Rack Power
Distribution
Worldwide
Introduction
APC by Schneider Electric offers a wide array of
standardized Rack Power Distribution Units (PDUs)
designed to increase manageability and efficiency
in your data center.
TM
TM
Basic Rack PDUs
• reliable power distribution
Metered Rack PDUs
• real-time remote monitoring of connected loads
• user-defined alarms warn IT and data center
managers of potential circuit overloads to prevent
accidental power loss to critical equipment
Switched Rack PDUs
• metered functionality
• individual outlet control to power cycle outlets
• manage on-off equipment sequencing
Metered by Outlet Rack PDUs
• provide greater power management
• individual outlet-level power metering
• user-resettable energy (kWh) logs for capacity
planning and energy efficiency initiatives
AP8000 Series Rack PDUs
The AP8000 Series Rack PDU platform will help IT
and facilities managers more effectively manage
power capacity and functionality for critical network,
server, and data center equipment. These Rack PDUs
solve rack-level power needs while incorporating
intelligent features such as real power measurement
and environmental monitoring, all in a spaceefficient, zero-U form factor. AP8000 Series Rack
PDUs include active power metering and remote
alarming with volts, amps, real power (kW), and
energy (kWh) measurements.
Access the latest electronic version of this
brochure at: www.apc.com/wp?br=4
2
3
Rack PDU Product Feature by
Family/Series
Basic
Metered
Metered by
Outlet with
Switching
Switched
AP7500 AP7800
AP8800
AP7900
AP8900
AP8600
and 9500
SeriesSeriesSeriesSeries Series
Series
Design Features
Ultra-low-profile, space-saving design
Hydraulic-magnetic circuit breakers
(in units configured with circuit breakers)
Ultra-low-profile circuit breakers (for units with breakers)
Locking IEC receptacles and locking power cord compatible
Environmental monitoring port for external
temperature/humidity monitoring
Display and Network Management
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓*
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓
✓
✓
✓
✓
✓ ✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Outlet level grouping (multiple outlets in same or multiple units
follow single command)
✓
✓
✓
✓
✓
✓
✓
✓
✓
User access control with assignable roles, access levels at
device and outlet level
✓
✓
✓
✓
✓
✓
✓ ✓
✓
Full featured network management capability via Web, SNMP, Telnet
Two digit, 7-segment LED display
User-interactive LCD display for local access
Network Port Sharing (Up to four rack PDUs
share one IP address in one enclosure)
Local USB port for easy local firmware updates
Metering Capability
Active current measurements (amps)
Active power measurements
(Including volts, amps, real power (kW), and energy (kWh)
User customizable alarms and warnings
Embedded log memory to record/review/report historic metered data
Individual outlet power metering
Outlet Control
Individual outlet remote power on/off control
Power-on sequencing and time delays with full user customization
Maintenance and Upgradeability
Redundant internal power supply for improved Switched
Rack PDU reliability
Field-replaceable network management module
✓
✓
✓
*Not applicable on AP8965.
4
5
Basic Rack PDUs
APC Basic Rack PDUs provide reliable power distribution
via a single input with multiple output receptacles and
distributes power from low-amperage, single-phase
circuits to higher-power, three-phase solutions.
200 – 240 V Input
100 – 120 V Input
Voltage
Mounting
U-space
Nominal
Voltage
Region
Input
Circuit
Nominal
Power
Input Plug
Type
Output
Receptacles
Cord
Length
APC SKU
Vertical, 0U
100 – 120
NAM, LAM
15 A
1.4 kW
NEMA 5-15P
(14) 5-15
3.6 m
AP9567
Vertical, 0U
120
NAM
20 A
1.9 kW
NEMA L5-20P
(24) 5-20
3.0 m
AP7530
Vertical, 0U
100 – 120
NAM
20 A
1.9 kW
NEMA L5-20P
(14) 5-15
3.6 m
AP9551
Vertical, 0U
100 – 120
Japan
20 A
2.0 kW
NEMA L5-20P
(24) 5-15
3.0 m
AP7530J
Vertical, 0U
120
NAM
30 A
2.9 kW
NEMA L5-30P
(24) 5-20
3.0 m
AP7532
Vertical, 0U
100
Japan
30 A
3.0 kW
NEMA L5-30P
(24) 5-15
3.0 m
AP7532J
Horizontal, 1U
100 – 120
NAM, LAM
15 A
1.4 kW
NEMA 5-15P
(10) 5-15
3.6 m
AP9562
Horizontal, 1U
100 – 120
NAM
20 A
1.9 kW
NEMA 5-20P
(10) 5-20
3.6 m
AP9563
Horizontal, 1U
100 – 120
NAM
20 A
1.9 kW
NEMA L5-20P
(10) 5-20
3.6 m
AP9564
Horizontal, 1U
100 – 120
NAM
30 A
2.9 kW
NEMA L5-30P
(10) 5-20
3.6 m AP9560
Vertical, 0U
120 – 240
Worldwide
10 A
2.3 kW
IEC C14
(15) C13
2 m
AP9568
Vertical, 0U
120 – 230
Worldwide
16 A
3.3 kW
IEC 320 C20
(15) C13
2.5 m
AP9572
Vertical, 0U
200 – 240
NAM
20 A
3.3 kW
NEMA L6-20P
(20) C13
(4) C19
3.0 m
AP7540
Vertical, 0U
230
EMEA, APJ, LAM, GCN
16 A
3.7 kW
IEC 309 16 A
(20) C13
(4) C19
1.0 m
AP7551
Vertical, 0U
230
EMEA, APJ, LAM, GCN
16 A
3.7 kW
IEC 309 16 A
(20) C13
(4) C19
3.0 m
AP7554
Vertical, 0U
230
Worldwide
16 A
3.7 kW
IEC C20
(20) C13
(4) C19
3.0 m
AP7552
Vertical, 0U
200 – 240
NAM
30A
5.0 kW
NEMA L6-30P
(20) C13
(4) C19
3.0 m
AP7541
Vertical, 0U
230
EMEA, APJ, LAM, GCN
32 A
7.4 kW
IEC 309 32 A
(20) C13
(4) C19
3.0 m
AP7553
Horizontal, 1U
208
NAM, LAM
20 A
3.3 kW
NEMA L6-20P
(12) C13
3.6 m
AP9566
Horizontal, 1U
120 – 240
Worldwide
16 A
3.7 kW
IEC C20
(10) C13
2.5 m
AP9559
Horizontal, 1U
100 – 240
Worldwide
16 A
3.7 kW
IEC C20
(12) C13
2.5 m
AP9565
Horizontal, 1U
208
NAM
30 A
5.0 kW
NEMA L6-30P
(4) C19
3.0 m
AP9570
Horizontal, 1U
200 – 240
NAM, LAM
30 A
5.0 kW
NEMA L6-30P
(10) C13
3.6 m
AP9571A
Horizontal, 2U 230
EMEA, APJ, LAM, GCN
32 A
7.4 kW
Hardwire
(4) C19
8.5 m
AP7585
Horizontal, 2U 230
EMEA, APJ, LAM, GCN
32 A
7.4 kW
Hardwire
(4) IEC 309 32A
8.5 m
AP7586
Rack PDU Mounting Styles
> Horizontal 1/2U mounting
6
>V
ertical 0U mounting
with toolless mounting
(2) C19
> S pace-saving 0U
mounting options (AR7711)
7
Basic Rack PDUs Continued...
400 – 415 V
Three-phase Input
208 V Three-phase Input
Voltage
Mounting
U-space
Nominal
Voltage
Region
Input
Circuit
Nominal
Power
Input Plug
Type
Output
Receptacles
Cord
Length
APC SKU
Vertical, 0U
208
NAM
20 A, 3ø
5.8 kW
NEMA L21-20P
(42) 5-20
1.0 m
AP7562
Vertical, 0U
208
NAM
20 A, 3ø
5.8 kW
NEMA L21-20P
(42) 5-20
3.0 m
AP7592
Vertical, 0U
208
NAM
20 A, 3ø
5.8 kW
NEMA L21-20P
(21) 5-20
(6) L6-20
1.0 m
AP7563
Vertical, 0U
208
NAM
20 A, 3ø
5.8 kW
NEMA L21-20P
(36) C13
(6) C19
1.0 m
AP7564
Vertical, 0U
200 – 240
NAM
50 A, 3ø
12.5 kW
CS8365C
(30) C13
(6) C19
1.0 m
AP7568
Vertical, 0U
200 – 240
NAM
50 A, 3ø
12.5 kW
CS8365C
(30) C13
(6) C19 3.0 m
AP7598
Vertical, 0U
200 – 240 NAM
50 A, 3ø
14.4 kW
CS8365C
(24) C13
(2) L6-30
(4) C19
1.0 m
AP7569
Vertical, 0U
200 – 240 NAM
50 A, 3ø
14.4 kW
CS8365C
(24) C13
(2) L6-30
(4) C19
3.0 m
AP7599
Vertical, 0U
208
NAM
50 A, 3ø
12.5 kW
CS8365C
(6) C19
(3) C13
1.8 m
AP7567A
Horizontal, 1U
200 – 240
NAM
50 A, 3ø
14.4 kW
CS8365C
(6) C19
2.4 m
AP7516
Horizontal, 2U
120/208
NAM
30 A, Split ø
5.8 kW
NEMA L14-30P
(4) L5-20
8.5 m
AP7580
Horizontal, 2U
120/208
NAM
30 A, Split ø
5.8 kW
NEMA L14-30P
(4) L6-20
8.5 m
AP7581
Horizontal, 2U
120/208
NAM
30 A, Split ø
5.8 kW
NEMA L14-30P
(12) 5-20
8.5 m
AP7582
Horizontal, 2U
120/208
NAM
30 A, Split ø
5.8 kW
NEMA L14-30P
(4) L5-30
8.5 m
AP7583
Horizontal, 2U
120/208
NAM
30 A, Split ø
5.8 kW
NEMA L14-30P
(4) L6-30
8.5 m
AP7584
Vertical, 0U
400
EMEA, APJ, 16 A, 3ø
LAM, GCN
11 kW
IEC 309 16 A 3P+N+PE
(36) C13
(6) C19
1.0 m
AP7557
Vertical, 0U
400
EMEA, APJ, 16 A, 3ø
LAM, GCN
22 kW
IEC 309 32 A 3P+N+PE
(6) C19
(3) C13
1.8 m
AP7555A
Vertical, 0U
NAM
11.5 kW
IEC 309 20 A 3P+N+PE
(36) C13
(6) C19
1.0 m
AP7557NA
22 kW
IEC 309 32 A 3P+N+PE
(6) C19
2.4 m
AP7526
415
Horizontal, 1U 400
20 A, 3ø
EMEA, APJ, 32 A, 3ø
LAM, GCN
Choosing APC Rack PDUs
Use the Rack PDU Selector to help you choose from
our diverse rack power distribution offerings, designed
to meet the needs of entry-level networking equipment
and high-density server and blade environments.
The APC Rack PDU Selector can filter
Rack PDU selection by:
> Family type
> Output voltage
> Mount style (vertical or horizontal)
> Input plug
> Localized price
A wide selection of APC Rack PDUs are also available
in Schneider Electric Design Portal tools such as:
> InfraStruxure™ Designer
> Small IT Solution Designer
www.apc.com/tools/selector/pdu/
8
9
Metered Rack PDUs
Metered Rack PDUs provide real-time remote
monitoring of connected loads. User-defined alarms
warn of potential circuit overloads before critical IT
failures occur.
200 – 240 V Input
100 – 120 V Input
Voltage
Mounting
U-space
Nominal
Voltage
Region
Input
Circuit
Nominal
Power
Input Plug
Type
Output
Receptacles
Cord
Length
APC SKU
Vertical, 0U
100 – 120
NAM
15 A
1.4 kW
NEMA 5-15P
(16) 5-15
3.0 m
AP7831
Vertical, 0U
120
NAM
20 A
1.9 kW
NEMA L5-20P
(24) 5-20
3.0 m
AP7830
Vertical, 0U
100
Japan
20 A
2.0 kW
NEMA L5-20P
(24) 5-15
3.0 m
AP7830J
Vertical, 0U
100
Japan
30 A
2.4 kW
NEMA L5-30P
(24) 5-15
3.0 m
AP7832J
Vertical, 0U
120
NAM
30 A
2.9 kW
NEMA L5-30P
(24) 5-20
3.0 m
AP7832
Horizontal, 1U
120
NAM, LAM
15 A
1.4 kW
NEMA 5-15P
(8) 5-15
3.6 m
AP7800
Horizontal, 1U
120
NAM, LAM
20 A
1.9 kW
NEMA L5-20P
(8) 5-20
3.6 m
AP7801
Horizontal, 2U
120
NAM, LAM
30 A
2.9 kW
NEMA L5-30P
(16) 5-20
3.6 m
AP7802
Horizontal, 2U
100
Japan
30 A
3.0 kW
NEMA L5-30P
(16) 5-15
3.6 m
AP7802J
Vertical, 0U
230
Worldwide
10/15 A
2.3 kW
IEC 320 C14
(16) C13
3.0 m
AP7850
Vertical, 0U
100 – 240
NAM, LAM
20 A 3.3 kW
NEMA L6-20P
(18) C13
(2) C19
3.0 m
AP8858NA3
Vertical, 0U
100 – 240
Worldwide
16 A
3.3 kW
IEC 320 C20
(18) C13
(2) C19
Inlet
AP8858
EMEA, APJ, 16 A
LAM, GCN
3.7 kW
IEC 309 16 A
(18) C13
(2) C19
3.0 m
AP8858EU3
30 A
5.0 kW
NEMA L6-30P
(36)C13
(6) C19
3.0 m
AP8841
Vertical, 0U
220 – 240
EMEA, APJ, 32 A
LAM, GCN
7.4 kW
IEC 309 32 A
(36)C13
(6) C19
3.0 m
AP8853
Horizontal, 1U
Vertical, 0U
100 – 240
Vertical, 0U
200 – 240
NAM, Japan
LAM
100 – 240
Worldwide
10/15 A
2.5 kW
IEC 320 C14
(8) C13
Inlet
AP7820
Horizontal, 1U 100 – 240
Worldwide
16 A
3.3 kW
IEC 320 C20
(8) C13
Inlet
AP7821
Horizontal, 2U
NAM
30 A
5.0 kW
NEMA L6-30P
(12) C13
(4) C19
3.6 m
AP7811
EMEA, APJ, 32A
LAM, GCN
7.4 kW
IEC 309 32 A
(12) C13
(4) C19
3.6 m
AP7822
200 – 240
Horizontal, 2U 230
Rack PDU local display
Load indicator LEDs
Serial connection: local configuration
and out-of-band management
AP7000 series
Local two-digit LED
current monitoring display
10
User interactive
display for local access
Environmental monitoring port for
external temperature/humidity probe
AP8000 series
Network management: access, configure,
and receive warnings from remote
locations via Web, SNMP, and Telnet
CAN In/Out ports for
network port sharing
Local USB port for flash firmware
updates and downloading data/event
logs (not to be used as serial port)
11
Metered Rack PDUs Continued...
400 – 415 V
Three-phase Input
208 V Three-phase Input
Voltage
Mounting
U-space
Nominal
Voltage
Region
Input
Circuit
Nominal
Power
Input Plug
Type
Output
Receptacles
Cord
Length
APC SKU
Vertical, 0U
208
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(42) 5-20
1.0 m
AP7862
Vertical, 0U
208
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(42) 5-20
3.0 m
AP7892
Vertical, 0U
208
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(21) 5-20
(6) L6-20
1.0 m
AP7863
Vertical, 0U
208
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(21) 5-20
(6) L6-20
3.0 m
AP7893
Vertical, 0U
208
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(36) C13
(2) 5-20
(6) C19
1.8 m
AP8861
Vertical, 0U
(42) 5-15
1.0 m
AP7862J
Vertical, 0U
208
NAM
30 A, 3ø
8.6 kW
NEMA L21-30P
208
(36) C13
(2) 5-20
(6) C19
1.8 m
AP8865
Vertical, 0U
200 – 240
Japan
50 A, 3ø
6.0 kW
10.0 kW
NEMA L21-20P
CS8365C
(36) C13
(6) C19
1.8 m
AP8868
Vertical, 0U
200 – 240
NAM
50 A, 3ø
14.4 kW
CS8365C
(24) C13
(2) L6-30
(4) C19
1.0 m
AP7869
Vertical, 0U
200 – 240
NAM
50 A, 3ø
14.4 kW
CS8365C
(24) C13
(2) L6-30
(4) C19
3.0 m
AP7899
Vertical, 0U
200 – 240
NAM
50 A, 3ø
14.4 kW
CS8365C
(6) C19
1.8 m
AP7867A
Vertical, 0U
200 – 240
NAM
60 A, 3ø
17.3 kW
IEC 309 60 A 3P+PE
(12) C19
1.8 m AP8866
Vertical, 0U
200 – 240
NAM
60 A, 3ø
17.3 kW
IEC 309 60 A 3P+PE
(30) C13
1.8 m AP8867
Vertical, 0U
400 – 415
Worldwide
16 A, 3ø
11 kW
IEC 309 16 A 3P+N+PE
(36) C13
(6) C19
1.8 m
AP8881
Vertical, 0U
415
NAM
30 A, 3ø
17.3 kW
IEC 309 30 A 3P+N+PE
(12) C19
(30) C13
1.8 m
AP8887
Vertical, 0U
400
EMEA, APJ, LAM, GCN
32 A, 3ø
22 kW
IEC 309 32 A 3P+N+PE
(12) C19
(30) C13
1.8 m
AP8886
Vertical, 0U
400
EMEA, APJ, LAM, GCN
32 A, 3ø
22 kW
IEC 309 32 A 3P+N+PE
(6) C19
1.8 m
AP7855A
Vertical, 0U
NAM
40 A, 3ø
23 kW
IEC 309 60 A 3P+N+PE
(12) C19
1.8 m
AP8888
415
NAM
20 A, 3ø
Rack PDU Software options:
APC Intelligent Rack PDUs provide remote power
utilization data and optional outlet control to allow
data center managers to make informed decisions
on load balancing and right-sizing IT environments
to lower total cost of ownership.
(6) C13
(30) C13
Integration with StruxureWare for
Data Centers Software
APC Rack PDUs, when combined with StruxureWare™
Data Center Operations, help provide an instant overview
of data center operations with additional inventory
management, PUE calculation, real-time device alarms,
and location-based drill-down of power distribution.
Remote access to Intelligent Rack PDUs is available via:
> Web browser
> Telnet (CLI)
> SNMP
12
13
Switched Rack PDUs
Switched Rack PDUs provide advanced load monitoring
combined with remote on/off switching control of
individual outlets for power cycling, delayed power
sequencing, and outlet use management.
200 – 240 V Input
100 – 120 V Input
Voltage
Mounting
U-space
Nominal
Voltage
Region
Input
Circuit
Nominal
Power
Input Plug
Type
Output
Receptacles
Cord
Length
APC SKU
Vertical, 0U
100 – 120
NAM
15 A
1.4 kW
NEMA 5-15P
(16) 5-15
3.0 m
AP7931
Vertical, 0U
120
NAM, LAM
20 A
1.9 kW
NEMA L5-20P
(24) 5-20
3.0 m
AP7930
Vertical, 0U
100
Japan
20 A
1.9 kW
NEMA L5-20P
(24) 5-15
3.0 m
AP7930J
Vertical, 0U
120
NAM, LAM
30 A
2.9 kW
NEMA L5-30P
(24) 5-20
3.0 m
AP7932
Vertical, 0U
100
Japan
30 A
3.0 kW
NEMA L5-30P
(24) 5-15
3.0 m
AP7932J
Horizontal, 1U
100 – 120
NAM, LAM
15 A
1.4 kW
NEMA 5-15P
(8) 5-15
3.6 m
AP7900
Horizontal, 1U
100 – 120
NAM
20 A
1.9 kW
NEMA L5-20P
(8) 5-20
3.6 m
AP7901
Horizontal, 2U
120
NAM
30 A
2.9 kW
NEMA L5-30P
(16) 5-20
3.6 m
AP7902
Horizontal, 2U
100
Japan
32 A
3.0 kW
NEMA L5-30P
(16) 5-15
3.6 m
AP7902J
Vertical, 0U
230
EMEA, APJ, 10 A
GCN
2.3 kW
IEC C14
(16) C13
3.0 m
AP7950
Vertical, 0U
100 – 240
NAM, LAM
20 A
3.3 kW
NEMA L6-20P
(7) C13
(1) C19
3.0 m
AP8958NA3
Vertical, 0U
100 – 240
Worldwide
16 A
3.3 kW
IEC 320 C20
(7) C13
(1) C19
Inlet
AP8958
Vertical, 0U
230
EMEA, APJ, 16 A
LAM, GCN
3.7 kW
IEC 309 16 A
(7) C13
(1) C19
3.0 m
AP8958EU3
Vertical, 0U
100 – 240
NAM, LAM
20 A
3.3 kW
NEMA L6-20P
(21) C13
(3) C19
3.0 m
AP8959NA3
Vertical, 0U
100 – 240
Worldwide
16 A
3.3 kW
IEC 320 C20
(21) C13
(3) C19
Inlet
AP8959
Vertical, 0U 230
EMEA, APJ,
LAM, GCN
16 A
3.7 kW
IEC 309 16 A
(21) C13
(3) C19
3.0 m
AP8959EU3
Vertical, 0U
200 – 240
NAM, LAM
30 A
5.0 kW
NEMA L6-30P
(21) C13
(3) C19
3.0 m
AP8941
Vertical, 0U
220 – 240
EMEA, APJ
LAM, GCN
32 A
7.4 kW
IEC 309 32 A
(21) C13
(3) C19
3.0 m
AP8953
Horizontal, 1U
208 – 230
Worldwide
10/15 A
2.5 kW
IEC 320 C14
(8) C13
2.0 m
AP7920
Horizontal, 1U
208 – 230
Worldwide
16 A
3.3 kW
IEC 320 C20
(8) C13
2.4 m
AP7921
Horizontal, 2U
200 – 240
NAM
30 A
5.0 kW
NEMA L6-30P
(16) C13
3.6 m
AP7911A
EMEA, APJ, 32 A
LAM, GCN
7.4 kW
IEC 309 32 A
(16) C13
3.6 m
AP7922
Horizontal, 2U 230
What is metered on AP8800, AP8900,
and AP8600 Series Rack PDUs?
> Device: power and energy
> Phase: current*, power, and voltage
> Internal circuit breaker (bank): current*
> Outlet: current, power, energy (AP8600 Series only)
*AP7000 series monitors current per phase and breaker only.
14
Why do we meter?
> Device: Rack level capacity change, planning,
and efficiency calculations
> Phase: Balance loads between phases to protect
against tripping upstream branch circuit breakers
> Internal circuit breaker (bank): Protect against
tripping internal circuit breakers
> Outlet: Detailed capacity change, equipment
efficiency, and trends
15
Switched Rack PDUs Continued...
400 – 415 V
Three-phase
Input
208 V
Three-phase
Input
Voltage
Input
Circuit
Nominal
Power
Input Plug
Type
Output
Receptacles
Cord
Length
APC SKU
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(24) 5-20
1.0 m
AP7960
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(24) 5-20
3.0 m
AP7990
208
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(21) C13
(3) C19
1.8 m
AP8961
Vertical, 0U
208
NAM
30 A, 3ø
8.6 kW
NEMA L21-30P
(21) C13
(3) C19
1.8 m
AP8965
Vertical, 0U
200 – 240
NAM
50 A, 3ø
12.5 kW
CS8365C
(21) C13
(3) C19
1.0 m
AP7968
Vertical, 0U
200 – 240
NAM
50 A, 3ø
12.5 kW
CS8365C
(21) C13
(3) C19
3.0 m
AP7998
Vertical, 0U
400 – 415
Worldwide
16 A, 3ø
11 kW
IEC 309 16 A 3P+N+PE
(21) C13
(3) C19
1.8 m
AP8981
Mounting
U-space
Nominal
Voltage
Vertical, 0U
208
Vertical, 0U
208
Vertical, 0U
Region
Metered by Outlet with
Switching Rack PDUs
Metered-by-outlet Rack PDUs provide real-time remote
monitoring of each individual outlet to empower IT
professionals with the necessary tools for advanced
data center energy management.
400 – 415 V
Threephase
Input
208 V
Threephase
Input
200 – 240 V
Input
Voltage
Mounting
U-space
Nominal
Voltage
Region
Input
Circuit
Nominal
Power
Input Plug
Type
Output
Receptacles
Cord
Length
APC SKU
Vertical, 0U
208
NAM
20 A
3.3 kW
NEMA L6-20P
(21) C13
(3) C19
3.0 m
AP8659NA3
Vertical, 0U
100 – 240
Worldwide
20 A
3.3 kW
IEC 320 C20
(21) C13
(3) C19
Inlet
AP8659
EMEA, APJ,
LAM, GCN
16 A
3.7 kW
IEC 309 16 A
(21) C13
(3) C19
3.0 m
AP8659EU3
Vertical, 0U
200 – 240 NAM, Japan
LAM
30 A
5.0 kW
NEMA L6-30P
(21) C13
(3) C19
3.0 m
AP8641
Vertical, 0U
220 – 240
EMEA, APJ,
LAM, GCN
32 A
7.4 kW
IEC 309 32 A (21) C13
(3) C19
3.0 m
AP8653
Vertical, 0U
208
NAM
20 A, 3ø
5.7 kW
NEMA L21-20P
(21) C13
(3) C19
1.8 m
AP8661
Vertical, 0U
400 – 415
Worldwide
16 A, 3ø
11 kW
IEC 309 16 A 3P+N+PE
(21) C13
(3) C19
1.8 m
AP8681
Vertical, 0U
230
AP8661
16
17
Rack-mount Transfer Switch
Input Voltage
100 V
100/120 V
120 V
120 V
200 – 208 V
200 – 208 V
208 V
208/230 V
200-/230 V
230 V
230 V
208 V 3ø
Mounting
Input Circuit
U-space
Input Plug Type
Output Receptacles
Cord Length
APC SKU
1
20 A
NEMA L5-20P
(8) 5-15
2.4 m
AP7752J
1
15 A
NEMA 5-15P
(8) 5-15
2.4 m
AP7750A
1
20 A
NEMA L5-20P
(10) 5-20
2.4 m
AP7752
2
30 A
NEMA L5-30P
(16) 5-20
2.4 m
AP7753
1
20 A
NEMA L6-20P
(8) C13, (1) C19
2.4 m
AP7730
2
30 A
NEMA L6-30P
(16) C13, (2) C19
2.4 m
AP7732
2
30 A
NEMA L6-30P
(1) L6-30R
2.4 m
AP7731
1
15 A
IEC C14 Inlet (12) C13
None
AP7721
1
20 A
IEC C20 Inlet (8) C13, (1) C19
None
AP7723
1
16 A
(2) IEC 309
(1) IEC-309
0.9 m
AP7722A
2
32 A
IEC 309
(16) C13, (2) C19
2.4 m
AP7724
1
20 A, 3ø
NEMA L21-20P
(1) L21-20R
0.9 m
AP7701
Locking IEC Power Cords
PDU
Input
IEC C14
Server Input
IEC C13
Straight
IEC C14
IEC C13
(Three right, three left)
IEC C20
IEC C19
Straight
IEC C20
IEC C19
(Three right, three left)
Cord Length
Cords
per SKU
APC SKU
0.6 m
1.2 m
1.8 m
0.6 m
1.2 m
1.8 m
0.6 m
1.2 m
1.8 m
0.6 m
1.2 m
1.8 m
6
6
6
6
6
6
6
6
6
6
6
6
AP8702S
AP8704S
AP8706S
AP8702R
AP8704R
AP8706R
AP8712S
AP8714S
AP8716S
AP8712R
AP8714R
AP8716R
Bracket Kits
Locking IEC power cords provide a mechanism
to secure power cord connections to the Rack
PDU when used with any AP8000 Series unit.
Environmental
Description
APC SKU
Vertical, 0U mounting brackets
for Dell® and Rittal® enclosures
AP7400*
Vertical, 0U mounting brackets
for HP® enclosures
AP7406*
NetShelter™ SX and third party racks,
0U accessory and PDU bracket
AR7711
Horizontal to Vertical,
0U mounting bracket for horizontal 1U Rack PDUs
AR8417
Description
ConnectorCord
APC
Type
LengthSKU
Temp. sensor
RJ-45
3.9 m
AP9335T
Temp. and humidity sensor
RJ-45
3.9 m
AP9335TH
Note: Environmental sensors only compatible with AP8000 Series Rack PDUs.
Each Rack PDU includes one environmental sensor port for an optional sensor.
*Brackets for AP7000 series Rack PDUs only
18
19
Rack LCD Consoles
KVM Switches
Rack LCD Consoles
APC SKU
17" Rack LCD console
AP5717
19" Rack LCD console
AP5719
> Ultra-thin 17" or 19" LCD monitor
KVM Switches with CAT-5 Type Connection
APC SKU
32-port Digital Enterprise IP KVM
with Virtual Media, two remote users
KVM2132P
16-port Digital Enterprise IP KVM
with Virtual Media, two remote users
KVM2116P
16-port Digital IP KVM with Virtual Media
one remote user
KVM1116P
> Easy to install
16-port Analog Enterprise KVM with Virtual Media,
two local users
KVM0216A
> Localized keyboard versions available;
check www.apc.com for availability
16-port Analog KVM, one local user
KVM0116A
8-port Analog KVM, one local user
KVM0108A
KVM USB Server Module
KVM-USB
KVM PS/2 Server Module
KVM-PS2
KVM USB Server Module with Virtual Media
KVM-USBVM
KVM PS/2 Server Module with Virtual Media
KVM-PS2VM
KVM USB Server Module with Virtual Media
and CAC Support
KVM-USBVMCAC
KVM Serial Server Module
KVM-SERIAL
KVM to APC Rack PDU Power Management Cable
AP5641
KVM 1U Bracket for rear mount behind Rack LCD Console
KVM Access Software License Upgrade
to Enterprise (1,024 Nodes)
> Integrated keyboard with number pad
> USB port for external media
> Space saving 1U design
> Touchpad mouse
Rack LCD Console
with Integrated KVM Switch
Cable
Length
APC SKU
17" Rack LCD console
with integrated 8-port KVM Switch
1.8 m
AP5808
KVM-LCDMOUNT
17" Rack LCD console
with integrated 16-port KVM Switch
1.8 m
AP5816
SEKVM1024N
KVM USB cable 1.8 m
AP5821
KVM USB cable 3.0 m
AP5822
KVM USB cable 5.2 m
AP5823
* KVM PS/2 cables available, see cables for coaxial type connection on page 20.
Rear view of AP5202
KVM Switches with Coaxial Type Connection
APC SKU
8-port analog KVM
AP5201
16-port analog KVM
AP5202
Cables for Coaxial
Type Connection 0.6 m
0.9 m
KVM USB cable
KVM PS/2 cable
3.7 m
7.6 m
The functionality of a Rack LCD console and an analog KVM
switch in one convenient package optimizes U-space in the rack
environment and eliminates cable clutter. Daisy-chain with AP5201
or AP5202 for additional ports.
AP5253 AP5257 AP5261
AP5264 AP5250 AP5254 AP5258
KVM Daisy-chain cable AP5262
20
0.5 m
Rear view of AP5816
AP5263
21
Receptacle and Plug Types
Voltage
Amps Typical
Rating
# Wires
Plug Name
Mating Connector
100 – 120 V
15 A
1.4 kW
3
NEMA 5-15P
NEMA 5-15R
20 A
1.9 kW
3
NEMA 5-20P
NEMA 5-20R
20 A
1.9 kW
3
NEMA L5-20P
NEMA L5-20R
30 A
2.9 kW
3
NEMA L5-30P
NEMA L5-30R
200 – 240 V
15 A
2.5 kW
3
IEC C14
IEC C13
16 A
3.7 kW
3
IEC 309 16 A, 2P, 3W
IEC 309 16 A, 2P, 3
20 A
3.3 kW
3
IEC C20
IEC C19
20 A
3.3 kW
3
NEMA L6-20P
NEMA L6-20R
30 A
5.0 kW
3
NEMA L6-30P
NEMA L6-30R
32 A
7.4 kW
3
IEC 309 32 A, 2P, 3W
IEC 309 32 A, 2P, 3W
208 V
Three-phase
20 A
5.8 kW
5
NEMA L21-20P
NEMA L21-20R
30 A
8.7 kW
5
NEMA L21-30P
NEMA L21-30R
50 A
12.5 – 14.4 kW
4
CS8365C
CS8364C, CS8369
60 A
16.2 – 17.3 kW
4
IEC 309 60 A, 3P, 4W
IEC 309 60 A, 3P, 4W
400 – 415 V
Three-phase
16/20 A
11 kW
5
IEC 309 16/20 A, 3P, 5W
IEC 309 16/20 A, 3P, 5W
32 A
22 kW
5
IEC 309 32 A, 3P, 5W
IEC 309 32 A, 3P, 5W
40 A
23 kW
5
IEC 309 60 A, 3P, 5W
IEC 309 60 A, 3P, 5W
Extended Warranties*
APC by Schneider Electric offers extended warranties that provide a
continuation of coverage beyond the original factory warranty period.
This service extends the security and protection provided by your factory
warranty and ensures that your product will be repaired or replaced if
necessary, at no additional charge. Extended warranties are available
for purchase in one year increments.
This service is available for all Rack PDUs, Rack ATSs, Rack LCD consoles,
and KVM switches, and includes:
> Technical support from product-specific support engineers to
assist with questions or concerns
>C
ross shipment of parts or replacement product — no waiting
for your critical equipment
Add an extended warranty to your shopping cart on www.apc.com for new
purchases or purchase an extended warranty for your existing product.
*Check with your local sales representative for extended warranty services available
22
23
Find out more:
The Rack PDU Selector is located at:
www.apc.com/tools/selector/pdu
Test drive a metered or switched Rack PDU at:
testdrive.apc.com
www.apc.com
©2012 Schneider Electric. All Rights Reserved. Schneider Electric, APC, InfraStruxure,
StruxureWare, and NetShelter are trademarks owned by Schneider Electric Industries SAS
or its affiliated companies. All other trademarks are the property of their respective owners.
998-1165125_US
Download PDF