PDU2011
AC power supply for
Business-Critical Continuity™
Adaptive power distribution in the data center
A step towards the future with Emerson Network Power
Contents
Server rack power
distribution
Rack PDUs overview ......................................................................................................................... 4
Basic - Managed - Adaptive
Liebert MPXTM....................................................................................................................................... 6
Modular power distribution for server racks
Liebert MPHTM ...................................................................................................................................... 14
Managed Rack PDU with measurement and control function
Accessories and software application ...................................................................................... 18
Knürr DI-Strip®..................................................................................................................................... 20
Basic Rack PDU in three equipment models
Inline Metering System (IMS) ....................................................................................................... 30
Upgrade solution for existing power distributions
Knürr PowerTrans®............................................................................................................................ 34
Power distribution rack for data center
References ............................................................................................................................................. 36
System solutions ................................................................................................................................ 40
Masterguard Trinergy®.................................................................................................................... 44
Highest UPS level of efficiency – up to 99 %
Core competencies ........................................................................................................................... 46
Data center infrastructure ................................................................................................................ 48
Smart Mod ............................................................................................................................................. 50
Container – data center infrastructure
2
Emerson Network Power
Business-Critical Continuity™- so your success continues!
Core competencies:
Q AC Power
Q Connectivity
Q DC Power
Q Embedded Computing
Q Embedded Power
Q Infrastructure Management &
Monitoring
Q Outside Plant
Q Power Switching & Controls
Q Precision Cooling
Q Racks & Integrated Cabinets
Q Services
Q Surge Protection
No company, no matter how big it is,
can afford business-critical system failures.
Over the years we at Emerson Network
Power have acquired unique know-how,
and with our name we represent reliable
rack systems, power supply, precision
cooling, connectivity and integrated
solutions. We can consequently ensure
that you generate optimum benefits
from your technology investments.
Thanks to Emerson Network Power's
technology range and expansive competencies, the entire bandwidth of company-wide solutions is supported for
today's critical business requirements.
Customers all over the world build on our
support for future-proof investments,
because they know that we offer globally
specific innovations and optimized solutions from one single source – supported
by reliable local service and support.
We can ensure the stable operation of
your network infrastructure – regardless
of whether voice, data or multimedia
content are transmitted.
This is based on a proven, comprehensive portfolio of products, services and
systems which supports a multitude of
computing, telecommunications, health
care and industrial applications. This
creates a foundation of trust that is only
possible with a partnership with Emerson Network Power.
Our assignment is to prepare you for the
unknown and the unexpected. We show
you the way against the background of
dynamic changes in your business environment.
And we help you to master the requirements this entails and avail of the
greatest possible benefits from your
technology investments. This is what we
mean by Business-Critical Continuity.
3
Safe, efficient and economical:
Rack PDUs from Emerson Network Power
Reliable power distribution in a server
rack is extremely important! Emerson
Network Power's "Power Distribution
Units (PDU)" provide immense security
and availability with a robust electromechanical setup.
BASIC
PDU product series overview:
Interacting with rack PDUs, rack monitoring
systems and cooling systems, Liebert NFORM
guarantees the monitoring and controlling of
all relevant infrastructure parameters in server
rooms and data centers, alarms as required, and
even intercepts controlling to prevent damages.
4
ADAPTIVE
The rack PDUs provide the perfect
economical solution for every specific
requirement and exceptional efficiency
with numerous technical features.
MANAGED
The rack PDUs ensure a sound economical benefit. The Liebert MPXTM's modularity also enables requirements-oriented
and constantly compatible expansion.
Features:
Q High stability and torsional strength provided with closed sheet
steel extrusions and perfected integration into Knürr rack systems.
Q Best possible conductivity: continuous brass busbars with
many models.
Q Double spring contacts for shock hazard-proof and low contact
resistance.
Additional features:
Q Highest possible security and availability with an operating
temperature of max. 55°C.
Q Extensive measurement functions (power, current, voltage and
energy), with high measurement accuracy of up to ± 1%.
Q Remote-switchable outputs with many models.
Q Same communication cards as with Liebert MPXTM used,
which means same software interface as with administration.
Q Up to 4 Liebert MPXTM/MPHTM can be controlled via one IP
address.
Q External sensors and a display can also be addressed.
Additional features:
Q The Liebert MPXTM is a modular PDU; input modules and
output modules can be flexibly equipped as required.
Q Additional wiring between the modules is not required;
a fixed databus is integrated on a continuous busbar.
Q Highest power density up to max. 3 x 63 A per bar possible.
Q Possible failures can be detected early on with additional monitoring
(N-conductor, apparent power, crest factor and power factor).
Q Depending on the output module measuring and remote
switching is possible up to output level, which allows each server
to be monitored individually.
Q The output modules can be changed during running operation;
there are no downtimes.
Emerson Network Power
Rack PDUs Europe – product series overview
From page 22
Knürr DI-STRIP
BASIC Rack PDU®
From page 16
From page 8
Liebert MPH
MANAGED Rack PDU
Liebert MPXTM
ADAPTIVE Rack PDU
TM
Features
Knürr
DI-STRIP®
Elementary
Knürr
DI-STRIP M®
Knürr
DI-STRIP
RM®
Liebert
MPHTM
Branch
Monitored
Liebert
MPH TM
controlled
Liebert
MPXTM
Elementary
Liebert MPXTM
Elementary
Phase
monitored
Liebert
MPXTM
Branch
monitored
Liebert
MPXTM
Receptacle
managed
Power distribution
x
x
x
x
x
x
x
x
x
x
x
x
Fixed
Fixed
Modular
Modular
Modular
Modular
Modular
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Modular
Display
Remote
interface
x
Measuring
at input level
Measuring per
group
x
Measuring per
output
x
Switching per
output
Measurement
parameters
A
A
A,V,W,KWh,
Hz
A,V,W,KWh,
Hz
x
A,V,W,KWh,
Hz
A,V,W,KWh,
VA, Hz,
Power factor
A,V,W,KWh,
VA, Hz,
Power factor,
crest factor
Input power
1ph + 3ph
max 32A
1ph + 3ph
max 32A
1ph + 3ph
max 32A
1ph + 3ph
max 32A
1ph + 3ph
max 32A
1ph + 3ph
max 63A
1ph + 3ph
max 63A
1ph + 3ph
max 63A
1ph + 3ph
max 63A
Outputs
IEC C13&C19
Schuko
Switzerland
France
IEC C13&C19
Schuko
Switzerland
France
IEC C13&C19
Schuko
Switzerland
France
IEC C13&C19
IEC C13&C19
IEC C13&C19
Schuko
IEC C13&C19
Schuko
IEC C13&C19
Schuko
IEC C13&C19
Schuko
x
x
x
x
x
The Liebert MPXTM and Liebert MPHTM
accessories are largely identical, which
simplifies administration!
INFO
Connection
option for different
sensors
You will find further details and order numbers in our product catalog:
www.emersonnetworkpower-emea.com
5
Liebert MPXTM
Adaptive Rack PDU: Respond
requirement-oriented to every change!
The Liebert MPXTM modular rack PDU
systemTM impressively scores points
with maximum flexibility, highest
possible availability and low operating costs. With Liebert MPXTM users
can react quickly and specifically to
new requirements for rack power
supply and management.
Liebert MPXTM enables users to dimension their rack PDU system so that
current requirements are met first.
The system can be flexibly adjusted
when requirements change later
on. Liebert MPXTM builds on a design
based on a power supply/communication bus and input/output modules.
Status display (RPC-BDM)
Can be easily positioned at the optimum spot for the individual rack; also functions outside the rack. This connected display can be mounted just as the user wishes.
6
Highest possible security and
availability with:
Q Redundant power supply for
control electronics (with redundant
tapping of different phases in the
Power Entry Module).
Q Fixed databus on the busbar (making cable breaks a thing of the
past).
Q Complete data tapping on the
PEM (without additional external
monitoring devices).
Q Additional neutral conductor
measurement.
Q Crest factor measurement (network quality rating, which means
network component failures can be
identified early on).
Maximum flexibility and
scalability with:
Q Configuration of all modules according to their requirements (patented quick fixing for safe installation).
Q One busbar for different
networks and power levels – input
module can be freely address.
Q All other components are "hot
swappable” in running operation.
Q Mobile display for reading all
MPXTM data on the rack.
Q Optical slot space display (easy server slot space identification at the
push of a button).
Highest possible power levels in all
areas with:
Q Power illustration up to 28 kVA per
bar and 55°C ambient temperature.
Q Only one IP address for up to 4 bars
with 24 modules.
Q Plug&Play for numerous sensors.
Q Extensive monitoring with a measuring accuracy of +/- 1% up to output
level.
Q Module and sensor auto-detect function with operating software.
Q Lowest possible Liebert MPXTM system power loss.
Ideal for blade servers and
changing environments
Data centers work more and more with
blade servers and require more processor power on low rack space; cabling
must be simplified; power consumption must be reduced.
With the Liebert MPXTM the data center can quickly react to changes, which
is why our product is the right choice
for you infrastructure's administration.
INPUT POWER
Q Configurable: 20 to 60 A (USA);
16 to 63 A (EU);
Q Single-phase and three-phase
Q Cable routing from above and below
OUTPUT DISTRIBUTOR
Q Scalable, combination-compatible and swappable
during operation
Q Single-phase NEMA 5-20R, IEC-C13, IEC-C19, Schuko
Q Load balance
MODULARITY
Q Input modules
Q Output modules
Q External display
Q External sensors
MONITORING
Q Different levels:
Input level, module level, output level
Q Temperature and humidity
Q Door contacts and floating break input contacts
REMOTE SOCKET CONTROL
Q Socket level
IP
LOCAL MONITORING
Q Display for user
Q Can also be mounted outside the rack
REMOTE MONITORING
Q Secure web and SNMP interfaces
Q Liebert Nform
QAvocent DSView
OVERLOAD PROTECTION
Q Physically and electrically insulated circuit breakers for every socket module
RACK PDU ARRAY™
Q One IP for up to 4 rack PDUs
Q Liebert MPXTM and Liebert MPHTM in
the same private network
FORM FACTOR
Q Vertical mounting (0 U)
Q Fits into trade standard 23/42 U racks and/or
800 mm wide racks
Do you like to be one step ahead of the next
requirement? Liebert MPXTM lets you.
Liebert MPXTM: Four equipment models
for different requirements
The Liebert MPXTM modular rack
PDU consists of various modules. The
foundation stone is a busbar, which
is responsible for the power and
communication distribution to the
individual modules. The input power
is routed via the Liebert MPXTM Power
Entry Module (Liebert MPXTM PEM)
to the Liebert MPXTMsystem. Different output modules (Liebert MPXTM
Branch Receptacle Modules, Liebert
MPXTM BRM) are available according
to requirements. Four different variants can be set up depending on the
equipment:
3. Liebert MPXTM Branch monitored
Modular power distribution with measurement on the input per output module.
An upgrade or downgrade to another line
is possible by equipping with the respective output modules.
1. Liebert MPXTM Elementary
Modular basic power distribution without
measurement and control function. An
upgrade to another equipment model is
no problem!
A combination of the "Elementary Phase
monitored", "Branch monitored" and
"Receptacle managed" lines on a shared
busbar is also possible and is one of
the exceptional features of the Liebert
MPXTM. Interfaces for the network communication, the sensors and/or the local
display are provided by the Liebert Rack
PDU Card (Liebert RPC) in the MPXTM PEM.
The Liebert RPC Card enables connection
to an optional RPC Basic Display Module
(RPC BDM) to display the local status and
alarms.
2. Liebert MPXTM Elementary Phase
monitored
Modular power distribution with measurement on the input. An upgrade
to the next higher line is possible by
equipping with the respective output
modules.
8
4. Liebert MPXTM Receptacle managed
Modular power distribution with measurement on the input per output module
and per output. The individual outputs
can also be switched on and off remotely.
A downgrade to another line is possible
by equipping with the respective output
modules.
Output module
Receptacle Managed
Busbar
(Liebert MPXTM PRC)
Distributes power and
communication signals
to all modules.
Output module
(Liebert MPXTM BRM)
Spacer
for busbar
Fills unused gaps until
Liebert MPXTMmodule is
upgraded.
Output module
E.g. Elementary
(Liebert MPXTM BRM)
Power input module
(Liebert MPXTM PEM)
Routes the input power
and the data (depending
on the module type) to the
busbar system.
Liebert MPXTM,
equipment models in Europe
Four equipment models
Liebert MPXTM
Elementary
Liebert MPXTM
Elementary
Phase monitored
Liebert MPXTM
Branch monitored
Liebert MPXTM
Receptacle managed
Length 1035
MPXPRC-V1035XXX
x
x
x
x
Length 1880
MPXPRC-V1880XXX
x
x
x
x
MPXPEM-EHAEXQ30
x
x
x
x
x
x
x
x
x
x
x
x
x
1ph 32A fixed
3ph 16A fixed
Input modules
3ph 32A fixed
3ph 63A fixed
IEC-C13 L1
Output modules
Elementary
Output modules
Branch monitored
Output modules
Receptacle managed
Sensors
MPXPEM-EHAEXT30
x
MPXPEM-EHAAXT30
MPXPEM-EHAEXR30
x
MPXPEM-EHAAXR30
MPXPEM-EHBEXZ30
x
MPXPEM-EHBAXZ30
MPXBRM-EEBC7N1N
x
x
IEC-C13 L2
MPXBRM-EEBC7N2N
x
x
IEC-C13 L3
MPXBRM-EEBC7N3N
x
x
IEC-C19 L1
MPXBRM-EEBC4O1N
x
x
IEC-C19 L2
MPXBRM-EEBC4O2N
x
x
IEC-C19 L3
MPXBRM-EEBC4O3N
x
x
Schuko L1
MPXBRM-EEBC3P1N
x
x
Schuko L2
MPXBRM-EEBC3P2N
x
x
Schuko L3
MPXBRM-EEBC3P3N
x
x
IEC-C13 L1
MPXBRM-EBBC6N1N
x
IEC-C13 L2
MPXBRM-EBBC6N2N
x
IEC-C13 L3
MPXBRM-EBBC6N3N
x
IEC-C19 L1
MPXBRM-EBBC4O1N
x
IEC-C19 L2
MPXBRM-EBBC4O2N
x
IEC-C19 L3
MPXBRM-EBBC4O3N
x
Schuko L1
MPXBRM-EBBC3P1N
x
Schuko L2
MPXBRM-EBBC3P2N
x
Schuko L3
MPXBRM-EBBC3P3N
x
IEC-C13 L1
MPXBRM-ERBC6N1N
IEC-C13 L2
MPXBRM-ERBC6N2N
IEC-C13 L3
MPXBRM-ERBC6N3N
IEC-C19 L1
MPXBRM-ERBC4O1N
IEC-C19 L2
MPXBRM-ERBC4O2N
IEC-C19 L3
MPXBRM-ERBC4O3N
Schuko L1
MPXBRM-ERBC3P1N
Schuko L2
MPXBRM-ERBC3P2N
Schuko L3
MPXBRM-ERBC3P3N
1xTemp.
SN-Z01
x
x
x
x
x
x
x
x
x
x
x
x
3xTemp.
SN-Z02
x
x
x
3xT. + 1xHum
SN-Z03
x
x
x
x
1xTemp. Mod.
SN-T
x
x
Temp/Hum Mod.
SN-TH
x
x
x
2xDoor Mod.
SN-2D
x
x
x
SN-3C
x
x
x
RPCBDM-1000
x
x
x
3xInput Mod.
Display ext.
MPXPEM-EHAAXQ30
Upgrade possible!
Busbar
Order number
Different combinations possible!
9
Liebert MPXTM
Liebert MPXTM input module/power supply
Elementary and Monitored type:
- The MPX PEM is fixed on the MPX PRC
and provides the connection to the power
supply.
- Cable is connected fixed, 3 m long
- With IEC60309 plug, 1Ph/N/PE 6h blue,
3Ph/N/PE 6h red.
DOS20153
Monitored type:
- The MPX PEM provides the connection
to the databus for the data communication.
- Integrated Liebert RPC-1000 communication
card enables remote monitoring and maintenance of MPX units.
- Provides the following measured values of the
phase inputs: effective power, current, voltage, frequency and consumption.
- Power alarm functions for the individual
phases and their operating status are also
supported.
- Further important features: three displays
inform the user about the current status of
each individual input.
An acoustic alarm is activated with
specific overload conditions.
- The communication card centralizes the
Liebert MPX's local and remote administration.
- There is administration via web and SNMP for
systems connected to the Ethernet.
- Also serves as the connection point for
versatile support options and devices, such
as the display module (RPC BDM), various
sensors and connection to other Liebert MPXTM
or Liebert MPHTM systems, for example.
- Has RJ-45 ports for all connections and does
not require any special cabling.
- Supports 10 and 100 MBit Ethernet and
provides on-site firmware upgrade.
Technical data
Interfaces:
- RJ-45 LAN port (10/100 MBit) – for connecting to the local network (LAN) via an
Ethernet cable.
Dimensions in mm: L = Length, W = Width, H = Height, S = Switch,
n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable
for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of
packaging,
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of your color combination:
.1 = RAL 7035, .6 RAL7035/RAL 2003
10
U
- Expansion/administration port for
local configuration using a computer/
laptop, for setting up a link-up of several
PDUs (Liebert MPXTM or MPHTM).
- Display port for connecting the RPC BDM
(display module).
- External sensor port for connecting
optional sensors.
Supported technologies:
- Web support, provides Liebert MPXTM
control and management. Authorized
users can view status information on their
network.
- SNMP support, provides Liebert MPXTM
SNMP management.
- Easy integration into Liebert Nform,
Avocent DSView and Nagios.
Material/finish
Housing: Aluminum
Cover: Sheet steel
Power contacts: Silvered
Databus contacts: Gilded
(only Monitored type)
Dimensions
Width: 75 mm
Height: 65 mm
Cable: 3 m
Color
Housing: Aluminum/RAL7021 dark gray
Approvals
- CE Symbol in accordance with Low
Voltage Directive, 2006/95/EC
- EMC Directive 2004/108/EC
- BV GS
Supply schedule
1 MPX PEM power input module
incl. connection cable
incl. RPC-1000 communication card
(only Monitored type)
L
W
H
Feed
Load rating
Type
220
75
65
Fixed
230VAC, max 32A
Elementary MPXPEM-EHAEXQ30
Order no.
UP
1 unit
220
75
65
Fixed
230/400VAC, max 16A
Elementary MPXPEM-EHAEXT30
1 unit
220
75
65
Fixed
230/400VAC, max 32A
Elementary MPXPEM-EHAEXR30
1 unit
266
75
65
Fixed
230/400VAC, max 63A
Elementary MPXPEM-EHBEXZ30
1 unit
220
75
65
Fixed
230VAC, max 32A
Monitored
MPXPEM-EHAAXQ30
1 unit
220
75
65
Fixed
230/400VAC, max 16A
Monitored
MPXPEM-EHAAXT30
1 unit
220
75
65
Fixed
230/400VAC, max 32A
Monitored
MPXPEM-EHAAXR30
1 unit
266
75
65
Fixed
230/400VAC, max 63A
Monitored
MPXPEM-EHBAXZ30
1 unit
Liebert MPXTM BRM Output Module
- The MPX BRM takes care of the power distribution to the individual consumers.
- Each module taps a phase; this is color-identified on the module.
- All modules are protected against overload
with a 20A circuit breaker.
- Changing the modules during operation
enables a user-defined installation, without
having to shut down the Liebert MPXTM.
- Up to 3 BRM output modules can be installed
on a 1,035 mm long PRC busbar, and up to
6 can be installed on a 1,880 mm long PRC
busbar.
- The MPX BRMs have an LED-ID indicator,
which clearly identifies every module with a
number.
- The modules are administered in the software.
- Provide the following measured values:
voltage, power, current, apparent power,
kWh, frequency, power factor and crest
factor.
- Power alarm functions and the operating
status are supported.
- The individual outputs can be switched
on and off remotely.
Material/finish
Housing: Aluminum
Cover: Sheet steel
Power contacts: Silvered
Databus contacts: Gilded (type B and
R only)
Type E - Elementary:
- Module for power distribution via respective
outputs.
DOS20153
Type B – Branch monitored:
- Module for power distribution via respective
outputs with measurement function on
module level.
- The MPX BRMs have an LED-ID indicator,
which clearly identifies every module with
a number.
- The modules are administered in the software
- Provide the following measured values:
voltage, power, current, apparent power,
kWh and power factor.
- Power alarm functions and the operating
status are supported.
Dimensions
Width: 75 mm
Height: 65 mm
Color
Housing: Aluminum/RAL7021 dark gray
Approvals
- CE label in accordance with Low Voltage
Directive 2006/95/EC
- EMC Directive 2004/108/EC
- BV GS
Type R – Receptacle managed:
- Module for power distribution via respective
outputs with measurement function on
Module level and output level.
L
n
Outputs
266
7
IEC320
266
7
IEC320
266
7
266
Supply schedule
1 MPXTM BRM Output Module
Load rating
per output
Phase
tapping
Type
Order no.
UP
C13
10A
L1
E
MPXBRM-EEBC7N1N
1 unit
C13
10A
L2
E
MPXBRM-EEBC7N2N
1 unit
IEC320
C13
10A
L3
E
MPXBRM-EEBC7N3N
1 unit
4
IEC320
C19
16A
L1
E
MPXBRM-EEBC4O1N
1 unit
266
4
IEC320
C19
16A
L2
E
MPXBRM-EEBC4O2N
1 unit
266
4
IEC320
C19
16A
L3
E
MPXBRM-EEBC4O3N
1 unit
266
3
Schuko CEE 7/4
16A
L1
E
MPXBRM-EEBC3P1N
1 unit
266
3
Schuko CEE 7/4
16A
L2
E
MPXBRM-EEBC3P2N
1 unit
266
3
Schuko CEE 7/4
16A
L3
E
MPXBRM-EEBC3P3N
1 unit
266
6
IEC320
C13
10A
L1
B
MPXBRM-EBBC6N1N
1 unit
266
6
IEC320
C13
10A
L2
B
MPXBRM-EBBC6N2N
1 unit
266
6
IEC320
C13
10A
L3
B
MPXBRM-EBBC6N3N
1 unit
266
4
IEC320
C19
16A
L1
B
MPXBRM-EBBC4O1N
1 unit
266
4
IEC320
C19
16A
L2
B
MPXBRM-EBBC4O2N
1 unit
266
4
IEC320
C19
16A
L3
B
MPXBRM-EBBC4O3N
1 unit
266
3
Schuko CEE 7/4
16A
L1
B
MPXBRM-EBBC3P1N
1 unit
266
3
Schuko CEE 7/4
16A
L2
B
MPXBRM-EBBC3P2N
1 unit
266
3
Schuko CEE 7/4
16A
L3
B
MPXBRM-EBBC3P3N
1 unit
266
6
IEC320
C13
10A
L1
R
MPXBRM-ERBC6N1N
1 unit
266
6
IEC320
C13
10A
L2
R
MPXBRM-ERBC6N2N
1 unit
266
6
IEC320
C13
10A
L3
R
MPXBRM-ERBC6N3N
1 unit
266
4
IEC320
C19
16A
L1
R
MPXBRM-ERBC4O1N
1 unit
266
4
IEC320
C19
16A
L2
R
MPXBRM-ERBC4O2N
1 unit
266
4
IEC320
C19
16A
L3
R
MPXBRM-ERBC4O3N
1 unit
266
3
Schuko CEE 7/4
16A
L1
R
MPXBRM-ERBC3P1N
1 unit
266
3
Schuko CEE 7/4
16A
L2
R
MPXBRM-ERBC3P2N
1 unit
266
3
Schuko CEE 7/4
16A
L3
R
MPXBRM-ERBC3P3N
1 unit
Liebert MPXTM
Liebert MPXTM PRC - Power Distribution Unit/Communication Bus
- The MPX PRC is the foundation stone of the
Liebert MPX PDU.
- Power and data transfer buses are integrated
fixed over the entire length of the MPX PRC.
- The MPX BRMs (output modules) and the
MPX PEM (Power Entry Module) are fixed on
the MPX PRC and depending on the type
take care of the modules' power feed,
output, monitoring and management.
Supply schedule
1 MPX PRC - Power Distribution Unit/
Communication Bus
1 mounting set
Dimensions
Width: 68 mm
Height: 24 mm
DOS20153
Dimensions in mm: L = Length, W = Width, H = Height, S = Switch,
n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable
for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of
packaging,
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of your color combination:
.1 = RAL 7035, .6 RAL7035/RAL 2003
12
W
Approvals
- CE Symbol in accordance with Low
Voltage Directive, 2006/95/EC
- EMC Directive 2004/108/EC
- BV GS
Load rating
Max. current intensity: 3 x 63 A
Nominal voltage (L-N / L-L): 230 / 400 VAC
Material/finish
Busbar housing: Aluminum
Busbars: Copper
Databus: Gilded
L
Color
Housing: Aluminum
H
U
Model
Order no.
UP
1035 68
24
23
1 PEM + 3 BRM (220mm)
MPXPRC-V1035XXX
1 unit
1880 68
24
42
1 PEM + 6 BRM (220/266mm)
MPXPRC-V1880XXX
1 unit
Liebert MPXTM/MPHTM - Sensors
DOS20153
- The sensors are designed for tool-less
installation in a Knürr Miracel Rack,
but they can also be installed in any other
rack.
- "Fixed" type sensors are fixed to a cable.
- "Modular" type sensors can be connected with
the delivered cable.
- Are affixed to the RPC-1000 communication
card.
- Several sensors can be connected in rows
(max. length: 20 m).
- Are automatically displayed in the
Liebert MPXTM/MPHTM software.
-
Temperature measuring range: 5-55°C
Accuracy: +/- 5%
Humidity measuring range: 10 – 95%
Accuracy: +/- 3.5%
Note
The sensors are not required for operating
the Liebert MPXTM or MPHTM, but they
require the Liebert RPC-1000
(communication card)
Supply schedule
1 sensor with connection cable
Cable length Type
Model
Order no.
UP
3660
Fixed
Single temp. sensor
SN-Z01
1 unit
5180
Fixed
Triple temp. sensor
SN-Z02
1 unit
5180
Fixed
Triple temp. sensor + single humidity
SN-Z03
1 unit
2000
Modular
Single temp. sensor
SN-T
1 unit
2000
Modular
Triple temp. sensor + single humidity
SN-TH
1 unit
2000
Modular
2 x door contact - input module*
SN-2D
1 unit
2000
Modular
3 x digital input
SN-3C
1 unit
* Suitable door contact switch: Order no.: 06.108.115.9
Liebert RPC BDM - 1000 Display Module
DOS20153
- Provides the local display of the monitored
data for all connected Liebert MPXTM and
Liebert MPHTM systems.
- Operated with the aid of a navigation
switch.
- Connected via a cable with the Liebert RPC,
which provides the user the option of
placing the displays where they can be easily
read in accordance with the local space
conditions.
- An individual display can be used for up to
four the Liebert MPXTM Liebert MPHTM PDUs,
which are connected to a PDU array.
L
W
H
U
Model
Note
The Display Module is not required for
operating the Liebert MPXTM or MPHTM, but it
requires the Liebert RPC-1000
(communication card).
Supply schedule
1 RPCBDM-1000 Display Module
1 connection cable, 2 m
1 mounting set
Order no.
UP
RPCBDM-1000
1 unit
13
Liebert MPH TM
Managed Rack PDU: Systems
monitoring and control
Liebert MPHTM Managed Rack PDU is a
power supply system with monitoring
and control functions. The housing consists of a robust sheet steel enclosure,
so that the PDU can be easily installed in
a Knürr rack, or even into other enclosure systems.
The Liebert MPHTM can be installed vertically or horizontally (19"), depending
on the type. The PDU is delivered preinstalled with the same communication
card (RPC-1000) as the Liebert MPXTM.
All Liebert MPXTM external modules can
therefore be connected (e.g. sensors,
display module). Up to four Liebert
MPXTM/MPHTM can be connected as rack
PDU array to consolidate the user's IP
connection and the device monitoring.
Liebert MPHTM is available in two equipment models:
1: Liebert MPHTM Type RM
The Liebert MPHTM Type RM is a monitored PDU that monitors the phase inputs. Measured per phase are:
power, current, voltage and consumption. The current is also monitored per
group (only 32A model). Different threshold values enable detailed alarm signals.
14
2: Liebert MPHTM Type C
The Liebert MPHTM Type C can also
switch the individual outputs on and
off remotely.
Highest possible security and
availability with:
Q Power illustration up to 22 kVA per
PDU and 55°C ambient temperature.
Q N-conductor current display with
3-phase feed, which prevents an
overload on the feed cable.
Q Overload protection can be extended
per group with all 32A models,
minimizes danger with cascaded
PDU overload.
Q Setting alarm threshold values,
which means possible failures are
already identified early on.
Flexibility with:
Q Connection option for an external
display, which can be easily mounted
and also combined with the
Liebert MPXTM.
Q Connection option for external
sensors, which means temperatures
and humidity can be monitored, both
in and outside the rack.
Q Doors and alarm contacts can also be
monitored and displayed via external
input address.
Q Versatile installation in the rack as
19" or space-saving vertical installation.
Q Same, compatible monitoring
platform for Liebert MPHTM and
Liebert MPXTM.
Low operating costs:
Q Rack PDU array setup, which means
up to 4 MPH/MPX can be controlled
with one IP address; the installation is
quicker and easier.
Q Extensive energy and power measurement, which provides data that is
required for maximizing the power
and cooling infrastructure.
Q Special switching technology of the
individual sockets, which reduces the
rack PDU's power loss.
Q Data interface with http and https
protocol; no external software required for configuration and monitoring.
The PDU can, however, also be integrated via SNMP into other management addresses.
INPUT POWER
Q 20 to 30 A (USA);
Q 16 to 32 A (EU);
Q Single-phase and three-phase
OUTPUT DISTRIBUTOR
Q NEMA 5-20R single-phase,
Q IEC-C13 and IEC-C19;
Q combination systems
MODULARITY
Q Communication card
Q External display
Q External sensors
MONITORING
Q Input level
Q Group level depending on type
Q Temperature and humidity
Q Door contacts and floating break
input contacts
REMOTE SOCKET CONTROL
Q Socket level
IP
LOCAL MONITORING
Q Display for user
Q Can also be mounted outside the rack
REMOTE MONITORING
Q Secure web and SNMP interfaces
Q Liebert Nform
Q Avocent DSView
OVERLOAD PROTECTION
Q Circuit breakers for every group
RACK PDU ARRAY™
Q One IP for up to 4 rack PDUs
Q Liebert MPXTM and Liebert MPHTM in the same
private network
FORM FACTOR
Q Vertical mounting (0 U)
Q Rack installation
Q Slimline 0 U form factor for positioning
two PDUs in just one rack
Liebert MPHTM Managed Rack PDU is used
for easy monitoring and controlling of
the power supply in server racks.
Liebert MPHTM
Liebert MPHTM Rack PDU
- The Liebert MPHTM Type RM is a monitored
PDU that monitors the phase inputs.
Measured per phase are: power, current,
voltage and consumption. The current per
group is also monitored (only 32 A version).
- The Liebert MPHTM Type C can also switch
the individual outputs on and off remotely.
- Integrated Liebert RPC-1000 communication
card enables remote monitoring and maintenance of MPH units.
- The RPC-1000 enables the interconnection of
several MPH or MPX units and the connection of
Liebert MPHTM with the Liebert MPXTM units for
monitoring and administration.
- The Liebert MPHTM can be monitored directly
on-site with the RPC BDM-1000, an optional
display module that is connected directly with
the communication card.
- The monitoring unit can be flexibly mounted on
the rack.
L
DOS20153
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of your color combination:
.1 = RAL 7035, .6 RAL7035/RAL 2003
16
Input plug
Dimensions
Width: 50 mm (vertical), 483 mm (19”)
Height: 80 mm (vertical), 44 mm (19”)
Color
Housing: RAL7021 dark gray
Approvals
- CE Symbol in accordance with Low
Voltage Directive, 2006/95/EC
- EMC Directive 2004/108/EC
- GS
Supply schedule
1 Liebert MPHTM Socket Strip (PDU)
1 mounting brackets
incl. RPC-1000 communication card
Outputs IEC320
Order no.
UP
438* RM
230Vac, 16A
IEC320-Sheet I
9xC13
MPH-EBR09NXXO30
1 unit
438* RM
230Vac, 32A
IEC60309 1ph/N/PE 6h
9xC13
MPH-EBR09NXXQ30
1 unit
1730 RM
230Vac, 16A
IEC320-Sheet I
27xC13
MPH-EBV27NXXO30
1 unit
1730 RM
230Vac, 16A
IEC320-Sheet I
21xC13/6xC19
MPH-EBV27NOXO30
1 unit
1730 RM
230Vac, 32A
IEC60309 1ph/N/PE 6h
21xC13/6xC19
MPH-EBV27NOXQ30
1 unit
1730 RM
230Vac, 32A
IEC60309 1ph/N/PE 6h
27xC13
MPH-EBV27NXXQ30
1 unit
1730 RM
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
27xC13
MPH-EBV27NXXR30
1 unit
1730 RM
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
21xC13/6xC19
MPH-EBV27NOXR30
1 unit
438* C
230Vac, 16A
IEC320-Sheet I
9xC13
MPH-ECR09NXXO30
1 unit
438* C
230Vac, 32A
IEC60309 1ph/N/PE 6h
9xC13
MPH-ECR09NXXQ30
1 unit
1730 C
230Vac, 16A
IEC320-Sheet I
27xC13
MPH-ECV27NXXO30
1 unit
1730 C
230Vac, 16A
IEC320-Sheet I
21xC13/6xC19
MPH-ECV27NOXO30
1 unit
1730 C
230Vac, 32A
IEC60309 1ph/N/PE 6h
21xC13/6xC19
MPH-ECV27NOXQ30
1 unit
1730 C
230Vac, 32A
IEC60309 1ph/N/PE 6h
27xC13
MPH-ECV27NXXQ30
1 unit
1730 C
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
27xC13
MPH-ECV27NXXR30
1 unit
1730 C
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
21xC13/ 6xC19
MPH-ECV27NOXR30
1 unit
* (19”)
Dimensions in mm: L = Length, W = Width, H = Height, S = Switch,
n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable
for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of
packaging,
Type Input values
Material/finish
Housing: Sheet steel extrusion
Liebert MPXTM/MPHTM - Sensors
DOS20153
- The sensors are designed for tool-less installation in a Knürr Miracel Rack, but they can also
be installed in any other rack.
- "Fixed" type sensors are fixed to a cable.
- "Modular" type sensors can be connected with
the delivered cable.
- Are affixed to the RPC-1000 communication
card.
- Several sensors can be connected in rows
(max. length: 20 m).
- Are automatically displayed in the
Liebert MPXTM/MPHTM software.
- Temperature measuring range: 5-55°C
- Accuracy: +/- 5%
- Humidity measuring range: 10 – 95%
- Accuracy: +/- 3.5%
Note
The sensors are not required for operating
the Liebert MPXTM or MPHTM, but they
require the Liebert RPC-1000
(communication card)
Supply schedule
1 sensor with connection cable
Operating instructions
Cable length Type
Model
Order no.
UP
3660
Fixed
Single temp. sensor
SN-Z01
1 unit
5180
Fixed
Triple temp. sensor
SN-Z02
1 unit
5180
Fixed
Triple temp. sensor + single humidity
SN-Z03
1 unit
2000
Modular
Single temp. sensor
SN-T
1 unit
2000
Modular
Triple temp. sensor + single humidity
SN-TH
1 unit
2000
Modular
2 x door contact - input module*
SN-2D
1 unit
2000
Modular
3 x digital input
SN-3C
1 unit
* Suitable door contact switch: Order no.: 06.108.115.9
Liebert RPC BDM - 1000 Display Module
DOS20153
- Provides the local display of the monitored
data for all connected Liebert MPXTM and
Liebert MPHTM systems.
- Operated with the aid of a navigation
switch.
- Connected via a cable with the Liebert RPC,
which provides the user the option of
placing the displays where they can be easily
read in accordance with the local space.
- An individual display can be used for up to
four the Liebert MPXTM Liebert MPHTM PDUs,
which are connected to a PDU array.
L
W
H
U
Model
Note
The Display Module is not required for
operating the Liebert MPXTM or MPHTM, but it
requires the Liebert RPC-1000
(communication card)
Supply schedule
1 RPCBDM-1000 Display Module
1 connection cable, 2 m
1 mounting set
Operating instructions
Order no.
UP
RPCBDM-1000
1 unit
17
Accessories and software application,
Liebert MPXTM and Liebert MPHTM
Infrastructure management
Secure web and SNMP interfaces
QUser-configured alarm threshold
(3 threshold values per measuring
point).
QSocket status and delayed switching.
QElectrical measurement: V, A, kW
and kW/h, power factor, Hz,
Crest factor.
QRack PDU array: equipment consolidation.
QPDU Explorer: intuitive hierarchical
interface.
QPDU status display according to strip
or socket.
QDevice Explorer: search according to
user-defined device names.
QEnvironment monitoring: tempera ture and humidity, floating contacts.
Liebert Nform
QControl technology for Liebert devices
in the LAN.
Q E-mail alarm and local notifications.
Q Scalable software solution for the
IT environment.
Avocent DSView
QAlarm and incident administration of
all equipment at the site.
Q Control technology in real-time.
Q Individually adjustable user interface.
Q Trend and alarm reports.
Web-based monitoring
QPDU parameters monitoring
via the web browser.
Q No application-specific software
required.
Q Simultaneous display of up to 4 PDUs.
Network management system
Q Open standard solution.
Q For all SNMP devices.
Q Scalable software solution for
all company sizes.
Optional hardware
Local display module – RPC-BDM
Q Electrical and ambient parameters.
Q 1 RPC-BDM for up to 4 PDUs in the array.
Q PDU Explorer.
Q Device Explorer.
18
Liebert SN product family: Rack Sensors
Q Temperature measurement with
single or multiple sensors.
Q Temperature and humidity measurement with multiple sensors.
Q Door contact sensors and floating
input contacts.
Flexible power distribution
Easy integration of the rack PDUs into new or existing management platforms
Rack PDU array (up to four systems)
19
Knürr DI-STRIP ®
Basic Rack PDU: Robust PDUs with
helpful equipment features
Knürr's Basic Rack PDUs are the solution for every data center looking for
robust, economical and flexible rack
concepts.
For power distribution the Knürr
DI-STRIP® product family meets the
requirements of numerous IT applications and other areas. Specially
configured for the growing number
of electronic components in network
switching racks of server racks. Available with different accessories, such
as circuit breakers, surge protection,
mains filter, master-slave function,
emergency off button, fault current
circuit breaker, local and remote
power measurement, for example.
Highest possible security and
availability with:
Q Closed sheet steel extrusion, which
means high stability and torsional
strength.
Q Extensive certification in acc. with
international standard.
Q Double spring contacts for shock
hazard-proof and low contact
resistance.
Q Unbalanced load monitoring
with 3-phase feed prevents overload
on the feed cable (only DI-STRIP
versions M and RM).
Q Optimum load monitoring with
installation of the servers (only
DI-STRIP versions M and RM).
Q Individual outputs backup with
the DI-STRIP BladePower and Pizza
Power.
Maximum flexibility with:
Q Configurations and options
with international compatibility.
All DI-STRIP M / RM with display rotation
for better reading.
20
Q 2.5 m or 4 m long mains cable
for more spatial flexibility.
Q Rotating display in 90° steps (only
DI-STRIP versions M and RM).
Q Tool-less installation, which means
quick and easy extension in the rack
(only DI-STRIP HighPower).
Extremely low operating costs
with:
Q Quick and easy installation on the
rack requires minimum space and
shorter installation time.
Q Automatic background light reduction extends the display's service
life and reduces the rack PDU power
loss (only DI-STRIP models M and
RM).
Q Especially flat housing extrusion,
providing full accessibility to the
19" level with 600 mm wide server
racks.
INPUT POWER
Q Single-phase or three-phase
Q Up to 22 kVa
Q Easy input supply
OUTPUT DISTRIBUTOR
Q NEMA 5-20R single-phase, IEC-C13 and C19,
combination systems
Q Schuko, France, Switzerland
MODULARITY
Q More connectivity with
expansion unit for
Basic Rack PDU GST18-PDUs
FORM FACTOR
Q Vertical mounting (0 U)
Q Rack installation
LOCAL MONITORING
Q Fixed display
REMOTE MONITORING
Q Secure web and SNMP interfaces
Liebert Nform
OVERLOAD PROTECTION
Q Circuit breakers/fuses per branching
cable/output as required
®
WennDI-STRIP
Ihre Schachzüge
berechenbar
sind,
Knürr
– equipped
for operational
®
erhalten Sie die
Flexibilität
DI-STRIP
.
reliability
with mit
all certifi
cates.
Knürr DI-STRIP ®:
Three equipment models for
precisely your requirements
Knürr DI-STRIP® Elementary:
Basic Rack PDU, Knürr DI-Strip
Elementary® for simple power distribution requirements. The PDUs
are available in different structures,
depending on the rack installation
requirements. Additional functions
such as surge protection, mains filter,
master-slave function, emergency
off button and fault current circuit
breaker are also possible.
All DI-STRIP HighPower are equipped with especially flat
housing extrusions and side cable entry. This enables
installation without any loss of usable height units and
cable entry from above and below. Full accessibility
to the 19" level with 600 mm wide server racks is also
a given.
22
Knürr DI-STRIP M® – local metered:
Basic Rack PDU Knürr DI-STRIP M® for
simple power distribution requirements and local power measurement
for your data center. Available in
single and three-phase versions up to
22 kVa, with and without power measurement. Local power measurement
module features:
Local power measurement features:
Q M = power measurement (local).
Q Tried, tested and proven DI-STRIP®
PDU with integrated local power
measurement module.
Q Large transparent LCD display.
Q Meets the strictest EMC requirements
with radiation and irradiation interference.
Q Integrated unbalanced load monitoring with three-phase feed.
Q Rotatable displays in 90° steps.
Q Automatic background light
reduction.
Q Optimum load monitoring with
installation of the servers.
Knürr DI-STRIP RM® – remote metered:
Basic Rack PDU Knürr DI-STRIP RM®
for simple power distribution requirements and remote power measurement for your data center. Available in
single and three-phase versions up to
22 kVa, with local and remote power
measurement. Knürr DI-STRIP RM®
provides safe and reliable power supply in a robust, extruded enclosure.
Remote power measurement module
features:
Q RM = power measurement (remote)
Tried, tested and proven DI-STRIP®
PDU with integrated power measurement module with remote monitoring.
Q Large transparent LCD display.
Q Meets the highest EMC requirements
with radiation and irradiation interference.
Q Can be set for up to 3 threshold values and unbalanced load monitoring.
Q Rotatable displays in 90° steps.
Q Automatic background light
reduction.
Q Protocols: HTTP, SNMP, Syslog.
Knürr DI-Strip®,
equipment models in Europe
Full overview:
1
Knürr DI-STRIP®- Equipment models
Options
Input power
Outputs
Knürr DI-Strip
Elementary®
Knürr DI-Strip M®
local metered
Knürr DI-Strip RM®
remote metered
1
Euro Plug
System IEC 320
1x16A
up to 3.68kVA
IEC60320
C13 & C19
x
x
x
1
Classic
1x16A
up to 3.68kVA
Schuko, France,
Switzerland
x
1
Compact
1x16A
up to 3.68kVA
Schuko, France,
Switzerland
x
x
x
1
Protector FI
1x16A
up to 3.68kVA
Schuko, France,
Switzerland
x
1
Protector LS
1x16A
up to 3.68kVA
Schuko, France,
Switzerland
x
Example: Model
1
Protector FI / LS
1x16A
up to 3.68kVA
Schuko, France,
Switzerland
x
2
1
Protector Emergency STOP
1x16A
up to 3.68kVA
Schuko, France
x
1
Protector Emergency STOP FI/LS
1x16A
up to 3.68kVA
Schuko, France
x
1
Power Cleaner
1x16A
up to 3.68kVA
Schuko, France
x
1
Safety Basic
1x16A
up to 3.68kVA
Schuko, France,
Switzerland
x
1
Safety Standard
1x16A
up to 3.68kVA
Schuko, France,
Switzerland
x
1
Master Slave
1x16A
up to 3.68kVA
Schuko, France
x
1
Combi
1x16A
up to 3.68kVA
Schuko, France
x
1
GST18 Plug
System
1x16A, 3x16A
up to 11kVA
Schuko, France
IEC60320
x
x
x
1
TriplePower
3x16A
up to 11kVA
IEC60320
C13 & C19
Schuko
x
x
x
2
BladePower
1x32A, 3x32A
up to 22kVA
IEC60320
C13 & C19
x
2
PizzaPower
1x32A, 3x32A
up to 22kVA
IEC60320
C13 & C19
Schuko
x
x
x
3
HighPower
1x32A, 3x32A
up to 22kVA
IEC60320
C13 & C19
x
Example: Model
3
x
Example: Model
23
Knürr DI-Strip® – for server applications
Knürr DI-STRIP® HighPower
DOS20153
L
Type
Input values
- Flat design provides access to the 19" level,
even with 600 mm wide racks.
- Individual backup for outputs (groups with
10 A).
- Outputs divided into groups with max. 20 A
per group.
- Modular expansion in the rack with tool-less
PDU installation.
Material/finish
Housing: Sheet steel, zinc-passivated,
powder-coated
Additional function for HighPower RM type
(remote metered).
- With big transparent LCD display.
- Effective value display of alternating
power input.
- LCD display rotation in 90° steps.
- Display can be switched bright or dark.
- Load changes signaling.
- Automatic background light reduction.
- Technical description for data interface
(see DI-STRIP RM).
Color
Housing: RAL 9005 black
Input plug
Dimensions
Width: 134 mm
Height: 47 mm
Cable: 3 m
Approvals
- CE Symbol in accordance with Low
Voltage Directive 2006/95/EC
- EMC Directive 2004/108/EC
- GS
Supply schedule
1 socket strip (PDU)
1 integrated remote ampere meter
(only HighPower RM)
2 mounting brackets
Operating instructions
Outputs IEC60320
C13
C19
Order no.
UP
Schuko
540
DI-STRIP® HighPower
230Vac, 32A
IEC60309 1ph/N/PE 6h
20
4
03.632.100.8
1 unit
850
DI-STRIP® HighPower
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
6
12
03.632.102.8
1 unit
540
DI-STRIP® HighPower RM
230Vac, 32A
IEC60309 1ph/N/PE 6h
20
4
03.632.200.8
1 unit
850
DI-STRIP® HighPower RM
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
6
12
03.632.202.8
1 unit
Dimensions in mm: L = Length, W = Width, H = Height, S = Switch,
n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable
for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of
packaging,
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of your color combination:
.1 = RAL 7035, .6 RAL7035/RAL 2003
24
DI-STRIP® TriplePower® Euro Socket System IEC 320
with cable
- Cable: H05VV-F 3G 2.5 mm2.
- Cable: 2.5 m
(optional with IEC60309 plug, 3Ph/N/PE 6h).
- Easy mounting on the rack extrusion.
- 3x16A feed as standard.
- Ideal for providing redundancies
(e. g. 96 A with redundant feed).
- Unmistakable phase assignment color-coding.
- Optimum distribution over the entire
rack height (23 U or 41 U).
- Alternative to 3-phase GST18 system
(see page 170).
DOS20126
Material/finish
Housing: Closed sheet steel extrusion, zincpassivated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Height: 45.5 mm
Housing width: 44.4 mm (= 1 U)
L
S
n
F1
19”
Input values
Input plug
1033
24
48
1033
24
1833
48
1133
24
1733
42
483
6
…
…
…
…
…
…
… …
Color
Housing: RAL7035 light gray
Plastic parts: RAL7021 dark gray
Load rating
100-240/173-415 Vac
Input: 3x 16 A
Output: 10A (C13)
Output: 16 A (C19)
Approval symbols for IEC 320 3-way
Euro combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
Outputs IEC60320
C13
1833
Approvals/certificates
- CE label in accordance with Low Voltage
Directive 2006/95/EC
- EMC Directive 2004/108/EC
- BV GS, CSA NRTL/C, CB-scheme
Order no.
UP
C19
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
24
03.600.024.1
1 unit
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
48
03.600.048.1
1 unit
230/400Vac, 16A
Open end
24
03.600.824.1
1 unit
230/400Vac, 16A
Open end
48
03.600.848.1
1 unit
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
18
03.600.524.1
1 unit
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
36
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
6
6
03.600.542.1
1 unit
6
03.600.506.1
1 unit
Knürr DI-STRIP® BladePower®
Technical data
DOS20153
- EC 320 sockets (10 A and 16 A).
- Individually fused via thermal circuit breaker
that can be reset in acc. with IEC60934.
- Cable: H05VV-F 3G 4 mm2.
- Cable: 4 m.
- With IEC60309 plug, 1Ph/N/PE 6h blue,
3Ph/N/PE 6h red.
Approvals
- CE label in accordance with Low Voltage
Directive 2006/95/EC
- EMC Directive 2004/108/EC
- Innova GS
- CSA NRTL/C (only without plug)
Load rating
100-240 / 173-415 Vac
Input: 1x32 A oder 3x32 A
Output: 10 A / 16 A
Material / Surface
Housing: Sheet steel, zinc-passivated,
powder-coated
Dimensions
Height: approx. 60 mm
Housing width: 84 mm
Supply schedule
1 socket strip (PDU)
2 mounting brackets
1 19” mounting bracket
(additional with 19 installation option)
Operating instructions
Color
Housing: RAL 9005 black
DOS20155
L
375
S
n
F1
5
… … …
…
…
… …
…
740
15
375
5
740
15
19”
Plug
Model
Order no.
UP
BladePower® PDU 1x 32 A
03.630.005.1
1 unit
BladePower® PDU 3x 32 A
03.630.015.1
1 unit
BladePower® PDU 1x 32 A
03.630.805.1
1 unit
BladePower® PDU 3x 32 A
03.630.815.1
1 unit
25
Knürr DI-Strip® – for server applications
Knürr DI-STRIP® PizzaPower®
Technical data
- Individually fused via thermal circuit breaker
that can be reset in acc. with IEC60934.
- Cable: H05VV-F 3G 4 mm2.
- Cable: 4 m.
- With IEC60309 plug, 1Ph/N/PE 6h blue,
3Ph/N/PE 6h red.
DOS20158
Material/finish
Housing: Sheet steel, zinc-passivated,
powder-coated
Dimension
Height: approx. 60 mm
Housing width: 84 mm
Height with cable: approx. 176 mm
Color
Housing: RAL 9005 black
DOS20159
L
S
n
F1
19”
Input values
Input plug
Outputs IEC60320
C13
400
7
400
7
720
16
960
24
1017
25
933
21
933
21
408
6
939
21
1362
36
1002
24
…
…
…
…
…
…
…
…
…
…
…
Supply schedule
1 socket strip (PDU)
2 mounting brackets
1 19” mounting bracket
(additional with 19 installation option)
Operating instructions
Order no.
UP
1 unit
C19
IEC60309 1ph/N/PE 6h
7
03.631.007.1
230Vac, 32A
Open end
7
03.631.807.1
1 unit
230Vac, 32A
IEC60309 1ph/N/PE 6h
12
4
03.631.124.1
1 unit
03.631.240.1
1 unit
4
03.631.214.1
1 unit
1 unit
230Vac, 32A
IEC60309 1ph/N/PE 6h
24
230Vac, 32A
IEC60309 1ph/N/PE 6h
21
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
21
03.631.021.1
230/400Vac, 32A
Open end
21
03.631.821.1
1 unit
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
6
03.631.006.1
1 unit
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
9
12
03.631.912.1
1 unit
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
36
03.631.360.1
1 unit
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
18
03.631.186.1
1 unit
= Express item
1 kg = 2.2046 pound
Replace .x with the number of your color combination:
.1 = RAL 7035, .6 RAL7035/RAL 2003
26
Load rating
100-240 / 173-415 Vac
Input: 1x32 A or 3x32 A
Output: 10A (C13)
Output: 16 A (C19)
230Vac, 32A
Dimensions in mm: L = Length, W = Width, H = Height, S = Switch,
n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable
for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of
packaging,
Conversion: 1 mm = 0.03937 inch
Approvals
- CE Symbol in accordance with Low
Voltage
Directive, 2006/95/EC
- EMC Directive 2004/108/EC
- BV GS
- CSA NRTL/C (only without plug)
6
Knürr DI-STRIP® Euro Socket System, IEC 320
with cable and right angle plug
DOS20062
-
Optionally with lit switch, 2-pole switching.
19” installation option.
With Euro combinations of IEC 320 sockets .
Cable: H05VV-F 3G 1.5 mm2.
Cable: 2.5 m.
Without fusing.
- EMC Directive 2004/108/EC
- Innova-GS
- CB-scheme
Color
Housing: RAL 7035 light gray
Plastic parts: RAL 7021 dark gray
Material/finish
Housing: Closed sheet steel extrusion, zincpassivated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
DOS00498
Load rating
250 Vac/10 A, Sheet F
250 Vac/16 A, Sheet J
Approval symbols for IEC 320 3-way
Euro combinations
VDE, UR, CSA
Dimensions
Height: 45.5 mm
Housing width: 44.4 mm (= 1 U)
Supply schedule
1 socket strip
2 mounting brackets
Approvals/certificates
- CE label in accordance with Low Voltage
Directive 2006/95/EC
L
S
n
F1
6
…
…
…
…
…
19”
Input values
Input plug
Output
Sheet F Sheet J
Order no.
UP
230Vac, 16A
Schuko CEE7
6
03.600.006.1
1 unit
230Vac, 16A
Schuko CEE7
9
03.602.009.1
1 unit
230Vac, 10A
ICE60320 Sheet E
12
03.600.312.1
1 unit
230Vac, 16A
ICE60320 Sheet I
15
3
03.600.418.1
1 unit
230Vac, 16A
ICE60309 1ph/N/PE 6h 15
3
03.600.518.1
1 unit
DOS20042
333
383
…
9
483
12
783
18
783
18
…
…
27
Knürr DI-Strip® – for server applications
Knürr DI-STRIP® M
- With big transparent LCD display.
- Effective value display of alternating currents
per phase (1-phase or 3-phase, depending on
model).
- LCD display rotation in 90° steps.
- Display can be switched bright or dark.
- Unbalanced-load warning display with
3-phase model.
- Load changes signaling.
- Automatic background light reduction.
- Cable: 4m H05VV—F 5 G 4mm
(PizzaPower M).
- Cable: 2.5m H05VV-F 5 G 2.5mm
(TriplePower M).
- Cable: 2.5m H05VV-F 3G 1.5mm
(DI-STRIP Compact M, DI-STRIP IEC320 M).
DOS80002
Approvals
- CE label in accordance with Low Voltage
Directive 2006/95/EC
- EMC Directive 2004/108/EC
- GS
Color
PizzaPower M model:
Housing: RAL 9005 black
Other models:
Housing: RAL 7035 light gray
Plastic parts: RAL 7021 dark gray
Supply schedule
1 socket strip with ampere meter
2 mounting brackets
2 19” mounting brackets (with
19” installation option)
Material/finish
PizzaPower® model:
Housing: Sheet steel, zinc-passivated,
powder-coated
Other models:
Housing: Closed sheet steel extrusion,
zinc-passivated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
L
Type
Input values
Input plug
Note
- Other models (e.g. Sheet J outputs)
on request
Outputs IEC60320
C13
C19
Order no.
UP
Schuko
483
DI-STRIP® PizzaPower® M
230Vac, 32A
IEC60309 1ph/N/PE 6h
7
03.636.007.1
1 unit
933
DI-STRIP® PizzaPower® M
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
21
03.636.021.1
1 unit
1033 DI-STRIP® TriplePower® M
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
21
03.606.821.1
1 unit
1833 DI-STRIP® TriplePower® M
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
45
03.606.845.1
1 unit
1133 DI-STRIP® TriplePower® M
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
18
6
03.606.824.1
1 unit
1733 DI-STRIP® TriplePower® M
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
36
6
03.606.842.1
1 unit
483
DI-STRIP® Compact M
230Vac, 16A
Schuko
483
DI-STRIP® IEC320 M
230/400Vac, 16A
Schuko
233
DI-STRIP® Ampermeter
230/400Vac, 16A
GST18
Dimensions in mm: L = Length, W = Width, H = Height, S = Switch,
n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable
for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of
packaging,
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of your color combination:
.1 = RAL 7035, .6 RAL7035/RAL 2003
28
6
9
03.306.006.1
1 unit
03.606.009.1
1 unit
03.606.200.1
1 unit
Knürr DI-STRIP® RM
- Real RMS value display for the
alternating current per phase.
- LCD display rotation in 90° steps.
- Display bright/dark switchover.
- Warning display for unbalanced load.
- Load changes signaling.
- Automatic background light dimming.
DOS80002
Material/finish
- PizzaPower model:
Housing: Sheet steel, zinc-passivated,
powder-coated
- Other models:
Housing: Closed sheet steel extrusion,
zinc-passivated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO
(UL94), recyclable
Data interface:
- The plug strip can be integrated into the
network via an RJ45 plug.
- Access is possible without special software
via a remote browser.
- Three variable limit values and a warning for
unbalanced loads can be specified.
- The module enables access for up to 5 users
or administrators; access is passwordprotected.
- The software displays the name and place of
the PDU; this information can be entered by
an administrator.
- The user can specify a static IP address or
access using DHCP.
- Firmware updates can be made via a
browser.
- Supported protocols: HTTP, SNMP (Traps,
SET, GET), Syslog.
Dimensions
Width: 84 mm (PizzaPower), 44.4 mm
(other)
Height: 60 mm (PizzaPower), 44.4 mm
(other)
Color
PizzaPower model:
Housing: RAL 9005 black
Other models:
Housing: RAL 7035 light gray
Plastic parts: RAL 7021 dark gray
Approvals
- CE label in accordance with Low Voltage
Directive 2006/95/EC
- EMC Directive 2004/108/EC
- GS
Supply schedule
1 socket strip (PDU) with remote
ampere meter
1 mounting brackets
Operating instructions
L
Type
Input values
Input plug
Outputs IEC60320
C13
733
DI-STRIP® Compact RM 8
C19
Order no.
UP
Schuko
230Vac, 16A
Schuko CEE 7/4
8
03.307.008.1
1 unit
1183 DI-STRIP® Compact RM 17
230Vac, 16A
Schuko CEE 7/4
17
03.307.017.1
1 unit
633
IEC320 RM9
230Vac, 16A
Schuko CEE 7/4
9
03.607.009.1
1 unit
933
IEC320 RM18
230Vac, 16A
Schuko CEE 7/4
18
03.607.018.1
1 unit
1133 DI-STRIP® TriplePower RM
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
18
03.607.825.1
1 unit
1833 DI-STRIP® TriplePower RM
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
45
03.607.845.1
1 unit
1233 DI-STRIP® TriplePower RM
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
18
6
03.607.824.1
1 unit
1833 DI-STRIP® TriplePower RM
230/400Vac, 16A
IEC60309 3ph/N/PE 6h
36
6
03.607.842.1
1 unit
1111 DI-STRIP® PizzaPower® RM
230Vac, 32A
IEC60309 1ph/N/PE 6h
24
03.637.023.1
1 unit
871
DI-STRIP® PizzaPower® RM
230Vac, 32A
IEC60309 1ph/N/PE 6h
12
4
03.637.016.1
1 unit
1168 DI-STRIP® PizzaPower® RM
230Vac, 32A
IEC60309 1ph/N/PE 6h
21
4
03.637.025.1
1 unit
563
DI-STRIP® PizzaPower® RM
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
6
03.637.006.1
1 unit
995
12
03.637.018.1
1 unit
03.637.021.1
1 unit
DI-STRIP® PizzaPower® RM
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
6
1022 DI-STRIP® PizzaPower® RM
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
21
1157 DI-STRIP® PizzaPower® RM
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
18
6
03.637.024.1
1 unit
1751 DI-STRIP® PizzaPower® RM
230/400Vac, 32A
IEC60309 3ph/N/PE 6h
36
6
03.637.042.1
1 unit
29
Inline Metering System (IMS) –
Optimum upgrade solution for
existing installations
Knürr DI-STRIP IMS
IMS model series overview:
Features:
Q Liebert Rack PDUs familiar software interface, as the same
communication card as with Liebert MPXTM/MPHTM is used.
Q Highest possible security and availability with an operating temperature
of max. 55°C.
Q Extensive measurement functions (power, current, voltage and energy),
with high measurement accuracy of up to ± -1%.
Q An N-conductor overload with 3-phase systems can be prevented,
as the N-conductor current is monitored.
Q Easy connection of up to 4 Liebert MPX IMS / MPHTM / MPXTM
on the network with only 1 IP address.
Q External sensors and a display can also be connected.
Features:
Q Extensive measurement functions (power, current, voltage, energy and
power factor), with higher measurement accuracy of up to 0.17%
referring to the end value.
Q Very high input currents can be measured (up to 999A per phase via
external transducer).
Q The modular setup means the solution can be adjusted customerspecific (e.g. up to 4 in-feeds per module with different input plugs
or even fixed in-feed are possible).
Q Up to 75 modules can be controlled via one IP address.
Q Saving in external databases possible without additional software.
Emerson Network Power Inline
Metering Systems (IMS) benefits:
Q Existing rack PDUs do not have to be
swapped out, as the modules can be
upgraded.
Q All consumers (where possible) can be
integrated into the monitoring system,
as numerous plug systems are provided (1ph – 3ph, max 63A per phase).
Q Flexible installation inside or outside
the rack (e.g. in the false floor).
30
Features:
Q Fast installation and easy data recording with graphic and numerical
power consumption overview; can be retrieved via web interface.
Q The power value can be read directly on the rack, as a local display is installed in every module.
Q An N-conductor overload with 3-phase systems can be prevented,
as the phase symmetry is monitored.
Q Alarm signal when incidents occur, as the threshold values
(phase symmetry, bottom limit, pre-warning and alarm) can be
be set flexibly.
Liebert MPX IMS
Emerson Network Power's solution for
this is called IMS (Inline Metering System). These modules allow existing racks
with installed basic power distributors to
be upgraded accordingly. As almost all
server racks are supplied with an A and
a B-feed, later installation is possible
without interruption. The IMS modules
can also be installed space-savingly inside
or outside the rack, e.g. in false floor. The
Inline Metering Systems (IMS) are divided
into three different product groups,
with different features.
Inline Metering System (IMS)
Knürr MODULAR IMS
Monitoring is already part of the everyday routine in most data centers when
it comes to system availability. For this
reason you decide with new systems
for socket strips/PDUs with integrated
monitoring (Managed PDUs or Adaptive
PDUs). But what do you do with existing
systems in which socket strips/PDUs are
usually installed without measuring functions?
INPUT POWER
Q Single-phase or three-phase
Q 16A up to 63A
OUTPUT DISTRIBUTOR
Q Single-phase or three-phase
Q 16A up to 63A
MODULARITY
Q Depending on the type of communication card,
external displays or external sensors
MONITORING
Q Input level
LOCAL MONITORING
Q Display for user
(MPX IMS and DI-STRIP IMS)
REMOTE MONITORING
Q Secure web and SNMP interface
RACK PDU ARRAY™
Q One IP address, up to 4 rack PDUs (MPX IMS)
Q Liebert MPXTM, Liebert MPHTM and Liebert IMS in the
same private network
Existing power distribution upgrade: Inline Metering
System from Emerson Network Power.
31
Emerson Network Power
IMS product series
Features
Knürr DI-STRIP® IMS
Liebert MPXTM IMS
Knürr Modular IMS
Measurement module
x
x
x
Modular
x
Display
Fixed
External
Remote interface
x
x
x
Measuring at input level
x
x
x
Measurement modules
per IP address
1
4
75
Max. measurement points
per IP address
1
4
300
Visualization at
PDU level
x
x
x
x
x
Visualization at
rack level
Visualization at
room level
Only with additional software
Liebert Nform
Only with additional software
Liebert Nform
x
Measurement
parameters
A
A,V,W,kWh
A,V,W,VA,
Var, kWh, cosphi.
Phase asymmetry
analysis
x
x
x
x
x
Connection option
external sensors
Input power
1ph + 3ph
max 32A
1ph + 3ph
max 32A
1ph + 3ph, max 63A (max 4 feeds),
max. 3ph 999A (via external transducer)
Connection option
IEC 60309, IEC60320, Schuko
IEC 60309
IEC 60309, GST18, fixed connection
Protocols
HTTP, SNMP, Syslog
HTTP, HTTPs, SNMP, Telnet
HTTP, HTTPs, SNMP v3,
Saving in
external database
With additional software
Liebert Nform
With additional Liebert Nform
or Avocent DSView software
Oracle, MySQL, MSSQL
Order number
1 ph. 16 A
036072001
MPXIMS-EHBAXS30
030145118
Order number
1 ph. 32 A
036072011
MPXIMS-EHBAXQ30
030145128
Order number
3 ph. 16 A
036072021
MPXIMS-EHBAXT30
030145138
Order number
3 ph. 32 A
036072031
MPXIMS-EHBAXR30
030145148
Control unit
Not required
Not required
030145108
Order numbers:
32
Easy upgrade from basic power distributor to measurement-enabled power distributor
33
Knürr PowerTrans®
Power Distribution Rack
Knürr PowerTrans®
… forms the interface between the low
voltage feed and the PDUs of the DISTRIP® product family and other components for supplying servers and other IT
equipment. The rack's basis: to connect
Knürr Miracel® with the existing PowerTrans® 19" slot-in units the elements are
simply slotted in and fixed at a free spot.
The electrical connection to the rack is
set up immediately. The power distribution is performed in the individual slot-in
units and therefore no longer has to be
installed fixed in the building.
Up to 8 slot-ins can be integrated. Each
slot-in is supplied with an A and B feed
(redundancy). With max. 250 A per phase
one single rack can provide loads of up
to 346 kVA. Plug & Play: only the main
feed on the rack must be installed by an
electrician.
The individual slot-in units and the PDUs
can be connected per Plug & Play installation, making later extensions costeffective. Slot-in units with measurement
function are also available. This slot-in
unit allows you to measure and moni-
34
tor the electrical measured variables at
the early main distributor stage. This
slot-in unit will replace standard analog
volt and ampere meters and measuring
devices for power outputs and power
factor.
The required measured variables can be
“customized” in six display panels. The
system can also be connected to an LAN.
The measured values are then displayed
and saved on a PC in the LAN or on the
Internet.
Q Clear and transparent displays.
Q Customized setting of measured
variables for standard displays.
Q Wide range of application with
flexible adjustment of input
variables.
Q Connection error detection with
installation.
Q Communication with LAN enables
integration into energy management.
Q Easy reading and display of measured data with MS Excel allows the
user to flexibly configure their own
solutions.
Equipping and installation
The outputs of the slot-in units can be flexibly equipped
as the customer wishes with the most diverse features:
different CEE and GST18 type plug connections
(e. g. Adaptive, Managed and Basic PDUs and flexible
power distribution with the GST18i5 distributor block,
3-phase).
Measurement slot-in unit with extensive measurement functions (local or remote)
Can be integrated into various management programs.
INPUT POWER
Q Max. 250 A per phase
Q 1 ph. or 3 ph. Feed
Q Max. 2 feeds per rack
OUTPUT DISTRIBUTOR
Q 230/400V - 32A via IEC 60309 socket
Q 230/400V - 16A via GST 18 socket
Q 230V - 32A via IEC 60309 socket
MODULARITY
Q Output distributors can be modularly
equipped during running operation.
MONITORING
Q Power Trans Rack complete and each individual
slot-in and output.
LOCAL MONITORING
Q Display for user
Q Display at rack level and at slot-in level/output level
REMOTE MONITORING
Q Secure web and SNMP interface
OVERLOAD PROTECTION
Q Circuit breakers for every output
Knürr PowerTrans® for professional
power distribution in the data center.
35
References:
Secure, stable and highest
possible measurement accuracy
Several renowned companies quickly
opted for the Liebert MPXTM modular
power supply. We not only consider
the individual servers that the PDUs
are connected to – together with the
customer we also keep a keen on on
the complete solution.
Automotive manufacturer
"A standardized system on which
different solutions can be set up is
important for us. As the same busbar
is always used, we don't have to think
about possible requirements in the
preliminary stage.
Every customer has different challenges and requires a solution harmonized with their needs. The following
examples show how different the customer's individual requirements are
and how these have been met with
our solutions.
We have racks with which it is only the
overall consumption we are interested
in. On the other hand there are servers
with which we also have to note the
exact consumption. The ability to select
the different modules allows us to equip
the busbars as required.
Existing racks in the data center will
also be integrated into the management
system. With the "IMS Liebert MPX"
Inline Metering System we can easily
integrate these racks into the existing
management platform, as the same
communication card as with the MPH/
MPX is installed in this product. This
36
allows all features to be used together
(e.g. external sensors, rack PDU array,
external display)."
Stock exchange trading
"The power values of each individual
server have to be measured – and
with the highest possible accuracy.
This is why we equip the busbars with
the "Receptacle Managed" output
modules, which have an individual
port measurement with an industrywide highest measurement accuracy
of +/-1%.
The data interface to the outside must
communicate with an "open" protocol,
so that the PDU can be integrated into
the existing management software.
Ready to use plug-ins also allow the PDU
to be integrated into open management
platforms, such as Nagios, for example."
Modular power supply in data centers
in stock exchange trading ensures reliability.
References:
Space-saving and
standardized system
University data center manager
"We operate a cluster computer here,
and we provide its computing performance to various third level education
institutes. For us the most important
thing is to get as much computing
power as possible for as little money
as possible, and nevertheless ensure a
secure operation.
As we have to distribute the computer's
operational costs among the individual
institutes, we use socket strips with
measurement modules that we can retrieve via the network.
Recently there have been more and
more failures here due to the high temperatures at the back of the racks. For
a couple of months now we have been
using the MPH from Liebert, which is significantly more temperature-stable than
other products on the market – and now
there are no problems. Plus the price is
right and the measurement accuracy is
first class."
DC infrastructure manager of a large
housing/collocation provider
"When we set up the infrastructure in
a DC module we don't know yet what
equipment our customers are going
to bring into the equation.
38
This isn't a problem for the server racks;
the installation dimensions are standardized – we can use standard racks
any time and are therefore ready for
everything.
It's not the same with power distributor strips however; there are too many
different connector plugs. Until now we
were always obliged to swap out complete distributor strips whenever a customer brought in new equipment.
This always entailed very high costs because the entire power cabling had to be
laid again right up to the busbars.
We have now decided for Liebert MPX so
that we can adjust the power distribution in the rack to the respective requirements by simply changing the output
modules.
We were also really impressed here by
the fact that the busbars and housings
are made of very robust aluminum and
easily survive numerous swap-outs undamaged.
Another important aspect for us is the
exceptional accuracy of the power measurement, as we invoice the power costs
individually to our customers."
State IT center (modular IMS)
"Electrical data has to be recorded in
the data centers with up to 4 feeds.
The data has to be collected and analyzed centrally in databases. Existing
comprehensive management platforms must also be able to access the
data.
Alarms have to be signaled to the existing alarm management.
400 racks are currently distributed over
3 sites. Current, voltage, power and temperature per rack have to be recorded.
The feed is flexible, from 16A 1ph to 63A
3ph.
An open protocol (SNMP) and floating
contacts must be provided to the outside so that the data and alarms can be
processed. We are constantly growing,
so the installation has to be set up extremely flexible and modular.
The Knürr IMS modular system is the
best solution for our applications, as our
business is very dynamic. Modularity
and flexibility are therefore very important for us."
SmartAisleTM from Emerson Network Power – Cold
aisle containment at the highest possible technical
level in the modern data center.
System solutions
1. MONITOR – Early failure detection for more security
Identify faults early on with comprehensive
and early-detection monitoring of numerous
measured values (N-conductor current, crest
factor, power factor, apparent power)
N-conductor current monitoring example:
The supply in the rack is 3-phase. With unbalanced load the N-conductor is stressed. An unbalanced load occurs when at least one phase is
loaded more than the others. If an unbalanced
load is too high the connection cable can heat
up, as the N-conductor is not configured higher
than the other wires in the cable. To prevent
this the standard software of the Liebert MPXTM
has two threshold values for the current in the
N-conductor.
When server 2 is switched on the "N-current
pre-warning" limit value is exceeded; a signal
is sent. When the third server is switched on
the "N-current alarm" limit value is exceeded; a
signal is sent. All signals are shown on the web
interface and also forwarded to the management software.
Server 3 is
switched on
N-current alarm
N-current
pre-warning
Server 1 running
40
Server 2 is
switched on
Backing up business-critical IT
applications based on technology and
experience: Emerson Network Power.
System solutions
2. CONTROL – Execute control commands at low cost
Execute control commands when specific
incidents occur
Different sensors can be connected to the
Liebert MPXTM. The incidents occurring (e.g.
excess temperature, alarm signals from external components, etc.) can be displayed in the
software, and also forwarded to the respective
management software. Specific control commands can also be executed.
Example: A temperature sensor and a floating
input contact can be connected to the Liebert
MPXTM. With excess temperature a signal is
sent so that the thermal management system
increases the power. The Liebert Nform management software also forwards a switching
command to the Liebert MPXTM to switch on the
signal lights.
A floating input contact is connected to a
smoke detector. If this goes off the doors are
opened automatically and an alarm is forwarded to the management software.
42
3. SECURE – Guarantee security with a better overview
Guarantee security
With a fully fitted rack (36 servers are fixed
per side on the Liebert MPXTM) a technician
must remove a server and disconnect the
mains cable.
Solution: Each individual server is labeled
with a name in the Liebert MPXTM software.
With a click on the button in the software the
respective LED beside the server's mains cable
flashes. The technician sees immediately
which mains cable they can disconnect.
43
Masterguard Trinergy®
from 200 to 1200 kW
A revolutionary high performance
UPS with dynamic operating modes,
scalability up to 9.6 MW and 99% efficiency. Trinergy provides optimum
performance and reliability with drastically reduced total operating costs
(TCO).
Highest UPS level of efficiency, up
to 99 %
Q Interface for power feed on the
bypass.
Q Real-time input power tracking.
Q Intelligent algorithm for mode
change.
3-dimensional modularity
Thanks to Trinergy's three-dimensional
modularity, companies can always extend their UPS infrastructure whenever
changing load requirements demand
it. Further power modules are simply
added!
Up to 9.6 MW effective power can
consequently be reached – an unprecedented power level.
44
A first in the industry
Masterguard Trinergy®, the revolutionary UPS architecture is based on the fact
that three standard operating configurations are combined for the first time in
one single high power UPS:
The Masterguard Trinergy®'s high level of
flexibility, energy efficiency and adaptability are in harmony with the "Best
Practice Strategies" in data centers and
another confirmation of its outstanding
efficiency.
Q Maximum power control (VFI)
Q Maximum energy savings (VFD)
Q High efficiency level and optimum
power conditioning (VI)
Features
Q Transformer-free system setup.
Q Comprehensive IGBT double
converter technology.
Q Excellent input power
- PF > 0.99
- THDi < 3%
Q Output PF up to 1.
Q Diagram of the output power factor
symmetrically referring to zero point.
Q Permanent 100 % kVA – no power
reduction, regardless of the load
(capacitive or inductive).
Q Optimum ratio between space
requirement and power.
Q Automatic output power increase
by up to +10 %.
Q High conversion efficiency (certified
up to 99%).
The unique Masterguard Trinergy® technology mix enables the system to monitor the environment and the network's
operating conditions, and to independently select the operating mode that is
best suited for the power conditions.
Masterguard Trinergy® can determine
the most efficient operating mode for
the respective network conditions and
ensures the consumer supply is optimum at all times.
The system consequently achieves
exceptional energy savings, a first class
power level and maximum security with
power supply.1
1)
Class 1 IEC 62040-3) CBEMA
Masterguard Trinergy® –
Unique architecture and technology.
45
Emerson Network Power
core competencies
When you work together with
Emerson Network Power to meet
your company-wide requirements
in the Business-Critical Continuity™ area, you not only benefit
from our products for supporting and protecting your technology infrastructure. By developing
a wide range of technologies, we
have detailed industry knowledge
and can estimate the requirements
AC power
Business-critical processes – available at all times. With an expansive range of UP
systems from Liebert®and Chloride and the respective power distribution components and racks – from individual products through to integrated systems – we
ensure an uninterrupted operation of network racks, computer rooms and data
centers.
Infrastructure management and monitoring
Management and monitoring of critical environments around the clock at several
locations. We have the right solutions for ROI-oriented business environments:
professional infrastructure management and 24/7 monitoring systems, services for
constant controlling in data centers, computer rooms and network racks, as well as
wireless, wireline and enterprise communication applications.
for the interaction of systems in
critical environments in the overall
context.
We provide this know-how with the
aid of Emerson Network Power's
core competencies. This entails different areas of first class products
and services, which will help you
to select the right solution for your
requirements, location and area of
application, so that you can provide
your customer the best services at
all times.
46
Power switching and regulation
Protection in systems against operational failure caused by power supply interruptions. We provide ASCO® Power Transfer Switches, network-parallel control cabinets
for equipment/power regulation systems, touchscreen-SCADA for monitoring and
controlling power supply and on-site power equipment as a backup to guarantee
an uninterruptible power supply for important and business-critical communication and data processing systems, vital security systems and other critical loads.
We commission industry leaders here, work with directly location-related project
management and deploy the best service technicians in the industry.
Infrastructure services
and support
Emerson Network Power's core competencies are supported by the industry's biggest
global service organization. Your services:
Precision cooling
Guaranteed precise temperatures for reliable equipment performance. We provide
"Chip-to-Room Cooling” – the most extensive range of precision cooling systems
from Liebert, which allows even the smallest temperature changes to be ruled out
so that your business-critical applications can be reliably protected.
Racks and integrated racks
Optimization of the technology and performance requirements for indoor IT applications. We provide standardized and customized integrated rack solutions that
meet all individual requirements. Our product spectrum ranges from rack solutions
from Knürr and Liebert for computer rooms of every size through to integrated
enclosures with their own thermal management, UPS and cable management in
a robust, lockable rack.
Surge protection
Power supply, voice content and data protection in the network against system
fluctuations and dangerous electrical faults. Depending on the application we provide Liebert and PowerSure™ AC Power Protection, Islatrol™ Active Tracking Filters
or Edco™ data/signal surge protection equipment for securing the power supply,
minimizing downtimes, saving valuable work time and extending equipment and
device service life.
Services
Provision of reliable analysis and test programs – supported by the biggest global
service organization in the industry. Our offering includes engineering, installation,
start-up services, project management, training and extensive on-site operational
management, preventative and prognostic maintenance and energy consumption
monitoring.
– Design, installation and startup
– Warranty service
– Preventative maintenance
– Remote monitoring around the clock
– Emergency service
– Site checks
Design
Advance planning is critical for a successful operation. We therefore offer flexible
services in development and installation for
a smooth startup and life-long effective and
efficient operation.
Installation
Right now today, we already integrate the
flexibility and scalability for your growth
tomorrow.
Efficiency
Optimization means using your infrastructure efficiently. Emerson Network Power
offers you optimized support for your daily
requirements and long-term plans – for
energy savings in particular.
Chloride LIFE.net
… Maximized system availability – real-time
diagnostics and removal of every kind of
operating fault.
… Minimized downtime – qualified
service technicians available around
the clock.
… Reduced operational costs – thanks
to preventive maintenance.
47
Emerson Network Power
Data center infrastructure
Precision cooling
SmartAisleTM
… Aisle containment.
… Highest energy efficiency.
… Compatible with all Liebert
cooling units.
Liebert HPM
From 4 kW to 230 kW, DX-Digital
Scroll-CW.
… First class energy efficiency.
… Certified performance (Eurovent).
… User-friendly iCOM controls.
Liebert HPC
Extensive range of highly efficient
chillers with free cooling of 40 kW
to 1600 kW.
… Specially designed for data
center applications in combination with SmartAisleTM.
… First class energy efficiency.
… iCOM control.
Liebert CRV
… Highly-efficient linked precision cooling units, available in
the DX or CW version.
… Decoupled control for airflow
and cooling capacity.
… Cooling capacity modulation
with Digital Scroll.
… iCOM control with remote rack
sensors.
…
…
…
…
Liebert XD
Cooling agent-based highdensity cooling applications
close to servers.
"Hot spot" management for up
to 30 kW per rack.
On-demand upgrade as with
"Plug&Play"
High efficiency and 100% .
sensitive cooling.
AC Power
Chloride Trinergy
… Dynamic function modes
(VFI, VI, VFD) with an average
efficiency level of 97.9%.
… Three-level module design for
optimum scalability (up to
9.6 MW).
… Maximum availability thanks
to internal redundancy and
simultaneous maintenance.
Liebert NXL
… UPS for critical high power
applications.
… Higher capacity and reliability
… Meets the power and energy
efficiency requirements of
high availability data centers.
48
Liebert STS
… Solid state digital bus transfer
switch for uninterruptible
power supply.
… Dual bus power supply
systems for connecting critical
loads with two independent
UPS systems.
… High reliability with TripleLogic redundancy with power
control.
Power Distribution Rack
Central connection unit to power
supplies for individual server
racks.
… Interface between the low
voltage feed and the PDU
(Power Distribution Unit).
… Individually pluggable slot-in
units.
… Up to 329 kVA/rack.
Rack PDU
Rack-based power distribution units.
… Supports measurement at socket strip level,
switching at socket level and measurement
and switching at socket level for remote power
management/power control.
… Horizontal and vertical models for different rack
configurations in branch and external offices.
Racks and integrated racks
Knürr CoolTherm® 4–35 KW
Energy-efficient server rack
technology.
… Significant reduction in TCO
(Total Cost of Ownership).
… Autonomous server rack;
independent of environmental
conditions.
… Up to 30% improved cooling
system energy efficiency.
Knürr DCD®
Passive cooling water heat
exchanger.
… Cools up to 30 kW.
… Neutralizes room heat.
… Combinable with Knürr and
other manufacturer products.
Knürr DCM®
19” rack platform for server, telecommunications and network
technology.
… Aluminum construction
… Threaded connection system
… T-slot system
Surge protection
Liebert TVSS
… Easy to connect to the UPS, the distributor or
the service entrance of the systems.
… Surge protective devices (SPD) for protecting
sensitive equipment against damage caused by
short voltage rises.
Infrastructure management and monitoring
Avocent MergePoint® Unity
Appliance
Secure remote access to servers
(KVM over IP).
… Secure remote access to servers in data centers and branch
offices.
… More error-tolerant and
comprehensive remote
management solution with
simultaneous use of in-band
and out-of-band tools.
Avocent MergePoint® Service Processor Manager
Secure ESP remote management
(Embedded Service Processor).
… One console for different service processor types and IPMI.
… SoL, power control and hardware monitoring support.
Avocent ACS Console Server
Secure remote access (Serial over
IP) to console equipment.
… Remote access to servers,
routers and other consolebased equipment.
… Physical use or encapsulation
in one virtual machine.
Alber Battery Monitoring
… Monitors batteries and
prevents premature battery
failures.
… Internal direct current resistance test method to rule out
doubts.
… Specification of the actual
battery status by the user –
comparable with ultrasound.
Knürr Synergy®
Consoles, monitor walls and
mobile equipment trolleys for
control rooms.
… Standards compliance and
ergonomics.
… Manually height-adjustable,
even in basic version.
… Modular construction.
Avocent DSView® 3 Management Software
Centralized data center management.
… Remote across, remote monitoring and remote controlling
on various platforms and at
different locations (time and
location-independent).
… Secure, centralized out-ofband management of all connected IT and network devices
in distributed data centers.
1
4
6
4
1
5
3
2
Avocent Data Center Planner
Visual solution for infrastructure planning and infrastructure
management.
… Reduces time required for providing/installing the equipment.
… Enables an advance analysis of the effects of changes before
resources are used.
… Increases accuracy and reduces time required for complete
infrastructure checks.
… Reduces the risk of an interruption in power supply caused by
mechanical faults.
Aperture® Software Suite
… Optimizes energy consumption, capital resources and process
efficiency with risk-adjusted values to determine the actual
resource load.
… Correct measurement of the physical infrastructure and
extended service life of the data center with holistic view of
the infrastructure.
… Provides a central, secure information source for the entire
data center in a business service view.
1
AC Power
4
Precision Cooling
2
Infrastructure Management
& Monitoring
5
Racks & Integrated Cabinets
3
Power Switching & Controls
6
Surge Protection
®
Avocent DSView 3
Power Manager
Detailed performance and environmental data
and effortless control.
… Provides a power monitoring function in
addition to DSView 3 software access and
control functions.
… Monitors and measures IT energy consumption and defines the cost/development trends
of internal and remote data centers.
49
Emerson Network Power
Container data center infrastructure
Cabling/pipework tray
Liebert APM
Liebert CRV
Knürr DCM
Liebert Nform
Avocent Remote
Infrastructure
Management
Liebert HCR
Emerson Network Power
makes the Business Continuity™ mobile with its innovative
Container data center infrastructure:
Disaster recovery, humanitarian actions
with natural disasters, sports events,
film productions or simple data center
extensions – all at no construction cost:
the Emerson Network Power mobile
infrastructure meets all Business-Critical
Continuity™ requirements.
Emerson Network Power once again
proves that maximum efficiency is possible with this effective "All-in-one”
solution for all standard and special situations!
The Container data center infrastructure
is mobile and provides complete, efficient protection for IT infrastructures
50
that support operational processes, with
both standard and special requirements.
The Container can be configured for
specific customer requirements and
transported anywhere to support the
efficiency of stationary or temporary operations rooms.
The benefits of data centers designed for
fast site relocation are: IT environment
protection without impairing computing
performance, continuous power management during an emergency situation
and provision of a ready-to-operate integrated platform, which can be quickly
activated.
The internal infrastructure includes all
available innovative solutions: racks from
Knürr, UPS units from Liebert and power
distribution units and precision cooling
units from Emerson Network Power.
The layout is supplemented by infrastructure management solutions and
monitoring software from Avocent.
For a virtual view of the Container solution go to:
www.datacenterinfrastructure.eu
Emerson Network Power
Innovative technologies that provide our
customers clear competitive benefits
IT managers in data centers and companies are faced with constantly growing challenges: increasingly denser IT
infrastructures, heterogeneous manufacturer and component landscapes for
critical equipment (power supply, cooling, cabling, racks) and rising energy
efficiency requirements.
Emerson Network Power provides
integrated and ready-made IT solutions for small and medium-sized
enterprises.
Our racks, UPSs, cooling systems, power
distribution systems and cable management solutions are supported by reliable
monitoring systems and therefore form
the ideal solution for setting up futureproof data centers.
Nowadays successful companies depend on adjustable technologies so they
can react quickly to new market requirements. Your data center's support infrastructure must be able to support new IT
developments such as virtualization and
consolidation, and their power supply
and cooling requirements. All changes,
relocations or extensions of your IT have
an effect on the entire support infrastructure. You therefore require products and support that guarantee reliable
operation of your IT systems in these
environments.
You will find more information
online at:
www.emersonnetworkpower-emea.com
51
As at: July 2011 / Version 1.0
Emerson Network Power provides innovative solutions and expertise
in areas such as AC and DC power supply, precision cooling systems,
embedded computer and power supply systems, integrated racks
and enclosures, network circuits and controls, monitoring and
connectivity. All solutions are supported locally all over the world
by Emerson Network Power customer service technicians. You will
find more information on Emerson Network Power’s products and
support services at
Locations
Emerson Network Power - EMEA
Via Leonardo Da Vinci 16/18
Zona Industriale Tognana
35028 Piove di Sacco (PD) … Italy
T +39 049 9719 111
F +39 049 5841 257
[email protected]
www.emersonnetworkpower.com
www.eu.emersonnetworkpower.com
www.emerson.com
www.knuerr.com
Emerson Network Power Racks and Solutions
Mariakirchener Straße 38
"SOTUPSG…(FSNBOZ
T +49 8723 27 0
F +49 8723 27 154
[email protected]
Emerson Network Power - US
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229
T +1 614 8880246
Emerson Network Power - Asia
7/F, Dah Sing Financial Centre
108 Gloucester Road, Wanchai
Hong Kong
T +852 2572220
F +852 28029250
While every precaution has been taken to ensure accuracy and completeness in this
literature, Emerson Network Power assumes no responsibility and disclaims all liability
for damages resulting from use of this information or for any errors or omissions.
©2011 Emerson Network Power.
All rights reserved throughout the world. Specifications subject to change without notice.
Emerson Network PowerTM
The Global leader in Business-Critical Continuity™ solutions.
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Infrastructure Management & Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co.
…03…$PODFQUHSBQIJDTFEJUPSJBM(SPQQ#FSHNBOO…4VCKFDUUPUFDIOJDBMDIBOHFTFSSPSTBOEPNJTTJPOT
Emerson Network Power, a division of Emerson (NySE:EMR),
is the world’s leading provider of Business-Critical Continuity™
“Grid-to-Chip” solutions for telecommunication networks, data
centers, medical facilities and industrial systems.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement