WFM | 2000-S | Datasheet | WFM 2000-S Datasheet

Mixed Signal Oscilloscopes
MSO2000B Series, DPO2000B Series Datasheet
USB 2.0 Host Port on the Front Panel for Quick and Easy Data Storage
USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or
Direct Printing to a PictBridge®-compatible Printer
Optional 10/100 Ethernet Port for Network Connection and Video Out
Port to Export the Oscilloscope Display to a Monitor or Projector
Optional Serial Triggering and Analysis
Automated Serial Triggering, Decode, and Search Options for I2C, SPI,
CAN, LIN, and RS-232/422/485/UART
Mixed Signal Design and Analysis (MSO Series)
Features & Benefits
Key Performance Specifications
200, 100, 70 MHz Bandwidth Models
2 and 4 Analog Channel Models
16 Digital Channels (MSO Series)
1 GS/s Sample Rate on All Channels
1 Megapoint Record Length on All Channels
5,000 wfm/s Maximum Waveform Capture Rate
Suite of Advanced Triggers
Ease of Use Features
Wave Inspector® Controls Provide Easy Navigation and Automated
Search of Waveform Data
FilterVu™ Variable Low-pass Filter Allows for Removal of Unwanted
Signal Noise while still Capturing High-frequency Events
29 Automated Measurements, and FFT Analysis for Simplified
Waveform Analysis
TekVPI® Probe Interface Supports Active, Differential, and Current
Probes for Automatic Scaling and Units
7 in. (180 mm) Widescreen TFT-LCD Color Display
Small Footprint and Lightweight – Only 5.3 in. (134 mm) deep and 7 lb.
14 oz. (3.6 kg)
Five-year warranty
Automated Triggering, Decode, and Search on Parallel Buses
Multichannel Setup and Hold Triggering
Feature-rich Tools for Debugging Mixed
Signal Designs
Offering up to 200 MHz bandwidth and 1 GS/s sample rate, the
MSO/DPO2000B Mixed Signal Oscilloscope Series delivers advanced
debug features at an entry-level price. With up to 20 channels for analyzing
analog and digital signals, you can quickly find and diagnose problems
in complex designs. To capture long windows of signal activity while
maintaining fine timing resolution, the MSO/DPO2000B offers a deep record
length of 1 Mpoints standard on all channels.
With Wave Inspector® controls for rapid waveform navigation and
automated serial and parallel bus analysis, the MSO/DPO2000B
Oscilloscope Series from Tektronix provides the feature-rich tools you need
to simplify and speed debug of your complex design.
Discover – A waveform capture rate of 5,000 wfm/s maximizes the probability of capturing
elusive glitches and other infrequent events.
Comprehensive Features Speed Every Stage
of Debug
The MSO/DPO2000B Series offers a robust set of features to speed every
stage of debugging your design – from quickly discovering an anomaly and
capturing it, to searching your waveform record for the event and analyzing
its characteristics and your device’s behavior.
To debug a design problem, first you must know it exists. Every
design engineer spends time looking for problems in their design, a
time-consuming and frustrating task without the right debug tools.
The MSO/DPO2000B Series offers complete visualization of signals,
providing fast insight into the real operation of your device. A waveform
capture rate of 5,000 waveforms per second enables you to see glitches
and other infrequent transients quickly, revealing the true nature of device
faults. A digital phosphor display with intensity grading shows the history
of a signal’s activity by intensifying areas of the signal that occur more
frequently, providing a visual display of just how often anomalies occur.
Capture – Triggering on a specific transmit data packet going across an RS-232 bus. A
complete set of triggers, including triggers for specific serial packet content, ensures you
quickly capture your event of interest.
Discovering a device fault is only the first step. Next, you must capture the
event of interest to identify root cause.
The MSO/DPO2000B Series provides a complete set of triggers – including
runt, logic, pulse width/glitch, setup/hold violation, serial packet, and parallel
data – to help quickly find your event. With up to a 1 Mpoint record length,
you can capture many events of interest, even thousands of serial packets,
in a single acquisition for further analysis while maintaining high resolution
to zoom in on fine signal details.
From triggering on specific packet content to automatic decode in
multiple data formats, the MSO/DPO2000B Series provides integrated
support for a broad range of serial buses – I2C, SPI, CAN, LIN, and
RS-232/422/485/UART. The ability to decode up to two serial and/or parallel
buses simultaneously means you gain insight into system-level problems
To further help troubleshoot system-level interactions in complex embedded
systems, the MSO2000B Series offers 16 digital channels in addition to
its analog channels. Since the digital channels are fully integrated into
the oscilloscope, you can trigger across all input channels, automatically
time-correlating all analog, digital, and serial signals.
Mixed Signal Oscilloscopes — MSO2000B Series, DPO2000B Series
Search – I2C decode showing results from a Wave Inspector search for Address value
50. Wave Inspector controls provide unprecedented efficiency in viewing and navigating
waveform data.
Finding your event of interest in a long waveform record can be time
consuming without the right search tools. With today’s record lengths
pushing to a million data points, locating your event can mean scrolling
through thousands of screens of signal activity.
The MSO/DPO2000B Series offers the industry’s most comprehensive
search and waveform navigation with its innovative Wave Inspector®
controls. These controls speed panning and zooming through your record.
With a unique force-feedback system, you can move from one end of your
record to the other in just seconds. User marks allow you to mark any
location that you may want to reference later for further investigation. Or,
automatically search your record for criteria you define. Wave Inspector
will instantly search your entire record, including analog, digital, and serial
bus data. Along the way it will automatically mark every occurrence of your
defined event so you can quickly move between events.
Analyze – FFT analysis of a pulsed signal. A comprehensive set of integrated analysis
tools speeds verification of your design’s performance.
Verifying that your prototype’s performance matches simulations and meets
the project’s design goals requires analyzing its behavior. Tasks can range
from simple checks of rise times and pulse widths to sophisticated power
loss analysis and investigation of noise sources.
The MSO/DPO2000B Series offers a comprehensive set of integrated
analysis tools including waveform- and screen-based cursors, 29
automated measurements, and FFT analysis. Specialized application
support for serial bus analysis is also available.
Wave Inspector controls provide unprecedented efficiency in viewing, navigating, and
analyzing waveform data. Zip through your 1 Mpoint record by turning the outer pan
control (1). Get from the beginning to end in seconds. See something of interest and want
to see more details? Just turn the inner zoom control (2).
Search step 1: You define what you would like to find.
Wave Inspector® Navigation and Search
A 1 Mpoint record length represents thousands of screens of information.
The MSO/DPO2000B Series enables you to find your event in seconds with
Wave Inspector, the industry’s best tool for navigation and search.
Wave Inspector offers the following innovative controls:
A dedicated, two-tier front-panel control provides intuitive control of both
zooming and panning. The inner control adjusts the zoom factor (or zoom
scale); turning it clockwise activates zoom and goes to progressively higher
zoom factors, while turning it counterclockwise results in lower zoom factors
and eventually turning zoom off. No longer do you need to navigate through
multiple menus to adjust your zoom view. The outer control pans the zoom
box across the waveform to quickly get to the portion of waveform you are
interested in. The outer control also utilizes force-feedback to determine
how fast to pan on the waveform. The farther you turn the outer control, the
faster the zoom box moves. Pan direction is changed by simply turning the
control the other way.
A dedicated Play/Pause front-panel button scrolls the waveform across the
display automatically while you look for anomalies or an event of interest.
Playback speed and direction are controlled using the intuitive pan control.
Once again, turning the control further makes the waveform scroll faster and
changing direction is as simple as turning the control the other way.
Search step 2: Wave Inspector automatically searches through the record and marks each
event with a hollow white triangle. You can then use the Previous and Next buttons to
jump from one event to the next.
User Marks
Press the Set Mark front-panel button to place one or more marks on
the waveform. Navigating between marks is as simple as pressing the
Previous (←) and Next (→) buttons on the front panel.
Search Marks
The Search button allows you to automatically search through your long
acquisition looking for user-defined events. All occurrences of the event
are highlighted with search marks and are easily navigated to, using the
front-panel Previous (←) and Next (→) buttons. Search types include
edge, pulse width/glitch, runt, logic, setup and hold, rise/fall time parallel
bus, and I2C, SPI, CAN, LIN, and RS-232/422/485/UART packet content.
Mixed Signal Oscilloscopes — MSO2000B Series, DPO2000B Series
Digital phosphor technology enables a 5,000 wfm/s waveform capture rate and real-time
intensity grading on the MSO/DPO2000B Series.
With the color-coded digital waveform display, groups are created by simply placing digital
channels together on the screen, allowing the digital channels to be moved as a group.
You can set threshold values for each pod of eight channels, enabling support for up to
two different logic families.
that over time occur more often or, in the case of infrequent anomalies,
occur less often.
With the MSO/DPO2000B Series, you can choose infinite persistence
or variable persistence, determining how long the previous waveform
acquisitions stay on-screen. This allows you to determine how often an
anomaly is occurring.
Mixed Signal Design and Analysis
(MSO Series)
The MSO Series provides 16 integrated digital channels enabling you to view and analyze
time-correlated analog and digital signals.
Digital Phosphor Technology
The MSO/DPO2000B Series’ digital phosphor technology provides you with
fast insight into the real operation of your device. Its waveform capture rate
of 5,000 wfm/s gives you a high probability of quickly seeing the infrequent
problems common in digital systems: runt pulses, glitches, timing issues,
and more.
Waveforms are superimposed with one another and waveform points that
occur more frequently are intensified. This quickly highlights the events
The MSO2000B Series Mixed Signal Oscilloscopes provide 16 digital
channels. These channels are tightly integrated into the oscilloscope's user
interface, simplifying operation and making it possible to solve mixed-signal
issues easily.
Color-coded Digital Waveform Display
The MSO2000B Series has redefined the way you view digital waveforms.
One common problem shared by both logic analyzers and mixed-signal
oscilloscopes is determining if data is a one or a zero when zoomed in far
enough that the digital trace stays flat all the way across the display. The
MSO2000B Series has color-coded digital traces, displaying ones in green
and zeros in blue.
White edges indicate additional information is available by acquiring at a higher sample
Output of DAC Signal – Notice how FilterVu™ clearly shows the noise-free steps of the
DAC in the foreground trace (yellow) which has removed all frequencies above 5.5 kHz.
FilterVu also captures and displays high-frequency glitches up to the full bandwidth of the
oscilloscope in the background trace (orange).
FilterVu™ Variable Low-pass Filter
Tired of being limited to a 20 MHz bandwidth filter in your oscilloscope?
Simply turn on FilterVu and adjust the variable low-pass noise filter. Unlike
other variable low-pass filters, FilterVu filters out the unwanted noise from
your signal while still capturing glitches and other signal details up to the full
bandwidth of the oscilloscope. It does this by showing two waveforms: a
waveform that can be filtered (foreground waveform) and a glitch capture
waveform (background waveform).
The P6316 MSO probe offers two eight-channel pods to simplify connecting to your
The multiple transition detection hardware of the MSO2000B Series will
show you a white edge on the display when the system detects multiple
transitions. This acts as a visual reminder that increasing the sample rate
on the next acquisition will reveal higher frequency information than your
previous settings could acquire.
The MSO2000B Series simplifies channel setup by allowing you to group
digital waveforms and enter waveform labels by using a USB keyboard.
By simply placing digital waveforms next to each other, they form a group.
Once a group is formed, you can position all the channels contained in that
group collectively. This greatly reduces the normal setup time associated
with positioning channels individually.
P6316 MSO Probe
This unique probe design offers two eight-channel pods, simplifying the
process of connecting to the device-under-test. When connecting to square
pins, the P6316 can connect directly to 8×2 square pin headers spaced
on tenth-inch centers. When more attachment flexibility is required, you
can use the included flying lead sets and grabbers to clip onto surface
mount devices or test points. The P6316 offers outstanding electrical
characteristics applying only 8 pF of capacitive loading with 101 kΩ input
The filtered waveform uses a variable low-pass filter to block out noise,
yielding a cleaner waveform to more precisely locate signal edges
and amplitude levels. The result is improved confidence in you cursor
measurements and cleaner documentation of important signal attributes.
When the noise filter is adjusted to the lowest available noise-cutoff
frequency, no more than 1% of high-frequency content that could cause the
oscilloscope to alias will pass through the filter.
The glitch capture waveform shows signal details up to the full bandwidth of
the oscilloscope. The oscilloscope captures pulses as narrow as 5 ns, using
peak-detect min/max sampling, protecting you from missing unexpected
glitches or other high-frequency events.
FilterVu is ideal for repetitive, nonrepetitive, and single-shot events.
Mixed Signal Oscilloscopes — MSO2000B Series, DPO2000B Series
Triggering on a specific data packet going across an I2C bus. The yellow waveform is
clock and the blue waveform is data. A bus waveform provides decoded packet content
including Start, Address, Read/Write, Data, and Stop.
Serial Triggering and Analysis (Optional)
On a serial bus, a single signal often includes address, control, data, and
clock information. This can make isolating events of interest difficult. The
MSO/DPO2000B Series offers a robust set of tools for debugging serial
buses with automatic trigger, decode, and search for I2C, SPI, CAN, LIN,
and RS-232/422/485/UART.
Serial Triggering
Trigger on packet content such as start of packet, specific addresses,
specific data content, unique identifiers, etc. on popular serial interfaces
such as I2C, SPI, CAN, LIN, and RS-232/422/485/UART.
Bus Display
Provides a higher-level, combined view of the individual signals (clock, data,
chip enable, etc.) that make up your bus, making it easy to identify where
packets begin and end and identifying subpacket components such as
address, data, identifier, CRC, etc.
Bus Decoding
Tired of having to visually inspect the waveform to count clocks, determine
if each bit is a 1 or a 0, combine bits into bytes, and determine the
hex value? Let the oscilloscope do it for you! Once you’ve set up
Event table showing decoded Identifier, DLC, DATA, and CRC for every CAN packet in
a long acquisition.
a bus, the MSO/DPO2000B Series will decode each packet on the
bus, and display the value in hex, binary, decimal (LIN only), or ASCII
(RS-232/422/485/UART only) in the bus waveform.
Event Table
In addition to seeing decoded packet data on the bus waveform itself, you
can view all captured packets in a tabular view much like you would see in
a software listing. Packets are time stamped and listed consecutively with
columns for each component (Address, Data, etc.).
Serial triggering is very useful for isolating the event of interest, but once
you’ve captured it and need to analyze the surrounding data, what do
you do? In the past, users had to manually scroll through the waveform
counting and converting bits and looking for what caused the event. With
the MSO/DPO2000B Series, you can have the oscilloscope automatically
search through the acquired data for user-defined criteria including serial
packet content. Each occurrence is highlighted by a search mark. Rapid
navigation between marks is as simple as pressing the Previous (←) and
Next (→) buttons on the front panel.
The MSO/DPO2000B is designed to make your work easier. The bright, widescreen
display shows a long time window. Dedicated front-panel controls simplify operation. A
USB host port on the front panel allows you to easily transfer screenshots, instrument
settings, and waveform data to a memory stick.
The MSO/DPO2000B Series’ compact form factor frees up valuable space on your bench
or desktop.
Designed to Make Your Work Easier
Bright, Widescreen Display
The MSO/DPO2000B Series features a 7 inch (180 mm) widescreen,
TFT-LCD display for seeing intricate signal details.
Dedicated Front-panel Controls
Per-channel vertical controls provide simple and intuitive operation. No
longer do you need to share one set of vertical controls across all four
A USB host port on the front panel enables easy transfer of screenshots,
instrument settings, and waveform data to a USB thumb drive. The rear
panel contains a USB device port for controlling the oscilloscope remotely
from a PC or for connecting a USB keyboard. The USB device port can also
be used to print directly to a PictBridge®-compatible printer. An optional
10/100 Ethernet port enables easy connection to networks and an optional
Video Out port allows the oscilloscope display to be exported to an external
monitor or projector.
Compact Form Factor
A compact, portable form factor allows the MSO/DPO2000B Series to be
easily moved between labs and, with a depth of just 5.3 inches (134 mm),
it saves you valuable space on your test bench.
TekVPI probe interface simplifies connecting your probes to the oscilloscope.
TekVPI® Probe Interface
The TekVPI probe interface sets the standard for ease of use in probing.
TekVPI probes feature status indicators and controls, as well as a probe
menu button right on the comp box itself. This button brings up a probe
menu on the oscilloscope display with all relevant settings and controls for
the probe. TekVPI probes can be controlled remotely through USB, GPIB,
or Ethernet, enabling more versatile solutions in ATE environments.
Mixed Signal Oscilloscopes — MSO2000B Series, DPO2000B Series
Extended Analysis
Acquiring data and measurements from the MSO/DPO2000B Series is as
simple as connecting a USB cable from the oscilloscope to your PC. Key
software applications – OpenChoice® Desktop, and Microsoft Excel and
Word toolbars – are included standard with each oscilloscope to enable fast
and easy direct communication with your Windows PC.
For simple tasks, the included OpenChoice Desktop enables fast and easy
communication between the oscilloscope and your PC through USB, GPIB,
or LAN for transferring settings, waveforms, and screen images.
OpenChoice® Desktop software enables seamless connection between the oscilloscope
and your PC.
Vertical System Analog Channels
Input Channels
Analog Bandwidth (-3 dB)*1
Calculated Rise Time
Hardware Bandwidth Limits
Input Coupling
Input Impedance
Input Sensitivity Range
Vertical Resolution
Maximum Input Voltage, 1 MΩ
DC Gain Accuracy (with offset set to 0 V)
Channel-to-Channel Isolation
(Any Two Channels at Equal Vertical Scale)
70 MHz
5 ns
70 MHz
5 ns
100 MHz
3.5 ns
100 MHz
3.5 ns
200 MHz
2.1 ns
200 MHz
2.1 ns
≥100:1 at ≤70 MHz
20 MHz
1 MΩ ±2%, 11.5 pF ±2 pF
2 mV/div to 5 V/div
8 bits
300 VRMS with peaks ≤ ±450 V
±3% for 10 mV/div to 5 V/div
±4% for 2 mV/div to 5 mV/div
≥100:1 at ≤100 MHz
100:1 at ≤200 MHz
*1 Bandwidth is 20 MHz at 2 mV/div, all models.
Offset Range
Horizontal System Analog Channels
1 MΩ
2 mV/div to 200 mV/div
>200 mV/div to 5 V/div
±1 V
±25 V
Vertical System Digital Channels
All MSO2000B Models
Input Channels
Threshold Selections
User-defined Threshold
Maximum Input Voltage
Threshold Accuracy
Maximum Input Dynamic
Minimum Voltage Swing
Input Impedance
Probe Loading
Vertical Resolution
16 Digital (D15 to D0)
Threshold per set of 8 channels
TTL, CMOS, ECL, PECL, User Defined
±20 V
±40 V
±(100 mV +3% of threshold setting)
80 Vpk-pk (threshold setting dependent)
500 mVpk-pk
101 kΩ
8 pF
1 bit
Maximum Sample Rate
(all channels)
Maximum Record Length
(all channels)
Maximum Duration of
Time Captured at Highest
Sample Rate
(all channels)
Time-base Range (s/div)
Time-base Delay Time
Deskew Range
Time-base Accuracy
1 GS/s
1 Mpoints
1 ms
4 ns to 100 s
2 ns to 100 s
-10 divisions to 5000 s
±100 ns
±25 ppm
Horizontal System Digital Channels
All MSO2000B Models
Maximum Sample Rate
(when using any of
channels D7-D0)
Maximum Sample Rate
(when using any of
channels D15-D8)
Maximum Record Length
(all channels)
Minimum Detectable
Pulse Width
1 GS/s (1 ns resolution)
500 MS/s (2 ns resolution)
1 Mpoints
5 ns
2 ns typical
Mixed Signal Oscilloscopes — MSO2000B Series, DPO2000B Series
Trigger System
Trigger Sensitivity
Main Trigger Modes
Auto, Normal, and Single
Internal DC Coupled
Trigger Coupling
DC, HF reject (attenuates >85 kHz), LF reject
(attenuates <65 kHz), noise reject (reduces
0.4 divisions from DC to 50 MHz
0.6 divisions > 50 MHz to 100 MHz
0.8 divisions > 100 MHz to 200 MHz
(Auxiliary Input)
200 mV from DC to 100 MHz, 1X attenuation
Trigger Holdoff
20 ns to 8 s
Trigger Signal
Frequency Counter
Provides a higher accuracy means of identifying
the frequency of trigger signals. Trigger Signal
Frequency counter resolution is 6 digits.
Trigger Level Range
Any Channel
±4.92 divisions from center of screen
(Auxiliary Input)
±6.25 V, 1X attenuation
±12.5 V, 10X attenuation
Trigger Modes
Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, HF reject, LF reject, and noise reject.
Pulse Width
Trigger on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time.
Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Trigger when any logical pattern of channels goes false or stays true for specified period of time. Any input can be used as a clock to look for the
pattern on a clock edge. Pattern (AND, OR, NAND, NOR) specified for all analog and digital input channels defined as High, Low, or Don’t Care.
Setup and Hold
Trigger on violations of both setup time and hold time between clock and data present on any of the input channels.
Rise/Fall Time
Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either.
Trigger on line number, all lines, odd, even, or all fields on NTSC, PAL, and SECAM video signals.
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data on I2C buses up to 3.4 Mb/s.
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses up to 10.0 Mb/s.
CAN (optional)
Trigger on Start of Frame, Frame Type (data, remote, error, overload), Identifier (standard or extended), Data, Identifier and Data, End of
Frame, Missing ACK, or Bit Stuffing Error on CAN signals up to 1 Mb/s. Data can be further specified to trigger on ≤, <, =, >, ≥, or ≠ a specific
data value. User-adjustable sample point is set to 50% by default.
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Data, Tx Parity Error, and Rx Parity Error.
LIN (optional)
Trigger on Sync, Identifier, Data, Identifier and Data, Wakeup Frame, Sleep Frame, Errors such as Sync, Parity, or Checksum Errors.
Parallel (available
on MSO models
Trigger on a parallel bus data value.
Acquisition Modes
Waveform Math
Acquire sampled values.
Add, subtract, and multiply waveforms.
Peak Detect
Captures glitches as narrow as 3.5 ns at all sweep
From 2 to 512 waveforms included in average.
Spectral magnitude. Set FFT Vertical Scale
to Linear RMS or dBV RMS, and FFT Window
to Rectangular, Hamming, Hanning, or
Scrolls waveforms right to left across the screen at
sweep speeds slower than or equal to 40 ms/div.
Waveform Measurements
Waveform and Screen.
29, of which up to four can be displayed on-screen
at any one time. Measurements include: Period,
Frequency, Delay, Rise Time, Fall Time, Positive
Duty Cycle, Negative Duty Cycle, Positive Pulse
Width, Negative Pulse Width, Burst Width, Phase,
Positive Overshoot, Negative Overshoot, Peak
to Peak, Amplitude, High, Low, Max, Min, Mean,
Cycle Mean, RMS, Cycle RMS, Positive Pulse
Count, Negative Pulse Count, Rising Edge Count,
Falling Edge Count, Area and Cycle Area.
Isolate the specific occurrence within an acquisition
to take measurements on, using either the screen,
or waveform cursors.
Enables fast and easy communication between
a Windows PC and the MSO/DPO2000B
Series. Transfer and save settings, waveforms,
measurements, and screen images. Included
Word and Excel toolbars automate the transfer
of acquisition data and screen images from
the oscilloscope into Word and Excel for quick
reporting or further analysis.
IVI Driver
Provides a standard instrument programming
interface for common applications such as
LabVIEW, LabWindows/CVI, Microsoft .NET, and
Enables control of the MSO/DPO2000B Series
over a network connection through a standard web
browser. Simply enter the IP address or network
name of the oscilloscope and a web page will be
served to the browser.
Mixed Signal Oscilloscopes — MSO2000B Series, DPO2000B Series
Display Characteristics
Physical Characteristics
Display Type
7 in. (180 mm) liquid crystal TFT color display.
Display Resolution
480 horizontal × 234 vertical pixels (WQVGA).
Waveform Styles
Vectors, Dots (In Video Trigger mode), Variable
Persistence, Infinite Persistence.
Full, Grid, Cross Hair, Frame.
YT and XY.
Maximum Waveform
Capture Rate
Up to 5,000 wfm/s.
Rackmount Configuration
Cooling Clearance
2 in. (50 mm) required on left side and rear
of instrument
Input/Output Ports
USB 2.0 High-speed
Host Port
Supports USB mass storage devices and
keyboards. One port available on front panel.
USB 2.0 High-speed
Device Port
Rear-panel connector allows for
communication/control of oscilloscope through
USBTMC or GPIB with a TEK-USB-488, and direct
printing to all PictBridge-compatible printers.
LAN Port
RJ-45 connector, supports 10/100Base-T (requires
Video Out Port
DB-15 female connector, connect to show the
oscilloscope display on an external monitor or
projector (requires DPO2CONN).
Auxiliary Input
Front-panel BNC connector. Input Impedance
1 MΩ ±2%. Max input 300 VRMS CAT II with peaks
≤ ±450 V.
Probe Compensator
Front-panel pins
Amplitude: 5 V
Frequency: 1 kHz
Kensington Style
Rear-panel security slot connects to standard
Kensington-style lock.
0 ºC to +50 ºC
-40 ºC to +71 ºC
High: 30 ºC to 50 ºC, 5% to 60% Relative Humidity
Low: 0 ºC to 30 ºC, 5% to 95% Relative Humidity
High: 30 ºC to 55 ºC, 5% to 60% Relative Humidity
Low: 0 ºC to 30 ºC, 5% to 95% Relative Humidity
3,000 meters (9,843 feet)
12,000 meters (39,370 feet)
Random Vibration
0.31 GRMS from 5 to 500 Hz, 10 minutes each axis,
3 axes, 30 minutes total
2.46 GRMS from 5 to 500 Hz, 10 minutes each axis,
3 axes, 30 minutes total
Power Source
EC Council Directive 2004/108/EC
Power Source
100 to 240 V ±10%
Power Source
45 to 65 Hz (90 to 264 V)
360 to 440 Hz (100 to 132 V)
CAN/CSA C22.2 No. 61010.1-04;
Complies with the Low Voltage Directive
2004/108/EC for Product Safety.
Power Consumption
80 W maximum
Optional TekVPI®
External Power
Supply (119-7465-xx)
Output Voltage: 12 V
Output Current: 5 A
Power Consumption: 50 W
Ordering Information
DPO2000B Models
Application Modules
70 MHz, 1 GS/s, 1M record length,
2-channel digital phosphor oscilloscope
70 MHz, 1 GS/s, 1M record length,
4-channel digital phosphor oscilloscope
100 MHz, 1 GS/s, 1M record length,
2-channel digital phosphor oscilloscope
Automotive Serial Triggering and Analysis Module.
Enables triggering on packet-level information on
CAN bus and LIN bus as well as analytical tools
such as digital views of the signal, bus views,
packet decoding, search tools, and packet decode
tables with time stamp information.
100 MHz, 1 GS/s, 1M record length,
4-channel digital phosphor oscilloscope
200 MHz, 1 GS/s, 1M record length,
2-channel digital phosphor oscilloscope
Computer Serial Triggering and Analysis Module.
Enables triggering on packet-level information on
RS-232/422/485/UART buses as well as analytical
tools such as digital views of the signal, bus views,
packet decoding, search tools, and packet decode
tables with time stamp information.
200 MHz, 1 GS/s, 1M record length,
4-channel digital phosphor oscilloscope
Embedded Serial Triggering and Analysis Module.
Enables triggering on packet-level information on
I2C and SPI buses as well as analytical tools such
as digital views of the signal, bus views, packet
decoding, search tools, and packet decode tables
with time stamp information. Only two-wire SPI
support is available on two-channel models.
MSO2000B Models
70 MHz, 1 GS/s, 1M record length,
2+16 channel mixed-signal oscilloscope
70 MHz, 1 GS/s, 1M record length,
4+16 channel mixed-signal oscilloscope
100 MHz, 1 GS/s, 1M record length,
2+16 channel mixed-signal oscilloscope
100 MHz, 1 GS/s, 1M record length,
4+16 channel mixed-signal oscilloscope
200 MHz, 1 GS/s, 1M record length,
2+16 channel mixed-signal oscilloscope
200 MHz, 1 GS/s, 1M record length,
4+16 channel mixed-signal oscilloscope
All Models Include: One 10X Passive Probe per Analog Channel (TPP0200
200 MHz probe for 100 and 200 MHz models, TPP0100 100 MHz probe for 70
MHz models), Installation and Safety Manual and Translated Front-panel Overlay,
Documentation CD (063-4472-xx), OpenChoice® Desktop Software, Calibration
certificates document measurement traceability to National Metrology Institute(s) and
ISO9001 Quality System Registration, Power Cord, and a five-year warranty. Please
specify power plug and manual version when ordering.
MSO Models also Include: One P6316 16-channel logic probe and accessory kit,
and accessory bag (016-2008-xx).
Mixed Signal Oscilloscopes — MSO2000B Series, DPO2000B Series
Instrument Options
Power Plug Options
Recommended Probes
1.5 GHz TekVPI® single-ended active probe
TDP0500*4, 6
500 MHz TekVPI 42 V differential probe
Opt. A0
North America
50 MHz TekVPI 20 Ampere AC/DC current probe
Opt. A1
Universal Euro
120 MHz TekVPI 30 Ampere AC/DC current probe
Opt. A2
United Kingdom
20 MHz TekVPI 150 Ampere AC/DC current probe
Opt. A3
50 MHz TekVPI 20 Ampere AC/DC current probe
Opt. A5
Current measurement system amplifiers
Opt. A6
Opt. A10
DC to 50 MHz, 50 Ampere current probe for use
with TCPA300
Opt. A11
Opt. A12
DC to 2 MHz, 500 Ampere current probe for use
with TCPA400
Opt. A99
No power cord
2.5 kV, 500 MHz, 100X high-voltage passive probe
±750 V, 200 MHz high-voltage differential probe
±1.5 kV, 200 MHz high-voltage differential probe
±6 kV, 100 MHz high-voltage differential probe
ADA400A*4, 5
100X, 10X, 1X, 0.1X high-gain differential amplifier
Language Options*2
Opt. L0
English (front-panel label on instrument)
Opt. L1
French (front-panel overlay)
Opt. L2
Italian (front-panel overlay)
Opt. L3
German (front-panel overlay)
Opt. L4
Spanish (front-panel overlay)
Recommended Accessories
Adds Ethernet (10/100Base-T) and Video Out Port
Service Manual (English only) (PDF-only)
(Downloadable from
Opt. L5
Japanese (front-panel overlay)
Opt. L6
Portuguese (front-panel overlay)
TekVPI to TekProbe BNC adapter
Opt. L7
Simplified Chinese (front-panel overlay)
TekVPI Deskew Pulse Generator Signal Source
Opt. L8
Traditional Chinese (front-panel overlay)
Deskew and Calibration Fixture
Opt. L9
Korean (front-panel overlay)
Digital Probe Leadset (8 channels)
Russian (front-panel overlay)
TekVPI® External Power Supply
Opt. L10
User manuals (PDF) in 11 languages are available on the CD and for download from There are no printed user manuals.
Service Options*3
Opt. D1
Calibration Data Report.
*3 Probes and accessories are not covered by the oscilloscope warranty and Service Offerings. Refer to the
datasheet of each probe and accessory model for its unique warranty and calibration terms.
GPIB-to-USB adapter
Soft Transit Case and Front Protective Cover
Front Protective Cover
Hard Transit Case (requires ACD2000)
Rackmount Kit. Does not include slide-out rails.
*4 Requires TekVPI external power adapter (119-7465-00); one per oscilloscope.
*5 Requires TPA-BNC adapter.
*6 Probes terminate into 50 Ω but oscilloscope will automatically adjust to account for 1 MΩ input.
*7 Requires 50 Ω feed through termination between the oscilloscope input and the BNC cable.
Five-year warranty covering all parts and labor, excluding probes.
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix
Standard Codes and Formats.
Contact Tektronix:
ASEAN / Australasia (65) 6356 3900
Austria 00800 2255 4835*
Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Belgium 00800 2255 4835*
Brazil +55 (11) 3759 7627
Canada 1 800 833 9200
Central East Europe and the Baltics +41 52 675 3777
Central Europe & Greece +41 52 675 3777
Denmark +45 80 88 1401
Finland +41 52 675 3777
France 00800 2255 4835*
Germany 00800 2255 4835*
Hong Kong 400 820 5835
India 000 800 650 1835
Italy 00800 2255 4835*
Japan 81 (3) 6714 3010
Luxembourg +41 52 675 3777
Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Middle East, Asia, and North Africa +41 52 675 3777
The Netherlands 00800 2255 4835*
Norway 800 16098
People’s Republic of China 400 820 5835
Poland +41 52 675 3777
Portugal 80 08 12370
Republic of Korea 001 800 8255 2835
Russia & CIS +7 (495) 7484900
South Africa +41 52 675 3777
Spain 00800 2255 4835*
Sweden 00800 2255 4835*
Switzerland 00800 2255 4835*
Taiwan 886 (2) 2722 9622
United Kingdom & Ireland 00800 2255 4835*
USA 1 800 833 9200
* European toll-free number. If not accessible, call: +41 52 675 3777
Updated 10 February 2011
For Further Information. Tektronix maintains a comprehensive, constantly expanding
collection of application notes, technical briefs and other resources to help engineers working
on the cutting edge of technology. Please visit
Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents,
issued and pending. Information in this publication supersedes that in all previously published material.
Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of
Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks
of their respective companies.
29 Aug 2012
Download PDF