previously registered item.
SLIP OFF
Prints slip contents on the receipt before pressing BUFFER PRINT key or CHECK-OUT
BILL keys. Can be used when the ECR is programmed to use a slip printer.
SLIP RELEASE
STORAGE
SBTL
(Subtotal)
TABLE #
TAX
(only for add-on tax)
TAX SHIFT
1~4
Moves the slip printer’s "slip bed" down in the R control key position.
Stores a clerk’s transaction to Clerk Interrupt Memory when Clerk Interrupt System is used.
Displays the subtotal amount, including tax. Can be programmed to display and print, or
display only. When an add-on tax item is registered, this key is used in combination with
TAX SHIFT keys to display each taxable subtotal amount.
Table # assignment is available under clerk interrupt system only. However, it does not
pick up the transactions. Table # assignment is not available for the track system.
Calculates the add-on tax and prints and displays the tax inclusive subtotal.
Used, in combination with TAX SHIFT keys, to manually enter an add-on tax amount and
for tax exemption.
When a VAT item is registered, this key shifts the tax status to the designated tax.
When an add-on tax item is registered:
- Reverses the tax status.
- Allows the taxable subtotal amount to be displayed, in combination with SBTL key.
- Allows the tax amount to be entered manually, in combination with TAX key.
- Allows tax exemption by TAX key, if permitted by programming.
10
TEN-KEYS
(0 ~ 9, 00, 000, .)
For entry of numeric values, percentage rates, PLU codes, report number, programming
numbers, etc.
TICKET OFF
Temporarily cancels the ticket condition for one transaction when this key is pressed at the
beginning of a transaction in Ticket System.
TIP
Enters a tip amount. Amount can be entered as either an amount separate from payment
or as change from over-tendering.
TTL 1 ~ 4,
CASH/TTL 5
(media keys)
Closes transactions with or without a tendered amount.
- TTL 1 ~ 4 keys can be programmed as a foreign currency/Euro media/EFT
media/Cheque media using the TP-620 slip printer if programmed.
- TTL 5 key is fixed as a local currency media.
- TTL 5 key is used for cash declaration, report printing, track transfer and track
consolidation in combination with NEW BAL. key.
- TTL 5 key removes the error ECR in IRC communication in the X control key position.
TOTAL
VALIDATION
Prints the total validation.
The slip validation is available if the ECR is programmed for use with a slip printer.
TRACK #
-
Assigns a new track. Enter sequential track number 1 ~ 30 and press this key.
Picks up the temporarily closed track by entering track number and pressing this key.
T. VOID
(transaction void)
-
Executes all the entire registrations in a transaction with TTL 5 key depression. This
is available only before the transaction is closed.
Two-times depression cancels the transaction void.
TRAY SBTL
VOID
X1
X2 / FOR / TIME
Prints the total amount of items per purchased customer in a transaction.
Voids a previously-registered item within the same transaction. If permitted by
programming, a negative void operation can be done.
-
Used for a square entry (measurement calculation).
Used for a multiple ticket issue.
-
Multiplies a PLU or a Preset Tender key that has a preset tendering amount.
Used for a split pricing operation.
Divides track's balance by the number entered.
Displays the time '-HH-MM-SS-'.
11
V. OPERATION SEQUENCES
1. Clerk Sign-on / Sign-off
Each clerk should sign on before registration to ensure that sales data in his/her clerk memory is recorded
correctly. Even if a clerk does not sign off, when the next clerk signs on, he/she will be automatically signed off.
< Sign-On >
can be skipped under non-clerk interrupt system
CLERK
ID
R
---
R
HARD
--- CLERK By Hard Clerk Key
1 ~ 15
Display
c-01
--- clerk code ---
CLERK
By Clerk Code
ID
. 0
< Sign-Off >
R
---
CLERK
CLERK
By Clerk Code, Hard Clerk Key
--ID
ID
Display
-------. 0
12
2. Clerk Interrupt System
When the clerk interrupt system is selected by the programming [SF-12.a], even if a clerk is in a middle of
registrations, another clerk may interrupt the clerk.
The interrupted clerk's registration contents are stored in his/her clerk's memory and the clerk is automatically
signed off. The stored contents are restored by his/her clerk sign-on operation and he/she can continue the
registrations.
There are the following cases that a clerk's transaction is automatically stored in his/her memory:
- the same Hard Clerk key and Clerk Code are entered
- the sign-off operation is performed
- other clerk interrupts
- STORAGE key or NEW BAL. (New Balance) key is pressed
- by the automatic storage timer
Note that the receipt will not be printed until the clerk's transaction is closed finally by a media (total) key.
Instead of the receipt issue, Item Confirmation Receipt without tax data is issued to check a temporarily stored
registration contents.
< Item Confirmation >
This is available only when clerk's transaction is stored and if permitted by programming [SF-12.d].
To issue the item confirmation, perform the operation below after the transaction is stored.
BUFFER
BUFFER
prints stored contents of the last clerk
--PRINT
PRINT
HARD
BUFFER
--- CLERK prints stored contents of the specified clerk
PRINT
1 ~ 15
CLERK
CLERK
BUFFER
prints stored contents of the specified clerk
----- clerk code --ID
ID
PRINT
Notes.
- Item Confirmation will not include tax data.
- If an item confirmation is attempted for a clerk with zero balance, press CL key in order to reactivate the
keyboard.
- If the ECR is programmed for the slip printer, Item Confirmation is printed on the slip printer. If it is
required on a receipt, press SLIP OFF key first, then perform Item Confirmation operation.
- Table number assignment is available but the track function can not be used.
13
Clerk Interrupt System
KEY ENTRY
DISPLAY
HARD CLERK 1
c-01
JOURNAL
<01>
BEER
<01>
<02>
SODA
<02>
. 0
.00
3.00
3.00
.00
1.00
1.00
BEER
HARD CLERK 2
SODA
PL
C-02
PL
3.00
. 0
1.00
clerk 2 interrupts
clerk 1
-- timer --
c-02
1.00
stored automatically after the time limit expires
CONFIRMATION RECEIPT
Item confirmation of the specified clerk
BUFFER PRINT1 c-??
HARD CLERK 2
c-02
--- interrupted clerk's
balance printed by
[SF-12.e]
<02>
SODA
1.00
--------------------SUBTL BILL
1.00
#00115:36R
CLERK NAME 00002
1.00
consecutive # is not
printed
RECEIPT
HARD CLERK 1
c-01
3.00
<01>
CASH
5
3.00
BEER
3.00
CASH
3.00
#001-000005
15:40R
CLERK NAME 00001
consecutive # is printed
< Table Number Assignment >
4-digit table number assignment is available only for the clerk interrupt system. However, a transaction pick-up
by table number is not allowed.
KEY ENTRY
HARD CLERK 1
5 TABLE #
BEER
CASH
DISPLAY
c-01
. 0
tb-0005 .
PL
3.00
5
3.00
RECEIPT
<01>
*...5*
BEER
3.00
CASH
3.00
#001-000005
15:40R
CLERK NAME 00001
table number
<01>
table # printed in
double-width by [SF-7.c]
(not for KP)
*...5*
KITCHEN PRINTER
ECR NAME --> K.NAME01
<01> *...5* CLERK NAME 00001
1 BEER
< Note for Kitchen Printer Items >
Depending on programming [SF-81.b], items are transmitted to a kitchen printer only when a clerk's transaction
is finally closed by a media (total) key or every time when it is interrupted (closed temporarily).
14
3. PLU
There are three ways to enter a PLU.
1. Bar Coded PLUs which are PLUs programmed to be registered by a scanner.
Procedure: Scan the bar code labeled on each item while the control key is at the R position.
R
--- scan the PLU
2. H.PLU keys are keys which are allocated to the keyboard. Up to 123 keys are available.
Procedure: Press one of H. PLU keys while the control key is at the R position.
R
---
HARD
PLU
3. Code Entry PLUs are any PLUs which are not allocated to a key on the keyboard.
Procedure: Enter the code for the PLU using Ten-Keys and then press PLU key while the control key is at
the R position.
R
--- PLU code ---
PLU
REPEAT
Display & Print Sample of PLU
KEY ENTRY
DISPLAY
HARD CLERK 1
c-01
H.PLU 1
PL
scan bar coded PLU PL
RECEIPT
PLU-NAME 0000000001 1.00
PLU-NAME
5.00
. 0
1.00
5.00
Display & Print Sample of PLU: PLU code displayed and printed by [SF-68.g,h].
KEY ENTRY
DISPLAY
RECEIPT
P-------------1#
HARD CLERK 1
c-01
. 0
PLU-NAME 0000000001 1.00
P--490220103956#
PLU-NAME
5.00
[SF-68.h=1]
H.PLU 1
PL000001 1.00 [SF-68.g=1]
scan bar coded PLU 20103956 5.00 *
X2
PL49022010.39 * Only the last 12 digits of PLU code is shown on the display.
To check the first 10 digits, press X2 key.
15
User Friendly PLU Programming in R position
A new PLU having the scanned PLU code can be created in R position if [SF-67.b] is set to 1. All other data (like link group,
PLU flag, etc.) will be copied automatically from master PLU and sales data for this PLU will be registered in the newly
created PLU sales memory.
skip [SF-67.c=1]
(master PLU's descriptor is copied)
scanner
R
PLU code
max. 14 digits
PLU
REPEAT
Warn Mess#30
PLU not found
PLU descriptor
max. 18 characters
PLU price
max. 8 digits
Enter
X2
Master
PLU
[PF-5.d=1]
* Master PLU's preset data such as link group-A, flag condition, etc. except for link PLU, price and
descriptor will be copied to new created PLU. All PLUs can be entered here by scanner, PLU code
or H.PLU key.
16
Following are some samples of PLU operation sequences.
a) Manual Price Entry
A preset price for a PLU may be over-ridden with a manually entered price. Turning the control key to the X
position may be required by programming [SF-32.h] after the manual price is entered.
Bar Coded PLUs:
enter price manually ---
X
if required --- scan the PLU
Hard PLUs:
enter price manually ---
X
if required ---
Coded PLUs:
enter price manually ---
X
if required --- PRICE
HARD
PLU
--- enter PLU code ---
PLU
REPEAT
b) Repetition
The last registered PLU, including multiplication, can be repeated. Simply press REPEAT key the number of
times required immediately after a PLU entry.
KEY ENTRY
CARROT CAKE
PLU/REPEAT
DISPLAY
PL
4.00
02
4.00
RECEIPT
CARROT CAKE
CARROT CAKE
4.00
4.00
c) Multiplication
A PLU may be registered up to 999.999 quantities using Ten-Keys and X2 key.
Bar Coded PLUs:
enter the number of items ---
X2
--- scan the PLU
Hard PLUs:
enter the number of items ---
X2
---
HARD
PLU
Direct Multiplication
If programmed by [SF-68.a], Direct Multiplication of a Hard PLU (a multiplication without having to
press X2 key) is possible.
enter the number of items ---
Coded PLUs:
KEY ENTRY
2 [X2]
BEER
enter the number of items ---
DISPLAY
2.
.0
PL
2.50
HARD
PLU
X2
Manual price entry of a Hard PLU key is still made
possible by programming [PF-3.a].
--- enter PLU code ---
RECEIPT
2 X 2.50
BEER
17
5.00
PLU
REPEAT
d) Split Pricing
Split pricing can be done by using X2 key as shown in the sequence below.
enter the loose quantity ---
X2
--- enter the lot quantity ---
Two bottles of beer are sold from a six-pack.
KEY ENTRY
DISPLAY
RECEIPT
2 / 6 X 6.60
2 [X2]
2.
.0
BEER <6 btls>
6
2.
.6
[X2]
.333 -- a
BEER 6 btls
PL
2.20
2.20
X2
loose quantity / lot quantity X unit price
split price
a: The calculated split quantity is displayed after the lot quantity is entered and X2 key is pressed.
e) Square Entry (Measurement Calculation)
Square entry can be done by using X2 key and X1 key as shown in the sequence below.
enter the ratio to standard width ---
X2
--- enter the ratio to standard length ---
WRAPPING: 1.00 for width 1 meter and length 1 meter
When the WRAPPING with a measurement of 1.5 m (W) x 1 m (L) is sold
KEY ENTRY
DISPLAY
RECEIPT
1.5 X 1 X 1.00
1.5 [X2]
1.5
.0
WRAPPING
1.50
1
1.5
.1
[X1]
1.500
WRAPPING
PL
1.50
1.5: ratio to standard width
1 : ratio to standard length
After pressing X2 key, a number with a decimal can not be entered for the ratio to standard length.
18
X1
f) Price Shift
Every PLU can have two prices. One is used for the normal preset price and the other is used for happy hour
price, service price, etc.
Bar Coded PLUs:
X
if required ---
PRICE
SHIFT
--- scan the PLU
Hard PLUs:
X
if required ---
PRICE
SHIFT
---
Coded PLUs:
X
if required ---
PRICE
SHIFT
--- enter PLU code ---
Note:
HARD
PLU
PLU
REPEAT
The 2nd PRICE lamp is lit up when PRICE SHIFT key is pressed.
The price shift remains for one registration, for one transaction or until pressing PRICE SHIFT key depending on
programming [SF-69.e,f].
g) Menu Shift
The hard PLU key layout can be changed to three different preprogrammed layouts using two menu shift keys
by PGM-111 Menu Layout. Pressing the same menu shift key cancels the menu and pressing an other menu
shift key changes the menu.
Hard PLUs:
X
if required ---
MENU
SHIFT
---
R
if required ---
HARD
PLU
Note: The 2nd MENU lamp is lit up when MENU SHIFT 1 key is pressed.
The 3rd MENU lamp is lit up when MENU SHIFT 2 key is pressed.
The menu shift remains for one registration, for one transaction or until the next shift key is pressed, depending
on programming [SF-69.g,h].
19
h) Link PLU
Every PLU can be linked only one PLU. Each link PLU can have its own link PLU. This is limited to nine link
PLUs. When a PLU with a link PLU is registered, the link PLU is also registered automatically and the total
amount of the PLU and link PLU will be displayed.
Link PLU has a symbol " " on the receipt. If the link PLU does not need to be printed, then, "PLU not
printed" can be programmed by [PF-1.a] for the PLU. Also, a link PLU itself can be registered. This function is
useful for set menu or bottle return operations, etc.
Set Menu: SODA <M> is linked to HOT DOG SET.
POTATO is linked to SODA <M>.
KEY ENTRY
DISPLAY
RECEIPT
HOT DOG SET
HOT DOG SET
PL
7.00
SODA<M>
POTATO
Bottle Link: Bottle is linked to SODA <btl>
KEY ENTRY
DISPLAY
SODA <btl>
PL
.80
5.00
1.00
1.00
RECEIPT
SODA <btl>
bottle
.70
.10
(Note) For bottle return operations, the link PLU itself should be refunded.
Operations for PLU (main PLU) and link PLU are available as follows:
Available on both PLUs
Available on main PLUs only
Available on both PLUs
(depending on programming)
price shift
split pricing
void
refund
last item correction
mark-up / mark-down % on subtotal
adjustment (automatic % on specific items)
amount plus / discount on subtotal
manual price
tax shift
cooking message
mark-up / mark-down % on item
amount plus / discount on item
ticket item (Ticket setting for the link PLU belongs to the main PLU.)
single item
programmed supplementary message (automatic)
kitchen printer transfer (If a different kitchen printer is programmed by main PLU
and link PLU, both PLUs will be transmitted to each programmed kitchen printer.)
20
i) Simple Condiment PLU
Simple Condiment PLU (S.C. PLU) programmed by [PF-4.a] is a PLU printed with condiment mark " ".
It can be entered only with a main PLU. S.C. PLU input is compulsory if programmed by [PF-4.b].
SALAD has been set to Simple Condiment PLU.
KEY ENTRY
DISPLAY
STEAK
PL
12.00
SALAD
PL
2.00
RECEIPT
STEAK
SALAD
12.00
2.00
Operations on Simple Condiment PLU are available as follows:
Available
Not Available
manual price
price shift
split pricing
last item correction
mark-up / mark-down % on item, on subtotal
amount plus / discount on item, on subtotal
adjustment (automatic % on specific items)
ticket item (see Note below)
single item
tax shift
programmed supplementary message (automatic)
kitchen printer transfer --- printed in red (see Note below)
void (see Note below)
refund (see Note below)
cooking message
Note for Ticket
In the ticket system, S.C. PLU will have another ticket separately from the ticket of the main PLU.
Note for Kitchen Printer Transfer
If a different kitchen printer is programmed by main PLU and S.C. PLU, both PLUs are transmitted to each
programmed kitchen printer.
Note for Void
S.C. PLU is not voided at the same time when a main PLU is voided. First, void the main PLU, then void the
S.C. PLU.
Note for Refund
S.C. PLU is not refunded at the same time when a main PLU is refunded. First, refund the main PLU, then
refund the S.C. PLU. Refund of only the S.C. PLU is not available.
21
j) PLU Modifier
Using three modifier keys, one PLU can be changed to three different PLUs. Each modifier key is given a 3digit modifier value (left one digit shows value, right two digits show number of digit).
For example,
Then,
modifier value 1 is set at 105,
modifier value 2 is set at 205,
modifier value 3 is set at 305,
MODIFY 1 key places a fifth digit with a value of '1' to the PLU code.
PLU code 1001 is modified to PLU code 11001.
MODIFY 2 key places a fifth digit with a value of '2' to the PLU code.
PLU code 1001 is modified to PLU code 21001.
MODIFY 3 key places a fifth digit with a value of '3' to the PLU code.
PLU code 1001 is modified to PLU code 31001.
Bar Coded PLUs:
X
if required ---
PLU
--- scan the PLU
MODIFY
Hard PLUs:
X
if required ---
PLU
--MODIFY
R
---
Coded PLUs:
X
if required ---
PLU
--MODIFY
R
--- enter PLU code ---
The following PLU codes are set:
1001:
SODA <S> 0.60
11001:
SODA <M> 0.95
21001:
SODA <L> 1.25
31001:
SODA <LL> 1.50
KEY ENTRY
DISPLAY
SODA
PL
.60
MODIFY 1 -- a
PL
.95
SODA
,
MODIFY 2 -- b
SODA
MODIFY 3 -- c
SODA
PL
,
PL
HARD
PLU
PLU
REPEAT
RECEIPT
SODA
SODA
SODA
SODA
<S>
<M>
<L>
<LL>
.60
.95
1.25
1.50
1.25
1.50
,
a: Comma ", " is lit on the above REG lamp.
b: Comma ", " is lit on the above 2nd PRICE lamp.
c: Comma ", " is lit on the above 2nd MENU lamp.
Notes:
- To exit from the PLU modifier mode, press the same modifier key again.
- To change the value, press an other modifier key.
- Depending on programming [SF-70.a,b], this modifier value remains for one registration, for one transaction
or until the next PLU MODIFY key depression.
22
k) Single Item
A PLU that has been programmed as a single item automatically closes the transaction by a programmed total
key [SF-56.f~h]. This function is especially useful for the bar.
There are two types of single item transactions as follows:
Single-item 1: This can be used as normal registration with other non-single items and will not automatically
close the transaction.
enter the non-single item --- enter the single-item 1 --- can be continued ---
Single-item 2: This can be used with non-single items but will automatically close the transaction.
enter the non-single item --- enter the single-item 2 --- closed automatically
Single-item 1 = BEER [PF-1.h]
Single-item 2 = MARTINI [PF-1.g]
Non-single item = SANDWICH
KEY ENTRY
RECEIPT
BEER
BEER
2.50
CASH
2.50
Closed automatically
KEY ENTRY
SANDWICH
BEER
RECEIPT
SANDWICH
BEER
3.00
2.50
KEY ENTRY
MARTINI
KEY ENTRY
SANDWICH
MARTINI
Not closed
RECEIPT
MARTINI
4.50
CASH
4.50
Closed automatically
RECEIPT
SANDWICH
3.00
MARTINI
4.50
CASH
7.50
Closed automatically
Single item combination for a PLU with link PLU
Programmed as
Main PLU: single-item 1 or 2
Link PLU: non-single item or single-item 1 or 2
Main PLU: non-single item
Link PLU: single-item 1 or 2
Transaction will be
Only the main PLU is registered and closed automatically.
The link PLU is not registered.
Both PLUs are registered and not closed if link PLU is single-item 1.
If link PLU is single-item 2, it is closed automatically.
If a PLU and link PLU which are programmed as single items are entered with other non-single items, the transaction is
either closed or not closed depending on the selecting of single-item 1 (can be continued) or single-item 2 (closed
automatically).
23
l) Cooking Message & PLU Supplementary Message
< Cooking Message >
A PLU can have one cooking message that is entered by using COOKING MESSAGE key. The cooking
message can be either preprogrammed (one of 50 messages) or manually entered.
To enter a preprogrammed cooking message,
- press one of HARD COOKING MESSAGE 1 ~ 5 keys, OR
- enter a number (called the "Supplementary message number") from 1 to 50 and press COOKING
MESSAGE key.
- then, enter a PLU. The cooking message is printed under the PLU line on the receipt.
Cooking Message key: HAMBURGER with bacon (cooking message 7) is sold
KEY ENTRY
DISPLAY
RECEIPT
HAMBURGER
6.00
7 COOKING MESSAGE
. 7
with bacon
HAMBURGER
PL
6.00
# lamp is lit when COOKING MESSAGE key is pressed.
To manually enter a cooking message, press COOKING MESSAGE key first. Then enter any alphanumeric
message (up to 20 characters) and press ENTER key, then, enter a PLU.
Manual entry: Rare STEAK is sold (cooking message "rare" is manually entered)
KEY ENTRY
DISPLAY
RECEIPT
STEAK
15.00
COOKING MESSAGE
00-00
rare
rare [ENTER]
STEAK
PL
. 0 You can press X2 key for code entry. Refer to 24. Message for the
15.00 sequence (page 46).
If a wrong cooking message is entered, enter another cooking message or press CR key before a PLU entry.
If the repeat or multiplication operation is done on a PLU, the PLU with cooking message is also repeated or
multiplied.
< PLU Supplementary Message >
The supplementary message is the same as the cooking message (the same 1 ~ 50 messages are used) except that
it is programmed to be automatically printed when the PLU it is linked to is entered. It is printed above the PLU
line.
HAMBURGER (linked to the supplementary message number 7) is sold
KEY ENTRY
DISPLAY
RECEIPT
with bacon
HAMBURGER
PL
6.00
HAMBURGER
24
6.00
4. Kitchen Printer
The ECR sends PLUs that have been programmed to print at specific kitchen printers after the transaction is
closed by a media (total) key. In the clerk interrupt system, when a clerk's transaction is stored, the registered
items are transmitted to the kitchen printer by [SF-81.b].
Food: go to the kitchen (KP 1)
Drinks: go to the bar (KP 2)
SALAD: simple condiment PLU
ROAST BEEF has a preprogrammed supplementary message "french fries" and one link PLU "SOUP".
KEY ENTRY
RECEIPT
BEER
2.50
BEER
CHICKEN
9.00
1 COOKING MESSAGE
mild sauce
CHICKEN
SALAD
3.00
SALAD
french fries
ROAST BEEF
14.00
SOUP
1.00
BEER
2.50
CASH
32.00
QUANTITY
6
#001-000050
10:11R
CLERK NAME 00001
ROAST BEEF
BEER
CASH
KITCHEN PRINTER 1
AT KITCHEN
ECR
1
1
1
1
NO.1
-->
KITCHEN PRINTER 2
AT BAR
KITCHEN
CLERK NAME 00001
CHICKEN
mild sauce -- a
SALAD
-- b
french fries
ROAST BEEF
SOUP
ECR
2
NO.1
-->
BAR
CLERK NAME 00001
BEER
03APR/2002#001-000050 10:11
-- c
a: cooking message
b: simple condiment PLU
c: PLU supplementary message (centered)
03APR/2002#001-000050 10:11
Print Contents
- Pre-feed lines between cut line and last line is programmed by [SF-5.d,e,f].
- 1st line : the transmitting ECR name and the kitchen printer name are printed in double-width characters.
- 2nd line : the serving clerk's name is printed.
- The quantity and PLU descriptor are printed in double-width characters.
- PLU code is printed by [SF-87.c].
- Link PLU is printed with link PLU symbol " " if entered.
- Simple condiment PLU is printed in red without symbol " " if entered.
- If programmed by [SF-67.h], orders of the same item are combined together. A link PLU and simple condiment PLU
-
however are regarded as separate items from the same main PLUs. Also, they are transmitted to a kitchen printer which
has been set for them.
< Track # > in double-width is printed in brackets if entered.
* Table # * is printed in brackets if entered.
Refunded or negative voided items are printed in red.
Voided or corrected items in the same transaction are not printed.
Last line : date, machine number, consecutive number (double-width by [SF-5.a]) and time are printed.
Number of blank lines between cut line and last line are programmed by [SF-5.b,c].
Note for Mono-Ribbon
When a mono-ribbon is used in the kitchen printer, characters printed in red are printed in slim characters.
25
< Back-Up Kitchen Printer >
Depending on programming [SF-88], each kitchen printer may have been assigned a back-up in case of failure,
intentional shut down, changing paper rolls, etc. After a transaction is closed and the ECR attempts to send a
message to a down kitchen printer, an alarm sounds, and the one of warning messages (71 ~ 74) "kitchen printer
1 ~ 4 error" is displayed.
In the example below, KP 1 at the kitchen shuts down. KP 2 at the bar, programmed as the back-up, prints
orders from the kitchen. The warning message #71 (KP 1 error) is displayed on the ECR and all the data sent to
the kitchen printer (KP 1) which is down is printed on the back-up kitchen printer (KP 2). The data of the two
kitchen printers are printed according to increasing kitchen printer number.
KITCHEN PRINTER 2
AT BAR
ECR
1
1
1
1
NO.1
-->
KITCHEN
CLERK NAME 00001
header printed in red (or in slim if a mono-ribbon is set)
CHICKEN
mild sauce
SALAD
french fries
ROAST BEEF
SOUP
03APR/2002#001-000051 10:12
--------------------------------------------
ECR
2
NO.1
-->
BAR
CLERK NAME 00001
BEER
03APR/2002#001-000051 10:12
26
5. Media Closing
Up to five different media (total) keys may be used to close a transaction. Addition to these media keys, there
are four preset tender keys that close a transaction by one-action which have preset tendering amounts.
The following closing methods are available.
Direct Closing :
Press a media key directly.
registrations ---
Tendering Input :
TTL
Enter a tendered amount then press a media key.
Short tendering amount input prohibited for TTL 5 if [SF-64.b] is programmed.
registrations --- SBTL
--- enter tendered amount ---
TTL
When entered amount is over the due amount, the change is calculated automatically in cash if
"automatic change" has been programmed.
If "automatic change" has not been programmed, a designated media should be pressed for the
change as follows;
registrations --- SBTL --- enter tendered amount ---
Preset Tendering :
TTL
---
TTL
One-action closing to speed up tendering by use of a preset amount media key.
Preset tendering amount is memorized in the memory of pre-programmed media
number by [SF-58,59].
registrations --- SBTL
---
PRESET
TENDER
Media Multiplication : Makes it easier to sum up tendered amounts by using Ten-Keys and X2 key. This
function is available only when using one of four preset tender keys.
registrations --- SBTL --- enter number of pieces ---
X2
The following depend on programming:
- automatic change;
- tendered amount input prohibited or compulsory;
- drawer open after media closing;
- cheque-cashing functions (refer to 10. Cheque Cashing / Cheque Printing section);
- cheque printing (refer to 10. Cheque Cashing / Cheque Printing section).
27
---
PRESET
TENDER
6. Tray Subtotal
Tray Subtotal Function for the payment by a group of customers is used at a cafeteria where uses a tray to serve
Food & Drinks. Press TRAY SUBTOTAL key when item registrations are completed per customer. Then, the
total amount of items for each customer is printed on the receipt.
Tray Subtotal
KEY ENTRY
Customer A
Customer B
RECEIPT
BEER
1 COOKING MESSAGE
CHICKEN
SALAD
TRAY SBTL
BEER
CHICKEN
mild sauce
SALAD
TRAY SBTTL
ROAST BEEF
BEER
(TRAY SBTL)--- can be skipped
french fries
ROAST BEEF
SOUP
BEER
TRAY SBTTL
CASH
CASH
QUANTITY
2.50
9.00
3.00
14.50
----------
total amount of customer A
14.00
1.00
2.50
17.50
---------32.00
6
total amount of customer B
Notes:
- When using Tray Subtotal Function, "PLU not consolidated [SF-67.h=1]" must be programmed.
- Add-on tax amount is not included in tray subtotal.
28
7. Foreign Currency / Euro Currency
Any media may be programmed for foreign currency media except for TTL 5 key which is used for local
currency. Foreign Currency Media keys can be used the same way as a local currency media, including the
R/A, P/O and Cash Declaration operations.
a) Closing Methods
Direct Closing :
Press Foreign Currency Media key directly, without a tendered amount input.
Tendering Input :
Before a foreign currency tendering amount is entered, F.C. SBTL and F.C. Media keys
must be pressed to show the total amount in foreign currency. Then enter the foreign
currency tendering amount and press the same F.C. Media key again.
registrations ---
due amount of
enter foreign
F.C.
F.C.
F.C.
----- foreign currency --- currency
--SBTL
MEDIA
MEDIA
displayed
amount
The change is calculated automatically in local currency if "automatic change" has been
programmed. If "automatic change" has not been programmed, a designated media
should be pressed for the change.
Over-Tendering by Foreign Currency
KEY ENTRY
DISPLAY
RECEIPT
(item registrations)
F.C. SBTL
F.C. MEDIA
1500
F.C. MEDIA
(item registrations)
F
2
CH
10.00
1070
1500
4.02
-- a
-- b
-- d
-- e
DUE AMOUNT
0.9345
FC MEDIA
CHNGE
10.00
*
14.02
1500
4.02
a: due amount of local currency
c
d: tendering amount in foreign currency
e: change amount in local currency
(430 x 0.9345)
b: due amount of foreign currency
c: tendering amount in local currency is calculated from tendering amount
in foreign currency (1500 x 0.9345)
b) Currency Exchange
In order to exchange a foreign currency to the local currency, enter the foreign currency amount and press F.C.
Media key at the beginning of a transaction. The ECR automatically subtracts a service charge amount which is
calculated by a programmed charge rate. The currency exchange operation is allowed depending on
programming [SF-47,49,51,53.h].
KEY ENTRY
30000
F.C. MEDIA
DISPLAY
300.00
CA
266.33
RECEIPT
0.9345
FC MEDIA
CHARGE
CHNGE
*
280.35
30000
5
%
14.02
266.33
-- a
tendering amount in foreign currency
-- b
cashing amount in local currency
a: tendering amount in local currency is calculated from tendering amount in foreign currency (30000 x 0.9345)
b: charge amount in local currency is calculated from the programmed charge rate (280.35 x 5%)
29
c) Euro Currency System
A payment by the Euro currency is corresponded by an Euro media key. When a transaction is closed by Euro
media key, the due amounts in local and Euro currencies are printed on the receipt. If taxable items are included
in the transaction, the Euro taxable amount and tax are also printed separately from the local taxable amount and
tax. Euro amount is calculated by "local amount x Euro rate".
< Display Method of Euro Currency System >
When SBTL key is pressed during a transaction, the display switches between Euro and local currencies in one
second. Also, it can be manually switched by depression of SBTL key according to [SF-64.d] selection.
Display
Euro
Local
5.06
Euro
Local
10.00
< Print Formats of Euro Currency System >
Either "Euro and currency symbols are printed or not printed [SF-65.b]" and "one space or no space between
Euro currency & currency symbols and the amount [SF-64.h]" can be selected by programming.
Note: Tax lines in local and Euro currencies are printed when "VAT data printed" is selected.
The receipt format will be like the following samples;
1. Direct Closing by Local Currency in Euro Currency System
Euro & currency symbols printed
Euro & currency symbols not printed
PLU
DUE AMOUNT
PLU
DUE AMOUNT
LOCAL
10.00
DM 10.00
-----------5.06
1.00 =
DM 1.97719
-----------------------CASH
DM 10.00
VATSALE
DM 9.10
VAT
DM 0.90
-----------------------VATSALE
4.60
VAT
0.46
due amount (local)
--- only for reference --due amount (Euro) *1
Euro currency exchange rate *1
------------------------------directly closed by cash
VAT sales (local)
VAT amount (local)
--- only for reference --VAT sales (Euro) *2
VAT amount (Euro) *2
10.00
10.00
-----------EURO
5.06
EURO 1.00 = 1.97719
-----------------------CASH
10.00
VATSALE
9.10
VAT
0.90
-----------------------VATSALE EURO
4.60
VAT
EURO
0.46
*1
*1
*2
*2
*1 These are printed by [SF-65.a]. When "due amount in Euro currency printed" is selected, either "Euro currency
exchange rate is printed or not printed [SF-65.d]" can be selected.
*2 These are printed by [SF-24.a].
30
2. Direct Closing by Euro Currency
Euro & currency symbols printed
Euro & currency symbols not printed
PLU
DUE AMOUNT
PLU
10.00
DUE AMOUNT
LOCAL
10.00
EURO
5.06
EURO 1.00 = 1.97719
EURO
5.06
(= 10.00 )
VATSALE
9.10
VAT
0.90
-----------------------VATSALE EURO
4.60
VAT
EURO
0.46
10.00
DM 10.00
5.06
1.00 =
DM 1.97719
EURO
5.06
(= DM 10.00 )
VATSALE
DM 9.10
VAT
DM 0.90
-----------------------VATSALE
4.60
VAT
0.46
due amount (local)
due amount (Euro) --- always printed
*1
directly closed by Euro
*2
VAT sales (local) *3
VAT amount (local) *3
VAT sales (Euro) *3
VAT amount (Euro) *3
*1
*2
*3
*3
*3
*3
*1 Euro currency exchange rate is printed by [SF-65.d].
*2 Calculated amount in local currency is printed by [SF-64.e].
*3 These tax lines are printed by [SF-22.h].
3. Direct Closing by Foreign Currency in Euro Currency System
When "Foreign currency exchanged directly" is selected, the print format of foreign currency exchange rate will
be as follows;
Foreign currency exchange rate =
Foreign currency / Local currency
Foreign currency exchange rate =
Local currency / Foreign currency
PLU
DUE AMOUNT
PLU
DUE AMOUNT
10.00
DM 10.00
-----------FF 33.54
DM 1.00 * FF 3.353876
-----------FRANC
FF 33.54
(= DM 10.00 )
VATSALE
DM 9.10
VAT
DM 0.90
due amount (local)
due amount (foreign)
foreign currency exchange rate
directly closed by foreign currency
calculated amount in local currency
31
10.00
DM 10.00
-----------FF 33.54
DM 1.00 / FF 0.298162
-----------FRANC
FF 33.54
(= DM 10.00 )
VATSALE
DM 9.10
VAT
DM 0.90
8. Cheque Cashing / Cheque Printing
a) Cheque Cashing
In order to exchange a Cheque for local currency, enter the cheque amount and press a Media key which has
been programmed for cheque cashing at the beginning of a transaction. The ECR automatically subtracts a
service charge amount which is calculated by using a programmed charge rate.
b) Cheque Printing on Slip Printer (TP-620)
A cheque is printed only when the transaction is closed by press a Media key which has been programmed for
cheque depending on programming [SF-57.d].
The following contents are printed on a cheque using a slip printer (the print positions are programmable):
- cheque message
- total amount in normal-size characters
- total amount in double-width characters
- date
- ECR machine number, consecutive receipt number
Depending on programming [SF-57.c], there are two ways to print a cheque.
1. Manual cheque printing when a transaction is closed by Cheque Media key
Even if a cheque has not been set on the slip printer, the cheque printing data will be sent to the printer and a
warning message will be displayed on both the ECR and the slip printer.
2. Automatic cheque printing when a transaction is closed by Cheque Media key and a cheque has been
inserted into the slip printer
In this case, if a cheque has not been set on the slip printer when pressing Cheque Media key, the cheque
printing function will be automatically canceled and no warnings will appear.
Cheque Sample
*72.10* FEB31/2002 #001-000049
JOHN SMITH
6-22, Gion-Cho, Daito,
Osaka, Japan
PAY TO THE ORDER OF
$ *72.10*
SAKURA CORP OSAKA JAPAN
Seventy Two with 10/100
DOLLARS
The one the world can rely on.
3-5-25, Tenma, Kita-Ku,
Osaka, Japan
FOR
124 100064 1004
"
55258
13
0276
32
9. Tip Operation
A tip amount can be entered as either an amount separate from payment or as change from over-tendering.
a) Tip Amount Input
registrations --- enter a tip amount ---
KEY ENTRY
BEER
T-BONE STEAK
50 TIP
CASH
CASH
DISPLAY
--- TTL
--- close transaction or
continue registration
RECEIPT
.50
28.00
28.00
5
TIP
BEER
3.00
T-BONE STEAK
25.00
TIP
CASH
.50
CASH
28.00
QUANTITY
2
------------------MEDIA&TIP
CASH
28.50
printed by [SF-8.f]
Note for Tip Media Amount Print
If the tip media and the tendering media are the same key like the key sequence above, the tip amount and the tendering
amount are added together, then printed with a programmable message by [SF-8.f].
b) Change Kept As Tip
This function can not be done when the automatic change calculation has been programmed by [SF47,49,51,53,55.e].
registrations ---
SBTL
--- enter the over-tendered amount ---
TTL
---
TIP
---
TTL
(change will be the tip)
KEY ENTRY
BEER
T-BONE STEAK
SBTL
3000 CASH
TIP
CASH
DISPLAY
CH
5
RECEIPT
.50
.50
.50
BEER
T-BONE STEAK
SBTL
DUE AMOUNT
CASH
TIP
CASH
QUANTITY
3.00
26.50
29.50
29.50
30.00
.50
2
--------------MEDIA&TIP
CASH
30.00
33
printed by [SF-8.f]
10. Mark-up / Mark-down
The key operation determines whether the mark-up/-down is calculated on the item or subtotal. For mark-up/down on item, press % key immediately after the item is entered. For mark-up/-down on subtotal, press SBTL
key before pressing % key.
The following depend on programming [SF-40~42];
- a manual rate entry is permitted or prohibited;
- mark-up/down amount always affects or does not affect the taxable subtotal;
- mark-up/down on item or on subtotal operation permitted or prohibited.
Only for the mark-down, turning the control key to the Z1/P position may be set as required by programming
[SF-32.f].
enter manual rate, if required ---
Z1/P
if required ---
- %
Mark-up (on item) : %1 key has been programmed for mark-up of 5%
KEY ENTRY
DISPLAY
RECEIPT
BEER
BEER
PL
2.50
ROAST BEEF
ROAST BEEF
PL
14.00
% 1
%1
1
.70
CASH
CASH
%
5
17.20
Mark-down (on subtotal) with manual rate entry:
KEY ENTRY
DISPLAY
BEER
ROAST BEEF
SBTL
16.50
4
%2
CASH
2.50
14.00
5
%
.70
17.20
2
-.66
%2 key has been programmed for mark-down of 5%
RECEIPT
BEER
2.50
ROAST BEEF
14.00
SBTL
16.50
16.50 X
4%
% 2
.66
CASH
15.84
%
34
printed if programmed
11. Adjustment (Automatic % on Specific Items)
The adjustment function is provided for Membership discounts, Whole-sales prices, Employees, etc. Each PLU
can be assigned to one of three adjustments by programming [PF-1]. Mark-up and Mark-down are presettable
on each item, saving the trouble of manually entering rates.
The depression of ADJUST 1 key, ADJUST 2 key or ADJUST 1&2 key after entering items will calculate the
mark-up/down amount. After an adjustment key depression, only a closing operation by a media key or NEW
BAL. key is permitted.
Depending on programming [SF-36, 37], adjustment amount affects or does not affect the taxable subtotal, and
turning the control key to the Z1/P position may be set as required by programming [SF-33.e,f].
<Example>
ADJUST
Adjustment 1 key is used for price reduction (2%-)
1
ADJUST
Adjustment 2 key is used for price reduction (5%-)
2
ADJUST
Adjustment 1 & 2 key is used for price reduction (2%-, 5%-)
1&2
ADJUST 1 :
CAKE = Adjustable 1 item
COFFEE = Adjustable 2 item
KEY ENTRY
DISPLAY
CAKE
COFFEE
ADJUST 1
1
-. 3
CASH
+/- lamp flashing
RECEIPT
CAKE
COFFEE
1.50
1.00
1.50 X
2%
AJST1
.03
CASH
2.47
ADJUST 1&2 : CAKE = Adjustable 1 item
COFFEE = Adjustable 2 item
KEY ENTRY
DISPLAY
RECEIPT
CAKE
CAKE
COFFEE
COFFEE
1.50 X
ADJUST 1&2
3
-. 8
CASH
1.50
1.00
2%
AJST1
.03
1.00 X
5%
AJST2
.05
CASH
2.42
35
adjustable 1 amount x adjustment 1 rate
adjustment 1 amount
12. Amount Plus / Amount Discount
A plus/discount amount can be entered manually or the programmed amount is added/subtracted automatically.
The key operation determines whether the amount is added to the item or subtotal. For plus/discount on item,
press (+) or (-) key immediately after the item is entered. For plus/discount on subtotal, press SBTL key before
pressing (+) or (-) key.
The following depend on programming [SF-44,45];
- plus/discount on item or on subtotal operation permitted or prohibited;
- plus/discount amount always affects or does not affect the taxable subtotal.
Only for the discount operation, turning the control key to the Z1/P position may be set as required by
programming [SF-32.e].
enter manual discount amount, --if required
Z1/P
if required ---
Amount discount operation on item : (-) key is programmed for 0.30 discount
KEY ENTRY
DISPLAY
RECEIPT
HAMBUGER
HAMBURGER
3.50
COFFEE
COFFEE
1.00
DSCNT
.30
(-)
-.30
CASH
CASH
36
4.20
(-)
13. Last Item Correction
CR key is used to cancel the last-registered item.
Press CR key immediately after the wrong item or the wrong function key is registered. The corrected item is
never printed on the post-receipt, kitchen printer and slip printer.
COFFEE is corrected.
KEY ENTRY
CAKE
COFFEE
CR
DISPLAY
PL
1.50
PL
1.00
PL ,,,,,,,,,
1.00
CASH
5
RECEIPT
CAKE
1.50
COFFEE
1.00
------ CORRECTED -----CASH
1.50
1.50
PLU (HAMBURGER) with link PLU (COFFEE) is corrected.
KEY ENTRY
DISPLAY
RECEIPT
CAKE
PL
1.50
CAKE
HAMBURGER
HAMBURGER
PL
4.50
COFFEE
CR
PL ,,,,,,,,,
4.50
CASH
5
1.50
1.50
3.50
1.00
------ CORRECTED -----2 PS CORECT
CASH
1.50
37
number of corrected items is
printed
14. Void
VOID key is used to void an item which has been registered in the current transaction.
In order to void an item registered by a series of key depression, the same key operation must be repeated.
Bar Coded PLUs:
repeat same key operations
---
VOID
--- scan the PLU
---
VOID
---
(manual price, multiplication, etc.)
Hard PLUs:
repeat same key operations
(manual price, multiplication, etc.)
HARD
PLU
PLU
Coded PLUs:
repeat same key operations
VOID
--- enter PLU code ---
(manual price, multiplication, etc.)
---
REPEAT
Depending on programming [SF-32.d], turning the control key to the Z1/P position may be required to allow
voiding operations.
repeat same key
operations for voided item
--- Z1/P
if required ---
VOID ---
Two ICE CREAMs which are entered with manual prices are voided.
KEY ENTRY
DISPLAY
RECEIPT
ICE CREAM
100 ICE CREAM
CAKE
CAKE
ICE CREAM
100 ICE CREAM
2 X 1.00
2 [X2] 100 VOID
2
1.00
ICE CREAM
ICE CREAM
PL
CASH
5
-2.00
R
--- enter the PLU
1.00
1.50
1.00
2.00
VOID
CASH
1.50
1.50
< Kitchen Printer/Slip Printer >
The voided item is not printed on the kitchen printer and slip printer. Only the negative voided item is printed in
red (or in slim if a mono-ribbon is set) on the kitchen printer and in black on the slip printer with a minus symbol
but with no void message.
< Items in Track >
An item registered in a track can be canceled by voiding the previous item at any time before it is closed by a
media key.
38
15. Transaction Void
Transaction Void can be done if you wish to cancel all the registrations in a transaction.
This is available only before the transaction is closed.
In order to cancel all the registrations, simply press TRANSACTION VOID key.
Then, the ECR shows Warning Message #45 (means "are you sure to execute?").
Press CASH/TTL 5 key to execute it or press TRANSACTION VOID key again to cancel it.
registrations ---
CASH
T.VOID --- WM-#45 ----TTL 5
--- executes transaction void
--- T.VOID --- cancels transaction void
Depending on programming [SF-32.d], turning the control key to the Z1/P position may be required to allow
transaction void.
Transaction Void
KEY ENTRY
ICE CREAM
CAKE
T.VOID
CASH
DISPLAY
RECEIPT
ICE CREAM
CAKE
T.VOID
qE-45
---t_Void---
39
1.00
1.50
16. Refund / Media Refund
REFUND key is used to refund a registered item after the transaction has been closed.
The ECR will not check to see if the refunded item was actually registered except in the case of item track
operation before the track has been closed by a media key.
In order to refund an item registered by a series of key depression, the same key operation must be repeated.
Press REFUND key after entering the data (PLU code, manual price, etc.).
Bar Coded PLUs:
repeat same key operations
--- REFUND --- scan the PLU
(manual price, multiplication, etc.)
Hard PLUs:
repeat same key operations
--- REFUND ---
(manual price, multiplication, etc.)
Coded PLUs:
repeat same key operations
HARD
PLU
--- enter PLU code --- REFUND ---
(manual price, multiplication, etc.)
PLU
REPEAT
Depending on programming [SF-32.c], turning the control key to the Z1/P position may be required to allow
refunding operations.
repeat same key operations --for refunded item
ORANGE JUICE is refunded.
KEY ENTRY
DISPLAY
REFUND
Z1/P
if required ---
REFUND ---
R
--- enter the PLU
RECEIPT
. 0
ORANGE JUICE
PL
-2.00
CASH
5
-2.00
ORANGE JUICE
2.00
REFND
CASH
2.00
KITCHEN PRINTER
ECR
The refunded item is printed in red (or in slim if a
mono-ribbon is set) on the kitchen printer and in
black on the slip printer with a minus symbol but
with no refund message.
1
NO.1
--> BAR
CLERK NAME 00001
ORANGE
JUICE
03APR/2002#001-000060 11:11
40
Media Refund
This function is useful if a transaction to be refunded was closed by plural media keys. It is not required to do if
the transaction was closed by one media key.
By this operation, the refunded amounts are subtracted from the respective media memory, but they are not
memorized in the refund memory.
For example, when the transaction below is required to refund, then the operation sequence will be;
PLU-NAME 0001 1.00
PLU-NAME 0002 2.00
SBTL
3.00
DUE AMOUNT 3.00
1.00
CASH
CHECK
2.00
KEY ENTRY
REFUND
PLU 1
REFUND
PLU 2
MEDIA REFUND
100 CASH
MEDIA REFUND
CHECK
DISPLAY
PL
-1.00
PL
1
. 0
-2.00
. 0
-2.00
. 0
-2.00
RECEIPT
PLU-NAME 0001
1.00
REFND
PLU-NAME 0002
2.00
REFND
DUE AMOUNT
3.00
CASH
1.00
REFND
CHECK
2.00
41
media refund operation
17. Tax
Each PLU can have one of four taxes and they are calculated by either VAT method or Add-On Tax method.
VAT Method [SF-21.e~f=0]
Tax amount is included in the price. The tax shift is available however, manual tax amount entry and
manual tax exemption are not available.
Add-On Tax Method [SF-21.e~f=1]
Tax amount is charged separately from the price. Tax Rate or Tax Table selection is available for
each tax by [SF-21.a~d]. The tax shift, manual tax amount entry and manual tax exemption are
available.
The following items can be printed by programming:
- tax symbol printed or not printed [SF-22.d]
- taxable subtotal amount printed or not printed [SF-22.e]
- tax amount printed even if tax = 0 or not printed [SF-22.f]
- tax amounts printed separately or consolidated on one line [SF-22.g]
- VAT data printed or not printed (add-on tax data always printed) [SF-22.h]
- VAT taxable subtotal printed with tax or without tax [SF-22.c]
The following operations are possible only for the add-on tax items:
Taxable Subtotal Display
PLU entry ---
TAX
SHIFT
1~4
PLU entry ---
NET
SBTL
Net Subtotal Display
---
SBTL
The taxable subtotal is displayed by using the
proper TAX SHIFT key and SBTL key
immediately after registering the PLU.
Net subtotal without add-on tax amount is displayed with "
symbol. The amount is printed by [SF-81.c].
Manual Tax Entry
PLU entry --- manual tax amount ---
TAX
---
"
TAX
SHIFT
1~4
After it is performed, all other operations are prohibited, except for a media closing.
Manual Tax Exemption
(available if permitted by
programming [SF-23])
PLU entry ---
TAX
SHIFT
1~4
---
TAX
This may be used at the end of a transaction to exempt the whole transaction from a particular
tax rate, e.g. the whole sale could be exempted from Tax 2.
After it is performed, all other operations are prohibited, except for a media closing.
< Automatic Tax Exemption for Add-On Tax System >
If the tax exemption limit amount is programmed by PGM-108, the tax amount is automatically exempted
according to the taxable subtotal amount per entered number of people or per transaction by [SF-23.e~h].
42
< Tax Shift >
It is possible for both the VAT tax items and the add-on tax items:
Tax status is changed by TAX SHIFT 1 ~ 4 keys.
Tax Shift for Bar Coded PLU :
TAX
SHIFT
1~4
---
scanner
Tax Shift for Hard PLU :
TAX
SHIFT
1~4
---
HARD
PLU
TAX
PLU code entry --- SHIFT
1~4
---
PLU
REPEAT
Tax Shift for Coded PLU :
i) TAX SHIFT ON VAT TAX ITEMS
Depression of a tax shift key changes a tax status to a different VAT tax status.
TAX SHIFT 1 key
Non-taxable & VAT taxable
items are changed to ...
taxable 1
TAX SHIFT KEY PRESSED
TAX SHIFT 2 key TAX SHIFT 3 key
taxable 2
taxable 3
TAX SHIFT 4 key
taxable 4
ii) TAX SHIFT ON ADD-ON TAX ITEMS
Tax shift can also be used with the add-on tax items but in a way which is different from the VAT items. If the
pressed TAX SHIFT key number and the item's tax number are the same, the item will become non-taxable. If
the pressed TAX SHIFT key number and the item's tax number are different, the tax status will be both the
original item's tax status and the shifted tax status as follows:
ADD-ON TAX STATUS
Non-taxable item
TAXABLE 1 ITEM
TAXABLE 2 ITEM
:
TAXABLE 1 & 2 ITEM
TAXABLE 1 ~ 4 ITEM
TAX SHIFT KEY PRESSED
TAX SHIFT 1 key TAX SHIFT 2 key TAX SHIFT 3 key TAX SHIFT 4 key
taxable 1
taxable 2
taxable 3
taxable 4
non-taxable
1, 2
1, 3
1, 4
taxable 1, 2
non-taxable
2, 3
2, 4
:
:
:
:
2
1
1, 2, 3
1, 2, 4
2, 3, 4
1, 3, 4
1, 2, 4
1, 2, 3
The function of TAX SHIFT keys depends on which tax method is selected for each of the four taxes. Tax shift
for the VAT system affects only VAT tax items and tax shift for the add-on system affects only add-on tax items.
For example, Tax 1 and 2 are VAT method, tax 3 and 4 are add-on tax method, PLU 1's tax status is tax 1 & 3:
PLU 1's TAX STATUS
TAX 1 (VAT method)
TAX 3 (add-on tax method)
PLU1's tax status will be
TAX SHIFT KEY PRESSED
TAX SHIFT 1 key TAX SHIFT 2 key TAX SHIFT 3 key TAX SHIFT 4 key
(VAT)
(VAT)
(add-on tax)
(add-on tax)
no change
taxable 2
no change
no change
no change
no change
non-taxable
taxable 3 & 4
taxable 1 & 3
taxable 2 & 3
taxable 1
taxable 1, 3, 4
43
18. R/A (Received on Account)
Records an amount of money received into the cash drawer when no customer transaction has taken place (i.e. in
order to register the money prepared for change into the ECR memory).
50.00 x 1 piece and 5.00 x 10 pieces are entered
KEY ENTRY
DISPLAY
R/A
rA
. 0
5000 CASH
10 [X2]
PRESET TENDER 1
R/A
5
RECEIPT
CASH
CASH
R/A
50.00
5
rA
50.00
50.50
100.00
Media multiplication can only be done using a preset tender media key.
PRESET TENDER 1 key has been assigned to CASH/TTL 5 memory.
50.00
100.00
19. P/O (Paid Out)
Records an amount of money withdrawn from the cash drawer when no customer transaction has taken place.
50.00 is withdrawn.
KEY ENTRY
P/O
DISPLAY
Po
5000 CASH
P/O
5
Po
RECEIPT
. 0
CASH
P/O
50.00
50.00
-50.00
-50.00
20. No Sale
For opening the drawer when no transaction has taken place. Simply press NO SALE key. Depending on
programming [SF-32.g], turning the control key to the X position may be required.
No sale operation is not printed on receipt (printed on journal) in order to save paper if [SF-5.f] is selected.
X
if required ---
NO
SALE
"0.00" or ".00" Print and Display
You can choose ".00" or ". 0" for display by the flag selection [SF-57.a] and "0.00" by [SF-56.a~e].
DISPLAY
[SF-57.a=0]
RECEIPT
. 0
NSALE
. 0
[SF-47~55.b=1]
[SF-57.a=1, SF-56.a~e=1]
0.00
NSALE
0.00
[SF-47~55.b=0]
[SF-57.a=1, SF-56.a~e=0]
.00
NSALE
.00
[SF-47~55.b=0]
44
21. Off Compulsory
OFF COMPULSORY key is used for the temporary release of all compulsory conditions.
For example, under a track number entry compulsory condition, press OFF COMPULSORY key at the
beginning of a transaction for release of the compulsory condition.
Depending on programming [SF-33.g], turning the control key to the Z1/P position may be required in order to
use OFF COMPULSORY key.
Z1/P
if required ---
OFF COM--PULSORY
R
---continue registrations
22. Number of People
It is possible to input 99 people with PERSON key. Overriding input is also possible.
enter the number of people --- PERSON
KEY ENTRY
2 PERSON
BEER
RED WINE
CASH
DISPLAY
RECEIPT
BEER
RED WINE
CASH
QUANTITY
PERSN
P- 2
2.50
3.00
5.50
2
2
number of people
Clerk Interrupt System
<01>
BEER
RED WINE
CASH
QUANTITY
2
2.50
3.00
5.50
2
number of people
If a post-receipt is printed by BUFFER PRINT key in the receipt off condition, number of people is printed at right
of the clerk name.
POST-RECEIPT
BUFFER PRINT
Served by
CLERK NAME 00001
2
BEER
2.50
RED WINE
3.00
CASH
5.50
QUANTITY
2
45
number of people
23. Message
Up to 19 digits of number or message inputs are possible with MESSAGE key.
Number Input:
enter number --- MESSAGE
Message Input:
MESSAGE
KEY ENTRY
123456789
MESSAGE
MESSAGE
A
B
C
ENTER
DISPLAY
1234567.89
KEY ENTRY
MESSAGE
X2 (for code entry)
DISPLAY
00-00
00
00-00
34
01-34
35
02-35
36
03-36
--- enter message --- ENTER
RECEIPT
MESS1
123456789#
MESS1
ABC#
00-00
01-34
02-35
03-36
alphabet entry mode
03: number of characters, 36: character code for C
. 0
34 (for A)
35 (for B)
36 (for C)
ENTER
Alphabet entry mode and Code entry mode is toggled by X2 key
depression.
code entry mode
. 0
Used Keys
CAPITAL
↑ up arrow
SMALL
↓ down arrow
DOUBLE
BACK SP
SPACE
RPF
← left arrow
JPF
→ right arrow
X2
CL
ENTER
Functions
to enter upper-case letters for the stroke keyboard
for the flat keyboard
to enter lower-case letters for the stroke keyboard
for the flat keyboard
to enter a double-width character (press this key after each character entry)
to enter a back space
to enter a space
to shift cursor left for the stroke keyboard in the code entry mode
for the flat keyboard
to shift cursor right for the stroke keyboard in the code entry mode
for the flat keyboard
to toggle between Alphabet entry mode and Code entry mode
to cancel character input before pressing ENTER key
to finish character input
Character Code Table
A
B
C
D
E
F
G
H
I
J
K
L
M
34
35
36
37
38
39
40
41
42
43
44
45
46
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
47
48
49
50
51
52
53
54
55
56
57
58
59
a
b
c
d
e
f
g
h
i
j
k
l
m
66
67
68
69
70
71
72
73
74
75
76
77
78
n
o
p
q
r
s
t
u
v
w
x
y
z
79
80
81
82
83
84
85
86
87
88
89
90
91
46
0
1
2
3
4
5
6
7
8
9
#
$
%
17
18
19
20
21
22
23
24
25
26
04
05
06
&
'
£
Ñ
*
Å
.
/
space
:
Ø
07
08
09
10
11
13
14
15
16
01
27
28
<
Σ
>
?
@
Ä
Ö
Ü
Æ
doublewidth
29
30
31
32
33
60
61
62
63
96
97
24. Validation / Slip Validation
Validation on the ECR's internal printer is available. Validation on the slip printer is also available if the ECR is
programmed for use with a slip printer TP-620 and a slip paper is inserted before VALIDATION key is pressed.
They can be issued for any item after it is registered, any media after payment is made, or for the total after the
transaction is closed.
Item & Media Validations:
---
MISC.
VALID.
insert validation paper after a transaction is closed ---
TTL
VALID.
insert validation paper after an item or a
media is registered
Total Validations:
KEY ENTRY
BEER 6 BOTTLES
insert a paper for item validation
MISC. VALID.
CASH
insert a paper for media validation
MISC. VALID.
insert a paper for total validation
TTL VALID.
RECEIPT
BEER 6 BOTTLES
6.60
CASH
6.60
FEB15/2002#002-0001 BEER 6 BOTTLES
6.60
FEB15/2002#002-000001 CASH
6.60
FEB15/2002#002-000001 AMONT
6.60
time printed by [SF-9.a] FEB15/2002#002-000001 11:43 AMONT
6.60
The following depend on programming by [SF-9]:
- Validation is compulsory or is not compulsory
- Validation can be printed only one time or an unlimited number of times
- Validation printed by upside-down or normal character (not available for the slip printer)
- Time printed or not printed
47
25. Arrangement
There are four kinds of arrangement keys. Up to 50-key steps operations can be assigned to each one of the
Arrangements. Execution of programmed steps can be performed by depression of the appropriate
ARRANGEMENT 1 ~ 4 key.
Example 1: ARRANGEMENT 1 key is programmed for an automatic discount and closing operations as
follows:
SBTL
KEY ENTRY
SALMON STEAK
ARRANGE 1
---
(-)
---
CASH
TTL5
DISPLAY
PL
15.00
5
14.70
(-) key is programmed for 0.30 discount
RECEIPT
SALMON STEAK
15.00
SBTL
15.00
DSCNT
.30
CASH
14.70
Example 2: ARRANGEMENT 2 key is programmed for assorted reports.
X-03 Full Transaction report (3, X2, TTL5)
X-05 Hourly report (5, X2, TTL5)
X-10 Clerk report (1, 0, X2, TTL5)
Operation
Turn the control key to the X position and press ARRANGEMENT 2 key. Then, above reports will
automatically be printed.
48
26. Recall
The total amount of the last transaction which has been closed directly by a media key can be recalled by
RECALL key. The receipt of the last transaction is issued when the transaction is directly closed. After that, no
additional receipt is issued during the recall operation. A transaction which has been closed with amount
tendered can not be recalled.
The recalled transaction must be closed by a media key with a tendering amount entry. It is canceled by CL key.
Payment for the last transaction
registration ---
RECALL --- enter tendering amount ---
TTL
--- continue current transaction
During recall operation, TOTAL lamp flashes.
Recall of the transaction which is closed by a foreign currency media
When the last transaction is recalled, the closed foreign currency media key name and the total amount in local
currency is displayed. Before entering the foreign currency tendering amount for the last transaction, F.C.
SBTL key and the specific foreign currency media key must be pressed.
Payment for the last transaction
F.C.
F.C.
F.C.
enter F.C. tendering
continue current
--------SBTL
MEDIA
MEDIA
amount
transaction
registration --- RECALL ---
During recall operation, TOTAL lamp flashes.
The last transaction is recalled during the current transaction
KEY ENTRY
DISPLAY
RECEIPT (last transaction)
(current transaction)
STEAK
PL
15.00
WINE
PL
6.00
SALMON STEAK
11.00
WINE
6.00
CASH
17.00
(recall the last transaction) --- TOTAL lamp flashes during a recall operation
RECALL
5
2000 CASH
CH
17.00
displays the last transaction's total amount
3.00 Tendering amount input compulsory except when using PRESET
TENDER key. If the automatic change is not programmed, a designated
media must be pressed to calculate the change.
(continue the current transaction)
TOMATO SALAD
CASH
PL
5
RECEIPT (current transaction)
STEAK
15.00
WINE
6.00
TOMATO SALAD
5.00
CASH
26.00
5.00
26.00
49
27. Simple Track System - Item Track or Amount Track
Limitations
- Clerk interrupt system can not be used.
- Table number assignment is not available.
Following contents are described in this section.
- Two Track Systems
- Track Number Entry Method
- Two Clerk Track Assignment Methods
- Track Operation Sequences
• Track Systems --- One of Item or Amount Track System can be used.
Item Track System [SF-15.c=0]
# of Tracks
Track # Entry
# of Items per Track
Characteristics
Table Assignment
Clerk Track
Assignment
Post-Bill
Subtotal Bill
Check-Out Bill
Track Transfer
Standard (max.) 30 tracks are handled.
Sequential 1 ~ 30 track numbers can be
entered manually.
Registers up to 107 items.
(item includes tax data, transaction data)
Records detailed registration contents.
Track is identified by Track #.
Track can be temporarily closed by NEW
BAL. , until finally closed by a media key.
Tax is printed each time the track is closed
or it is printed only when the track is finally
closed by a Media key depending on
programming [SF-16.g].
Not available
Available by [SF-16.a]
Amount Track System [SF-15.c=1]
Same as Item Track System
Same as Item Track System
Not available
Records only transaction totals.
Same as Item Track System
Same as Item Track System
Same as Item Track System
Not available
Available
Shows the last transaction contents
immediately after the track is closed by
pressing BUFFER PRINT key. This can be
used as a Check-Out Bill if Post-Bill is
issued every time when the track is closed.
Temporarily closed Track contents printed
by CHECK-OUT BILL key. This is used
to check the track contents and it can be
used as a Check-Out Bill if programmed.
Entire contents of finally closed Track
printed by CHECK-OUT BILL key.
Available
50
Same as Item Track System
Not available
Not available
Available
• Track Number Entry Method -- Manual Track Number Method
The track is assigned by manually entering sequential track number 1 ~ 30 with the depression of TRACK #
key.
enter track #1 ~ 30 ---
TRACK
--- new track number is assigned
#
After a track is finally closed by a media key, the track number can be used again.
• Clerk Track Assignment Methods
1) Free Clerk Track Assignment [SF-16.a=0]
Any clerk can open, access and close any track.
2) Clerk Track Assignment in Registration [SF-16.a=1]
Any clerk may open a new track, however, subsequent entries to the track are restricted to the clerk who
originally opened the track.
• Track Operation Sequences
A. Item Track System
a) Opening a New Track & Closing Temporarily
< Opening a New Track >
< Closing a Track Temporarily >
< Issuing a Post-Bill and/or Subtotal Bill >
b) Picking Up a Track & Closing a Track Finally
< Picking Up a Track >
< Closing a Track Finally >
< Issuing a Check-Out Bill >
c) Track Transfer to a New Track or a Designated Track
d) Track Balance Calculation (display only)
B. Amount Track System
All functions, except Check-Out/Subtotal Bill issues, are the same as the item track system.
51
A. Item Track System [SF-15.c=0]
a) Opening a New Track & Closing Temporarily
< Opening a New Track >
Enter a sequential track number (1 ~ 30) and press TRACK # key.
enter track # ---
TRACK
#
--- new track number is assigned
A track number may be assigned at anytime while in a transaction.
< Closing a Track Temporarily >
Enter registrations as normal and then, it can be closed temporarily through NEW BAL. key.
KEY ENTRY
1 TRACK #
DISPLAY
[0000001]
RECEIPT
.
SALMON STEAK
BEER
NEW BAL.
nb
13.50
<......1>
.00
SALMON STEAK
11.00
BEER
2.50
CURENT CHG
13.50 current charge printed by [SF-15.d]
N.B
13.50
QUANTITY
2
#001-000001
19:13R
CLERK NAME 00001
52
< Issuing a Post-Bill and/or Subtotal Bill >
Immediately after a track is closed temporarily, if CHECK-OUT BILL key is pressed, a Subtotal Bill which
shows the track contents is printed. If BUFFER PRINT key is pressed, a Post-Bill which shows only the last
track's contents is printed.
open track --- register items ---
NEW
BAL.
--- track temporarily closed ---
CHECK
-OUT
--- Subtotal Bill is issued
BILL
open track --- register items ---
NEW
BAL.
--- track temporarily closed ---
BUFFER
--- Post-Bill is issued
PRINT
(one time)
After a Post-Bill is issued, a Subtotal Bill can be still issued by entering the track number and pressing CHECKOUT BILL key.
enter track # ---
CHECK
-OUT
--- Subtotal Bill is issued
BILL
Post-Bill (See Sample 1 on the next page.)
Post-Bill shows the last transaction's contents on a receipt in the receipt-off condition or on a slip if programmed
to use.
* Automatic Line Finder
If a Post-Bill of the track has been issued previously, the automatic line finder advances the Post-Bill
past the previously-printed area, and prints only the last transaction's contents as a continuation of the
previous Post-Bill. Then, it is issued each time when the track is closed, the Post-Bill can be used as a
Check-Out Bill. However, Item Track System has a Check-Out Bill function so that Post-Bill is not
used as a Check-Out Bill normally.
Subtotal Bill (See Sample 2 on the next page.)
Subtotal Bill shows the temporarily closed track's contents on a receipt or on a slip if programmed to use. If the
slip printer is not programmed to use, an entire subtotal bill is always issued on a receipt.
* Subtotal Bill Format --- available when the slip printer is used
Depending on programming, a Subtotal Bill is issued by one of two methods.
i) Always entire Subtotal Bill is printed on new slip.
ii) Additional transactions are printed as a continuation of the previous Subtotal Bill.
This method is used to have a Check-Out Bill by issuing the Subtotal Bills.
* Subtotal Bill Printed on Receipt
Even if a slip printer is programmed to use, it is possible to print it on a receipt by SLIP OFF key
depression. In this case, after SLIP OFF key depression, enter the track number and press CHECKOUT BILL key.
SLIP
OFF
--- enter track # ---
CHECK
-OUT --- Subtotal Bill is issued on receipt
BILL
53
Sample 1 Post-Bill --- available immediately after the track is closed
KEY ENTRY
BUFFER PRINT 1
POST-BILL (SLIP)
<......1>
Served by
CLERK NAME 00001
SALMON STEAK
BEER
11.00
2.50
CURENT CHG
13.50
N.B
13.50
QUANTITY
2
FEB17/2002#001-000001 19:13R CLERK NAME 00001
If the "tax is calculated each time the track is closed by either NEW BAL. key or a media key" is programmed by [SF-16.g],
then BUFFER PRINT 1 key prints a post-bill with VAT data, BUFFER PRINT 2 key prints a post-bill without VAT data.
Sample 2 Subtotal Bill (not available for Amount Track System)
Depends on programming [SF-83.a,b], it is issued one of two methods.
i) Always entire Subtotal Bill is printed on new slip --- any time can be issued
KEY ENTRY
1
CHECK-OUT BILL 1
SUBTOTAL BILL (SLIP)
<......1>
Served by
CLERK NAME 00001
SALMON STEAK
BEER
SBTL
11.00
2.50
13.50
QUANTITY
2
FEB17/2002#001-000001 19:13R CLERK NAME 00001
-
If "tax calculated temporarily and printed on subtotal bill (not for post-bill)" is programmed by [SF-16.f], temporarily
calculated tax amounts are printed.
If the "tax is calculated each time the track is closed by either NEW BAL. key or a media key" is programmed by [SF16.g], then CHECK-OUT BILL 1 key prints a subtotal bill with VAT data, CHECK-OUT BILL 2 key prints a subtotal bill
without VAT data.
ii) Additional transactions are printed as a continuation of the previous Subtotal Bill
By this method, Subtotal Bill can only be issued one time for each transaction. If additional items are registered
but a Subtotal Bill need not be issued, the contents will be stored in memory.
Track # 1 is picked up and additional items are registered.
KEY ENTRY
DISPLAY
SUBTOTAL BILL (SLIP)
<......1>
1
[00001] 13.50
Served by
CLERK NAME 00001
TRACK #
SALMON STEAK
BEER
NEW BAL.
CHECK-OUT BILL
SALMON STEAK
BEER
SBTL
11.00
2.50
13.50
QUANTITY
2
FEB17/2002#001-000001 19:13R CLERK NAME 00001
<......1>
Served by
CLERK NAME 00001
SALMON STEAK
11.00
BEER
2.50
SBTL
27.00
QUANTITY
4
FEB17/2002#001-000002 19:30R CLERK NAME 00001
54
b) Picking Up a Track & Closing a Track Finally
< Picking Up a Track >
To pick up a track, enter the track number and press TRACK # key.
enter track # ---
TRACK
#
--- previous balance with track # is displayed
< Closing a Track Finally >
Enter registrations as normal and then, it can be closed finally through one of a Media (Total) keys.
open track --- register items ---
TTL
--- Track is finally closed
Check-Out Bill must be issued by the CHECK-OUT BILL key.
< Issuing a Check-Out Bill >
Depending on programming [SF-83.a,b], a Check-Out Bill is issued on a slip by one of three methods (see
Samples on the next page). However, if no Subtotal Bill has been issued, the entire Check-Out Bill is always
printed, regardless of programming.
i) Always entire Check-Out Bill is printed on new slip.
ii) If only a closing operation is done since the last Subtotal Bill issue, only the closing line is printed as a
continuation of the Subtotal Bill. If additional registrations have been done, entire Check-Out Bill is
printed on new slip.
iii) Additional registrations are always printed as a continuation of the previous Subtotal Bill.
* Check-Out Bill Keys
CHECK-OUT BILL 1: Prints a check-out bill with VAT data on slip or receipt
CHECK-OUT BILL 2: Prints a check-out bill without VAT data on slip or receipt
* Check-Out Bill Issue Cancellation
If a check-out bill issue is not necessary, it can be skipped by a key depression or by programming.
media closing ---
BILL
or "without check-out bill issue" has been programmed
CANCEL
* Check-Out Bill Printed on Receipt
Even if a slip printer is programmed to use, it is possible to print it on a receipt by SLIP OFF key
depression.
SLIP
OFF
---
CHECK
-OUT
BILL
--- Check-Out Bill is issued on receipt
55
i) Always entire Check-Out Bill is printed on new slip.
KEY ENTRY
1
TRACK #
RECEIPT
<......1>
27.00
TEA
3.00
COFFEE
2.50
CURENT CHG
5.50
CASH
32.50
QUANTITY
2
#001-000003
20:30R
CLERK NAME 00001
TEA
COFFEE
CASH
CHECK-OUT BILL (SLIP)
CHECK-OUT BILL 1
CHECK
OUT
BILL
Check-out bill header
printed by [SF-6.b]
<......1>
Served by
CLERK NAME 00001
2 X 11.00 SALMON STEAK
2 X 2.50 BEER
TEA
COFFEE
CASH
22.00
Items are consolidated by
5.00
[SF-67.h]
3.00
2.50
32.50
QUANTITY
6
FEB17/2002#001-000003 20:30R CLERK NAME 00001
ii) When a final closing operation is done since the last Subtotal Bill issue, a closing line only is printed on
the last Subtotal Bill. If additional registrations have been done, entire Check-Out Bill is printed on new
slip.
The automatic line finder advances the slip paper past the previously-printed area, and prints only the closing
lines (the check-out bill header if programmed, media amount and tax data, etc.) on the bill.
KEY ENTRY
1 TRACK #
CASH
CHECK-OUT BILL (SLIP)
<......1>
Served by
CLERK NAME 00001
2 X 11.00 SALMON STEAK
2 X 2.50 BEER
CHECK-OUT BILL 1
22.00
5.00
QUANTITY
4
FEB17/2002#001-000002 19:30R CLERK NAME 00001
CHECK OUT BILL
<......1>
Served by
CLERK NAME 00001
CASH
27.00
QUANTITY
4
FEB17/2002#001-000003 21:30R CLERK NAME 00001
If a Subtotal Bill has not been issued previously, entire Check-Out Bill is always issued.
56
iii) Additional registrations are always printed as a continuation of the previous Subtotal Bill.
KEY ENTRY
1
TRACK #
RECEIPT
<......1>
27.00
TEA
3.00
COFFEE
2.50
CURENT CHG
5.50
CASH
32.50
QUANTITY
2
#001-000003
20:30R
CLERK NAME 00001
TEA
COFFEE
CASH
CHECK-OUT BILL (SLIP)
CHECK-OUT BILL 1
<......1>
Served by
CLERK NAME 00001
SALMON STEAK
BEER
SBTL
11.00
2.50
13.50
QUANTITY
2
FEB17/2002#001-000001 19:13R CLERK NAME 00001
<......1>
Served by
CLERK NAME 00001
SALMON STEAK
11.00
BEER
2.50
SBTL
27.00
QUANTITY
4
FEB17/2002#001-000002 19:30R CLERK NAME 00001
CHECK OUT BILL
<......1>
Served by
CLERK NAME 00001
TEA
3.00
COFFEE
2.50
CASH
32.50
QUANTITY
6
FEB17/2002#001-000003 20:30R CLERK NAME 00001
If a Subtotal Bill has not been issued previously, entire Check-Out Bill is always issued.
57
c) Track Transfer to a Designated Track
Track transfer is done using NEW BAL. key and CASH/TTL 5 key if permitted by programming [SF-15.b].
Transfer can be canceled by pressing CL key at any time instead of CASH/TTL 5 key.
When the clerk track assignment system is used by [SF-16.a], only the assigned clerk can transfer his/her own
track to another track that is assigned to him/her.
track # transferred from ---
Track #10 is transferred to Track #15
KEY ENTRY
DISPLAY
000010 5.00
10 NEW BAL.
000
.15
15
NEW BAL.
010 - 01.5
CASH/TTL 5
NEW
BAL.
--- track # transferred to ---
NEW
BAL.
CONFIRMATION RECEIPT
<.....10> -> <.....15>
#001-000023
09:10R
CLERK NAME 00001
58
---
CASH
TTL 5
d) Track Balance Calculation (display only)
< Track Balance Checking >
This function is used to check a track balance on the display.
Press BALANCE CALCULATION key and enter the track number as follows:
BAL.
CAL.
KEY ENTRY
BALANCE CAL.
7 TRACK #
BALANCE CAL.
--- enter track # ---
TRACK
#
---
BAL.
CAL.
--- exit from checking mode
DISPLAY
. 0
5.00
5.00
=
enter into the balance calculation mode
the balance of track #7 is displayed
exit from the balance calculation mode
< Track Balance Additions >
Also, a track's subtotal can be displayed and another track's subtotal may be added with the total being displayed.
It is then possible to divide by the number of people. Tracks are not consolidated.
KEY ENTRY
BALANCE CAL.
DISPLAY
. 0
7 TRACK #
5.00
8 TRACK #
13.00
2 [X2]
BALANCE CAL.
=
enter the balance calculation mode
the balance of track #7 is displayed (5.00)
the balance of track #8 (8.00) is added to track #7 and the total balance amount is
displayed (13.00)
6.50
the total balance (13.00) is divided by 2 and the result (6.50) is displayed
6.50
exit from the balance calculation mode
59
B. Amount Track System [SF-15.c=1]
This system records transaction totals only. The registered items per track can not be recorded.
All functions, except Check-Out/Subtotal Bill issues, are the same as the item track system.
< Opening a New Track >
Enter a sequential track number (1 ~ 30) and press TRACK # key.
enter track # ---
TRACK
#
--- new track number is assigned
A track number may be assigned at anytime while in a transaction.
< Closing a Track Temporarily >
Enter registrations as normal and then, it can be closed temporarily through NEW BAL. key.
open track --- register items ---
NEW
BAL.
--- Amount Track is temporarily closed
Post-Bill can be issued if required by BUFFER PRINT key
< Picking Up an Amount Track >
To pick up a track, enter the track number and press TRACK # key.
enter track # ---
TRACK
#
--- previous balance with track # is displayed
< Closing an Amount Track Finally >
Enter registrations as normal and then, it can be closed finally through one of a Media (Total) keys.
open track --- register items ---
TTL
--- Amount Track is finally closed
Post-Bill can be issued if required by BUFFER PRINT key
60
Amount Track System
KEY ENTRY
DISPLAY
1
[0000001]
TRACK #
SALMON STEAK
BEER
NEW BAL.
BUFFER PRINT 1
for post-bill
1
TRACK #
CAKE
COFFEE
CASH
RECEIPT
.
--- see below *1
[00001] 13.50
BUFFER PRINT 1
for post-bill
--- see below *2
<......1>
.00
SALMON STEAK
11.00
BEER
2.50
CURENT CHG
13.50
N.B
13.50
QUANTITY
2
#001-000002
19:14R
CLERK NAME 00001
current charge printed by
[SF-15.d]
<......1>
13.50
CAKE
1.50
COFFEE
1.50
CURENT CHG
3.00
CASH
16.50
QUANTITY
2
#001-000016
20:14R
CLERK NAME 00001
< Post-Bill > --- shows the last transaction's contents
Immediately after temporarily closing a track transaction, if either BUFFER PRINT 1 or 2 key is pressed, a
post-bill is issued on a receipt in the receipt-off condition or on a slip if programmed to use.
* Automatic Line Finder
If a Post-Bill of the track has been issued previously, the automatic line finder advances the Post-Bill
past the previously-printed area, and prints only the last transaction's contents as a continuation of the
previous Post-Bill. So that the Post-Bill can be used instead of the Check-Out Bill for the item track
system which is not available for the Amount Track System.
POST-BILL (SLIP)
<......1>
Served by CLERK NAME 00001
SALMON STEAK
BEER
11.00
3.00
CURENT CHG
13.50
N.B
13.50
QUANTITY
2
FEB19/2002#001-000002 19:14R CLERK NAME 00001
<......1>
Served by CLERK NAME 00001
*1
CAKE
COFFEE
*2
1.50
1.50
CURENT CHG
3.00
CASH
16.50
QUANTITY
2
FEB19/2002#001-000016 20:14R CLERK NAME 00001
61
28. Previous Balance Plus (PB+) / Previous Balance Minus (PB-)
The PB+/PB- can be used in place of track operations when the track memory is full.
These operations are similar to track operations in that they allow for intermittent registrations however no track
numbers are used. In other words, the ECR does not retain data on individual items registered. Also, the
automatic line finder on the slip printer is inoperative, however, the manual line finder can be used.
KEY ENTRY
100 MESSAGE
PB+
BANANA CAKE
NEW BAL.
DISPLAY
RECEIPT
CUSTOMER MESSAGE key symbol #38
100#
PB.P
.00
BANANA CAKE
1.25
N.B
1.25
QUANTITY
1
#001-000024
15:42R
CLERK NAME 00001
1.00
. 0
1.25
1.25
PL
nb
BUFFER PRINT 1 --- bill is printed on the slip (see below * 1)
100 MESSAGE
125 PB+
ICE CREAM
CASH
CUSTOMER
100#
PB.P
1.25
ICE CREAM
2.00
CASH
3.25
QUANTITY
1
#001-000025
15:55R
CLERK NAME 00001
1.00
1.25
PB- key is used for a negative previous balance.
The balance must be entered before pressing PB- key.
< Manual Line Finder Operation >
Input the line number from where printing should start and press BUFFER PRINT key. The input line number
should not be more than the preprogrammed maximum number of lines on the slip. Bills which are issued by the
manual line finder operation do not have a slip logo.
10 lines are fed by the manual line finder operation.
KEY ENTRY
POST-BILL is used as CHECK-OUT BILL
10
BUFFER PRINT 1 --- *2
1
2
3
4
5
6
7
8
9
10
Served by
CLERK NAME 00001
*1
logo is printed by [SF-83.d]
CUSTOMER
100#
PB.P
.00
BANANA CAKE
1.25
N.B
1.25
QUANTITY
1
FEB19/2002#001-000024 15:42R CLERK NAME 00001
Served by
CLERK NAME 00001
CUSTOMER
100#
PB.P
1.25
ICE CREAM
2.00
CASH
1.25
QUANTITY
1
FEB19/2002#001-000025 15:55R CLERK NAME 00001
62
*2
logo is not printed
29. Ticket System
If the ECR is programmed for the ticket system [SF-1.b], all items will be ticket items. When items are
registered, tickets are issued depending on one of three ticket issue types (real-time, after closing, mixed ticket)
by [SF-3.g,h]. Then, when the transaction is closed, a post-receipt is issued by [SF-2.b].
A PLU can be programmed to either of following two types by [PF-3.f];
Ticket Item
Combined Item
1 to 7 tickets can be issued for an item independently by flag selection [PF-3.b,c,d]
items are printed on one ticket
There are following ticket issue types to be selected by [SF-3.g,h];
Real-Time Ticket
After Closing Ticket
Mixed Ticket
Multiple Ticket
ticket items are printed in real-time and one combined ticket is printed after
transaction closing
one ticket is issued containing all ticket items in real-time, then remaining number
of tickets and one combined ticket are issued after transaction closing
two kinds of combined ticket are printed
number of tickets entered by X1 key is printed
(available if real-time ticket type is used)
Ticket Print Contents
Ticket header 1
Ticket header 2
Consecutive ticket #
Ticket number per item
Track number
Table number
printed on the first combined ticket of "after closing ticket" or "mixed ticket" by
[SF-3.f]
printed on a combined ticket which is printed after closing transaction by [SF-3.f]
printed by [SF-2.a]
separate from the consecutive ticket number is printed to distinguish 2 to 7 tickets
for an item
printed in brackets < Track # > if entered
printed in * Table # * if entered
63
a) Real-Time Ticket Sample
Ticket items printed in real-time for programmed number of tickets.
Automatic track number method is used on this sample.
[5-LINE LOGO]
FEB07/2002
<......1>
SALAD
5.00
0001
#001-000001
16:10R
CLERK NAME 00001 1
REAL-TIME TICKET
< track number >
consecutive ticket number (printed by [SF-2.a])
ticket number per item
no logo printed on the 2nd ticket
FEB07/2002
<......1>
SALAD
5.00
same consecutive ticket number is printed for 1st & 2nd tickets of two-ticket item
0001
#001-000001
16:10R
CLERK NAME 00001 2
[5-LINE LOGO]
ticket number per item
For example,
1) After a customer orders at a table, the clerk enters the order into ECR.
FEB07/2002
<......1>
STEAK
10.00
2) The clerk brings the item tickets for food to the kitchen and the
combined ticket for drink to the bar.
0002
#001-000001
16:10R
CLERK NAME 00001 1
3) When the orders are prepared, the cook puts the 1st ticket in the
"completed order box" and the 2nd ticket with the dish. Then the
clerk carries them with the tickets to the customer's table. The tickets
are used for the clerk's confirmation, for internal management, etc.
FEB07/2002
<......1>
STEAK
10.00
POST-RECEIPT
[5-LINE LOGO]
0002
#001-000001
16:10R
CLERK NAME 00001 2
[5-LINE LOGO]
COMBINED TICKET
printed after closing
FEB07/2002
BAR
<......1>
BEER
2.50
WINE
3.00
ticket header 2 (printed by [SF-3.f])
FEB07/2002
<......1>
Served by
CLERK NAME 00001
BEER
2.50
WINE
3.00
SALAD
5.00
STEAK
10.00
CASH
20.50
QUANTITY
4
#001-000001
16:10R
CLERK NAME 00001
salad & steak --- two-ticket item for food
beer & wine --- combined item for drink
0003
#001-000001
16:10R
CLERK NAME 00001
Receipt consecutive #s are not printed on the tickets under clerk interrupt system.
64
b) After Closing Ticket Sample
All ticket items are printed on the first combined ticket in real-time (a), then the remaining number of tickets (b)
and original combined ticket items are printed on the second combined ticket (c).
Manual track number method is used on this sample.
[5-LINE LOGO]
FEB07/2002
KITCHEN
SALAD
5.00
STEAK
10.00
0004
#001-000002
16:15R
CLERK NAME 00001
1st COMBINED TICKET (a)
ticket header 1 (printed by [SF-3.f])
consecutive ticket number (printed by [SF-2.a])
2nd ticket of two-ticket item (b)
no logo printed
FEB07/2002
SALAD
These tickets are printed after closing.
5.00
0005
#001-000002
16:15R
CLERK NAME 00001 1
ticket number per item
POST-RECEIPT
[5-LINE LOGO]
STEAK
2nd ticket of two-ticket item (b)
FEB07/2002
Served by
CLERK NAME 00001
BEER
2.50
WINE
3.00
SALAD
5.00
STEAK
10.00
CASH
20.50
QUANTITY
4
#001-000002
16:15R
CLERK NAME 00001
2nd COMBINED TICKET (c)
salad & steak --- two-ticket item for food
beer & wine --- combined item for drink
FEB07/2002
10.00
0006
#001-000002
16:15R
CLERK NAME 00001 1
FEB07/2002
BAR
BEER
WINE
2.50
3.00
0007
#001-000002
16:15R
CLERK NAME 00001
ticket header 2 (printed by [SF-3.f])
Receipt consecutive #s are not printed on the tickets under clerk interrupt system.
For example,
1) The clerk brings the 1st combined ticket and 2nd item tickets for food to the kitchen and the 2nd combined
ticket for drinks to the bar.
2) When the orders are prepared, the cook puts the 2nd ticket with the dish and crosses the item out on the 1st
combined ticket. Then the clerk carries the dish with the ticket to the customer's table.
3) When all dishes are prepared, the 1st combined ticket goes into the "completed order box".
65
c) Mixed Ticket Sample (two kinds of combined ticket)
The number of tickets programmed for ticket item is ignored and ticket items are printed on the first combined
ticket (a). Original combined ticket items are printed on the second combined ticket (b) after a transaction
closing.
1st COMBINED TICKET (a)
[5-LINE LOGO]
FEB07/2002
KITCHEN
SALAD
5.00
STEAK
10.00
0008
#001-000003
16:16R
CLERK NAME 00001
ticket header 1 (printed by [SF-3.f])
consecutive ticket # (printed by [SF-2.a])
2nd COMBINED TICKET (b)
no logo printed
FEB07/2002
BAR
BEER
WINE
ticket header 2 (printed by [SF-3.f])
2.50
3.00
printed after closing
0009
#001-000003
16:16R
CLERK NAME 00001
Receipt consecutive #s are not printed on the tickets under clerk interrupt system.
POST-RECIEPT
[5-LINE LOGO]
FEB07/2002
Served by
CLERK NAME 00001
BEER
2.50
WINE
3.00
SALAD
5.00
STEAK
10.00
CASH
20.50
QUANTITY
4
#001-000003
16:16R
CLERK NAME 00001
salad & steak --- two-ticket item for food (Two-ticket item settings are disregarded.)
beer & wine --- combined item for drink
66
d) Multiple Ticket Sample
The multiple ticket is issued by entering the number of tickets and pressing X1 key. This function is operative
only when real-time ticket issue and ticket PLU have been selected. The number of tickets programmed will
be ignored.
OPERATION
enter number of tickets ---
X1
--- enter ticket PLU
[5-LINE LOGO]
FEB07/2002
ADMISSION
5.00
consecutive ticket # (printed by [SF-2.a])
0010
#001-000004
16:17R
CLERK NAME 00001
[5-LINE LOGO]
FEB07/2002
ADMISSION
5.00
0011
#001-000004
16:17R
CLERK NAME 00001
[5-LINE LOGO]
FEB07/2002
ADMISSION
5.00
0012
#001-000004
16:17R
CLERK NAME 00001
Receipt consecutive #s are not printed on the tickets under clerk interrupt system.
POST-RECEIPT
[5-LINE LOGO]
FEB07/2002
Served by
CLERK NAME 00001
3 X 5.00
ADMISSION
15.00
CASH
15.00
QUANTITY
3
#001-000004
16:17R
CLERK NAME 00001
67
e) Other Notes for Ticket
TICKET OFF key
If TICKET OFF key is pressed at the beginning of a transaction, the following registered ticket items will
become a normal registration for one transaction.
PLU with Link PLU
Link PLU is printed on the same ticket of the main PLU. The ticket setting for the link PLU belongs to the
main PLU.
Simple Condiment PLU
The ticket setting for the simple condiment PLU is independent of the main PLU setting. It is not printed on
the same ticket of the main PLU.
Track # in non-clerk interrupt system
Table # in clerk interrupt system
Track # or Table # should be entered at the beginning of a transaction to print it on the ticket.
Automatic Post-Receipt
1. The automatic post-receipt is issued or is not issued after ticket issue by [SF-2.b]. If RECEIPT OFF key
has been pressed, the automatic post-receipt is not issued on a receipt until BUFFER PRINT key is pressed.
However, if the "automatic slip print" has been selected and a paper has been inserted, the post-receipt is
issued automatically on a slip.
2. Also, "automatic receipt of track permitted/prohibited" can be programmed by [SF-1.a]. So if you would
like to prohibit only receipt issue after ticket issue for ticket items in a track, set [SF-1.a=1] and [SF-2.b=0].
Ticket Printed on Kitchen Printer --- this function is independent from the ticket system.
Separately from ticket printing on the receipt, if "ticket printed on KP" is programmed by [SF-3.e], tickets are
printed on KP having a header of the kitchen printer. If the ticket system is also programmed, tickets are
printed on KP and receipt. By programming you can control whether or not to print certain ticket items on
KP/receipt printer.
Notes.
- Normal KP function is not available.
- "Ticket printed on KP" function never has an automatic receipt after KP ticket issue but it always has a receipt at real-
-
time. So if you wish to prohibit a real-time receipt issue when "ticket printed on KP" function is used, set the
following flags:
[SF-1.b=1] Ticket System
[SF-3.e=1] Ticket printed on KP
[SF-2.b=1] Automatic receipt prohibited after ticket issue
[PF-5.g=1] This ticket item is printed on KP
If you wish to prohibit a real-time receipt issue for a track only when "ticket printed on KP" function is used, set [SF2.b] to 0 and set [SF-1.a] to 1.
Tickets on KP do not have ticket headers, consecutive ticket number and ticket number per item.
Paper cutting method is fixed to either partial cut or full cut by printer setting. (TP-422 only)
Simple Condiment PLU is printed in red (in slim characters when mono-ribbon is used) with main PLU while it is
printed separately from main PLU on the ticket printed on the receipt.
Link PLU is printed with a link PLU symbol with a main PLU, like on the receipt.
Multiple ticket entry by X1 key is not available.
68
30. Cash Declaration
At the end of the day, confirm the cash in drawer amount using 'cash declaration'. A cash declaration receipt
shows any discrepancies between the amount of cash that is supposed to be in the drawer and what is actually
there is issued.
repeat for another / same TTL key
X or
Z1/P
---
CASH
enter actual
-------TTL 5
amount in drawer
TTL
------
HARD
PLU 1
Even if the Cash Declaration is done at the Z1/P position, the CID amount is not reset. It will be reset by Z-08
CID report.
KEY ENTRY
CASH/TTL5
3000 CASH
H.PLU 1
DISPLAY
Cd
. 0
5
30.00
Cd
30.00
RECEIPT
CASH
TOTAL
CID
Media multiplication is available for preset tender media keys.
This sequence is printed on X/Z-08 CID report by [SF-27.b].
69
30.00
30.00
30.00
.00
actual amount in drawer
amount in CID memory
difference
VI. TRAINING
Training mode is used for teaching ECR operations without affecting the memories of normal transactions,
tracks and programming. In the training mode, reports can not be issued and ECRs can not initiate
communication with other machines. However, except during a transaction, the memory of an ECR in the
training mode can still be accessed by other ECRs in the IRC system.
Entering the training mode
The training message is displayed once and the REG lamp flashes continuously during the training. Entering the
training mode automatically signs off the currently signed-on clerk.
X
---
CLERK
CLERK
--- enter secret training code ----ID
ID
R
perform clerk sign-on to begin practice
Exiting the training mode
Exiting the training mode automatically signs off the currently signed-on clerk.
X
---
SBTL
KEY ENTRY
DISPLAY
RECEIPT
(Entering training mode)
(Clerk Sign-On)
c-01
STEAK
PL
15.00
BEER
PL
2.50
CASH
5
17.50
****** TRAINING *******
STEAK
15.00
BEER
2.50
CASH
17.50
QUANTITY
2
****** TRAINING *******
#001-000500
13:13R
CLERK NAME 00001
training message
training message
SLIP
*****
Served by
TRAINING
CLERK NAME 00001
****
15.00
2.50
17.50
QUANTITY
2
*****
TRAINING
****
FEB17/2002#001-000500 13:13R CLERK NAME 00001
training message
STEAK
BEER
CASH
training message
Notes for the training mode
-
A programmable training message is printed on the journal, receipts, validations and slips.
The consecutive number is not incremented.
The training mode has its own track memory separate from the regular track memory. The memory is
erased when exiting the training mode.
Training count, amount and training grand total (GX) are printed on the transaction reports (01 ~ 04).
Training grand total, GX, is printed after grand totals G1 and G2. GX includes the amounts of all
transactions done in the training mode, and is not resettable.
70
VII. PRINT CONTENTS
1. Journal Print Contents
Either the normal journal contents or selective journal contents can be printed by programming [SF-6.c]. Also, if
programmed by [SF-6], the messages for power-off/-on times, initial reset times and cleared figures (with *
symbols) can be printed on the journal.
Normal Journal Contents
exactly the same way as the receipt contents
are printed and logo is printed by [SF-2.g,h]
Selective Journal Contents
only the tax line and media closing lines are
printed by [SF-6.c]
2. Receipt / Slip Print Contents
Besides the transaction items, the following items are printed on the receipt and slip. However, even though the
contents are equal, the format varies for the slip.
-
5-line receipt upper logo, 5-line slip upper logo
date (English month name: mmdd/yyyy or ddmm/yyyy, Numeric month name: mm/dd/yyyy or dd/mm/yyyy) [SF-7.e,f]
message (if entered)
PLU descriptor, PLU price
PLU supplementary message (printed above a PLU descriptor)
cooking message (printed under a PLU descriptor)
PLU code (normal or double-width character by [SF-68.h])
PLU link group-A descriptor [SF-68.e]
amount due (normal or double-width character by [SF-7.d])
tax data [SF-22]
item quantity [SF-6.d]
number of people (if entered)
last line: 3-digit machine #, 6-digit consecutive receipt # (normal/double-width character [SF-7.b]), 2-digit
clerk symbol by [SF-11.a], time [SF-7.h for receipt/journal, SF-83.c for slip], control mode & clerk name
5-line receipt lower logo, 5-line slip lower logo (not available for TP-620)
3. Post-Receipt
When the ECR is in the receipt-off condition and the ECR is not programmed for use with a slip printer, the last
transaction's data can be printed by pressing BUFFER PRINT key after closing the transaction. If the ECR is
programmed for use with a slip printer, the post-receipt is printed on the slip.
Addition to Post-Receipt, Second Receipt is printed by BUFFER PRINT key if permitted by programming [SF1.d] and when the ECR is not programmed for use with a slip printer.
PROGRAMMED AS
RECEIPT-ON
Second Receipt permitted
1 receipt + 1 second receipt by BP key *
Second Receipt prohibited
1 receipt + no second receipt
RECEIPT-OFF
1st post-receipt by BP key
2nd post-receipt by BP key *
1 post-receipt by BP key
* Second receipt message is printed by [SF-8.g] under the date.
71
VIII. REPORTS
REPORT SEQUENCE
Set the control key to X, Z1 or Z2 position and use the report sequence below;
- 1st level for daily report
: X (read only) position or Z1 (reset) position
- 2nd level for periodic report
: X (read only) position or Z2 (reset) position
For Z report issue and report format, there are some programming restrictions. Refer to system function flags [SF-26~29]
and the clerk security function flags.
FULL REPORT
X/Z
Report #
TTL
5
X2
INDIVIDUAL REPORT
for another
X/Z
Report #
X2
TTL
5
•
Required #
PLU report: Scanner can be used for entering the required #.
Clerk report: Enter the sequential clerk number (not secret clerk code).
SEQUENTIAL REPORT
X/Z
Report #
X2
Start #
X2
End #
PLU report: Enter PLU codes for the start and end numbers.
Scanner can be used also.
72
TTL
5
TRANSACTION REPORT
Auto Full Transaction
Full Transaction (X position only)
Hourly
Grand Total 1
Cash In Drawer
EFT Terminal Data Transfer & Reset
(Z position only) See note below.
Clerk
Main Group-A
Group-A per Main Group-A
Group-A
Group-A Stock
Group-B
PLU
PLU Stock
Non-Active PLU (X position only)
Menu 1 PLU (X position only)
Menu 2 PLU (X position only)
Menu 3 PLU (X position only)
Group-A PLU
Group-B PLU
Track Total (X position only)
Track (set [SF-29.a] for Z report)
Clerk Balance
ESF Status (issued when [SF-78.a=1])
REPORT #
1st level
2nd level
(X / Z1)
(X / Z2)
1
2
X-3
X-4
5
6
--7
8
---
REPORT SEQUENCE
Full
Individual
Sequential
o
o
o
o
o
Z1-9
---
o
10
20
22
25
--30
40
--X-43
X-50
X-52
X-54
56
58
X-60
62
70
79
11
21
23
26
27
31
41
42
X-44
X-51
X-53
X-55
57
59
---------
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Note: Z1-9 report is not available when Celectronic terminal is used. By issuing this report, the data in the EFT terminal is
transferred to the host terminal and the data is cleared.
Set the control key to X position for all program dumps except for clerk dump.
PROGRAM DUMP
REPORT #
Full Program
Main Group-A
Group-A
Group-B
Key Layout
Function (refer to next page for individual report)
Ruler for cheque printed on slip if [SF-57.d=1]
Key & Symbol Name
Tax
PLU
Clerk (Z2 position)
Menu Layout
Hard Clerk Key
80
81
82
83
84
Full
o
o
o
o
o
85
o
86
87
88
Z2-89
90
94
o
o
o
o
o
o
73
REPORT SEQUENCE
Individual
Sequential
o
o
Required # for Individual Function Program Dump (X-85)
#
1
2
3
4
5
10
20
21
22
23
24
25
26
40
41
Report Contents
system function flag
media currency symbol
media name
foreign currency exchange rate
media function flag
preset tender key amount
number of programmed PLUs
PLU modifier value
terminal address
slip printer ID number
clerk name
% rate
discount amount
plus amount
adjustment rate
cheque-cashing/currency exchange rate
Euro currency exchange rate
PLU sales commission rate
PLU stock rate
stock unit name
arrangement key sequence
cheque printing data
74
IRC REPORTS
(Collecting Transaction Data from Slaves)
There are two kinds of IRC reports issued by the master ECR;
One is a consolidated report for all ECR's sales data and
the other is an individual report, by designating the slave ECR by using the sequence below;
Set the control key to X, Z1 or Z2 position.
- 1st level for daily report
: X (read only) position or Z1 (reset) position
- 2nd level for periodic report
: X (read only) position or Z2 (reset) position
CONSOLIDATED (ALL ECRs) REPORT
X/Z
Report #
X2
Report #
X2
TTL
5
INDIVIDUAL (PER ECR) REPORT
X/Z
Slave ECR machine #
TTL
5
SEQUENCE FOR X-8610/8611 (Single Clerk 1st/2nd) REPORTS
All ECRs
X/Z
Report #
X2
Sequential clerk
#
•
ECR
machine #
TTL
5
Per ECR
The master ECR can collect the slave ECR's sales data only when the slave ECR is in an idle condition (no other
communication, no transaction). When the slave ECR is transmitting sales data to the master, the display shows "-irc
comm-NN" and ECR locks until IRC communication stops.
The following IRC reports are printed on the master and slave ECRs respectively.
'IRC Z report printed or not printed' [SF-29.b] can be programmed also.
Consolidated X-report
Individual X-report
Consolidated
Z-report
Individual
Z-report
printed [b=0]
not printed [b=1]
printed [b=0]
not printed [b=1]
Master prints
a consolidated report
a designated slave's report
own report and a consolidated report with
IRC status
own confirmation report and a consolidated
report with IRC status
a designated slave's report with IRC status
a designated slave's report with IRC status
75
Slave prints
a confirmation report on journal only
a confirmation report on journal only
own report
a confirmation report on journal only
own report
a confirmation report on journal only
IRC REPORT
Auto Full Transaction
Hourly
Grand Total 1
Cash In Drawer
Clerk
Single Clerk (X position only)
Main Group-A
Group-A Stock
Group-B
PLU
PLU Stock
Track
Clerk Balance (X position only)
ESF Status
REPORT #
1st level
2nd level
(X / Z1)
(X / Z2)
8801
8802
8805
8806
--8807
8808
--8810
8811
X-8610
X-8611
8820
8821
--8827
8830
8831
8840
8841
--8842
8862
--X-8870
--8879
---
REPORT SEQUENCE
All ECRs
Per ECR
consolidated individual
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
*
o
*
o
*
o
Note 1
Note 1
Note 2
* The consolidated reports are not available for these reports. However, if PC communication module Tensai2000 is used
as an IRC master, you can take the individual report from all ECRs at one time.
Note 1:
Consolidated Z report: the stock of the slave ECRs are added to the master ECR's stock memory and cleared to zero.
Individual Z report: the stock of the designated slave ECR is not added to the master ECR's stock memory but it is
cleared.
Both reports do not clear the master ECR's stock memory. Issue Z-27/42 reports on the master to clear.
Note 2:
To issue ESF report 8879, "ESF function available [SF-78.a=1]" should be set on both the master and slave ECRs.
When this individual report is taken, the slave's ESF data is always transmitted to the master.
X-8879: the master prints the ESF status but the slave prints IRC status only.
Z-8879: the master and slave print the ESF status only.
76
TRANSACTION REPORT SAMPLES
AUTO FULL TRANSACTION (01, 02)
Consists of two separate reports, Group-A (25, 26) and Full Transaction (03, 04). Refer to each report for details.
Depending on programming [SF-26,27], issuing the Z-01 or Z-02 report will reset to zero any of the following data on each
report where the data appears: "Cash in Drawer", "Consecutive Receipt/Ticket Number", "X Report Count" and "Grand
Total 1".
FULL TRANSACTION (03, 04)
X-03
SALES TTL
1
F.C. MEDIA
.95
1
EURO
10
CASH
10.00
Media Amount in Sales
media count
media amount
calculated Euro amount in local currency
140.03
TOTAL
AVRG
DRAWER TTL
1
CHEQUE
150.98
12.58
17.50
1
F.C. MEDIA
10.5425*
.95
9
1
EURO
1.97719 *
10.00
5.06
10
CASH
140.03
TOTAL
167.53
<
.00 >
A
TXSL1
55.62
TXSL2
18.75
TOTAL
74.37
TAX 1
1.11
TAX 2
.75
TOTAL
1.86
V
TXSL3
17.48
TOTAL
31.36
TAX 3
.52
TOTAL
.64
1
% 1
.60
2
TRAINING
16.87
NSALE
3
PERSN
3
TRCNT
11
TIP
8.00
CID
140.03
2
N.B
12.25
1
PB.P
5.76
Net-charge
6.45
G1:00000000000000183.37
G2:00000000000000183.37
GX:00000000000000016.87
X-0007
#001-000154
19:20X
CLERK NAME 00001
average sales per person (sales amount divided by number of persons entered in
transactions)
Media Amount in Drawer
foreign currency exchange rate, calculated local currency media amount
media amount in foreign currency
Euro currency rate
temporarily calculated amount in local currency by actual amount in Euro currency
actual amount in Euro currency (Euro currency symbol is printed if [SF-65.b=0].)
rounding error (arises because of difference when calculating back and forth for a
currency exchange rate)
Symbol A for tax calculated by Add-on Tax method
taxable subtotal amount
total taxable subtotal
tax amount
total tax amount
Symbol V for tax calculated by VAT method
VAT amount is "re-calculated from the taxable subtotal at report taking" or "calculated at
registration are accumulated and printed" by [SF-30.d].
count and amount of: %, discount, plus, adjustments, P/O, R/A, void, refund, transaction
void, cheque cashing
training count, amount
no sale count
number of people
transaction count
tip amount
cash in drawer amount
new balance count, amount (printed if [SF-27.g=0])
previous balance count, amount (printed if [SF-27.g=0])
net-charge
grand total 1
grand total 2
training grand total
X-report count
M/C #, consecutive #, time & mode
clerk name
77
Media Amount in Sales
Amount sold in each media. This amount does not include no sale transactions (P/O, R/A, cheque-cashing, etc.) and results
of rounding.
Media Amount in Drawer
Actual amount in drawer. This amount includes no sale transactions (P/O, R/A, cheque-cashing, etc.) and results of
rounding. When no sale transactions are done, the amounts will be added to the memory, but the media count will not be
changed.
Differences between media amount in sales and media amount in drawer arise when payment is in one media and change is
in another or as a result of rounding. For example, a customer gives a 100.00 cheque for a 60.00 charge. Change is 40.00 in
cash. Then, media amount in sales adds 60.00 to cheque memory. Media amount in drawer adds 100.00 to cheque memory
and subtracts 40.00 from cash memory.
Foreign Currency Media Amount in Drawer
When a media has been used for a foreign currency, the media in drawer memory stores the foreign currency value. The
printed local currency amount is temporarily calculated by the memorized foreign currency value. The difference between
the actual sales amount and the calculated local currency amount arises because of the difference when calculating back and
forth for a currency exchange rate. This difference is printed under the total amount, within brackets <
>.
For example, when a sales amount of 1.00 (decimal point is disregarded on calculation) is closed by a F.C. MEDIA key
which has a preset exchange rate of 10.5425*,
* This exchange rate is calculated by "LC / FC". The calculation method "FC / LC" is also available depending on programming.
1. Foreign currency is calculated by dividing the due amount 1.00, in local currency, by the exchange rate 10.5425.
Local Currency to Foreign Currency :
LC / exchange rate = 100 / 10.5425 = 9.4854... = rounded to 9 (printed on the receipt)
At the same time, the FC amount 9 is converted to LC amount 95 (9 x 10.5425) and the difference .05 between the actual
sales 1.00 and the calculated LC amount .95 is stored in the rounding error (difference) memory and will be printed
within brackets <
> on the sales report.
2. The printed local currency amount .95 on the report is calculated from the memorized foreign currency 9.
FC x exchange rate = 9 x 10.5425 = 94.8825 = rounded to 95
Tax
Printed by [SF-26.a]. When using the VAT system, the taxable subtotal can be programmed to include or not to include tax.
When using the add-on tax system, the taxable subtotal does not include tax. If programmed, adjustment, %, plus and
discount calculations will affect each taxable subtotal.
Tip
Total amount of all clerk' tips. Tip will also be added to a media memory by [SF-29.f].
Cash in Drawer Amount
Total of the media in drawer amounts that are programmed to be added to CID.
New Balance
The amount closed by NEW BAL. key and PB+/PB- operations. Includes tax and percentage calculations if tax and
percentage are calculated on closing by NEW BAL. key. This amount does not reset to zero after the track or PB+/PBoperation is closed by a media key.
Previous Balance Plus
The count is the total number of times that a track was opened when the previous balance was either zero or positive and a
PB+ was entered. The amount is the accumulation of positive previous balances that were picked up when a track was
opened and an amount was entered by PB+ operations.
Previous Balance Minus
The count is the total number of times that a track was opened and a PB- was entered.
The amount is the accumulation of negative previous balances that were picked up when a track was opened and an amount
was entered by PB- operations.
Net Charge
Net charge shows the total amount of all non-closed transactions. It is calculated from the new balance and the previous
balances.
78
Grand Total
Grand Total 1 can be reset by issuing the Z-07 or Z-01 ([SF-27.a=1]). Grand Total 2 is the accumulated grand total. Grand
Total X is the grand total of training transactions. Neither Grand Total 2 nor Training Grand Total X can be reset. If
programmed by [SF-29], grand total is calculated by: each PLU amount, % amount, plus amount, discount amount and tax
amount.
Report Count
There are three kinds of report counts: X (read only), Z1 (1st level read/reset) and Z2 (2nd level read/reset). Each Z count
will be increased only when a Z-01/Z-02 report is issued or when any Z report is issued by [SF-26.b].
HOURLY (05, 06)
X-05
14:00
11
15:00
6
16:00
8
TOTAL
Hourly data is recorded in one of two ways by [SF-27.d].
50.55
15.20
22.25
88.00
time period
sales quantity, amount
1. Number of registrations and net amount.
Each item registered -- even if it includes multiplication -increases the count by 1. The net amount includes VAT
tax, "%, amount (+)/(-) calculations on items" but does not
include add-on tax amount, adjustment amount, "%,
amount (+)/(-) calculations on subtotal".
2. Number of transactions and gross amount.
Each time a transaction is closed by a media key, the count
is increased by 1. The gross amount includes VAT tax,
add-on tax, adjustment amount, "%, amount (+)/(-)
calculations on both items and subtotal".
GRAND TOTAL 1 (07)
Max. 14 digits of grand total can be printed. However, "0" is filled on the left side so as to cover up to 19 digits on the report.
Grand Total 1 can be reset by issuing the Z-07 or Z-01 ([SF-27.a=1]).
X-07
G1:00000000000000183.37
CASH IN DRAWER (08)
Total of the media in drawer amounts is printed if media are programmed to be added to CID memory.
X-08
CID
X-08
TTL 1
TTL 2
TTL 3
TTL 4
CASH
TOTAL
CID
140.03
Media amounts in cash declaration sequence are printed with this report by [SF-27.b].
.00
.00
.00
.00
140.00
140.00
140.03
.03
media amounts in cash declaration sequence
(even if the actual amounts per media are not entered, media amounts are printed)
CID amount
difference between actual amount in drawer and CID memory
79
CLERK (10, 11)
Contents of 1st level report (X/Z-10)
Each Clerk's Data
sequential clerk number, clerk name
transaction count, amount
AVRG: average sales per person (sales amount
divided by number of persons entered in
transactions)
S1~S4: sales commission 1 ~ 4 rate (each)
sales-type 1 ~ 4 PLU amount (each)
total amount of sales-type 1 ~ 4 PLUs
CM: total amount of commission
tip amount
counts/amounts
void
refund
transaction void
counts
no sale
clear
correction
person
media in drawer memory
media count, amount
total media amount
< rounding error >
counts/amounts
P/O
R/A
cash in drawer amount
Contents of 2nd level report (X/Z-11)
Each Clerk's Data
sequential clerk number, clerk name
transaction count, amount
AVRG: average sales per person (sales amount
divided by number of persons entered in
transactions)
CM: total amount of commission
tip amount
person count
All Clerk's Total
total transaction amount
Note: On the full report, some data with value of "0" will be
skipped. On individual reports, all data (whether "0"
valued or not) is printed.
All Clerk's Total
total transaction amount
S1~S4: total amount of each sales-type 1 ~ 4 PLU
total amount of sales-type 1~ 4 PLUs
void amount
refund amount
transaction void amount
Sales-Type 1 ~ 4 PLU Amount
All PLUs are categorized by sales-type 1 ~ 4. With a four-type clerk memory, the sales amounts of type-1 ~ 4 PLUs are
listed separately from each clerk's transaction amount.
The sales-type 1 ~ 4 PLU amounts include or do not include the discount, plus and % amount on item by [SF-29.e]. These
amounts on subtotal and adjustment amounts are always not included in the sales-type 1 ~ 4 PLU amounts. Also, when using
the VAT system, the PLU amount can be programmed to include tax or not include by [SF-27.c]. When using the add-on tax
system, the PLU amount does not include tax.
Total Amount of Commission
Commission amount is calculated by the sales-type 1 ~ 4 of each PLU by four respective commission rates. Only the total
amount will be printed on the report.
The ECR does not have 1st level memory for commission. On the 1st level report, the commission is calculated by each
sales-type when the report is issued. When the Z-report of 1st level clerk is issued, the commission is accumulated in the 2nd
level. On the 2nd level report, the commission is calculated from the temporary 1st level amount plus the 2nd level memory
amount.
Cash In Drawer Amount
The media in drawer amounts per clerk that are programmed to be added to CID.
80
MAIN GROUP-A (20, 21)
This report shows the ten main group-A's which are used to monitor sales of all drinks, all snacks, all daily
goods, etc. Each main group-A consists of linked group-A's.
X-20
17
MAIN GP-01
16.85
32.692%
:
TOTAL
119.15
main group-A quantity, descriptor
main group-A amount
sales % (printed by [SF-27.e])
total amount
Main Group-A Quantity
The quantity is calculated either by stock rate or by item quantity ([SF-68.c]).
Sales %
Each group's % of total sales is calculated either by quantity of items sold or by sales amount ([SF-27.h]). A positive sales %
is calculated from the total positive sales and a negative sales % is calculated from the total negative sales.
GROUP-A PER MAIN GROUP-A (22, 23)
This report shows the linked group-A's per main group-A.
X-22
MG 01
MAIN GP-01
17
GROUP-A-01
16.85
100
%
TOTAL
16.85
-----------------------:
ALTTL
119.15
main group-A number, descriptor
linked group-A quantity, descriptor
linked group-A amount
sales % per main group-A (printed by [SF-27.e])
total amount per main group-A
total amount of all Main Group-As
Linked Group-A Quantity
The quantity is calculated either by stock rate or by item quantity ([SF-68.c]).
GROUP-A (25, 26) / GROUP-B (30, 31)
X-25
17
GROUP-A-01
16.85
MAIN GP-01
32.692%
:
TOTAL
119.15
group quantity, descriptor
group amount
link main group-A descriptor (only for group-A)
sales % (printed by [SF-27.e])
total amount of all groups
Group-A or B Quantity
Only Group-A quantity is calculated either by stock rate or by item quantity ([SF-68.c]). Group-B quantity is always
calculated by item quantity.
Group-A or B Amount
Group-A/B amount is calculated as:
total PLU amount linked to each group-A/B
%, (+), (-) amount on item ([SF-29.e])
+) VAT tax amount
1
81
GROUP-A STOCK (27)
This report shows the total stock of PLUs which are linked to group-A. The stock is calculated either by item
quantity or calculated quantity using stock rate by [SF-68.c].
X-27
GROUP-A-01
15.5
GROUP-A-02
group-A descriptor
total stock of PLUs linked to group-A
(even if the stock is calculated by a stock rate, stock unit name is not printed)
7.5
PLU (40, 41)
X-40
P---------------1#
PLU-NAME 000000001
GROUP-A-01
16
16.00
1
.85
--------------------17
16.85
17.0 kg
:
TOTAL
119.15
X-40
P---------------1#
PLU-NAME 000000001
GROUP-A-01
1
1.00
:
PLU code
PLU descriptor
link group-A descriptor
1st price PLU quantity, amount
2nd price PLU quantity, amount
total of 1st & 2nd prices PLU quantity, amount
sales quantity calculated by stock rate (printed if PLU has a stock rate), stock unit name is
printed by [SF-6.a]
all PLUs' total amount
Only 1st price sales is printed when sales at 2nd price is 0 by [SF-8.b=1]
PLU Amount
PLU amounts include or do not include the discount, plus and % amounts on item ([SF-29.e]). Discount, plus and %
amounts on subtotal and adjustment amounts are never included in the PLU amounts.
Sales Quantity Calculated by Stock Rate
This quantity is calculated by each PLU's stock rate ([SF-68.c]). For example, if the stock rate is "0.2 (litter)" and the sold
quantity is 3, the sales quantity will be 0.6 (litter).
PLU STOCK (42)
This report shows the stocks of PLU that remain. The stock is calculated either by item quantity or calculated
quantity using stock rate ([SF-68.c]).
X-42
P---------------1#
PLU-NAME 000000001
17.0 kg
PLU code
PLU descriptor
stock (calculated by item quantity or by stock rate), stock unit name is printed by [SF-6.a]
NON-ACTIVE PLU (43, 44)
This report shows PLU items (PLU code and descriptor) that have not been sold.
MENU 1 ~ 3 PLU (50 ~ 55)
These reports show sales data for PLU assigned to each menu on the keyboard. The report contents are the same
as PLU report.
82
GROUP-A PLU (56, 57) / GROUP-B PLU (58, 59)
This report shows the consolidated PLU sales data of items which are linked to a group-A or a group-B. The
report contents are almost the same as PLU report.
X-56
GA 01
GROUP-A-01
P--------------1#
PLU-NAME 000000001
17
16.00
2
.85
--------------------17
16.85
17.0 kg
100
%
TOTAL
16.85
-----------------------:
ALTTL
119.15
Each group descriptor
PLU code (linked to group-A or B)
PLU descriptor
1st price PLU quantity, amount
2nd price PLU quantity, amount
total of 1st & 2nd prices PLU quantity, amount
sales quantity calculated by stock rate ([SF-68.c])
sales % per group (printed by [SF-27.f])
total amount per group
all group's total amount
TRACK TOTAL (60)
Shows the total balance amount of all tracks that have been closed by NEW BAL. key. When tracks are closed
by a media key, the data is updated by subtracting the track amounts from the total.
TRACK (62)
Shows each track amount that has been closed by NEW BAL. key.
X-62
<
5>
CLERK NAME 00001
5.00
<
6>
CLERK NAME 00001
7.00
TOTAL
12.00
< track number >
assigned clerk name
balance due
total balance due of all tracks
CLERK BALANCE (70)
Shows each clerk balance that has been stored under the clerk interrupt system.
X-70
<01> *----*
CLERK NAME 00001
5.00
<02> *----*
CLERK NAME 00002
7.00
< clerk sequential number >, * table number *
clerk name
balance due in the clerk memory
ESF (79)
Each journal data is memorized in the ECR's ESF (Electronic Store & Forward) memory when [SF-78.a] is set to
1. This report shows the ESF status.
X-79
USED :
REST :
ALLOT:
5
5691
5696
number of used records
number of remaining records
total number of records
83
IX. WARNING MESSAGES
The messages are displayed showing on abbreviation followed by a warning number.
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
xx
SYSTEM ERROR
xx
UNALLOABLE OPERATION
xx
INPUT DATA ERROR
xx
LIMIT ERROR
xx
INPUT COMPULSORY
xx
COMMUICATION ERROR
xx
PAPER CONDITION
xx
CONFIRM QUESTION
System error: Require a initial reset.
Printer error: Disconnect AC cord and then back on or check the printer.
Input figure over limitation: Press CL key.
(PLU HALO can be omitted temporarily by using HALO RELEASE key.)
Clerk is not signed on.
Item/Media (slip) validation is compulsory: Print item or media validation by MISC. VALID key.
(omitted temporarily by OFF COMPULSORY key)
Total (slip) validation is compulsory: Print total validation by TTL. VALID key.
(omitted temporarily by OFF COMPULSORY key)
Validation paper has not been inserted. (displayed by [SF-10.c=1])
Validation paper has not been removed. (displayed by [SF-10.c=1])
Message input is compulsory. (omitted temporarily by OFF COMPULSORY key)
Perform foreign currency subtotal display operation: Press F.C. SBTL key and F.C. MEDIA key.
Number of persons input is compulsory. (omitted temporarily by OFF COMPULSORY key)
SBTL key depression is compulsory before tendered amount input.
(omitted temporarily by OFF COMPULSORY key)
Tax table is not preset: Enter a tax amount manually. Preset tax table.
Tendered amount input is compulsory. (omitted temporarily by OFF COMPULSORY key)
Drawer is open: This message is displayed only when the 'drawer open sensor' is being used.
Cash declaration is compulsory. (omitted temporarily by OFF COMPULSORY key)
Registration buffer is almost full: Prepare to close the transaction.
PLU stock is zero or negative (displayed by [SF-17.h=1]): Enter stock by programming.
(omitted temporarily by HALO RELEASE key)
Journal paper near end (displayed by [SF-2.e=1]): Replace with new paper roll.
(only at the beginning of transaction, it can be released temporarily by using OFF COMPULSORY key)
ECR to ECR RAM data transfer error: Check the cable connection between ECR & ECR. Refer to the
INTERFACES & PERIPHERALS MANUAL for details.
NOT USED
printer is busy: Press CL key and wait for the printer to be available. Press 'PRINT' on the printer to
21 Slip
proceed with the slip.
22 Short tendering amount input of TTL 5 prohibited
23 Receipt paper end: While the paper is replaced, only RPF key can be pressed. Press X2 key to start printing.
24~27 NOT USED
28 Simple condiment PLU entry prohibited: Main PLU not entered yet.
29 Simple condiment PLU input compulsory. (omitted temporarily by OFF COMPULSORY key)
30 PLU not found: Enter correct PLU code or program the PLU code.
84
31
32
33
34
Check-out bill issue compulsory: Press CHECK-OUT BILL key. (canceled by using BILL CANCEL key)
Slip paper has not been inserted.
Current track/clerk interrupt memory is full: Close the track or the clerk's transaction temporarily by NEW
BAL. key or close it by a media key.
NOT USED
35
36
37
38
39
40
41
42
43
44
45
46
47
New balance closing is compulsory. (omitted temporarily by OFF COMPULSORY key)
New balance closing is prohibited.
Track # input is compulsory. (omitted temporarily by OFF COMPULSORY key)
Table # input is compulsory. (omitted temporarily by OFF COMPULSORY key)
Cooking message input is compulsory. (omitted temporarily by OFF COMPULSORY key)
Track transfer is prohibited.
Track # is not correct.
Slip print is compulsory. (omitted temporarily by OFF COMPULSORY key)
Clerk ID error: The clerk was not assigned to the track in registration. Enter correct clerk code or use the
correct clerk key.
Subtotal bill issue is compulsory. (omitted by BILL CANCEL key)
Are you sure to execute transaction void?
Clerk's transaction is stored.
(displayed when Z report or program sequence is performed in the middle of transaction)
NOT USED
48 PLU code check digit error: Enter correct PLU code.
49 PLU code price check digit error of in-store marking code: Enter correct PLU code.
50~52 NOT USED
53 This PLU is not programmed as a master PLU for Not Found PLU entry
54 Not Found PLU has not been entered
55~62 NOT USED
for Euro conversion not completed. ([SF-54.e=1], PGM-397, PGM-101)
63 Preparations
Refer to the separate document "How to Switch to Euro Currency System 2002" (Euro2002-5402.doc).
64
65
66
Entered numbers for Euro conversion sequence is not correct.
Refer to the separate document "How to Switch to Euro Currency System 2002" (Euro2002-5402.doc).
Scanner communication error
NOT USED
67
68
69
70
71
72
73
74
75
Channel C communication error
Channel D communication error
Buffer for journal data transfer is full.
IRC line (RS485) is busy.
Kitchen printer 1 error:
Confirm the setting of the printers.
Kitchen printer 2 error:
Confirm the setting of the printers.
Kitchen printer 3 error:
Confirm the setting of the printers.
Kitchen printer 4 error:
Confirm the setting of the printers.
Slip printer TP-620 error:
Confirm the setting of the TP-620.
Refer to the INTERFACES & PERIPHERALS MANUAL for details.
Refer to the INTERFACES & PERIPHERALS MANUAL for details.
Refer to the INTERFACES & PERIPHERALS MANUAL for details.
Refer to the INTERFACES & PERIPHERALS MANUAL for details.
Refer to the INTERFACES & PERIPHERALS MANUAL for details.
85
76~79 NOT USED
80 ESF memory is full.
81 ECR is in communication with EFT terminal.
82 EFT terminal communication error: Press CL key.
83 Card data aborted by EFT terminal or ECR.
84 Enter voucher number printed on a receipt of EFT terminal.
85 EFT terminal is out of order.
86 Communication time out
99
It indicates that ECR data might be collapsed because of a low battery condition by battery discharge while ECR
is in stock for a long period.
Perform Physical RAM Test and Auto Preset, then leave ECR ON for minimum of 3 hours for battery charge.
MISCELLANEOUS MESSAGES
"Initial Reset" operation accepted
In PC batch communication
PC batch communication error
Transferring RAM data to peripheral (RAM data transfer)
Receiving RAM data from peripheral (RAM data transfer)
ADDITIONAL INDICATION FOR ESF
When the ESF memory is near full (5001 records out of 5696), the 2nd and 3rd MENU lamps will flash.
The ESF memory near full condition can be cleared by issuing the Z-79 report with data print by [SF-78.c], by taking Z-8879
by PC (from Tensai2000), or by taking Z-79 report by PC batch communication.
If the ESF memory becomes full, the data first stored, i.e. data at the beginning of the ESF memory area, will be deleted from
the ESF memory and the 2nd and 3rd MENU will flash continuously (only when [SF-78.b=0] is selected).
86
IRC MESSAGES
Following messages are displayed on the master ECR or the slave ECRs in the IRC communication. Even when the ECR is
in the OFF position, these messages are displayed.
Displayed on Slave ECR
Displayed when a slave ECR is in IRC communication.
Block number NN shows the received/sent data from/to the master.
Displayed on Master ECR
Displayed when master ECR is in IRC communication of report collection (X, Z) or program (P)
download. xxxx shows report number or program number. ### shows a slave ECR number.
Displayed when a slave ECR is in another IRC communication, or when the communication line
is being used by another ECR for slip printer transmission, etc.
Displayed when a slave ### is in a busy condition while the master sends a program data.
Displayed when the power is 'off' on a slave ###, or when the communication line is used for a
PC communication, or the cable being disconnected while the master sends a program data.
Displayed when a slave ### is processing a transaction, or when a transaction is closed but
some compulsory conditions still remain.
Displayed when a slave ### is error (cannot communicate), or when the power is 'off' or the
cable being disconnected.
POWER OFF (AC CORD DISCONNECTED) / BUSY / COMMUNICATION ERROR AT SLAVE ECR
For an X-report data, the master ECR prints consolidated X report skipping power off or busy slave ECR. See
the IRC status which is printed at the end of the report for non-consolidated slave ECRs.
When collecting a Z-report data and one or more of the slave ECRs are not ready, the master ECR displays the
slave ECR status as shown above (IRC busy, E1, E2). Re-attempt to collect the slave's report or skip it.
TTL 5 key
for re-attempt
CL key for skip
In order to include an ECR's data on the Z-report, close the transaction in process in that particular
slave, or turn its power on and then press TTL 5 key on the master ECR.
If you do not wish an ECR's data on the report, press the CL key and the master will skip that slave
ECR. Master resumes data collection for the next ECR in the system.
POWER OFF (AC CORD DISCONNECTED) AT MASTER ECR
If the power fails when collecting X-report data, the master prints consolidated X report when the power returns.
See the IRC status which is printed at the end of the report for non-consolidated slave ECRs.
If the power fails when collecting Z-report data, the master ECR displays the machine number of the slave ECR
when the power returns. Press CL key to skip or press TTL 5 key to re-attempt.
87
Download PDF