Motorola | PRO Series | Installation manual | Motorola PRO Series Installation manual

ACCESSORIES AND BATTERIES
Professional Series
PRO Series Portable Radios
Motorola Original®
Accessories let you make the
most of your PRO Series portable
radio’s capabilities.
You made a sound business decision when you chose
your Motorola PRO Series Professional Two-way radio.
When you choose performance-matched Motorola
Original® accessories, you’re making another good call.
That’s because every Motorola Original® accessory
is designed, built and rigorously tested to the same
quality standards as Motorola radios. So you can be
sure that each will be ready to do its job, time after
time — helping to increase your productivity. After all,
if you take a chance on a mismatched battery, a flimsy
headset, or an ill-fitting carry case, your radio may not
perform at the moment you have to use it.
We’re pleased to bring you this collection of proven
Motorola Original® accessories for your important
business communication needs. You’ll find remote
speaker microphones for more convenient control.
Discreet earpiece systems to help ensure privacy
and aid surveillance. Carry cases for ease when on
the move. Headsets for hands-free operation.
Premium batteries to extend work time, and more.
They’re all ready to help you work smarter, harder
and with greater confidence.
1
PRO Series Professional Radios are
a practical, reliable solution for
keeping users communicating and
keeping productivity high.
PRO SERIES PROFESSIONAL RADIOS
PRO5150 Radio
Motorola PRO Series Professional Portable Radios are the right choice for users with
advanced communication needs. No matter what PRO portable you use, you’ll enjoy the
PRO7150 Radio
same exceptional quality and user-friendly functionality.
The PRO Series is composed of 4 robust portable radios tailored to meet the requirements
of almost any organization. They offer unrivaled crystal-clear audio quality even in noisy
PRO9150 Radio
surroundings, thanks to Motorola’s X-Pand™ voice technology. In addition, they have all
passed Motorola’s grueling Accelerated Life Test which simulates five years of hard
use in the field.
Table of Contents
PRO Series Portable Radios . . . . . . . . . . . . . . . . . . . . . 1
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Carry Accesories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Carry Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Battery Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Vehicular Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PRO Series Mobile Radios . . . . . . . . . . . . . . . . . . . . . 19
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Mounting and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Public Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Point-of-Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Antennas and Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
PRO Elite Series Portable Radios . . . . . . . . . . . . . . . . 28
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Carry Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Carry Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
RLN4883
Vehicular
Travel Charger.
Radios sold separately.
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2
PRO Series Portable Radios
PMMN4027
Remote Speaker
Microphone with
IP57 Rating
audio
Windporting Remote Speaker Microphones
The Windporting feature of these microphones helps
lessen background noise from high winds and other severe
weather conditions. Audio can pass through the speaker
grill even when the microphone port is blocked by water.
Now public safety professionals can be more confident
than ever of clear, understandable communication when
Mother Nature is uncooperative. The Windporting Remote
Speaker Microphones allow talking and listening without
removing the radio from the belt or case. Both have a
coiled cord, Push-to-Talk switch, swivel clip, and quick disconnect latch.
PMMN4021*
PMMN4027*
Remote Speaker Microphone
with 3.5mm Audio Jack
Remote Speaker Microphone
with IP57 Rating
Remote Speaker Microphone – RSM
This Remote Speaker Microphone is water-resistant and
allows talking and listening without removing the radio
from the belt or case. It has a coiled cord and Push-to-Talk
switch. Clothing clip on the microphone back clips securely
onto shirt or collar. Ideal for high-noise environments.
PMMN4039
HKN9055
Noise-Cancelling Remote Speaker
Microphone with 3.5mm Audio Jack
Replacement Cable for Remote
Speaker Microphone
Heavy-Duty
Remote Speaker Microphone
Ideal for firefighters, police and other public safety
professionals, this remote speaker microphone lets users
talk and listen without removing the radio from the belt,
case or charger. Designed with an exceptionally rugged
housing for harsh environmental conditions. Controls
include a Push-to-Talk (PTT) Button and Hi-Low Volume
Control. Includes coiled cord, clothing clip, and audio jack.
RMN5055*
Heavy-Duty Remote Speaker
Microphone with 3.5mm Audio Jack
*Intrinsically Safe (FM); CEPEL.
3
RMN5055
Heavy-Duty Remote Speaker Microphone
Public Safety Microphones:
Emergency professionals will appreciate the reliability of these
microphones. They’re designed to help increase coverage so users
can communicate clearly and accurately.
RMN5035
UHF Public
Safety
Microphone
Public Safety Microphones – PSM
The newly designed Public Safety Microphones feature a straight cord
assembly, 3.5mm earjack, swivel clip, quick disconnect latch, antenna
connector and receive audio high/low toggle switch.
RMN5035*
RMN5036*
RMN5075*
RMN5076*
UHF Public Safety Microphone with 30 inch Cord.
Includes 450-470 MHz antenna.
VHF Public Safety Microphone with 30 inch Cord
Includes 148-174 MHz antenna.
UHF Public Safety Microphone with 24 inch Cord
Includes 450-470 MHz antenna.
VHF Public Safety Microphone with 24 inch Cord
Includes 148-174 MHz antenna.
Accessories for Remote Speaker Microphones and
Public Safety Microphones
An earphone jack located on the microphone head allows the user to
receive audio when used with the following earpieces. Compatible
with PMMN4039, AAHMN9053, PMMN4021, RMN5035, RMN5036,
RMN5075, and RMN5076. Features 3.5mm threaded earjack.
AARLN4885*
RLN4941*
WADN4190*
Receive-Only Covered Earbud with Coiled Cord.
Receive-Only Earpiece with Translucent Tube
and Rubber Eartip
Receive-Only Flexible Earpiece
An earphone
jack
located on the
microphone
head allows the
RLN4941
Receive-Only Earpiece
user
to receive
discreet audio
MicJackets
MicJackets provide speaker microphone users with a
way to further protect the “head” of their microphone
from dust, dirt, metal particles, sweat, body oils and
other on-the-job grime. MicJackets also help make
handling and interacting with the speaker
microphone more hygienic.
RLN5009
AARLN4885
Receive-Only Covered Earbud
MicJacket – Remote Speaker
Microphone Fits PMMN4039.
*Intrinsically Safe (FM); CEPEL.
when
used with
WADN4190
Receive-Only
Flexible Earpiece
the earpieces
RLN5009
MicJacket –
Remote Speaker
Microphone
shown here.
4
PRO Series Portable Radios
audio
Surveillance Kits
Surveillance accessories allow the radio user to privately receive messages
with the earpiece. They are ideal when environments require discreet
communication.
1-WIRE SURVEILLANCE KITS
AARMN4021
AARMN4028
AARMN4029
Earpiece with
Microphone
and PTT
Combined
Receive-Only Earpiece. Beige.
Receive-Only Earpiece. Black.
2-WIRE SURVEILLANCE KITS
AARMN4022
AARMN4029
Earpiece with Microphone and PTT Combined. Beige.
Earpiece with Microphone and PTT Combined. Black.
ENMN4017
ENMN4014
Earpiece with Microphone and PTT Separate. Beige.
Earpiece with Microphone and PTT Separate. Black.
3-WIRE SURVEILLANCE KITS
Surveillance Kits with Extended-Wear Comfort Earpiece
These kits include a comfort earpiece with a rubber eartip and quick disconnect
clear comfortable acoustic tube. Users hear transmissions clearly, while the
clear tube provides a discreet appearance.
RLN5315
RLN5316
5080370E97
2-Wire, Earpiece w/Microphone and PTT Combined. Black.
2-Wire, Earpiece w/Microphone and PTT Combined. Beige.
Standard Rubber Eartips, Clear. Pack of 25.
Quick Disconnect Noise Kits
Extreme Noise Kits provide extra comfort and/or noise protection for users
wearing surveillance accessories. Lightweight, translucent tube attaches to
Motorola surveillance accessories to provide flexibility and comfort, which now
includes a new quick disconnect adapter. The Quick Disconnect Adapter allows
users, especially those in multiple shift operations, to easily remove or alternate
acoustic tubes. Clothing clip prevents accessory from being pulled from the ear
due to body movement or head rotation. For optimal performance, Extra Loud
Earphones are recommended.
RLN6230
RLN6231
RLN6232
RLN6241
5080369E39†
5080370E91†
Extreme Noise Kit. Includes 2 foam earplugs.
For high-noise environments. Noise reduction = 24dB.
Can be used with Clear Comfortable Earpieces. Black.
Extreme Noise Kit. Includes 2 foam earplugs
For high-noise environments. Noise reduction = 24dB.
Can be used with Clear Comfortable Earpieces. Beige.
Low Noise Kit - Clear Acoustic Tube Assembly
Includes 1 clear rubber eartip. For low-noise environments,
does not provide hearing protection. Black.
Low Noise Kit - Clear Acoustic Tube Assembly
Includes 1 clear rubber eartip. For low-noise environments,
does not provide hearing protection. Beige.
Extra Loud Earphone. Beige.
Extra Loud Earphone. Black.
REPLACEMENT ACCESSORIES
RLN6242
5080384F72
5080370E97
5
Quick Disconnect Acoustic Tube Replacement
Replacement Foam Plugs. For RLN6230 and RLN6231.
Noise reduction = 24dB. Pack of 50.
Replacement Standard Clear Rubber Eartips. Pack of 25.
For RLN6232 and RLN6241.
*Intrinsically Safe (FM).
†Extra loud earphone (exceeds OSHA limits).
RLN6230
Extreme
Noise Kit
RLN6241
Low Noise Kit
Completely Discreet Earpiece:
Enables private communication without visible equipment.
The receiver is hidden in the ear, where it can be worn
comfortably for long periods of time.
RLN4922
Completely
Discreet
Earpiece
Kit
Completely Discreet Earpiece
Enables users to communicate with ease, in full privacy, without visible equipment.
This miniaturized receiver is discreetly hidden in the ear, where it can be worn comfortably for long periods of time. Small as it is, it offers a full range of audio functions including
automatic squelch, automatic gain control and noise filtering. Average battery life is
approximately 100 hours and includes an end-of-life warning signal when the battery needs
to be changed. Kit includes wireless receiver, inductive neckloop, 6 spare batteries and
5 spare earguards. For use with any standard 2 or 3-Wire Motorola Surveillance Kit.
RLN4922
RLN4919
RNN4005
Completely Discreet Earpiece Kit
Replacement Earguards. 5 per pack.
Replacement 1.4 Volt Batteries. 6 per pack.
The Completely Discreet
Earpiece is easy to use. Simply
remove the earpiece from any
standard 2 or 3-Wire Motorola
Surveillance Kit and plug in the
neckloop, which is easily
hidden under clothing. Security
personnel will be able to wear
this tiny receiver comfortably
for hours at a time!
Completely Discreet
Earpiece Receiver
Flexible Ear Receiver
This receive-only earpiece contains a flexible earloop and speaker which rests external to
the ear. It plugs directly into adapter or the earjack on speaker microphones.
ENMN4013*
7580372E11
Flexible Ear Receiver
Replacement Foam Ear Cushion
Clear Comfortable Earpieces
The Clear Comfortable Earpiece forms to the inside of the ear and is perfect for low
noise environments. It’s made of easy-to-clean, chemically-inert, hypo-allergenic material.
Compatible with RLN6232 and all Noise and Surveillance Kits.
RLN4760
RLN4761
RLN4762
RLN4763
RLN4764
RLN4765
Small Custom Earpiece - Right Ear
Medium Custom Earpiece - Right Ear
Large Custom Earpiece - Right Ear
Small Custom Earpiece - Left Ear
Medium Custom Earpiece - Left Ear
Large Custom Earpiece - Left Ear
*Intrinsically Safe (FM); CEPEL.
ENMN4013
Flexible Ear Receiver
From left to right,
top to bottom:
RLN4765
RLN4762
RLN4764
RLN4761
RLN4763
RLN4760
6
PRO Series Portable Radios
BDN6677
EMS with
PTT Interface Module
audio
Ear Microphone System – EMS
This compact, lightweight unit picks up sound through bone
vibrations in the ear. The miniature earpiece leaves the
hands free and face unobscured, good for rescue and
emergency personnel that must retain the ability to help,
hear and speak directly to others, those not on the c
ommunication system. EMS may be worn with protective
masks without reduction in sound clarity. It’s ideal for
high-noise environments. PTT or Voice-Activated (VOX)
Interface Module required, sold separately.
BDN6677*
BDN6678*
BDN6641*
0180305J46
AARMN4044*
AARMN4045*
EMS with PTT Interface. Black.
For standard noise levels
(up to 95dB).
EMS with PTT Interface. Beige.
For standard noise levels (up to 95dB).
EMS with PTT Interface. Grey.
For high-noise levels (up to 105dB).
Training CD-ROM
For EMS and Temple Transducer.
Push-to-Talk Only Interface Module
Push-to-Talk or Voice-Activated Interface
Module. VOX operational only on
conventional channel.
OPTIONAL ACCESSORIES
FOR EMS
0180358B38*
0180300E83*
0180300E25
0180358B32
0180358B33
0180358B34
0180358B35
0180358B36
0180358B37
4202006A01
4285838B01
4280369E44
5080358B28
5080358B29
5080358B30
5080358B31
Remote Push-to-Talk Ring Switch
Remote Push-to-Talk Body Switch
Earguard with Adjustable Loop
Earholder. Black, small.
Secures Ear Microphone in ear.
Earholder. Black, medium.
Secures Ear Microphone in ear.
Earholder. Black, large.
Secures Ear Microphone in ear.
Earholder. Clear, small.
Secures Ear Microphone in ear.
Earholder. Clear, medium.
Secures Ear Microphone in ear.
Earholder. Clear, large.
Secures Ear Microphone in ear.
Replacement Back Cover Clip
Replacement Collar Clip
Replacement Belt Clip with Screws
Eartips. Black, medium. Pack of 10.
Eartips. Black, large. Pack of 10.
Eartips. Beige, medium. Pack of 10.
Eartips. Beige, large. Pack of 10.
7
*Intrinsically Safe (FM).
0180300E25
Earguard with
Adjustable Loop
BDN6641
EMS with
PTT Interface
Temple Transducer:
Representing a significant achievement in headset design
and functionality, it allows the user to receive audio
without covering the ear.
Temple Transducer
The receiver portion of this accessory rests on the temples and is
capable of converting the receive audio from a two-way radio into sound
vibration. Sound vibration is transmitted through the surrounding tissue
and bone directly into the inner ear. It features an In-line PTT and
noise-cancelling boom microphone. The Temple Transducer can help
enhance communication and safety by allowing external sounds, such
as machinery and equipment, warning and fire alarms, the intercom,
traffic and even casual conversations with co-workers. In high-noise
environments it allows the use of earplugs.
RMN4048*
RMN5048*
0180305J46
RMN4048
Temple Transducer
Temple Transducer
Rugged Temple Transducer
Training CD-ROM. For EMS and Temple Transducer.
CommPortTM Integrated Microphone/Receiver System
The CommPort System’s advanced, self-adjusting microphone and
miniature receiver connect to a two-way radio and make it possible to
communicate under the most adverse conditions. A variety of Push-toTalk options allow the user to customize the CommPort system.
NTN1722*
NTN1723*
NTN1724*
NTN1737*
NNTN4187*
Integrated Ear Microphone/Receiver
System with PTT on Radio Adapter.
Includes Radio adapter AAHLN9717.
Integrated Ear Microphone/Receiver
System with Palm PTT.
Includes Radio adapter AAHLN9717.
Integrated Ear Microphone/Receiver
System with Ring PTT.
Includes Radio adapter AAHLN9717.
Integrated Ear Microphone/Receiver
System with Snap-On-Side PTT.
Includes Radio adapter AAHLN9717.
Integrated Ear Microphone/Receiver
System with Body PTT.
Includes Radio adapter AAHLN9717.
COMMPORT REPLACEMENT PARTS
NKN6508
NKN6510
NKN6512
NKN6525
NTN8821
NTN8986
NTN8988
RLN5037
RMN5048
Rugged Temple
Transducer
Replacement Cable for NTN1722
Replacement Palm PTT Cable for NTN1723
Replacement Ring PTT Cable for NTN1724
Replacement Snap-on-Side PTT Cable
for NNTN4187
CommPort Maintenance Kit.
Includes 10 replacement ear tubes,
10 microphone seal strips and 2 windscreens.
Adhesive Pads. For secure attachment to ear.
Pack of 90.
Ear Straps. For secure attachment to ear.
Pack of 10.
Replacement Ear Tubes. Pack of 10.
*Intrinsically Safe (FM); CEPEL.
CommPort Integrated
Ear Microphone/
Receiver System
with Palm PTT
8
PRO Series Portable Radios
RMN4055
Headband Style
Headset
audio
Receive-Only Headsets
These headsets are the right choice for high-noise environments
where users must hear information clearly, but seldom need to
transmit. Dual-Muff headsets feature easily replaceable earseals
filled with a liquid and foam combination to provide excellent
protection from outside noise as well as comfort. For use with
PMMN4039, RMN5035, RMN5036, RMN5075, RMN5076 and
PMMN4021.
RMN4054
RMN4055
Hardhat Mount Style Headset. Mounts
easily to hardhats (not included) with slots.
Noise Reduction = 22dB.
Headband Style Headset
Noise Reduction = 24dB.
PMLN4653
D-Style Earset
D-Style Earset
The D-Style Earset is designed to ensure comfort of use while
providing an elegant, sleek appearance. This lightweight,
comfortable earset can be worn on either ear and allows for
hands free communication with excellent audio clarity through
the large speaker. Includes a flexible boom microphone and In-line
Push-to-Talk button with built-in VOX switch for ease or use.
PMLN4653
D-Style Earset with Flexible Boom
Microphone, In-Line PTT, VOX Switch
Lightweight Headsets
AARMN4017
Ultra-Light
Headset with Boom
Microphone
Lightweight headsets provide high-clarity, hands free, discreet
two-way communication, while maintaining the comfort necessary
for extended-wear in moderate noise environments.
AARMN4018*
AARMN4031*
ENMN4012*
AARMN4017*
REX4648
Single-Muff, Adjustable, Lightweight Headset
with Boom Microphone, In-Line PTT Switch
Lightweight Headset with Swivel Boom
Microphone, no In-Line PTT
Ultra-Light Headset, Behind-the-Head Style
with Flexible Boom Microphone, In-Line PTT
Ultra-Light Headset with Boom Microphone
Earbud Style Receiver
Replacement Foam Earpad and Windscreen
For AARMN4018, and AARMN4031.
Racing Headset
This heavy-duty headset can be worn with most hardhats. It’s ideal
for high-noise environments, racing teams like CART® use it in the
pits for dependable communication. Adapter required.
RMN5015
RKN4091
Racing Headset
Adapter Cable for RMN5015
NFL® Style Headsets
NFL® Style Headsets are similar to the headsets worn by Coaching
Staff in the NFL.
RMN5047
AAHLN9716
NFL® Style Single-Muff, Heavy-Duty Headset
with Swivel Boom Microphone
Adapter Cable
9
*Intrinsically Safe (FM).
RMN5047
NFL® Style
Single-Muff,
Heavy-Duty
Headset with
Swivel Boom
Microphone
Tactical Headband Style Headset:
Easily replaceable ear seals are filled with a liquid
and foam combination to provide excellent sealing
and comfort in high-noise environments.
RMN4053
Tactical
Hardhat
Mount
Headset,
hardhat not included.
Medium Weight Headsets
Medium Weight Dual-Muff headsets offer high-clarity sound with the additional hearing
protection necessary for providing consistent, clear, communication in harsh, noisy situations.
AARMN4019*
RKN4097
Medium Weight, Dual-Muff, Headset, Over-the-Head Style Headset
with In-Line PTT and Noise-Cancelling Swivel Boom Microphone.
Noise Reduction = 24dB.
Medium Weight, Dual-Muff, Headset, Over-the-Head Style Headset
with Noise-Cancelling Swivel Boom Microphone. Noise
Reduction = 24dB. VOX operational only on conventional channel.
Medium Weight, Dual-Muff, Behind-the-Head Style Headset with
Swivel Boom Microphone and In-Line PTT. Noise Reduction = 24dB.
Medium Weight, Dual-Muff, Two-way, Hardhat Mount Headset
with Noise-Cancelling Boom Microphone
In-Line PTT Adapter Cable. For RMN4051.
1580376E32
3280376E35
5080548E02
7580376E34
Replacement
Replacement
Replacement
Replacement
AARMN4032*
ENMN4016*
RMN4051
RMN4052
Tactical Headband
Style Headset
MEDIUM WEIGHT HEADSET REPLACEMENT PARTS
Cloth Covers Earseals. 1 pair.
O Ring for Windscreen
Windscreen for Boom Microphone
Foam Ear Seals. 1 pair.
Tactical Medium Weight Headsets
Ideal for two-way communication in extremely noise environments. Dual-Muff, tactical
headsets have 2 microphones on the outside of the earcups which reproduce ambient
sound back into headset. Harmful sounds are suppressed to safe levels and low sounds
are amplified up to 5 times original level, but never more than 82dB. Has on/off volume
control on earcups. Easily replaceable ear seals are filled with a liquid and foam combination to provide excellent sealing and comfort. 3-foot coiled cord assembly included. Adapter
Cable RKN4097 required. Hardhat not included.
RMN4052
RMN4053
RKN4097
Tactical Headband Style Headset. Grey, Noise Reduction = 24dB.
Tactical Hardhat Mount Headset. Grey, Noise Reduction = 22dB.
Adapter Cable with In-Line Push-to-Talk
For use with RMN4052, and RMN4053.
Heavy-Duty Headset
AARMN4020
Push-to-Talk or
Voice-Activated
Headset with
Noise-Cancelling
Boom Microphone
Includes a noise-cancelling boom microphone and can be worn with or without a hardhat.
The Push-to-Talk switch is located on the earcup. On voice-activated models, the VOX
module is contained within the headset. Requires adapter AAHLN9716, sold separately.
AARMN4020*
AAHLN9716
Push-to-Talk or Voice-Activated Headset with Noise-Cancelling Boom
Microphone. Noise Reduction = 24dB. VOX operation on
conventional channel only.
Adapter Cable
*Intrinsically Safe (FM).
10
PRO Series Portable Radios
carry accessories
Carry Cases
Carrying cases are available in sizes designed to fit your radio and battery
and permit audio to be heard clearly. Belt loop and nylon cases feature
“D” rings that allow the cases to be attached to a carrying strap. Swivel
model cases secure to a belt loop and allow the case to swing freely from
side to side. The swivel latch system also allows the radio and case to be
removed from the belt loop by simply inverting the case and lifting it up
and out of the belt loop.
PRO5x50 STANDARD MODEL
HLN9665
HLN9652
HLN9676
HLN9670
HLN9701
Leather Carry Case with Belt Loop
For use with NiCd and NiMH batteries.
Leather Carry Case with Belt Loop
For use with Li-Ion batteries.
Leather Carry Case with Swivel
For use with NiCd and NiMH batteries.
Leather Carry Case with Swivel
For use with Li-Ion batteries.
Nylon Carry Case with Belt Loop
For use with NiCd, NiMH, and Li-Ion batteries.
HLN9701
Nylon
Carry Case
with
Belt Loop
PRO7x50 KEYPAD/ALL MODELS
HLN9689
HLN9677
HLN9694
HLN9690
HLN9701
Leather DTMF Case with Belt Loop
For use with NiCd and NiMH batteries.
Leather DTMF Case with Belt Loop
For use with Li-Ion batteries.
Leather DTMF Case with Swivel
For use with NiCd and NiMH batteries.
Leather Carry Case with Swivel
For use with Li-Ion batteries.
Nylon Carry Case with Belt Loop
For NiCd, NiMH, and Li-Ion batteries.
LIMITED-KEYPAD MODELS
HLN9946
HLN9945
HLN9998
HLN9946
Hard Leather
Carry Case
with Belt
Loop
Hard Leather Carry Case with Belt Loop
For use with NiCd and NiMH batteries.
Hard Leather Carry Case with Belt Loop
For use with Li-Ion batteries.
Hard Leather Carry Case with Swivel Belt Loop
For use with NiCd and NiMH batteries.
HLN9955
Hard Leather Carry Case with Swivel Belt Loop
For use with Li-Ion batteries.
HLN9698
Leather DTMF Case with Belt Loop.
For use with NiMH and NiCd batteries.
Leather DTMF Case with Belt Loop.
For use with Li-Ion batteries.
Leather DTMF Case with Swivel.
For use with NiMH and NiCd batteries.
Leather DTMF Case with Swivel.
For use with Li-Ion batteries.
Nylon Carry Case with Belt Loop.
For NiCd, NiMH, and Li-Ion batteries.
PRO9150 STANDARD MODELS
HLN9695
HLN9700
HLN9699
HLN9701
11
HLN9694
Leather
DTMF Case
with Swivel Belt Loop
Carry Accessories:
You’d be surprised how much time can be saved when a radio is
always in the same place — made easy by this versatile selection
of Motorola Original® carry accessories.
Carry Accessories
Organized types love the convenience of Motorola Original® carrying
accessories — and no wonder. They can help assure your two-way radios
are always good to go.
HLN9844
Spring Action
2 Inch Belt Clip
NTN8039
2.5 Inch
Leather Swivel
Belt Loop
CARRYING CASE BELT LOOPS
NTN8039
NTN8040
3 Inch Leather
High-Activity
Swivel Belt Loop
2.5 Inch Leather Swivel Belt Loop
NTN8040
3 Inch Leather Swivel Belt Loop
4200865599
1.75 Inch Wide Leather Belt.
For all Models
BELT CLIPS
HLN9714
Spring Action 2.5 Inch Belt Clip
HLN9844
Spring Action 2 Inch Belt Clip
NTN5243
Adjustable, Black Nylon Carrying Strap
CARRYING STRAP
4200865599
1.75 Inch Wide Leather Belt
Attaches to D-ring on cases.
WATERPROOF BAG
HLN9985
Waterproof Bag with Large Strap
RLN4890
TDN9327
Assistive Turning Knobs
Portable Radio Hanger
For door panels up to 2.75 inches.
Portable Radio Hanger
For door panels up to 2.75 to 3.25 inches.
MISCELLANEOUS
TDN9373
NTN5243
Adjustable, Black Nylon
Carrying Strap
RLN4890
Assistive Turning
Knobs
12
PRO Series Portable Radios
carry packs
Universal Chest Pack
Motorola Original® Universal Chest Pack protects the radio
and provides the freedom from holding it during standby
communication mode. Universal Chest Pack fits most
radios.
HLN6602
1505596Z02
Universal Chest Pack with Radio
Holder, Pen Holder and Velcro
Secured Pouch.
Replacement Strap for HLN6602
HLN6602
Universal Chest
Pack with Radio
Holder, Pen
Holder and
Velcro Secured
Pouch
Break-A-Way Chest Pack
All the features of the original Universal Chest Pack plus
break-a-way tabs that allow the entire pack to be pulled off
with approximately 10 lbs. of pressure.
RLN4570
1505596Z02
Break-a-Way Chest Pack with Radio
Holder, Pen Holder and Velcro
Secured Pouch.
Replacement Strap for RLN4570
RadioPAk™
The RadioPAk is lightweight and comfortable. Worn around
the waist, it keeps radios/phones at hand. It features a
separate 6 x 8 inch zippered pouch for other on-the-job
necessities. Adjustable woven nylon belt fits both men
and women.
RLN4815
4280384F89
RadioPAk Radio/Utility Case
RadioPAk Extension Belt
For waists larger than 40 inches.
Unlike rigid holders,
the universal-fit RadioPAk
is lightweight and comfortable.
An ideal companion for two-way
radios, as well as iDEN®
portables and cellular phones.
13
RLN4815
RadioPAk
Motorola Batteries:
Motorola batteries are ruggedly designed for lasting
durability and are system tested with Motorola two-way
radios to ensure optimum performance.
IMPRESTM Batteries
HNN9008_R
NAE6483_R
PMAE4003
batteries
antennas
IMPRESTM Batteries
Flexible Whip Antennas
IMPRESTM batteries, when used with an IMPRESTM charger, provide
automatic, adaptive reconditioning, end-of-life display and other advanced
features. Data is stored in the battery and communicated to the charger via
a unique IMPRESTM communication protocol which is designed to maximize
talk-time and optimize battery cycle life – all automatically.
Flexible Whip Antennas have a one-piece finish, steel core, and spiral wound
HNN4001
HNN4002
HNN4003
NiMH, 1800 mAh, 7.2 Volt
NiMH, 1690 mAh, 7.2 Volt. Intrinsically Safe.
Li-Ion, 2000 mAh, 7.2 Volt
Motorola Original® Batteries
Motorola Original® Batteries are ruggedly designed for lasting durability and
are system tested with Motorola two-way radios to ensure optimum performance. We offer various chemistry and capacity alternatives,
allowing the user to select the ideal battery for his or her needs.
NiCd is best suited for extreme-temperature operation, and provides
the maximum number of charge/discharge cycles. Li-Ion batteries offer
extended duty cycles – providing more talk time per shift.
HNN9011_R
HNN9012_R
conductor for optimal radiation characteristics.
8504762J01
NAD6579
PMAD4023
8504762J02
NAE6483_R
NAD6502_R
NAB6064
VHF, 1/4 Wave Flexible Whip, 136-155 MHz, 5.5 Inch
VHF, Flexible Whip 148-161 MHz, 7.5 Inch
VHF, Flexible Whip, 150-161 MHz, 5.5 Inch
VHF, 1/4 Wave Flexible Whip, 155-174 MHz, 5.5 Inch
UHF, Flexible Whip, 403-520 MHz, 6 Inch
VHF, Heliflex 150-162 MHz, 6 Inch
Low Band, Heliflex 29.7-50 MHz, 12 Inch
Stubby Antennas
Stubby antennas are ideal when the radio is worn on the belt because they
are short and non-obtrusive. These rugged, helical antennas feature a capless
sheath that allows for maximum flexibility.
PMAD4012
VHF, Stubby, 136-155 MHz, 3.5 Inch
PMAD4025
VHF, Stubby, 150-161 MHz, 3.5 Inch
PREMIUM NICKEL CADMIUM - NiCd
PMAD4013
VHF, Stubby, 155-174 MHz, 3.5 Inch
NiCd, 1550 mAh, 7.5 Volt. Intrinsically Safe.
NiCd, 1300 mAh, 7.5 Volt
PMAE4002
UHF, Stubby, 403-433 MHz, 3.5 Inch
PMAE4003
UHF, Stubby, 430-470 MHz, 3.5 Inch
PREMIUM NICKEL METAL HYDRIDE
- NiMH
HNN9008_R
HNN9009_R
HNN9010_R
NiMH, 1500 mAh, 7.5 Volt
NiMH, 1900 mAh, 7.5 Volt
NiMH, 1800 mAh, 7.5 Volt. Intrinsically Safe.
HNN9013D_R
Li-Ion, 1500 mAh, 7.5 Volt
WPNN4045_R
NiMH, 1200 mAh, 7.5 Volt
NNTN5332
Disposable Clamshell Battery. Black.
Requires 12 AA Batteries, not included.
Retrofit Boards
AAHLN9725
Voice Storage Option Board - Field Install Only
AAHLN9729
DTMF Decode Option Board - Field Install Only
PREMIUM LITHIUM ION - Li-Ion
POWER NICKEL METAL HYDRIDE - NiMH
CLAMSHELL
14
PRO Series Portable Radios
chargers
AAHTN3000
Single-Unit,
Rapid-Rate
Charger
Single-Unit, Rapid-Rate, Universal Chargers
Single-Unit Chargers can rapidly charge batteries on or off the
radio in one to three hours. These tri-chemistry chargers feature
rapid, trickle, and maintenance modes. The maintenance mode
“revert to rapid” feature ensures batteries remain fully charged
even when left on the charger for extended periods of time. All
chargers are specifically designed to meet the requirements of
batteries manufactured by Motorola.
AAHTN3000
HLN9793
HLN9794
Single-Unit, Rapid-Rate Charger,
120 Volt, US plug
Charger Insert Spacer.
Compatible with “A” version
Chargers only.
Charger Insert Spacer.
Compatible with “B”, “C” and “D”
version Chargers.
Motorola Conditioning Chargers – MCC
WPPN4065_R
Multi-Unit
Conditioning
Charger
The MCC features Instant Fault Detection technology that
detects faulty batteries in seconds. You’ll know right away
when a battery won’t operate at peak performance - saving
you time and trouble. Each unit rapidly charges NiCd and NiMH
batteries and optimizes battery performance. It’s patented
negative pulse charging process minimizes overheating and
overcharging, extending useful battery life. Batteries can be left
on the charger for extended periods of time, without worry of
heat build-up. Optional accessories are available that allow the
MCC to be used in both AC and DC environments
– that’s flexibility.
WPLN4107_R
WPLN4106_R
WPPN4065_R
WPPN4082_R
3080384G15
RLN4814
3080384M21
15
Charger Kit, 120 Volt AC.
Includes both Base Charger Unit
and 7 Volt Adapter Plate.
Charger Kit, 220 Volt AC.
Includes both Base Charger Unit
and 7 Volt Adapter Plate.
Multi-Unit Conditioning Charger,
4-Station Base, 120 Volt.
Adapter Plate sold separately.
7 Volt Adapter Plate
Vehicular Power Adapter
Vehicular Mounting Bracket
and Hard Wire Cable
For Single-Unit Motorola
Conditioning Chargers.
Includes DC Hard
Wire Cable 3080384M21.
DC Hard Wire Cable.
For vehicular installation
RLN4814
Vehicular Mounting
Bracket and
Hard Wire
Cable
IMPRESTM Smart Energy System:
The IMPRES Smart Energy System automatically
reconditions IMPRES batteries
based on actual usage.
Batteries left in the
charger are kept fully
charged so they are
always ready when
IMPRES
Smart Energy Systems
needed.
IMPRES Chargers
Through the use of advanced charging algorithms and automatic reconditioning
features, the IMPRES Smart Energy System ensures maximum talk-time and
optimized battery cycle life. This smart energy system automatically reconditions
IMPRES batteries based on actual usage, keeping them in peak condition.
Talk-time and cycle life are optimized and the need for manual maintenance
programs is eliminated. Its advanced conditioning features allow batteries to
be safely left on the charger for extended periods of time without incurring the
damaging heat build-up which can decrease battery cycle life. In addition,
batteries left in the charger are kept fully charged so they are always ready
when needed. This rapid-rate, tri-chemistry charging system will also charge
compatible non-IMPRES batteries and supports multiple radio platforms.
WPLN4182
WPLN4183
WPLN4184
WPLN4186
WPLN4187
WPLN4188
WPLN4189
IMPRES
IMPRES
IMPRES
IMPRES
IMPRES
IMPRES
IMPRES
Single-Unit Charger, 120 Volt - US
Single-Unit Charger, 240 Volt - UK
Single-Unit Charger, 220 Volt - Euro
Single-Unit Charger, 220 Volt - Arg
Multi-Unit Charger, 120 Volt - US
Multi-Unit Charger, 240 Volt - UK
Multi-Unit Charger, 220 Volt - Euro
WPLN4187
IMPRES
Multi-Unit Charger
WPLN4182
IMPRES
Single-Unit Charger
IMPRES Multi-Unit Chargers with Display Modules
Charger Display Modules provide powerful, “real time” analyzing information for
IMPRES batteries, including current charge status, battery mAh, and voltage.
Readout displays battery kit number, serial number and chemistry and the time
remaining to complete the charge for NiCd and NiMH batteries. 120 Volt.
WPLN4192
NLN7967
WPLN4192
IMPRES
Multi-Unit Charger with Display
Modules
IMPRES Multi-Unit Charger with Display Modules,
US plug
Wall Mount for Multi-Unit Charger
IMPRES Individual Charger Display Module
This module is compatible with the standard IMPRES Multi-Unit Chargers
WPLN4187, WPLN4188 and WPLN4189. Up to 6 modules can be used per
charger, one for each charging pocket. Includes detailed installation instructions.
RLN5382
Charger Display Module for IMPRES Multi-Unit
Charger Version 1.3 or Later.
Note: Display Modules compatible with Multi-Unit Charger version 1.2 or earlier require a
software flash update. Version number is located on label on the bottom of the IMPRES
Multi-Unit charger. If no version is shown, it is earlier than version 1.2. Version 1.2 will appear
as V1.20, 1.3 will appear as V1.30, etc.
16
PRO Series Portable radios
battery analyzers
WPLN4079R
6-Station Battery
Maintenance SystemPLUS
Battery Maintenance SystemPLUS – BMSPLUS
Increase the useful life of your batteries. Using interchangeable
battery adapters (sold separately), the BMSPLUS is capable of charging
and discharging, analyzing, conditioning and cycle testing batteries.
It supports NiCd, NiMH and Li-Ion batteries (Li-Ion 6-station units only) and
tracks better voltage and capacity (mAh). Its easy-to-use design
supports hundreds of two-way, cellular and camcorder batteries. The
BMSPLUS has a 3-year warranty and includes serial printer* port (RS-232).
WPLN4079_R
WPLN4080_R
WPPN4085_R
WPLN4081_R.
NDN4005
NDN4006
6-Station BMSPLUS, 110V, AC, 50/60 Hz - US Plug
6-Station BMSPLUS, 230V, AC, 50/60 Hz - Euro Plug
BMSPLUS Li-Ion Field Upgrade Kit.
Upgrades WPLN4079_R, WPLN4080_R,
Allows units to support Li-Ion batteries.
3-Station BMSPLUS, 110V, AC, 50/60 Hz.
Does not support Li-Ion or 3-cell batteries.
3-Station BMSPLUS, 230V, AC, 50/60 Hz.
Does not support Li-Ion or 3-cell batteries.
NDN4005
3-Station Battery Maintenance
SystemPLUS
B M S PLUS A D A P T E R S
WPPN4079_R
WPPN4080_R
Adapter. For NiCd and NiMH batteries.
Adapter. For NiCd, NiMH, and Li-Ion
batteries. Requires Li-Ion capable BMSPLUS.
*Compatible with the STAR Micronics SP200 Series printers (and other
printers with STAR emulation); available from STAR Micronics distributors.
Battery Optimizing System II – BOS II
No other battery analyzer matches the speed, accuracy, versatility and
ease-of-use of the BOS II in providing powerful analyzing capabilities.
Users can select from 12 pre-programmed service programs making
it quick and easy to get up and running. Because the BOS II is
programmable, users can create custom programs to perform a wi
de variety of tasks specific to individual needs. New enhancements
include new navigation keys and an improved, more intuitive menu system. Regular use of the BOS II can optimize battery performance and
help extend battery life, helping reduce battery replacement costs.
t4VQQPSUGPS/J$E/J.)-J*POBOE4-"CBUUFSJFT8 Power Supply programmable from 100 mAh to 4 Amps per station
t*OUFSDIBOHFBCMF"EBQUFSTBDDPNNPEBUFBMMNBKPSCSBOET
t*ODMVEFTBWBSJFUZPG1SPHSBNTBOEBMMPXTDVTUPNJ[BCMFQSPHSBNNJOH
t1SPQSJFUBSZ3FDPOEJUJPO$ZDMFSFTUPSFT/J$EBOE/J.)CBUUFSJFT
t*ODSFBTFEQSPDFTTJOHQPXFSBOEUFTUJOHSFTPMVUJPOoJODMVEJOH
a Three-minute QuicktestTM that measures the batteries’
State of Health (SoH) Printer Output for reports and labels
t5ISFFZFBS8BSSBOUZ
WPLN4124_R
WPLN4125_R
BOS II, 4-Station, 90-264V, AC,
US Plug. Adapter Plates Required.
BOS II, 4-Station, 90-264V, AC,
Euro/UK Plug. Adapter Plates Required.
BOS ADAPTERS
17
RL-76345
RL76340
Standard Adapter for BOS I
Standard Adapter for BOS II
WPLN4124_R
4-Station Battery
Optimizing System II
Vehicular Travel Chargers:
Always a great traveling companion for Road Warriors,
travel chargers can help ensure constant communication
while on the road.
vehicular chargers
Vehicular Travel Charger
A great traveling companion that ensures constant communication while on the road.
Its small compact design allows the radio to be used while rapid charging in the charger
base. Unit includes a voltage regulated vehicular charger adapter, custom charger base,
mounting bracket and coil cord.
RLN4883
RLN5914
Vehicular Travel Charger
Includes Mounting Bracket 0780384K84.
Travel Charger Mounting Bracket Kit
Includes screws and nylon cord.
TRANSFORMERS FOR TRAVEL
2580600E05
2580600E06
2580600E07
2580600E08
RLN4883
Vehicular
Travel Charger,
radio sold
separately.
Transformer,
Transformer,
Transformer,
Transformer,
120V
230V
230V
220V
-
CHARGER
US
Euro
UK
Argentina
Vehicular Charger
This 12 Volt DC rapid-rate charger is ideal for mobile customers. Capable of charging
NiCd, NiMH, and Li-Ion batteries. This durable unit comes with a metal mounting bracket. Its drop-in design makes it ideal for public safety users.
RLN5233
RLN5233
Vehicular Charger
Vehicular Charger
Vehicular Adapters
Now customers working in areas such as Public Safety and Utilities can both charge
and operate portable two-way radios inside a vehicle. These Vehicular Adapters detect
the chemistry of the portable battery and select the optimum charging method while
providing power for in-vehicle use. In addition, an Antenna Adapter allows automatic
switching to an external Vehicle-mounted Antenna (sold separately) for extended range.
These kits include the Vehicle Adapter, Microphone, RF Adapter, Battery Spacers,
Technical Installation Manual, and Programming Software. 3db gain antennas are recommended for use with these vehicular adapters.
AAEN1006
AAEN1007
5880367B23
5880367B28
ENKN4002
GSN6059
GKN6270
VHF Vehicular Adapter, 136-174 MHz
UHF Vehicular Adapter, 403-470 MHz
Connector Adapter, BNC Female
Connector Adapter, BNC Male
Programming Cable. Required for use with external
speaker or PRO7150 operation.
Audio Service Cable.
For use with PRO7150 RLN4460 test box.
External 13-Watt Speaker
Power Cable with 10A Fuse
ENLN4103
ENLN4104
GMN6146
ENLN4117
WALN4078
8264934B01
6881093C78
6881093C79
VHF Antenna Adapter, 136-174 MHz
UHF Antenna Adapter, 403-470 MHz
Hand-held Mobile Microphone
Vehicle Connector Kit
Battery Spacer Kit
Programming Software
User Manual
Technical Manual
ENKN4003
AAEN1006
VHF
Vehicular Adapter,
Remote Speaker
Microphone
included.
REPLACEMENT PARTS & MANUALS
18
PRO Series Mobile Radios
Motorola Original®
Accessories let you make the
most of your PRO Series Mobile
radio’s capabilities.
You likely chose your Motorola mobile radio for its
ease of use and exceptional reliability — certainly a
sound business decision. Choosing Motorola Original®
accessories for your radio is also the right call to make.
That’s because every Motorola Original® accessory
is designed, built and rigorously tested to the same
quality standards as Motorola radios. So you can be
sure that each will be ready to do its job, time after
time.
What’s more, insisting on Motorola Original®
accessories can help increase your productivity.
That’s because you can count on every accessory to
do its job time after time. If you take a chance on a
mismatched antenna, a clumsy handset or an ill-fitting
mounting, your radio may not perform at the moment
you have to use it.
Keep your Motorola radio performing at its peak. Count
on this collection of Motorola Original® accessories
for your important business communication needs.
You’ll find Public Address Speakers for more crowd
control. In-vehicle mounting accessories for ease of
use when on the move. Base Interface Packages that
extend area coverage and allow remote monitoring of
field units. Control Station accessories for an efficient,
streamlined operation. A variety of antennas to extend
range, and help maximize communication in urban
areas. They’ll help you work smarter, harder and with
greater convenience.
19
PRO Series Professional Radios
offer high performance
and rugged dependability
for users on the move.
PRO SERIES OF PROFESSIONAL RADIOS
PRO5100 Radio
Motorola PRO Series Mobile Radios offer users a compact, ergonomic design with
optimal mounting flexibility. No matter what PRO mobile you use, you’ll enjoy the same
PRO7100 Radio
exceptional quality and user-friendly functionality.
The PRO Series is composed of 4 robust mobile radios tailored to meet the requirements
PRO3100 Radio
of almost any organization. They offer crisp, clean audio even in noisy locations or vehicles,
thanks to Motorola’s X-Pand™ voice technology and a large front-projecting speaker.
Telephone/paging capabilities and Motorola’s precision-controlled MDC signaling features
boost your effectiveness by giving you a wide range of calling options. In addition,
customizable buttons can be programmed for quick access to your favorite features.
20
PRO Series Mobile Radios
AARMN4026
Enhanced Keypad
Microphone
mobile audio
Microphones and Handsets
Standard Compact Microphone
Standard Compact Microphone provides basic Push-To-Talk
functionality and ships with all PRO Series mobile radios.
AARMN4025
NNTN4033
Standard Compact Microphone
Earpiece with Microphone and
Remote PTT. Black.
Enhanced Keypad Microphone
Enhanced Keypad Microphone includes a full keypad that
enables you to dial phone numbers from the microphone, also
has three customizable buttons that can be programmed with
any of the control head features.
AARMN4026
AARMN4038
Heavy-Duty
Microphone
Enhanced Keypad Microphone
Heavy-Duty Microphone
Heavy-Duty Microphone for users who want more durability,
also ideal for those who need a larger microphone that is
easier to handle when wearing gloves.
AARMN4038
Heavy-Duty Microphone
Telephone-Style Handset
Ideal for users wanting to conduct private conversations.
Ergonomically-designed, easy to hold. Includes cup
and hardware.
AAREX4617
Telephone-Style Handset
Hands Free Accessories
Visor Microphone and PTT Switches
Improve convenience and safety with the Visor Microphone
and its compatible hands free transmission options. Small
microphone mounts to vehicle’s visor for convenient hands
free radio operation. Use with choice of external Push-to-Talk
switch.
AARMN4027
Visor Microphone
RLN4857
Pushbutton with Push-to-Talk
Can be held in the hand, or mounted
to the vehicle with touch fasteners.
Foot Switch with Push-to-Talk
Mounts to floor of vehicle
Gooseneck Mount with Push-to-Talk
Attaches to vehicle steering column.
EXTERNAL PTT ACCESSORIES
RLN4856
RLN4858
Emergency Foot Switch
Lets user notify the base station quickly and discreetly of
trouble. Sends signal to station and activates microphone.
RLN4836_R
21
Emergency Foot Switch
Compatible with HMN4089.
AAREX4617
Telephone-Style
Handset
Control Station:
Turn a mobile into a desktop base station.
Perfect for fleet operators in transportation, construction
and public safety industries.
Control Station
The Control Station converts a Mobile two-way radio into an attractive,
convenient base station. This makes an ideal communication solution for
transportation, manufacturing, construction and public safety users.
The radio mounts into the lightweight, portable chassis, containing a full
range of front panel control buttons plus an internal microphone, speaker and
power supply. A front connector allows for a range of external audio
accessories, including a desk microphone, tone or DC remote adapter and
telephone interconnect.
RLN5403
Control Station For PRO series Mobile two-way radios.
RMN5068
Desktop Microphone. Black.
Makes transmission easier for base station
users, because the mobile microphone does not always
have to be picked up.
Large Push-to-Talk button.
Desktop Tray Without Speaker. Ideal for securing mobile
in place in a desktop environment.
Desktop Tray with Speaker
Ideal for securing mobile in place in a desktop
environment. Includes speaker for increased volum
when receiving calls in high-noise areas.
Power Supply, 1-25W, for low power radios.
Power cord included.
Power Supply, 25-60W, for low power radios.
Power cord included.
120 volt Line Cord with US Plug
220 volt Line Cord with Euro Plug
240 volt Line Cord with UK Plug
120 volt Line Cord with Argentina Plug
CONTROL STATION ACCESSORIES
GLN7318
GLN7326
HPN4008
HPN4007
3060665A04
3060665A05
3002120F02
3085801L01
With the Control Station you can
convert a PRO Series mobile radio
into an attractive, convenient base
station. Mobile radio and desktop
microphone both sold separately.
22
PRO Series Mobile Radios
mounting and cables
GLN7317
High-Profile Mounting Bracket
RLN4774
Three-Point Low Band Mount
RLN4781
Direct In Dashboard Mounting Kit
Mounting Brackets
Direct In Dashboard Mounting Kit
PRO radios are often installed on the dash of a vehicle, and
run off its power source. Here are some of the accessories
available for mounting your PRO mobile into your vehicle.
This kit is ideal if you prefer to mount the radio directly
into the dashboard for better appearance or to keep it from
being an obstruction in the vehicle. Control Head compatible
with VHF and UHF only.
GLN7324
GLN7317
RLN4779
RLN4774
Low-Profile Mounting Bracket
Keeps radio tucked up under the dash,
can also be positioned for floor mount.
High-Profile Mounting Bracket
Keeps radio tucked up under the dash,
with extra clearance so radio can be
tilted for a better view. Can also be
positioned for floor mounting.
Key Lock Mount
Key lock helps provide extra protection
from theft. Lock/unlock radio from
position in the mounting bracket.
Three-Point Low Band Mount
Three-point Mount provides extra
stability for mounting low band
radio models.
RLN4781
Direct In Dashboard Mounting Kit
Remote Mounting Kits
These kits allow you to mount the radio chassis in the trunk
or under the seat and mount the control head elsewhere in
the vehicle. Ideal for vehicles with no convenient place to
mount the radio near the dashboard, or where security is a
concern.
RLN4801
RLN4802
Remote Mount
Remote Mount
Remote Mounting Cables
These cables are used to connect the radio chassis to the
control head.
RKN4077
RKN4078
RKN4079
3m Remote Mount Cable
5m Remote Mount Cable
7m Remote Mount Cable
Cables to Battery
Cables used to connect the battery to the radio chassis.
HKN4191
HKN4192
HKN9327R
23
High Power Cable, 12 volt, 40-60 watt
Power Cable, 12 volt, 20 foot
Ignition Switch Cable
Public Address:
External speakers and public address kits
are an absolute necessity for high-noise environments
and special events.
Desktop Microphone
for base station users,
sold separately.
Speakers and Public Address Kits
College campuses, commercial and industrial complexes,
government facilities,military bases, municipal district, local
schools and even cities have a great need to be able to
communicate with the public in the event of an emergency,
public events or festivals. These accessories can help you
get the word out whether it’s from a vehicle or from a
desktop station through speakers at a fixed location.
External 7.5 Watt Speaker.
SPEAKERS
RSN4001
HSN8145
External 13 Watt Speaker
Ideal for extreme noise environments.
External 7.5 Watt Speaker
Offers a high level of volume output.
PUBLIC ADDRESS
RLN5288
HSN1000
HKN9324_R
Public Address Kit
Includes two cables for mobile
connection to public address box and
speaker cables. Requires HSN1000
speaker.
Amplified External Speaker for Public
Address Audio. 6 Watt.
Required for use with RLN5288.
Public Address/Speaker Cable
15 foot length. One cable per
speaker required.
Amplified External
Speaker for Public
Address Audio Kit.
External 13 Watt Speaker
is perfect for noisy
environments.
Button Kits
Your PRO mobile radio will last for years but you may need to order replacement buttons
occasionally. The following kits offer the most commonly needed replacements.
PRO3100
RLN4829
Replacement Button Kit
Includes MON (Monitor) and SCAN buttons.
RLN4830
Replacement Button Kit
Includes ZONE, X-PAND, HI/LO, EMERGENCY, and V STR buttons.
Replacement Button Kit
Includes MON (Monitor), SCAN, CALL, PHONE and HOME buttons.
RLN4829
Replacement Button Kit For
PRO3100
PRO5100 / PRO7100
RLN4831
Voice Storage Option Board
Voice Storage Option Board enables you to record and playback
memos or incoming radio calls.
AAHLN9725
Voice Storage Option Board
24
Point-of-Sale:
The Magnetic Credit Card Reader relays data
for point-of-sale transactions in the transportation
industry and delivery businesses.
RDN6011
With the
Master Unit
you can
stay connected
with up to 8
PRO Mobiles,
radio sold
separately.
Peripherals
Magnetic Credit Card Reader
This Magnetic Credit Card Reader is used to capture card data which is relayed to the
mobile data unit for Point-of-Sales transactions, used with Credit Card Processing
Software RDN7379. AVL Messaging Status Software (RDN7378) and Programming
Software (RDN7374) required.
RDN7371
RDN7379
Magnetic Credit Card Reader
Credit Card Processing Software
The Mobile Printer
The Mobile Printer provides users with a hard copy of the information transmitted from the
base dispatch location, for use with Magnetic Credit Card Reader RDN7371. AVL Messaging
Status Software (RDN7378) and Programming Software (RDN7374) required.
RDN7373
RDN7374
The Mobile Printer
Programming Software
Positioning Monitors
Allows for remote control and monitoring of equipment and operations through two-way
radio systems. AVL Messaging Status Software (RDN7378) and Programming Software
(RDN7374) required.
RDN6011
RDN6010
Master Unit
Master unit connects to a PRO mobile and can monitor up to
8 separate field units that are connected to PRO Mobiles.
Field Unit
Two-way technology is used to monitor equipment and operations,
field units will immediately shut down in the event of malfunction.
MISCELLANEOUS ACCESSORIES
RDN7364
RDN7738
25
Base Modem
A radio channel controller and modem that interfaces with the base
radio, required with every radio channel or wireless circuit used
within the system.
Serial Breakout Unit
Needed for multi-channel operations.
PRO Series Mobile Radios
antennas and kits
Wave Base Roof Mount Antennas
GPS Antennas
The signals for these antennas are radiated vertically, making them ideal for urban environments where buildings
might obstruct the signal.
These antennas are used to receive GPS signals.
RAB4002_R
RAB4003_R
RAB4004_R
HAD4006
HAD4007
HAD4008
HAD4009
HAE4002
HAE4003
HAE4004
29.7-36.0 MHz, 1/4 Wave Base Loaded
Roof Mount Antenna
36-42 MHz, 1/4 Wave Base Loaded
Roof Mount Antenna
42-50 MHz, 1/4 Wave Base Loaded
Roof Mount Antenna
136-144 MHz, 1/4 Wave
Roof Mount Antenna
144-152 MHz, 1/4 Wave
Roof Mount Antenna
152-162 MHz, 1/4 Wave
Roof Mount Antenna
162-174 MHz, 1/4 Wave
Roof Mount Antenna
403-430 MHz, 1/4 Wave
Roof Mount Antenna
450-470 MHz, 1/4 Wave
Roof Mount Antenna
470-512 MHz, 1/4 Wave
Roof Mount Antenna
Magnetic/Roof Mount Antennas
These antennas are designed to direct the signal more
towards the horizon, making them ideal for applications in
more geographically flat regions where signal coverage is
sparse and must cover a larger area.
RAD4000
HAD4014
HAE4010
HAE4011
HAE4012
RAE4004_R
HAE4013
HAD4008
VHF, Low Band, 140-174 MHz, 3dB
Gain Magnetic Mount Antenna
VHF, 144-174 MHz, 3dB Gain
Roof Mount Antenna
UHF, 403-430 MHz, 3.5dB Gain
Roof Mount Antenna
UHF, 450-470 MHz, 3.5dB Gain
Roof Mount Antenna
UHF, 470-495 MHz, 3.5dB Gain
Roof Mount Antenna
UHF, 440-470 MHz, 5dB Gain
Roof Mount Antenna
UHF, 494-512 MHz, 3.5dB Gain
Roof Mount Antenna
HAD4009
HAE4003
RDN7372
RDN7375
Fixed Mount GPS Active Antenna
Magnetic Mount GPS Active Antenna
Low Profile Antennas
Compact design is a key feature of low profile antennas.
UHF ANTENNAS
RAE4162
RAE4163
RAE4164
RAE4165
RAE4166
RAE4167
RAE4168
RAE4169
White, 410-430 MHz, 3dB Gain Antenna
Black, 410-430 MHz, 3dB Gain Antenna
Black, 430-450 MHz, 3dB Gain Antenna
White, 430-450 MHz, 3dB Gain Antenna
Black, 470-490 MHz, 3dB Gain Antenna
White, 450-470 MHz, 3dB Gain Antenna
Black, 450-470 MHz, 3dB Gain Antenna
White, 470-490 MHz, 3dB Gain Antenna
RAD4207
RAD4208
RAD4209
RAD4210
White, 150-168 MHz, Unity Gain Antenna
Black, 150-168 MHz, Unity Gain Antenna
Black, 142-160 MHz, Unity Gain Antenna
White, 142-160 MHz, Unity Gain Antenna
RAF4217
RAF4218
RAF4219
RAF4220
White, 821-896 MHz, 3dB Gain Antenna
Black, 821-896 MHz, 3dB Gain Antenna
Black, 806-866 MHz, 3dB Gain Antenna
White, 806-866 MHz, 3dB Gain Antenna
3080384M44
Black Magnetic with 12 ft. of
RG58A/U Cable, Mini UHF Crimp
Chrome Magnetic with 12 ft. of
RG58A/U Cable, Mini UHF Crimp
3/4 Inch Roof Mount with 17 ft. of
RG58A/U Cable, Mini UHF Crimp
Chrome Trunk Mount with 17 ft. of
RG58A/U Cable, Mini UHF Crimp
Black Trunk Mount with 17 ft. of
RG58A/U Cable, Mini UHF Crimp
VHF ANTENNAS
800 MHz ANTENNAS
MOUNTING KITS
3080384M45
3080384M48
3080384M46
3080384M47
Mini UHF Crimp is included with
RG58A/U cable in our selection
of Mounting Kits.
HAD4006
HAE4013
26
Antennas that radiate vertically are ideal for urban
environments. Direct signal antennas are designed for
locations where signal coverage is sparse and
must cover a larger area.
antenna gain
characteristics
The above diagram compares a Unity
Low Profile Antenna Kits
These complete kits make installation easy for multipoint mobile applications.
Perfect for service vehicles, public transportation, law enforcement, mining and
construction vehicles, as well a numerous other commercial and industrial applications where mobility is a requirement. All kits include a 3/4 inch brass mount
with 17 feet of RG58U/U cable.
gain or 0dB antenna with 3dB and 6dB
radiation patterns. From the diagram
above you can see that it is possible to
communicate with a cell site
UHF ANTENNA KITS
RAE4162_RB
RAE4163_RB
RAE4164_RB
RAE4165_RB
RAE4166_RB
RAE4167_RB
RAE4168_RB
RAE4169_RB
White, 410-430 MHz, 3dB Gain Roof Mount Antenna
Black, 410-430 MHz, 3dB Gain Roof Mount Antenna
Black, 430-450 MHz, 3dB Gain Roof Mount Antenna
White, 430-450 MHz, 3dB Gain Roof Mount Antenna
Black, 470-490 MHz, 3dB Gain Roof Mount Antenna
White, 450-470 MHz, 3dB Gain Roof Mount Antenna
Black, 450-470 MHz, 3dB Gain Roof Mount Antenna
White, 470-490 MHz, 3dB Gain Roof Mount Antenna
further away. There are a few traps
VHF ANTENNA KITS
RAD4207_RB
RAD4208_RB
RAD4209_RB
RAD4210_RB
White, 150-168 MHz, Unity Gain Roof Mount Antenna
Black, 150-168 MHz, Unity Gain Roof Mount Antenna
Black, 142-160 MHz, Unity Gain Roof Mount Antenna
White, 142-160 MHz, Unity Gain Roof Mount Antenna
mountains in a valley. This means
RAF4217_RB
RAF4218_RB
RAF4219_RB
RAF4220_RB
White, 821-896 MHz, 3dB Gain Roof Mount Antenna
Black, 821-896 MHz, 3dB Gain Roof Mount Antenna
Black, 806-866 MHz, 3dB Gain Roof Mount Antenna
White, 806-866 MHz, 3dB Gain Roof Mount Antenna
800MHz ANTENNA KITS
however, these high frequency signals
have a tendency to bounce off
buildings in built up areas, and off
a high gain antenna is best-used in
country areas where wide flat plains
are between you and the cell site.
In mountainous areas or in city
environments where the topography
varies considerably, a high gain
radiation pattern will not work as
efficiently as a unity gain.
27
PRO Series Elite
PMMN4022
Remote Speaker
Microphone with
IP57 Rating
audio
Windporting Remote Speaker Microphones
The Windporting feature of these microphones helps lessen
background noise from high winds and other severe weather
conditions. Audio can pass through the speaker grill even
when the microphone port is blocked by water. Now public
safety professionals can be more confident than ever of
clear, understandable communication when Mother Nature is
uncooperative. The Windporting Remote Speaker Microphones
allow talking and listening without removing the radio from
the belt or case. Both have a coiled cord, Push-to-Talk switch,
swivel clip, and quick disconnect latch.
PMMN4022
PMMN4023
PMLN4620
D-Style
Earpiece
Remote Speaker Microphone
with 3.5mm Audio Jack
Remote Speaker Microphone
with IP57 Rating
Remote Speaker Microphone Accessories
These accessories are to be used with remote speaker
microphone PMMN4022 using 3.5mm Adapter.
AARLN4885*
RLN4941*
WADN4190*
PMLN4620
Receive-Only Covered Earbud
Receive-Only Earpiece with
Translucent Tube and Rubber Eartip
Receive-Only Flexible Earpiece
D-Style Earpiece with 3.5mm Plug.
Receive only.
Clear Comfortable Earpieces
These earpieces form to the inside of the ear and are
perfect for low-noise environments. Made of easy-to-clean,
chemically-inert, hypo-allergenic material. Compatible with
Noise and Surveillance Kits.
RLN4760
RLN4761
RLN4762
RLN4763
RLN4764
RLN4765
Small Custom Earpiece - Right Ear
Medium Custom Earpiece - Right Ear
Large Custom Earpiece - Right Ear
Small Custom Earpiece - Left Ear
Medium Custom Earpiece - Left Ear
Large Custom Earpiece - Left Ear
An earphone jack
located on the
microphone head
allows the user
to receive
discreet audio
when used with
the earpieces
shown here.
AARLN4885
Receive-Only Covered Earbud
RLN4941
Receive-Only Earpiece
From left to right,
top to bottom:
RLN4765
RLN4762
RLN4764
RLN4761
RLN4763
RLN4760
*Intrinsically Safe (FM).
29
WADN4190
Receive-Only
Flexible Earpiece
Surveillance Kits:
Surveillance accessories allow users to receive messages
through the earpiece and are ideal in environments that
require discreet communication.
Surveillance Kits
Surveillance accessories allow the radio user to privately receive messages with the earpiece and are
ideal when environments require discreet communication. These surveillance accessories require the
3.5mm threaded audio adapter PMLN4455, unless being used with a speaker microphone.
1-WIRE SURVEILLANCE KITS
BDN6664*
BDN6665*†
BDN6726*
BDN6727*†
BDN6666*†
BDN6728*
Receive-Only Earpiece with Standard Earphone (1-Wire). Beige.
Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire). Beige.
Receive-Only Earpiece with Standard Earphone (1-Wire). Black
Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire). Black
Receive-Only Earpiece with Volume Control and Earloop (1-Wire). Beige.
Receive-Only Earpiece with Volume Control and Earloop (1-Wire). Black.
2-WIRE SURVEILLANCE KITS
BDN6667*
BDN6669*†
BDN6729*
BDN6731*†
Earpiece with Microphone and PTT Combined (2-Wire). Beige.
Extra Loud Earpiece with Microphone and PTT Combined (2-Wire). Beige.
Earpiece with Microphone and PTT Combined (2-Wire). Black.
Extra Loud Earpiece with Microphone and PTT Combined (2-Wire). Black.
3-WIRE SURVEILLANCE KITS
BDN6668*
BDN6670*†
BDN6730*
BDN6732*†
PMLN4455*
Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Beige.
Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Beige.
Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Black
Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Black
3.5mm Audio Adapter
BDN6664
Receive-Only Earpiece with
Standard Earphone
BDN6667
Earpiece with Microphone
and PTT Combined
*Intrinsically Safe (FM).
† Extra loud earphone (exceeds OSHA limits).
30
PRO Series Elite
audio
Disconnect Noise Kits
Extreme Noise Kits provide extra comfort and/or noise protection for users wearing surveillance
accessories. Lightweight, translucent tube attaches to Motorola surveillance accessories to provide
flexibility and comfort, which now includes a new quick disconnect adapter. The Quick Disconnect
Adapter allows users, especially those in multiple shift operations, to easily remove or alternate
acoustic tubes. Clothing clip prevents accessory from being pulled from the ear due to body movement or head rotation. For optimal performance, Extra Loud Earphones are recommended.
RLN6230
RLN6231
RLN6232
RLN6241
5080369E39†
5080370E91†
Quick Disconnect Extreme Noise Kit. Includes 2 foam earplugs
For high-noise environments. Noise reduction = 24dB.
Can be used with Clear Comfortable Earpieces. Black.
Extreme Noise Kit. Includes 2 foam earplugs
For high-noise environments. Noise reduction = 24dB.
Can be used with Clear Comfortable Earpieces. Beige.
Quick Disconnect Low Noise Kit - Clear Acoustic Tube Assembly
Includes 1 clear rubber eartip. For low-noise environments,
does not provide hearing protection. Black.
Low Noise Kit - Clear Acoustic Tube Assembly
Includes 1 clear rubber eartip. For low-noise environments,
does not provide hearing protection. Beige.
Extra Loud Earphone. Beige.
Extra Loud Earphone. Black.
REPLACEMENT ACCESSORIES
RLN6242
5080384F72
5080370E97
Quick Disconnect Acoustic Tube Replacement
Foam Plugs. Noise reduction = 24dB. Pack of 50
For RLN6230 and RLN6231.
Standard Clear Rubber Eartips. Pack of 25
For RLN6232 and RLN6241.
RLN6230
Extreme
Noise Kit
† Extra loud earphone (exceeds OSHA limits).
RLN6241
Low Noise Kit
31
Completely Discreet Earpiece
Enables users to communicate with ease, in full privacy, without visible equipment. This miniaturized receiver is discreetly
hidden in the ear, where it can be worn comfortably for long
periods of time. Small as it is, it offers a full range of audio functions including automatic squelch, automatic gain control and
noise filtering. Average battery life is approximately 100 hours
and includes an end-of-life warning signal when the
battery needs to be changed. Kit includes wireless receiver,
inductive neckloop, 6 spare batteries and 5 spare earguards.
For use with any standard 2 or 3-Wire Motorola Surveillance Kit.
RLN4922
RLN4919
RNN4055
Completely Discreet Earpiece Kit
Replacement Earguards. 5 per pack.
Replacement 1.4 Volt Batteries.
6 per pack.
Flexible Ear Receiver
This receive-only earpiece contains a flexible earloop and
speaker which rests external to the ear. It plugs directly
into adapter or the earjack on speaker microphones.
BDN6719
PMLN4455
7580372E11
RLN4922
Completely
Discreet
Earpiece
Kit
Flexible Ear Receiver
Requires Audio Adapter PMLN4455.
3.5mm Audio Adapter
Replacement Foam Ear Cushion
The Completely Discreet
Earpiece is easy to use.
Simply remove the earpiece from any
standard 2 or 3-Wire
Motorola Surveillance Kit
and plug in the neckloop,
which is easily hidden
under clothing. Security
personnel will be able to
wear this tiny receiver
comfortably for hours
at a time!
Completely Discreet
Earpiece Receiver
BDN6719
Flexible Ear
Receiver
32
PRO Series Elite
audio
Temple Transducer
The Temple Transducer represents a significant achievement in
headset design and functionality. It allows the user to receive audio
without covering the ear. The receiver portion of this accessory rests
on the temples and is capable of converting the receive audio from
a two-way radio into sound vibration. Sound vibration is transmitted
through the surrounding tissue and bone directly into the inner ear. It
features an In-line PTT and noise-cancelling boom microphone. The
Temple Transducer can help enhance communication and safety by
allowing external sounds, such as machinery and equipment, warning and fire alarms, the intercom, traffic and even casual conversations with co-workers. In high-noise environments it allows the use
of earplugs. Compatible with PRO Series Elite radios.
PMLN4585*
0180305J46
Temple Transducer
Training CD-ROM. For EMS and
Temple Transducer.
Temple Transducer:
Representing a significant
achievement in headset
design and functionality, it
allows the user to receive
audio without covering
the ear.
PMLN4585
Temple Transducer
33
*Intrinsically Safe (FM).
JMMN4066
Lightweight Headset
with Boom
Microphone
Pellet-Style Earpieces
Pellet-style earpieces allow users to receive communication
discreetly and are comfortable for extended-wear use.
PMLN4519*
PMLN4455
7580372E70
*Intrinsically Safe (FM).
Earbud with Microphone and Push-to-Talk
Requires adapter PMLN4455.
3.5mm Audio Adapter
Replacement Foam Cushion
for Pellet Earpieces
RLN5590
Lightweight Headset with
Swivel Boom
Microphone
34
PRO Series Elite
audio
Lightweight Headsets
Lightweight headsets provide high-clarity, hands free, discreet
two-way communication, while maintaining the comfort
necessary for extended-wear in moderate noise environments.
NMN6245*
NMN6246*
JMMN4066*
RLN5590
PMLN4455
Single-Muff, Adjustable, Lightweight
Headset with In-Line PTT Switch and
Boom Microphone. Earbud style.
Requires audio adapter PMLN4455.
Ultra-Lightweight Headset with Boom
Microphone, In-Line PTT Switch.
Earbud style receiver.
Requires audio adapter PMLN4455.
Single-Muff, Adjustable, Lightweight
Headset with Boom Microphone,
In-Line PTT Switch
Lightweight Headset with Swivel Boom
Microphone, no In-Line PTT Switch
3.5mm Audio Adapter
NMN6245
Lightweight Headset
with In-Line PTT
PMLN4519
Pellet-style earpieces allow
users to receive communication
discreetly and are comfortable
for extended-wear use.
NMN6246
Ultra-Lightweight
Headset
with Boom
Microphone
*Intrinsically Safe (FM).
35
The D-Style Earset:
The D-Style Earset is comfortable and has a
sleek appearance. Ideal for Hospitality, Retail,
Education and Private Security teams.
PMLN4657
D-Style Earset
D-Style Earset
The D-Style Earset is designed to ensure comfort of use while providing
an elegant, sleek appearance. This lightweight, comfortable earset can
be worn on either ear and allows for hands free communication with
excellent audio clarity through the large speaker. Includes a flexible boom
microphone and In-line Push-to-Talk button with built-in VOX switch for
ease or use. The earset is ideal for users in Hospitality, Retail, Event
Coordination, Education and Private Security industries.
PMLN4657
D-Style Earset with Flexible Boom
Microphone, In-Line Push-to-Talk and VOX Switch
D-Style Earsets are
designed for front line
personnel and
coordinators
where projecting a
professional image
is as important
as reliable, seamless
communication.
36
PRO Series Elite
RMN5015
Racing Headset
audio
Racing Headset
This heavy-duty headset can be worn with most hardhats. It’s
ideal for high-noise environments, racing teams like CART® use
it in the pits for dependable communication. Adapter required,
sold separately.
RMN5015
RKN4093
Racing Headset
Adapter Cable for RMN5015
The same winning quality and
dependability you see at
professional football stadiums and
motor speedways can be yours
with the Motorola Racing Headset.
BDN6645
Push-to-Talk
Headset with
Boom
Microphone
Heavy-Duty Headset
Includes a noise-cancelling boom microphone and can be worn
with or without a hardhat. The Push-to-Talk switch is located on
the earcup. Requires adapter RKN4093, sold separately.
BDN6645
Push-to-Talk Headset with Boom
Microphone. Noise reduction = 24dB.
RKN4093
Adapter Cable
37
*Intrinsically Safe (FM).
Carry Accessories:
You’d be surprised how much time can be saved when a radio
is always in the same place — made easy by this versatile case
selection of Motorola Original® carry accessories.
PMLN4421
Soft Leather Carry
Case with fixed Swivel
Clip,
radio sold
separately.
carry accessories
Carrying Cases
Carrying cases are available in sizes designed to fit your radio and battery
and permit audio to be heard clearly. Belt loop and nylon cases feature
“D” rings that allow the cases to be attached to a carrying strap.
PRO5150 ELITE CASES
PMLN4421
PMLN4471
PMLN4470
Soft Leather Carry Case with fixed Swivel
Clip — The case protects the radio while
allowing audio to be heard clearly
Hard Leather Display Carry Case
with Swivel and D-Rings
Nylon Case with Belt Loop and D-Rings
PMLN4520
Hard Leather
Carry Case
PRO7150 ELITE CASES
PMLN4520
PMLN4521
Hard Leather Display Carry Case with
Swivel and D-Rings
Soft Leather Carry Case with
Fixed Swivel Clip and D-Ring
CARRY ACCESSORIES
JMZN4023
JMZN4020
4200865599
NTN5243
Plastic Carry Holster with Swivel Belt Clip
Lightweight carry holster provides a
convenient means for carrying the radio;
the swivel belt clip allows rotation of the
radio to a comfortable position.
Radio Handstrap
Attaches to the radio allowing it to be worn
around the wrist.
1.75 Inch Wide Black Leather Belt
For all models.
Adjustable Black Nylon Carrying Strap
Attaches to “D” ring on case.
NTN5243
Adjustable Black Nylon
Carrying Strap
JMZN4023
Plastic
Carry Holster with
Swivel Belt Clip shown
with Accessory
Dust Cover JMLN4638.
WATERPROOF BAG
HLN9985
Waterproof Bag
Includes large carrying strap.
JMLN4638
Accessory Dust Cover
Protects the audio side connector.
MISCELLANEOUS
38
PRO Series Elite
carry packs
Universal Chest Pack
Motorola Original® Universal Chest Pack protects the radio
and provides the freedom from holding it during standby
communication mode. Universal Chest Pack fits most radios.
HLN6602
1505596Z02
Universal Chest Pack with Radio
Holder, Pen Holder and Velcro
Secured Pouch
Replacement Strap for HLN6602
HLN6602
Universal Chest
Pack with Radio
Holder, Pen
Holder and
Velcro Secured
Pouch
Break-A-Way Chest Pack
All the features of the original Universal Chest Pack
(HLN6602) plus break-a-way tabs that allow the entire pack
to be pulled off with approximately 10 lbs. of pressure.
RLN4570
1505596Z02
Break-a-Way Chest Pack with Radio
Holder, Pen Holder and Velcro
Secured Pouch.
Replacement Strap for RLN4570
RadioPAk™
The RadioPAk is lightweight and comfortable. Worn around
the waist, it keeps radios/phones at hand. It features a
separate 6 x 8 inch zippered pouch for other on-the-job
necessities. Adjustable woven nylon belt fits both men and
women.
RLN4815
4280384F89
RadioPAk Radio/Utility Case
RadioPAk Extension Belt
For waists larger than 40 inches.
Unlike rigid holders,
the universal-fit RadioPAk
is lightweight and comfortable.
An ideal companion for
two-way radios, as well as
iDEN® portables
39
and cellular phones.
RLN4815
RadioPAk
Motorola Original® Batteries:
Motorola batteries are ruggedly designed for lasting durability
and are system tested with Motorola two-way radios to
ensure optimum performance.
JMNN4023_R and
JMNN4024_R
Motorola Original®
Batteries
batteries
Motorola Original® Batteries
Motorola Original® Batteries are ruggedly designed for lasting durability and are
system tested with Motorola two-way radios to ensure optimum performance.
We offer various chemistry and capacity alternatives, allowing the user to
select the ideal battery for his or her needs. NiCd is best suited for extremetemperature operation, and provides the maximum number of charge/discharge
cycles. Li-Ion batteries offer extended duty cycles – providing more talk time per
shift.
PREMIUM LITHIUM ION - Li-Ion
JMNN4023_R
JMNN4024_R
JMNN4073_R
JMNN4074_R
1000
1300
1400
1400
mAh,
mAh,
mAh,
mAh,
7.5V (Slim)
7.5V
FM Li-Ion, 7.5V, IP67, Ruggedized
Li-Ion, 7.5V, IP67, Ruggedized
PMNN4073
Li-Ion Battery, IP67, Intrinsically Safe (FM)
antennas
Stubby Antennas
NAD6502
Stubby antennas are ideal when the radio is worn on the belt because they are
short and non-obtrusive. These rugged, helical antennas feature a capless sheath
that allows for maximum flexibility.
PMAD4012
PMAD4025
PMAD4013
PMAE4002
PMAE4006
VHF Stubby Antenna, 136-155 MHz, 3.5 Inch
VHF Stubby Antenna, 150-161 MHz, 3.5 Inch
VHF Stubby Antenna, 155-174 MHz, 3.5 Inch
UHF Stubby Antenna, 403-433 MHz, 3.5 Inch
UHF Stubby Antenna, 465-495 MHz, 3.5 Inch
NAE6843_R
Flexible Whip Antennas
Flexible Whip Antennas have a one-piece finish, steel core, and spiral wound
conductor for optimal radiation characteristics.
8504762J01
PMAD4023
8504762J02
NAE6483_R
NAD6502_R
NAD6579
PMAD4013
VHF Whip Antenna, 136-155 MHz, 5.5 Inch
VHF Whip Antenna, 150-161 MHz, 5.5 Inch
VHF Whip Antenna, 155-174 MHz, 5.5 Inch
UHF Flexible Whip Antenna, 403-520 MHz, 6 Inch
VHF Whip Antenna, 150-162 MHz, 6 Inch
VHF Whip Antenna, 148-161 MHz, 7.5 Inch
40
PRO Series
AAHTN3000
Single-Unit,
Rapid-Rate
Charger
chargers
Single Unit Rapid-Rate, Universal Chargers
Single Unit Chargers can rapidly charge batteries on or off the
radio in one to three hours. These tri-chemistry chargers feature
rapid, trickle, and maintenance modes. The maintenance mode
“revert to rapid” feature ensures batteries remain fully charged
even when left on the charger for extended periods of time. All
chargers are specifically designed to meet the requirements of
batteries manufactured by Motorola.
AAHTN3000
Single-Unit, Rapid-Rate Charger,
120 Volt, US plug
WPLN4187
IMPRES
Multi-Unit Charger
IMPRES™ Multi-Unit, Rapid-Rate Charger
Through the use of advanced charging algorithms and automatic
reconditioning features, the IMPRES Smart Energy System
ensures maximum talk-time and optimized battery cycle life.
This smart energy system automatically reconditions IMPRES
batteries based on actual usage, keeping them in peak condition.
Talk-time and cycle life are optimized and the need for manual
maintenance programs is eliminated. Its advanced conditioning
features allow batteries to be safely left on the charger for
extended periods of time without incurring the damaging heat
build-up which can decrease battery cycle life. In addition,
batteries left in the charger are kept fully charged so they are
always ready when needed. This rapid-rate, tri-chemistry charging
system will also charge compatible non-IMPRES batteries
including Expert Series non-IMPRES batteries and supports
multiple radio platforms.
WPLN4187
WPLN4188
WPLN4189
NLN7967
IMPRES Multi-Unit Charger, 120V - US
IMPRES Multi-Unit Charger, 220V - Euro
IMPRES Multi-Unit Charger, 240V - UK
Wall Mount for Multi-Unit Chargers
WPLN4079_R
6-Station Battery
Maintenance SystemPLUS
Battery Maintenance SystemPLUS – BMSPLUS
Increase the useful life of your batteries. Using interchangeable
battery adapters (sold separately), the BMSPLUS is capable of
charging and discharging, analyzing, conditioning and cycle
testing batteries. It supports NiCd, NiMH and Li-Ion batteries
(Li-Ion 6-station units only) and tracks better voltage and capacity
(mAh). Its easy-to-use design supports hundreds of two-way,
cellular and camcorder batteries. The BMSPLUS has a 3-year
warranty and includes serial printer* port (RS-232).
WPLN4079_R
WPLN4080_R
WPPN4085_R
NDN4005
NDN4006
41
6-Station BMSPLUS
120V, AC, 50/60 Hz, US Plug
6-Station BMSPLUS
230V, AC, 50/60 Hz, Euro Plug
BMSPLUS Li-Ion Field Upgrade Kit.
Upgrades WPLN4079_R, and
WPLN4080AR. Allows units to
support Li-Ion batteries.
3-Station BMSPLUS, 120V, AC, 50/60 Hz
Does not support Li-Ion or 3-cell batteries.
3-Station BMSPLUS, 230V, AC, 50/60 Hz
Does not support Li-Ion or 3-cell batteries.
*Compatible with STAR Micronics SP200 Series printers (and other printers
with STAR emulation); available from any STAR Micronics distributor.
BMSPLUS Adapters
WPPN4079_R
WPPN4080_R
Adapter For
NiCd and NiMH batteries.
Adapter For
NiCd, NiMH,
and Li-Ion batteries.
Requires Li-Ion
capable BMSPLUS.
Battery Optimizing System II:
Regular use of the BOS II can optimize battery performance
and help extend battery life, helping reduce
battery replacement costs.
WPLN4124_R
4-Station BOS II
Battery Optimizing System II – BOS II
No other battery analyzer matches the speed, accuracy, versatility and
ease-of-use of the BOS II in providing powerful analyzing capabilities.
Users can select from 12 pre-programmed service programs making
it quick and easy to get up and running. Because the BOS II is
programmable, users can create custom programs to perform a wide
variety of tasks specific to individual needs. New enhancements include
new navigation keys and an improved, more intuitive menu system.
Regular use of the BOS II can optimize battery performance and help
extend battery life, helping reduce battery replacement costs.
t4VQQPSUGPS/J$E/J.)-J*POBOE4-"CBUUFSJFT
100W Power Supply programmable from
100 mAh to 4 Amps per station
t*OUFSDIBOHFBCMF"EBQUFSTBDDPNNPEBUFBMMNBKPSCSBOET
t*ODMVEFTBWBSJFUZPG6TFS1SPHSBNTBOEBMMPXT customizable programming
t1SPQSJFUBSZ3FDPOEJUJPO$ZDMFSFTUPSFT/J$EBOE/J.)CBUUFSJFT
t*ODSFBTFEQSPDFTTJOHQPXFSBOEUFTUJOHSFTPMVUJPOoJODMVEJOH
a Three-minute QuicktestTM that measures the batteries’ State of
Health (SoH) Printer Output for reports and labels
t5ISFFZFBS8BSSBOUZ
WPLN4124_R
WPLN4125_R
BOS II, 4-Station, 90-264V, AC,
US Plug. Adapter Plates Required.
BOS II, 4-Station, 90-264V, AC,
Euro/UK Plug. Adapter Plates Required.
BOS Adapters
RL-76345
RL76340
RL-77255
Standard Adapter for BOS I
Standard Adapter for BOS II
Standard Adapter for BOS II. For Li-Ion batteries.
42
STREAMLINED SOLUTIONS FOR A
SINGLE RADIO OR ENTIRE FLEET
motorola.com/radiosolutions
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. © Motorola, Inc. 2008.
NFL Enterprises, L.P. NFL and the NFL shield design are registered
trademarks of the National Football League.
Specifications subject to change without notice.
LE-ACCY-PROSERIES-01/08
Every Motorola Professional Series portable and mobile radio can be
customized to suit your current and future communication needs.
All Motorola Original® accessories are built to the highest standards
of quality, and are specially engineered to perfect complement your
radio’s performance.
So don’t wait any longer to increase your productivity with optimum
two-way radio performance. Call now for more information.
Download PDF