Char-Broil | 415.16112010 | Product guide | Char-Broil 415.16112010 Product guide

PRODUCT
Sears
item
Sears
Mode|
GUIDE
No,
161 t2
No. 415.16112010
IMPORTANT: Fill out the product record information below.
Serial Number
See ratinglabel on grill for serialnumber.
Date Purchased
Forsupportandto registeryour
grill, pleasevisit us at
www.charbroil.com
If you havequestionsor need
assistanceduringassembly,
pleasecall 1-800-241-7548.
Estimated assembly time: 35-40 minutes
The following are trademarks registered by W.C. Bradley Co. in the U.S. Patent and Trademark Office: Caldera®; Charcoal2Go®; Char-Broil@; America's Legendary
Barbeque Company®; American Gourmet®; Bandera®; Brush Hawg®; CB 940®; Char-Diamonds@; Char-Broil Charcoal/Gas@; Everybody Grills@; Everybody
Outside®; FastStart®; Grill 2 Go®; Grill 2 Go® Express@; Grill Lovers@; Infrared Grilling That's All About U®; Keepers of the Flame®; New Braunfels Smoker
Company®; Patio Bistro®; Patio Caddie®; Patio Kitchen®; Pro-Sear@; RED®; Quantum@; Santa Fe@; Sear and Grill@; Sierra@; Signature Series@; Sure2Burn@;
The Big Easy@; Trentino@; U@; Wild West Tradition®; and the following marks:
,._i
®
AUT®-CL_AN'_
The following are trademarks of W.C. Bradley Co.: Advantage Series TM;Auto-Clean TM;Chef Tested TM; Commercial Series TM; Designer Series TM;; Diamond Flame TM;
Double ChefTM; Fireball TM;FirenzyTM ; FlavorMasterTM ;FrontAvenueTM; Grill 2 Go@AdvantageTM; Hog and Yard Bird TM;H20 SmokerTM; Infrared. Grilling's Juicy Little
SecretTM; Incredible Taste. Infallible ResultsTM; Infrared InsideTM; InsureTM; Let's Grill Something TogetherTM; Lev-AlertTM; LonghornTM; MagnetoTM; Precision
FlameTM; Quick2BurnTM; QuickSetTM; Ready When You AreTM; Season, Set, And SavorTM; Sizzle On The GrilITM; Signature SeriesTM; SureFireTM; The Minute
Grill TM ;TorchforkTM; Universal Grill PartsTM; You Bring the Party TM
TEC TM is a trademark of Tec Infrared Grills.
Protected underone or more of the following U.S. Patents: 5,421,3t9; 5,458,309;5,579,755; 5,996,573; 6,135,104;6,279,566; 6,33t,108; 6,484,900; 6,526,876;6,595,197; 6,640,799;6,640,803; 6,729,873; 6,739,473;6,749,424; 6,792,935;6,951,213; 7,047,590;
7,516,693;D364,535; D372,637; D373,701;D377,735; D383,035; D397,9t0; D405,643;D406,OO5;D406,OO9; D413,043;D413,229; D414,982; D415,388;D416,164; D4t6,441; D4t7,587; D417,588; D422,516; D423,274;D423,876; D428,303; D430,772;D435,396;
D436,004; [:)438,059;[:)438,060;D438A27; [:)439,11O; D442,505;D443,179; D443,354; D443A64; D447,384;D447,385; D447,909; D448,6t0; D448,614;D448,615; D448,616; D448,975; D449A92; D450,844; D451,759; D454,028; D454,03t; D455,205; D455,206;
D456,202; D456,222; D456,223;D457,789; D458,520; [:)458,760;D458,802; D459,088; D459,148D459,149; D459,161; D459,163;D459,586; [:)459,943;D460,3t2; D460,3t3; D460,3t8; D46t,359; D465,123; D465,693; D466,307; D466A39; D466,752; D473At4;
D474,371; D477A98; D477,50t; D477,504; D477,506; D477,746; D478A71; D478A72; D480,914; D491A10; D494,009; D494At3; D49&523; D500,359; D504,048; D530,098; D535,OOO;Canada:D97,504;D99,355; D102,037; D104,2OO;DtOS,377;2,315,567;
France:D010,231;DOt0,422;D010,590;D0t0,849; 1,089,646;South Korea:384,565; United Kingdom:2,099,402.OtherPatents Pending. @2009 W.C.Bradley Company
@2009 Char-Broil,LLC Columbus,GA 31902
Printed in China
Assembly instructions@ 2009
Model 463723310
10/23/09 • G305-001-210801
For Your Safety ....................................
2-3
Grilling Guide ......................................
4-7
Use and Care ....................................
8-13
If you smell gas:
1. Shut off gas to the appliance.
Limited Warranty ....................................
14
2. Extinguish any open flame.
Parts List ..........................................
15
3. Open lid.
Parts Diagram ......................................
16
Assembly .......................................
17-27
Troubleshooting ..................................
28-30
Registration Card ...................................
4. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department.
31
Safety Symbols
The symbols and boxes shown below explain what each heading
means. Read and follow all of the messages found throughout
the manual.
WARNING: Indicates an potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTioN
CAUTION: Indicatesa potentially hazardous situation or
unsafe practicewhich, if not avoided, may result in minor
or moderate injury,
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
1. Do not store or use gasoline or other
flammable liquids or vapors in the vicinity of
this or any other appliance.
2. An LP cylinder not connected for use shall not
be stored in the vicinity of this or any other
appliance.
CAUTION
For residential use only. Do not use for commercial
cooking.
CAUTIONRead and follow all safety statements, assembly
instructions, and use and care directions before attempting
to assemble and cook.
|NSTALLER/ASSEMBLER:
Leave this manual with consumer.
CONSUMER"
Keep this manual for future reference.
WARNING=
Failure to follow all manufacturer's instructions could result
in serious personal injury and/or property damage.
CAUTION:
Some parts may contain sharp edges - especially as noted
in the manual! Wear protective gloves if necessary.
CAUTION
CALIFORNIA
PROPOSITION
65
1.Combustionby-productsproducedwhenusing
this productcontainchemicalsknownto the Stateof
Californiato causecancer,birth defects,andother
reproductiveharm.
2.This productcontainschemicals,including lead
and lead compounds, known to the State of
California to cause cancer, birth defects or other
reproductive harm.
Wash your hands after handling this product.
Installation Safety Precautions
* Use grill, as purchased, only with LP (propane) gas and the
regulator/valve assembly supplied. If your grill is Dual Fuel ready,
a conversion kit must be purchased for use with natural gas.
, Grill installation must conform with local codes, or in their
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B 149.2, or the Standard for Recreational
Vehicles,ANSI A 119.2/NFPA1192, and CSA Z240 RV Series,
Recreational Vehicle Code, as applicable.
, All electrical accessories (such as rotisserie) must be
electrically grounded in accordance with local codes, or
National Electrical Code, ANSI/NFPA 70 or Canadian
Electrical Code, CSA C22.1. Keep any electrical cords and/or
fuel supply hoses away from any hot surfaces.
o This grill is safety certified for use in the United States and/or
Canada only. Do not modify for use in any other location.
Modification will result in a safety hazard.
Do not attempt to repair or alter the
hoseNalve/regulator for any "assumed" defect. Any
modification to this assembly will void your warranty
and create the risk of a gas leak and fire. Use only
authorized replacement parts supplied by
manufacturer.
Using pots larger than 6 quarts in capacity could
exceed weight limit of the
side burner shelf
or side shelf,
resulting in failure
of grill cart
components.
Temperature
First Time Use
Read your Assembly Manual and ensure the grill is put together
properly. Remove all Point-of-Purchase advertising material from
all grill surfaces before first use. We recommend operating your
grill on its highest setting for 15-20 minutes prior to your first use.
This aids in removing the oils used during manufacturing.
Lava Rock / Briquettes
This gas grill has been designed, engineered, and tested to be
used with flame tamers or heat distribution plates to provide
more even heating, improve the cleaning process, and reduce
flare-ups. The addition of after market lava rocks, charcoal, or
briquettes of any type will cause poor combustion and increase
The temperature gauge in the hood of your new grill measures
air temperature. The air temperature inside your grill will never
be as hot as the temperature at the cooking surface.
Note: Since 1995, all regulators (the part that attaches to the gas
tank to regulate the flow of gas) have included a safety feature
that restricts gas flow in the event of a gas leak. You can
inadvertently activate this safety feature without having a gas
leak. This typically occurs when you turn on the gas using the
grill control knob before you turn on the LP tank valve. If the gas
regulator safety feature activates, the grill will only reach
temperatures between 250°F and 300°F even with all burners on
the high setting.
the likelihood of a grease fire, and is not recommended. Using
briquettes, lava rock, or charcoal in this grill will void your
warranty. For extra smoke flavor, we recommend using a
smoker box with wood chips.
Regulator
Coupling Nut
If your grill is not getting hotter than 250°F to 300°F these
steps should be taken first to reset the gas regulator safety
device:
1. Open the grill lid.
2. Turn off all knobs on the control panel in front.
3. Turn off the tank knob.
4. Disconnect the regulator from the LP tank.
5. Wait 30 seconds.
6. Reconnect the regulator to the LP tank.
7. Slowly open the LP tank knob all the way. Do not put
excessive force on the valve at the full open position to avoid
damaging the valve.
8. Turn on the appropriate control knob and light the grill per the
instructions on the control panel.
An illustration of this process is included in this Product Guide.
See Troubleshooting section for additional information.
Pre-Heating Your Grill
Just like your home oven, your grill should be pre-heated to
provide optimum performance. Pre-heat the grill on high for 1015 minutes - longer if weather conditions require. Please refer to
the lighting instructions inside the Product Guide if you have
questions about how to light your grill. A match-light chain and
hole is provided for your convenience.
Outdoor
grillingisreallyquitesimple.You'llsucceed
with
burgers,
dogs,orsteaks
usually
onyourveryfirsttry.With
experience,
youwilllearnhowtoworkwithyourgrill,creating
moreimaginative
meals
allthetime.Thisknowledge
makes
up
theartofgrilling.Before
youstartgrilling,
organize
yourfood
according
tocooking
technique
andrequired
cooking
time,and
optimize
theuseofyourgrillingarea.
Rotisserie
Cooking
Rotisserie
cooking
isbestfor'round'
meat,suchaslargeroasts,
wholepoultry,
andpork.Itgenerally
requires
anaccessory
motor
andspitrodthatallows
themeattobeturned
ata constant
speed.Rotisserie
cooking
isbestdoneinfrontofa special
rotisserie
burner,
orutilizing
anindirect
cooking
burner
arrangement.
Apancanbeplaced
underneath
themeattocatch
grease
andfooddrippings,
andhelpsminimize
clean-up.
DirectCooking
Directcooking
involves
grilling
yourmeatdirectly
overhighheat.
Itis perfect
forsearing
steaks,
chops,
andothersmaller
pieces
of
meatandvegetables
thatquickly
maketheirwaytothetable.
IndirectCooking
Indirect
cooking
utilizes
selectburners
tocirculate
heat
throughout
thegrill,without
directcontact
between
themeatand
theflame.Themeatisplaced
overtheburnerthatis'off'.This
method
isgenerally
usedtoslowcooklargecutsofmeatand
poultry.
Apancanbeplaced
underneath
themeattocatch
grease
andfooddrippings,
andhelpsminimize
clean-up.
FoodSafety
Foodsafetyisa veryimportant
partofenjoying
theoutdoor
cooking
experience.
Tokeepfoodsafefromharmful
bacteria,
followthesefourbasicsteps:
Clean: Wash hands, utensils, and surfaces with hot soapy water
before and after handling raw meat.
Separate: Separate raw meats from ready-to-eat foods to avoid
cross contamination. Use a clean platter and utensils when
removing cooked foods.
Cook: Cook meat and poultry thoroughly to kill bacteria. Use a
thermometer to ensure proper internal food temperatures.
Chill: Refrigerate prepared foods and leftovers promptly.
Cooking
onyournewgrillisahands-on
experience,
anditis
recommended
toremain
outside
withyourgrillwhilecooking.
Grilling
canbeaffected
bymanyexternal
conditions.
Incold
weather,
youwillneedmoreheattoreachanidealcooking
temperature,
andgrillingmaytakelonger.Themeat'sinternal
temperature
andthickness
canalsoaffectcooking
times.Cold
andthickermeats
willtakelongertocook.
Wood Chips
For extra smoke flavor when grilling, try adding wood chips.
Soak the chips in water for approximately 30 minutes before
adding to a smoke box or pan. Place smoke box or pan on top of
the cooking grate above the flame. Turn grill on high until the
wood starts to smoke. Reduce heat to desired temperature for
cooking, and place food on cooking grate as desired. Close lid to
retain more smoke. Hardwood varieties that work particularly
well with grilled foods include Alder, Apple, Cherry, Grapevines,
Hickory, Mesquite, Oak, Rosemary and Sassafras.
InternalMeatTemperatures
Meatcooked
ona grilloftenbrowns
veryfastontheoutside.
Therefore,
usea meatthermometer
toensure
ithasreached
safeinternal
temperatures.
USDA
Recommended
Internal
Safe
Minimum
Temperatures
Beef, Veal, Lamb, Steaks,
Fish
Pork
& Roasts
145 ° F
145 ° F
160 ° F
Beef, Veal, Lamb Ground
160 ° F
Egg Dishes
160 ° F
Turkey, Chicken & Duck Whole,
Pieces & Ground
165 ° F
Skewers
Metal skewers should be flat, with long handles. Round skewers
allow food to roll when turned, so it may not cook as evenly. Use
metal skewers when cooking meat kabobs. Wooden skewers
should be soaked in water for an hour before use, and are best
used for quick cooking foods such as vegetables and fruits.
Please refer to the IJSDAfor complete, up-to-date information.
Our internal temperature chart is based on USDA standards for
meat doneness. Check it out at www.isitdone_gD2
Sauces
Sauces containing sugars and fats can cause flare-ups, and your
food may burn. In general, apply these sauces during the final
10 minutes of cooking. Keep in mind, use of excessive sauces
or glazes will also require extra cleaning afterwards.
Marinades and Rubs
To enhance the flavor of grilled foods, a liquid marinade or dry
rub can be used prior to cooking. Meat can be either soaked or
injected with liquid marinade up to 24 hours prior to grilling. Dry
rubs can be applied directly to the meat immediately before
grilling.
Utensils
Use tongs or a spatula to handle the food instead of a fork, and
don't turn the food too
often. Piercing the food
with a fork will release
juices that you want in
the meat, and may
cause flare-ups.
WhyClean?
We'veallheardthesaying,
'anounceofprevention
iswortha
pound
ofcure.'Thisisgreatadvice
whenitcomes
tokeeping
yourgrillclean.
RoutineCare
Periodic
cleaning
ofthisgrillisnecessary,
asgrillfirescanoccurwhengrease
and
fooddebriscollect
inthebottom
ofthegrill.
Aftereachuse,remove
anyremaining
foodparticles
fromthecooking
grateand
insideofthegrillusinga grillbrush.Do
thisafterthegrillhascooled
down,yetis
stillwarm.Itismucheasiertocleanfood
particles
whilewarmth
isstillpresent,
than
afterthefoodparticles
havecompletely
cooled
andhardened.
Thisgrillis not
designed
tobe'burned
off'byclosing
the
lidandturning
theburners
onHighforan
extended
time.Theexcessive
heat
generated
cancauseleftover
grease
to
catchfire,andcancausepermanent
damage
toyourgrill.
Cooking surfaces: If a bristle brush is used to clean any of the
grill cooking surfaces, ensure no loose bristles remain on cooking
surfaces prior to grilling. It is not recommended to clean cooking
surfaces while grill is hot.
Storing Your Grill
• Clean cooking grates.
• Store grill in dry location.
• When LP cylinder is connected to grill, store outdoors in a well
ventilated space and out of reach of children.
• Cover grill if stored outdoors. Choose from a variety of grill
covers offered by manufacturer.
• Store grill indoors ONLY if LP cylinder is turned off,
disconnected, and removed from grill. Never store LP cylinder
indoors.
• When removing grill from storage, follow the 'Cleaning the
Burner Assembly' instructions in the Use and Care section of
the Product Guide.
General
Cleaning
Plastic parts: Wash with warm soapy water and wipe dry. Do not
use abrasive cleaners, degreasers or a concentrated grill cleaner
on plastic parts. Damage to and failure of parts can result.
Porcelain surfaces: Because of glass-like composition, most
residue can be wiped away with baking soda/water solution or
glass cleaner. Use non-abrasive scouring powder for stubborn
stains.
Painted surfaces: Wash with mild detergent or non-abrasive
cleaner and warm water. Wipe dry with a soft non-abrasive cloth.
Stainless steel surfaces: Stainless steel can rust under certain
conditions. This can be caused by environmental conditions
such as chlorine or salt water, or improper
cleaning tools such as wire or steel
wool. It can also discolor due to heat,
chemicals, or grease build-up. To
maintain your grill's high quality
appearance, wash with mild detergent
and warm water, or use a stainless
steel grill cleaner. Baked-on grease
deposits may require the use of an
abrasive plastic cleaning pad. Use only
in direction of brushed finish to avoid
damage. Do not use abrasive pad on
areas with graphics.
Critters
Spiders like to make their homes in the venturi tubes of grills.
These must be inspected and cleaned regularly to ensure there
are no blockages. Refer to the Use and Care portion of this
Product Guide for complete information.
LP Cylinder
•The LP cylinder used with your grill must meet the
following requirements:
•Use LP cylinders only with these required measurements: 12"
(30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.)
capacity maximum.
• NEVER store a spare LP cylinder under or near
the appliance or in an enclosed area.
•LP cylinders must be constructed and marked in accordance
with specifications for LP cylinders of the U.S. Department of
Transportation (DOT) or for Canada, CAN/CSA-B339,
cylinders, spheres and tubes for transportation of dangerous
goods. Transport Canada (TC). See LP cylinder collar for
marking.
•LP cylinder valve must have:
•Type 1 outlet compatible with
regulator or grill.
•Safety relief valve.
•UL listed Overfill Protection
OPDHandWheel
Device (OPD). This OPD safety
feature is identified by a unique triangular hand wheel. Use
only LP cylinders equipped with this type of valve.
•LP cylinder must be arranged for vapor withdrawal and include
collar to protect LP cylinder valve. Always keep LP cylinders in
upright position during use, transit or storage.
• Never fill a cylinder beyond 80% full.
• An over filled or improperly stored cylinder is a
hazard due to possible gas release from the
safety relief valve. This could cause an intense
fire with risk of property damage, serious injury or
death.
If you see, smell or hear gas escaping,
immediately get away from the LP
cylindedappliance and call your fire department.
LP Cylinder Removal, Transport and Storage
•Turn OFF all control knobs and LP cylinder valve. Turn coupling
nut counterclockwise by hand only - do not use tools to
disconnect. Loosen cylinder screw beneath bottom shelf, then
lift LP cylinder up and out of cart. Install safety cap onto LP
cylinder valve. Always use cap and strap supplied with valve.
Failure to use safety cap as directed may result in serious
personal injury and/or property damage.
•Adisconnected LP cylinder in LPCylinder
storage or being transported
must have a safety cap installed (as shown).
Do not store an LP cylinder in enclosed spaces
such as a carport, garage, porch, covered
patio or other building. Never leave an LP cylinder
Safety
inside a vehicle which may become overheated
Cap
by the sun.
Retainer Strap
•Do not store an LP cylinder in an area where children play.
LP cylinder in upright position for vapor withdrawal
LP (Liquefied
Petroleum Gas)
•LP gas is nontoxic, odorless and colorless when produced. For
Your Safety, LP gas has been given an odor (similar to rotten
cabbage) so that it can be smelled.
•LP gas is highly flammable and may ignite unexpectedly when
mixed with air.
LP Cylinder Filling
•Use only licensed and experienced dealers.
•LP dealer must purge new cylinder before filling.
•Dealer should NEVER fill LP cylinder more than 80% of LP
cylinder volume. Volume of propane in cylinder will vary by
temperature.
•A frosty regulator indicates gas overfill. Immediately close LP
cylinder valve and call local LP gas dealer for assistance.
•Do not release liquid propane (LP) gas into the atmosphere.
This is a hazardous practice.
•To remove gas from LP cylinder, contact an LP dealer or call a
local fire department for assistance. Check the telephone
directory under "Gas Companies" for nearest certified LP
dealers.
LP Cylinder Exchange
Connecting Regulator to the LP Cylinder
•Many retailers that sell grills offer you the option of replacing
your empty LP cylinder through an exchange service. Use only
those reputable exchange companies that inspect, precision fill,
test and certify their cylinders. Exchange your cylinder only
for an OPD safety feature-equipped cylinder as described
in the "LP Cylinder" section of this manual.
1.LP cylinder must be properly secured onto grill. (Refer to
assembly section.)
•Always keep new and exchanged LP cylinders in upright
position during use, transit or storage.
2.Turn all control knobs to the OFF position.
3.TurnLP cylinder OFF by turning hand-wheel clockwise to a
full stop.
4.Remove the protective cap from LP cylinder valve. Always use
cap and strap supplied with valve.
•Leak test new and exchanged LP cylinders BEFORE
connecting to grill.
•Place dust cap on cylinder valve outlet whenever the cylinder is
not in use. Only install the type of dust cap on the cylinder valve
outlet that is provided with the cylinder valve. Other types of caps
or plugs may result in leakage of propane.
LP Cylinder Leak Test
For your safety
•Leak test must be repeated each time LP cylinder is exchanged
or refilled.
OPDHandWheel
j
Safety Relief Valve
•Do not smoke during leak test.
•Do not use an open flame to check for gas leaks.
•Grill must be leak tested outdoors in a well-ventilated area,
away from ignition sources such as gas fired or electrical
appliances. During leak test, keep grill away from open flames
or sparks.
!
Strap and Cap
•Use a clean paintbrush and a 50/50 mild soap and water
solution. Brush soapy solution onto areas indicated by arrows
in figure below.
Do not use a POL transport plug
(plastic part with external threads)!
It will defeat the safety feature of
the valve.
A Do not use household cleaning agents. Damage to gas
train components can result.
5.Hold regulator and insert nipple into LP
cylinder valve. Hand-tighten the
coupling nut, holding regulator in a
straight line with LP cylinder valve so
as not to cross-thread the connection.
Nipple has to be centered
intothe LP cylinder valve.
If "growing" bubbles appear do not use or move the LP
cylinder. Contact an LP gas supplier or your fire
department!
Type 1 outlet with
thread on outside
Leak Testing Valves, Hose and Regulator
1.Turn all grill control knobs to OFF.
2.Be sure regulator is tightly connected to LP cylinder.
3.Completely open LP cylinder valve by turning hand wheel
counterclockwise. If you hear a rushing sound, turn gas off
immediately. There is a major leak at the connection. Correct
before proceeding.
Hold coupling nut and regulator
as shown for properconnection
to LP cylinder valve.
4.Brush soapy solution onto areas circled below, or other similar
fittings on your grill.
6.Turn the coupling nut clockwise and tighten to a full stop. The
regulator will seal on the back-check feature in the LP cylinder
valve, resulting in some resistance. An additional one-half to
three-quarters turn is required to complete the
connection. Tighten by hand only - do not use tools.
NOTE:
If you cannot complete the connection, disconnect regulator and
repeat steps 5 and 6. If you are still unable to complete the
connection, do not use this regulator!
Do not insert any tool or foreign object into the valve
outlet or safety relief valve. You may damage the valve
and cause a leak. Leaking propane may result in
explosion,fire, severe personal injury, or death.
Outdoor gas appliance is not intended to be installed
in or on a boat.
Outdoor gas appliance is not intended to be installed
in or on an RV.
, Never attempt to attach this grill to the self-contained
LP gas system of a camper trailer or motor home.
, Do not use grill until leak-tested.
, If a leak is detected at any time, STOP and call the fire
department.
, If you cannot stop a gas leak, immediately close
LPcylinder valve and call LP gas supplier or your fire
department!
5.If "growing" bubbles appear, there is a leak. Close LP
cylinder valve immediately and retighten connections. If leaks
cannot be stopped do not try to repair. Call for replacement
parts.
6.Always close LP cylinder valve after performing leak test by
turning hand wheel clockwise.
Safety Tips
A Before opening LP cylinder valve, check the coupling nut for
tightness.
For Safe Use Of Your Grill And To Avoid Serious
injury:
• Do not let children operate or play near grill.
• Keep grill area clear and free from materials that burn.
• Do not block holes in bottom or back of grill.
• Check burner flames regularly.
• Use grill only in well-ventilated space. NEVER use in
enclosed space such as carport, garage, porch, covered
patio, or under an overhead structure of any kind.
• Do not use charcoal or ceramic briquets in a gas grill.
(Unless briquets are supplied with your grill.)
• Use grill at least 3 ft. from any wall or surface. Maintain
10 ft clearance to objects that can catch fire or sources of
ignition such as pilot lights on water heaters, live electrical
appliances, etc.
A When grill is not in use, turn off all control knobs and LP
cylinder valve.
A If the outdoor cooking gas appliance is not in use, the gas
must be turned off at the supply cylinder. Storage of an
outdoor cooking gas appliance indoors is permissible only if
the cylinder is disconnected and removed from the appliance.
A Never move grill while in operation or still hot.
A Use long-handled barbecue utensils and oven mitts to avoid
burns and splatters.
A Maximum load for side shelves is 10 Ibs.
A The grease cup must be inserted into grease clip and
emptied after each use. Do not remove grease cup until grill
has completely cooled.
A Clean grill often, preferably after each cookout. If a bristle
brush is used to clean any of the grill cooking surfaces,
ensure no loose bristles remain on cooking surfaces prior to
grilling. It is not recommended to clean cooking surfaces
while grill is hot.
A If you notice grease or other hot material dripping from grill
onto valve, hose or regulator, turn off gas supply at once.
Determine the cause, correct it, then clean and inspect valve,
hose and regulator before continuing. Perform a leak test.
A The regulator may make a humming or whistling noise during
operation. This will not affect safety or use of grill.
A Only use the pressure regulator and hose assembly supplied
with this grill. Replacement pressure regulator and hose
assemblies must be specified or supplied by Char-Broil, LLC.
A If you have a grill problem see the "Troubleshooting Section".
A If the regulator frosts, turn off grill and LP cylinder valve
immediately. This indicates a problem with the cylinder and it
should not be used on any product. Return to supplier!
• Apartment Dwellers:
Check with management to learn the requirements and fire
codes for using an LP gas grill in your apartment complex. If
allowed, use outside on the ground floor with a three (3) foot
clearance from walls or rails. Do not use on or under
balconies.
• NEVER attempt to light burner with lid closed. A buildup
of non-ignited gas inside a closed grill is hazardous.
• Never operate grill with LP tank out of correct position
specified in assembly instructions.
• Always close LP tank valve and remove coupling nut
before moving LP tank from specified operation
position.
CAuT o.
•Putting out grease fires by closing the lid is not
possible. Grills are well ventilated for safety reasons.
•Do not use water on a grease fire. Personal injury may
result. If a grease fire develops, turn knobs and LP tank
off.
•Do not leave grill unattended while preheating or
burning off food residue on high. If grill has not been
regularly cleaned, a grease fire can occur that may
damage the product. Follow instructions on General
Grill Cleaning and Cleaning The BurnerAssembly to
prevent grease fires.
Ignitor Lighting
A Do not lean over grill while Eghting.
1. Turn OFF gas burner control valves.
2 Turn ON gas at LP cylinder.
3. Open lid during lighting..
4. To ignite, turn the IGNITION BURNER knob to the
Sideburner Match Lighting
1. Turn OFF all burner control valves.
2. Open sideburner lid (if equipped).
Turn ON gas at LP cylinder.
3. Place lit match near burner.
4. Turn sidebumer knob to the HI position.
Be sure burner lights and stays lit.
HI position.
5. Push and hold ELECTRONIC IGNITOR button.
Before Your First Cookout
6. If ignitiondoes NOT occur in 5 seconds, turn the burner
controls OFF, wait 5 minutes, and repeat lighting
procedure.
• Light burners, check to make sure they are lit, close the lid and
warm up grill on HI for 15 minutes. This curing of paint and
parts will produce an odor only on first lighting.
7. Ignite remaining burners by turning to the HI position,
starting with the burners closest to the IGNITION BURNER first.
Burner Flame Check
If ignition still does not occur, follow match-lighting
instructions.
CAUTioN
• Light burner, rotate knobs from Hi to LOW. You should see
a smaller flame in LOW position than seen on HI. Always
check flame prior to each use. If only low flame is seen refer to
"Sudden drop or low flame" in the Troubleshooting Section.
--HI
--
if burner does not Eght,turn knobs to OFF, wait 5
minutes, and try again. Always close vane during the 5
minute waiting period. If the burner does not ignite with
the vane open, gas will continue to flow out of the burner
and could accidentally ignite with risk of injury.
LOW
Hose Check
• Before each use, check to see if hoses are cut, worn or kinked.
Replace damaged hoses before using grill. Use only
valve/hose/regulator specified in the Parts List.
Match-Lighting
,& Do not lean over grill while lighting.
1. Turn OFF all burner control valves.
2. Open lid.Turn ON gas at LP cylinder.
3. Place lit match into match holder (hanging from cart side
panel), then into lighting hole on right or left side of grill.
4. Push in and turn far right or far left burner knob to the HI
Position. Be sure burner lights and stays lit.
5. Light adjacent burners in sequence by pushing knobs in and
turning to the HI position.
Normal
Hose
Kinked
Hose
Turning Grill Off
• Turn all knobs to OFF position. Turn LP tank OFF by turning
OPD hand wheel clockwise to a full stop.
Ignitor Check
• Turn gas OFF at LP tank. Press and hold ignitor button. "Click"
should be heard and spark seen each time between each
collector box or burner and electrodes. See "Troubleshooting"
if no click or spark.
Valve Check
• Important: Make sure gas is off at LP tank before checking
valves. Knobs lock in OFF position. To check valves, first
push in knobs and release, knobs should spring back. If knobs
do not spring back, replace valve assembly before using grill.
Turn knobs to LOW position then turn back to OFF position.
Valves should turn smoothly.
Sideburner
ignitor Lighting
,& Do not lean over grill while lighting.
1. Turn OFF all burner control valves.
2. Open sideburner lid (if equipped). Turn on gas at LP cylinder.
3. Turn sideburner knob to the HI position, push and hold
ELECTRONIC IGNITOR button.
4. If sideburner does NOT light, turn knob to OFF, wait 5
minutes, then repeat lighting procedure.
General Grill Cleaning
• Keep the outside of your grill looking new by cleaning it once a
month with warm soap and water or a non-abrasive cleaner. If
you don't have a grill cover, wipe off dust and grime before
starting your grill.
• Coating the cooking grids with spray-on cooking oil will keep the
food from sticking and make clean up easier. After cooking,
scrape the grates with a long handled, brass wire bristle brush.
• Check inside the grill bottom for grease build up and clean
often, especially after cooking fatty meat.
• Do not mistake brown or black accumulation of grease and
smoke for paint. Apply a strong solution of detergent and water
or use a grill cleaner with scrub brush on insides of grill lid and
bottom. Rinse and allow to completely air dry. Do not apply a
caustic grill/oven cleaner to painted surfaces.
* Plated wire grates: Wash grates with concentrated grill
cleaner or use soap and water solution. Dry thoroughly and
store indoors between cookouts.
o Plastic parts: Wash with warm soapy water and wipe dry.
A Do not use citrisol, abrasive cleaners, degreasers or a
concentrated grill cleaner on plastic parts. Damage to and
failure of parts can result.
* Porcelain grates: Because of glass-like composition, most
residue can be wiped away with baking soda/water solution or
specially formulated cleaner. Use non-abrasive scouring
powder for stubborn stains.
* Painted surfaces: Wash with mild detergent or nonabrasive
cleaner and warm soapy water. Wipe dry with a soft
nonabrasive cloth.
* Stainless steel surfaces: To maintain your grill's high quality
appearance, wash with mild detergent and warm soapy water
and wipe dry with a soft cloth after each use. Baked-on grease
deposits may require the use of an abrasive plastic cleaning
pad. Use only in direction of brushed finish to avoid damage.
Do not use abrasive pad on areas with graphics.
* Cooking surfaces: If a bristle brush is used to clean any of
the grill cooking surfaces, ensure no loose bristles remain on
cooking surfaces prior to grilling. It is not recommended to
clean cooking surfaces while grill is hot.
cAu'rlo.
f
SPIDER
ALERT!
Cleaning the Burner Assembly
Follow these instructions to clean and/or replace parts of burner
assembly or if you have trouble igniting grill.
1. Turn gas OFF at control knobs and LP cylinder.
2. Remove cooking grate and heat tent.
3. Under grill remove grease cup, disconnect ignitor wire from
burner.
4.
5.
6.
7.
Inside grill remove burner assembly (A), clean ceramic
portion of electrode with rubbing alcohol and a swab.
Clean outside of burner with soap and water. Lay burner
upside down on flat surface, insert garden hose to force
water through tubes. Make sure water comes out of all
burner holes. Open clogged holes with a thin wire. Shake
out excess water and examine holes. Due to normal wear
and corrosion some holes may become enlarged. If any
large cracks or holes are found replace burner.
If grill is to be stored, coat burner lightly with cooking oil.
Wrap in protective cover to keep insects out.
If not storing grill after cleaning, replace burner into grill
bottom.
VERY iMPORTANT: Burner tubes must re-engage valve
openings. See illustration (A).
8. Reattach ignitor wire to electrode.
9. Reposition heat tent and cooking grate. Reattach clean
grease cup to grease clip.
10. Before cooking again on grill, perform a "Leak Test"and
"Burner Flame Check".
GAS COLLECTOR
Correct burner-to-valve engagement
A
Burner Tube
/
/
INSIDEVENTURI
VALVE
AIR
SHUTTER
VENTURI
/
Ifyou notice that your grill is getting hard to light or that the
flame isn'tas strong as it should be, take the time to check and
clean the venturi's.
/
Valve
LIFT OUT
BURNER ASSEMBLY
B
_# REMOVE
BURNER
CLIPS
/
CLEAN OUT
VENTURI
SPIDER WEBS
INSIDE VENTURI
Insome areasof thecountry,spidersor small insectshavebeen
knownto create"flashback"problems.Thespidersspinwebs,build
nestsand lay eggsin thegrill'sventuritube(s)obstructingthe flow of
gas to the burner.The backed-upgas can ignitein theventuri behind
the controlpanel.This is knownas a flashbackand it can damage
yourgrill andeven causeinjury.
To preventflashbacksand ensuregood performancethe burnerand
venturiassemblyshouldbe removedfrom thegrill andcleaned
beforeusewheneverthe grill has beenidle for an extendedperiod.
X..
j
This warranty only applies to units purchased from an authorized retailer. ManuPacturer warrants to the original cunsumer-purchaser only that this
product shall be fiec from defects in workmanship and materials after correct assembly and under normal and reasonable home use for the periods
indicated below beginning on the date of purchase*. The manuPacturer reserves the right to require that defective parts be returned, postage and or
freight pre-paid by the consumer for review and examination.
SCOPE
OF COVERAGE
PERIOD
*Note:
original
TYPE
l year from date of prochase*
All Parts
The
OF COVERAGE
consumer-purchaser
A dated sales reciept
will be responsible
charges
FAILURE
COVERAGE
PERFORATION, MANUFACTURING,
AND MATERIAL DEFECTS ONLY
WILL be required
for all shipping
OF
for walTanty
for parts
service.
replaced
under
the terms
of this limited
warranty.
This limited warranty is applicable
in the United States and Canada only; is only available to the original owner of the product and is not transferable.
Manufacturer
requires proof of your date of purchase.
Therefore,
you should retain your sales slip or invoice.
Registering
your product is not a
substitute for proof of purchase and the manuPacturer
is not responsible
for or required to retain proof of purchase records.
This limited wananty applies to the functionality of the product ONLY and does not cover cosmetic issues such as scratches, dents, corrosions or
discoloring by heat, abrasive and chemical cleaners or any tools used in the assembly or installation of the appliance, surt:ace rust, or the
discoloration of stainless steel surt:aces. RUST is not considered a manufacturing
or materials defect.
This limited
warranty
will not reimburse
you for the cost of any inconvenience,
food, personal
injury
or property
damage.
ITEMS MAN UFACTURER WILL NOT PAY FOR:
1. Shipping cost, standard or expedited, for warranty and replacement parts
2. Service calls to your home.
3. Repairs when your product is used for other than normal, single-family household or residential use.
4. Damage, failures, or operating difficulties resulting from accident, alteration, careless handling, misuse, abuse, fire, flood,
acts of God, improper installation or maintenance, installation not in accordance with electrical or plmnbing codes, or use
of products not approved by the manufacturer.
5. Any food loss due to product failures or operating difficulties.
6. Replacement parts or repair labor costs for units operated outside the United States or Canada.
7. Pickup and delivery of your product.
8. Repairs to parts or systems resulting from unauthorized modifications made to the product.
9. The removal and/or reinstallation of your product.
DISCLAIMER OF IMPLIED WARRANTIES and LIMITATION OF REMEDIES
Repair or replacement of defective parts is your exclusive remedy under the terms of this limited warranty. In the event of parts availability issues,
the manufacturer reserves the right to substitute like or similar parts that are equally functional.
Manufacturer will not be responsible for any consequential or incidental damages arising fiom the breach of either this limited warranty or any
applicable implied warranty; or for failure or damage resulting from acts of God, improper care and maintenance, grease fire, accident, alteration,
replacement of parts by anyone other than Manufacturer, misuse, transportation, commercial use, abuse, hostile environments (inclement weather,
acts of nature, animal tampering), improper installation or installation not in accordance with local codes or printed manufacturer instructions.
THIS LIMITED
SPECIFICATION
WARRANTY
IS THE SOLE EXPRESS
WARRANTY
GIVEN BY THE MANUFACTURER.
OR DESCRIPTION
WHEREVER
APPEARING
IS WARRANTED
BY MANUFACTURER
NO PRODUCT
PERFORMANCE
EXCEPT TO THE EXTENT
SET
FORTH IN THIS LIMITED
WARRANTY.
ANY IMPLIED
WARRANTY
PROTECTION
ARISING
UNDER THE LAWS
OF ANY S'IWFE,
INCLUDING
IMPLIED
WARRANTY
OF MERCHANTABILITY
OR FITNESS
FOR A PAt_FICULAR
PURPOSE
OR USE, IS HEREBY
LIMITED
IN DURATION
TO THE DURATION
OF THIS LIMITED
WARRANTY.
Neither dealers nor the retail establishment
selling this product
has any authority
to make any additional
warranties
in addition to or inconsistent
with those stated above.
Manufacturer's
maximum
liability,
in any event, shall not exceed
product paid by the original consumer.
or to promise
remedies
the purchase price of the
NOTE: Some states do not allow an exclusion or limitation of incidental or consequential damages, so some of the above limitations or exclusions
may not apply to you. This limited warranty gives you specific legal rights as set foth herein. You may also have other rights which vary from state
to state. In the state of California only; if refinishing or replacement of the product is not commercially practicable, the retailer selling this product or
the Manufacturer will refund the purchase price paid for the product, less the amount directly attributable to use by the original consumer-purchaser
prior to discovery of the nonconformity. In addition, in the state of California only; you may take the product to the retail establishment selling this
product in order to obtain performance under this limited wananty.
if you wish to obtain
performance
of any obligation
under
write to:
Consumer
Relations
P. O. Box 124t)
this limited
warranty,
Columbus,
GA 3191)2-1241)
Consumer returns will not be accepted unless a valid Return Authorization
is first acquired.
Authorized
the package with an RA number and the package is shipped freight/postage
pre-paid.
Consumer returns
refused.
you should
returns are clearly marked on the outside
that do not meet these standards will be
of
il! i IIIIIIIIIIllliii
A
1
LEFT FRONTLEG, CURVED
HH
2
MOUNTING BRACKET, F/SHELF, (LF/RB)
B
1
LEFT BACK LEG, STRAIGHT
II
2
MOUNTING BRACKET, F/SHELF, (RF/LB)
C
1
SIDE BRACE
JJ
1
LEFT SIDE SHELF F/SB
D
1
MATCH HOLDER
KK
1
DRIP PAN F/SB
E
2
UPPER LEG
LL
1
SIDEBURNER
F
2
SUPPORT BRACKET
MM
1
ELECTRODE W/ WIRE, F/SB
G
1
RIGHT FRONT LEG, CURVED
NN
1
RETAINER CLIP
H
1
RIGHTBACK LEG, STRAIGHT
OO
1
LID F/SB
I
2
LEG EXTENDER
PP
1
SIDEBURNERGRATE
J
1
UPPER FRONT PANEL
QQ
2
LOWER HINGE
K
2
FRONT PANEL MAGNET
RR
1
LID
L
1
LOWER FRONTPANEL
SS
1
LOGO PLATE
M
1
TOP BRACE
TT
1
HANDLE
N
2
BACK BRACE
UU
2
UPPER HINGE
O
2
TANK EXCLUSIONWIRE
W
1
COOKING GRATE
P
1
AXLE ROD
WW
1
HEAT DIFFUSER
Q
2
WHEEL
XX
1
SWINGAWAY
R
1
CONTROL PANEL
YY
1
GREASE CUP CLIP
S
1
LEFTFIREBOXSUPPORT
ZZ
1
GREASE CUP
T
1
RIGHT FIREBOXSUPPORT
U
1
MANIFOLD
V
1
ELECTRONIC IGNITIONMODULE
...
1
HARDWARE PACK
W
1
HEAT SHIELD F/EIMODULE
...
1
ASSYINSTRUCTIONS, ENGLISH
X
1
BUTTON, F/EIMODULE
...
1
ASSYINSTRUCTIONS, SPANISH
Y
1
HEAT SHIELD
Z
1
TANK RETAINER
AA
1
FRONT PANEL HANDLE
BB
1
CONDIMENT BASKET
CC
1
FIREBOX
DD
1
BURNER
EE
1
ELECTRODE/COLLECTOR
FF
4
KNOB
GG
1
RIGHT SIDE SHELF
NOT Pictured
15
UU
xx
TT
i
/
vv
V
QQ
_w
GG\
R_-_
W
,/
Q
i!
g
Left
Leg one upper leg as shown. NOTE: Left front and left back legs do not have leg extenders. In front, attach upper leg, side
i Place
brace and left front leg (curve) with #10-24x1-1/4" machine screw and #10-24 flange nut. Tighten screw. In back, attach upper
leg, side brace and left back leg (straight) with #10-24x1-1/4" machine screw and #10-24 flange nut. Do not tighten.
i
Attach support bracket in the third hole from bottom of leg with hinge pins and hitch pins (A).
j
Upper Leg
Hitch Pin
Qty.2
Hinge Pin
Qty.2
Side Brace
_
Left Back Leg
(Straight)
-:"
/
\
/
/
/
/
#10-24x1-1/4"
Machine Screw
/
Qty.2
Hitch Pin
Front Leg
(Curve)
Hinge Pin
"_Bracket
#10-24
Flange Nut
Qty. 2
Right Leg
i
i
Placeotherupperleg as shown.Attachupperleg and rightfront leg (curve)with #10-24x1-1/4"machine screw and #10-24
flange nut. Tighten screw.
Attachsupportbracketwith #10-24x1-1/4"machine screws and#10-24flange nuts.
Per Leg
Right Back Leg
(Straight)
\
_°rt
Bracket
Right Front Leg
(Curve)
#10-24x1-1/4"
Machine Screw
Qty.3
#10-24
Flange Nut
Qty. 3
Leg Extender
17
Upper and lower Front Panel and Top brace
[ Lay front legs down on the floor. Fit upper front panel between legs. Attach with 2" hinge pins and hitch pins through the
3rd hole down from the top of the leg, and the bottom hole of the top front panel.
_Attach lower front panel with #10-24x2" machine screws and #10-24 flange nuts through the 2 lowest holes on the legs.
} Attach top brace with #10-24x2" machine screws and #10-24 flange nuts through the 2 bottom holes of the upper leg.
Right leg
#10-24
Flange Nut
Qty. 8
Hitch Pin
Qty. 2
Upper Leg
Upper Leg
assem._
Left leg
assembly
1
#10-24x2"
Machine Screw
/
Top brace
Hitch Pin
Pin
#10-24x2"
Machine Screw
Qty.8
2" Hinge Pin
2" Hinge Pin
Qty.2
f
Lower Front Panel
#10-24x2"
Machine Screw
Back Brace to Cart
Removepreviouslyattachedscrewand nutsecuringthe upperleg and side braceas notedbelow.Attachupperand lowerbackbraces
with #10-24x1-1/4"machine screws and #10-24flange nuts.
BackBrace
#10-24x1-1/4"
Machine Screw
Qty.7
(One re-used)
Note:
Removepreviously installed
screw and nut from location
shown to attach upper back brace.
#10-24
Flange Nut
Qty. 7
(One re-used)
#10-24x1-1t4"
MachineScrew
Back Brace
Tank Exclusion
Hook tank exclusion wires onto lower front panel brackets, attach other ends to back brace with #8-32x3/8" sheet metal
screws.
#8-32X3/8"
Sheet Metal Screw
#8-32X3/8"
Sheet Metal Screw
Qty. 2
T
Loosen screws to
adjust upper and
front panels to line up
Tank Exclusion
Wire
Back Brace
Wheels
Turn assembly upside down.
Insert axle rod through wheel, legs and other wheel. Attach with a wheel bushing and hitch pin. See insert below for the
correct holes to use.
Axle Rod
Wheel
i{
Hitch Pin
/
Hitch Pin
Qty.1
Wheel Bushing
Qty.1
./
Wheel
"Cone" side of wheel against leg
Wheel Bu:
Control Panel and Firebox Support
ill] Stand cart upright.
In front, fit control panel between left and right legs. Insert #10-24x2" machine screws to hold panel in place. Place upper
firebox supports onto screws making sure angle side is facing the front and attach with #10-24 flange nuts. See the insert
for correct placement.
} In back, attach upper firebox support with #10-24x2" machine screws and #10-24 flange nuts.
NOTE:
An(
#10-24x2"
MachineScrew
Control panel
Left firebox
support
#10-24x2"
MachineScrew
Qty.8
#10-24
FlangeNut
Qty.8
Manifold assy and Ignitor
Attach Manifold assy to control panel using #10-24x1/2" machine screws. Make sure the regulator hose is hanging
outside the cart.
[ Remove ignitor cap and plastic hex nut from Electronic Ignition Module assembly. Insert module into the opening on
control panel and attach with the removed hex nut. Place AAA battery into module slot with positive end (+) facing
outward. Screw ignitor cap onto module.
.................
Button
Hex Nut
#10-24xl/2"
Machine Screw
.............
AAA Battery
_,¢ .....
\
Qty.3
Regulator Hose
2O
Heat Shield
Attach heat shield with #10-24x1/2" machine screws and #10-24 flange nuts.
Tank Retainer
Insert tank retainer into side brace and secure with #10-24x3/8" wing screw.
#10-24xl/2"
Machine Screw
Qty.2
#10-24
Flange Nut
Qty. 2
#10-24x3/8"
Wing Screw
Qty.1
Front Panel Handle and Condiment basket
Attach front panel handle to upper front panel using #10-24 flange nuts (A).
iiiiiiiAttach condiment basket to upper front panel as shown ( B ).
A
#10-24
Flange Nut
Qty. 2
Front panel handle
B
Condiment basket...................
21
Burner, Firebox and Control Knobs
Place burner assembly into firebox. Fasten the burner assembly to the firebox using 5x15 fiber washers and #1024x1/2" machine screws (A).
i_ Insert #10-24x1-1/4" machine screws from outside firebox, then fasten with #10-24 flange nuts and 5x15 fiber washers
from inside (A).
Place firebox on cart. Make sure burner tubes are correctly engaged with valves. Attach ignitor wire to ignition module (B).
Attach firebox with #10-24x2" machine screws, 5x15 fiber washers and #10-24 flange nuts (C).
Push control knobs onto valve stems ( C ).
Burner assembly
A
Firebox
................ #10-24x1-1/4"
5"
Machine Screw
#10-24
Flange Nut
/
#10-24
5xl 5
Flange Nut
Qty. 8
Fiber Washer
Qty.10
z
#10-24x1-1/4"
Machine Screw
Qty.4
#10-24Xl/2"
Machine Screw
Qty.6
5X15 Fiber Washer
B
5X15 Fiber Washer...........
_'
#10-24X1/2..............
_'_
Machine Screw
1"
#10-24Xl/2"
Machine Screw ..............
o
5X15 Fiber Washer '_€
Knob
Correct burner-to-valveengagement
\
Burner Tube
....
/
!
Valve
#10-24 Flange Nut
22
Right Side Shelf and Side Burner Support Shelf
I 3 Insert mounting brackets into Right Side Shelf Support, and secure with #10-24x1/2" machine screws (A).
Insert mounting brackets into Side Burner Shelf Support, and secure with #10-24x1/2" machine screws (B) and (C).
Attach the sideburner lid to side burner shelf with #10-24 nuts and shoulder bolts.
Attach Right Side Shelf and Side Burner Support Shelf to front of leg with 1/4"-20x1/2" machine screws. Attach to back
of leg with 1/4"-20x1-1/4" machine screws and 1/4"-20 flange nuts (E).
A
Right Side Shelf
B
S
#10-24Xl/2"
......
Machine Screw
#10-24Xl/2"
Screw
!
Mounting
Bracket
Side Shelf Support
Side Shelf Support
#10-24 Nut
#10-24X1/2"
Machine Screw
Qty. 2
Sidebumer lid
\
D
,%
C
#10-24 Nut
Shoulder Bolt
Qty. 2
Shoulder Bolt
E
1/4"-20
Flange Nut
Qty. 4
#10-24Xl/2"
Machine Screw
Qty.8
1/4"-20x1-1/4"
Machine Screw
1/4"-20xl/2"
Machine Screw
Qty.4
Qty.4
23
Sideburner
[
Attach sidebumer valve with #8-32x3/8" machine screws. Place sideburner into shelf (A). Make sure valve is inside
sideburner tube (B). Attach sideburner with #8-32 wing nut and 5x9 fiber washer (A).
:_Hook sideburner clip to sideburner tube and around manifold. Attach sideburner ignitor wire to ignition module. (B)
[i Press control knob onto valve stem and sideburner grate onto shelf (C).
A
1'
5x9
Fiber Washer
Qty.1
#8-32
Wing Nut
Qty.1
#8-32x3/8"
Machine Screw
Qty.2
5x9
Fiber Washer ...............
,,_i
,,Vd'_
#8-32 Wing Nut .......
B
Sideburner Clip
Qty.1
"..%
Sideburner Clip
C
Sideburner Grate
Knob
24
Lower Hinges
[ Attach lower hinges to back of firebox using #10-24x1/2" machine screws, 5x15 fiber washers and #10-24 flange nuts.
The center flat portion of the hinge should be at the bottom (see inset).
5x15
Fiber Washer
...
......
#10-24xl/2"
Machine Screw
#10-24xl/2"
Machine Screw
Qty.4
Center flat portion of
hinge on bottom
#10-24
nge Nut
5x15
Fiber Washer
Qty.8
#10-24
Flange Nut
Qty. 4
Lid Handle and Upper Hinges
Attach handle to lid with 7x15 fiber washers and 1/4"-20 wing nuts (A).
Attach upper hinges to back of lid using #10-24x1/2" machine screws, 5x15 fiber washers and #10-24 flange nuts.
Hinge should curve downward when properly installed (B).
#10-24xl/2"
Machine Screw
Qty.4
#10-24
5xl 5
7xl 5
1/4"-20
Flange Nut
Qty. 4
Fiber Washer
Qty.8
Fiber Washer
Qty.4
Wing nut
Qty.2
B
A
5x15
Fiber
...........
..............
Upper Hinge
#10-24xl/2"
i
Machine Screw............
_4
25
Attach Lid
Place lid assembly onto firebox, aligning hinges.
Hinges on lid fit inside hinges on firebox. Secure
using two hinge pins and hitch pins.
Hitch Pin
Qty. 2
Hinge Pin
Qty. 2
Heat Tent and Cooking Grate
Place heat tent inside firebox onto support screws.
Place cooking grate into firebox.
Cooking Grate
Heat Tent
Swing Away
Insert ends of Swing Away pivot wire into holes in
sides of grill lid. Insert ends of Swing Away leg wire
into holes in sides of firebox. NOTE: Pivot and leg
wires, running side-to-side, should be under wires
running front-to-back. If pivot and leg wires are on
top, Swing Away is installed upside-down.
26
Swingaway
Grease Cup and Grease Cup Clip
Hang grease cup clip from bottom of firebox and place grease cup into grease cup clip.
Failure to install grease cup clip
and cup will cause hot grease to
drip from bottom of grill with risk of
fire or property damage.
Grease Cup Clip
Grease Cup
LP Tank
Tank collar opening must face to front of grill. Loosen wing nut from tank retainer bracket. Set bottom of tank into notches of
tank support bracket. Place tank retainer bracket onto tank collar and tighten wing nut.
LP CYLINDER iS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use &
Care section). Once cylinder has been filled and leak checked, place cylinder into notches in tank support bracket.Make sure
cylinder valve is facing front of grill. See Use & Care section of this manual to perform the "Burner
Check" and for important safety instructions before using.
Flame
Always keep LP cylinders in
upright position during use,
transport, and storage.
Tank retainer...................
Regulator........................
Tank.......
CAUTION
Cylinder valve must face to front of cart once tank
is attached. Failure to install cylinder correctly may
allow gas hose to be damaged in operation,
resulting in the risk of fire.
Correctly installed
LP cylinder
27
EIVlERGENCIIES=
if a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department.
Gasleakingfrom
cracked/cut/burned
hose.
, Damagedhose.
, Turnoff gas at LP cylinderor at sourceon naturalgassystems.If
anythingbut burned,replacevalve/hose/regulator.
If burned,
discontinueuseof productuntila plumberhas investigatedcause
and correctionsare made.
Gasleakingfrom LP
cylinder.
, Mechanicalfailuredue to rustingor
mishandling.
, ReplaceLP cylinder.
Gasleakingfrom LP
cylindervalve.
, Failureof cylindervalve from
mishandlingor mechanicalfailure.
, Turnoff LP cylindervalve.ReturnLP cylinderto gassupplier.
Gasleakingbetween
LP cylinderand
regulatorconnection.
, Improperinstallation,connectionnot
tight,failureof rubberseal.
, Turnoff LP cylindervalve.Removeregulatorfrom cylinderand
visuallyinspectrubbersealfor damage.See LP CylinderLeakTest
and ConnectingRegulatorto the LP Cylinder.
Firecomingthrough
controlpanel.
, Firein burnertube sectionof burnerdue
to blockage.
, Turnoff control knobsand LP cylindervalve.Leavelid opento
allowflamesto die down.After fire is outand grill is cold,remove
burnerand inspectfor spidernestsor rust.See NaturalHazard
and Cleaningthe BurnerAssemblypages.
Greasefire or
continuousexcessive
flamesabovecooking
surface.
, Toomuchgreasebuildupin burnerarea.
, Turnoff control knobsand LP cylindervalve.Leavelid opento
allowflamesto die down.After cooling,cleanfood particlesand
excessgreasefrom insidefireboxarea,greasetray,and other
surfaces.
Troubleshooting
Burner(s)will not light
usingignitor.
(See ElectronicIgnition
Troubleshooting
also)
GASiSSUES:
, Tryingto lightwrongburner.
, Seeinstructionson control paneland in Useand Caresection.
, Burnernot engagedwith controlvalve.
, Makesurevalvesare positionedinsideof burnertubes.
, Obstructionin burner.
, Ensureburnertubesare not obstructedwith spiderwebsor other
matter.See cleaningsectionof Useand Care.
, Nogas flow.
, MakesureLP cylinderis not empty.If LP cylinderis notempty,
referto "Suddendrop in gasflow."
Continuedon next
page.
, Fora grill equippedwith theAUTO-CLEAN
TM feature,makesure
theAUTO-CLEAN
TM valve is set to "Grill"
28
, Vaporlock at couplingnutto LP cylinder.
, Turnoff knobsand disconnectcouplingnut from LPcylinder.
Reconnectand retry.
, Couplingnut and LP cylindervalve not
fully connected.
, Turnthe couplingnutapproximatelyone-halfto three-quarters
additionalturn untilsolidstop.Tightenby handonly- do not use
tools.
ELECTRICALISSUES:
, Electrodecrackedor broken;"sparksat
crack."
, Replaceelectrode(s).
, Electrodetip notin properposition.
MainBurners:
, Tip of electrodeshouldbe pointingtowardgasport openingon
burner.The distanceshouldbe 118"to 114".Adjust if necessary.
Sideburner:
, Tip of electrodeshouldbe pointingtowardgasport openingon
burner,the distanceshouldbe 118"to 3116".Adjust if necessary.
, Wire and/orelectrodecoveredwith
cookingresidue.
, Cleanwireand/orelectrodewith rubbingalcoholand cleanswab.
, Wires are looseor disconnected.
, Reconnectwiresor replaceelectrode/wireassembly.
, Wires are shorting(sparking)between
ignitorand electrode.
, Replaceignitorwire/electrodeassembly.
, Deadbattery.
, Replacewith a newAA-sizealkalinebattery.
Troubleshooting (continued)
Burner(s)will not light
usingignitor.
(See ElectronicIgnition
Troubleshooting
also)
Burner(s)will not
matchlight.
ELECTRONICIGNITION:
• Nospark,no ignitionnoise.
• SeeSectionI of ElectronicIgnitionSystem.
• Nospark,someignitionnoise.
• SeeSectionII of ElectronicIgnitionSystem.
, Sparks,but notat electrodeor at full
strength.
• SeeSectionIII of ElectronicIgnitionSystem.
• See"GAS ISSUES:"on previouspage.
• Matchwill not reach.
, Uselong-stemmatch(fireplacematch).
• Impropermethodof match-lighting.
• See"Match-Lighting"sectionof Useand Care.
, Outof gas.
• Checkfor gasin LP cylinder.
• Excessflow valvetripped.
•Turnoff knobs,wait 30 secondsand lightgrill. If flamesare still low,
turnoff knobsand LP cylindervalve.Disconnectregulator.
Reconnectregulatorand leak-test.Turnon LP cylindervalve,wait
30 secondsand thenlightgrill.
•Vaporlock at couplingnut/LPcylinder
connection.
•Turnoff knobsand LP cylindervalve.Disconnectcouplingnutfrom
cylinder.Reconnectand retry.
• Highor gustingwinds.
•Turnfront of grill to face windor increaseflameheight.
• Lowon LP gas.
• RefillLP cylinder.
• Excessflow valvetripped.
• Referto "Suddendrop in gasflow"above.
• Greasebuildup.
• Cleanburnersand insideof grilltfirebox.
• Excessivefat in meat.
•Trim fat from meat beforegrilling.
• Excessivecookingtemperature.
•Adjust(lower)temperatureaccordingly.
Persistentgreasefire.
• Greasetrappedby foodbuilduparound
burnersystem.
•Turnknobsto OFF.Turngas off at LPcylinder.Leavelid in position
and let fire burnout.After grill cools,removeandcleanall parts.
Flashback...
(firein burnertube(s)),
• Burnerand/orburnertubesare blocked.
•Turnknobsto OFF.Cleanburnerand/orburnertubes.See burner
cleaningsectionof Use and Care.
Unableto fill LP
cylinder.
• Somedealershaveolder fill nozzles
withworn threads,
•The wornnozzlesdon'thaveenough"bite"to engagethe valve.Try
a secondLPdealer.
One burnerdoes not
lightfrom other
burner(s).
• Greasebuildupor foodparticlesin
end(s)of carryovertube(s).
• Cleancarry-overtube(s)with wirebrush.
Suddendrop in gas
flow or low flame.
Flamesblowout.
Flare-up.
Timerdoesnot work
(Greenlightdoesnot
flash)
•
•
•
DeadBattery
Batteriesinstalledincorrectly.
Knob Positiondid notstart the Clean
Cycle
•
•
•
ReplaceBatteries
Installbatteriescorrectly.
PushKnobin to startthe cleancycle.(GreenLEDshouldbeginto
flash)
No LED'swill illuminate
•
DeadBattery
•
ReplaceBatteries
RedLED nextto battery
symbolis illuminated
•
LowBatteryStrength
•
Prepareto replacebatteries(NOTE:Cleancyclewill operatewith
a weak battery.
29
Troubleshooting - Electronic Ignition
SECTIONI
Nosparksappearat
• Batterynot installed
anyelectrodeswhen
properly.
ElectronicIgnitionButton
is pressed;no noise can
be heardfromspark
, Deadbattery.
module.
, Checkbatteryorientation.
• Installbattery(makesurethat "+"and "-"
connectorsare orientedcorrectly,with "+"end up
and "-" enddown.)
, Has batterybeen used
previously?
• Replacebatterywith newAA-sizealkalinebattery.
, Buttonassemblynot
installedproperly.
Checkto insurethreadsare
properlyengaged.Button
shouldtravelup and down
withoutbinding.
, Unscrewbuttoncap assemblyand reinstall,making
sure threadsare alignedand engagedfully.
, Faultysparkmodule.
If no sparksare generated
with new batteryand good
wire connections,moduleis
faulty.
, Replacespark moduleassembly.
SECTIONII
• Outputlead
Nosparksappearat
connectionsnot
any electrodeswhen
ElectronicIgnitionButton connected.
is pressed;noisecan
be heardfrom spark
module.
, Are outputconnectionson
and tight?
, Removeand reconnectall outputconnectionsat
moduleandelectrodes.
SECTIONill
Sparksare present
butnot at all
electrodesand/ornot
at fullstrength
, Are outputconnectionson
and tight?
, Removeand reconnectall outputconnectionsat
moduleandelectrodes.
3O
• Outputlead
connectionsnot
connected.
, Arcingto grill away
from burner(s).
If possible,observegrill in
dark location.Operate
ignitionsystemand lookfor
arcingbetweenoutputwires
and grill frame.
• If sparksare observedotherthan fromburner(s),
wire insulationmay be damaged.Replacewires.
, Weakbattery.
All sparkspresentbutweak
or at slow rate.
, Replacebatterywith a newAA-sizealkalinebattery.
, Electrodesare wet.
Has moistureaccumulated
on electrodeand/orin burner
ports?
, Use papertowel to removemoisture.
, Electrodescrackedor
broken"sparksat
crack".
Inspectelectrodesfor
cracks.
, Replacecrackedor brokenelectrodes.
Please registeryourproductonline at:
(if you register online, you do not need to send in this registration card,)
PLEASEFiLL OUT THiS CARDAND ATTACH A COPYOF YOUR SALES RECEIPT. RETURN iT WiTHiN t0 DAYS OF PURCHASE.FAILURETO RETURN MAYAFFECT
YOUR WARRANTYCOVERAGE.FORWARRANTYSERVICE PROOFOF PURCHASEWiLL BE REQUIRED. THiS WARRANTYiS NON-TRANSFERABLE.
LLENE ESTATARJETAY DEVUELVALADENTRODE LOS 10 DIAS DE LACOMPRA. SI NO LADEVUELVE,PUEDEVERSEAFECTADA SU COBERTURA DE GARANTIA.
PARA EL SERVIClODE GARANTIAESNECESARIOQUE PRESENTESU COMPROBANTEDE COMPRA. CONSERVELAFACTURA. ESTA GARANTIA ES INTRANSFERIBLE.
VEUILLEZCOMPLETERCETTECARTE ET LARETOURNERDANS LES 10 JOURS SUIVANT L'ACHAT. LACOUVERTUREDEVOTRE GARANTIEPOURRAITEN ETRE
AFFECTEESI VOUS NE LE FAITESPAS. POUR OBTENIR LE SERVICESOUS GARANTIE,UNE PREUVED'ACHAT DOlT ETRE PRESENTEE.VEUILLEZ CONSERVER
VOTRE FACTURE.LA PRESENTEGARANTIEN'EST PAS TRANSFERABLE.
1 FirstName/Nornbre/Pr6nom
I I I I I I I I I I I I I I I I
Initiall|niciallinitia|e LastNamelApeliidolNomdefamilie
L_J
I I I I I I I I I I I I I I I I I I I I I I
Address(numberandstreet)/Direccibn(n0meroy calle)/Adresse(num6roet rue)
I!
II
II
II
!!
III!1
II
!!
II
AptNumber/N_de apart.INnd'appt.
II
III
City/Ciudad/Vi|le
I ! II
II
II
StatelEstadolPravince
I I I I I I I I ! I I I I I I I I ! ! I
II
II
Zip Code/C6digo
Zip/Codepostal
I I I
I I
I I I I
2 E=mailAddress/Direcci6n
de coffeeelectr6nice/Adresse61ectronique
If you voluntarily provide us with your email address, you give us permission to use your email address to send you offers that may interest you.
Sinos informa voluntariamente su direccion de coffee electr6nico, nos da permiso para usarlo a fin de enviarle ofertas qua pueden interesarle.
Si vous choisissez de nous fournir votre adresse e/ectronique, vous nous donnez la permission de I'utiliser pour vous faire part d'offres specialee susceptibles
de vous int_resser.
I
I
(Example:
yourname@yourhost.cam)
(Ejemplo:su nombre@suhost.cam)
3 PhoneNumber/N_meratelef6nico/Num6rede t61_phone
1 0 Attachcopyof yoursalesreceipthere
Adjunteaqui la capiade su
recibede cornpra
Veuillezattacher unecopiede
vatrere_u ici.
(Example: votrenom@votrehSte.com)
6 Dateof Purchase/Fecha
de compra/Datede I'achat
I I I I L__L_LJ _
I I I I I I I I I I I
IM PORTANT!/iIMPORTANTE!/IMPORTANT!
Write Serial Number and Model Number in spaces below.
Escriba en los espacios de abajo el nEsmerode serie
y el nEsmerode modelo.
Inscrivez le numero de s_rie et le num_ro de mod_le
dans los espaces ci-dessou&
7 Store Name/Nombrede la tienda/Norndu magasin
I I II
I !!
I I I II
I ! ! I I
8 PurchasePrice/Preciede compra/Prixd'achat
$1 I I I I .oo
5 YourGender/Sexo/Sexe
:
1. []
Male/Masculino/Masculin
9 Which product are you registering?
i,Qu_ producte est_ registrando?
Quel produit enregistrez-vous?
1. [] GasGdll/Parrilla a gas/Gril au gaz
2. [] Electric Grill/Parrilla el6ctrica/Gril 61ectrique
3. [] Smoker/Ahumador/Fumoir
4. [] Charcoal Grill/Parrilla a carb6n/Barbecue au charbon
5. [] Charcoal SmokeriAhumador a carb6n/Fumoir au charbon
2. []
Female/Femenino/F_minin
Mail to: /Envielo
Warranty Registration
a:
Department
P.O.Box 1240
Columbus, GA 31902-1240
6. [] Outdoor Fireplace/Chimenea para exteriores/Foyer ext6rieur
7. [] Cooker/Fryer/ CocinaJfreidora/ Cuiseur/Friteuee
8. [] OtheriOtro/Autre
Thank you for completing this questionnaire. Your answers will help us and other companies reach you with offers that may
interest you. if you prefer not to receive these offers, please check here []
Graciaspar completar este cuestionario. Sus respuestas nos ayudar&n,a nosotros y a otras compaSias, a Ilegar a usted con
ofertas que puedan resultade de inter6s. Si prefiere no recibir estas ofertas, par favor marque aqui [].
Merci d'avoir bien voulu remplir ce questionnaire. Vos r@onses nous aideront et aideront d'autres compagnies _,vous
communiquer des of fres speciales susceptibles de vous int6resser. Si vous pr6f6rez ne pas recevoir d'informations
concernant ces of fres sp6ciales, veuillez cocher ici [].
31
• Register
your
Char-Broil
• Get information
about
• Our replacement
parts
• Reliable
customer
• Delicious
recipes
• Char-Broil
®on-line
• Sizzle On The Grill
• And much
® product
our products
support
store
E-newsletter
TM
more!
Please visit us at www.charbroil.com
Buy Online
link to find
maintenance
items,
Char-Broil
covers,
tools and accessories,
grill parts, as well as
®grills and cookers.
Offers section,
In addition
grilling
and click on the
We also have a Special
so be sure to check often
to the online
for specials
store, charbroil.com
deals.
offers you a
wealth of information
regarding
Char-Broil ® gas, charcoal,
electric, and new infrared grills and cookers.
Be sure to check out our many
forget
to sign up for our exciting
Grill TMto stay updated
latest happenings
grilling
newsletter
on new recipes,
here at Char-Broil
Charbroil.com
also offers on-line
Char-Broil ® products.
recipes
and don't
Sizzle on the
contests,
and the
®.
customer
Thank you for support,
HAPPY GRILLING!
support
for
and
Download PDF