User manual | Fibre

Siemon Master Cat
2/25/11
12:16 PM
Page 60
FIBRE
Fibre
SECTION CONTENTS
Plug and Play Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1
MTP Adapter Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1
MTP to MTP Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2
MTP to LC Trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3
XGLO® Jumpers and Pigtails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.4 - 6.5
LightSystem® Jumpers and Pigtails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.6
ValuLight™ Jumpers and Pigtails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.7
XLR8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.8
XLR8 Pre-Polished Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.9
SC and ST Epoxy Polish Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.10
LC Epoxy Polish Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.11
LightSpeed ® ST, SC Fibre Termination Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.11
LC Fibre Termination Upgrade Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.11
LightSpeed Fibre Consumables Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.12
Replacement Tools for Fibre Termination Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.12
Fibre Trunking Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.13 –6.15
XGLO® & LightSystem®Indoor/Outdoor Tight Buffer Fibre Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . .6.16 – 6.17
XGLO® & LightSystem® Indoor/Outdoor Loose Tube Fibre Optic Cable . . . . . . . . . . . . . . . . . . . . . . . .6.18 – 6.19
6.0
www.siemon.com
Siemon Master Cat
2/25/11
12:16 PM
Page 61
FIBRE
Plug and Play Modules and Adapter Plates
SIEMON PLUG AND PLAY MODULES
Siemon LC to MTP® and SC to MTP Plug and Play modules provide a quick and efficient way to deploy up to 24
LC or 12 SC fibre ports in a single module. These factory terminated and tested ports are protected within the
housing for reliably high performance and simply connected via 12-strand MTP ports. Modules are available in
multimode (62.5/125, standard 50/125 and XGLO laser optimized 50/125 OM3/OM4) and singlemode cable.
1
4
Compact Housing
Reduces mounting depth for greater cable management space within
enclosures
1
2
2
Optimised Adapter Spacing
Enables easy finger access to fibre jumper connector latches in high
density patching environments
5
3
Durable and Lightweight
High-impact molded plastic body with single-finger access
3
4
Recessed Base
Allows cable to be fit under the modules for added cable
management space when installed in the horizontal orientation
(i.e. within FCP drawer)
6
5
Compatible with Existing Siemon Enclosures
Fits within RIC, FCP and SWIC Siemon fibre enclosures and VersaPOD
vertical patch panels
6
Multimode and Singlemode Modules
Utilize zirconia ceramic sleeves for optimum optical performance
PP2-24-LC(X)-01. . . . . . . . . . . . 24 Port LC P&P Module
with 2 MTP ports, black
PP2-12-(XX)(X)-01. . . . . . . . . . . 12 Port P&P Module with
1 MTP port, black
Interface
LC = LC
SC = SC
Fibre Type
Fibre Type
5 = 50/125 Multimode
6 = 62.5 Multimode
5L = XGLO 300 50/125 Multimode/OM3
5V = XGLO 550 50/125 Multimode/OM4
SM = Singlemode
5 = 50/125 Multimode
6 = 62.5 Multimode
5L = XGLO 300 50/125 Multimode/OM3
5V = XGLO 550 50/125 Multimode/OM4
SM = Singlemode
MTP® ADAPTER PLATES
Siemon MTP Adapter Plates offer a user friendly “pass-through” option for MTP connectors. Fitting within Siemon’s fibre enclosures and VersaPODTM
vertical patch panels, these plates secure MTP connectors, allowing efficient implmentation of MTP to MTP reels and extenders as well as MTP to LC
Trunks for direct equipment and patching connections
High Density
Supports up to 96 fibres per adapter plate - providing up to 1152 fibres in 4U
Flexible Configurations
1, 2, 4, 6 and 8 port versions available, supporting both singlemode and multimode
40 Gb/s and 100 Gb/s Ready
Enables simple upgrade path to future 40 Gb/s and 100 Gb/s applications over multimode
50/125 laser optimized fibre
Popular RIC Adapter Footprint
Fit within RIC, FCP and SWIC Siemon fibre enclosures and VersaPOD vertical patch panels
RIC-F-MP(XX)-01. . . . . . . . . . . . MTP Adapter Plate, black
Fibre Count
www.siemon.com
12 = 12 (1 MTP adapter)
24 = 24 (2 MTP adapters)
48 = 48 (4 MTP adapters)
72 = 72 (6 MTP adapters)
96 = 96 (8 MTP adapters)
6.1
Siemon Master Cat
2/25/11
12:17 PM
Page 62
FIBRE
Plug and Play Cable Assemblies
MTP® TO MTP REELS AND EXTENDERS
Combining Siemon’s reduced-diameter RazorCoreTM cable with 12-fibre MTP connectors, Plug and Play
Reels are designed to be quickly pulled and connected to Siemon Plug and Play Modules and MTP
Adapter Plates. Custom configurable to precise application requirements, these reels efficiently put
high-performance, high-density fibre connections exactly where you need them. Extenders offer Male
MTP Connectors on one end and female MTP adapter on the other to allow field extension of MTP Reels.
Custom Configurations
Available from 12 to 144 fibre counts in increments of 12
fibres
Multiple FibreTypes
Available in multimode (62.5/125, standard 50/125 and
laser optimised 50/125 OM3/OM4) and singlemode.
Reduced Pathway Fill
Siemon's RazorCore cable has significantly reduced cable
O.D. resulting in less cable tray fill and pathway restrictions
Protective Packaging
Dual shelf reel keeps unprotected connectivity away from
harm during payout
40 Gb/s and 100 Gb/s Ready
Enables simple upgrade path to future 40 Gb/s and 100 Gb/s
applications over multimode 50/125 laser optimised fibre
Ordering Information
F(X)(XXX)-(XX)L(XXX)M-(X). . . . . . . . . . MTP - MTP Trunk, LSOH
Polarity
C = Polarity method C per TIA-568-C.O for fibre reels (FR) only
Blank = fibreExtender (FE)
Confirmation
R = MTP-MTP Reel
E = Extender, Male
MTP to Female MTP
Length*
Length must be 3 digits
Example: 003 = 3 m
Fibre Count
12 = 12
24 = 24
36 = 36
48 = 48
72 = 72
96 = 96
144 = 144
6.2
Fibre Type
5 = 50/125 Multimode
6 = 62.5/125 Multimode
5L = XGLO 300 50/125 Multimode OM3
5V = XGLO 550 50/125 Multimode OM4
SM = Singlemode
*Ordering length is measured connector tip to connector tip. Multi-leg
versions offered with standard 1 metre legs. Minimum order length is
1 metre (xx) for 12 strand and 3 metres (xx) for 24 strands or greater
Ordering Length
1 metre
1 metre
www.siemon.com
Siemon Master Cat
2/25/11
12:17 PM
Page 63
FIBRE
Plug and Play MTP® to LC Trunks
Utilizing high quality Siemon RazorCore cable, MTP to LC Trunks offer a connectivity transition
from 12-fibre MTP connectors to duplex LC connectors. These may be implemented with Siemon’s MTP
Adapter Plates to provide flexible direct MTP to LC patching options over a wide a range of distances and
infrastructure configurations.
Custom Configurations
Available from 12 to 144 fibre counts in increments of 12 fibers
Multiple Fibre Types
Available in mulitmode (62.5/125, standard 50/125 and laser optimized
50/125 OM3/OM4) and singlemode.
Protective Packaging
Dual shelf reel keeps connectivity protected during payout
Ordering Information
TF(X)(X)(XX)L(XX)LC(XXX)(M). . . . . . . . . . MTP - LC LS0H Trunk (distribution to breakout)
Fibre Count
B = 12
C = 24
E = 36
F = 48
G = 72
H = 96
J = 144
Pulling Eye
Length*
*Minimum ordering length is 1 metre
A = Side A
B = Side B
C = None
Length must be 3 digits
Example: 003 = 3 m
Ordering length is measured connector tip to connector tip.
Jacketed duplex LC legs offered in standard
1 metre length for lengths greater than 1 metre
MTP Connector Gender
MM = Male
MF = Female
Fibre Type
5 = 50/125 Multimode
6 = 62.5/125 Multimode
5L = XGLO 300 50/125 Multimode OM3
5V = XGLO 550 50/125 Multimode OM4
SM = Singlemode
> 1 metre
1 metre
1 metre
www.siemon.com
50cm
6.3
Siemon Master Cat
2/25/11
12:17 PM
Page 64
FIBRE
®
XGLO Jumper & Pigtails
XGLO fibre optic cable assemblies are ideal for supporting 10 Gigabit
fibre applications over extended distances and next-generation
backbones. XGLO cable assemblies feature premium fibre that meets
IEEE 802.3 10 Gigabit Ethernet Standard as well as IEC-60793-2-10 and
TIA-492AAAC (OM3), TIA-492AAAD (OM4) specifications for laser
bandwidth Differential Mode Delay (DMD) specifications. In addition,
these assemblies offer a superior connector polish that meets stringent
Telcordia and ISO/IEC specifications for end-face geometry and exceeds
all ANSI/TIA and ISO/IEC insertion loss and return loss requirements.
Supports
10 Gigabit
Ethernet
These precision cable assemblies are warranted for 20 years and ensure
optimum applications support for 10 Gigabit Ethernet serial transmission
when installed in a qualified XGLO system. 100% inspection ensures
superior performance and quality.
Laser bandwidth optimised cable
reduces impurities in the core of fibre,
ensuring robust 10 Gigabit Ethernet
transmission
Singlemode assemblies feature blue
connectors with a yellow jacket;
multimode assemblies feature beige
connectors with an aqua jacket
Dust caps included to protect polish
from dirt and damage
50/125µm multimode and singlemode
assemblies available
SC duplexing clip allows for
polarity correction
Exceeds TIA/EIA and ISO/IEC
requirements for aging, exposure to
humidity, temperature extremes, impact,
vibration, coupling strength, and cable
resistance to stress and strain
XGLO fibre optic cable assemblies meet all Telcordia and ISO/IEC
specifications for ferrule end face geometry – including radius of
curvature, apex offset, and spherical undercut. Compliance ensures
minimum Return Loss, thereby reducing back reflection of laser
energy which could degrade transmission performance or damage
transceivers
6.4
www.siemon.com
Siemon Master Cat
2/25/11
12:17 PM
Page 65
FIBRE
Product Information
PERFORMANCE SPECIFICATIONS
50/125µm Multimode (OM3)
50/125µm Multimode (OM4)
Singlemode (OS2)
Wavelength (nm)
850
1300
850*
850
1300
850*
1310/1550nm
Min. Cable Bandwidth (MHz.km)
1500
(OFL)
500
(OFL)
2000
(EMB)
3500
(OFL)
500
(OFL)
4700
(EMB)
N/A
Max. Insertion Loss (dB)
0.25 (0.10 Typical)
Min. Return Loss (dB)
30 (35 Typical)
0.25 (0.10 Typical)
0.40 (0.10 Typical)
30 (35 Typical)
55 (60 Typical)
*Laser Bandwidth
Ordering Information
OFNR
LSOH (IEC 60332-3C)
XGLO 300 50/125µm Multimode OM3
Duplex Jumpers:
XGLO 300 50/125µm Multimode OM3
Duplex Jumpers:
FJ2-SCSC5L-(XX)AQ ...................SC to SC aqua duplex jumper
FJ2-LCLC5L-(XX)AQ....................LC to LC aqua duplex jumper
FJ2-LCSC5L-(XX)AQ....................LC to SC aqua duplex jumper
FJ2-SASA5L-(XX)AQ....................ST to ST aqua duplex jumper
FJ2-SASC5L-(XX)AQ....................ST to SC aqua duplex jumper
FJ2-LCSA5L-(XX)AQ....................LC to ST aqua duplex jumper
FJ2-SCSC5L-(XX)AH ...................SC to SC aqua duplex jumper
FJ2-LCLC5L-(XX)AH....................LC to LC aqua duplex jumper
FJ2-LCSC5L-(XX)AH....................LC to SC aqua duplex jumper
FJ2-SASA5L-(XX)AH....................ST to ST aqua duplex jumper
FJ2-SASC5L-(XX)AH....................ST to SC aqua duplex jumper
FJ2-LCSA5L-(XX)AH....................LC to ST aqua duplex jumper
Simplex Pigtails - 900 micron buffered
Simplex Pigtails - 900 micron buffered
FP1B-SC5L-(XX)AQ .....................SC simplex pigtail, aqua
FP1B-LC5L-(XX)AQ......................LC simplex pigtail, aqua
FP1B-SA5L-(XX)AQ......................ST simplex pigtail, aqua
FP1B-SC5L-(XX)AH .....................SC simplex pigtail, aqua
FP1B-LC5L-(XX)AH......................LC simplex pigtail, aqua
FP1B-SA5L-(XX)AH......................ST simplex pigtail, aqua
XGLO 550 50/125µm Multimode, OM4
Duplex Jumpers:
XGLO 550 50/125µm Multimode, OM4
Duplex Jumpers:
FJ2-SCSC5V-(XX)AQ ...................SC to SC aqua duplex jumper
FJ2-LCLC5V-(XX)AQ....................LC to LC aqua duplex jumper
FJ2-LCSC5V-(XX)AQ ...................LC to SC aqua duplex jumper
FJ2-SCSC5V-(XX)AH ...................SC to SC aqua duplex jumper
FJ2-LCLC5V-(XX)AH....................LC to LC aqua duplex jumper
FJ2-LCSC5V-(XX)AH ...................LC to SC aqua duplex jumper
Simplex Pigtails - 900 micron buffered
Simplex Pigtails: 900 micron buffered
FP1B-SC5V-(XX)AQ .....................SC simplex pigtail, aqua
FP1B-LC5V-(XX)AQ .....................LC simplex pigtail, aqua
FP1B-SC5V-(XX)AH .....................SC simplex pigtail, aqua
FP1B-LC5V-(XX)AH .....................LC simplex pigtail, aqua
XGLO Singlemode OS2 (UPC)
Duplex Jumpers:
XGLO Singlemode OS2 (UPC)
Duplex Jumpers:
FJ2-SCUSCUL-(XX) .....................SC to SC yellow duplex jumper
FJ2-LCULCUL-(XX)......................LC to LC yellow duplex jumper
FJ2-LCUSCUL-(XX) .....................LC to SC yellow duplex jumper
FJ2-SAUSAUL-(XX)......................ST to ST yellow duplex jumper
FJ2-LCUSAUL-(XX)......................LC to ST yellow duplex jumper
FJ2-SAUSCUL-(XX) .....................ST to SC yellow duplex jumper
FJ2-SCUSCUL-(XX)H...................SC to SC yellow duplex jumper
FJ2-LCULCUL-(XX)H ...................LC to LC yellow duplex jumper
FJ2-LCUSCUL-(XX)H...................LC to SC yellow duplex jumper
FJ2-SAUSAUL-(XX)H ...................ST to ST yellow duplex jumper
FJ2-LCUSAUL-(XX)H ...................LC to ST yellow duplex jumper
FJ2-SAUSCUL-(XX)H...................ST to SC yellow duplex jumper
Simplex Pigtails - 900 micron buffered
Simplex Pigtails - 900 micron buffered
FP1B-SCUL-(XX)..........................SC simplex pigtail, yellow
FP1B-LCUL-(XX)..........................LC simplex pigtail, yellow
FP1B-SAUL-(XX)..........................ST simplex pigtail, yellow
FP1B-SCUL-(XX)H .......................SC simplex pigtail, yellow
FP1B-LCUL-(XX)H .......................LC simplex pigtail, yellow
FP1B-SAUL-(XX)H .......................ST simplex pigtail, yellow
Use (XX) to specify length:
01=1m, 02 = 2m, 03 = 3m, 05 = 5m
Custom lengths and jacket colours are available upon request. Contact our Customer
Service Department for more information.
Because we continuously improve our products, Siemon reserves the right to change
specifications and availability without prior notice.
XGLO™ is a trademark of Siemon
www.siemon.com
6.5
Siemon Master Cat
2/25/11
12:17 PM
Page 66
FIBRE
®
LightSystem Jumper & Pigtails
Siemon offers a comprehensive line of multimode fibre jumpers and pigtails for connecting fibre links.
Assemblies are available in standard lengths of 1, 2, 3, and 5 metres, (custom lengths are also available).
Each and every terminated connector is optically tested so that you can be assured that 100% of the
Siemon-built cable assemblies meet stringent performance specifications.
PERFORMANCE SPECIFICATIONS
50/125µm Multimode - OM2 62.5/125µm Multimode - OM1
Wavelength (nm)
Min. Cable Bandwidth (MHz.km)
Max. Insertion Loss (dB)
Min. Return Loss (dB)
850
500
1300
850
500
200
0.50 (0.15 Typical)
25 (30 Typical)
1300
500
Ordering Information
OFNR
LSOH (IEC 60332-3C)
LightSystem Multimode Duplex Jumpers
LightSystem Multimode Duplex Jumpers
FJ2-SCSC(X)MM-(XX) .................SC-SC orange duplex jumper
FJ2-SASA(X)MM-(XX)..................ST-ST orange duplex jumper
FJ2-SASC(X)MM-(XX) .................ST-SC orange duplex jumper
FJ2-LCLC(X)MM-(XX)..................LC-LC orange duplex jumper
FJ2-LCSC(X)MM-(XX) .................LC-SC orange duplex jumper
FJ2-LCSA(X)MM-(XX)..................LC-ST orange duplex jumper
FJ2-SCSC(X)MM-(XX)H ...................SC to SC orange duplex jumper
FJ2-SASA(X)MM-(XX)H....................ST to ST orange duplex jumper
FJ2-SASC(X)MM-(XX)H ...................ST to SC orange duplex jumper
FJ2-LCLC(X)MM-(XX)H....................LC to LC orange duplex jumper
FJ2-LCSC(X)MM-(XX)H ...................LC to SC orange duplex jumper
FJ2-LCSA(X)MM-(XX)H....................LC to ST orange duplex jumper
LightSystem Multimode Simplex Pigtails:
900 micron buffered
LightSystem Multimode Simplex Pigtails:
900 micron buffered
FP1B-SC(X)MM-(XX) ...................SC simplex pigtail, orange
FP1B-SA(X)MM-(XX) ...................ST simplex pigtail, orange
FP1B-LC(X)MM-(XX) ...................LC simplex pigtail, orange
FP1B-SC(X)MM-01H ........................SC simplex pigtail, orange
FP1B-SA(X)MM-01H ........................ST simplex pigtail, orange
FP1B-LC(X)MM-01H ........................LC simplex pigtail, orange
Use (X) to specify multimode fibre type: “6” = 62.5/125µm (OM1); 5 = 50/125µm (OM2)
Use (XX) to specify length: 01 = 1m, 02 = 2m, 03 = 3m, 05 = 5m
Custom lengths and jacket colours are available upon request. Contact our Customer
Service Department for more information.
Because we continuously improve our products, Siemon reserves the right to change
specifications and availability without prior notice.
LightSystem™ is a trademark of Siemon
6.6
www.siemon.com
Siemon Master Cat
2/25/11
12:17 PM
Page 67
®
FIBRE
LightSystem Jumper & Pigtails
ValuLight jumpers and pigtails provide exceptional value at a very competitive price. ValuLight fibre cable
assemblies meet TIA-568-C.3 and ISO/IEC 11801 specifications for insertion loss and return loss. They are ideal
for commercial cabling data applications up to and including 1 Gigabit.
PERFORMANCE SPECIFICATIONS
50/125µm OM2 MULTIMODE
62.5/125µm OM1 MULTIMODE
OS2 SINGLEMODE
Wavelength (nm)
850
1300
850
1300
1310/1550
Min. Cable Bandwidth (MHz.km)
500
500
200
500
n/a
Max. Insertion Loss (dB)
0.75 (0.15 Typical)
Min. Return Loss (dB)
0.75 (0.25 Typical)
20 (25 Typical)
50 (55 Typical)
Ordering Information
MULTIMODE DUPLEX JUMPERS
Part #
Description
J2-SCSC(X)-(XX) . . . . . . . . . . . . SC to SC orange duplex jumper, OFNR
J2-SASA(X)-(XX) . . . . . . . . . . . . ST to ST orange duplex jumper, OFNR
J2-SASC(X)-(XX) . . . . . . . . . . . . ST to SC orange duplex jumper, OFNR
J2-LCLC(X)-(XX) . . . . . . . . . . . . LC to LC orange duplex jumper, OFNR
J2-LCSC(X)-(XX) . . . . . . . . . . . . LC to SC orange duplex jumper, OFNR
J2-LCSA(X)-(XX) . . . . . . . . . . . . LC to ST orange duplex jumper, OFNR
Use (X) to specify fibre type: 5 = 50/125µm OM2, 6 = 62.5/125µm OM1
Use (XX) to specify length:
01 = 1m, 02 = 2m, 03 = 3m, 05 = 5m
MULTIMODE PIGTAILS
Part #
Description
P1B-SC(X)-01 . . . . . . . . . . . . . . . SC orange simplex pigtail,
900 micron, buffered, 1m
P1B-SA(X)-01 . . . . . . . . . . . . . . . ST orange simplex pigtail,
900 micron, buffered, 1m
P1B-LC(X)-01 . . . . . . . . . . . . . . . LC orange simplex pigtail,
900 micron, buffered, 1m
Use (X) to specify fibre type: 5 = 50/125µm OM2, 6 = 62.5/125µm OM1
SINGLEMODE OS2 DUPLEX JUMPERS
Part #
Description
J2-SCSCP-(XX) . . . . . . . . . . . . . SC to SC yellow duplex jumper, OFNR
J2-SASAP-(XX) . . . . . . . . . . . . . ST to ST yellow duplex jumper, OFNR
J2-SASCP-(XX) . . . . . . . . . . . . . ST to SC yellow duplex jumper, OFNR
J2-LCLCP-(XX). . . . . . . . . . . . . . LC to LC yellow duplex jumper, OFNR
J2-LCSCP-(XX) . . . . . . . . . . . . . LC to SC yellow duplex jumper, OFNR
J2-LCSAP-(XX). . . . . . . . . . . . . . LC to ST yellow duplex jumper, OFNR
Use (XX) to specify length:
01 = 1m, 02 = 2m, 03 = 3m, 05 = 5m
SINGLEMODE OS2 PIGTAILS
Part #
Description
P1B-SCP-01 . . . . . . . . . . . . . . . . SC yellow simplex pigtail,
900 micron, buffered, 1m
P1B-SAP-01 . . . . . . . . . . . . . . . . ST yellow simplex pigtail,
900 micron, buffered, 1m
P1B-LCP-01 . . . . . . . . . . . . . . . . LC yellow simplex pigtail,
900 micron, buffered, 1m
www.siemon.com
Custom lengths and jacket colours are available upon request. Contact our Customer
Service Department for more information.
Because we continuously improve our products, Siemon reserves the right to change
specifications and availability without prior notice.
ValueLight™ is a trademark of Siemon
6.7
Siemon Master Cat
2/25/11
12:17 PM
Page 68
FIBRE
XLR8™ Fibre Termination Kit
Siemon’s XLR8 mechanical splice termination kit incorporates an exclusive dual-process activation tool
which dramatically reduces termination time per connector. This process is intended for use with 900µm
tight buffered fibre cables.
3
6
1
2
4
8
5
7
1
Single Step Termination – XLR8 tool combines both splice
activation and mechanical crimp into a single, optimised step
5
Universal LC/SC Compatibility – Tool terminates both LC and SC
connectors with no time-consuming changeover required
2
Robust Process – Single-step termination eliminates the need to
handle the connector between splice and crimp processes, maintaining
integrity of the splice
6
Fibre Alignment Aid – Smooth alignment channel simplifies fibre
insertion and avoids damage to fibre end face
7
Validated – XLR8 tool has been validated for over 500,000 cycles
3
Flexible Ergonomics –Tool optimised for use in handheld or tabletop orientation
8
4
Reduced Risk of Polish Contamination – All termination steps
completed with connector dust cap in place
Precision Cleaver – Kit features a user-friendly fibre cleaver designed
to provide clean, precise and high performance cleaves on an array of
fibre types
Ordering Information
Part #
Description
FTERM-XLR8 . . . . . . . . . . . . . . . XLR8 fibre termination kit
Kit Includes:
• Activation tool
• Jacket stripper
• Buffer stripper
• Scissors
• Precision cleaver
• Strip template
• Marker
• Alcohol pads
• Electrical tape
• Convenient carrying case
Replacement Parts
Part #
Description
FTERM-XLR8-A . . . . . . . . . . . . . Fibre activation tool, replacement
FTERM-XLR8-C2 . . . . . . . . . . . . Precision fibre cleaver, replacement
Visit www.siemon.com for installation instructions and demonstration
6.8
www.siemon.com
Siemon Master Cat
2/25/11
12:18 PM
Page 69
FIBRE
XLR8™ Pre-Polished Connectors
Combined with the patent-pending XLR8 activation tool, Siemon’s new pre-polished XLR8 mechanical
splice connectors can be deployed with unsurpassed termination speed and quality. Available in both LC
and SC configurations, these connectors support both the multimode and singlemode versions of
Siemon’s 10 Gb/s XGLO® and Gigabit LightSystem® solutions.
Optical Performance
Insertion Loss
• SM: 0.20dB Typ
• MM: 0.20dB Typ
Return Loss
• SM: -55dB Typ
• MM: -37dB Typ
Fewer Termination Steps – XLR8 SC connectors ship factoryassembled, eliminating time-consuming field assembly of inner and outer
connector bodies
Robust Polish Protection – Entire connector termination process is
completed with dust-cap in place, protecting the critical end face polish from
contamination
Enhanced Splice Integrity – XLR8 connector termination process
combines splicing and crimping in a single step, eliminating connector
handling that can impact splice integrity
High Quality Performance – Exceeds TIA standards for optical
peformance and fibre retention strength
Ordering Information
Part #
Description
LC Multimode
FC1M-LC-5L-B12 . . . . . . . . . . . . LC Simplex connector, 50/125µm laser optimised, 900µm buffered fibre*, aqua boot (XGLO)
FC1M-LC-6MM-B80 . . . . . . . . . . LC Simplex connector, 62.5/125µm multimode, 900µm buffered fibre*, beige boot (LightSystem)
FC1M-LC-5MM-B01 . . . . . . . . . . LC Simplex connector, 50/125µm multimode, 900µm buffered fibre*, black boot (LightSystem)
LC Singlemode
FC1M-LC-SM-B06 . . . . . . . . . . . LC Simplex connector, singlemode, 900µm buffered fibre*, blue boot (XGLO and LightSystem)
SC Multimode
FC1M-SC-5L-B12. . . . . . . . . . . . SC Simplex connector, 50/125µm laser optimized, 900µm buffered fibre*, aqua boot (XGLO)
FC1M-SC-6MM-B80. . . . . . . . . . SC Simplex connector, 62.5/125µm multimode, 900µm buffered fibre*, beige boot (LightSystem)
FC1M-SC-5MM-B01. . . . . . . . . . SC Simplex connector, 50/125µm multimode, 900µm buffered fibre*, black boot (LightSystem)
SC Singlemode
FC1M-SC-SM-B06 . . . . . . . . . . . SC Simplex connector, singlemode, 900µm buffered fibre*, blue boot (XGLO and LightSystem)
* For use with 900µm tight buffer terminations only - Fan-out kits to transition from 250µm to 900µm cannot
be used with XLR8 connectivity.
www.siemon.com
6.9
Siemon Master Cat
2/25/11
12:18 PM
Page 70
FIBRE
SC and ST Epoxy Polish Connectors
SC EPOXY POLISH CONNECTORS
MULTIMODE (XGLO® and LightSystem®)
Part #
Description
FC1-SC-MM-J80. . . . . . . . . . . . . SC simplex connector, jacketed fibre, beige boot
FC1-SC-MM-B80 . . . . . . . . . . . . SC simplex connector, buffered fibre, beige boot
FC2-SC-MM-B80 . . . . . . . . . . . . SC duplex connector, buffered fibre, two beige boots
FC2-SC-MM-J. . . . . . . . . . . . . . . SC duplex connector, jacketed fibre, one black boot and
one beige boot
Simplex
Add “-B” to the end of part number for bulk pack (Simplex: 100/box, Duplex: 50/box).
SINGLEMODE (XGLO)
Part #
Description
FC1-SC-SM-B06. . . . . . . . . . . . . SC simplex connector, buffered fibre, blue boot
FC1-SC-SM-J06 . . . . . . . . . . . . . SC simplex connector, jacketed fibre, blue boot
FC2-SC-SM-B06. . . . . . . . . . . . . SC duplex connector, buffered fibre, two blue boots
FC2-SC-SM-J06 . . . . . . . . . . . . . SC duplex connector, jacketed fibre, blue boot
Duplex
Add “-B” to the end of part number for bulk pack (Simplex: 100/box, Duplex: 50/box).
ST EPOXY POLISH CONNECTORS
The ST connector employs a rugged metal bayonet coupling ring with radial ramps which facilitate
engagement to the studs of the mating adapter. Two ST connectors are available for jacketed fibre, one with a
beige boot and one with a black boot. The two colours enable easy identification of the fibres when terminating
individual connectors to form a duplex jumper.
MULTIMODE (XGLO and LightSystem)
Part #
Description
FC1-SA-MM-J80. . . . . . . . . . . . . ST simplex connector, jacketed fibre, beige boot
FC1-SA-MM-B80 . . . . . . . . . . . . ST simplex connector, buffered fibre, beige boot
Buffered
Add “-B” to the end of part number for bulk pack (100/box).
SINGLEMODE (XGLO)
Part #
Description
FC1-SA-SM-J06 . . . . . . . . . . . . . ST simplex connector, jacketed fibre, blue boot
FC1-SA-SM-B06. . . . . . . . . . . . . ST simplex connector, buffered fibre, blue boot
Jacketed
Add “-B” to the end of part number for bulk pack (100/box).
6.10
www.siemon.com
Siemon Master Cat
2/25/11
12:18 PM
Page 71
FIBRE
LC EPOXY POLISH CONNECTORS
(XGLO® & LIGHTSYSTEM®)
Siemon LC products offer all the benefits of SC and ST connections
in a Small Form Factor (SFF), high-density design. LC adapter
products are compatible with our popular MAX®, CT, FOB, and
MX-SM work area and telecommunications room products, providing
a wide variety of installation options. LC connectors take just two
minutes to terminate, using the Siemon LightSpeed® Termination Kit.
MULTIMODE
Part #
Description
FC1-LC-MM-B80 . . . . . . . . . . . . LC simplex connector, beige, multimode, buffered fibre, beige boot
FC2-LC-MM-J80. . . . . . . . . . . . . LC duplex connector, beige, multimode, jacketed fibre, beige boots
SINGLEMODE
Part #
Description
FC1-LC-SM-B02. . . . . . . . . . . . . LC simplex connector, blue, singlemode, buffered fibre, white boot
FC1-LC-SM-J02 . . . . . . . . . . . . . LC simplex connector, blue, singlemode, jacketed fiber, white boot
LIGHTSPEED® ST, SC FIBRE TERMINATION KIT
Achieve faster fibre terminations and higher performance with
Siemon’s LightSpeed Termination Kit. The Siemon fibre termination
kit contains all the tools required for termination of multimode or
singlemode ST or SC connectors — packaged in a rugged canvas
carrying case. Use the optional LC Upgrade Kit (see below) for LC
connector terminations. All consumables must be ordered
separately as noted below.*
Part #
Description
FTERM-L2 . . . . . . . . . . . . . . . . . LightSpeed Fibre Termination Kit for ST and SC multimode
connectors*
Note: Select tools and other termination products supplied with the kit can be ordered separately.
*All consumables including primer, adhesive and polishing films are contained in the consumables kit
and must be ordered separately.
LC FIBRE TERMINATION LIGHTSPEED® UPGRADE KIT
The Siemon LC upgrade kit is used in conjunction with the
LightSpeed Termination Kit (FTERM-L2) and has all the accessories
to terminate LC connectors using Siemon’s exclusive LightSpeed
adhesive. The kit includes an LC microscope head (that attaches to
the microscope included with the FTERM-L2), an LC polishing puck
and a micro-torch* (to shrink the colour-coded LC crimp sleeve
tubing).
Part #
Description
FTERM-LC . . . . . . . . . . . . . . . . . LC Fibre Termination Upgrade Kit
(used in conjunction with FTERM-L2)
Note: Contents of FTERM-LC are also available individually.
Contact our Customer Service Department for more information.
*Butane fuel not included.
www.siemon.com
6.11
Siemon Master Cat
2/25/11
12:18 PM
Page 72
FIBRE
LIGHTSPEED® FIBRE CONSUMABLES KIT
Siemon’s LightSpeed fibre terminations consumables kit features a premium abrasive film to polish ceramic
ferrules and glass at the same level, at a consistent rate. The films have been qualified to assure exceptional
insertion and return loss results when used in accordance with our instructions.
Part #
Description
FT-CKIT-L2*. . . . . . . . . . . . . . . . . Consumables kit for use with fibre termination
kit (FTERM-L2). Includes enough consumables
to perform a minimum of 200 multimode or
singlemode terminations
Individual components may be ordered separately as
replacements. Part numbers listed below.
FT-PRBOT-L . . . . . . . . . . . . . . . . Primer bottle (3.5mL)
FT-ADH-L*. . . . . . . . . . . . . . . . . . Adhesive Syringe (5cc)
FT-ALPAD . . . . . . . . . . . . . . . . . . Alcohol pads
FT-WIPES . . . . . . . . . . . . . . . . . . Dry lint-free wipes
FT-SYRMTIP. . . . . . . . . . . . . . . . Syringe tip needles w/covers
FT-PF12 . . . . . . . . . . . . . . . . . . . 12µm air polish film, grey
FT-PF3 . . . . . . . . . . . . . . . . . . . . 3µm polish film, pink
FT-PF1 . . . . . . . . . . . . . . . . . . . . 1µm polish film, purple
FT-FF. . . . . . . . . . . . . . . . . . . . . . Finishing film, white
FT-PF6** . . . . . . . . . . . . . . . . . . . 6µm recovery film, bronze
*This product contains material with a time and temperature sensitive shelf life.
Store between 40 – 100 degrees F (4.4 – 38.5°C)
and verify expiration date marked on product prior to use
**This recovery film is optional and not included with the consumables kit.
REPLACEMENT TOOLS FOR FIBRE TERMINATION KITS
Siemon offers a full line of replacement tools in the event that a tool is lost or has used
up its life expectancy. The tools available are the exact tools provided in our fibre
termination kits.
Part #
Description
FT-MS400 . . . . . . . . . . . . . . . . . . 400X power microscope
FT-SCRIBE . . . . . . . . . . . . . . . . . Double bladed fibre cleaver
CI-SCISSORS . . . . . . . . . . . . . . Electrician scissors
FT-CRIMP . . . . . . . . . . . . . . . . . . Crimp tool w/3-position die for ST/SC/LC
FT-PAD . . . . . . . . . . . . . . . . . . . . 152.4mm (6 in.) x 152.4mm (6 in.) polishing pad
FT-PUCK. . . . . . . . . . . . . . . . . . . SC/ST compatible polishing puck
FT-TMPL . . . . . . . . . . . . . . . . . . . Template for SC/ST and LC connectors
FT-JSTRP . . . . . . . . . . . . . . . . . . Jacket stripper
FT-BSTRP. . . . . . . . . . . . . . . . . . Buffer stripper
FT-LCPUCK . . . . . . . . . . . . . . . . Duplex LC Polishing Puck
FT-MSLC2HEAD. . . . . . . . . . . . . Duplex LC Scope Adapter
6.12
www.siemon.com
Siemon Master Cat
2/25/11
12:18 PM
Page 73
Siemon’s fibre trunking cable assemblies provide an efficient and
cost effective alternative to individual field-terminated components.
Combining factory terminated connectors with Siemon cable in a
high-performance cable assembly, Siemon fibre trunking cable
assemblies were designed with Local Area Networks (LAN), Data
Centers and Storage Area Networks (SAN) applications in mind.
These assemblies allow up to 75% faster field installation times.
Standard configurations also help maintain consistent cable layout
and facilitate efficient moves, adds and changes. These precision
cable assemblies are warranted for 20 years, 100% inspection
ensures superior performance and quality. SC, LC and SC-LC
hybrids available.
FIBRE
XGLO™ & LightSystem®
Fibre Trunking Cable Assemblies
Pulling Eye
An optional encapsulated protection sleeve
with cable pulling eye protects the fibre
during installation.
4
Enclosure Compatibility
Siemon fibre trunking assemblies are
compatible with all Siemon fibre enclosures.
5
2
6
Protective Packaging
Each assembly is individually packaged to
protect factory terminations.
1
See ordering information next page
3
4
Proper Orientation – Each leg is designated for proper connector
orientation
Custom Assembly – Fibre assemblies can be created based on a
flexible part number scheme for performance options to best suit
each installation
5
Identification — Each cable assembly is coded with a unique
identification number for administrative purposes
Factory Terminated and Tested – Every fibre cable assembly is
factory terminated and tested for premium performance
6
Superior Design – Each cable assembly utilises an epoxy breakout
with spiral wrap to protect the fibres when entering an enclosure
1
Siemon Cable – Utilises high quality Siemon cable in both armored
and non-armored choice of construction
2
3
www.siemon.com
6.13
Siemon Master Cat
2/25/11
12:18 PM
Page 74
FIBRE
Fibre Trunking Cable Assemblies
T F - ( X ) ( X ) ( X ) ( X ) ( X X ) ( X X ) ( X X X ) ( X )
Fibre Count:
A= 6
B = 12
C = 24
E = 36
F = 48
G = 72*
Pulling Eye:
A = Side A
B = Side B
C = None
Connector* (Side B):
LC = LC
SC = SC
SA = ST
(blank) = Pigtail
* Non-armored only
Fibre Type:
A = Singlemode (XGLO®)—Yellow (OS1)
B = 62.5/125 (LightSystem®)—Orange (OM1)
C = 50/125 (LightSystem)—Orange (OM2)
L = 50/125 Laser Optimized (XGLO)—Aqua (OM3)
V = 50/125 Laser Optimized (XGLO)—Aqua (OM4)
Connector (Side A):
LC = LC
SC = SC
SA = ST
Unit of
Measure:
M = Meters
**Cable Length
Length must be 3 digits
Example: 004 = 4 m
Cable Type:
L = LS0H—Indoor Distribution (IEC 60332-3C)
(Side A)
Ordering Length
1 metre
(Side B)
1 metre
**Ordering length is measured connector tip to connector tip.
900 micron, buffered, 1m breakout. Minimum order length is 4 metres.
Note: These products are made to order. Call for lead time and availability.
6.14
www.siemon.com
Siemon Master Cat
3/14/11
3:38 PM
Page 75
FIBRE
Fibre Trunking Cable Assemblies
CABLE — Optical and Physical Specifications
Multimode
LightSystem
62.5/125µm (OM1)
(850/1300 nm)
LightSystem®
50/125µm (OM2)
(850/1300 nm)
**XGLO®
50/125µm (OM3)
(850/1300 nm)
**XGLO®
50/125µm (OM4)
(850/1300 nm)
XGLO Singlemode
(OS1)
(1310/1550 nm)
Fibre Cable Attenuation,
Max (dB/km)
3.5/1.0
3.5/1.0
3.5/1.0
3.0/1.0
0.5/0.5*
OFL Bandwidth, min (MHz•km)
200/500
500/500
1500/500
3500/500
N/A
N/A
N/A
2000/NS
4700/NS
N/A
Orange
Orange
Aqua
Aqua
Yellow
®
Cable Type
Effective Modal Bandwidth,
min (MHz•km)
Cable Outer Jacket Colour
Break-Out Colours: Single
Fibre Strands**
Sub-Unit Colours and/or
Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua
Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua
Markings**
*XGLO singlemode fibre meets Low Water Peak specifications per ITU-T G.652.C/D
** XGLO multimode cable premium fibre that meets IEEE 802.3 10 Gigabit Ethernet Standard as well as IEC-60793-2-10 and TIA-492AAAC (OM3)
TIA-492AAAD (OM4) specifications for laser bandwidth Different Mode Delay (DMD) specifications.
CONNECTORS — Optical Specifications
Performance
Class
Fibre Type
Min Return
Loss (dB)
Max Insertion
Loss (dB)
62.5/125µm Multimode (OM1)
LightSystem
0.65 (0.15 Typical)
25 (30 Typical)
50/125µm Multimode (OM2)
LightSystem
0.65 (0.15 Typical)
25 (30 Typical)
50/125µm Laser Optimized (OM3, OM4)
XGLO
0.25 (0.10 Typical)
30 (35 Typical)
Singlemode (OS1)
XGLO
0.40 (0.25 Typical)
55 (57 Typical)
CONNECTORS — Physical Specifications
Connector Type
IEC Intermateabilty TIA Intermateabilty
Compliance
Compliance
Housing Color
SM
MM
Boot Color
SM
MM
SC
IEC 60874-14
TIA/EIA-604-3
Blue
Beige
Blue
ST
IEC 60874-10
TIA/EIA-604-2
N/A
N/A
Blue
Beige
Beige
LC
IEC 61754-20
TIA/EIA-604-10
Blue
Beige
White
White
CABLE DIAMETERS BY FIBRE COUNT (ALL VALUES ARE NOMINAL)
Cable Type
Fibre Strand
Count
Sleeve
Diameter
mm (in.)
Cable
Diameter
mm (in.)
Minimum Bend
Radius
mm (in.)
Required Duct
Diameter
mm (in.)
Maximum Pull
Force
kg (Pounds)
6
12
24
36
48
72
12
24
44.5 (1.75)
44.5 (1.75)
44.5 (1.75)
63.5 (2.5)
63.5 (2.5)
63.5 (2.5)
44.5 (1.75)
44.5 (1.75)
5.8 (0.23)
5.8 (0.23)
8.8 (0.40)
16.5 (0.65)
16.0 (0.63)
19.5 (0.77)
13.0 (0.51)
14.8 (0.584)
15x cable diameter
15x cable diameter
15x cable diameter
20x cable diameter
20x cable diameter
20x cable diameter
15x cable diameter
15x cable diameter
70 (2.75)
70 (2.75)
70 (2.75)
90 (3.5)
90 (3.5)
90 (3.5)
90 (3.5)
90 (3.5)
45.4 (100)
45.4 (100)
45.4 (100)
45.4 (100)
45.4 (100)
45.4 (100)
45.4 (100)
45.4 (100)
Non-Armored
Armored
Custom lengths and jacket colours are available upon request. Contact our Customer Service Department for more information.
Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.
LightSystem® & XGLO® are trademarks of Siemon
www.siemon.com
6.15
Siemon Master Cat
2/25/11
12:18 PM
Page 76
FIBRE
XGLO™ & LightSystem® Indoor / Outdoor
Tight Buffer (International)
Siemon LSOH indoor/outdoor tight buffer cables are ideal for data centers, campus and building backbones.
Siemon fibre optic cables are offered in XGLO and LightSystem configurations supporting high-speed
applications such as Gigabit Ethernet, 10 Gigabit Ethernet, Gigabit ATM and fibre Channel.
Ordering Information
XGLO Multimode 50/125 OM3, OM4, Singlemode OS2, LightSystem Multimode 62.5/125 OM1, 50/125 OM2
Fibre Count
Construction
9GD(X)H004C-(XXXX)M
4
1 tube of 4 fibres
9GD(X)H016K-(XXXX)M
16
1 tube of 16 fibres
9GD(X)H006D-(XXXX)M
6
1 tube of 6 fibres
9GD(X)H024L-(XXXX)M
24
1 tube of 24 fibres
9GD(X)H008E-(XXXX)M
8
1 tube of 8 fibres
9GD(X)H048G-(XXXX)M
48
4 tubes of 12 fibres
9GD(X)H012G-(XXXX)M
12
1 tube of 12 fibres
9GD(X)H072G-(XXXX)M
72
6 tubes of 12 fibres
Part #
Fibre Count
Part #
Construction
Use 1st (X) to specify fibre type: 5 = 50/125µm, 6 = 62.5/125µm, 5 = 50/125µm Laser Optimized, 8 = Singlemode
Use (XXXX) to specify class performance: G101 = OM1 62.5µm, T101 = OM2 50µm, T301 = OM3 50µm Laser Optimised, T501 = OM4 50µm Laser Optimised, E201 = OS2 Singlemode
Note: Contact Siemon Customer Service for cables available in fixed reel lengths.
M= meters, 1=1000 meter, 5= 500 meter
Jacket (Black)
Jacket (Black)
• Material LS0H— LS0H Compound
• Material:
LS0H— LS0H Compound
Aramid Yarns
• Water blocking swellable yarn
Water Blocking Swellable Tape
Identification
Central Strength Member
• Colour-coded fibres
• Light-weight solid dielectric
Aramid Yarns
Rip Cord
• Water blocking swellable yarn
• Applied longitudinally under cable jacket
Identification
4-24 Strands
48-72 Strands
XGLO Singlemode, OS2
XGLO (550) Multimode, 50/125, OM4
XGLO Multimode (300) 50/125, OM3
LIGHTSYSTEM Multimode
50/125,OM2; 62.5 OM1
STANDARDS COMPLIANCE
STANDARDS COMPLIANCE
STANDARDS COMPLIANCE
STANDARDS COMPLIANCE
• ISO/IEC 11801:Ed 2.0 Amendment:1:2008
• ISO/IEC 11801:2002 OM3
• ISO/IEC 11801:2002 OM3
• ISO/IEC 11801:2002 OM1 (62.5/125)
• ANSI/TIA/EIA-568-B.3
• ISO/IEC 11801:2002 Ammendment 2 OM4
• ANSI/TIA/EIA-568-B.3
• ISO/IEC 11801:2002 OM2 (50/125)
• Telcordia GR-409-CORE
• ANSI/TIA/EIA-568-C.3
• ANSI/TIA/EIA-568-B.3-1
• ANSI/TIA/EIA-568-B.3
• ITU-T G.652.D
• ANSI/TIA-492 AAAD
• ANSI/TIA-492 AAAC
• ANSI/TIA-598-C
• IEC 60332-3
IEC 60332-1-2 (Single strand),
IEC 60754-2 (Acid gas),
IEC 61034-2 (Smoke density)
• IEC 60793-2-10 fibreType A1a.3
• Telcordia GR-409-CORE
• ANSI/TIA-492 AAAB
• Telcordia GR-409-CORE
• IEC 60332-3
IEC 60332-1-2 (Single strand),
IEC 60754-2 (Acid gas),
IEC 61034-2 (Smoke density)
• Telcordia GR-409-CORE
APPLICATIONS SUPPORT
APPLICATIONS SUPPORT
• IEC 60332-3
IEC 60332-1-2 (Single strand),
IEC 60754-2 (Acid gas),
IEC 61034-2 (Smoke density)
APPLICATIONS SUPPORT
APPLICATIONS SUPPORT
6.16
• Colour-coded fibres and tubes
• IEC 60332-3
IEC 60332-1-2 (Single strand),
IEC 60754-2 (Acid gas),
IEC 61034-2 (Smoke density)
APPLICATION
DISTANCE (m)
APPLICATION
DISTANCE (m)
APPLICATION
DISTANCE (m)
APPLICATION
10GBASE-L (1310 nm)
8,000
10GBASE-SX (850 nm)
550
10GBASE-SX (850 nm)
300
10GBASE-SX (850 nm)
DISTANCE (m)
10GBASE-E (1550 nm)
30,000
10GBASE-LX4 (1300 nm)
300
10GBASE-LX4 (1300 nm)
300
50/125µm
82
10G Fibre Channel (Serial-1310 nm)
10,000
1000BASE-SX (850 nm)
1000
1000BASE-SX (850 nm)
900
62.5/125µm
26
10G Fibre Channel (WDM-1310 nm)
10,000
1000BASE-LX (1300 nm)
600
1000BASE-LX (1300 nm)
600
1000BASE-SX (850 nm)
1000BASE-LX (1300 nm)
5,000
Fibre Channel 266 (1300 nm)
1,500
Fibre Channel 266 (1300 nm)
1,500
50/125µm
Fibre Channel 266/1062 (1300 nm)
10,000
ATM 622 (1300 nm)
500
ATM 622 (1300 nm)
500
62.5/125µm
275
ATM 52/I55/622 (1300 nm)
15,000
ATM 155 (1300 nm)
2,000
ATM 155 (1300 nm)
2,000
1000BASE-LX (1300 nm)
550
ATM 52 (1300 nm)
3,000
ATM 52 (1300 nm)
3,000
Fibre Channel 266 (1300 nm)
1,500
FDD1 (Original-1300 nm)
2,000
FDD1 (Original-1300 nm)
2,000
ATM 622 (1300 nm)
500
100BASE-FX (1300 nm)
2,000
100BASE-FX (1300 nm)
2,000
ATM 155 (1300 nm)
2,000
ATM 52 (1300 nm)
3,000
550
FDDI (Original-1300 nm)
2,000
100BASE-FX (1300 nm)
2,000
www.siemon.com
Siemon Master Cat
2/25/11
12:18 PM
Page 77
FIBRE
XGLO™ 10 Gigabit Ethernet Fibre Optic
Cable
Minimum Performance Parameters for XGLO 50/125µm Multimode Fibre
Guaranteed Gigabit
Transmission
Distance (m)
Fibre
Type
Guaranteed 10 Gigabit
Transmission
Distance (m)
Minimum Bandwidth
(MHz • km)
Maximum Attenuation
(dB/km)
Group Index
of Refraction
850 nm
1300 nm
850 nm†
1300 nm††
850 nm
1300 nm
850 nm
1300 nm
850 nm
1300 nm
900
600
300
300
RML - 2000
OFL - 1500
OFL - 500
3.5
1.0
1.483
1.479
1040
600
550
300
RML - 4700
OFL - 3500
OFL - 500
3.0
1.0
1.483
1.479
50/125
(OM3)
50/125
(OM4)
† 10GBASE-S †† 10GBASE-LX4
Minimum Performance Parameters for XGLO Singlemode fibre
Fibre
Type
Singlemode
(OS2)
Wavelength
(nm)
Maximum
Attenuation
(dB/km)
Zero Dispersion
Wavelength (nm)
1310
1550
1310-1625
0.40
0.30
<0.40
1312 ± 10
1312 ± 10
1312 ± 10
Zero Dispersion
Slope (nm2-km)
Index of
Refraction
≤0.089
≤0.089
≤0.089
1.468
1.468
1.468
LightSystem® Gigabit Ethernet Fibre Optic Cable
Minimum Performance Parameters for LightSystem 50/125µm & 62.5/125µm Multimode Fibre
Fibre
Type
50/125µm
(OM2)
62.5/125µm
(OM1)
Wavelength
nm
Maximum
Attenuation
(dB/km)
Minimum Modal
Bandwidth
(MHz.km)
Index of Refraction
Guaranteed Gigabit
Transmission Distance
(Meters)
850
3.5
500
550
1.483
1300
850
1300
1.0
3.5
1.0
500
200
500
550
275
550
1.479
1.495
1.490
*The protocol pertinent to the transmission distance as noted is Gigabit Ethernet per IEEE 802.3:2005.
XGLO and LightSystem Physical Specifications
PHYSICAL SPECIFICATIONS
Fibre
Count
Nominal
Cable Diameter
4
6
8
12
16
24
48
72
Maximum Pulling Tension
(Newtons)
Nominal
Net Weight
(mm)
Installation
Long Term
(kg/km)
5.3
5.3
5.8
6.2
7.8
8.8
18.3
21.9
1500
1500
1500
1500
1500
1500
4200
5400
495
495
495
495
495
495
1400
1800
23
25
30
35
49
61
255
384
Fibre
Count
Minimum Crush
Resistance
(N/10cm)
Operating
Temperature
(°C)
Storage
Temperature
(°C)
Minimum Bend Radius
Installation
Long Term
4-12
500
-40/70
-40/70
20 x DIA.
10 x DIA.
16-72
1000
-20/70
-20/70
20 x DIA.
10 x DIA.
Custom lengths and jacket colours are available upon request. Contact our Customer Service Department for more information.
Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.
LightSystem® & XGLO® are trademarks of Siemon
www.siemon.com
6.17
Siemon Master Cat
2/25/11
12:18 PM
Page 78
FIBRE
XGLO™ & LightSystem® Indoor / Outdoor
Loose Tube (International)
Siemon LSOH indoor/outdoor loose tube cables are ideal for campus and building backbones. Siemon
fibre optic cables are offered in XGLO and LightSystem configurations supporting high-speed,
applications such as Gigabit Ethernet, 10 Gigabit Ethernet, Gigabit ATM and Fibre Channel.
Ordering Information
XGLO Multimode 50/125 OM3, OM4, Singlemode OS2, LightSystem: Multimode 62.5/125 OM1, 50/125 OM2
Part #
Fibre Count
9GG(X)H002B-(XXXX)M
9GG(X)H004C-(XXXX)M
9GG(X)H006D-(XXXX)M
9GG(X)H008E-(XXXX)M
9GG(X)H012G-(XXXX)M
9GG(X)H016D-(XXXX)M
2
4
6
8
12
16
Construction
Part #
1 tube of 2 fibres
1 tube of 4 fibres
1 tube of 6 fibres
1 tube of 8 fibres
1 tube of 12 fibres
2 tubes of 6 fibres
1 tube of 4 fibres
9GG(X)H024D-(XXXX)M
9GG(X)H036G-(XXXX)M
9GG(X)H048G-(XXXX)M
9GG(X)H072G-(XXXX)M
9GG(X)H096G-(XXXX)M
9GG(X)H144G-(XXXX)M
Fibre Count
Construction
24
36
48
72
96
144
4 tubes of 6 fibres
6 tubes of 6 fibres
4 tubes of 12 fibres
6 tubes of 12 fibres
8 tubes of 12 fibres
12 tubes of 12 fibres
Use 1st (X) to specify fibre type: 5 = 50/125µm, 6 = 62.5/125µm, 5 = 50/125µm Laser Optimized, 8 = Singlemode
Use (XXXX) to specify class performance: G101 = OM1 62.5µm, T101 = OM2 50µm, T301 = OM3 50µm Laser Optimised, T501 = OM4 50µm Laser Optimised, E201 = OS2 Singlemode
Note: Contact Siemon Customer Service for cables available in fixed reel lengths.
M= meters, 1=1000 meter, 5= 500 meter
Jacket (Black)
Material:LS0H— LS0H Compound
Water Blocking Aramid Yarn
Rip Cord:
Applied longitudinally under cable jacket
Identification:
Colour-coded fibres
Central Tube:
Gel filled
Jacket (Black)
Material: LS0H— LS0H Compound
Water Blocking Swellable
Tape and Aramid Yarn
Water Blocking Swellable
Tape and Aramid Yarn
Gel Filled Buffer Tubes
Gel Filled Buffer Tubes
Water Blocking Aramid Yarn
Central Strength Member:
Light-weight solid dielectric
Rip Cord:
Applied longitudinally under cable jacket
Water Blocking Aramid Yarn
Central Strength Member
Light-weight solid dielectric
Rip Cord
Applied longitudinally under cable jacket
Identification:
Colour-coded fibres and tubes
Identification
Colour-coded fibres and tubes
48-144 Strands
16-36 Strands
2-12 Strands
XGLO Singlemode, OS2
XGLO (550) Multimode, 50/125, OM4
XGLO Multimode (300) 50/125, OM3
LIGHTSYSTEM Multimode
50/125,OM2; 62.5 OM1
STANDARDS COMPLIANCE
STANDARDS COMPLIANCE
STANDARDS COMPLIANCE
STANDARDS COMPLIANCE
• ISO/IEC 11801:Ed 2.0 Amendment:1:2008
• ISO/IEC 11801:2002 OM3
• ISO/IEC 11801:2002 OM3
• ISO/IEC 11801:2002 OM1 (62.5/125)
• ANSI/TIA/EIA-568-B.3
• ISO/IEC 11801:2002 Ammendment 2 OM4
• ANSI/TIA/EIA-568-B.3
• ISO/IEC 11801:2002 OM2 (50/125)
• Telcordia GR-409-CORE
• ANSI/TIA/EIA-568-C.3
• ANSI/TIA/EIA-568-B.3-1
• ANSI/TIA/EIA-568-B.3
• ITU-T G.652.C/D
• ANSI/TIA-492 AAAD
• ANSI/TIA-492 AAAC
• ANSI/TIA-598-C
• IEC 60332-3
IEC 60332-1-2 (Single strand),
IEC 60754-2 (Acid gas),
IEC 61034-2 (Smoke density)
• IEC 60793-2-10 fibreType A1a.3
• Telcordia GR-409-CORE
• ANSI/TIA-492 AAAB
• Telcordia GR-409-CORE
• IEC 60332-3
IEC 60332-1-2 (Single strand),
IEC 60754-2 (Acid gas),
IEC 61034-2 (Smoke density)
• Telcordia GR-409-CORE
APPLICATIONS SUPPORT
APPLICATIONS SUPPORT
• IEC 60332-3
IEC 60332-1-2 (Single strand),
IEC 60754-2 (Acid gas),
IEC 61034-2 (Smoke density)
APPLICATIONS SUPPORT
APPLICATIONS SUPPORT
6.18
Jacket (Black)
Material:LS0H— LS0H Compound
• IEC 60332-3
IEC 60332-1-2 (Single strand),
IEC 60754-2 (Acid gas),
IEC 61034-2 (Smoke density)
APPLICATION
DISTANCE (m)
APPLICATION
DISTANCE (m)
APPLICATION
DISTANCE (m)
APPLICATION
10GBASE-L (1310 nm)
8,000
10GBASE-SX (850 nm)
550
10GBASE-SX (850 nm)
300
10GBASE-SX (850 nm)
DISTANCE (m)
10GBASE-E (1550 nm)
30,000
10GBASE-LX4 (1300 nm)
300
10GBASE-LX4 (1300 nm)
300
50/125µm
82
10G Fibre Channel (Serial-1310 nm)
10,000
1000BASE-SX (850 nm)
1000
1000BASE-SX (850 nm)
900
62.5/125µm
26
10G Fibre Channel (WDM-1310 nm)
10,000
1000BASE-LX (1300 nm)
600
1000BASE-LX (1300 nm)
600
1000BASE-SX (850 nm)
1000BASE-LX (1300 nm)
5,000
Fibre Channel 266 (1300 nm)
1,500
Fibre Channel 266 (1300 nm)
1,500
50/125µm
Fibre Channel 266/1062 (1300 nm)
10,000
ATM 622 (1300 nm)
500
ATM 622 (1300 nm)
500
62.5/125µm
275
ATM 52/I55/622 (1300 nm)
15,000
ATM 155 (1300 nm)
2,000
ATM 155 (1300 nm)
2,000
1000BASE-LX (1300 nm)
550
ATM 52 (1300 nm)
3,000
ATM 52 (1300 nm)
3,000
Fibre Channel 266 (1300 nm)
1,500
FDD1 (Original-1300 nm)
2,000
FDD1 (Original-1300 nm)
2,000
ATM 622 (1300 nm)
500
100BASE-FX (1300 nm)
2,000
100BASE-FX (1300 nm)
2,000
ATM 155 (1300 nm)
2,000
ATM 52 (1300 nm)
3,000
550
FDDI (Original-1300 nm)
2,000
100BASE-FX (1300 nm)
2,000
www.siemon.com
Siemon Master Cat
2/25/11
12:18 PM
Page 79
FIBRE
XGLO™ 10 Gigabit Ethernet Fibre Optic
Cable
Minimum Performance Parameters for XGLO 50/125µm Multimode Fibre
Guaranteed Gigabit
Transmission
Distance (m)
Fibre
Type
Guaranteed 10 Gigabit
Transmission
Distance (m)
Minimum Bandwidth
(MHz • km)
Maximum Attenuation
(dB/km)
Group Index
of Refraction
850 nm
1300 nm
850 nm†
1300 nm††
850 nm
1300 nm
850 nm
1300 nm
850 nm
1300 nm
900
600
300
300
RML - 2000
OFL - 1500
OFL - 500
3.5
1.0
1.483
1.479
1040
600
550
300
RML - 4700
OFL - 3500
OFL - 500
3.0
1.0
1.483
1.479
50/125
(OM3)
50/125
(OM4)
† 10GBASE-S †† 10GBASE-LX4
Minimum Performance Parameters for XGLO Singlemode fibre
Fibre
Type
Singlemode
(0S2)
Wavelength
(nm)
Maximum
Attenuation
(dB/km)
Zero Dispersion
Wavelength (nm)
1310
1550
1310-1625
0.40
0.30
<0.40
1312 ± 10
1312 ± 10
1312 ± 10
Zero Dispersion
Slope (nm2-km)
≤0.089
≤0.089
≤0.089
Index of
Refraction
Mode Field Diameter
(microns)
1.468
1.468
1.468
9.2 ± 0.4
10.4 ± 0.5
N/A
LightSystem® Gigabit Ethernet Fibre Optic Cable
Minimum Performance Parameters for LightSystem 50/125µm & 62.5/125µm Multimode Fibre
Fibre
Type
50/125µm
(OM2)
62.5/125µm
(OM1)
Maximum
Attenuation
(dB/km)
Minimum Modal
Bandwidth
(MHz km)
Guaranteed Gigabit
Transmission Distance
(Metres)
Index of Refraction
Wavelength
nm
850
3.5
500
550
1.483
1300
850
1300
1.0
3.5
1.0
500
200
500
550
275
550
1.479
1.495
1.490
*The protocol pertinent to the transmission distance as noted is Gigabit Ethernet per IEEE 802.3:2005.
XGLO and LightSystem Physical Specifications
Fibre
Count
Nominal
Cable Diameter
2
4
6
8
12
16
24
36
48
72
96
144
Maximum Pulling Tension
(Newtons)
Nominal
Net Weight
(mm)
Installation
Long Term
(kg/km)
7.7
7.7
7.7
7.7
7.7
10.1
10.1
10.1
10.8
10.8
12.0
12.0
1000
1000
1000
1000
1000
1800
1800
1800
1800
1800
1800
1800
500
500
500
500
500
1200
1200
1200
1200
1200
1200
1200
67
67
67
67
67
103
103
103
115
115
139
139
Fibre
Count
Minimum Crush
Resistance
(N/10cm)
Operating
Temperature
(°C)
Storage
Temperature
(°C)
Minimum Bend Radius
Installation
Long Term
2-12
1000
--40/60
-40/60
20 x DIA.
10 x DIA.
16-144
2200
-40/60
-40/60
20 x DIA.
10 x DIA.
Custom lengths and jacket colours are available upon request. Contact our Customer Service Department for more information.
Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.
XGLO® and LightSystem® are trademarks of Siemon
www.siemon.com
6.19

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project