Miele | T 5205 C | Operating instructions | Miele T 5205 C Operating instructions

Operating and Installation instructions
for Condensor Tumble Dryer
T 5205 C
It is essential to read these
operating instructions before
installing or using the machine,
to avoid the risk of accident
or damage to the machine.
Q
M.-Nr.: 04 076 300
Contents
Contents
Warning and safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Help to protect the environment
Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Disposal of your old machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Energy saving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Guide to the machine
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Explanation of control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Use of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Preparation of laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
How to dry correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Prepare the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Load the drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Select a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Start a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 At the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
13
14
14
14
Changing a programme
To cancel a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adding or removing items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To select a different programme during drying . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2
Contents
Cleaning and care
Cleaning the fluff filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Casing and drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Heat exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Problem solving guide
What to do if . . . ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To change the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Installation
View from the front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
View from the rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aligning the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coin mechanism / Time counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
27
28
28
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
External drainage of the condensed water . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3
Warning and safety instructions
Warning and safety instructions
Please read the operating instructions before using the tumble dryer
for the first time. They contain important information about the safety,
use and maintenance of the machine. This way you will avoid the
risk of accidents and damage to the
machine.
Keep these operating instructions in
a safe place and ensure that new
users are familiar with the content.
Pass them on to any future owner of
the machine.
Correct use
The tumble dryer is only intended
for drying fabrics which have been
washed in a water solution, marked on
the manufacturer’s wash care label as
being suitable for tumble drying.
Any other applications may be dangerous. The manufacturer is not liable
for damage resulting from improper
use or operation.
Do not let small children play with the
machine or its controls. Supervise its
use by the elderly or infirm.
Technical safety
Before setting up the machine
check it for any externally visible
damage. Do not install or use a damaged machine.
Before connecting the machine,
ensure that the connection data on
the data plate (fusing, voltage and frequency) matches the mains electricity
supply. If in any doubt, consult a qualified electrician.
4
The electrical safety of this machine can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system which complies with local and
national regulations. It is most important that this basic safety requirement is
regularly tested by a qualified electrican.
The manufacturer cannot be held responsible for the consequences of an
inadequate earthing system (e.g. electric shock).
Do not connect the machine to the
mains electricity supply by an extension lead. Extension leads do not
guarantee the required safety of the
machine (e.g. danger or overheating).
The machine is built in accordance
with current safety requirements.
Unauthorised repairs could result in unforeseen dangers for the user, for
which the manufacturer cannot accept
responsibility. Repairs should only be
undertaken by a Miele approved engineer.
Faulty components must only be
exchanged for Miele original spare
parts. Only when these parts are fitted
can the safety standards of the machine be guaranteed.
Warning and safety instructions
In the event of a fault or for cleaning purposes, the machine is only
completely isolated from the electricity
supply either when:
– the plug is withdrawn, or
– it is switched off at the mains, or
– the mains fuse is withdrawn.
The dryer must not be used without the fluff filters in place or if the
fluff filters are damaged in any way.
The dryer must not be used without the heat exchanger in place.
Do not install the machine in a
room where the temperature may
drop below freezing. At very cold temperatures the machine may be difficult
to start. Laundry will not dry, and the sequence indicator light ~ r Anti-crease
/ End will flash to indicate a problem.
Make sure the drain hose is securely attached if you hang it in a
sink or basin (external drainage of condensed water) to avoid the hose slipping and the water causing damage.
Condensed water is not drinking
water. It can cause health problems in both people and animals.
Always close the door after use.
This way you will avoid the danger
of:
– anyone sitting or leaning on the
door, which can cause the machine
to tip up.
– children climbing onto or into the
dryer or hiding things in it.
Always keep the area around the
machine free of dust and fluff.
There is a risk of damage if the condensed water is allowed to freeze in
the pump, hoses and / or condensed
water container.
5
Warning and safety instructions
There is a danger of fire with fabrics which:
– contain rubber, foam rubber or rubber like materials
– have been treated with inflammable
cleaning agents
– have been splashed with hair lacquer, hair spray, nail varnish
remover or similar substances
– which contain padding or fillings
(e.g. pillows, jackets). If these were
damaged the filling could get out
with the risk of igniting in the dryer.
Avoid contact of stainless steel surfaces (front, lid, casing) with liquid
cleaning and disinfecting agents which
contain chlorine or sodium hypochlorite. These agents can have a corrosive effect on stainless steel. Aggressive vapours containing chlorine
bleach can also be corrosive. Do not
store open containers or these agents
near the machine.
6
Using accessories
Accessory parts may only be fitted
when expressly approved by
Miele. If other parts are used, guarantee, performance and product liability
claims may be invalidated.
Disposal of your old machine
Before discarding an old machine
unplug it and render the plug useless. Cut off the cable directly behind
the appliance to prevent misuse.
Help to protect the environment
Help to protect the environment
Disposal of the packing
material
The transport and protective packing
has been selected from materials
which are environmentally friendly for
disposal and can normally be recycled.
Rather than just throwing these materials away, please ensure they are offered for recycling.
Disposal of your old machine
Old machines contain materials which
can be reclaimed or recycled. Please
contact your dealer, your local waste
collection centre or scrap merchant
about potential recycling schemes.
Ensure that the machine presents no
danger to children while being stored
for disposal.
Energy saving tips
Make sure that your laundry is thoroughly spun before drying. You will
save up to 30% energy and time if
laundry is spun at 1200 rpm instead
of at 600 rpm.
Load according to the optimum
amount of washing recommended
for the programme being used.
Underloading is uneconomical. Overloading gives a poorer quality of
drying and may cause unnecessary
creasing.
To save energy and time:
– Make sure the room in which the
dryer is located is well ventilated.
– Make sure the fluff filter is clean before using the dryer.
7
Guide to the machine
Guide to the machine
Control panel
Opens the drum door
Programme sequence
Drying
!
ä Cool air
~ r Anti-crease/End
n Light
Programme selector
Illuminates the drum
The programme selector can be turned
clockwise or anti-clockwise.
Pushbutton switches
a Door
L
Low temperature
Lower drying temperatures (for delicate
fabrics with the care label r, e.g. acrylics)
h Start
Starts a programme
A
1
2
3
4
5
6
Cottons
B
7
8
9
Minimum iron
Extra dry
Normal +
Normal
Hand iron r
Hand iron rr
Machine iron
Additional display
( above the pushbutton switches)
Displays the drying stage reached.
Displays “0” at anti-crease stage.
Nothing is displayed with timed drying.
Normal +
Normal
Hand iron
q “Check drain” indicator light
C Timed drying
0 Cool air 15 mins
! Hot air 20 mins
8
Guide to the machine
Explanation of control panel
Use of the appliance
A small panel is supplied with the machine to explain the symbols on the
control panel. Position this on the left
hand side next to the control panel.
This automatic tumble dryer is particularly suitable for use in communal
laundry rooms, laundrettes etc. where
considerable amounts of soiled laundry
are dealt with.
Set the small panel into the lower
guide, press downwards and at the
same time slot into the upper guide.
9
Preparation of laundry
Preparation of laundry
Wash care labels
Before drying check the drying
symbol on the wash care label.
Significance of symbols:
q = Dry at normal temperature
r = Dry at low temperature
s = Do not tumble dry
If no symbol is featured dry at your own
risk applying the following principles:
Cottons and minimum iron items
should be dried at a normal temperature using the appropriate programme
setting.
Delicate fabrics with the following
wash care label r, e.g. acrylics should
be dried at a low temperature.
The following fabrics should
not be dried in a tumble dryer:
Woollens and wool blends
these fabrics tend to become matted
and shrink.
Items filled with down
the fine fabric interior tends to shrink,
depending on the quality involved.
Pure linen
should only be machine dried if specified as suitable by the manufacturer on
the wash care label, as the surface of
the fabric may otherwise tend to
roughen.
10
General notes
Woven and loopkit materials (e.g. TShirts, knitted garments) tend to shrink
to varying extents depending on their
quality. This tendency is exaggerated
by over-drying. When purchasing
woven materials, it is advisable to take
their shrinkage properties into account.
Starched laundry can be dried in the
tumble dryer. To achieve the usual finish, double the amount of starch should
be used.
Minimum iron fabrics should be spun
briefly at the end of their wash programme, or spun for 10 to 30 seconds
if hand washed before they are dried.
Some fabrics tend to crease if overdried. These items should be given
only a short period in the dryer, and
taken out slightly damp. Do not use the
B Minimum iron - 7 Normal+ programme for these fabrics.
Minimum iron shirts in 100% cotton
may crease during tumble drying depending on the quality of the weave.
These should be dried using the Hand
iron 9 setting. In extreme cases drip
dry on a coat hanger.
Minimum iron fabrics tend to crease
more the greater the load. This is particulary the case with delicate fabrics.
The load should be reduced to 2 kg or
if necessary to 1.5 kg.
New dark coloured garments should
be dried separately from light coloured
garments to avoid the danger of
colours running.
Programme chart
Programme chart
Programme
A COTTONS
1 Extra dry
2 Normal+
3 Normal
(EN 61121)
4 Hand iron r
5 Hand iron rr
(EN 61121)
6 Machine iron
1)
Laundry / Fabric type
max.
load 1)
Multi-layered fabrics
which would not be
thoroughly dried using
the 2 Normal+
programme.
Mixed loads of cotton
fabrics, e.g. Turkish
towelling and
jerseywear, i.e. single and multi - layer fabrics.
Loads of similar cotton
fabrics (jerseywear,
flannelette sheets,
Turkish towelling).
6 kg
Notes
To prevent shrinkage
do not select the 1
Extra dry programme
for jerseywear.
6 kg
6 kg
Cotton or linen fabrics,
e.g. table linen,
bedding, starched
laundry, etc.
6 kg
Cotton or linen fabrics,
also starched laundry,
for machine ironing.
6 kg
6 kg
Should certain items
still be slightly damp,
select the 1 Extra dry
or 2 Normal +
programmes
If fabrics are too damp
for hand ironing, select
the 4 Hand iron r
programme.
Laundry should be
rolled up to prevent it
from drying out until it
can be ironed.
Weight of dry laundry
11
Programme chart
Programme
Laundry / Fabric type
B MINIMUM IRON
Minimum iron items
7 Normal +
8 Normal
(EN 61121)
9 Hand iron
C Timed drying
0 Cold air
! Hot air
1)
made of synthetics or
blended fabrics, e.g.
pullovers,dresses,
trousers etc., which are
not dried adequately in
the 8 Normal
programme.
Minimum iron shirts,
table cloths, etc., made
of blended fabrics, e.g.
cotton/synthetics.
Minimum iron shirts,
table cloths, etc., made
of blended fabrics, e.g.
cotton/synthetics which
are still to be handironed.
Items which are only to
be aired.
Individual items,
e.g. towels.
Weight of dry laundry
12
max.
load 1)
Notes
3 kg
With blended
fabrics consisting of
wool and
synthetics, consult
the manufacturer’s
instructions, as the
wool component
may cause the
fabric to become
matted.
3 kg
3 kg
6 kg
-
6 kg
-
How to dry correctly
How to dry correctly
1 Prepare the laundry
As far as possible, sort laundry for:
– the type of fibre or weave
Do not overload the drum. Overloading can cause unnecessary wear
and tear to the laundry and give a
disappointing drying result.
– the degree of dryness required,
– similar size of items
– the moisture content after spinning.
This will help towards achieving an
even drying result.
See the programme chart for maximum
loads.
Before closing the door check that
the fluff filter is correctly positioned.
Fasten duvet covers etc. to prevent
small items from being rolled up inside them.
Do up zips and tie fabric belts and
apron strings.
Make sure there is no detergent dispenser ball etc. in with the laundry,
as this could melt and damage the
machine and the laundry.
2 Load the drum
Press the door button a and open
the door.
Load the laundry loosely into the
drum.
Important: Please check that items
of laundry cannot be trapped by the
door, as this will cause damage to
the fabric.
Shut the door with a firm swing.
13
How to dry correctly
3 Select a programme
Turn the programme selector to the
programme required.
Select low temperature L if required.
If the machine is fitted with a coin
mechanism / time counter:
5 At the end of a programme
Turn the programme selector to the
r End position.
Press the door a button to open
the door.
Press the Light n button.
Insert coins or tokens.
Remove the laundry from the dryer.
Remember to empty the coin /
token box regularly, so that it does
not become blocked.
Make sure that the drum is empty.
If items are left in the dryer, they
could be damaged by overdrying
when the dryer is next used.
For further information on operating the
dryer with a coin mechanism / time
counter see “Installation”.
4 Start a programme
Press the Start h button.
If laundry is not taken out of the dryer
at the end of the programme the dryer
will commence an anti-crease phase,
during which the drum rotates at timed
intervals to keep the laundry suspended and reduce the risk of creasing.
After every cycle remove the fluff
from the fluff filter in the door and in
the door opening (see “Cleaning and
Care”). To save both energy and
operation time the fluff filters should
be cleaned after every programme.
Shut the door when you have finished. As a safety precaution do not
leave the door open when not in use.
14
Changing a programme
Changing a programme
To cancel a programme
Turn the programme selector switch
to the r End position.
For safety reasons all programmes
where the residual moisture content is
monitored have a maximum running
time of 240 minutes, after which period
the heater elements are switched off
and the cooling down phase commences.
To select a different programme during drying
Turn the programme selector to the
required programme.
The new programme starts from the beginning.
Adding or removing items
Press the door a button to open
the door.
If the door is opened during drying the
programme will have to be started
again. Take out or add items as required.
Close the door.
Press the Start h button.
The programme selected will then continue from the point it was at when the
door was opened.
The programme is not continued
– if there is a power failure lasting
more than 30 minutes
– if the programme has already
reached the ä cooling down
phase or the ~ r Anti-crease
stage.
15
Cleaning and care
Cleaning and care
Cleaning the fluff filters
The fluff which occurs during drying
is collected in the fluff filters in the
door and in the door opening.
Clean the filters after every programme to reduce drying time and
save energy.
Open the door and pull the fluff filter
up out of the door holder.
Remove the fluff from:
– the filter in the door
– the filters in the door opening
(do not use sharp or pointed objects.).
Remove any fluff from the hollow part
of the door holder through the wide
slit at the bottom.
A cleaning brush is available at extra
cost from the Miele Spare Parts Department.
16
Push the cleaned filter back into the
door holder and close the door.
If there is a great deal of compacted
fluff on the filters, they can be
cleaned under hot running water.
The filter in the door opening should
only be removed for cleaning with
water (see illustration for instructions
on how to remove it).
After cleaning shake any excess
water off the filters.
Dry them carefully and thoroughly.
Replace the filters in the door opening.
Replace the filter in the door, ensuring it is fitted the correct way round
in its holder.
Cleaning and care
Casing and drum
Disconnect the machine from the
mains electricity supply.
Avoid contact of stainless steel surfaces (front, lid, casing) with liquid
cleaning and disinfecting agents
which contain chlorine or sodium hypochlorite. These agents can have
a corrosive effect on stainless steel.
Aggressive vapours containing
chlorine bleach can also be corrosive. Do not store open containers
or these agents near the machine.
Clean the housing and control panel
with a mild detergent or soapy water.
Clean the drum and other stainless
steel parts with a suitable proprietary
stainless steel cleaner following the
manufacturer’s instructions.
Never use abrasive substances, disinfecting agents or solvents. These
could damage the machine because of their chemical content.
The machine must never be hosed
down.
Dry all parts with a soft cloth.
17
Cleaning and care
Heat exchanger
The heat exchanger should be cleaned
at least four times a year.
Turn the cover lock downwards to
the vertical position.
Before cleaning disconnect the
machine from the mains electricity
supply.
To access the heat exchanger:
Pull the cover off.
Remove the service panel below the
machine door.
Turn both levers on the heat exchanger to the vertical position.
18
Cleaning and care
Pull out the heat exchanger.
and along the two long sides.
Wipe the rubber seals at both ends
gently but thoroughly.
Shake any excess water out of the
heat exchanger until no more water
droplets are visible. Then stand the
heat exchanger lengthwise on a
towel until it is quite dry.
Replace the heat exchanger in the
reverse order.
Attempt to pull forward the heat exchanger and the cover to check that
both are firmly positioned, as otherwise water may leak from the machine.
Clean the heat exchanger at both
ends (front and back).
Replace the service panel, fitting it in
first at the bottom and then pressing
it in along the top edge until it engages in position.
19
Problem solving guide
Problem solving guide
What to do if . . . ?
With the help of the following notes minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
Repairs to the machine should only be undertaken by a suitably qualified service engineer to ensure safety. Unauthorised repairs could be dangerous.
Fault
The machine fails to
start when switched on
The progamme has
been interrupted.
Laundry is not sufficiently dried.
20
Possible cause
No obvious cause.
Remedy
Check that
– the door is properly
shut.
– the plug is correctly
inserted in the socket.
– the machine is
switched on at the
mains and the fuse is
not defective.
– Dry small amounts of
laundry using the
Timed Drying C
programme.
The load was too small
or consisted of individual
items which caused the
programme to finish
prematurely.
The load consisted of too – Select a more suitable
many types and
programme next time
thicknesses of fabric.
(see "Programme
overview")
Problem solving guide
Fault
Drying times are
too long.
Possible cause
Remedy
The fluff filters and / or the – Clean as described in
heat exchanger might be
“Cleaning and Care”.
clogged up.
Ventilation to and from
– Open a door or window
the dryer is insufficient
while the machine is
(e.g. in a small room) .
operating to increase air
flow.
The vent below the
– Remove any objects that
door is blocked.
are causing the blockage.
The laundry was not
– Spin the laundry in the
sufficiently spun.
washing machine at the
highest possible speed.
The dryer has been over – Observe the maximum
loaded.
loads for the programme
selected.
– Complete the drying
Metallic components
process using a Timed
e.g. zips have prevented
Drying progamme C .
the dryer from
registering the correct
moisture level in the
laundry.
If after checking all the above, drying times are still too
long, there may be a fault. Contact the Service Dept.
21
Problem solving guide
Fault
The drum door opens
during a programme.
Possible cause
Remedy
The machine has
– Clean the fluff filters
overheated. The
and heat exchanger
temperature limiter opens
as described in
the drum door causing the
"Cleaning and Care".
machine to switch off
automatically.
The fluff filters and/or the
heat exchanger might be
blocked.
If the drum door opens during operation again there
is a technical fault. Contact the Service Dept.
The q indicator light Check to see whether
– Make sure the drain
comes on.
there is a blockage or kink
hose has no
in the drain hose.
restrictions.
– Observe the max.
delivery head.
– Close it correctly. If
After cleaning the heat The cover on the heat
necessary remove it
exchanger, water leaks exchanger has not been
and then replace it.
closed properly.
from the machine.
– Laundry being
Water droplets appear A double filter system
removed from the
with dual insulation
at the upper edge of
prevents fluff from being
machine may come
the drum aperture.
into contact with these
deposited in the heat
water droplets. They
exchanger.
This can lead to the build
will, however, dry off
in a matter of minutes.
up of condensate.
22
Problem solving guide
Fault
There is a build up of
fluff.
Possible cause
Fluff comes off textiles
naturally during wearing
and washing. The fluff that
collects in the filters of a
tumble dryer has no effect
on the lifetime of your
laundry.
Items made of synthetic fibres are
charged with static
electricity after drying.
The interior drum light- The lamp is defective.
ing does not come on
when the n button
is pressed.
Remedy
– Remove any fluff from
the fluff filters (see
“Cleaning and Care”).
– Static charges can be
reduced by adding
liquid fabric
conditioner to the final
rinse of the wash
programme.
– Change the lamp as
described on the next
page.
23
Problem solving guide
To change the lamp
Disconnect the machine from the
mains electricity supply.
To open the door during a
power cut
Open the door.
Pull the door open.
Unscrew the plastic cover inside the
drum, above the door.
The lamp must not exceed the maximum wattage quoted on the data
plate and on the plastic light cover.
The temperature resistant lamp should
be ordered from your Miele Dealer or
the Miele Spare Parts Department only.
Replace the lamp and screw the
plastic cover back on.
The cover must be fixed securely,
as otherwise moisture may seep in
and cause a short circuit.
24
Problem solving guide
Service
In the event of any faults which cannot
be remedied, or if the machine is under
guarantee, please contact
– Your Miele Dealer or
– The nearest Miele Service
Department (see back cover for
address)
When contacting the Service Department, please quote the Model and Serial numbers, both of which are located
on the right hand side below the opening on the drum.
Example:
25
Installation
Installation
View from the front
1 Mains supply socket
3 Control panel
6 External drainage options for
condensed water
(e.g. via wash basin, wash basin
drain outlet, or gulley)
4 Door
7 Hexagon headed nut M 10
5 Service panel
8 Clamp
2 Coin mechanism (optional)
9 Screw, Washer, Plug (8 x 40)
26
Installation
View from the rear
1 Cable connection point for
coin mechanism / time counter
2 a.c. connection cable
(approx. 2 m long)
3 Drain socket for condensed water
4 Four height adjustable screw feet
5 Plinth base if required
- masonry base built on site or
- Miele steel plinth S 5005
available at extra cost
27
Installation
Aligning the machine
The grille below the drum door
should never be blocked, as this
would prevent a sufficient intake of
cold air.
The machine must not be built
under.
Coin mechanism / Time
counter
This dryer can be fitted with a coin
mechanism.*
The machine must be perfectly level to
ensure safe and proper installation.
It can also be connected to an existing
time counter using a special connection cable*.
Do not use devices to turn the machine
off automatically, (e.g. automatic
timers).
The tumble dryer can be combined
with a Miele washing machine in a
washer-dryer stack. For this purpose
the appropriate stacking kit * is required.
* These items are all available from
your Miele Dealer or the Miele Professional Sales Dept.
The screw feet can be adjusted to
compensate for any unevenness in
the floor.
28
Electrical connection
Electrical connection
Electrical connection U.K.
Important
All electrical work should be carried out
only by a suitably qualified and competent person, in strict accordance with
national and local safety regulations.
The wires in the mains lead are coloured in accordance with the following
code:
Ensure power is not supplied to the
appliance while installation work is
being carried out.
The appliance is supplied with a mains
cable and moulded plug for connection
to a 230-240V single phase supply.
The voltage, rated load and fuse rating
are given on the data plate. Please ensure these match the household mains
supply.
Connection should be made via a
fused plug and suitable switched
socket which is easily accessible after
installation.
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA. Do not connect
via an extension lead.
Green/yellow
= earth
Blue
= neutral
Brown
= live
WARNING:
THIS APPLIANCE
MUST BE EARTHED
Where it is necessary to change plugs,
if the colours of the wires in the mains
lead of this appliance do not correspond with the coloured markings
identifying the terminals of your plug,
proceed as follows:
The wire which is coloured green and
yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol z or coloured green, or green and yellow.
The wire which is coloured blue must
be connected to the terminal in the
plug which is marked with the letter N
or coloured black.
The wire which is coloured brown must
be connected to the terminal in the
plug which is marked with the letter L
or coloured red.
29
Electrical connection
Non-rewireable plugs BS 1363
If this machine is fitted with a non-rewireable plug, the following information
applies:
If the socket outlets are not suitable for
the plug supplied with the product, it
must be cut off and an appropriate
plug fitted. The fuse carrier and the
fuse should be removed from the old
plug and disposed of.
The plug cut from the flexible cord
should then be disposed of and on no
account be inserted into any socket
elsewhere in the house (electric shock
hazard).
The fuse cover must be refitted when
changing the fuse, and if the fuse
cover is lost, the plug must not be used
until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured
insert in the base of the plug, or the colour that is embossed in words on the
base of the plug (as applicable to the
design of plug fitted).
Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuse covers
may be purchased from your local electrical supplier or Service agent.
30
External drainage of the condensed water
External drainage of the condensed water
The condensed water can be drained
Connection to wash basin drain outoff directly if the machine is installed
let (where appropriate)
near a sink, drain outlet, gully etc.
Accessories supplied:
–
–
–
–
Drain hose 2 m
Hose clamp
Rubber connection sleeve
Hose clip
Installation
Push the hose clip (1) and the
knurled nut connector from the sink
drain outlet (2) over the drain hose.
Push the sleeve (3) into the hose.
Screw the drain hose to the drain outlet with the knurled nut connector.
Tighten the hose clip up close to the
nut.
Push the drain hose onto the drain
outlet. Make sure that the hose is
firmly secured by the clip and not
kinked.
max. drain hose length: 3.00 meters
max. delivery head: 1.00 meters
The machine is fitted with a non-return
valve as standard to prevent water
from flowing back into the machine.
31
Technical data
Technical data
Height
Width
Depth (incl. distance from the wall)
Weight
Drum volume
Capacity
Voltage
Rated load
Fuse rating
Max. delivery head
Max. drain hose length
Max. load bearing
in operation
Test certificates awarded
Noise level
(according to 3. GSGV)
32
85.0 cm
(adjustable +1/-0.5 cm)
59.5 cm
70.0 cm
60 kg
126 litres
6 kg dry weight
}
see data plate
1.00 m
3.00 m
approx. 72 kg
Radio/TV suppression, (VDE in
Germany)
< 70 dB(A)
33
34
35
Alteration rights reserved/006
This paper consists of cellulose which has been bleached without the use of chlorine.
3499
Download PDF