Miranda | Kaleido-X16 | Kaleido-X16 - Shoreview Distribution

Kaleido multi-viewers
Kaleido-X16
Super-silent, 16 input, dual output multi-viewer
The Kaleido-X16 is a compact, ultra-quiet multi-viewer with 16 inputs, two
multi-viewer outputs, and two router outputs. It offers the highest level of image
quality, and can be used with 3Gbps/HD/SD and Analog video. It’s ideal for
small control rooms, although it can also be paired with routers to create the
very largest combined multi-viewer and routing systems.
KEY FEATURES AND BENEFITS
Unmatched image quality
Advanced signal probing
›› Unmatched multi-viewer picture quality, and superior on-screen graphics, for
the most critical monitoring applications
›› Integral signal probing and on-screen alarms
›› Display of XDS Metadata and Closed Captioning
›› 2 HDMI and 2 HD/SD-SDI multi-viewer outputs
›› DXF-200 optical DVI extension uses multi-mode fiber with SC connector to
simplify long runs of up to 3300 ft (1 km) (see page 546)
Built-in router
›› Two 3Gbps/HD/SD router outputs (16 x 2)
›› Internal router control by NVISION panel and NV9000 Controller
Superior layout flexibility
›› Any of the video inputs can be displayed, any number of times, at different
resolutions and sizes up to full screen, on the multi-viewer outputs, without
blocking or bandwidth limitations
Legendary ease of use
›› Easy layout preparation with XEdit (see page 544)
›› Intuitive On-screen Mouse control
Multi-format operation
›› Choice of multi-viewer remote control panels: simple Kaleido-RCP2 and
advanced RCP-200 with router control (see page 72)
›› 3Gbps / HD / SD / Analog inputs
›› Stereoscopic 3D support (Dual Link 1.5Gbps, SMPTE-292M)
›› DVI and MPEG video accepted with optional interfaces
Ultra-quiet, robust design
›› Super silent for installation within studios and control rooms
›› Highly robust 1RU design with optional redundant power supply
Scalable for the largest systems
›› Expansion through combination with upstream router (NVISION or third party)
›› Can create the very largest combined multi-viewer/router systems with up to
1152 video inputs, 144 independent multi-viewer outputs
INCREASING VIDEO INPUTS
AND MULTI-VIEWER OUTPUTS
Kaleido-X16 (1RU)
Kaleido-X16 + NVISION router
›› 16 video inputs
›› Up to 1152 video inputs
›› 2 multi-viewer outputs
›› Up to 144 multi-viewer outputs
Kaleido-X16 is ideal for small control rooms but can be combined with routers to create the very largest combined routing and multi-viewer system with
up to 1152 video inputs and 144 multi-viewer outputs.
www.miranda.com/Kaleido-X16
585
Kaleido multi-viewers
Using the compact Kaleido-X16 in smaller control rooms
The Kaleido-X16 processor is ideal for smaller monitoring facilities, such as call letter television station master control
rooms, mobile trucks and production fly cases. Despite its compact size, the multi-viewer provides all the advanced
Metadata extraction, probing, and alarming capabilities of the larger Kaleido-X multi-viewer.
Count up/down timer control
via on screen mouse or GPI
Dynamic/static
source labels
Preview/program tallies
DME
INPUT
CLOCK VTR 02
VTR 03
MAG
VTR 04
MEO
VTR 05
MLE
SER 01
PGM
SERVERSER 02
SER 03
SIM
PROMPTCG 01
CG 02
TEST
VG
VG-VIDEO A
VG-VIDEO B
EXT
Safe titles
Cat/Index GUI
Kaleido-RCP2
Community television, small studios and trucks
With native router control and a direct tally interface with production switchers, the
Kaleido-X16 is perfect for small studios and trucks. The built-in 16 x 2 router can
feed quality control instruments or redundant output paths.
586
Vchip and XDS
information
Automatic aspect
ratio control with
support of AFD/WSS
TV-PG
Dolby E Metadata and
loudness monitoring
Display of
source format
Kaleido multi-viewers
Closed Captioning /
Teletext display
Time of day
Expected: -27 dB
Dialnorm: -26 dB
Loudness: -32 dB
The English coutryside offers many historical
sites with breathtaking views and scenery
Count down timers slaved
from automation system
Kaleido-RCP2
Small call letter TV station master control room
The Kaleido-X16 provides all the signal validation tools required, with extraction of
the important Metadata. The processor’s two router outputs can be used to feed the
master control switcher.
High quality monitoring
Extraction of Time Code
from video signal
Clocks sync with
Time Code or NTP
Auto-sensing inputs
00:12:45;23
The severe snow
storm
00:12:45;23
Kaleido-RCP2
Production fly case
The Kaleido-X16’s compact, standalone design, quiet ventilation
and easy set-up makes it ideal for fly case applications.
www.miranda.com/Kaleido-X16
587
Kaleido multi-viewers
Kaleido-X16: unmatched picture quality & display elements
Picture quality
The Kaleido-X16 system offers unmatched picture quality, using Miranda´s Polyphase scaling
technology. Windows can be resized all the way from very small windows up to full screen
display, without the loss of definition that is commonly associated with multi-viewers. This high
performance, combined with superior on-screen graphics, makes Kaleido-X16 ideal for the most
critical monitoring applications.
Audio meters
Kaleido-X16 can display four group, multi-channel audio for multi-lingual and 5.1 applications.
Audio level meters are extracted from analog, AES or embedded signals, and can be positioned
inside the video window in transparency or outside. Ballistics and scales are configurable, and
a phase correlation meter can be displayed with each pair. Dolby E audio can be extracted from
an embedded audio signal for on-screen metering. An audio meter can readjust itself based on
inserted Program Configuration Metadata.
Automatic aspect ratio control and safe areas
Aspect ratio and safe area markers can be positioned over video windows to simplify multiformat monitoring. Free form safe area markers, based on a user’s bitmap, can be overlaid on
top of each video window. This feature is useful to protect graphical content or branding that
will be applied downstream after production.
The processor can automatically change a signal’s aspect ratio between 16:9 and 4:3, based
on the Active Format Description (AFD), Wide Screen Signaling (WSS) or source resolution.
Image formatting rules are followed during conversion, including letter/pillar boxing and resizing/
cropping.
Dynamically updated UMDs
Text labels (UMDs) can be displayed inside or outside windows, and updated by a UMD
controller. Dynamic text can be driven by NVISION and many third-party routers, and by some
automation vendors. Kaleido-X16 also offers a serial interface for leading production switchers,
which provides tally updates as well as sources and destination labels. Text fonts are flexible
and support UNICODE for multi-lingual texts.
Clocks and timers
Multiple analog and digital clocks/timers (with date) can be displayed with programmable offsets
and configurable colors. The clocks/timers can be driven by LTC, referenced internally, or to an
NTP server. Each output module features three independent LTC inputs.
588
5.1
Kaleido multi-viewers
Picture-in picture and display customization
Picture-in-picture displays can be generated for easy comparisons between playout and return
feed signals or for the playout server’s backup confidence monitoring.
Bitmap images can be displayed to customize the display background with channel logos and
other graphics.
Signal validity monitoring
The following parameters can be detected and presented on-screen, or reported to SNMP-based
signal and facility monitoring systems, including Miranda’s iControl systems:
Video probing
Audio probing
Metadata monitoring
›› video black
›› audio silence
›› video frozen
›› audio overload
›› XDS data including Vchip
rating
›› video level too high
›› audio mono
›› loss of video
›› audio out of phase
›› EAV/SAV error
›› Closed Captioning and
Teletext (608, 708 and WST
42 & 47) is presented in the
format seen by television
viewers in their homes
TV-PG-SV
Probing points can be configured with different thresholds, and a specific probing zone within
the video can be configured for the freeze and black detection.
Loudness / Dolby E monitoring
In addition to displaying the Dialnorm value encoded in the video signal, Kaleido-X16 processors
can also measure the perceived Loudness of the audio signal and compare it to the encoded
value. The system can alert operators when signals exceed thresholds, by comparing the
Dialnorm and measured Loudness against a target values. The Loudness is measured using
LEQ-A or ITU-R-BS-1770.
Loudness out of range
Expected: -27 dB
Dialnorm: -26 dB
Loudness: -32 dB
Display of Closed Captioning, Subtitles and XDS data
Closed Captioning and Subtitles are presented in the format seen by television viewers in their
homes. XDS data, including Vchip information, can also be overlaid in each video window, along
with the Dolby E Metadata, AFD/WSS formats, and audio/video signal format.
00:11:43
TV-PG
Brian Johnson’s favorite hobby is riding his 450cc dirtbike
through the backwoods of his Red River, Texas, ranch.
Audio format:
Video format:
AFD: www.miranda.com/Kaleido-X16
PCM
1080i 50
16_9_2
589
Kaleido multi-viewers
Superior display flexibility with Kaleido-X16
Kaleido-X16 offers superior signal flexibility due to the system’s high bandwidth performance. This allows an operator to
focus on the ideal monitoring configuration, without worrying about the multi-viewer’s limitations.
Any source
HD-SDI
1080i 50 / 60
3 Gbps with 3D support
SDI
525 / 625
DVI
MPEG
Analog
NTSC / PAL / SECAM
Auto-sensing inputs allow multiple source formats to be combined. DVI and MPEG are input via external options.
Any resolution
1920 x 1200
1920 x 1200
768 x 1366
1080 x 1920
1920 x 1200
1920 x 1200
Projection cubes
Simultaneously display across monitors of different resolutions up to 1920 x 1200, and display across flat panels and projection cubes.
Any size
Signals can be displayed at any size up to full screen at full HD resolution.
590
Kaleido multi-viewers
Any repetition
CAM 2
Sources can be repeated across multiple displays.
Any position
Signals can be positioned anywhere across displays.
Any span
Signals can span across two displays.
Any PIP
Sources can be repeated (picture in picture) across displays.
Any format
4:3 + 16:9
Landscape
Portrait
Signals of different aspect ratios can be displayed alongside each other, and the displays
can be either landscape or portrait.
www.miranda.com/Kaleido-X16
591
Kaleido multi-viewers
Kaleido-X16: overview of functionality
INPUTS
HEAD 1
HDMI OUT
1
2
DVI IN
SDI OUT
3
4
5
6
7
8
9
10
11
LTC IN
1
2
SDTI
RT OUT
GPI I/O
12
OPTION
13
ETHERNET
AUDIO I/O
14
15
USB
16
RS-422
1
1
REF
HEAD 2
2
DVI IN
SDI OUT
HDMI OUT
2
Kaleido-X16 rear panel
outputs
CONTROL
RCP-200 advanced
multi-viewer /
router control panel
Kaleido-RCP2 multi-viewer
remote panel
1
2
2
High Resolution
HDMI Outputs
High Resolution
3Gbps/HD/SD Outputs
2
2
with audio monitoring
3Gbps/HD/SD Router Outputs
drive full resolution 3Gbps/HD/SD
signals into video monitors or
test equipment
2
LTC 2
3Gbps/HD/SD
Router Outputs
2
Multi-viewer Outputs
RS-422 USB Nvision
Router Control Panel
1
(Option)
Ethernet 2 DVI Bkg Input Keyboard and mouse
XEdit layout editor software
16 Auto-sensing Inputs per frame
16
36
Video Inputs
(3Gbps/HD/SD/Composite)
Embedded Audio Extraction
32 GPI Input/
4 Outputs
HD-SDI
Audio Bridge Terminal
up to 128 ch. per frame
128
Densité Series IRD-3802
compressed video
(MPEG) to HD-SDI
KXI-DVI-Bridge
Dual channel DVI
inputs with loop out
Analog/AES
Discrete Audio Inputs
INPUTS
592
Multi-format
Reference
Input
Kaleido-X16 offers seamless integration with the NVISION router family,
and third party routers, to allow expansion up to 1152 video inputs and
144 multi-viewer outputs.
Miranda’s ‘Cluster Concept’ enables multiple multi-viewers to behave like
a single system from an operator’s perspective, with full layout flexibility.
In the example below, two NVISION 8576 routers are integrated with
72 Kaleido-X16 processors. Each multi-viewer provides two multi-viewer
displays, creating a total of 144 independent multi-viewer outputs, and
a small multi-viewer failure block (just two displays out of 144). The
entire system is fully integrated to offer seamless control of the source
assignments via on-screen mouse operation or by a router control panel.
144 independent multi-viewer displays
2
2
2
multi-viewer
outputs
multi-viewer
outputs
multi-viewer
outputs
16
16
16
video
inputs
video
inputs
video
inputs
Up to 72 Kaleido-X16
multi-viewers
1152 3 Gbps/HD/SD
video inputs from routers
Two NVISION 8576 routers
(up to 1152 video inputs to routers)
www.miranda.com/Kaleido-X16
593
Kaleido multi-viewers
Router integration: large multi-viewer, small failure block
Kaleido multi-viewers
Kaleido-X16: sophisticated alarm displays
The Kaleido-X16 offers very sophisticated alarm display elements, which are activated when video/audio, Metadata or SNMP
alarms are detected. Informative text and graphics alert operators at the monitor wall, with color coded on-screen alarm
status indicators. These status indicators can be configured to latch the status, in case of sudden faults that cannot be
intercepted by the operators. Acknowledgement mechanisms are available, with interaction by on-screen mouse.
Status message
Current status
Configurable
blinking status
Latched status
The virtual alarm configuration tool allows
grouping of alarm statuses to create a single
‘virtual’ alarm. It also offers alarm severity
configuration and logical operations like AND,
OR, and XOR between alarms.
Status from Kaleido
Status from iControl
LAN / WAN
GSM service
GSM service
iControl
Facility monitoring and control system
Kaleido-X16 alarms can be shared with Miranda’s iControl system for fully integrated facility monitoring (see page 635)
594
Kaleido-X16 offers exceptional audio performance, with the ability to
monitor up to 384 channels of audio per frame (256 embedded audio
channels plus 128 discrete audio channels), including embedded, discrete
AES, or discrete analog.
The amount of cabling needed for discrete (non embedded) audio is
minimized by the Audio Bridge Terminals, which accept analog (balanced
or unbalanced) and digital audio (75 ohm or 110 ohm). The Audio Bridge
Terminals can fit in the back of racks, and can be located up to 800 feet
(250 m) away from a Kaleido-X16 frame, with connection over standard
video coax. With this configuration, it is no longer necessary to route
individual audio signals to the multi-image processor/router.
Audio Bridge Terminals offer two coaxial outputs which provide redundancy
and allow audio inputs to be shared among multiple frames. Power for
the Audio Bridge Terminals originates from external supply or from the
Ethernet switch using Power over Ethernet (PoE).
Kaleido multi-viewers
384 audio channels per frame
http://www.miranda.com/Kaleido-X16
Elegant Audio Bridge Terminals offer highly space efficient monitoring of up to 128 discrete audio channels per frame.
Dolby E Metatada can be extracted from an embedded audio signal to feed 5.1 audio level meters. Audio meter assignment is slaved from the Dolby E
Program Configuration, and this allows precise monitoring of Dolby E audio without additional hardware.
www.miranda.com/Kaleido-X16
595
Kaleido multi-viewers
KALEIDO-X16 (1RU) TECHNICAL SPECIFICATIONS
I NPUTS (16)
COMPOSITE
Signal:NTSC (SMPTE 170M), PAL, PAL-N,
PAL-M, SECAM
>25 dB up to 5.75 MHz
Return loss:
8 bits
Quantization:
75 ohm
Impedance:
D-SDI
S
Signal:
Formats:
Audio:
Return loss:
Jitter:
Cable length:
4:2:2 SMPTE 259M-C (270 Mbps)
525 and 625
SMPTE 274M-1994
>15 dB up to 270 MHz
<0.2 UI
250 m (820 ft) (Belden 1694A)
D-SDI
H
4:2:2 SMPTE 292M-C (1.5 Gbps)
Signal:
Formats:720p29.97 Hz, 720p25 Hz, 720p24 Hz,
720p59.94 Hz, 720p50 Hz, 1080i59.94
Hz / 29.97 Hz(PSF), 1080p29.97
Hz, 1080i50 Hz / 25 Hz(PSF),
1080p25 Hz, 1080p23.98 Hz / 24 Hz,
1080p23.98(PSF) / 24(PSF), 1080i50
Hz
SMPTE 299M
Audio:
>15 dB up to 1.485 GHz
Return loss:
<0.2 UI
Jitter:
Cable length: 100 m (328 ft) (Belden 1694A)
Gbps-SDI
3
Signal: SMPTE 424M-2006 (2.97, 2.97/1.001
Gbps) Level A & B
1920x1080p60
Formats :
1920x1080p59.94
1920x1080p50
Audio:
SMPTE 299M
>10 dB up to 2.97 GHz
Return loss:
Jitter (wideband): <0.3 UI
Cable length:
100 m (328 ft) (Belden 1694)
VI INPUTS
D
Device:
KXI-DVI-Bridge
Signal:
DVI-D
Resolutions:MODE A: 1024x768, 1366x768,
1280x1024, 1680x1050, 1600x1200 @
60 Hz
MODE B: 1280x720 and 1920x1080 @
50/60 Hz
Cable length:
100 m (328 ft) (Belden 1694A)
VI BACKGROUND INPUTS (2)
D
Description:Each DVI background input is dedicated
to one HDMI output
DVI-D
Signal (2):
Resolutions:No scaling available, must match the
DVI output resolution
596
OSAIC OUTPUTS (video and graphic)
M
HDMI (2)
HDMI
Signal:
Resolutions:Variable/autosensing from 800x600 to
1920x1200 NI
37 kHz to 96 kHz
H frequency:
50/59.94 Hz
Refresh rate:
Processing delay:1 frame total when signals and frame
are genlocked
Scaling
performance:High quality adaptive filtering process
providing best performance scaling at
every image size
Connector:
HDMI
D-SDI (2)
H
Signal:3Gbps/HD/SD SDI SMPTE 424M and
292M compliant
Supports data rates of 1483.5, 1485,
2967, 2970 Mbps
>15 dB up to 1.5 GHz
Return loss:
>10 dB from 1.5 GHz to 3 GHz
Jitter (wideband): HD: <0.2 UI
3Gbps: <0.3 UI
HD-SDI ROUTER OUTPUTS
Card:
KXS-X16-RTR-16x2
4:2:2 SMPTE 292M-C (3 Gbps)
Signals (2):
Formats:525, 625, 720p59.94 Hz, 1080p23.98
Hz, 1080p23.98SF, 1080p24 Hz,
1080p24SF, 1080p25SF, 1080p29.97,
1080i50 Hz, 1080i59.94 Hz, 1080p50
Hz, 1080p59.94 Hz
Switching:Vertical interval with reference input,
selectable field
Reclocking:Configurable with or without by output
port
Processing delay: Negligible
<0.2 UI p-p (wideband)
Jitter:
BNC
Connectors:
REFERENCE INPUT
Supported formats:SMPTE 170M, SMPTE 318M, ITU 624-4,
BUT 470-6, PAL and NTSC composite
sync, SMPTE 274M, SMPTE 296M,
SMPTE 240M
NALOG AUDIO
A
Inputs:
Signals (64 or 128
mono channels):
Maximum level:
Connectors:
ES 110 OHM
A
Audio inputs:
Signals
(32 or 64 AES):
Termination:
Sampling:
Connectors:
ABT-64A or ABT-128A
20 kohm balanced, 10 kohm unbalanced
+24 dBu
WECO
ABT-64D-110 and ABT-128D-110
AES3
110 ohm balanced
48 kHz
WECO
A ES 75 OHM
Audio inputs:
Signals
(32 or 64 AES):
Termination:
Connectors:
ABT-64D-75 and ABT-128D-75
AES31D
75 ohm unbalanced
BNC
ANALOG AUDIO MONITORING OUTPUTS
Signals (2):
Balanced analog stereo
Impedance:
<600 ohm
Level:
+24 dBu maximum
Via HD-26 connector
Connector:
A ES AUDIO MONITORING OUTPUTS
Signals (2):
AES3
Impedance:
<110 ohm
Connector:
Via HD-26 connector
L TC INPUTS
Signal (2):SMPTE 12M-1995 (EBU-3259-E),
SMPTE 309M
501 p-p to 10 Vp-p
Level:
>10 kohm
Impedance:
50/59.94 Hz
Refresh rate:
BNC
Connectors: PI INPUTS
G
Signals (32):
Contact closure
Opto-isolated, active low with internal
pull-ups to 5VDC and up to 12VDC
PI OUTPUTS
G
Signals (4):Contact closure Open collector 5 to 12
VDC
K ALEIDO-X16 FRAME
Power supply:Hot-swappable redundant power
supplies
100-240 V
Input voltage:
50/60 Hz
Frequency:
Power:
300 W
Dimensions:H: 44 mm / 1.75 inches (1RU)W: 448
mm / 17.6 inchesD: 641 mm / 25.5
inches
Full spec
temperature range:0-40 °C (ambient)
Weight:
23 lbs (10.44 kg)
F rame selection
KALEIDO-X16-D
KALEIDO-X16-S
16 input dual head multi-image processor
16 input single head multi-image processor
I nput options
KXI-DVI-BRIDGE
Dual channel DVI to HD bridge
3 Gbps format license (1/frame)
KXS-X16-3Gbps
KXS-X16-AUD-DLXPremium audio option, including HD/SD DE-EMB, Dolby
and Loudness
KXS-X16-SD-EMB
SD-SDI embedded audio license (1/frame)
KXS-X16-HD-EMB
HD/SD-SDI embedded audio license (1/frame)
KXS-X16-DOLBY
Dolby metadata extraction license (1frame)
Loudness level measurement license (1/frame)
KXS-X16-LOUDNESS
KXS-X16-CSX
CC/subtitling and XDS data license (1/frame)
udio input modules
A
ABT-128A
128 channel analog audio bridge terminal
128 channel 110 ohms AES audio bridge terminal
ABT-128D-110
ABT-128D-75
128 channel 75 AES audio bridge terminal
ABT-64A
64 channel analog audio bridge terminal
64 channel 110 ohms AES audio bridge terminal
ABT-64D-110
ABT-64D-75
64 channel 75 ohms AES audio bridge terminal
NSH26MTerminal block adaptor for HD-26 connections (for
audio I/O connections)
utput options
O
KXS-X16-HDM-D
HD-SDI monitoring output for Kaleido-X16-D
HD-SDI monitoring output for Kaleido-X16-S
KXS-X16-HDM-S
Rotation license for Kaleido-X16-D
KXS-X16-ROTATOR-D
Rotation license for Kaleido-X16-S
KXS-X16-ROTATOR-S
Dual router output option (1/frame)
KXS-X16-RTR16X2
KXS-X16-3DLA-DStereoscopic display license (line alternate mode) for
Kaleido-X16-D
KXS-X16-3DLA-SStereoscopic display license (line alternate mode) for
Kaleido-X16-S
Optical extension system w/HDMI+L - HDMI+L cable
DXF-200-B
DXF-200 power supply (1x sub-module)
DXF-200-PSU
HDMI to DVI fem cable (1ft)
KXC-HDMI-DVI
HDMI w/lock to DVI fem cable (1ft)
KXC-HDMI-L-DVI
www.miranda.com/Kaleido-X16
ontrol options C
KALEIDO-RCP2
Ethernet remote control panel and KM Gateway
KRCP-RK2
Kaleido-RCP2 rack mount bracket
KXA-TBA-44Terminal block adaptor for HD-44 connections (for GPI
connections)
Note: For router control with physical control panel, make a selection within the range of
Miranda/NVision control panel series. One of the NV-9000 or NV-915 is required to interface
the panel and the router.
T hird party interface options
KXS-X16-CTRL/UMD-NVISION3
KXS-X16-CTRL/UMD-DATATEK
KXS-X16-CTRL/UMD-ENCORE
KXS-X16-CTRL/UMB-EVERTZ
KXS-X16-CTRL/UMD-GVG7000
KXS-X16-CTRL/UMD-JUPITER
KXS-X16-CTRL/UMD-HARRIS
KXS-X16-CTRL/UMD-NETWORK
KXS-X16-CTRL/UMD-SNELL
KXS-X16-CTRL/UMD-PESA
KXS-X16-CTRL/UMD-UTAH
Control and UMD support for NVision routers
Control and UMD support for Datatek routers
Control and UMD support for Encore controller
Control and UMD support for Evertz routers
Control and UMD support for GVG7000 routers
Control and UMD support for Jupiter routers
Control and UMD support for Leitch routers
Control and UMD support for Nevion routers
Control and UMD support for Probel routers
Control and UMD support for PESA routers
Control and UMD support for Utah routers
KXS-X16-TALLY-KAHUNA
KXS-X16-TALLY-KALYPSO
KXS-X16-TALLY-KAYAK
KXS-X16-TALLY-SONY
KXS-X16-TALLY-SYNERGY
KXS-X16-TALLY-ZODIAC
Tally Interface for Snell and Wilcox Kahuna switcher
Tally Interface for Thomson Kalypso switcher
Tally Interface for Thomson Kayak switcher
Tally Interface for Sony Switchers (serial protocol)
Tally Interface for Ross Synergy amd Vision switchers
Tally Interface for Thomson Zodiac switcher
pares
S
KXA-X16-PSU
PSU-POE
Kaleido-X16 redundant power supply module
Replacement power over ethernet module
597
Kaleido multi-viewers
KALEIDO-X16 (1RU) ORDERING INFORMATION
Download PDF