SignaMax 10/100/1000 to Gigabit SFP Industrial Media Converter User`s guide
SignaMax 065-1896SFPTB is a hardened media converter designed for use in harsh environments, such as industrial shop floors or multi tenant dwellings. It can operate in temperatures ranging from -40°F to +167°F (-40°C to +75°C) and meets NEMA TS1/TS2 environmental requirements for traffic control equipment. It also meets EN61000-6-2 & EN61000-6-3 EMC Generic Standard Immunity for industrial environments.
The 065-1896SFPTB has a variety of features that make it ideal for use in demanding applications. These features include:
- Support for 10/100/1000BaseT/TX and Gigabit SFP socket port media conversion
PDF
Download
Document
Advertisement
Advertisement
Signamax Connectivity Systems Gigabit SFP Converter Series Model - 065-1896SFPTB U S E R ’ S G U I D E Signamax Connectivity Systems Gigabit SFP Converter Series User’s Guide Signamax Gigabit SFP Hardened Media Converter FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Signamax Connectivity Systems from Advanced Electronic Supports Products Inc. All rights reserved. All brand names are registered trademarks of their relative holders. Trademarks Product names mentioned in this manual may be trademarks or registered trademarks of those products and are hereby acknowledged. Ethernet is a trademark of Xerox Corporation. Microsoft Windows is a trademark of Microsoft Corporation. Signamax is a trademark of Advanced Electronic Support Products, Inc. User’s Manual 1 Signamax Gigabit SFP Hardened Media Converter Preface Our hardened media converter provides an affordable solution for rugged environments, transportation road-side cabinets, industrial shop floors, multi tenant dwellings or Fiber To The Home (FTTH) applications. Capable of operating at temperature extremes of -40°F to +167°F (-40°C to +75°C), this is by far the media converter of choice for harsh environments in which space constraints exist. Plug-and-Play Solution: The hardened media converter is a plug-and-play compact media converter which doesn't have any complicated software to set up. This manual describes the installation and use of the hardened media converter with the Link Fault Signaling (LFS) function. The converter also provides one channel media conversion between 10/100/1000BaseT/TX and a Gigabit SFP socket port. The converter is in full compliance with IEEE802.3 10BaseT, IEEE802.3u 100BaseTX, IEEE802.3ab 1000BaseT and IEEE802.3z 1000BaseSX/LX standards. In this manual, you will find: 2 Product overview Features of the media converter Illustrative LED functions Installation instructions Specifications User’s Manual Signamax Gigabit SFP Hardened Media Converter Table of Contents FCC Warning ................................................................................ 1 CE Mark Warning ........................................................................ 1 Trademarks.................................................................................... 1 Preface............................................................................................ 2 Table of Contents .......................................................................... 3 Introduction ................................................................................... 4 Product Overview ........................................................................ 4 Product Features ......................................................................... 4 One-Channel Media Converter.................................................... 7 Ports ............................................................................................ 7 Port Settings ................................................................................ 7 Front Panel & LEDs.................................................................... 8 Installation ..................................................................................... 9 Selecting a Site for the Equipment ............................................... 9 Wiring Diagram........................................................................... 9 DIN Rail Mounting .................................................................... 10 Connecting to Power ................................................................. 11 Specifications ............................................................................... 14 Contact Information.................................................................... 16 Contact Information.................................................................... 16 User’s Manual 3 Signamax Gigabit SFP Hardened Media Converter Introduction The media converter provides one channel for media conversion between 10/100/1000BaseT/TX and a Gigabit SFP socket port with the Link Fault Signaling (LFS) function. This hardened fiber optic solution is perfectly suitable for industrial applications or rugged environmental conditions. Product Overview Product Features 4 Meets NEMA TS1/TS2 environmental requirements such as temperature, shock, and vibration for traffic control equipment. Meets EN61000-6-2 & EN61000-6-3 EMC Generic Standard Immunity for industrial environment. DIP switch configuration for link-fault-pass-through, fiber auto/force mode, and port link down alarm. 4096 MAC addresses, 2.75M bits buffer memory. Supports 802.3/802.3u/802.3ab/802.3z/802.3x. Autonegotiation and Auto MDI/MDIX. SFP socket for Gigabit fiber optic expansion. User’s Manual Signamax Gigabit SFP Hardened Media Converter The Gigabit SFP socket with SFP fiber transceiver should be set to (forced full duplex mode, forced full duplex mode) or (auto mode, auto mode) when two 10/100/1000BaseT/TX and Gigabit SFP socket onechannel media converters are connected to each other via the Gigabit SFP socket with a SFP fiber transceiver. Full wire-speed forwarding rate. Back-pressure & IEEE802.3x compliant flow control. Alarms for power and port link failure by relay output. Relay contact rating with current 1A @ 30VDC, 0.5A @ 120VAC. Operating voltage and Max. current consumption: 1A @ 12VDC, 0.5A @ 24VDC, 0.25A @ 48VDC. Power consumption: 12W Max. Power Supply: Redundant DC Terminal Block power inputs or 12VDC DC JACK with 100-240VAC external power supply. Field Wiring Terminal Markings: Use Copper Conductors Only, 140/167 ℉ (60/75 ℃ ), wire range 12-24 AWG, torque value 7 lb-in. -40℉ to 167℉ (-40℃ to 75℃) operating temperature range. Tested for functional operation @ -40℉ to 185℉ (-40 ℃ to 85 ℃ ). UL508 Industrial Control Equipment certified Maximum Surrounding Air Temperature @ 167 ℉ (75℃). For use in Pollution Degree 2 Environment. Supports DIN-Rail, Panel, or Rack Mounting installation. Front panel status LEDs. <Note> Both of the Gigabit SFP socket with SFP fiber transceiver should be forced to full duplex mode (or auto mode) when two 10/100/1000BaseT/TX and Gigabit SFP socket onechannel media converters are connected to each other via the Gigabit SFP socket with a SFP fiber transceiver. User’s Manual 5 Signamax Gigabit SFP Hardened Media Converter Packing List When you open this product package, you will find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to our authorized reseller. The Media Converter User’s Manual AC to DC Power Adaptor and Power Cable (optional) 6 User’s Manual Signamax Gigabit SFP Hardened Media Converter One-Channel Media Converter Ports This Converter provides one copper port and one Gigabit SFP socket port. The Gigabit SFP socket port is available for options of Multi-mode, Single-mode, or WDM Single-mode SFP fiber transceiver using LC connector. The copper port uses RJ-45 connector, auto-MDIX, and auto negotiates. Port Settings Port settings are made very simple by means of a DIP (Dual Inline Package) switch on the front panel of the hardened media converter. Default DIP switch settings: There are four pins on the DIP switch for port settings. Refer to the table below for more details. DIP switch 0 (OFF) 1 (ON) 1 Disable LFS Enable LFS 2 Disable link down alarm for Enable link down alarm for copper port copper port 3 Disable link down alarm for Enable link down alarm for SFP SFP socket port socket port 4 Enable force mode for SFP Enable auto-negotiation for SFP socket port socket port User’s Manual 7 Signamax Gigabit SFP Hardened Media Converter Front Panel & LEDs The LED indicators give you instant feedback on converter status: LEDs FAULT Power1 Power2 State Steady Off Steady Off Indication Power redundant system or ports function abnormally Power redundant system and ports function normally Power on Power off Power3 LFS Steady Off 1000BaseSX/LX LINK/ACT Steady Flashing LFS function enabled LFS function disabled A valid network connection established for SFP port Transmitting or receiving data ACT stands for Activity Off No valid network connection established for SFP port 10/100/1000BaseTX LINK/ACT Steady A valid network connection established for copper port Flashing Transmitting or receiving data ACT stands for Activity Off No valid network connection established for copper port FDX/COL Steady Connected in full duplex mode Flashing Collision occurred COL stands for Collision Off Connected in half duplex mode 1000 Steady Connected at 1000Mbps Off Not connected at 1000Mbps 100 Steady Connected at 100Mbps Off Connected at 10Mbps 8 User’s Manual Signamax Gigabit SFP Hardened Media Converter Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: The ambient temperature should be between - 40 to 167 degrees Fahrenheit (- 40 to 75 degrees Celsius). The relative humidity should be less than 95 percent, non-condensing. Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards. Make sure that the equipment receives adequate ventilation. Do not block the ventilation holes of the equipment. The power outlet should be within 6 feet (1.8 meters) of the product. Wiring Diagram Field Wiring Terminal Markings: Use Copper Conductors Only, 140/167℉ (60/75℃), wire range 12-24 AWG, torque value 7 lb-in. User’s Manual 9 Signamax Gigabit SFP Hardened Media Converter DIN Rail Mounting • • • 10 Fix the DIN rail attachment plate to the back panel of the media converter. Installation: Place the media converter on the DIN rail from above using the slot. Push the front of the media converter toward the mounting surface until it audibly snaps into place. Removal: Pull out the lower edge and then remove the media converter from the DIN rail. User’s Manual Signamax Gigabit SFP Hardened Media Converter Connecting to Power Redundant DC Terminal Block Power Inputs and 12VDC DC Jack: Redundant DC Terminal Block Power Inputs (preferred connection) There are two pairs of power inputs can be used to power up this device. User’s Manual 11 Signamax Gigabit SFP Hardened Media Converter Step 1: Connect the DC power cord to the plug-able terminal block on the media converter, and then plug it into a standard DC outlet. Step 2: Disconnect the power cord if you want to shut down the media converter. 12VDC DC Jack (not supplied; available separately via special order) Step 1: Connect the AC to DC power adapter to the receptacle on the topside of the media converter. Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a standard AC outlet with the appropriate AC voltage. Alarms for Power and Port Failure Step 1: There are two pins on the terminal block that are used for power failure detection. It provides a normal closed output when the power source is active. Use this as a dry contact application to send a signal for power failure detection. Power Input Assignment Power3 12VDC + 12-48VDC Power2 - Power Ground Power1 + 12-48VDC - Power Ground DC Jack Terminal Block Earth Ground Relay Alarm Assignment *Relay warning signal disable for following: The relay contact closes if Power1 and FAULT Power2 are both failed but Power3 on. The relay contact closes if Power3 is failed but Power1 and Power2 are both on. <Note> The relay output is normal in an open position when there is no power to the media converter. Please do not connect any 12 User’s Manual Signamax Gigabit SFP Hardened Media Converter power source to this terminal to prevent a short circuit to your power supply. User’s Manual 13 Signamax Gigabit SFP Hardened Media Converter Specifications Applicable Standards Fixed Ports Speed 10BaseT 100BaseTX 1000BaseT 1000BaseSX/LX Forwarding rate Cable 1000BaseT 1000BaseSX/LX LED Indicators Dimensions Weight Power Operating Voltage & Max. Current Consumption Power Consumption Operating Temperature Storage Temperature Humidity Safety EMI 14 IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX 1 copper port, 1 Gigabit SFP socket port 10/20Mbps for half/full-duplex 100/200Mbps for half/full-duplex 2000Mbps for full-duplex 2000Mbps for full-duplex 14,880pps for 10Mbps 148,810pps for 100Mbps 1,488,100pps for 1000Mbps 4-pair UTP/STP Cat. 5 up to 328ft. (100m) MMF (50 or 62.5µm), SMF (9 or 10µm) Per Unit: FAULT, Power1, Power2, Power3, LFS Per Port: SFP socket: LINK/ACT Copper: LINK/ACT, FDX/COL, 1000, 100 1.97” (W) x 4.33” (D) x 5.31” (H) (50mm (W) × 110mm (D) x 135mm (H)) 1.76lbs. (0.8Kg) DC Jack: 12VDC, External AC/DC required Terminal Block: 12-48VDC 1A @ 12VDC, 0.5A @ 24VDC, 0.25A @ 48VDC 12W Max. -40℉ ~ 167℉ (-40°C ~ 75°C) Tested for functional operation @ -40℉ ~ 185℉ (-40°C ~ 85°C) UL508 Industrial Control Equipment certified Maximum Surrounding Air Temperature @ 167℉ (75 ) -40℉ ~ 185℉ (-40°C ~ 85°C) 5 ~ 95%, non-condensing UL508 FCC Part 15, Class A VCCI, Class A EN61000-6-3: EN55022, EN61000-3-2, EN61000-3-3 User’s Manual Signamax Gigabit SFP Hardened Media Converter EMS EN61000-6-2: EN61000-4-2 (ESD Standard) EN61000-4-3 (Radiated RFI Standards) EN61000-4-4 (Burst Standards) EN61000-4-5 (Surge Standards) EN61000-4-6 (Induced RFI Standards) EN61000-4-8 (Magnetic Field Standards) Environmental Test IEC60068-2-6 Fc (Vibration Resistance) Compliance IEC60068-2-27 Ea (Shock) IEC60068-2-32 Ed (Free Fall) NEMA TS1/2 Environmental requirements for traffic control equipment User’s Manual 15 Signamax Gigabit SFP Hardened Media Converter Contact Information SIGNAMAX CONNECTIVITY SYSTEMS An AESP Company 16295 N.W. 13h Avenue Miami, Florida 33169, U.S.A. Phone: 305-944-7710 Fax: 305-652-8489 Sales: 800-446-2377 Tech. Support: 800-4462377, ext. 201 Http://www.signamax.com E-mail: [email protected] 16 User’s Manual ">

Public link updated
The public link to your chat has been updated.
Advertisement