Acer | LCD Monitor 51cm(20") TFT Color | User guide | Acer LCD Monitor 51cm(20") TFT Color User guide

Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
1
To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this
range may result in permanent damage.
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
2
3
4
5
6
Package contents
LCD
monitor
User
guide
Quick
start
guide
VGA
cable
AC
Adapter
AC
Power
cord
HDMI
cable
(Optional)
Audio
cable
(Optional)
DVI cable
(Optional)
MHL
cable
(Optional)
Adjusting the monitor base
1
Carefully remove the monitor from its packaging.
• The monitor base is attached onto the monitor before shipment and it is undetachable.
Pull the monitor base out fully so that the monitor can be placed on a stable surface in the upright position.
Secure the monitor base by turning the white screws (at the bottom of the base) using the integrated tab or a suitable coin.
2
3
Connecting your monitor to a computer
1
2
Turn off your computer and unplug your computer’s power cord.
Connect the signal cable to the VGA and/or DVI-D (optional) and/or
HDMI input socket of the monitor, and the VGA and/or DVI-D (optional)
and/or HDMI output socket of the graphics card on the computer.
or connect MHL cable(Only for MHL-Input Model)(Optional) to the
portable device.Then tighten the thumbscrews on the signal cable
connector.
Connect one end of the adapter to the monitor and the other end to a
properly grounded, AC outlet.
Plug the power cords of your computer and your monitor into a nearby
electrical outlet.
Connect the audio cable.
Connect an audio cable to the audio port of the monitor.
3
4
5
Note: MHL input only works for the MHL-certified device. Please chek
user manual for more instruction.
HDMI 1
VGA
HDMI
HDMI
Item
Description
1
Power button/
indicator
Turns the monitor on/off. Blue indicates power
on. Orange indicates standby/power saving
mode.
2
< / > button
Press the < / > button to navigate to the desired
function or to change the settings of the current
function.
3
Menu/Enter
button
Press to view the OSD menu. Press it again to
enter a selection in the OSD menu.
4
Auto/Exit button
• When the OSD menu is active, press this
button to exit the OSD menu.
• When the OSD menu is inactive, press
this button to activate the Auto Adjustment
function.
5
Empowering
Key
Press this button to open the Acer eColor
Management OSD and access the scenario modes.
VGA IN
AUDIO IN
DC
VGA
AUDIO
HDMI 1
HDMI 2
VGA IN
AUDIO IN
DC IN
(MHL)
(MHL)
VGA IN
AUDIO IN
DC IN
HDMI 1
HDMI 2
5 4 3
2
1
DC IN
VGA
HDMI
Panel controls
No.
HDMI 2
English
Please read the following instructions carefully.
Regulations and safety notices
English
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can
be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant
provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS Directive 2011/65/EU and Directive
2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC
regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to
this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the
Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003. Remarque a I’intention des utilisateurs canadiens Cet
appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of
with your other household waste. Instead, it is your responsibility to dispose of your waste equipment
by handing it over it a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information abut where you can drop off your waste equipment
for recycling, please contact your local city office, your household waste disposal service or the shop
where you purchased the product.
SPECIFICATIONS
LCD Panel
S236HL
Driving system
TFT Color LCD
Size
23”W (58cm)
Pixel pitch
0.2652(H) x 0.2652(V)mm
Brightness (cd/m2 )
200 / 250 (Min/Typ)
Contrast
100,000,000:1 Max (ACM)
Viewable angle
178°(H),178°(V)
Response time
6ms (G to G)
Panel Type
IPS
Video
mini LVDS
H-Frequency
30kHz-80kHz
V-Frequency
55Hz-75Hz
Display Colors
16.7 Million
Dot Clock
148.5MHz
Max. Resolution
1920 x 1080
Plug & Play
Power consumption
(at 250 nits)
English
Items
VESA DDCCI
On Mode
27W(typical)
Sleep Mode
0.49W(typical)
Off Mode
0.45W(typical)
1.5Wx2(Only Audio-Input model) (Optional)
Speakers
D-Sub
Input Connector
DVI-D 24pin (Only Dual-Input Model)
HDMI 19pin (Only HDMI/MHL-Input Model)
Analog
Digital Signal (Only Dual-Input Model)
Input Video Signal
HDMI Signal (Only HDMI-Input Model)
MHL Signal (Only MHL-Input Model)
Maximum Screen Size
Horizontal
509.184mm
Vertical
286.416mm
Power Source
100-240Vac, 50-60Hz (AC adaptor)
Environmental Considerations
Operating Temperature: 0° to 40°C
Storage Temperature: -20° to 60°C
Operating Humidity: 20% to 85%
Dimensions (W x H x D)
532.3x400.4x142.3mm
Weight (N. W.)
4.8kg(net)
Mechanism specifications
Tilt: -5° to +15°
Swivel: No
Height adjustment: No
Pivot: No
Detachable foot stand: No
Buttons
Power Button
</>
Menu/Enter
Auto/Exit
Empowering Key
Functions
Contrast
Brightness
Focus
Clock
H. Position / V. Position
Color temperature
OSD timeout
Language
Auto configuration
Wide mode (Full/Aspect)
ACM (On/Off)
DDC/CI (On/Off)
Input signal
Display information
Reset
External Controls
*All specifications are subject to change without notice.
Regulatory Compliance
English
Acer Incorporated
Declaration of Conformity
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
Contact Person: Mr. RU Jan, e-mail:ru.jan@acer.com
And,
Acer Italy s.r.l
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921 ,Fax: +39-02 9399-2913
www.acer.it
Declare under our own responsibility that the product:
Product:
LCD Monitor
Trade Name:
Acer
Model Number:
S236HL
SKU Number:
S236HL xxxxxx;
(“x” = 0~9, a ~ z, A ~ Z, or blank)
•
•
•
•
•
To which this declaration refers conforms to the relevant standard or other standardizing documents:
EN55022:2006/A1:2007 Class B; EN55024:2010
EN 61000-3-2:2006+A1:2009+A2:2009, Class D
EN61000-3-3:2008
EN60950-1:2006/A11:2009/A1:2010+A12:2011
EN50581:2012
We hereby declare above product is in compliance with the essential requirements and other relevant
provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS Directive
2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
Year to begin affixing CE marking 2013.
_______________________________
RU Jan / Sr. Manager
Regulation, Acer Inc.
March.21,2013
Date
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product:
LCD Monitor
Model Number:
S236HL
SKU Number:
S236HL xxxxxx
(“x” = 0~9, a ~ z, A ~ Z or Blank)
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
Contact Person:
Phone No.:
333 West San Carlos Street
Suite 1500
San Jose, CA 95110, U.S.A.
Acer Representative
254-298-4000
Fax No.:
254-298-4147
English
Acer America Corporation
333 West San Carlos St.,Suite 1500
San Jose,CA 95110, U. S. A.
Tel : 254-298-4000
Fax : 254-298-4147
www.acer.com
Download PDF