Sharp | PG-M10XE | 10A Advanced Power Conditioner

www.furmansound.com 1
220V-240V PRO LINE PRODUCT CATALOG
Founded in 1974,
Furman is the leading provider of power
management solutions for audio, video and
broadcast professionals. From pioneering
the concept of power conditioning in 1983 to
introducing advanced technologies such as
Series Multi-Stage Protection and Linear
Filtering Technology, Furman is committed to
providing the highest level of performance
and protection to equipment used in
mission-critical applications around
the world.
2 www.furmansound.com
FURMAN TECHNOLOGY
THE FURMAN DIFFERENCE
For over 35 years, Furman has been the industry’s most trusted name in AC conditioning, regulation, balanced isolation transformers, sequencing
and distribution for audio, video, and broadcast professionals. Our clients include respected professional musicians, renowned recording studios,
commercial contractors, and touring groups that handle major concert tours across the world. They choose Furman because of our reputation
for reliability, our engineering expertise, and our years of experience focusing on the specific needs of industry professionals that cannot afford
equipment failure or downtime.
Furman’s trusted reputation has been earned by the millions of dollars of equipment that we have saved from power problems around the world
and our innovation of technologies that maximize the performance of A/V systems. For our clients, operating a system that is not delivered safe,
clean power by a Furman unit is simply out of the question.
FURMAN FEATURES AND TECHNOLOGIES
SERIES MULTI-STAGE PROTECTION (SMP)
Audio/video professionals can never accept down time, corrupted data, or unreliability. It is for this reason that a robust,
professional level transient voltage surge suppression system, such as SMP, is the best choice for critical applications.
With SMP, there is virtually no downtime. In fact, the circuit is tested to handle multiple 6000 volt or 3000 amp pulses without sustaining any
damage. This is far beyond the demands placed on typical surge suppressors. But because of the extreme conditions and critical applications
faced by Furman’s clients, the SMP circuit has been designed to pass this severe test and ensure that equipment damage or maintenance is
extremely unlikely.
Furman’s SMP relies on a network of components to slow down the impact of a potentially catastrophic surge by capturing it, dissipating it in
the form of heat, and absorbing the remaining excess energy. When tested with multiple 6,000V/3,000A surges, the SMP circuit’s maximum
let-through voltage is only 376V Pk / 266V RMS on a 230V line. Due to the design of the circuit, it will not degrade over time (unlike most standard
surge suppressors) and show minimal increase in line impedance (unlike many advanced surge suppressors).
The SMP circuit is not simply designed to protect from a catastrophic surge, such as a lightning strike - it is engineered to provide maximum
life to connected equipment. This means it not only protects from devastating spikes and surges, but also offers protection from the dozens to
hundreds of small spikes and surges your equipment is exposed to on a daily basis. These common voltage fluctuations, although small, can have
a serious adverse effect over the long-term. Even when protected by a standard surge protector, digital circuits can see long-term damage due
to exposure of voltage on the ground line, causing intermittent behavior, equipment lock-ups, and data loss. By absorbing these everyday surges
without deterioration of the circuit or contamination of the ground line, Furman’s SMP maximizes the longevity of connected equipment and
minimizes the risk of downtime or failure in mission-critical applications.
www.furmansound.com 1
220V-240V PRO LINE PRODUCT CATALOG
EXTREME VOLTAGE SHUTDOWN (EVS)
Transient spikes and ground contamination are not the only
problems faced by today’s sensitive electronics. There are
also sustained over voltage conditions, sometimes called extreme voltages. Many
surge suppression devices will not be able to protect equipment from sustained over
voltages. These conditions can occur for multiple reasons: wiring faults, storms and
traffic accidents, and accidental connections can result in delivery of over 400V to
your connected equipment. Many surge suppression devices are not equipped to
handle these kind of conditions. Without proper protection, the end result is destroyed
equipment, or at best, a destroyed surge suppression system.
Standard power strips are not equipped to
handle sustained overvoltage conditions.
Furman’s EVS constantly monitors incoming voltage, and once any overvoltage
condition over 275 volts AC is detected, a relay opens which immediately shuts down the unit and all connected equipment. An indicator light
informs the user there is a problem, and once the condition has been corrected, the unit may be reset and will operate normally.
LINEAR FILTERING TECHNOLOGY (LIFT)
While delivering your power, your AC tap also delivers a significant amount of line noise. This is due to many reasons:
the widening popularity of switching power supplies and the harmonics they backfeed into our AC power mains, the
deterioration of our power grid from age and use, and the noise pollution generated from the massive amounts of electronic devices on our
grid at any given time, among others. When this AC noise couples into critical circuits, it will distort and mask low-level signal information. This
information is vital to today’s high-performance, high-definition video and audio.
Furman’s LiFT employs a finely tuned low-pass filter to reduce the differential AC noise coming through your line. What is significant about
Furman’s filtering is that it reduces the AC noise in a linear fashion across a very wide bandwidth. Prior filtering schemes (such as those found in
most AC conditioners and in Furman’s own conditioners prior to developing LiFT) reduce noise unevenly, creating a noise attenuation curve that
resembles a roller coaster. This is akin to a poor job of equalizing a recording.
Real-Time AC Noise Filtering Analysis - Decibel Level vs. Frequency
Blue Line: Input AC, Green Line: Output AC (Post-Filter)
Output of real-time noise analysis software,
showing the noise attenuation curve of a standard
AC noise filter. Note the uneven shape of the
output curve (the green line).
Output of the same analysis using Furman’s Linear
Filtering Technology. As you can see, the output noise
attenuation curve is smooth and linear, without the
resonant peaking seen in the standard filter.
With Furman’s LiFT, differential AC noise is reduced linearly, across a very wide bandwidth, even extending into the video frequencies. This results
in a lower noise floor for your audio system, improved picture on your video display, and protection from possible data corruption and losses
caused by low-level differential AC noise fed into digital systems
2 www.furmansound.com
FURMAN TECHNOLOGY
TRUE RMS VOLTAGE REGULATION
Another power quality issue facing today’s electronics is irregular
voltage. While we may expect constant voltage to be supplied by our
power utility, such an expectation is not realistic. Because of the chaotic demands on many
power facilities and deterioration of power lines, AC voltage is often reduced so that it can
be stretched to fulfill excess demand. This creates a substantial negative impact on your A/V
equipment performance. Additionally, many regions and many applications require equipment
be run by generator power. Since generators typically have voltage output specifications based
on a constant current load, they are far from ideal for use in an A/V system which will typically
see massive swings in the current draw. For this reason, generator power should always be
followed by voltage regulation in an A/V application.
True RMS Voltage Regulation is achieved
through the use of an ultra-quiet,
microprocessor controlled autoformer with
solid-state switching
Today’s power supplies are designed to operate at their optimum input - anywhere between 120V to 240V, depending on the region. When the voltage
delivered is higher than the regional standard, your equipment is subject to extra electricity that can overheat or damage your equipment. When the
voltage is lower than optimal, your equipment’s power supply must work harder to create more electrical current in order to make up for the difference,
creating a “tug-of-war” in your power supply. This can cause your equipment to malfunction or sustain permanent damage.
Furman’s True RMS Voltage Regulation is designed around an ultra-low noise toroidal autoformer. A microprocessor within the regulator monitors
the incoming RMS voltage with each cycle, measuring the phase angle in time with the advancing cycle. Most commercial voltage regulators
using multiple-tapped transformers switch taps at uncontrolled times. This creates voltage spikes and clicks that can leak into audio. When a
voltage fluctuation requires correction, Furman’s True RMS Voltage Regulation advances a new tap with less stress than other technologies and,
in turn, avoids distortion to the AC waveform. Hysteresis in the circuitry avoids the unnecessary switching back and forth between the adjacent
taps (or “chatter”) found in many commercial voltage regulators. If necessary, Furman’s True RMS Voltage Regulation technology can switch taps
as often as once each cycle and do so with a shorter recovery time than a commercial voltage regulator. In addition and unlike voltage regulators
that employ ferroresonant transformers, Furman regulators are not sensitive to small errors in line frequency, making them ideal for use with
generators. The autoformer’s toroidal design assures minimal leakage of stray magnetic fields.
POWER SEQUENCING
Power sequencing is useful whenever various kinds of equipment must be powered up or down in groups, rather than
all simultaneously. In audio systems, sequenced powering is often necessary to allow turn-on transients from low level
amplifiers and processors to settle down before any power amps are turned on, because simultaneous powering would result in a loud, annoying, and potentially destructive “pop” reaching the speakers. And in any large system whose components present an inductive load to the AC line
(including electric motors, power supplies, and power amplifiers of all kinds), sequenced powering can avoid excessive inrush currents that can
cause circuit breakers to trip even though the steady-state currents are not excessive. Power sequencing is particularly suited to applications
where large installations must be switched by inexperienced personnel.
ISOLATED OUTLET BANKS
Isolation of rear panel outlet banks provides further noise reduction at the point of use by eliminating electrical crosstalk, which can be particularly troublesome when analog and digital equipment is plugged into the same circuit.
FRONT PANEL RETRACTABLE LIGHTS
Furman’s signature front panel retractable lights provide convenient, discreet illumination to a rack full of equipment.
Standard models include incandescent lights. Advanced models feature long-lasting, cool running LED lights.
www.furmansound.com 3
220V-240V PRO LINE PRODUCT CATALOG
DIAGNOSTIC LIGHTS
Diagnostic lights provide information regarding power quality and operational status of the Furman unit, including Protection OK indicator, Extreme Voltage indicator, and color-coded Voltage Range indicator (on select models).
LED VOLTMETER
Segmented LED Voltage Meter. Indicates incoming voltage ranging from 180V to 254V. The LED’s are color coded
(Red=Stop, Yellow=Caution, Green=Go) to inform users at a glance if voltage is within a nominal range.
DIGITAL VOLTMETER
Laboratory-precision Digital Voltmeter displays incoming voltage.
DIGITAL VOLTMETER/AMMETER
Switchable, dimmable digital meter displays incoming voltage, switchable to output current in amps. Display also
features Protection OK, Extreme Voltage, and color-coded Voltage Range indicators for comprehensive power monitoring.
USB CHARGER
Front-panel USB charger provides convenient charging outlet for most personal media devices and cell phones.
REAR PANEL BNC CONNECTOR
Rear-panel BNC Connector allows connection of BNC gooseneck lamp for rear rack illumination.
STANDARD LEVEL SURGE PROTECTION
Standard level, MOV-based sacrificial surge protection.
STANDARD LEVEL EMI/RFI FILTRATION
Standard level non-linear AC noise filtration.
4 www.furmansound.com
FURMAN TECHNOLOGY/POWER CONDITIONERS
MERIT X SERIES POWER CONDITIONERS
Furman’s most affordable rackmount power conditioners feature eleven total outlets, standard level surge suppression, standard level EMI/RFI
filtration, and a robust steel chassis.
M-10x E 10A Power Conditioner
Standard Level
Standard Level
Surge Protection RFI/EMI Filtration
11 Outlets
10A Rating
Protection OK
Indicator
M-10Lx E 10A Power Conditioner
Standard Level
Standard Level
Surge Protection RFI/EMI Filtration
11 Outlets
10A Rating
Protection OK
Indicator
Front Panel
Retractable Lights
REAR PANEL (BOTH MODELS)
Merit X Series Specifications: Maximum Output Current:10 Amps. Line Cord: 1.5 meter, removable, IEC C-13 female to Schuko male. Lamps (M-10Lx E): Two multi-LED, dimmable lamps. Spike Protection Mode:
Fused MOV, Line to neutral. Operating Voltage: 230VAC 50 Hz. Energy Dissipation: 305 joules. Peak Impulse Current: 12,000 amps. Noise Attenuation (Transverse Mode): Greater than 20dB, 1.5Mhz to 200
Mhz. Dimensions: 44.45mm H x 482.6mm W x 190.5mm D. Weight: 2.3 kg. Safety Agency: CE. Warranty: Three Year.
www.furmansound.com 5
220V-240V PRO LINE PRODUCT CATALOG
CLASSIC SERIES POWER CONDITIONERS
An update to Furman’s popular Series II line, all Classic Series models feature advanced features such as SMP Surge Protection, EVS Voltage
Protection, Linear Filtering Technology, pull-out LED lights, and isolated rear panel outlet banks.
PL-8C E 10A Advanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
11 Outlets
10A Rating
Diagnostic Lights
Isolated Outlet
Banks
Front Panel
Retractable Lights
Rear Panel BNC
Connector for
Gooseneck Lamp
PL-PLUS C E 10A Advanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
11 Outlets
10A Rating
Diagnostic Lights
Isolated Outlet
Banks
Front Panel
Retractable Lights
LED Voltmeter
Rear Panel BNC
Connector for
Gooseneck Lamp
REAR PANEL (BOTH MODELS)
Classic Series (10A) Specifications: Maximum Output Current:10 Amps. Line Cord: 2.5M, removable, IEC female to Schuko male. Lamps: Two multi-LED dimmable lamps. Spike Protection Mode: SMP, Line to
neutral, zero ground leakage. Maximum Continuous Operating Voltage: 274V. Let Through Voltage: 376V Pk / 266V RMS @ 3,000 Amps. Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100
kHz, 50 dB @ 500 kHz. BNC Connector: 12VAC 500MA max (lamp not included). Dimensions: 482.6mm W x 266.7mm D x 44.45mm H Weight: 6 kg. Safety Agency: CE. Warranty: Five Year.
6 www.furmansound.com
POWER CONDITIONERS
CLASSIC SERIES POWER CONDITIONERS (PRO MODEL)
Furman’s Classic Series PL-PRO DMC E provides additional features such as a higher current capacity (16A), USB front panel charger, and dual
digital voltmeter/ammeter with color-coded “Voltage Range” indicator.
PL-PRO DMC E 16A Advanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
11 Outlets
16A Rating
Diagnostic Lights
Isolated Outlet
Banks
Dual Voltage/
Current Meter
USB Charger
Front Panel
Retractable Lights
Rear Panel BNC
Connector for
Gooseneck Lamp
Classic Series (16A) Specifications: Maximum Output Current:16 Amps. Line Cord: 2.5M, removable, IEC female to Schuko male. Lamps: Two multi-LED dimmable lamps. Spike Protection Mode: SMP, Line to
neutral, zero ground leakage. Maximum Continuous Operating Voltage: 274V. Let Through Voltage: 376V Pk / 266V RMS @ 3,000 Amps. Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100
kHz, 50 dB @ 500 kHz. BNC Connector: 12VAC 500MA max (lamp not included). USB Circuit: 500 mA@5VDC, USB-A Connector. Dimensions: 482.6mm W x 266.7mm D x 44.45mm H Weight: 6 kg. Safety Agency: CE.
Warranty: Five Year.
COMPACT POWER CONDITIONER
Ideal for flat panel televisions, video projectors, or anywhere advanced power conditioning is needed for components away from the main
equipment rack, The AC-210E provides advanced protection and filtration in a compact, 44.5mm H x 127mm W x 216mm D chassis.
AC-210E 10A Compact Advanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
2 Outlets
10A Rating
Diagnostic Lights
AC-210E Specifications: Maximum Output Current:10 Amps. Line Cord: 2.5M, removable, IEC female to Schuko male. Spike Protection Mode: SMP, line to neutral, zero ground leakage. Maximum Continuous
Operating Voltage: 274V. Let Through Voltage: 376V Pk / 266V RMS @ 3,000 Amps. Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. Dimensions: 44.5mm H x 127mm W x
216mm D. Weight: 1.36 kg. Safety Agency: CE. Warranty: Three Year.
www.furmansound.com 7
220V-240V PRO LINE PRODUCT CATALOG
PRESTIGE SERIES VOLTAGE REGULATOR/POWER CONDITIONERS
Furman’s Advanced Voltage Regulators/Power Conditioners provide consistent voltage (selectable between 230V and 240V, ±10V) output while
also offering all of the advanced protection and noise filtering benefits of Furman’s advanced power conditioning technologies.
P-1400 AR E 6A Advanced Voltage Regulator/Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
True RMS Voltage
Regulation
11 Outlets
6A Rating
Diagnostic Lights
USB Charger
Isolated Outlet
Banks
Dual Voltage/
Current Meter
Rear Panel BNC
Connector for
Gooseneck Lamp
P-1400 AR E Specifications: Maximum Output Current: 6 Amps. Output Voltage: Selectable between 230V and 240V, ±10V. In Regulation Range: 174 to 264 VAC. Line Cord: 2.5M, removable, IEC female
to Schuko male. Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 275V. Let Through Voltage: 376V Pk / 266V RMS @ 3,000 Amps. Noise
Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. USB Circuit: 500 mA@5VDC, USB-A Connector. BNC Connector: 12VAC 500MA max (lamp not included). Dimensions: 482.6mm
W x 305mm D x 45mm H Weight: 7 kg. Safety Agency: CE. Warranty: Five Year.
P-6900 AR E 30A Advanced Voltage Regulator/Power Conditioner (Available Q2 2009)
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
True RMS Voltage
Regulation
11 Outlets
30A Rating
Diagnostic Lights
USB Charger
Isolated Outlet
Banks
Dual Voltage/
Current Meter
P-6900 AR E Specifications (Note - Preliminary Specifications, subject to change): Maximum Output Current: 30 Amps. Output Voltage: Selectable between 230V and 240V, ±10V. In Regulation Range: 174
to 264 VAC. Line Cord: 30A C-Form connector with female mating connector for termination of custom line cord. Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Continuous
Operating Voltage: 275V. Let Through Voltage: 376V Pk / 266V RMS @ 3,000 Amps. Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. USB Circuit: 500 mA@5VDC,
USB-A Connector. Dimensions: 482.6mm W x 406.4mm D x 133.35mm H (without line cord connector), 482.6mm W x 597mm D x 133.35mm H (with line cord connector). Weight: 26 kg. Warranty: Five Year.
8 www.furmansound.com
VOLTAGE REGULATORS/POWER SEQUENCERS/GOOSENECK LAMPS
POWER SEQUENCERS/CONDITIONERS
Furman’s rackmount Power Sequencers/Conditioners provide solutions for control of system start-up and shut-down along with advanced power
protection and filtration.
PS-8R E II 10A Advanced Power Sequencer/Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
Power Sequencing
9 Outlets
10A Rating
Diagnostic Lights
Isolated Outlet
Banks
Rear Panel BNC
Connector for
Gooseneck Lamp
PS-8R E II Specifications: Maximum Output Current: 10 Amps. Delay Banks: 3 banks, adjustable delay, local or remote control. Line Cord: 2.5M, removable, IEC female to Schuko male. Spike Protection Mode: SMP,
Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 274V. Let Through Voltage: 376V Pk / 266V RMS @ 3,000 Amps. Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @
100 kHz, 50 dB @ 500 kHz. BNC Connector: 12VAC 500MA max (lamp not included). Dimensions: 482.6mm W x 266.7mm D x 44.45mm H Weight: 5 kg. Safety Agency: CE. Warranty: Thee Year.
PS-PRO E II 16A Advanced Power Sequencer/Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
Power Sequencing
9 Outlets
20A Rating
Diagnostic Lights
Isolated Outlet
Banks
Rear Panel BNC
Connector for
Gooseneck Lamp
PS-PRO E II Specifications: Maximum Output Current: 16 Amps. Delay Banks: 3 banks, adjustable delay, local or remote control. Line Cord: 2.5M, removable, IEC female to Schuko male. Spike Protection Mode: SMP,
Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 274V. Let Through Voltage: 376V Pk / 266V RMS @ 3,000 Amps. Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @
100 kHz, 50 dB @ 500 kHz. BNC Connector: 12VAC 500MA max (lamp not included). Dimensions: 482.6mm W x 266.7mm D x 44.45mm H Weight: 5 kg. Safety Agency: CE. Warranty: Thee Year.
GOOSENECK LAMPS
GN-I / GN - LED Gooseneck Lamps
Furman’s 12” gooseneck lamps provide incandescent (GN-I) and LED (GN-LED) illumination with a
locking BNC connector, ideal for use with many Furman products that provide a rear BNC connector
for discreet illumination at the back of an equipment rack.
www.furmansound.com 9
220V-240V PRO LINE PRODUCT CATALOG
GLOBAL COMPATIBILITY
Furman products are engineered to be universally compatible with the many regional power requirements around the globe. All 220V-240V
Furman power management products feature IEC outlets for maximum convenience and flexibility in installation. Furman offers a wide variety
of adaptor cords to provide connection solutions for all global applications.
IEC ADAPTOR CORDS
ADP-10E1 (1 meter long)
To plug components with removable 10A IEC cords into Furman products with 10A IEC outlets.
10A Male IEC to 10A Female IEC.
ADP-10E2 (2 meters long)
To plug components with removable 10A IEC cords into Furman products with 10A IEC outlets.
10A Male IEC to 10A Female IEC.
ADP-16E2 (1 meter long)
To plug components with removable 16A IEC cords into Furman products with 16A IEC outlets.
16A Male IEC to 16A Female IEC.
WESTERN EUROPE (SCHUKO)
ADP-IEC EURO (0.1 meter long)
To plug components with European SCHUKO plugs into Furman products with 10A IEC outlets.
10A Male IEC to Female SCHUKO.
SCHUKO-10 (2.5 meters long)
For use with 10A Furman products with removable IEC power cord.
10A IEC Female to SCHUKO Male.
SCHUKO-16 (2.5 meters long)
For use with 10A Furman products with removable IEC power cord.
16A IEC Female to SCHUKO Male.
10 www.furmansound.com
GLOBAL COMPATIBILITY
UNITED KINGDOM (UK)
ADP-IEC UK (0.1 meter long)
To plug components with UK plugs into Furman products with 10A IEC outlets.
10A Male IEC to Female UK.
UK-10 (2.5 meters long)
For use with 10A Furman products with removable IEC power cord.
10A IEC Female to 10A UK Male.
UK-16 (2.5 meters long)
For use with 10A Furman products with removable IEC power cord.
16A IEC Female to 16A UK Male.
AUSTRALIA/NEW ZEALAND (AUS)
ADP-AUS (0.1 meter long)
To plug components with Australian plugs into Furman products with 10A IEC outlets.
10A Male IEC to Female Australian.
AUS-10 (2.5 meters long)
For use with 10A Furman products with removable IEC power cord.
10A IEC Female to Australian Male.
AUS-16 (2.5 meters long)
For use with 16A Furman products with removable IEC power cord.
15A IEC Female to Australian Male.
www.furmansound.com 11
220V-240V PRO LINE PRODUCT CATALOG
GLOBAL MAINS VOLTAGE BY COUNTRY
Afghanistan
240 V
220 V
220 V
Central African
Republic
Greece
230 V
Albania
230 V
Chad
220 V
Greenland
220 V
American Samoa
120 V
Channel Islands
230 V
Grenada
230 V
Andorra
230 V
Chile
220 V
Guadeloupe
230 V
Guam
110 V
Angola
220 V
China
110 V
Colombia
220 V
Guatemala
120 V
120 V
Antigua
230 V
Comoros
220 V
Guinea
220 V
Argentina
220 V
Congo-Brazzaville
230 V
Guinea-Bissau
220 V
Guyana
240 V
Armenia
220 V
Congo-Kinshasa
127 V
Cook Islands
220 V
Haiti
110 V
240 V
Honduras
110 V
230 V
Costa Rica
120 V
Australia
Austria
Hong Kong
220 V
230 V
Côte d’Ivoire
230 V
Hungary
230 V
Azerbaijan
220 V
Croatia
230 V
Iceland
230 V
220 V
Cuba
110 V
India
230 V
Bahamas
120 V
Cyprus
240 V
Indonesia
127 V/230 V
Bahrain
230 V
Czech Republic
230 V
Iran
220 V
Balearic Islands
220 V
Denmark
230 V
Iraq
230 V
220 V
Djibouti
220 V
Ireland
230 V
Barbados
115 V
Dominica
230 V
Isle of Man
240 V
Belarus
220 V
Dominican Republic
110 V
Israel
230 V
Belgium
230 V
East Timor
220 V
Italy
230 V
110 V/220 V
Ecuador
120 V
Jamaica
110 V
Benin
220 V
Egypt
220 V
Japan
100 V
Bermuda
120 V
El Salvador
115 V
Jordan
230 V
Bhutan
230 V
Equatorial Guinea
220 V
Kazakhstan
220 V
220 V
Eritrea
230 V
Kenya
240 V
Bonaire
127 V
Estonia
230 V
Kiribati
240 V
Bosnia
220 V
Ethiopia
220 V
Korea, North
220 V
Botswana
231 V
Faroe Islands
220 V
Korea, South
220 V
127 V/220 V
Falkland Islands
240 V
Kuwait
240 V
Brunei
240 V
Fiji
240 V
Kyrgyzstan
220 V
Bulgaria
230 V
Finland
230 V
Laos
230 V
Burkina Faso
220 V
France
230 V
Latvia
220 V
220 V
French Guiana
220 V
Lebanon
110 V/200 V
Cambodia
230 V
Gaza Strip
230 V
Lesotho
220 V
Cameroon
220 V
Gabon
220 V
Liberia
120/240 V
Canada
120 V
Gambia
230 V
Libya
127 V
220 V
Germany
230 V
Lithuania
230 V
Cape Verde
220 V
Ghana
230 V
Liechtenstein
230 V
Cayman Islands
120 V
Gibraltar
240 V
Luxembourg
230 V
Algeria
Anguilla
Aruba
Azores
Bangladesh
Belize
Bolivia
Brazil
Burundi
Canary Islands
12 www.furmansound.com
Macau S.A.R. of
China
220 V
Macedonia
220 V
Madagascar
Puerto Rico
120 V
120 V
240 V
United States of
America
Qatar
Réunion
220 V
Uruguay
230 V
127 V / 220 V
Romania
230 V
Uzbekistan
220 V
Madeira
220 V
Russian Federation
220 V
Vanuatu
230 V
Malawi
230 V
Rwanda
230 V
Venezuela
120 V
Malaysia
240 V
St. Kitts and Nevis
110/230 V
Vietnam
220 V
Maldives
230 V
St. Lucia
240 V
Virgin Islands
110 V
Mali
220 V
St. Vincent
230 V
Western Samoa
230 V
Malta
230 V
Yemen
230 V
220 V
São Tomé and
Príncipe
220 V
Martinique
Zambia
230 V
Mauritania
220 V
Saudi Arabia
127 V/220 V
Zimbabwe
220 V
Mauritius
230 V
Senegal
230 V
Mexico
120 V
Serbia
220 V
Micronesia
120 V
Seychelles
240 V
Moldova
220-230 V
Sierra Leone
230 V
Monaco
127 V/220 V
Singapore
230 V
Mongolia
230 V
Slovakia
230 V
Montenegro
220 V
Slovenia
230 V
Montserrat
230 V
Somalia
220 V
Morocco
127 V/220 V
South Africa
220 V
Mozambique
220 V
Spain
230 V
Myanmar/Burma
230 V
Sri Lanka
230 V
Namibia
220 V
Sudan
230 V
Nauru
240 V
Suriname
127 V
Nepal
230 V
Swaziland
230 V
Netherlands
230 V
Sweden
230 V
Netherlands Antilles
127 V/220 V
Switzerland
230 V
New Caledonia
220 V
Syria
220 V
New Zealand
230 V
Tahiti
110 V/220 V
Nicaragua
120 V
Taiwan
110 V/220 V
Niger
220 V
Tajikistan
220 V
Nigeria
240 V
Tanzania
230 V
Norway
230 V
Thailand
220 V
Okinawa
100 V
Togo
220 V
Oman
240 V
Tonga
240 V
Pakistan
230 V
Trinidad & Tobago
115 V
Panama
110 V
Tunisia
230 V
Papua New Guinea
240 V
Turkey
230 V
Paraguay
220 V
Turkmenistan
220 V
Peru
220 V
Uganda
240 V
Philippines
220 V
Ukraine
220 V
Poland
230 V
United Arab Emirates
220 V
Portugal
220 V
United Kingdom
230 V
www.furmansound.com 13
220V-240V PRO LINE PRODUCT CATALOG
All 220V-240V Furman products are 100% RoHS Compliant.
All content © 2009 Panamax, Inc. All Rights Reserved. L1P101-1/09
14 www.furmansound.com
Download PDF