Cres Cor 1000-CH-SS Operating instructions

Ovens
FL-2340-D
Rev. 0 (5/13)
Page 1 of 12
5925 Heisley Road • Mentor, OH 44060-1833
INSTALLATION, OPERATION and MAINTENANCE
MANUAL for Cres Cor
RADIANT OVENS
1000-CH-SS-SPLIT-D
1000-CH-AL-SPLIT-D
1000-CH-SS-SPLIT-D120
1000-CH-SS-D
1000-CH-AL-D
Models: 1000-CH-D SERIES
Cabinet model number:
Cabinet serial number:
Authorized Service Agency:
Ph:
Fax:
Keep this manual for future reference.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 2 of 12
5925 Heisley Road • Mentor, OH 44060-1833
TABLE OF CONTENTS
SUBJECTPAGE
INSTALLATION INSTRUCTIONS....................................................................................... 3, 4
OPERATING INSTRUCTIONS............................................................................................. 5, 6
Illustration, Control Panel............................................................................................. 5, 6
MAINTENANCE INSTRUCTIONS
How to Clean the Unit................................................................................................... 7
Trouble Shooting Guide................................................................................................ 8
Replacement Parts......................................................................................................... 9
Illustration; Ovens......................................................................................................... 9
Wiring Diagram for 1000-CH-SS or 1000-CH-AL....................................................... 11, 12
Wiring Diagram for 1000-CH-SPLIT........................................................................... 13
SERVICE POLICY and AGENCY LIST.......................................................................... FL-1400
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE
PERSONNEL ONLY
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
5925 Heisley Road • Mentor, OH 44060-1833
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 3 of 12
INSTALLATION INSTRUCTIONS
VENTING YOUR OVEN:
1. The purpose of ventilating hoods is to direct and
capture smoke, grease-laden vapors, heat, odors, or
fumes.
2. Low temperature equipment (maximum
temperature 250°F/121°C) does not produce heat,
odors, fumes, grease-laden vapors or smoke and is
not required to be vented.
3. Most jurisdictions consider our low-temperature
ovens (maximum temperature is 350°F/177°C) as
low-heat appliances not requiring vent hoods.
4. Installation must conform with local codes. The
authority having jurisdiction of enforcement of
the codes will have the responsibility for making
interpretations of the rules.
SPECIFICATIONS: All units are rated 3000 watts.
CMP MODEL NOS.
ELECTRICAL SPECS
(AC SERVICE)
ELEC. LOAD
POWER SUPPLY REQUIREMENT
SINGLE OVENS
Volts
Ph
Hz.
Amps
Volts
Amps
Ph
Wire
Volts
NEMA
1000CHSSSPLITD
1000CHALSPLITD
208
240
1
1
60
60
14
13
208
240
20
20
1
1
2
2
208
240
6-20P
6-20P
1000CHSSSPLITD3
1000CHALSPLITD3
208
240
3
3
60
60
8
7
208
240
20
20
3
3
3
3
208
240
L15-20P
L15-20P
SPECIFICATIONS: All units are rated 6000 watts. *For USA Only - Canadian is 6-50P
CMP MODEL NOS.
ELECTRICAL SPECS
(AC SERVICE)
ELEC. LOAD
POWER SUPPLY REQUIREMENT
DOUBLE OVENS
Volts
Ph
Hz.
Amps
Volts
Amps
Ph
Wire
Volts
NEMA
1000CHSSD
1000CHSS2D
1000CHALD
208
240
1
1
60
60
29
25
208
240
30
30
1
1
2
2
208
240
*6-30P
*6-30P
1000CHSSD3
1000CHSS2D3
1000CHALD3
208
240
3
3
60
60
16
14
208
240
20
20
3
3
3
3
208
240
L15-20P
L15-20P
SPECIFICATIONS: All units are rated 2000 watts.
CMP MODEL NOS.
ELECTRICAL SPECS
(AC SERVICE)
ELEC. LOAD
POWER SUPPLY REQUIREMENT
SINGLE OVENS
Volts
Ph
Hz.
Amps
Volts
Amps
Ph
Wire
Volts
NEMA
1000CHSSSPLITD120
120
1
60
16.6
120
20
1
2
120
5-20P
Model number “AL” is aluminum outer body with stainless steel doors and interior.
All models designed for AC Service. Model number may include a variety of informational suffix letters.
NOTE: OVENS NEED TO BE INSTALLED BY A
QUALIFIED PERSON.
For models rated at 2/08/240 Volts:
Check the voltage selector switch which is under an access
cover on the back of the oven near the power cord.
 Flip the switch “UP” for 208 Volts
 Flip the switch “DOWN” for 240 Volts
MAKE SURE THE SWITCH POSITION MATCHES
YOUR POWER SOURCE.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 4 of 12
5925 Heisley Road • Mentor, OH 44060-1833
INSTALLATION INSTRUCTIONS (continued)
IDENTIFYING YOUR CABINET:
Look for this label on the back of your cabinet. This information is needed when calling for questions or service.
R
5925 HEISLEY RD. MENTOR, OHIO 44060
C
US
PL
E
MOD. 1000CH
R
SER. FAA-K5645C-001
Hz.
60
AMPS
29
M
R
208/240
3000
SA
VOLTS
WATTS
PH.
1
COMMERCIAL COOKING APPLIANCE
MADE IN USA
UPPER RIGHT CABINET CORNER
HOW TO INSTALL CABINETS:
1. Remove all packing material from the inside and all
vinyl from the outside of oven.
2. Place the oven in a well ventilated area on level floor.
Clearance requirements: 3” (76mm) at the back, 2”
(51mm) at the top, 1” (25mm) at both sides.
3. Install the pan slide racks on the sidewalls, if necessary.
4. Slide drip pan(s) onto the bottom of the compartment(s).
All models are rated at 208/240 Volts.
CSA certified to UL 197 Rev. 9
FOR FIRST-TIME OPERATION ONLY:
A new oven needs to “burn off” factory oils and glue before
it’s first use. Do NOT load food into oven until this has
been done!
1. Push switch to “ON”; the light will come on.
NOTE: The letters “LOTPR” (low temperature) will show
on the control panel until it reaches 140°F (60°C).
2. Press the “COOK” button.
3. Push down and turn the control knob to show 200°F.
Push the knob again to set the temperature. Run the unit
for one (1) hour.
4. Turn the unit off and let cool.
5. Wipe the inside clean with detergent and hot water.
HOW TO REVERSE THE DOOR OPENINGS, IF
NEEDED:
1. Unscrew and remove the latch from the door and
magnetic strike from the cabinet.
2. Unscrew the hinges from the cabinet body and remove
door.
3. Remove the screws plugging the mating hinge, latch
and strike holes on the opposite sides of the cabinet
body and door.
4. Re-mount the hinges to the opposite side of the cabinet
and door.
5. Remount the latch and strike to the opposite side
DOOR VENT ADJUSTMENT:
Open the door(s) and move the vent tabs on the
inner door(s) as needed to release humidity.
WARNING
Air is VERY HOT when door is opened.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
5925 Heisley Road • Mentor, OH 44060-1833
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 5 of 12
OPERATING INSTRUCTIONS
HOW TO USE THE COOK-N-HOLD CONTROL:
*Push the lighted switch on the control panel; the light will
come on and the cabinet will start heating.
*The display will read “LOTPR” (low temperature) below
140°F. (60°C.).
NOTE: Wait one (1) hour after start up before loading the
food for best results.
The display will read “PREHT” until the cabinet reaches
the set temperature, then it will show “READY”.
Cooking:
1. Press the COOK button.
2. Turn the control knob to the desired cooking
temperature between 200°F (93°C) and 350°F (176°C).
3. Push the knob to set the temperature.
4. The control automatically goes to the HOLD mode.
(Continue to step 1 below).
Holding:
(Press the HOLD button only if you are just holding food),
1. Turn the control knob to the desired holding temperature
between 140°F (60°C) and 220°F (104°C).
2. Push the knob to set the temperature.
3. The control automatically goes to the TIME mode.
Setting the time or Food Probe:
1. If NOT using the Food Probe:
a) Turn the control knob to the desired hours/minutes.
b) Push the knob to set the time.
2. Using the Food Probe:
Plug in the food probe BEFORE you enter the TIME
mode. Otherwise, you have to press the PROBE button
to set the probe temperature.
a) Turn the knob to the desired temperature.
b) The timer will stop when the probe reaches the set
temperature.
3. Press the START button. The display will read
“PREHT” until the cabinet reaches the set temperature,
then it will show “READY”.
4. Press the START again to use this recipe (see Recipes”).
Note: Press the knob for 4 seconds to cancel the recipe.
The DISPLAY button shows (cycles through) all the values
when in each mode:
• “PREHEAT” OR “READY”: momentarily shows the
actual cabinet temperature.
• “COOK” (Timed): shows Home screen, set point,
count down time, actual cabinet temperature.
• “COOK” (Probe): shows Home screen, set point, count
up time, actual cabinet temperature.
• “HOLD”: shows Home screen, set point, count up
time, actual cabinet temperature.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
5925 Heisley Road • Mentor, OH 44060-1833
RECIPES:
The control can hold up to 18 saved recipes.
To save a recipe:
1. Press and hold both the TIME button and the knob for
5 seconds. The screen will be flashing. This is the setup
menu.
2. Turn the knob through the menu until you get to “Edit”.
3. Press the knob and turn to the recipe you want to edit.
There are 18 blank recipes to customize and save.
4. Press the knob and enter the cook, hold and time values.
5. After the entering the final value, “Edit” will show
again.
6. Press the knob to edit more recipes or turn to “End” to
exit the menu.
To use one of the recipes:
1. Push one of the three RECIPE group buttons for the
recipe number you want.
2. Turn the knob to the recipe you want and press the knob
to select.
3. Press the START button to preheat.
4. After it shows “READY”, press the START button
again to begin the recipe.
Note: The display button will cycle through all the values
as before, but will include the recipe number, if
using a saved recipe.
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 6 of 12
Quick Recipe Note:
You can set “Quick Recipes” for recipes that you use often.
This way, when you press a recipe group button and press
start, that recipe will start cooking without searching
for the recipe number. Recipe numbers can be set up as
“quick recipes” as follows:
1. Press and hold both the TIME button and the knob for 5
seconds to get into the menu.
2. Turn the knob to “RBTN” and press the knob. The word
“PUSH” will flash.
3. Press one of the recipe group buttons to assign a recipe.
Note: Recipe numbers 1-6 can be set up as Group button 1.
Recipe numbers 7-12 can be set up as Group button 2.
Recipe numbers 13-18 can be set up as Group button 3.
4. Turn the knob to the recipe number you want to assign
to that button and press the knob.
Repeat the process to assign recipes to the other two recipe
group buttons; or,
turn the knob to “END” the submenu; turn to “END” the
menu.
Additional Menu Settings:
Press and hold both the TIME button and the knob for 5
seconds to get into the menu.
Here you can set the recipes, quick recipes, temperature
units (°C or °F) and the datalog
settings (USB connection required):
”RECE” allows you to enable or disable the data record
feature.
“RECF” allows you set how often (in minutes) a
datapoint will be recorded.
“RECD” allows you to set how long (in days) you would
like the data to be stored in memory.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 7 of 12
5925 Heisley Road • Mentor, OH 44060-1833
HOW TO CLEAN THE UNIT:
WARNING
BEFORE cleaning the cabinet:
1.
2.
3.
4.
Unplug cord from wall. Allow cabinet to cool.
Do NOT hose cabinet with water.
Do NOT get water on controls.
Do NOT use abrasives or harsh chemicals.
Wipe up spills as soon as possible.
Clean regularly to avoid heavy dirt build-up.
Cleaning Hints:
1. Use the mildest cleaning procedure that will do the job.
2. Always rub in the direction of polish lines to avoid
scratching the surface.
3. Use only a soft cloth, sponge, fibrous brushes, plastic or
stainless steel pads for cleaning and scouring.
4. Rinse thoroughly with fresh water after every cleaning
operation.
5. Always wipe dry to avoid water marks.
MODELS: 1000-CH-SS-D & 1000-CH-SS-SPLIT-D
STAINLESS
STEEL
CABINET
Inside and
Outside
SOIL
CLEANER
METHOD
Routine Cleaning
Soap or mild detergent* and
water.
1. Sponge on with cloth
2. Rinse
Stubborn Spots, Stains
Mild abrasive made for
Stainless Steel.
1. Apply with damp sponge or cloth.
2. Rub lightly.
Burnt on Foods or Grease
Chemical oven cleaner made
for Stainless Steel.
Follow oven cleaner manufacturer’s
directions.
Hard Water Spots & Scale
Vinegar
1. Swab or wipe with cloth.
2. Rinse and dry.
MODELS: 1000-CH-AL-D & 1000-CH-AL-SPLIT-D (Aluminum cabinet outside only with stainless steel doors and pan slides)
SOIL
CLEANER
Mild detergent* and hot water,
or mild abrasive cleaner.
Dirt
ALUMINUM
CABINET
Outer body
ONLY
Fingerprints, Grease, Oil
Water Spots
METHOD
1. Use soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
Steam (no strong alkaline
additive).
1. Rinse after steam cleaning.
2. Wipe dry.
Detergent* and hot water.
1. Wipe with soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
Chemical oven cleaner made
for aluminum.
Follow oven cleaner manufacturer’s
directions
Mild abrasive cleaner.
Oily or waxy cleaner.
Apply with soft, clean cloth.
Mild abrasive cleaner.
Wipe with damp cloth.
*Mild detergents include soaps and non-abrasive cleaners.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
5925 Heisley Road • Mentor, OH 44060-1833
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 8 of 12
MAINTENANCE INSTRUCTIONS
TROUBLE-SHOOTING GUIDE
WARNING
IF UNIT GETS TOO HOT OR WON’T SHUT OFF, DISCONNECT
POWER AT BRANCH PANEL. DO NOT UNPLUG CORD!
If hot unit is NOT working, first check the following causes:
1. Cord is unplugged from wall outlet.
3. Switch(es) are turned off.
2. Circuit breaker/fuse to wall outlet is blown.
4. Thermostat(s) are turned off, or are set too low.
IF THE OVEN TURNS ON:
PROBLEM
POSSIBLE CAUSE
SOLUTION
Oven does not heat, or doesn’t heat
properly
1. Sensor
2. Heater relay
3. Loose connection
4. Oven control
5. High Limit
1. Replace
2. Replace
3. Replace
4. Replace
5. Replace
Heater will not shut off
1. Control defective
2. Heater relay
Vent fans do not shut off
1. Vent fan switch defective
2. Control compartment is still hot.
1. Replace
2. Replace
1. Replace
2. Wait until it cools
Check “Heater will not shut off”
Vent fans do not operate (See Note)
1. Vent fan switch defective
2. Vent fan defective
1. Replace
2. Replace
Control will not switch from “COOK” to
“HOLD” (timed mode)
1. Oven is in “PROBE” mode.
2. Oven control defective
1. Cancel recipe and switch to “TIMED” mode
2. Replace
Control will not switch from “COOK” to
“HOLD” (probe mode)
1. Oven is in the “TIMED” mode
2. Probe not plugged in
3. Probe defective
4. Oven control defective
1. Cancel recipe and switch to “PROBE” mode
2. Plug in probe
3. Replace
4. Replace
Control will not switch to “COOK” (probe
mode)
1. Oven in “TIMED” mode
2. Probe temperature setting lower
than probe temperature
3. Probe not plugged in
4. Oven control defective
1. Switch to “PROBE” mode
2. Set probe temperature to desired temperature
3. Plug in probe
4. Replace
CODE DISPLAYED
CAUSE
SOLUTION
no p
No meat probe
Plug in probe
Err0
Temp probe bad
Replace
ERROR CODES:
NOTE: Vent fans will not operate until the control compartment requires ventilation to limit temperatures. Replacement
of electrical components must be done by a qualified electrician.
Refer to our Service Agency list, FL-1400 (found in the back of this manual), of authorized service centers.
Instructions for replacing parts are included in replacement parts list.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 9 of 12
5925 Heisley Road • Mentor, OH 44060-1833
REPLACEMENT PARTS
Include all information on nameplate when ordering parts
7
8 9
24
23
27 28
4
3
2
22
5
1
6
26
INSULATION
18
14
11 12
12
29
SIDE PANEL
16
19
13
10
25
21
17
15
HEATER
WIRE COVER
Model 1000-CH-SS-D is shown.
Model 1000-CH-SPLIT-D is
half-size single door oven.
Call Toll-free: 877-CRES COR (273-7267)FL-2340D
• Fax: 800-822-0393
• www.crescor.com
1000CHSSSPLITD
5925 Heisley Road • Mentor, OH 44060-1833
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 10 of 12
REPLACEMENT PARTS
Include all information on nameplate when ordering parts
ITEM DESCRIPTION
1. Switch (On/Off)
2. Digital Control
3. Switch, Fan
4. Relay (1000-SPLIT-D)
Relay (1000-SS-D)
5. Terminal Block (Input)
6. Terminal Block
7. Switch, toggle (240V)
8. Vent Fan (240V)
Vent Fan (120V)
9. Fan Guard
10. Heater Kit 240V, 1325W
Heater Kit 120V, 1000W
11. Door Latch Kit
12. Latch Strike Kit
13. Door Assembly
14. Door Gasket
15. Door Hinge
16. Casters, Rigid
CMP Part No.
0808-125
0848-092-08-K
0848-034
0857-136
0857-134
0852-109
0852-091
0808-020
0769-174
0769-165
0769-167
0811-296-K
0811-295-K
1006-122-01-K
1006-122-02-K
1221-573-K
0861-267
0519-109
0569-306-R
ITEM DESCRIPTION
17. Casters w/Brake
18. Pan Slides
19. Drip Pan
20. Hi-Limit
21. Drip Tray
22. Wire Shelf
23. Power Cord (3000W, 1Ph)
Power Cord (6000W, 1Ph)
Power Cord (3000W, 3Ph)
Power Cord (6000W, 3Ph)
Power Cord (2000W, 1Ph)
24. Strain Relief
25. Clear Drip Pan
26. Transformer
27. Fuse (1000-SS-D)
28. Fuse Holder (1000-SS-D)
29. Strainer
Probe-Food 6”
Probe Connector
CMP Part No.
0569-306-B
0692-200
1017-115
0848-033
1017-111
1170-212
0810-173-01-K
0810-163-01-K
0810-164-02
0810-164-01
0810-065-1
0818-050
1017-058
0769-197
0807-150
0807-151
1052-094
0848-103
0848-106-02
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
18
N
L
N
L
Bottom
Power Switch
17
16
15
RED
13
GRAY
YELLOW
PURPLE
RED
GRAY
YELLOW
PURPLE
BOTTOM
Transformer
BLUE
WHITE
BROWN
BLACK
BLUE
WHITE
20 19
18
17
25
24
25
24
N
L
Power Switch
N
L
Top
23
22
31
30
K3 K1 K2
BOTTOM CABINET
LOOKING AT REAR
RENAU CONTROL
Bottom Control Compartment
Transformer
BLACK
BROWN
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
12
20
19
27
26
TOP
TRIAD
23
27
3A
30
31
26
3A
15
14
MEAT
PROBE
fuse
t°
21
fuse
22
bottom
heaters
top
heaters
11
29
AIR
PROBE
t°
5
K3 K1 K2
TOP CABINET
LOOKING AT REAR
RENAU CONTROL
16
14
TB1
TB2
TB3
3
4
35
2
HIGH TEMP
closes @130F
1
1
35
8
34
33
34
9
32
33
208V/240V Switch
32
28
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
10
28
29
t°
MEAT
PROBE
2
5
HIGH LIMIT
VENT
FAN
3
bottom cabinet
4
top cabinet
HIGH LIMIT
AIR
PROBE
VENT
FAN
t°
6
7
8
9
SSR BOTTOM
SSR TOP
12
13
10
11
POWER CORD
GROUND*
Page 11 of 12
TRIAD
Rev. 0 (5/13)
L1 T1
L1 T1
FL-2340-D
A2(-) A1(+)
A2(-) A1(+)
Ovens
5925 Heisley Road • Mentor, OH 44060-1833
WIRING DIAGRAM FOR 1000-CH-D SERIES
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
RED
PURPLE
POWER CORD
GROUND*
12
VAC
RED
BLUE
GRAY
YELLOW
GRAY
12
VAC YELLOW




TRIAD
HAMMOND
BLUE
BLACK
WHITE
BROWN
ORANGE
BLACK
WHITE
BROWN



208/240
VAC
208/240
VAC


VENT
FAN



VENT
FAN
TERMINAL
BLOCK
blue
brown
TERMINAL
BLOCK
blue
brown
 




HIGH TEMP
closes @130F




1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16




K3 K1 K2
AIR
LOOKING AT REAR
RENAU CONTROL




t°
TERMINAL
BLOCK
blue
brown
MEAT
PROBE
AIR
PROBE

HIGH LIMIT


t°



N
L




AIR HEATER
SOLID STATE RELAY
POWER
SWITCH
(rear view)
N
L
L1 T1
 


5925 Heisley Road • Mentor, OH 44060-1833
Ovens
FL-2340-D
Rev. 0 (5/13)
Page 12 of 12
WIRING DIAGRAM FOR
1000-CH-SS-SPLIT-D and 1000-CH-SS-SPLITD120
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
A2(-) A1(+)