Panasonic CNGP50N User manual

Panasonic CNGP50N User manual
Portable Navigation System
CN-GP50N
Operating Instructions
Navigation Software
English (UK)
V1.0
Before using this product, please read the "Safety information" in the "Important
information" document.
Copyright
The information contained herein may be changed at any time without prior
notification. This manual nor any parts thereof may not be reproduced for any
purpose whatsoever without the express written consent of Matsushita Electric
Industrial Co., Ltd., nor transmitted in any form either electronically or mechanically,
including photocopying and recording. All technical specifications, drawings etc are
subject to copyright law.
© 2007, Matsushita Electric Industrial Co., Ltd.
All rights reserved.
Table of Contents
1
2
3
4
Introduction .......................................................................................5
1.1
About this Manual ..................................................................................5
1.2
Legal Notice ...........................................................................................5
Liability.....................................................................................5
1.2.2
Trademarks..............................................................................5
1.3
Customer Service ..................................................................................5
1.4
Safety Information..................................................................................5
Using the Navigation System for the First Time ............................6
Operating the Navigation System....................................................6
3.1
Volume...................................................................................................6
3.2
Opening the Map ...................................................................................6
3.3
Opening the Menu Window ...................................................................7
3.4
Further Functions of the Navigation Device...........................................7
3.5
Information .............................................................................................7
3.6
Software Keyboard ................................................................................8
3.7
Lists........................................................................................................9
3.8
Options...................................................................................................9
Navigation .......................................................................................10
4.1
5
1.2.1
Search for a Destination ......................................................................10
4.1.1
Search for a Destination Country...........................................10
4.1.2
Address..................................................................................10
4.1.3
Point of Interest (POI) ............................................................11
4.1.4
Information about the Destination..........................................13
4.1.5
Direct Access to POI..............................................................14
4.1.6
Last Destinations ...................................................................14
4.1.7
Favourites ..............................................................................14
4.2
Navigating Homewards........................................................................15
4.3
Voice Commands ................................................................................15
4.4
Determining Destinations on the Map..................................................16
4.5
Starting Navigation ..............................................................................16
Managing Destinations...................................................................17
5.1
Saving Destinations .............................................................................17
5.2
Editing Favourites ................................................................................18
5.2.1
Changing the Name...............................................................18
5.2.2
Defining as Home Address ....................................................18
5.2.3
Setting up a Voice Command ................................................19
5.2.4
Changing the Icon..................................................................19
Table of Contents
- III -
5.3
6
Routes with Stages.........................................................................20
6.1
Route Planning ....................................................................................20
6.1.1
Entering the Starting Point.....................................................20
6.1.2
Entering Route Points............................................................21
6.1.3
Editing Route Points ..............................................................21
6.2
Saving Routes .....................................................................................22
6.3
Managing Routes.................................................................................22
6.4
7
8
Deleting Favourites ..............................................................................19
6.3.1
Loading Routes......................................................................22
6.3.2
Renaming Routes ..................................................................22
6.3.3
Deleting Routes .....................................................................23
Navigation ............................................................................................23
6.4.1
Calculating and Displaying Routes ........................................23
6.4.2
Simulating Routes..................................................................23
6.4.3
Starting Navigation ................................................................24
Options ............................................................................................24
Working with the Map.....................................................................26
8.1
Maps ....................................................................................................26
8.2
Map in Standard Mode ........................................................................26
8.3
Map in Preview Mode ..........................................................................27
8.4
Map in Navigation Mode ......................................................................28
8.5
Map in Destination Search Mode.........................................................30
8.5.1
9
10
11
- IV -
Operating in Destination Search Mode..................................31
Useful Functions.............................................................................33
9.1
GPS Status, Storing the Current Location ...........................................33
9.2
TMC (Traffic Information).....................................................................33
9.2.1
Displaying Traffic Messages..................................................33
9.2.2
TMC Settings .........................................................................34
Changing the Navigation Settings.................................................35
Index ................................................................................................37
Table of Contents
1
Introduction
1.1
About this Manual
For better legibility and clarification, the following styles are used in this
manual:
Bold and italics:
Registered names, company and product descriptions.
SMALL CAPITALS:
Window and dialogue box titles.
Bold:
Highlighting of important parts in the text.
Underlined:
Descriptions of buttons, input fields and other elements
on the user interface.
1.2
Legal Notice
1.2.1
Liability
The software and the present manual are subject to change without
notice. Panasonic is not liable for the accuracy of the information
contained in this manual or for damages resulting from the use of this
manual.
1.2.2
Trademarks
All brands and trademarks mentioned in this document are possibly
registered by third parties and subject to the current legislation and
rights of their respective owners without reservation. All names of
products, societies or brands may be registered trademarks of their
respective owners. All rights that are not explicitly accorded are
reserved.
The absence of the explicit labelling of registered trademarks used in
this manual does not imply that the brand is not subject to the rights of a
third party.
1.3
Customer Service
Please find information on the Customer Service on the PAN
EUROPEAN GUARANTEE (Warranty card).
1.4
Safety Information
Before using this product, please read the "Safety information" in the
"Important information" document.
Introduction
-5-
2
Using the Navigation System for the First
Time
The navigation system is ready for use after it has been connected to
the power supply.
1. Turn the device on.
The LANGUAGE window opens.
2. Tap on the language you would like to use.
The map opens in Standard mode. It shows the Arc de Triomphe in
Paris. Your current position will be displayed as soon as GPS reception
is sufficient to determine it.
3
Operating the Navigation System
3.1
Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
While the map is open:
1. Tap the
(Volume) button.
The volume bar opens. It contains three buttons for adjusting the
volume.
(Louder),
2. Tap the
(Quieter),
(Volume on/off).
(Volume) button again.
The volume bar closes.
The volume bar closes automatically when you don't operate it for
some seconds.
3.2
Opening the Map
The map may be opened from almost any window.
►
Tap the
(Show Map) button.
The map opens in Standard mode. It displays your current location. If
GPS reception is not sufficient to determine the current location it
displays the last known location.
-6-
Using the Navigation System for the First Time
Note: The map opens in Navigation mode when you are currently
navigating.
3.3
Opening the Menu Window
Any window showing the map has a Menu button.
►
Tap the Menu button.
The MENU window opens. Here you may access the complete
functionality of the navigation device.
3.4
Further Functions of the Navigation Device
This navigation device offers functions other than navigation.
►
►
3.5
Tap the Picture button in the MENU window if you want to view
pictures.
Tap the Phone button in the MENU window if you want to use the
navigation device as a hands-free kit.
Information
When the map is open, symbols located at the right hand side of the
screen are used to display information.
GPS
The GPS symbol can show the following GPS reception status:
No GPS: The built-in GPS receiver is not operational. Contact customer
service if the problem persists.
No Signal: Data is being received from less than three satellites. The
position cannot be calculated.
GPS Ready: Data is being received from at least three satellites. The
position can be calculated.
Information: For more detailed information regarding GPS status,
please refer to chapter "GPS Status, Storing the Current Location" on
page 33.
Energy
The Energy symbol can display the following conditions of the built-in
battery:
Operating the Navigation System
-7-
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
TMC (Traffic Information)
A TMC Traffic Receiver (CY-TM200N) may be connected to the
navigation system. This enables the system to change the route
dynamically in order to avoid a traffic jam, for example.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can display the following TMC reception status:
No Symbol: There is no TMC Traffic Receiver connected, or the
connected or built-in TMC Traffic Receiver is not operational.
Tuning: The TMC Traffic Receiver is operational, but cannot find a
station that is transmitting TMC signals.
TMC on Standby: Traffic messages can be received.
Information: For details on TMC functionality, please refer to chapter
"TMC (Traffic Information)" on page 33.
3.6
Software Keyboard
A software keyboard appears on the screen when text entries are
necessary.
All entries can be made on the software keyboard using the fingertips.
Only capital letters can be entered.
Note: Tap Settings > Basic Settings > Keyboard layout to select one of
several available keyboard layouts. For detailed information on
configuration, please refer to chapter "Changing the Navigation
Settings" on page 35.
When entering town or street names you need not enter any special
characters or umlauts. The navigation system fills in these characters
for you automatically. If, for example, you are searching for “Würzburg”,
then simply enter "WURZBURG". Special characters may be helpful
when naming saved destinations and itineraries, however.
-8-
Operating the Navigation System
Special Keys
enters a space character.
deletes the character in front of the cursor.
opens the numeric keypad.
opens the letter keyboard.
opens the special characters keyboard. As soon as you have
entered a special character the letter keyboard reappears.
3.7
Lists
Often, lists appear from which you can select an entry. This is the case,
for example, when you enter the name of a town.
As soon as you enter the first letter, the largest city in the given country
that begins with this letter appears.
As soon as you enter the second letter, a list appears with all other
locations that begin with the given letters.
If you enter additional letters, the list adapts to your entries. It only
contains entries that begin with the text that has been entered or
contain the text in the name. The more letters you enter, the shorter the
list will become.
You can toggle the list by means of the
buttons.
Up and
Down
In order to accept an entry from the list, simply tap on it.
The list closes as soon as you have accepted an entry.
3.8
Options
Some windows offer options that lead to further functions.
Information: A description of all available options can be found in
chapter "Options" on page 24.
Operating the Navigation System
-9-
4
Navigation
Impaired GPS Reception
If GPS reception is impaired, navigation will be interrupted. The
navigation software remains active.
As soon as GPS reception is restored, the navigation system calculates
any change of position which has occurred in the meantime. You may
simply continue navigation.
Arriving at Your Destination
When you have reached the specified destination, a message to this
effect will be displayed.
Only your current position (triangle in red) will now be shown on the
map.
4.1
Search for a Destination
The COVERED COUNTRIES list opens if you want to enter an address or
to select a POI for the first time.
Tap on the country in which your destination lies.
4.1.1
Search for a Destination Country
The Country button is located above the right-hand upper corner of the
uppermost entry field of the POI IN A CITY, POI OF NATIONAL
SIGNIFICANCE, and ADDRESS windows. It shows the country code of the
country from which navigation destinations can currently be entered.
If your destination is in a different country, then proceed as follows:
1. Tap the Country button.
The COVERED COUNTRIES list opens.
2. Tap on the country in which your destination lies.
The COVERED COUNTRIES list closes.
The symbol will display the country code of the destination country.
Note: Only countries of which at least a part is represented on the
currently loaded map may be selected.
4.1.2
Address
1. In the MENU window, tap on Destination > Address.
The ADDRESS window opens.
2. Enter the name or the postal code of the destination location.
- 10 -
Navigation
3. Enter the name of the destination street. You can also enter the
name of a well-known object, e.g. "Olympic stadium" or "Eiffel
tower".
4. Enter the house number. If you don't know the house number, or if
you specified an object in the preceding step, then leave the field
empty.
If you do not know the house number, but know the name of a
nearby side street, then tap on the Cross Street field and enter the
name of this street. The navigation system will calculate a route to
the intersection of the streets you have specified.
Note: It is not necessary to enter all the address details.
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify the town and street without specifying a house number or
intersection, the navigation system will calculate a route to the centre of
the street specified.
5. Tap the Start Navigation button.
The map opens in Preview mode.
Note: For detailed information on how to start navigation, please refer
to chapter "Starting Navigation", page 16.
4.1.3
Point of Interest (POI)
Points of Interest, also called POIs (Points Of Interest) for short, are
useful addresses that are catalogued according to particular criteria.
Points of Interest include ports, airports, restaurants, hotels, petrol
stations, public buildings, doctor's surgeries, hospitals, shopping
centres, etc.
Points of interest can be displayed on the map by means of a symbol.
►
In the MENU window, tap on Settings > POI to select the categories
to be displayed on the map.
POI Nearby
Points of interest nearby are those POI that are located within a given
radius of your current location. This means you can always find the
nearest petrol station for example, no matter where you are.
Note: GPS reception must be sufficient for determining position. Look
at the
(GPS Ready) symbol to see whether GPS reception is
sufficient. For more detailed information, please refer to chapter "GPS
Status, Storing the Current Location" on page 33.
Navigation
- 11 -
Note: The Direct Access section offers three categories of POI from the
current vicinity which can be searched for quickly and without additional
entry. For more detailed information, please refer to chapter "Direct
Access to POI" on page 14.
1. In the MENU window, tap on Destination > POI > Nearby.
The POI NEARBY window opens.
2. Tap a category from which you would like to select a POI.
If sub-categories exist for the category you have selected, the Sub
Category list opens.
3. Specify the sub-category from which you would like to select a POI.
The Name of the Destination list opens. It contains the nearest POI
in the specified category, sorted by distance.
4. Tap on the name of the destination.
5. Tap the Start Navigation button.
The map opens in Preview mode.
Information: For detailed information on how to start navigation, please
refer to chapter "Starting Navigation", page 16.
POI of Nationwide Significance
POI of nationwide significance are airports, places of interest, national
monuments, large ports etc. This enables you to find places of interest,
for example, without having to know the name of the location.
1. In the MENU window, tap on Destination > POI > Nationwide.
The POI OF NATIONAL SIGNIFICANCE window opens.
2. Tap a category from which you would like to select a POI.
The Name of the Destination list opens. It contains POI from the
specified category, sorted alphabetically.
3. Tap on the name of the destination.
4. Tap the Start Navigation button.
The map opens in Preview mode.
Information: For detailed information on how to start navigation, please
refer to chapter "Starting Navigation", page 16.
POI in a City
POI in a given location can be useful when navigating in an unfamiliar
town.
1. In the MENU window, tap on Destination > POI > in a City.
- 12 -
Navigation
The POI IN A CITY window opens.
2. Enter the name or the postal code of the destination town.
3. Tap a category from which you would like to select a POI.
If sub-categories exist for the category you have selected, the Sub
Category list opens.
4. Specify the sub-category from which you would like to select a POI.
The Name of the Destination list opens. It contains POI from the
specified category, sorted alphabetically.
5. Tap on the name of the destination.
6. Tap the Start Navigation button.
The map opens in Preview mode.
Information: For detailed information on how to start navigation, please
refer to chapter "Starting Navigation", page 16.
4.1.4
Information about the Destination
For many addresses and POI there is further information stored in the
navigation system's database. This information is available when you
enter a destination in one of the ADDRESS, POI NEARBY, POI OF
NATIONAL SIGNIFICANCE, or POI IN A CITY windows.
There is, for example, a telephone number available for many
restaurants. You may then call there in order to reserve a table, for
example.
One of the destination entry windows described above is open.
►
Tap the
(Destination Info) button.
The DESTINATION INFO window opens. It contains all the information
about the specified destination that is stored in the navigation system's
database.
►
►
►
Tap the Cancel button to close the DESTINATION INFO window.
Tap the
map.
(Show on Map) button to show the destination on the
Tap the
(Call) button to call the number indicated.
Note: The Call function is only available when the navigation system is
connected via Bluetooth to a mobile phone.
Navigation
- 13 -
4.1.5
Direct Access to POI
The Direct Access section contains three categories of POI.
Destinations in your vicinity that correspond to one of these categories
can be listed quickly, without the need for additional entry.
►
In the MENU window, tap on Settings > POI to select the categories
available in the Direct Access section.
Note: GPS reception must be sufficient for determining position. Look
(GPS Ready) symbol to see whether GPS reception is
at the
sufficient. For more detailed information, please refer to chapter "GPS
Status, Storing the Current Location" on page 33.
1. In the MENU window, tap on Destination > POI.
The POI window opens.
The symbols of the categories which are available for Direct Access
can be seen at the bottom of the window.
2. Tap on the category from which you would like to select a POI.
The Name of the Destination list opens. It contains the nearest POI
in the specified category, sorted by distance.
3. Tap on the name of the destination.
The map opens in Preview mode.
Information: For detailed information on how to start navigation, please
refer to chapter "Starting Navigation", page 16.
4.1.6
Last Destinations
In the LAST DESTINATIONS list, the navigation system saves the last 30
destinations to which you have navigated.
1. In the MENU window, tap on Destination > Last Destinations.
2. Tap the destination to which you would like to navigate.
3. Tap the Start Navigation button.
The map opens in Preview mode.
Information: For detailed information on how to start navigation, please
refer to chapter "Starting Navigation", page 16.
4.1.7
Favourites
Destinations to which you want to travel often, can be saved in the
FAVOURITES list.
Up to 300 destinations can be saved in the FAVOURITES list.
- 14 -
Navigation
Information: Information on how to save a destination can be found in
chapter "Saving Destinations" on page 17.
1. In the MENU window, tap on Destination > Favourites.
2. Tap the destination to which you would like to navigate.
3. Tap the Start Navigation button.
The map opens in Preview mode.
Information: For detailed information on how to start navigation, please
refer to chapter "Starting Navigation", page 16.
4.2
Navigating Homewards
You can save one address as Home Address. Navigation to your home
address can be initiated quickly.
The first time you tap the Home button, you will be requested to enter
your address.
Information: Further information about entering your home address
can be found in chapter "Defining as Home Address" on page 18.
►
In the MENU window, tap on Destination > Home.
If you have not yet entered your home address, a dialog window will
notify you of this.
Navigation starts. The route profile used for the previous navigation
applies.
4.3
Voice Commands
You can designate voice commands to destinations in the FAVOURITES
list so that you can start navigation to these destinations "on command".
The route profile used for the previous navigation applies.
Information: You can set up a voice command when saving the
destination or at any later moment.
For information on setting up a voice command, please refer to chapter
"Setting up a Voice Command" on page 19.
1. In the MENU window, tap on Destination > Voice Command.
2. On prompting, repeat the voice command that you have set up for
the desired destination into the navigation system.
A dialog window shows the name of the destination.
3. Tap the Start Navigation button.
– OR –
Navigation
- 15 -
Wait some seconds.
The map opens in Preview mode.
Information: For detailed information on how to start navigation, please
refer to chapter "Starting Navigation", page 16.
4.4
Determining Destinations on the Map
You may indicate a destination directly on the map. In addition to towns
and streets, you may also select POI quickly.
1. Tap the
(Show Map) button in the MENU window.
The map opens in Standard mode.
2. Tap the
(Destination Search) button.
The map opens in Destination Search mode.
3. Tap on the point to which you want to navigate.
Note: Please refer to chapter "Map in Destination Search Mode" on
page 30 for detailed information on how to change the map view so that
your destination can easily be seen on it.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
4. Tap the
(OK) button.
The DESTINATION ON MAP window opens. The detailed address data
of the selected destination is displayed in the upper left-hand
corner.
5. Tap the Take Me There button.
The map opens in Preview mode.
Information: For detailed information on how to start navigation, please
refer to chapter "Starting Navigation", page 16.
4.5
Starting Navigation
The map is open in Preview mode.
The navigation destination is depicted by a small flag. The route and the
estimated trip time are displayed.
- 16 -
Navigation
Route Profile
A so called route profile forms the basis of the route calculation.
Tap the Route Profile button if you want to view or change the route
profile.
Note: If you change the route options, these remain valid for
subsequent navigation.
Information about how to change individual route profile settings can be
obtained by tapping on the corresponding
(Help) button.
Starting Navigation
►
Tap the Start Navigation button or simply start driving.
No GPS Reception
If the received GPS signal is insufficient, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
►
5
Wait. As soon as the GPS reception is sufficient for determining the
position, the route will be recalculated and you can begin the
navigation.
Tap the Cancel button. The window for destination entry opens.
Managing Destinations
Every destination that you enter and the destinations from the LAST
DESTINATIONS list may be saved to the FAVOURITES list. This makes
sense if you frequently navigate to a particular destination.
5.1
Saving Destinations
1. Enter a destination as described in "Search for a Destination" on
page 10. Do not tap the Start Navigation button!
- OR 1. Select a destination from the LAST DESTINATIONS list as described in
chapter "Last Destinations" on page 14. Do not tap the Start
Navigation button!
2. Tap Options > Save Destination.
3. Enter a name for the destination.
Managing Destinations
- 17 -
4. Tap the Home Address button if you want to save the destination as
your home address.
The Yes value is now written in black and underlined.
You can then always start navigation to this destination very quickly
by tapping Destination > Home in the MENU window.
5. Tap the Store a Voice Command button if you want to set up a
voice command for this destination, and follow the instructions
given on the screen.
You can then always start navigation to this destination very quickly
by tapping Destination > Voice Command in the MENU window and
repeating the stored command into the navigation device.
6. Tap the Change Icon button if you want to change the icon which
can be seen before the name of the destination. Then tap the icon
you want to use.
7. Tap the Save button.
5.2
Editing Favourites
One destination from the FAVOURITES list can be defined as home
address. You can change the name and the icon of any destination
from the FAVOURITES list. You can also set up or change a voice
command for any of these destinations.
1. From the FAVOURITES list, select the destination for which you want
to execute one of the changes mentioned above. (see chapter
"Favourites" on page 14)
2. Tap Options > Edit.
The EDIT window opens. It shows the current settings.
5.2.1
Changing the Name
You can change the name of any favourite.
3. Enter the new name of the destination.
4. Tap the Save button.
The previous window opens again.
The new name is displayed.
5.2.2
Defining as Home Address
Only one destination from the FAVOURITES list can be defined as your
home address.
You can then always start navigation to this destination very quickly by
tapping Destination > Home in the MENU window.
3. Tap the Home Address field.
- 18 -
Managing Destinations
The Yes value is now written in black and underlined.
4. Tap the Save button.
The previous window opens again.
The selected favourite has now been saved as your home address.
By default, its icon is a small house. Its name is now "My Address".
5.2.3
Setting up a Voice Command
You can set up a voice command for any destination from the
FAVOURITES list.
You can then always start navigation to this destination very quickly by
tapping Destination > Voice Command in the MENU window and
repeating the stored command into the navigation device.
3. Tap the Store a Voice Command field.
A dialog window prompts you to speak the voice command for the
selected destination into the navigation system.
4. Speak the command for the selected destination into the navigation
device.
The dialog window closes.
5. Tap the Save button.
The previous window opens again.
An asterisk (*) before the name of this favourite indicates that a
voice command has been set up for it.
5.2.4
Changing the Icon
An icon is displayed before the name of each favourite. To distinguish a
favourite you can assign a different icon to it.
3. Tap the Change Icon field.
4. Tap the icon you want to assign to the favourite.
5. Tap the Save button.
The previous window opens again.
The selected icon is shown before the name of the favourite.
5.3
Deleting Favourites
Any destination from the FAVOURITES list can be deleted.
1. Select the destination you want to delete from the FAVOURITES list.
(see chapter "Favourites" on page 14)
2. Tap Options > Delete.
A dialog window prompts you to confirm deletion.
Managing Destinations
- 19 -
3. Tap the Yes button.
The FAVOURITES list opens. The deleted destination is no longer
listed.
6
Routes with Stages
It is possible to plan routes without GPS reception, in the comfort of
your home for example. Planned routes can be saved for later use. This
allows you to plan as many routes as you like e.g. for your holidays.
6.1
Route Planning
►
In the MENU window, tap on Destination > Route Planning.
The ROUTE PLANNING window opens.
6.1.1
Entering the Starting Point
The starting point of a route is the point at which you want to begin your
trip. This is not necessarily the current location. If you are planning a
route for your holidays at home, you could, for example, enter your
hotel as the starting point.
The starting point is only important if you want to see a planned route
on the map, but currently have no GPS reception, or you are not
currently at the planned starting point. The starting point that you enter
therefore has the flow number "0".
As soon as you start navigation, your current location will be used as
the starting point for the route calculation.
The first stage is therefore the trip to the route point with the flow
number "1".
1. Tap the Specify Starting Point field.
The STARTING POINT menu opens.
If you want to enter your current location as the starting point:
2. Tap on the Current Position menu item.
If you want to enter a different starting point:
2. Tap the corresponding button.
3. Enter the starting point. (See the corresponding section of chapter
"Navigation" on page 10)
4. Tap the Set Starting Point button.
The selected starting point will now be displayed next to the
0 (Starting Point) button.
- 20 -
Routes with Stages
Changing the Starting Point
►
Tap the Specify Starting Point field.
The STARTING POINT menu opens. You can now enter a different
starting point. Proceed as described above.
6.1.2
Entering Route Points
Route points of a route are destinations that you want to navigate to.
The flow number for each route point can be found on a button in front
of it.
1. Tap the Add Route Point field.
The ROUTE POINT menu opens.
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of chapter
"Navigation" on page 10)
4. Tap the Add button.
The selected route point is now shown next to its flow number.
Repeat these steps for each destination that you want to add to your
route.
6.1.3
Editing Route Points
Route points can be deleted from a route. The order of the route points
can be varied as you like.
Note: The start point (flow number "0") can neither be moved nor
deleted.
►
Tap on the route point that you want to edit.
The context menu contains the following buttons:
Route Point Up: Moves the selected route point forwards.
(Example: route point 2 becomes route point 1).
Route Point Down: Moves the selected route point backward.
(Example: route point 2 becomes route point 3).
Delete: Deletes the selected route point. A dialog window prompts
you to confirm deletion.
►
Routes with Stages
Tap on the route point's flow number to close the context menu.
- 21 -
Information: For detailed information on how to start navigation, please
refer to chapter "Navigation", page 23.
6.2
Saving Routes
You can save each planned route under a particular name.
Note: Only the start point and route points will be saved, not, however,
the calculated route. If you load a saved route, it must be recalculated
before navigation can start.
The ROUTE PLANNING window is open. You have entered the starting
point and at least one route point.
1. Tap Options > Save Route.
2. Enter a name for the route.
3. Tap the Save button.
The destination is now saved to the LOAD ROUTE list. The dialog
window closes.
6.3
Managing Routes
You can load, rename or delete stored routes.
The ROUTE PLANNING window is open.
1. Tap Options > Load Route.
The LOAD ROUTE list opens.
6.3.1
Loading Routes
2. Tap the route that you want to load.
3. Tap the Load Route button.
The ROUTE PLANNING window opens. The starting point and the
route points of the loaded route have been entered.
6.3.2
Renaming Routes
2. Tap the route that you want to rename.
3. Tap Options > Rename.
4. Enter the new name of the route.
5. Tap the Save button.
The LOAD ROUTE list opens.
The new name displays.
- 22 -
Routes with Stages
6.3.3
Deleting Routes
2. Tap the route that you want to delete.
3. Tap Options > Delete.
A dialog window prompts you to confirm deletion.
4. Tap the Yes button.
The LOAD ROUTE list opens. The deleted route is no longer listed.
6.4
Navigation
The route must be calculated first. You may then start navigation or just
simulate it.
6.4.1
Calculating and Displaying Routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The ROUTE PLANNING window is open. The starting point and at least
one route point have been entered.
1. Tap the Show Route button.
The map opens in Preview mode.
The starting point and the route points are marked by flags. For
each stage, the distance and the estimated trip time is given. This
data is also displayed for the entire route.
6.4.2
Simulating Routes
It is also possible to simulate navigation.
Note: The reception of GPS signals is not necessary for simulation.
Simulation is restricted to routes of 100 km (60 mi) max.
You have calculated and displayed a route.
►
Tap Options > Simulation.
The route will be recalculated for simulation purposes. Simulation
starts when calculation has finished.
Stopping Simulation
You may stop simulation at any time.
►
Tap the Menu button.
The MENU window opens.
Routes with Stages
- 23 -
6.4.3
Starting Navigation
You have calculated and displayed a route.
Route Profile
A so called route profile forms the basis of the route calculation.
Tap the Route Profile button if you want to view or change the route
profile.
Note: If you change the route options, these remain valid for
subsequent navigation.
Information about how to change individual route profile settings can be
obtained by tapping on the corresponding
(Help) button.
Starting Navigation
►
Tap the Start Navigation button or simply start driving.
No GPS Reception
When the received GPS signal is not sufficient, the following message
appears:
"GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
►
7
Wait. As soon as the GPS reception is sufficient for determining the
position, the route will be recalculated and you can begin
navigation.
Tap the Cancel button. The ROUTE PLANNING window opens.
Options
Some windows offer options that lead to further functions.
►
Tap on the Options button to open the options list.
►
Tap the option you would like to execute.
►
If you would like to quit the options list without selecting an option,
tap the Options button again.
Delete: Deletes the selected destination from the FAVOURITES list or the
selected route from the LOAD ROUTE list. A dialog window prompts you
to confirm deletion.
- 24 -
Options
Delete All: Deletes all destinations from the LAST DESTINATIONS list. The list is
then empty. A dialog window prompts you to confirm deletion.
Delete Destination: Deletes the highlighted destination from the list (LAST
DESTINATIONS or FAVOURITES). A dialog window prompts you to confirm
deletion.
Edit:
Opens a window to edit the selected destination.
Factory Settings: Opens a window in which you can reset all settings to the
original factory settings.
GPS:
Opens the GPS STATUS window. Here you can see details regarding
GPS reception. You can also save the data of your current location.
For more detailed information, please refer to chapter "GPS Status,
Storing the Current Location" on page 33.
Load Route: Opens a dialog window in which you can load a stored route.
New Route: Deletes the starting point and all route points from the ROUTE
PLANNING window, so that you can plan a new route.
If necessary, save the previously planned route!
Rename: Opens a window in which you can change the name for the selected
route.
Save Destination: Saves the specified address or destination in the FAVOURITES
list.
For detailed information, please refer to chapter "Saving Destinations" ,
page 17.
Save Route: Opens a window in which you can save the planned route under a
specific name.
For detailed information, please refer to chapter "Saving Routes", page
22.
Settings: Opens the SETTINGS window. Here you can configure the navigation
system.
For detailed information, please refer to chapter "Changing the
Navigation Settings", page 35.
Show on Map: Shows the specified address on the map.
Simulation: Simulates a navigation based along the displayed route. This
simulation can be performed without GPS reception. Simulation is,
however, restricted to routes of max 100 km (60 mi).
Touch screen Calibration: Opens a window in which you can recalibrate the
touch screen (realign) should it react imprecisely to touch.
Options
- 25 -
Traffic: Opens the TRAFFIC INFORMATION window in which pending reports are
listed.
For detailed information, please refer to chapter "TMC (Traffic
Information)", page 33.
8
Working with the Map
8.1
Maps
Even if you have stored several navigation maps on the SD Memory
Card in your navigation system, it can only operate with one map at a
time.
In the MENU window, tap Settings > Current Map in order to see which
map is currently being used. You can also select another map here.
8.2
Map in Standard Mode
The map is always in Standard mode when you are not navigating,
when you have not calculated a route, and when no destination is being
searched for on the map.
The following characteristics are typical of this view:
Your current position is indicated by a triangle in red in the middle of the
lower third. If you move, the position of the triangle will not move on the
screen. Instead, the visible map section will scroll, corresponding to
your position.
The system selects the scale of the map depending on your current
speed.
►
- 26 -
Tap the
(Destination Search) to open the map in
Destination Search mode.
Working with the Map
Information: For more detailed information, please refer to chapter
"Map in Destination Search Mode" on page 30.
Functions of the Map in Standard Mode
When the map is open in Standard mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol for the mode that is
currently set is marked orange.
Day/Night: Changes the display mode between "day" and "night". The symbol
for the mode that is currently set is marked orange.
8.3
Map in Preview Mode
You have entered a destination and tapped the Start Navigation button.
- OR You have planned or loaded a route and tapped the Show Route
button.
The map opens in Preview mode. The entire route is visible.
1
2
The route is highlighted in orange.
A triangle in red shows the current position.
If you display a planned or loaded route and the specified starting point
is not your current location, then the current position is possibly not
shown on the preview.
3
The destination is marked with a little flag.
If you display a planned or loaded route, the starting point and each
route point will be marked with a little flag.
Working with the Map
- 27 -
4
You will see the total distance for the route in a small info box, together
with the estimated trip time and the estimated time of arrival.
Note: The data displayed depends on the settings you have configured
in the MENU window under Settings > Basic Settings.
If you display a route with several stages, you will see this information
for each stage.
►
►
Tap the Route Profile button, in order to view or change the settings
on which the route calculation is based.
Tap the Start Navigation button in order to begin the trip.
When you display a planned or loaded route, the route may be
recalculated. Starting point for the calculation is your current
location. You will now be guided to the first route point entered.
►
8.4
Tap on
(Destination Search), in order to view the map in
Destination Search mode. (Refer to "Map in Destination Search
Mode” page 30)
Map in Navigation Mode
After the route has been viewed in Preview mode, the navigation has
been started.
The map opens in Navigation mode.
1
Signposting to be followed is displayed here.
2
Effective speed limits are displayed here (where available).
3
The route is marked by the colour orange.
4
The traffic lanes to be followed to your destination are depicted in the
colour orange.
- 28 -
Working with the Map
5
When two manoeuvres need to be executed in quick succession, the
small arrow field indicates the second manoeuvre to be executed.
6
The large arrow field shows a schematic depiction of the next junction
which you should turn on to. The remaining distance to this junction is
displayed beneath.
As you get closer to the junction, you will see a spot diagram instead of
the distance.
The nearer you get to the junction, the fewer yellow spots are displayed.
If you don't have to change direction for a longer period, you will see
only a forward-facing arrow. The distance for which you are to follow the
road you are on is displayed beneath the arrow.
►
Tap the large arrow-field to hear current route instructions.
7
A triangle in red shows your current position on the map. The map
sector displayed changes continually so that your current position is
always more or less centred on the map.
8
The height above sea level and the current speed are displayed here.
9
The remaining distance to the destination, the estimated duration of the
trip, and the estimated time of arrival can be seen in the Total field.
10
If you are navigating a route with several stages, you will see the
remaining distance to the next interim destination, the estimated
duration of the trip, and the estimated time of arrival in the Next field.
11
The name of the next stretch of road that you must travel on is
displayed in the upper street field.
12
The name of the street you are currently travelling on is displayed in the
lower street field.
Note: The displays for many of the above mentioned fields can be
configured under Options > Settings > Basic Settings. Some fields are
only visible if the corresponding information is available in the map data.
Note: If you tap on the large arrow field, the current route instruction will
be repeated.
►
Tap on
(Destination Search), in order to view the map in
Destination Search mode. (Refer to "Map in Destination Search
Mode” page 30)
Working with the Map
- 29 -
Quitting Navigation
1. Tap the Menu button.
The MENU window opens.
2. Tap the Stop Navigation button to quit navigation.
A dialog window prompts you to confirm.
3. Tap the Yes button.
Functions of the Map in Navigation Mode
When the map is open in Navigation mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol for the mode that is
currently set is marked orange.
Day/Night: Changes the display mode between "day" and "night". The symbol
for the mode that is currently set is marked orange.
Interim Destination: Opens the menu for entering a way point.
The navigation system will first guide you to this interim destination.
Afterwards, you can simply continue your original navigation.
Skip Route Point: Tap this button to omit the next route point. This button is
inactive when less than 2 route points are pending.
Block: Tap this button in order to block a section of the route that lies in front of
you, i.e. to recalculate the route in order to avoid this section of the
route, e.g. if you have heard of a traffic jam relating to this section on
the radio.
Tap this button again to remove the block.
POI on Your Route: Tap this button to display POI on your route. This enables
you to find out, for example, how far it is to the nearest services. A
destination shown here can be added as an interim destination by
tapping the
the list.
8.5
(Interim Destination) button to the right of its entry in
Map in Destination Search Mode
The map is always in Destination Search mode when a pair of cross
hairs can be seen.
When you are driving, the map's orientation does not change. It is
always oriented with north at the top.
- 30 -
Working with the Map
Zoom Out: The map section shown becomes larger, but you will see
fewer details.
Zoom In: The map section becomes smaller, but you will see more
details.
Zoom Mode: When this button is active, you can plot a map section with
your finger.
Plot the map section from upper left to bottom right and it will then zoom
to fit the screen size.
Plot the map section from bottom right to top left, and the map will zoom
out.
Pan Mode: When this button is active, you can move the map section
with your finger. Simply drag the map in the desired direction.
Entire Route: Zooms the map so that the entire route is visible.
Current Position: Selects the map section shown so that the current
location is centred.
8.5.1
Operating in Destination Search Mode
1. Tap on the point to which you want to navigate.
The destination that you have selected appears under the cross
hairs.
Working with the Map
- 31 -
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap the
(OK) button.
Buttons with various functions will be displayed.
Note: Not all functions are always available. The Interim Destination
function for example is only available when you are currently navigating.
Take Me There: Starts navigation to the selected point. If you are currently
navigating, this route navigation will be cancelled.
Interim Destination: Sets the selected point as way point. The navigation system
will first guide you to this interim destination. Afterwards, you can simply
continue your original navigation.
This function is only active during navigation.
Set as Destination: Adds the selected point as the last point in the route plan. If
no route plan was open, the selected point will become the first point in
a new route plan.
Save: Opens the SAVE DESTINATION AS... window. You can enter a name,
under which the selected point will be stored in the FAVOURITES list.
Information: For more detailed information, please refer to chapter
"Saving Destinations" on page 17.
Search Nearby: Opens the POI NEARBY window. Here you can search for
destinations near the specified point. (see "POI Nearby" on page 11)
►
►
Tap
(Destination Search), in order to quit the Destination
Search mode. You will be returned to the window from which you
started this mode.
Tap the Menu button, in order to return to the MENU window.
Add to Route: Opens route planning. The address specified will be added as the
first route point of a new route.
For detailed information, please refer to chapter "Routes with Stages",
page 20.
- 32 -
Working with the Map
9
Useful Functions
9.1
GPS Status, Storing the Current Location
In the GPS STATUS window, you will find an overview of the data the
navigation system retrieves from the received GPS signals.
1. In the MENU window, tap on Information > GPS.
The current location can be stored in the FAVOURITES list.
2. Tap the Save Position button.
The SAVE DESTINATION AS... dialog window opens. The cursor
blinks in the Name field.
3. Enter a name for the destination.
4. Tap the Home Address button if you want to save the destination as
your home address.
The Yes value is now written in black and underlined.
You can then always start navigation to this location very quickly by
tapping Destination > Home in the MENU window.
5. Tap the Store a Voice Command button if you want to set up a
voice command for this destination, and follow the instructions
given on the screen.
You can then always start navigation to this destination very quickly
by tapping Destination > Voice Command in the MENU window and
repeating the stored command into the navigation device.
6. Tap the Change Icon button if you want to change the icon which is
to be seen before the name of the destination. Then tap the icon
you want to use.
7. Tap the Save button.
9.2
TMC (Traffic Information)
An external TMC Traffic Receiver (CY-TM200N) may be connected to
the navigation system. This enables the system to change the route
dynamically in order to avoid a traffic jam, for example.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
9.2.1
Displaying Traffic Messages
The current traffic reports are available via the options of several
windows.
Useful Functions
- 33 -
►
In the MENU window, tap on Information > Traffic.
The TRAFFIC INFORMATION window opens.
Selecting the Type of Displayed Messages
Above the list, the Traffic reports button shows the type of traffic
messaging listed and how many messages of this type are listed.
1. Tap the Traffic reports button.
2. Select the type of messages to be displayed.
3. Tap the OK button.
Displaying Message Details
For each traffic message in the list, information about the location and
type of traffic obstruction will be displayed.
►
Tap the
(Information) button of the message for which you
would like to see details.
Avoiding / Ignoring Congestions
The navigation system can Avoid (
) or Ignore (
) congestion on
the route. The Avoid / Ignore button shows the corresponding status.
►
►
9.2.2
Tap the button to select the alternative setting.
Tap the
window.
(Back) button to close the TRAFFIC INFORMATION
TMC Settings
►
In the TRAFFIC INFORMATION window, tap on TMC Settings.
In the TMC SETTINGS window, you can set and configure the TMC traffic
station, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
Tuning Mode
Tap the Tuning Mode button to determine the settings for the station
you have chosen to receive traffic information.
►
►
- 34 -
Automatically: Use the arrow keys of the station section to select
another station. The system will search for another station if
reception becomes poor.
Hold station: Use the arrow keys of the station section to select
another station. The system will search for the same station on a
different frequency if the signal becomes poor.
Useful Functions
►
Hold frequency: Use the arrow keys of the station section to select
another station. The system will not search for another station if
reception becomes poor.
Recalculate Route
Tap on Recalculate Route to determine the effect new messages
concerning your route have on route calculation.
►
►
10
Automatically: An alternative route avoiding the traffic obstruction
will be calculated automatically.
On request: New messages will be displayed. In this window, you
can determine whether or not an alternative route should be
calculated.
Changing the Navigation Settings
The SETTINGS window is the point from which you can start customising
the navigation system to match your personal preferences.
►
In the MENU window, tap on Settings.
The SETTINGS window has numerous buttons: Current Map, POI,
Basic Settings and Route Profile.
►
Tap a button to open the corresponding settings window.
The settings of the individual windows are distributed on several screen
pages. You can toggle between these screens with the
Left) and
(To the
(To the Right) buttons.
Some settings can only accept two or three different values. These
(Toggle) button. All possible
settings can be recognised by the
values are visible. The current value is written in black and underlined.
►
Tap the
values.
(Toggle) button to alternate between the possible
Some settings can accept several different values. These settings can
be recognised by the
is visible.
Changing the Navigation Settings
(List) button. The value that is currently valid
- 35 -
1. Tap the
(List) button.
A list with all possible values opens. The value that is currently valid
is marked.
2. Tap the desired value.
3. Tap the OK button.
The list closes. The new value will be displayed.
For each setting there is a
(Help) button. When you tap it, you will
see a precise explanation of the corresponding setting.
You can close the settings windows in two ways:
►
Tap the Done button.
Any changes you have made will be adopted.
►
Tap the Cancel button.
Any changes you have made will not be adopted.
The SETTINGS window is open again.
- 36 -
Changing the Navigation Settings
11
Index
A
E
Address
Indicate ......................................... 10
Edit
Favourites ..................................... 18
Energy................................................. 7
Entering data....................................... 9
B
Block.................................................. 30
C
Calibration ......................................... 25
Change Icon ...................................... 19
Configuration ..................................... 35
Current Position
Save.............................................. 33
D
Data entry............................................ 9
Delete
Favourites ..................................... 19
Routes .......................................... 23
Destination
Address......................................... 10
Direct Access................................ 14
Favourites ..................................... 14
From Map ..................................... 16
Home ............................................ 15
Home Address .............................. 15
Indicate ......................................... 10
Last Destinations .......................... 14
POI................................................ 11
in a City .................................... 12
Nationwide................................ 12
Nearby...................................... 11
Save.............................................. 17
Start Navigation ............................ 16
Store a Voice Command......... 18, 19
Voice Command ........................... 15
Direct Access .................................... 14
Index
F
Favourites
Change Icon ................................. 19
Delete ........................................... 19
Destination.................................... 14
Edit ............................................... 18
Home Address .............................. 18
Indicate ......................................... 14
My Address................................... 18
Rename ........................................ 18
Store a Voice Command ........ 18, 19
G
GPS
Faulty reception ............................ 10
Information.................................... 33
Symbols .......................................... 7
H
Home................................................. 15
Home Address ............................ 15, 18
I
Interim Destination ............................ 30
K
Keyboard............................................. 8
- 37 -
L
R
Last Destinations
Destination.................................... 14
Indicate ......................................... 14
Recalculate Route............................. 35
Rename
Favourites ..................................... 18
Routes .......................................... 22
Route Planning ................................. 20
Route points
Delete ........................................... 21
Indicate ......................................... 21
Order ............................................ 21
Route Profile ............................... 17, 24
Routes
Calculate....................................... 23
Delete ........................................... 23
Load.............................................. 22
Manage......................................... 22
Planning........................................ 20
Rename ........................................ 22
Route points ................................. 21
Save ............................................. 22
Simulation..................................... 23
Start Navigation ............................ 24
Starting Point ................................ 20
M
Map
Destination Search ....................... 30
Navigation..................................... 28
Preview ......................................... 27
Standard ....................................... 26
Menu ................................................... 7
My Address ....................................... 18
N
Navigation
Block ............................................. 30
Interim Destination........................ 30
No GPS reception................... 17, 24
POI on Your Route ....................... 30
Route Profile ........................... 17, 24
Skip Route Point ........................... 30
Start ........................................ 16, 24
O
Options .......................................... 9, 24
P
Phone .................................................. 7
Picture ................................................. 7
POI
Direct Access................................ 14
in a City......................................... 12
Nationwide .................................... 12
Nearby .......................................... 11
POI on Your Route ............................ 30
- 38 -
S
Safety information ............................... 5
Save
Destination.................................... 17
Routes .......................................... 22
Service ................................................ 5
Settings
Calibration .................................... 25
Configuration ................................ 35
Volume ........................................... 6
Show Map ........................................... 6
Simulation
Quit ............................................... 23
Start .............................................. 23
Skip Route Point ............................... 30
Software keyboard .............................. 8
Store a Voice Command ............. 18, 19
Index
T
TMC
Recalculate Route ........................ 35
Show............................................. 33
Symbols .......................................... 8
Tuning Mode ................................. 34
TMC Settings
Recalculate Route ........................ 35
TMC .............................................. 34
Traffic Information......................... 34
Tuning Mode ................................. 34
Index
Trade marks ........................................ 5
Traffic Information
Recalculate Route ........................ 35
Show............................................. 33
Tuning Mode................................. 34
Tuning Mode ..................................... 34
V
Voice Command ............................... 15
Volume ................................................ 6
- 39 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement