www.crestaudio.com
CA™ 12
The Crest Audio CA12 professional power amplifier is designed to achieve unsurpassed sonic performance and long-term reliability— even when operating under extreme stress—in touring or fixed installation applications. Absolute sonic accuracy is the
hallmark of every Crest amplifier. Bass is solid and defined to the limits of audibility, with ample current reserves delivered by
an “over-engineered” power supply and advanced Class H circuitry. Wide-bandwidth output devices assure detailed, transparent high frequency response. And, thanks to Crest’s exclusive IGM circuit, the CA12 will drive 2 ohm loads safely without
compromise in performance.
Construction and Quality Control
The CA12 is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium quality
and proven durability. Each modular subassembly is pre-tested, and the assembled CA12 receives a rigorous “hot room” burn-in
before thorough final checkout on precision test equipment.
CA 12 Features
• Crest’s legendary “overbuilt” power supply
• Toroidal power transformer
• Latest generation of high-speed, wide-bandwidth output devices
• Twin tunnel cooling with back-to-front air flow
• Dual, variable speed DC fans
• Massive, extruded aluminum heat sinks
• Balanced XLR and 1/4-inch (TRS) inputs
• 5-Way binding post outputs or Speakon™ connectors (market dependent)
• Stereo/parallel/bridged mono mode selector switch
• Ground lift switch
• TourClass® protection circuits
• Recessed, stepped attenuators
• Front panel circuit breaker switch
• Modular construction
Rear View,
Binding Post
Version
Designed & manufactured in the USA by:
CAUTION
Crest Audio Inc.
100 Eisenhower Dr.
Paramus, New Jersey 07652 USA
2+
1
3-
A
A
A
+
+
• •
A
AB
+
A
B
A B
A B
+
• •
B
A B
Rear View,
Speakon
Version
Designed & manufactured in the USA by:
Crest Audio Inc.
100 Eisenhower Dr.
Paramus, New Jersey 07652 USA
A
A
A
• •
A
AB
A
B
A B
A B
B
2+
1
3-
NL4FC
+
(not available in
North America)
B
A B
••
B
www.crestaudio.com
CA™ 18
The Crest Audio CA18 professional power amplifier is designed to achieve unsurpassed sonic performance and long-term reliability— even when operating under extreme stress—in touring or fixed installation applications. Absolute sonic accuracy is the
hallmark of every Crest amplifier. Bass is solid and defined to the limits of audibility, with ample current reserves delivered by
an “over-engineered” power supply and advanced Class H circuitry. Wide-bandwidth output devices assure detailed, transparent high frequency response. And, thanks to Crest’s exclusive IGM circuit, the CA18 will drive 2 ohm loads safely without
compromise in performance.
Construction and Quality Control
The CA18 is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium quality
and proven durability. Each modular subassembly is pre-tested, and the assembled CA18 receives a rigorous “hot room” burn-in
before thorough final checkout on precision test equipment.
CA 18 Features
• Crest’s legendary “overbuilt” power supply
• Toroidal power transformer
• Latest generation of high-speed, wide-bandwidth output devices
• Twin tunnel cooling with back-to-front air flow
• Dual, variable speed DC fans
• Massive, extruded aluminum heat sinks
• Balanced XLR and 1/4-inch (TRS) inputs
• 5-Way binding post outputs or Speakon™ connectors (market dependent)
• Stereo/parallel/bridged mono mode selector switch
• Ground lift switch
• TourClass® protection circuits
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit breaker switch
• Modular construction
Rear View,
Binding Post
Version
Designed & manufactured in the USA by:
CAUTION
Crest Audio Inc.
100 Eisenhower Dr.
Paramus, New Jersey 07652 USA
2+
1
3-
A
A
A
+
+
• •
A
AB
+
A
B
A B
A B
+
• •
B
A B
Rear View,
Speakon
Version
Designed & manufactured in the USA by:
Crest Audio Inc.
100 Eisenhower Dr.
Paramus, New Jersey 07652 USA
A
A
A
• •
A
AB
A
B
A B
A B
B
2+
1
3-
NL4FC
+
(not available in
North America)
B
A B
••
B
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
CC™ Series Amplifiers
True to the Crest Audio heritage, CC™ Series
amplifiers are based on the time-tested,
proven design of the flagship Pro 200™ Series. The highly efficient linear power supply provides stable, high-output power for
a wide range of demanding musical applications. Systems designed specifically for
house mains, high-SPL foldback monitoring, subwoofers, mobile DJ work and contemporary worship will find the CC Series to
be the perfect choice. Built under renowned
Crest Audio engineering standards and forward-thinking manufacturing processes,
CC Series amplifiers are cost-effective solutions to today’s most demanding sound
reinforcement applications.
t5PSPJEBMQPXFSUSBOTGPSNFS
t%VBMWBSJBCMFTQFFEGBOTPO$$$$
BOE$$TJOHMFGBOPO$$
t#BMBODFE9-3JOQVUT
t4QFBLPO¥BOEXBZCJOEJOHQPTUTQFBLFS
PVUQVUT
t.PEFTFMFDUPSTXJUDIGPSTUFSFPQBSBMMFM
BOECSJEHFENPOPPQFSBUJPOT
t*OQVUTFOTJUJWJUZTFMFDUJPO
t3FDFTTFETUFQQFEBUUFOVBUPST
t'SPOUQBOFMDJSDVJUCSFBLFSTXJUDI
t5PVS$MBTT¥QSPUFDUJPODJSDVJUT
These robust amps boast
more power devices (16
per channel) than any
competitive amplifier, plus a
switched-rail Class-H output
stage and triple-compound
design to provide low
distortion and excellent
thermal stability.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
CC™ Series Amplifiers
Stereo Power
8 Ω Stereo
4 Ω Stereo
2 Ω Stereo
Bridged Mono
4 Ω Mono
Max Output Voltage RMS
CC 5500
CC 4000
CC 2800
CC 1800
1,150 W
1,800 W
2,750 W
800 W
1,350 W
2,000 W
595 W
965 W
1,400 W
450 W
700 W
900 W
5,500 W
115 V
4,000 W
93 V
2,800 W
82 V
1,850 W
73 V
8Ω, 4Ω Stereo and 8Ω Bridged Mono power ratings @ 1kHz, <.05% THD+N both channels driven.
2Ω Stereo and 4Ω Bridged Mono power rating @ 1 kHz, < .1% THD+N
Class
Switched Rail, H
Switched Rail, H
Switched Rail, H
Modulated Rail, H
Unpacked Weight
47 lbs (21.32 kg)
43.3 lbs (19.64 kg)
39.8 lbs (18.05 kg)
32.6 lbs (14.8 kg)
2
2
2
2
Rack Space
www.crestaudio.com
CC™ 1800 Professional Amplifier
Crest Audio CC Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed,
transparent high frequency response. And, thanks to Crest’s exclusive IGM™ circuit, the CC Series will drive 2Ω loads safely
without compromising performance.
Construction and Quality Control
Designed for years of reliable, flawless operation under rigorous use. The CC Series amplifiers offer the sonic superiority and unsurpassed reliability for which Crest Audio is famous, while remaining surprisingly compact. Advanced technology and extensive
protection circuitry allow operation with greater efficiency into difficult loads and power conditions. Each assembly is pre-tested,
and the assembled CC receives a rigorous “hot room” burn-in before thorough final checkout on precision test equipment.
CC 1800 Features
• Toroidal power transformer
• Dual, variable speed fans on CC 2800, CC 4000, and CC 5500 single fan on model CC 1800
• Balanced XLR inputs
• Speakon® and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit-breaker switch
• Five year warranty*
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM™ (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This
allows safe operation into nominal 2Ω speaker loads.
AUTORAMP™ gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt
turn-on level.
Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/
off; transient sub-sonic input.
www.crestaudio.com
CC™ 2800 Professional Amplifier
Crest Audio CC Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed,
transparent high frequency response. And, thanks to Crest’s exclusive IGM™ circuit, the CC Series will drive 2Ω loads safely
without compromising performance.
Construction and Quality Control
Designed for years of reliable, flawless operation under rigorous use. The CC Series amplifiers offer the sonic superiority and unsurpassed reliability for which Crest Audio is famous, while remaining surprisingly compact. Advanced technology and extensive
protection circuitry allow operation with greater efficiency into difficult loads and power conditions. Each assembly is pre-tested,
and the assembled CC receives a rigorous “hot room” burn-in before thorough final checkout on precision test equipment.
CC 2800 Features
• Toroidal power transformer
• Dual, variable speed fans on CC 2800, CC 4000, and CC 5500 single fan on model CC 1800
• Balanced XLR inputs
• Speakon® and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit-breaker switch
• Five year warranty*
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM™ (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This
allows safe operation into nominal 2Ω speaker loads.
AUTORAMP™ gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt
turn-on level.
Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/
off; transient sub-sonic input.
www.crestaudio.com
CC™ 4000 Professional Amplifier
Crest Audio CC Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed,
transparent high frequency response. And, thanks to Crest’s exclusive IGM™ circuit, the CC Series will drive 2Ω loads safely
without compromising performance.
Construction and Quality Control
Designed for years of reliable, flawless operation under rigorous use. The CC Series amplifiers offer the sonic superiority and unsurpassed reliability for which Crest Audio is famous, while remaining surprisingly compact. Advanced technology and extensive
protection circuitry allow operation with greater efficiency into difficult loads and power conditions. Each assembly is pre-tested,
and the assembled CC receives a rigorous “hot room” burn-in before thorough final checkout on precision test equipment.
CC 4000 Features
• Toroidal power transformer
• Dual, variable speed fans on CC 2800, CC 4000, and CC 5500 single fan on model CC 1800
• Balanced XLR inputs
• Speakon® and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit-breaker switch
• Five year warranty*
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM™ (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This
allows safe operation into nominal 2Ω speaker loads.
AUTORAMP™ gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt
turn-on level.
Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/
off; transient sub-sonic input.
www.crestaudio.com
CC™ 5500 Professional Amplifier
Crest Audio CC Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed,
transparent high frequency response. And, thanks to Crest’s exclusive IGM™ circuit, the CC Series will drive 2Ω loads safely
without compromising performance.
Construction and Quality Control
Designed for years of reliable, flawless operation under rigorous use. The CC Series amplifiers offer the sonic superiority and unsurpassed reliability for which Crest Audio is famous, while remaining surprisingly compact. Advanced technology and extensive
protection circuitry allow operation with greater efficiency into difficult loads and power conditions. Each assembly is pre-tested,
and the assembled CC receives a rigorous “hot room” burn-in before thorough final checkout on precision test equipment.
CC 5500 Features
• Toroidal power transformer
• Dual, variable speed fans on CC 2800, CC 4000, and CC 5500 single fan on model CC 1800
• Balanced XLR inputs
• Speakon® and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit-breaker switch
• Five year warranty*
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM™ (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This
allows safe operation into nominal 2Ω speaker loads.
AUTORAMP™ gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt
turn-on level.
Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/
off; transient sub-sonic input.
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
Ci™ Series Amplifiers
New to the Crest Audio family, the Ci™ Series brings high-performance audio to the
systems integration market. The Ci Series
features an efficient, air-cooled power supply in a compact, 2RU chassis, with support
for constant-voltage outputs for installations that require a wide variety of loads
with efficient rack layouts. Support for optional monitoring and control make the
Ci Series a perfect choice for applications
where paging, fire-alarm or priority control
is required. Additional support for NexSys®
control modules extends the Ci Series into
advanced systems where integrated control, audio transport and signal processing
is required at the amplifier.
t'PVSBOEFJHIUDIBOOFMWFSTJPOTBWBJMBCMF
t*OEJWJEVBMDIBOOFMTBSFTFMFDUBCMFBTMPX
JNQFEBODFPSWPMU
t'SPOUBOESFBSQBOFMJOEJDBUPSTGPS
BNQMJöFSTUBUVT
t'VMMBNQMJöFSDPOUSPMBOENPOJUPSJOH
WJB/FY4ZT¥TPGUXBSFPS1FBWFZ¥
.FEJB.BUSJY¥QSPEVDUBOEEJHJUBMBVEJP
EJTUSJCVUJPO
t7BSJBCMFTQFFEGBO
t4FRVFOUJBMUVSOPOTUBOEBSE
t&VSPTUZMFJOQVUDPOOFDUPST
t#BSSJFSTUSJQPVUQVUDPOOFDUPST
t0OFDPOUSPMMFEWPMUBHFJOQVUQFSDIBOOFM
TUBOEBSE
t0OFGBVMUSFMBZQFSDIBOOFMTUBOEBSE
tBOEWPMUPQFSBUJPOTVQQPSUFEXJUI
FYUFSOBMBDDFTTPSJFT
t&/BOE"/4*DPNQMJBOUXJUI
PQUJPOBMBDDFTTPSJFT
t5PVS$MBTT¥QSPUFDUJPO
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
Ci™ Series Amplifiers
Ci amplifiers are designed to drive low-impedance or 70-volt
speaker loads without bridging between channels, and can
accommodate modules that facilitate load monitoring, digital
audio delivery and Crest Audio’s NexSys® networking.
Dual Power
70V
8Ω
4Ω
Bridged Mono Power
140V
16 Ω
8Ω
4Ω
Class
Rack Space
Weight
Ci 20x8
Ci 30x4
200 W x 8
200 W x 8
150 W x 8
300 W x 4
300 W x 4
200 W x 4
400 W x 4
400 W x 4
300 W x 4
600 W x 2
600 W x 2
400 W x 2
D
D
2
2
36.5 lbs. (16.65 kg)
34 lbs. (14.83 kg)
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
CLh™ Series Amplifiers
CLh 5000 CLh 5000C CLh 2500 CLh 2500C
The new Crest Audio CLh™ Series power
amplifiers set a new standard for performance and efficiency for the contracting
and installation market. Led by the CLh
5000 and CLh 2500 models, CLh amplifiers
feature an ultra-high efficiency amplifier
output circuit that reduces weight while increasing output power, reliability and thermal efficiency.
The Crest Audio CLh 5000 and CLh 2500
are ultra-high efficiency, servo-controlled,
class-D power amplifiers that deliver high
power through two channels to balanced
outputs for the ultimate in common-mode
noise cancellation. The CLh 5000 produces
2,500 watts per channel continuous at 70.7
volts, while the CLh 2500 provides 1,250
watts per channel continuous at 70.7 volts
(100V export models are the CLh 5000C
and CLh 2500C). The state-of-the-art CLh
series amplifiers deliver this power from a
stunning 13 lb. package.
The CLh Series includes Crest Audio’s exclusive ACL™ (Active Clip Limiting), which
automatically reduces gain at the onset of
clipping to prevent amplifier and load damage; over-current protection; DC voltage;
channel active and temperature warning.
Additional features include a lightweight
switch-mode power supply, remote turnon, sequential turn-on and a switchable,
built-in low-cut filter.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
CKd™ Series Amplifiers
CKd 1208 CKd 1204 CKd 608 CKd 604
Decades of proven performance, reliability and intelligence converge in the Crest
Audio CKd™ Series, combining the legendary overbuilt power supply design made
famous by the Crest Audio Pro 200™ with
NexSys® networking functionality and an
ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit which reduces
weight while increasing output power, reliability and thermal efficiency.
The CKd Series offers four multi-channel
models to meet the needs of demanding
audio installations. The CKd 1208 and CKd
1204 provide 1,250 watts per channel in
eight and four channels, respectively, while
the CKd 608 and CKd 604 provide 625 watts
per channel in eight and four channels.
Each amplifier channel will operate to rated
power in direct 70-volt, 100-volt, 8-ohm or
4-ohm modes, configurable per channel.
CKd amplifiers are networkable through
the new Crest Audio Nx Dante-8™ NexSys
control module to the Crest Audio NexSys
5 and Peavey® MediaMatrix® NWare™ software programs for advanced control and
audio routing. The Nx Dante-8 module fits
into the rear bay of CKd Series power amps
and supports all NexSys functions, DSP
functions and Dante digital audio I/O via 1
Gigabit Ethernet connection.
A Control Voltage input is included on each
channel to allow external gain control, while
the Fault output on each channel allows
the CKd power amps to be wired to other
monitoring systems. In addition, users can
conserve energy by disabling channels that
are not in use.
The CKd Series includes Crest Audio’s exclusive ACL™ (Active Clip Limiting), which
automatically reduces gain at the onset of
clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
CKi™ Series Amplifiers
CKi™ Series amplifiers represent a unique
blend of proven technology, advanced
features, reliability and superior audio
performance. Designed specifically for
large-scale systems integration, CKi Series
amplifiers are the heart of an advanced
network, merging audio, control, monitoring and maintenance into a single amplifier.
CKi Series amplifiers provide famous Crest
Audio performance in a commercial package with advanced features and multiple
expansion options. Integral module bays
support optional network modules that
transform these individual amplifiers into
network nodes designed for complete integration. Additional support for the Nx™ Series modules and integration with Peavey®
MediaMatrix® DSP processing systems provide powerful, turnkey systems. CKi Series
amplifiers simplify the process of terminating output loads with models for directcoupled and constant-voltage loads.
t5ISFFQJO&VSPTUZMFJOQVUT
t5FSNJOBMTUSJQTQFBLFSPVUQVUT
t.PEFTFMFDUPSTXJUDIGPSTUFSFPQBSBMMFM
CSJEHFENPOPPQFSBUJPO
t*OQVUTFOTJUJWJUZTFMFDUJPO
t'SPOUQBOFMDJSDVJUCSFBLFSTXJUDI
tWPMUTUFSFP74FSJFT
t-FHFOEBSZSPCVTUQPXFSTVQQMZ
t3FBSNPVOUFEBUUFOVBUPSTXJUISFNPWBCMF
LOPCT
t'SPOUUPTJEFDPPMJOH
t4JHOBMQSFTFOUBDUJWFQSPUFDUBOE"$-™
-&%TPOGSPOUBOESFBSPGBNQMJöFS
t1PXFS4BWFBOETFRVFOUJBMUVSOPò
IBSEXJSFE450TUBOEBSEPOBMMNPEFMT
t'BVMU*0GPSDPOOFDUJPOUPPUIFS
NPOJUPSJOHTZTUFNT
t5PVS$MBTT¥1SPUFDUJPO
Module bays on the rear
of the CKi amplifiers allow
users to install a wide
variety of signal processing
modules, which can then
be placed under computer
control.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
CKi™ Series Amplifiers
CKi S AMPS CKi 1600S
Stereo Power
8 Ω Stereo
4 Ω Stereo
2 Ω Stereo
Bridged Mono
8 Ω Mono
4 Ω Mono
Output Voltage RMS
Maximum
Class
Rack Space
Weight
CKi 1200S
CKi 800-2S
CKi 800S
CKi 400S
CKi 200S
CKi 100S
815 W
1130 W
1440 W
630 W
940 W
1130 W
420 W
670 W
870 W
440 W
670 W
N/A
255 W
320 W
N/A
120 W
175 W
N/A
60 W
90 W
N/A
2260 W
2880 W
1880 W
2260 W
880 W
1740 W
880 W
N/A
510 W
N/A
350 W
N/A
180 W
N/A
90 V
78 V
64 V
64 V
56 V
127 V
110 V
90 V
90 V
64 V
Power ratings are Watts per channel, both channels driven, 1kHz, 0.02% THD+N
32 V
45 V
22 V
31 V
H
H
AB
AB
4
70.7 lbs. (32 kg)
H
AB
4
3
3
2
2
2
70.7 lbs. (32 kg)
70.7 lbs. (32 kg)
50.5 lbs. (22.8 kg)
30.4 lbs. (13.8 kg)
29.4 lbs. (13.3 kg)
6.6 lbs. (12 kg)
CKi 1600V
CKi 800V
CKi 400V
CKi 200V
CKi 100V
1200 W
800 W
400 W
200 W
100 W
50 W
2400 W
1600 W
800 W
400 W
200 W
100 W
CKi V AMPS CKi 2400V
Stereo Power
70.7 Volts
Bridged
140 Volts
Output Voltage RMS
Maximum
AB
92 V
92 V
92 V
92 V
92 V
140 V
140 V
140 V
140 V
140 V
70.0 Volt power rating is Watts per channel, both channels driven, 20Hz - 20kHz, 0.02% THD+N
*Bridged mono operation
92 V
140 V
Class
H
H
AB
AB
AB
AB
Rack Space
4
4
3
2
2
2
70.7 lbs. (32 kg)
70.7 lbs. (32 kg)
50.2 lbs. (22.8 kg)
30.7 lbs. (13.9 kg)
27.2 lbs. (12.4 kg)
5.3 lbs. (11.5 kg)
CKi 500X
CKi 300X
CKi 150X
400 W
400 W
400 W
250 W
250 W
250 W
150 W
150 W
150 W
75 W
75 W
75 W
800 W
500 W
300 W
150 W
Weight
CKi X AMPS CKi 800X
Stereo Power
50 Volts*
70 Volts
100 Volts
Bridged
200 Volts
100 Volts*
Output Voltage RMS
Maximum
Class
Rack Space
Weight
105 V
105 V
105 V
105 V
200 V
200 V
200 V
200 V
70.0 Volt power rating is Watts per channel, both channels driven, 20Hz - 20kHz, 0.02% THD+N
*Bridged mono operation
AB
AB
AB
AB
3
3
3
3
57 lbs. (25.9 kg)
35 lbs. (15.9 kg)
35 lbs. (15.9 kg)
32 lbs. (14.6 kg)
www.crestaudio.com
CKi™ 100S Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 100S Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 200S Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 200S Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 400S Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 400S Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 800-2S Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 800-2S Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 800S Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 800S Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 1200S Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 1200S Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 1600S Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 1600S Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 100V Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 100V Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 200V Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 200V Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 400V Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 400V Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 800V Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 800V Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 800V Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 800V Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 1600V Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 1600V Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
www.crestaudio.com
CKi™ 2400V Professional Installation Amplifier
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability
to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to
perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier,
the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the
largest theme park or stadium.
Construction and Quality Control
The CKi Series is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled CKi amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
CKi 2400V Features
• Legendary overbuilt power supply
• Rear-mounted attenuators with removable knobs
• Euro-style connection block, input and output
• Front panel labeling area
• Signal present, active, protect and ACL. LEDs (on front and rear of amplifier)
• PowerSave and sequential turn off (hardwired STO standard on all models)
• Fault I/O for connection to other monitoring systems
• Optional input isolation transformers available
• Five-year warranty
PowerSave
All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a
minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of
signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
Crest Audio Industrial Amplifiers
Complex commercial audio installations often require hundreds of loudspeaker zones
with a variety of loudspeaker loads. Crest
Audio industrial amplifiers provide efficient,
cost-effective solutions for a wide variety of
multi-zone installations with strong, reliable
workhorse design and construction.
CM™ Series
The CM Series breaks new ground by providing Crest Audio sonic performance in
powerful, multi-channel configurations.
The perfect choice for multi-zone systems,
the CM Series provides up to 220 watts in
four- and eight-channel 2RU packages.
Support for multiple loads is provided with
configurable channels to allow termination
of direct-coupled or constant-voltage loudspeaker loads. Front-panel signal monitoring, rear-panel terminations, rear-panel
attenuators and loudspeaker protection
circuitry ensure hassle-free operation for a
wide variety of applications.
t.VMUJMPBEBSDIJUFDUVSFBMMPXTMPX
JNQFEBODFPS7PQFSBUJPOBUUIF
TBNFQPXFSMFWFMTXJUIPVUTFMFDUTXJUDI
7PS7PVUQVUPQFSBUJPOXJUI$.9
BDDFTTPSZ
t-PXNBJOTDVSSFOUESBX
t$PTUFòFDUJWFGPSNBOZNVMUJDIBOOFM
BQQMJDBUJPOT
t'MFYJCMFDPOöHVSBUJPO
t&YDFMMFOUTPVOERVBMJUZ
t&BTZTFUVQ
t5PVS$MBTT¥QSPUFDUJPODJSDVJUT
PA-150™
The Crest Audio PA-150 is a time-tested, efficient and versatile power amplifier. With
75 watts in a two-channel, 1RU package,
the PA-150 is a great addition to many systems. With support for direct-coupled and
constant-voltage loads*, the PA-150 is often
used as a supplement for larger installations
where additional zones are required. In
smaller applications, the PA-150’s small size
and integral convection cooling make it the
perfect choice when high-quality audio is
required and space is at a premium.
*Optional accessory required for 100-volt constant-voltage operation.
t-PBETFMFDUPSTXJUDI
tXBUUT3.4DIBOOFMPSPINT
t#SJEHFENPEFPQFSBUJPOXBUUT
PINT
t&MFDUSPOJDBMMZCBMBODFEJOQVUT
t4JOHMFSBDLTQBDF
t$POWFDUJPODPPMFE
t5PVS$MBTT¥QSPUFDUJPODJSDVJUT
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
Crest Audio Industrial Amplifiers
CM™ Series amps are at home wherever industrial-strength power is required, from paging
systems in venues like airports and schools to house systems in bars, clubs, restaurants,
video conferencing systems, hotels, motels, retail stores and more.
$.™4&3*&4$.$.108&3".1-*'*&34
Output Power
4Ω
8Ω
70V
Class
Unpacked Weight
Rack Space
CM 2204
CM 2208
150 W x 4
220 W x 4
220 W x 4
150 W x 8
220 W x 8
220 W x 8
D
D
34 lbs. (14.83 kg)
36.5 lbs. (16.65 kg)
2
2
1"™%6"-ű$)"//&-108&3".1-*'*&3
PA 150
Output Power
4Ω
Class
Unpacked Weight
Rack Space
75 W x 2
A/B
16.5 lbs. (7.5 kg)
1
www.crestaudio.com
CM™ 2204 Professional Installation Amplifier
CM™ Series power amplifiers feature a unique amplification architecture providing a host of user benefits
including simplified operation and use in multiple applications, as well as unsurpassed sonic quality and
flexible power.
CM Series products comprise four-channel (CM 2204-AB/DV) and eightchannel (CM 2208-AB/DV) units
(channels are independent). A host of applications benefit from the use of multiple channel amplification,
including bars, clubs and restaurants; video conferencing systems; hotels and motels; industrial installations; and retail stores, among others. One amplifier for multiple applications provides a cost-effective
solution, expansion opportunities and unparalleled flexibility.
Construction and Quality Control
The CM Series is built exclusively in Crest’s own USA manufacturing facility, with internal components
selected for premium quality and proven durability. Each modular subassembly is pre-tested, and the assembled CM amplifier receives a rigorous “hot room” burn-in before thorough final checkout on precision
test equipment.
CM 2204 Features
• 4- or 8-channel power amp systems—220 Watts RMS per channel (70 Volts)
• Low-Z (4 or 8 Ohms) or 70 Volt output
• Input connectors: balanced three-pin Phoenix
• Output connectors: two-pin Phoenix
• Full range of protection circuits including ACL, IGM and AUTORAMP
• 16-gauge steel chassis
• 2U rack space height
• Protection Circuits / Safety including: ACL™, IGM™, and Autoramp™
• Front-to-side cooling
• Front-panel LED indicators per channel: signal, clip, and protect
• Input and output mating connectors are included
www.crestaudio.com
CM™ 2208 Professional Installation Amplifier
CM™ Series power amplifiers feature a unique amplification architecture providing a host of user benefits
including simplified operation and use in multiple applications, as well as unsurpassed sonic quality and
flexible power.
CM Series products comprise four-channel (CM 2204-AB/DV) and eightchannel (CM 2208-AB/DV) units
(channels are independent). A host of applications benefit from the use of multiple channel amplification,
including bars, clubs and restaurants; video conferencing systems; hotels and motels; industrial installations; and retail stores, among others. One amplifier for multiple applications provides a cost-effective
solution, expansion opportunities and unparalleled flexibility.
Construction and Quality Control
The CM Series is built exclusively in Crest’s own USA manufacturing facility, with internal components
selected for premium quality and proven durability. Each modular subassembly is pre-tested, and the assembled CM amplifier receives a rigorous “hot room” burn-in before thorough final checkout on precision
test equipment.
CM 2208 Features
• 4- or 8-channel power amp systems—220 Watts RMS per channel (70 Volts)
• Low-Z (4 or 8 Ohms) or 70 Volt output
• Input connectors: balanced three-pin Phoenix
• Output connectors: two-pin Phoenix
• Full range of protection circuits including ACL, IGM and AUTORAMP
• 16-gauge steel chassis
• 2U rack space height
• Protection Circuits / Safety including: ACL™, IGM™, and Autoramp™
• Front-to-side cooling
• Front-panel LED indicators per channel: signal, clip, and protect
• Input and output mating connectors are included
www.crestaudio.com
PA™ 150 Professional Amplifier
The PA 150 is a rugged, medium-power amplifier with features that make it stand alone in the industry. It’s a rack-mountable
unit which occupies only one rack space, and yet packs a 75 W RMS per channel punch into 4, 8, or 16 Ohms. It’s selectable;
a feature seldom found on the typical solid state amp. In bridge mode, this unit delivers 150 W RMS into 8, 16, and 32 Ohms.
You might ask why 32 Ohms; that’s the load impedance for a 150 Watt, 70 Volt distribution system.There’s no fan in this unit
to make noise.Adequate cooling is provided by two massive heat sinks. Each channel is protected from excessive operating
temperatures with a thermal/fault system that is automatic, and only activates under extreme conditions.
Construction and Quality Control
The PA 150 has an exclusive SPS compression system that senses conditions which might overload the amplifier and activates
compression circuitry when clipping is imminent.This technique utilizes every precious Watt available to power transformer with
three different voltage taps.The rear panel three-position selector switch then gives this amp the impedance selection capability by
changing the internal “rail” operating voltages.Toroidal power transformers offer very high efficient operation (cool), have very
low magnetic fields (hum), and are relatively small in size (weight).
The PA 150 is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium quality and proven durability. Each modular subassembly is pre-tested, and the assembled PA 150 amplifier receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
PA 150 Features
• 19” rack-mountable
• one rack space
• 75 W RMS per channel
• 150 W RMS bridge mode
• selectable 4, 8, or 16 Ohms
• SPS™ compression on each channel
• electronically balanced inputs
• convection cooled
• heavy-duty rocker power switch
• LED power indicator
• SPS activation LED on each channel
• barrier strip inputs
• barrier strip outputs
• detented 1 dB level controls
• stereo/bridge mode switch
• impedance selector
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
CPX™ Series Amplifiers
With the four rugged, ultra-affordable power amplifier designs in the CPX™ Series, Crest
Audio engineers kept the frills where they
count—on the inside. Over-built and overengineered for added reliability and efficiency, CPX amps feature built-in subwoofer
crossovers, low-cut filters, Speakon® output
connectors and an exclusive V-shaped Turbo
Cooling™* airway that progressively narrows
to concentrate air flow for maximum heat
transfer from the output devices mounted
on each side. Crest Audio’s exclusive Gain
Comparator Limiting™ (GCL) circuitry senses the onset of clipping and dynamically
reduces the gain for a few milliseconds,
allowing users to drive CPX amps to their
maximum without hearing any distortion.
$19
t$SFTU"VEJPTFYDMVTJWF(BJO$PNQBSBUPS
-JNJUJOH($-
TZTUFNGPSNBYJNVN
PVUQVUXJUIPVUBVEJCMFEJTUPSUJPO
t%FNBOETFOTJUJWFWBSJBCMFTQFFEGBOT
t%FUFOUFEHBJODPOUSPMT
t1PXFS($-BOETJHOBMQSFTFOU-&%TPOFBDI
DIBOOFM
t#VJMUJO)[E#PDUBWFTVCXPPGFS
DSPTTPWFSXJUIwPVUQVU
t$VSSFOUJOSVTIMJNJUFS
t0WFSIFBUTIPSUDJSDVJUDMJQMJNJUJOHGBVMUZ
MPBEBOE%$DJSDVJUTQSPUFDUZPVSWBMVBCMF
TPVOESFJOGPSDFNFOUTQFBLFSTBOEUIF$19
BNQMJöFS
t#BSSJFSTUSJQCBMBODFE9-3BOEw534
JOQVUTXJUITJHOBMQBTTUISPVHI
t.BTTJWFUPSPJEBMUSBOTGPSNFSBOETUPSBHF
DBQBDJUPST
$19$19$19
t(BJO$PNQBSBUPS-JNJUJOH($-
TZTUFN
t3FBSQBOFM($-EFGFBUTXJUDI
t#VJMUJODSPTTPWFS
t)[E#QFSPDUBWF-JOLXJU[3JMFZ
öMUFSUVOFEGPSTVCT
t*OEJWJEVBMJOPVUPGUIFDSPTTPWFS
twEBJTZDIBJOPVUQVUT
tE#QFSPDUBWFBU)[EFGFBUBCMFMPX
DVUöMUFS
t*OQVUDPOOFDUPSTCBSSJFSTUSJQGFNBMF9-3
BOEw
t4QFBLPO¥PVUQVUTGPS$I"BOE#BOE
CSJEHFENPOP
t#JOEJOHQPTUPVUQVUT
t.PEFTFMFDUPSTXJUDIGPSTUFSFPBOE
CSJEHFENPOPPQFSBUJPO
t5XPTQFFE%$GBO
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
CPX™ Series Amplifiers
The CPX™ is an affordable line of amplifiers
geared toward the MI and DJ markets.
Industry-standard connectors and features
make the CPX essential for mobile sound
systems, project studios and musicians.
CPX 3800
CPX 2600
CPX 1500
CPX 900
Stereo Power
8 Ω Stereo
4 Ω Stereo
800 W
1,300 W
540 W
900 W
300 W
500 W
180 W
300 W
Bridged Mono
8 Ω Mono
2,650 W
1,800 W
1,000 W
600 W
Class H
Class H
Class AB
Class AB
43 lbs. (19.5 kg)
49 lbs. (23.3 kg)
45 lbs. (20.5 kg)
40 lbs. (18.2 kg)
2
2
2
2
Class
Unpacked Weight
Rack Space
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
Pro 200™ Series Amplifiers
Famous for superior sonic performance,
reliable operation and long service life, the
Professional Series firmly established Crest
Audio in the world of professional touring
sound reinforcement amplification. Today,
the Crest Audio Pro 200™ Series extends
that tradition with new lightweight, costeffective amplifiers designed for touring,
fixed sound reinforcement and advanced
audio/visual systems. New advances in design, technology and manufacturing, combined with new features and a lightweight
rugged chassis, make the Pro 200 Series the
perfect choice in high-performance power
amplifiers.
t-BUFTUHFOFSBUJPOIJHITQFFEXJEF
CBOEXJEUIPVUQVUEFWJDFT
t%VBMWBSJBCMFTQFFEGBOT
t#BMBODFE/FVUSJL¥$PNCJJOQVUT
t4QFBLPO¥BOEXBZCJOEJOHQPTUTQFBLFS
PVUQVUT
t.PEFTFMFDUPSTXJUDIGPSTUFSFPQBSBMMFM
CSJEHFENPOPPQFSBUJPO
t*OQVUTFOTJUJWJUZTFMFDUJPO
t3FDFTTFETUFQQFEBUUFOVBUPST
t'SPOUQBOFMDJSDVJUCSFBLFSTXJUDI
DPNCJOBUJPO
t5PVS$MBTT¥1SPUFDUJPO
Designed with touring
sound professionals in mind,
the Crest Pro 200 Series
power amplifiers faithfully
produce audio at high
power with low distortion
in a lightweight, economical
package.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
PRO 200™ Series Amplifiers
1SP4FSJFTBNQMJöFST
QBDLNPSFQPXFSPOUIFUSVDL
Pro 9200
Pro 8200
Pro 7200
Pro 5200
Stereo Power
8 Ω Stereo
4 Ω Stereo
2 Ω Stereo
1,300 W
2,200 W
3,250 W
825 W
1,450 W
2,250 W
590 W
1,000 W
1,650 W
290 W
525 W
850 W
Bridged Mono
8 Ω Mono
4 Ω Mono
Output Voltage RMS
4,400 W
6,500 W
113 V
2,900 W
4,500 W
90 V
2,000 W
3,300 W
75 V
1,050 W
1,700 W
52 V
8Ω, 4Ω Stereo and 8Ω Bridged Mono Power ratings @ 1kHz, <.05% THD+N
both channels driven. 2Ω Stereo and 4Ω Bridged Mono Power rating @ 1 kHz, < .1% THD+N
Class
Unpacked Weight
Rack Space
H
H
H
A/B
21.8 lbs. (10 kg)
21.8 lbs. (10 kg)
21.8 lbs. (10 kg)
25 lbs. (11.34 kg)
2
2
2
2
www.crestaudio.com
Pro 5200 Professional Amplifier
Crest Audio CC Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed,
transparent high frequency response. And, thanks to Crest’s exclusive IGM™ circuit, the Pro 200 Series will drive 2Ω loads
safely without compromising performance.
Construction and Quality Control
The Pro 5200 is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled Pro 5200 receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
Pro 5200 Features
• Dramatically reduced net weight
• Latest generation of high speed, wide-bandwidth output devices
• Dual, variable speed fans
• Balanced XLR inputs
• Speakon® and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit - breaker switch
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM™ (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This
allows safe operation into nominal 2Ω speaker loads.
AUTORAMP™ gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt
turn-on level.
Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/
off; transient sub-sonic input.
www.crestaudio.com
Pro 7200 Professional Amplifier
Crest Audio Pro 200 Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed,
transparent high frequency response. And, thanks to Crest’s exclusive IGM™ circuit, the Pro 200 Series will drive 2Ω loads
safely without compromising performance.
Construction and Quality Control
The Pro 7200 is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled Pro 9200 receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
Pro 7200 Features
• Dramatically reduced net weight
• Latest generation of high speed, wide-bandwidth output devices
• Dual, variable speed fans
• Balanced XLR inputs
• Speakon® and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit - breaker switch
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM™ (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This
allows safe operation into nominal 2Ω speaker loads.
AUTORAMP™ gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt
turn-on level.
Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/
off; transient sub-sonic input.
www.crestaudio.com
Pro 8200 Professional Amplifier
Crest Audio Pro 200 Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed,
transparent high frequency response. And, thanks to Crest’s exclusive IGM™ circuit, the Pro 200 Series will drive 2Ω loads
safely without compromising performance.
Construction and Quality Control
The Pro 8200 is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled Pro 8200 receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
Pro 8200 Features
• Dramatically reduced net weight
• Latest generation of high speed, wide-bandwidth output devices
• Dual, variable speed fans
• Balanced XLR inputs
• Speakon® and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit - breaker switch
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM™ (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This
allows safe operation into nominal 2Ω speaker loads.
AUTORAMP™ gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt
turn-on level.
Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/
off; transient sub-sonic input.
www.crestaudio.com
Pro 9200 Professional Amplifier
Crest Audio Pro 200 Series amplifiers are designed to achieve unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications. Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample current reserves. Wide-bandwidth output devices ensure detailed,
transparent high frequency response. And, thanks to Crest’s exclusive IGM™ circuit, the Pro 200 Series will drive 2Ω loads
safely without compromising performance.
Construction and Quality Control
The Pro 9200 is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is pre-tested, and the assembled Pro 9200 receives a rigorous “hot
room” burn-in before thorough final checkout on precision test equipment.
Pro 9200 Features
• Dramatically reduced net weight
• Latest generation of high speed, wide-bandwidth output devices
• Dual, variable speed fans
• Balanced XLR inputs
• Speakon® and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit - breaker switch
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM™ (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This
allows safe operation into nominal 2Ω speaker loads.
AUTORAMP™ gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt
turn-on level.
Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/
off; transient sub-sonic input.
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
Pro-LITE™ Series Amplifiers
Featuring an efficient design and built on
the solid, three-decade legacy of Crest Audio amplifiers, Pro-LITE™ Series power amps
provide high power and rock-solid performance in an ultra-efficient lightweight
package for all professional audio applications. The Crest Audio Pro-LITE amplifiers
are designed with an advanced, high-speed
class D design with a switch-mode power
supply that reduces weight while increasing reliability, thermal efficiency and output power in parallel, stereo and bridged
modes. The Pro-LITE Series includes the 7.5,
5.0, 3.0 and 2.0 models with and without
DSP. The Pro-LITE 2.0 which is now shipping, delivers 540 watts per channel at 4
ohms stereo (up to 2,000 watts bridged @
4 ohms) at just 11.6 lbs.
1SP-*5&™
tXBUUTBUPINCSJEHFE5)%
tXBUUTQFSDIBOOFMBUPINT5)%
tXBUUTQFSDIBOOFMBUPINT5)%
tXBUUTQFSDIBOOFMBUPINT5)%
t3FWPMVUJPOBSZDMBTT%UPQPMPHZ
t"VUPNBUJD$MJQ-JNJUJOH"$-™
t5XPDIBOOFMJOEFQFOEFOUGPVSUIPSEFS
DSPTTPWFST
t1BSBMMFM#SJEHF4UFSFPNPEFTXJUDI
t/FVUSJL¥$PNCJ9-3wJOQVUT
t9-3UISVDPOOFDUPST
t4QFBLPO¥PVUQVUDPOOFDUPST
t-JHIUXFJHIU‰MFTTUIBOMCT
1SP-*5&™
tXBUUTBUPINCSJEHFE5)%
tXBUUTQFSDIBOOFMBUPINT5)%
tXBUUTQFSDIBOOFMBUPINT5)%
tXBUUTQFSDIBOOFMBUPINT5)%
t3FWPMVUJPOBSZDMBTT%UPQPMPHZ
t"VUPNBUJD$MJQ-JNJUJOH"$-
t5XPDIBOOFMJOEFQFOEFOUGPVSUIPSEFS
DSPTTPWFST
t1BSBMMFM#SJEHF4UFSFPNPEFTXJUDI
t/FVUSJL¥$PNCJ9-3wJOQVUT
t9-3UISVDPOOFDUPST
t4QFBLPO¥PVUQVUDPOOFDUPST
t-JHIUXFJHIU‰MFTTUIBOMCT
%41.PEFMTJODMVEF
0OCPBSE%JHJUBM4JHOBM1SPDFTTJOHUIBUQSPWJEFT
t%FMBZTNTQFSDIBOOFM
t"EKVTUBCMF$SPTTPWFS
t"EKVTUBCMF-JNJUFS
t1BSBNFUSJD&2
t)JHI'SFRVFODZ%SJWFS&2
t8"7&4¥.BYY#BTT¥#BTT&YUFOTJPO5FDIOPMPHZ
t'PVSVTFSQSFTFUTUPSBHFSFHJTUFST
t-PDLBCMFDPOUSPMTBOETFDVSJUZTFUUJOHT
t64#QPSUGPSMPBEJOHQSFTFUTBOEFYUFSOBM
TFUVQBEKVTUNFOU
t9-3UISVDPOOFDUPSDBOCFTXJUDIFECFUXFFO
QSPDFTTFEPSESZTJHOBM
100% Crest Audio.
75% Lighter.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
ACCESSORIES
EPS™-3 and EPS™-8 External Power Supplies for Crest Consoles
PSU to Console Cable / PSU to PSU Cable
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
NexSys® Series
AMPLIFIER CONTROL OPTIONS
NexSys® is scalable and features signal processing, output monitoring,
speaker control, amplifier system fault monitoring, real-time control
of amplifier and signal processing settings and virtually unlimited
snapshot and automation capabilities.
Nx ETHERNET MODULE
OPTIONAL MODULE FOR NEXSYS
CONTROL OF CKi AMPLIFIERS
t(BJODPOUSPM
t4FRVFOUJBMQPXFS
t"NQMJöFSNPOJUPSJOH
t"VEJPSFUVSOWJB&UIFSOFU
t3FBMUJNFMPBENPOJUPSJOHVTFTQSPHSBNBVEJPNVTJD
UPDPOUJOVBMMZNPOJUPSUIFTQFBLFSJNQFEBODF
t4BNQMFTJOUIFGSFRVFODZTQFDUSVNBSFDPNQBSFEJOSFBMUJNFUPHJWFUFTUBTBDDVSBUFJNQFEBODFWTGSFRVFODZQMPUT
t-&%EJTQMBZFOBCMFTJOSBDLSFBEPVUBOENPOJUPSJOHPGUFNQFSBUVSFHBJO"$WPMUBHFNVUFBOEGBVMUTUBUVT
t.VMUJQMFQPJOUTPGDPOUSPM
t&YQBOTJPODPOOFDUPSGPS/Y%41PQUJPO
Nx COBRANET MODULE
OPTIONAL MODULE FOR NEXSYS
CONTROL AND COBRANET DIGITAL
AUDIO
t#SJOHTUXPDIBOOFMTPGBVEJPUPUIFBNQMJöFSWJB
$PCSB/FU
t1FSGPSNTUIFGVMMTVJUFPG/FY4ZTGVODUJPOTBUUIFTBNF
UJNFJEFOUJDBMUP/Y&UIFSOFU
t$POUSPM%BUBBOE"VEJPBSFPOUIFTBNFXJSFPOMZPOFDBCMFOFFETUPCFSPVUFEUPFBDIBNQMJöFSESBNBUJDBMMZSFEVDJOHXJSFOFTUBOEDPNQMFYJUZ
Nx DSP
OPTIONAL DSP FOR NEXSYS
CONTROL AND COBRANET DIGITAL
AUDIO
t&JHIUDIBOOFMMJOFMFWFMPVUQVUTXJUIUIFBCJMJUZUPEJTUSJCVUF
%41QSPDFTTFETJHOBMTUPOPO/FY4ZTBNQMJöFST
t&JHIUDIBOOFMTPGEJHJUBMTJHOBMTQFBLFSQSPDFTTJOH
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
NexSys® Series
AMPLIFIER CONTROL OPTIONS
All NexSys® devices can be configured and monitored by Crest Audio’s NexSys 4 software or by MediaMatrix®
MWare™ or NWare™ software.
Nx COBRANET-8 MODULE
OPTIONAL MODULE FOR NEXSYS
CONTROL OF Ci AMPLIFIERS
t#SJOHTFJHIUDIBOOFMTPGBVEJPWJB$PCSB/FU¥UPUIFBNQMJöFS
t1FSGPSNTUIFGVMMTVJUFPG/FY4ZTGVODUJPOTBUUIFTBNFUJNF
JEFOUJDBMUP/Y&UIFSOFU
t$POUSPMEBUBBOEBVEJPBSFPOUIFTBNFXJSFPOMZPOFDBCMF
OFFETUPCFSPVUFEUPFBDIBNQMJöFSESBNBUJDBMMZSFEVDJOH
XJSFOFTUBOEDPNQMFYJUZ
t&JHIUDIBOOFMTPGEJHJUBMTJHOBMTQFBLFSQSPDFTTJOH
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
HP™ CONSOLES
BREAKTHROUGH CONSOLE PERFORMANCE
The new HP Series consoles bring Crest Audio performance, new features and smart design to worship, small theater and related
markets. With state-of-the-art analog electronics and innovative features such as integral automatic mixing, stereo input channels,
stereo returns, a unique ambient mic input and a robust eight-group design, the HP Series is a great choice for any fixed installation. A powerful aux configuration with 10 aux busses, versatile connectivity and a unique “fader flip” feature provide the flexible
routing required in demanding system designs. Complete with a talkback system and up to eight “smart” mute groups, modular
construction, integral power supply and a robust chassis design, the HP Series is the new standard and the latest innovation from
a legendary console designer.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
HPW™ CONSOLES
BREAKTHROUGH CONSOLE PERFORMANCE
The HP-W console shares the diligent research and
insight that inspired Crest Audio’s HP-Eight consoles.
Incorporating more features and flexibility to the HP-W
while maintaining the audio quality and rugged build
design the HP-Eight is known for. The HP-W is a perfect
solution for such application as fixed installations,
churches, stadiums, auditoriums, theater and corporate
AV. Easy to use, flexibility and affordability makes the
HP-W is a premier choice for the job.
The HP-W is packed with many innovative features.
HP-W has four stereo line input channels, which can
be handled in a dual mono or split track application.
With a pre source balance control, a discrete blend of
the split track can then be sent to stage monitors via
the aux sends. A second blend of the split track can be
sent to the FOH system via the Left/Right mono busses
by using the post source balance control.
Every channel on the HP-W is equipped with 48 volt
phantom power, pad, polarity switches and PFL’s
options. In addition to an input gain control, four-band
EQ is also provided with fixed high and low frequency
points and sweep frequency control on the two mid
bands. 10 auxiliary sends and Bus assignment, L/R, and
Mono switches are also provided in addition to the 8
channel mute groups system and 100 mm faders.
.0/0
$)"//&-
45&3&0
$)"//&-
."45&34&$5*0/
"650.*9
$)"//&-
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
HP W™ 4&3*&4
20, 28, 36, 44, OR 52 MONO INPUT CHANNELS
tPSTUBOEBSE.POPJOQVU
channels (optional eight channels with gain
sharing Automix®*-+4 stereo channels)
t9-3BOEwDPOOFDUPSTPOBMMJOQVUT
'SFRVFODZ3FTQPOTF
Input to Group or Main Output (Left/Right/Mono)
<.01% THD 20Hz to 20kHz at 15dBu out
/PJTF
(22Hz to 20kHz)
Mic EIN: <-127 dBu
Bus Noise: Better than –80dBu (32 chan routed)
Residual output noise: <-90dBu
t5XPTUFSFPMJOFSFUVSOTPONNGBEFSTXJUI
assignment and two aux sends
t0OFTUFSFPBNCJFOUNJDJOQVU
$SPTTUBML
t&JHIUBOBMPHTVCHSPVQT
tBVYFT
t9-3DPOOFDUPSTPOBVYPVUQVUT
t-FGU3JHIU.POPPVUQVUT
1IBTF4IJGU
9-3*OQVUT
.BJO0VUQVUT
t9NBUSJY
t5XPBMUFSOBUFPVUQVUTUIBUDBOCFTPVSDFEGSPN
L, R, M or Matrix outputs with full dynamics
*OTFSU1PJOUT
ti'BEFSøJQwGVODUJPOPOBVYPVUQVUTQMBDFTBVY
masters on 100 mm faders in place of groups
-3
1PXFS4VQQMZ
tNNIJHIRVBMJUZGBEFSTPONPOPJOQVUT
auto mix inputs, stereo inputs, groups and
separate left, right and mono outputs
t&JHIUNJDSPQSPDFTTPSDPOUSPMMFENVUFHSPVQT
and scenes
t'VMMUBMLCBDLBOENPOJUPSTZTUFNT
20Hz – 20kHz +0/-0.ddB (Ref 1kHz) any input to any output
5)%/PJTF
%JNFOTJPOT8FJHIU
HP-W 52
Channel Mute: >90dB
Channel Routing: >85dB
Channel fader attenuation: >85dB
Aux Send attenuation: >80dB
<+/-30 degrees 20Hz to 20kHz mic into main out
2.5kΩ ohms Balanced
Max Voltage Gain: Mic-In to Group to Left/Right Balanced Out=90dB
L/R/Mono/Aux: 100Ω Balanced Male XLR
Max Output = +28dBu
Group: 50Ω Gnd-Compenstated/Impedance BAL TRS
Max Output = +22dBu
TRS Jack
Tip = Send, Ring = Return
Channel Insert level = +4dBu
Bus Insert Levels = -2dBu
Internal: 100-240 VAC, 50/60 Hz via IEC Mains Connector
External: 7-Pin DC connector provided for redundant PSU
Inches: 86 x 28 x 9 MM: 2171 x 702 x 229
145 lbs 66 kG
HP-W 44
Inches: 76 x 28 x 9 MM: 922 x 702 x 229
125 lbs 57 kG
HP-W 36
t.PEVMBSJOQVUCMPDLTPGFJHIUDIBOOFMTGPSFBTF
of service
Inches: 66 x 28 x 9 MM: 1673 x 702 x 229
110 lbs 50 kG
HP-W 28
t*OUFSOBMVOJWFSTBMQPXFSTVQQMZXJUI%$
connector for external, redundant supply
Inches: 56.5 x 28 x 9 MM: 424 x 702 x 229
90 lbs 41kG
HP-W 20
Inches: 46.5 x 28 x 9 MM: 1175 x 702 x 229
72 lbs 33 kG
*Automix modules available with 20 and 52 input channel frames as
custom configurations
Dimensions are Width x Depth (Front-to-Back) x Height, rounded up the
the nearest 1/2 inch or nearest MM
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
HP™ 8 CONSOLES
BREAKTHROUGH CONSOLE PERFORMANCE
The new HP Series consoles bring Crest Audio
performance, new features and smart design to worship,
small theater and related markets. With state-of-theart analog electronics and innovative features such as
integral automatic mixing, stereo input channels, stereo
returns, a unique ambient mic input and a robust eightgroup design, the HP Series is a great choice for any
fixed installation. A powerful aux configuration with 10
aux busses, versatile connectivity and a unique “fader
flip” feature provide the flexible routing required in
demanding system designs. Complete with a talkback
system and up to eight “smart” mute groups, modular
construction, integral power supply and a robust chassis
design, the HP Series is the new standard and the latest
innovation from a legendary console designer.
WHERE
EXTREME FLEXIBILITY AS WELL AS EXACTING AUDIO
PERFORMANCE IS REQUIRED, THE
HP-EIGHT DELIVERS THOSE
ATTRIBUTES AND MORE TO THE BUDGET-CONSCIOUS INSTALLER AND
END USER.
.0/0$)"/
/&-
."45&34&$5*0/
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
HP-8™ 4&3*&4
24, 32, 40, 48 OR 56 MONO INPUT CHANNELS
tPS.POPJOQVUDIBOOFMT
tBOBMPHTVCHSPVQT
tBVYFT
'SFRVFODZ3FTQPOTF
Input to Group or Main Output (Left/Right/Mono)
<.01% THD 20Hz to 20kHz at 15dBu out
/PJTF
(22Hz to 20kHz)
Mic EIN: <-127 dBu
Bus Noise: Better than –80dBu (32 chan routed)
Residual output noise
t-FGU3JHIU.POPPVUQVUT
t'JWFTUFSFPMJOFJOQVUTPONNGBEFSTXJUI&2
assignment and two aux sends
t.POPJOQVUDIBOOFMTIBWFJOEJWJEVBM7
phantom power, pad, polarity reverse and lowDVUöMUFSTXJUDIFTXJUIBGPVSCBOEFRVBMJ[FS
featuring high and low shelving and two
PWFSMBQQJOHCBOETPGTXFQUNJEGSFRVFODJFT
tJOEFQFOEFOUBVYTFOETPOUIFNPOPJOQVU
channels allows the HP-Eight to be used as a
monitor mixer
ti'BEFSøJQwGVODUJPOPOBVYPVUQVUTQMBDFTBVY
NBTUFSTPONNGBEFSTJOQMBDFPGHSPVQT
-3
20Hz – 20kHz +0/-0.5dB (Ref 1kHz) Any input to any output
5)%/PJTF
$SPTTUBML
1IBTF4IJGU
9-3*OQVUT
.BJO0VUQVUT
*OTFSU1PJOUT
tNNIJHIRVBMJUZGBEFSTPONPOPJOQVUT
groups and separate left, right and mono
outputs
1PXFS4VQQMZ
t'PVSDIBOOFMTDFOFNVUFTZTUFNXJUINBTUFS
switches and LED indicators
%JNFOTJPOT8FJHIU
HP-W 52
Channel Mute: >90dB
Channel Routing: >85dB
Channel fader attenuation: >85dB
Aux Send attenuation: >80dB
<+/-30 degrees 20kHz mic into main out
2.5k ohms Balanced
Max Voltage Gain: Mic-In to Group to Left/Right Balanced Out=90dB
L/R/Mono/Aux: 100Ω Balanced Male XLR
Max Output = +28dBu
Aux/Group: 50Ω gnd-Compenstated/Impedance Bal TRS
Max Output = +22dBu
TRS Jack
Tip = Send, Ring = Return
Channel Insert level = +4dBu
Bus Insert Levels = -2dBu
Internal: 100-240 VAC, 50/60 Hz via IEC Mains Connector
External: 7-Pin DC connector provided for redundant PSU
Inches: 86 x 28 x 9 MM: 2171 x 702 x 229
145 lbs 66 kG
t'VMMUBMLCBDLBOENPOJUPSTZTUFNT
HP-W 44
t.PEVMBSJOQVUCMPDLTPGFJHIUDIBOOFMTGPSFBTF
of service
Inches: 76 x 28 x 9 MM: 922 x 702 x 229
125 lbs 57 kG
HP-W 36
Inches: 66 x 28 x 9 MM: 1673 x 702 x 229
110 lbs 50 kG
HP-W 28
Inches: 56.5 x 28 x 9 MM: 424 x 702 x 229
90 lbs 41kG
HP-W 20
Inches: 46.5 x 28 x 9 MM: 1175 x 702 x 229
72 lbs 33 kG
t*OUFSOBMVOJWFSTBMQPXFSTVQQMZXJUI%$
connector for external, redundant supply
t5XPDIBOOFMNBUSJYTZTUFNGFEQSFPSQPTUGSPN
BMMFJHIUTVCHSPVQTBOEUIFUISFFNBJO-3
Mono) mix busses
Dimensions are Width x Depth (Front-to-Back) x Height, rounded up the
the nearest 1/2 inch or nearest MM
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
HPWA™ CONSOLES
BREAKTHROUGH CONSOLE PERFORMANCE
Crest Audio is proud to introduce the
NEW HP-WA console. The HP-WA console
shares the diligent research and insight
that inspired Crest Audio’s HP-Eight consoles. Incorporating more features and
flexibility to the HP-WA while maintaining
the audio quality and rugged build design the HP-Eight is known for. The HP-WA
is a perfect solution for such application
as fixed installations, churches, stadiums,
auditoriums, theater and corporate AV.
Easy to use, flexibility and affordability
makes the HP-WA is a premier choice for
the job.
The HP-WA is packed with many innovative features. HP-WA has four stereo line
input channels, which can be handled
in a dual mono or split track application.
With a pre source balance control, a discrete “blend” of the split track can then be
sent to stage monitors via the aux sends.
A second “blend” of the split track can be
sent to the FOH system via the Left/Right
mono busses by using the post source
balance control.
Standard on all HP-WA consoles are 8
mono channels of AutoMix for “handsoff” spoken word mixing applications.
With a push of a button to activate the
AutoMix feature, the HP-W will automatically reduce the gain on microphones
not being used, which nearly eliminates
feedback. Having the AutoMix feature engaged will also diminish surrounding low
frequencies and eradicate the chances of
comb filtering. With or without the Auto-
Mix enabled you can control the thresh
hold of the compressors which are on the
8 AutoMix channels.
Every channel on the HP-WA is equipped
with 48 volt phantom power, pad, polarity switches and PFL’s options. In addition
to an input gain control, four-band EQ
is also provided with fixed high and low
frequency points and sweep frequency
control on the two mid bands. 10 auxiliary
sends and Bus assignment, L/R, and Mono
switches are also provided in addition to
the 8 channel mute groups system and
100 mm faders.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
HP-WA™ 4&3*&4
28, 36 OR 44 MONO INPUT CHANNELS
tPSTUBOEBSE.POPJOQVUDIBOOFMT
(optional eight channels with gain sharing
Automix®*-+4 stereo channels)
t9-3BOEwDPOOFDUPSTPOBMMJOQVUT
'SFRVFODZ3FTQPOTF
Input to Group or Main Output (Left/Right/Mono)
<.01% THD 20Hz to 20kHz at 15dBu out
/PJTF
(22Hz to 20kHz)
Mic EIN: <-127 dBu
Bus Noise: Better than –80dBu (32 chan routed)
Residual output noise: <-90dBu
t5XPTUFSFPMJOFSFUVSOTPONNGBEFSTXJUI
assignment and two aux sends
t0OFTUFSFPBNCJFOUNJDJOQVU
$SPTTUBML
t&JHIUBOBMPHTVCHSPVQT
tBVYFT
t9-3DPOOFDUPSTPOBVYPVUQVUT
t-FGU3JHIU.POPPVUQVUT
1IBTF4IJGU
9-3*OQVUT
.BJO0VUQVUT
t9NBUSJY
t5XPBMUFSOBUFPVUQVUTUIBUDBOCFTPVSDFEGSPN
L, R, M or Matrix outputs with full dynamics
*OTFSU1PJOUT
ti'BEFSøJQwGVODUJPOPOBVYPVUQVUTQMBDFTBVY
masters on 100 mm faders in place of groups
-3
1PXFS4VQQMZ
tNNIJHIRVBMJUZGBEFSTPONPOPJOQVUT
auto mix inputs, stereo inputs, groups and
separate left, right and mono outputs
t&JHIUNJDSPQSPDFTTPSDPOUSPMMFENVUFHSPVQT
and scenes
t'VMMUBMLCBDLBOENPOJUPSTZTUFNT
20Hz – 20kHz +0/-0.ddB (Ref 1kHz) any input to any output
5)%/PJTF
%JNFOTJPOT8FJHIU
HP-W 52
Channel Mute: >90dB
Channel Routing: >85dB
Channel fader attenuation: >85dB
Aux Send attenuation: >80dB
<+/-30 degrees 20Hz to 20kHz mic into main out
2.5kΩ ohms Balanced
Max Voltage Gain: Mic-In to Group to Left/Right Balanced Out=90dB
L/R/Mono/Aux: 100Ω Balanced Male XLR
Max Output = +28dBu
Group: 50Ω Gnd-Compenstated/Impedance BAL TRS
Max Output = +22dBu
TRS Jack
Tip = Send, Ring = Return
Channel Insert level = +4dBu
Bus Insert Levels = -2dBu
Internal: 100-240 VAC, 50/60 Hz via IEC Mains Connector
External: 7-Pin DC connector provided for redundant PSU
Inches: 86 x 28 x 9 MM: 2171 x 702 x 229
145 lbs 66 kG
HP-W 44
Inches: 76 x 28 x 9 MM: 922 x 702 x 229
125 lbs 57 kG
HP-W 36
t.PEVMBSJOQVUCMPDLTPGFJHIUDIBOOFMTGPSFBTF
of service
Inches: 66 x 28 x 9 MM: 1673 x 702 x 229
110 lbs 50 kG
HP-W 28
t*OUFSOBMVOJWFSTBMQPXFSTVQQMZXJUI%$
connector for external, redundant supply
Inches: 56.5 x 28 x 9 MM: 424 x 702 x 229
90 lbs 41kG
HP-W 20
Inches: 46.5 x 28 x 9 MM: 1175 x 702 x 229
72 lbs 33 kG
*Automix modules available with 20 and 52 input channel frames as
custom configurations
Dimensions are Width x Depth (Front-to-Back) x Height, rounded up the
the nearest 1/2 inch or nearest MM
I]ZEgd[Zhh^dcVaHiVcYVgY;dg(% NZVgh
X-SERIES™ CONSOLES
THE DIFFERENCE IS CLEAR
AVAILABLE
IN MAIN AND MONITOR CONFIGURATIONS,
X-S ERIES CONSOLES ARE AVAILABLE WITH UP TO 12
MONO AND UP TO FOUR STEREO INPUTS. LONG THROW
FADERS, VERSATILE FOUR - BAND SEMI - PARAMETRIC EQ,
CHANNEL INSERTS AND HIGH - QUALITY MICROPHONE
PREAMPLIFIERS ARE STANDARD.
The Crest Audio® X-Series™ is regarded as the most sonically accurate
and operationally quiet, professional-level, rack-mountable console
range in the audio industry. With high-end performance and rocksolid construction, the X-Series features a modular design and an
extensive feature set suitable for any application. Available in main
and monitor configurations, X-Series models feature up to 14 mono
and four stereo inputs. Long-throw faders, versatile four-band
semi-parametric EQ, channel inserts and high-quality microphone
preamplifiers are standard. The X 18R and X 20R consoles have six
configurable aux buses and three main buses that provide plenty
of front-of-house mixing configurations, while the X 18RM and X
20RM have up to 12 mono or six stereo mix buses for floor or in-ear
monitoring.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
X-SERIES CONSOLES
X 18R™ / X 20R™ / X 18RM™ / X 20RM™
93™BOE93™
X18R™ and X20R™
tNPOPJOQVUTTUFSFPJOQVUT
(X 18R) or 12 mono inputs + 4
stereo inputs (X 20R), all with
NJDQSFBNQTBOEJOEJWJEVBM7
phantom power switches
'SFRVFODZ3FTQPOTF
5)%/PJTF
/PJTF
$SPTTUBML
tNNGBEFSTPOBMMJOQVUTBOE
Left, Right and Mono (center)
outputs; 60 mm faders on the
four subgroups
t*OTFSUPOBMMJOQVUTTVCHSPVQT
BVYPVUTBOE-3.PVUQVUT
1IBTF4IJGU
.JDJO
-JOFJO9-3BOE534
3$"UBQFJOQVU
#VTJOQVUT
-3.PVUQVUT
(SPVQEJSFDUPVU
"VYPVUQVUT
)FBEQIPOFT
t4JYBVYCVTFTTFMFDUBCMFQSFPS
post fader in pairs
1PXFS4VQQMZ
%JNFOTJPOT8FJHIU
t'PVSCBOE&2POBMMJOQVUT
tE#QFSPDUBWFIJHIQBTTöMUFST
on mono input channels
t"VYFTBSFDPOöHVSFEBT
-FWFM1BOGPSTUFSFPPQFSBUJPO
2+0/-1dB 20 HZ-20kHz ref 1 kHz (Any input to any output)
Any output <0.01% THD 20Hz-20kHz @ +15dBu out
Mic in < -128dBu 20 Hz to 20kHz
150 ohm source, 60 dB gain
Channel Mute: >90dB
Channel Routing: >80dB
Channel fader attenuation: >90dB
Aux Send attenuation: >85dB
<+/-30 degrees 20 Hz to 20kHz mic-in to main out
XLR 4k Ω balanced max voltage gain to main outputs = 98dB
>10k Ω balanced
>10k Ω unbalanced
>10k Ω balanced
XLR 100 Ω balanced (Switchable between line or mic level)
TRS 50 Ω ground compensation
XLR & TRS 50 Ω ground compensation
1/4”TRS to drive > 8 Ω phones
Bus Insert Levels = -2dBu
Internal: 100-240 VAC, 50/60 Hz
Inches: 17.5” x 19” x 4.5” in depth behind panel
30.5 lbs
93.™BOE93.™
'SFRVFODZ3FTQPOTF
5)%/PJTF
/PJTF
t9-3-3.POPPVUQVUT
switchable between line and
mic level
tžw534BOE3$"DPOOFDUPST
provided on alt output, monitor
output and tape input
$SPTTUBML
X-18RM™ and X-20RM™
tNPOPJOQVUTTUFSFPJOQVUT
(X-18RM) or 12 mono inputs + 4
stereo inputs (X-20RM), all with
NJDQSFBNQTBOEJOEJWJEVBM7
phantom power switches
1IBTF4IJGU
9-3JOQVUT
.BYWPMUBHFHBJO
-JOFJO534
9-3534DPNJOQVU
#VTJOQVUT
.JYPVUQVUT
.POJUPSPVUQVUT
)FBEQIPOFT
1PXFS4VQQMZ
%JNFOTJPOT8FJHIU
t#VJMUJOTQMJUUFSTZTUFNPOBMM
9-3NJDMJOFJOQVUTXJUIHSPVOE
switches on each input channel
tNPOJUPSCVTFTUIBUDBOCF
configured mono or stereo in
pairs
20 Hz-20 kHz +0/-1 dB Any input to any output (ref 1 kHz)
Any output <0.01% THD 20 Hz-20 kHz @ +15 dBu out
(22 Hz to 22 kHz bandwidth) Mic EIN: <-128 dBu
(Measured @ +60 dB gain, 150 Ω source)
Bus Noise: Below -85 dBu (w/32 channels routed)
Channel Mute: >90dB
Channel Routing: >80dB
Channel fader attenuation: >90dB
Aux Send attenuation: >85dB
<+/-30 degrees 20 Hz to 20kHz mic-in to main out
XLR 4k Ω balanced
Max voltage gain to mix outs = 92 dB
10k Ω balanced
10k Ω balanced
10k Ω balanced
XLR, 100 Ω balanced
XLR & TRS 100 Ω balanced
Stereo, intended to drive > 8 Ω phones
Internal: 100-240 VAC, 50/60 Hz via 15A IEC Mains connector
Inches: 17.5” x 19” x 4.5” in depth behind panel
30 lbs
Dimensions are Width x Depth (Front-to-Back) x Height
t"EEJUJPOBMiTUFSFPDPNNPO
JOQVUwGPSTFOEJOHDMJDLPS
reference tracks to artists on all
12 buses
t'PVSCBOENJETXFFQ&2GPS
mono and stereo input channels
tE#QFSPDUBWFIJHIQBTTöMUFS
on mono input channels
t'VMMZCBMBODFE9-3PVUQVUTBOE
XLR balanced bus inputs
t4PMPMJOLTZTUFNDPNQBUJCMFXJUI
other X-Series rack mixers
tTQBDFSBDLNPVOU
configuration
.0/0
$)"//&-
45&3&0
$)"//&-
."45&34&$5*0/
t*OUFSOBMVOJWFSTBMQPXFSTVQQMZ
93BOE933FBS1BOFM
Download PDF