Motorola | Digital XTS 3000 | ACCESSORIES AND BATTERIES ASTRO® System Products

ACCESSORIES AND BATTERIES
ASTRO® System Products
Motorola Quality...
Motorola Original®
Accessories let you
make the most of your Motorola radio’s
capabilities.
You likely chose your Motorola portable or mobile radio for its
exceptional quality and reliability — certainly a sound business
decision. Choosing Motorola Original® accessories for your
radio is also the right call to make.
For starters, every Motorola Original® accessory is
performance-matched for Motorola radios — designed, built
and rigorously tested to the same quality standards. So you
can be sure that every product in this catalog will perfectly
complement your radio’s performance.
What’s more, insisting on Motorola Original® accessories can
help increase your productivity. That’s because you can count
on every accessory to do its job time after time. If you take a
chance on a mismatched antenna or a cut-rate microphone,
your radio may not perform at the moment you have to use it.
We’re pleased to bring you this collection of proven
Motorola Original® accessories for your demanding mobile
communication needs. You’ll find external speakers designed
for high noise environments. Both palm and desk top
microphones that deliver enhanced performance. Sirens that
come through loud and clear in emergencies. Antennas for
virtually any vehicle application and more. They’re all ready to
help you work smarter, harder and with greater confidence.
table of contents...
Whether in hot pursuit or investigating a cold
case, communication can be made much easier
with a CommPort™ Integrated Microphone/
Receiver System.
How the Book is Organized
Motorola Quality
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Portable Radios
ASTRO Digital XTS 3000TM/ XTS 4250TM. . . . . . . . . . . . . . . . . . . 2-21
ASTRO Digital XTS 1500TM/ XTS 2250TM. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-39
Mobile Radios
XTLTM 1500/ XTL 2500/ XTL 5000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-45
1
ASTRO® XTS 3000/ XTS 4250 portables
Police
Whether in hot pursuit or
investigating a cold case,
communication can be made
much easier with a CommPort™
Integrated Microphone/Receiver
System.
Fire
It takes two hands for climbing
ladders and controlling hoses,
and solutions like our Chest Pack
provide both welcome freedom
and valued protection in the heat
of the action.
Emergency Response
First responders deserve firstclass tools for communicating
their position and conditions, and
our Lightweight Headsets help
everyone quickly and clearly get
the message.
Security
From crowd control to answering
an alarm signaling illegal entry, a
Remote Speaker Microphone lets
professionals respond instantly
without need to reach for the
radio controls.
2
A S T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
RMN5089, RMN5067,
RMN5088, RMN5066
CommanderTM Series
Remote Speaker
Microphones are the
perfect choice for Mission Critical
environments.
precision controlled signalling and priority scanning capability...
ASTRO® Digital XTS 3000 / XTS 4250 radios provide exceptional power in a comfortable, ergonomic design. All models feature precision-controlled signaling, priority scanning capabilities and X-Pand™ Audio Enhancement. And it’s easy to reprogram each radio as your communication needs change.
3
microphones and audio
Spend more time on mission-critical
communications — and less time
having to ask “what’s your location?”
with HMN4080 GPS Remote Speaker
Microphone
RLN4941
Discreet
GPS Remote Speaker Microphone
Communication
An earphone jack located
on the microphone head
allows the user to receive
AARLN4885
discreet audio when
used with the earpieces
shown here. Compatible
The Global Positioning System (GPS) Remote Speaker
Microphone allows ASTRO® Digital XTS 2250 and XTS 4250
portable two-way radio users in outdoor locations to be
automatically tracked by satellite. For optimal GPS coverage, a
clear view of sky with no obstructions is required. GPS operation
may be limited in buildings, tunnels, parking garages and areas
with heavy tree coverage.
HMN4080† GPS Remote Speaker Microphone
(fully submersible)
HMN4084†
GPS Remote Speaker Microphone with audio jack (compatible with AARLN4885, RLN4941, WADN4190)
with the CommanderTM
Remote Speaker
Microphone and Remote
Speaker Microphone with
Emergency Button on
page 5.
4
Compatible with the ASTRO® Digital XTS 2250 and XTS 4250
portable two-way radio (Models I, II, III and Ruggedized), XTS 2250 radio must have tanapa version B hardware and a radio
host code R10.00.00 or later. XTS 4250 radios must have a radio
host code of R06.01.00 or later, Customer Programming Software
(CPS) version R06.00.00 or later.
†
WADN4190
A S T R O
®
Di g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
for tough conditions...
Remote Speaker Microphones (RSM)
These compact Remote Speaker Microphones are water-resistant and allow talking and listening
without removing the radio from the belt or case. They have a 6-foot coiled cord assembly, 3.5mm
earjack, swivel clip and quick disconnect latch.
NMN6193* NMN6191* 0104010J46 RMN5038
Remote Speaker Microphone
Noise-Cancelling Remote Speaker Microphone, 3.5mm plug
Replacement Coil Cord Assembly for Remote Speaker Microphone
Remote Speaker Microphones - CommanderTM Series
The Commander™ Remote Speaker Microphone features an emergency button, volume control,
16-channel select knob with tactile feedback, 2 programmable buttons and a receive-only
3.5mm earphone jack (not included in submersible model). Ideal for firefighters, police and other
professionals who frequently keep their XTS two-way radio inside a case or under clothing. These
microphones have controls on the microphone head, allowing operational control from the microphone
head.
AARMN5021* RMN5023* RMN5089
RMN5067
RMN5088
RMN5066
Commander Remote Speaker Microphone
Fully Submersible Commander Remote Speaker Microphone
For a completely submersible radio/microphone system use with XTS 3000R, XTS 3500R and XTS 5000R portable radios.
Commander II RSM, Water Resistant with 3.5 Audio Jack, Channel Selector
Commander II RSM, Water Resistant without 3.5 Audio Jack, Channel Selector
Commander II Plus RSM, with Channel Selector Fully Submersible
Commander II Plus RSM, without Channel Selector Fully Submersible
RMN5021
Remote Speaker Microphone with Emergency Button
The orange button on the microphone head can be used to signal that the operator needs help.
This microphone offers high/low volume control and has a 3.5mm earjack on the microphone head.
Emergency activation from the RSM is delayed until programmed Mandown Pre-alert and Post-alert
delays elapse. Depending on radio model, factory defaults or previous programming could set the
delay times for as long as 8 to 120 seconds.
RMN5038*
Remote Speaker Microphone with Emergency Button
Remote Speaker Microphone Audio Accessories
The following earpieces are compatible with the Commander Remote Speaker Microphone
RMN5021A and Remote Speaker Microphone with Emergency Button RMN5038.
RLN4941*
AARLN4885*
WADN4190*
Receive-Only Earpiece with Translucent Tube and Rubber Eartip
Receive-Only Covered Earbud
Receive-Only Flexible Earpiece, 3.5mm plug
NMN6250
UHF Public Safety Microphones (PSM)
Public Safety Speaker Microphones include straight cord assembly, 3.5mm earjack, swivel clip, quick
disconnect latch, antenna connector and receive audio high/low toggle switch. Use with radio’s
antenna, sold separately. All require RF adapter NTN8327, sold separately.
NMN6247* NMN6250* NMN6251* NTN8327*
Public Safety Microphone with 30 Inch Straight Cord
Public Safety Microphone with 24 Inch Straight Cord
Public Safety Microphone with 18 Inch Straight Cord
RF Adapter. Required for use with all Public Safety Microphones.
Mandown, Public Safety Tilt Switch
The Mandown, Public Safety Tilt Switch functions as an external emergency switch that is activated
when the radio unit is tilted at an angle greater than 60 degrees. No other audio accessory can be
attached to the radio while the tilt switch is attached. Radio must be programmed to enable the
emergency tilt feature.
NTN7660* Mandown, Public Safety Tilt Switch
Epaulet Straps
Black leather Epaulet Strap secures Remote Speaker Microphone to epaulet on shirt or jacket
and accommodates back clip in leather cut-outs. Snap closure secures cord to allow reliable
communications in hostile environments.
RLN4294 RLN4295 Epaulet Strap, Velcro
Epaulet Strap, with Clip
*Intrinsically Safe (FM)
5
audio
Surveillance Kits
Surveillance accessories allow the radio user to privately receive messages with the earpiece and are ideal when
environments require discreet communication. The following surveillance accessories require the 3.5mm threaded adapter
jack BDN6676 that attaches to the radio, unless being used with speaker microphone.
1-WIRE SURVEILLANCE KITS
BDN6664* Receive-Only Earpiece with Standard Earphone (1-Wire). Beige.
BDN6665*† Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire). Beige.
BDN6726* Receive-Only Earpiece with Standard Earphone (1-Wire). Black
BDN6727*† Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire). Black
2-WIRE SURVEILLANCE KITS
BDN6667* Earpiece with Microphone and Push-to-Talk Combined (2-Wire). Beige.
BDN6669*†
Extra Loud Earpiece with Microphone and Push-to-Talk Combined (2-Wire). Beige.
BDN6729* Earpiece with Microphone and Push-to-Talk Combined (2-Wire). Black.
BDN6731*† Extra Loud Earpiece with Microphone and Push-to-Talk Combined (2-Wire). Black.
3-WIRE SURVEILLANCE KITS
BDN6668* Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Beige.
BDN6670*†
Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Beige.
BDN6730* Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Black
BDN6732*† Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Black
Surveillance Kits - With Extended-Wear Comfort Earpiece
These kits include an extended-wear comfort earpiece with rubber eartip and
clear, comfortable acoustic tube. Users hear transmissions clearly, while the
clear tube provides a discreet appearance.
RLN5314 RLN5313 RLN5311 RLN5312 RLN6230
Comfort Earpiece, Receive-Only. Beige.
Comfort Earpiece, Receive-Only. Black.
Earpiece w/Microphone and PTT Combined (2-Wire). Beige.
Earpiece w/Microphone and PTT Combined (2-Wire). Black.
Noise Kits
Extreme Noise Kits provide extra comfort and/or noise protection for users wearing
surveillance accessories. Lightweight, translucent tube attaches to Motorola surveillance accessories to provide flexibility and comfort. Clothing clip prevents
accessory from being pulled from the ear due to body movement or head rotation.
For optimal performance, Extra Loud Earphones are recommended for Noise Kits.
RLN6232 BDN6676
6
RLN5311
RLN6230 RLN6232
5080369E39†
5080370E91†
BDN6676* 5080384F72
5080370E97
RLN5313
Extreme Noise Kit. Includes 2 foam earplugs. (Black) For high-noise environments. Noise reduction = 24dB.
Can be used with Clear Comfortable Earpieces, sold separately.
Low Noise Kit - Clear Acoustic Tube Assembly
Includes 1 rubber eartip. For low noise environments.
Does not provide hearing protection.
Extra Loud Earphone. Beige.
Extra Loud Earphone. Black.
SURVEILLANCE REPLACEMENT ACCESSORIES
3.5mm Jack Adapter with Quick Disconnect Latch
Replacement Foam Plugs. Pack of 50 From left to right, For use with NTN8370. Noise reduction rating = 24dB.
top to bottom:
Replacement Standard Rubber Eartips, Clear. Pack of 25. For use with NTN8371.
RLN4765
RLN4762
Clear Comfortable Earpieces
RLN4764
The Clear Comfortable Earpiece forms to the inside of the ear and is perfect
RLN4761
for low noise environments. It’s made of easy-to-clean, chemically-inert hypoRLN4763
allergenic material. Compatible with NTN8371 and all Surveillance Kits.
RLN4760
RLN4760
Small Custom Earpiece - Right Ear
RLN4761
Medium Custom Earpiece - Right Ear
RLN4762
Large Custom Earpiece - Right Ear
RLN4763
Small Custom Earpiece - Left Ear
RLN4764
Medium Custom Earpiece - Left Ear
*Intrinsically Safe (FM)
RLN4765
Large Custom Earpiece - Left Ear
†
Extra loud earphone (exceeds OSHA limits)
AS T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
discreet communication...
RLN4922
RLN4922
Completely
Discreet
Earpiece.
Completely Discreet Wireless Earpiece Kit
Enables users to communicate with ease, in full privacy, without visible equipment.
This miniaturized receiver is discreetly hidden in the ear, where it can be worn
comfortably for long periods of time. Small as it is, it offers a full range of audio
functions including automatic squelch, automatic gain control and noise filtering.
Average battery life is approximately 100 hours and includes an end-of-life warning
signal when the battery needs to be changed. Kit includes wireless receiver, inductive
neckloop, 6 spare batteries and 5 spare earguards. For use with any standard 2 or
3-Wire Motorola Surveillance Kit.
RLN4922
RLN4919
RNN4005
The Completely Discreet Earpiece is easy
to use, just remove the earpiece from any
standard 2 or 3-Wire Surveillance Kit and
plug in the neckloop, which is easily hidden
under clothing. Security personnel will be able to wear
this tiny receiver comfortably for hours at a time!
Completely Discreet Earpiece Kit
Replacement Earguards. 5 per pack.
Replacement 1.4 Volt Batteries. 6 per pack.
Ear Microphone Systems (EMS)
This compact, lightweight unit picks up sound through bone vibrations in the ear canal. The
miniature earpiece leaves the hands-free and face unobscured, good for rescue and emergency
personnel that must retain the ability to help, hear and speak directly to others...those not on the
communication system. EMS may be worn with protective masks without reduction in clarity of
sound. It’s ideal for high-noise environments. Available in PTT or Voice-Activated (VOX). Interface
Module is required and sold separately.
BDN6677*
BDN6678*
BDN6641*
BDN6643* EMS with PTT Interface. Black. For standard noise levels (up to 95dB).
EMS with PTT Interface. Beige. For standard noise levels p to 95dB).
EMS with PTT Interface. Grey. For high-noise levels (up to 105dB).
Push-to-Talk and Voice-Activated Interface Module
0180300E25
0180358B38*
0180300E83*
0180358B32
0180358B33
0180358B34
0180358B35
0180358B36
0180358B37
4280369E44
5080358B28
5080358B29
5080358B30
5080358B31
0180305J46 OPTIONAL ACCESSORIES FOR THE EMS
Earguard with Adjustable Loop
Remote Push-to-Talk Ring Switch.
Remote Push-to-Talk Body Switch.
Earholder. Black, size small. Secures Ear Microphone in ear.
Earholder. Black, size medium. Secures Ear Microphone in ear.
Earholder. Black, size large. Secures Ear Microphone in ear.
Earholder. Clear, size small. Secures Ear Microphone in ear.
Earholder. Clear, size medium. Secures Ear Microphone in ear.
Earholder. Clear, size large. Secures Ear Microphone in ear.
Replacement Belt Clip with Screws
Eartips. Black, size medium. Pack of 10.
Eartips. Black, size large. Pack of 10.
Eartips. Beige, size medium. Pack of 10.
Eartips. Beige, size large. Pack of 10.
Training CD-ROM
For Ear Microphone System and Temple Transducer.
BDN6677
EMS with Push-to-Talk
Interface Module.
0180300E83
EMS with Body
Push-to-Talk
Switch.
0180300E25
*Intrinsically Safe (FM)
7
audio
Take advantage
of these high-quality
Motorola Original®
audio accessories
that offer
The CommPort System is
ideal for firefighters and other public safety professionals because
it’s compatible with most
headgear and airmasks.
clear reception,
NTN1663
lightweight convenience
and all-day comfort.
CommPort: Integrated Microphone/Receiver System
The CommPort System’s advanced, self-adjusting microphone and miniature receiver connect to a two-way radio and make it
possible to communicate under the most adverse conditions. A variety of Push-to-Talk options allow the user to customize the
CommPort system for almost any application.
NTN1624* NTN1625* NTN1663* NTN1736* NNTN4186* NKN6510 NKN6512 NKN6525 NNTN4188 NKN6508 NTN8819*
NTN8821 NTN8986 NTN8988 RLN5037 4285838B01 4202006A01 BDN6676 8
Integrated Ear Microphone/Receiver System with Palm PTT
Includes 3.5mm adapter BDN6676.
Integrated Ear Microphone/Receiver System with PTT on Radio Adapter
Includes 3.5mm adapter BDN6676.
Integrated Ear Microphone/Receiver System with Ring PTT
Includes 3.5mm adapter BDN6676.
Integrated Ear Microphone/Receiver System with Snap-On-Side PTT
Includes 3.5mm adapter BDN6676.
Integrated Ear Microphone/Receiver System with Body PTT
Includes 3.5mm adapter BDN6676.
O P T I O N A L A C C E S S O R I E S F O R C O M M P O R T NTN1624
Replacement Palm PTT Cable for NTN1624
Replacement Ring PTT Cable for NTN1663
Replacement Snap-On-Side PTT Cable for NTN1736
Replacement Remote PTT Body Switch for NNTN4186
Replacement Cable for NTN1625
Ear Microphone Assembly
CommPort Maintenance Kit. Includes 10 replacement ear tubes, 10 microphone seal strips and 2 windscreens.
Adhesive Pads. For secure attachment to ear. Pack of 90.
Ear Straps. For secure attachment to ear. Pack of 10.
Replacement Ear Tubes. Pack of 10.
Replacement Collar Clip
Replacement Back Cover Clip
3.5mm Jack Adapter with Quick Disconnect Latch
*Intrinsically Safe (FM)
AS T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
mission critical essentials...
BDN6719
Flexible Ear Receiver
This receive-only earpiece contains a flexible earloop and speaker which rests external to the ear.
Black, without volume control. It plugs directly into adapter BDN6676 or the earjack on speaker
microphones.
BDN6719 BDN6676 7580372E11 Flexible Ear Receiver with 3.5mm Threaded Plug
Adapter BDN6676 required if not used with speaker microphones.
3.5mm Jack Adapter with Quick Disconnect Latch
Replacement Foam Ear Cushion for BDN6717.
Pellet-Style Earpieces
Pellet-style earpieces allow users to receive communication discreetly and are comfortable for extended-wear use.
BDN6780* BDN6781* BDN6676* 7580372E70 Earbud with Microphone and Push-to-Talk. Requires adapter BDN6676.
Earbud, receive-only. Requires adapter BDN6676 unless being used with a speaker or microphone.
3.5mm Jack Adapter with Quick Disconnect Latch
Replacement Foam Cushion for Pellet Earpieces
RMN4049
BDN6780
Temple Transducer
The Temple Transducer represents a significant achievement in headset design and functionality.
It allows the user to receive audio without covering the ear. The receiver portion of this accessory
rests on the temples and is capable of converting the receive audio from a two-way radio into sound
vibration. The sound vibration is transmitted through the surrounding human tissue and bone directly
into the inner ear where it is received by the user. It features an In-line PTT and noise-cancelling
boom microphone.The Temple Transducer enhances communication and safety by not impairing the
user’s hearing of the external sound environment, such as machinery and equipment, warning and fire
alarms, the intercom, traffic and even casual conversations with co-workers.
RMN4049* 0180305J46 Temple Transducer
Training CD-ROM. For Ear Microphone System and Temple Transducer.
RMN5049
Rugged Temple Transducer
The Rugged Temple Transducer comes equipped with all the features of the basic model. It sports
a bigger Push-to-Talk button and a larger noise-cancelling boom microphone. It is fully adjustable
for different head sizes, making it comfortable for extended-wear. Over-the-head band allows users
to wear helmets, hardhats and other head gear – and it really stays in place. Water-resistant boom
microphone is ideal for use in blowing rain and the secure cap on PTT prevents accidental activation
in mission critical situations.
RMN5049*
Rugged Temple Transducer
*Intrinsically Safe (FM)
9
audio
The Racing Headset
The same winning quality
RMN5015 lets and dependability you see
at professional football
stadiums and motor
speedways can be yours
with Motorola Original®
users take charge...
in spite of high background
noise.
accessories.
Racing Headset
This heavy-duty headset can be worn with most hard hats. Ideal for high-noise
environments; racing teams like CART® use it in the pits for dependable communication.
Adapter Cable required.
RMN5015 BDN6673
Racing Headset with Noise-Cancelling Swivel Boom Microphone
Behind-the-Head style. Noise reduction rating = 24dB
Adapter Cable for RMN5015
Receive-Only Headsets
Receive-Only Headsets are the right choice for high-noise environments where users
must hear information clearly, but seldom need to transmit. Dual-Muff headsets
feature easily replaceable earseals filled with a liquid and foam combination to provide
excellent protection from outside noise as well as comfort. These are for use with
Remote and Public Safety Speaker Microphones with a 3.5mm threaded jack. They can
also be plugged directly into the radio when used with BDN6676.
RMN4056 RMN4057 BDN6676 Receive-Only Dual-Muff Headband Style Headset. For use with with 3.5mm threaded jack. Can be plugged directly into radio with 3.5mm adapter BDN6676. Noise reduction = 24dB.
Receive-Only, Dual-Muff, Hardhat Headset. Mounts easily to hard
hats with slots. For use with remote and public safety microphones with 3.5mm threaded jack. Can be plugged directly into radio with 3.5mm adapter BDN6676.
3.5mm Jack Adapter with Quick Disconnect Latch
Lightweight Headsets
Lightweight headsets provide high-clarity, hands-free, discreet two-way communication,
while maintaining the comfort necessary for extended-wear in moderate noise
environments. Audio adapter BDN6676 required.
NMN6245 NMN6246 NKN6498 BDN6676 10
NMN6245
Single-Muff Lightweight Headset with In-Line PTT Switch
Requires audio adapter BDN6676.
Ultra-Light Headset with Boom Microphone, In-Line PTT Switch
Earbud style receiver. Requires audio adapter BDN6676.
Headset Adapter Cable. For use with NMN1020
3.5mm Jack Adapter with Quick Disconnect Latch
NMN6246
AS T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
clearly understood...
RMN4053A
Noise-Cancelling Headsets with Boom Microphone
Ideal for two-way communication in extremely noise environments. Dual-Muff, tactical headsets
include 2 microphones on outside of earcups which reproduce ambient sound back into headset.
Harmful sounds are suppressed to safe levels and low sounds are amplified up to 5 times original
level, but never more than 82dB. Has on/off volume control on earcups. Easily replaceable ear seals
are filled with a liquid and foam combination to provide excellent sealing and comfort. 3-foot coiled
cord assembly included. Adapter Cable RKN4095 required. Hardhat not included.
RMN4052
RMN4053
RKN4095
RLN4923
Tactical Headband Style Headset. Grey, Noise reduction = 24dB.
Tactical Hardhat Mount Headset. Grey, Noise reduction = 22dB.
Adapter Cable with In-Line Push-to-Talk For use with RMN4052/RMN4053, RMN4051
REPLACEMENT EARSEALS
Replacement Earseals for RMN4051/RMN4052/RMN4053
Includes 2 snap-in earseals.
Hardhat Mount Headset With Noise-Cancelling Boom Microphone
RMN4051
Ideal for two-way communication in high-noise environments, this headset mounts easily to hardhats
with slots, or can be worn alone. Easily replaceable ear seals are filled with a liquid and foam
combination to provide excellent sealing and comfort. 3-foot coiled cord assembly included. Noise
reduction of 22dB. Intrinsically Safe (FM). Separate In-line PTT Adapter Cable RKN4095 required.
Hardhat not included.
RMN4051
RKN4094
RKN4095 Two-way, Hardhat Mount Headset w/Noise-Cancelling Boom Microphone. Black.
Adapter Cable with In-Line Push-to-Talk. For use with RMN4051.
In-Line PTT Adapter Cable. For use with RMN4051/RMN4052/RMN4053.
Medium Weight Headsets
Medium weight headsets offer high-clarity sound, with the additional hearing protection necessary to
provide consistent, clear, two-way radio communication in harsh, noisy environments or situations.
NMN6258* Medium Weight, Dual-Muff, Over-the-Head Style Headset with In-line PTT
Noise reduction rating = 24dB.
NMN6259*
Medium Weight, Dual-Muff, Behind-the-Head Style Headset Can be worn with hardhat. Noise reduction rating = 24dB.
BDN6645
Heavy-Duty Headsets
Heavy-duty headsets include noise-cancelling boom microphones and can be worn with or without
a hardhat. The Push-to-Talk switch is located on the earcup. On voice-activated models, the VOX
module is contained within the headset. Headsets are for use in noise levels up to 125dB. Heavy-duty
headsets require radio adapter cable BDN6673, sold separately.
BDN6645* BDN6635 BDN6636* BDN6673*
Push-to-Talk Headset with Boom Microphone
Requires adapter cable BDN6673. Noise reduction rating = 24dB.
Voice-Activated (VOX) Headset with Boom Microphone
Requires adapter cable BDN6673. Noise reduction rating = 24dB.
Voice-Activated (VOX) Headset with Throat Microphone
Requires adapter cable BDN6673. Noise reduction rating = 24dB.
Radio Adapter Cable
*Intrinsically Safe (FM)
11
carrying accessories
Leather and Nylon Carrying Cases
You’d be surprised how
much time can be saved in
emergencies when each
user’s radio is always in
the same
place — made
easy by this versatile
case selection of
Motorola Original
®
carry accessories
A variety of carrying accessories are available for comfort and convenience. NTN8385
The carrying cases are available in sizes designed to fit radios with a battery and permit audio to be heard clearly. Leather cases are constructed of top grain, 8 ounce
leather and all stainless steel hardware, Motorola carry cases were developed to meet the demands of public safety and other users who operate in the most rigorous of environments.
NTN8387 NTN8385 NTN8386 NTN8725 MODEL I RADIOS ONLY
Leather Carry Case with Belt Loop, D-rings and T-strap
High-Activity Swivel Leather Case
Features 2.5 Inch swivel belt loop,D-rings and T-strap.
High-Activity Swivel Leather Case
Features 3 Inch swivel belt loop, D-rings and T-strap.
High-Activity Nylon Case with Belt Loop and T-strap
NTN8382 NTN8380 NTN8381 NTN8725 NTN9184 MODEL II & III RADIOS ONLY
NTN8380
Leather Case with Belt Loop, D-rings and T-strap
High-Activity Swivel Leather Case
Features 2.5 Inch swivel belt loop, D-rings and T-strap.
High-Activity Swivel Leather Case
Features 3 Inch swivel belt loop, D-rings and T-strap.
High-Activity Nylon Case with Belt Loop and T-strap
Leather Case with Belt Loop. For Clamshell Battery.
Carrying Accessories
NTN8383 NTN8384 T-STRAPS
Leather T-strap, Plain Action Snap
Leather T-strap, Hard Action Snap
Provides additional strength at the snap.
NTN8039 NTN8040 HIGH-ACTIVITY BELT LOOPS
2.5 Inch Leather Swivel Belt Loop
3 Inch Leather Swivel Belt Loop
NTN8266 NTN8460 BELT CLIPS
Standard Removable 2.25 Inch Belt Clip Attachment
Public Safety 3 Inch Belt Clip Attachment
NTN5243 CARRYING STRAP
Adjustable, Black Nylon Carrying Strap
Attaches to D-ring on cases.
NTN8381
NTN8460
NTN8040
NTN8039
NTN5243
12
AS T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
Universal Chest Pack
HLN6602
RLN4815
has adjustable
shoulder and
waist straps.
Chest Pack
Motorola Original® Universal Chest Pack protects the radio and provides the freedom from
holding it during standby communication mode. Universal Chest Pack fits virtually any radio.
HLN6602
1505596Z02
Universal Chest Pack with Radio Holder, Pen Holder and Velcro Secured Pouch
Replacement Strap for HLN6602/RLN4570
Break-A-Way Chest Pack
All the features of the original Universal Chest Pack (HLN6602) plus break-a-way tabs that
allow the entire pack to be pulled off with approximately 10 lbs. of pressure.
RLN4570
Break-a-Way Chest Pack with Radio Holder, Pen Holder and Velcro Secured Pouch. 1505596Z02
Replacement Strap for HLN6602/RLN4570
RLN4570
Universal RadioPAkTM
The RadioPAk is lightweight and comfortable. Worn around the
waist, it keeps radios/phones at hand. It features a separate 6 x
8 inch zippered pouch for other on-the-job necessities. Adjustable
woven nylon belt fits both men and women.
RLN4815
4280384F89
RadioPAk Radio/Utility Case
RadioPAk Extension Belt
For waists larger than 40 inches.
Unlike rigid holders, the universal-fit
RadioPAk is lightweight and comfortable.
An ideal companion for two-way radios,
as well as iDEN® portables and cellular
phones.
Waterproof Bag
HLN9985
Waterproof Bag with Large Strap
Portable Radio Hangers
Portable Radio Hangers slide over and hangs from the vehicle door panel allowing
convenient, easy mounting. Radio belt clip required.
TDN9327
TDN9373
Portable Radio Hanger for door panels up to 2.75 inches.
Portable Radio Hanger for door panels 2.75 to 3.25 inches.
TDN9327, TDN9373
13
batteries and chargers
Battery Characteristics
NiCd batteries provide
the maximum number of
charge/discharge cycles
and are best suited for
temperature extremes.
NiMH batteries
provide more
NTN8299_R
talk-time per shift
and are less prone
to memory effect.
Li-Ion batteries
offer the best
power-to-weight ratio
of all chemistries,
Batteries
NTN8294_R NTN8295_R* NTN8297_R*
PREMIUM NICKEL CADMIUM - NiCd
NiCd, 1525 mAh 7.5 Volt.
NiCd, 1525 mAh 7.5 Volt.
NiCd, 1525 mAh 7.5 Volt., Ruggedized.
NTN8299_R* NTN8923_R RNN4006 RNN4007_R* PREMIUM NICKEL METAL HYDRIDE - NiMH
NiMH, 1700 mAh 7.5 Volt.
NiMH, 1800 mAh 7.5 Volt
NiMH, 3500 mAh 7.5 Volt
NiMH, 3500 mAh 7.5 Volt.
NTN9177 NTN9183 PREMIUM ALKALINE BATTERY SHELLS
Disposable Battery Shell–Black
Twelve AA Alkaline batteries required, sold separately.
Disposable Battery Shell–Orange
Twelve AA Alkaline batteries required, sold separately.
IMPRES™ Batteries
with no memory effect.
IMPRES batteries, when used with an IMPRES charger, provide automatic, adaptive reconditioning, end-of-life display and other advanced features.
Data is stored in the battery and communicated to the charger via a unique
IMPRES communication protocol which is designed to maximize talk-time
and optimize battery cycle life – all automatically.
HNN9031 HNN9032*
NNTN4435 NNTN4436* NNTN4437* NTN9862 NNTN7335
14
NiCd, 1525 mAh 7.5 Volt
NiCd, 1525 mAh 7.5 Volt.
NiMH, 1800 mAh 7.5 Volt
NiMH, 1700 mAh 7.5 Volt.
NiMH, 1700 mAh 7.5 Volt., Ruggedized.
Li-Ion, 2750 mAh 7.2 Volt
Li-lon, 2700 mAh 7.2 Volt
*Intrinsically Safe (FM)
IMPRES Batteries
AS T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
essential power...
Single-Unit, Rapid-Rate, Universal Charger
These tri-chemistry chargers support Nickel Cadmium, Nickel Metal Hydride and Lithium-ion batteries. They will rapid charge most batteries to 90% capacity in one to two hours and employ trickle and maintenance modes that ensure batteries are safely charged to full-capacity.
NTN1667 NTN1668
RPX4749 Universal Charger, 110 Volt, US Plug
Universal Charger, 220 Volt, Euro Plug
Charger Base with Transformer, 230 Volt, UK Plug
NTN1667
Motorola Conditioning Charger (MCC)
The MCC features Instant Fault Detection technology that detects faulty batteries in seconds. You’ll
know right away when a battery won’t operate at peak performance - saving you time and trouble.
Each unit rapidly charges NiCd and NiMH batteries and optimizes battery performance. It’s patented
negative pulse charging process minimizes overheating and overcharging, extending useful battery
life. Batteries can be left on the charger for extended periods of time, without worry of heat build-up. Optional accessories are available that allow the MCC to be used in both AC and DC environments – that’s flexibility.
WPLN4086_R WPLN4087_R WPPN4002_R WPPN4006_R WPPN4021_R WPPN4065_R
WPPN4065_R
Charger Kit, 110 Volt AC. Includes single-unit base and 7 Volt adapter plate.
Charger Kit, 220 Volt AC. Includes single-unit base and 7 Volt adapter plate.
110 Volt AC Single-Unit Base Charger Only
Adapter plates sold separately.
220 Volt AC Single-Unit Base Charger Only
Adapter plates sold separately.
7 Volt Adapter Plate
Multi-Unit Conditioning Charger, 4-Station Base, 110 Volt. Adapter plates sold separately.
Motorola Conditioning Chargers are not compatible with NiMH batteries RNN4006B and RNN4007AR.
Vehicular Mounting
RLN4814
3080384M21 Vehicular Mounting Bracket and Hard Wire Cable For Single-Unit Motorola Conditioning Chargers. Includes DC Hard Wire Cable 3080384M21.
DC Hard Wire Cable with 3 A In-line fuse.
Vehicular Power Adapter
3080384G15
Vehicular Power Adapter
RLN4814
WPPN4002_R
Single-Unit Base Charger and
power supply shown with
optional Vehicular Power
Adapter 3080384G15.
15
chargers
IMPRES™ Smart Energy Systems
Through the use of its advanced charging algorithm and automatic reconditioning features,
the IMPRES Smart Energy System ensures maximum talk-time and optimized battery cycle
life. This smart energy system automatically reconditions impres batteries based on actual
usage, keeping them in peak condition. Talk-time and cycle life are optimized and the need
for manual maintenance programs is eliminated. Its advanced conditioning features allow
batteries to be safely left on the charger for extended periods of time without incurring the
damaging heat build-up which can decrease battery cycle life. In addition, batteries left
in the charger are kept fully charged so they are always ready when needed. This rapidrate, tri-chemistry charging system will also charge compatible non-IMPRES batteries and
supports multiple radio platforms including SABER, XTS and HT 1000 Series portables.
WPLN4111_R
WPLN4130
IMPRES™ Single-Unit Chargers
WPLN4111_R WPLN4112_R WPLN4113_R 5889254E01 impres Single-Unit Charger, 110 Volt, US Plug
impres Single-Unit Charger, 220 Volt, Euro Plug
impres Single-Unit Charger, 240 Volt, UK Plug
Battery Adapter. Required for NTN4538_R,
NTN4593_R, NTN7014_R and NTN8818 batteries.
IMPRES™ Multi-Unit Chargers
WPLN4108_R WPLN4109_R WPLN4110_R 4385922B01 NLN7967 impres Multi-Unit Charger, 110 Volt, US Plug
impres Multi-Unit Charger, 220 Volt, Euro Plug
impres Multi-Unit Charger, 240 Volt, UK Plug
Battery Adapter. Required for NTN4538_R, NTN4593_R, NTN7014_R and NTN8818 batteries.
Wall Mount for Multi-Unit Chargers
IMPRES™ Multi-Unit Chargers with Display Modules
Charger Display Modules provide powerful, “real time” analyzing information for impres
batteries, including current charge status, battery mAh, percent rated capacity and battery
voltage. Readout displays battery kit number, serial number and chemistry and the time
remaining to complete the charge for NiCd and NiMH batteries. It also forecasts the number
of cycles to next reconditioning and more.
WPLN4130 WPLN4131_R WPLN4132_R NLN7967 Display Readout
IMPRES Multi-Unit Charger with Display Modules, 110 Volt, US Plug
IMPRES Multi-Unit Charger with Display Modules, 220 Volt, Euro Plug
IMPRES Multi-Unit Charger with Display Modules, 240 Volt, UK Plug
Wall Mount for Multi-Unit Charger
IMPRES™ Individual Charger Display Module
This module is compatible with the standard impres™ Multi-Unit Charger WPLN4108_R,
WPLN4109_R and WPLN4110_R. Up to 6 modules can be used per charger, one for each
charging pocket. Includes detailed installation instructions.
RLN5382 Charger Display Module for IMPRES Multi-Unit Charger Version 1.3 or Later.
Note: Display Modules compatible with Multi-Unit Charger version 1.2 or earlier require a
software flash update.
Version number is located on label on the bottom of the impres™ Multi-Unit charger. If
no version is shown, it is earlier than version 1.2. Version 1.2 will appear as V1.20, 1.3 will
appear as V1.30, etc.
RLN5382
IMPRES™ CD
This CD provides an interactive guide to the IMPRES Charging System. It outlines the
benefits and gives examples of application usage.
0180305J70 16
IMPRES CD
AS T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
essential power systems...
Battery Maintenance SystemPLUS (BMSPLUS)
4 2 5 0
WPLN4079_R
Increase the useful life of your batteries. Using interchangeable battery adapters (sold separately), the BMSPLUS is capable of charging and discharging, analyzing, conditioning and cycle testing batteries. It supports NiCd, NiMH and Li-Ion battery chemistries (Li-Ion 6-station units only) and tracks better voltage and capacity (mAh). Its easy-to-use design supports hundreds of two-way, cellular and camcorder batteries.
The BMSPlus offers a 3-year warranty and includes serial printer* port (RS-232).
WPLN4079_R
WPLN4080_R
WPLN4081_R
WPPN4085_R
NDN4005
NDN4006
6-Station BMSPLUS, 110 Volt AC, 50/60 Hz, US Plug
6-Station BMSPLUS, 230 Volt AC, 50/60 Hz, Euro Plug
6-Station BMSPLUS, 230 Volt AC, 50/60 Hz, UK Plug
BMSPLUS Li-Ion Field Upgrade Kit. Upgrades WPLN4079_R, WPLN4080_R, WPLN4081_R.
Allows units to support Li-Ion batteries.
3-Station BMS, 110 Volt AC, 50/60 Hz. Does not support Li-Ion or 3-cell batteries.
3-Station BMS, 230 Volt AC, 50/60 Hz
Does not support Li-Ion or 3-cell batteries.
*Compatible with the STAR Micronics SP200 series printers and other printers with STAR printer emulation.
STAR Micronics printers are available through STAR Micronics distributors.
Battery Maintenance SystemPLUS (BMSPLUS) Adapters
WPPN4019_R WPPN4022_R WPPN4086_R Adapter. Compatible with NiCd batteries only.
Adapter. Compatible with both NiCd and NiMH batteries.
Adapter. Compatible with NiCd, NiMH and Li-Ion batteries.
WPN4124_R
Battery Optimizing System II (BOS II)
No other battery analyzer matches the speed, accuracy, versatility and ease-of-use of the BOS II in providing
powerful analyzing capabilities. Users can select from 12 pre-programmed service programs making it quick
and easy to get up and running. Because the BOS II is programmable, users can create custom programs to
perform a wide variety of tasks specific to individual needs. New enhancements include new navigation keys and an improved, more intuitive menu system. Regular use of the BOS II can optimize battery performance and help extend battery life, helping reduce battery replacement costs.
WPLN4124_R BOS II, 4-Station, 90-264 Volt AC, US Plug. Adapter Plates Required.
WPLN4125_R BOS II, 4-Station, 90-264 Volt AC, Euro/UK Plug. Adapter Plates Required.
RL75765 BOS II Battery Adapter. For use with ASTRO XTS 3000 and XTS 4250 radios.
• Quicktest™ diagnostic feature measures a battery’s state of health in approximately 2 to 5 minutes
• Supports NiCd, NiMH, Li-Ion and SLA batteries
• Increased power-programmable from 100 mAh to 4 Amps per station
• Programmable adapters allow customization of maintenance routines
• Proprietary reduction cycle restores NiCd and NiMH batteries
• Printer output for reports and labels with computer interface (Includes both 9-pin serial and 25-pin parallel ports)
• 100-Watt Universal Power Supply (110-240 VAC) provides up to 4 amps of power per station
• Interchangeable adapter plates accommodate nearly all Motorola two-way batteries and other major brands
17
vehicular chargers
Vehicular Travel Charger
A great traveling companion that ensures constant communication while
on the road. Its small compact design allows the radio to be used while
rapid charging in the charger base. Unit includes a voltage regulated
vehicular charger adapter, custom charger base, mounting bracket and coil cord.
RLN4884
RLN5914
Vehicular Travel Charger
Universal Mounting Bracket for RLN4884.
Includes screws and nylon strap cord.
2580600E05
2580600E06
2580600E07
2580600E08
TRAVEL CHARGER TRANSFORMERS
Transformer, 120 Volt, US
Transformer, 230 Volt, European
Transformer, 230 Volt, UK
Transformer, 220 Volt, Argentina
Vehicular Charger
This vehicular charger is a 12 Volt DC unit that supports NiCd, NiMH and
Li-Ion batteries for XTS 3000 and XTS 4250. A microprocessor senses
the type of battery installed and controls the rate-of- charge accordingly.
Batteries are charged at a rapid-rate until fully charged at which point
the unit reverts to a trickle charge. Batteries can be charged while on
the radio or stand alone. The radio can be operated while in the charger
and this unit is PAC RT compatible. The vehicular charger consists of a
console, mounting hardware and supply cable.
WPLN4208
WPLN4208
18
Vehicular Charger
RLN4884
AS T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
power for the road...
NTN8560
Vehicular Adapters offer quick
radio release and dead battery
operation. They are powered by
attaching the radio supply cable
to the 12 Volt battery located inside a police car, utility truck or other vehicle.
Vehicular Adapters
Allow users to adapt XTS 3000, XTS 4250 or XTS 5000 portable radios for mobile operation. They provide
in-vehicle rapid and trickle charging for NiCd, NiMH and Li-Ion batteries. These units offer quick radio
release and dead battery operation and are powered by attaching the radio supply cable to the 12 Volt
battery located inside a police car, utility truck or other vehicle. Connectors are provided for the vehicle’s
external antenna, mobile microphone and optional amplified loudspeaker HSN1000 – these are required
to allow operation of the portable radio in a way that is similar to that of a mobile.There is also a general
interface connector for additional accessories. A color LED indicates battery recharge status. For XTVA
operation, a microphone and RF Switch NTN8327 are required.
NTN8561
NTN8560
NTN1607
NTN1606
XTS Vehicular Adapter. Closed Face with Limited Keypad Access, Mini-UHF.
XTS Vehicular Adapter. Open Face with Limited Keypad Access, Mini-UHF.
XTS Vehicular Adapter. Closed Face, BNC.
XTS Vehicular Adapter. Open Face with Limited Keypad Access, BNC.
NTN8941 NTN8943 ADAPTER KITS FOR ACCESSORIES
XTVA Data Cable Kit. Required for additional accessories, sold separately.
XTVA Accessory Adapter Kit. Required for additional accessories, sold separately.
NTN8940 NTN8270 NTN8327 REQUIRED ACCESSORIES FOR VEHICULAR ADAPTERS
Trunnion. Required for operation.
Tool Wrench for RF Switch. Required for operation.
RF Adapter. Required for operation.
PLN7737 HSN1000 HLN9330 GLN7280 NKN6455 OPTIONAL ACCESSORIES FOR VEHICULAR ADAPTERS
Hand Held Control Head
External Speaker, Amplified, 6-Watt
Emergency Foot Switch
Emergency Push Button
MTVA PA/Speaker Cable
19
antennas
Antenna Characteristics
Heliflex antennas are
engineered for maximum
output and coverage.
Stubby antennas are
non-obtrusive, ideal for
wearing the radio
on a belt.
Whip antennas are
one-piece with a steel core
for optimal radiation.
20
AS T R O
®
D i g i t a l
X TS
3 0 0 0 / XTS
4 2 5 0
tuned and tested...
Flexible Whip
Flexible whip antennas have a one-piece finish and steel core for optimal
radiation characteristics. They provide more comfort when radio is worn on the
belt.
8505241U05 8505241U03 8505241U11 6 Inch Flexible Whip Antenna, 403-520 MHz
7 Inch Flexible Whip Antenna, 806-869 MHz
7 Inch Flexible Whip, Dual Band Antenna, 764-870 MHz
8505644V01
8505644V04
Helical
Helical antennas are sturdy and dependable. Each antenna is designed and built
to quality standards. The skirt at the base of the connector helps to seal out
damaging elements.The connector is made of plated brass material for long life.
8505644V01 8505644V02 8505644V03 8505644V04 8505644V05 8505644V06 8505241U05
6 Inch Helical Antenna, 136-151 MHz
6 Inch Helical Antenna, 151-162 MHz
6 Inch Helical Antenna, 162-174 MHz
3 Inch Helical Antenna, 403-435 MHz
3 Inch Helical Antenna, 435-470 MHz
3 Inch Helical Antenna, 470-520 MHz
8505644V03
8505241U06
Wideband
Wideband antennas are ideal when the radio is used in different frequencies
since one antenna will cover all ranges.
8505518V01 8 Inch Wideband Antenna, 136-174 MHz
Stubby
This quarterwave stubby antenna is ideal when the radio is worn on a belt
because the short antenna is unobtrusive. This broad band antenna can be used
for both 800 and 900 MHz applications.
8505241U06 4 Inch Stubby Antenna, 806-941 MHz
21
XTS 1500/ XTS 2250 portables
Police
Whether in hot pursuit or
investigating a cold case,
communication can be made
much easier with a CommPort™
Integrated Microphone/Receiver
System.
Fire
It takes two hands for climbing
ladders and controlling hoses, and
solutions like our Chest Pack
provide both welcome freedom
and valued protection in the heat
of the action.
Emergency Response
First responders deserve
first-class tools for communicating
their position and conditions, and
our Lightweight Headsets help
everyone quickly and clearly
get the message.
Security
From crowd control to answering
an alarm signaling illegal entry, a
Remote Speaker Microphone lets
professionals respond instantly
without the need to reach for
the radio controls.
22
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
“Yes Captain...
we put the engine fire
out, the ambulance
just got here, so we’re
heading back to the
station.”
high performance in a small size...
ASTRO® Digital XTS 1500TM/ XTS 2250TM radios offer high performance capability in an easy-to-use small size.
Lightweight and convenient to carry, these radios feature Noise Reduction Software for enhanced audio quality and
support multiple system configurations to match your needs.
23
microphones and accessories
NMN6191 NoiseIn the case.
Out of the case.
Cancelling Remote
In. Out.
Speaker Microphone
It’s more efficient
is the perfect choice
to leave a radio
when you must be
in place and wear a
heard the first time.
microphone on a uniform
RMN5038
AARLN4885
jacket or shirt collar — and
Motorola Original® audio
accessories
make it possible.
WADN4190
RLN4941
The Remote Speaker Microphone with Emergency
Button has an earphone jack located on the
microphone head that allows the user to receive
discreet audio when used with the following
earpieces RLN4941, AARLN4885 and WADN4190.
24
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
for tough conditions...
NMN6193
Remote Speaker Microphones (RSM)
These compact Remote Speaker Microphones are water-resistant and allow talking and listening
without removing the radio from the belt or case. They have a 6-foot coiled cord assembly, 3.5mm
earjack, swivel clip and quick disconnect latch.
NMN6193* NMN6191* 0104010J46 Remote Speaker Microphone
Noise-Cancelling Remote Speaker Microphone
Replacement Coil Cord Assembly for Remote Speaker Microphone
Remote Speaker Microphone with Emergency Button
The orange button on the microphone head can be used to signal that the operator needs help.
This microphone offers high/low volume control and has a 3.5mm earjack on the microphone head.
Emergency activation from the RSM is delayed until programmed Mandown Pre-alert and Postalert delays elapse. Depending on radio model, factory defaults or previous programming could set
the delay times for as long as 8 to 120 seconds.
RMN5038*
Remote Speaker Microphone with Emergency Button
Public Safety Microphones (PSM)
Public Safety Speaker Microphones include straight cord assembly, 3.5mm earjack,
swivel clip, antenna connector and receive audio high/low toggle switch. Use with radio’s
antenna, sold separately. RF adapter is included. Not for use in VHF frequency bands.
RMN5072* RMN5073* RMN5074* RMN5038
Public Safety Microphone with 30 Inch Straight Cord
Public Safety Microphone with 24 Inch Straight Cord
Public Safety Microphone with 18 Inch Straight Cord
RSM/PSM Audio Accessories
The following earpieces are compatible with the Remote Speaker Microphone with Emergency
Button RMN5038 and Public Safety Microphones RMN5072, RMN5073 and RMN5074.
RLN4941
AARLN4885
WADN4190
Receive-Only Earpiece with Translucent Tube and Rubber Eartip
Receive-Only Covered Earbud
Receive-Only Flexible Earpiece
Epaulet Straps
Black leather Epaulet Strap secures Remote Speaker Microphone to epaulet on shirt or jacket
and accommodates back clip in leather cut-outs. Snap closure secures cord to allow reliable
communications in hostile environments.
RLN4294 RLN4295 RMN5072
Epaulet Strap, Velcro
Epaulet Strap, with Clip
RLN4294
RLN4295
*Intrinsically Safe (FM)
25
audio
Surveillance Kits
Surveillance accessories allow the radio user to privately receive messages with the earpiece and are ideal when
environments require discreet communication. The following surveillance accessories require the 3.5mm threaded adapter
jack BDN6676 that attaches to the radio, unless being used with speaker microphone.
1-WIRE SURVEILLANCE KITS
BDN6664* Receive-Only Earpiece with Standard Earphone (1-Wire). Beige.
BDN6665*† Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire). Beige.
BDN6726* Receive-Only Earpiece with Standard Earphone (1-Wire). Black
BDN6727*† Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire). Black
BDN6666* Receive-Only Earpiece with Volume Control and Earloop (1-Wire). Beige.
BDN6728* Receive-Only Earpiece with Volume Control and Earloop (1-Wire). Black.
2-WIRE SURVEILLANCE KITS
BDN6667* Earpiece with Microphone and Push-to-Talk Combined (2-Wire). Beige.
BDN6669*†
Extra Loud Earpiece with Microphone and Push-to-Talk Combined (2-Wire). Beige.
BDN6729* Earpiece with Microphone and Push-to-Talk Combined (2-Wire). Black.
BDN6731*† Extra Loud Earpiece with Microphone and Push-to-Talk Combined (2-Wire). Black.
3-WIRE SURVEILLANCE KITS
BDN6668* Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Beige.
BDN6670*†
Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Beige.
BDN6730* Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Black
BDN6732*† Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire). Black
Surveillance Kits - With Extended-Wear Comfort Earpiece
These kits include an extended-wear comfort earpiece with rubber eartip and clear, comfortable acoustic tube. Users hear
transmissions clearly, while the clear tube provides a discreet appearance.
RLN6230
RLN5314
RLN5313
RLN5311
RLN5312
Receive-Only Comfort Earpiece. Beige.
Receive-Only Comfort Earpiece. Black.
Earpiece w/Microphone and PTT Combined (2-Wire). Beige.
Earpiece w/Microphone and PTT Combined (2-Wire). Black.
RLN5311
Noise Kits
Extreme Noise Kits provide extra comfort and/or noise protection for users
wearing surveillance accessories. Lightweight, translucent tube attaches to
Motorola surveillance accessories to provide flexibility and comfort. Clothing
clip prevents accessory from being pulled from the ear due to body movement or
head rotation. For optimal performance, Extra Loud Earphones are recommended
for Noise Kits.
RLN6232
BDN6676
26
RLN6230 RLN6232
5080369E39†
5080370E91†
BDN6676* 5080384F72
5080370E97
Extreme Noise Kit. Includes 2 foam earplugs. Black.
For high-noise Noise reduction =24dB. Can be used with Clear Comfortable Earpieces, sold separately.
Low Noise Kit - Clear Acoustic Tube Assembly
Includes 1 rubber eartip. For low noise environments, does not provide hearing protection.
Extra Loud Earphone. Beige.
Extra Loud Earphone. Black.
SURVEILLANCE REPLACEMENT ACCESSORIES
3.5mm Jack Adapter with Quick Disconnect Latch
Replacement Foam Plugs. Pack of 50
For use with NTN8370. Noise reduction rating = 24dB.
Replacement Standard Rubber Eartips. Clear. Pack of 25. For use with NTN8371.
Clear Comfortable Earpieces
The Clear Comfortable Earpiece forms to the inside of the ear and is perfect
for low noise environments. It’s made of easy-to-clean, chemically-inert hypoallergenic material. Compatible with NTN8371 and all Surveillance Kits.
RLN4760
RLN4761
RLN4762
RLN4763
RLN4764
RLN4765
Small Custom Earpiece - Right Ear
Medium Custom Earpiece - Right Ear
Large Custom Earpiece - Right Ear
Small Custom Earpiece - Left Ear
Medium Custom Earpiece - Left Ear
Large Custom Earpiece - Left Ear
RLN5313
From left to right, top to bottom:
RLN4765
RLN4762
RLN4764
RLN4761
RLN4763
RLN4760
*Intrinsically Safe (FM)
†
Extra loud earphone (exceeds OSHA limits)
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
discreet communication...
RLN4922
RLN4922
Completely
Discreet
Earpiece.
Completely Discreet Wireless Earpiece Kit
Enables users to communicate with ease, in full privacy, without visible equipment.
This miniaturized receiver is discreetly hidden in the ear, where it can be worn
comfortably for long periods of time. Small as it is, it offers a full range of audio
functions including automatic squelch, automatic gain control and noise filtering.
Average battery life is approximately 100 hours and includes an end-of-life warning
signal when the battery needs to be changed. Kit includes wireless receiver, inductive
neckloop, 6 spare batteries and 5 spare earguards. For use with any standard 2 or
3-Wire Motorola Surveillance Kit.
RLN4922
RLN4919
Completely Discreet Earpiece Kit
Replacement Earguards. 5 per pack.
Ear Microphone Systems (EMS)
This compact, lightweight unit picks up sound through bone vibrations in the ear canal. The
miniature earpiece leaves the hands-free and face unobscured, good for rescue and emergency
personnel that must retain the ability to help, hear and speak directly to others...those not on the
communication system. EMS may be worn with protective masks without reduction in clarity of
sound. It’s ideal for high-noise environments. Available in PTT or Voice-Activated (VOX). Interface
Module is required and sold separately.
BDN6677*
BDN6678*
BDN6641*
BDN6708* BDN6671* EMS with PTT Interface. Black. For standard noise levels (up to 95dB).
EMS with PTT Interface. Beige. For standard noise levels (up to 95dB).
EMS with PTT Interface. Grey. For high-noise levels (up to 105dB).
Push-to-Talk Only Interface Module
Push-to-Talk and Voice-Activated Interface Module
0180300E25
0180358B38*
0180300E83*
0180358B32
0180358B33
0180358B34
0180358B35
0180358B36
0180358B37
4280369E44
5080358B28
5080358B29
5080358B30
5080358B31
0180305J46 OPTIONAL ACCESSORIES FOR THE EMS
Earguard with Adjustable Loop
Remote Push-to-Talk Ring Switch.
Remote Push-to-Talk Body Switch.
Earholder. Black, size small. Secures Ear Microphone in ear.
Earholder. Black, size medium. Secures Ear Microphone in ear.
Earholder. Black, size large. Secures Ear Microphone in ear.
Earholder. Clear, size small. Secures Ear Microphone in ear.
Earholder. Clear, size medium. Secures Ear Microphone in ear.
Earholder. Clear, size large. Secures Ear Microphone in ear.
Replacement Belt Clip with Screws
Eartips. Black, size medium. Pack of 10.
Eartips. Black, size large. Pack of 10.
Eartips. Beige, size medium. Pack of 10.
Eartips. Beige, size large. Pack of 10.
Training CD-ROM
For Ear Microphone System and Temple Transducer.
*Intrinsically Safe (FM)
The Completely Discreet Earpiece is easy
to use, just remove the earpiece from
any standard 2 or 3-Wire Surveillance Kit
and plug in the neckloop, which is easily hidden under
clothing. Security personnel will be able to wear this tiny
receiver comfortably for hours at a time!
BDN6677
EMS with Push-to-Talk
Interface Module.
0180300E83
EMS with Body
Push-to-Talk
Switch.
0180300E25
27
audio
The CommPort System is
Take advantage
of these high-quality
Motorola Original®
audio accessories
that offer
ideal for firefighters and other public safety professionals because
it’s compatible with most
headgear and airmasks.
NTN1663
clear reception,
lightweight convenience
and all-day comfort.
CommPort: Integrated Microphone/Receiver System
The CommPort System’s advanced, self-adjusting microphone and miniature receiver connect to a two-way radio and make it
possible to communicate under the most adverse conditions. A variety of Push-to-Talk options allow users to customize the
CommPort System for almost any application.
NTN1624* NTN1625* NTN1663* NTN1736* NNTN4186* NKN6510 NKN6512 NKN6525 NNTN4188 NTN8819*
NKN6508 NTN8821 NTN8986 NTN8988 RLN5037 4285838B01 4202006A01 BDN6676 28
Integrated Ear Microphone/Receiver System with Palm PTT
Includes 3.5mm adapter BDN6676.
Integrated Ear Microphone/Receiver System with PTT on Radio Adapter
Includes 3.5mm adapter BDN6676.
Integrated Ear Microphone/Receiver System with Ring PTT.
Includes 3.5mm adapter BDN6676.
Integrated Ear Microphone/Receiver System with Snap-On-Side PTT
Includes 3.5mm adapter BDN6676.
Integrated Ear Microphone/Receiver System with Body PTT
Includes 3.5mm adapter BDN6676.
OPTIONAL ACCESSORIES FOR COMMPORT
Replacement Palm PTT Cable for NTN1624
NTN1624
Replacement Ring PTT Cable for NTN1663
Replacement Snap-On-Side PTT Cable for NTN1736
Replacement Remote PTT Body Switch for NNTN4186
Ear Microphone Assembly
Replacement Cable for NTN1625
CommPort Maintenance Kit
Includes 10 replacement ear tubes, 10 microphone seal strips and 2 windscreens.
Adhesive Pads. For secure attachment to ear. Pack of 90.
Ear Straps. For secure attachment to ear. Pack of 10.
Replacement Ear Tubes. Pack of 10.
Replacement Collar Clip
Replacement Back Cover Clip
3.5 mm Jack Adapter with Quick Disconnect Latch
*Intrinsically Safe (FM)
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
mission critical essentials...
RMN4049
Pellet-Style Earpieces
Pellet-style earpieces allow users to receive
communication discreetly and are comfortable for
extended-wear use.
BDN6780 BDN6781 7580372E70 BDN6676 Earbud with Microphone and Push-to-Talk Requires adapter BDN6676.
Earbud, receive-only. Requires BDN6676 adapter unless being used with a speaker or microphone.
Replacement Foam Cushion for Pellet Earpieces
3.5mm Jack Adapter with Quick Disconnect Latch
BDN6780
Temple Transducer
The Temple Transducer represents a significant achievement in headset design and functionality.
It allows the user to receive audio without covering the ear. The receiver portion of this accessory
rests on the temples and is capable of converting the receive audio from a two-way radio into sound
vibration. The sound vibration is transmitted through the surrounding human tissue and bone directly
into the inner ear where it is received by the user. It features an In-line PTT and noise-cancelling
boom microphone.The Temple Transducer enhances communication and safety by not impairing the
user’s hearing of the external sound environment, such as machinery and equipment, warning and fire
alarms, the intercom, traffic and even casual conversations with co-workers.
RMN4049* 0180305J46 RMN5049
Temple Transducer
Training CD-ROM. For Ear Microphone System and Temple Transducer.
Rugged Temple Transducer
The Rugged Temple Transducer comes equipped with all the features of the basic model. It sports
a bigger Push-to-Talk button and a larger noise-cancelling boom microphone. It is fully adjustable
for different head sizes, making it comfortable for extended-wear. Over-the-head band allows users
to wear helmets, hardhats and other head gear – and it really stays in place. Water-resistant boom
microphone is ideal for use in blowing rain and the secure cap on PTT prevents accidental activation
in mission critical situations.
RMN5049*
Rugged Temple Transducer
*Intrinsically Safe (FM)
29
audio
The same winning quality
and dependability you see
at professional football
stadiums and motor
speedways can be yours
with Motorola Original®
accessories.
The Racing Headset
RMN5015 lets users
take charge... in
spite of high background noise.
RMN5015
Racing Headset
This heavy-duty headset can be worn with most hard hats.
Ideal for high-noise environments; racing teams like CART®
use it in the pits for dependable communication. Adapter
Cable required.
RMN5015 BDN6673
30
Racing Headset with Noise-
Cancelling Swivel Boom Microphone
Behind-the-Head style.
Noise reduction rating = 24dB.
Adapter Cable for RMN5015
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
clear communication...
RMN4053
Noise-Cancelling Headsets With Boom Microphone
Ideal for two-way communication in extremely noisy environments. Dual-Muff, tactical headsets
include two microphones on the outside of the earcups which reproduce the ambient sound back
into the headset. Harmful sounds are suppressed to a safe level and low sounds are amplified up
to 5 times the original level, but never more than 82dB. Includes on/off volume control on earcups
and 3-foot coiled cord. Easily replaceable earseals are filled with liquid and foam combination to
provide excellent sealing and comfort. Requires RKN4095 In-line PTT adapter cable. Hardhat not included.
RMN4052 RMN4053 RKN4095 Tactical Headband Style Headset, Grey. Noise Reduction Rating = 24dB.
Requires RKN4095 Adapter Cable
Tactical Hardhat Mount Headset, Grey. Noise Reduction Rating = 22dB.
Requires RKN4095 Adapter Cable.
In-Line PTT Adapter Cable For use with RMN4051, RMN4052 and RMN4053 headsets.
Hardhat Mount Headset With Noise-Cancelling Boom Microphone
RMN4051
Ideal for two-way communication in high-noise environments, it mounts easily to hardhats with
slots and has an excellent noise reduction of 22dB. Easily replaceable earseals are filled with
liquid and foam combination to provide excellent sealing and comfort. 3-foot coiled cord assembly.
Requires RKN4095 In-line PTT Adapter Cable.
Hardhat not included.
RMN4051
Two-way Hardhat-mount Headset. Black.
Medium Weight Headsets
Medium Weight headsets offer high-clarity sound
with the additional hearing protection necessary
for providing consistent, clear two-way radio
communications in harsh, noisy situations.
NMN6258 NMN6259 Medium Weight Headset, Over-the-Head Style with In-line PTT.
Noise reduction rating = 24dB.
Medium Weight Headset, Behind-the-Head Style with In-line PTT.
Noise reduction rating = 24dB.
NMN6258
BDN6645
Heavy-Duty Headsets
Heavy-duty headsets include noise-cancelling boom microphones and can be worn with or without
a hardhat. The Push-to-Talk switch is located on the earcup. On voice-activated models, the VOX
module is contained within the headset. Radio adapter cable BDN6640 required, sold separately.
BDN6645* BDN6635* BDN6636* BDN6673* Push-to-Talk Headset with Boom Microphone
Requires adapter cable BDN6640. Noise reduction rating = 24dB.
Voice-Activated (VOX) Headset with Boom Microphone
Requires adapter cable BDN6640. Noise reduction rating = 24dB.
Voice-Activated (VOX) Headset with Throat Microphone
Requires adapter cable BDN6640. Noise reduction rating = 24dB.
Radio Adapter Cable
*Intrinsically Safe (FM)
31
carrying accessories
Leather Carrying Cases
You’d be surprised
how much time
can be saved in
emergencies when
each user’s radio
is always in the
A variety of carrying accessories are available for comfort and convenience. The
carrying cases are available in sizes designed to fit radios with a battery and permit
audio to be heard clearly. Motorola carry cases were developed to meet the demands
of public safety and other users who operate in the most rigorous of environments.
Leather cases are constructed of top grain, 8 ounce leather and all stainless steel
hardware. High-activity cases have a swivel D-ring button and belt loop. To remove
case from belt loop, rotate case 180 degrees and slide case upward, out of the holder.
Case stays on belt more securely in high-activity applications while allowing the radio
to swing freely with body movements.
NNTN4115 NNTN4116 NNTN4117 made easy by this
versatile case
selection of
Motorola Original®
carry accessories.
Leather Case with High-Activity Swivel
Features 3 inch swivel belt loop, D-rings and T-strap.
Leather Case with High-Activity Swivel
Features 2.5 inch swivel belt loop, D-rings and T-strap.
Leather Case with Belt Loop
Features 3 inch belt loop, D-rings and T-strap.
Nylon Carrying Case
NTN7247 same place —
Nylon Case with Snap Belt Loop and T-strap
NTN7247
Carrying Accessories
NTN8383
NTN8384 T-STRAPS
Leather T-strap, Plain Action Snap
Leather T-strap, Hard Action Snap
NTN8039
NTN8040
HIGH-ACTIVITY BELT LOOPS
Leather Swivel Belt Loop. 2.5 Inches.
Leather Swivel Belt Loop. 3 Inches.
HLN6853 HLN9844 BELT CLIPS
2.25 Inch Spring Action Belt Clip
2 Inch Removable Belt Clip Attachment
NTN5243 CARRYING STRAP
Adjustable, Black Nylon Carrying Strap
Attaches to D-ring on case.
NTN5243
NTN8040
NTN8039
HLN9844
32
NNTN4115
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
Universal Chest Pack
HLN6602 has
adjustable
RLN4815
shoulder and
waist straps.
Chest Pack
Motorola Original® Universal Chest Pack protects the radio and provides the freedom from
holding it during standby communication mode. Universal Chest Pack fits virtually any radio.
HLN6602
1505596Z02
Universal Chest Pack with Radio Holder, Pen Holder and Velcro Secured Pouch
Replacement Strap for HLN6602/RLN4570
Break-A-Way Chest Pack
All the features of the original Universal Chest Pack (HLN6602) plus break-a-way tabs that
allow the entire pack to be pulled off with approximately 10 lbs. of pressure.
RLN4570
Break-a-Way Chest Pack with Radio Holder, Pen Holder and Velcro Secured Pouch. 1505596Z02
Replacement Strap for HLN6602/RLN4570
RLN4570
Universal RadioPAkTM
The RadioPAk is lightweight and comfortable. Worn around the
waist, it keeps radios/phones at hand. It features a separate 6 x
8 inch zippered pouch for other on-the-job necessities. Adjustable
woven nylon belt fits both men and women.
RLN4815
4280384F89
RadioPAk Radio/Utility Case
RadioPAk Extension Belt
For waists larger than 40 inches.
Unlike rigid holders, the universalfit RadioPAk is lightweight and
comfortable. An ideal companion for
two-way radios, as well as iDEN®
portables and Cellular phones.
Waterproof Bag
HLN9985
Waterproof Bag with Large Strap
Portable Radio Hangers
Portable Radio Hangers slide over and hang from the vehicle door panel allowing convenient,
easy mounting. Radio belt clip required.
TDN9327
TDN9373
Portable Radio Hanger for door panels up to 2.75 Inches.
Portable Radio Hanger for door panels 2.75 to 3.25 Inches.
TDN9327, TDN9373
33
batteries and chargers
Battery Characteristics
NiCd batteries provide
the maximum number of
charge/discharge cycles
and are best suited for
temperature extremes.
NiMH batteries
provide more
talk-time per shift
and are less prone
to memory effect.
Li-Ion batteries
offer the best
power-to-weight ratio
of all chemistries,
with no memory effect.
Batteries NTN9815 NTN9816* PREMIUM NICKEL CADMIUM - NiCd
NiCd, 1525 mAh 7.5 Volt
NiCd, 1525 mAh 7.5 Volt.
IMPRES™ Batteries
IMPRES batteries, when used with an IMPRES charger, provide automatic,
adaptive reconditioning, end-of-life display and other advanced features. Data
is stored in the battery and communicated to the charger via a unique IMPRES
communication protocol which is designed to maximize talk-time and optimize
battery cycle life – all automatically.
NTN9858 NTN9857* NNTN6263*
NNTN7335
NiMH, 1850 mAh 7.5 Volt
NiMH, 1700 mAh 7.5 Volt.
NiMH, 1700 mAh 7.5 Volt., Ruggedized.
Li-lon, 2700 mAh 7.2 Volt
Single-Unit, Rapid-Rate, Universal Charger
These tri-chemistry chargers support Nickel Cadmium, Nickel Metal Hydride and Lithium-ion batteries. They will rapid charge most batteries to 90% capacity in one to two hours and employ trickle and maintenance modes that ensure batteries are safely charged to full-capacity.
NTN1667 NTN1668 RPX4749 Universal Charger, 110 Volt,
Universal Charger, 220 Volt,
Charger Base with Transformer, 230 Volt UK Plug
NTN1667
34
*Intrinsically Safe (FM)
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
Motorola Conditioning Charger (MCC)
The MCC features Instant Fault Detection technology that detects faulty batteries in seconds. You’ll
know right away when a battery won’t operate at peak performance - saving you time and trouble. Each
unit rapidly charges NiCd and NiMH batteries and optimizes battery performance. It’s patented, negative
pulse charging process minimizes overheating and overcharging, extending useful battery life. Batteries
can be left on the charger for extended periods of time, without worry of heat build-up. Optional
accessories are available that allow the MCC to be used in both AC and DC environments - that’s
flexibility.
WPPN4002_R
WPLN4168_R WPPN4098_R WPPN4065_R
WPPN4065_R
Base Charge Unit, 110 Volt AC. Adapter plates sold separately.
MCC Kit, 110 Volt AC. Includes single-unit base and adapter plate
XTS Adapter plate only
Multi-Unit Conditioning Charger, 4-Station Base, 110 Volt
Adapter plates sold separately.
Vehicular Mounting
RLN4814A
3080384M21 Vehicular Mounting Bracket and Hard Wire Cable For Single-Unit Motorola Conditioning Chargers
Includes DC Hard Wire Cable 3080384M21.
DC Hard Wire Cable with 3 AH In-line fuse.
Vehicular Power Adapter
3080384G15
Vehicular Power Adapter
RLN4814
Vehicular Travel Charger
A great traveling companion that ensures constant communication while on the road. Its small, compact
design allows the radio to be used while rapid charging in the charger base. Unit includes a voltage
regulated vehicular charger adapter, custom charger base, mounting bracket and coil cord.
RLN4884
RLN4914
Vehicular Travel Charger
Universal Mounting Bracket for RLN4884. Includes screws and nylon strap cord.
2580600E05
2580600E06
2580600E07
2580600E08
TRAVEL CHARGER TRANSFORMERS
Transformer, US, 120 Volt
Transformer, European, 230 Volt
Transformer, UK, 230 Volt
Transformer, Argentina, 220 Volt
Vehicular Charger
This vehicular charger is a 12 Volt DC unit that supports NiCd, NiMH and Li-Ion batteries. A microprocessor senses the type of battery installed and controls the rate of charge accordingly.
Batteries are charged at a rapid-rate until fully charged at which point the unit reverts to a trickle
charge. Batteries can be charged while on the radio or stand alone. The radio can be operated
while in the charger and this unit is PAC RT compatible. The vehicular charger consists of a
console, mounting hardware and supply cable.
WPLN4208
RLN4884
WPLN4208
Vehicular Charger
35
chargers
IMPRES™ Smart Energy Systems
Through the use of its advanced charging algorithm and automatic reconditioning features,
the IMPRES Smart Energy System ensures maximum talk-time and optimized battery cycle
life. This smart energy system automatically reconditions impres batteries based on actual
usage, keeping them in peak condition. Talk-time and cycle life are optimized and the need
for manual maintenance programs is eliminated. Its advanced conditioning features allow
batteries to be safely left on the charger for extended periods of time without incurring the
damaging heat build-up which can decrease battery cycle life. In addition, batteries left
in the charger are kept fully charged so they are always ready when needed. This rapidrate, tri-chemistry charging system will also charge compatible non-IMPRES batteries and
supports multiple radio platforms including SABER, XTS and HT 1000 Series portables.
WPLN4111_R
WPLN4130
IMPRES™ Single-Unit Chargers
WPLN4111_R WPLN4112_R WPLN4113_R 5889254E01 impres Single-Unit Charger, 110 Volt, US Plug
impres Single-Unit Charger, 220 Volt, Euro Plug
impres Single-Unit Charger, 240 Volt, UK Plug
Battery Adapter. Required for NTN4538_R,
NTN4593_R, NTN7014_R and NTN8818 batteries.
IMPRES™ Multi-Unit Chargers
WPLN4108_R WPLN4109_R WPLN4110_R NLN7967 impres Multi-Unit Charger, 110 Volt, US Plug
impres Multi-Unit Charger, 220 Volt, Euro Plug
impres Multi-Unit Charger, 240 Volt, UK Plug
Wall Mount for Multi-Unit Chargers
IMPRES™ Multi-Unit Chargers with Display Modules
Charger Display Modules provide powerful, “real time” analyzing information for impres
batteries, including current charge status, battery mAh, percent rated capacity and battery
voltage. Readout displays battery kit number, serial number and chemistry and the time
remaining to complete the charge for NiCd and NiMH batteries. It also forecasts the number
of cycles to next reconditioning and more.
WPLN4130 WPLN4131_R WPLN4132_R NLN7967 Display Readout
IMPRES Multi-Unit Charger with Display Modules, 110 Volt, US Plug
IMPRES Multi-Unit Charger with Display Modules, 220 Volt, Euro Plug
IMPRES Multi-Unit Charger with Display Modules, 240 Volt, UK Plug
Wall Mount for Multi-Unit Charger
IMPRES™ Individual Charger Display Module
This module is compatible with the standard impres™ Multi-Unit Charger WPLN4108_R,
WPLN4109_R and WPLN4110_R. Up to 6 modules can be used per charger, one for each
charging pocket. Includes detailed installation instructions.
RLN5382 Charger Display Module for IMPRES Multi-Unit Charger Version 1.3 or Later.
Note: Display Modules compatible with Multi-Unit Charger version 1.2 or earlier require a
software flash update.
Version number is located on label on the bottom of the impres™ Multi-Unit charger. If
no version is shown, it is earlier than version 1.2. Version 1.2 will appear as V1.20, 1.3 will
appear as V1.30, etc.
IMPRES™ CD
RLN5382
This CD provides an interactive guide to the IMPRES Charging System. It outlines the
benefits and gives examples of application usage.
0180305J70 36
IMPRES CD
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
essential power systems...
Battery Maintenance SystemPLUS (BMSPLUS)
Increase the useful life of your batteries. Using interchangeable battery adapters (sold separately), the BMSPLUS is capable of charging and discharging, analyzing, conditioning and cycle testing batteries. It supports NiCd, NiMH and Li-Ion battery chemistries (Li-Ion 6-station units only) and tracks better voltage
and capacity (mAh). Its easy-to-use design supports hundreds of two-way, cellular and camcorder batteries.
The BMSPlus offers a 3-year warranty and includes serial printer* port (RS-232).
WPLN4079_R
WPLN4080_R
WPLN4081_R
WPPN4085_R
NDN4005
NDN4006
WPLN4079_R
6-Station BMSPLUS, 110 Volt AC, 50/60 Hz, US Plug
6-Station BMSPLUS, 230 Volt AC, 50/60 Hz, Euro Plug
6-Station BMSPLUS, 230 Volt AC, 50/60 Hz, UK Plug
BMSPLUS Li-Ion Field Upgrade Kit
Upgrades WPLN4079AR, WPLN4080_R, WPLN4081_R.
Allows units to support Li-Ion batteries.
3-Station BMS, 110 Volt AC, 50/60 Hz
Does not support Li-Ion or 3-cell batteries.
3-Station BMS, 230 Volt AC, 50/60 Hz
Does not support Li-Ion or 3-cell batteries.
*Compatible with the STAR Micronics SP200 series printers and other printers with STAR printer emulation.
STAR Micronics printers are available through STAR Micronics distributors.
Battery Maintenance SystemPLUS (BMSPLUS) Adapters
WPPN4097_R NiCd and NiMH Adapter, 7.5 Volt
WPN4124_R
Battery Optimizing System II (BOS II)
No other battery analyzer matches the speed, accuracy, versatility and ease-of-use of the BOS II in providing
powerful analyzing capabilities. Users can select from 12 pre-programmed service programs making it quick
and easy to get up and running. Because the BOS II is programmable, users can create custom programs to
perform a wide variety of tasks specific to individual needs. New enhancements include new navigation keys
and an improved, more intuitive menu system. Regular use of the BOS II can optimize battery performance and help extend battery life, helping reduce battery replacement costs.
WPLN4124_R WPLN4125_R RL_76341
BOS II, 4-Station, 90-264 Volt AC, US Plug. Adapter Plates Required.
BOS II, 4-Station, 90-264 Volt AC, Euro/UK Plug. Adapter Plates Required.
Standard Battery Adapter. For use with XTS 2500 radios.
• Quicktest™ diagnostic feature measures a battery’s state of health in approximately 2 to 5 minutes
• Supports NiCd, NiMH, Li-Ion and SLA batteries
• Increased power-programmable from 100 mAh to 4 Amps per station
• Programmable adapters allow customization of maintenance routines
• Proprietary reduction cycle restores NiCd and NiMH batteries
• Printer output for reports and labels with computer interface (Includes both 9-pin serial and 25-pin parallel ports)
• 100-Watt Universal Power Supply (110-240 VAC) provides up to 4 amps of power per station
• Interchangeable adapter plates accommodate nearly all Motorola two-way batteries and other major brands
37
antennas
Antenna Characteristics
Heliflex antennas are
engineered for
maximum output
and coverage.
Stubby antennas are
non-obtrusive,
ideal for wearing
the radio on a belt.
Whip antennas are
one-piece with
a steel core for
optimal radiation.
38
A S T R O
®
D i g i t a l
X TS
1 5 0 0 / XTS
2 2 5 0
tuned and tested...
Flexible Whip
Antenna has a one-piece finish and steel core for optimal strength and better
radiation characteristics. Provides more comfort when radio is worn on the belt.
NAE6549_R
8505241U03 8505241U11 7 Inch Flexible Whip Antenna, 403-520 MHz
7 Inch Flexible Whip Antenna, 806-870 MHz
7 Inch Flexible Whip Dual Band Antenna, 764-870 MHz
Stubby
This quarterwave Stubby Antenna is ideal when radio is worn on the belt
because the short antenna is unobtrusive. This is a broad band antenna that can
be used for both 800 MHz and 900 MHz applications.
8505644V01
8505241U06 8505644V03
4 Inch Stubby Antenna, 806-941 MHz
Helical
Helical antennas are sturdy and dependable. Each antenna is designed and built
to quality standards. The skirt at the base of the connector helps to seal out
damaging elements.The connector is made of plated brass material for long life.
8505644V01 8505644V02 8505644V03 NAE6546_R
NAE6547_R
NAE6548_R 6 Inch Helical Antenna, 136-151 MHz
6 Inch Helical Antenna, 151-162 MHz
6 Inch Helical Antenna, 162-174 MHz
3 Inch Helical Antenna, 403-435 MHz
3 Inch Helical Antenna, 435-470 MHz
3 Inch Helical Antenna, 470-520 MHz
39
ASTRO® XTL 1500/ XTL 2500/ XTL 5000 mobiles
Crowd Control
Keeping people away from
potential dangers is a task
made easier with
Speakers
on board
each vehicle.
Crisis Situations
Day one calls for on-scene
decisions. Day two moves
command to a situation
room. Control Station
Accessories make it easy to
convert radios for inside use.
Utility Repairs
Maximizing worker safety
in high-crime areas is a
number one priority, and an
Emergency Switch is a ready
solution if an alarm or help
message needs to be sent.
Emergency Response
If just one number is heard
wrong, help may not get to
the correct address on time.
An External Speaker can help
make everything clear under
noisy conditions.
40
ASTRO
®
XTL
TM
1500/XTL
2500/
XTL
5000
“This is car 67...
EMS’s expected ETA is twenty-four fifteen,
fire department is on
the scene.”
high performance, quality, reliability and interoperability in daily communications...
ASTRO® XTLTM 1500, XTL 2500 and XTL 5000 mobile radios are ideal for demanding environments — law
enforcement, fire, EMS, government agencies, construction and more. That’s because they support Project 25 and
stand up to your toughest challenges. All models are capable of integrated voice and data service, and accept
FLASHport™ software upgrades so you can add features as your communication needs evolve.
41
audio and control station
Microphones and Accessories
HMN4079
HMN1090
HMN1087
HMN4089
HMN1089
HLN1457
HKN1018
HLN1457
Keypad Microphone
Standard Palm Microphone
Gooseneck Push-to-Talk
Attaches to vehicle steering column.
For use with Visor Microphone.
Visor Microphone, Remote Mount Modified GCAI Palm Microphone
Water-resistant.
Handset with Hang Up Cup with Coiled Cable. Includes cradle.
Hang Up Handset with Normal Armoured Cable
Handset with Hang Up Cup
External Speaker
Provides audio for high ambient noise environments.
HSN4038
External 7.5 Watt Speaker
Motorocycle Speaker
HSN6003
Motorcycle Speaker
Weather-resistant.
HLN6909
Trunnion Kits
HKN6186
HLN6909
HLN6910
HLN6861
42
Control Head Remote Mount Trunnion Kit
Quick Release, High Power Trunnion Kit
High Power Trunnion Kit
For XTL 5000 05 only.
Standard Installation Trunnion Kit
HMN4079
ASTRO
®
XTL
TM
1500/XTL
2500/
XTL
5000
Control Station accessories make the ASTRO XTL 5000 05 a
desktop command center. From left to right are Control Station
Power Supply HPN4007, Control Station Tray HLN6042 and
Desktop Microphone HMN1088.
HLN5113
Control Station Accessories
RMN5070
HLN6042
HLN6925
HPN4007
GCAI Desk Microphone
Desk Tray with Speaker
Control Station Mount
Power Supply, 25-60 Watt Rated.
Emergency Switches
These switches enable the user to send an emergency message to a desktop console, where the signalling unit ID number is displayed and an alarm is sounded.
HLN5113 HLN5131
GLN7278
Emergency Foot Switch
Emergency Push Button
Foot Switch Push-to-Talk
Miscellaneous Hardware
HLN6372
HLN6372
The Emergency Foot
Switch HLN5113
enables the user to
send an emergency
message to a desktop console.
Key Lock Mount
43
antennas
A communication
system is only
as good as
the mobile antennas
used to transmit
and receive —
so whenever
lives are on the line
Motorola Original®
audio accessories
should be the
go-to choice.
Power Cables
HKN4191
HKN4192
HKN6032
HKN6110
10-Foot Power Cable
20-Foot Power Cable
Motorcycle Power Cable
100-Watt Power Cable
Remote Mount Cables
HKN6164
HKN6165
HKN6166
HKN6167
HKN6168
HKN6169
HKN6170
131-Foot Remote Mount Cable – 40 meters
115-Foot Remote Mount Cable – 35 meters
75-Foot Remote Mount Cable – 23 meters
50-Foot Remote Mount Cable – 15 meters
30-Foot Remote Mount Cable – 10 meters
17-Foot Remote Mount Cable – 5 meters
10-Foot Remote Mount Cable – 3 meters
Remote Mount Kits
HKN6161
HKN6160
20-Foot Dash Mount Data Cable Kit - IV&D
6-Foot Dash Mount Data Cable Kit - IV&D
Miscellaneous Cables
GKN6271
HKN6182
44
Ignition Sense Cable
Cable Keyloading Adapter - GCAI
ASTRO
HAD4006
®
XTL
TM
1500/XTL
HAE4003
2500/
XTL
5000
Antennas
HAD4006 HAD4007 HAD4008 HAD4009 HAD4017
RAD4010_RB
VHF
136-144 MHz 1/4 Wave Roof Mount Antenna
144-152 MHz 1/4 Wave Roof Mount Antenna
152-162 MHz 1/4 Wave Roof Mount Antenna
162-174 MHz 1/4 Wave Roof Mount Antenna
146-174 MHz 1/4 Wave Roof Mount Antenna
136-174 MHz 3.0dB Wave Roof Mount Antenna
HAE4003
HAE4004
HAE4011
HAE4012 HAE4013
RAE4014 RAE4014_RB
RAE4016_RB
HAE6010 HAE6011 HAE6012 HAE6013 UHF
450-470 MHz 1/4 Wave Roof Mount Antenna
470-512 MHz 1/4 Wave Roof Mount Antenna
450-470 MHz 3.5dB Gain Roof Mount Antenna
470-495 MHz 3.0dB Gain Roof Mount Antenna
494-512 MHZ 3.0dB Gain Roof Mount Antenna
450-470 MHz 5.0dB Gain Roof Mount Antenna
450-470 MHz 5.0dB Gain Roof Mount Antenna
494-512 MHz 5.0dB Gain Roof Mount Antenna
380-433 MHz 3.5dB Gain Roof Mount Antenna
380-433 MHz 5.0dB Gain Roof Mount Antenna
380-433 MHz 1/4 Wave Roof Mount Antenna
380-470 MHz Wideband 2.0dB Roof Mount Antenna
HAF4013 HAF4014 HAF4016 HAF4017 700/800 MHz
762-870 MHz 3.0dB Gain Low Profile Antenna
762-870 MHz 3.0dB Gain Elevated Feed Antenna
762-870 MHz 1/4 Wave Roof Mount Antenna
762-870 MHz 3.0dB Gain Collinear Roof Mount Antenna
45
motorola.com/radiosolutions
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. © Motorola, Inc. 2008.
LE-ACCY-DLR-EU-HITIER2-10/08
Download PDF